diff options
author | 张鹏 <sd20@qxwlan.com> | 2018-07-17 18:11:21 +0800 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-07-30 14:02:40 +0200 |
commit | 11a5128b983fdc78ffeac063bf9060116cad281b (patch) | |
tree | 87e96f48eba513f0bd0eec74fb80f542961b0133 /target/linux/cns3xxx | |
parent | 21ad5fb1eafd33f82850c18d1df3b247fce17e0e (diff) | |
download | upstream-11a5128b983fdc78ffeac063bf9060116cad281b.tar.gz upstream-11a5128b983fdc78ffeac063bf9060116cad281b.tar.bz2 upstream-11a5128b983fdc78ffeac063bf9060116cad281b.zip |
ar71xx:add support for E750A v4
Qxwlan E750A v4 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 5G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
(cherry picked from commit ac03d51a3f4daa2f6a2a83f041dcd71674a9f724)
Diffstat (limited to 'target/linux/cns3xxx')
0 files changed, 0 insertions, 0 deletions