kernel: bump 4.14 to 4.14.59

Drop patch that was superseded upstream:
ramips/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch

Drop upstreamed patches:
- apm821xx/020-0001-crypto-crypto4xx-remove-bad-list_del.patch
- apm821xx/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch
- ath79/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
- brcm63xx/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
- brcm63xx/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
- generic/backport/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch
- generic/pending/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch
- generic/pending/900-gen_stats-fix-netlink-stats-padding.patch

In 4.14.55, a patch was introduced that breaks ext4 images in some
cases. The newly introduced patch
backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch
addresses this breakage.

Fixes the following CVEs:
- CVE-2018-10876
- CVE-2018-10877
- CVE-2018-10879
- CVE-2018-10880
- CVE-2018-10881
- CVE-2018-10882
- CVE-2018-10883

Compile-tested: ath79, octeon, x86/64
Runtime-tested: ath79, octeon, x86/64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

2 files changed, 0 insertions, 130 deletions

diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
deleted file mode 100644
index bd66e72c91..0000000000
--- a/target/linux/brcm63xx/patches-4.14/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From d0423d3e4fa7ae305729cb50369427f075ccb279 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 25 Feb 2017 12:41:28 +0100
-Subject: [PATCH 1/6] bcm63xx_enet: correct clock usage
-
-Check the return code of prepare_enable and change one last instance of
-enable only to prepare_enable. Also properly disable and release the
-clock in error paths and on remove for enetsw.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 31 +++++++++++++++++++++-------
- 1 file changed, 23 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1773,7 +1773,9 @@ static int bcm_enet_probe(struct platfor
- 		ret = PTR_ERR(priv->mac_clk);
- 		goto out;
- 	}
--	clk_prepare_enable(priv->mac_clk);
-+	ret = clk_prepare_enable(priv->mac_clk);
-+	if (ret)
-+		goto out_put_clk_mac;
- 
- 	/* initialize default and fetch platform data */
- 	priv->rx_ring_size = BCMENET_DEF_RX_DESC;
-@@ -1805,9 +1807,11 @@ static int bcm_enet_probe(struct platfor
- 		if (IS_ERR(priv->phy_clk)) {
- 			ret = PTR_ERR(priv->phy_clk);
- 			priv->phy_clk = NULL;
--			goto out_put_clk_mac;
-+			goto out_disable_clk_mac;
- 		}
--		clk_prepare_enable(priv->phy_clk);
-+		ret = clk_prepare_enable(priv->phy_clk);
-+		if (ret)
-+			goto out_put_clk_phy;
- 	}
- 
- 	/* do minimal hardware init to be able to probe mii bus */
-@@ -1901,13 +1905,16 @@ out_free_mdio:
- out_uninit_hw:
- 	/* turn off mdc clock */
- 	enet_writel(priv, 0, ENET_MIISC_REG);
--	if (priv->phy_clk) {
-+	if (priv->phy_clk)
- 		clk_disable_unprepare(priv->phy_clk);
-+
-+out_put_clk_phy:
-+	if (priv->phy_clk)
- 		clk_put(priv->phy_clk);
--	}
- 
--out_put_clk_mac:
-+out_disable_clk_mac:
- 	clk_disable_unprepare(priv->mac_clk);
-+out_put_clk_mac:
- 	clk_put(priv->mac_clk);
- out:
- 	free_netdev(dev);
-@@ -2752,7 +2759,9 @@ static int bcm_enetsw_probe(struct platf
- 		ret = PTR_ERR(priv->mac_clk);
- 		goto out_unmap;
- 	}
--	clk_enable(priv->mac_clk);
-+	ret = clk_prepare_enable(priv->mac_clk);
-+	if (ret)
-+		goto out_put_clk;
- 
- 	priv->rx_chan = 0;
- 	priv->tx_chan = 1;
-@@ -2773,7 +2782,7 @@ static int bcm_enetsw_probe(struct platf
- 
- 	ret = register_netdev(dev);
- 	if (ret)
--		goto out_put_clk;
-+		goto out_disable_clk;
- 
- 	netif_carrier_off(dev);
- 	platform_set_drvdata(pdev, dev);
-@@ -2782,6 +2791,9 @@ static int bcm_enetsw_probe(struct platf
- 
- 	return 0;
- 
-+out_disable_clk:
-+	clk_disable_unprepare(priv->mac_clk);
-+
- out_put_clk:
- 	clk_put(priv->mac_clk);
- 
-@@ -2813,6 +2825,9 @@ static int bcm_enetsw_remove(struct plat
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	release_mem_region(res->start, resource_size(res));
- 
-+	clk_disable_unprepare(priv->mac_clk);
-+	clk_put(priv->mac_clk);
-+
- 	free_netdev(dev);
- 	return 0;
- }
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
deleted file mode 100644
index 22b3a732f9..0000000000
--- a/target/linux/brcm63xx/patches-4.14/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 23d94cb855b6f4f0ee1c01679224472104ac6440 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 30 Sep 2017 14:10:18 +0200
-Subject: [PATCH 2/6] bcm63xx_enet: do not write to random DMA channel on
- BCM6345
-
-The DMA controller regs actually point to DMA channel 0, so the write to
-ENETDMA_CFG_REG will actually modify a random DMA channel.
-
-Since DMA controller registers do not exist on BCM6345, guard the write
-with the usual check for dma_has_sram.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1062,7 +1062,8 @@ static int bcm_enet_open(struct net_devi
- 	val = enet_readl(priv, ENET_CTL_REG);
- 	val |= ENET_CTL_ENABLE_MASK;
- 	enet_writel(priv, val, ENET_CTL_REG);
--	enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-+	if (priv->dma_has_sram)
-+		enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
- 	enet_dmac_writel(priv, priv->dma_chan_en_mask,
- 			 ENETDMAC_CHANCFG, priv->rx_chan);
-