brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 179 deletions

diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
deleted file mode 100644
index cc1660aa25..0000000000
--- a/target/linux/brcm63xx/image/Makefile
+++ /dev/null
@@ -1,179 +0,0 @@
-#
-# Copyright (C) 2006-2015 OpenWrt.org
-# Copyright (C) 2016 LEDE project
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-LOADADDR = 0x80010000		# RAM start + 64K
-KERNEL_ENTRY = $(LOADADDR)	# Newer kernels add a jmp to the kernel_entry at the start of the binary
-LOADER_ENTRY = 0x80a00000	# RAM start + 10M, for relocate
-RAMSIZE = 0x02000000		# 32MB
-LZMA_TEXT_START = 0x81800000	# 32MB - 8MB
-
-LOADER_MAKEOPTS= \
-		KDIR=$(KDIR) \
-		LOADADDR=$(LOADADDR) \
-		KERNEL_ENTRY=$(KERNEL_ENTRY) \
-		RAMSIZE=$(RAMSIZE) \
-		LZMA_TEXT_START=$(LZMA_TEXT_START) \
-
-RELOCATE_MAKEOPTS= \
-		CACHELINE_SIZE=16 \
-		KERNEL_ADDR=$(KERNEL_ENTRY) \
-		CROSS_COMPILE=$(TARGET_CROSS) \
-		LZMA_TEXT_START=$(LOADER_ENTRY)
-
-define Build/Compile
-	rm -rf $(KDIR)/relocate
-	$(CP) ../../generic/image/relocate $(KDIR)
-	$(MAKE) -C $(KDIR)/relocate $(RELOCATE_MAKEOPTS)
-endef
-
-### Kernel scripts ###
-define Build/hcs-initramfs
-	$(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_bytes=$(HCS_MAGIC_BYTES) \
-		--rev_maj=$(HCS_REV_MAJ) --rev_min=$(HCS_REV_MIN) --input_file=$@ \
-		--output_file=$@.hcs --ldaddress=$(LOADADDR)
-	mv $@.hcs $@
-endef
-
-define Build/loader-lzma
-	rm -rf $@.src
-	$(MAKE) -C lzma-loader \
-		$(LOADER_MAKEOPTS) \
-		PKG_BUILD_DIR="$@.src" \
-		TARGET_DIR="$(dir $@)" \
-		LOADER_DATA="$@" \
-		LOADER_NAME="$(notdir $@)" \
-		compile loader.$(1)
-	mv "$@.$(1)" "$@"
-	rm -rf $@.src
-endef
-
-define Build/lzma
-	# CFE is a LZMA nazi! It took me hours to find out the parameters!
-	# Also I think lzma has a bug cause it generates different output depending on
-	# if you use stdin / stdout or not. Use files instead of stdio here, cause
-	# otherwise CFE will complain and not boot the image.
-	$(STAGING_DIR_HOST)/bin/lzma e $@ -d22 -fb64 -a1 $@.lzma
-	mv $@.lzma $@
-endef
-
-define Build/lzma-cfe
-	# Strip out the length, CFE doesn't like this
-	dd if=$@ of=$@.lzma.cfe bs=5 count=1
-	dd if=$@ of=$@.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
-	mv $@.lzma.cfe $@
-endef
-
-define Build/relocate-kernel
-	# CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed
-	# kernel might get larger than that, so let CFE unpack and load at a
-	# higher address and make the kernel relocate itself to the expected
-	# location.
-	( \
-		dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \
-		perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
-		cat $@ \
-	) > $@.relocate
-	mv $@.relocate $@
-endef
-
-### Image scripts ###
-define rootfspad/jffs2-128k
---align-rootfs
-endef
-define rootfspad/jffs2-64k
---align-rootfs
-endef
-define rootfspad/squashfs
-endef
-
-define Image/LimitName16
-$(shell expr substr "$(1)" 1 16)
-endef
-
-define Image/FileSystemStrip
-$(firstword $(subst +,$(space),$(subst root.,,$(notdir $(1)))))
-endef
-
-define Build/cfe-bin
-	$(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
-		--output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
-		--entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
-		--info1 "$(call Image/LimitName16,$(DEVICE_NAME))" \
-		--info2 "$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))" \
-		$(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \
-		$(CFE_EXTRAS) $(1)
-endef
-
-define Build/cfe-old-bin
-	$(TOPDIR)/scripts/brcmImage.pl -t -p \
-		-o $@ -b $(CFE_BOARD_ID) -c $(CFE_CHIP_ID) \
-		-e $(LOADER_ENTRY) -a $(LOADER_ENTRY) \
-		-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) \
-		$(CFE_EXTRAS)
-endef
-
-define Build/cfe-spw303v-bin
-	$(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
-		--output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
-		--entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
-		$(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \
-		$(CFE_EXTRAS) $(1)
-endef
-
-define Build/spw303v-bin
-	$(STAGING_DIR_HOST)/bin/spw303v -i $@ -o $@.spw303v
-	mv $@.spw303v $@
-endef
-
-define Build/zyxel-bin
-	$(STAGING_DIR_HOST)/bin/zyxbcm -i $@ -o $@.zyxel
-	mv $@.zyxel $@
-endef
-
-define Build/redboot-bin
-	# Prepare kernel and rootfs
-	dd if=$(IMAGE_KERNEL) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz bs=65536 conv=sync
-	dd if=$(IMAGE_ROOTFS) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS)) bs=64k conv=sync
-	echo -ne \\xDE\\xAD\\xC0\\xDE >> $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS))
-	# Generate the scripted image
-	$(TOPDIR)/scripts/redboot-script.pl \
-		-k $(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz \
-		-r $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS)) \
-		-a $(strip $(LOADER_ENTRY)) -f 0xbe430000 -l 0x7c0000 \
-		-s 0x1000 -t 20 -o $@.redbootscript
-	dd if="$@.redbootscript" of="$@.redbootscript.padded" bs=4096 conv=sync
-	cat \
-		"$@.redbootscript.padded" \
-		"$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz" \
-		"$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS))" \
-		> "$@"
-endef
-
-define Device/Default
-  PROFILES = Default $$(DEVICE_NAME)
-  KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
-  KERNEL_INITRAMFS_SUFFIX := .elf
-  DEVICE_DTS_DIR := ../dts
-  SOC = bcm$$(CFE_CHIP_ID)
-  DEVICE_DTS = $$(SOC)-$(subst _,-,$(1))
-endef
-
-ATH5K_PACKAGES := kmod-ath5k wpad-basic
-ATH9K_PACKAGES := kmod-ath9k wpad-basic
-B43_PACKAGES := kmod-b43 wpad-basic
-BRCMWL_PACKAGES := kmod-brcm-wl nas wlc
-RT28_PACKAGES := kmod-rt2800-pci wpad-basic
-RT61_PACKAGES := kmod-rt61-pci wpad-basic
-USB1_PACKAGES := kmod-usb-ohci kmod-usb-ledtrig-usbport
-USB2_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
-
-include bcm63xx.mk
-
-$(eval $(call BuildImage))