brcm47xx: b44: This updates the phylib patches to the version send upstream

This uses a fixed phy instead of a dummy one.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39166

1 files changed, 32 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/patches-3.10/207-b44-do-not-set-PHY-address-to-30-for-every-ext-PHY.patch b/target/linux/brcm47xx/patches-3.10/207-b44-do-not-set-PHY-address-to-30-for-every-ext-PHY.patch
new file mode 100644
index 0000000000..d4eda982ee
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.10/207-b44-do-not-set-PHY-address-to-30-for-every-ext-PHY.patch
@@ -0,0 +1,32 @@
+From 656a7c2b1210deddf76444ecc76e058c0404ce80 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 20 Dec 2013 02:16:12 +0100
+Subject: [PATCH 207/208] b44: do not set PHY address to 30 for every ext PHY
+
+b44_phy_reset() will fail for an external PHY and only work with the
+internal PHY, this was an old workaround when the detection of an
+external switch based on the PHY address failed and it is not needed
+any more.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/broadcom/b44.c |    7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -2413,8 +2413,11 @@ static int b44_init_one(struct ssb_devic
+ 	b44_chip_reset(bp, B44_CHIP_RESET_FULL);
+ 
+ 	/* do a phy reset to test if there is an active phy */
+-	if (b44_phy_reset(bp) < 0)
+-		bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
++	err = b44_phy_reset(bp);
++	if (err < 0) {
++		dev_err(sdev->dev, "phy reset failed\n");
++		goto err_out_unregister_netdev;
++	}
+ 
+ 	if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
+ 		err = b44_register_phy_one(bp);