brcm2708: add support for 3.10 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37218

17 files changed, 91057 insertions, 0 deletions

diff --git a/target/linux/brcm2708/config-3.10 b/target/linux/brcm2708/config-3.10
new file mode 100644
index 0000000000..6439d34ad8
--- /dev/null
+++ b/target/linux/brcm2708/config-3.10
@@ -0,0 +1,250 @@
+# CONFIG_AIO is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_BCM2708=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_CPU_SUSPEND=y
+# CONFIG_ARM_ERRATA_326103 is not set
+# CONFIG_ARM_ERRATA_364296 is not set
+CONFIG_ARM_ERRATA_411920=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_NR_BANKS=8
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_AVERAGE=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BCM2708_DMAER=y
+CONFIG_BCM2708_GPIO=y
+# CONFIG_BCM2708_NOL2CACHE is not set
+CONFIG_BCM2708_VCHIQ=y
+CONFIG_BCM2708_VCMEM=y
+CONFIG_BCM2708_WDT=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_BRCM_CHAR_DRIVERS=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CPU_V6=y
+CONFIG_CRC16=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEVTMPFS=y
+CONFIG_DNOTIFY=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_ELF_CORE=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FREEZER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ACL=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_PL061 is not set
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_HW_CONSOLE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INPUT=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_IOSCHED_CFQ=y
+CONFIG_JBD2=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_XZ is not set
+CONFIG_KTIME_SCALAR=y
+# CONFIG_LCD_AMS369FG06 is not set
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_MACH_BCM2708=y
+CONFIG_MAC_PARTITION=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_MFD_T7L66XB is not set
+CONFIG_MMC=y
+# CONFIG_MMC_BCM2708 is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_BCM2708=y
+CONFIG_MMC_SDHCI_BCM2708_DMA=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MTD is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_MACH_MEMORY_H=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NO_HZ=y
+CONFIG_OABI_COMPAT=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_RAW_DRIVER=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_PROC_FS is not set
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_STAGING is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_TEXTSEARCH is not set
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_UID16 is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_COMMON=y
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DWCOTG=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_UAS=y
+CONFIG_USB_USBNET=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFP=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm2708/patches-3.10/001-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-3.10/001-Add-dwc_otg-driver.patch
new file mode 100644
index 0000000000..154ebaa474
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/001-Add-dwc_otg-driver.patch
@@ -0,0 +1,57362 @@
+diff -urN linux-3.10/drivers/usb/core/generic.c linux-rpi-3.10.y/drivers/usb/core/generic.c
+--- linux-3.10/drivers/usb/core/generic.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/core/generic.c	2013-07-06 15:25:50.000000000 +0100
+@@ -152,6 +152,7 @@
+ 		dev_warn(&udev->dev,
+ 			"no configuration chosen from %d choice%s\n",
+ 			num_configs, plural(num_configs));
++		dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA);
+ 	}
+ 	return i;
+ }
+diff -urN linux-3.10/drivers/usb/core/message.c linux-rpi-3.10.y/drivers/usb/core/message.c
+--- linux-3.10/drivers/usb/core/message.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/core/message.c	2013-07-06 15:25:50.000000000 +0100
+@@ -1875,6 +1875,85 @@
+ 	if (cp->string == NULL &&
+ 			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
+ 		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
++/* Uncomment this define to enable the HS Electrical Test support */
++#define DWC_HS_ELECT_TST 1
++#ifdef DWC_HS_ELECT_TST
++		/* Here we implement the HS Electrical Test support. The
++		 * tester uses a vendor ID of 0x1A0A to indicate we should
++		 * run a special test sequence. The product ID tells us
++		 * which sequence to run. We invoke the test sequence by
++		 * sending a non-standard SetFeature command to our root
++		 * hub port. Our dwc_otg_hcd_hub_control() routine will
++		 * recognize the command and perform the desired test
++		 * sequence.
++		 */
++		if (dev->descriptor.idVendor == 0x1A0A) {
++			/* HSOTG Electrical Test */
++			dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n");
++
++			if (dev->bus && dev->bus->root_hub) {
++				struct usb_device *hdev = dev->bus->root_hub;
++				dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct);
++
++				switch (dev->descriptor.idProduct) {
++				case 0x0101:	/* TEST_SE0_NAK */
++					dev_warn(&dev->dev, "TEST_SE0_NAK\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ);
++					break;
++
++				case 0x0102:	/* TEST_J */
++					dev_warn(&dev->dev, "TEST_J\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ);
++					break;
++
++				case 0x0103:	/* TEST_K */
++					dev_warn(&dev->dev, "TEST_K\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ);
++					break;
++
++				case 0x0104:	/* TEST_PACKET */
++					dev_warn(&dev->dev, "TEST_PACKET\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ);
++					break;
++
++				case 0x0105:	/* TEST_FORCE_ENABLE */
++					dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ);
++					break;
++
++				case 0x0106:	/* HS_HOST_PORT_SUSPEND_RESUME */
++					dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ);
++					break;
++
++				case 0x0107:	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++					dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ);
++					break;
++
++				case 0x0108:	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++					dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ);
++				}
++			}
++		}
++#endif /* DWC_HS_ELECT_TST */
+ 
+ 	/* Now that the interfaces are installed, re-enable LPM. */
+ 	usb_unlocked_enable_lpm(dev);
+diff -urN linux-3.10/drivers/usb/core/otg_whitelist.h linux-rpi-3.10.y/drivers/usb/core/otg_whitelist.h
+--- linux-3.10/drivers/usb/core/otg_whitelist.h	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/core/otg_whitelist.h	2013-07-06 15:25:50.000000000 +0100
+@@ -19,33 +19,82 @@
+ static struct usb_device_id whitelist_table [] = {
+ 
+ /* hubs are optional in OTG, but very handy ... */
++#define CERT_WITHOUT_HUBS
++#if defined(CERT_WITHOUT_HUBS)
++{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/
++#else
+ { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
+ { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },
++{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), },
++#endif
+ 
+ #ifdef	CONFIG_USB_PRINTER		/* ignoring nonstatic linkage! */
+ /* FIXME actually, printers are NOT supposed to use device classes;
+  * they're supposed to use interface classes...
+  */
+-{ USB_DEVICE_INFO(7, 1, 1) },
+-{ USB_DEVICE_INFO(7, 1, 2) },
+-{ USB_DEVICE_INFO(7, 1, 3) },
++//{ USB_DEVICE_INFO(7, 1, 1) },
++//{ USB_DEVICE_INFO(7, 1, 2) },
++//{ USB_DEVICE_INFO(7, 1, 3) },
+ #endif
+ 
+ #ifdef	CONFIG_USB_NET_CDCETHER
+ /* Linux-USB CDC Ethernet gadget */
+-{ USB_DEVICE(0x0525, 0xa4a1), },
++//{ USB_DEVICE(0x0525, 0xa4a1), },
+ /* Linux-USB CDC Ethernet + RNDIS gadget */
+-{ USB_DEVICE(0x0525, 0xa4a2), },
++//{ USB_DEVICE(0x0525, 0xa4a2), },
+ #endif
+ 
+ #if	defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE)
+ /* gadget zero, for testing */
+-{ USB_DEVICE(0x0525, 0xa4a0), },
++//{ USB_DEVICE(0x0525, 0xa4a0), },
+ #endif
++   
++/* OPT Tester */
++{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */
++{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */
++{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */
++{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */
++{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */
++{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME  */
++{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */
++{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */
++
++/* Sony cameras */        
++{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), },
++   
++/* Memory Devices */
++//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */
++//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */
++//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */
++//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD  */
++{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/
++//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */
++
++/* HP Printers */
++//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */
++//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */
++
++/* Speakers */
++//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */
++//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */
+ 
+ { }	/* Terminating entry */
+ };
+ 
++static inline void report_errors(struct usb_device *dev)
++{
++	/* OTG MESSAGE: report errors here, customize to match your product */
++	dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n",
++		 le16_to_cpu(dev->descriptor.idVendor),
++		 le16_to_cpu(dev->descriptor.idProduct));
++        if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){
++                dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n");
++        } else {        
++                dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n");
++        }
++}
++
++
+ static int is_targeted(struct usb_device *dev)
+ {
+ 	struct usb_device_id	*id = whitelist_table;
+@@ -55,58 +104,83 @@
+ 		return 1;
+ 
+ 	/* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
+-	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
+-	     le16_to_cpu(dev->descriptor.idProduct) == 0xbadd))
+-		return 0;
++	if (dev->descriptor.idVendor == 0x1a0a && 
++            dev->descriptor.idProduct == 0xbadd) {
++                return 0;
++	} else if (!enable_whitelist) {
++		return 1;
++        } else {
+ 
+-	/* NOTE: can't use usb_match_id() since interface caches
+-	 * aren't set up yet. this is cut/paste from that code.
+-	 */
+-	for (id = whitelist_table; id->match_flags; id++) {
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+-		    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
+-		    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
+-			continue;
+-
+-		/* No need to test id->bcdDevice_lo != 0, since 0 is never
+-		   greater than any unsigned number. */
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
+-		    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
+-		    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
+-		    (id->bDeviceClass != dev->descriptor.bDeviceClass))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
+-		    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
+-		    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
+-			continue;
++#ifdef DEBUG
++                dev_dbg(&dev->dev, "device V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n",
++                        dev->descriptor.idVendor,
++                        dev->descriptor.idProduct,
++                        dev->descriptor.bDeviceClass,
++                        dev->descriptor.bDeviceSubClass,
++                        dev->descriptor.bDeviceProtocol);
++#endif
+ 
+ 		return 1;
++		/* NOTE: can't use usb_match_id() since interface caches
++		 * aren't set up yet. this is cut/paste from that code.
++		 */
++		for (id = whitelist_table; id->match_flags; id++) {
++#ifdef DEBUG
++			dev_dbg(&dev->dev, 
++				"ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n",
++				id->idVendor,
++				id->idProduct,
++				id->bDeviceClass,
++				id->bDeviceSubClass,
++				id->bDeviceProtocol);
++#endif			      
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
++			    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
++			    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
++				continue;
++
++			/* No need to test id->bcdDevice_lo != 0, since 0 is never
++			   greater than any unsigned number. */
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
++			    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
++			    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
++			    (id->bDeviceClass != dev->descriptor.bDeviceClass))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
++			    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
++			    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
++				continue;
++
++			return 1;
++		}
+ 	}
+ 
+ 	/* add other match criteria here ... */
+ 
+-
+-	/* OTG MESSAGE: report errors here, customize to match your product */
+-	dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
+-		le16_to_cpu(dev->descriptor.idVendor),
+-		le16_to_cpu(dev->descriptor.idProduct));
+ #ifdef	CONFIG_USB_OTG_WHITELIST
++	report_errors(dev);
+ 	return 0;
+ #else
+-	return 1;
++	if (enable_whitelist) {
++		report_errors(dev);
++		return 0;
++	} else {
++		return 1;
++	}
+ #endif
+ }
+ 
+diff -urN linux-3.10/drivers/usb/gadget/file_storage.c linux-rpi-3.10.y/drivers/usb/gadget/file_storage.c
+--- linux-3.10/drivers/usb/gadget/file_storage.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/gadget/file_storage.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,3676 @@
++/*
++ * file_storage.c -- File-backed USB Storage Gadget, for USB development
++ *
++ * Copyright (C) 2003-2008 Alan Stern
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++/*
++ * The File-backed Storage Gadget acts as a USB Mass Storage device,
++ * appearing to the host as a disk drive or as a CD-ROM drive.  In addition
++ * to providing an example of a genuinely useful gadget driver for a USB
++ * device, it also illustrates a technique of double-buffering for increased
++ * throughput.  Last but not least, it gives an easy way to probe the
++ * behavior of the Mass Storage drivers in a USB host.
++ *
++ * Backing storage is provided by a regular file or a block device, specified
++ * by the "file" module parameter.  Access can be limited to read-only by
++ * setting the optional "ro" module parameter.  (For CD-ROM emulation,
++ * access is always read-only.)  The gadget will indicate that it has
++ * removable media if the optional "removable" module parameter is set.
++ *
++ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI),
++ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected
++ * by the optional "transport" module parameter.  It also supports the
++ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
++ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
++ * the optional "protocol" module parameter.  In addition, the default
++ * Vendor ID, Product ID, release number and serial number can be overridden.
++ *
++ * There is support for multiple logical units (LUNs), each of which has
++ * its own backing file.  The number of LUNs can be set using the optional
++ * "luns" module parameter (anywhere from 1 to 8), and the corresponding
++ * files are specified using comma-separated lists for "file" and "ro".
++ * The default number of LUNs is taken from the number of "file" elements;
++ * it is 1 if "file" is not given.  If "removable" is not set then a backing
++ * file must be specified for each LUN.  If it is set, then an unspecified
++ * or empty backing filename means the LUN's medium is not loaded.  Ideally
++ * each LUN would be settable independently as a disk drive or a CD-ROM
++ * drive, but currently all LUNs have to be the same type.  The CD-ROM
++ * emulation includes a single data track and no audio tracks; hence there
++ * need be only one backing file per LUN.
++ *
++ * Requirements are modest; only a bulk-in and a bulk-out endpoint are
++ * needed (an interrupt-out endpoint is also needed for CBI).  The memory
++ * requirement amounts to two 16K buffers, size configurable by a parameter.
++ * Support is included for both full-speed and high-speed operation.
++ *
++ * Note that the driver is slightly non-portable in that it assumes a
++ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
++ * interrupt-in endpoints.  With most device controllers this isn't an
++ * issue, but there may be some with hardware restrictions that prevent
++ * a buffer from being used by more than one endpoint.
++ *
++ * Module options:
++ *
++ *	file=filename[,filename...]
++ *				Required if "removable" is not set, names of
++ *					the files or block devices used for
++ *					backing storage
++ *	serial=HHHH...		Required serial number (string of hex chars)
++ *	ro=b[,b...]		Default false, booleans for read-only access
++ *	removable		Default false, boolean for removable media
++ *	luns=N			Default N = number of filenames, number of
++ *					LUNs to support
++ *	nofua=b[,b...]		Default false, booleans for ignore FUA flag
++ *					in SCSI WRITE(10,12) commands
++ *	stall			Default determined according to the type of
++ *					USB device controller (usually true),
++ *					boolean to permit the driver to halt
++ *					bulk endpoints
++ *	cdrom			Default false, boolean for whether to emulate
++ *					a CD-ROM drive
++ *	transport=XXX		Default BBB, transport name (CB, CBI, or BBB)
++ *	protocol=YYY		Default SCSI, protocol name (RBC, 8020 or
++ *					ATAPI, QIC, UFI, 8070, or SCSI;
++ *					also 1 - 6)
++ *	vendor=0xVVVV		Default 0x0525 (NetChip), USB Vendor ID
++ *	product=0xPPPP		Default 0xa4a5 (FSG), USB Product ID
++ *	release=0xRRRR		Override the USB release number (bcdDevice)
++ *	buflen=N		Default N=16384, buffer size used (will be
++ *					rounded down to a multiple of
++ *					PAGE_CACHE_SIZE)
++ *
++ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro",
++ * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
++ * default values are used for everything else.
++ *
++ * The pathnames of the backing files and the ro settings are available in
++ * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
++ * the gadget's sysfs directory.  If the "removable" option is set, writing to
++ * these files will simulate ejecting/loading the medium (writing an empty
++ * line means eject) and adjusting a write-enable tab.  Changes to the ro
++ * setting are not allowed when the medium is loaded or if CD-ROM emulation
++ * is being used.
++ *
++ * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
++ * The driver's SCSI command interface was based on the "Information
++ * technology - Small Computer System Interface - 2" document from
++ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
++ * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.  The single exception
++ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
++ * "Universal Serial Bus Mass Storage Class UFI Command Specification"
++ * document, Revision 1.0, December 14, 1998, available at
++ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
++ */
++
++
++/*
++ *				Driver Design
++ *
++ * The FSG driver is fairly straightforward.  There is a main kernel
++ * thread that handles most of the work.  Interrupt routines field
++ * callbacks from the controller driver: bulk- and interrupt-request
++ * completion notifications, endpoint-0 events, and disconnect events.
++ * Completion events are passed to the main thread by wakeup calls.  Many
++ * ep0 requests are handled at interrupt time, but SetInterface,
++ * SetConfiguration, and device reset requests are forwarded to the
++ * thread in the form of "exceptions" using SIGUSR1 signals (since they
++ * should interrupt any ongoing file I/O operations).
++ *
++ * The thread's main routine implements the standard command/data/status
++ * parts of a SCSI interaction.  It and its subroutines are full of tests
++ * for pending signals/exceptions -- all this polling is necessary since
++ * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
++ * indication that the driver really wants to be running in userspace.)
++ * An important point is that so long as the thread is alive it keeps an
++ * open reference to the backing file.  This will prevent unmounting
++ * the backing file's underlying filesystem and could cause problems
++ * during system shutdown, for example.  To prevent such problems, the
++ * thread catches INT, TERM, and KILL signals and converts them into
++ * an EXIT exception.
++ *
++ * In normal operation the main thread is started during the gadget's
++ * fsg_bind() callback and stopped during fsg_unbind().  But it can also
++ * exit when it receives a signal, and there's no point leaving the
++ * gadget running when the thread is dead.  So just before the thread
++ * exits, it deregisters the gadget driver.  This makes things a little
++ * tricky: The driver is deregistered at two places, and the exiting
++ * thread can indirectly call fsg_unbind() which in turn can tell the
++ * thread to exit.  The first problem is resolved through the use of the
++ * REGISTERED atomic bitflag; the driver will only be deregistered once.
++ * The second problem is resolved by having fsg_unbind() check
++ * fsg->state; it won't try to stop the thread if the state is already
++ * FSG_STATE_TERMINATED.
++ *
++ * To provide maximum throughput, the driver uses a circular pipeline of
++ * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
++ * arbitrarily long; in practice the benefits don't justify having more
++ * than 2 stages (i.e., double buffering).  But it helps to think of the
++ * pipeline as being a long one.  Each buffer head contains a bulk-in and
++ * a bulk-out request pointer (since the buffer can be used for both
++ * output and input -- directions always are given from the host's
++ * point of view) as well as a pointer to the buffer and various state
++ * variables.
++ *
++ * Use of the pipeline follows a simple protocol.  There is a variable
++ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
++ * At any time that buffer head may still be in use from an earlier
++ * request, so each buffer head has a state variable indicating whether
++ * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
++ * buffer head to be EMPTY, filling the buffer either by file I/O or by
++ * USB I/O (during which the buffer head is BUSY), and marking the buffer
++ * head FULL when the I/O is complete.  Then the buffer will be emptied
++ * (again possibly by USB I/O, during which it is marked BUSY) and
++ * finally marked EMPTY again (possibly by a completion routine).
++ *
++ * A module parameter tells the driver to avoid stalling the bulk
++ * endpoints wherever the transport specification allows.  This is
++ * necessary for some UDCs like the SuperH, which cannot reliably clear a
++ * halt on a bulk endpoint.  However, under certain circumstances the
++ * Bulk-only specification requires a stall.  In such cases the driver
++ * will halt the endpoint and set a flag indicating that it should clear
++ * the halt in software during the next device reset.  Hopefully this
++ * will permit everything to work correctly.  Furthermore, although the
++ * specification allows the bulk-out endpoint to halt when the host sends
++ * too much data, implementing this would cause an unavoidable race.
++ * The driver will always use the "no-stall" approach for OUT transfers.
++ *
++ * One subtle point concerns sending status-stage responses for ep0
++ * requests.  Some of these requests, such as device reset, can involve
++ * interrupting an ongoing file I/O operation, which might take an
++ * arbitrarily long time.  During that delay the host might give up on
++ * the original ep0 request and issue a new one.  When that happens the
++ * driver should not notify the host about completion of the original
++ * request, as the host will no longer be waiting for it.  So the driver
++ * assigns to each ep0 request a unique tag, and it keeps track of the
++ * tag value of the request associated with a long-running exception
++ * (device-reset, interface-change, or configuration-change).  When the
++ * exception handler is finished, the status-stage response is submitted
++ * only if the current ep0 request tag is equal to the exception request
++ * tag.  Thus only the most recently received ep0 request will get a
++ * status-stage response.
++ *
++ * Warning: This driver source file is too long.  It ought to be split up
++ * into a header file plus about 3 separate .c files, to handle the details
++ * of the Gadget, USB Mass Storage, and SCSI protocols.
++ */
++
++
++/* #define VERBOSE_DEBUG */
++/* #define DUMP_MSGS */
++
++
++#include <linux/blkdev.h>
++#include <linux/completion.h>
++#include <linux/dcache.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/fcntl.h>
++#include <linux/file.h>
++#include <linux/fs.h>
++#include <linux/kref.h>
++#include <linux/kthread.h>
++#include <linux/limits.h>
++#include <linux/module.h>
++#include <linux/rwsem.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/string.h>
++#include <linux/freezer.h>
++#include <linux/utsname.h>
++
++#include <linux/usb/ch9.h>
++#include <linux/usb/gadget.h>
++
++#include "gadget_chips.h"
++
++
++
++/*
++ * Kbuild is not very cooperative with respect to linking separately
++ * compiled library objects into one module.  So for now we won't use
++ * separate compilation ... ensuring init/exit sections work to shrink
++ * the runtime footprint, and giving us at least some parts of what
++ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
++ */
++#include "usbstring.c"
++#include "config.c"
++#include "epautoconf.c"
++
++/*-------------------------------------------------------------------------*/
++
++#define DRIVER_DESC		"File-backed Storage Gadget"
++#define DRIVER_NAME		"g_file_storage"
++#define DRIVER_VERSION		"1 September 2010"
++
++static       char fsg_string_manufacturer[64];
++static const char fsg_string_product[] = DRIVER_DESC;
++static const char fsg_string_config[] = "Self-powered";
++static const char fsg_string_interface[] = "Mass Storage";
++
++
++#include "storage_common.c"
++
++
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_AUTHOR("Alan Stern");
++MODULE_LICENSE("Dual BSD/GPL");
++
++/*
++ * This driver assumes self-powered hardware and has no way for users to
++ * trigger remote wakeup.  It uses autoconfiguration to select endpoints
++ * and endpoint addresses.
++ */
++
++
++/*-------------------------------------------------------------------------*/
++
++
++/* Encapsulate the module parameter settings */
++
++static struct {
++	char		*file[FSG_MAX_LUNS];
++	char		*serial;
++	bool		ro[FSG_MAX_LUNS];
++	bool		nofua[FSG_MAX_LUNS];
++	unsigned int	num_filenames;
++	unsigned int	num_ros;
++	unsigned int	num_nofuas;
++	unsigned int	nluns;
++
++	bool		removable;
++	bool		can_stall;
++	bool		cdrom;
++
++	char		*transport_parm;
++	char		*protocol_parm;
++	unsigned short	vendor;
++	unsigned short	product;
++	unsigned short	release;
++	unsigned int	buflen;
++
++	int		transport_type;
++	char		*transport_name;
++	int		protocol_type;
++	char		*protocol_name;
++
++} mod_data = {					// Default values
++	.transport_parm		= "BBB",
++	.protocol_parm		= "SCSI",
++	.removable		= 0,
++	.can_stall		= 1,
++	.cdrom			= 0,
++	.vendor			= FSG_VENDOR_ID,
++	.product		= FSG_PRODUCT_ID,
++	.release		= 0xffff,	// Use controller chip type
++	.buflen			= 16384,
++	};
++
++
++module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
++		S_IRUGO);
++MODULE_PARM_DESC(file, "names of backing files or devices");
++
++module_param_named(serial, mod_data.serial, charp, S_IRUGO);
++MODULE_PARM_DESC(serial, "USB serial number");
++
++module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
++MODULE_PARM_DESC(ro, "true to force read-only");
++
++module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
++		S_IRUGO);
++MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
++
++module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
++MODULE_PARM_DESC(luns, "number of LUNs");
++
++module_param_named(removable, mod_data.removable, bool, S_IRUGO);
++MODULE_PARM_DESC(removable, "true to simulate removable media");
++
++module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
++MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
++
++module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
++MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
++
++/* In the non-TEST version, only the module parameters listed above
++ * are available. */
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++
++module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO);
++MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)");
++
++module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO);
++MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, "
++		"8070, or SCSI)");
++
++module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO);
++MODULE_PARM_DESC(vendor, "USB Vendor ID");
++
++module_param_named(product, mod_data.product, ushort, S_IRUGO);
++MODULE_PARM_DESC(product, "USB Product ID");
++
++module_param_named(release, mod_data.release, ushort, S_IRUGO);
++MODULE_PARM_DESC(release, "USB release number");
++
++module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
++MODULE_PARM_DESC(buflen, "I/O buffer size");
++
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++/*
++ * These definitions will permit the compiler to avoid generating code for
++ * parts of the driver that aren't used in the non-TEST version.  Even gcc
++ * can recognize when a test of a constant expression yields a dead code
++ * path.
++ */
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++
++#define transport_is_bbb()	(mod_data.transport_type == USB_PR_BULK)
++#define transport_is_cbi()	(mod_data.transport_type == USB_PR_CBI)
++#define protocol_is_scsi()	(mod_data.protocol_type == USB_SC_SCSI)
++
++#else
++
++#define transport_is_bbb()	1
++#define transport_is_cbi()	0
++#define protocol_is_scsi()	1
++
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++/*-------------------------------------------------------------------------*/
++
++
++struct fsg_dev {
++	/* lock protects: state, all the req_busy's, and cbbuf_cmnd */
++	spinlock_t		lock;
++	struct usb_gadget	*gadget;
++
++	/* filesem protects: backing files in use */
++	struct rw_semaphore	filesem;
++
++	/* reference counting: wait until all LUNs are released */
++	struct kref		ref;
++
++	struct usb_ep		*ep0;		// Handy copy of gadget->ep0
++	struct usb_request	*ep0req;	// For control responses
++	unsigned int		ep0_req_tag;
++	const char		*ep0req_name;
++
++	struct usb_request	*intreq;	// For interrupt responses
++	int			intreq_busy;
++	struct fsg_buffhd	*intr_buffhd;
++
++	unsigned int		bulk_out_maxpacket;
++	enum fsg_state		state;		// For exception handling
++	unsigned int		exception_req_tag;
++
++	u8			config, new_config;
++
++	unsigned int		running : 1;
++	unsigned int		bulk_in_enabled : 1;
++	unsigned int		bulk_out_enabled : 1;
++	unsigned int		intr_in_enabled : 1;
++	unsigned int		phase_error : 1;
++	unsigned int		short_packet_received : 1;
++	unsigned int		bad_lun_okay : 1;
++
++	unsigned long		atomic_bitflags;
++#define REGISTERED		0
++#define IGNORE_BULK_OUT		1
++#define SUSPENDED		2
++
++	struct usb_ep		*bulk_in;
++	struct usb_ep		*bulk_out;
++	struct usb_ep		*intr_in;
++
++	struct fsg_buffhd	*next_buffhd_to_fill;
++	struct fsg_buffhd	*next_buffhd_to_drain;
++
++	int			thread_wakeup_needed;
++	struct completion	thread_notifier;
++	struct task_struct	*thread_task;
++
++	int			cmnd_size;
++	u8			cmnd[MAX_COMMAND_SIZE];
++	enum data_direction	data_dir;
++	u32			data_size;
++	u32			data_size_from_cmnd;
++	u32			tag;
++	unsigned int		lun;
++	u32			residue;
++	u32			usb_amount_left;
++
++	/* The CB protocol offers no way for a host to know when a command
++	 * has completed.  As a result the next command may arrive early,
++	 * and we will still have to handle it.  For that reason we need
++	 * a buffer to store new commands when using CB (or CBI, which
++	 * does not oblige a host to wait for command completion either). */
++	int			cbbuf_cmnd_size;
++	u8			cbbuf_cmnd[MAX_COMMAND_SIZE];
++
++	unsigned int		nluns;
++	struct fsg_lun		*luns;
++	struct fsg_lun		*curlun;
++	/* Must be the last entry */
++	struct fsg_buffhd	buffhds[];
++};
++
++typedef void (*fsg_routine_t)(struct fsg_dev *);
++
++static int exception_in_progress(struct fsg_dev *fsg)
++{
++	return (fsg->state > FSG_STATE_IDLE);
++}
++
++/* Make bulk-out requests be divisible by the maxpacket size */
++static void set_bulk_out_req_length(struct fsg_dev *fsg,
++		struct fsg_buffhd *bh, unsigned int length)
++{
++	unsigned int	rem;
++
++	bh->bulk_out_intended_length = length;
++	rem = length % fsg->bulk_out_maxpacket;
++	if (rem > 0)
++		length += fsg->bulk_out_maxpacket - rem;
++	bh->outreq->length = length;
++}
++
++static struct fsg_dev			*the_fsg;
++static struct usb_gadget_driver		fsg_driver;
++
++
++/*-------------------------------------------------------------------------*/
++
++static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
++{
++	const char	*name;
++
++	if (ep == fsg->bulk_in)
++		name = "bulk-in";
++	else if (ep == fsg->bulk_out)
++		name = "bulk-out";
++	else
++		name = ep->name;
++	DBG(fsg, "%s set halt\n", name);
++	return usb_ep_set_halt(ep);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * DESCRIPTORS ... most are static, but strings and (full) configuration
++ * descriptors are built on demand.  Also the (static) config and interface
++ * descriptors are adjusted during fsg_bind().
++ */
++
++/* There is only one configuration. */
++#define	CONFIG_VALUE		1
++
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++
++	.bcdUSB =		cpu_to_le16(0x0200),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++
++	/* The next three values can be overridden by module parameters */
++	.idVendor =		cpu_to_le16(FSG_VENDOR_ID),
++	.idProduct =		cpu_to_le16(FSG_PRODUCT_ID),
++	.bcdDevice =		cpu_to_le16(0xffff),
++
++	.iManufacturer =	FSG_STRING_MANUFACTURER,
++	.iProduct =		FSG_STRING_PRODUCT,
++	.iSerialNumber =	FSG_STRING_SERIAL,
++	.bNumConfigurations =	1,
++};
++
++static struct usb_config_descriptor
++config_desc = {
++	.bLength =		sizeof config_desc,
++	.bDescriptorType =	USB_DT_CONFIG,
++
++	/* wTotalLength computed by usb_gadget_config_buf() */
++	.bNumInterfaces =	1,
++	.bConfigurationValue =	CONFIG_VALUE,
++	.iConfiguration =	FSG_STRING_CONFIG,
++	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
++	.bMaxPower =		CONFIG_USB_GADGET_VBUS_DRAW / 2,
++};
++
++
++static struct usb_qualifier_descriptor
++dev_qualifier = {
++	.bLength =		sizeof dev_qualifier,
++	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
++
++	.bcdUSB =		cpu_to_le16(0x0200),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++
++	.bNumConfigurations =	1,
++};
++
++static int populate_bos(struct fsg_dev *fsg, u8 *buf)
++{
++	memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
++	buf += USB_DT_BOS_SIZE;
++
++	memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
++	buf += USB_DT_USB_EXT_CAP_SIZE;
++
++	memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
++
++	return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
++		+ USB_DT_USB_EXT_CAP_SIZE;
++}
++
++/*
++ * Config descriptors must agree with the code that sets configurations
++ * and with code managing interfaces and their altsettings.  They must
++ * also handle different speeds and other-speed requests.
++ */
++static int populate_config_buf(struct usb_gadget *gadget,
++		u8 *buf, u8 type, unsigned index)
++{
++	enum usb_device_speed			speed = gadget->speed;
++	int					len;
++	const struct usb_descriptor_header	**function;
++
++	if (index > 0)
++		return -EINVAL;
++
++	if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
++		speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
++	function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH
++		? (const struct usb_descriptor_header **)fsg_hs_function
++		: (const struct usb_descriptor_header **)fsg_fs_function;
++
++	/* for now, don't advertise srp-only devices */
++	if (!gadget_is_otg(gadget))
++		function++;
++
++	len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
++	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
++	return len;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* These routines may be called in process context or in_irq */
++
++/* Caller must hold fsg->lock */
++static void wakeup_thread(struct fsg_dev *fsg)
++{
++	/* Tell the main thread that something has happened */
++	fsg->thread_wakeup_needed = 1;
++	if (fsg->thread_task)
++		wake_up_process(fsg->thread_task);
++}
++
++
++static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
++{
++	unsigned long		flags;
++
++	/* Do nothing if a higher-priority exception is already in progress.
++	 * If a lower-or-equal priority exception is in progress, preempt it
++	 * and notify the main thread by sending it a signal. */
++	spin_lock_irqsave(&fsg->lock, flags);
++	if (fsg->state <= new_state) {
++		fsg->exception_req_tag = fsg->ep0_req_tag;
++		fsg->state = new_state;
++		if (fsg->thread_task)
++			send_sig_info(SIGUSR1, SEND_SIG_FORCED,
++					fsg->thread_task);
++	}
++	spin_unlock_irqrestore(&fsg->lock, flags);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* The disconnect callback and ep0 routines.  These always run in_irq,
++ * except that ep0_queue() is called in the main thread to acknowledge
++ * completion of various requests: set config, set interface, and
++ * Bulk-only device reset. */
++
++static void fsg_disconnect(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++
++	DBG(fsg, "disconnect or port reset\n");
++	raise_exception(fsg, FSG_STATE_DISCONNECT);
++}
++
++
++static int ep0_queue(struct fsg_dev *fsg)
++{
++	int	rc;
++
++	rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
++	if (rc != 0 && rc != -ESHUTDOWN) {
++
++		/* We can't do much more than wait for a reset */
++		WARNING(fsg, "error in submission: %s --> %d\n",
++				fsg->ep0->name, rc);
++	}
++	return rc;
++}
++
++static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++
++	if (req->actual > 0)
++		dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
++	if (req->status || req->actual != req->length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual, req->length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	if (req->status == 0 && req->context)
++		((fsg_routine_t) (req->context))(fsg);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Bulk and interrupt endpoint completion handlers.
++ * These always run in_irq. */
++
++static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++	struct fsg_buffhd	*bh = req->context;
++
++	if (req->status || req->actual != req->length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual, req->length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	/* Hold the lock while we update the request and buffer states */
++	smp_wmb();
++	spin_lock(&fsg->lock);
++	bh->inreq_busy = 0;
++	bh->state = BUF_STATE_EMPTY;
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++	struct fsg_buffhd	*bh = req->context;
++
++	dump_msg(fsg, "bulk-out", req->buf, req->actual);
++	if (req->status || req->actual != bh->bulk_out_intended_length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual,
++				bh->bulk_out_intended_length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	/* Hold the lock while we update the request and buffer states */
++	smp_wmb();
++	spin_lock(&fsg->lock);
++	bh->outreq_busy = 0;
++	bh->state = BUF_STATE_FULL;
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++	struct fsg_buffhd	*bh = req->context;
++
++	if (req->status || req->actual != req->length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual, req->length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	/* Hold the lock while we update the request and buffer states */
++	smp_wmb();
++	spin_lock(&fsg->lock);
++	fsg->intreq_busy = 0;
++	bh->state = BUF_STATE_EMPTY;
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++#else
++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
++{}
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Ep0 class-specific handlers.  These always run in_irq. */
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct usb_request	*req = fsg->ep0req;
++	static u8		cbi_reset_cmnd[6] = {
++			SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff};
++
++	/* Error in command transfer? */
++	if (req->status || req->length != req->actual ||
++			req->actual < 6 || req->actual > MAX_COMMAND_SIZE) {
++
++		/* Not all controllers allow a protocol stall after
++		 * receiving control-out data, but we'll try anyway. */
++		fsg_set_halt(fsg, fsg->ep0);
++		return;			// Wait for reset
++	}
++
++	/* Is it the special reset command? */
++	if (req->actual >= sizeof cbi_reset_cmnd &&
++			memcmp(req->buf, cbi_reset_cmnd,
++				sizeof cbi_reset_cmnd) == 0) {
++
++		/* Raise an exception to stop the current operation
++		 * and reinitialize our state. */
++		DBG(fsg, "cbi reset request\n");
++		raise_exception(fsg, FSG_STATE_RESET);
++		return;
++	}
++
++	VDBG(fsg, "CB[I] accept device-specific command\n");
++	spin_lock(&fsg->lock);
++
++	/* Save the command for later */
++	if (fsg->cbbuf_cmnd_size)
++		WARNING(fsg, "CB[I] overwriting previous command\n");
++	fsg->cbbuf_cmnd_size = req->actual;
++	memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
++
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++#else
++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{}
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++static int class_setup_req(struct fsg_dev *fsg,
++		const struct usb_ctrlrequest *ctrl)
++{
++	struct usb_request	*req = fsg->ep0req;
++	int			value = -EOPNOTSUPP;
++	u16			w_index = le16_to_cpu(ctrl->wIndex);
++	u16                     w_value = le16_to_cpu(ctrl->wValue);
++	u16			w_length = le16_to_cpu(ctrl->wLength);
++
++	if (!fsg->config)
++		return value;
++
++	/* Handle Bulk-only class-specific requests */
++	if (transport_is_bbb()) {
++		switch (ctrl->bRequest) {
++
++		case US_BULK_RESET_REQUEST:
++			if (ctrl->bRequestType != (USB_DIR_OUT |
++					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
++				break;
++			if (w_index != 0 || w_value != 0 || w_length != 0) {
++				value = -EDOM;
++				break;
++			}
++
++			/* Raise an exception to stop the current operation
++			 * and reinitialize our state. */
++			DBG(fsg, "bulk reset request\n");
++			raise_exception(fsg, FSG_STATE_RESET);
++			value = DELAYED_STATUS;
++			break;
++
++		case US_BULK_GET_MAX_LUN:
++			if (ctrl->bRequestType != (USB_DIR_IN |
++					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
++				break;
++			if (w_index != 0 || w_value != 0 || w_length != 1) {
++				value = -EDOM;
++				break;
++			}
++			VDBG(fsg, "get max LUN\n");
++			*(u8 *) req->buf = fsg->nluns - 1;
++			value = 1;
++			break;
++		}
++	}
++
++	/* Handle CBI class-specific requests */
++	else {
++		switch (ctrl->bRequest) {
++
++		case USB_CBI_ADSC_REQUEST:
++			if (ctrl->bRequestType != (USB_DIR_OUT |
++					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
++				break;
++			if (w_index != 0 || w_value != 0) {
++				value = -EDOM;
++				break;
++			}
++			if (w_length > MAX_COMMAND_SIZE) {
++				value = -EOVERFLOW;
++				break;
++			}
++			value = w_length;
++			fsg->ep0req->context = received_cbi_adsc;
++			break;
++		}
++	}
++
++	if (value == -EOPNOTSUPP)
++		VDBG(fsg,
++			"unknown class-specific control req "
++			"%02x.%02x v%04x i%04x l%u\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			le16_to_cpu(ctrl->wValue), w_index, w_length);
++	return value;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Ep0 standard request handlers.  These always run in_irq. */
++
++static int standard_setup_req(struct fsg_dev *fsg,
++		const struct usb_ctrlrequest *ctrl)
++{
++	struct usb_request	*req = fsg->ep0req;
++	int			value = -EOPNOTSUPP;
++	u16			w_index = le16_to_cpu(ctrl->wIndex);
++	u16			w_value = le16_to_cpu(ctrl->wValue);
++
++	/* Usually this just stores reply data in the pre-allocated ep0 buffer,
++	 * but config change events will also reconfigure hardware. */
++	switch (ctrl->bRequest) {
++
++	case USB_REQ_GET_DESCRIPTOR:
++		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
++				USB_RECIP_DEVICE))
++			break;
++		switch (w_value >> 8) {
++
++		case USB_DT_DEVICE:
++			VDBG(fsg, "get device descriptor\n");
++			device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
++			value = sizeof device_desc;
++			memcpy(req->buf, &device_desc, value);
++			break;
++		case USB_DT_DEVICE_QUALIFIER:
++			VDBG(fsg, "get device qualifier\n");
++			if (!gadget_is_dualspeed(fsg->gadget) ||
++					fsg->gadget->speed == USB_SPEED_SUPER)
++				break;
++			/*
++			 * Assume ep0 uses the same maxpacket value for both
++			 * speeds
++			 */
++			dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
++			value = sizeof dev_qualifier;
++			memcpy(req->buf, &dev_qualifier, value);
++			break;
++
++		case USB_DT_OTHER_SPEED_CONFIG:
++			VDBG(fsg, "get other-speed config descriptor\n");
++			if (!gadget_is_dualspeed(fsg->gadget) ||
++					fsg->gadget->speed == USB_SPEED_SUPER)
++				break;
++			goto get_config;
++		case USB_DT_CONFIG:
++			VDBG(fsg, "get configuration descriptor\n");
++get_config:
++			value = populate_config_buf(fsg->gadget,
++					req->buf,
++					w_value >> 8,
++					w_value & 0xff);
++			break;
++
++		case USB_DT_STRING:
++			VDBG(fsg, "get string descriptor\n");
++
++			/* wIndex == language code */
++			value = usb_gadget_get_string(&fsg_stringtab,
++					w_value & 0xff, req->buf);
++			break;
++
++		case USB_DT_BOS:
++			VDBG(fsg, "get bos descriptor\n");
++
++			if (gadget_is_superspeed(fsg->gadget))
++				value = populate_bos(fsg, req->buf);
++			break;
++		}
++
++		break;
++
++	/* One config, two speeds */
++	case USB_REQ_SET_CONFIGURATION:
++		if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
++				USB_RECIP_DEVICE))
++			break;
++		VDBG(fsg, "set configuration\n");
++		if (w_value == CONFIG_VALUE || w_value == 0) {
++			fsg->new_config = w_value;
++
++			/* Raise an exception to wipe out previous transaction
++			 * state (queued bufs, etc) and set the new config. */
++			raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
++			value = DELAYED_STATUS;
++		}
++		break;
++	case USB_REQ_GET_CONFIGURATION:
++		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
++				USB_RECIP_DEVICE))
++			break;
++		VDBG(fsg, "get configuration\n");
++		*(u8 *) req->buf = fsg->config;
++		value = 1;
++		break;
++
++	case USB_REQ_SET_INTERFACE:
++		if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
++				USB_RECIP_INTERFACE))
++			break;
++		if (fsg->config && w_index == 0) {
++
++			/* Raise an exception to wipe out previous transaction
++			 * state (queued bufs, etc) and install the new
++			 * interface altsetting. */
++			raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
++			value = DELAYED_STATUS;
++		}
++		break;
++	case USB_REQ_GET_INTERFACE:
++		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
++				USB_RECIP_INTERFACE))
++			break;
++		if (!fsg->config)
++			break;
++		if (w_index != 0) {
++			value = -EDOM;
++			break;
++		}
++		VDBG(fsg, "get interface\n");
++		*(u8 *) req->buf = 0;
++		value = 1;
++		break;
++
++	default:
++		VDBG(fsg,
++			"unknown control req %02x.%02x v%04x i%04x l%u\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			w_value, w_index, le16_to_cpu(ctrl->wLength));
++	}
++
++	return value;
++}
++
++
++static int fsg_setup(struct usb_gadget *gadget,
++		const struct usb_ctrlrequest *ctrl)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++	int			rc;
++	int			w_length = le16_to_cpu(ctrl->wLength);
++
++	++fsg->ep0_req_tag;		// Record arrival of a new request
++	fsg->ep0req->context = NULL;
++	fsg->ep0req->length = 0;
++	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
++
++	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
++		rc = class_setup_req(fsg, ctrl);
++	else
++		rc = standard_setup_req(fsg, ctrl);
++
++	/* Respond with data/status or defer until later? */
++	if (rc >= 0 && rc != DELAYED_STATUS) {
++		rc = min(rc, w_length);
++		fsg->ep0req->length = rc;
++		fsg->ep0req->zero = rc < w_length;
++		fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
++				"ep0-in" : "ep0-out");
++		rc = ep0_queue(fsg);
++	}
++
++	/* Device either stalls (rc < 0) or reports success */
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* All the following routines run in process context */
++
++
++/* Use this for bulk or interrupt transfers, not ep0 */
++static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
++		struct usb_request *req, int *pbusy,
++		enum fsg_buffer_state *state)
++{
++	int	rc;
++
++	if (ep == fsg->bulk_in)
++		dump_msg(fsg, "bulk-in", req->buf, req->length);
++	else if (ep == fsg->intr_in)
++		dump_msg(fsg, "intr-in", req->buf, req->length);
++
++	spin_lock_irq(&fsg->lock);
++	*pbusy = 1;
++	*state = BUF_STATE_BUSY;
++	spin_unlock_irq(&fsg->lock);
++	rc = usb_ep_queue(ep, req, GFP_KERNEL);
++	if (rc != 0) {
++		*pbusy = 0;
++		*state = BUF_STATE_EMPTY;
++
++		/* We can't do much more than wait for a reset */
++
++		/* Note: currently the net2280 driver fails zero-length
++		 * submissions if DMA is enabled. */
++		if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
++						req->length == 0))
++			WARNING(fsg, "error in submission: %s --> %d\n",
++					ep->name, rc);
++	}
++}
++
++
++static int sleep_thread(struct fsg_dev *fsg)
++{
++	int	rc = 0;
++
++	/* Wait until a signal arrives or we are woken up */
++	for (;;) {
++		try_to_freeze();
++		set_current_state(TASK_INTERRUPTIBLE);
++		if (signal_pending(current)) {
++			rc = -EINTR;
++			break;
++		}
++		if (fsg->thread_wakeup_needed)
++			break;
++		schedule();
++	}
++	__set_current_state(TASK_RUNNING);
++	fsg->thread_wakeup_needed = 0;
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_read(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	u32			lba;
++	struct fsg_buffhd	*bh;
++	int			rc;
++	u32			amount_left;
++	loff_t			file_offset, file_offset_tmp;
++	unsigned int		amount;
++	ssize_t			nread;
++
++	/* Get the starting Logical Block Address and check that it's
++	 * not too big */
++	if (fsg->cmnd[0] == READ_6)
++		lba = get_unaligned_be24(&fsg->cmnd[1]);
++	else {
++		lba = get_unaligned_be32(&fsg->cmnd[2]);
++
++		/* We allow DPO (Disable Page Out = don't save data in the
++		 * cache) and FUA (Force Unit Access = don't read from the
++		 * cache), but we don't implement them. */
++		if ((fsg->cmnd[1] & ~0x18) != 0) {
++			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++			return -EINVAL;
++		}
++	}
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++	file_offset = ((loff_t) lba) << curlun->blkbits;
++
++	/* Carry out the file reads */
++	amount_left = fsg->data_size_from_cmnd;
++	if (unlikely(amount_left == 0))
++		return -EIO;		// No default reply
++
++	for (;;) {
++
++		/* Figure out how much we need to read:
++		 * Try to read the remaining amount.
++		 * But don't read more than the buffer size.
++		 * And don't try to read past the end of the file.
++		 */
++		amount = min((unsigned int) amount_left, mod_data.buflen);
++		amount = min((loff_t) amount,
++				curlun->file_length - file_offset);
++
++		/* Wait for the next buffer to become available */
++		bh = fsg->next_buffhd_to_fill;
++		while (bh->state != BUF_STATE_EMPTY) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++
++		/* If we were asked to read past the end of file,
++		 * end with an empty buffer. */
++		if (amount == 0) {
++			curlun->sense_data =
++					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			bh->inreq->length = 0;
++			bh->state = BUF_STATE_FULL;
++			break;
++		}
++
++		/* Perform the read */
++		file_offset_tmp = file_offset;
++		nread = vfs_read(curlun->filp,
++				(char __user *) bh->buf,
++				amount, &file_offset_tmp);
++		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
++				(unsigned long long) file_offset,
++				(int) nread);
++		if (signal_pending(current))
++			return -EINTR;
++
++		if (nread < 0) {
++			LDBG(curlun, "error in file read: %d\n",
++					(int) nread);
++			nread = 0;
++		} else if (nread < amount) {
++			LDBG(curlun, "partial file read: %d/%u\n",
++					(int) nread, amount);
++			nread = round_down(nread, curlun->blksize);
++		}
++		file_offset  += nread;
++		amount_left  -= nread;
++		fsg->residue -= nread;
++
++		/* Except at the end of the transfer, nread will be
++		 * equal to the buffer size, which is divisible by the
++		 * bulk-in maxpacket size.
++		 */
++		bh->inreq->length = nread;
++		bh->state = BUF_STATE_FULL;
++
++		/* If an error occurred, report it and its position */
++		if (nread < amount) {
++			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			break;
++		}
++
++		if (amount_left == 0)
++			break;		// No more left to read
++
++		/* Send this buffer and go read some more */
++		bh->inreq->zero = 0;
++		start_transfer(fsg, fsg->bulk_in, bh->inreq,
++				&bh->inreq_busy, &bh->state);
++		fsg->next_buffhd_to_fill = bh->next;
++	}
++
++	return -EIO;		// No default reply
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_write(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	u32			lba;
++	struct fsg_buffhd	*bh;
++	int			get_some_more;
++	u32			amount_left_to_req, amount_left_to_write;
++	loff_t			usb_offset, file_offset, file_offset_tmp;
++	unsigned int		amount;
++	ssize_t			nwritten;
++	int			rc;
++
++	if (curlun->ro) {
++		curlun->sense_data = SS_WRITE_PROTECTED;
++		return -EINVAL;
++	}
++	spin_lock(&curlun->filp->f_lock);
++	curlun->filp->f_flags &= ~O_SYNC;	// Default is not to wait
++	spin_unlock(&curlun->filp->f_lock);
++
++	/* Get the starting Logical Block Address and check that it's
++	 * not too big */
++	if (fsg->cmnd[0] == WRITE_6)
++		lba = get_unaligned_be24(&fsg->cmnd[1]);
++	else {
++		lba = get_unaligned_be32(&fsg->cmnd[2]);
++
++		/* We allow DPO (Disable Page Out = don't save data in the
++		 * cache) and FUA (Force Unit Access = write directly to the
++		 * medium).  We don't implement DPO; we implement FUA by
++		 * performing synchronous output. */
++		if ((fsg->cmnd[1] & ~0x18) != 0) {
++			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++			return -EINVAL;
++		}
++		/* FUA */
++		if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
++			spin_lock(&curlun->filp->f_lock);
++			curlun->filp->f_flags |= O_DSYNC;
++			spin_unlock(&curlun->filp->f_lock);
++		}
++	}
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++
++	/* Carry out the file writes */
++	get_some_more = 1;
++	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
++	amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
++
++	while (amount_left_to_write > 0) {
++
++		/* Queue a request for more data from the host */
++		bh = fsg->next_buffhd_to_fill;
++		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
++
++			/* Figure out how much we want to get:
++			 * Try to get the remaining amount,
++			 * but not more than the buffer size.
++			 */
++			amount = min(amount_left_to_req, mod_data.buflen);
++
++			/* Beyond the end of the backing file? */
++			if (usb_offset >= curlun->file_length) {
++				get_some_more = 0;
++				curlun->sense_data =
++					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++				curlun->sense_data_info = usb_offset >> curlun->blkbits;
++				curlun->info_valid = 1;
++				continue;
++			}
++
++			/* Get the next buffer */
++			usb_offset += amount;
++			fsg->usb_amount_left -= amount;
++			amount_left_to_req -= amount;
++			if (amount_left_to_req == 0)
++				get_some_more = 0;
++
++			/* Except at the end of the transfer, amount will be
++			 * equal to the buffer size, which is divisible by
++			 * the bulk-out maxpacket size.
++			 */
++			set_bulk_out_req_length(fsg, bh, amount);
++			start_transfer(fsg, fsg->bulk_out, bh->outreq,
++					&bh->outreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++			continue;
++		}
++
++		/* Write the received data to the backing file */
++		bh = fsg->next_buffhd_to_drain;
++		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
++			break;			// We stopped early
++		if (bh->state == BUF_STATE_FULL) {
++			smp_rmb();
++			fsg->next_buffhd_to_drain = bh->next;
++			bh->state = BUF_STATE_EMPTY;
++
++			/* Did something go wrong with the transfer? */
++			if (bh->outreq->status != 0) {
++				curlun->sense_data = SS_COMMUNICATION_FAILURE;
++				curlun->sense_data_info = file_offset >> curlun->blkbits;
++				curlun->info_valid = 1;
++				break;
++			}
++
++			amount = bh->outreq->actual;
++			if (curlun->file_length - file_offset < amount) {
++				LERROR(curlun,
++	"write %u @ %llu beyond end %llu\n",
++	amount, (unsigned long long) file_offset,
++	(unsigned long long) curlun->file_length);
++				amount = curlun->file_length - file_offset;
++			}
++
++			/* Don't accept excess data.  The spec doesn't say
++			 * what to do in this case.  We'll ignore the error.
++			 */
++			amount = min(amount, bh->bulk_out_intended_length);
++
++			/* Don't write a partial block */
++			amount = round_down(amount, curlun->blksize);
++			if (amount == 0)
++				goto empty_write;
++
++			/* Perform the write */
++			file_offset_tmp = file_offset;
++			nwritten = vfs_write(curlun->filp,
++					(char __user *) bh->buf,
++					amount, &file_offset_tmp);
++			VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
++					(unsigned long long) file_offset,
++					(int) nwritten);
++			if (signal_pending(current))
++				return -EINTR;		// Interrupted!
++
++			if (nwritten < 0) {
++				LDBG(curlun, "error in file write: %d\n",
++						(int) nwritten);
++				nwritten = 0;
++			} else if (nwritten < amount) {
++				LDBG(curlun, "partial file write: %d/%u\n",
++						(int) nwritten, amount);
++				nwritten = round_down(nwritten, curlun->blksize);
++			}
++			file_offset += nwritten;
++			amount_left_to_write -= nwritten;
++			fsg->residue -= nwritten;
++
++			/* If an error occurred, report it and its position */
++			if (nwritten < amount) {
++				curlun->sense_data = SS_WRITE_ERROR;
++				curlun->sense_data_info = file_offset >> curlun->blkbits;
++				curlun->info_valid = 1;
++				break;
++			}
++
++ empty_write:
++			/* Did the host decide to stop early? */
++			if (bh->outreq->actual < bh->bulk_out_intended_length) {
++				fsg->short_packet_received = 1;
++				break;
++			}
++			continue;
++		}
++
++		/* Wait for something to happen */
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++
++	return -EIO;		// No default reply
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_synchronize_cache(struct fsg_dev *fsg)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		rc;
++
++	/* We ignore the requested LBA and write out all file's
++	 * dirty data buffers. */
++	rc = fsg_lun_fsync_sub(curlun);
++	if (rc)
++		curlun->sense_data = SS_WRITE_ERROR;
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static void invalidate_sub(struct fsg_lun *curlun)
++{
++	struct file	*filp = curlun->filp;
++	struct inode	*inode = filp->f_path.dentry->d_inode;
++	unsigned long	rc;
++
++	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
++	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
++}
++
++static int do_verify(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	u32			lba;
++	u32			verification_length;
++	struct fsg_buffhd	*bh = fsg->next_buffhd_to_fill;
++	loff_t			file_offset, file_offset_tmp;
++	u32			amount_left;
++	unsigned int		amount;
++	ssize_t			nread;
++
++	/* Get the starting Logical Block Address and check that it's
++	 * not too big */
++	lba = get_unaligned_be32(&fsg->cmnd[2]);
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++
++	/* We allow DPO (Disable Page Out = don't save data in the
++	 * cache) but we don't implement it. */
++	if ((fsg->cmnd[1] & ~0x10) != 0) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	verification_length = get_unaligned_be16(&fsg->cmnd[7]);
++	if (unlikely(verification_length == 0))
++		return -EIO;		// No default reply
++
++	/* Prepare to carry out the file verify */
++	amount_left = verification_length << curlun->blkbits;
++	file_offset = ((loff_t) lba) << curlun->blkbits;
++
++	/* Write out all the dirty buffers before invalidating them */
++	fsg_lun_fsync_sub(curlun);
++	if (signal_pending(current))
++		return -EINTR;
++
++	invalidate_sub(curlun);
++	if (signal_pending(current))
++		return -EINTR;
++
++	/* Just try to read the requested blocks */
++	while (amount_left > 0) {
++
++		/* Figure out how much we need to read:
++		 * Try to read the remaining amount, but not more than
++		 * the buffer size.
++		 * And don't try to read past the end of the file.
++		 */
++		amount = min((unsigned int) amount_left, mod_data.buflen);
++		amount = min((loff_t) amount,
++				curlun->file_length - file_offset);
++		if (amount == 0) {
++			curlun->sense_data =
++					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			break;
++		}
++
++		/* Perform the read */
++		file_offset_tmp = file_offset;
++		nread = vfs_read(curlun->filp,
++				(char __user *) bh->buf,
++				amount, &file_offset_tmp);
++		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
++				(unsigned long long) file_offset,
++				(int) nread);
++		if (signal_pending(current))
++			return -EINTR;
++
++		if (nread < 0) {
++			LDBG(curlun, "error in file verify: %d\n",
++					(int) nread);
++			nread = 0;
++		} else if (nread < amount) {
++			LDBG(curlun, "partial file verify: %d/%u\n",
++					(int) nread, amount);
++			nread = round_down(nread, curlun->blksize);
++		}
++		if (nread == 0) {
++			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			break;
++		}
++		file_offset += nread;
++		amount_left -= nread;
++	}
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	u8	*buf = (u8 *) bh->buf;
++
++	static char vendor_id[] = "Linux   ";
++	static char product_disk_id[] = "File-Stor Gadget";
++	static char product_cdrom_id[] = "File-CD Gadget  ";
++
++	if (!fsg->curlun) {		// Unsupported LUNs are okay
++		fsg->bad_lun_okay = 1;
++		memset(buf, 0, 36);
++		buf[0] = 0x7f;		// Unsupported, no device-type
++		buf[4] = 31;		// Additional length
++		return 36;
++	}
++
++	memset(buf, 0, 8);
++	buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK);
++	if (mod_data.removable)
++		buf[1] = 0x80;
++	buf[2] = 2;		// ANSI SCSI level 2
++	buf[3] = 2;		// SCSI-2 INQUIRY data format
++	buf[4] = 31;		// Additional length
++				// No special options
++	sprintf(buf + 8, "%-8s%-16s%04x", vendor_id,
++			(mod_data.cdrom ? product_cdrom_id :
++				product_disk_id),
++			mod_data.release);
++	return 36;
++}
++
++
++static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	u8		*buf = (u8 *) bh->buf;
++	u32		sd, sdinfo;
++	int		valid;
++
++	/*
++	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
++	 *
++	 * If a REQUEST SENSE command is received from an initiator
++	 * with a pending unit attention condition (before the target
++	 * generates the contingent allegiance condition), then the
++	 * target shall either:
++	 *   a) report any pending sense data and preserve the unit
++	 *	attention condition on the logical unit, or,
++	 *   b) report the unit attention condition, may discard any
++	 *	pending sense data, and clear the unit attention
++	 *	condition on the logical unit for that initiator.
++	 *
++	 * FSG normally uses option a); enable this code to use option b).
++	 */
++#if 0
++	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
++		curlun->sense_data = curlun->unit_attention_data;
++		curlun->unit_attention_data = SS_NO_SENSE;
++	}
++#endif
++
++	if (!curlun) {		// Unsupported LUNs are okay
++		fsg->bad_lun_okay = 1;
++		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
++		sdinfo = 0;
++		valid = 0;
++	} else {
++		sd = curlun->sense_data;
++		sdinfo = curlun->sense_data_info;
++		valid = curlun->info_valid << 7;
++		curlun->sense_data = SS_NO_SENSE;
++		curlun->sense_data_info = 0;
++		curlun->info_valid = 0;
++	}
++
++	memset(buf, 0, 18);
++	buf[0] = valid | 0x70;			// Valid, current error
++	buf[2] = SK(sd);
++	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
++	buf[7] = 18 - 8;			// Additional sense length
++	buf[12] = ASC(sd);
++	buf[13] = ASCQ(sd);
++	return 18;
++}
++
++
++static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
++	int		pmi = fsg->cmnd[8];
++	u8		*buf = (u8 *) bh->buf;
++
++	/* Check the PMI and LBA fields */
++	if (pmi > 1 || (pmi == 0 && lba != 0)) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
++						/* Max logical block */
++	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
++	return 8;
++}
++
++
++static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		msf = fsg->cmnd[1] & 0x02;
++	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
++	u8		*buf = (u8 *) bh->buf;
++
++	if ((fsg->cmnd[1] & ~0x02) != 0) {		/* Mask away MSF */
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++
++	memset(buf, 0, 8);
++	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
++	store_cdrom_address(&buf[4], msf, lba);
++	return 8;
++}
++
++
++static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		msf = fsg->cmnd[1] & 0x02;
++	int		start_track = fsg->cmnd[6];
++	u8		*buf = (u8 *) bh->buf;
++
++	if ((fsg->cmnd[1] & ~0x02) != 0 ||		/* Mask away MSF */
++			start_track > 1) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	memset(buf, 0, 20);
++	buf[1] = (20-2);		/* TOC data length */
++	buf[2] = 1;			/* First track number */
++	buf[3] = 1;			/* Last track number */
++	buf[5] = 0x16;			/* Data track, copying allowed */
++	buf[6] = 0x01;			/* Only track is number 1 */
++	store_cdrom_address(&buf[8], msf, 0);
++
++	buf[13] = 0x16;			/* Lead-out track is data */
++	buf[14] = 0xAA;			/* Lead-out track number */
++	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
++	return 20;
++}
++
++
++static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		mscmnd = fsg->cmnd[0];
++	u8		*buf = (u8 *) bh->buf;
++	u8		*buf0 = buf;
++	int		pc, page_code;
++	int		changeable_values, all_pages;
++	int		valid_page = 0;
++	int		len, limit;
++
++	if ((fsg->cmnd[1] & ~0x08) != 0) {		// Mask away DBD
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++	pc = fsg->cmnd[2] >> 6;
++	page_code = fsg->cmnd[2] & 0x3f;
++	if (pc == 3) {
++		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
++		return -EINVAL;
++	}
++	changeable_values = (pc == 1);
++	all_pages = (page_code == 0x3f);
++
++	/* Write the mode parameter header.  Fixed values are: default
++	 * medium type, no cache control (DPOFUA), and no block descriptors.
++	 * The only variable value is the WriteProtect bit.  We will fill in
++	 * the mode data length later. */
++	memset(buf, 0, 8);
++	if (mscmnd == MODE_SENSE) {
++		buf[2] = (curlun->ro ? 0x80 : 0x00);		// WP, DPOFUA
++		buf += 4;
++		limit = 255;
++	} else {			// MODE_SENSE_10
++		buf[3] = (curlun->ro ? 0x80 : 0x00);		// WP, DPOFUA
++		buf += 8;
++		limit = 65535;		// Should really be mod_data.buflen
++	}
++
++	/* No block descriptors */
++
++	/* The mode pages, in numerical order.  The only page we support
++	 * is the Caching page. */
++	if (page_code == 0x08 || all_pages) {
++		valid_page = 1;
++		buf[0] = 0x08;		// Page code
++		buf[1] = 10;		// Page length
++		memset(buf+2, 0, 10);	// None of the fields are changeable
++
++		if (!changeable_values) {
++			buf[2] = 0x04;	// Write cache enable,
++					// Read cache not disabled
++					// No cache retention priorities
++			put_unaligned_be16(0xffff, &buf[4]);
++					/* Don't disable prefetch */
++					/* Minimum prefetch = 0 */
++			put_unaligned_be16(0xffff, &buf[8]);
++					/* Maximum prefetch */
++			put_unaligned_be16(0xffff, &buf[10]);
++					/* Maximum prefetch ceiling */
++		}
++		buf += 12;
++	}
++
++	/* Check that a valid page was requested and the mode data length
++	 * isn't too long. */
++	len = buf - buf0;
++	if (!valid_page || len > limit) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	/*  Store the mode data length */
++	if (mscmnd == MODE_SENSE)
++		buf0[0] = len - 1;
++	else
++		put_unaligned_be16(len - 2, buf0);
++	return len;
++}
++
++
++static int do_start_stop(struct fsg_dev *fsg)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		loej, start;
++
++	if (!mod_data.removable) {
++		curlun->sense_data = SS_INVALID_COMMAND;
++		return -EINVAL;
++	}
++
++	// int immed = fsg->cmnd[1] & 0x01;
++	loej = fsg->cmnd[4] & 0x02;
++	start = fsg->cmnd[4] & 0x01;
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++	if ((fsg->cmnd[1] & ~0x01) != 0 ||		// Mask away Immed
++			(fsg->cmnd[4] & ~0x03) != 0) {	// Mask LoEj, Start
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	if (!start) {
++
++		/* Are we allowed to unload the media? */
++		if (curlun->prevent_medium_removal) {
++			LDBG(curlun, "unload attempt prevented\n");
++			curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
++			return -EINVAL;
++		}
++		if (loej) {		// Simulate an unload/eject
++			up_read(&fsg->filesem);
++			down_write(&fsg->filesem);
++			fsg_lun_close(curlun);
++			up_write(&fsg->filesem);
++			down_read(&fsg->filesem);
++		}
++	} else {
++
++		/* Our emulation doesn't support mounting; the medium is
++		 * available for use as soon as it is loaded. */
++		if (!fsg_lun_is_open(curlun)) {
++			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
++			return -EINVAL;
++		}
++	}
++#endif
++	return 0;
++}
++
++
++static int do_prevent_allow(struct fsg_dev *fsg)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		prevent;
++
++	if (!mod_data.removable) {
++		curlun->sense_data = SS_INVALID_COMMAND;
++		return -EINVAL;
++	}
++
++	prevent = fsg->cmnd[4] & 0x01;
++	if ((fsg->cmnd[4] & ~0x01) != 0) {		// Mask away Prevent
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	if (curlun->prevent_medium_removal && !prevent)
++		fsg_lun_fsync_sub(curlun);
++	curlun->prevent_medium_removal = prevent;
++	return 0;
++}
++
++
++static int do_read_format_capacities(struct fsg_dev *fsg,
++			struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	u8		*buf = (u8 *) bh->buf;
++
++	buf[0] = buf[1] = buf[2] = 0;
++	buf[3] = 8;		// Only the Current/Maximum Capacity Descriptor
++	buf += 4;
++
++	put_unaligned_be32(curlun->num_sectors, &buf[0]);
++						/* Number of blocks */
++	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
++	buf[4] = 0x02;				/* Current capacity */
++	return 12;
++}
++
++
++static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++
++	/* We don't support MODE SELECT */
++	curlun->sense_data = SS_INVALID_COMMAND;
++	return -EINVAL;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
++{
++	int	rc;
++
++	rc = fsg_set_halt(fsg, fsg->bulk_in);
++	if (rc == -EAGAIN)
++		VDBG(fsg, "delayed bulk-in endpoint halt\n");
++	while (rc != 0) {
++		if (rc != -EAGAIN) {
++			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
++			rc = 0;
++			break;
++		}
++
++		/* Wait for a short time and then try again */
++		if (msleep_interruptible(100) != 0)
++			return -EINTR;
++		rc = usb_ep_set_halt(fsg->bulk_in);
++	}
++	return rc;
++}
++
++static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
++{
++	int	rc;
++
++	DBG(fsg, "bulk-in set wedge\n");
++	rc = usb_ep_set_wedge(fsg->bulk_in);
++	if (rc == -EAGAIN)
++		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
++	while (rc != 0) {
++		if (rc != -EAGAIN) {
++			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
++			rc = 0;
++			break;
++		}
++
++		/* Wait for a short time and then try again */
++		if (msleep_interruptible(100) != 0)
++			return -EINTR;
++		rc = usb_ep_set_wedge(fsg->bulk_in);
++	}
++	return rc;
++}
++
++static int throw_away_data(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh;
++	u32			amount;
++	int			rc;
++
++	while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
++			fsg->usb_amount_left > 0) {
++
++		/* Throw away the data in a filled buffer */
++		if (bh->state == BUF_STATE_FULL) {
++			smp_rmb();
++			bh->state = BUF_STATE_EMPTY;
++			fsg->next_buffhd_to_drain = bh->next;
++
++			/* A short packet or an error ends everything */
++			if (bh->outreq->actual < bh->bulk_out_intended_length ||
++					bh->outreq->status != 0) {
++				raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
++				return -EINTR;
++			}
++			continue;
++		}
++
++		/* Try to submit another request if we need one */
++		bh = fsg->next_buffhd_to_fill;
++		if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
++			amount = min(fsg->usb_amount_left,
++					(u32) mod_data.buflen);
++
++			/* Except at the end of the transfer, amount will be
++			 * equal to the buffer size, which is divisible by
++			 * the bulk-out maxpacket size.
++			 */
++			set_bulk_out_req_length(fsg, bh, amount);
++			start_transfer(fsg, fsg->bulk_out, bh->outreq,
++					&bh->outreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++			fsg->usb_amount_left -= amount;
++			continue;
++		}
++
++		/* Otherwise wait for something to happen */
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++	return 0;
++}
++
++
++static int finish_reply(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh = fsg->next_buffhd_to_fill;
++	int			rc = 0;
++
++	switch (fsg->data_dir) {
++	case DATA_DIR_NONE:
++		break;			// Nothing to send
++
++	/* If we don't know whether the host wants to read or write,
++	 * this must be CB or CBI with an unknown command.  We mustn't
++	 * try to send or receive any data.  So stall both bulk pipes
++	 * if we can and wait for a reset. */
++	case DATA_DIR_UNKNOWN:
++		if (mod_data.can_stall) {
++			fsg_set_halt(fsg, fsg->bulk_out);
++			rc = halt_bulk_in_endpoint(fsg);
++		}
++		break;
++
++	/* All but the last buffer of data must have already been sent */
++	case DATA_DIR_TO_HOST:
++		if (fsg->data_size == 0)
++			;		// Nothing to send
++
++		/* If there's no residue, simply send the last buffer */
++		else if (fsg->residue == 0) {
++			bh->inreq->zero = 0;
++			start_transfer(fsg, fsg->bulk_in, bh->inreq,
++					&bh->inreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++		}
++
++		/* There is a residue.  For CB and CBI, simply mark the end
++		 * of the data with a short packet.  However, if we are
++		 * allowed to stall, there was no data at all (residue ==
++		 * data_size), and the command failed (invalid LUN or
++		 * sense data is set), then halt the bulk-in endpoint
++		 * instead. */
++		else if (!transport_is_bbb()) {
++			if (mod_data.can_stall &&
++					fsg->residue == fsg->data_size &&
++	(!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) {
++				bh->state = BUF_STATE_EMPTY;
++				rc = halt_bulk_in_endpoint(fsg);
++			} else {
++				bh->inreq->zero = 1;
++				start_transfer(fsg, fsg->bulk_in, bh->inreq,
++						&bh->inreq_busy, &bh->state);
++				fsg->next_buffhd_to_fill = bh->next;
++			}
++		}
++
++		/*
++		 * For Bulk-only, mark the end of the data with a short
++		 * packet.  If we are allowed to stall, halt the bulk-in
++		 * endpoint.  (Note: This violates the Bulk-Only Transport
++		 * specification, which requires us to pad the data if we
++		 * don't halt the endpoint.  Presumably nobody will mind.)
++		 */
++		else {
++			bh->inreq->zero = 1;
++			start_transfer(fsg, fsg->bulk_in, bh->inreq,
++					&bh->inreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++			if (mod_data.can_stall)
++				rc = halt_bulk_in_endpoint(fsg);
++		}
++		break;
++
++	/* We have processed all we want from the data the host has sent.
++	 * There may still be outstanding bulk-out requests. */
++	case DATA_DIR_FROM_HOST:
++		if (fsg->residue == 0)
++			;		// Nothing to receive
++
++		/* Did the host stop sending unexpectedly early? */
++		else if (fsg->short_packet_received) {
++			raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
++			rc = -EINTR;
++		}
++
++		/* We haven't processed all the incoming data.  Even though
++		 * we may be allowed to stall, doing so would cause a race.
++		 * The controller may already have ACK'ed all the remaining
++		 * bulk-out packets, in which case the host wouldn't see a
++		 * STALL.  Not realizing the endpoint was halted, it wouldn't
++		 * clear the halt -- leading to problems later on. */
++#if 0
++		else if (mod_data.can_stall) {
++			fsg_set_halt(fsg, fsg->bulk_out);
++			raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
++			rc = -EINTR;
++		}
++#endif
++
++		/* We can't stall.  Read in the excess data and throw it
++		 * all away. */
++		else
++			rc = throw_away_data(fsg);
++		break;
++	}
++	return rc;
++}
++
++
++static int send_status(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	struct fsg_buffhd	*bh;
++	int			rc;
++	u8			status = US_BULK_STAT_OK;
++	u32			sd, sdinfo = 0;
++
++	/* Wait for the next buffer to become available */
++	bh = fsg->next_buffhd_to_fill;
++	while (bh->state != BUF_STATE_EMPTY) {
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++
++	if (curlun) {
++		sd = curlun->sense_data;
++		sdinfo = curlun->sense_data_info;
++	} else if (fsg->bad_lun_okay)
++		sd = SS_NO_SENSE;
++	else
++		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
++
++	if (fsg->phase_error) {
++		DBG(fsg, "sending phase-error status\n");
++		status = US_BULK_STAT_PHASE;
++		sd = SS_INVALID_COMMAND;
++	} else if (sd != SS_NO_SENSE) {
++		DBG(fsg, "sending command-failure status\n");
++		status = US_BULK_STAT_FAIL;
++		VDBG(fsg, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
++				"  info x%x\n",
++				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
++	}
++
++	if (transport_is_bbb()) {
++		struct bulk_cs_wrap	*csw = bh->buf;
++
++		/* Store and send the Bulk-only CSW */
++		csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
++		csw->Tag = fsg->tag;
++		csw->Residue = cpu_to_le32(fsg->residue);
++		csw->Status = status;
++
++		bh->inreq->length = US_BULK_CS_WRAP_LEN;
++		bh->inreq->zero = 0;
++		start_transfer(fsg, fsg->bulk_in, bh->inreq,
++				&bh->inreq_busy, &bh->state);
++
++	} else if (mod_data.transport_type == USB_PR_CB) {
++
++		/* Control-Bulk transport has no status phase! */
++		return 0;
++
++	} else {			// USB_PR_CBI
++		struct interrupt_data	*buf = bh->buf;
++
++		/* Store and send the Interrupt data.  UFI sends the ASC
++		 * and ASCQ bytes.  Everything else sends a Type (which
++		 * is always 0) and the status Value. */
++		if (mod_data.protocol_type == USB_SC_UFI) {
++			buf->bType = ASC(sd);
++			buf->bValue = ASCQ(sd);
++		} else {
++			buf->bType = 0;
++			buf->bValue = status;
++		}
++		fsg->intreq->length = CBI_INTERRUPT_DATA_LEN;
++
++		fsg->intr_buffhd = bh;		// Point to the right buffhd
++		fsg->intreq->buf = bh->inreq->buf;
++		fsg->intreq->context = bh;
++		start_transfer(fsg, fsg->intr_in, fsg->intreq,
++				&fsg->intreq_busy, &bh->state);
++	}
++
++	fsg->next_buffhd_to_fill = bh->next;
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Check whether the command is properly formed and whether its data size
++ * and direction agree with the values we already have. */
++static int check_command(struct fsg_dev *fsg, int cmnd_size,
++		enum data_direction data_dir, unsigned int mask,
++		int needs_medium, const char *name)
++{
++	int			i;
++	int			lun = fsg->cmnd[1] >> 5;
++	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
++	char			hdlen[20];
++	struct fsg_lun		*curlun;
++
++	/* Adjust the expected cmnd_size for protocol encapsulation padding.
++	 * Transparent SCSI doesn't pad. */
++	if (protocol_is_scsi())
++		;
++
++	/* There's some disagreement as to whether RBC pads commands or not.
++	 * We'll play it safe and accept either form. */
++	else if (mod_data.protocol_type == USB_SC_RBC) {
++		if (fsg->cmnd_size == 12)
++			cmnd_size = 12;
++
++	/* All the other protocols pad to 12 bytes */
++	} else
++		cmnd_size = 12;
++
++	hdlen[0] = 0;
++	if (fsg->data_dir != DATA_DIR_UNKNOWN)
++		sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
++				fsg->data_size);
++	VDBG(fsg, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
++			name, cmnd_size, dirletter[(int) data_dir],
++			fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
++
++	/* We can't reply at all until we know the correct data direction
++	 * and size. */
++	if (fsg->data_size_from_cmnd == 0)
++		data_dir = DATA_DIR_NONE;
++	if (fsg->data_dir == DATA_DIR_UNKNOWN) {	// CB or CBI
++		fsg->data_dir = data_dir;
++		fsg->data_size = fsg->data_size_from_cmnd;
++
++	} else {					// Bulk-only
++		if (fsg->data_size < fsg->data_size_from_cmnd) {
++
++			/* Host data size < Device data size is a phase error.
++			 * Carry out the command, but only transfer as much
++			 * as we are allowed. */
++			fsg->data_size_from_cmnd = fsg->data_size;
++			fsg->phase_error = 1;
++		}
++	}
++	fsg->residue = fsg->usb_amount_left = fsg->data_size;
++
++	/* Conflicting data directions is a phase error */
++	if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
++		fsg->phase_error = 1;
++		return -EINVAL;
++	}
++
++	/* Verify the length of the command itself */
++	if (cmnd_size != fsg->cmnd_size) {
++
++		/* Special case workaround: There are plenty of buggy SCSI
++		 * implementations. Many have issues with cbw->Length
++		 * field passing a wrong command size. For those cases we
++		 * always try to work around the problem by using the length
++		 * sent by the host side provided it is at least as large
++		 * as the correct command length.
++		 * Examples of such cases would be MS-Windows, which issues
++		 * REQUEST SENSE with cbw->Length == 12 where it should
++		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
++		 * REQUEST SENSE with cbw->Length == 10 where it should
++		 * be 6 as well.
++		 */
++		if (cmnd_size <= fsg->cmnd_size) {
++			DBG(fsg, "%s is buggy! Expected length %d "
++					"but we got %d\n", name,
++					cmnd_size, fsg->cmnd_size);
++			cmnd_size = fsg->cmnd_size;
++		} else {
++			fsg->phase_error = 1;
++			return -EINVAL;
++		}
++	}
++
++	/* Check that the LUN values are consistent */
++	if (transport_is_bbb()) {
++		if (fsg->lun != lun)
++			DBG(fsg, "using LUN %d from CBW, "
++					"not LUN %d from CDB\n",
++					fsg->lun, lun);
++	}
++
++	/* Check the LUN */
++	curlun = fsg->curlun;
++	if (curlun) {
++		if (fsg->cmnd[0] != REQUEST_SENSE) {
++			curlun->sense_data = SS_NO_SENSE;
++			curlun->sense_data_info = 0;
++			curlun->info_valid = 0;
++		}
++	} else {
++		fsg->bad_lun_okay = 0;
++
++		/* INQUIRY and REQUEST SENSE commands are explicitly allowed
++		 * to use unsupported LUNs; all others may not. */
++		if (fsg->cmnd[0] != INQUIRY &&
++				fsg->cmnd[0] != REQUEST_SENSE) {
++			DBG(fsg, "unsupported LUN %d\n", fsg->lun);
++			return -EINVAL;
++		}
++	}
++
++	/* If a unit attention condition exists, only INQUIRY and
++	 * REQUEST SENSE commands are allowed; anything else must fail. */
++	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
++			fsg->cmnd[0] != INQUIRY &&
++			fsg->cmnd[0] != REQUEST_SENSE) {
++		curlun->sense_data = curlun->unit_attention_data;
++		curlun->unit_attention_data = SS_NO_SENSE;
++		return -EINVAL;
++	}
++
++	/* Check that only command bytes listed in the mask are non-zero */
++	fsg->cmnd[1] &= 0x1f;			// Mask away the LUN
++	for (i = 1; i < cmnd_size; ++i) {
++		if (fsg->cmnd[i] && !(mask & (1 << i))) {
++			if (curlun)
++				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++			return -EINVAL;
++		}
++	}
++
++	/* If the medium isn't mounted and the command needs to access
++	 * it, return an error. */
++	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
++		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/* wrapper of check_command for data size in blocks handling */
++static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size,
++		enum data_direction data_dir, unsigned int mask,
++		int needs_medium, const char *name)
++{
++	if (fsg->curlun)
++		fsg->data_size_from_cmnd <<= fsg->curlun->blkbits;
++	return check_command(fsg, cmnd_size, data_dir,
++			mask, needs_medium, name);
++}
++
++static int do_scsi_command(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh;
++	int			rc;
++	int			reply = -EINVAL;
++	int			i;
++	static char		unknown[16];
++
++	dump_cdb(fsg);
++
++	/* Wait for the next buffer to become available for data or status */
++	bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
++	while (bh->state != BUF_STATE_EMPTY) {
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++	fsg->phase_error = 0;
++	fsg->short_packet_received = 0;
++
++	down_read(&fsg->filesem);	// We're using the backing file
++	switch (fsg->cmnd[0]) {
++
++	case INQUIRY:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
++				(1<<4), 0,
++				"INQUIRY")) == 0)
++			reply = do_inquiry(fsg, bh);
++		break;
++
++	case MODE_SELECT:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
++				(1<<1) | (1<<4), 0,
++				"MODE SELECT(6)")) == 0)
++			reply = do_mode_select(fsg, bh);
++		break;
++
++	case MODE_SELECT_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
++				(1<<1) | (3<<7), 0,
++				"MODE SELECT(10)")) == 0)
++			reply = do_mode_select(fsg, bh);
++		break;
++
++	case MODE_SENSE:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
++				(1<<1) | (1<<2) | (1<<4), 0,
++				"MODE SENSE(6)")) == 0)
++			reply = do_mode_sense(fsg, bh);
++		break;
++
++	case MODE_SENSE_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(1<<1) | (1<<2) | (3<<7), 0,
++				"MODE SENSE(10)")) == 0)
++			reply = do_mode_sense(fsg, bh);
++		break;
++
++	case ALLOW_MEDIUM_REMOVAL:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
++				(1<<4), 0,
++				"PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
++			reply = do_prevent_allow(fsg);
++		break;
++
++	case READ_6:
++		i = fsg->cmnd[4];
++		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
++		if ((reply = check_command_size_in_blocks(fsg, 6,
++				DATA_DIR_TO_HOST,
++				(7<<1) | (1<<4), 1,
++				"READ(6)")) == 0)
++			reply = do_read(fsg);
++		break;
++
++	case READ_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command_size_in_blocks(fsg, 10,
++				DATA_DIR_TO_HOST,
++				(1<<1) | (0xf<<2) | (3<<7), 1,
++				"READ(10)")) == 0)
++			reply = do_read(fsg);
++		break;
++
++	case READ_12:
++		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
++		if ((reply = check_command_size_in_blocks(fsg, 12,
++				DATA_DIR_TO_HOST,
++				(1<<1) | (0xf<<2) | (0xf<<6), 1,
++				"READ(12)")) == 0)
++			reply = do_read(fsg);
++		break;
++
++	case READ_CAPACITY:
++		fsg->data_size_from_cmnd = 8;
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(0xf<<2) | (1<<8), 1,
++				"READ CAPACITY")) == 0)
++			reply = do_read_capacity(fsg, bh);
++		break;
++
++	case READ_HEADER:
++		if (!mod_data.cdrom)
++			goto unknown_cmnd;
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(3<<7) | (0x1f<<1), 1,
++				"READ HEADER")) == 0)
++			reply = do_read_header(fsg, bh);
++		break;
++
++	case READ_TOC:
++		if (!mod_data.cdrom)
++			goto unknown_cmnd;
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(7<<6) | (1<<1), 1,
++				"READ TOC")) == 0)
++			reply = do_read_toc(fsg, bh);
++		break;
++
++	case READ_FORMAT_CAPACITIES:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(3<<7), 1,
++				"READ FORMAT CAPACITIES")) == 0)
++			reply = do_read_format_capacities(fsg, bh);
++		break;
++
++	case REQUEST_SENSE:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
++				(1<<4), 0,
++				"REQUEST SENSE")) == 0)
++			reply = do_request_sense(fsg, bh);
++		break;
++
++	case START_STOP:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
++				(1<<1) | (1<<4), 0,
++				"START-STOP UNIT")) == 0)
++			reply = do_start_stop(fsg);
++		break;
++
++	case SYNCHRONIZE_CACHE:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
++				(0xf<<2) | (3<<7), 1,
++				"SYNCHRONIZE CACHE")) == 0)
++			reply = do_synchronize_cache(fsg);
++		break;
++
++	case TEST_UNIT_READY:
++		fsg->data_size_from_cmnd = 0;
++		reply = check_command(fsg, 6, DATA_DIR_NONE,
++				0, 1,
++				"TEST UNIT READY");
++		break;
++
++	/* Although optional, this command is used by MS-Windows.  We
++	 * support a minimal version: BytChk must be 0. */
++	case VERIFY:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
++				(1<<1) | (0xf<<2) | (3<<7), 1,
++				"VERIFY")) == 0)
++			reply = do_verify(fsg);
++		break;
++
++	case WRITE_6:
++		i = fsg->cmnd[4];
++		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
++		if ((reply = check_command_size_in_blocks(fsg, 6,
++				DATA_DIR_FROM_HOST,
++				(7<<1) | (1<<4), 1,
++				"WRITE(6)")) == 0)
++			reply = do_write(fsg);
++		break;
++
++	case WRITE_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command_size_in_blocks(fsg, 10,
++				DATA_DIR_FROM_HOST,
++				(1<<1) | (0xf<<2) | (3<<7), 1,
++				"WRITE(10)")) == 0)
++			reply = do_write(fsg);
++		break;
++
++	case WRITE_12:
++		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
++		if ((reply = check_command_size_in_blocks(fsg, 12,
++				DATA_DIR_FROM_HOST,
++				(1<<1) | (0xf<<2) | (0xf<<6), 1,
++				"WRITE(12)")) == 0)
++			reply = do_write(fsg);
++		break;
++
++	/* Some mandatory commands that we recognize but don't implement.
++	 * They don't mean much in this setting.  It's left as an exercise
++	 * for anyone interested to implement RESERVE and RELEASE in terms
++	 * of Posix locks. */
++	case FORMAT_UNIT:
++	case RELEASE:
++	case RESERVE:
++	case SEND_DIAGNOSTIC:
++		// Fall through
++
++	default:
++ unknown_cmnd:
++		fsg->data_size_from_cmnd = 0;
++		sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
++		if ((reply = check_command(fsg, fsg->cmnd_size,
++				DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
++			fsg->curlun->sense_data = SS_INVALID_COMMAND;
++			reply = -EINVAL;
++		}
++		break;
++	}
++	up_read(&fsg->filesem);
++
++	if (reply == -EINTR || signal_pending(current))
++		return -EINTR;
++
++	/* Set up the single reply buffer for finish_reply() */
++	if (reply == -EINVAL)
++		reply = 0;		// Error reply length
++	if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
++		reply = min((u32) reply, fsg->data_size_from_cmnd);
++		bh->inreq->length = reply;
++		bh->state = BUF_STATE_FULL;
++		fsg->residue -= reply;
++	}				// Otherwise it's already set
++
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct usb_request		*req = bh->outreq;
++	struct bulk_cb_wrap	*cbw = req->buf;
++
++	/* Was this a real packet?  Should it be ignored? */
++	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
++		return -EINVAL;
++
++	/* Is the CBW valid? */
++	if (req->actual != US_BULK_CB_WRAP_LEN ||
++			cbw->Signature != cpu_to_le32(
++				US_BULK_CB_SIGN)) {
++		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
++				req->actual,
++				le32_to_cpu(cbw->Signature));
++
++		/* The Bulk-only spec says we MUST stall the IN endpoint
++		 * (6.6.1), so it's unavoidable.  It also says we must
++		 * retain this state until the next reset, but there's
++		 * no way to tell the controller driver it should ignore
++		 * Clear-Feature(HALT) requests.
++		 *
++		 * We aren't required to halt the OUT endpoint; instead
++		 * we can simply accept and discard any data received
++		 * until the next reset. */
++		wedge_bulk_in_endpoint(fsg);
++		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
++		return -EINVAL;
++	}
++
++	/* Is the CBW meaningful? */
++	if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
++			cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
++		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
++				"cmdlen %u\n",
++				cbw->Lun, cbw->Flags, cbw->Length);
++
++		/* We can do anything we want here, so let's stall the
++		 * bulk pipes if we are allowed to. */
++		if (mod_data.can_stall) {
++			fsg_set_halt(fsg, fsg->bulk_out);
++			halt_bulk_in_endpoint(fsg);
++		}
++		return -EINVAL;
++	}
++
++	/* Save the command for later */
++	fsg->cmnd_size = cbw->Length;
++	memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
++	if (cbw->Flags & US_BULK_FLAG_IN)
++		fsg->data_dir = DATA_DIR_TO_HOST;
++	else
++		fsg->data_dir = DATA_DIR_FROM_HOST;
++	fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
++	if (fsg->data_size == 0)
++		fsg->data_dir = DATA_DIR_NONE;
++	fsg->lun = cbw->Lun;
++	fsg->tag = cbw->Tag;
++	return 0;
++}
++
++
++static int get_next_command(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh;
++	int			rc = 0;
++
++	if (transport_is_bbb()) {
++
++		/* Wait for the next buffer to become available */
++		bh = fsg->next_buffhd_to_fill;
++		while (bh->state != BUF_STATE_EMPTY) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++
++		/* Queue a request to read a Bulk-only CBW */
++		set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN);
++		start_transfer(fsg, fsg->bulk_out, bh->outreq,
++				&bh->outreq_busy, &bh->state);
++
++		/* We will drain the buffer in software, which means we
++		 * can reuse it for the next filling.  No need to advance
++		 * next_buffhd_to_fill. */
++
++		/* Wait for the CBW to arrive */
++		while (bh->state != BUF_STATE_FULL) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++		smp_rmb();
++		rc = received_cbw(fsg, bh);
++		bh->state = BUF_STATE_EMPTY;
++
++	} else {		// USB_PR_CB or USB_PR_CBI
++
++		/* Wait for the next command to arrive */
++		while (fsg->cbbuf_cmnd_size == 0) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++
++		/* Is the previous status interrupt request still busy?
++		 * The host is allowed to skip reading the status,
++		 * so we must cancel it. */
++		if (fsg->intreq_busy)
++			usb_ep_dequeue(fsg->intr_in, fsg->intreq);
++
++		/* Copy the command and mark the buffer empty */
++		fsg->data_dir = DATA_DIR_UNKNOWN;
++		spin_lock_irq(&fsg->lock);
++		fsg->cmnd_size = fsg->cbbuf_cmnd_size;
++		memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
++		fsg->cbbuf_cmnd_size = 0;
++		spin_unlock_irq(&fsg->lock);
++
++		/* Use LUN from the command */
++		fsg->lun = fsg->cmnd[1] >> 5;
++	}
++
++	/* Update current lun */
++	if (fsg->lun >= 0 && fsg->lun < fsg->nluns)
++		fsg->curlun = &fsg->luns[fsg->lun];
++	else
++		fsg->curlun = NULL;
++
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
++		const struct usb_endpoint_descriptor *d)
++{
++	int	rc;
++
++	ep->driver_data = fsg;
++	ep->desc = d;
++	rc = usb_ep_enable(ep);
++	if (rc)
++		ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
++	return rc;
++}
++
++static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
++		struct usb_request **preq)
++{
++	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
++	if (*preq)
++		return 0;
++	ERROR(fsg, "can't allocate request for %s\n", ep->name);
++	return -ENOMEM;
++}
++
++/*
++ * Reset interface setting and re-init endpoint state (toggle etc).
++ * Call with altsetting < 0 to disable the interface.  The only other
++ * available altsetting is 0, which enables the interface.
++ */
++static int do_set_interface(struct fsg_dev *fsg, int altsetting)
++{
++	int	rc = 0;
++	int	i;
++	const struct usb_endpoint_descriptor	*d;
++
++	if (fsg->running)
++		DBG(fsg, "reset interface\n");
++
++reset:
++	/* Deallocate the requests */
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		struct fsg_buffhd *bh = &fsg->buffhds[i];
++
++		if (bh->inreq) {
++			usb_ep_free_request(fsg->bulk_in, bh->inreq);
++			bh->inreq = NULL;
++		}
++		if (bh->outreq) {
++			usb_ep_free_request(fsg->bulk_out, bh->outreq);
++			bh->outreq = NULL;
++		}
++	}
++	if (fsg->intreq) {
++		usb_ep_free_request(fsg->intr_in, fsg->intreq);
++		fsg->intreq = NULL;
++	}
++
++	/* Disable the endpoints */
++	if (fsg->bulk_in_enabled) {
++		usb_ep_disable(fsg->bulk_in);
++		fsg->bulk_in_enabled = 0;
++	}
++	if (fsg->bulk_out_enabled) {
++		usb_ep_disable(fsg->bulk_out);
++		fsg->bulk_out_enabled = 0;
++	}
++	if (fsg->intr_in_enabled) {
++		usb_ep_disable(fsg->intr_in);
++		fsg->intr_in_enabled = 0;
++	}
++
++	fsg->running = 0;
++	if (altsetting < 0 || rc != 0)
++		return rc;
++
++	DBG(fsg, "set interface %d\n", altsetting);
++
++	/* Enable the endpoints */
++	d = fsg_ep_desc(fsg->gadget,
++			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
++			&fsg_ss_bulk_in_desc);
++	if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
++		goto reset;
++	fsg->bulk_in_enabled = 1;
++
++	d = fsg_ep_desc(fsg->gadget,
++			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
++			&fsg_ss_bulk_out_desc);
++	if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
++		goto reset;
++	fsg->bulk_out_enabled = 1;
++	fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
++	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
++
++	if (transport_is_cbi()) {
++		d = fsg_ep_desc(fsg->gadget,
++				&fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
++				&fsg_ss_intr_in_desc);
++		if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
++			goto reset;
++		fsg->intr_in_enabled = 1;
++	}
++
++	/* Allocate the requests */
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		struct fsg_buffhd	*bh = &fsg->buffhds[i];
++
++		if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
++			goto reset;
++		if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
++			goto reset;
++		bh->inreq->buf = bh->outreq->buf = bh->buf;
++		bh->inreq->context = bh->outreq->context = bh;
++		bh->inreq->complete = bulk_in_complete;
++		bh->outreq->complete = bulk_out_complete;
++	}
++	if (transport_is_cbi()) {
++		if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0)
++			goto reset;
++		fsg->intreq->complete = intr_in_complete;
++	}
++
++	fsg->running = 1;
++	for (i = 0; i < fsg->nluns; ++i)
++		fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
++	return rc;
++}
++
++
++/*
++ * Change our operational configuration.  This code must agree with the code
++ * that returns config descriptors, and with interface altsetting code.
++ *
++ * It's also responsible for power management interactions.  Some
++ * configurations might not work with our current power sources.
++ * For now we just assume the gadget is always self-powered.
++ */
++static int do_set_config(struct fsg_dev *fsg, u8 new_config)
++{
++	int	rc = 0;
++
++	/* Disable the single interface */
++	if (fsg->config != 0) {
++		DBG(fsg, "reset config\n");
++		fsg->config = 0;
++		rc = do_set_interface(fsg, -1);
++	}
++
++	/* Enable the interface */
++	if (new_config != 0) {
++		fsg->config = new_config;
++		if ((rc = do_set_interface(fsg, 0)) != 0)
++			fsg->config = 0;	// Reset on errors
++		else
++			INFO(fsg, "%s config #%d\n",
++			     usb_speed_string(fsg->gadget->speed),
++			     fsg->config);
++	}
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static void handle_exception(struct fsg_dev *fsg)
++{
++	siginfo_t		info;
++	int			sig;
++	int			i;
++	int			num_active;
++	struct fsg_buffhd	*bh;
++	enum fsg_state		old_state;
++	u8			new_config;
++	struct fsg_lun		*curlun;
++	unsigned int		exception_req_tag;
++	int			rc;
++
++	/* Clear the existing signals.  Anything but SIGUSR1 is converted
++	 * into a high-priority EXIT exception. */
++	for (;;) {
++		sig = dequeue_signal_lock(current, &current->blocked, &info);
++		if (!sig)
++			break;
++		if (sig != SIGUSR1) {
++			if (fsg->state < FSG_STATE_EXIT)
++				DBG(fsg, "Main thread exiting on signal\n");
++			raise_exception(fsg, FSG_STATE_EXIT);
++		}
++	}
++
++	/* Cancel all the pending transfers */
++	if (fsg->intreq_busy)
++		usb_ep_dequeue(fsg->intr_in, fsg->intreq);
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		bh = &fsg->buffhds[i];
++		if (bh->inreq_busy)
++			usb_ep_dequeue(fsg->bulk_in, bh->inreq);
++		if (bh->outreq_busy)
++			usb_ep_dequeue(fsg->bulk_out, bh->outreq);
++	}
++
++	/* Wait until everything is idle */
++	for (;;) {
++		num_active = fsg->intreq_busy;
++		for (i = 0; i < fsg_num_buffers; ++i) {
++			bh = &fsg->buffhds[i];
++			num_active += bh->inreq_busy + bh->outreq_busy;
++		}
++		if (num_active == 0)
++			break;
++		if (sleep_thread(fsg))
++			return;
++	}
++
++	/* Clear out the controller's fifos */
++	if (fsg->bulk_in_enabled)
++		usb_ep_fifo_flush(fsg->bulk_in);
++	if (fsg->bulk_out_enabled)
++		usb_ep_fifo_flush(fsg->bulk_out);
++	if (fsg->intr_in_enabled)
++		usb_ep_fifo_flush(fsg->intr_in);
++
++	/* Reset the I/O buffer states and pointers, the SCSI
++	 * state, and the exception.  Then invoke the handler. */
++	spin_lock_irq(&fsg->lock);
++
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		bh = &fsg->buffhds[i];
++		bh->state = BUF_STATE_EMPTY;
++	}
++	fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
++			&fsg->buffhds[0];
++
++	exception_req_tag = fsg->exception_req_tag;
++	new_config = fsg->new_config;
++	old_state = fsg->state;
++
++	if (old_state == FSG_STATE_ABORT_BULK_OUT)
++		fsg->state = FSG_STATE_STATUS_PHASE;
++	else {
++		for (i = 0; i < fsg->nluns; ++i) {
++			curlun = &fsg->luns[i];
++			curlun->prevent_medium_removal = 0;
++			curlun->sense_data = curlun->unit_attention_data =
++					SS_NO_SENSE;
++			curlun->sense_data_info = 0;
++			curlun->info_valid = 0;
++		}
++		fsg->state = FSG_STATE_IDLE;
++	}
++	spin_unlock_irq(&fsg->lock);
++
++	/* Carry out any extra actions required for the exception */
++	switch (old_state) {
++	default:
++		break;
++
++	case FSG_STATE_ABORT_BULK_OUT:
++		send_status(fsg);
++		spin_lock_irq(&fsg->lock);
++		if (fsg->state == FSG_STATE_STATUS_PHASE)
++			fsg->state = FSG_STATE_IDLE;
++		spin_unlock_irq(&fsg->lock);
++		break;
++
++	case FSG_STATE_RESET:
++		/* In case we were forced against our will to halt a
++		 * bulk endpoint, clear the halt now.  (The SuperH UDC
++		 * requires this.) */
++		if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
++			usb_ep_clear_halt(fsg->bulk_in);
++
++		if (transport_is_bbb()) {
++			if (fsg->ep0_req_tag == exception_req_tag)
++				ep0_queue(fsg);	// Complete the status stage
++
++		} else if (transport_is_cbi())
++			send_status(fsg);	// Status by interrupt pipe
++
++		/* Technically this should go here, but it would only be
++		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
++		 * CONFIG_CHANGE cases. */
++		// for (i = 0; i < fsg->nluns; ++i)
++		//	fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
++		break;
++
++	case FSG_STATE_INTERFACE_CHANGE:
++		rc = do_set_interface(fsg, 0);
++		if (fsg->ep0_req_tag != exception_req_tag)
++			break;
++		if (rc != 0)			// STALL on errors
++			fsg_set_halt(fsg, fsg->ep0);
++		else				// Complete the status stage
++			ep0_queue(fsg);
++		break;
++
++	case FSG_STATE_CONFIG_CHANGE:
++		rc = do_set_config(fsg, new_config);
++		if (fsg->ep0_req_tag != exception_req_tag)
++			break;
++		if (rc != 0)			// STALL on errors
++			fsg_set_halt(fsg, fsg->ep0);
++		else				// Complete the status stage
++			ep0_queue(fsg);
++		break;
++
++	case FSG_STATE_DISCONNECT:
++		for (i = 0; i < fsg->nluns; ++i)
++			fsg_lun_fsync_sub(fsg->luns + i);
++		do_set_config(fsg, 0);		// Unconfigured state
++		break;
++
++	case FSG_STATE_EXIT:
++	case FSG_STATE_TERMINATED:
++		do_set_config(fsg, 0);			// Free resources
++		spin_lock_irq(&fsg->lock);
++		fsg->state = FSG_STATE_TERMINATED;	// Stop the thread
++		spin_unlock_irq(&fsg->lock);
++		break;
++	}
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int fsg_main_thread(void *fsg_)
++{
++	struct fsg_dev		*fsg = fsg_;
++
++	/* Allow the thread to be killed by a signal, but set the signal mask
++	 * to block everything but INT, TERM, KILL, and USR1. */
++	allow_signal(SIGINT);
++	allow_signal(SIGTERM);
++	allow_signal(SIGKILL);
++	allow_signal(SIGUSR1);
++
++	/* Allow the thread to be frozen */
++	set_freezable();
++
++	/* Arrange for userspace references to be interpreted as kernel
++	 * pointers.  That way we can pass a kernel pointer to a routine
++	 * that expects a __user pointer and it will work okay. */
++	set_fs(get_ds());
++
++	/* The main loop */
++	while (fsg->state != FSG_STATE_TERMINATED) {
++		if (exception_in_progress(fsg) || signal_pending(current)) {
++			handle_exception(fsg);
++			continue;
++		}
++
++		if (!fsg->running) {
++			sleep_thread(fsg);
++			continue;
++		}
++
++		if (get_next_command(fsg))
++			continue;
++
++		spin_lock_irq(&fsg->lock);
++		if (!exception_in_progress(fsg))
++			fsg->state = FSG_STATE_DATA_PHASE;
++		spin_unlock_irq(&fsg->lock);
++
++		if (do_scsi_command(fsg) || finish_reply(fsg))
++			continue;
++
++		spin_lock_irq(&fsg->lock);
++		if (!exception_in_progress(fsg))
++			fsg->state = FSG_STATE_STATUS_PHASE;
++		spin_unlock_irq(&fsg->lock);
++
++		if (send_status(fsg))
++			continue;
++
++		spin_lock_irq(&fsg->lock);
++		if (!exception_in_progress(fsg))
++			fsg->state = FSG_STATE_IDLE;
++		spin_unlock_irq(&fsg->lock);
++		}
++
++	spin_lock_irq(&fsg->lock);
++	fsg->thread_task = NULL;
++	spin_unlock_irq(&fsg->lock);
++
++	/* If we are exiting because of a signal, unregister the
++	 * gadget driver. */
++	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
++		usb_gadget_unregister_driver(&fsg_driver);
++
++	/* Let the unbind and cleanup routines know the thread has exited */
++	complete_and_exit(&fsg->thread_notifier, 0);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++
++/* The write permissions and store_xxx pointers are set in fsg_bind() */
++static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
++static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
++static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
++
++
++/*-------------------------------------------------------------------------*/
++
++static void fsg_release(struct kref *ref)
++{
++	struct fsg_dev	*fsg = container_of(ref, struct fsg_dev, ref);
++
++	kfree(fsg->luns);
++	kfree(fsg);
++}
++
++static void lun_release(struct device *dev)
++{
++	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
++	struct fsg_dev		*fsg =
++		container_of(filesem, struct fsg_dev, filesem);
++
++	kref_put(&fsg->ref, fsg_release);
++}
++
++static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++	int			i;
++	struct fsg_lun		*curlun;
++	struct usb_request	*req = fsg->ep0req;
++
++	DBG(fsg, "unbind\n");
++	clear_bit(REGISTERED, &fsg->atomic_bitflags);
++
++	/* If the thread isn't already dead, tell it to exit now */
++	if (fsg->state != FSG_STATE_TERMINATED) {
++		raise_exception(fsg, FSG_STATE_EXIT);
++		wait_for_completion(&fsg->thread_notifier);
++
++		/* The cleanup routine waits for this completion also */
++		complete(&fsg->thread_notifier);
++	}
++
++	/* Unregister the sysfs attribute files and the LUNs */
++	for (i = 0; i < fsg->nluns; ++i) {
++		curlun = &fsg->luns[i];
++		if (curlun->registered) {
++			device_remove_file(&curlun->dev, &dev_attr_nofua);
++			device_remove_file(&curlun->dev, &dev_attr_ro);
++			device_remove_file(&curlun->dev, &dev_attr_file);
++			fsg_lun_close(curlun);
++			device_unregister(&curlun->dev);
++			curlun->registered = 0;
++		}
++	}
++
++	/* Free the data buffers */
++	for (i = 0; i < fsg_num_buffers; ++i)
++		kfree(fsg->buffhds[i].buf);
++
++	/* Free the request and buffer for endpoint 0 */
++	if (req) {
++		kfree(req->buf);
++		usb_ep_free_request(fsg->ep0, req);
++	}
++
++	set_gadget_data(gadget, NULL);
++}
++
++
++static int __init check_parameters(struct fsg_dev *fsg)
++{
++	int	prot;
++	int	gcnum;
++
++	/* Store the default values */
++	mod_data.transport_type = USB_PR_BULK;
++	mod_data.transport_name = "Bulk-only";
++	mod_data.protocol_type = USB_SC_SCSI;
++	mod_data.protocol_name = "Transparent SCSI";
++
++	/* Some peripheral controllers are known not to be able to
++	 * halt bulk endpoints correctly.  If one of them is present,
++	 * disable stalls.
++	 */
++	if (gadget_is_at91(fsg->gadget))
++		mod_data.can_stall = 0;
++
++	if (mod_data.release == 0xffff) {	// Parameter wasn't set
++		gcnum = usb_gadget_controller_number(fsg->gadget);
++		if (gcnum >= 0)
++			mod_data.release = 0x0300 + gcnum;
++		else {
++			WARNING(fsg, "controller '%s' not recognized\n",
++				fsg->gadget->name);
++			mod_data.release = 0x0399;
++		}
++	}
++
++	prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++	if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) {
++		;		// Use default setting
++	} else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) {
++		mod_data.transport_type = USB_PR_CB;
++		mod_data.transport_name = "Control-Bulk";
++	} else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) {
++		mod_data.transport_type = USB_PR_CBI;
++		mod_data.transport_name = "Control-Bulk-Interrupt";
++	} else {
++		ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm);
++		return -EINVAL;
++	}
++
++	if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 ||
++			prot == USB_SC_SCSI) {
++		;		// Use default setting
++	} else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 ||
++			prot == USB_SC_RBC) {
++		mod_data.protocol_type = USB_SC_RBC;
++		mod_data.protocol_name = "RBC";
++	} else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 ||
++			strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 ||
++			prot == USB_SC_8020) {
++		mod_data.protocol_type = USB_SC_8020;
++		mod_data.protocol_name = "8020i (ATAPI)";
++	} else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 ||
++			prot == USB_SC_QIC) {
++		mod_data.protocol_type = USB_SC_QIC;
++		mod_data.protocol_name = "QIC-157";
++	} else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 ||
++			prot == USB_SC_UFI) {
++		mod_data.protocol_type = USB_SC_UFI;
++		mod_data.protocol_name = "UFI";
++	} else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 ||
++			prot == USB_SC_8070) {
++		mod_data.protocol_type = USB_SC_8070;
++		mod_data.protocol_name = "8070i";
++	} else {
++		ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm);
++		return -EINVAL;
++	}
++
++	mod_data.buflen &= PAGE_CACHE_MASK;
++	if (mod_data.buflen <= 0) {
++		ERROR(fsg, "invalid buflen\n");
++		return -ETOOSMALL;
++	}
++
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++	/* Serial string handling.
++	 * On a real device, the serial string would be loaded
++	 * from permanent storage. */
++	if (mod_data.serial) {
++		const char *ch;
++		unsigned len = 0;
++
++		/* Sanity check :
++		 * The CB[I] specification limits the serial string to
++		 * 12 uppercase hexadecimal characters.
++		 * BBB need at least 12 uppercase hexadecimal characters,
++		 * with a maximum of 126. */
++		for (ch = mod_data.serial; *ch; ++ch) {
++			++len;
++			if ((*ch < '0' || *ch > '9') &&
++			    (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
++				WARNING(fsg,
++					"Invalid serial string character: %c\n",
++					*ch);
++				goto no_serial;
++			}
++		}
++		if (len > 126 ||
++		    (mod_data.transport_type == USB_PR_BULK && len < 12) ||
++		    (mod_data.transport_type != USB_PR_BULK && len > 12)) {
++			WARNING(fsg, "Invalid serial string length!\n");
++			goto no_serial;
++		}
++		fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
++	} else {
++		WARNING(fsg, "No serial-number string provided!\n");
++ no_serial:
++		device_desc.iSerialNumber = 0;
++	}
++
++	return 0;
++}
++
++
++static int __init fsg_bind(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = the_fsg;
++	int			rc;
++	int			i;
++	struct fsg_lun		*curlun;
++	struct usb_ep		*ep;
++	struct usb_request	*req;
++	char			*pathbuf, *p;
++
++	fsg->gadget = gadget;
++	set_gadget_data(gadget, fsg);
++	fsg->ep0 = gadget->ep0;
++	fsg->ep0->driver_data = fsg;
++
++	if ((rc = check_parameters(fsg)) != 0)
++		goto out;
++
++	if (mod_data.removable) {	// Enable the store_xxx attributes
++		dev_attr_file.attr.mode = 0644;
++		dev_attr_file.store = fsg_store_file;
++		if (!mod_data.cdrom) {
++			dev_attr_ro.attr.mode = 0644;
++			dev_attr_ro.store = fsg_store_ro;
++		}
++	}
++
++	/* Only for removable media? */
++	dev_attr_nofua.attr.mode = 0644;
++	dev_attr_nofua.store = fsg_store_nofua;
++
++	/* Find out how many LUNs there should be */
++	i = mod_data.nluns;
++	if (i == 0)
++		i = max(mod_data.num_filenames, 1u);
++	if (i > FSG_MAX_LUNS) {
++		ERROR(fsg, "invalid number of LUNs: %d\n", i);
++		rc = -EINVAL;
++		goto out;
++	}
++
++	/* Create the LUNs, open their backing files, and register the
++	 * LUN devices in sysfs. */
++	fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL);
++	if (!fsg->luns) {
++		rc = -ENOMEM;
++		goto out;
++	}
++	fsg->nluns = i;
++
++	for (i = 0; i < fsg->nluns; ++i) {
++		curlun = &fsg->luns[i];
++		curlun->cdrom = !!mod_data.cdrom;
++		curlun->ro = mod_data.cdrom || mod_data.ro[i];
++		curlun->initially_ro = curlun->ro;
++		curlun->removable = mod_data.removable;
++		curlun->nofua = mod_data.nofua[i];
++		curlun->dev.release = lun_release;
++		curlun->dev.parent = &gadget->dev;
++		curlun->dev.driver = &fsg_driver.driver;
++		dev_set_drvdata(&curlun->dev, &fsg->filesem);
++		dev_set_name(&curlun->dev,"%s-lun%d",
++			     dev_name(&gadget->dev), i);
++
++		kref_get(&fsg->ref);
++		rc = device_register(&curlun->dev);
++		if (rc) {
++			INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
++			put_device(&curlun->dev);
++			goto out;
++		}
++		curlun->registered = 1;
++
++		rc = device_create_file(&curlun->dev, &dev_attr_ro);
++		if (rc)
++			goto out;
++		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
++		if (rc)
++			goto out;
++		rc = device_create_file(&curlun->dev, &dev_attr_file);
++		if (rc)
++			goto out;
++
++		if (mod_data.file[i] && *mod_data.file[i]) {
++			rc = fsg_lun_open(curlun, mod_data.file[i]);
++			if (rc)
++				goto out;
++		} else if (!mod_data.removable) {
++			ERROR(fsg, "no file given for LUN%d\n", i);
++			rc = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* Find all the endpoints we will use */
++	usb_ep_autoconfig_reset(gadget);
++	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
++	if (!ep)
++		goto autoconf_fail;
++	ep->driver_data = fsg;		// claim the endpoint
++	fsg->bulk_in = ep;
++
++	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
++	if (!ep)
++		goto autoconf_fail;
++	ep->driver_data = fsg;		// claim the endpoint
++	fsg->bulk_out = ep;
++
++	if (transport_is_cbi()) {
++		ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc);
++		if (!ep)
++			goto autoconf_fail;
++		ep->driver_data = fsg;		// claim the endpoint
++		fsg->intr_in = ep;
++	}
++
++	/* Fix up the descriptors */
++	device_desc.idVendor = cpu_to_le16(mod_data.vendor);
++	device_desc.idProduct = cpu_to_le16(mod_data.product);
++	device_desc.bcdDevice = cpu_to_le16(mod_data.release);
++
++	i = (transport_is_cbi() ? 3 : 2);	// Number of endpoints
++	fsg_intf_desc.bNumEndpoints = i;
++	fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type;
++	fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type;
++	fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
++
++	if (gadget_is_dualspeed(gadget)) {
++		fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
++
++		/* Assume endpoint addresses are the same for both speeds */
++		fsg_hs_bulk_in_desc.bEndpointAddress =
++			fsg_fs_bulk_in_desc.bEndpointAddress;
++		fsg_hs_bulk_out_desc.bEndpointAddress =
++			fsg_fs_bulk_out_desc.bEndpointAddress;
++		fsg_hs_intr_in_desc.bEndpointAddress =
++			fsg_fs_intr_in_desc.bEndpointAddress;
++	}
++
++	if (gadget_is_superspeed(gadget)) {
++		unsigned		max_burst;
++
++		fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
++
++		/* Calculate bMaxBurst, we know packet size is 1024 */
++		max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
++
++		/* Assume endpoint addresses are the same for both speeds */
++		fsg_ss_bulk_in_desc.bEndpointAddress =
++			fsg_fs_bulk_in_desc.bEndpointAddress;
++		fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
++
++		fsg_ss_bulk_out_desc.bEndpointAddress =
++			fsg_fs_bulk_out_desc.bEndpointAddress;
++		fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
++	}
++
++	if (gadget_is_otg(gadget))
++		fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
++
++	rc = -ENOMEM;
++
++	/* Allocate the request and buffer for endpoint 0 */
++	fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
++	if (!req)
++		goto out;
++	req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL);
++	if (!req->buf)
++		goto out;
++	req->complete = ep0_complete;
++
++	/* Allocate the data buffers */
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		struct fsg_buffhd	*bh = &fsg->buffhds[i];
++
++		/* Allocate for the bulk-in endpoint.  We assume that
++		 * the buffer will also work with the bulk-out (and
++		 * interrupt-in) endpoint. */
++		bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL);
++		if (!bh->buf)
++			goto out;
++		bh->next = bh + 1;
++	}
++	fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
++
++	/* This should reflect the actual gadget power source */
++	usb_gadget_set_selfpowered(gadget);
++
++	snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer,
++			"%s %s with %s",
++			init_utsname()->sysname, init_utsname()->release,
++			gadget->name);
++
++	fsg->thread_task = kthread_create(fsg_main_thread, fsg,
++			"file-storage-gadget");
++	if (IS_ERR(fsg->thread_task)) {
++		rc = PTR_ERR(fsg->thread_task);
++		goto out;
++	}
++
++	INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
++	INFO(fsg, "NOTE: This driver is deprecated.  "
++			"Consider using g_mass_storage instead.\n");
++	INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
++
++	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
++	for (i = 0; i < fsg->nluns; ++i) {
++		curlun = &fsg->luns[i];
++		if (fsg_lun_is_open(curlun)) {
++			p = NULL;
++			if (pathbuf) {
++				p = d_path(&curlun->filp->f_path,
++					   pathbuf, PATH_MAX);
++				if (IS_ERR(p))
++					p = NULL;
++			}
++			LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
++			      curlun->ro, curlun->nofua, (p ? p : "(error)"));
++		}
++	}
++	kfree(pathbuf);
++
++	DBG(fsg, "transport=%s (x%02x)\n",
++			mod_data.transport_name, mod_data.transport_type);
++	DBG(fsg, "protocol=%s (x%02x)\n",
++			mod_data.protocol_name, mod_data.protocol_type);
++	DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n",
++			mod_data.vendor, mod_data.product, mod_data.release);
++	DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n",
++			mod_data.removable, mod_data.can_stall,
++			mod_data.cdrom, mod_data.buflen);
++	DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task));
++
++	set_bit(REGISTERED, &fsg->atomic_bitflags);
++
++	/* Tell the thread to start working */
++	wake_up_process(fsg->thread_task);
++	return 0;
++
++autoconf_fail:
++	ERROR(fsg, "unable to autoconfigure all endpoints\n");
++	rc = -ENOTSUPP;
++
++out:
++	fsg->state = FSG_STATE_TERMINATED;	// The thread is dead
++	fsg_unbind(gadget);
++	complete(&fsg->thread_notifier);
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static void fsg_suspend(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++
++	DBG(fsg, "suspend\n");
++	set_bit(SUSPENDED, &fsg->atomic_bitflags);
++}
++
++static void fsg_resume(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++
++	DBG(fsg, "resume\n");
++	clear_bit(SUSPENDED, &fsg->atomic_bitflags);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_gadget_driver		fsg_driver = {
++	.max_speed	= USB_SPEED_SUPER,
++	.function	= (char *) fsg_string_product,
++	.unbind		= fsg_unbind,
++	.disconnect	= fsg_disconnect,
++	.setup		= fsg_setup,
++	.suspend	= fsg_suspend,
++	.resume		= fsg_resume,
++
++	.driver		= {
++		.name		= DRIVER_NAME,
++		.owner		= THIS_MODULE,
++		// .release = ...
++		// .suspend = ...
++		// .resume = ...
++	},
++};
++
++
++static int __init fsg_alloc(void)
++{
++	struct fsg_dev		*fsg;
++
++	fsg = kzalloc(sizeof *fsg +
++		      fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
++
++	if (!fsg)
++		return -ENOMEM;
++	spin_lock_init(&fsg->lock);
++	init_rwsem(&fsg->filesem);
++	kref_init(&fsg->ref);
++	init_completion(&fsg->thread_notifier);
++
++	the_fsg = fsg;
++	return 0;
++}
++
++
++static int __init fsg_init(void)
++{
++	int		rc;
++	struct fsg_dev	*fsg;
++
++	rc = fsg_num_buffers_validate();
++	if (rc != 0)
++		return rc;
++
++	if ((rc = fsg_alloc()) != 0)
++		return rc;
++	fsg = the_fsg;
++	if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0)
++		kref_put(&fsg->ref, fsg_release);
++	return rc;
++}
++module_init(fsg_init);
++
++
++static void __exit fsg_cleanup(void)
++{
++	struct fsg_dev	*fsg = the_fsg;
++
++	/* Unregister the driver iff the thread hasn't already done so */
++	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
++		usb_gadget_unregister_driver(&fsg_driver);
++
++	/* Wait for the thread to finish up */
++	wait_for_completion(&fsg->thread_notifier);
++
++	kref_put(&fsg->ref, fsg_release);
++}
++module_exit(fsg_cleanup);
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/changes.txt linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/changes.txt
+--- linux-3.10/drivers/usb/host/dwc_common_port/changes.txt	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/changes.txt	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,174 @@
++
++dwc_read_reg32() and friends now take an additional parameter, a pointer to an
++IO context struct. The IO context struct should live in an os-dependent struct
++in your driver. As an example, the dwc_usb3 driver has an os-dependent struct
++named 'os_dep' embedded in the main device struct. So there these calls look
++like this:
++
++	dwc_read_reg32(&usb3_dev->os_dep.ioctx, &pcd->dev_global_regs->dcfg);
++
++	dwc_write_reg32(&usb3_dev->os_dep.ioctx,
++			&pcd->dev_global_regs->dcfg, 0);
++
++Note that for the existing Linux driver ports, it is not necessary to actually
++define the 'ioctx' member in the os-dependent struct. Since Linux does not
++require an IO context, its macros for dwc_read_reg32() and friends do not
++use the context pointer, so it is optimized away by the compiler. But it is
++necessary to add the pointer parameter to all of the call sites, to be ready
++for any future ports (such as FreeBSD) which do require an IO context.
++
++
++Similarly, dwc_alloc(), dwc_alloc_atomic(), dwc_strdup(), and dwc_free() now
++take an additional parameter, a pointer to a memory context. Examples:
++
++	addr = dwc_alloc(&usb3_dev->os_dep.memctx, size);
++
++	dwc_free(&usb3_dev->os_dep.memctx, addr);
++
++Again, for the Linux ports, it is not necessary to actually define the memctx
++member, but it is necessary to add the pointer parameter to all of the call
++sites.
++
++
++Same for dwc_dma_alloc() and dwc_dma_free(). Examples:
++
++	virt_addr = dwc_dma_alloc(&usb3_dev->os_dep.dmactx, size, &phys_addr);
++
++	dwc_dma_free(&usb3_dev->os_dep.dmactx, size, virt_addr, phys_addr);
++
++
++Same for dwc_mutex_alloc() and dwc_mutex_free(). Examples:
++
++	mutex = dwc_mutex_alloc(&usb3_dev->os_dep.mtxctx);
++
++	dwc_mutex_free(&usb3_dev->os_dep.mtxctx, mutex);
++
++
++Same for dwc_spinlock_alloc() and dwc_spinlock_free(). Examples:
++
++	lock = dwc_spinlock_alloc(&usb3_dev->osdep.splctx);
++
++	dwc_spinlock_free(&usb3_dev->osdep.splctx, lock);
++
++
++Same for dwc_timer_alloc(). Example:
++
++	timer = dwc_timer_alloc(&usb3_dev->os_dep.tmrctx, "dwc_usb3_tmr1",
++				cb_func, cb_data);
++
++
++Same for dwc_waitq_alloc(). Example:
++
++	waitq = dwc_waitq_alloc(&usb3_dev->os_dep.wtqctx);
++
++
++Same for dwc_thread_run(). Example:
++
++	thread = dwc_thread_run(&usb3_dev->os_dep.thdctx, func,
++				"dwc_usb3_thd1", data);
++
++
++Same for dwc_workq_alloc(). Example:
++
++	workq = dwc_workq_alloc(&usb3_dev->osdep.wkqctx, "dwc_usb3_wkq1");
++
++
++Same for dwc_task_alloc(). Example:
++
++	task = dwc_task_alloc(&usb3_dev->os_dep.tskctx, "dwc_usb3_tsk1",
++			      cb_func, cb_data);
++
++
++In addition to the context pointer additions, a few core functions have had
++other changes made to their parameters:
++
++The 'flags' parameter to dwc_spinlock_irqsave() and dwc_spinunlock_irqrestore()
++has been changed from a uint64_t to a dwc_irqflags_t.
++
++dwc_thread_should_stop() now takes a 'dwc_thread_t *' parameter, because the
++FreeBSD equivalent of that function requires it.
++
++And, in addition to the context pointer, dwc_task_alloc() also adds a
++'char *name' parameter, to be consistent with dwc_thread_run() and
++dwc_workq_alloc(), and because the FreeBSD equivalent of that function
++requires a unique name.
++
++
++Here is a complete list of the core functions that now take a pointer to a
++context as their first parameter:
++
++	dwc_read_reg32
++	dwc_read_reg64
++	dwc_write_reg32
++	dwc_write_reg64
++	dwc_modify_reg32
++	dwc_modify_reg64
++	dwc_alloc
++	dwc_alloc_atomic
++	dwc_strdup
++	dwc_free
++	dwc_dma_alloc
++	dwc_dma_free
++	dwc_mutex_alloc
++	dwc_mutex_free
++	dwc_spinlock_alloc
++	dwc_spinlock_free
++	dwc_timer_alloc
++	dwc_waitq_alloc
++	dwc_thread_run
++	dwc_workq_alloc
++	dwc_task_alloc     Also adds a 'char *name' as its 2nd parameter
++
++And here are the core functions that have other changes to their parameters:
++
++	dwc_spinlock_irqsave      'flags' param is now a 'dwc_irqflags_t *'
++	dwc_spinunlock_irqrestore 'flags' param is now a 'dwc_irqflags_t'
++	dwc_thread_should_stop    Adds a 'dwc_thread_t *' parameter
++
++
++
++The changes to the core functions also require some of the other library
++functions to change:
++
++	dwc_cc_if_alloc() and dwc_cc_if_free() now take a 'void *memctx'
++	(for memory allocation) as the 1st param and a 'void *mtxctx'
++	(for mutex allocation) as the 2nd param.
++
++	dwc_cc_clear(), dwc_cc_add(), dwc_cc_change(), dwc_cc_remove(),
++	dwc_cc_data_for_save(), and dwc_cc_restore_from_data() now take a
++	'void *memctx' as the 1st param.
++
++	dwc_dh_modpow(), dwc_dh_pk(), and dwc_dh_derive_keys() now take a
++	'void *memctx' as the 1st param.
++
++	dwc_modpow() now takes a 'void *memctx' as the 1st param.
++
++	dwc_alloc_notification_manager() now takes a 'void *memctx' as the
++	1st param and a 'void *wkqctx' (for work queue allocation) as the 2nd
++	param, and also now returns an integer value that is non-zero if
++	allocation of its data structures or work queue fails.
++
++	dwc_register_notifier() now takes a 'void *memctx' as the 1st param.
++
++	dwc_memory_debug_start() now takes a 'void *mem_ctx' as the first
++	param, and also now returns an integer value that is non-zero if
++	allocation of its data structures fails.
++
++
++
++Other miscellaneous changes:
++
++The DEBUG_MEMORY and DEBUG_REGS #define's have been renamed to
++DWC_DEBUG_MEMORY and DWC_DEBUG_REGS.
++
++The following #define's have been added to allow selectively compiling library
++features:
++
++	DWC_CCLIB
++	DWC_CRYPTOLIB
++	DWC_NOTIFYLIB
++	DWC_UTFLIB
++
++A DWC_LIBMODULE #define has also been added. If this is not defined, then the
++module code in dwc_common_linux.c is not compiled in. This allows linking the
++library code directly into a driver module, instead of as a standalone module.
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/doc/doxygen.cfg linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/doc/doxygen.cfg
+--- linux-3.10/drivers/usb/host/dwc_common_port/doc/doxygen.cfg	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/doc/doxygen.cfg	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,270 @@
++# Doxyfile 1.4.5
++
++#---------------------------------------------------------------------------
++# Project related configuration options
++#---------------------------------------------------------------------------
++PROJECT_NAME           = "Synopsys DWC Portability and Common Library for UWB"
++PROJECT_NUMBER         = 
++OUTPUT_DIRECTORY       = doc
++CREATE_SUBDIRS         = NO
++OUTPUT_LANGUAGE        = English
++BRIEF_MEMBER_DESC      = YES
++REPEAT_BRIEF           = YES
++ABBREVIATE_BRIEF       = "The $name class" \
++                         "The $name widget" \
++                         "The $name file" \
++                         is \
++                         provides \
++                         specifies \
++                         contains \
++                         represents \
++                         a \
++                         an \
++                         the
++ALWAYS_DETAILED_SEC    = YES
++INLINE_INHERITED_MEMB  = NO
++FULL_PATH_NAMES        = NO
++STRIP_FROM_PATH        = ..
++STRIP_FROM_INC_PATH    = 
++SHORT_NAMES            = NO
++JAVADOC_AUTOBRIEF      = YES
++MULTILINE_CPP_IS_BRIEF = NO
++DETAILS_AT_TOP         = YES
++INHERIT_DOCS           = YES
++SEPARATE_MEMBER_PAGES  = NO
++TAB_SIZE               = 8
++ALIASES                = 
++OPTIMIZE_OUTPUT_FOR_C  = YES
++OPTIMIZE_OUTPUT_JAVA   = NO
++BUILTIN_STL_SUPPORT    = NO
++DISTRIBUTE_GROUP_DOC   = NO
++SUBGROUPING            = NO
++#---------------------------------------------------------------------------
++# Build related configuration options
++#---------------------------------------------------------------------------
++EXTRACT_ALL            = NO
++EXTRACT_PRIVATE        = NO
++EXTRACT_STATIC         = YES
++EXTRACT_LOCAL_CLASSES  = NO
++EXTRACT_LOCAL_METHODS  = NO
++HIDE_UNDOC_MEMBERS     = NO
++HIDE_UNDOC_CLASSES     = NO
++HIDE_FRIEND_COMPOUNDS  = NO
++HIDE_IN_BODY_DOCS      = NO
++INTERNAL_DOCS          = NO
++CASE_SENSE_NAMES       = YES
++HIDE_SCOPE_NAMES       = NO
++SHOW_INCLUDE_FILES     = NO
++INLINE_INFO            = YES
++SORT_MEMBER_DOCS       = NO
++SORT_BRIEF_DOCS        = NO
++SORT_BY_SCOPE_NAME     = NO
++GENERATE_TODOLIST      = YES
++GENERATE_TESTLIST      = YES
++GENERATE_BUGLIST       = YES
++GENERATE_DEPRECATEDLIST= YES
++ENABLED_SECTIONS       = 
++MAX_INITIALIZER_LINES  = 30
++SHOW_USED_FILES        = YES
++SHOW_DIRECTORIES       = YES
++FILE_VERSION_FILTER    = 
++#---------------------------------------------------------------------------
++# configuration options related to warning and progress messages
++#---------------------------------------------------------------------------
++QUIET                  = YES
++WARNINGS               = YES
++WARN_IF_UNDOCUMENTED   = NO
++WARN_IF_DOC_ERROR      = YES
++WARN_NO_PARAMDOC       = YES
++WARN_FORMAT            = "$file:$line: $text"
++WARN_LOGFILE           = 
++#---------------------------------------------------------------------------
++# configuration options related to the input files
++#---------------------------------------------------------------------------
++INPUT                  = .
++FILE_PATTERNS          = *.c \
++                         *.cc \
++                         *.cxx \
++                         *.cpp \
++                         *.c++ \
++                         *.d \
++                         *.java \
++                         *.ii \
++                         *.ixx \
++                         *.ipp \
++                         *.i++ \
++                         *.inl \
++                         *.h \
++                         *.hh \
++                         *.hxx \
++                         *.hpp \
++                         *.h++ \
++                         *.idl \
++                         *.odl \
++                         *.cs \
++                         *.php \
++                         *.php3 \
++                         *.inc \
++                         *.m \
++                         *.mm \
++                         *.dox \
++                         *.py \
++                         *.C \
++                         *.CC \
++                         *.C++ \
++                         *.II \
++                         *.I++ \
++                         *.H \
++                         *.HH \
++                         *.H++ \
++                         *.CS \
++                         *.PHP \
++                         *.PHP3 \
++                         *.M \
++                         *.MM \
++                         *.PY
++RECURSIVE              = NO
++EXCLUDE                = 
++EXCLUDE_SYMLINKS       = NO
++EXCLUDE_PATTERNS       = 
++EXAMPLE_PATH           = 
++EXAMPLE_PATTERNS       = *
++EXAMPLE_RECURSIVE      = NO
++IMAGE_PATH             = 
++INPUT_FILTER           = 
++FILTER_PATTERNS        = 
++FILTER_SOURCE_FILES    = NO
++#---------------------------------------------------------------------------
++# configuration options related to source browsing
++#---------------------------------------------------------------------------
++SOURCE_BROWSER         = NO
++INLINE_SOURCES         = NO
++STRIP_CODE_COMMENTS    = YES
++REFERENCED_BY_RELATION = YES
++REFERENCES_RELATION    = YES
++USE_HTAGS              = NO
++VERBATIM_HEADERS       = NO
++#---------------------------------------------------------------------------
++# configuration options related to the alphabetical class index
++#---------------------------------------------------------------------------
++ALPHABETICAL_INDEX     = NO
++COLS_IN_ALPHA_INDEX    = 5
++IGNORE_PREFIX          = 
++#---------------------------------------------------------------------------
++# configuration options related to the HTML output
++#---------------------------------------------------------------------------
++GENERATE_HTML          = YES
++HTML_OUTPUT            = html
++HTML_FILE_EXTENSION    = .html
++HTML_HEADER            = 
++HTML_FOOTER            = 
++HTML_STYLESHEET        = 
++HTML_ALIGN_MEMBERS     = YES
++GENERATE_HTMLHELP      = NO
++CHM_FILE               = 
++HHC_LOCATION           = 
++GENERATE_CHI           = NO
++BINARY_TOC             = NO
++TOC_EXPAND             = NO
++DISABLE_INDEX          = NO
++ENUM_VALUES_PER_LINE   = 4
++GENERATE_TREEVIEW      = YES
++TREEVIEW_WIDTH         = 250
++#---------------------------------------------------------------------------
++# configuration options related to the LaTeX output
++#---------------------------------------------------------------------------
++GENERATE_LATEX         = NO
++LATEX_OUTPUT           = latex
++LATEX_CMD_NAME         = latex
++MAKEINDEX_CMD_NAME     = makeindex
++COMPACT_LATEX          = NO
++PAPER_TYPE             = a4wide
++EXTRA_PACKAGES         = 
++LATEX_HEADER           = 
++PDF_HYPERLINKS         = NO
++USE_PDFLATEX           = NO
++LATEX_BATCHMODE        = NO
++LATEX_HIDE_INDICES     = NO
++#---------------------------------------------------------------------------
++# configuration options related to the RTF output
++#---------------------------------------------------------------------------
++GENERATE_RTF           = NO
++RTF_OUTPUT             = rtf
++COMPACT_RTF            = NO
++RTF_HYPERLINKS         = NO
++RTF_STYLESHEET_FILE    = 
++RTF_EXTENSIONS_FILE    = 
++#---------------------------------------------------------------------------
++# configuration options related to the man page output
++#---------------------------------------------------------------------------
++GENERATE_MAN           = NO
++MAN_OUTPUT             = man
++MAN_EXTENSION          = .3
++MAN_LINKS              = NO
++#---------------------------------------------------------------------------
++# configuration options related to the XML output
++#---------------------------------------------------------------------------
++GENERATE_XML           = NO
++XML_OUTPUT             = xml
++XML_SCHEMA             = 
++XML_DTD                = 
++XML_PROGRAMLISTING     = YES
++#---------------------------------------------------------------------------
++# configuration options for the AutoGen Definitions output
++#---------------------------------------------------------------------------
++GENERATE_AUTOGEN_DEF   = NO
++#---------------------------------------------------------------------------
++# configuration options related to the Perl module output
++#---------------------------------------------------------------------------
++GENERATE_PERLMOD       = NO
++PERLMOD_LATEX          = NO
++PERLMOD_PRETTY         = YES
++PERLMOD_MAKEVAR_PREFIX = 
++#---------------------------------------------------------------------------
++# Configuration options related to the preprocessor   
++#---------------------------------------------------------------------------
++ENABLE_PREPROCESSING   = YES
++MACRO_EXPANSION        = NO
++EXPAND_ONLY_PREDEF     = NO
++SEARCH_INCLUDES        = YES
++INCLUDE_PATH           = 
++INCLUDE_FILE_PATTERNS  = 
++PREDEFINED             = DEBUG DEBUG_MEMORY
++EXPAND_AS_DEFINED      = 
++SKIP_FUNCTION_MACROS   = YES
++#---------------------------------------------------------------------------
++# Configuration::additions related to external references   
++#---------------------------------------------------------------------------
++TAGFILES               = 
++GENERATE_TAGFILE       = 
++ALLEXTERNALS           = NO
++EXTERNAL_GROUPS        = YES
++PERL_PATH              = /usr/bin/perl
++#---------------------------------------------------------------------------
++# Configuration options related to the dot tool   
++#---------------------------------------------------------------------------
++CLASS_DIAGRAMS         = YES
++HIDE_UNDOC_RELATIONS   = YES
++HAVE_DOT               = NO
++CLASS_GRAPH            = YES
++COLLABORATION_GRAPH    = YES
++GROUP_GRAPHS           = YES
++UML_LOOK               = NO
++TEMPLATE_RELATIONS     = NO
++INCLUDE_GRAPH          = NO
++INCLUDED_BY_GRAPH      = YES
++CALL_GRAPH             = NO
++GRAPHICAL_HIERARCHY    = YES
++DIRECTORY_GRAPH        = YES
++DOT_IMAGE_FORMAT       = png
++DOT_PATH               = 
++DOTFILE_DIRS           = 
++MAX_DOT_GRAPH_DEPTH    = 1000
++DOT_TRANSPARENT        = NO
++DOT_MULTI_TARGETS      = NO
++GENERATE_LEGEND        = YES
++DOT_CLEANUP            = YES
++#---------------------------------------------------------------------------
++# Configuration::additions related to the search engine   
++#---------------------------------------------------------------------------
++SEARCHENGINE           = NO
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_cc.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_cc.c
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_cc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_cc.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,532 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $
++ * $Revision: #4 $
++ * $Date: 2010/11/04 $
++ * $Change: 1621692 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifdef DWC_CCLIB
++
++#include "dwc_cc.h"
++
++typedef struct dwc_cc
++{
++	uint32_t uid;
++	uint8_t chid[16];
++	uint8_t cdid[16];
++	uint8_t ck[16];
++	uint8_t *name;
++	uint8_t length;
++        DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry;
++} dwc_cc_t;
++
++DWC_CIRCLEQ_HEAD(context_list, dwc_cc);
++
++/** The main structure for CC management.  */
++struct dwc_cc_if
++{
++	dwc_mutex_t *mutex;
++	char *filename;
++
++	unsigned is_host:1;
++
++	dwc_notifier_t *notifier;
++
++	struct context_list list;
++};
++
++#ifdef DEBUG
++static inline void dump_bytes(char *name, uint8_t *bytes, int len)
++{
++	int i;
++	DWC_PRINTF("%s: ", name);
++	for (i=0; i<len; i++) {
++		DWC_PRINTF("%02x ", bytes[i]);
++	}
++	DWC_PRINTF("\n");
++}
++#else
++#define dump_bytes(x...)
++#endif
++
++static dwc_cc_t *alloc_cc(void *mem_ctx, uint8_t *name, uint32_t length)
++{
++	dwc_cc_t *cc = dwc_alloc(mem_ctx, sizeof(dwc_cc_t));
++	if (!cc) {
++		return NULL;
++	}
++	DWC_MEMSET(cc, 0, sizeof(dwc_cc_t));
++
++	if (name) {
++		cc->length = length;
++		cc->name = dwc_alloc(mem_ctx, length);
++		if (!cc->name) {
++			dwc_free(mem_ctx, cc);
++			return NULL;
++		}
++
++		DWC_MEMCPY(cc->name, name, length);
++	}
++
++	return cc;
++}
++
++static void free_cc(void *mem_ctx, dwc_cc_t *cc)
++{
++	if (cc->name) {
++		dwc_free(mem_ctx, cc->name);
++	}
++	dwc_free(mem_ctx, cc);
++}
++
++static uint32_t next_uid(dwc_cc_if_t *cc_if)
++{
++	uint32_t uid = 0;
++	dwc_cc_t *cc;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (cc->uid > uid) {
++			uid = cc->uid;
++		}
++	}
++
++	if (uid == 0) {
++		uid = 255;
++	}
++
++	return uid + 1;
++}
++
++static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid)
++{
++	dwc_cc_t *cc;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (cc->uid == uid) {
++			return cc;
++		}
++	}
++	return NULL;
++}
++
++static unsigned int cc_data_size(dwc_cc_if_t *cc_if)
++{
++	unsigned int size = 0;
++	dwc_cc_t *cc;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		size += (48 + 1);
++		if (cc->name) {
++			size += cc->length;
++		}
++	}
++	return size;
++}
++
++static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid)
++{
++	uint32_t uid = 0;
++	dwc_cc_t *cc;
++
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (DWC_MEMCMP(cc->chid, chid, 16) == 0) {
++			uid = cc->uid;
++			break;
++		}
++	}
++	return uid;
++}
++static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid)
++{
++	uint32_t uid = 0;
++	dwc_cc_t *cc;
++
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) {
++			uid = cc->uid;
++			break;
++		}
++	}
++	return uid;
++}
++
++/* Internal cc_add */
++static int32_t cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
++		      uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
++{
++	dwc_cc_t *cc;
++	uint32_t uid;
++
++	if (cc_if->is_host) {
++		uid = cc_match_cdid(cc_if, cdid);
++	}
++	else {
++		uid = cc_match_chid(cc_if, chid);
++	}
++
++	if (uid) {
++		DWC_DEBUGC("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length);
++		cc = cc_find(cc_if, uid);
++	}
++	else {
++		cc = alloc_cc(mem_ctx, name, length);
++		cc->uid = next_uid(cc_if);
++		DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry);
++	}
++
++	DWC_MEMCPY(&(cc->chid[0]), chid, 16);
++	DWC_MEMCPY(&(cc->cdid[0]), cdid, 16);
++	DWC_MEMCPY(&(cc->ck[0]), ck, 16);
++
++	DWC_DEBUGC("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length);
++	dump_bytes("CHID", cc->chid, 16);
++	dump_bytes("CDID", cc->cdid, 16);
++	dump_bytes("CK", cc->ck, 16);
++	return cc->uid;
++}
++
++/* Internal cc_clear */
++static void cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if)
++{
++	while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) {
++		dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list);
++		DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry);
++		free_cc(mem_ctx, cc);
++	}
++}
++
++dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, 
++			     dwc_notifier_t *notifier, unsigned is_host)
++{
++	dwc_cc_if_t *cc_if = NULL;
++
++	/* Allocate a common_cc_if structure */
++	cc_if = dwc_alloc(mem_ctx, sizeof(dwc_cc_if_t));
++
++	if (!cc_if)
++		return NULL;
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++	DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex);
++#else
++	cc_if->mutex = dwc_mutex_alloc(mtx_ctx);
++#endif
++	if (!cc_if->mutex) {
++		dwc_free(mem_ctx, cc_if);
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INIT(&cc_if->list);
++	cc_if->is_host = is_host;
++	cc_if->notifier = notifier;
++	return cc_if;
++}
++
++void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if)
++{
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++	DWC_MUTEX_FREE(cc_if->mutex);
++#else
++	dwc_mutex_free(mtx_ctx, cc_if->mutex);
++#endif
++	cc_clear(mem_ctx, cc_if);
++	dwc_free(mem_ctx, cc_if);
++}
++
++static void cc_changed(dwc_cc_if_t *cc_if)
++{
++	if (cc_if->notifier) {
++		dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if);
++	}
++}
++
++void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if)
++{
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc_clear(mem_ctx, cc_if);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	cc_changed(cc_if);
++}
++
++int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
++		   uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
++{
++	uint32_t uid;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	uid = cc_add(mem_ctx, cc_if, chid, cdid, ck, name, length);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	cc_changed(cc_if);
++
++	return uid;
++}
++
++void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid,
++		   uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
++{
++	dwc_cc_t* cc;
++
++	DWC_DEBUGC("Change connection context %d", id);
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (!cc) {
++		DWC_ERROR("Uid %d not found in cc list\n", id);
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return;
++	}
++
++	if (chid) {
++		DWC_MEMCPY(&(cc->chid[0]), chid, 16);
++	}
++	if (cdid) {
++		DWC_MEMCPY(&(cc->cdid[0]), cdid, 16);
++	}
++	if (ck) {
++		DWC_MEMCPY(&(cc->ck[0]), ck, 16);
++	}
++
++	if (name) {
++		if (cc->name) {
++			dwc_free(mem_ctx, cc->name);
++		}
++		cc->name = dwc_alloc(mem_ctx, length);
++		if (!cc->name) {
++			DWC_ERROR("Out of memory in dwc_cc_change()\n");
++			DWC_MUTEX_UNLOCK(cc_if->mutex);
++			return;
++		}
++		cc->length = length;
++		DWC_MEMCPY(cc->name, name, length);
++	}
++
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	cc_changed(cc_if);
++
++	DWC_DEBUGC("Changed connection context id=%d\n", id);
++	dump_bytes("New CHID", cc->chid, 16);
++	dump_bytes("New CDID", cc->cdid, 16);
++	dump_bytes("New CK", cc->ck, 16);
++}
++
++void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id)
++{
++	dwc_cc_t *cc;
++
++	DWC_DEBUGC("Removing connection context %d", id);
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (!cc) {
++		DWC_ERROR("Uid %d not found in cc list\n", id);
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return;
++	}
++
++	DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	free_cc(mem_ctx, cc);
++
++	cc_changed(cc_if);
++}
++
++uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, unsigned int *length)
++{
++	uint8_t *buf, *x;
++	uint8_t zero = 0;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	*length = cc_data_size(cc_if);
++	if (!(*length)) {
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return NULL;
++	}
++
++	DWC_DEBUGC("Creating data for saving (length=%d)", *length);
++
++	buf = dwc_alloc(mem_ctx, *length);
++	if (!buf) {
++		*length = 0;
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return NULL;
++	}
++
++	x = buf;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		DWC_MEMCPY(x, cc->chid, 16);
++		x += 16;
++		DWC_MEMCPY(x, cc->cdid, 16);
++		x += 16;
++		DWC_MEMCPY(x, cc->ck, 16);
++		x += 16;
++		if (cc->name) {
++			DWC_MEMCPY(x, &cc->length, 1);
++			x += 1;
++			DWC_MEMCPY(x, cc->name, cc->length);
++			x += cc->length;
++		}
++		else {
++			DWC_MEMCPY(x, &zero, 1);
++			x += 1;
++		}
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return buf;
++}
++
++void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length)
++{
++	uint8_t name_length;
++	uint8_t *name;
++	uint8_t *chid;
++	uint8_t *cdid;
++	uint8_t *ck;
++	uint32_t i = 0;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc_clear(mem_ctx, cc_if);
++
++	while (i < length) {
++		chid = &data[i];
++		i += 16;
++		cdid = &data[i];
++		i += 16;
++		ck = &data[i];
++		i += 16;
++
++		name_length = data[i];
++		i ++;
++
++		if (name_length) {
++			name = &data[i];
++			i += name_length;
++		}
++		else {
++			name = NULL;
++		}
++
++		/* check to see if we haven't overflown the buffer */
++		if (i > length) {
++			DWC_ERROR("Data format error while attempting to load CCs "
++				  "(nlen=%d, iter=%d, buflen=%d).\n", name_length, i, length);
++			break;
++		}
++
++		cc_add(mem_ctx, cc_if, chid, cdid, ck, name, name_length);
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	cc_changed(cc_if);
++}
++
++uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid)
++{
++	uint32_t uid = 0;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	uid = cc_match_chid(cc_if, chid);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	return uid;
++}
++uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid)
++{
++	uint32_t uid = 0;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	uid = cc_match_cdid(cc_if, cdid);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	return uid;
++}
++
++uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id)
++{
++	uint8_t *ck = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		ck = cc->ck;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return ck;
++
++}
++
++uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id)
++{
++	uint8_t *retval = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		retval = cc->chid;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return retval;
++}
++
++uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id)
++{
++	uint8_t *retval = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		retval = cc->cdid;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return retval;
++}
++
++uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length)
++{
++	uint8_t *retval = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	*length = 0;
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		*length = cc->length;
++		retval = cc->name;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return retval;
++}
++
++#endif	/* DWC_CCLIB */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_cc.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_cc.h
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_cc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_cc.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,225 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $
++ * $Revision: #4 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifndef _DWC_CC_H_
++#define _DWC_CC_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * This file defines the Context Context library.
++ *
++ * The main data structure is dwc_cc_if_t which is returned by either the
++ * dwc_cc_if_alloc function or returned by the module to the user via a provided
++ * function. The data structure is opaque and should only be manipulated via the
++ * functions provied in this API.
++ *
++ * It manages a list of connection contexts and operations can be performed to
++ * add, remove, query, search, and change, those contexts.  Additionally,
++ * a dwc_notifier_t object can be requested from the manager so that
++ * the user can be notified whenever the context list has changed.
++ */
++
++#include "dwc_os.h"
++#include "dwc_list.h"
++#include "dwc_notifier.h"
++
++
++/* Notifications */
++#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION"
++
++struct dwc_cc_if;
++typedef struct dwc_cc_if dwc_cc_if_t;
++
++
++/** @name Connection Context Operations */
++/** @{ */
++
++/** This function allocates memory for a dwc_cc_if_t structure, initializes
++ * fields to default values, and returns a pointer to the structure or NULL on
++ * error. */
++extern dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx,
++				    dwc_notifier_t *notifier, unsigned is_host);
++
++/** Frees the memory for the specified CC structure allocated from
++ * dwc_cc_if_alloc(). */
++extern void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if);
++
++/** Removes all contexts from the connection context list */
++extern void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if);
++
++/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list.
++ * If a CHID already exists, the CK and name are overwritten.  Statistics are
++ * not overwritten.
++ *
++ * @param cc_if The cc_if structure.
++ * @param chid A pointer to the 16-byte CHID.  This value will be copied.
++ * @param ck A pointer to the 16-byte CK.  This value will be copied.
++ * @param cdid A pointer to the 16-byte CDID.  This value will be copied.
++ * @param name An optional host friendly name as defined in the association model
++ * spec.  Must be a UTF16-LE unicode string.  Can be NULL to indicated no name.
++ * @param length The length othe unicode string.
++ * @return A unique identifier used to refer to this context that is valid for
++ * as long as this context is still in the list. */
++extern int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
++			  uint8_t *cdid, uint8_t *ck, uint8_t *name,
++			  uint8_t length);
++
++/** Changes the CHID, CK, CDID, or Name values of a connection context in the
++ * list, preserving any accumulated statistics.  This would typically be called
++ * if the host decideds to change the context with a SET_CONNECTION request.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @param chid A pointer to the 16-byte CHID.  This value will be copied.  NULL
++ * indicates no change.
++ * @param cdid A pointer to the 16-byte CDID.  This value will be copied.  NULL
++ * indicates no change.
++ * @param ck A pointer to the 16-byte CK.  This value will be copied.  NULL
++ * indicates no change.
++ * @param name Host friendly name UTF16-LE.  NULL indicates no change.
++ * @param length Length of name. */
++extern void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id,
++			  uint8_t *chid, uint8_t *cdid, uint8_t *ck,
++			  uint8_t *name, uint8_t length);
++
++/** Remove the specified connection context.
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context to remove. */
++extern void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id);
++
++/** Get a binary block of data for the connection context list and attributes.
++ * This data can be used by the OS specific driver to save the connection
++ * context list into non-volatile memory.
++ *
++ * @param cc_if The cc_if structure.
++ * @param length Return the length of the data buffer.
++ * @return A pointer to the data buffer.  The memory for this buffer should be
++ * freed with DWC_FREE() after use. */
++extern uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if,
++				     unsigned int *length);
++
++/** Restore the connection context list from the binary data that was previously
++ * returned from a call to dwc_cc_data_for_save.  This can be used by the OS specific
++ * driver to load a connection context list from non-volatile memory.
++ *
++ * @param cc_if The cc_if structure.
++ * @param data The data bytes as returned from dwc_cc_data_for_save.
++ * @param length The length of the data. */
++extern void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if,
++				     uint8_t *data, unsigned int length);
++
++/** Find the connection context from the specified CHID.
++ *
++ * @param cc_if The cc_if structure.
++ * @param chid A pointer to the CHID data.
++ * @return A non-zero identifier of the connection context if the CHID matches.
++ * Otherwise returns 0. */
++extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid);
++
++/** Find the connection context from the specified CDID.
++ *
++ * @param cc_if The cc_if structure.
++ * @param cdid A pointer to the CDID data.
++ * @return A non-zero identifier of the connection context if the CHID matches.
++ * Otherwise returns 0. */
++extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid);
++
++/** Retrieve the CK from the specified connection context.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @return A pointer to the CK data.  The memory does not need to be freed. */
++extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id);
++
++/** Retrieve the CHID from the specified connection context.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @return A pointer to the CHID data.  The memory does not need to be freed. */
++extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id);
++
++/** Retrieve the CDID from the specified connection context.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @return A pointer to the CDID data.  The memory does not need to be freed. */
++extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id);
++
++extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length);
++
++/** Checks a buffer for non-zero.
++ * @param id A pointer to a 16 byte buffer. 
++ * @return true if the 16 byte value is non-zero. */
++static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) {
++	int i;
++	for (i=0; i<16; i++) {
++		if (id[i]) return 1;
++	}
++	return 0;
++}
++
++/** Checks a buffer for zero.
++ * @param id A pointer to a 16 byte buffer. 
++ * @return true if the 16 byte value is zero. */
++static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) {
++	return !dwc_assoc_is_not_zero_id(id);
++}
++
++/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into
++ * buffer. */
++static inline int dwc_print_id_string(char *buffer, uint8_t *id) {
++	char *ptr = buffer;
++	int i;
++	for (i=0; i<16; i++) {
++		ptr += DWC_SPRINTF(ptr, "%02x", id[i]);
++		if (i < 15) {
++			ptr += DWC_SPRINTF(ptr, " ");
++		}
++	}
++	return ptr - buffer;
++}
++
++/** @} */
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_CC_H_ */
++
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1308 @@
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++#ifdef DWC_CCLIB
++# include "dwc_cc.h"
++#endif
++
++#ifdef DWC_CRYPTOLIB
++# include "dwc_modpow.h"
++# include "dwc_dh.h"
++# include "dwc_crypto.h"
++#endif
++
++#ifdef DWC_NOTIFYLIB
++# include "dwc_notifier.h"
++#endif
++
++/* OS-Level Implementations */
++
++/* This is the FreeBSD 7.0 kernel implementation of the DWC platform library. */
++
++
++/* MISC */
++
++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
++{
++	return memset(dest, byte, size);
++}
++
++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
++{
++	return memcpy(dest, src, size);
++}
++
++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
++{
++	bcopy(src, dest, size);
++	return dest;
++}
++
++int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
++{
++	return memcmp(m1, m2, size);
++}
++
++int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
++{
++	return strncmp(s1, s2, size);
++}
++
++int DWC_STRCMP(void *s1, void *s2)
++{
++	return strcmp(s1, s2);
++}
++
++int DWC_STRLEN(char const *str)
++{
++	return strlen(str);
++}
++
++char *DWC_STRCPY(char *to, char const *from)
++{
++	return strcpy(to, from);
++}
++
++char *DWC_STRDUP(char const *str)
++{
++	int len = DWC_STRLEN(str) + 1;
++	char *new = DWC_ALLOC_ATOMIC(len);
++
++	if (!new) {
++		return NULL;
++	}
++
++	DWC_MEMCPY(new, str, len);
++	return new;
++}
++
++int DWC_ATOI(char *str, int32_t *value)
++{
++	char *end = NULL;
++
++	*value = strtol(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++int DWC_ATOUI(char *str, uint32_t *value)
++{
++	char *end = NULL;
++
++	*value = strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++
++#ifdef DWC_UTFLIB
++/* From usbstring.c */
++
++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++#endif	/* DWC_UTFLIB */
++
++
++/* dwc_debug.h */
++
++dwc_bool_t DWC_IN_IRQ(void)
++{
++//	return in_irq();
++	return 0;
++}
++
++dwc_bool_t DWC_IN_BH(void)
++{
++//	return in_softirq();
++	return 0;
++}
++
++void DWC_VPRINTF(char *format, va_list args)
++{
++	vprintf(format, args);
++}
++
++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
++{
++	return vsnprintf(str, size, format, args);
++}
++
++void DWC_PRINTF(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++int DWC_SPRINTF(char *buffer, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsprintf(buffer, format, args);
++	va_end(args);
++	return retval;
++}
++
++int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsnprintf(buffer, size, format, args);
++	va_end(args);
++	return retval;
++}
++
++void __DWC_WARN(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void __DWC_ERROR(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void DWC_EXCEPTION(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++//	BUG_ON(1);	???
++}
++
++#ifdef DEBUG
++void __DWC_DEBUG(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++#endif
++
++
++/* dwc_mem.h */
++
++#if 0
++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
++				uint32_t align,
++				uint32_t alloc)
++{
++	struct dma_pool *pool = dma_pool_create("Pool", NULL,
++						size, align, alloc);
++	return (dwc_pool_t *)pool;
++}
++
++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
++{
++	dma_pool_destroy((struct dma_pool *)pool);
++}
++
++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++//	return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
++	return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr);
++}
++
++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
++	memset(..);
++}
++
++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
++{
++	dma_pool_free(pool, vaddr, daddr);
++}
++#endif
++
++static void dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
++{
++	if (error)
++		return;
++	*(bus_addr_t *)arg = segs[0].ds_addr;
++}
++
++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++	int error;
++
++	error = bus_dma_tag_create(
++#if __FreeBSD_version >= 700000
++			bus_get_dma_tag(dma->dev),	/* parent */
++#else
++			NULL,				/* parent */
++#endif
++			4, 0,				/* alignment, bounds */
++			BUS_SPACE_MAXADDR_32BIT,	/* lowaddr */
++			BUS_SPACE_MAXADDR,		/* highaddr */
++			NULL, NULL,			/* filter, filterarg */
++			size,				/* maxsize */
++			1,				/* nsegments */
++			size,				/* maxsegsize */
++			0,				/* flags */
++			NULL,				/* lockfunc */
++			NULL,				/* lockarg */
++			&dma->dma_tag);
++	if (error) {
++		device_printf(dma->dev, "%s: bus_dma_tag_create failed: %d\n",
++			      __func__, error);
++		goto fail_0;
++	}
++
++	error = bus_dmamem_alloc(dma->dma_tag, &dma->dma_vaddr,
++				 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map);
++	if (error) {
++		device_printf(dma->dev, "%s: bus_dmamem_alloc(%ju) failed: %d\n",
++			      __func__, (uintmax_t)size, error);
++		goto fail_1;
++	}
++
++	dma->dma_paddr = 0;
++	error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, size,
++				dmamap_cb, &dma->dma_paddr, BUS_DMA_NOWAIT);
++	if (error || dma->dma_paddr == 0) {
++		device_printf(dma->dev, "%s: bus_dmamap_load failed: %d\n",
++			      __func__, error);
++		goto fail_2;
++	}
++
++	*dma_addr = dma->dma_paddr;
++	return dma->dma_vaddr;
++
++fail_2:
++	bus_dmamap_unload(dma->dma_tag, dma->dma_map);
++fail_1:
++	bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
++	bus_dma_tag_destroy(dma->dma_tag);
++fail_0:
++	dma->dma_map = NULL;
++	dma->dma_tag = NULL;
++
++	return NULL;
++}
++
++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++
++	if (dma->dma_tag == NULL)
++		return;
++	if (dma->dma_map != NULL) {
++		bus_dmamap_sync(dma->dma_tag, dma->dma_map,
++				BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
++		bus_dmamap_unload(dma->dma_tag, dma->dma_map);
++		bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
++		dma->dma_map = NULL;
++	}
++
++	bus_dma_tag_destroy(dma->dma_tag);
++	dma->dma_tag = NULL;
++}
++
++void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
++}
++
++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
++}
++
++void __DWC_FREE(void *mem_ctx, void *addr)
++{
++	free(addr, M_DEVBUF);
++}
++
++
++#ifdef DWC_CRYPTOLIB
++/* dwc_crypto.h */
++
++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
++{
++	get_random_bytes(buffer, length);
++}
++
++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
++{
++	struct crypto_blkcipher *tfm;
++	struct blkcipher_desc desc;
++	struct scatterlist sgd;
++	struct scatterlist sgs;
++
++	tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
++	if (tfm == NULL) {
++		printk("failed to load transform for aes CBC\n");
++		return -1;
++	}
++
++	crypto_blkcipher_setkey(tfm, key, keylen);
++	crypto_blkcipher_set_iv(tfm, iv, 16);
++
++	sg_init_one(&sgd, out, messagelen);
++	sg_init_one(&sgs, message, messagelen);
++
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
++		crypto_free_blkcipher(tfm);
++		DWC_ERROR("AES CBC encryption failed");
++		return -1;
++	}
++
++	crypto_free_blkcipher(tfm);
++	return 0;
++}
++
++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, len);
++	crypto_hash_digest(&desc, &sg, len, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
++		    uint8_t *key, uint32_t keylen, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, messagelen);
++	crypto_hash_setkey(tfm, key, keylen);
++	crypto_hash_digest(&desc, &sg, messagelen, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++#endif	/* DWC_CRYPTOLIB */
++
++
++/* Byte Ordering Conversions */
++
++uint32_t DWC_CPU_TO_LE32(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_CPU_TO_BE32(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_LE32_TO_CPU(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_BE32_TO_CPU(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint16_t DWC_CPU_TO_LE16(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_CPU_TO_BE16(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_LE16_TO_CPU(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_BE16_TO_CPU(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++
++/* Registers */
++
++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_4(io->iot, io->ioh, ior);
++}
++
++#if 0
++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_8(io->iot, io->ioh, ior);
++}
++#endif
++
++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior, value);
++}
++
++#if 0
++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior, value);
++}
++#endif
++
++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask,
++		      uint32_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior,
++			  (bus_space_read_4(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++
++#if 0
++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask,
++		      uint64_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior,
++			  (bus_space_read_8(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++#endif
++
++
++/* Locking */
++
++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
++{
++	struct mtx *sl = DWC_ALLOC(sizeof(*sl));
++
++	if (!sl) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		return NULL;
++	}
++
++	mtx_init(sl, "dw3spn", NULL, MTX_SPIN);
++	return (dwc_spinlock_t *)sl;
++}
++
++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
++{
++	struct mtx *sl = (struct mtx *)lock;
++
++	mtx_destroy(sl);
++	DWC_FREE(sl);
++}
++
++void DWC_SPINLOCK(dwc_spinlock_t *lock)
++{
++	mtx_lock_spin((struct mtx *)lock);	// ???
++}
++
++void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
++{
++	mtx_unlock_spin((struct mtx *)lock);	// ???
++}
++
++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
++{
++	mtx_lock_spin((struct mtx *)lock);
++}
++
++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
++{
++	mtx_unlock_spin((struct mtx *)lock);
++}
++
++dwc_mutex_t *DWC_MUTEX_ALLOC(void)
++{
++	struct mtx *m;
++	dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mtx));
++
++	if (!mutex) {
++		DWC_ERROR("Cannot allocate memory for mutex");
++		return NULL;
++	}
++
++	m = (struct mtx *)mutex;
++	mtx_init(m, "dw3mtx", NULL, MTX_DEF);
++	return mutex;
++}
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++#else
++void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
++{
++	mtx_destroy((struct mtx *)mutex);
++	DWC_FREE(mutex);
++}
++#endif
++
++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
++{
++	struct mtx *m = (struct mtx *)mutex;
++
++	mtx_lock(m);
++}
++
++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
++{
++	struct mtx *m = (struct mtx *)mutex;
++
++	return mtx_trylock(m);
++}
++
++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
++{
++	struct mtx *m = (struct mtx *)mutex;
++
++	mtx_unlock(m);
++}
++
++
++/* Timing */
++
++void DWC_UDELAY(uint32_t usecs)
++{
++	DELAY(usecs);
++}
++
++void DWC_MDELAY(uint32_t msecs)
++{
++	do {
++		DELAY(1000);
++	} while (--msecs);
++}
++
++void DWC_MSLEEP(uint32_t msecs)
++{
++	struct timeval tv;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++	pause("dw3slp", tvtohz(&tv));
++}
++
++uint32_t DWC_TIME(void)
++{
++	struct timeval tv;
++
++	microuptime(&tv);	// or getmicrouptime? (less precise, but faster)
++	return tv.tv_sec * 1000 + tv.tv_usec / 1000;
++}
++
++
++/* Timers */
++
++struct dwc_timer {
++	struct callout t;
++	char *name;
++	dwc_spinlock_t *lock;
++	dwc_timer_callback_t cb;
++	void *data;
++};
++
++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
++{
++	dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (!t) {
++		DWC_ERROR("Cannot allocate memory for timer");
++		return NULL;
++	}
++
++	callout_init(&t->t, 1);
++
++	t->name = DWC_STRDUP(name);
++	if (!t->name) {
++		DWC_ERROR("Cannot allocate memory for timer->name");
++		goto no_name;
++	}
++
++	t->lock = DWC_SPINLOCK_ALLOC();
++	if (!t->lock) {
++		DWC_ERROR("Cannot allocate memory for lock");
++		goto no_lock;
++	}
++
++	t->cb = cb;
++	t->data = data;
++
++	return t;
++
++ no_lock:
++	DWC_FREE(t->name);
++ no_name:
++	DWC_FREE(t);
++
++	return NULL;
++}
++
++void DWC_TIMER_FREE(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++	DWC_SPINLOCK_FREE(timer->lock);
++	DWC_FREE(timer->name);
++	DWC_FREE(timer);
++}
++
++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
++{
++	struct timeval tv;
++
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data);
++}
++
++void DWC_TIMER_CANCEL(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++}
++
++
++/* Wait Queues */
++
++struct dwc_waitq {
++	struct mtx lock;
++	int abort;
++};
++
++dwc_waitq_t *DWC_WAITQ_ALLOC(void)
++{
++	dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		return NULL;
++	}
++
++	mtx_init(&wq->lock, "dw3wtq", NULL, MTX_DEF);
++	wq->abort = 0;
++
++	return wq;
++}
++
++void DWC_WAITQ_FREE(dwc_waitq_t *wq)
++{
++	mtx_destroy(&wq->lock);
++	DWC_FREE(wq);
++}
++
++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
++{
++//	intrmask_t ipl;
++	int result = 0;
++
++	mtx_lock(&wq->lock);
++//	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++//		splx(ipl);
++		result = msleep(wq, &wq->lock, PCATCH, "dw3wat", 0); // infinite timeout
++//		ipl = splbio();
++	}
++
++	if (result == ERESTART) {	// signaled - restart
++		result = -DWC_E_RESTART;
++
++	} else if (result == EINTR) {	// signaled - interrupt
++		result = -DWC_E_ABORT;
++
++	} else if (wq->abort) {
++		result = -DWC_E_ABORT;
++
++	} else {
++		result = 0;
++	}
++
++	wq->abort = 0;
++//	splx(ipl);
++	mtx_unlock(&wq->lock);
++	return result;
++}
++
++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++			       void *data, int32_t msecs)
++{
++	struct timeval tv, tv1, tv2;
++//	intrmask_t ipl;
++	int result = 0;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++
++	mtx_lock(&wq->lock);
++//	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++//		splx(ipl);
++		getmicrouptime(&tv1);
++		result = msleep(wq, &wq->lock, PCATCH, "dw3wto", tvtohz(&tv));
++		getmicrouptime(&tv2);
++//		ipl = splbio();
++	}
++
++	if (result == 0) {			// awoken
++		if (wq->abort) {
++			result = -DWC_E_ABORT;
++		} else {
++			tv2.tv_usec -= tv1.tv_usec;
++			if (tv2.tv_usec < 0) {
++				tv2.tv_usec += 1000000;
++				tv2.tv_sec--;
++			}
++
++			tv2.tv_sec -= tv1.tv_sec;
++			result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000;
++			result = msecs - result;
++			if (result <= 0)
++				result = 1;
++		}
++	} else if (result == ERESTART) {	// signaled - restart
++		result = -DWC_E_RESTART;
++
++	} else if (result == EINTR) {		// signaled - interrupt
++		result = -DWC_E_ABORT;
++
++	} else {				// timed out
++		result = -DWC_E_TIMEOUT;
++	}
++
++	wq->abort = 0;
++//	splx(ipl);
++	mtx_unlock(&wq->lock);
++	return result;
++}
++
++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
++{
++	wakeup(wq);
++}
++
++void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
++{
++//	intrmask_t ipl;
++
++	mtx_lock(&wq->lock);
++//	ipl = splbio();
++	wq->abort = 1;
++	wakeup(wq);
++//	splx(ipl);
++	mtx_unlock(&wq->lock);
++}
++
++
++/* Threading */
++
++struct dwc_thread {
++	struct proc *proc;
++	int abort;
++};
++
++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
++{
++	int retval;
++	dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread));
++
++	if (!thread) {
++		return NULL;
++	}
++
++	thread->abort = 0;
++	retval = kthread_create((void (*)(void *))func, data, &thread->proc,
++				RFPROC | RFNOWAIT, 0, "%s", name);
++	if (retval) {
++		DWC_FREE(thread);
++		return NULL;
++	}
++
++	return thread;
++}
++
++int DWC_THREAD_STOP(dwc_thread_t *thread)
++{
++	int retval;
++
++	thread->abort = 1;
++	retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz);
++
++	if (retval == 0) {
++		/* DWC_THREAD_EXIT() will free the thread struct */
++		return 0;
++	}
++
++	/* NOTE: We leak the thread struct if thread doesn't die */
++
++	if (retval == EWOULDBLOCK) {
++		return -DWC_E_TIMEOUT;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread)
++{
++	return thread->abort;
++}
++
++void DWC_THREAD_EXIT(dwc_thread_t *thread)
++{
++	wakeup(&thread->abort);
++	DWC_FREE(thread);
++	kthread_exit(0);
++}
++
++
++/* tasklets
++ - Runs in interrupt context (cannot sleep)
++ - Each tasklet runs on a single CPU [ How can we ensure this on FreeBSD? Does it matter? ]
++ - Different tasklets can be running simultaneously on different CPUs [ shouldn't matter ]
++ */
++struct dwc_tasklet {
++	struct task t;
++	dwc_tasklet_callback_t cb;
++	void *data;
++};
++
++static void tasklet_callback(void *data, int pending)	// what to do with pending ???
++{
++	dwc_tasklet_t *task = (dwc_tasklet_t *)data;
++
++	task->cb(task->data);
++}
++
++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
++{
++	dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task));
++
++	if (task) {
++		task->cb = cb;
++		task->data = data;
++		TASK_INIT(&task->t, 0, tasklet_callback, task);
++	} else {
++		DWC_ERROR("Cannot allocate memory for tasklet");
++	}
++
++	return task;
++}
++
++void DWC_TASK_FREE(dwc_tasklet_t *task)
++{
++	taskqueue_drain(taskqueue_fast, &task->t);	// ???
++	DWC_FREE(task);
++}
++
++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
++{
++	/* Uses predefined system queue */
++	taskqueue_enqueue_fast(taskqueue_fast, &task->t);
++}
++
++
++/* workqueues
++ - Runs in process context (can sleep)
++ */
++typedef struct work_container {
++	dwc_work_callback_t cb;
++	void *data;
++	dwc_workq_t *wq;
++	char *name;
++	int hz;
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_ENTRY(work_container) entry;
++#endif
++	struct task task;
++} work_container_t;
++
++#ifdef DEBUG
++DWC_CIRCLEQ_HEAD(work_container_queue, work_container);
++#endif
++
++struct dwc_workq {
++	struct taskqueue *taskq;
++	dwc_spinlock_t *lock;
++	dwc_waitq_t *waitq;
++	int pending;
++
++#ifdef DEBUG
++	struct work_container_queue entries;
++#endif
++};
++
++static void do_work(void *data, int pending)	// what to do with pending ???
++{
++	work_container_t *container = (work_container_t *)data;
++	dwc_workq_t *wq = container->wq;
++	dwc_irqflags_t flags;
++
++	if (container->hz) {
++		pause("dw3wrk", container->hz);
++	}
++
++	container->cb(container->data);
++	DWC_DEBUG("Work done: %s, container=%p", container->name, container);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry);
++#endif
++	if (container->name)
++		DWC_FREE(container->name);
++	DWC_FREE(container);
++	wq->pending--;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++}
++
++static int work_done(void *data)
++{
++	dwc_workq_t *workq = (dwc_workq_t *)data;
++
++	return workq->pending == 0;
++}
++
++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
++{
++	return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
++}
++
++dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
++{
++	dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for workqueue");
++		return NULL;
++	}
++
++	wq->taskq = taskqueue_create(name, M_NOWAIT, taskqueue_thread_enqueue, &wq->taskq);
++	if (!wq->taskq) {
++		DWC_ERROR("Cannot allocate memory for taskqueue");
++		goto no_taskq;
++	}
++
++	wq->pending = 0;
++
++	wq->lock = DWC_SPINLOCK_ALLOC();
++	if (!wq->lock) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		goto no_lock;
++	}
++
++	wq->waitq = DWC_WAITQ_ALLOC();
++	if (!wq->waitq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		goto no_waitq;
++	}
++
++	taskqueue_start_threads(&wq->taskq, 1, PWAIT, "%s taskq", "dw3tsk");
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INIT(&wq->entries);
++#endif
++	return wq;
++
++ no_waitq:
++	DWC_SPINLOCK_FREE(wq->lock);
++ no_lock:
++	taskqueue_free(wq->taskq);
++ no_taskq:
++	DWC_FREE(wq);
++
++	return NULL;
++}
++
++void DWC_WORKQ_FREE(dwc_workq_t *wq)
++{
++#ifdef DEBUG
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++
++	if (wq->pending != 0) {
++		struct work_container *container;
++
++		DWC_ERROR("Destroying work queue with pending work");
++
++		DWC_CIRCLEQ_FOREACH(container, &wq->entries, entry) {
++			DWC_ERROR("Work %s still pending", container->name);
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++#endif
++	DWC_WAITQ_FREE(wq->waitq);
++	DWC_SPINLOCK_FREE(wq->lock);
++	taskqueue_free(wq->taskq);
++	DWC_FREE(wq);
++}
++
++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
++			char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	container->hz = 0;
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++
++	TASK_INIT(&container->task, 0, do_work, container);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	taskqueue_enqueue_fast(wq->taskq, &container->task);
++}
++
++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
++				void *data, uint32_t time, char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	struct timeval tv;
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	container->hz = tvtohz(&tv);
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++
++	TASK_INIT(&container->task, 0, do_work, container);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	taskqueue_enqueue_fast(wq->taskq, &container->task);
++}
++
++int DWC_WORKQ_PENDING(dwc_workq_t *wq)
++{
++	return wq->pending;
++}
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_linux.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_linux.c
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_linux.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1426 @@
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kthread.h>
++
++#ifdef DWC_CCLIB
++# include "dwc_cc.h"
++#endif
++
++#ifdef DWC_CRYPTOLIB
++# include "dwc_modpow.h"
++# include "dwc_dh.h"
++# include "dwc_crypto.h"
++#endif
++
++#ifdef DWC_NOTIFYLIB
++# include "dwc_notifier.h"
++#endif
++
++/* OS-Level Implementations */
++
++/* This is the Linux kernel implementation of the DWC platform library. */
++#include <linux/moduleparam.h>
++#include <linux/ctype.h>
++#include <linux/crypto.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/cdev.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/jiffies.h>
++#include <linux/list.h>
++#include <linux/pci.h>
++#include <linux/random.h>
++#include <linux/scatterlist.h>
++#include <linux/slab.h>
++#include <linux/stat.h>
++#include <linux/string.h>
++#include <linux/timer.h>
++#include <linux/usb.h>
++
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++# include <linux/usb/gadget.h>
++#else
++# include <linux/usb_gadget.h>
++#endif
++
++#include <asm/io.h>
++#include <asm/page.h>
++#include <asm/uaccess.h>
++#include <asm/unaligned.h>
++
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++
++/* MISC */
++
++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
++{
++	return memset(dest, byte, size);
++}
++
++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
++{
++	return memcpy(dest, src, size);
++}
++
++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
++{
++	return memmove(dest, src, size);
++}
++
++int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
++{
++	return memcmp(m1, m2, size);
++}
++
++int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
++{
++	return strncmp(s1, s2, size);
++}
++
++int DWC_STRCMP(void *s1, void *s2)
++{
++	return strcmp(s1, s2);
++}
++
++int DWC_STRLEN(char const *str)
++{
++	return strlen(str);
++}
++
++char *DWC_STRCPY(char *to, char const *from)
++{
++	return strcpy(to, from);
++}
++
++char *DWC_STRDUP(char const *str)
++{
++	int len = DWC_STRLEN(str) + 1;
++	char *new = DWC_ALLOC_ATOMIC(len);
++
++	if (!new) {
++		return NULL;
++	}
++
++	DWC_MEMCPY(new, str, len);
++	return new;
++}
++
++int DWC_ATOI(const char *str, int32_t *value)
++{
++	char *end = NULL;
++
++	*value = simple_strtol(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++int DWC_ATOUI(const char *str, uint32_t *value)
++{
++	char *end = NULL;
++
++	*value = simple_strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++
++#ifdef DWC_UTFLIB
++/* From usbstring.c */
++
++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++#endif	/* DWC_UTFLIB */
++
++
++/* dwc_debug.h */
++
++dwc_bool_t DWC_IN_IRQ(void)
++{
++	return in_irq();
++}
++
++dwc_bool_t DWC_IN_BH(void)
++{
++	return in_softirq();
++}
++
++void DWC_VPRINTF(char *format, va_list args)
++{
++	vprintk(format, args);
++}
++
++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
++{
++	return vsnprintf(str, size, format, args);
++}
++
++void DWC_PRINTF(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++int DWC_SPRINTF(char *buffer, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsprintf(buffer, format, args);
++	va_end(args);
++	return retval;
++}
++
++int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsnprintf(buffer, size, format, args);
++	va_end(args);
++	return retval;
++}
++
++void __DWC_WARN(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_WARNING);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void __DWC_ERROR(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_ERR);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void DWC_EXCEPTION(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_ERR);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++	BUG_ON(1);
++}
++
++#ifdef DEBUG
++void __DWC_DEBUG(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_DEBUG);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++#endif
++
++
++/* dwc_mem.h */
++
++#if 0
++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
++				uint32_t align,
++				uint32_t alloc)
++{
++	struct dma_pool *pool = dma_pool_create("Pool", NULL,
++						size, align, alloc);
++	return (dwc_pool_t *)pool;
++}
++
++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
++{
++	dma_pool_destroy((struct dma_pool *)pool);
++}
++
++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
++}
++
++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
++	memset(..);
++}
++
++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
++{
++	dma_pool_free(pool, vaddr, daddr);
++}
++#endif
++
++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++#ifdef xxCOSIM /* Only works for 32-bit cosim */
++	void *buf = dma_alloc_coherent(dma_ctx, (size_t)size, dma_addr, GFP_KERNEL);
++#else
++	void *buf = dma_alloc_coherent(dma_ctx, (size_t)size, dma_addr, GFP_KERNEL | GFP_DMA32);
++#endif
++	if (!buf) {
++		return NULL;
++	}
++
++	memset(buf, 0, (size_t)size);
++	return buf;
++}
++
++void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++	void *buf = dma_alloc_coherent(NULL, (size_t)size, dma_addr, GFP_ATOMIC);
++	if (!buf) {
++		return NULL;
++	}
++	memset(buf, 0, (size_t)size);
++	return buf;
++}
++
++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
++{
++	dma_free_coherent(dma_ctx, size, virt_addr, dma_addr);
++}
++
++void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
++{
++	return kzalloc(size, GFP_KERNEL);
++}
++
++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
++{
++	return kzalloc(size, GFP_ATOMIC);
++}
++
++void __DWC_FREE(void *mem_ctx, void *addr)
++{
++	kfree(addr);
++}
++
++
++#ifdef DWC_CRYPTOLIB
++/* dwc_crypto.h */
++
++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
++{
++	get_random_bytes(buffer, length);
++}
++
++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
++{
++	struct crypto_blkcipher *tfm;
++	struct blkcipher_desc desc;
++	struct scatterlist sgd;
++	struct scatterlist sgs;
++
++	tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
++	if (tfm == NULL) {
++		printk("failed to load transform for aes CBC\n");
++		return -1;
++	}
++
++	crypto_blkcipher_setkey(tfm, key, keylen);
++	crypto_blkcipher_set_iv(tfm, iv, 16);
++
++	sg_init_one(&sgd, out, messagelen);
++	sg_init_one(&sgs, message, messagelen);
++
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
++		crypto_free_blkcipher(tfm);
++		DWC_ERROR("AES CBC encryption failed");
++		return -1;
++	}
++
++	crypto_free_blkcipher(tfm);
++	return 0;
++}
++
++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for sha256: %ld\n", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, len);
++	crypto_hash_digest(&desc, &sg, len, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
++		    uint8_t *key, uint32_t keylen, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for hmac(sha256): %ld\n", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, messagelen);
++	crypto_hash_setkey(tfm, key, keylen);
++	crypto_hash_digest(&desc, &sg, messagelen, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++#endif	/* DWC_CRYPTOLIB */
++
++
++/* Byte Ordering Conversions */
++
++uint32_t DWC_CPU_TO_LE32(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_CPU_TO_BE32(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_LE32_TO_CPU(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_BE32_TO_CPU(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint16_t DWC_CPU_TO_LE16(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_CPU_TO_BE16(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_LE16_TO_CPU(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_BE16_TO_CPU(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++
++/* Registers */
++
++uint32_t DWC_READ_REG32(uint32_t volatile *reg)
++{
++	return readl(reg);
++}
++
++#if 0
++uint64_t DWC_READ_REG64(uint64_t volatile *reg)
++{
++}
++#endif
++
++void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value)
++{
++	writel(value, reg);
++}
++
++#if 0
++void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value)
++{
++}
++#endif
++
++void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask)
++{
++	writel((readl(reg) & ~clear_mask) | set_mask, reg);
++}
++
++#if 0
++void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask)
++{
++}
++#endif
++
++
++/* Locking */
++
++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
++{
++	spinlock_t *sl = (spinlock_t *)1;
++
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	sl = DWC_ALLOC(sizeof(*sl));
++	if (!sl) {
++		DWC_ERROR("Cannot allocate memory for spinlock\n");
++		return NULL;
++	}
++
++	spin_lock_init(sl);
++#endif
++	return (dwc_spinlock_t *)sl;
++}
++
++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	DWC_FREE(lock);
++#endif
++}
++
++void DWC_SPINLOCK(dwc_spinlock_t *lock)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_lock((spinlock_t *)lock);
++#endif
++}
++
++void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_unlock((spinlock_t *)lock);
++#endif
++}
++
++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
++{
++	dwc_irqflags_t f;
++
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_lock_irqsave((spinlock_t *)lock, f);
++#else
++	local_irq_save(f);
++#endif
++	*flags = f;
++}
++
++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_unlock_irqrestore((spinlock_t *)lock, flags);
++#else
++	local_irq_restore(flags);
++#endif
++}
++
++dwc_mutex_t *DWC_MUTEX_ALLOC(void)
++{
++	struct mutex *m;
++	dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex));
++
++	if (!mutex) {
++		DWC_ERROR("Cannot allocate memory for mutex\n");
++		return NULL;
++	}
++
++	m = (struct mutex *)mutex;
++	mutex_init(m);
++	return mutex;
++}
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++#else
++void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
++{
++	mutex_destroy((struct mutex *)mutex);
++	DWC_FREE(mutex);
++}
++#endif
++
++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
++{
++	struct mutex *m = (struct mutex *)mutex;
++	mutex_lock(m);
++}
++
++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
++{
++	struct mutex *m = (struct mutex *)mutex;
++	return mutex_trylock(m);
++}
++
++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
++{
++	struct mutex *m = (struct mutex *)mutex;
++	mutex_unlock(m);
++}
++
++
++/* Timing */
++
++void DWC_UDELAY(uint32_t usecs)
++{
++	udelay(usecs);
++}
++
++void DWC_MDELAY(uint32_t msecs)
++{
++	mdelay(msecs);
++}
++
++void DWC_MSLEEP(uint32_t msecs)
++{
++	msleep(msecs);
++}
++
++uint32_t DWC_TIME(void)
++{
++	return jiffies_to_msecs(jiffies);
++}
++
++
++/* Timers */
++
++struct dwc_timer {
++	struct timer_list *t;
++	char *name;
++	dwc_timer_callback_t cb;
++	void *data;
++	uint8_t scheduled;
++	dwc_spinlock_t *lock;
++};
++
++static void timer_callback(unsigned long data)
++{
++	dwc_timer_t *timer = (dwc_timer_t *)data;
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
++	timer->scheduled = 0;
++	DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
++	DWC_DEBUGC("Timer %s callback", timer->name);
++	timer->cb(timer->data);
++}
++
++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
++{
++	dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (!t) {
++		DWC_ERROR("Cannot allocate memory for timer");
++		return NULL;
++	}
++
++	t->t = DWC_ALLOC(sizeof(*t->t));
++	if (!t->t) {
++		DWC_ERROR("Cannot allocate memory for timer->t");
++		goto no_timer;
++	}
++
++	t->name = DWC_STRDUP(name);
++	if (!t->name) {
++		DWC_ERROR("Cannot allocate memory for timer->name");
++		goto no_name;
++	}
++
++	t->lock = DWC_SPINLOCK_ALLOC();
++	if (!t->lock) {
++		DWC_ERROR("Cannot allocate memory for lock");
++		goto no_lock;
++	}
++
++	t->scheduled = 0;
++	t->t->base = &boot_tvec_bases;
++	t->t->expires = jiffies;
++	setup_timer(t->t, timer_callback, (unsigned long)t);
++
++	t->cb = cb;
++	t->data = data;
++
++	return t;
++
++ no_lock:
++	DWC_FREE(t->name);
++ no_name:
++	DWC_FREE(t->t);
++ no_timer:
++	DWC_FREE(t);
++	return NULL;
++}
++
++void DWC_TIMER_FREE(dwc_timer_t *timer)
++{
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
++
++	if (timer->scheduled) {
++		del_timer(timer->t);
++		timer->scheduled = 0;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
++	DWC_SPINLOCK_FREE(timer->lock);
++	DWC_FREE(timer->t);
++	DWC_FREE(timer->name);
++	DWC_FREE(timer);
++}
++
++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
++{
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
++
++	if (!timer->scheduled) {
++		timer->scheduled = 1;
++		DWC_DEBUGC("Scheduling timer %s to expire in +%d msec", timer->name, time);
++		timer->t->expires = jiffies + msecs_to_jiffies(time);
++		add_timer(timer->t);
++	} else {
++		DWC_DEBUGC("Modifying timer %s to expire in +%d msec", timer->name, time);
++		mod_timer(timer->t, jiffies + msecs_to_jiffies(time));
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
++}
++
++void DWC_TIMER_CANCEL(dwc_timer_t *timer)
++{
++	del_timer(timer->t);
++}
++
++
++/* Wait Queues */
++
++struct dwc_waitq {
++	wait_queue_head_t queue;
++	int abort;
++};
++
++dwc_waitq_t *DWC_WAITQ_ALLOC(void)
++{
++	dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue\n");
++		return NULL;
++	}
++
++	init_waitqueue_head(&wq->queue);
++	wq->abort = 0;
++	return wq;
++}
++
++void DWC_WAITQ_FREE(dwc_waitq_t *wq)
++{
++	DWC_FREE(wq);
++}
++
++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
++{
++	int result = wait_event_interruptible(wq->queue,
++					      cond(data) || wq->abort);
++	if (result == -ERESTARTSYS) {
++		wq->abort = 0;
++		return -DWC_E_RESTART;
++	}
++
++	if (wq->abort == 1) {
++		wq->abort = 0;
++		return -DWC_E_ABORT;
++	}
++
++	wq->abort = 0;
++
++	if (result == 0) {
++		return 0;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++			       void *data, int32_t msecs)
++{
++	int32_t tmsecs;
++	int result = wait_event_interruptible_timeout(wq->queue,
++						      cond(data) || wq->abort,
++						      msecs_to_jiffies(msecs));
++	if (result == -ERESTARTSYS) {
++		wq->abort = 0;
++		return -DWC_E_RESTART;
++	}
++
++	if (wq->abort == 1) {
++		wq->abort = 0;
++		return -DWC_E_ABORT;
++	}
++
++	wq->abort = 0;
++
++	if (result > 0) {
++		tmsecs = jiffies_to_msecs(result);
++		if (!tmsecs) {
++			return 1;
++		}
++
++		return tmsecs;
++	}
++
++	if (result == 0) {
++		return -DWC_E_TIMEOUT;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
++{
++	wq->abort = 0;
++	wake_up_interruptible(&wq->queue);
++}
++
++void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
++{
++	wq->abort = 1;
++	wake_up_interruptible(&wq->queue);
++}
++
++
++/* Threading */
++
++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
++{
++	struct task_struct *thread = kthread_run(func, data, name);
++
++	if (thread == ERR_PTR(-ENOMEM)) {
++		return NULL;
++	}
++
++	return (dwc_thread_t *)thread;
++}
++
++int DWC_THREAD_STOP(dwc_thread_t *thread)
++{
++	return kthread_stop((struct task_struct *)thread);
++}
++
++dwc_bool_t DWC_THREAD_SHOULD_STOP(void)
++{
++	return kthread_should_stop();
++}
++
++
++/* tasklets
++ - run in interrupt context (cannot sleep)
++ - each tasklet runs on a single CPU
++ - different tasklets can be running simultaneously on different CPUs
++ */
++struct dwc_tasklet {
++	struct tasklet_struct t;
++	dwc_tasklet_callback_t cb;
++	void *data;
++};
++
++static void tasklet_callback(unsigned long data)
++{
++	dwc_tasklet_t *t = (dwc_tasklet_t *)data;
++	t->cb(t->data);
++}
++
++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
++{
++	dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (t) {
++		t->cb = cb;
++		t->data = data;
++		tasklet_init(&t->t, tasklet_callback, (unsigned long)t);
++	} else {
++		DWC_ERROR("Cannot allocate memory for tasklet\n");
++	}
++
++	return t;
++}
++
++void DWC_TASK_FREE(dwc_tasklet_t *task)
++{
++	DWC_FREE(task);
++}
++
++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
++{
++	tasklet_schedule(&task->t);
++}
++
++void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task)
++{
++	tasklet_hi_schedule(&task->t);
++}
++
++
++/* workqueues
++ - run in process context (can sleep)
++ */
++typedef struct work_container {
++	dwc_work_callback_t cb;
++	void *data;
++	dwc_workq_t *wq;
++	char *name;
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_ENTRY(work_container) entry;
++#endif
++	struct delayed_work work;
++} work_container_t;
++
++#ifdef DEBUG
++DWC_CIRCLEQ_HEAD(work_container_queue, work_container);
++#endif
++
++struct dwc_workq {
++	struct workqueue_struct *wq;
++	dwc_spinlock_t *lock;
++	dwc_waitq_t *waitq;
++	int pending;
++
++#ifdef DEBUG
++	struct work_container_queue entries;
++#endif
++};
++
++static void do_work(struct work_struct *work)
++{
++	dwc_irqflags_t flags;
++	struct delayed_work *dw = container_of(work, struct delayed_work, work);
++	work_container_t *container = container_of(dw, struct work_container, work);
++	dwc_workq_t *wq = container->wq;
++
++	container->cb(container->data);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry);
++#endif
++	DWC_DEBUGC("Work done: %s, container=%p", container->name, container);
++	if (container->name) {
++		DWC_FREE(container->name);
++	}
++	DWC_FREE(container);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending--;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++}
++
++static int work_done(void *data)
++{
++	dwc_workq_t *workq = (dwc_workq_t *)data;
++	return workq->pending == 0;
++}
++
++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
++{
++	return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
++}
++
++dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
++{
++	dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		return NULL;
++	}
++
++	wq->wq = create_singlethread_workqueue(name);
++	if (!wq->wq) {
++		goto no_wq;
++	}
++
++	wq->pending = 0;
++
++	wq->lock = DWC_SPINLOCK_ALLOC();
++	if (!wq->lock) {
++		goto no_lock;
++	}
++
++	wq->waitq = DWC_WAITQ_ALLOC();
++	if (!wq->waitq) {
++		goto no_waitq;
++	}
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INIT(&wq->entries);
++#endif
++	return wq;
++
++ no_waitq:
++	DWC_SPINLOCK_FREE(wq->lock);
++ no_lock:
++	destroy_workqueue(wq->wq);
++ no_wq:
++	DWC_FREE(wq);
++
++	return NULL;
++}
++
++void DWC_WORKQ_FREE(dwc_workq_t *wq)
++{
++#ifdef DEBUG
++	if (wq->pending != 0) {
++		struct work_container *wc;
++		DWC_ERROR("Destroying work queue with pending work");
++		DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) {
++			DWC_ERROR("Work %s still pending", wc->name);
++		}
++	}
++#endif
++	destroy_workqueue(wq->wq);
++	DWC_SPINLOCK_FREE(wq->lock);
++	DWC_WAITQ_FREE(wq->waitq);
++	DWC_FREE(wq);
++}
++
++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
++			char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container\n");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name\n");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container);
++	INIT_WORK(&container->work.work, do_work);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	queue_work(wq->wq, &container->work.work);
++}
++
++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
++				void *data, uint32_t time, char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container\n");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name\n");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container);
++	INIT_DELAYED_WORK(&container->work, do_work);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time));
++}
++
++int DWC_WORKQ_PENDING(dwc_workq_t *wq)
++{
++	return wq->pending;
++}
++
++
++#ifdef DWC_LIBMODULE
++
++#ifdef DWC_CCLIB
++/* CC */
++EXPORT_SYMBOL(dwc_cc_if_alloc);
++EXPORT_SYMBOL(dwc_cc_if_free);
++EXPORT_SYMBOL(dwc_cc_clear);
++EXPORT_SYMBOL(dwc_cc_add);
++EXPORT_SYMBOL(dwc_cc_remove);
++EXPORT_SYMBOL(dwc_cc_change);
++EXPORT_SYMBOL(dwc_cc_data_for_save);
++EXPORT_SYMBOL(dwc_cc_restore_from_data);
++EXPORT_SYMBOL(dwc_cc_match_chid);
++EXPORT_SYMBOL(dwc_cc_match_cdid);
++EXPORT_SYMBOL(dwc_cc_ck);
++EXPORT_SYMBOL(dwc_cc_chid);
++EXPORT_SYMBOL(dwc_cc_cdid);
++EXPORT_SYMBOL(dwc_cc_name);
++#endif	/* DWC_CCLIB */
++
++#ifdef DWC_CRYPTOLIB
++# ifndef CONFIG_MACH_IPMATE
++/* Modpow */
++EXPORT_SYMBOL(dwc_modpow);
++
++/* DH */
++EXPORT_SYMBOL(dwc_dh_modpow);
++EXPORT_SYMBOL(dwc_dh_derive_keys);
++EXPORT_SYMBOL(dwc_dh_pk);
++# endif	/* CONFIG_MACH_IPMATE */
++
++/* Crypto */
++EXPORT_SYMBOL(dwc_wusb_aes_encrypt);
++EXPORT_SYMBOL(dwc_wusb_cmf);
++EXPORT_SYMBOL(dwc_wusb_prf);
++EXPORT_SYMBOL(dwc_wusb_fill_ccm_nonce);
++EXPORT_SYMBOL(dwc_wusb_gen_nonce);
++EXPORT_SYMBOL(dwc_wusb_gen_key);
++EXPORT_SYMBOL(dwc_wusb_gen_mic);
++#endif	/* DWC_CRYPTOLIB */
++
++/* Notification */
++#ifdef DWC_NOTIFYLIB
++EXPORT_SYMBOL(dwc_alloc_notification_manager);
++EXPORT_SYMBOL(dwc_free_notification_manager);
++EXPORT_SYMBOL(dwc_register_notifier);
++EXPORT_SYMBOL(dwc_unregister_notifier);
++EXPORT_SYMBOL(dwc_add_observer);
++EXPORT_SYMBOL(dwc_remove_observer);
++EXPORT_SYMBOL(dwc_notify);
++#endif
++
++/* Memory Debugging Routines */
++#ifdef DWC_DEBUG_MEMORY
++EXPORT_SYMBOL(dwc_alloc_debug);
++EXPORT_SYMBOL(dwc_alloc_atomic_debug);
++EXPORT_SYMBOL(dwc_free_debug);
++EXPORT_SYMBOL(dwc_dma_alloc_debug);
++EXPORT_SYMBOL(dwc_dma_free_debug);
++#endif
++
++EXPORT_SYMBOL(DWC_MEMSET);
++EXPORT_SYMBOL(DWC_MEMCPY);
++EXPORT_SYMBOL(DWC_MEMMOVE);
++EXPORT_SYMBOL(DWC_MEMCMP);
++EXPORT_SYMBOL(DWC_STRNCMP);
++EXPORT_SYMBOL(DWC_STRCMP);
++EXPORT_SYMBOL(DWC_STRLEN);
++EXPORT_SYMBOL(DWC_STRCPY);
++EXPORT_SYMBOL(DWC_STRDUP);
++EXPORT_SYMBOL(DWC_ATOI);
++EXPORT_SYMBOL(DWC_ATOUI);
++
++#ifdef DWC_UTFLIB
++EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE);
++#endif	/* DWC_UTFLIB */
++
++EXPORT_SYMBOL(DWC_IN_IRQ);
++EXPORT_SYMBOL(DWC_IN_BH);
++EXPORT_SYMBOL(DWC_VPRINTF);
++EXPORT_SYMBOL(DWC_VSNPRINTF);
++EXPORT_SYMBOL(DWC_PRINTF);
++EXPORT_SYMBOL(DWC_SPRINTF);
++EXPORT_SYMBOL(DWC_SNPRINTF);
++EXPORT_SYMBOL(__DWC_WARN);
++EXPORT_SYMBOL(__DWC_ERROR);
++EXPORT_SYMBOL(DWC_EXCEPTION);
++
++#ifdef DEBUG
++EXPORT_SYMBOL(__DWC_DEBUG);
++#endif
++
++EXPORT_SYMBOL(__DWC_DMA_ALLOC);
++EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC);
++EXPORT_SYMBOL(__DWC_DMA_FREE);
++EXPORT_SYMBOL(__DWC_ALLOC);
++EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC);
++EXPORT_SYMBOL(__DWC_FREE);
++
++#ifdef DWC_CRYPTOLIB
++EXPORT_SYMBOL(DWC_RANDOM_BYTES);
++EXPORT_SYMBOL(DWC_AES_CBC);
++EXPORT_SYMBOL(DWC_SHA256);
++EXPORT_SYMBOL(DWC_HMAC_SHA256);
++#endif
++
++EXPORT_SYMBOL(DWC_CPU_TO_LE32);
++EXPORT_SYMBOL(DWC_CPU_TO_BE32);
++EXPORT_SYMBOL(DWC_LE32_TO_CPU);
++EXPORT_SYMBOL(DWC_BE32_TO_CPU);
++EXPORT_SYMBOL(DWC_CPU_TO_LE16);
++EXPORT_SYMBOL(DWC_CPU_TO_BE16);
++EXPORT_SYMBOL(DWC_LE16_TO_CPU);
++EXPORT_SYMBOL(DWC_BE16_TO_CPU);
++EXPORT_SYMBOL(DWC_READ_REG32);
++EXPORT_SYMBOL(DWC_WRITE_REG32);
++EXPORT_SYMBOL(DWC_MODIFY_REG32);
++
++#if 0
++EXPORT_SYMBOL(DWC_READ_REG64);
++EXPORT_SYMBOL(DWC_WRITE_REG64);
++EXPORT_SYMBOL(DWC_MODIFY_REG64);
++#endif
++
++EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC);
++EXPORT_SYMBOL(DWC_SPINLOCK_FREE);
++EXPORT_SYMBOL(DWC_SPINLOCK);
++EXPORT_SYMBOL(DWC_SPINUNLOCK);
++EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE);
++EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE);
++EXPORT_SYMBOL(DWC_MUTEX_ALLOC);
++
++#if (!defined(DWC_LINUX) || !defined(CONFIG_DEBUG_MUTEXES))
++EXPORT_SYMBOL(DWC_MUTEX_FREE);
++#endif
++
++EXPORT_SYMBOL(DWC_MUTEX_LOCK);
++EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK);
++EXPORT_SYMBOL(DWC_MUTEX_UNLOCK);
++EXPORT_SYMBOL(DWC_UDELAY);
++EXPORT_SYMBOL(DWC_MDELAY);
++EXPORT_SYMBOL(DWC_MSLEEP);
++EXPORT_SYMBOL(DWC_TIME);
++EXPORT_SYMBOL(DWC_TIMER_ALLOC);
++EXPORT_SYMBOL(DWC_TIMER_FREE);
++EXPORT_SYMBOL(DWC_TIMER_SCHEDULE);
++EXPORT_SYMBOL(DWC_TIMER_CANCEL);
++EXPORT_SYMBOL(DWC_WAITQ_ALLOC);
++EXPORT_SYMBOL(DWC_WAITQ_FREE);
++EXPORT_SYMBOL(DWC_WAITQ_WAIT);
++EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT);
++EXPORT_SYMBOL(DWC_WAITQ_TRIGGER);
++EXPORT_SYMBOL(DWC_WAITQ_ABORT);
++EXPORT_SYMBOL(DWC_THREAD_RUN);
++EXPORT_SYMBOL(DWC_THREAD_STOP);
++EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP);
++EXPORT_SYMBOL(DWC_TASK_ALLOC);
++EXPORT_SYMBOL(DWC_TASK_FREE);
++EXPORT_SYMBOL(DWC_TASK_SCHEDULE);
++EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE);
++EXPORT_SYMBOL(DWC_WORKQ_ALLOC);
++EXPORT_SYMBOL(DWC_WORKQ_FREE);
++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE);
++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED);
++EXPORT_SYMBOL(DWC_WORKQ_PENDING);
++
++static int dwc_common_port_init_module(void)
++{
++	int result = 0;
++
++	printk(KERN_DEBUG "Module dwc_common_port init\n" );
++
++#ifdef DWC_DEBUG_MEMORY
++	result = dwc_memory_debug_start(NULL);
++	if (result) {
++		printk(KERN_ERR
++		       "dwc_memory_debug_start() failed with error %d\n",
++		       result);
++		return result;
++	}
++#endif
++
++#ifdef DWC_NOTIFYLIB
++	result = dwc_alloc_notification_manager(NULL, NULL);
++	if (result) {
++		printk(KERN_ERR
++		       "dwc_alloc_notification_manager() failed with error %d\n",
++		       result);
++		return result;
++	}
++#endif
++	return result;
++}
++
++static void dwc_common_port_exit_module(void)
++{
++	printk(KERN_DEBUG "Module dwc_common_port exit\n" );
++
++#ifdef DWC_NOTIFYLIB
++	dwc_free_notification_manager();
++#endif
++
++#ifdef DWC_DEBUG_MEMORY
++	dwc_memory_debug_stop();
++#endif
++}
++
++module_init(dwc_common_port_init_module);
++module_exit(dwc_common_port_exit_module);
++
++MODULE_DESCRIPTION("DWC Common Library - Portable version");
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE ("GPL");
++
++#endif	/* DWC_LIBMODULE */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1275 @@
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++#ifdef DWC_CCLIB
++# include "dwc_cc.h"
++#endif
++
++#ifdef DWC_CRYPTOLIB
++# include "dwc_modpow.h"
++# include "dwc_dh.h"
++# include "dwc_crypto.h"
++#endif
++
++#ifdef DWC_NOTIFYLIB
++# include "dwc_notifier.h"
++#endif
++
++/* OS-Level Implementations */
++
++/* This is the NetBSD 4.0.1 kernel implementation of the DWC platform library. */
++
++
++/* MISC */
++
++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
++{
++	return memset(dest, byte, size);
++}
++
++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
++{
++	return memcpy(dest, src, size);
++}
++
++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
++{
++	bcopy(src, dest, size);
++	return dest;
++}
++
++int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
++{
++	return memcmp(m1, m2, size);
++}
++
++int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
++{
++	return strncmp(s1, s2, size);
++}
++
++int DWC_STRCMP(void *s1, void *s2)
++{
++	return strcmp(s1, s2);
++}
++
++int DWC_STRLEN(char const *str)
++{
++	return strlen(str);
++}
++
++char *DWC_STRCPY(char *to, char const *from)
++{
++	return strcpy(to, from);
++}
++
++char *DWC_STRDUP(char const *str)
++{
++	int len = DWC_STRLEN(str) + 1;
++	char *new = DWC_ALLOC_ATOMIC(len);
++
++	if (!new) {
++		return NULL;
++	}
++
++	DWC_MEMCPY(new, str, len);
++	return new;
++}
++
++int DWC_ATOI(char *str, int32_t *value)
++{
++	char *end = NULL;
++
++	/* NetBSD doesn't have 'strtol' in the kernel, but 'strtoul'
++	 * should be equivalent on 2's complement machines
++	 */
++	*value = strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++int DWC_ATOUI(char *str, uint32_t *value)
++{
++	char *end = NULL;
++
++	*value = strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++
++#ifdef DWC_UTFLIB
++/* From usbstring.c */
++
++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++#endif	/* DWC_UTFLIB */
++
++
++/* dwc_debug.h */
++
++dwc_bool_t DWC_IN_IRQ(void)
++{
++//	return in_irq();
++	return 0;
++}
++
++dwc_bool_t DWC_IN_BH(void)
++{
++//	return in_softirq();
++	return 0;
++}
++
++void DWC_VPRINTF(char *format, va_list args)
++{
++	vprintf(format, args);
++}
++
++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
++{
++	return vsnprintf(str, size, format, args);
++}
++
++void DWC_PRINTF(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++int DWC_SPRINTF(char *buffer, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsprintf(buffer, format, args);
++	va_end(args);
++	return retval;
++}
++
++int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsnprintf(buffer, size, format, args);
++	va_end(args);
++	return retval;
++}
++
++void __DWC_WARN(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void __DWC_ERROR(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void DWC_EXCEPTION(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++//	BUG_ON(1);	???
++}
++
++#ifdef DEBUG
++void __DWC_DEBUG(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++#endif
++
++
++/* dwc_mem.h */
++
++#if 0
++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
++				uint32_t align,
++				uint32_t alloc)
++{
++	struct dma_pool *pool = dma_pool_create("Pool", NULL,
++						size, align, alloc);
++	return (dwc_pool_t *)pool;
++}
++
++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
++{
++	dma_pool_destroy((struct dma_pool *)pool);
++}
++
++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++//	return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
++	return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr);
++}
++
++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
++	memset(..);
++}
++
++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
++{
++	dma_pool_free(pool, vaddr, daddr);
++}
++#endif
++
++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++	int error;
++
++	error = bus_dmamem_alloc(dma->dma_tag, size, 1, size, dma->segs,
++				 sizeof(dma->segs) / sizeof(dma->segs[0]),
++				 &dma->nsegs, BUS_DMA_NOWAIT);
++	if (error) {
++		printf("%s: bus_dmamem_alloc(%ju) failed: %d\n", __func__,
++		       (uintmax_t)size, error);
++		goto fail_0;
++	}
++
++	error = bus_dmamem_map(dma->dma_tag, dma->segs, dma->nsegs, size,
++			       (caddr_t *)&dma->dma_vaddr,
++			       BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
++	if (error) {
++		printf("%s: bus_dmamem_map failed: %d\n", __func__, error);
++		goto fail_1;
++	}
++
++	error = bus_dmamap_create(dma->dma_tag, size, 1, size, 0,
++				  BUS_DMA_NOWAIT, &dma->dma_map);
++	if (error) {
++		printf("%s: bus_dmamap_create failed: %d\n", __func__, error);
++		goto fail_2;
++	}
++
++	error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr,
++				size, NULL, BUS_DMA_NOWAIT);
++	if (error) {
++		printf("%s: bus_dmamap_load failed: %d\n", __func__, error);
++		goto fail_3;
++	}
++
++	dma->dma_paddr = (bus_addr_t)dma->segs[0].ds_addr;
++	*dma_addr = dma->dma_paddr;
++	return dma->dma_vaddr;
++
++fail_3:
++	bus_dmamap_destroy(dma->dma_tag, dma->dma_map);
++fail_2:
++	bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size);
++fail_1:
++	bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs);
++fail_0:
++	dma->dma_map = NULL;
++	dma->dma_vaddr = NULL;
++	dma->nsegs = 0;
++
++	return NULL;
++}
++
++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++
++	if (dma->dma_map != NULL) {
++		bus_dmamap_sync(dma->dma_tag, dma->dma_map, 0, size,
++				BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
++		bus_dmamap_unload(dma->dma_tag, dma->dma_map);
++		bus_dmamap_destroy(dma->dma_tag, dma->dma_map);
++		bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size);
++		bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs);
++		dma->dma_paddr = 0;
++		dma->dma_map = NULL;
++		dma->dma_vaddr = NULL;
++		dma->nsegs = 0;
++	}
++}
++
++void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
++}
++
++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
++}
++
++void __DWC_FREE(void *mem_ctx, void *addr)
++{
++	free(addr, M_DEVBUF);
++}
++
++
++#ifdef DWC_CRYPTOLIB
++/* dwc_crypto.h */
++
++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
++{
++	get_random_bytes(buffer, length);
++}
++
++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
++{
++	struct crypto_blkcipher *tfm;
++	struct blkcipher_desc desc;
++	struct scatterlist sgd;
++	struct scatterlist sgs;
++
++	tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
++	if (tfm == NULL) {
++		printk("failed to load transform for aes CBC\n");
++		return -1;
++	}
++
++	crypto_blkcipher_setkey(tfm, key, keylen);
++	crypto_blkcipher_set_iv(tfm, iv, 16);
++
++	sg_init_one(&sgd, out, messagelen);
++	sg_init_one(&sgs, message, messagelen);
++
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
++		crypto_free_blkcipher(tfm);
++		DWC_ERROR("AES CBC encryption failed");
++		return -1;
++	}
++
++	crypto_free_blkcipher(tfm);
++	return 0;
++}
++
++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, len);
++	crypto_hash_digest(&desc, &sg, len, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
++		    uint8_t *key, uint32_t keylen, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, messagelen);
++	crypto_hash_setkey(tfm, key, keylen);
++	crypto_hash_digest(&desc, &sg, messagelen, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++#endif	/* DWC_CRYPTOLIB */
++
++
++/* Byte Ordering Conversions */
++
++uint32_t DWC_CPU_TO_LE32(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_CPU_TO_BE32(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_LE32_TO_CPU(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_BE32_TO_CPU(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint16_t DWC_CPU_TO_LE16(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_CPU_TO_BE16(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_LE16_TO_CPU(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_BE16_TO_CPU(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++
++/* Registers */
++
++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_4(io->iot, io->ioh, ior);
++}
++
++#if 0
++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_8(io->iot, io->ioh, ior);
++}
++#endif
++
++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior, value);
++}
++
++#if 0
++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior, value);
++}
++#endif
++
++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask,
++		      uint32_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior,
++			  (bus_space_read_4(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++
++#if 0
++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask,
++		      uint64_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior,
++			  (bus_space_read_8(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++#endif
++
++
++/* Locking */
++
++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
++{
++	struct simplelock *sl = DWC_ALLOC(sizeof(*sl));
++
++	if (!sl) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		return NULL;
++	}
++
++	simple_lock_init(sl);
++	return (dwc_spinlock_t *)sl;
++}
++
++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
++{
++	struct simplelock *sl = (struct simplelock *)lock;
++
++	DWC_FREE(sl);
++}
++
++void DWC_SPINLOCK(dwc_spinlock_t *lock)
++{
++	simple_lock((struct simplelock *)lock);
++}
++
++void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
++{
++	simple_unlock((struct simplelock *)lock);
++}
++
++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
++{
++	simple_lock((struct simplelock *)lock);
++	*flags = splbio();
++}
++
++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
++{
++	splx(flags);
++	simple_unlock((struct simplelock *)lock);
++}
++
++dwc_mutex_t *DWC_MUTEX_ALLOC(void)
++{
++	dwc_mutex_t *mutex = DWC_ALLOC(sizeof(struct lock));
++
++	if (!mutex) {
++		DWC_ERROR("Cannot allocate memory for mutex");
++		return NULL;
++	}
++
++	lockinit((struct lock *)mutex, 0, "dw3mtx", 0, 0);
++	return mutex;
++}
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++#else
++void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
++{
++	DWC_FREE(mutex);
++}
++#endif
++
++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
++{
++	lockmgr((struct lock *)mutex, LK_EXCLUSIVE, NULL);
++}
++
++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
++{
++	int status;
++
++	status = lockmgr((struct lock *)mutex, LK_EXCLUSIVE | LK_NOWAIT, NULL);
++	return status == 0;
++}
++
++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
++{
++	lockmgr((struct lock *)mutex, LK_RELEASE, NULL);
++}
++
++
++/* Timing */
++
++void DWC_UDELAY(uint32_t usecs)
++{
++	DELAY(usecs);
++}
++
++void DWC_MDELAY(uint32_t msecs)
++{
++	do {
++		DELAY(1000);
++	} while (--msecs);
++}
++
++void DWC_MSLEEP(uint32_t msecs)
++{
++	struct timeval tv;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++	tsleep(&tv, 0, "dw3slp", tvtohz(&tv));
++}
++
++uint32_t DWC_TIME(void)
++{
++	struct timeval tv;
++
++	microuptime(&tv);	// or getmicrouptime? (less precise, but faster)
++	return tv.tv_sec * 1000 + tv.tv_usec / 1000;
++}
++
++
++/* Timers */
++
++struct dwc_timer {
++	struct callout t;
++	char *name;
++	dwc_spinlock_t *lock;
++	dwc_timer_callback_t cb;
++	void *data;
++};
++
++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
++{
++	dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (!t) {
++		DWC_ERROR("Cannot allocate memory for timer");
++		return NULL;
++	}
++
++	callout_init(&t->t);
++
++	t->name = DWC_STRDUP(name);
++	if (!t->name) {
++		DWC_ERROR("Cannot allocate memory for timer->name");
++		goto no_name;
++	}
++
++	t->lock = DWC_SPINLOCK_ALLOC();
++	if (!t->lock) {
++		DWC_ERROR("Cannot allocate memory for timer->lock");
++		goto no_lock;
++	}
++
++	t->cb = cb;
++	t->data = data;
++
++	return t;
++
++ no_lock:
++	DWC_FREE(t->name);
++ no_name:
++	DWC_FREE(t);
++
++	return NULL;
++}
++
++void DWC_TIMER_FREE(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++	DWC_SPINLOCK_FREE(timer->lock);
++	DWC_FREE(timer->name);
++	DWC_FREE(timer);
++}
++
++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
++{
++	struct timeval tv;
++
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data);
++}
++
++void DWC_TIMER_CANCEL(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++}
++
++
++/* Wait Queues */
++
++struct dwc_waitq {
++	struct simplelock lock;
++	int abort;
++};
++
++dwc_waitq_t *DWC_WAITQ_ALLOC(void)
++{
++	dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		return NULL;
++	}
++
++	simple_lock_init(&wq->lock);
++	wq->abort = 0;
++
++	return wq;
++}
++
++void DWC_WAITQ_FREE(dwc_waitq_t *wq)
++{
++	DWC_FREE(wq);
++}
++
++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
++{
++	int ipl;
++	int result = 0;
++
++	simple_lock(&wq->lock);
++	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++		splx(ipl);
++		result = ltsleep(wq, PCATCH, "dw3wat", 0, &wq->lock); // infinite timeout
++		ipl = splbio();
++	}
++
++	if (result == 0) {			// awoken
++		if (wq->abort) {
++			wq->abort = 0;
++			result = -DWC_E_ABORT;
++		} else {
++			result = 0;
++		}
++
++		splx(ipl);
++		simple_unlock(&wq->lock);
++	} else {
++		wq->abort = 0;
++		splx(ipl);
++		simple_unlock(&wq->lock);
++
++		if (result == ERESTART) {	// signaled - restart
++			result = -DWC_E_RESTART;
++		} else {			// signaled - must be EINTR
++			result = -DWC_E_ABORT;
++		}
++	}
++
++	return result;
++}
++
++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++			       void *data, int32_t msecs)
++{
++	struct timeval tv, tv1, tv2;
++	int ipl;
++	int result = 0;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++
++	simple_lock(&wq->lock);
++	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++		splx(ipl);
++		getmicrouptime(&tv1);
++		result = ltsleep(wq, PCATCH, "dw3wto", tvtohz(&tv), &wq->lock);
++		getmicrouptime(&tv2);
++		ipl = splbio();
++	}
++
++	if (result == 0) {			// awoken
++		if (wq->abort) {
++			wq->abort = 0;
++			splx(ipl);
++			simple_unlock(&wq->lock);
++			result = -DWC_E_ABORT;
++		} else {
++			splx(ipl);
++			simple_unlock(&wq->lock);
++
++			tv2.tv_usec -= tv1.tv_usec;
++			if (tv2.tv_usec < 0) {
++				tv2.tv_usec += 1000000;
++				tv2.tv_sec--;
++			}
++
++			tv2.tv_sec -= tv1.tv_sec;
++			result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000;
++			result = msecs - result;
++			if (result <= 0)
++				result = 1;
++		}
++	} else {
++		wq->abort = 0;
++		splx(ipl);
++		simple_unlock(&wq->lock);
++
++		if (result == ERESTART) {	// signaled - restart
++			result = -DWC_E_RESTART;
++
++		} else if (result == EINTR) {		// signaled - interrupt
++			result = -DWC_E_ABORT;
++
++		} else {				// timed out
++			result = -DWC_E_TIMEOUT;
++		}
++	}
++
++	return result;
++}
++
++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
++{
++	wakeup(wq);
++}
++
++void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
++{
++	int ipl;
++
++	simple_lock(&wq->lock);
++	ipl = splbio();
++	wq->abort = 1;
++	wakeup(wq);
++	splx(ipl);
++	simple_unlock(&wq->lock);
++}
++
++
++/* Threading */
++
++struct dwc_thread {
++	struct proc *proc;
++	int abort;
++};
++
++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
++{
++	int retval;
++	dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread));
++
++	if (!thread) {
++		return NULL;
++	}
++
++	thread->abort = 0;
++	retval = kthread_create1((void (*)(void *))func, data, &thread->proc,
++				 "%s", name);
++	if (retval) {
++		DWC_FREE(thread);
++		return NULL;
++	}
++
++	return thread;
++}
++
++int DWC_THREAD_STOP(dwc_thread_t *thread)
++{
++	int retval;
++
++	thread->abort = 1;
++	retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz);
++
++	if (retval == 0) {
++		/* DWC_THREAD_EXIT() will free the thread struct */
++		return 0;
++	}
++
++	/* NOTE: We leak the thread struct if thread doesn't die */
++
++	if (retval == EWOULDBLOCK) {
++		return -DWC_E_TIMEOUT;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread)
++{
++	return thread->abort;
++}
++
++void DWC_THREAD_EXIT(dwc_thread_t *thread)
++{
++	wakeup(&thread->abort);
++	DWC_FREE(thread);
++	kthread_exit(0);
++}
++
++/* tasklets
++ - Runs in interrupt context (cannot sleep)
++ - Each tasklet runs on a single CPU
++ - Different tasklets can be running simultaneously on different CPUs
++ [ On NetBSD there is no corresponding mechanism, drivers don't have bottom-
++   halves. So we just call the callback directly from DWC_TASK_SCHEDULE() ]
++ */
++struct dwc_tasklet {
++	dwc_tasklet_callback_t cb;
++	void *data;
++};
++
++static void tasklet_callback(void *data)
++{
++	dwc_tasklet_t *task = (dwc_tasklet_t *)data;
++
++	task->cb(task->data);
++}
++
++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
++{
++	dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task));
++
++	if (task) {
++		task->cb = cb;
++		task->data = data;
++	} else {
++		DWC_ERROR("Cannot allocate memory for tasklet");
++	}
++
++	return task;
++}
++
++void DWC_TASK_FREE(dwc_tasklet_t *task)
++{
++	DWC_FREE(task);
++}
++
++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
++{
++	tasklet_callback(task);
++}
++
++
++/* workqueues
++ - Runs in process context (can sleep)
++ */
++typedef struct work_container {
++	dwc_work_callback_t cb;
++	void *data;
++	dwc_workq_t *wq;
++	char *name;
++	int hz;
++	struct work task;
++} work_container_t;
++
++struct dwc_workq {
++	struct workqueue *taskq;
++	dwc_spinlock_t *lock;
++	dwc_waitq_t *waitq;
++	int pending;
++	struct work_container *container;
++};
++
++static void do_work(struct work *task, void *data)
++{
++	dwc_workq_t *wq = (dwc_workq_t *)data;
++	work_container_t *container = wq->container;
++	dwc_irqflags_t flags;
++
++	if (container->hz) {
++		tsleep(container, 0, "dw3wrk", container->hz);
++	}
++
++	container->cb(container->data);
++	DWC_DEBUG("Work done: %s, container=%p", container->name, container);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	if (container->name)
++		DWC_FREE(container->name);
++	DWC_FREE(container);
++	wq->pending--;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++}
++
++static int work_done(void *data)
++{
++	dwc_workq_t *workq = (dwc_workq_t *)data;
++
++	return workq->pending == 0;
++}
++
++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
++{
++	return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
++}
++
++dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
++{
++	int result;
++	dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for workqueue");
++		return NULL;
++	}
++
++	result = workqueue_create(&wq->taskq, name, do_work, wq, 0 /*PWAIT*/,
++				  IPL_BIO, 0);
++	if (result) {
++		DWC_ERROR("Cannot create workqueue");
++		goto no_taskq;
++	}
++
++	wq->pending = 0;
++
++	wq->lock = DWC_SPINLOCK_ALLOC();
++	if (!wq->lock) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		goto no_lock;
++	}
++
++	wq->waitq = DWC_WAITQ_ALLOC();
++	if (!wq->waitq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		goto no_waitq;
++	}
++
++	return wq;
++
++ no_waitq:
++	DWC_SPINLOCK_FREE(wq->lock);
++ no_lock:
++	workqueue_destroy(wq->taskq);
++ no_taskq:
++	DWC_FREE(wq);
++
++	return NULL;
++}
++
++void DWC_WORKQ_FREE(dwc_workq_t *wq)
++{
++#ifdef DEBUG
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++
++	if (wq->pending != 0) {
++		struct work_container *container = wq->container;
++
++		DWC_ERROR("Destroying work queue with pending work");
++
++		if (container && container->name) {
++			DWC_ERROR("Work %s still pending", container->name);
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++#endif
++	DWC_WAITQ_FREE(wq->waitq);
++	DWC_SPINLOCK_FREE(wq->lock);
++	workqueue_destroy(wq->taskq);
++	DWC_FREE(wq);
++}
++
++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
++			char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	container->hz = 0;
++	wq->container = container;
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++	workqueue_enqueue(wq->taskq, &container->task);
++}
++
++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
++				void *data, uint32_t time, char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	struct timeval tv;
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	container->hz = tvtohz(&tv);
++	wq->container = container;
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++	workqueue_enqueue(wq->taskq, &container->task);
++}
++
++int DWC_WORKQ_PENDING(dwc_workq_t *wq)
++{
++	return wq->pending;
++}
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_crypto.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_crypto.c
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_crypto.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_crypto.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,308 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $
++ * $Revision: #5 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++
++/** @file
++ * This file contains the WUSB cryptographic routines.
++ */
++
++#ifdef DWC_CRYPTOLIB
++
++#include "dwc_crypto.h"
++#include "usb.h"
++
++#ifdef DEBUG
++static inline void dump_bytes(char *name, uint8_t *bytes, int len)
++{
++	int i;
++	DWC_PRINTF("%s: ", name);
++	for (i=0; i<len; i++) {
++		DWC_PRINTF("%02x ", bytes[i]);
++	}
++	DWC_PRINTF("\n");
++}
++#else
++#define dump_bytes(x...)
++#endif
++
++/* Display a block */
++void show_block(const u8 *blk, const char *prefix, const char *suffix, int a)
++{
++#ifdef DWC_DEBUG_CRYPTO
++	int i, blksize = 16;
++
++	DWC_DEBUG("%s", prefix);
++
++	if (suffix == NULL) {
++		suffix = "\n";
++		blksize = a;
++	}
++
++	for (i = 0; i < blksize; i++)
++		DWC_PRINT("%02x%s", *blk++, ((i & 3) == 3) ? "  " : " ");
++	DWC_PRINT(suffix);
++#endif
++}
++
++/**
++ * Encrypts an array of bytes using the AES encryption engine.
++ * If <code>dst</code> == <code>src</code>, then the bytes will be encrypted
++ * in-place.
++ *
++ * @return  0 on success, negative error code on error.
++ */
++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst)
++{
++	u8 block_t[16];
++	DWC_MEMSET(block_t, 0, 16);
++
++	return DWC_AES_CBC(src, 16, key, 16, block_t, dst);
++}
++
++/**
++ * The CCM-MAC-FUNCTION described in section 6.5 of the WUSB spec.
++ * This function takes a data string and returns the encrypted CBC
++ * Counter-mode MIC.
++ *
++ * @param key     The 128-bit symmetric key.
++ * @param nonce   The CCM nonce.
++ * @param label   The unique 14-byte ASCII text label.
++ * @param bytes   The byte array to be encrypted.
++ * @param len     Length of the byte array.
++ * @param result  Byte array to receive the 8-byte encrypted MIC.
++ */
++void dwc_wusb_cmf(u8 *key, u8 *nonce,
++		  char *label, u8 *bytes, int len, u8 *result)
++{
++	u8 block_m[16];
++	u8 block_x[16];
++	u8 block_t[8];
++	int idx, blkNum;
++	u16 la = (u16)(len + 14);
++
++	/* Set the AES-128 key */
++	//dwc_aes_setkey(tfm, key, 16);
++
++	/* Fill block B0 from flags = 0x59, N, and l(m) = 0 */
++	block_m[0] = 0x59;
++	for (idx = 0; idx < 13; idx++)
++		block_m[idx + 1] = nonce[idx];
++	block_m[14] = 0;
++	block_m[15] = 0;
++
++	/* Produce the CBC IV */
++	dwc_wusb_aes_encrypt(block_m, key, block_x);
++	show_block(block_m, "CBC IV in: ", "\n", 0);
++	show_block(block_x, "CBC IV out:", "\n", 0);
++
++	/* Fill block B1 from l(a) = Blen + 14, and A */
++	block_x[0] ^= (u8)(la >> 8);
++	block_x[1] ^= (u8)la;
++	for (idx = 0; idx < 14; idx++)
++		block_x[idx + 2] ^= label[idx];
++	show_block(block_x, "After xor: ", "b1\n", 16);
++
++	dwc_wusb_aes_encrypt(block_x, key, block_x);
++	show_block(block_x, "After AES: ", "b1\n", 16);
++
++	idx = 0;
++	blkNum = 0;
++
++	/* Fill remaining blocks with B */
++	while (len-- > 0) {
++		block_x[idx] ^= *bytes++;
++		if (++idx >= 16) {
++			idx = 0;
++			show_block(block_x, "After xor: ", "\n", blkNum);
++			dwc_wusb_aes_encrypt(block_x, key, block_x);
++			show_block(block_x, "After AES: ", "\n", blkNum);
++			blkNum++;
++		}
++	}
++
++	/* Handle partial last block */
++	if (idx > 0) {
++		show_block(block_x, "After xor: ", "\n", blkNum);
++		dwc_wusb_aes_encrypt(block_x, key, block_x);
++		show_block(block_x, "After AES: ", "\n", blkNum);
++	}
++
++	/* Save the MIC tag */
++	DWC_MEMCPY(block_t, block_x, 8);
++	show_block(block_t, "MIC tag  : ", NULL, 8);
++
++	/* Fill block A0 from flags = 0x01, N, and counter = 0 */
++	block_m[0] = 0x01;
++	block_m[14] = 0;
++	block_m[15] = 0;
++
++	/* Encrypt the counter */
++	dwc_wusb_aes_encrypt(block_m, key, block_x);
++	show_block(block_x, "CTR[MIC] : ", NULL, 8);
++
++	/* XOR with MIC tag */
++	for (idx = 0; idx < 8; idx++) {
++		block_t[idx] ^= block_x[idx];
++	}
++
++	/* Return result to caller */
++	DWC_MEMCPY(result, block_t, 8);
++	show_block(result, "CCM-MIC  : ", NULL, 8);
++
++}
++
++/**
++ * The PRF function described in section 6.5 of the WUSB spec. This function
++ * concatenates MIC values returned from dwc_cmf() to create a value of
++ * the requested length.
++ *
++ * @param prf_len  Length of the PRF function in bits (64, 128, or 256).
++ * @param key, nonce, label, bytes, len  Same as for dwc_cmf().
++ * @param result   Byte array to receive the result.
++ */
++void dwc_wusb_prf(int prf_len, u8 *key,
++		  u8 *nonce, char *label, u8 *bytes, int len, u8 *result)
++{
++	int i;
++
++	nonce[0] = 0;
++	for (i = 0; i < prf_len >> 6; i++, nonce[0]++) {
++		dwc_wusb_cmf(key, nonce, label, bytes, len, result);
++		result += 8;
++	}
++}
++
++/**
++ * Fills in CCM Nonce per the WUSB spec.
++ *
++ * @param[in] haddr Host address.
++ * @param[in] daddr Device address.
++ * @param[in] tkid Session Key(PTK) identifier.
++ * @param[out] nonce Pointer to where the CCM Nonce output is to be written.
++ */
++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid,
++			     uint8_t *nonce)
++{
++
++	DWC_DEBUG("%s %x %x\n", __func__, daddr, haddr);
++
++	DWC_MEMSET(&nonce[0], 0, 16);
++
++	DWC_MEMCPY(&nonce[6], tkid, 3);
++	nonce[9] = daddr & 0xFF;
++	nonce[10] = (daddr >> 8) & 0xFF;
++	nonce[11] = haddr & 0xFF;
++	nonce[12] = (haddr >> 8) & 0xFF;
++
++	dump_bytes("CCM nonce", nonce, 16);
++}
++
++/**
++ * Generates a 16-byte cryptographic-grade random number for the Host/Device
++ * Nonce.
++ */
++void dwc_wusb_gen_nonce(uint16_t addr, uint8_t *nonce)
++{
++	uint8_t inonce[16];
++	uint32_t temp[4];
++
++	/* Fill in the Nonce */
++	DWC_MEMSET(&inonce[0], 0, sizeof(inonce));
++	inonce[9] = addr & 0xFF;
++	inonce[10] = (addr >> 8) & 0xFF;
++	inonce[11] = inonce[9];
++	inonce[12] = inonce[10];
++
++	/* Collect "randomness samples" */
++	DWC_RANDOM_BYTES((uint8_t *)temp, 16);
++
++	dwc_wusb_prf_128((uint8_t *)temp, nonce,
++			 "Random Numbers", (uint8_t *)temp, sizeof(temp),
++			 nonce);
++}
++
++/**
++ * Generates the Session Key (PTK) and Key Confirmation Key (KCK) per the
++ * WUSB spec.
++ *
++ * @param[in] ccm_nonce Pointer to CCM Nonce.
++ * @param[in] mk Master Key to derive the session from
++ * @param[in] hnonce Pointer to Host Nonce.
++ * @param[in] dnonce Pointer to Device Nonce.
++ * @param[out] kck Pointer to where the KCK output is to be written.
++ * @param[out] ptk Pointer to where the PTK output is to be written.
++ */
++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, uint8_t *hnonce,
++		      uint8_t *dnonce, uint8_t *kck, uint8_t *ptk)
++{
++	uint8_t idata[32];
++	uint8_t odata[32];
++
++	dump_bytes("ck", mk, 16);
++	dump_bytes("hnonce", hnonce, 16);
++	dump_bytes("dnonce", dnonce, 16);
++
++	/* The data is the HNonce and DNonce concatenated */
++	DWC_MEMCPY(&idata[0], hnonce, 16);
++	DWC_MEMCPY(&idata[16], dnonce, 16);
++
++	dwc_wusb_prf_256(mk, ccm_nonce, "Pair-wise keys", idata, 32, odata);
++
++	/* Low 16 bytes of the result is the KCK, high 16 is the PTK */
++	DWC_MEMCPY(kck, &odata[0], 16);
++	DWC_MEMCPY(ptk, &odata[16], 16);
++
++	dump_bytes("kck", kck, 16);
++	dump_bytes("ptk", ptk, 16);
++}
++
++/**
++ * Generates the Message Integrity Code over the Handshake data per the
++ * WUSB spec.
++ *
++ * @param ccm_nonce Pointer to CCM Nonce.
++ * @param kck   Pointer to Key Confirmation Key.
++ * @param data  Pointer to Handshake data to be checked.
++ * @param mic   Pointer to where the MIC output is to be written.
++ */
++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t *kck,
++		      uint8_t *data, uint8_t *mic)
++{
++
++	dwc_wusb_prf_64(kck, ccm_nonce, "out-of-bandMIC",
++			data, WUSB_HANDSHAKE_LEN_FOR_MIC, mic);
++}
++
++#endif	/* DWC_CRYPTOLIB */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_crypto.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_crypto.h
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_crypto.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_crypto.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,111 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $
++ * $Revision: #3 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++
++#ifndef _DWC_CRYPTO_H_
++#define _DWC_CRYPTO_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * This file contains declarations for the WUSB Cryptographic routines as
++ * defined in the WUSB spec.  They are only to be used internally by the DWC UWB
++ * modules.
++ */
++
++#include "dwc_os.h"
++
++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst);
++
++void dwc_wusb_cmf(u8 *key, u8 *nonce,
++		  char *label, u8 *bytes, int len, u8 *result);
++void dwc_wusb_prf(int prf_len, u8 *key,
++		  u8 *nonce, char *label, u8 *bytes, int len, u8 *result);
++
++/**
++ * The PRF-64 function described in section 6.5 of the WUSB spec.
++ *
++ * @param key, nonce, label, bytes, len, result  Same as for dwc_prf().
++ */
++static inline void dwc_wusb_prf_64(u8 *key, u8 *nonce,
++				   char *label, u8 *bytes, int len, u8 *result)
++{
++	dwc_wusb_prf(64, key, nonce, label, bytes, len, result);
++}
++
++/**
++ * The PRF-128 function described in section 6.5 of the WUSB spec.
++ *
++ * @param key, nonce, label, bytes, len, result  Same as for dwc_prf().
++ */
++static inline void dwc_wusb_prf_128(u8 *key, u8 *nonce,
++				    char *label, u8 *bytes, int len, u8 *result)
++{
++	dwc_wusb_prf(128, key, nonce, label, bytes, len, result);
++}
++
++/**
++ * The PRF-256 function described in section 6.5 of the WUSB spec.
++ *
++ * @param key, nonce, label, bytes, len, result  Same as for dwc_prf().
++ */
++static inline void dwc_wusb_prf_256(u8 *key, u8 *nonce,
++				    char *label, u8 *bytes, int len, u8 *result)
++{
++	dwc_wusb_prf(256, key, nonce, label, bytes, len, result);
++}
++
++
++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid,
++			       uint8_t *nonce);
++void dwc_wusb_gen_nonce(uint16_t addr,
++			  uint8_t *nonce);
++
++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk,
++			uint8_t *hnonce, uint8_t *dnonce,
++			uint8_t *kck, uint8_t *ptk);
++
++
++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t
++			*kck, uint8_t *data, uint8_t *mic);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_CRYPTO_H_ */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_dh.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_dh.c
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_dh.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_dh.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,291 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $
++ * $Revision: #3 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifdef DWC_CRYPTOLIB
++
++#ifndef CONFIG_MACH_IPMATE
++
++#include "dwc_dh.h"
++#include "dwc_modpow.h"
++
++#ifdef DEBUG
++/* This function prints out a buffer in the format described in the Association
++ * Model specification. */
++static void dh_dump(char *str, void *_num, int len)
++{
++	uint8_t *num = _num;
++	int i;
++	DWC_PRINTF("%s\n", str);
++	for (i = 0; i < len; i ++) {
++		DWC_PRINTF("%02x", num[i]);
++		if (((i + 1) % 2) == 0) DWC_PRINTF(" ");
++		if (((i + 1) % 26) == 0) DWC_PRINTF("\n");
++	}
++
++	DWC_PRINTF("\n");
++}
++#else
++#define dh_dump(_x...) do {; } while(0)
++#endif
++
++/* Constant g value */
++static __u32 dh_g[] = {
++	0x02000000,
++};
++
++/* Constant p value */
++static __u32 dh_p[] = {
++	0xFFFFFFFF, 0xFFFFFFFF, 0xA2DA0FC9, 0x34C26821, 0x8B62C6C4, 0xD11CDC80, 0x084E0229, 0x74CC678A,
++	0xA6BE0B02, 0x229B133B, 0x79084A51, 0xDD04348E, 0xB31995EF, 0x1B433ACD, 0x6D0A2B30, 0x37145FF2,
++	0x6D35E14F, 0x45C2516D, 0x76B585E4, 0xC67E5E62, 0xE9424CF4, 0x6BED37A6, 0xB65CFF0B, 0xEDB706F4,
++	0xFB6B38EE, 0xA59F895A, 0x11249FAE, 0xE61F4B7C, 0x51662849, 0x3D5BE4EC, 0xB87C00C2, 0x05BF63A1,
++	0x3648DA98, 0x9AD3551C, 0xA83F1669, 0x5FCF24FD, 0x235D6583, 0x96ADA3DC, 0x56F3621C, 0xBB528520,
++	0x0729D59E, 0x6D969670, 0x4E350C67, 0x0498BC4A, 0x086C74F1, 0x7C2118CA, 0x465E9032, 0x3BCE362E,
++	0x2C779EE3, 0x03860E18, 0xA283279B, 0x8FA207EC, 0xF05DC5B5, 0xC9524C6F, 0xF6CB2BDE, 0x18175895,
++	0x7C499539, 0xE56A95EA, 0x1826D215, 0x1005FA98, 0x5A8E7215, 0x2DC4AA8A, 0x0D1733AD, 0x337A5004,
++	0xAB2155A8, 0x64BA1CDF, 0x0485FBEC, 0x0AEFDB58, 0x5771EA8A, 0x7D0C065D, 0x850F97B3, 0xC7E4E1A6,
++	0x8CAEF5AB, 0xD73309DB, 0xE0948C1E, 0x9D61254A, 0x26D2E3CE, 0x6BEED21A, 0x06FA2FF1, 0x64088AD9,
++	0x730276D8, 0x646AC83E, 0x182B1F52, 0x0C207B17, 0x5717E1BB, 0x6C5D617A, 0xC0880977, 0xE246D9BA,
++	0xA04FE208, 0x31ABE574, 0xFC5BDB43, 0x8E10FDE0, 0x20D1824B, 0xCAD23AA9, 0xFFFFFFFF, 0xFFFFFFFF,
++};
++
++static void dh_swap_bytes(void *_in, void *_out, uint32_t len)
++{
++	uint8_t *in = _in;
++	uint8_t *out = _out;
++	int i;
++	for (i=0; i<len; i++) {
++		out[i] = in[len-1-i];
++	}
++}
++
++/* Computes the modular exponentiation (num^exp % mod).  num, exp, and mod are
++ * big endian numbers of size len, in bytes.  Each len value must be a multiple
++ * of 4. */
++int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len,
++		  void *exp, uint32_t exp_len,
++		  void *mod, uint32_t mod_len,
++		  void *out)
++{
++	/* modpow() takes little endian numbers.  AM uses big-endian.  This
++	 * function swaps bytes of numbers before passing onto modpow. */
++
++	int retval = 0;
++	uint32_t *result;
++
++	uint32_t *bignum_num = dwc_alloc(mem_ctx, num_len + 4);
++	uint32_t *bignum_exp = dwc_alloc(mem_ctx, exp_len + 4);
++	uint32_t *bignum_mod = dwc_alloc(mem_ctx, mod_len + 4);
++
++	dh_swap_bytes(num, &bignum_num[1], num_len);
++	bignum_num[0] = num_len / 4;
++
++	dh_swap_bytes(exp, &bignum_exp[1], exp_len);
++	bignum_exp[0] = exp_len / 4;
++
++	dh_swap_bytes(mod, &bignum_mod[1], mod_len);
++	bignum_mod[0] = mod_len / 4;
++
++	result = dwc_modpow(mem_ctx, bignum_num, bignum_exp, bignum_mod);
++	if (!result) {
++		retval = -1;
++		goto dh_modpow_nomem;
++	}
++
++	dh_swap_bytes(&result[1], out, result[0] * 4);
++	dwc_free(mem_ctx, result);
++
++ dh_modpow_nomem:
++	dwc_free(mem_ctx, bignum_num);
++	dwc_free(mem_ctx, bignum_exp);
++	dwc_free(mem_ctx, bignum_mod);
++	return retval;
++}
++
++
++int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pk, uint8_t *hash)
++{
++	int retval;
++	uint8_t m3[385];
++
++#ifndef DH_TEST_VECTORS
++	DWC_RANDOM_BYTES(exp, 32);
++#endif
++
++	/* Compute the pkd */
++	if ((retval = dwc_dh_modpow(mem_ctx, dh_g, 4,
++				    exp, 32,
++				    dh_p, 384, pk))) {
++		return retval;
++	}
++
++	m3[384] = nd;
++	DWC_MEMCPY(&m3[0], pk, 384);
++	DWC_SHA256(m3, 385, hash);
++
++ 	dh_dump("PK", pk, 384);
++ 	dh_dump("SHA-256(M3)", hash, 32);
++	return 0;
++}
++
++int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd,
++		       uint8_t *exp, int is_host,
++		       char *dd, uint8_t *ck, uint8_t *kdk)
++{
++	int retval;
++	uint8_t mv[784];
++	uint8_t sha_result[32];
++	uint8_t dhkey[384];
++	uint8_t shared_secret[384];
++	char *message;
++	uint32_t vd;
++
++	uint8_t *pk;
++
++	if (is_host) {
++		pk = pkd;
++	}
++	else {
++		pk = pkh;
++	}
++
++	if ((retval = dwc_dh_modpow(mem_ctx, pk, 384,
++				    exp, 32,
++				    dh_p, 384, shared_secret))) {
++		return retval;
++	}
++	dh_dump("Shared Secret", shared_secret, 384);
++
++	DWC_SHA256(shared_secret, 384, dhkey);
++	dh_dump("DHKEY", dhkey, 384);
++
++	DWC_MEMCPY(&mv[0], pkd, 384);
++	DWC_MEMCPY(&mv[384], pkh, 384);
++	DWC_MEMCPY(&mv[768], "displayed digest", 16);
++	dh_dump("MV", mv, 784);
++
++	DWC_SHA256(mv, 784, sha_result);
++	dh_dump("SHA-256(MV)", sha_result, 32);
++	dh_dump("First 32-bits of SHA-256(MV)", sha_result, 4);
++
++	dh_swap_bytes(sha_result, &vd, 4);
++#ifdef DEBUG
++	DWC_PRINTF("Vd (decimal) = %d\n", vd);
++#endif
++
++	switch (nd) {
++	case 2:
++		vd = vd % 100;
++		DWC_SPRINTF(dd, "%02d", vd);
++		break;
++	case 3:
++		vd = vd % 1000;
++		DWC_SPRINTF(dd, "%03d", vd);
++		break;
++	case 4:
++		vd = vd % 10000;
++		DWC_SPRINTF(dd, "%04d", vd);
++		break;
++	}
++#ifdef DEBUG
++	DWC_PRINTF("Display Digits: %s\n", dd);
++#endif
++
++	message = "connection key";
++	DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result);
++ 	dh_dump("HMAC(SHA-256, DHKey, connection key)", sha_result, 32);
++	DWC_MEMCPY(ck, sha_result, 16);
++
++	message = "key derivation key";
++	DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result);
++ 	dh_dump("HMAC(SHA-256, DHKey, key derivation key)", sha_result, 32);
++	DWC_MEMCPY(kdk, sha_result, 32);
++
++	return 0;
++}
++
++
++#ifdef DH_TEST_VECTORS
++
++static __u8 dh_a[] = {
++	0x44, 0x00, 0x51, 0xd6,
++	0xf0, 0xb5, 0x5e, 0xa9,
++	0x67, 0xab, 0x31, 0xc6,
++	0x8a, 0x8b, 0x5e, 0x37,
++	0xd9, 0x10, 0xda, 0xe0,
++	0xe2, 0xd4, 0x59, 0xa4,
++	0x86, 0x45, 0x9c, 0xaa,
++	0xdf, 0x36, 0x75, 0x16,
++};
++
++static __u8 dh_b[] = {
++	0x5d, 0xae, 0xc7, 0x86,
++	0x79, 0x80, 0xa3, 0x24,
++	0x8c, 0xe3, 0x57, 0x8f,
++	0xc7, 0x5f, 0x1b, 0x0f,
++	0x2d, 0xf8, 0x9d, 0x30,
++	0x6f, 0xa4, 0x52, 0xcd,
++	0xe0, 0x7a, 0x04, 0x8a,
++	0xde, 0xd9, 0x26, 0x56,
++};
++
++void dwc_run_dh_test_vectors(void *mem_ctx)
++{
++	uint8_t pkd[384];
++	uint8_t pkh[384];
++	uint8_t hashd[32];
++	uint8_t hashh[32];
++	uint8_t ck[16];
++	uint8_t kdk[32];
++	char dd[5];
++
++	DWC_PRINTF("\n\n\nDH_TEST_VECTORS\n\n");
++
++	/* compute the PKd and SHA-256(PKd || Nd) */
++	DWC_PRINTF("Computing PKd\n");
++	dwc_dh_pk(mem_ctx, 2, dh_a, pkd, hashd);
++
++	/* compute the PKd and SHA-256(PKh || Nd) */
++	DWC_PRINTF("Computing PKh\n");
++	dwc_dh_pk(mem_ctx, 2, dh_b, pkh, hashh);
++
++	/* compute the dhkey */
++	dwc_dh_derive_keys(mem_ctx, 2, pkh, pkd, dh_a, 0, dd, ck, kdk);
++}
++#endif /* DH_TEST_VECTORS */
++
++#endif /* !CONFIG_MACH_IPMATE */
++
++#endif /* DWC_CRYPTOLIB */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_dh.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_dh.h
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_dh.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_dh.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,106 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.h $
++ * $Revision: #4 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifndef _DWC_DH_H_
++#define _DWC_DH_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dwc_os.h"
++
++/** @file
++ *
++ * This file defines the common functions on device and host for performing
++ * numeric association as defined in the WUSB spec.  They are only to be
++ * used internally by the DWC UWB modules. */
++
++extern int dwc_dh_sha256(uint8_t *message, uint32_t len, uint8_t *out);
++extern int dwc_dh_hmac_sha256(uint8_t *message, uint32_t messagelen,
++			      uint8_t *key, uint32_t keylen,
++			      uint8_t *out);
++extern int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len,
++			 void *exp, uint32_t exp_len,
++			 void *mod, uint32_t mod_len,
++			 void *out);
++
++/** Computes PKD or PKH, and SHA-256(PKd || Nd)
++ *
++ * PK = g^exp mod p.
++ *
++ * Input:
++ * Nd = Number of digits on the device.
++ *
++ * Output:
++ * exp = A 32-byte buffer to be filled with a randomly generated number.
++ *       used as either A or B.
++ * pk = A 384-byte buffer to be filled with the PKH or PKD.
++ * hash = A 32-byte buffer to be filled with SHA-256(PK || ND).
++ */
++extern int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pkd, uint8_t *hash);
++
++/** Computes the DHKEY, and VD.
++ *
++ * If called from host, then it will comput DHKEY=PKD^exp % p.
++ * If called from device, then it will comput DHKEY=PKH^exp % p.
++ *
++ * Input:
++ * pkd = The PKD value.
++ * pkh = The PKH value.
++ * exp = The A value (if device) or B value (if host) generated in dwc_wudev_dh_pk.
++ * is_host = Set to non zero if a WUSB host is calling this function.
++ *
++ * Output:
++
++ * dd = A pointer to an buffer to be set to the displayed digits string to be shown
++ *      to the user.  This buffer should be at 5 bytes long to hold 4 digits plus a
++ *      null termination character.  This buffer can be used directly for display.
++ * ck = A 16-byte buffer to be filled with the CK.
++ * kdk = A 32-byte buffer to be filled with the KDK.
++ */
++extern int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd,
++			      uint8_t *exp, int is_host,
++			      char *dd, uint8_t *ck, uint8_t *kdk);
++
++#ifdef DH_TEST_VECTORS
++extern void dwc_run_dh_test_vectors(void);
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_DH_H_ */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_list.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_list.h
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_list.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_list.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,594 @@
++/*	$OpenBSD: queue.h,v 1.26 2004/05/04 16:59:32 grange Exp $	*/
++/*	$NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $	*/
++
++/*
++ * Copyright (c) 1991, 1993
++ *	The Regents of the University of California.  All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. Neither the name of the University nor the names of its contributors
++ *    may be used to endorse or promote products derived from this software
++ *    without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
++ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
++ * SUCH DAMAGE.
++ *
++ *	@(#)queue.h	8.5 (Berkeley) 8/20/94
++ */
++
++#ifndef _DWC_LIST_H_
++#define _DWC_LIST_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * This file defines linked list operations.  It is derived from BSD with
++ * only the MACRO names being prefixed with DWC_.  This is because a few of
++ * these names conflict with those on Linux.  For documentation on use, see the
++ * inline comments in the source code.  The original license for this source
++ * code applies and is preserved in the dwc_list.h source file.
++ */
++
++/*
++ * This file defines five types of data structures: singly-linked lists,
++ * lists, simple queues, tail queues, and circular queues.
++ *
++ *
++ * A singly-linked list is headed by a single forward pointer. The elements
++ * are singly linked for minimum space and pointer manipulation overhead at
++ * the expense of O(n) removal for arbitrary elements. New elements can be
++ * added to the list after an existing element or at the head of the list.
++ * Elements being removed from the head of the list should use the explicit
++ * macro for this purpose for optimum efficiency. A singly-linked list may
++ * only be traversed in the forward direction.  Singly-linked lists are ideal
++ * for applications with large datasets and few or no removals or for
++ * implementing a LIFO queue.
++ *
++ * A list is headed by a single forward pointer (or an array of forward
++ * pointers for a hash table header). The elements are doubly linked
++ * so that an arbitrary element can be removed without a need to
++ * traverse the list. New elements can be added to the list before
++ * or after an existing element or at the head of the list. A list
++ * may only be traversed in the forward direction.
++ *
++ * A simple queue is headed by a pair of pointers, one the head of the
++ * list and the other to the tail of the list. The elements are singly
++ * linked to save space, so elements can only be removed from the
++ * head of the list. New elements can be added to the list before or after
++ * an existing element, at the head of the list, or at the end of the
++ * list. A simple queue may only be traversed in the forward direction.
++ *
++ * A tail queue is headed by a pair of pointers, one to the head of the
++ * list and the other to the tail of the list. The elements are doubly
++ * linked so that an arbitrary element can be removed without a need to
++ * traverse the list. New elements can be added to the list before or
++ * after an existing element, at the head of the list, or at the end of
++ * the list. A tail queue may be traversed in either direction.
++ *
++ * A circle queue is headed by a pair of pointers, one to the head of the
++ * list and the other to the tail of the list. The elements are doubly
++ * linked so that an arbitrary element can be removed without a need to
++ * traverse the list. New elements can be added to the list before or after
++ * an existing element, at the head of the list, or at the end of the list.
++ * A circle queue may be traversed in either direction, but has a more
++ * complex end of list detection.
++ *
++ * For details on the use of these macros, see the queue(3) manual page.
++ */
++
++/*
++ * Double-linked List.
++ */
++
++typedef struct dwc_list_link {
++	struct dwc_list_link *next;
++	struct dwc_list_link *prev;
++} dwc_list_link_t;
++
++#define DWC_LIST_INIT(link) do {	\
++	(link)->next = (link);		\
++	(link)->prev = (link);		\
++} while (0)
++
++#define DWC_LIST_FIRST(link)	((link)->next)
++#define DWC_LIST_LAST(link)	((link)->prev)
++#define DWC_LIST_END(link)	(link)
++#define DWC_LIST_NEXT(link)	((link)->next)
++#define DWC_LIST_PREV(link)	((link)->prev)
++#define DWC_LIST_EMPTY(link)	\
++	(DWC_LIST_FIRST(link) == DWC_LIST_END(link))
++#define DWC_LIST_ENTRY(link, type, field)			\
++	(type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field))
++
++#if 0
++#define DWC_LIST_INSERT_HEAD(list, link) do {			\
++	(link)->next = (list)->next;				\
++	(link)->prev = (list);					\
++	(list)->next->prev = (link);				\
++	(list)->next = (link);					\
++} while (0)
++
++#define DWC_LIST_INSERT_TAIL(list, link) do {			\
++	(link)->next = (list);					\
++	(link)->prev = (list)->prev;				\
++	(list)->prev->next = (link);				\
++	(list)->prev = (link);					\
++} while (0)
++#else
++#define DWC_LIST_INSERT_HEAD(list, link) do {			\
++	dwc_list_link_t *__next__ = (list)->next;		\
++	__next__->prev = (link);				\
++	(link)->next = __next__;				\
++	(link)->prev = (list);					\
++	(list)->next = (link);					\
++} while (0)
++
++#define DWC_LIST_INSERT_TAIL(list, link) do {			\
++	dwc_list_link_t *__prev__ = (list)->prev;		\
++	(list)->prev = (link);					\
++	(link)->next = (list);					\
++	(link)->prev = __prev__;				\
++	__prev__->next = (link);				\
++} while (0)
++#endif
++
++#if 0
++static inline void __list_add(struct list_head *new,
++                              struct list_head *prev,
++                              struct list_head *next)
++{
++        next->prev = new;
++        new->next = next;
++        new->prev = prev;
++        prev->next = new;
++}
++
++static inline void list_add(struct list_head *new, struct list_head *head)
++{
++        __list_add(new, head, head->next);
++}
++
++static inline void list_add_tail(struct list_head *new, struct list_head *head)
++{
++        __list_add(new, head->prev, head);
++}
++
++static inline void __list_del(struct list_head * prev, struct list_head * next)
++{
++        next->prev = prev;
++        prev->next = next;
++}
++
++static inline void list_del(struct list_head *entry)
++{
++        __list_del(entry->prev, entry->next);
++        entry->next = LIST_POISON1;
++        entry->prev = LIST_POISON2;
++}
++#endif
++
++#define DWC_LIST_REMOVE(link) do {				\
++	(link)->next->prev = (link)->prev;			\
++	(link)->prev->next = (link)->next;			\
++} while (0)
++
++#define DWC_LIST_REMOVE_INIT(link) do {				\
++	DWC_LIST_REMOVE(link);					\
++	DWC_LIST_INIT(link);					\
++} while (0)
++
++#define DWC_LIST_MOVE_HEAD(list, link) do {			\
++	DWC_LIST_REMOVE(link);					\
++	DWC_LIST_INSERT_HEAD(list, link);			\
++} while (0)
++
++#define DWC_LIST_MOVE_TAIL(list, link) do {			\
++	DWC_LIST_REMOVE(link);					\
++	DWC_LIST_INSERT_TAIL(list, link);			\
++} while (0)
++
++#define DWC_LIST_FOREACH(var, list)				\
++	for((var) = DWC_LIST_FIRST(list);			\
++	    (var) != DWC_LIST_END(list);			\
++	    (var) = DWC_LIST_NEXT(var))
++
++#define DWC_LIST_FOREACH_SAFE(var, var2, list)			\
++	for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var);	\
++	    (var) != DWC_LIST_END(list);			\
++	    (var) = (var2), (var2) = DWC_LIST_NEXT(var2))
++
++#define DWC_LIST_FOREACH_REVERSE(var, list)			\
++	for((var) = DWC_LIST_LAST(list);			\
++	    (var) != DWC_LIST_END(list);			\
++	    (var) = DWC_LIST_PREV(var))
++
++/*
++ * Singly-linked List definitions.
++ */
++#define DWC_SLIST_HEAD(name, type)					\
++struct name {								\
++	struct type *slh_first;	/* first element */			\
++}
++
++#define DWC_SLIST_HEAD_INITIALIZER(head)				\
++	{ NULL }
++
++#define DWC_SLIST_ENTRY(type)						\
++struct {								\
++	struct type *sle_next;	/* next element */			\
++}
++
++/*
++ * Singly-linked List access methods.
++ */
++#define DWC_SLIST_FIRST(head)	((head)->slh_first)
++#define DWC_SLIST_END(head)		NULL
++#define DWC_SLIST_EMPTY(head)	(SLIST_FIRST(head) == SLIST_END(head))
++#define DWC_SLIST_NEXT(elm, field)	((elm)->field.sle_next)
++
++#define DWC_SLIST_FOREACH(var, head, field)				\
++	for((var) = SLIST_FIRST(head);					\
++	    (var) != SLIST_END(head);					\
++	    (var) = SLIST_NEXT(var, field))
++
++#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field)		\
++	for((varp) = &SLIST_FIRST((head));				\
++	    ((var) = *(varp)) != SLIST_END(head);			\
++	    (varp) = &SLIST_NEXT((var), field))
++
++/*
++ * Singly-linked List functions.
++ */
++#define DWC_SLIST_INIT(head) {						\
++	SLIST_FIRST(head) = SLIST_END(head);				\
++}
++
++#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do {		\
++	(elm)->field.sle_next = (slistelm)->field.sle_next;		\
++	(slistelm)->field.sle_next = (elm);				\
++} while (0)
++
++#define DWC_SLIST_INSERT_HEAD(head, elm, field) do {			\
++	(elm)->field.sle_next = (head)->slh_first;			\
++	(head)->slh_first = (elm);					\
++} while (0)
++
++#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do {			\
++	(elm)->field.sle_next = (elm)->field.sle_next->field.sle_next;	\
++} while (0)
++
++#define DWC_SLIST_REMOVE_HEAD(head, field) do {				\
++	(head)->slh_first = (head)->slh_first->field.sle_next;		\
++} while (0)
++
++#define DWC_SLIST_REMOVE(head, elm, type, field) do {			\
++	if ((head)->slh_first == (elm)) {				\
++		SLIST_REMOVE_HEAD((head), field);			\
++	}								\
++	else {								\
++		struct type *curelm = (head)->slh_first;		\
++		while( curelm->field.sle_next != (elm) )		\
++			curelm = curelm->field.sle_next;		\
++		curelm->field.sle_next =				\
++		    curelm->field.sle_next->field.sle_next;		\
++	}								\
++} while (0)
++
++/*
++ * Simple queue definitions.
++ */
++#define DWC_SIMPLEQ_HEAD(name, type)					\
++struct name {								\
++	struct type *sqh_first;	/* first element */			\
++	struct type **sqh_last;	/* addr of last next element */		\
++}
++
++#define DWC_SIMPLEQ_HEAD_INITIALIZER(head)				\
++	{ NULL, &(head).sqh_first }
++
++#define DWC_SIMPLEQ_ENTRY(type)						\
++struct {								\
++	struct type *sqe_next;	/* next element */			\
++}
++
++/*
++ * Simple queue access methods.
++ */
++#define DWC_SIMPLEQ_FIRST(head)	    ((head)->sqh_first)
++#define DWC_SIMPLEQ_END(head)	    NULL
++#define DWC_SIMPLEQ_EMPTY(head)	    (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head))
++#define DWC_SIMPLEQ_NEXT(elm, field)    ((elm)->field.sqe_next)
++
++#define DWC_SIMPLEQ_FOREACH(var, head, field)				\
++	for((var) = SIMPLEQ_FIRST(head);				\
++	    (var) != SIMPLEQ_END(head);					\
++	    (var) = SIMPLEQ_NEXT(var, field))
++
++/*
++ * Simple queue functions.
++ */
++#define DWC_SIMPLEQ_INIT(head) do {					\
++	(head)->sqh_first = NULL;					\
++	(head)->sqh_last = &(head)->sqh_first;				\
++} while (0)
++
++#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do {			\
++	if (((elm)->field.sqe_next = (head)->sqh_first) == NULL)	\
++		(head)->sqh_last = &(elm)->field.sqe_next;		\
++	(head)->sqh_first = (elm);					\
++} while (0)
++
++#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do {			\
++	(elm)->field.sqe_next = NULL;					\
++	*(head)->sqh_last = (elm);					\
++	(head)->sqh_last = &(elm)->field.sqe_next;			\
++} while (0)
++
++#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do {	\
++	if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\
++		(head)->sqh_last = &(elm)->field.sqe_next;		\
++	(listelm)->field.sqe_next = (elm);				\
++} while (0)
++
++#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do {			\
++	if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \
++		(head)->sqh_last = &(head)->sqh_first;			\
++} while (0)
++
++/*
++ * Tail queue definitions.
++ */
++#define DWC_TAILQ_HEAD(name, type)					\
++struct name {								\
++	struct type *tqh_first;	/* first element */			\
++	struct type **tqh_last;	/* addr of last next element */		\
++}
++
++#define DWC_TAILQ_HEAD_INITIALIZER(head)				\
++	{ NULL, &(head).tqh_first }
++
++#define DWC_TAILQ_ENTRY(type)						\
++struct {								\
++	struct type *tqe_next;	/* next element */			\
++	struct type **tqe_prev;	/* address of previous next element */	\
++}
++
++/*
++ * tail queue access methods
++ */
++#define DWC_TAILQ_FIRST(head)		((head)->tqh_first)
++#define DWC_TAILQ_END(head)		NULL
++#define DWC_TAILQ_NEXT(elm, field)	((elm)->field.tqe_next)
++#define DWC_TAILQ_LAST(head, headname)					\
++	(*(((struct headname *)((head)->tqh_last))->tqh_last))
++/* XXX */
++#define DWC_TAILQ_PREV(elm, headname, field)				\
++	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
++#define DWC_TAILQ_EMPTY(head)						\
++	(DWC_TAILQ_FIRST(head) == DWC_TAILQ_END(head))
++
++#define DWC_TAILQ_FOREACH(var, head, field)				\
++	for ((var) = DWC_TAILQ_FIRST(head);				\
++	    (var) != DWC_TAILQ_END(head);				\
++	    (var) = DWC_TAILQ_NEXT(var, field))
++
++#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field)		\
++	for ((var) = DWC_TAILQ_LAST(head, headname);			\
++	    (var) != DWC_TAILQ_END(head);				\
++	    (var) = DWC_TAILQ_PREV(var, headname, field))
++
++/*
++ * Tail queue functions.
++ */
++#define DWC_TAILQ_INIT(head) do {					\
++	(head)->tqh_first = NULL;					\
++	(head)->tqh_last = &(head)->tqh_first;				\
++} while (0)
++
++#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do {			\
++	if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)	\
++		(head)->tqh_first->field.tqe_prev =			\
++		    &(elm)->field.tqe_next;				\
++	else								\
++		(head)->tqh_last = &(elm)->field.tqe_next;		\
++	(head)->tqh_first = (elm);					\
++	(elm)->field.tqe_prev = &(head)->tqh_first;			\
++} while (0)
++
++#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do {			\
++	(elm)->field.tqe_next = NULL;					\
++	(elm)->field.tqe_prev = (head)->tqh_last;			\
++	*(head)->tqh_last = (elm);					\
++	(head)->tqh_last = &(elm)->field.tqe_next;			\
++} while (0)
++
++#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
++	if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
++		(elm)->field.tqe_next->field.tqe_prev =			\
++		    &(elm)->field.tqe_next;				\
++	else								\
++		(head)->tqh_last = &(elm)->field.tqe_next;		\
++	(listelm)->field.tqe_next = (elm);				\
++	(elm)->field.tqe_prev = &(listelm)->field.tqe_next;		\
++} while (0)
++
++#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do {		\
++	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
++	(elm)->field.tqe_next = (listelm);				\
++	*(listelm)->field.tqe_prev = (elm);				\
++	(listelm)->field.tqe_prev = &(elm)->field.tqe_next;		\
++} while (0)
++
++#define DWC_TAILQ_REMOVE(head, elm, field) do {				\
++	if (((elm)->field.tqe_next) != NULL)				\
++		(elm)->field.tqe_next->field.tqe_prev =			\
++		    (elm)->field.tqe_prev;				\
++	else								\
++		(head)->tqh_last = (elm)->field.tqe_prev;		\
++	*(elm)->field.tqe_prev = (elm)->field.tqe_next;			\
++} while (0)
++
++#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do {			\
++	if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL)	\
++		(elm2)->field.tqe_next->field.tqe_prev =		\
++		    &(elm2)->field.tqe_next;				\
++	else								\
++		(head)->tqh_last = &(elm2)->field.tqe_next;		\
++	(elm2)->field.tqe_prev = (elm)->field.tqe_prev;			\
++	*(elm2)->field.tqe_prev = (elm2);				\
++} while (0)
++
++/*
++ * Circular queue definitions.
++ */
++#define DWC_CIRCLEQ_HEAD(name, type)					\
++struct name {								\
++	struct type *cqh_first;		/* first element */		\
++	struct type *cqh_last;		/* last element */		\
++}
++
++#define DWC_CIRCLEQ_HEAD_INITIALIZER(head)				\
++	{ DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) }
++
++#define DWC_CIRCLEQ_ENTRY(type)						\
++struct {								\
++	struct type *cqe_next;		/* next element */		\
++	struct type *cqe_prev;		/* previous element */		\
++}
++
++/*
++ * Circular queue access methods
++ */
++#define DWC_CIRCLEQ_FIRST(head)		((head)->cqh_first)
++#define DWC_CIRCLEQ_LAST(head)		((head)->cqh_last)
++#define DWC_CIRCLEQ_END(head)		((void *)(head))
++#define DWC_CIRCLEQ_NEXT(elm, field)	((elm)->field.cqe_next)
++#define DWC_CIRCLEQ_PREV(elm, field)	((elm)->field.cqe_prev)
++#define DWC_CIRCLEQ_EMPTY(head)						\
++	(DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head))
++
++#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL))
++
++#define DWC_CIRCLEQ_FOREACH(var, head, field)				\
++	for((var) = DWC_CIRCLEQ_FIRST(head);				\
++	    (var) != DWC_CIRCLEQ_END(head);				\
++	    (var) = DWC_CIRCLEQ_NEXT(var, field))
++
++#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field)			\
++	for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \
++	    (var) != DWC_CIRCLEQ_END(head);					\
++	    (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field))
++
++#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field)			\
++	for((var) = DWC_CIRCLEQ_LAST(head);				\
++	    (var) != DWC_CIRCLEQ_END(head);				\
++	    (var) = DWC_CIRCLEQ_PREV(var, field))
++
++/*
++ * Circular queue functions.
++ */
++#define DWC_CIRCLEQ_INIT(head) do {					\
++	(head)->cqh_first = DWC_CIRCLEQ_END(head);			\
++	(head)->cqh_last = DWC_CIRCLEQ_END(head);			\
++} while (0)
++
++#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do {				\
++	(elm)->field.cqe_next = NULL;					\
++	(elm)->field.cqe_prev = NULL;					\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do {	\
++	(elm)->field.cqe_next = (listelm)->field.cqe_next;		\
++	(elm)->field.cqe_prev = (listelm);				\
++	if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_last = (elm);				\
++	else								\
++		(listelm)->field.cqe_next->field.cqe_prev = (elm);	\
++	(listelm)->field.cqe_next = (elm);				\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do {	\
++	(elm)->field.cqe_next = (listelm);				\
++	(elm)->field.cqe_prev = (listelm)->field.cqe_prev;		\
++	if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_first = (elm);				\
++	else								\
++		(listelm)->field.cqe_prev->field.cqe_next = (elm);	\
++	(listelm)->field.cqe_prev = (elm);				\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do {			\
++	(elm)->field.cqe_next = (head)->cqh_first;			\
++	(elm)->field.cqe_prev = DWC_CIRCLEQ_END(head);			\
++	if ((head)->cqh_last == DWC_CIRCLEQ_END(head))			\
++		(head)->cqh_last = (elm);				\
++	else								\
++		(head)->cqh_first->field.cqe_prev = (elm);		\
++	(head)->cqh_first = (elm);					\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do {			\
++	(elm)->field.cqe_next = DWC_CIRCLEQ_END(head);			\
++	(elm)->field.cqe_prev = (head)->cqh_last;			\
++	if ((head)->cqh_first == DWC_CIRCLEQ_END(head))			\
++		(head)->cqh_first = (elm);				\
++	else								\
++		(head)->cqh_last->field.cqe_next = (elm);		\
++	(head)->cqh_last = (elm);					\
++} while (0)
++
++#define DWC_CIRCLEQ_REMOVE(head, elm, field) do {			\
++	if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_last = (elm)->field.cqe_prev;		\
++	else								\
++		(elm)->field.cqe_next->field.cqe_prev =			\
++		    (elm)->field.cqe_prev;				\
++	if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_first = (elm)->field.cqe_next;		\
++	else								\
++		(elm)->field.cqe_prev->field.cqe_next =			\
++		    (elm)->field.cqe_next;				\
++} while (0)
++
++#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do {			\
++	DWC_CIRCLEQ_REMOVE(head, elm, field);				\
++	DWC_CIRCLEQ_INIT_ENTRY(elm, field);				\
++} while (0)
++
++#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do {		\
++	if (((elm2)->field.cqe_next = (elm)->field.cqe_next) ==		\
++	    DWC_CIRCLEQ_END(head))					\
++		(head).cqh_last = (elm2);				\
++	else								\
++		(elm2)->field.cqe_next->field.cqe_prev = (elm2);	\
++	if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) ==		\
++	    DWC_CIRCLEQ_END(head))					\
++		(head).cqh_first = (elm2);				\
++	else								\
++		(elm2)->field.cqe_prev->field.cqe_next = (elm2);	\
++} while (0)
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_LIST_H_ */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_mem.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_mem.c
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_mem.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_mem.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,245 @@
++/* Memory Debugging */
++#ifdef DWC_DEBUG_MEMORY
++
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++struct allocation {
++	void *addr;
++	void *ctx;
++	char *func;
++	int line;
++	uint32_t size;
++	int dma;
++	DWC_CIRCLEQ_ENTRY(allocation) entry;
++};
++
++DWC_CIRCLEQ_HEAD(allocation_queue, allocation);
++
++struct allocation_manager {
++	void *mem_ctx;
++	struct allocation_queue allocations;
++
++	/* statistics */
++	int num;
++	int num_freed;
++	int num_active;
++	uint32_t total;
++	uint32_t cur;
++	uint32_t max;
++};
++
++static struct allocation_manager *manager = NULL;
++
++static int add_allocation(void *ctx, uint32_t size, char const *func, int line, void *addr,
++			  int dma)
++{
++	struct allocation *a;
++
++	DWC_ASSERT(manager != NULL, "manager not allocated");
++
++	a = __DWC_ALLOC_ATOMIC(manager->mem_ctx, sizeof(*a));
++	if (!a) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	a->func = __DWC_ALLOC_ATOMIC(manager->mem_ctx, DWC_STRLEN(func) + 1);
++	if (!a->func) {
++		__DWC_FREE(manager->mem_ctx, a);
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_MEMCPY(a->func, func, DWC_STRLEN(func) + 1);
++	a->addr = addr;
++	a->ctx = ctx;
++	a->line = line;
++	a->size = size;
++	a->dma = dma;
++	DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry);
++
++	/* Update stats */
++	manager->num++;
++	manager->num_active++;
++	manager->total += size;
++	manager->cur += size;
++
++	if (manager->max < manager->cur) {
++		manager->max = manager->cur;
++	}
++
++	return 0;
++}
++
++static struct allocation *find_allocation(void *ctx, void *addr)
++{
++	struct allocation *a;
++
++	DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
++		if (a->ctx == ctx && a->addr == addr) {
++			return a;
++		}
++	}
++
++	return NULL;
++}
++
++static void free_allocation(void *ctx, void *addr, char const *func, int line)
++{
++	struct allocation *a = find_allocation(ctx, addr);
++
++	if (!a) {
++		DWC_ASSERT(0,
++			   "Free of address %p that was never allocated or already freed %s:%d",
++			   addr, func, line);
++		return;
++	}
++
++	DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry);
++
++	manager->num_active--;
++	manager->num_freed++;
++	manager->cur -= a->size;
++	__DWC_FREE(manager->mem_ctx, a->func);
++	__DWC_FREE(manager->mem_ctx, a);
++}
++
++int dwc_memory_debug_start(void *mem_ctx)
++{
++	DWC_ASSERT(manager == NULL, "Memory debugging has already started\n");
++
++	if (manager) {
++		return -DWC_E_BUSY;
++	}
++
++	manager = __DWC_ALLOC(mem_ctx, sizeof(*manager));
++	if (!manager) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_CIRCLEQ_INIT(&manager->allocations);
++	manager->mem_ctx = mem_ctx;
++	manager->num = 0;
++	manager->num_freed = 0;
++	manager->num_active = 0;
++	manager->total = 0;
++	manager->cur = 0;
++	manager->max = 0;
++
++	return 0;
++}
++
++void dwc_memory_debug_stop(void)
++{
++	struct allocation *a;
++
++	dwc_memory_debug_report();
++
++	DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
++		DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line);
++		free_allocation(a->ctx, a->addr, NULL, -1);
++	}
++
++	__DWC_FREE(manager->mem_ctx, manager);
++}
++
++void dwc_memory_debug_report(void)
++{
++	struct allocation *a;
++
++	DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n");
++	DWC_PRINTF("Num Allocations = %d\n", manager->num);
++	DWC_PRINTF("Freed = %d\n", manager->num_freed);
++	DWC_PRINTF("Active = %d\n", manager->num_active);
++	DWC_PRINTF("Current Memory Used = %d\n", manager->cur);
++	DWC_PRINTF("Total Memory Used = %d\n", manager->total);
++	DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max);
++	DWC_PRINTF("Unfreed allocations:\n");
++
++	DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
++		DWC_PRINTF("    addr=%p, size=%d from %s:%d, DMA=%d\n",
++			   a->addr, a->size, a->func, a->line, a->dma);
++	}
++}
++
++/* The replacement functions */
++void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line)
++{
++	void *addr = __DWC_ALLOC(mem_ctx, size);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(mem_ctx, size, func, line, addr, 0)) {
++		__DWC_FREE(mem_ctx, addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func,
++			     int line)
++{
++	void *addr = __DWC_ALLOC_ATOMIC(mem_ctx, size);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(mem_ctx, size, func, line, addr, 0)) {
++		__DWC_FREE(mem_ctx, addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line)
++{
++	free_allocation(mem_ctx, addr, func, line);
++	__DWC_FREE(mem_ctx, addr);
++}
++
++void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
++			  char const *func, int line)
++{
++	void *addr = __DWC_DMA_ALLOC(dma_ctx, size, dma_addr);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(dma_ctx, size, func, line, addr, 1)) {
++		__DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size,
++				 dwc_dma_t *dma_addr, char const *func, int line)
++{
++	void *addr = __DWC_DMA_ALLOC_ATOMIC(dma_ctx, size, dma_addr);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(dma_ctx, size, func, line, addr, 1)) {
++		__DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr,
++			dwc_dma_t dma_addr, char const *func, int line)
++{
++	free_allocation(dma_ctx, virt_addr, func, line);
++	__DWC_DMA_FREE(dma_ctx, size, virt_addr, dma_addr);
++}
++
++#endif /* DWC_DEBUG_MEMORY */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_modpow.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_modpow.c
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_modpow.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_modpow.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,636 @@
++/* Bignum routines adapted from PUTTY sources.  PuTTY copyright notice follows.
++ *
++ * PuTTY is copyright 1997-2007 Simon Tatham.
++ *
++ * Portions copyright Robert de Bath, Joris van Rantwijk, Delian
++ * Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry,
++ * Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus
++ * Kuhn, and CORE SDI S.A.
++ *
++ * Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation files
++ * (the "Software"), to deal in the Software without restriction,
++ * including without limitation the rights to use, copy, modify, merge,
++ * publish, distribute, sublicense, and/or sell copies of the Software,
++ * and to permit persons to whom the Software is furnished to do so,
++ * subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT.  IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE
++ * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
++ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
++ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++ *
++ */
++#ifdef DWC_CRYPTOLIB
++
++#ifndef CONFIG_MACH_IPMATE
++
++#include "dwc_modpow.h"
++
++#define BIGNUM_INT_MASK  0xFFFFFFFFUL
++#define BIGNUM_TOP_BIT   0x80000000UL
++#define BIGNUM_INT_BITS  32
++
++
++static void *snmalloc(void *mem_ctx, size_t n, size_t size)
++{
++    void *p;
++    size *= n;
++    if (size == 0) size = 1;
++    p = dwc_alloc(mem_ctx, size);
++    return p;
++}
++
++#define snewn(ctx, n, type) ((type *)snmalloc((ctx), (n), sizeof(type)))
++#define sfree dwc_free
++
++/*
++ * Usage notes:
++ *  * Do not call the DIVMOD_WORD macro with expressions such as array
++ *    subscripts, as some implementations object to this (see below).
++ *  * Note that none of the division methods below will cope if the
++ *    quotient won't fit into BIGNUM_INT_BITS. Callers should be careful
++ *    to avoid this case.
++ *    If this condition occurs, in the case of the x86 DIV instruction,
++ *    an overflow exception will occur, which (according to a correspondent)
++ *    will manifest on Windows as something like
++ *      0xC0000095: Integer overflow
++ *    The C variant won't give the right answer, either.
++ */
++
++#define MUL_WORD(w1, w2) ((BignumDblInt)w1 * w2)
++
++#if defined __GNUC__ && defined __i386__
++#define DIVMOD_WORD(q, r, hi, lo, w) \
++    __asm__("div %2" : \
++	    "=d" (r), "=a" (q) : \
++	    "r" (w), "d" (hi), "a" (lo))
++#else
++#define DIVMOD_WORD(q, r, hi, lo, w) do { \
++    BignumDblInt n = (((BignumDblInt)hi) << BIGNUM_INT_BITS) | lo; \
++    q = n / w; \
++    r = n % w; \
++} while (0)
++#endif
++
++//    q = n / w;                                
++//    r = n % w;                                
++
++#define BIGNUM_INT_BYTES (BIGNUM_INT_BITS / 8)
++
++#define BIGNUM_INTERNAL
++
++static Bignum newbn(void *mem_ctx, int length)
++{
++    Bignum b = snewn(mem_ctx, length + 1, BignumInt);
++    //if (!b)
++    //abort();		       /* FIXME */
++    DWC_MEMSET(b, 0, (length + 1) * sizeof(*b));
++    b[0] = length;
++    return b;
++}
++
++void freebn(void *mem_ctx, Bignum b)
++{
++    /*
++     * Burn the evidence, just in case.
++     */
++    DWC_MEMSET(b, 0, sizeof(b[0]) * (b[0] + 1));
++    sfree(mem_ctx, b);
++}
++
++/*
++ * Compute c = a * b.
++ * Input is in the first len words of a and b.
++ * Result is returned in the first 2*len words of c.
++ */
++static void internal_mul(BignumInt *a, BignumInt *b,
++			 BignumInt *c, int len)
++{
++    int i, j;
++    BignumDblInt t;
++
++    for (j = 0; j < 2 * len; j++)
++	c[j] = 0;
++
++    for (i = len - 1; i >= 0; i--) {
++	t = 0;
++	for (j = len - 1; j >= 0; j--) {
++	    t += MUL_WORD(a[i], (BignumDblInt) b[j]);
++	    t += (BignumDblInt) c[i + j + 1];
++	    c[i + j + 1] = (BignumInt) t;
++	    t = t >> BIGNUM_INT_BITS;
++	}
++	c[i] = (BignumInt) t;
++    }
++}
++
++static void internal_add_shifted(BignumInt *number,
++				 unsigned n, int shift)
++{
++    int word = 1 + (shift / BIGNUM_INT_BITS);
++    int bshift = shift % BIGNUM_INT_BITS;
++    BignumDblInt addend;
++
++    addend = (BignumDblInt)n << bshift;
++
++    while (addend) {
++	addend += number[word];
++	number[word] = (BignumInt) addend & BIGNUM_INT_MASK;
++	addend >>= BIGNUM_INT_BITS;
++	word++;
++    }
++}
++
++/*
++ * Compute a = a % m.
++ * Input in first alen words of a and first mlen words of m.
++ * Output in first alen words of a
++ * (of which first alen-mlen words will be zero).
++ * The MSW of m MUST have its high bit set.
++ * Quotient is accumulated in the `quotient' array, which is a Bignum
++ * rather than the internal bigendian format. Quotient parts are shifted
++ * left by `qshift' before adding into quot.
++ */
++static void internal_mod(BignumInt *a, int alen,
++			 BignumInt *m, int mlen,
++			 BignumInt *quot, int qshift)
++{
++    BignumInt m0, m1;
++    unsigned int h;
++    int i, k;
++
++    m0 = m[0];
++    if (mlen > 1)
++	m1 = m[1];
++    else
++	m1 = 0;
++
++    for (i = 0; i <= alen - mlen; i++) {
++	BignumDblInt t;
++	unsigned int q, r, c, ai1;
++
++	if (i == 0) {
++	    h = 0;
++	} else {
++	    h = a[i - 1];
++	    a[i - 1] = 0;
++	}
++
++	if (i == alen - 1)
++	    ai1 = 0;
++	else
++	    ai1 = a[i + 1];
++
++	/* Find q = h:a[i] / m0 */
++	if (h >= m0) {
++	    /*
++	     * Special case.
++	     * 
++	     * To illustrate it, suppose a BignumInt is 8 bits, and
++	     * we are dividing (say) A1:23:45:67 by A1:B2:C3. Then
++	     * our initial division will be 0xA123 / 0xA1, which
++	     * will give a quotient of 0x100 and a divide overflow.
++	     * However, the invariants in this division algorithm
++	     * are not violated, since the full number A1:23:... is
++	     * _less_ than the quotient prefix A1:B2:... and so the
++	     * following correction loop would have sorted it out.
++	     * 
++	     * In this situation we set q to be the largest
++	     * quotient we _can_ stomach (0xFF, of course).
++	     */
++	    q = BIGNUM_INT_MASK;
++	} else {
++	    /* Macro doesn't want an array subscript expression passed
++	     * into it (see definition), so use a temporary. */
++	    BignumInt tmplo = a[i];
++	    DIVMOD_WORD(q, r, h, tmplo, m0);
++
++	    /* Refine our estimate of q by looking at
++	     h:a[i]:a[i+1] / m0:m1 */
++	    t = MUL_WORD(m1, q);
++	    if (t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) {
++		q--;
++		t -= m1;
++		r = (r + m0) & BIGNUM_INT_MASK;     /* overflow? */
++		if (r >= (BignumDblInt) m0 &&
++		    t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) q--;
++	    }
++	}
++
++	/* Subtract q * m from a[i...] */
++	c = 0;
++	for (k = mlen - 1; k >= 0; k--) {
++	    t = MUL_WORD(q, m[k]);
++	    t += c;
++	    c = (unsigned)(t >> BIGNUM_INT_BITS);
++	    if ((BignumInt) t > a[i + k])
++		c++;
++	    a[i + k] -= (BignumInt) t;
++	}
++
++	/* Add back m in case of borrow */
++	if (c != h) {
++	    t = 0;
++	    for (k = mlen - 1; k >= 0; k--) {
++		t += m[k];
++		t += a[i + k];
++		a[i + k] = (BignumInt) t;
++		t = t >> BIGNUM_INT_BITS;
++	    }
++	    q--;
++	}
++	if (quot)
++	    internal_add_shifted(quot, q, qshift + BIGNUM_INT_BITS * (alen - mlen - i));
++    }
++}
++
++/*
++ * Compute p % mod.
++ * The most significant word of mod MUST be non-zero.
++ * We assume that the result array is the same size as the mod array.
++ * We optionally write out a quotient if `quotient' is non-NULL.
++ * We can avoid writing out the result if `result' is NULL.
++ */
++void bigdivmod(void *mem_ctx, Bignum p, Bignum mod, Bignum result, Bignum quotient)
++{
++    BignumInt *n, *m;
++    int mshift;
++    int plen, mlen, i, j;
++
++    /* Allocate m of size mlen, copy mod to m */
++    /* We use big endian internally */
++    mlen = mod[0];
++    m = snewn(mem_ctx, mlen, BignumInt);
++    //if (!m)
++    //abort();		       /* FIXME */
++    for (j = 0; j < mlen; j++)
++	m[j] = mod[mod[0] - j];
++
++    /* Shift m left to make msb bit set */
++    for (mshift = 0; mshift < BIGNUM_INT_BITS-1; mshift++)
++	if ((m[0] << mshift) & BIGNUM_TOP_BIT)
++	    break;
++    if (mshift) {
++	for (i = 0; i < mlen - 1; i++)
++	    m[i] = (m[i] << mshift) | (m[i + 1] >> (BIGNUM_INT_BITS - mshift));
++	m[mlen - 1] = m[mlen - 1] << mshift;
++    }
++
++    plen = p[0];
++    /* Ensure plen > mlen */
++    if (plen <= mlen)
++	plen = mlen + 1;
++
++    /* Allocate n of size plen, copy p to n */
++    n = snewn(mem_ctx, plen, BignumInt);
++    //if (!n)
++    //abort();		       /* FIXME */
++    for (j = 0; j < plen; j++)
++	n[j] = 0;
++    for (j = 1; j <= (int)p[0]; j++)
++	n[plen - j] = p[j];
++
++    /* Main computation */
++    internal_mod(n, plen, m, mlen, quotient, mshift);
++
++    /* Fixup result in case the modulus was shifted */
++    if (mshift) {
++	for (i = plen - mlen - 1; i < plen - 1; i++)
++	    n[i] = (n[i] << mshift) | (n[i + 1] >> (BIGNUM_INT_BITS - mshift));
++	n[plen - 1] = n[plen - 1] << mshift;
++	internal_mod(n, plen, m, mlen, quotient, 0);
++	for (i = plen - 1; i >= plen - mlen; i--)
++	    n[i] = (n[i] >> mshift) | (n[i - 1] << (BIGNUM_INT_BITS - mshift));
++    }
++
++    /* Copy result to buffer */
++    if (result) {
++	for (i = 1; i <= (int)result[0]; i++) {
++	    int j = plen - i;
++	    result[i] = j >= 0 ? n[j] : 0;
++	}
++    }
++
++    /* Free temporary arrays */
++    for (i = 0; i < mlen; i++)
++	m[i] = 0;
++    sfree(mem_ctx, m);
++    for (i = 0; i < plen; i++)
++	n[i] = 0;
++    sfree(mem_ctx, n);
++}
++
++/*
++ * Simple remainder.
++ */
++Bignum bigmod(void *mem_ctx, Bignum a, Bignum b)
++{
++    Bignum r = newbn(mem_ctx, b[0]);
++    bigdivmod(mem_ctx, a, b, r, NULL);
++    return r;
++}
++
++/*
++ * Compute (base ^ exp) % mod.
++ */
++Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod)
++{
++    BignumInt *a, *b, *n, *m;
++    int mshift;
++    int mlen, i, j;
++    Bignum base, result;
++
++    /*
++     * The most significant word of mod needs to be non-zero. It
++     * should already be, but let's make sure.
++     */
++    //assert(mod[mod[0]] != 0);
++
++    /*
++     * Make sure the base is smaller than the modulus, by reducing
++     * it modulo the modulus if not.
++     */
++    base = bigmod(mem_ctx, base_in, mod);
++
++    /* Allocate m of size mlen, copy mod to m */
++    /* We use big endian internally */
++    mlen = mod[0];
++    m = snewn(mem_ctx, mlen, BignumInt);
++    //if (!m)
++    //abort();		       /* FIXME */
++    for (j = 0; j < mlen; j++)
++	m[j] = mod[mod[0] - j];
++
++    /* Shift m left to make msb bit set */
++    for (mshift = 0; mshift < BIGNUM_INT_BITS - 1; mshift++)
++	if ((m[0] << mshift) & BIGNUM_TOP_BIT)
++	    break;
++    if (mshift) {
++	for (i = 0; i < mlen - 1; i++)
++	    m[i] =
++		(m[i] << mshift) | (m[i + 1] >>
++				    (BIGNUM_INT_BITS - mshift));
++	m[mlen - 1] = m[mlen - 1] << mshift;
++    }
++
++    /* Allocate n of size mlen, copy base to n */
++    n = snewn(mem_ctx, mlen, BignumInt);
++    //if (!n)
++    //abort();		       /* FIXME */
++    i = mlen - base[0];
++    for (j = 0; j < i; j++)
++	n[j] = 0;
++    for (j = 0; j < base[0]; j++)
++	n[i + j] = base[base[0] - j];
++
++    /* Allocate a and b of size 2*mlen. Set a = 1 */
++    a = snewn(mem_ctx, 2 * mlen, BignumInt);
++    //if (!a)
++    //abort();		       /* FIXME */
++    b = snewn(mem_ctx, 2 * mlen, BignumInt);
++    //if (!b)
++    //abort();		       /* FIXME */
++    for (i = 0; i < 2 * mlen; i++)
++	a[i] = 0;
++    a[2 * mlen - 1] = 1;
++
++    /* Skip leading zero bits of exp. */
++    i = 0;
++    j = BIGNUM_INT_BITS - 1;
++    while (i < exp[0] && (exp[exp[0] - i] & (1 << j)) == 0) {
++	j--;
++	if (j < 0) {
++	    i++;
++	    j = BIGNUM_INT_BITS - 1;
++	}
++    }
++
++    /* Main computation */
++    while (i < exp[0]) {
++	while (j >= 0) {
++	    internal_mul(a + mlen, a + mlen, b, mlen);
++	    internal_mod(b, mlen * 2, m, mlen, NULL, 0);
++	    if ((exp[exp[0] - i] & (1 << j)) != 0) {
++		internal_mul(b + mlen, n, a, mlen);
++		internal_mod(a, mlen * 2, m, mlen, NULL, 0);
++	    } else {
++		BignumInt *t;
++		t = a;
++		a = b;
++		b = t;
++	    }
++	    j--;
++	}
++	i++;
++	j = BIGNUM_INT_BITS - 1;
++    }
++
++    /* Fixup result in case the modulus was shifted */
++    if (mshift) {
++	for (i = mlen - 1; i < 2 * mlen - 1; i++)
++	    a[i] =
++		(a[i] << mshift) | (a[i + 1] >>
++				    (BIGNUM_INT_BITS - mshift));
++	a[2 * mlen - 1] = a[2 * mlen - 1] << mshift;
++	internal_mod(a, mlen * 2, m, mlen, NULL, 0);
++	for (i = 2 * mlen - 1; i >= mlen; i--)
++	    a[i] =
++		(a[i] >> mshift) | (a[i - 1] <<
++				    (BIGNUM_INT_BITS - mshift));
++    }
++
++    /* Copy result to buffer */
++    result = newbn(mem_ctx, mod[0]);
++    for (i = 0; i < mlen; i++)
++	result[result[0] - i] = a[i + mlen];
++    while (result[0] > 1 && result[result[0]] == 0)
++	result[0]--;
++
++    /* Free temporary arrays */
++    for (i = 0; i < 2 * mlen; i++)
++	a[i] = 0;
++    sfree(mem_ctx, a);
++    for (i = 0; i < 2 * mlen; i++)
++	b[i] = 0;
++    sfree(mem_ctx, b);
++    for (i = 0; i < mlen; i++)
++	m[i] = 0;
++    sfree(mem_ctx, m);
++    for (i = 0; i < mlen; i++)
++	n[i] = 0;
++    sfree(mem_ctx, n);
++
++    freebn(mem_ctx, base);
++
++    return result;
++}
++
++
++#ifdef UNITTEST
++
++static __u32 dh_p[] = {
++	96,
++	0xFFFFFFFF,
++	0xFFFFFFFF,
++	0xA93AD2CA,
++	0x4B82D120,
++	0xE0FD108E,
++	0x43DB5BFC,
++	0x74E5AB31,
++	0x08E24FA0,
++	0xBAD946E2,
++	0x770988C0,
++	0x7A615D6C,
++	0xBBE11757,
++	0x177B200C,
++	0x521F2B18,
++	0x3EC86A64,
++	0xD8760273,
++	0xD98A0864,
++	0xF12FFA06,
++	0x1AD2EE6B,
++	0xCEE3D226,
++	0x4A25619D,
++	0x1E8C94E0,
++	0xDB0933D7,
++	0xABF5AE8C,
++	0xA6E1E4C7,
++	0xB3970F85,
++	0x5D060C7D,
++	0x8AEA7157,
++	0x58DBEF0A,
++	0xECFB8504,
++	0xDF1CBA64,
++	0xA85521AB,
++	0x04507A33,
++	0xAD33170D,
++	0x8AAAC42D,
++	0x15728E5A,
++	0x98FA0510,
++	0x15D22618,
++	0xEA956AE5,
++	0x3995497C,
++	0x95581718,
++	0xDE2BCBF6,
++	0x6F4C52C9,
++	0xB5C55DF0,
++	0xEC07A28F,
++	0x9B2783A2,
++	0x180E8603,
++	0xE39E772C,
++	0x2E36CE3B,
++	0x32905E46,
++	0xCA18217C,
++	0xF1746C08,
++	0x4ABC9804,
++	0x670C354E,
++	0x7096966D,
++	0x9ED52907,
++	0x208552BB,
++	0x1C62F356,
++	0xDCA3AD96,
++	0x83655D23,
++	0xFD24CF5F,
++	0x69163FA8,
++	0x1C55D39A,
++	0x98DA4836,
++	0xA163BF05,
++	0xC2007CB8,
++	0xECE45B3D,
++	0x49286651,
++	0x7C4B1FE6,
++	0xAE9F2411,
++	0x5A899FA5,
++	0xEE386BFB,
++	0xF406B7ED,
++	0x0BFF5CB6,
++	0xA637ED6B,
++	0xF44C42E9,
++	0x625E7EC6,
++	0xE485B576,
++	0x6D51C245,
++	0x4FE1356D,
++	0xF25F1437,
++	0x302B0A6D,
++	0xCD3A431B,
++	0xEF9519B3,
++	0x8E3404DD,
++	0x514A0879,
++	0x3B139B22,
++	0x020BBEA6,
++	0x8A67CC74,
++	0x29024E08,
++	0x80DC1CD1,
++	0xC4C6628B,
++	0x2168C234,
++	0xC90FDAA2,
++	0xFFFFFFFF,
++	0xFFFFFFFF,
++};
++
++static __u32 dh_a[] = {
++	8,
++	0xdf367516,
++	0x86459caa,
++	0xe2d459a4,
++	0xd910dae0,
++	0x8a8b5e37,
++	0x67ab31c6,
++	0xf0b55ea9,
++	0x440051d6,
++};
++
++static __u32 dh_b[] = {
++	8,
++	0xded92656,
++	0xe07a048a,
++	0x6fa452cd,
++	0x2df89d30,
++	0xc75f1b0f,
++	0x8ce3578f, 
++	0x7980a324,
++	0x5daec786,
++};
++
++static __u32 dh_g[] = {
++	1,
++	2,
++};
++
++int main(void)
++{
++	int i;
++	__u32 *k;
++	k = dwc_modpow(NULL, dh_g, dh_a, dh_p);
++
++	printf("\n\n");
++	for (i=0; i<k[0]; i++) {
++		__u32 word32 = k[k[0] - i];
++		__u16 l = word32 & 0xffff;
++		__u16 m = (word32 & 0xffff0000) >> 16;
++		printf("%04x %04x ", m, l);
++		if (!((i + 1)%13)) printf("\n");
++	}
++	printf("\n\n");
++
++	if ((k[0] == 0x60) && (k[1] == 0x28e490e5) && (k[0x60] == 0x5a0d3d4e)) {
++		printf("PASS\n\n");
++	}
++	else {
++		printf("FAIL\n\n");
++	}
++
++}
++
++#endif /* UNITTEST */
++
++#endif /* CONFIG_MACH_IPMATE */
++
++#endif /*DWC_CRYPTOLIB */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_modpow.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_modpow.h
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_modpow.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_modpow.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,34 @@
++/*
++ * dwc_modpow.h
++ * See dwc_modpow.c for license and changes
++ */
++#ifndef _DWC_MODPOW_H
++#define _DWC_MODPOW_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dwc_os.h"
++
++/** @file
++ *
++ * This file defines the module exponentiation function which is only used
++ * internally by the DWC UWB modules for calculation of PKs during numeric
++ * association.  The routine is taken from the PUTTY, an open source terminal
++ * emulator.  The PUTTY License is preserved in the dwc_modpow.c file.
++ *
++ */
++
++typedef uint32_t BignumInt;
++typedef uint64_t BignumDblInt;
++typedef BignumInt *Bignum;
++
++/* Compute modular exponentiaion */
++extern Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _LINUX_BIGNUM_H */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_notifier.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_notifier.c
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_notifier.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_notifier.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,319 @@
++#ifdef DWC_NOTIFYLIB
++
++#include "dwc_notifier.h"
++#include "dwc_list.h"
++
++typedef struct dwc_observer {
++	void *observer;
++	dwc_notifier_callback_t callback;
++	void *data;
++	char *notification;
++	DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry;
++} observer_t;
++
++DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer);
++
++typedef struct dwc_notifier {
++	void *mem_ctx;
++	void *object;
++	struct observer_queue observers;
++	DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry;
++} notifier_t;
++
++DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier);
++
++typedef struct manager {
++	void *mem_ctx;
++	void *wkq_ctx;
++	dwc_workq_t *wq;
++//	dwc_mutex_t *mutex;
++	struct notifier_queue notifiers;
++} manager_t;
++
++static manager_t *manager = NULL;
++
++static int create_manager(void *mem_ctx, void *wkq_ctx)
++{
++	manager = dwc_alloc(mem_ctx, sizeof(manager_t));
++	if (!manager) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_CIRCLEQ_INIT(&manager->notifiers);
++
++	manager->wq = dwc_workq_alloc(wkq_ctx, "DWC Notification WorkQ");
++	if (!manager->wq) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	return 0;
++}
++
++static void free_manager(void)
++{
++	dwc_workq_free(manager->wq);
++
++	/* All notifiers must have unregistered themselves before this module
++	 * can be removed.  Hitting this assertion indicates a programmer
++	 * error. */
++	DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers),
++		   "Notification manager being freed before all notifiers have been removed");
++	dwc_free(manager->mem_ctx, manager);
++}
++
++#ifdef DEBUG
++static void dump_manager(void)
++{
++	notifier_t *n;
++	observer_t *o;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	DWC_DEBUG("List of all notifiers and observers:\n");
++	DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) {
++		DWC_DEBUG("Notifier %p has observers:\n", n->object);
++		DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) {
++			DWC_DEBUG("    %p watching %s\n", o->observer, o->notification);
++		}
++	}
++}
++#else
++#define dump_manager(...)
++#endif
++
++static observer_t *alloc_observer(void *mem_ctx, void *observer, char *notification,
++				  dwc_notifier_callback_t callback, void *data)
++{
++	observer_t *new_observer = dwc_alloc(mem_ctx, sizeof(observer_t));
++
++	if (!new_observer) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry);
++	new_observer->observer = observer;
++	new_observer->notification = notification;
++	new_observer->callback = callback;
++	new_observer->data = data;
++	return new_observer;
++}
++
++static void free_observer(void *mem_ctx, observer_t *observer)
++{
++	dwc_free(mem_ctx, observer);
++}
++
++static notifier_t *alloc_notifier(void *mem_ctx, void *object)
++{
++	notifier_t *notifier;
++
++	if (!object) {
++		return NULL;
++	}
++
++	notifier = dwc_alloc(mem_ctx, sizeof(notifier_t));
++	if (!notifier) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INIT(&notifier->observers);
++	DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry);
++
++	notifier->mem_ctx = mem_ctx;
++	notifier->object = object;
++	return notifier;
++}
++
++static void free_notifier(notifier_t *notifier)
++{
++	observer_t *observer;
++
++	DWC_CIRCLEQ_FOREACH(observer, &notifier->observers, list_entry) {
++		free_observer(notifier->mem_ctx, observer);
++	}
++
++	dwc_free(notifier->mem_ctx, notifier);
++}
++
++static notifier_t *find_notifier(void *object)
++{
++	notifier_t *notifier;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	if (!object) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) {
++		if (notifier->object == object) {
++			return notifier;
++		}
++	}
++
++	return NULL;
++}
++
++int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx)
++{
++	return create_manager(mem_ctx, wkq_ctx);
++}
++
++void dwc_free_notification_manager(void)
++{
++	free_manager();
++}
++
++dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object)
++{
++	notifier_t *notifier;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	notifier = find_notifier(object);
++	if (notifier) {
++		DWC_ERROR("Notifier %p is already registered\n", object);
++		return NULL;
++	}
++
++	notifier = alloc_notifier(mem_ctx, object);
++	if (!notifier) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry);
++
++	DWC_INFO("Notifier %p registered", object);
++	dump_manager();
++
++	return notifier;
++}
++
++void dwc_unregister_notifier(dwc_notifier_t *notifier)
++{
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	if (!DWC_CIRCLEQ_EMPTY(&notifier->observers)) {
++		observer_t *o;
++
++		DWC_ERROR("Notifier %p has active observers when removing\n", notifier->object);
++		DWC_CIRCLEQ_FOREACH(o, &notifier->observers, list_entry) {
++			DWC_DEBUGC("    %p watching %s\n", o->observer, o->notification);
++		}
++
++		DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&notifier->observers),
++			   "Notifier %p has active observers when removing", notifier);
++	}
++
++	DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry);
++	free_notifier(notifier);
++
++	DWC_INFO("Notifier unregistered");
++	dump_manager();
++}
++
++/* Add an observer to observe the notifier for a particular state, event, or notification. */
++int dwc_add_observer(void *observer, void *object, char *notification,
++		     dwc_notifier_callback_t callback, void *data)
++{
++	notifier_t *notifier = find_notifier(object);
++	observer_t *new_observer;
++
++	if (!notifier) {
++		DWC_ERROR("Notifier %p is not found when adding observer\n", object);
++		return -DWC_E_INVALID;
++	}
++
++	new_observer = alloc_observer(notifier->mem_ctx, observer, notification, callback, data);
++	if (!new_observer) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_CIRCLEQ_INSERT_TAIL(&notifier->observers, new_observer, list_entry);
++
++	DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p",
++		 observer, object, notification, callback, data);
++
++	dump_manager();
++	return 0;
++}
++
++int dwc_remove_observer(void *observer)
++{
++	notifier_t *n;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) {
++		observer_t *o;
++		observer_t *o2;
++
++		DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) {
++			if (o->observer == observer) {
++				DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry);
++				DWC_INFO("Removing observer %p from notifier %p watching notification %s:",
++					 o->observer, n->object, o->notification);
++				free_observer(n->mem_ctx, o);
++			}
++		}
++	}
++
++	dump_manager();
++	return 0;
++}
++
++typedef struct callback_data {
++	void *mem_ctx;
++	dwc_notifier_callback_t cb;
++	void *observer;
++	void *data;
++	void *object;
++	char *notification;
++	void *notification_data;
++} cb_data_t;
++
++static void cb_task(void *data)
++{
++	cb_data_t *cb = (cb_data_t *)data;
++
++	cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data);
++	dwc_free(cb->mem_ctx, cb);
++}
++
++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data)
++{
++	observer_t *o;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	DWC_CIRCLEQ_FOREACH(o, &notifier->observers, list_entry) {
++		int len = DWC_STRLEN(notification);
++
++		if (DWC_STRLEN(o->notification) != len) {
++			continue;
++		}
++
++		if (DWC_STRNCMP(o->notification, notification, len) == 0) {
++			cb_data_t *cb_data = dwc_alloc(notifier->mem_ctx, sizeof(cb_data_t));
++
++			if (!cb_data) {
++				DWC_ERROR("Failed to allocate callback data\n");
++				return;
++			}
++
++			cb_data->mem_ctx = notifier->mem_ctx;
++			cb_data->cb = o->callback;
++			cb_data->observer = o->observer;
++			cb_data->data = o->data;
++			cb_data->object = notifier->object;
++			cb_data->notification = notification;
++			cb_data->notification_data = notification_data;
++			DWC_DEBUGC("Observer found %p for notification %s\n", o->observer, notification);
++			DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data,
++					   "Notify callback from %p for Notification %s, to observer %p",
++					   cb_data->object, notification, cb_data->observer);
++		}
++	}
++}
++
++#endif	/* DWC_NOTIFYLIB */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_notifier.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_notifier.h
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_notifier.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_notifier.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,122 @@
++
++#ifndef __DWC_NOTIFIER_H__
++#define __DWC_NOTIFIER_H__
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dwc_os.h"
++
++/** @file
++ *
++ * A simple implementation of the Observer pattern.  Any "module" can
++ * register as an observer or notifier.  The notion of "module" is abstract and
++ * can mean anything used to identify either an observer or notifier.  Usually
++ * it will be a pointer to a data structure which contains some state, ie an
++ * object.
++ *
++ * Before any notifiers can be added, the global notification manager must be
++ * brought up with dwc_alloc_notification_manager().
++ * dwc_free_notification_manager() will bring it down and free all resources.
++ * These would typically be called upon module load and unload.  The
++ * notification manager is a single global instance that handles all registered
++ * observable modules and observers so this should be done only once.
++ *
++ * A module can be observable by using Notifications to publicize some general
++ * information about it's state or operation.  It does not care who listens, or
++ * even if anyone listens, or what they do with the information.  The observable
++ * modules do not need to know any information about it's observers or their
++ * interface, or their state or data.
++ *
++ * Any module can register to emit Notifications.  It should publish a list of
++ * notifications that it can emit and their behavior, such as when they will get
++ * triggered, and what information will be provided to the observer.  Then it
++ * should register itself as an observable module. See dwc_register_notifier().
++ *
++ * Any module can observe any observable, registered module, provided it has a
++ * handle to the other module and knows what notifications to observe.  See
++ * dwc_add_observer().
++ *
++ * A function of type dwc_notifier_callback_t is called whenever a notification
++ * is triggered with one or more observers observing it.  This function is
++ * called in it's own process so it may sleep or block if needed.  It is
++ * guaranteed to be called sometime after the notification has occurred and will
++ * be called once per each time the notification is triggered.  It will NOT be
++ * called in the same process context used to trigger the notification.
++ *
++ * @section Limitiations
++ *
++ * Keep in mind that Notifications that can be triggered in rapid sucession may
++ * schedule too many processes too handle.  Be aware of this limitation when
++ * designing to use notifications, and only add notifications for appropriate
++ * observable information.
++ *
++ * Also Notification callbacks are not synchronous.  If you need to synchronize
++ * the behavior between module/observer you must use other means.  And perhaps
++ * that will mean Notifications are not the proper solution.
++ */
++
++struct dwc_notifier;
++typedef struct dwc_notifier dwc_notifier_t;
++
++/** The callback function must be of this type.
++ *
++ * @param object This is the object that is being observed.
++ * @param notification This is the notification that was triggered.
++ * @param observer This is the observer
++ * @param notification_data This is notification-specific data that the notifier
++ * has included in this notification.  The value of this should be published in
++ * the documentation of the observable module with the notifications.
++ * @param user_data This is any custom data that the observer provided when
++ * adding itself as an observer to the notification. */
++typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer,
++					void *notification_data, void *user_data);
++
++/** Brings up the notification manager. */
++extern int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx);
++/** Brings down the notification manager. */
++extern void dwc_free_notification_manager(void);
++
++/** This function registers an observable module.  A dwc_notifier_t object is
++ * returned to the observable module.  This is an opaque object that is used by
++ * the observable module to trigger notifications.  This object should only be
++ * accessible to functions that are authorized to trigger notifications for this
++ * module.  Observers do not need this object. */
++extern dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object);
++
++/** This function unregisters an observable module.  All observers have to be
++ * removed prior to unregistration. */
++extern void dwc_unregister_notifier(dwc_notifier_t *notifier);
++
++/** Add a module as an observer to the observable module.  The observable module
++ * needs to have previously registered with the notification manager.
++ *
++ * @param observer The observer module
++ * @param object The module to observe
++ * @param notification The notification to observe
++ * @param callback The callback function to call
++ * @param user_data Any additional user data to pass into the callback function */
++extern int dwc_add_observer(void *observer, void *object, char *notification,
++			    dwc_notifier_callback_t callback, void *user_data);
++
++/** Removes the specified observer from all notifications that it is currently
++ * observing. */
++extern int dwc_remove_observer(void *observer);
++
++/** This function triggers a Notification.  It should be called by the
++ * observable module, or any module or library which the observable module
++ * allows to trigger notification on it's behalf.  Such as the dwc_cc_t.
++ *
++ * dwc_notify is a non-blocking function.  Callbacks are scheduled called in
++ * their own process context for each trigger.  Callbacks can be blocking.
++ * dwc_notify can be called from interrupt context if needed.
++ *
++ */
++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* __DWC_NOTIFIER_H__ */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_os.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_os.h
+--- linux-3.10/drivers/usb/host/dwc_common_port/dwc_os.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_os.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1262 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $
++ * $Revision: #14 $
++ * $Date: 2010/11/04 $
++ * $Change: 1621695 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifndef _DWC_OS_H_
++#define _DWC_OS_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * DWC portability library, low level os-wrapper functions
++ *
++ */
++
++/* These basic types need to be defined by some OS header file or custom header
++ * file for your specific target architecture.
++ *
++ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t
++ *
++ * Any custom or alternate header file must be added and enabled here.
++ */
++
++#ifdef DWC_LINUX
++# include <linux/types.h>
++# ifdef CONFIG_DEBUG_MUTEXES
++#  include <linux/mutex.h>
++# endif
++# include <linux/errno.h>
++# include <stdarg.h>
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++# include <os_dep.h>
++#endif
++
++
++/** @name Primitive Types and Values */
++
++/** We define a boolean type for consistency.  Can be either YES or NO */
++typedef uint8_t dwc_bool_t;
++#define YES  1
++#define NO   0
++
++#ifdef DWC_LINUX
++
++/** @name Error Codes */
++#define DWC_E_INVALID		EINVAL
++#define DWC_E_NO_MEMORY		ENOMEM
++#define DWC_E_NO_DEVICE		ENODEV
++#define DWC_E_NOT_SUPPORTED	EOPNOTSUPP
++#define DWC_E_TIMEOUT		ETIMEDOUT
++#define DWC_E_BUSY		EBUSY
++#define DWC_E_AGAIN		EAGAIN
++#define DWC_E_RESTART		ERESTART
++#define DWC_E_ABORT		ECONNABORTED
++#define DWC_E_SHUTDOWN		ESHUTDOWN
++#define DWC_E_NO_DATA		ENODATA
++#define DWC_E_DISCONNECT	ECONNRESET
++#define DWC_E_UNKNOWN		EINVAL
++#define DWC_E_NO_STREAM_RES	ENOSR
++#define DWC_E_COMMUNICATION	ECOMM
++#define DWC_E_OVERFLOW		EOVERFLOW
++#define DWC_E_PROTOCOL		EPROTO
++#define DWC_E_IN_PROGRESS	EINPROGRESS
++#define DWC_E_PIPE		EPIPE
++#define DWC_E_IO		EIO
++#define DWC_E_NO_SPACE		ENOSPC
++
++#else
++
++/** @name Error Codes */
++#define DWC_E_INVALID		1001
++#define DWC_E_NO_MEMORY		1002
++#define DWC_E_NO_DEVICE		1003
++#define DWC_E_NOT_SUPPORTED	1004
++#define DWC_E_TIMEOUT		1005
++#define DWC_E_BUSY		1006
++#define DWC_E_AGAIN		1007
++#define DWC_E_RESTART		1008
++#define DWC_E_ABORT		1009
++#define DWC_E_SHUTDOWN		1010
++#define DWC_E_NO_DATA		1011
++#define DWC_E_DISCONNECT	2000
++#define DWC_E_UNKNOWN		3000
++#define DWC_E_NO_STREAM_RES	4001
++#define DWC_E_COMMUNICATION	4002
++#define DWC_E_OVERFLOW		4003
++#define DWC_E_PROTOCOL		4004
++#define DWC_E_IN_PROGRESS	4005
++#define DWC_E_PIPE		4006
++#define DWC_E_IO		4007
++#define DWC_E_NO_SPACE		4008
++
++#endif
++
++
++/** @name Tracing/Logging Functions
++ *
++ * These function provide the capability to add tracing, debugging, and error
++ * messages, as well exceptions as assertions.  The WUDEV uses these
++ * extensively.  These could be logged to the main console, the serial port, an
++ * internal buffer, etc.  These functions could also be no-op if they are too
++ * expensive on your system.  By default undefining the DEBUG macro already
++ * no-ops some of these functions. */
++
++/** Returns non-zero if in interrupt context. */
++extern dwc_bool_t DWC_IN_IRQ(void);
++#define dwc_in_irq DWC_IN_IRQ
++
++/** Returns "IRQ" if DWC_IN_IRQ is true. */
++static inline char *dwc_irq(void) {
++	return DWC_IN_IRQ() ? "IRQ" : "";
++}
++
++/** Returns non-zero if in bottom-half context. */
++extern dwc_bool_t DWC_IN_BH(void);
++#define dwc_in_bh DWC_IN_BH
++
++/** Returns "BH" if DWC_IN_BH is true. */
++static inline char *dwc_bh(void) {
++	return DWC_IN_BH() ? "BH" : "";
++}
++
++/**
++ * A vprintf() clone.  Just call vprintf if you've got it.
++ */
++extern void DWC_VPRINTF(char *format, va_list args);
++#define dwc_vprintf DWC_VPRINTF
++
++/**
++ * A vsnprintf() clone.  Just call vprintf if you've got it.
++ */
++extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args);
++#define dwc_vsnprintf DWC_VSNPRINTF
++
++/**
++ * printf() clone.  Just call printf if you've go it.
++ */
++extern void DWC_PRINTF(char *format, ...)
++/* This provides compiler level static checking of the parameters if you're
++ * using GCC. */
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++#define dwc_printf DWC_PRINTF
++
++/**
++ * sprintf() clone.  Just call sprintf if you've got it.
++ */
++extern int DWC_SPRINTF(char *string, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 2, 3)));
++#else
++	;
++#endif
++#define dwc_sprintf DWC_SPRINTF
++
++/**
++ * snprintf() clone.  Just call snprintf if you've got it.
++ */
++extern int DWC_SNPRINTF(char *string, int size, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 3, 4)));
++#else
++	;
++#endif
++#define dwc_snprintf DWC_SNPRINTF
++
++/**
++ * Prints a WARNING message.  On systems that don't differentiate between
++ * warnings and regular log messages, just print it.  Indicates that something
++ * may be wrong with the driver.  Works like printf().
++ *
++ * Use the DWC_WARN macro to call this function.
++ */
++extern void __DWC_WARN(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++
++/**
++ * Prints an error message.  On systems that don't differentiate between errors
++ * and regular log messages, just print it.  Indicates that something went wrong
++ * with the driver.  Works like printf().
++ *
++ * Use the DWC_ERROR macro to call this function.
++ */
++extern void __DWC_ERROR(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++
++/**
++ * Prints an exception error message and takes some user-defined action such as
++ * print out a backtrace or trigger a breakpoint.  Indicates that something went
++ * abnormally wrong with the driver such as programmer error, or other
++ * exceptional condition.  It should not be ignored so even on systems without
++ * printing capability, some action should be taken to notify the developer of
++ * it.  Works like printf().
++ */
++extern void DWC_EXCEPTION(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++#define dwc_exception DWC_EXCEPTION
++
++#ifndef DWC_OTG_DEBUG_LEV
++#define DWC_OTG_DEBUG_LEV 0
++#endif
++   
++#ifdef DEBUG
++/**
++ * Prints out a debug message.  Used for logging/trace messages.
++ *
++ * Use the DWC_DEBUG macro to call this function
++ */
++extern void __DWC_DEBUG(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++#else
++#define __DWC_DEBUG printk
++#endif
++
++/**
++ * Prints out a Debug message.
++ */
++#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", \
++						 __func__, dwc_irq(), ## _args)
++#define dwc_debug DWC_DEBUG
++/**
++ * Prints out a Debug message if enabled at compile time.
++ */
++#if DWC_OTG_DEBUG_LEV > 0
++#define DWC_DEBUGC(_format, _args...) DWC_DEBUG(_format, ##_args )
++#else
++#define DWC_DEBUGC(_format, _args...)
++#endif
++#define dwc_debugc DWC_DEBUGC
++/**
++ * Prints out an informative message.
++ */
++#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", \
++					       dwc_irq(), ## _args)
++#define dwc_info DWC_INFO
++/**
++ * Prints out an informative message if enabled at compile time.
++ */
++#if DWC_OTG_DEBUG_LEV > 1
++#define DWC_INFOC(_format, _args...) DWC_INFO(_format, ##_args )
++#else
++#define DWC_INFOC(_format, _args...)
++#endif
++#define dwc_infoc DWC_INFOC
++/**
++ * Prints out a warning message.
++ */
++#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", \
++					dwc_irq(), __func__, __LINE__, ## _args)
++#define dwc_warn DWC_WARN
++/**
++ * Prints out an error message.
++ */
++#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", \
++					dwc_irq(), __func__, __LINE__, ## _args)
++#define dwc_error DWC_ERROR
++
++#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", \
++						dwc_irq(), __func__, __LINE__, ## _args)
++#define dwc_proto_error DWC_PROTO_ERROR
++
++#ifdef DEBUG
++/** Prints out a exception error message if the _expr expression fails.  Disabled
++ * if DEBUG is not enabled. */
++#define DWC_ASSERT(_expr, _format, _args...) do { \
++	if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), \
++				      __FILE__, __LINE__, ## _args); } \
++	} while (0)
++#else
++#define DWC_ASSERT(_x...)
++#endif
++#define dwc_assert DWC_ASSERT
++
++
++/** @name Byte Ordering
++ * The following functions are for conversions between processor's byte ordering
++ * and specific ordering you want.
++ */
++
++/** Converts 32 bit data in CPU byte ordering to little endian. */
++extern uint32_t DWC_CPU_TO_LE32(uint32_t *p);
++#define dwc_cpu_to_le32 DWC_CPU_TO_LE32
++
++/** Converts 32 bit data in CPU byte orderint to big endian. */
++extern uint32_t DWC_CPU_TO_BE32(uint32_t *p);
++#define dwc_cpu_to_be32 DWC_CPU_TO_BE32
++
++/** Converts 32 bit little endian data to CPU byte ordering. */
++extern uint32_t DWC_LE32_TO_CPU(uint32_t *p);
++#define dwc_le32_to_cpu DWC_LE32_TO_CPU
++
++/** Converts 32 bit big endian data to CPU byte ordering. */
++extern uint32_t DWC_BE32_TO_CPU(uint32_t *p);
++#define dwc_be32_to_cpu DWC_BE32_TO_CPU
++
++/** Converts 16 bit data in CPU byte ordering to little endian. */
++extern uint16_t DWC_CPU_TO_LE16(uint16_t *p);
++#define dwc_cpu_to_le16 DWC_CPU_TO_LE16
++
++/** Converts 16 bit data in CPU byte orderint to big endian. */
++extern uint16_t DWC_CPU_TO_BE16(uint16_t *p);
++#define dwc_cpu_to_be16 DWC_CPU_TO_BE16
++
++/** Converts 16 bit little endian data to CPU byte ordering. */
++extern uint16_t DWC_LE16_TO_CPU(uint16_t *p);
++#define dwc_le16_to_cpu DWC_LE16_TO_CPU
++
++/** Converts 16 bit bi endian data to CPU byte ordering. */
++extern uint16_t DWC_BE16_TO_CPU(uint16_t *p);
++#define dwc_be16_to_cpu DWC_BE16_TO_CPU
++
++
++/** @name Register Read/Write
++ *
++ * The following six functions should be implemented to read/write registers of
++ * 32-bit and 64-bit sizes.  All modules use this to read/write register values.
++ * The reg value is a pointer to the register calculated from the void *base
++ * variable passed into the driver when it is started.  */
++
++#ifdef DWC_LINUX
++/* Linux doesn't need any extra parameters for register read/write, so we
++ * just throw away the IO context parameter.
++ */
++/** Reads the content of a 32-bit register. */
++extern uint32_t DWC_READ_REG32(uint32_t volatile *reg);
++#define dwc_read_reg32(_ctx_,_reg_) DWC_READ_REG32(_reg_)
++
++/** Reads the content of a 64-bit register. */
++extern uint64_t DWC_READ_REG64(uint64_t volatile *reg);
++#define dwc_read_reg64(_ctx_,_reg_) DWC_READ_REG64(_reg_)
++
++/** Writes to a 32-bit register. */
++extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value);
++#define dwc_write_reg32(_ctx_,_reg_,_val_) DWC_WRITE_REG32(_reg_, _val_)
++
++/** Writes to a 64-bit register. */
++extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value);
++#define dwc_write_reg64(_ctx_,_reg_,_val_) DWC_WRITE_REG64(_reg_, _val_)
++
++/**
++ * Modify bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ */
++extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask);
++#define dwc_modify_reg32(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_)
++extern void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask);
++#define dwc_modify_reg64(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG64(_reg_,_cmsk_,_smsk_)
++
++#endif	/* DWC_LINUX */
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++typedef struct dwc_ioctx {
++	struct device *dev;
++	bus_space_tag_t iot;
++	bus_space_handle_t ioh;
++} dwc_ioctx_t;
++
++/** BSD needs two extra parameters for register read/write, so we pass
++ * them in using the IO context parameter.
++ */
++/** Reads the content of a 32-bit register. */
++extern uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg);
++#define dwc_read_reg32 DWC_READ_REG32
++
++/** Reads the content of a 64-bit register. */
++extern uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg);
++#define dwc_read_reg64 DWC_READ_REG64
++
++/** Writes to a 32-bit register. */
++extern void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value);
++#define dwc_write_reg32 DWC_WRITE_REG32
++
++/** Writes to a 64-bit register. */
++extern void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value);
++#define dwc_write_reg64 DWC_WRITE_REG64
++
++/**
++ * Modify bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ */
++extern void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask);
++#define dwc_modify_reg32 DWC_MODIFY_REG32
++extern void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask);
++#define dwc_modify_reg64 DWC_MODIFY_REG64
++
++#endif	/* DWC_FREEBSD || DWC_NETBSD */
++
++/** @cond */
++
++/** @name Some convenience MACROS used internally.  Define DWC_DEBUG_REGS to log the
++ * register writes. */
++
++#ifdef DWC_LINUX
++
++# ifdef DWC_DEBUG_REGS
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \
++	return DWC_READ_REG32(&container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \
++	DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \
++		  &(((uint32_t*)container->regs->_reg)[num]), data); \
++	DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(_container_type *container) { \
++	return DWC_READ_REG32(&container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \
++	DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \
++	DWC_WRITE_REG32(&container->regs->_reg, data); \
++}
++
++# else	/* DWC_DEBUG_REGS */
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \
++	return DWC_READ_REG32(&container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \
++	DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(_container_type *container) { \
++	return DWC_READ_REG32(&container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \
++	DWC_WRITE_REG32(&container->regs->_reg, data); \
++}
++
++# endif	/* DWC_DEBUG_REGS */
++
++#endif	/* DWC_LINUX */
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++
++# ifdef DWC_DEBUG_REGS
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \
++	DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \
++		  &(((uint32_t*)container->regs->_reg)[num]), data); \
++	DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \
++	DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \
++	DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \
++}
++
++# else	/* DWC_DEBUG_REGS */
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \
++	DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \
++	DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \
++}
++
++# endif	/* DWC_DEBUG_REGS */
++
++#endif	/* DWC_FREEBSD || DWC_NETBSD */
++
++/** @endcond */
++
++
++#ifdef DWC_CRYPTOLIB
++/** @name Crypto Functions
++ *
++ * These are the low-level cryptographic functions used by the driver. */
++
++/** Perform AES CBC */
++extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out);
++#define dwc_aes_cbc DWC_AES_CBC
++
++/** Fill the provided buffer with random bytes.  These should be cryptographic grade random numbers. */
++extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length);
++#define dwc_random_bytes DWC_RANDOM_BYTES
++
++/** Perform the SHA-256 hash function */
++extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out);
++#define dwc_sha256 DWC_SHA256
++
++/** Calculated the HMAC-SHA256 */
++extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out);
++#define dwc_hmac_sha256 DWC_HMAC_SHA256
++
++#endif	/* DWC_CRYPTOLIB */
++
++
++/** @name Memory Allocation
++ *
++ * These function provide access to memory allocation.  There are only 2 DMA
++ * functions and 3 Regular memory functions that need to be implemented.  None
++ * of the memory debugging routines need to be implemented.  The allocation
++ * routines all ZERO the contents of the memory.
++ *
++ * Defining DWC_DEBUG_MEMORY turns on memory debugging and statistic gathering.
++ * This checks for memory leaks, keeping track of alloc/free pairs.  It also
++ * keeps track of how much memory the driver is using at any given time. */
++
++#define DWC_PAGE_SIZE 4096
++#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff)
++#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0)
++
++#define DWC_INVALID_DMA_ADDR 0x0
++
++#ifdef DWC_LINUX
++/** Type for a DMA address */
++typedef dma_addr_t dwc_dma_t;
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++typedef bus_addr_t dwc_dma_t;
++#endif
++
++#ifdef DWC_FREEBSD
++typedef struct dwc_dmactx {
++	struct device *dev;
++	bus_dma_tag_t dma_tag;
++	bus_dmamap_t dma_map;
++	bus_addr_t dma_paddr;
++	void *dma_vaddr;
++} dwc_dmactx_t;
++#endif
++
++#ifdef DWC_NETBSD
++typedef struct dwc_dmactx {
++	struct device *dev;
++	bus_dma_tag_t dma_tag;
++	bus_dmamap_t dma_map;
++	bus_dma_segment_t segs[1];
++	int nsegs;
++	bus_addr_t dma_paddr;
++	void *dma_vaddr;
++} dwc_dmactx_t;
++#endif
++
++/* @todo these functions will be added in the future */
++#if 0
++/**
++ * Creates a DMA pool from which you can allocate DMA buffers.  Buffers
++ * allocated from this pool will be guaranteed to meet the size, alignment, and
++ * boundary requirements specified.
++ *
++ * @param[in] size Specifies the size of the buffers that will be allocated from
++ * this pool.
++ * @param[in] align Specifies the byte alignment requirements of the buffers
++ * allocated from this pool.  Must be a power of 2.
++ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from
++ * this pool must not cross.
++ *
++ * @returns A pointer to an internal opaque structure which is not to be
++ * accessed outside of these library functions.  Use this handle to specify
++ * which pools to allocate/free DMA buffers from and also to destroy the pool,
++ * when you are done with it.
++ */
++extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary);
++
++/**
++ * Destroy a DMA pool.  All buffers allocated from that pool must be freed first.
++ */
++extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool);
++
++/**
++ * Allocate a buffer from the specified DMA pool and zeros its contents.
++ */
++extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr);
++
++/**
++ * Free a previously allocated buffer from the DMA pool.
++ */
++extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr);
++#endif
++
++/** Allocates a DMA capable buffer and zeroes its contents. */
++extern void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr);
++
++/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */
++extern void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr);
++
++/** Frees a previously allocated buffer. */
++extern void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr);
++
++/** Allocates a block of memory and zeroes its contents. */
++extern void *__DWC_ALLOC(void *mem_ctx, uint32_t size);
++
++/** Allocates a block of memory and zeroes its contents, in an atomic manner
++ * which can be used inside interrupt context.  The size should be sufficiently
++ * small, a few KB at most, such that failures are not likely to occur.  Can just call
++ * __DWC_ALLOC if it is atomic. */
++extern void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size);
++
++/** Frees a previously allocated buffer. */
++extern void __DWC_FREE(void *mem_ctx, void *addr);
++
++#ifndef DWC_DEBUG_MEMORY
++
++#define DWC_ALLOC(_size_) __DWC_ALLOC(NULL, _size_)
++#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(NULL, _size_)
++#define DWC_FREE(_addr_) __DWC_FREE(NULL, _addr_)
++
++# ifdef DWC_LINUX
++#define DWC_DMA_ALLOC(_size_,_dma_) __DWC_DMA_ALLOC(NULL, _size_, _dma_)
++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) __DWC_DMA_ALLOC_ATOMIC(NULL, _size_,_dma_)
++#define DWC_DMA_FREE(_size_,_virt_,_dma_) __DWC_DMA_FREE(NULL, _size_, _virt_, _dma_)
++# endif
++
++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++#define DWC_DMA_ALLOC __DWC_DMA_ALLOC
++#define DWC_DMA_FREE __DWC_DMA_FREE
++# endif
++extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line);
++
++#else	/* DWC_DEBUG_MEMORY */
++
++extern void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line);
++extern void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, int line);
++extern void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line);
++extern void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
++				 char const *func, int line);
++extern void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, 
++				char const *func, int line);
++extern void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr,
++			       dwc_dma_t dma_addr, char const *func, int line);
++
++extern int dwc_memory_debug_start(void *mem_ctx);
++extern void dwc_memory_debug_stop(void);
++extern void dwc_memory_debug_report(void);
++
++#define DWC_ALLOC(_size_) dwc_alloc_debug(NULL, _size_, __func__, __LINE__)
++#define DWC_ALLOC_ATOMIC(_size_) dwc_alloc_atomic_debug(NULL, _size_, \
++							__func__, __LINE__)
++#define DWC_FREE(_addr_) dwc_free_debug(NULL, _addr_, __func__, __LINE__)
++
++# ifdef DWC_LINUX
++#define DWC_DMA_ALLOC(_size_,_dma_) dwc_dma_alloc_debug(NULL, _size_, \
++						_dma_, __func__, __LINE__)
++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) dwc_dma_alloc_atomic_debug(NULL, _size_, \
++						_dma_, __func__, __LINE__)
++#define DWC_DMA_FREE(_size_,_virt_,_dma_) dwc_dma_free_debug(NULL, _size_, \
++						_virt_, _dma_, __func__, __LINE__)
++# endif
++
++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++#define DWC_DMA_ALLOC(_ctx_,_size_,_dma_) dwc_dma_alloc_debug(_ctx_, _size_, \
++						_dma_, __func__, __LINE__)
++#define DWC_DMA_FREE(_ctx_,_size_,_virt_,_dma_) dwc_dma_free_debug(_ctx_, _size_, \
++						 _virt_, _dma_, __func__, __LINE__)
++# endif
++
++#endif /* DWC_DEBUG_MEMORY */
++
++#define dwc_alloc(_ctx_,_size_) DWC_ALLOC(_size_)
++#define dwc_alloc_atomic(_ctx_,_size_) DWC_ALLOC_ATOMIC(_size_)
++#define dwc_free(_ctx_,_addr_) DWC_FREE(_addr_)
++
++#ifdef DWC_LINUX
++/* Linux doesn't need any extra parameters for DMA buffer allocation, so we
++ * just throw away the DMA context parameter.
++ */
++#define dwc_dma_alloc(_ctx_,_size_,_dma_) DWC_DMA_ALLOC(_size_, _dma_)
++#define dwc_dma_alloc_atomic(_ctx_,_size_,_dma_) DWC_DMA_ALLOC_ATOMIC(_size_, _dma_)
++#define dwc_dma_free(_ctx_,_size_,_virt_,_dma_) DWC_DMA_FREE(_size_, _virt_, _dma_)
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++/** BSD needs several extra parameters for DMA buffer allocation, so we pass
++ * them in using the DMA context parameter.
++ */
++#define dwc_dma_alloc DWC_DMA_ALLOC
++#define dwc_dma_free DWC_DMA_FREE
++#endif
++
++
++/** @name Memory and String Processing */
++
++/** memset() clone */
++extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size);
++#define dwc_memset DWC_MEMSET
++
++/** memcpy() clone */
++extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size);
++#define dwc_memcpy DWC_MEMCPY
++
++/** memmove() clone */
++extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size);
++#define dwc_memmove DWC_MEMMOVE
++
++/** memcmp() clone */
++extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size);
++#define dwc_memcmp DWC_MEMCMP
++
++/** strcmp() clone */
++extern int DWC_STRCMP(void *s1, void *s2);
++#define dwc_strcmp DWC_STRCMP
++
++/** strncmp() clone */
++extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size);
++#define dwc_strncmp DWC_STRNCMP
++
++/** strlen() clone, for NULL terminated ASCII strings */
++extern int DWC_STRLEN(char const *str);
++#define dwc_strlen DWC_STRLEN
++
++/** strcpy() clone, for NULL terminated ASCII strings */
++extern char *DWC_STRCPY(char *to, const char *from);
++#define dwc_strcpy DWC_STRCPY
++
++/** strdup() clone.  If you wish to use memory allocation debugging, this
++ * implementation of strdup should use the DWC_* memory routines instead of
++ * calling a predefined strdup.  Otherwise the memory allocated by this routine
++ * will not be seen by the debugging routines. */
++extern char *DWC_STRDUP(char const *str);
++#define dwc_strdup(_ctx_,_str_) DWC_STRDUP(_str_)
++
++/** NOT an atoi() clone.  Read the description carefully.  Returns an integer
++ * converted from the string str in base 10 unless the string begins with a "0x"
++ * in which case it is base 16.  String must be a NULL terminated sequence of
++ * ASCII characters and may optionally begin with whitespace, a + or -, and a
++ * "0x" prefix if base 16.  The remaining characters must be valid digits for
++ * the number and end with a NULL character.  If any invalid characters are
++ * encountered or it returns with a negative error code and the results of the
++ * conversion are undefined.  On sucess it returns 0.  Overflow conditions are
++ * undefined.  An example implementation using atoi() can be referenced from the
++ * Linux implementation. */
++extern int DWC_ATOI(const char *str, int32_t *value);
++#define dwc_atoi DWC_ATOI
++
++/** Same as above but for unsigned. */
++extern int DWC_ATOUI(const char *str, uint32_t *value);
++#define dwc_atoui DWC_ATOUI
++
++#ifdef DWC_UTFLIB
++/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */
++extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len);
++#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE
++#endif
++
++
++/** @name Wait queues
++ *
++ * Wait queues provide a means of synchronizing between threads or processes.  A
++ * process can block on a waitq if some condition is not true, waiting for it to
++ * become true.  When the waitq is triggered all waiting process will get
++ * unblocked and the condition will be check again.  Waitqs should be triggered
++ * every time a condition can potentially change.*/
++struct dwc_waitq;
++
++/** Type for a waitq */
++typedef struct dwc_waitq dwc_waitq_t;
++
++/** The type of waitq condition callback function.  This is called every time
++ * condition is evaluated. */
++typedef int (*dwc_waitq_condition_t)(void *data);
++
++/** Allocate a waitq */
++extern dwc_waitq_t *DWC_WAITQ_ALLOC(void);
++#define dwc_waitq_alloc(_ctx_) DWC_WAITQ_ALLOC()
++
++/** Free a waitq */
++extern void DWC_WAITQ_FREE(dwc_waitq_t *wq);
++#define dwc_waitq_free DWC_WAITQ_FREE
++
++/** Check the condition and if it is false, block on the waitq.  When unblocked, check the
++ * condition again.  The function returns when the condition becomes true.  The return value
++ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */
++extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data);
++#define dwc_waitq_wait DWC_WAITQ_WAIT
++
++/** Check the condition and if it is false, block on the waitq.  When unblocked,
++ * check the condition again.  The function returns when the condition become
++ * true or the timeout has passed.  The return value is 0 on condition true or
++ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on
++ * error. */
++extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++				      void *data, int32_t msecs);
++#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT
++
++/** Trigger a waitq, unblocking all processes.  This should be called whenever a condition
++ * has potentially changed. */
++extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq);
++#define dwc_waitq_trigger DWC_WAITQ_TRIGGER
++
++/** Unblock all processes waiting on the waitq with an ABORTED result. */
++extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq);
++#define dwc_waitq_abort DWC_WAITQ_ABORT
++
++
++/** @name Threads
++ *
++ * A thread must be explicitly stopped.  It must check DWC_THREAD_SHOULD_STOP
++ * whenever it is woken up, and then return.  The DWC_THREAD_STOP function
++ * returns the value from the thread.
++ */
++
++struct dwc_thread;
++
++/** Type for a thread */
++typedef struct dwc_thread dwc_thread_t;
++
++/** The thread function */
++typedef int (*dwc_thread_function_t)(void *data);
++
++/** Create a thread and start it running the thread_function.  Returns a handle
++ * to the thread */
++extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data);
++#define dwc_thread_run(_ctx_,_func_,_name_,_data_) DWC_THREAD_RUN(_func_, _name_, _data_)
++
++/** Stops a thread.  Return the value returned by the thread.  Or will return
++ * DWC_ABORT if the thread never started. */
++extern int DWC_THREAD_STOP(dwc_thread_t *thread);
++#define dwc_thread_stop DWC_THREAD_STOP
++
++/** Signifies to the thread that it must stop. */
++#ifdef DWC_LINUX
++/* Linux doesn't need any parameters for kthread_should_stop() */
++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void);
++#define dwc_thread_should_stop(_thrd_) DWC_THREAD_SHOULD_STOP()
++
++/* No thread_exit function in Linux */
++#define dwc_thread_exit(_thrd_)
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++/** BSD needs the thread pointer for kthread_suspend_check() */
++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread);
++#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP
++
++/** The thread must call this to exit. */
++extern void DWC_THREAD_EXIT(dwc_thread_t *thread);
++#define dwc_thread_exit DWC_THREAD_EXIT
++#endif
++
++
++/** @name Work queues
++ *
++ * Workqs are used to queue a callback function to be called at some later time,
++ * in another thread. */
++struct dwc_workq;
++
++/** Type for a workq */
++typedef struct dwc_workq dwc_workq_t;
++
++/** The type of the callback function to be called. */
++typedef void (*dwc_work_callback_t)(void *data);
++
++/** Allocate a workq */
++extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name);
++#define dwc_workq_alloc(_ctx_,_name_) DWC_WORKQ_ALLOC(_name_)
++
++/** Free a workq.  All work must be completed before being freed. */
++extern void DWC_WORKQ_FREE(dwc_workq_t *workq);
++#define dwc_workq_free DWC_WORKQ_FREE
++
++/** Schedule a callback on the workq, passing in data.  The function will be
++ * scheduled at some later time. */
++extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t cb,
++			       void *data, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 4, 5)));
++#else
++	;
++#endif
++#define dwc_workq_schedule DWC_WORKQ_SCHEDULE
++
++/** Schedule a callback on the workq, that will be called until at least
++ * given number miliseconds have passed. */
++extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t cb,
++				       void *data, uint32_t time, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 5, 6)));
++#else
++	;
++#endif
++#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED
++
++/** The number of processes in the workq */
++extern int DWC_WORKQ_PENDING(dwc_workq_t *workq);
++#define dwc_workq_pending DWC_WORKQ_PENDING
++
++/** Blocks until all the work in the workq is complete or timed out.  Returns <
++ * 0 on timeout. */
++extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout);
++#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE
++
++
++/** @name Tasklets
++ *
++ */
++struct dwc_tasklet;
++
++/** Type for a tasklet */
++typedef struct dwc_tasklet dwc_tasklet_t;
++
++/** The type of the callback function to be called */
++typedef void (*dwc_tasklet_callback_t)(void *data);
++
++/** Allocates a tasklet */
++extern dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data);
++#define dwc_task_alloc(_ctx_,_name_,_cb_,_data_) DWC_TASK_ALLOC(_name_, _cb_, _data_)
++
++/** Frees a tasklet */
++extern void DWC_TASK_FREE(dwc_tasklet_t *task);
++#define dwc_task_free DWC_TASK_FREE
++
++/** Schedules a tasklet to run */
++extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task);
++#define dwc_task_schedule DWC_TASK_SCHEDULE
++
++extern void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task);
++#define dwc_task_hi_schedule DWC_TASK_HI_SCHEDULE
++
++/** @name Timer
++ *
++ * Callbacks must be small and atomic.
++ */
++struct dwc_timer;
++
++/** Type for a timer */
++typedef struct dwc_timer dwc_timer_t;
++
++/** The type of the callback function to be called */
++typedef void (*dwc_timer_callback_t)(void *data);
++
++/** Allocates a timer */
++extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data);
++#define dwc_timer_alloc(_ctx_,_name_,_cb_,_data_) DWC_TIMER_ALLOC(_name_,_cb_,_data_)
++
++/** Frees a timer */
++extern void DWC_TIMER_FREE(dwc_timer_t *timer);
++#define dwc_timer_free DWC_TIMER_FREE
++
++/** Schedules the timer to run at time ms from now.  And will repeat at every
++ * repeat_interval msec therafter
++ *
++ * Modifies a timer that is still awaiting execution to a new expiration time.
++ * The mod_time is added to the old time.  */
++extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time);
++#define dwc_timer_schedule DWC_TIMER_SCHEDULE
++
++/** Disables the timer from execution. */
++extern void DWC_TIMER_CANCEL(dwc_timer_t *timer);
++#define dwc_timer_cancel DWC_TIMER_CANCEL
++
++
++/** @name Spinlocks
++ *
++ * These locks are used when the work between the lock/unlock is atomic and
++ * short.  Interrupts are also disabled during the lock/unlock and thus they are
++ * suitable to lock between interrupt/non-interrupt context.  They also lock
++ * between processes if you have multiple CPUs or Preemption.  If you don't have
++ * multiple CPUS or Preemption, then the you can simply implement the
++ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts.  Because
++ * the work between the lock/unlock is atomic, the process context will never
++ * change, and so you never have to lock between processes.  */
++
++struct dwc_spinlock;
++
++/** Type for a spinlock */
++typedef struct dwc_spinlock dwc_spinlock_t;
++
++/** Type for the 'flags' argument to spinlock funtions */
++typedef unsigned long dwc_irqflags_t;
++
++/** Returns an initialized lock variable.  This function should allocate and
++ * initialize the OS-specific data structure used for locking.  This data
++ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should
++ * be freed by the DWC_FREE_LOCK when it is no longer used. */
++extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void);
++#define dwc_spinlock_alloc(_ctx_) DWC_SPINLOCK_ALLOC()
++
++/** Frees an initialized lock variable. */
++extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock);
++#define dwc_spinlock_free(_ctx_,_lock_) DWC_SPINLOCK_FREE(_lock_)
++
++/** Disables interrupts and blocks until it acquires the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ * @param flags Unsigned long for irq flags storage.
++ */
++extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags);
++#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE
++
++/** Re-enables the interrupt and releases the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ * @param flags Unsigned long for irq flags storage.  Must be the same as was
++ * passed into DWC_LOCK.
++ */
++extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags);
++#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE
++
++/** Blocks until it acquires the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++extern void DWC_SPINLOCK(dwc_spinlock_t *lock);
++#define dwc_spinlock DWC_SPINLOCK
++
++/** Releases the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock);
++#define dwc_spinunlock DWC_SPINUNLOCK
++
++
++/** @name Mutexes
++ *
++ * Unlike spinlocks Mutexes lock only between processes and the work between the
++ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context.
++ */
++
++struct dwc_mutex;
++
++/** Type for a mutex */
++typedef struct dwc_mutex dwc_mutex_t;
++
++/* For Linux Mutex Debugging make it inline because the debugging routines use
++ * the symbol to determine recursive locking.  This makes it falsely think
++ * recursive locking occurs. */
++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)
++#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \
++	__mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \
++	mutex_init((struct mutex *)__mutexp); \
++})
++#endif
++
++/** Allocate a mutex */
++extern dwc_mutex_t *DWC_MUTEX_ALLOC(void);
++#define dwc_mutex_alloc(_ctx_) DWC_MUTEX_ALLOC()
++
++/* For memory leak debugging when using Linux Mutex Debugging */
++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)
++#define DWC_MUTEX_FREE(__mutexp) do { \
++	mutex_destroy((struct mutex *)__mutexp); \
++	DWC_FREE(__mutexp); \
++} while(0)
++#else
++/** Free a mutex */
++extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex);
++#define dwc_mutex_free(_ctx_,_mutex_) DWC_MUTEX_FREE(_mutex_)
++#endif
++
++/** Lock a mutex */
++extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex);
++#define dwc_mutex_lock DWC_MUTEX_LOCK
++
++/** Non-blocking lock returns 1 on successful lock. */
++extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex);
++#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK
++
++/** Unlock a mutex */
++extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex);
++#define dwc_mutex_unlock DWC_MUTEX_UNLOCK
++
++
++/** @name Time */
++
++/** Microsecond delay.
++ *
++ * @param usecs  Microseconds to delay.
++ */
++extern void DWC_UDELAY(uint32_t usecs);
++#define dwc_udelay DWC_UDELAY
++
++/** Millisecond delay.
++ *
++ * @param msecs  Milliseconds to delay.
++ */
++extern void DWC_MDELAY(uint32_t msecs);
++#define dwc_mdelay DWC_MDELAY
++
++/** Non-busy waiting.
++ * Sleeps for specified number of milliseconds.
++ *
++ * @param msecs Milliseconds to sleep.
++ */
++extern void DWC_MSLEEP(uint32_t msecs);
++#define dwc_msleep DWC_MSLEEP
++
++/**
++ * Returns number of milliseconds since boot.
++ */
++extern uint32_t DWC_TIME(void);
++#define dwc_time DWC_TIME
++
++
++
++
++/* @mainpage DWC Portability and Common Library
++ *
++ * This is the documentation for the DWC Portability and Common Library.
++ *
++ * @section intro Introduction
++ *
++ * The DWC Portability library consists of wrapper calls and data structures to
++ * all low-level functions which are typically provided by the OS.  The WUDEV
++ * driver uses only these functions.  In order to port the WUDEV driver, only
++ * the functions in this library need to be re-implemented, with the same
++ * behavior as documented here.
++ *
++ * The Common library consists of higher level functions, which rely only on
++ * calling the functions from the DWC Portability library.  These common
++ * routines are shared across modules.  Some of the common libraries need to be
++ * used directly by the driver programmer when porting WUDEV.  Such as the
++ * parameter and notification libraries.
++ *
++ * @section low Portability Library OS Wrapper Functions
++ *
++ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that
++ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC().  All of
++ * these functions are included in the dwc_os.h file.
++ *
++ * There are many functions here covering a wide array of OS services.  Please
++ * see dwc_os.h for details, and implementation notes for each function.
++ *
++ * @section common Common Library Functions
++ *
++ * Any function starting with dwc and in all lowercase is a common library
++ * routine.  These functions have a portable implementation and do not need to
++ * be reimplemented when porting.  The common routines can be used by any
++ * driver, and some must be used by the end user to control the drivers.  For
++ * example, you must use the Parameter common library in order to set the
++ * parameters in the WUDEV module.
++ *
++ * The common libraries consist of the following:
++ *
++ * - Connection Contexts - Used internally and can be used by end-user.  See dwc_cc.h
++ * - Parameters - Used internally and can be used by end-user.  See dwc_params.h
++ * - Notifications - Used internally and can be used by end-user.  See dwc_notifier.h
++ * - Lists - Used internally and can be used by end-user.  See dwc_list.h
++ * - Memory Debugging - Used internally and can be used by end-user.  See dwc_os.h
++ * - Modpow - Used internally only.  See dwc_modpow.h
++ * - DH - Used internally only.  See dwc_dh.h
++ * - Crypto - Used internally only.  See dwc_crypto.h
++ *
++ *
++ * @section prereq Prerequistes For dwc_os.h
++ * @subsection types Data Types
++ *
++ * The dwc_os.h file assumes that several low-level data types are pre defined for the
++ * compilation environment.  These data types are:
++ *
++ * - uint8_t - unsigned 8-bit data type
++ * - int8_t - signed 8-bit data type
++ * - uint16_t - unsigned 16-bit data type
++ * - int16_t - signed 16-bit data type
++ * - uint32_t - unsigned 32-bit data type
++ * - int32_t - signed 32-bit data type
++ * - uint64_t - unsigned 64-bit data type
++ * - int64_t - signed 64-bit data type
++ *
++ * Ensure that these are defined before using dwc_os.h.  The easiest way to do
++ * that is to modify the top of the file to include the appropriate header.
++ * This is already done for the Linux environment.  If the DWC_LINUX macro is
++ * defined, the correct header will be added.  A standard header <stdint.h> is
++ * also used for environments where standard C headers are available.
++ *
++ * @subsection stdarg Variable Arguments
++ *
++ * Variable arguments are provided by a standard C header <stdarg.h>.  it is
++ * available in Both the Linux and ANSI C enviornment.  An equivalent must be
++ * provided in your enviornment in order to use dwc_os.h with the debug and
++ * tracing message functionality.
++ *
++ * @subsection thread Threading
++ *
++ * WUDEV Core must be run on an operating system that provides for multiple
++ * threads/processes.  Threading can be implemented in many ways, even in
++ * embedded systems without an operating system.  At the bare minimum, the
++ * system should be able to start any number of processes at any time to handle
++ * special work.  It need not be a pre-emptive system.  Process context can
++ * change upon a call to a blocking function.  The hardware interrupt context
++ * that calls the module's ISR() function must be differentiable from process
++ * context, even if your processes are impemented via a hardware interrupt.
++ * Further locking mechanism between process must exist (or be implemented), and
++ * process context must have a way to disable interrupts for a period of time to
++ * lock them out.  If all of this exists, the functions in dwc_os.h related to
++ * threading should be able to be implemented with the defined behavior.
++ *
++ */
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_OS_H_ */
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/Makefile linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile
+--- linux-3.10/drivers/usb/host/dwc_common_port/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,58 @@
++#
++# Makefile for DWC_common library
++#
++
++ifneq ($(KERNELRELEASE),)
++
++EXTRA_CFLAGS	+= -DDWC_LINUX
++#EXTRA_CFLAGS	+= -DDEBUG
++#EXTRA_CFLAGS	+= -DDWC_DEBUG_REGS
++#EXTRA_CFLAGS	+= -DDWC_DEBUG_MEMORY
++
++EXTRA_CFLAGS	+= -DDWC_LIBMODULE
++EXTRA_CFLAGS	+= -DDWC_CCLIB
++#EXTRA_CFLAGS	+= -DDWC_CRYPTOLIB
++EXTRA_CFLAGS	+= -DDWC_NOTIFYLIB
++EXTRA_CFLAGS	+= -DDWC_UTFLIB
++
++obj-$(CONFIG_USB_DWCOTG)	+= dwc_common_port_lib.o
++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \
++			    dwc_crypto.o dwc_notifier.o \
++			    dwc_common_linux.o dwc_mem.o
++
++kernrelwd := $(subst ., ,$(KERNELRELEASE))
++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd))
++			    
++ifneq ($(kernrel3),2.6.20)
++# grayg - I only know that we use EXTRA_CFLAGS in 2.6.31 actually
++EXTRA_CFLAGS += $(CPPFLAGS)
++endif
++
++else
++
++#ifeq ($(KDIR),)
++#$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment)
++#endif
++
++ifeq ($(ARCH),)
++$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \
++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-")
++endif
++
++ifeq ($(DOXYGEN),)
++DOXYGEN		:= doxygen
++endif
++
++default:
++	$(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++
++docs:	$(wildcard *.[hc]) doc/doxygen.cfg
++	$(DOXYGEN) doc/doxygen.cfg
++
++tags:	$(wildcard *.[hc])
++	$(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
++
++endif
++
++clean:
++	rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/Makefile.fbsd linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile.fbsd
+--- linux-3.10/drivers/usb/host/dwc_common_port/Makefile.fbsd	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile.fbsd	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,17 @@
++CFLAGS	+= -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include
++CFLAGS	+= -DDWC_FREEBSD
++CFLAGS	+= -DDEBUG
++#CFLAGS	+= -DDWC_DEBUG_REGS
++#CFLAGS	+= -DDWC_DEBUG_MEMORY
++
++#CFLAGS	+= -DDWC_LIBMODULE
++#CFLAGS	+= -DDWC_CCLIB
++#CFLAGS	+= -DDWC_CRYPTOLIB
++#CFLAGS	+= -DDWC_NOTIFYLIB
++#CFLAGS	+= -DDWC_UTFLIB
++
++KMOD = dwc_common_port_lib
++SRCS = dwc_cc.c dwc_modpow.c dwc_dh.c dwc_crypto.c dwc_notifier.c \
++       dwc_common_fbsd.c dwc_mem.c
++
++.include <bsd.kmod.mk>
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/Makefile.linux linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile.linux
+--- linux-3.10/drivers/usb/host/dwc_common_port/Makefile.linux	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile.linux	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,49 @@
++#
++# Makefile for DWC_common library
++#
++ifneq ($(KERNELRELEASE),)
++
++EXTRA_CFLAGS	+= -DDWC_LINUX
++#EXTRA_CFLAGS	+= -DDEBUG
++#EXTRA_CFLAGS	+= -DDWC_DEBUG_REGS
++#EXTRA_CFLAGS	+= -DDWC_DEBUG_MEMORY
++
++EXTRA_CFLAGS	+= -DDWC_LIBMODULE
++EXTRA_CFLAGS	+= -DDWC_CCLIB
++EXTRA_CFLAGS	+= -DDWC_CRYPTOLIB
++EXTRA_CFLAGS	+= -DDWC_NOTIFYLIB
++EXTRA_CFLAGS	+= -DDWC_UTFLIB
++
++obj-m			 := dwc_common_port_lib.o
++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \
++			    dwc_crypto.o dwc_notifier.o \
++			    dwc_common_linux.o dwc_mem.o
++
++else
++
++ifeq ($(KDIR),)
++$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment)
++endif
++
++ifeq ($(ARCH),)
++$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \
++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-")
++endif
++
++ifeq ($(DOXYGEN),)
++DOXYGEN		:= doxygen
++endif
++
++default:
++	$(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++
++docs:	$(wildcard *.[hc]) doc/doxygen.cfg
++	$(DOXYGEN) doc/doxygen.cfg
++
++tags:	$(wildcard *.[hc])
++	$(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
++
++endif
++
++clean:
++	rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
+diff -urN linux-3.10/drivers/usb/host/dwc_common_port/usb.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/usb.h
+--- linux-3.10/drivers/usb/host/dwc_common_port/usb.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/usb.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,946 @@
++/*
++ * Copyright (c) 1998 The NetBSD Foundation, Inc.
++ * All rights reserved.
++ *
++ * This code is derived from software contributed to The NetBSD Foundation
++ * by Lennart Augustsson (lennart@augustsson.net) at
++ * Carlstedt Research & Technology.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. All advertising materials mentioning features or use of this software
++ *    must display the following acknowledgement:
++ *        This product includes software developed by the NetBSD
++ *        Foundation, Inc. and its contributors.
++ * 4. Neither the name of The NetBSD Foundation nor the names of its
++ *    contributors may be used to endorse or promote products derived
++ *    from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
++ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
++ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
++ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
++ * POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/* Modified by Synopsys, Inc, 12/12/2007 */
++
++
++#ifndef _USB_H_
++#define _USB_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * The USB records contain some unaligned little-endian word
++ * components.  The U[SG]ETW macros take care of both the alignment
++ * and endian problem and should always be used to access non-byte
++ * values.
++ */
++typedef u_int8_t uByte;
++typedef u_int8_t uWord[2];
++typedef u_int8_t uDWord[4];
++
++#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h))
++#define UCONSTW(x)	{ (x) & 0xff, ((x) >> 8) & 0xff }
++#define UCONSTDW(x)	{ (x) & 0xff, ((x) >> 8) & 0xff, \
++			  ((x) >> 16) & 0xff, ((x) >> 24) & 0xff }
++
++#if 1
++#define UGETW(w) ((w)[0] | ((w)[1] << 8))
++#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8))
++#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24))
++#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \
++		     (w)[1] = (u_int8_t)((v) >> 8), \
++		     (w)[2] = (u_int8_t)((v) >> 16), \
++		     (w)[3] = (u_int8_t)((v) >> 24))
++#else
++/*
++ * On little-endian machines that can handle unanliged accesses
++ * (e.g. i386) these macros can be replaced by the following.
++ */
++#define UGETW(w) (*(u_int16_t *)(w))
++#define USETW(w,v) (*(u_int16_t *)(w) = (v))
++#define UGETDW(w) (*(u_int32_t *)(w))
++#define USETDW(w,v) (*(u_int32_t *)(w) = (v))
++#endif
++
++/*
++ * Macros for accessing UAS IU fields, which are big-endian
++ */
++#define IUSETW2(w,h,l) ((w)[0] = (u_int8_t)(h), (w)[1] = (u_int8_t)(l))
++#define IUCONSTW(x)	{ ((x) >> 8) & 0xff, (x) & 0xff }
++#define IUCONSTDW(x)	{ ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
++			((x) >> 8) & 0xff, (x) & 0xff }
++#define IUGETW(w) (((w)[0] << 8) | (w)[1])
++#define IUSETW(w,v) ((w)[0] = (u_int8_t)((v) >> 8), (w)[1] = (u_int8_t)(v))
++#define IUGETDW(w) (((w)[0] << 24) | ((w)[1] << 16) | ((w)[2] << 8) | (w)[3])
++#define IUSETDW(w,v) ((w)[0] = (u_int8_t)((v) >> 24), \
++		      (w)[1] = (u_int8_t)((v) >> 16), \
++		      (w)[2] = (u_int8_t)((v) >> 8), \
++		      (w)[3] = (u_int8_t)(v))
++
++#define UPACKED __attribute__((__packed__))
++
++typedef struct {
++	uByte		bmRequestType;
++	uByte		bRequest;
++	uWord		wValue;
++	uWord		wIndex;
++	uWord		wLength;
++} UPACKED usb_device_request_t;
++
++#define UT_GET_DIR(a) ((a) & 0x80)
++#define UT_WRITE		0x00
++#define UT_READ			0x80
++
++#define UT_GET_TYPE(a) ((a) & 0x60)
++#define UT_STANDARD		0x00
++#define UT_CLASS		0x20
++#define UT_VENDOR		0x40
++
++#define UT_GET_RECIPIENT(a) ((a) & 0x1f)
++#define UT_DEVICE		0x00
++#define UT_INTERFACE		0x01
++#define UT_ENDPOINT		0x02
++#define UT_OTHER		0x03
++
++#define UT_READ_DEVICE		(UT_READ  | UT_STANDARD | UT_DEVICE)
++#define UT_READ_INTERFACE	(UT_READ  | UT_STANDARD | UT_INTERFACE)
++#define UT_READ_ENDPOINT	(UT_READ  | UT_STANDARD | UT_ENDPOINT)
++#define UT_WRITE_DEVICE		(UT_WRITE | UT_STANDARD | UT_DEVICE)
++#define UT_WRITE_INTERFACE	(UT_WRITE | UT_STANDARD | UT_INTERFACE)
++#define UT_WRITE_ENDPOINT	(UT_WRITE | UT_STANDARD | UT_ENDPOINT)
++#define UT_READ_CLASS_DEVICE	(UT_READ  | UT_CLASS | UT_DEVICE)
++#define UT_READ_CLASS_INTERFACE	(UT_READ  | UT_CLASS | UT_INTERFACE)
++#define UT_READ_CLASS_OTHER	(UT_READ  | UT_CLASS | UT_OTHER)
++#define UT_READ_CLASS_ENDPOINT	(UT_READ  | UT_CLASS | UT_ENDPOINT)
++#define UT_WRITE_CLASS_DEVICE	(UT_WRITE | UT_CLASS | UT_DEVICE)
++#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE)
++#define UT_WRITE_CLASS_OTHER	(UT_WRITE | UT_CLASS | UT_OTHER)
++#define UT_WRITE_CLASS_ENDPOINT	(UT_WRITE | UT_CLASS | UT_ENDPOINT)
++#define UT_READ_VENDOR_DEVICE	(UT_READ  | UT_VENDOR | UT_DEVICE)
++#define UT_READ_VENDOR_INTERFACE (UT_READ  | UT_VENDOR | UT_INTERFACE)
++#define UT_READ_VENDOR_OTHER	(UT_READ  | UT_VENDOR | UT_OTHER)
++#define UT_READ_VENDOR_ENDPOINT	(UT_READ  | UT_VENDOR | UT_ENDPOINT)
++#define UT_WRITE_VENDOR_DEVICE	(UT_WRITE | UT_VENDOR | UT_DEVICE)
++#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE)
++#define UT_WRITE_VENDOR_OTHER	(UT_WRITE | UT_VENDOR | UT_OTHER)
++#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT)
++
++/* Requests */
++#define UR_GET_STATUS		0x00
++#define  USTAT_STANDARD_STATUS  0x00
++#define  WUSTAT_WUSB_FEATURE    0x01
++#define  WUSTAT_CHANNEL_INFO    0x02
++#define  WUSTAT_RECEIVED_DATA   0x03
++#define  WUSTAT_MAS_AVAILABILITY 0x04
++#define  WUSTAT_CURRENT_TRANSMIT_POWER 0x05
++#define UR_CLEAR_FEATURE	0x01
++#define UR_SET_FEATURE		0x03
++#define UR_SET_AND_TEST_FEATURE 0x0c
++#define UR_SET_ADDRESS		0x05
++#define UR_GET_DESCRIPTOR	0x06
++#define  UDESC_DEVICE		0x01
++#define  UDESC_CONFIG		0x02
++#define  UDESC_STRING		0x03
++#define  UDESC_INTERFACE	0x04
++#define  UDESC_ENDPOINT		0x05
++#define  UDESC_SS_USB_COMPANION	0x30
++#define  UDESC_DEVICE_QUALIFIER	0x06
++#define  UDESC_OTHER_SPEED_CONFIGURATION 0x07
++#define  UDESC_INTERFACE_POWER	0x08
++#define  UDESC_OTG		0x09
++#define  WUDESC_SECURITY	0x0c
++#define  WUDESC_KEY		0x0d
++#define   WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf)
++#define   WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4)
++#define    WUD_KEY_TYPE_ASSOC    0x01
++#define    WUD_KEY_TYPE_GTK      0x02
++#define   WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6)
++#define    WUD_KEY_ORIGIN_HOST   0x00
++#define    WUD_KEY_ORIGIN_DEVICE 0x01
++#define  WUDESC_ENCRYPTION_TYPE	0x0e
++#define  WUDESC_BOS		0x0f
++#define  WUDESC_DEVICE_CAPABILITY 0x10
++#define  WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11
++#define  UDESC_BOS		0x0f
++#define  UDESC_DEVICE_CAPABILITY 0x10
++#define  UDESC_CS_DEVICE	0x21	/* class specific */
++#define  UDESC_CS_CONFIG	0x22
++#define  UDESC_CS_STRING	0x23
++#define  UDESC_CS_INTERFACE	0x24
++#define  UDESC_CS_ENDPOINT	0x25
++#define  UDESC_HUB		0x29
++#define UR_SET_DESCRIPTOR	0x07
++#define UR_GET_CONFIG		0x08
++#define UR_SET_CONFIG		0x09
++#define UR_GET_INTERFACE	0x0a
++#define UR_SET_INTERFACE	0x0b
++#define UR_SYNCH_FRAME		0x0c
++#define WUR_SET_ENCRYPTION      0x0d
++#define WUR_GET_ENCRYPTION	0x0e
++#define WUR_SET_HANDSHAKE	0x0f
++#define WUR_GET_HANDSHAKE	0x10
++#define WUR_SET_CONNECTION	0x11
++#define WUR_SET_SECURITY_DATA	0x12
++#define WUR_GET_SECURITY_DATA	0x13
++#define WUR_SET_WUSB_DATA	0x14
++#define  WUDATA_DRPIE_INFO	0x01
++#define  WUDATA_TRANSMIT_DATA	0x02
++#define  WUDATA_TRANSMIT_PARAMS	0x03
++#define  WUDATA_RECEIVE_PARAMS	0x04
++#define  WUDATA_TRANSMIT_POWER	0x05
++#define WUR_LOOPBACK_DATA_WRITE	0x15
++#define WUR_LOOPBACK_DATA_READ	0x16
++#define WUR_SET_INTERFACE_DS	0x17
++
++/* Feature numbers */
++#define UF_ENDPOINT_HALT	0
++#define UF_DEVICE_REMOTE_WAKEUP	1
++#define UF_TEST_MODE		2
++#define UF_DEVICE_B_HNP_ENABLE	3
++#define UF_DEVICE_A_HNP_SUPPORT	4
++#define UF_DEVICE_A_ALT_HNP_SUPPORT 5
++#define WUF_WUSB		3
++#define  WUF_TX_DRPIE		0x0
++#define  WUF_DEV_XMIT_PACKET	0x1
++#define  WUF_COUNT_PACKETS	0x2
++#define  WUF_CAPTURE_PACKETS	0x3
++#define UF_FUNCTION_SUSPEND	0
++#define UF_U1_ENABLE		48
++#define UF_U2_ENABLE		49
++#define UF_LTM_ENABLE		50
++
++/* Class requests from the USB 2.0 hub spec, table 11-15 */
++#define UCR_CLEAR_HUB_FEATURE		(0x2000 | UR_CLEAR_FEATURE)
++#define UCR_CLEAR_PORT_FEATURE		(0x2300 | UR_CLEAR_FEATURE)
++#define UCR_GET_HUB_DESCRIPTOR		(0xa000 | UR_GET_DESCRIPTOR)
++#define UCR_GET_HUB_STATUS		(0xa000 | UR_GET_STATUS)
++#define UCR_GET_PORT_STATUS		(0xa300 | UR_GET_STATUS)
++#define UCR_SET_HUB_FEATURE		(0x2000 | UR_SET_FEATURE)
++#define UCR_SET_PORT_FEATURE		(0x2300 | UR_SET_FEATURE)
++#define UCR_SET_AND_TEST_PORT_FEATURE	(0xa300 | UR_SET_AND_TEST_FEATURE)
++
++#ifdef _MSC_VER
++#include <pshpack1.h>
++#endif
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bDescriptorSubtype;
++} UPACKED usb_descriptor_t;
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++} UPACKED usb_descriptor_header_t;
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		bcdUSB;
++#define UD_USB_2_0		0x0200
++#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0)
++	uByte		bDeviceClass;
++	uByte		bDeviceSubClass;
++	uByte		bDeviceProtocol;
++	uByte		bMaxPacketSize;
++	/* The fields below are not part of the initial descriptor. */
++	uWord		idVendor;
++	uWord		idProduct;
++	uWord		bcdDevice;
++	uByte		iManufacturer;
++	uByte		iProduct;
++	uByte		iSerialNumber;
++	uByte		bNumConfigurations;
++} UPACKED usb_device_descriptor_t;
++#define USB_DEVICE_DESCRIPTOR_SIZE 18
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		wTotalLength;
++	uByte		bNumInterface;
++	uByte		bConfigurationValue;
++	uByte		iConfiguration;
++#define UC_ATT_ONE		(1 << 7)	/* must be set */
++#define UC_ATT_SELFPOWER	(1 << 6)	/* self powered */
++#define UC_ATT_WAKEUP		(1 << 5)	/* can wakeup */
++#define UC_ATT_BATTERY		(1 << 4)	/* battery powered */
++	uByte		bmAttributes;
++#define UC_BUS_POWERED		0x80
++#define UC_SELF_POWERED		0x40
++#define UC_REMOTE_WAKEUP	0x20
++	uByte		bMaxPower; /* max current in 2 mA units */
++#define UC_POWER_FACTOR 2
++} UPACKED usb_config_descriptor_t;
++#define USB_CONFIG_DESCRIPTOR_SIZE 9
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bInterfaceNumber;
++	uByte		bAlternateSetting;
++	uByte		bNumEndpoints;
++	uByte		bInterfaceClass;
++	uByte		bInterfaceSubClass;
++	uByte		bInterfaceProtocol;
++	uByte		iInterface;
++} UPACKED usb_interface_descriptor_t;
++#define USB_INTERFACE_DESCRIPTOR_SIZE 9
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bEndpointAddress;
++#define UE_GET_DIR(a)	((a) & 0x80)
++#define UE_SET_DIR(a,d)	((a) | (((d)&1) << 7))
++#define UE_DIR_IN	0x80
++#define UE_DIR_OUT	0x00
++#define UE_ADDR		0x0f
++#define UE_GET_ADDR(a)	((a) & UE_ADDR)
++	uByte		bmAttributes;
++#define UE_XFERTYPE	0x03
++#define  UE_CONTROL	0x00
++#define  UE_ISOCHRONOUS	0x01
++#define  UE_BULK	0x02
++#define  UE_INTERRUPT	0x03
++#define UE_GET_XFERTYPE(a)	((a) & UE_XFERTYPE)
++#define UE_ISO_TYPE	0x0c
++#define  UE_ISO_ASYNC	0x04
++#define  UE_ISO_ADAPT	0x08
++#define  UE_ISO_SYNC	0x0c
++#define UE_GET_ISO_TYPE(a)	((a) & UE_ISO_TYPE)
++	uWord		wMaxPacketSize;
++	uByte		bInterval;
++} UPACKED usb_endpoint_descriptor_t;
++#define USB_ENDPOINT_DESCRIPTOR_SIZE 7
++
++typedef struct ss_endpoint_companion_descriptor {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bMaxBurst;
++#define USSE_GET_MAX_STREAMS(a)		((a) & 0x1f)
++#define USSE_SET_MAX_STREAMS(a, b)	((a) | ((b) & 0x1f))
++#define USSE_GET_MAX_PACKET_NUM(a)	((a) & 0x03)
++#define USSE_SET_MAX_PACKET_NUM(a, b)	((a) | ((b) & 0x03))
++	uByte bmAttributes;
++	uWord wBytesPerInterval;
++} UPACKED ss_endpoint_companion_descriptor_t;
++#define USB_SS_ENDPOINT_COMPANION_DESCRIPTOR_SIZE 6
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		bString[127];
++} UPACKED usb_string_descriptor_t;
++#define USB_MAX_STRING_LEN 128
++#define USB_LANGUAGE_TABLE 0	/* # of the string language id table */
++
++/* Hub specific request */
++#define UR_GET_BUS_STATE	0x02
++#define UR_CLEAR_TT_BUFFER	0x08
++#define UR_RESET_TT		0x09
++#define UR_GET_TT_STATE		0x0a
++#define UR_STOP_TT		0x0b
++
++/* Hub features */
++#define UHF_C_HUB_LOCAL_POWER	0
++#define UHF_C_HUB_OVER_CURRENT	1
++#define UHF_PORT_CONNECTION	0
++#define UHF_PORT_ENABLE		1
++#define UHF_PORT_SUSPEND	2
++#define UHF_PORT_OVER_CURRENT	3
++#define UHF_PORT_RESET		4
++#define UHF_PORT_L1		5
++#define UHF_PORT_POWER		8
++#define UHF_PORT_LOW_SPEED	9
++#define UHF_PORT_HIGH_SPEED	10
++#define UHF_C_PORT_CONNECTION	16
++#define UHF_C_PORT_ENABLE	17
++#define UHF_C_PORT_SUSPEND	18
++#define UHF_C_PORT_OVER_CURRENT	19
++#define UHF_C_PORT_RESET	20
++#define UHF_C_PORT_L1		23
++#define UHF_PORT_TEST		21
++#define UHF_PORT_INDICATOR	22
++
++typedef struct {
++	uByte		bDescLength;
++	uByte		bDescriptorType;
++	uByte		bNbrPorts;
++	uWord		wHubCharacteristics;
++#define UHD_PWR			0x0003
++#define  UHD_PWR_GANGED		0x0000
++#define  UHD_PWR_INDIVIDUAL	0x0001
++#define  UHD_PWR_NO_SWITCH	0x0002
++#define UHD_COMPOUND		0x0004
++#define UHD_OC			0x0018
++#define  UHD_OC_GLOBAL		0x0000
++#define  UHD_OC_INDIVIDUAL	0x0008
++#define  UHD_OC_NONE		0x0010
++#define UHD_TT_THINK		0x0060
++#define  UHD_TT_THINK_8		0x0000
++#define  UHD_TT_THINK_16	0x0020
++#define  UHD_TT_THINK_24	0x0040
++#define  UHD_TT_THINK_32	0x0060
++#define UHD_PORT_IND		0x0080
++	uByte		bPwrOn2PwrGood;	/* delay in 2 ms units */
++#define UHD_PWRON_FACTOR 2
++	uByte		bHubContrCurrent;
++	uByte		DeviceRemovable[32]; /* max 255 ports */
++#define UHD_NOT_REMOV(desc, i) \
++    (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1)
++	/* deprecated */ uByte		PortPowerCtrlMask[1];
++} UPACKED usb_hub_descriptor_t;
++#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		bcdUSB;
++	uByte		bDeviceClass;
++	uByte		bDeviceSubClass;
++	uByte		bDeviceProtocol;
++	uByte		bMaxPacketSize0;
++	uByte		bNumConfigurations;
++	uByte		bReserved;
++} UPACKED usb_device_qualifier_t;
++#define USB_DEVICE_QUALIFIER_SIZE 10
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bmAttributes;
++#define UOTG_SRP	0x01
++#define UOTG_HNP	0x02
++} UPACKED usb_otg_descriptor_t;
++
++/* OTG feature selectors */
++#define UOTG_B_HNP_ENABLE	3
++#define UOTG_A_HNP_SUPPORT	4
++#define UOTG_A_ALT_HNP_SUPPORT	5
++
++typedef struct {
++	uWord		wStatus;
++/* Device status flags */
++#define UDS_SELF_POWERED		0x0001
++#define UDS_REMOTE_WAKEUP		0x0002
++/* Endpoint status flags */
++#define UES_HALT			0x0001
++} UPACKED usb_status_t;
++
++typedef struct {
++	uWord		wHubStatus;
++#define UHS_LOCAL_POWER			0x0001
++#define UHS_OVER_CURRENT		0x0002
++	uWord		wHubChange;
++} UPACKED usb_hub_status_t;
++
++typedef struct {
++	uWord		wPortStatus;
++#define UPS_CURRENT_CONNECT_STATUS	0x0001
++#define UPS_PORT_ENABLED		0x0002
++#define UPS_SUSPEND			0x0004
++#define UPS_OVERCURRENT_INDICATOR	0x0008
++#define UPS_RESET			0x0010
++#define UPS_PORT_POWER			0x0100
++#define UPS_LOW_SPEED			0x0200
++#define UPS_HIGH_SPEED			0x0400
++#define UPS_PORT_TEST			0x0800
++#define UPS_PORT_INDICATOR		0x1000
++	uWord		wPortChange;
++#define UPS_C_CONNECT_STATUS		0x0001
++#define UPS_C_PORT_ENABLED		0x0002
++#define UPS_C_SUSPEND			0x0004
++#define UPS_C_OVERCURRENT_INDICATOR	0x0008
++#define UPS_C_PORT_RESET		0x0010
++} UPACKED usb_port_status_t;
++
++#ifdef _MSC_VER
++#include <poppack.h>
++#endif
++
++/* Device class codes */
++#define UDCLASS_IN_INTERFACE	0x00
++#define UDCLASS_COMM		0x02
++#define UDCLASS_HUB		0x09
++#define  UDSUBCLASS_HUB		0x00
++#define  UDPROTO_FSHUB		0x00
++#define  UDPROTO_HSHUBSTT	0x01
++#define  UDPROTO_HSHUBMTT	0x02
++#define UDCLASS_DIAGNOSTIC	0xdc
++#define UDCLASS_WIRELESS	0xe0
++#define  UDSUBCLASS_RF		0x01
++#define   UDPROTO_BLUETOOTH	0x01
++#define UDCLASS_VENDOR		0xff
++
++/* Interface class codes */
++#define UICLASS_UNSPEC		0x00
++
++#define UICLASS_AUDIO		0x01
++#define  UISUBCLASS_AUDIOCONTROL	1
++#define  UISUBCLASS_AUDIOSTREAM		2
++#define  UISUBCLASS_MIDISTREAM		3
++
++#define UICLASS_CDC		0x02 /* communication */
++#define  UISUBCLASS_DIRECT_LINE_CONTROL_MODEL	1
++#define  UISUBCLASS_ABSTRACT_CONTROL_MODEL	2
++#define  UISUBCLASS_TELEPHONE_CONTROL_MODEL	3
++#define  UISUBCLASS_MULTICHANNEL_CONTROL_MODEL	4
++#define  UISUBCLASS_CAPI_CONTROLMODEL		5
++#define  UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6
++#define  UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7
++#define   UIPROTO_CDC_AT			1
++
++#define UICLASS_HID		0x03
++#define  UISUBCLASS_BOOT	1
++#define  UIPROTO_BOOT_KEYBOARD	1
++
++#define UICLASS_PHYSICAL	0x05
++
++#define UICLASS_IMAGE		0x06
++
++#define UICLASS_PRINTER		0x07
++#define  UISUBCLASS_PRINTER	1
++#define  UIPROTO_PRINTER_UNI	1
++#define  UIPROTO_PRINTER_BI	2
++#define  UIPROTO_PRINTER_1284	3
++
++#define UICLASS_MASS		0x08
++#define  UISUBCLASS_RBC		1
++#define  UISUBCLASS_SFF8020I	2
++#define  UISUBCLASS_QIC157	3
++#define  UISUBCLASS_UFI		4
++#define  UISUBCLASS_SFF8070I	5
++#define  UISUBCLASS_SCSI	6
++#define  UIPROTO_MASS_CBI_I	0
++#define  UIPROTO_MASS_CBI	1
++#define  UIPROTO_MASS_BBB_OLD	2	/* Not in the spec anymore */
++#define  UIPROTO_MASS_BBB	80	/* 'P' for the Iomega Zip drive */
++
++#define UICLASS_HUB		0x09
++#define  UISUBCLASS_HUB		0
++#define  UIPROTO_FSHUB		0
++#define  UIPROTO_HSHUBSTT	0 /* Yes, same as previous */
++#define  UIPROTO_HSHUBMTT	1
++
++#define UICLASS_CDC_DATA	0x0a
++#define  UISUBCLASS_DATA		0
++#define   UIPROTO_DATA_ISDNBRI		0x30    /* Physical iface */
++#define   UIPROTO_DATA_HDLC		0x31    /* HDLC */
++#define   UIPROTO_DATA_TRANSPARENT	0x32    /* Transparent */
++#define   UIPROTO_DATA_Q921M		0x50    /* Management for Q921 */
++#define   UIPROTO_DATA_Q921		0x51    /* Data for Q921 */
++#define   UIPROTO_DATA_Q921TM		0x52    /* TEI multiplexer for Q921 */
++#define   UIPROTO_DATA_V42BIS		0x90    /* Data compression */
++#define   UIPROTO_DATA_Q931		0x91    /* Euro-ISDN */
++#define   UIPROTO_DATA_V120		0x92    /* V.24 rate adaption */
++#define   UIPROTO_DATA_CAPI		0x93    /* CAPI 2.0 commands */
++#define   UIPROTO_DATA_HOST_BASED	0xfd    /* Host based driver */
++#define   UIPROTO_DATA_PUF		0xfe    /* see Prot. Unit Func. Desc.*/
++#define   UIPROTO_DATA_VENDOR		0xff    /* Vendor specific */
++
++#define UICLASS_SMARTCARD	0x0b
++
++/*#define UICLASS_FIRM_UPD	0x0c*/
++
++#define UICLASS_SECURITY	0x0d
++
++#define UICLASS_DIAGNOSTIC	0xdc
++
++#define UICLASS_WIRELESS	0xe0
++#define  UISUBCLASS_RF			0x01
++#define   UIPROTO_BLUETOOTH		0x01
++
++#define UICLASS_APPL_SPEC	0xfe
++#define  UISUBCLASS_FIRMWARE_DOWNLOAD	1
++#define  UISUBCLASS_IRDA		2
++#define  UIPROTO_IRDA			0
++
++#define UICLASS_VENDOR		0xff
++
++#define USB_HUB_MAX_DEPTH 5
++
++/*
++ * Minimum time a device needs to be powered down to go through
++ * a power cycle.  XXX Are these time in the spec?
++ */
++#define USB_POWER_DOWN_TIME	200 /* ms */
++#define USB_PORT_POWER_DOWN_TIME	100 /* ms */
++
++#if 0
++/* These are the values from the spec. */
++#define USB_PORT_RESET_DELAY	10  /* ms */
++#define USB_PORT_ROOT_RESET_DELAY 50  /* ms */
++#define USB_PORT_RESET_RECOVERY	10  /* ms */
++#define USB_PORT_POWERUP_DELAY	100 /* ms */
++#define USB_SET_ADDRESS_SETTLE	2   /* ms */
++#define USB_RESUME_DELAY	(20*5)  /* ms */
++#define USB_RESUME_WAIT		10  /* ms */
++#define USB_RESUME_RECOVERY	10  /* ms */
++#define USB_EXTRA_POWER_UP_TIME	0   /* ms */
++#else
++/* Allow for marginal (i.e. non-conforming) devices. */
++#define USB_PORT_RESET_DELAY	50  /* ms */
++#define USB_PORT_ROOT_RESET_DELAY 250  /* ms */
++#define USB_PORT_RESET_RECOVERY	250  /* ms */
++#define USB_PORT_POWERUP_DELAY	300 /* ms */
++#define USB_SET_ADDRESS_SETTLE	10  /* ms */
++#define USB_RESUME_DELAY	(50*5)  /* ms */
++#define USB_RESUME_WAIT		50  /* ms */
++#define USB_RESUME_RECOVERY	50  /* ms */
++#define USB_EXTRA_POWER_UP_TIME	20  /* ms */
++#endif
++
++#define USB_MIN_POWER		100 /* mA */
++#define USB_MAX_POWER		500 /* mA */
++
++#define USB_BUS_RESET_DELAY	100 /* ms XXX?*/
++
++#define USB_UNCONFIG_NO 0
++#define USB_UNCONFIG_INDEX (-1)
++
++/*** ioctl() related stuff ***/
++
++struct usb_ctl_request {
++	int	ucr_addr;
++	usb_device_request_t ucr_request;
++	void	*ucr_data;
++	int	ucr_flags;
++#define USBD_SHORT_XFER_OK	0x04	/* allow short reads */
++	int	ucr_actlen;		/* actual length transferred */
++};
++
++struct usb_alt_interface {
++	int	uai_config_index;
++	int	uai_interface_index;
++	int	uai_alt_no;
++};
++
++#define USB_CURRENT_CONFIG_INDEX (-1)
++#define USB_CURRENT_ALT_INDEX (-1)
++
++struct usb_config_desc {
++	int	ucd_config_index;
++	usb_config_descriptor_t ucd_desc;
++};
++
++struct usb_interface_desc {
++	int	uid_config_index;
++	int	uid_interface_index;
++	int	uid_alt_index;
++	usb_interface_descriptor_t uid_desc;
++};
++
++struct usb_endpoint_desc {
++	int	ued_config_index;
++	int	ued_interface_index;
++	int	ued_alt_index;
++	int	ued_endpoint_index;
++	usb_endpoint_descriptor_t ued_desc;
++};
++
++struct usb_full_desc {
++	int	ufd_config_index;
++	u_int	ufd_size;
++	u_char	*ufd_data;
++};
++
++struct usb_string_desc {
++	int	usd_string_index;
++	int	usd_language_id;
++	usb_string_descriptor_t usd_desc;
++};
++
++struct usb_ctl_report_desc {
++	int	ucrd_size;
++	u_char	ucrd_data[1024];	/* filled data size will vary */
++};
++
++typedef struct { u_int32_t cookie; } usb_event_cookie_t;
++
++#define USB_MAX_DEVNAMES 4
++#define USB_MAX_DEVNAMELEN 16
++struct usb_device_info {
++	u_int8_t	udi_bus;
++	u_int8_t	udi_addr;	/* device address */
++	usb_event_cookie_t udi_cookie;
++	char		udi_product[USB_MAX_STRING_LEN];
++	char		udi_vendor[USB_MAX_STRING_LEN];
++	char		udi_release[8];
++	u_int16_t	udi_productNo;
++	u_int16_t	udi_vendorNo;
++	u_int16_t	udi_releaseNo;
++	u_int8_t	udi_class;
++	u_int8_t	udi_subclass;
++	u_int8_t	udi_protocol;
++	u_int8_t	udi_config;
++	u_int8_t	udi_speed;
++#define USB_SPEED_UNKNOWN	0
++#define USB_SPEED_LOW		1
++#define USB_SPEED_FULL		2
++#define USB_SPEED_HIGH		3
++#define USB_SPEED_VARIABLE	4
++#define USB_SPEED_SUPER		5
++	int		udi_power;	/* power consumption in mA, 0 if selfpowered */
++	int		udi_nports;
++	char		udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN];
++	u_int8_t	udi_ports[16];/* hub only: addresses of devices on ports */
++#define USB_PORT_ENABLED 0xff
++#define USB_PORT_SUSPENDED 0xfe
++#define USB_PORT_POWERED 0xfd
++#define USB_PORT_DISABLED 0xfc
++};
++
++struct usb_ctl_report {
++	int	ucr_report;
++	u_char	ucr_data[1024];	/* filled data size will vary */
++};
++
++struct usb_device_stats {
++	u_long	uds_requests[4];	/* indexed by transfer type UE_* */
++};
++
++#define WUSB_MIN_IE			0x80
++#define WUSB_WCTA_IE			0x80
++#define WUSB_WCONNECTACK_IE		0x81
++#define WUSB_WHOSTINFO_IE		0x82
++#define  WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3)
++#define   WUHI_CA_RECONN		0x00
++#define   WUHI_CA_LIMITED		0x01
++#define   WUHI_CA_ALL			0x03
++#define  WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3)
++#define WUSB_WCHCHANGEANNOUNCE_IE	0x83
++#define WUSB_WDEV_DISCONNECT_IE		0x84
++#define WUSB_WHOST_DISCONNECT_IE	0x85
++#define WUSB_WRELEASE_CHANNEL_IE	0x86
++#define WUSB_WWORK_IE			0x87
++#define WUSB_WCHANNEL_STOP_IE		0x88
++#define WUSB_WDEV_KEEPALIVE_IE		0x89
++#define WUSB_WISOCH_DISCARD_IE		0x8A
++#define WUSB_WRESETDEVICE_IE		0x8B
++#define WUSB_WXMIT_PACKET_ADJUST_IE	0x8C
++#define WUSB_MAX_IE			0x8C
++
++/* Device Notification Types */
++
++#define WUSB_DN_MIN			0x01
++#define WUSB_DN_CONNECT			0x01
++# define WUSB_DA_OLDCONN	0x00
++# define WUSB_DA_NEWCONN	0x01
++# define WUSB_DA_SELF_BEACON	0x02
++# define WUSB_DA_DIR_BEACON	0x04
++# define WUSB_DA_NO_BEACON	0x06
++#define WUSB_DN_DISCONNECT		0x02
++#define WUSB_DN_EPRDY			0x03
++#define WUSB_DN_MASAVAILCHANGED		0x04
++#define WUSB_DN_REMOTEWAKEUP		0x05
++#define WUSB_DN_SLEEP			0x06
++#define WUSB_DN_ALIVE			0x07
++#define WUSB_DN_MAX			0x07
++
++#ifdef _MSC_VER
++#include <pshpack1.h>
++#endif
++
++/* WUSB Handshake Data.  Used during the SET/GET HANDSHAKE requests */
++typedef struct wusb_hndshk_data {
++	uByte bMessageNumber;
++	uByte bStatus;
++	uByte tTKID[3];
++	uByte bReserved;
++	uByte CDID[16];
++	uByte Nonce[16];
++	uByte MIC[8];
++} UPACKED wusb_hndshk_data_t;
++#define WUSB_HANDSHAKE_LEN_FOR_MIC	38
++
++/* WUSB Connection Context */
++typedef struct wusb_conn_context {
++	uByte CHID [16];
++	uByte CDID [16];
++	uByte CK [16];
++} UPACKED wusb_conn_context_t;
++
++/* WUSB Security Descriptor */
++typedef struct wusb_security_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uWord wTotalLength;
++	uByte bNumEncryptionTypes;
++} UPACKED wusb_security_desc_t;
++
++/* WUSB Encryption Type Descriptor */
++typedef struct wusb_encrypt_type_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++
++	uByte bEncryptionType;
++#define WUETD_UNSECURE		0
++#define WUETD_WIRED		1
++#define WUETD_CCM_1		2
++#define WUETD_RSA_1		3
++
++	uByte bEncryptionValue;
++	uByte bAuthKeyIndex;
++} UPACKED wusb_encrypt_type_desc_t;
++
++/* WUSB Key Descriptor */
++typedef struct wusb_key_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte tTKID[3];
++	uByte bReserved;
++	uByte KeyData[1];	/* variable length */
++} UPACKED wusb_key_desc_t;
++
++/* WUSB BOS Descriptor (Binary device Object Store) */
++typedef struct wusb_bos_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uWord wTotalLength;
++	uByte bNumDeviceCaps;
++} UPACKED wusb_bos_desc_t;
++
++#define USB_DEVICE_CAPABILITY_20_EXTENSION	0x02
++typedef struct usb_dev_cap_20_ext_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++#define USB_20_EXT_LPM				0x02
++	uDWord bmAttributes;
++} UPACKED usb_dev_cap_20_ext_desc_t;
++
++#define USB_DEVICE_CAPABILITY_SS_USB		0x03
++typedef struct usb_dev_cap_ss_usb {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++#define USB_DC_SS_USB_LTM_CAPABLE		0x02
++	uByte bmAttributes;
++#define USB_DC_SS_USB_SPEED_SUPPORT_LOW		0x01
++#define USB_DC_SS_USB_SPEED_SUPPORT_FULL	0x02
++#define USB_DC_SS_USB_SPEED_SUPPORT_HIGH	0x04
++#define USB_DC_SS_USB_SPEED_SUPPORT_SS		0x08
++	uWord wSpeedsSupported;
++	uByte bFunctionalitySupport;
++	uByte bU1DevExitLat;
++	uWord wU2DevExitLat;
++} UPACKED usb_dev_cap_ss_usb_t;
++
++#define USB_DEVICE_CAPABILITY_CONTAINER_ID	0x04
++typedef struct usb_dev_cap_container_id {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++	uByte bReserved;
++	uByte containerID[16];
++} UPACKED usb_dev_cap_container_id_t;
++
++/* Device Capability Type Codes */
++#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01
++
++/* Device Capability Descriptor */
++typedef struct wusb_dev_cap_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++	uByte caps[1];	/* Variable length */
++} UPACKED wusb_dev_cap_desc_t;
++
++/* Device Capability Descriptor */
++typedef struct wusb_dev_cap_uwb_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++	uByte bmAttributes;
++	uWord wPHYRates;	/* Bitmap */
++	uByte bmTFITXPowerInfo;
++	uByte bmFFITXPowerInfo;
++	uWord bmBandGroup;
++	uByte bReserved;
++} UPACKED wusb_dev_cap_uwb_desc_t;
++
++/* Wireless USB Endpoint Companion Descriptor */
++typedef struct wusb_endpoint_companion_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bMaxBurst;
++	uByte bMaxSequence;
++	uWord wMaxStreamDelay;
++	uWord wOverTheAirPacketSize;
++	uByte bOverTheAirInterval;
++	uByte bmCompAttributes;
++} UPACKED wusb_endpoint_companion_desc_t;
++
++/* Wireless USB Numeric Association M1 Data Structure */
++typedef struct wusb_m1_data {
++	uByte version;
++	uWord langId;
++	uByte deviceFriendlyNameLength;
++	uByte sha_256_m3[32];
++	uByte deviceFriendlyName[256];
++} UPACKED wusb_m1_data_t;
++
++typedef struct wusb_m2_data {
++	uByte version;
++	uWord langId;
++	uByte hostFriendlyNameLength;
++	uByte pkh[384];
++	uByte hostFriendlyName[256];
++} UPACKED wusb_m2_data_t;
++
++typedef struct wusb_m3_data {
++	uByte pkd[384];
++	uByte nd;
++} UPACKED wusb_m3_data_t;
++
++typedef struct wusb_m4_data {
++	uDWord _attributeTypeIdAndLength_1;
++	uWord  associationTypeId;
++
++	uDWord _attributeTypeIdAndLength_2;
++	uWord  associationSubTypeId;
++
++	uDWord _attributeTypeIdAndLength_3;
++	uDWord length;
++
++	uDWord _attributeTypeIdAndLength_4;
++	uDWord associationStatus;
++
++	uDWord _attributeTypeIdAndLength_5;
++	uByte  chid[16];
++
++	uDWord _attributeTypeIdAndLength_6;
++	uByte  cdid[16];
++
++	uDWord _attributeTypeIdAndLength_7;
++	uByte  bandGroups[2];
++} UPACKED wusb_m4_data_t;
++
++#ifdef _MSC_VER
++#include <poppack.h>
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _USB_H_ */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/doc/doxygen.cfg linux-rpi-3.10.y/drivers/usb/host/dwc_otg/doc/doxygen.cfg
+--- linux-3.10/drivers/usb/host/dwc_otg/doc/doxygen.cfg	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/doc/doxygen.cfg	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,224 @@
++# Doxyfile 1.3.9.1
++
++#---------------------------------------------------------------------------
++# Project related configuration options
++#---------------------------------------------------------------------------
++PROJECT_NAME           = "DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver"
++PROJECT_NUMBER         = v3.00a
++OUTPUT_DIRECTORY       = ./doc/
++CREATE_SUBDIRS         = NO
++OUTPUT_LANGUAGE        = English
++BRIEF_MEMBER_DESC      = YES
++REPEAT_BRIEF           = YES
++ABBREVIATE_BRIEF       = "The $name class" \
++                         "The $name widget" \
++                         "The $name file" \
++                         is \
++                         provides \
++                         specifies \
++                         contains \
++                         represents \
++                         a \
++                         an \
++                         the
++ALWAYS_DETAILED_SEC    = NO
++INLINE_INHERITED_MEMB  = NO
++FULL_PATH_NAMES        = NO
++STRIP_FROM_PATH        = 
++STRIP_FROM_INC_PATH    = 
++SHORT_NAMES            = NO
++JAVADOC_AUTOBRIEF      = YES
++MULTILINE_CPP_IS_BRIEF = NO
++INHERIT_DOCS           = YES
++DISTRIBUTE_GROUP_DOC   = NO
++TAB_SIZE               = 8
++ALIASES                = 
++OPTIMIZE_OUTPUT_FOR_C  = YES
++OPTIMIZE_OUTPUT_JAVA   = NO
++SUBGROUPING            = YES
++#---------------------------------------------------------------------------
++# Build related configuration options
++#---------------------------------------------------------------------------
++EXTRACT_ALL            = NO
++EXTRACT_PRIVATE        = YES
++EXTRACT_STATIC         = YES
++EXTRACT_LOCAL_CLASSES  = YES
++EXTRACT_LOCAL_METHODS  = NO
++HIDE_UNDOC_MEMBERS     = NO
++HIDE_UNDOC_CLASSES     = NO
++HIDE_FRIEND_COMPOUNDS  = NO
++HIDE_IN_BODY_DOCS      = NO
++INTERNAL_DOCS          = NO
++CASE_SENSE_NAMES       = NO
++HIDE_SCOPE_NAMES       = NO
++SHOW_INCLUDE_FILES     = YES
++INLINE_INFO            = YES
++SORT_MEMBER_DOCS       = NO
++SORT_BRIEF_DOCS        = NO
++SORT_BY_SCOPE_NAME     = NO
++GENERATE_TODOLIST      = YES
++GENERATE_TESTLIST      = YES
++GENERATE_BUGLIST       = YES
++GENERATE_DEPRECATEDLIST= YES
++ENABLED_SECTIONS       = 
++MAX_INITIALIZER_LINES  = 30
++SHOW_USED_FILES        = YES
++SHOW_DIRECTORIES       = YES
++#---------------------------------------------------------------------------
++# configuration options related to warning and progress messages
++#---------------------------------------------------------------------------
++QUIET                  = YES
++WARNINGS               = YES
++WARN_IF_UNDOCUMENTED   = NO
++WARN_IF_DOC_ERROR      = YES
++WARN_FORMAT            = "$file:$line: $text"
++WARN_LOGFILE           = 
++#---------------------------------------------------------------------------
++# configuration options related to the input files
++#---------------------------------------------------------------------------
++INPUT                  = .
++FILE_PATTERNS          = *.c \
++                         *.h \
++                         ./linux/*.c \
++                         ./linux/*.h
++RECURSIVE              = NO
++EXCLUDE                = ./test/ \
++                         ./dwc_otg/.AppleDouble/
++EXCLUDE_SYMLINKS       = YES
++EXCLUDE_PATTERNS       = *.mod.*
++EXAMPLE_PATH           = 
++EXAMPLE_PATTERNS       = *
++EXAMPLE_RECURSIVE      = NO
++IMAGE_PATH             = 
++INPUT_FILTER           = 
++FILTER_PATTERNS        = 
++FILTER_SOURCE_FILES    = NO
++#---------------------------------------------------------------------------
++# configuration options related to source browsing
++#---------------------------------------------------------------------------
++SOURCE_BROWSER         = YES
++INLINE_SOURCES         = NO
++STRIP_CODE_COMMENTS    = YES
++REFERENCED_BY_RELATION = NO
++REFERENCES_RELATION    = NO
++VERBATIM_HEADERS       = NO
++#---------------------------------------------------------------------------
++# configuration options related to the alphabetical class index
++#---------------------------------------------------------------------------
++ALPHABETICAL_INDEX     = NO
++COLS_IN_ALPHA_INDEX    = 5
++IGNORE_PREFIX          = 
++#---------------------------------------------------------------------------
++# configuration options related to the HTML output
++#---------------------------------------------------------------------------
++GENERATE_HTML          = YES
++HTML_OUTPUT            = html
++HTML_FILE_EXTENSION    = .html
++HTML_HEADER            = 
++HTML_FOOTER            = 
++HTML_STYLESHEET        = 
++HTML_ALIGN_MEMBERS     = YES
++GENERATE_HTMLHELP      = NO
++CHM_FILE               = 
++HHC_LOCATION           = 
++GENERATE_CHI           = NO
++BINARY_TOC             = NO
++TOC_EXPAND             = NO
++DISABLE_INDEX          = NO
++ENUM_VALUES_PER_LINE   = 4
++GENERATE_TREEVIEW      = YES
++TREEVIEW_WIDTH         = 250
++#---------------------------------------------------------------------------
++# configuration options related to the LaTeX output
++#---------------------------------------------------------------------------
++GENERATE_LATEX         = NO
++LATEX_OUTPUT           = latex
++LATEX_CMD_NAME         = latex
++MAKEINDEX_CMD_NAME     = makeindex
++COMPACT_LATEX          = NO
++PAPER_TYPE             = a4wide
++EXTRA_PACKAGES         = 
++LATEX_HEADER           = 
++PDF_HYPERLINKS         = NO
++USE_PDFLATEX           = NO
++LATEX_BATCHMODE        = NO
++LATEX_HIDE_INDICES     = NO
++#---------------------------------------------------------------------------
++# configuration options related to the RTF output
++#---------------------------------------------------------------------------
++GENERATE_RTF           = NO
++RTF_OUTPUT             = rtf
++COMPACT_RTF            = NO
++RTF_HYPERLINKS         = NO
++RTF_STYLESHEET_FILE    = 
++RTF_EXTENSIONS_FILE    = 
++#---------------------------------------------------------------------------
++# configuration options related to the man page output
++#---------------------------------------------------------------------------
++GENERATE_MAN           = NO
++MAN_OUTPUT             = man
++MAN_EXTENSION          = .3
++MAN_LINKS              = NO
++#---------------------------------------------------------------------------
++# configuration options related to the XML output
++#---------------------------------------------------------------------------
++GENERATE_XML           = NO
++XML_OUTPUT             = xml
++XML_SCHEMA             = 
++XML_DTD                = 
++XML_PROGRAMLISTING     = YES
++#---------------------------------------------------------------------------
++# configuration options for the AutoGen Definitions output
++#---------------------------------------------------------------------------
++GENERATE_AUTOGEN_DEF   = NO
++#---------------------------------------------------------------------------
++# configuration options related to the Perl module output
++#---------------------------------------------------------------------------
++GENERATE_PERLMOD       = NO
++PERLMOD_LATEX          = NO
++PERLMOD_PRETTY         = YES
++PERLMOD_MAKEVAR_PREFIX = 
++#---------------------------------------------------------------------------
++# Configuration options related to the preprocessor   
++#---------------------------------------------------------------------------
++ENABLE_PREPROCESSING   = YES
++MACRO_EXPANSION        = YES
++EXPAND_ONLY_PREDEF     = YES
++SEARCH_INCLUDES        = YES
++INCLUDE_PATH           = 
++INCLUDE_FILE_PATTERNS  = 
++PREDEFINED             = DEVICE_ATTR DWC_EN_ISOC
++EXPAND_AS_DEFINED      = DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW DWC_OTG_DEVICE_ATTR_BITFIELD_STORE DWC_OTG_DEVICE_ATTR_BITFIELD_RW DWC_OTG_DEVICE_ATTR_BITFIELD_RO DWC_OTG_DEVICE_ATTR_REG_SHOW DWC_OTG_DEVICE_ATTR_REG_STORE DWC_OTG_DEVICE_ATTR_REG32_RW DWC_OTG_DEVICE_ATTR_REG32_RO DWC_EN_ISOC
++SKIP_FUNCTION_MACROS   = NO
++#---------------------------------------------------------------------------
++# Configuration::additions related to external references   
++#---------------------------------------------------------------------------
++TAGFILES               = 
++GENERATE_TAGFILE       = 
++ALLEXTERNALS           = NO
++EXTERNAL_GROUPS        = YES
++PERL_PATH              = /usr/bin/perl
++#---------------------------------------------------------------------------
++# Configuration options related to the dot tool   
++#---------------------------------------------------------------------------
++CLASS_DIAGRAMS         = YES
++HIDE_UNDOC_RELATIONS   = YES
++HAVE_DOT               = NO
++CLASS_GRAPH            = YES
++COLLABORATION_GRAPH    = YES
++UML_LOOK               = NO
++TEMPLATE_RELATIONS     = NO
++INCLUDE_GRAPH          = YES
++INCLUDED_BY_GRAPH      = YES
++CALL_GRAPH             = NO
++GRAPHICAL_HIERARCHY    = YES
++DOT_IMAGE_FORMAT       = png
++DOT_PATH               = 
++DOTFILE_DIRS           = 
++MAX_DOT_GRAPH_DEPTH    = 1000
++GENERATE_LEGEND        = YES
++DOT_CLEANUP            = YES
++#---------------------------------------------------------------------------
++# Configuration::additions related to the search engine   
++#---------------------------------------------------------------------------
++SEARCHENGINE           = NO
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dummy_audio.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dummy_audio.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dummy_audio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dummy_audio.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1575 @@
++/*
++ * zero.c -- Gadget Zero, for USB development
++ *
++ * Copyright (C) 2003-2004 David Brownell
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++/*
++ * Gadget Zero only needs two bulk endpoints, and is an example of how you
++ * can write a hardware-agnostic gadget driver running inside a USB device.
++ *
++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
++ * affect most of the driver.
++ *
++ * Use it with the Linux host/master side "usbtest" driver to get a basic
++ * functional test of your device-side usb stack, or with "usb-skeleton".
++ *
++ * It supports two similar configurations.  One sinks whatever the usb host
++ * writes, and in return sources zeroes.  The other loops whatever the host
++ * writes back, so the host can read it.  Module options include:
++ *
++ *   buflen=N		default N=4096, buffer size used
++ *   qlen=N		default N=32, how many buffers in the loopback queue
++ *   loopdefault	default false, list loopback config first
++ *
++ * Many drivers will only have one configuration, letting them be much
++ * simpler if they also don't support high speed operation (like this
++ * driver does).
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/smp_lock.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/uts.h>
++#include <linux/version.h>
++#include <linux/device.h>
++#include <linux/moduleparam.h>
++#include <linux/proc_fs.h>
++
++#include <asm/byteorder.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/unaligned.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#include <linux/usb_gadget.h>
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++
++/**
++ * usb_gadget_get_string - fill out a string descriptor 
++ * @table: of c strings encoded using UTF-8
++ * @id: string id, from low byte of wValue in get string descriptor
++ * @buf: at least 256 bytes
++ *
++ * Finds the UTF-8 string matching the ID, and converts it into a
++ * string descriptor in utf16-le.
++ * Returns length of descriptor (always even) or negative errno
++ *
++ * If your driver needs stings in multiple languages, you'll probably
++ * "switch (wIndex) { ... }"  in your ep0 string descriptor logic,
++ * using this routine after choosing which set of UTF-8 strings to use.
++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
++ * characters (which are also widely used in C strings).
++ */
++int
++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
++{
++	struct usb_string	*s;
++	int			len;
++
++	/* descriptor 0 has the language id */
++	if (id == 0) {
++		buf [0] = 4;
++		buf [1] = USB_DT_STRING;
++		buf [2] = (u8) table->language;
++		buf [3] = (u8) (table->language >> 8);
++		return 4;
++	}
++	for (s = table->strings; s && s->s; s++)
++		if (s->id == id)
++			break;
++
++	/* unrecognized: stall. */
++	if (!s || !s->s)
++		return -EINVAL;
++
++	/* string descriptors have length, tag, then UTF16-LE text */
++	len = min ((size_t) 126, strlen (s->s));
++	memset (buf + 2, 0, 2 * len);	/* zero all the bytes */
++	len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len);
++	if (len < 0)
++		return -EINVAL;
++	buf [0] = (len + 1) * 2;
++	buf [1] = USB_DT_STRING;
++	return buf [0];
++}
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++/**
++ * usb_descriptor_fillbuf - fill buffer with descriptors
++ * @buf: Buffer to be filled
++ * @buflen: Size of buf
++ * @src: Array of descriptor pointers, terminated by null pointer.
++ *
++ * Copies descriptors into the buffer, returning the length or a
++ * negative error code if they can't all be copied.  Useful when
++ * assembling descriptors for an associated set of interfaces used
++ * as part of configuring a composite device; or in other cases where
++ * sets of descriptors need to be marshaled.
++ */
++int
++usb_descriptor_fillbuf(void *buf, unsigned buflen,
++		const struct usb_descriptor_header **src)
++{
++	u8	*dest = buf;
++
++	if (!src)
++		return -EINVAL;
++
++	/* fill buffer from src[] until null descriptor ptr */
++	for (; 0 != *src; src++) {
++		unsigned		len = (*src)->bLength;
++
++		if (len > buflen)
++			return -EINVAL;
++		memcpy(dest, *src, len);
++		buflen -= len;
++		dest += len;
++	}
++	return dest - (u8 *)buf;
++}
++
++
++/**
++ * usb_gadget_config_buf - builts a complete configuration descriptor
++ * @config: Header for the descriptor, including characteristics such
++ *	as power requirements and number of interfaces.
++ * @desc: Null-terminated vector of pointers to the descriptors (interface,
++ *	endpoint, etc) defining all functions in this device configuration.
++ * @buf: Buffer for the resulting configuration descriptor.
++ * @length: Length of buffer.  If this is not big enough to hold the
++ *	entire configuration descriptor, an error code will be returned.
++ *
++ * This copies descriptors into the response buffer, building a descriptor
++ * for that configuration.  It returns the buffer length or a negative
++ * status code.  The config.wTotalLength field is set to match the length
++ * of the result, but other descriptor fields (including power usage and
++ * interface count) must be set by the caller.
++ *
++ * Gadget drivers could use this when constructing a config descriptor
++ * in response to USB_REQ_GET_DESCRIPTOR.  They will need to patch the
++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
++ */
++int usb_gadget_config_buf(
++	const struct usb_config_descriptor	*config,
++	void					*buf,
++	unsigned				length,
++	const struct usb_descriptor_header	**desc
++)
++{
++	struct usb_config_descriptor		*cp = buf;
++	int					len;
++
++	/* config descriptor first */
++	if (length < USB_DT_CONFIG_SIZE || !desc)
++		return -EINVAL;
++	*cp = *config; 
++
++	/* then interface/endpoint/class/vendor/... */
++	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
++			length - USB_DT_CONFIG_SIZE, desc);
++	if (len < 0)
++		return len;
++	len += USB_DT_CONFIG_SIZE;
++	if (len > 0xffff)
++		return -EINVAL;
++
++	/* patch up the config descriptor */
++	cp->bLength = USB_DT_CONFIG_SIZE;
++	cp->bDescriptorType = USB_DT_CONFIG;
++	cp->wTotalLength = cpu_to_le16(len);
++	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
++	return len;
++}
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++#define RBUF_LEN (1024*1024)
++static int rbuf_start;
++static int rbuf_len;
++static __u8 rbuf[RBUF_LEN];
++
++/*-------------------------------------------------------------------------*/
++
++#define DRIVER_VERSION		"St Patrick's Day 2004"
++
++static const char shortname [] = "zero";
++static const char longname [] = "YAMAHA YST-MS35D USB Speaker  ";
++
++static const char source_sink [] = "source and sink data";
++static const char loopback [] = "loop input to output";
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * driver assumes self-powered hardware, and
++ * has no way for users to trigger remote wakeup.
++ *
++ * this version autoconfigures as much as possible,
++ * which is reasonable for most "bulk-only" drivers.
++ */
++static const char *EP_IN_NAME;		/* source */
++static const char *EP_OUT_NAME;		/* sink */
++
++/*-------------------------------------------------------------------------*/
++
++/* big enough to hold our biggest descriptor */
++#define USB_BUFSIZ	512
++
++struct zero_dev {
++	spinlock_t		lock;
++	struct usb_gadget	*gadget;
++	struct usb_request	*req;		/* for control responses */
++
++	/* when configured, we have one of two configs:
++	 * - source data (in to host) and sink it (out from host)
++	 * - or loop it back (out from host back in to host)
++	 */
++	u8			config;
++	struct usb_ep		*in_ep, *out_ep;
++
++	/* autoresume timer */
++	struct timer_list	resume;
++};
++
++#define xprintk(d,level,fmt,args...) \
++	dev_printk(level , &(d)->gadget->dev , fmt , ## args)
++
++#ifdef DEBUG
++#define DBG(dev,fmt,args...) \
++	xprintk(dev , KERN_DEBUG , fmt , ## args)
++#else
++#define DBG(dev,fmt,args...) \
++	do { } while (0)
++#endif /* DEBUG */
++
++#ifdef VERBOSE
++#define VDBG	DBG
++#else
++#define VDBG(dev,fmt,args...) \
++	do { } while (0)
++#endif /* VERBOSE */
++
++#define ERROR(dev,fmt,args...) \
++	xprintk(dev , KERN_ERR , fmt , ## args)
++#define WARN(dev,fmt,args...) \
++	xprintk(dev , KERN_WARNING , fmt , ## args)
++#define INFO(dev,fmt,args...) \
++	xprintk(dev , KERN_INFO , fmt , ## args)
++
++/*-------------------------------------------------------------------------*/
++
++static unsigned buflen = 4096;
++static unsigned qlen = 32;
++static unsigned pattern = 0;
++
++module_param (buflen, uint, S_IRUGO|S_IWUSR);
++module_param (qlen, uint, S_IRUGO|S_IWUSR);
++module_param (pattern, uint, S_IRUGO|S_IWUSR);
++
++/*
++ * if it's nonzero, autoresume says how many seconds to wait
++ * before trying to wake up the host after suspend.
++ */
++static unsigned autoresume = 0;
++module_param (autoresume, uint, 0);
++
++/*
++ * Normally the "loopback" configuration is second (index 1) so
++ * it's not the default.  Here's where to change that order, to
++ * work better with hosts where config changes are problematic.
++ * Or controllers (like superh) that only support one config.
++ */
++static int loopdefault = 0;
++
++module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
++
++/*-------------------------------------------------------------------------*/
++
++/* Thanks to NetChip Technologies for donating this product ID.
++ *
++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
++ * Instead:  allocate your own, using normal USB-IF procedures.
++ */
++#ifndef	CONFIG_USB_ZERO_HNPTEST
++#define DRIVER_VENDOR_NUM	0x0525		/* NetChip */
++#define DRIVER_PRODUCT_NUM	0xa4a0		/* Linux-USB "Gadget Zero" */
++#else
++#define DRIVER_VENDOR_NUM	0x1a0a		/* OTG test device IDs */
++#define DRIVER_PRODUCT_NUM	0xbadd
++#endif
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * DESCRIPTORS ... most are static, but strings and (full)
++ * configuration descriptors are built on demand.
++ */
++
++/*
++#define STRING_MANUFACTURER		25
++#define STRING_PRODUCT			42
++#define STRING_SERIAL			101
++*/
++#define STRING_MANUFACTURER		1
++#define STRING_PRODUCT			2
++#define STRING_SERIAL			3
++
++#define STRING_SOURCE_SINK		250
++#define STRING_LOOPBACK			251
++
++/*
++ * This device advertises two configurations; these numbers work
++ * on a pxa250 as well as more flexible hardware.
++ */
++#define	CONFIG_SOURCE_SINK	3
++#define	CONFIG_LOOPBACK		2
++
++/*
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++
++	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
++	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
++
++	.idVendor =		__constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
++	.idProduct =		__constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
++	.iManufacturer =	STRING_MANUFACTURER,
++	.iProduct =		STRING_PRODUCT,
++	.iSerialNumber =	STRING_SERIAL,
++	.bNumConfigurations =	2,
++};
++*/
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++	.bcdUSB =		__constant_cpu_to_le16 (0x0100),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++	.bDeviceSubClass =      0,
++	.bDeviceProtocol =      0,
++	.bMaxPacketSize0 =      64,
++	.bcdDevice =            __constant_cpu_to_le16 (0x0100),
++	.idVendor =		__constant_cpu_to_le16 (0x0499),
++	.idProduct =		__constant_cpu_to_le16 (0x3002),
++	.iManufacturer =	STRING_MANUFACTURER,
++	.iProduct =		STRING_PRODUCT,
++	.iSerialNumber =	STRING_SERIAL,
++	.bNumConfigurations =	1,
++};
++
++static struct usb_config_descriptor
++z_config = {
++	.bLength =		sizeof z_config,
++	.bDescriptorType =	USB_DT_CONFIG,
++
++	/* compute wTotalLength on the fly */
++	.bNumInterfaces =	2,
++	.bConfigurationValue =	1,
++	.iConfiguration =	0,
++	.bmAttributes =		0x40,
++	.bMaxPower =		0,	/* self-powered */
++};
++
++
++static struct usb_otg_descriptor
++otg_descriptor = {
++	.bLength =		sizeof otg_descriptor,
++	.bDescriptorType =	USB_DT_OTG,
++
++	.bmAttributes =		USB_OTG_SRP,
++};
++
++/* one interface in each configuration */
++#ifdef	CONFIG_USB_GADGET_DUALSPEED
++
++/*
++ * usb 2.0 devices need to expose both high speed and full speed
++ * descriptors, unless they only run at full speed.
++ *
++ * that means alternate endpoint descriptors (bigger packets)
++ * and a "device qualifier" ... plus more construction options
++ * for the config descriptor.
++ */
++
++static struct usb_qualifier_descriptor
++dev_qualifier = {
++	.bLength =		sizeof dev_qualifier,
++	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
++
++	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
++	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
++
++	.bNumConfigurations =	2,
++};
++
++
++struct usb_cs_as_general_descriptor {
++	__u8  bLength;
++	__u8  bDescriptorType;
++
++	__u8  bDescriptorSubType;
++	__u8  bTerminalLink;
++	__u8  bDelay;
++	__u16  wFormatTag;
++} __attribute__ ((packed));
++
++struct usb_cs_as_format_descriptor {
++	__u8  bLength;
++	__u8  bDescriptorType;
++
++	__u8  bDescriptorSubType;
++	__u8  bFormatType;
++	__u8  bNrChannels;
++	__u8  bSubframeSize;
++	__u8  bBitResolution;
++	__u8  bSamfreqType;
++	__u8  tLowerSamFreq[3];
++	__u8  tUpperSamFreq[3];
++} __attribute__ ((packed));
++
++static const struct usb_interface_descriptor
++z_audio_control_if_desc = {
++	.bLength =		sizeof z_audio_control_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 0,
++	.bAlternateSetting = 0,
++	.bNumEndpoints = 0,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x1,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc = {
++	.bLength =		sizeof z_audio_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 1,
++	.bAlternateSetting = 0,
++	.bNumEndpoints = 0,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x2,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc2 = {
++	.bLength =		sizeof z_audio_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 1,
++	.bAlternateSetting = 1,
++	.bNumEndpoints = 1,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x2,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_cs_as_general_descriptor
++z_audio_cs_as_if_desc = {
++	.bLength = 7,
++	.bDescriptorType = 0x24,
++	
++	.bDescriptorSubType = 0x01,
++	.bTerminalLink = 0x01,
++	.bDelay = 0x0,
++	.wFormatTag = __constant_cpu_to_le16 (0x0001)
++};
++
++
++static const struct usb_cs_as_format_descriptor 
++z_audio_cs_as_format_desc = {
++	.bLength = 0xe,
++	.bDescriptorType = 0x24,
++	
++	.bDescriptorSubType = 2,
++	.bFormatType = 1,
++	.bNrChannels = 1,
++	.bSubframeSize = 1,
++	.bBitResolution = 8,
++	.bSamfreqType = 0,
++	.tLowerSamFreq = {0x7e, 0x13, 0x00},
++	.tUpperSamFreq = {0xe2, 0xd6, 0x00},
++};
++
++static const struct usb_endpoint_descriptor 
++z_iso_ep = {
++	.bLength = 0x09,
++	.bDescriptorType = 0x05,
++	.bEndpointAddress = 0x04,
++	.bmAttributes = 0x09,
++	.wMaxPacketSize = 0x0038,
++	.bInterval = 0x01,
++	.bRefresh = 0x00,
++	.bSynchAddress = 0x00,	
++};
++
++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++// 9 bytes
++static char z_ac_interface_header_desc[] = 
++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 };
++
++// 12 bytes
++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, 
++		     0x03, 0x00, 0x00, 0x00};
++// 13 bytes
++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00, 
++		     0x02, 0x00, 0x02, 0x00, 0x00};
++// 9 bytes
++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02, 
++		     0x00};
++
++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00, 
++		      0x00};
++
++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00, 
++		      0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++		      0x00};
++
++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00,
++		      0x00};
++
++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00,
++		      0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++		      0x00};
++
++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00,
++		       0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00,
++		       0x00};
++
++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00, 
++		       0x00};
++
++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00, 
++		       0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00,
++		       0x00};
++
++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00, 
++		       0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00,
++		       0x00};
++
++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++
++
++static const struct usb_descriptor_header *z_function [] = {
++	(struct usb_descriptor_header *) &z_audio_control_if_desc,
++	(struct usb_descriptor_header *) &z_ac_interface_header_desc,
++	(struct usb_descriptor_header *) &z_0,
++	(struct usb_descriptor_header *) &z_1,
++	(struct usb_descriptor_header *) &z_2,
++	(struct usb_descriptor_header *) &z_audio_if_desc,
++	(struct usb_descriptor_header *) &z_audio_if_desc2,
++	(struct usb_descriptor_header *) &z_audio_cs_as_if_desc,
++	(struct usb_descriptor_header *) &z_audio_cs_as_format_desc,
++	(struct usb_descriptor_header *) &z_iso_ep,
++	(struct usb_descriptor_header *) &z_iso_ep2,
++	(struct usb_descriptor_header *) &za_0,
++	(struct usb_descriptor_header *) &za_1,
++	(struct usb_descriptor_header *) &za_2,
++	(struct usb_descriptor_header *) &za_3,
++	(struct usb_descriptor_header *) &za_4,
++	(struct usb_descriptor_header *) &za_5,
++	(struct usb_descriptor_header *) &za_6,
++	(struct usb_descriptor_header *) &za_7,
++	(struct usb_descriptor_header *) &za_8,
++	(struct usb_descriptor_header *) &za_9,
++	(struct usb_descriptor_header *) &za_10,
++	(struct usb_descriptor_header *) &za_11,
++	(struct usb_descriptor_header *) &za_12,
++	(struct usb_descriptor_header *) &za_13,
++	(struct usb_descriptor_header *) &za_14,
++	(struct usb_descriptor_header *) &za_15,
++	(struct usb_descriptor_header *) &za_16,
++	(struct usb_descriptor_header *) &za_17,
++	(struct usb_descriptor_header *) &za_18,
++	(struct usb_descriptor_header *) &za_19,
++	(struct usb_descriptor_header *) &za_20,
++	(struct usb_descriptor_header *) &za_21,
++	(struct usb_descriptor_header *) &za_22,
++	(struct usb_descriptor_header *) &za_23,
++	(struct usb_descriptor_header *) &za_24,
++	NULL,
++};
++
++/* maxpacket and other transfer characteristics vary by speed. */
++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
++
++#else
++
++/* if there's no high speed support, maxpacket doesn't change. */
++#define ep_desc(g,hs,fs) fs
++
++#endif	/* !CONFIG_USB_GADGET_DUALSPEED */
++
++static char				manufacturer [40];
++//static char				serial [40];
++static char				serial [] = "Ser 00 em";
++
++/* static strings, in UTF-8 */
++static struct usb_string		strings [] = {
++	{ STRING_MANUFACTURER, manufacturer, },
++	{ STRING_PRODUCT, longname, },
++	{ STRING_SERIAL, serial, },
++	{ STRING_LOOPBACK, loopback, },
++	{ STRING_SOURCE_SINK, source_sink, },
++	{  }			/* end of list */
++};
++
++static struct usb_gadget_strings	stringtab = {
++	.language	= 0x0409,	/* en-us */
++	.strings	= strings,
++};
++
++/*
++ * config descriptors are also handcrafted.  these must agree with code
++ * that sets configurations, and with code managing interfaces and their
++ * altsettings.  other complexity may come from:
++ *
++ *  - high speed support, including "other speed config" rules
++ *  - multiple configurations
++ *  - interfaces with alternate settings
++ *  - embedded class or vendor-specific descriptors
++ *
++ * this handles high speed, and has a second config that could as easily
++ * have been an alternate interface setting (on most hardware).
++ *
++ * NOTE:  to demonstrate (and test) more USB capabilities, this driver
++ * should include an altsetting to test interrupt transfers, including
++ * high bandwidth modes at high speed.  (Maybe work like Intel's test
++ * device?)
++ */
++static int
++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index)
++{
++	int len;
++	const struct usb_descriptor_header **function;
++	
++	function = z_function;
++	len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function);
++	if (len < 0)
++		return len;
++	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
++	return len;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_request *
++alloc_ep_req (struct usb_ep *ep, unsigned length)
++{
++	struct usb_request	*req;
++
++	req = usb_ep_alloc_request (ep, GFP_ATOMIC);
++	if (req) {
++		req->length = length;
++		req->buf = usb_ep_alloc_buffer (ep, length,
++				&req->dma, GFP_ATOMIC);
++		if (!req->buf) {
++			usb_ep_free_request (ep, req);
++			req = NULL;
++		}
++	}
++	return req;
++}
++
++static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
++{
++	if (req->buf)
++		usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
++	usb_ep_free_request (ep, req);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* optionally require specific source/sink data patterns  */
++
++static int
++check_read_data (
++	struct zero_dev		*dev,
++	struct usb_ep		*ep,
++	struct usb_request	*req
++)
++{
++	unsigned	i;
++	u8		*buf = req->buf;
++
++	for (i = 0; i < req->actual; i++, buf++) {
++		switch (pattern) {
++		/* all-zeroes has no synchronization issues */
++		case 0:
++			if (*buf == 0)
++				continue;
++			break;
++		/* mod63 stays in sync with short-terminated transfers,
++		 * or otherwise when host and gadget agree on how large
++		 * each usb transfer request should be.  resync is done
++		 * with set_interface or set_config.
++		 */
++		case 1:
++			if (*buf == (u8)(i % 63))
++				continue;
++			break;
++		}
++		ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
++		usb_ep_set_halt (ep);
++		return -EINVAL;
++	}
++	return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_reset_config (struct zero_dev *dev)
++{
++	if (dev->config == 0)
++		return;
++
++	DBG (dev, "reset config\n");
++
++	/* just disable endpoints, forcing completion of pending i/o.
++	 * all our completion handlers free their requests in this case.
++	 */
++	if (dev->in_ep) {
++		usb_ep_disable (dev->in_ep);
++		dev->in_ep = NULL;
++	}
++	if (dev->out_ep) {
++		usb_ep_disable (dev->out_ep);
++		dev->out_ep = NULL;
++	}
++	dev->config = 0;
++	del_timer (&dev->resume);
++}
++
++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos))
++
++static void 
++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req)
++{
++	struct zero_dev	*dev = ep->driver_data;
++	int		status = req->status;
++	int i, j;
++
++	switch (status) {
++
++	case 0: 			/* normal completion? */
++		//printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual);
++		for (i=0, j=rbuf_start; i<req->actual; i++) {
++			//printk ("%02x ", ((__u8*)req->buf)[i]);
++			rbuf[j] = ((__u8*)req->buf)[i];
++			j++;
++			if (j >= RBUF_LEN) j=0;
++		}
++		rbuf_start = j;
++		//printk ("\n\n");
++
++		if (rbuf_len < RBUF_LEN) {
++			rbuf_len += req->actual;
++			if (rbuf_len > RBUF_LEN) {
++				rbuf_len = RBUF_LEN;
++			}
++		}
++
++		break;
++
++	/* this endpoint is normally active while we're configured */
++	case -ECONNABORTED: 		/* hardware forced ep reset */
++	case -ECONNRESET:		/* request dequeued */
++	case -ESHUTDOWN:		/* disconnect from host */
++		VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
++				req->actual, req->length);
++		if (ep == dev->out_ep)
++			check_read_data (dev, ep, req);
++		free_ep_req (ep, req);
++		return;
++
++	case -EOVERFLOW:		/* buffer overrun on read means that
++					 * we didn't provide a big enough
++					 * buffer.
++					 */
++	default:
++#if 1
++		DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
++				status, req->actual, req->length);
++#endif
++	case -EREMOTEIO:		/* short read */
++		break;
++	}
++
++	status = usb_ep_queue (ep, req, GFP_ATOMIC);
++	if (status) {
++		ERROR (dev, "kill %s:  resubmit %d bytes --> %d\n",
++				ep->name, req->length, status);
++		usb_ep_set_halt (ep);
++		/* FIXME recover later ... somehow */
++	}
++}
++
++static struct usb_request *
++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags)
++{
++	struct usb_request	*req;
++	int			status;
++
++	req = alloc_ep_req (ep, 512);
++	if (!req)
++		return NULL;
++
++	req->complete = zero_isoc_complete;
++
++	status = usb_ep_queue (ep, req, gfp_flags);
++	if (status) {
++		struct zero_dev	*dev = ep->driver_data;
++
++		ERROR (dev, "start %s --> %d\n", ep->name, status);
++		free_ep_req (ep, req);
++		req = NULL;
++	}
++
++	return req;
++}
++
++/* change our operational config.  this code must agree with the code
++ * that returns config descriptors, and altsetting code.
++ *
++ * it's also responsible for power management interactions. some
++ * configurations might not work with our current power sources.
++ *
++ * note that some device controller hardware will constrain what this
++ * code can do, perhaps by disallowing more than one configuration or
++ * by limiting configuration choices (like the pxa2xx).
++ */
++static int
++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
++{
++	int			result = 0;
++	struct usb_gadget	*gadget = dev->gadget;
++	const struct usb_endpoint_descriptor	*d;
++	struct usb_ep		*ep;
++
++	if (number == dev->config)
++		return 0;
++
++	zero_reset_config (dev);
++
++	gadget_for_each_ep (ep, gadget) {
++
++		if (strcmp (ep->name, "ep4") == 0) {
++
++			d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6
++			result = usb_ep_enable (ep, d);
++
++			if (result == 0) {
++				ep->driver_data = dev;
++				dev->in_ep = ep;
++
++				if (zero_start_isoc_ep (ep, gfp_flags) != 0) {
++
++					dev->in_ep = ep;
++					continue;
++				}
++
++				usb_ep_disable (ep);
++				result = -EIO;
++			}
++		}
++
++	}
++
++	dev->config = number;
++	return result;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
++{
++	if (req->status || req->actual != req->length)
++		DBG ((struct zero_dev *) ep->driver_data,
++				"setup complete --> %d, %d/%d\n",
++				req->status, req->actual, req->length);
++}
++
++/*
++ * The setup() callback implements all the ep0 functionality that's
++ * not handled lower down, in hardware or the hardware driver (like
++ * device and endpoint feature flags, and their status).  It's all
++ * housekeeping for the gadget function we're implementing.  Most of
++ * the work is in config-specific setup.
++ */
++static int
++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++	struct usb_request	*req = dev->req;
++	int			value = -EOPNOTSUPP;
++
++	/* usually this stores reply data in the pre-allocated ep0 buffer,
++	 * but config change events will reconfigure hardware.
++	 */
++	req->zero = 0;
++	switch (ctrl->bRequest) {
++
++	case USB_REQ_GET_DESCRIPTOR:
++
++		switch (ctrl->wValue >> 8) {
++
++		case USB_DT_DEVICE:
++			value = min (ctrl->wLength, (u16) sizeof device_desc);
++			memcpy (req->buf, &device_desc, value);
++			break;
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++		case USB_DT_DEVICE_QUALIFIER:
++			if (!gadget->is_dualspeed)
++				break;
++			value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
++			memcpy (req->buf, &dev_qualifier, value);
++			break;
++
++		case USB_DT_OTHER_SPEED_CONFIG:
++			if (!gadget->is_dualspeed)
++				break;
++			// FALLTHROUGH
++#endif /* CONFIG_USB_GADGET_DUALSPEED */
++		case USB_DT_CONFIG:
++			value = config_buf (gadget, req->buf,
++					ctrl->wValue >> 8,
++					ctrl->wValue & 0xff);
++			if (value >= 0)
++				value = min (ctrl->wLength, (u16) value);
++			break;
++
++		case USB_DT_STRING:
++			/* wIndex == language code.
++			 * this driver only handles one language, you can
++			 * add string tables for other languages, using
++			 * any UTF-8 characters
++			 */
++			value = usb_gadget_get_string (&stringtab,
++					ctrl->wValue & 0xff, req->buf);
++			if (value >= 0) {
++				value = min (ctrl->wLength, (u16) value);
++			}
++			break;
++		}
++		break;
++
++	/* currently two configs, two speeds */
++	case USB_REQ_SET_CONFIGURATION:
++		if (ctrl->bRequestType != 0)
++			goto unknown;
++
++		spin_lock (&dev->lock);
++		value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC);
++		spin_unlock (&dev->lock);
++		break;
++	case USB_REQ_GET_CONFIGURATION:
++		if (ctrl->bRequestType != USB_DIR_IN)
++			goto unknown;
++		*(u8 *)req->buf = dev->config;
++		value = min (ctrl->wLength, (u16) 1);
++		break;
++
++	/* until we add altsetting support, or other interfaces,
++	 * only 0/0 are possible.  pxa2xx only supports 0/0 (poorly)
++	 * and already killed pending endpoint I/O.
++	 */
++	case USB_REQ_SET_INTERFACE:
++
++		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
++			goto unknown;
++		spin_lock (&dev->lock);
++		if (dev->config) {
++			u8		config = dev->config;
++
++			/* resets interface configuration, forgets about
++			 * previous transaction state (queued bufs, etc)
++			 * and re-inits endpoint state (toggle etc)
++			 * no response queued, just zero status == success.
++			 * if we had more than one interface we couldn't
++			 * use this "reset the config" shortcut.
++			 */
++			zero_reset_config (dev);
++			zero_set_config (dev, config, GFP_ATOMIC);
++			value = 0;
++		}
++		spin_unlock (&dev->lock);
++		break;
++	case USB_REQ_GET_INTERFACE:
++		if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) {
++			value = ctrl->wLength;
++			break;
++		}
++		else {
++			if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
++				goto unknown;
++			if (!dev->config)
++				break;
++			if (ctrl->wIndex != 0) {
++				value = -EDOM;
++				break;
++			}
++			*(u8 *)req->buf = 0;
++			value = min (ctrl->wLength, (u16) 1);
++		}
++		break;
++
++	/*
++	 * These are the same vendor-specific requests supported by
++	 * Intel's USB 2.0 compliance test devices.  We exceed that
++	 * device spec by allowing multiple-packet requests.
++	 */
++	case 0x5b:	/* control WRITE test -- fill the buffer */
++		if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
++			goto unknown;
++		if (ctrl->wValue || ctrl->wIndex)
++			break;
++		/* just read that many bytes into the buffer */
++		if (ctrl->wLength > USB_BUFSIZ)
++			break;
++		value = ctrl->wLength;
++		break;
++	case 0x5c:	/* control READ test -- return the buffer */
++		if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
++			goto unknown;
++		if (ctrl->wValue || ctrl->wIndex)
++			break;
++		/* expect those bytes are still in the buffer; send back */
++		if (ctrl->wLength > USB_BUFSIZ
++				|| ctrl->wLength != req->length)
++			break;
++		value = ctrl->wLength;
++		break;
++
++	case 0x01: // SET_CUR
++	case 0x02:
++	case 0x03:
++	case 0x04:
++	case 0x05:
++		value = ctrl->wLength;
++		break;
++	case 0x81:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0xe3;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x00;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x81;
++		//((u8*)req->buf)[1] = 0x81;
++		value = ctrl->wLength;
++		break;
++	case 0x82:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0xc3;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x00;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x82;
++		//((u8*)req->buf)[1] = 0x82;
++		value = ctrl->wLength;
++		break;
++	case 0x83:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0x00;
++			break;
++		case 0x0300:
++			((u8*)req->buf)[0] = 0x60;
++			break;
++		case 0x0500:	
++			((u8*)req->buf)[0] = 0x18;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x83;
++		//((u8*)req->buf)[1] = 0x83;
++		value = ctrl->wLength;
++		break;
++	case 0x84:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0x01;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x08;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x84;
++		//((u8*)req->buf)[1] = 0x84;
++		value = ctrl->wLength;
++		break;
++	case 0x85:
++		((u8*)req->buf)[0] = 0x85;
++		((u8*)req->buf)[1] = 0x85;
++		value = ctrl->wLength;
++		break;
++
++	
++	default:
++unknown:
++		printk("unknown control req%02x.%02x v%04x i%04x l%d\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			ctrl->wValue, ctrl->wIndex, ctrl->wLength);
++	}
++
++	/* respond with data transfer before status phase? */
++	if (value >= 0) {
++		req->length = value;
++		req->zero = value < ctrl->wLength
++				&& (value % gadget->ep0->maxpacket) == 0;
++		value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
++		if (value < 0) {
++			DBG (dev, "ep_queue < 0 --> %d\n", value);
++			req->status = 0;
++			zero_setup_complete (gadget->ep0, req);
++		}
++	}
++
++	/* device either stalls (value < 0) or reports success */
++	return value;
++}
++
++static void
++zero_disconnect (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++	unsigned long		flags;
++
++	spin_lock_irqsave (&dev->lock, flags);
++	zero_reset_config (dev);
++
++	/* a more significant application might have some non-usb
++	 * activities to quiesce here, saving resources like power
++	 * or pushing the notification up a network stack.
++	 */
++	spin_unlock_irqrestore (&dev->lock, flags);
++
++	/* next we may get setup() calls to enumerate new connections;
++	 * or an unbind() during shutdown (including removing module).
++	 */
++}
++
++static void
++zero_autoresume (unsigned long _dev)
++{
++	struct zero_dev	*dev = (struct zero_dev *) _dev;
++	int		status;
++
++	/* normally the host would be woken up for something
++	 * more significant than just a timer firing...
++	 */
++	if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
++		status = usb_gadget_wakeup (dev->gadget);
++		DBG (dev, "wakeup --> %d\n", status);
++	}
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_unbind (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	DBG (dev, "unbind\n");
++
++	/* we've already been disconnected ... no i/o is active */
++	if (dev->req)
++		free_ep_req (gadget->ep0, dev->req);
++	del_timer_sync (&dev->resume);
++	kfree (dev);
++	set_gadget_data (gadget, NULL);
++}
++
++static int
++zero_bind (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev;
++	//struct usb_ep		*ep;
++
++	printk("binding\n");
++	/*
++	 * DRIVER POLICY CHOICE:  you may want to do this differently.
++	 * One thing to avoid is reusing a bcdDevice revision code
++	 * with different host-visible configurations or behavior
++	 * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
++	 */
++	//device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
++
++
++	/* ok, we made sense of the hardware ... */
++	dev = kmalloc (sizeof *dev, SLAB_KERNEL);
++	if (!dev)
++		return -ENOMEM;
++	memset (dev, 0, sizeof *dev);
++	spin_lock_init (&dev->lock);
++	dev->gadget = gadget;
++	set_gadget_data (gadget, dev);
++
++	/* preallocate control response and buffer */
++	dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
++	if (!dev->req)
++		goto enomem;
++	dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
++				&dev->req->dma, GFP_KERNEL);
++	if (!dev->req->buf)
++		goto enomem;
++
++	dev->req->complete = zero_setup_complete;
++
++	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
++
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++	/* assume ep0 uses the same value for both speeds ... */
++	dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
++
++	/* and that all endpoints are dual-speed */
++	//hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
++	//hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
++#endif
++
++	usb_gadget_set_selfpowered (gadget);
++
++	init_timer (&dev->resume);
++	dev->resume.function = zero_autoresume;
++	dev->resume.data = (unsigned long) dev;
++
++	gadget->ep0->driver_data = dev;
++
++	INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
++	INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
++		EP_OUT_NAME, EP_IN_NAME);
++
++	snprintf (manufacturer, sizeof manufacturer,
++		UTS_SYSNAME " " UTS_RELEASE " with %s",
++		gadget->name);
++
++	return 0;
++
++enomem:
++	zero_unbind (gadget);
++	return -ENOMEM;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_suspend (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	if (gadget->speed == USB_SPEED_UNKNOWN)
++		return;
++
++	if (autoresume) {
++		mod_timer (&dev->resume, jiffies + (HZ * autoresume));
++		DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
++	} else
++		DBG (dev, "suspend\n");
++}
++
++static void
++zero_resume (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	DBG (dev, "resume\n");
++	del_timer (&dev->resume);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_gadget_driver zero_driver = {
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++	.speed		= USB_SPEED_HIGH,
++#else
++	.speed		= USB_SPEED_FULL,
++#endif
++	.function	= (char *) longname,
++	.bind		= zero_bind,
++	.unbind		= zero_unbind,
++
++	.setup		= zero_setup,
++	.disconnect	= zero_disconnect,
++
++	.suspend	= zero_suspend,
++	.resume		= zero_resume,
++
++	.driver 	= {
++		.name		= (char *) shortname,
++		// .shutdown = ...
++		// .suspend = ...
++		// .resume = ...
++	},
++};
++
++MODULE_AUTHOR ("David Brownell");
++MODULE_LICENSE ("Dual BSD/GPL");
++
++static struct proc_dir_entry *pdir, *pfile;
++
++static int isoc_read_data (char *page, char **start,
++			   off_t off, int count,
++			   int *eof, void *data)
++{
++	int i;
++	static int c = 0;
++	static int done = 0;
++	static int s = 0;
++
++/*
++	printk ("\ncount: %d\n", count);
++	printk ("rbuf_start: %d\n", rbuf_start);
++	printk ("rbuf_len: %d\n", rbuf_len);
++	printk ("off: %d\n", off);
++	printk ("start: %p\n\n", *start);
++*/
++	if (done) {
++		c = 0;
++		done = 0;
++		*eof = 1;
++		return 0;
++	}
++
++	if (c == 0) {
++		if (rbuf_len == RBUF_LEN)
++			s = rbuf_start;
++		else s = 0;
++	}
++
++	for (i=0; i<count && c<rbuf_len; i++, c++) {
++		page[i] = rbuf[(c+s) % RBUF_LEN];
++	}
++	*start = page;
++	
++	if (c >= rbuf_len) {
++		*eof = 1;
++		done = 1;
++	}
++
++
++	return i;
++}
++
++static int __init init (void)
++{
++
++	int retval = 0;
++
++	pdir = proc_mkdir("isoc_test", NULL);
++	if(pdir == NULL) {
++		retval = -ENOMEM;
++		printk("Error creating dir\n");
++		goto done;
++	}
++	pdir->owner = THIS_MODULE;
++
++	pfile = create_proc_read_entry("isoc_data",
++				       0444, pdir,
++				       isoc_read_data,
++				       NULL);
++	if (pfile == NULL) {
++		retval = -ENOMEM;
++		printk("Error creating file\n");
++		goto no_file;
++	}
++	pfile->owner = THIS_MODULE;
++
++	return usb_gadget_register_driver (&zero_driver);
++
++ no_file:
++	remove_proc_entry("isoc_data", NULL);
++ done:
++	return retval;
++}
++module_init (init);
++
++static void __exit cleanup (void)
++{
++
++	usb_gadget_unregister_driver (&zero_driver);
++	
++	remove_proc_entry("isoc_data", pdir);
++	remove_proc_entry("isoc_test", NULL);
++}
++module_exit (cleanup);
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_cfi_common.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_cfi_common.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_cfi_common.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_cfi_common.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,142 @@
++/* ==========================================================================
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CFI_COMMON_H__)
++#define __DWC_CFI_COMMON_H__
++
++//#include <linux/types.h>
++
++/**
++ * @file 
++ *
++ * This file contains the CFI specific common constants, interfaces
++ * (functions and macros) and structures for Linux. No PCD specific
++ * data structure or definition is to be included in this file.
++ *
++ */
++
++/** This is a request for all Core Features */
++#define VEN_CORE_GET_FEATURES		0xB1
++
++/** This is a request to get the value of a specific Core Feature */
++#define VEN_CORE_GET_FEATURE		0xB2
++
++/** This command allows the host to set the value of a specific Core Feature */
++#define VEN_CORE_SET_FEATURE		0xB3
++
++/** This command allows the host to set the default values of 
++ * either all or any specific Core Feature 
++ */
++#define VEN_CORE_RESET_FEATURES		0xB4
++
++/** This command forces the PCD to write the deferred values of a Core Features */
++#define VEN_CORE_ACTIVATE_FEATURES	0xB5
++
++/** This request reads a DWORD value from a register at the specified offset */
++#define VEN_CORE_READ_REGISTER		0xB6
++
++/** This request writes a DWORD value into a register at the specified offset */
++#define VEN_CORE_WRITE_REGISTER		0xB7
++
++/** This structure is the header of the Core Features dataset returned to 
++ *  the Host
++ */
++struct cfi_all_features_header {
++/** The features header structure length is */
++#define CFI_ALL_FEATURES_HDR_LEN		8
++	/**
++	 * The total length of the features dataset returned to the Host 
++	 */
++	uint16_t wTotalLen;
++
++	/**
++	 * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H).
++	 * This field identifies the version of the CFI Specification with which 
++	 * the device is compliant.
++	 */
++	uint16_t wVersion;
++
++	/** The ID of the Core */
++	uint16_t wCoreID;
++#define CFI_CORE_ID_UDC		1
++#define CFI_CORE_ID_OTG		2
++#define CFI_CORE_ID_WUDEV	3
++
++	/** Number of features returned by VEN_CORE_GET_FEATURES request */
++	uint16_t wNumFeatures;
++} UPACKED;
++
++typedef struct cfi_all_features_header cfi_all_features_header_t;
++
++/** This structure is a header of the Core Feature descriptor dataset returned to 
++ *  the Host after the VEN_CORE_GET_FEATURES request
++ */
++struct cfi_feature_desc_header {
++#define CFI_FEATURE_DESC_HDR_LEN	8
++
++	/** The feature ID */
++	uint16_t wFeatureID;
++
++	/** Length of this feature descriptor in bytes - including the
++	 * length of the feature name string
++	 */
++	uint16_t wLength;
++
++	/** The data length of this feature in bytes */
++	uint16_t wDataLength;
++
++	/** 
++	 * Attributes of this features 
++	 * D0: Access rights
++	 * 0 - Read/Write
++	 * 1 - Read only
++	 */
++	uint8_t bmAttributes;
++#define CFI_FEATURE_ATTR_RO		1
++#define CFI_FEATURE_ATTR_RW		0
++
++	/** Length of the feature name in bytes */
++	uint8_t bNameLen;
++
++	/** The feature name buffer */
++	//uint8_t *name;
++} UPACKED;
++
++typedef struct cfi_feature_desc_header cfi_feature_desc_header_t;
++
++/**
++ * This structure describes a NULL terminated string referenced by its id field.
++ * It is very similar to usb_string structure but has the id field type set to 16-bit.
++ */
++struct cfi_string {
++	uint16_t id;
++	const uint8_t *s;
++};
++typedef struct cfi_string cfi_string_t;
++
++#endif
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_adp.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_adp.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_adp.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_adp.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,854 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $
++ * $Revision: #12 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#include "dwc_os.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_adp.h"
++
++/** @file
++ *
++ * This file contains the most of the Attach Detect Protocol implementation for
++ * the driver to support OTG Rev2.0.
++ *
++ */
++
++void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value)
++{
++	adpctl_data_t adpctl;
++
++	adpctl.d32 = value;
++	adpctl.b.ar = 0x2;
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32);
++
++	while (adpctl.b.ar) {
++		adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl);
++	}
++
++}
++
++/**
++ * Function is called to read ADP registers
++ */
++uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	adpctl.d32 = 0;
++	adpctl.b.ar = 0x1;
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32);
++
++	while (adpctl.b.ar) {
++		adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl);
++	}
++
++	return adpctl.d32;
++}
++
++/**
++ * Function is called to read ADPCTL register and filter Write-clear bits
++ */
++uint32_t dwc_otg_adp_read_reg_filter(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_tmout_int = 0;
++	adpctl.b.adp_prb_int = 0;
++	adpctl.b.adp_tmout_int = 0;
++		
++	return adpctl.d32;
++}
++
++/**
++ * Function is called to write ADP registers
++ */
++void dwc_otg_adp_modify_reg(dwc_otg_core_if_t * core_if, uint32_t clr,
++			    uint32_t set)
++{
++	dwc_otg_adp_write_reg(core_if,
++			      (dwc_otg_adp_read_reg(core_if) & (~clr)) | set);
++}
++
++static void adp_sense_timeout(void *ptr)
++{
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++	core_if->adp.sense_timer_started = 0;
++	DWC_PRINTF("ADP SENSE TIMEOUT\n");
++	if (core_if->adp_enable) {
++		dwc_otg_adp_sense_stop(core_if);
++		dwc_otg_adp_probe_start(core_if);
++	}
++}
++
++/**
++ * This function is called when the ADP vbus timer expires. Timeout is 1.1s.
++ */
++static void adp_vbuson_timeout(void *ptr)
++{
++	gpwrdn_data_t gpwrdn;
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++	hprt0_data_t hprt0 = {.d32 = 0 };
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	DWC_PRINTF("%s: 1.1 seconds expire after turning on VBUS\n",__FUNCTION__);
++	if (core_if) {
++		core_if->adp.vbuson_timer_started = 0;
++		/* Turn off vbus */
++		hprt0.b.prtpwr = 1;
++		DWC_MODIFY_REG32(core_if->host_if->hprt0, hprt0.d32, 0);
++		gpwrdn.d32 = 0;
++
++		/* Power off the core */
++		if (core_if->power_down == 2) {
++			/* Enable Wakeup Logic */
++//                      gpwrdn.b.wkupactiv = 1;
++			gpwrdn.b.pmuactv = 0;
++			gpwrdn.b.pwrdnrstn = 1;
++			gpwrdn.b.pwrdnclmp = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++
++			/* Suspend the Phy Clock */
++			pcgcctl.b.stoppclk = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++			/* Switch on VDD */
++//                      gpwrdn.b.wkupactiv = 1;
++			gpwrdn.b.pmuactv = 1;
++			gpwrdn.b.pwrdnrstn = 1;
++			gpwrdn.b.pwrdnclmp = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++		} else {
++			/* Enable Power Down Logic */
++			gpwrdn.b.pmuintsel = 1;
++			gpwrdn.b.pmuactv = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		}
++
++		/* Power off the core */
++		if (core_if->power_down == 2) {
++			gpwrdn.d32 = 0;
++			gpwrdn.b.pwrdnswtch = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn,
++					 gpwrdn.d32, 0);
++		}
++
++		/* Unmask SRP detected interrupt from Power Down Logic */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.srp_det_msk = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++
++		dwc_otg_adp_probe_start(core_if);
++		dwc_otg_dump_global_registers(core_if);
++		dwc_otg_dump_host_registers(core_if);
++	}
++
++}
++
++/**
++ * Start the ADP Initial Probe timer to detect if Port Connected interrupt is 
++ * not asserted within 1.1 seconds.
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++void dwc_otg_adp_vbuson_timer_start(dwc_otg_core_if_t * core_if)
++{
++	core_if->adp.vbuson_timer_started = 1;
++	if (core_if->adp.vbuson_timer)
++	{
++		DWC_PRINTF("SCHEDULING VBUSON TIMER\n");
++		/* 1.1 secs + 60ms necessary for cil_hcd_start*/
++		DWC_TIMER_SCHEDULE(core_if->adp.vbuson_timer, 1160);
++	} else {
++		DWC_WARN("VBUSON_TIMER = %p\n",core_if->adp.vbuson_timer);
++	}
++}
++
++#if 0
++/**
++ * Masks all DWC OTG core interrupts
++ *
++ */
++static void mask_all_interrupts(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++
++	/* Mask Host Interrupts */
++
++	/* Clear and disable HCINTs */
++	for (i = 0; i < core_if->core_params->host_channels; i++) {
++		DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, 0);
++		DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcint, 0xFFFFFFFF);
++
++	}
++
++	/* Clear and disable HAINT */
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, 0x0000);
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haint, 0xFFFFFFFF);
++
++	/* Mask Device Interrupts */
++	if (!core_if->multiproc_int_enable) {
++		/* Clear and disable IN Endpoint interrupts */
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, 0);
++		for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->
++					diepint, 0xFFFFFFFF);
++		}
++
++		/* Clear and disable OUT Endpoint interrupts */
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 0);
++		for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->
++					doepint, 0xFFFFFFFF);
++		}
++
++		/* Clear and disable DAINT */
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daint,
++				0xFFFFFFFF);
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, 0);
++	} else {
++		for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					diepeachintmsk[i], 0);
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->
++					diepint, 0xFFFFFFFF);
++		}
++
++		for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					doepeachintmsk[i], 0);
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->
++					doepint, 0xFFFFFFFF);
++		}
++
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachintmsk,
++				0);
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachint,
++				0xFFFFFFFF);
++
++	}
++
++	/* Disable interrupts */
++	ahbcfg.b.glblintrmsk = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++
++	/* Disable all interrupts. */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Clear any pending OTG Interrupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, 0xFFFFFFFF);
++}
++
++/**
++ * Unmask Port Connection Detected interrupt
++ *
++ */
++static void unmask_conn_det_intr(dwc_otg_core_if_t * core_if)
++{
++	gintmsk_data_t gintmsk = {.d32 = 0,.b.portintr = 1 };
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++}
++#endif
++
++/**
++ * Starts the ADP Probing
++ *
++ * @param core_if the pointer to core_if structure.
++ */
++uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if)
++{
++
++	adpctl_data_t adpctl = {.d32 = 0};
++	gpwrdn_data_t gpwrdn;
++#if 0
++	adpctl_data_t adpctl_int = {.d32 = 0, .b.adp_prb_int = 1,
++								.b.adp_sns_int = 1, b.adp_tmout_int};
++#endif
++	dwc_otg_disable_global_interrupts(core_if);
++	DWC_PRINTF("ADP Probe Start\n");
++	core_if->adp.probe_enabled = 1;
++
++	adpctl.b.adpres = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	while (adpctl.b.adpres) {
++		adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	}
++
++	adpctl.d32 = 0;
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++	/* In Host mode unmask SRP detected interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.sts_chngint_msk = 1;
++	if (!gpwrdn.b.idsts) {
++		gpwrdn.b.srp_det_msk = 1;
++	}
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++
++	adpctl.b.adp_tmout_int_msk = 1;
++	adpctl.b.adp_prb_int_msk = 1;
++	adpctl.b.prb_dschg = 1;
++	adpctl.b.prb_delta = 1;
++	adpctl.b.prb_per = 1;
++	adpctl.b.adpen = 1;
++	adpctl.b.enaprb = 1;
++
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++	DWC_PRINTF("ADP Probe Finish\n");
++	return 0;
++}
++
++/**
++ * Starts the ADP Sense timer to detect if ADP Sense interrupt is not asserted 
++ * within 3 seconds.
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++void dwc_otg_adp_sense_timer_start(dwc_otg_core_if_t * core_if)
++{
++	core_if->adp.sense_timer_started = 1;
++	DWC_TIMER_SCHEDULE(core_if->adp.sense_timer, 3000 /* 3 secs */ );
++}
++
++/**
++ * Starts the ADP Sense
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	DWC_PRINTF("ADP Sense Start\n");
++
++	/* Unmask ADP sense interrupt and mask all other from the core */
++	adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
++	adpctl.b.adp_sns_int_msk = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++	dwc_otg_disable_global_interrupts(core_if); // vahrama 
++
++	/* Set ADP reset bit*/
++	adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
++	adpctl.b.adpres = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	while (adpctl.b.adpres) {
++		adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	}
++
++	adpctl.b.adpres = 0;
++	adpctl.b.adpen = 1;
++	adpctl.b.enasns = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	dwc_otg_adp_sense_timer_start(core_if);
++
++	return 0;
++}
++
++/**
++ * Stops the ADP Probing
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if)
++{
++
++	adpctl_data_t adpctl;
++	DWC_PRINTF("Stop ADP probe\n");
++	core_if->adp.probe_enabled = 0;
++	core_if->adp.probe_counter = 0;
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++
++	adpctl.b.adpen = 0;
++	adpctl.b.adp_prb_int = 1;
++	adpctl.b.adp_tmout_int = 1;
++	adpctl.b.adp_sns_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * Stops the ADP Sensing
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	core_if->adp.sense_enabled = 0;
++
++	adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
++	adpctl.b.enasns = 0;
++	adpctl.b.adp_sns_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * Called to turn on the VBUS after initial ADP probe in host mode.
++ * If port power was already enabled in cil_hcd_start function then
++ * only schedule a timer.
++ *
++ * @param core_if the pointer to core_if structure.
++ */
++void dwc_otg_adp_turnon_vbus(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0 = {.d32 = 0 };
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	DWC_PRINTF("Turn on VBUS for 1.1s, port power is %d\n", hprt0.b.prtpwr);
++
++	if (hprt0.b.prtpwr == 0) {
++		hprt0.b.prtpwr = 1;
++		//DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	}
++	
++	dwc_otg_adp_vbuson_timer_start(core_if);
++}
++
++/**
++ * Called right after driver is loaded
++ * to perform initial actions for ADP
++ *
++ * @param core_if the pointer to core_if structure.
++ * @param is_host - flag for current mode of operation either from GINTSTS or GPWRDN
++ */
++void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host)
++{
++	gpwrdn_data_t gpwrdn;
++
++	DWC_PRINTF("ADP Initial Start\n");
++	core_if->adp.adp_started = 1;
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++	dwc_otg_disable_global_interrupts(core_if);
++	if (is_host) {
++		DWC_PRINTF("HOST MODE\n");
++		/* Enable Power Down Logic Interrupt*/
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuintsel = 1;
++		gpwrdn.b.pmuactv = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		/* Initialize first ADP probe to obtain Ramp Time value */
++		core_if->adp.initial_probe = 1;
++		dwc_otg_adp_probe_start(core_if);
++	} else {
++		gotgctl_data_t gotgctl;
++		gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++		DWC_PRINTF("DEVICE MODE\n");
++		if (gotgctl.b.bsesvld == 0) {
++			/* Enable Power Down Logic Interrupt*/
++			gpwrdn.d32 = 0;
++			DWC_PRINTF("VBUS is not valid - start ADP probe\n");
++			gpwrdn.b.pmuintsel = 1;
++			gpwrdn.b.pmuactv = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++			core_if->adp.initial_probe = 1;
++			dwc_otg_adp_probe_start(core_if);
++		} else {
++			DWC_PRINTF("VBUS is valid - initialize core as a Device\n");
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++			dwc_otg_dump_global_registers(core_if);
++			dwc_otg_dump_dev_registers(core_if);
++		}
++	}
++}
++
++void dwc_otg_adp_init(dwc_otg_core_if_t * core_if)
++{
++	core_if->adp.adp_started = 0;
++	core_if->adp.initial_probe = 0;
++	core_if->adp.probe_timer_values[0] = -1;
++	core_if->adp.probe_timer_values[1] = -1;
++	core_if->adp.probe_enabled = 0;
++	core_if->adp.sense_enabled = 0;
++	core_if->adp.sense_timer_started = 0;
++	core_if->adp.vbuson_timer_started = 0;
++	core_if->adp.probe_counter = 0;
++	core_if->adp.gpwrdn = 0;
++	core_if->adp.attached = DWC_OTG_ADP_UNKOWN;
++	/* Initialize timers */
++	core_if->adp.sense_timer =
++	    DWC_TIMER_ALLOC("ADP SENSE TIMER", adp_sense_timeout, core_if);
++	core_if->adp.vbuson_timer =
++	    DWC_TIMER_ALLOC("ADP VBUS ON TIMER", adp_vbuson_timeout, core_if);
++	if (!core_if->adp.sense_timer || !core_if->adp.vbuson_timer)
++	{
++		DWC_ERROR("Could not allocate memory for ADP timers\n");
++	}
++}
++
++void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = { .d32 = 0 };
++	gpwrdn.b.pmuintsel = 1;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	if (core_if->adp.probe_enabled)		
++		dwc_otg_adp_probe_stop(core_if);
++	if (core_if->adp.sense_enabled)		
++		dwc_otg_adp_sense_stop(core_if);
++	if (core_if->adp.sense_timer_started)		
++		DWC_TIMER_CANCEL(core_if->adp.sense_timer);
++	if (core_if->adp.vbuson_timer_started)		
++		DWC_TIMER_CANCEL(core_if->adp.vbuson_timer);
++	DWC_TIMER_FREE(core_if->adp.sense_timer);
++	DWC_TIMER_FREE(core_if->adp.vbuson_timer);
++}
++
++/////////////////////////////////////////////////////////////////////
++////////////// ADP Interrupt Handlers ///////////////////////////////
++/////////////////////////////////////////////////////////////////////
++/**
++ * This function sets Ramp Timer values
++ */
++static uint32_t set_timer_value(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	if (core_if->adp.probe_timer_values[0] == -1) {
++		core_if->adp.probe_timer_values[0] = val;
++		core_if->adp.probe_timer_values[1] = -1;
++		return 1;
++	} else {
++		core_if->adp.probe_timer_values[1] =
++		    core_if->adp.probe_timer_values[0];
++		core_if->adp.probe_timer_values[0] = val;
++		return 0;
++	}
++}
++
++/**
++ * This function compares Ramp Timer values
++ */
++static uint32_t compare_timer_values(dwc_otg_core_if_t * core_if)
++{
++	uint32_t diff;
++	if (core_if->adp.probe_timer_values[0]>=core_if->adp.probe_timer_values[1])
++			diff = core_if->adp.probe_timer_values[0]-core_if->adp.probe_timer_values[1];
++	else
++			diff = core_if->adp.probe_timer_values[1]-core_if->adp.probe_timer_values[0];   	
++	if(diff < 2) {
++		return 0;
++	} else {
++		return 1;
++	}
++}
++
++/**
++ * This function handles ADP Probe Interrupts
++ */
++static int32_t dwc_otg_adp_handle_prb_intr(dwc_otg_core_if_t * core_if,
++						 uint32_t val)
++{
++	adpctl_data_t adpctl = {.d32 = 0 };
++	gpwrdn_data_t gpwrdn, temp;
++	adpctl.d32 = val;
++
++	temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	core_if->adp.probe_counter++;
++	core_if->adp.gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (adpctl.b.rtim == 0 && !temp.b.idsts){
++		DWC_PRINTF("RTIM value is 0\n");	
++		goto exit;
++	}
++	if (set_timer_value(core_if, adpctl.b.rtim) &&
++	    core_if->adp.initial_probe) {
++		core_if->adp.initial_probe = 0;
++		dwc_otg_adp_probe_stop(core_if);
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuactv = 1;
++		gpwrdn.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++		/* check which value is for device mode and which for Host mode */
++		if (!temp.b.idsts) {	/* considered host mode value is 0 */
++			/*
++			 * Turn on VBUS after initial ADP probe.
++			 */
++			core_if->op_state = A_HOST;
++			dwc_otg_enable_global_interrupts(core_if);
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_hcd_start(core_if);
++			dwc_otg_adp_turnon_vbus(core_if);
++			DWC_SPINLOCK(core_if->lock);
++		} else {
++			/*
++			 * Initiate SRP after initial ADP probe.
++			 */
++			dwc_otg_enable_global_interrupts(core_if);
++			dwc_otg_initiate_srp(core_if);
++		}
++	} else if (core_if->adp.probe_counter > 2){
++		gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++		if (compare_timer_values(core_if)) {
++			DWC_PRINTF("Difference in timer values !!! \n");
++//                      core_if->adp.attached = DWC_OTG_ADP_ATTACHED;
++			dwc_otg_adp_probe_stop(core_if);
++
++			/* Power on the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++			}
++
++			/* check which value is for device mode and which for Host mode */
++			if (!temp.b.idsts) {	/* considered host mode value is 0 */
++				/* Disable Interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Host mode.
++				 */
++				core_if->op_state = A_HOST;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_hcd_start(core_if);
++			} else {
++				gotgctl_data_t gotgctl;
++				/* Mask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, gpwrdn.d32, 0);
++
++				/* Disable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Device mode.
++				 */
++				core_if->op_state = B_PERIPHERAL;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_pcd_start(core_if);
++
++				gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++				if (!gotgctl.b.bsesvld) {
++					dwc_otg_initiate_srp(core_if);
++				}
++			}
++		}
++		if (core_if->power_down == 2) {
++			if (gpwrdn.b.bsessvld) {
++				/* Mask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++				
++				/* Disable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Device mode.
++				 */
++				core_if->op_state = B_PERIPHERAL;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_pcd_start(core_if);
++			}
++		}
++	}
++exit:
++	/* Clear interrupt */
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_prb_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * This function hadles ADP Sense Interrupt
++ */
++static int32_t dwc_otg_adp_handle_sns_intr(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++	/* Stop ADP Sense timer */
++	DWC_TIMER_CANCEL(core_if->adp.sense_timer);
++
++	/* Restart ADP Sense timer */
++	dwc_otg_adp_sense_timer_start(core_if);
++	
++	/* Clear interrupt */
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_sns_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * This function handles ADP Probe Interrupts
++ */
++static int32_t dwc_otg_adp_handle_prb_tmout_intr(dwc_otg_core_if_t * core_if,
++						 uint32_t val)
++{
++	adpctl_data_t adpctl = {.d32 = 0 };
++	adpctl.d32 = val;
++	set_timer_value(core_if, adpctl.b.rtim);
++	
++	/* Clear interrupt */
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_tmout_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * ADP Interrupt handler.
++ *
++ */
++int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if)
++{
++	int retval = 0;
++	adpctl_data_t adpctl = {.d32 = 0};
++
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	DWC_PRINTF("ADPCTL = %08x\n",adpctl.d32);
++
++	if (adpctl.b.adp_sns_int & adpctl.b.adp_sns_int_msk) {
++		DWC_PRINTF("ADP Sense interrupt\n");
++		retval |= dwc_otg_adp_handle_sns_intr(core_if);
++	}
++	if (adpctl.b.adp_tmout_int & adpctl.b.adp_tmout_int_msk) {
++		DWC_PRINTF("ADP timeout interrupt\n");
++		retval |= dwc_otg_adp_handle_prb_tmout_intr(core_if, adpctl.d32);
++	}
++	if (adpctl.b.adp_prb_int & adpctl.b.adp_prb_int_msk) {
++		DWC_PRINTF("ADP Probe interrupt\n");
++		adpctl.b.adp_prb_int = 1;	
++		retval |= dwc_otg_adp_handle_prb_intr(core_if, adpctl.d32);
++	}
++
++//	dwc_otg_adp_modify_reg(core_if, adpctl.d32, 0);
++	//dwc_otg_adp_write_reg(core_if, adpctl.d32);
++	DWC_PRINTF("RETURN FROM ADP ISR\n");
++
++	return retval;
++}
++
++/**
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if)
++{
++
++#ifndef DWC_HOST_ONLY
++	hprt0_data_t hprt0;
++	gpwrdn_data_t gpwrdn;
++	DWC_DEBUGPL(DBG_ANY, "++ Power Down Logic Session Request Interrupt++\n");
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	/* check which value is for device mode and which for Host mode */
++	if (!gpwrdn.b.idsts) {	/* considered host mode value is 0 */
++		DWC_PRINTF("SRP: Host mode\n");
++
++		if (core_if->adp_enable) {
++			dwc_otg_adp_probe_stop(core_if);
++
++			/* Power on the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++			}
++
++			core_if->op_state = A_HOST;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_hcd_start(core_if);
++		}
++
++		/* Turn on the port power bit. */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtpwr = 1;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++		/* Start the Connection timer. So a message can be displayed
++		 * if connect does not occur within 10 seconds. */
++		cil_hcd_session_start(core_if);
++	} else {
++		DWC_PRINTF("SRP: Device mode %s\n", __FUNCTION__);
++		if (core_if->adp_enable) {
++			dwc_otg_adp_probe_stop(core_if);
++
++			/* Power on the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++			}
++
++			gpwrdn.d32 = 0;
++			gpwrdn.b.pmuactv = 0;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++		}
++	}
++#endif
++	return 1;
++}
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_adp.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_adp.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_adp.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_adp.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,80 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $
++ * $Revision: #7 $
++ * $Date: 2011/10/24 $
++ * $Change: 1871159 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_ADP_H__
++#define __DWC_OTG_ADP_H__
++
++/**
++ * @file
++ *
++ * This file contains the Attach Detect Protocol interfaces and defines
++ * (functions) and structures for Linux.
++ *
++ */
++
++#define DWC_OTG_ADP_UNATTACHED	0
++#define DWC_OTG_ADP_ATTACHED	1
++#define DWC_OTG_ADP_UNKOWN	2
++
++typedef struct dwc_otg_adp {
++	uint32_t adp_started;	
++	uint32_t initial_probe;
++	int32_t probe_timer_values[2];
++	uint32_t probe_enabled;
++	uint32_t sense_enabled;
++	dwc_timer_t *sense_timer;
++	uint32_t sense_timer_started;
++	dwc_timer_t *vbuson_timer;
++	uint32_t vbuson_timer_started;
++	uint32_t attached;
++	uint32_t probe_counter;
++	uint32_t gpwrdn;
++} dwc_otg_adp_t;
++
++/**
++ * Attach Detect Protocol functions
++ */
++
++extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value);
++extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host);
++extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if);
++extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if);
++extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if);
++
++#endif //__DWC_OTG_ADP_H__
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_attr.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_attr.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_attr.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_attr.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1210 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
++ * $Revision: #44 $
++ * $Date: 2010/11/29 $
++ * $Change: 1636033 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.  The Linux driver attributes
++ * feature will be used to provide the Linux Diagnostic
++ * Interface. These attributes are accessed through sysfs.
++ */
++
++/** @page "Linux Module Attributes"
++ *
++ * The Linux module attributes feature is used to provide the Linux
++ * Diagnostic Interface.  These attributes are accessed through sysfs.
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.
++
++ The following table shows the attributes.
++ <table>
++ <tr>
++ <td><b> Name</b></td>
++ <td><b> Description</b></td>
++ <td><b> Access</b></td>
++ </tr>
++
++ <tr>
++ <td> mode </td>
++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hnpcapable </td>
++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srpcapable </td>
++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hsic_connect </td>
++ <td> Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> inv_sel_hsic </td>
++ <td> Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hnp </td>
++ <td> Initiates the Host Negotiation Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srp </td>
++ <td> Initiates the Session Request Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> buspower </td>
++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> bussuspend </td>
++ <td> Suspends the USB bus.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> busconnected </td>
++ <td> Gets the connection status of the bus</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> gotgctl </td>
++ <td> Gets or sets the Core Control Status Register.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gusbcfg </td>
++ <td> Gets or sets the Core USB Configuration Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> grxfsiz </td>
++ <td> Gets or sets the Receive FIFO Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gnptxfsiz </td>
++ <td> Gets or sets the non-periodic Transmit Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gpvndctl </td>
++ <td> Gets or sets the PHY Vendor Control Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> ggpio </td>
++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
++ or sets the upper 16 bits.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> guid </td>
++ <td> Gets or sets the value of the User ID Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gsnpsid </td>
++ <td> Gets the value of the Synopsys ID Regester</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> devspeed </td>
++ <td> Gets or sets the device speed setting in the DCFG register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> enumspeed </td>
++ <td> Gets the device enumeration Speed.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hptxfsiz </td>
++ <td> Gets the value of the Host Periodic Transmit FIFO</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hprt0 </td>
++ <td> Gets or sets the value in the Host Port Control and Status Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regoffset </td>
++ <td> Sets the register offset for the next Register Access</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regvalue </td>
++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> remote_wakeup </td>
++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
++ Wakeup signalling bit in the Device Control Register is set for 1
++ milli-second.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> rem_wakeup_pwrdn </td>
++ <td> On read, shows the status core - hibernated or not. On write, initiates 
++ a remote wakeup of the device from Hibernation. </td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> mode_ch_tim_en </td>
++ <td> This bit is used to enable or disable the host core to wait for 200 PHY 
++ clock cycles at the end of Resume to change the opmode signal to the PHY to 00
++ after Suspend or LPM. </td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> fr_interval </td>
++ <td> On read, shows the value of HFIR Frame Interval. On write, dynamically 
++ reload HFIR register during runtime. The application can write a value to this
++ register only after the Port Enable bit of the Host Port Control and Status 
++ register (HPRT.PrtEnaPort) has been set </td>
++ <td> Read/Write</td>
++ </tr>
++ 
++ <tr>
++ <td> disconnect_us </td>
++ <td> On read, shows the status of disconnect_device_us. On write, sets disconnect_us
++ which causes soft disconnect for 100us. Applicable only for device mode of operation.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> spramdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcddump </td>
++ <td> Dumps the current HCD state.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcd_frrem </td>
++ <td> Shows the average value of the Frame Remaining
++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
++ occurs. This can be used to determine the average interrupt latency. Also
++ shows the average Frame Remaining value for start_transfer and the "a" and
++ "b" sample points. The "a" and "b" sample points may be used during debugging
++ bto determine how long it takes to execute a section of the HCD code.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> rd_reg_test </td>
++ <td> Displays the time required to read the GNPTXFSIZ register many times
++ (the output shows the number of times the register is read).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> wr_reg_test </td>
++ <td> Displays the time required to write the GNPTXFSIZ register many times
++ (the output shows the number of times the register is written).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> lpm_response </td>
++ <td> Gets or sets lpm_response mode. Applicable only in device mode.
++ <td> Write</td>
++ </tr>
++
++ <tr>
++ <td> sleep_status </td>
++ <td> Shows sleep status of device.
++ <td> Read</td>
++ </tr>
++
++ </table>
++
++ Example usage:
++ To get the current mode:
++ cat /sys/devices/lm0/mode
++
++ To power down the USB:
++ echo 0 > /sys/devices/lm0/buspower
++ */
++
++#include "dwc_otg_os_dep.h"
++#include "dwc_os.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_core_if.h"
++#include "dwc_otg_pcd_if.h"
++#include "dwc_otg_hcd_if.h"
++
++/*
++ * MACROs for defining sysfs attribute
++ */
++#ifdef LM_INTERFACE
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);		\
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
++	return count; \
++}
++
++#elif defined(PCI_INTERFACE)
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);	\
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);  \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
++	return count; \
++}
++
++#elif defined(PLATFORM_INTERFACE)
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++        struct platform_device *platform_dev = \
++                container_of(_dev, struct platform_device, dev); \
++        dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev);  \
++	uint32_t val; \
++	DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \
++                    __func__, _dev, platform_dev, otg_dev); \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++        struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
++        dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
++	return count; \
++}
++#endif
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#ifdef LM_INTERFACE
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
++	return count; \
++}
++#elif defined(PCI_INTERFACE)
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);  \
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);  \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
++	return count; \
++}
++
++#elif defined(PLATFORM_INTERFACE)
++#include "dwc_otg_dbg.h"
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
++	uint32_t val; \
++	DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \
++                    __func__, _dev, platform_dev, otg_dev); \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
++	return count; \
++}
++
++#endif
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++/** @name Functions for Show/Store of Attributes */
++/**@{*/
++
++/**
++ * Helper function returning the otg_device structure of the given device
++ */
++static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev)
++{
++        dwc_otg_device_t *otg_dev;
++        DWC_OTG_GETDRVDEV(otg_dev, _dev);
++        return otg_dev;
++}
++
++/**
++ * Show the register offset of the Register Access.
++ */
++static ssize_t regoffset_show(struct device *_dev,
++			      struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n",
++			otg_dev->os_dep.reg_offset);
++}
++
++/**
++ * Set the register offset for the next Register Access 	Read/Write
++ */
++static ssize_t regoffset_store(struct device *_dev,
++			       struct device_attribute *attr,
++			       const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t offset = simple_strtoul(buf, NULL, 16);
++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
++	if (offset < SZ_256K) {
++#elif  defined(PCI_INTERFACE)
++	if (offset < 0x00040000) {
++#endif
++		otg_dev->os_dep.reg_offset = offset;
++	} else {
++		dev_err(_dev, "invalid offset\n");
++	}
++
++	return count;
++}
++
++DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store);
++
++/**
++ * Show the value of the register at the offset in the reg_offset
++ * attribute.
++ */
++static ssize_t regvalue_show(struct device *_dev,
++			     struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val;
++	volatile uint32_t *addr;
++
++	if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) {
++		/* Calculate the address */
++		addr = (uint32_t *) (otg_dev->os_dep.reg_offset +
++				     (uint8_t *) otg_dev->os_dep.base);
++		val = DWC_READ_REG32(addr);
++		return snprintf(buf,
++				sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1,
++				"Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset,
++				val);
++	} else {
++		dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset);
++		return sprintf(buf, "invalid offset\n");
++	}
++}
++
++/**
++ * Store the value in the register at the offset in the reg_offset
++ * attribute.
++ *
++ */
++static ssize_t regvalue_store(struct device *_dev,
++			      struct device_attribute *attr,
++			      const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	volatile uint32_t *addr;
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
++	if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) {
++		/* Calculate the address */
++		addr = (uint32_t *) (otg_dev->os_dep.reg_offset +
++				     (uint8_t *) otg_dev->os_dep.base);
++		DWC_WRITE_REG32(addr, val);
++	} else {
++		dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
++			otg_dev->os_dep.reg_offset);
++	}
++	return count;
++}
++
++DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store);
++
++/*
++ * Attributes
++ */
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC");
++
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected");
++
++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,
++			     &(otg_dev->core_if->core_global_regs->gusbcfg),
++			     "GUSBCFG");
++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,
++			     &(otg_dev->core_if->core_global_regs->grxfsiz),
++			     "GRXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,
++			     &(otg_dev->core_if->core_global_regs->gnptxfsiz),
++			     "GNPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,
++			     &(otg_dev->core_if->core_global_regs->gpvndctl),
++			     "GPVNDCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,
++			     &(otg_dev->core_if->core_global_regs->ggpio),
++			     "GGPIO");
++DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid),
++			     "GUID");
++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,
++			     &(otg_dev->core_if->core_global_regs->gsnpsid),
++			     "GSNPSID");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed");
++
++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,
++			     &(otg_dev->core_if->core_global_regs->hptxfsiz),
++			     "HPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0");
++
++/**
++ * @todo Add code to initiate the HNP.
++ */
++/**
++ * Show the HNP status bit
++ */
++static ssize_t hnp_show(struct device *_dev,
++			struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "HstNegScs = 0x%x\n",
++		       dwc_otg_get_hnpstatus(otg_dev->core_if));
++}
++
++/**
++ * Set the HNP Request bit
++ */
++static ssize_t hnp_store(struct device *_dev,
++			 struct device_attribute *attr,
++			 const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_hnpreq(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
++
++/**
++ * @todo Add code to initiate the SRP.
++ */
++/**
++ * Show the SRP status bit
++ */
++static ssize_t srp_show(struct device *_dev,
++			struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "SesReqScs = 0x%x\n",
++		       dwc_otg_get_srpstatus(otg_dev->core_if));
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++/**
++ * Set the SRP Request bit
++ */
++static ssize_t srp_store(struct device *_dev,
++			 struct device_attribute *attr,
++			 const char *buf, size_t count)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_pcd_initiate_srp(otg_dev->pcd);
++#endif
++	return count;
++}
++
++DEVICE_ATTR(srp, 0644, srp_show, srp_store);
++
++/**
++ * @todo Need to do more for power on/off?
++ */
++/**
++ * Show the Bus Power status
++ */
++static ssize_t buspower_show(struct device *_dev,
++			     struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Bus Power = 0x%x\n",
++		       dwc_otg_get_prtpower(otg_dev->core_if));
++}
++
++/**
++ * Set the Bus Power status
++ */
++static ssize_t buspower_store(struct device *_dev,
++			      struct device_attribute *attr,
++			      const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t on = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_prtpower(otg_dev->core_if, on);
++	return count;
++}
++
++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
++
++/**
++ * @todo Need to do more for suspend?
++ */
++/**
++ * Show the Bus Suspend status
++ */
++static ssize_t bussuspend_show(struct device *_dev,
++			       struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Bus Suspend = 0x%x\n",
++		       dwc_otg_get_prtsuspend(otg_dev->core_if));
++}
++
++/**
++ * Set the Bus Suspend status
++ */
++static ssize_t bussuspend_store(struct device *_dev,
++				struct device_attribute *attr,
++				const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_prtsuspend(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
++
++/**
++ * Show the Mode Change Ready Timer status
++ */
++static ssize_t mode_ch_tim_en_show(struct device *_dev,
++				   struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n",
++		       dwc_otg_get_mode_ch_tim(otg_dev->core_if));
++}
++
++/**
++ * Set the Mode Change Ready Timer status
++ */
++static ssize_t mode_ch_tim_en_store(struct device *_dev,
++				    struct device_attribute *attr,
++				    const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_mode_ch_tim(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store);
++
++/**
++ * Show the value of HFIR Frame Interval bitfield
++ */
++static ssize_t fr_interval_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Frame Interval = 0x%x\n",
++		       dwc_otg_get_fr_interval(otg_dev->core_if));
++}
++
++/**
++ * Set the HFIR Frame Interval value
++ */
++static ssize_t fr_interval_store(struct device *_dev,
++				 struct device_attribute *attr,
++				 const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 10);
++	dwc_otg_set_fr_interval(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store);
++
++/**
++ * Show the status of Remote Wakeup.
++ */
++static ssize_t remote_wakeup_show(struct device *_dev,
++				  struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	return sprintf(buf,
++		       "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n",
++		       dwc_otg_get_remotewakesig(otg_dev->core_if),
++		       dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd),
++		       dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if));
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif /* DWC_HOST_ONLY */
++}
++
++/**
++ * Initiate a remote wakeup of the host.  The Device control register
++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
++ * flag is set.
++ *
++ */
++static ssize_t remote_wakeup_store(struct device *_dev,
++				   struct device_attribute *attr,
++				   const char *buf, size_t count)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++
++	if (val & 1) {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
++	} else {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
++	}
++#endif /* DWC_HOST_ONLY */
++	return count;
++}
++
++DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show,
++	    remote_wakeup_store);
++
++/**
++ * Show the whether core is hibernated or not. 					
++ */
++static ssize_t rem_wakeup_pwrdn_show(struct device *_dev,
++				     struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	if (dwc_otg_get_core_state(otg_dev->core_if)) {
++		DWC_PRINTF("Core is in hibernation\n");
++	} else {
++		DWC_PRINTF("Core is not in hibernation\n");
++	}
++#endif /* DWC_HOST_ONLY */
++	return 0;
++}
++
++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
++					      int rem_wakeup, int reset);
++
++/**
++ * Initiate a remote wakeup of the device to exit from hibernation.
++ */
++static ssize_t rem_wakeup_pwrdn_store(struct device *_dev,
++				      struct device_attribute *attr,
++				      const char *buf, size_t count)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0);
++#endif
++	return count;
++}
++
++DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show,
++	    rem_wakeup_pwrdn_store);
++
++static ssize_t disconnect_us(struct device *_dev,
++			     struct device_attribute *attr,
++			     const char *buf, size_t count)
++{
++
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	DWC_PRINTF("The Passed value is %04x\n", val);
++
++	dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50);
++
++#endif /* DWC_HOST_ONLY */
++	return count;
++}
++
++DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t regdump_show(struct device *_dev,
++			    struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	dwc_otg_dump_global_registers(otg_dev->core_if);
++	if (dwc_otg_is_host_mode(otg_dev->core_if)) {
++		dwc_otg_dump_host_registers(otg_dev->core_if);
++	} else {
++		dwc_otg_dump_dev_registers(otg_dev->core_if);
++
++	}
++	return sprintf(buf, "Register Dump\n");
++}
++
++DEVICE_ATTR(regdump, S_IRUGO, regdump_show, 0);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t spramdump_show(struct device *_dev,
++			      struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	dwc_otg_dump_spram(otg_dev->core_if);
++
++	return sprintf(buf, "SPRAM Dump\n");
++}
++
++DEVICE_ATTR(spramdump, S_IRUGO, spramdump_show, 0);
++
++/**
++ * Dump the current hcd state.
++ */
++static ssize_t hcddump_show(struct device *_dev,
++			    struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_hcd_dump_state(otg_dev->hcd);
++#endif /* DWC_DEVICE_ONLY */
++	return sprintf(buf, "HCD Dump\n");
++}
++
++DEVICE_ATTR(hcddump, S_IRUGO, hcddump_show, 0);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ */
++static ssize_t hcd_frrem_show(struct device *_dev,
++			      struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	dwc_otg_hcd_dump_frrem(otg_dev->hcd);
++#endif /* DWC_DEVICE_ONLY */
++	return sprintf(buf, "HCD Dump Frame Remaining\n");
++}
++
++DEVICE_ATTR(hcd_frrem, S_IRUGO, hcd_frrem_show, 0);
++
++/**
++ * Displays the time required to read the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is read).
++ */
++#define RW_REG_COUNT 10000000
++#define MSEC_PER_JIFFIE 1000/HZ
++static ssize_t rd_reg_test_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_otg_get_gnptxfsiz(otg_dev->core_if);
++	}
++	time = jiffies - start_jiffies;
++	return sprintf(buf,
++		       "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++		       RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(rd_reg_test, S_IRUGO, rd_reg_test_show, 0);
++
++/**
++ * Displays the time required to write the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is written).
++ */
++static ssize_t wr_reg_test_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t reg_val;
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val);
++	}
++	time = jiffies - start_jiffies;
++	return sprintf(buf,
++		       "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++		       RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(wr_reg_test, S_IRUGO, wr_reg_test_show, 0);
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++
++/**
++* Show the lpm_response attribute.
++*/
++static ssize_t lpmresp_show(struct device *_dev,
++			    struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if))
++		return sprintf(buf, "** LPM is DISABLED **\n");
++
++	if (!dwc_otg_is_device_mode(otg_dev->core_if)) {
++		return sprintf(buf, "** Current mode is not device mode\n");
++	}
++	return sprintf(buf, "lpm_response = %d\n",
++		       dwc_otg_get_lpmresponse(otg_dev->core_if));
++}
++
++/**
++* Store the lpm_response attribute.
++*/
++static ssize_t lpmresp_store(struct device *_dev,
++			     struct device_attribute *attr,
++			     const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++
++	if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) {
++		return 0;
++	}
++
++	if (!dwc_otg_is_device_mode(otg_dev->core_if)) {
++		return 0;
++	}
++
++	dwc_otg_set_lpmresponse(otg_dev->core_if, val);
++	return count;
++}
++
++DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store);
++
++/**
++* Show the sleep_status attribute.
++*/
++static ssize_t sleepstatus_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Sleep Status = %d\n",
++		       dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if));
++}
++
++/**
++ * Store the sleep_status attribure.
++ */
++static ssize_t sleepstatus_store(struct device *_dev,
++				 struct device_attribute *attr,
++				 const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++
++	if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) {
++		if (dwc_otg_is_host_mode(core_if)) {
++
++			DWC_PRINTF("Host initiated resume\n");
++			dwc_otg_set_prtresume(otg_dev->core_if, 1);
++		}
++	}
++
++	return count;
++}
++
++DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show,
++	    sleepstatus_store);
++
++#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */
++
++/**@}*/
++
++/**
++ * Create the device files
++ */
++void dwc_otg_attr_create(
++#ifdef LM_INTERFACE
++	struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++	struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++        struct platform_device *dev
++#endif
++    )
++{
++	int error;
++
++	error = device_create_file(&dev->dev, &dev_attr_regoffset);
++	error = device_create_file(&dev->dev, &dev_attr_regvalue);
++	error = device_create_file(&dev->dev, &dev_attr_mode);
++	error = device_create_file(&dev->dev, &dev_attr_hnpcapable);
++	error = device_create_file(&dev->dev, &dev_attr_srpcapable);
++	error = device_create_file(&dev->dev, &dev_attr_hsic_connect);
++	error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic);
++	error = device_create_file(&dev->dev, &dev_attr_hnp);
++	error = device_create_file(&dev->dev, &dev_attr_srp);
++	error = device_create_file(&dev->dev, &dev_attr_buspower);
++	error = device_create_file(&dev->dev, &dev_attr_bussuspend);
++	error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en);
++	error = device_create_file(&dev->dev, &dev_attr_fr_interval);
++	error = device_create_file(&dev->dev, &dev_attr_busconnected);
++	error = device_create_file(&dev->dev, &dev_attr_gotgctl);
++	error = device_create_file(&dev->dev, &dev_attr_gusbcfg);
++	error = device_create_file(&dev->dev, &dev_attr_grxfsiz);
++	error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz);
++	error = device_create_file(&dev->dev, &dev_attr_gpvndctl);
++	error = device_create_file(&dev->dev, &dev_attr_ggpio);
++	error = device_create_file(&dev->dev, &dev_attr_guid);
++	error = device_create_file(&dev->dev, &dev_attr_gsnpsid);
++	error = device_create_file(&dev->dev, &dev_attr_devspeed);
++	error = device_create_file(&dev->dev, &dev_attr_enumspeed);
++	error = device_create_file(&dev->dev, &dev_attr_hptxfsiz);
++	error = device_create_file(&dev->dev, &dev_attr_hprt0);
++	error = device_create_file(&dev->dev, &dev_attr_remote_wakeup);
++	error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn);
++	error = device_create_file(&dev->dev, &dev_attr_disconnect_us);
++	error = device_create_file(&dev->dev, &dev_attr_regdump);
++	error = device_create_file(&dev->dev, &dev_attr_spramdump);
++	error = device_create_file(&dev->dev, &dev_attr_hcddump);
++	error = device_create_file(&dev->dev, &dev_attr_hcd_frrem);
++	error = device_create_file(&dev->dev, &dev_attr_rd_reg_test);
++	error = device_create_file(&dev->dev, &dev_attr_wr_reg_test);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	error = device_create_file(&dev->dev, &dev_attr_lpm_response);
++	error = device_create_file(&dev->dev, &dev_attr_sleep_status);
++#endif
++}
++
++/**
++ * Remove the device files
++ */
++void dwc_otg_attr_remove(
++#ifdef LM_INTERFACE
++	struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++	struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    )
++{
++	device_remove_file(&dev->dev, &dev_attr_regoffset);
++	device_remove_file(&dev->dev, &dev_attr_regvalue);
++	device_remove_file(&dev->dev, &dev_attr_mode);
++	device_remove_file(&dev->dev, &dev_attr_hnpcapable);
++	device_remove_file(&dev->dev, &dev_attr_srpcapable);
++	device_remove_file(&dev->dev, &dev_attr_hsic_connect);
++	device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic);
++	device_remove_file(&dev->dev, &dev_attr_hnp);
++	device_remove_file(&dev->dev, &dev_attr_srp);
++	device_remove_file(&dev->dev, &dev_attr_buspower);
++	device_remove_file(&dev->dev, &dev_attr_bussuspend);
++	device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en);
++	device_remove_file(&dev->dev, &dev_attr_fr_interval);
++	device_remove_file(&dev->dev, &dev_attr_busconnected);
++	device_remove_file(&dev->dev, &dev_attr_gotgctl);
++	device_remove_file(&dev->dev, &dev_attr_gusbcfg);
++	device_remove_file(&dev->dev, &dev_attr_grxfsiz);
++	device_remove_file(&dev->dev, &dev_attr_gnptxfsiz);
++	device_remove_file(&dev->dev, &dev_attr_gpvndctl);
++	device_remove_file(&dev->dev, &dev_attr_ggpio);
++	device_remove_file(&dev->dev, &dev_attr_guid);
++	device_remove_file(&dev->dev, &dev_attr_gsnpsid);
++	device_remove_file(&dev->dev, &dev_attr_devspeed);
++	device_remove_file(&dev->dev, &dev_attr_enumspeed);
++	device_remove_file(&dev->dev, &dev_attr_hptxfsiz);
++	device_remove_file(&dev->dev, &dev_attr_hprt0);
++	device_remove_file(&dev->dev, &dev_attr_remote_wakeup);
++	device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn);
++	device_remove_file(&dev->dev, &dev_attr_disconnect_us);
++	device_remove_file(&dev->dev, &dev_attr_regdump);
++	device_remove_file(&dev->dev, &dev_attr_spramdump);
++	device_remove_file(&dev->dev, &dev_attr_hcddump);
++	device_remove_file(&dev->dev, &dev_attr_hcd_frrem);
++	device_remove_file(&dev->dev, &dev_attr_rd_reg_test);
++	device_remove_file(&dev->dev, &dev_attr_wr_reg_test);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	device_remove_file(&dev->dev, &dev_attr_lpm_response);
++	device_remove_file(&dev->dev, &dev_attr_sleep_status);
++#endif
++}
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_attr.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_attr.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_attr.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_attr.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,89 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
++ * $Revision: #13 $
++ * $Date: 2010/06/21 $
++ * $Change: 1532021 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_ATTR_H__)
++#define __DWC_OTG_ATTR_H__
++
++/** @file
++ * This file contains the interface to the Linux device attributes.
++ */
++extern struct device_attribute dev_attr_regoffset;
++extern struct device_attribute dev_attr_regvalue;
++
++extern struct device_attribute dev_attr_mode;
++extern struct device_attribute dev_attr_hnpcapable;
++extern struct device_attribute dev_attr_srpcapable;
++extern struct device_attribute dev_attr_hnp;
++extern struct device_attribute dev_attr_srp;
++extern struct device_attribute dev_attr_buspower;
++extern struct device_attribute dev_attr_bussuspend;
++extern struct device_attribute dev_attr_mode_ch_tim_en;
++extern struct device_attribute dev_attr_fr_interval;
++extern struct device_attribute dev_attr_busconnected;
++extern struct device_attribute dev_attr_gotgctl;
++extern struct device_attribute dev_attr_gusbcfg;
++extern struct device_attribute dev_attr_grxfsiz;
++extern struct device_attribute dev_attr_gnptxfsiz;
++extern struct device_attribute dev_attr_gpvndctl;
++extern struct device_attribute dev_attr_ggpio;
++extern struct device_attribute dev_attr_guid;
++extern struct device_attribute dev_attr_gsnpsid;
++extern struct device_attribute dev_attr_devspeed;
++extern struct device_attribute dev_attr_enumspeed;
++extern struct device_attribute dev_attr_hptxfsiz;
++extern struct device_attribute dev_attr_hprt0;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++extern struct device_attribute dev_attr_lpm_response;
++extern struct device_attribute devi_attr_sleep_status;
++#endif
++
++void dwc_otg_attr_create(
++#ifdef LM_INTERFACE
++				struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++				struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++
++void dwc_otg_attr_remove(
++#ifdef LM_INTERFACE
++				struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++				struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++#endif
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cfi.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cfi.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cfi.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cfi.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1876 @@
++/* ==========================================================================
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file 
++ *
++ * This file contains the most of the CFI(Core Feature Interface) 
++ * implementation for the OTG. 
++ */
++
++#ifdef DWC_UTE_CFI
++
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_cfi.h"
++
++/** This definition should actually migrate to the Portability Library */
++#define DWC_CONSTANT_CPU_TO_LE16(x) (x)
++
++extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex);
++
++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen);
++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen,
++				 struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *ctrl_req);
++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd);
++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req);
++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *req);
++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				struct cfi_usb_ctrlrequest *req);
++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req);
++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep);
++
++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if);
++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue);
++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue);
++
++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if);
++
++/** This is the header of the all features descriptor */
++static cfi_all_features_header_t all_props_desc_header = {
++	.wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100),
++	.wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG),
++	.wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9),
++};
++
++/** This is an array of statically allocated feature descriptors */
++static cfi_feature_desc_header_t prop_descs[] = {
++
++	/* FT_ID_DMA_MODE */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1),
++	 },
++
++	/* FT_ID_DMA_BUFFER_SETUP */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_DMA_BUFF_ALIGN */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 },
++
++	/* FT_ID_DMA_CONCAT_SETUP */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 //.wDataLength  = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_DMA_CIRCULAR */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_THRESHOLD_SETUP */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_DFIFO_DEPTH */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH),
++	 .bmAttributes = CFI_FEATURE_ATTR_RO,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 },
++
++	/* FT_ID_TX_FIFO_DEPTH */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 },
++
++	/* FT_ID_RX_FIFO_DEPTH */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 }
++};
++
++/** The table of feature names */
++cfi_string_t prop_name_table[] = {
++	{FT_ID_DMA_MODE, "dma_mode"},
++	{FT_ID_DMA_BUFFER_SETUP, "buffer_setup"},
++	{FT_ID_DMA_BUFF_ALIGN, "buffer_align"},
++	{FT_ID_DMA_CONCAT_SETUP, "concat_setup"},
++	{FT_ID_DMA_CIRCULAR, "buffer_circular"},
++	{FT_ID_THRESHOLD_SETUP, "threshold_setup"},
++	{FT_ID_DFIFO_DEPTH, "dfifo_depth"},
++	{FT_ID_TX_FIFO_DEPTH, "txfifo_depth"},
++	{FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"},
++	{}
++};
++
++/************************************************************************/
++
++/** 
++ * Returns the name of the feature by its ID 
++ * or NULL if no featute ID matches.
++ * 
++ */
++const uint8_t *get_prop_name(uint16_t prop_id, int *len)
++{
++	cfi_string_t *pstr;
++	*len = 0;
++
++	for (pstr = prop_name_table; pstr && pstr->s; pstr++) {
++		if (pstr->id == prop_id) {
++			*len = DWC_STRLEN(pstr->s);
++			return pstr->s;
++		}
++	}
++	return NULL;
++}
++
++/**
++ * This function handles all CFI specific control requests.
++ * 
++ * Return a negative value to stall the DCE.
++ */
++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl)
++{
++	int retval = 0;
++	dwc_otg_pcd_ep_t *ep = NULL;
++	cfiobject_t *cfi = pcd->cfi;
++	struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd);
++	uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength);
++	uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue);
++	uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex);
++	uint32_t regaddr = 0;
++	uint32_t regval = 0;
++
++	/* Save this Control Request in the CFI object. 
++	 * The data field will be assigned in the data stage completion CB function.
++	 */
++	cfi->ctrl_req = *ctrl;
++	cfi->ctrl_req.data = NULL;
++
++	cfi->need_gadget_att = 0;
++	cfi->need_status_in_complete = 0;
++
++	switch (ctrl->bRequest) {
++	case VEN_CORE_GET_FEATURES:
++		retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN);
++		if (retval >= 0) {
++			//dump_msg(cfi->buf_in.buf, retval);
++			ep = &pcd->ep0;
++
++			retval = min((uint16_t) retval, wLen);
++			/* Transfer this buffer to the host through the EP0-IN EP */
++			ep->dwc_ep.dma_addr = cfi->buf_in.addr;
++			ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_len = retval;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			pcd->ep0_pending = 1;
++			dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		}
++		retval = 0;
++		break;
++
++	case VEN_CORE_GET_FEATURE:
++		CFI_INFO("VEN_CORE_GET_FEATURE\n");
++		retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN,
++					       pcd, ctrl);
++		if (retval >= 0) {
++			ep = &pcd->ep0;
++
++			retval = min((uint16_t) retval, wLen);
++			/* Transfer this buffer to the host through the EP0-IN EP */
++			ep->dwc_ep.dma_addr = cfi->buf_in.addr;
++			ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_len = retval;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			pcd->ep0_pending = 1;
++			dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		}
++		CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval);
++		dump_msg(cfi->buf_in.buf, retval);
++		break;
++
++	case VEN_CORE_SET_FEATURE:
++		CFI_INFO("VEN_CORE_SET_FEATURE\n");
++		/* Set up an XFER to get the data stage of the control request,
++		 * which is the new value of the feature to be modified.
++		 */
++		ep = &pcd->ep0;
++		ep->dwc_ep.is_in = 0;
++		ep->dwc_ep.dma_addr = cfi->buf_out.addr;
++		ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_len = wLen;
++		ep->dwc_ep.xfer_count = 0;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++		pcd->ep0_pending = 1;
++		/* Read the control write's data stage */
++		dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		retval = 0;
++		break;
++
++	case VEN_CORE_RESET_FEATURES:
++		CFI_INFO("VEN_CORE_RESET_FEATURES\n");
++		cfi->need_gadget_att = 1;
++		cfi->need_status_in_complete = 1;
++		retval = cfi_preproc_reset(pcd, ctrl);
++		CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval);
++		break;
++
++	case VEN_CORE_ACTIVATE_FEATURES:
++		CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n");
++		break;
++
++	case VEN_CORE_READ_REGISTER:
++		CFI_INFO("VEN_CORE_READ_REGISTER\n");
++		/* wValue optionally contains the HI WORD of the register offset and
++		 * wIndex contains the LOW WORD of the register offset 
++		 */
++		if (wValue == 0) {
++			/* @TODO - MAS - fix the access to the base field */
++			regaddr = 0;
++			//regaddr = (uint32_t) pcd->otg_dev->os_dep.base;
++			//GET_CORE_IF(pcd)->co
++			regaddr |= wIndex;
++		} else {
++			regaddr = (wValue << 16) | wIndex;
++		}
++
++		/* Read a 32-bit value of the memory at the regaddr */
++		regval = DWC_READ_REG32((uint32_t *) regaddr);
++
++		ep = &pcd->ep0;
++		dwc_memcpy(cfi->buf_in.buf, &regval, sizeof(uint32_t));
++		ep->dwc_ep.is_in = 1;
++		ep->dwc_ep.dma_addr = cfi->buf_in.addr;
++		ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
++		ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
++		ep->dwc_ep.xfer_len = wLen;
++		ep->dwc_ep.xfer_count = 0;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++		pcd->ep0_pending = 1;
++		dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		cfi->need_gadget_att = 0;
++		retval = 0;
++		break;
++
++	case VEN_CORE_WRITE_REGISTER:
++		CFI_INFO("VEN_CORE_WRITE_REGISTER\n");
++		/* Set up an XFER to get the data stage of the control request,
++		 * which is the new value of the register to be modified.
++		 */
++		ep = &pcd->ep0;
++		ep->dwc_ep.is_in = 0;
++		ep->dwc_ep.dma_addr = cfi->buf_out.addr;
++		ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_len = wLen;
++		ep->dwc_ep.xfer_count = 0;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++		pcd->ep0_pending = 1;
++		/* Read the control write's data stage */
++		dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		retval = 0;
++		break;
++
++	default:
++		retval = -DWC_E_NOT_SUPPORTED;
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * This function prepares the core features descriptors and copies its
++ * raw representation into the buffer <buf>.
++ * 
++ * The buffer structure is as follows:
++ *	all_features_header (8 bytes)
++ *	features_#1 (8 bytes + feature name string length)
++ *	features_#2 (8 bytes + feature name string length)
++ *	.....
++ *	features_#n - where n=the total count of feature descriptors
++ */
++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen)
++{
++	cfi_feature_desc_header_t *prop_hdr = prop_descs;
++	cfi_feature_desc_header_t *prop;
++	cfi_all_features_header_t *all_props_hdr = &all_props_desc_header;
++	cfi_all_features_header_t *tmp;
++	uint8_t *tmpbuf = buf;
++	const uint8_t *pname = NULL;
++	int i, j, namelen = 0, totlen;
++
++	/* Prepare and copy the core features into the buffer */
++	CFI_INFO("%s:\n", __func__);
++
++	tmp = (cfi_all_features_header_t *) tmpbuf;
++	*tmp = *all_props_hdr;
++	tmpbuf += CFI_ALL_FEATURES_HDR_LEN;
++
++	j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t);
++	for (i = 0; i < j; i++, prop_hdr++) {
++		pname = get_prop_name(prop_hdr->wFeatureID, &namelen);
++		prop = (cfi_feature_desc_header_t *) tmpbuf;
++		*prop = *prop_hdr;
++
++		prop->bNameLen = namelen;
++		prop->wLength =
++		    DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN +
++					     namelen);
++
++		tmpbuf += CFI_FEATURE_DESC_HDR_LEN;
++		dwc_memcpy(tmpbuf, pname, namelen);
++		tmpbuf += namelen;
++	}
++
++	totlen = tmpbuf - buf;
++
++	if (totlen > 0) {
++		tmp = (cfi_all_features_header_t *) buf;
++		tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen);
++	}
++
++	return totlen;
++}
++
++/**
++ * This function releases all the dynamic memory in the CFI object.
++ */
++static void cfi_release(cfiobject_t * cfiobj)
++{
++	cfi_ep_t *cfiep;
++	dwc_list_link_t *tmp;
++
++	CFI_INFO("%s\n", __func__);
++
++	if (cfiobj->buf_in.buf) {
++		DWC_DMA_FREE(CFI_IN_BUF_LEN, cfiobj->buf_in.buf,
++			     cfiobj->buf_in.addr);
++		cfiobj->buf_in.buf = NULL;
++	}
++
++	if (cfiobj->buf_out.buf) {
++		DWC_DMA_FREE(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf,
++			     cfiobj->buf_out.addr);
++		cfiobj->buf_out.buf = NULL;
++	}
++
++	/* Free the Buffer Setup values for each EP */
++	//list_for_each_entry(cfiep, &cfiobj->active_eps, lh) {
++	DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) {
++		cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++		cfi_free_ep_bs_dyn_data(cfiep);
++	}
++}
++
++/**
++ * This function frees the dynamically allocated EP buffer setup data.
++ */
++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep)
++{
++	if (cfiep->bm_sg) {
++		DWC_FREE(cfiep->bm_sg);
++		cfiep->bm_sg = NULL;
++	}
++
++	if (cfiep->bm_align) {
++		DWC_FREE(cfiep->bm_align);
++		cfiep->bm_align = NULL;
++	}
++
++	if (cfiep->bm_concat) {
++		if (NULL != cfiep->bm_concat->wTxBytes) {
++			DWC_FREE(cfiep->bm_concat->wTxBytes);
++			cfiep->bm_concat->wTxBytes = NULL;
++		}
++		DWC_FREE(cfiep->bm_concat);
++		cfiep->bm_concat = NULL;
++	}
++}
++
++/**
++ * This function initializes the default values of the features
++ * for a specific endpoint and should be called only once when
++ * the EP is enabled first time.
++ */
++static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep)
++{
++	int retval = 0;
++
++	cfiep->bm_sg = DWC_ALLOC(sizeof(ddma_sg_buffer_setup_t));
++	if (NULL == cfiep->bm_sg) {
++		CFI_INFO("Failed to allocate memory for SG feature value\n");
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
++
++	/* For the Concatenation feature's default value we do not allocate
++	 * memory for the wTxBytes field - it will be done in the set_feature_value
++	 * request handler.
++	 */
++	cfiep->bm_concat = DWC_ALLOC(sizeof(ddma_concat_buffer_setup_t));
++	if (NULL == cfiep->bm_concat) {
++		CFI_INFO
++		    ("Failed to allocate memory for CONCATENATION feature value\n");
++		DWC_FREE(cfiep->bm_sg);
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t));
++
++	cfiep->bm_align = DWC_ALLOC(sizeof(ddma_align_buffer_setup_t));
++	if (NULL == cfiep->bm_align) {
++		CFI_INFO
++		    ("Failed to allocate memory for Alignment feature value\n");
++		DWC_FREE(cfiep->bm_sg);
++		DWC_FREE(cfiep->bm_concat);
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t));
++
++	return retval;
++}
++
++/**
++ * The callback function that notifies the CFI on the activation of
++ * an endpoint in the PCD. The following steps are done in this function:
++ *
++ *	Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's 
++ *		active endpoint)
++ *	Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP
++ *	Set the Buffer Mode to standard
++ *	Initialize the default values for all EP modes (SG, Circular, Concat, Align)
++ *	Add the cfi_ep_t object to the list of active endpoints in the CFI object
++ */
++static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd,
++			 struct dwc_otg_pcd_ep *ep)
++{
++	cfi_ep_t *cfiep;
++	int retval = -DWC_E_NOT_SUPPORTED;
++
++	CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__,
++		 "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress);
++	/* MAS - Check whether this endpoint already is in the list */
++	cfiep = get_cfi_ep_by_pcd_ep(cfi, ep);
++
++	if (NULL == cfiep) {
++		/* Allocate a cfi_ep_t object */
++		cfiep = DWC_ALLOC(sizeof(cfi_ep_t));
++		if (NULL == cfiep) {
++			CFI_INFO
++			    ("Unable to allocate memory for <cfiep> in function %s\n",
++			     __func__);
++			return -DWC_E_NO_MEMORY;
++		}
++		dwc_memset(cfiep, 0, sizeof(cfi_ep_t));
++
++		/* Save the dwc_otg_pcd_ep pointer in the cfiep object */
++		cfiep->ep = ep;
++
++		/* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */
++		ep->dwc_ep.descs =
++		    DWC_DMA_ALLOC(MAX_DMA_DESCS_PER_EP *
++				  sizeof(dwc_otg_dma_desc_t),
++				  &ep->dwc_ep.descs_dma_addr);
++
++		if (NULL == ep->dwc_ep.descs) {
++			DWC_FREE(cfiep);
++			return -DWC_E_NO_MEMORY;
++		}
++
++		DWC_LIST_INIT(&cfiep->lh);
++
++		/* Set the buffer mode to BM_STANDARD. It will be modified 
++		 * when building descriptors for a specific buffer mode */
++		ep->dwc_ep.buff_mode = BM_STANDARD;
++
++		/* Create and initialize the default values for this EP's Buffer modes */
++		if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0)
++			return retval;
++
++		/* Add the cfi_ep_t object to the CFI object's list of active endpoints */
++		DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh);
++		retval = 0;
++	} else {		/* The sought EP already is in the list */
++		CFI_INFO("%s: The sought EP already is in the list\n",
++			 __func__);
++	}
++
++	return retval;
++}
++
++/**
++ * This function is called when the data stage of a 3-stage Control Write request
++ * is complete.
++ * 
++ */
++static int cfi_ctrl_write_complete(struct cfiobject *cfi,
++				   struct dwc_otg_pcd *pcd)
++{
++	uint32_t addr, reg_value;
++	uint16_t wIndex, wValue;
++	uint8_t bRequest;
++	uint8_t *buf = cfi->buf_out.buf;
++	//struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved;
++	struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req;
++	int retval = -DWC_E_NOT_SUPPORTED;
++
++	CFI_INFO("%s\n", __func__);
++
++	bRequest = ctrl_req->bRequest;
++	wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex);
++	wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue);
++
++	/* 
++	 * Save the pointer to the data stage in the ctrl_req's <data> field.
++	 * The request should be already saved in the command stage by now.
++	 */
++	ctrl_req->data = cfi->buf_out.buf;
++	cfi->need_status_in_complete = 0;
++	cfi->need_gadget_att = 0;
++
++	switch (bRequest) {
++	case VEN_CORE_WRITE_REGISTER:
++		/* The buffer contains raw data of the new value for the register */
++		reg_value = *((uint32_t *) buf);
++		if (wValue == 0) {
++			addr = 0;
++			//addr = (uint32_t) pcd->otg_dev->os_dep.base;
++			addr += wIndex;
++		} else {
++			addr = (wValue << 16) | wIndex;
++		}
++
++		//writel(reg_value, addr);
++
++		retval = 0;
++		cfi->need_status_in_complete = 1;
++		break;
++
++	case VEN_CORE_SET_FEATURE:
++		/* The buffer contains raw data of the new value of the feature */
++		retval = cfi_set_feature_value(pcd);
++		if (retval < 0)
++			return retval;
++
++		cfi->need_status_in_complete = 1;
++		break;
++
++	default:
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * This function builds the DMA descriptors for the SG buffer mode.
++ */
++static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++			       dwc_otg_pcd_request_t * req)
++{
++	struct dwc_otg_pcd_ep *ep = cfiep->ep;
++	ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg;
++	struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
++	struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs;
++	dma_addr_t buff_addr = req->dma;
++	int i;
++	uint32_t txsize, off;
++
++	txsize = sgval->wSize;
++	off = sgval->bOffset;
++
++//      CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n", 
++//              __func__, cfiep->ep->ep.name, txsize, off);
++
++	for (i = 0; i < sgval->bCount; i++) {
++		desc->status.b.bs = BS_HOST_BUSY;
++		desc->buf = buff_addr;
++		desc->status.b.l = 0;
++		desc->status.b.ioc = 0;
++		desc->status.b.sp = 0;
++		desc->status.b.bytes = txsize;
++		desc->status.b.bs = BS_HOST_READY;
++
++		/* Set the next address of the buffer */
++		buff_addr += txsize + off;
++		desc_last = desc;
++		desc++;
++	}
++
++	/* Set the last, ioc and sp bits on the Last DMA Descriptor */
++	desc_last->status.b.l = 1;
++	desc_last->status.b.ioc = 1;
++	desc_last->status.b.sp = ep->dwc_ep.sent_zlp;
++	/* Save the last DMA descriptor pointer */
++	cfiep->dma_desc_last = desc_last;
++	cfiep->desc_count = sgval->bCount;
++}
++
++/**
++ * This function builds the DMA descriptors for the Concatenation buffer mode.
++ */
++static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++				   dwc_otg_pcd_request_t * req)
++{
++	struct dwc_otg_pcd_ep *ep = cfiep->ep;
++	ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat;
++	struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
++	struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs;
++	dma_addr_t buff_addr = req->dma;
++	int i;
++	uint16_t *txsize;
++
++	txsize = concatval->wTxBytes;
++
++	for (i = 0; i < concatval->hdr.bDescCount; i++) {
++		desc->buf = buff_addr;
++		desc->status.b.bs = BS_HOST_BUSY;
++		desc->status.b.l = 0;
++		desc->status.b.ioc = 0;
++		desc->status.b.sp = 0;
++		desc->status.b.bytes = *txsize;
++		desc->status.b.bs = BS_HOST_READY;
++
++		txsize++;
++		/* Set the next address of the buffer */
++		buff_addr += UGETW(ep->desc->wMaxPacketSize);
++		desc_last = desc;
++		desc++;
++	}
++
++	/* Set the last, ioc and sp bits on the Last DMA Descriptor */
++	desc_last->status.b.l = 1;
++	desc_last->status.b.ioc = 1;
++	desc_last->status.b.sp = ep->dwc_ep.sent_zlp;
++	cfiep->dma_desc_last = desc_last;
++	cfiep->desc_count = concatval->hdr.bDescCount;
++}
++
++/**
++ * This function builds the DMA descriptors for the Circular buffer mode
++ */
++static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++				 dwc_otg_pcd_request_t * req)
++{
++	/* @todo: MAS - add implementation when this feature needs to be tested */
++}
++
++/**
++ * This function builds the DMA descriptors for the Alignment buffer mode
++ */
++static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++				  dwc_otg_pcd_request_t * req)
++{
++	struct dwc_otg_pcd_ep *ep = cfiep->ep;
++	ddma_align_buffer_setup_t *alignval = cfiep->bm_align;
++	struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
++	dma_addr_t buff_addr = req->dma;
++
++	desc->status.b.bs = BS_HOST_BUSY;
++	desc->status.b.l = 1;
++	desc->status.b.ioc = 1;
++	desc->status.b.sp = ep->dwc_ep.sent_zlp;
++	desc->status.b.bytes = req->length;
++	/* Adjust the buffer alignment */
++	desc->buf = (buff_addr + alignval->bAlign);
++	desc->status.b.bs = BS_HOST_READY;
++	cfiep->dma_desc_last = desc;
++	cfiep->desc_count = 1;
++}
++
++/**
++ * This function builds the DMA descriptors chain for different modes of the
++ * buffer setup of an endpoint.
++ */
++static void cfi_build_descriptors(struct cfiobject *cfi,
++				  struct dwc_otg_pcd *pcd,
++				  struct dwc_otg_pcd_ep *ep,
++				  dwc_otg_pcd_request_t * req)
++{
++	cfi_ep_t *cfiep;
++
++	/* Get the cfiep by the dwc_otg_pcd_ep */
++	cfiep = get_cfi_ep_by_pcd_ep(cfi, ep);
++	if (NULL == cfiep) {
++		CFI_INFO("%s: Unable to find a matching active endpoint\n",
++			 __func__);
++		return;
++	}
++
++	cfiep->xfer_len = req->length;
++
++	/* Iterate through all the DMA descriptors */
++	switch (cfiep->ep->dwc_ep.buff_mode) {
++	case BM_SG:
++		cfi_build_sg_descs(cfi, cfiep, req);
++		break;
++
++	case BM_CONCAT:
++		cfi_build_concat_descs(cfi, cfiep, req);
++		break;
++
++	case BM_CIRCULAR:
++		cfi_build_circ_descs(cfi, cfiep, req);
++		break;
++
++	case BM_ALIGN:
++		cfi_build_align_descs(cfi, cfiep, req);
++		break;
++
++	default:
++		break;
++	}
++}
++
++/**
++ * Allocate DMA buffer for different Buffer modes.
++ */
++static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd,
++			      struct dwc_otg_pcd_ep *ep, dma_addr_t * dma,
++			      unsigned size, gfp_t flags)
++{
++	return DWC_DMA_ALLOC(size, dma);
++}
++
++/**
++ * This function initializes the CFI object.
++ */
++int init_cfi(cfiobject_t * cfiobj)
++{
++	CFI_INFO("%s\n", __func__);
++
++	/* Allocate a buffer for IN XFERs */
++	cfiobj->buf_in.buf =
++	    DWC_DMA_ALLOC(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr);
++	if (NULL == cfiobj->buf_in.buf) {
++		CFI_INFO("Unable to allocate buffer for INs\n");
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Allocate a buffer for OUT XFERs */
++	cfiobj->buf_out.buf =
++	    DWC_DMA_ALLOC(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr);
++	if (NULL == cfiobj->buf_out.buf) {
++		CFI_INFO("Unable to allocate buffer for OUT\n");
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Initialize the callback function pointers */
++	cfiobj->ops.release = cfi_release;
++	cfiobj->ops.ep_enable = cfi_ep_enable;
++	cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete;
++	cfiobj->ops.build_descriptors = cfi_build_descriptors;
++	cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf;
++
++	/* Initialize the list of active endpoints in the CFI object */
++	DWC_LIST_INIT(&cfiobj->active_eps);
++
++	return 0;
++}
++
++/**
++ * This function reads the required feature's current value into the buffer
++ *
++ * @retval: Returns negative as error, or the data length of the feature  
++ */
++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen,
++				 struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *ctrl_req)
++{
++	int retval = -DWC_E_NOT_SUPPORTED;
++	struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd);
++	uint16_t dfifo, rxfifo, txfifo;
++
++	switch (ctrl_req->wIndex) {
++		/* Whether the DDMA is enabled or not */
++	case FT_ID_DMA_MODE:
++		*buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0;
++		retval = 1;
++		break;
++
++	case FT_ID_DMA_BUFFER_SETUP:
++		retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req);
++		break;
++
++	case FT_ID_DMA_BUFF_ALIGN:
++		retval = cfi_ep_get_align_val(buf, pcd, ctrl_req);
++		break;
++
++	case FT_ID_DMA_CONCAT_SETUP:
++		retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req);
++		break;
++
++	case FT_ID_DMA_CIRCULAR:
++		CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n");
++		break;
++
++	case FT_ID_THRESHOLD_SETUP:
++		CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n");
++		break;
++
++	case FT_ID_DFIFO_DEPTH:
++		dfifo = get_dfifo_size(coreif);
++		*((uint16_t *) buf) = dfifo;
++		retval = sizeof(uint16_t);
++		break;
++
++	case FT_ID_TX_FIFO_DEPTH:
++		retval = get_txfifo_size(pcd, ctrl_req->wValue);
++		if (retval >= 0) {
++			txfifo = retval;
++			*((uint16_t *) buf) = txfifo;
++			retval = sizeof(uint16_t);
++		}
++		break;
++
++	case FT_ID_RX_FIFO_DEPTH:
++		retval = get_rxfifo_size(coreif, ctrl_req->wValue);
++		if (retval >= 0) {
++			rxfifo = retval;
++			*((uint16_t *) buf) = rxfifo;
++			retval = sizeof(uint16_t);
++		}
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * This function resets the SG for the specified EP to its default value
++ */
++static int cfi_reset_sg_val(cfi_ep_t * cfiep)
++{
++	dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
++	return 0;
++}
++
++/**
++ * This function resets the Alignment for the specified EP to its default value
++ */
++static int cfi_reset_align_val(cfi_ep_t * cfiep)
++{
++	dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
++	return 0;
++}
++
++/**
++ * This function resets the Concatenation for the specified EP to its default value
++ * This function will also set the value of the wTxBytes field to NULL after 
++ * freeing the memory previously allocated for this field.
++ */
++static int cfi_reset_concat_val(cfi_ep_t * cfiep)
++{
++	/* First we need to free the wTxBytes field */
++	if (cfiep->bm_concat->wTxBytes) {
++		DWC_FREE(cfiep->bm_concat->wTxBytes);
++		cfiep->bm_concat->wTxBytes = NULL;
++	}
++
++	dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t));
++	return 0;
++}
++
++/**
++ * This function resets all the buffer setups of the specified endpoint
++ */
++static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep)
++{
++	cfi_reset_sg_val(cfiep);
++	cfi_reset_align_val(cfiep);
++	cfi_reset_concat_val(cfiep);
++	return 0;
++}
++
++static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr,
++				     uint8_t rx_rst, uint8_t tx_rst)
++{
++	int retval = -DWC_E_INVALID;
++	uint16_t tx_siz[15];
++	uint16_t rx_siz = 0;
++	dwc_otg_pcd_ep_t *ep = NULL;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
++
++	if (rx_rst) {
++		rx_siz = params->dev_rx_fifo_size;
++		params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz;
++	}
++
++	if (tx_rst) {
++		if (ep_addr == 0) {
++			int i;
++
++			for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++				tx_siz[i] =
++				    core_if->core_params->dev_tx_fifo_size[i];
++				core_if->core_params->dev_tx_fifo_size[i] =
++				    core_if->init_txfsiz[i];
++			}
++		} else {
++
++			ep = get_ep_by_addr(pcd, ep_addr);
++
++			if (NULL == ep) {
++				CFI_INFO
++				    ("%s: Unable to get the endpoint addr=0x%02x\n",
++				     __func__, ep_addr);
++				return -DWC_E_INVALID;
++			}
++
++			tx_siz[0] =
++			    params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num -
++						     1];
++			params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] =
++			    GET_CORE_IF(pcd)->init_txfsiz[ep->
++							  dwc_ep.tx_fifo_num -
++							  1];
++		}
++	}
++
++	if (resize_fifos(GET_CORE_IF(pcd))) {
++		retval = 0;
++	} else {
++		CFI_INFO
++		    ("%s: Error resetting the feature Reset All(FIFO size)\n",
++		     __func__);
++		if (rx_rst) {
++			params->dev_rx_fifo_size = rx_siz;
++		}
++
++		if (tx_rst) {
++			if (ep_addr == 0) {
++				int i;
++				for (i = 0; i < core_if->hwcfg4.b.num_in_eps;
++				     i++) {
++					core_if->
++					    core_params->dev_tx_fifo_size[i] =
++					    tx_siz[i];
++				}
++			} else {
++				params->dev_tx_fifo_size[ep->
++							 dwc_ep.tx_fifo_num -
++							 1] = tx_siz[0];
++			}
++		}
++		retval = -DWC_E_INVALID;
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1);
++	if (retval < 0) {
++		return retval;
++	}
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_ep_reset_all_setup_vals(cfiep);
++		cfiep->ep->dwc_ep.buff_mode = BM_STANDARD;
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_ep_reset_all_setup_vals(cfiep);
++			cfiep->ep->dwc_ep.buff_mode = BM_STANDARD;
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Reset All\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd,
++					   uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_reset_sg_val(cfiep);
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_reset_sg_val(cfiep);
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Buffer Setup\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_reset_concat_val(cfiep);
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_reset_concat_val(cfiep);
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Concatenation Value\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_reset_align_val(cfiep);
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_reset_align_val(cfiep);
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Aliignment Value\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++
++}
++
++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req)
++{
++	int retval = 0;
++
++	switch (req->wIndex) {
++	case 0:
++		/* Reset all features */
++		retval = cfi_handle_reset_all(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_DMA_BUFFER_SETUP:
++		/* Reset the SG buffer setup */
++		retval =
++		    cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_DMA_CONCAT_SETUP:
++		/* Reset the Concatenation buffer setup */
++		retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_DMA_BUFF_ALIGN:
++		/* Reset the Alignment buffer setup */
++		retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_TX_FIFO_DEPTH:
++		retval =
++		    cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1);
++		pcd->cfi->need_gadget_att = 0;
++		break;
++
++	case FT_ID_RX_FIFO_DEPTH:
++		retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0);
++		pcd->cfi->need_gadget_att = 0;
++		break;
++	default:
++		break;
++	}
++	return retval;
++}
++
++/**
++ * This function sets a new value for the SG buffer setup.
++ */
++static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
++{
++	uint8_t inaddr, outaddr;
++	cfi_ep_t *epin, *epout;
++	ddma_sg_buffer_setup_t *psgval;
++	uint32_t desccount, size;
++
++	CFI_INFO("%s\n", __func__);
++
++	psgval = (ddma_sg_buffer_setup_t *) buf;
++	desccount = (uint32_t) psgval->bCount;
++	size = (uint32_t) psgval->wSize;
++
++	/* Check the DMA descriptor count */
++	if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) {
++		CFI_INFO
++		    ("%s: The count of DMA Descriptors should be between 1 and %d\n",
++		     __func__, MAX_DMA_DESCS_PER_EP);
++		return -DWC_E_INVALID;
++	}
++
++	/* Check the DMA descriptor count */
++
++	if (size == 0) {
++
++		CFI_INFO("%s: The transfer size should be at least 1 byte\n",
++			 __func__);
++
++		return -DWC_E_INVALID;
++
++	}
++
++	inaddr = psgval->bInEndpointAddress;
++	outaddr = psgval->bOutEndpointAddress;
++
++	epin = get_cfi_ep_by_addr(pcd->cfi, inaddr);
++	epout = get_cfi_ep_by_addr(pcd->cfi, outaddr);
++
++	if (NULL == epin || NULL == epout) {
++		CFI_INFO
++		    ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n",
++		     __func__, inaddr, outaddr);
++		return -DWC_E_INVALID;
++	}
++
++	epin->ep->dwc_ep.buff_mode = BM_SG;
++	dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t));
++
++	epout->ep->dwc_ep.buff_mode = BM_SG;
++	dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t));
++
++	return 0;
++}
++
++/**
++ * This function sets a new value for the buffer Alignment setup.
++ */
++static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
++{
++	cfi_ep_t *ep;
++	uint8_t addr;
++	ddma_align_buffer_setup_t *palignval;
++
++	palignval = (ddma_align_buffer_setup_t *) buf;
++	addr = palignval->bEndpointAddress;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, addr);
++		return -DWC_E_INVALID;
++	}
++
++	ep->ep->dwc_ep.buff_mode = BM_ALIGN;
++	dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t));
++
++	return 0;
++}
++
++/**
++ * This function sets a new value for the Concatenation buffer setup.
++ */
++static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
++{
++	uint8_t addr;
++	cfi_ep_t *ep;
++	struct _ddma_concat_buffer_setup_hdr *pConcatValHdr;
++	uint16_t *pVals;
++	uint32_t desccount;
++	int i;
++	uint16_t mps;
++
++	pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf;
++	desccount = (uint32_t) pConcatValHdr->bDescCount;
++	pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN);
++
++	/* Check the DMA descriptor count */
++	if (desccount > MAX_DMA_DESCS_PER_EP) {
++		CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n",
++			 __func__, MAX_DMA_DESCS_PER_EP);
++		return -DWC_E_INVALID;
++	}
++
++	addr = pConcatValHdr->bEndpointAddress;
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, addr);
++		return -DWC_E_INVALID;
++	}
++
++	mps = UGETW(ep->ep->desc->wMaxPacketSize);
++
++#if 0
++	for (i = 0; i < desccount; i++) {
++		CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]);
++	}
++	CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps);
++#endif
++
++	/* Check the wTxSizes to be less than or equal to the mps */
++	for (i = 0; i < desccount; i++) {
++		if (pVals[i] > mps) {
++			CFI_INFO
++			    ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n",
++			     __func__, i, pVals[i]);
++			return -DWC_E_INVALID;
++		}
++	}
++
++	ep->ep->dwc_ep.buff_mode = BM_CONCAT;
++	dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN);
++
++	/* Free the previously allocated storage for the wTxBytes */
++	if (ep->bm_concat->wTxBytes) {
++		DWC_FREE(ep->bm_concat->wTxBytes);
++	}
++
++	/* Allocate a new storage for the wTxBytes field */
++	ep->bm_concat->wTxBytes =
++	    DWC_ALLOC(sizeof(uint16_t) * pConcatValHdr->bDescCount);
++	if (NULL == ep->bm_concat->wTxBytes) {
++		CFI_INFO("%s: Unable to allocate memory\n", __func__);
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Copy the new values into the wTxBytes filed */
++	dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN,
++		   sizeof(uint16_t) * pConcatValHdr->bDescCount);
++
++	return 0;
++}
++
++/**
++ * This function calculates the total of all FIFO sizes
++ * 
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return The total of data FIFO sizes.
++ *
++ */
++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_params_t *params = core_if->core_params;
++	uint16_t dfifo_total = 0;
++	int i;
++
++	/* The shared RxFIFO size */
++	dfifo_total =
++	    params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size;
++
++	/* Add up each TxFIFO size to the total */
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++		dfifo_total += params->dev_tx_fifo_size[i];
++	}
++
++	return dfifo_total;
++}
++
++/**
++ * This function returns Rx FIFO size
++ * 
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return The total of data FIFO sizes.
++ *
++ */
++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue)
++{
++	switch (wValue >> 8) {
++	case 0:
++		return (core_if->pwron_rxfsiz <
++			32768) ? core_if->pwron_rxfsiz : 32768;
++		break;
++	case 1:
++		return core_if->core_params->dev_rx_fifo_size;
++		break;
++	default:
++		return -DWC_E_INVALID;
++		break;
++	}
++}
++
++/**
++ * This function returns Tx FIFO size for IN EP
++ * 
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return The total of data FIFO sizes.
++ *
++ */
++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue)
++{
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_ep_by_addr(pcd, wValue & 0xff);
++
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, wValue & 0xff);
++		return -DWC_E_INVALID;
++	}
++
++	if (!ep->dwc_ep.is_in) {
++		CFI_INFO
++		    ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n",
++		     __func__, wValue & 0xff);
++		return -DWC_E_INVALID;
++	}
++
++	switch (wValue >> 8) {
++	case 0:
++		return (GET_CORE_IF(pcd)->pwron_txfsiz
++			[ep->dwc_ep.tx_fifo_num - 1] <
++			768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep->
++							      dwc_ep.tx_fifo_num
++							      - 1] : 32768;
++		break;
++	case 1:
++		return GET_CORE_IF(pcd)->core_params->
++		    dev_tx_fifo_size[ep->dwc_ep.num - 1];
++		break;
++	default:
++		return -DWC_E_INVALID;
++		break;
++	}
++}
++
++/**
++ * This function checks if the submitted combination of 
++ * device mode FIFO sizes is possible or not.
++ * 
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return 1 if possible, 0 otherwise.
++ *
++ */
++static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if)
++{
++	uint16_t dfifo_actual = 0;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	uint16_t start_addr = 0;
++	int i;
++
++	dfifo_actual =
++	    params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++		dfifo_actual += params->dev_tx_fifo_size[i];
++	}
++
++	if (dfifo_actual > core_if->total_fifo_size) {
++		return 0;
++	}
++
++	if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16)
++		return 0;
++
++	if (params->dev_nperio_tx_fifo_size > 32768
++	    || params->dev_nperio_tx_fifo_size < 16)
++		return 0;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++
++		if (params->dev_tx_fifo_size[i] > 768
++		    || params->dev_tx_fifo_size[i] < 4)
++			return 0;
++	}
++
++	if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz)
++		return 0;
++	start_addr = params->dev_rx_fifo_size;
++
++	if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz)
++		return 0;
++	start_addr += params->dev_nperio_tx_fifo_size;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++
++		if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i])
++			return 0;
++		start_addr += params->dev_tx_fifo_size[i];
++	}
++
++	return 1;
++}
++
++/**
++ * This function resizes Device mode FIFOs
++ * 
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return 1 if successful, 0 otherwise
++ *
++ */
++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if)
++{
++	int i = 0;
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	uint32_t rx_fifo_size;
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize[15];
++
++	uint32_t rx_fsz_bak;
++	uint32_t nptxfsz_bak;
++	uint32_t txfsz_bak[15];
++
++	uint16_t start_address;
++	uint8_t retval = 1;
++
++	if (!check_fifo_sizes(core_if)) {
++		return 0;
++	}
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		rx_fsz_bak = DWC_READ_REG32(&global_regs->grxfsiz);
++		rx_fifo_size = params->dev_rx_fifo_size;
++		DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size);
++
++		/*
++		 * Tx FIFOs These FIFOs are numbered from 1 to 15.
++		 * Indexes of the FIFO size module parameters in the
++		 * dev_tx_fifo_size array and the FIFO size registers in
++		 * the dtxfsiz array run from 0 to 14.
++		 */
++
++		/* Non-periodic Tx FIFO */
++		nptxfsz_bak = DWC_READ_REG32(&global_regs->gnptxfsiz);
++		nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++		start_address = params->dev_rx_fifo_size;
++		nptxfifosize.b.startaddr = start_address;
++
++		DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++
++		start_address += nptxfifosize.b.depth;
++
++		for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++			txfsz_bak[i] = DWC_READ_REG32(&global_regs->dtxfsiz[i]);
++
++			txfifosize[i].b.depth = params->dev_tx_fifo_size[i];
++			txfifosize[i].b.startaddr = start_address;
++			DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++					txfifosize[i].d32);
++
++			start_address += txfifosize[i].b.depth;
++		}
++
++		/** Check if register values are set correctly */
++		if (rx_fifo_size != DWC_READ_REG32(&global_regs->grxfsiz)) {
++			retval = 0;
++		}
++
++		if (nptxfifosize.d32 != DWC_READ_REG32(&global_regs->gnptxfsiz)) {
++			retval = 0;
++		}
++
++		for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++			if (txfifosize[i].d32 !=
++			    DWC_READ_REG32(&global_regs->dtxfsiz[i])) {
++				retval = 0;
++			}
++		}
++
++		/** If register values are not set correctly, reset old values */
++		if (retval == 0) {
++			DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fsz_bak);
++
++			/* Non-periodic Tx FIFO */
++			DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfsz_bak);
++
++			for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++				DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++						txfsz_bak[i]);
++			}
++		}
++	} else {
++		return 0;
++	}
++
++	/* Flush the FIFOs */
++	dwc_otg_flush_tx_fifo(core_if, 0x10);	/* all Tx FIFOs */
++	dwc_otg_flush_rx_fifo(core_if);
++
++	return retval;
++}
++
++/**
++ * This function sets a new value for the buffer Alignment setup.
++ */
++static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd)
++{
++	int retval;
++	uint32_t fsiz;
++	uint16_t size;
++	uint16_t ep_addr;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
++	tx_fifo_size_setup_t *ptxfifoval;
++
++	ptxfifoval = (tx_fifo_size_setup_t *) buf;
++	ep_addr = ptxfifoval->bEndpointAddress;
++	size = ptxfifoval->wDepth;
++
++	ep = get_ep_by_addr(pcd, ep_addr);
++
++	CFI_INFO
++	    ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n",
++	     __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num);
++
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, ep_addr);
++		return -DWC_E_INVALID;
++	}
++
++	fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1];
++	params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size;
++
++	if (resize_fifos(GET_CORE_IF(pcd))) {
++		retval = 0;
++	} else {
++		CFI_INFO
++		    ("%s: Error setting the feature Tx FIFO Size for EP%d\n",
++		     __func__, ep_addr);
++		params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz;
++		retval = -DWC_E_INVALID;
++	}
++
++	return retval;
++}
++
++/**
++ * This function sets a new value for the buffer Alignment setup.
++ */
++static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd)
++{
++	int retval;
++	uint32_t fsiz;
++	uint16_t size;
++	dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
++	rx_fifo_size_setup_t *prxfifoval;
++
++	prxfifoval = (rx_fifo_size_setup_t *) buf;
++	size = prxfifoval->wDepth;
++
++	fsiz = params->dev_rx_fifo_size;
++	params->dev_rx_fifo_size = size;
++
++	if (resize_fifos(GET_CORE_IF(pcd))) {
++		retval = 0;
++	} else {
++		CFI_INFO("%s: Error setting the feature Rx FIFO Size\n",
++			 __func__);
++		params->dev_rx_fifo_size = fsiz;
++		retval = -DWC_E_INVALID;
++	}
++
++	return retval;
++}
++
++/**
++ * This function reads the SG of an EP's buffer setup into the buffer buf
++ */
++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req)
++{
++	int retval = -DWC_E_INVALID;
++	uint8_t addr;
++	cfi_ep_t *ep;
++
++	/* The Low Byte of the wValue contains a non-zero address of the endpoint */
++	addr = req->wValue & 0xFF;
++	if (addr == 0)		/* The address should be non-zero */
++		return retval;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
++			 __func__, addr);
++		return retval;
++	}
++
++	dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN);
++	retval = BS_SG_VAL_DESC_LEN;
++	return retval;
++}
++
++/**
++ * This function reads the Concatenation value of an EP's buffer mode into 
++ * the buffer buf
++ */
++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *req)
++{
++	int retval = -DWC_E_INVALID;
++	uint8_t addr;
++	cfi_ep_t *ep;
++	uint8_t desc_count;
++
++	/* The Low Byte of the wValue contains a non-zero address of the endpoint */
++	addr = req->wValue & 0xFF;
++	if (addr == 0)		/* The address should be non-zero */
++		return retval;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
++			 __func__, addr);
++		return retval;
++	}
++
++	/* Copy the header to the buffer */
++	dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN);
++	/* Advance the buffer pointer by the header size */
++	buf += BS_CONCAT_VAL_HDR_LEN;
++
++	desc_count = ep->bm_concat->hdr.bDescCount;
++	/* Copy alll the wTxBytes to the buffer */
++	dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count);
++
++	retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count;
++	return retval;
++}
++
++/**
++ * This function reads the buffer Alignment value of an EP's buffer mode into 
++ * the buffer buf
++ *
++ * @return The total number of bytes copied to the buffer or negative error code.
++ */
++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				struct cfi_usb_ctrlrequest *req)
++{
++	int retval = -DWC_E_INVALID;
++	uint8_t addr;
++	cfi_ep_t *ep;
++
++	/* The Low Byte of the wValue contains a non-zero address of the endpoint */
++	addr = req->wValue & 0xFF;
++	if (addr == 0)		/* The address should be non-zero */
++		return retval;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
++			 __func__, addr);
++		return retval;
++	}
++
++	dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN);
++	retval = BS_ALIGN_VAL_HDR_LEN;
++
++	return retval;
++}
++
++/**
++ * This function sets a new value for the specified feature
++ * 
++ * @param	pcd	A pointer to the PCD object
++ * 
++ * @return 0 if successful, negative error code otherwise to stall the DCE.
++ */
++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd)
++{
++	int retval = -DWC_E_NOT_SUPPORTED;
++	uint16_t wIndex, wValue;
++	uint8_t bRequest;
++	struct dwc_otg_core_if *coreif;
++	cfiobject_t *cfi = pcd->cfi;
++	struct cfi_usb_ctrlrequest *ctrl_req;
++	uint8_t *buf;
++	ctrl_req = &cfi->ctrl_req;
++
++	buf = pcd->cfi->ctrl_req.data;
++
++	coreif = GET_CORE_IF(pcd);
++	bRequest = ctrl_req->bRequest;
++	wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex);
++	wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue);
++
++	/* See which feature is to be modified */
++	switch (wIndex) {
++	case FT_ID_DMA_BUFFER_SETUP:
++		/* Modify the feature */
++		if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0)
++			return retval;
++
++		/* And send this request to the gadget */
++		cfi->need_gadget_att = 1;
++		break;
++
++	case FT_ID_DMA_BUFF_ALIGN:
++		if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 1;
++		break;
++
++	case FT_ID_DMA_CONCAT_SETUP:
++		/* Modify the feature */
++		if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 1;
++		break;
++
++	case FT_ID_DMA_CIRCULAR:
++		CFI_INFO("FT_ID_DMA_CIRCULAR\n");
++		break;
++
++	case FT_ID_THRESHOLD_SETUP:
++		CFI_INFO("FT_ID_THRESHOLD_SETUP\n");
++		break;
++
++	case FT_ID_DFIFO_DEPTH:
++		CFI_INFO("FT_ID_DFIFO_DEPTH\n");
++		break;
++
++	case FT_ID_TX_FIFO_DEPTH:
++		CFI_INFO("FT_ID_TX_FIFO_DEPTH\n");
++		if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 0;
++		break;
++
++	case FT_ID_RX_FIFO_DEPTH:
++		CFI_INFO("FT_ID_RX_FIFO_DEPTH\n");
++		if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 0;
++		break;
++	}
++
++	return retval;
++}
++
++#endif //DWC_UTE_CFI
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cfi.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cfi.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cfi.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cfi.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,320 @@
++/* ==========================================================================
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_CFI_H__)
++#define __DWC_OTG_CFI_H__
++
++#include "dwc_otg_pcd.h"
++#include "dwc_cfi_common.h"
++
++/**
++ * @file
++ * This file contains the CFI related OTG PCD specific common constants, 
++ * interfaces(functions and macros) and data structures.The CFI Protocol is an 
++ * optional interface for internal testing purposes that a DUT may implement to 
++ * support testing of configurable features.
++ *
++ */
++
++struct dwc_otg_pcd;
++struct dwc_otg_pcd_ep;
++
++/** OTG CFI Features (properties) ID constants */
++/** This is a request for all Core Features */
++#define FT_ID_DMA_MODE					0x0001
++#define FT_ID_DMA_BUFFER_SETUP			0x0002
++#define FT_ID_DMA_BUFF_ALIGN			0x0003
++#define FT_ID_DMA_CONCAT_SETUP			0x0004
++#define FT_ID_DMA_CIRCULAR				0x0005
++#define FT_ID_THRESHOLD_SETUP			0x0006
++#define FT_ID_DFIFO_DEPTH				0x0007
++#define FT_ID_TX_FIFO_DEPTH				0x0008
++#define FT_ID_RX_FIFO_DEPTH				0x0009
++
++/**********************************************************/
++#define CFI_INFO_DEF
++
++#ifdef CFI_INFO_DEF
++#define CFI_INFO(fmt...)	DWC_PRINTF("CFI: " fmt);
++#else
++#define CFI_INFO(fmt...)
++#endif
++
++#define min(x,y) ({ \
++	x < y ? x : y; })
++
++#define max(x,y) ({ \
++	x > y ? x : y; })
++
++/**
++ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is
++ * also used for setting up a buffer for Circular DDMA.
++ */
++struct _ddma_sg_buffer_setup {
++#define BS_SG_VAL_DESC_LEN	6
++	/* The OUT EP address */
++	uint8_t bOutEndpointAddress;
++	/* The IN EP address */
++	uint8_t bInEndpointAddress;
++	/* Number of bytes to put between transfer segments (must be DWORD boundaries) */
++	uint8_t bOffset;
++	/* The number of transfer segments (a DMA descriptors per each segment) */
++	uint8_t bCount;
++	/* Size (in byte) of each transfer segment */
++	uint16_t wSize;
++} __attribute__ ((packed));
++typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t;
++
++/** Descriptor DMA Concatenation Buffer setup structure */
++struct _ddma_concat_buffer_setup_hdr {
++#define BS_CONCAT_VAL_HDR_LEN	4
++	/* The endpoint for which the buffer is to be set up */
++	uint8_t bEndpointAddress;
++	/* The count of descriptors to be used */
++	uint8_t bDescCount;
++	/* The total size of the transfer */
++	uint16_t wSize;
++} __attribute__ ((packed));
++typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t;
++
++/** Descriptor DMA Concatenation Buffer setup structure */
++struct _ddma_concat_buffer_setup {
++	/* The SG header */
++	ddma_concat_buffer_setup_hdr_t hdr;
++
++	/* The XFER sizes pointer (allocated dynamically) */
++	uint16_t *wTxBytes;
++} __attribute__ ((packed));
++typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t;
++
++/** Descriptor DMA Alignment Buffer setup structure */
++struct _ddma_align_buffer_setup {
++#define BS_ALIGN_VAL_HDR_LEN	2
++	uint8_t bEndpointAddress;
++	uint8_t bAlign;
++} __attribute__ ((packed));
++typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t;
++
++/** Transmit FIFO Size setup structure */
++struct _tx_fifo_size_setup {
++	uint8_t bEndpointAddress;
++	uint16_t wDepth;
++} __attribute__ ((packed));
++typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t;
++
++/** Transmit FIFO Size setup structure */
++struct _rx_fifo_size_setup {
++	uint16_t wDepth;
++} __attribute__ ((packed));
++typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t;
++
++/**
++ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest
++ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer
++ * to the data returned in the data stage of a 3-stage Control Write requests.
++ */
++struct cfi_usb_ctrlrequest {
++	uint8_t bRequestType;
++	uint8_t bRequest;
++	uint16_t wValue;
++	uint16_t wIndex;
++	uint16_t wLength;
++	uint8_t *data;
++} UPACKED;
++
++/*---------------------------------------------------------------------------*/
++
++/**
++ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures.
++ * This structure is used to store the buffer setup data for any
++ * enabled endpoint in the PCD.
++ */
++struct cfi_ep {
++	/* Entry for the list container */
++	dwc_list_link_t lh;
++	/* Pointer to the active PCD endpoint structure */
++	struct dwc_otg_pcd_ep *ep;
++	/* The last descriptor in the chain of DMA descriptors of the endpoint */
++	struct dwc_otg_dma_desc *dma_desc_last;
++	/* The SG feature value */
++	ddma_sg_buffer_setup_t *bm_sg;
++	/* The Circular feature value */
++	ddma_sg_buffer_setup_t *bm_circ;
++	/* The Concatenation feature value */
++	ddma_concat_buffer_setup_t *bm_concat;
++	/* The Alignment feature value */
++	ddma_align_buffer_setup_t *bm_align;
++	/* XFER length */
++	uint32_t xfer_len;
++	/*
++	 * Count of DMA descriptors currently used.
++	 * The total should not exceed the MAX_DMA_DESCS_PER_EP value
++	 * defined in the dwc_otg_cil.h
++	 */
++	uint32_t desc_count;
++};
++typedef struct cfi_ep cfi_ep_t;
++
++typedef struct cfi_dma_buff {
++#define CFI_IN_BUF_LEN	1024
++#define CFI_OUT_BUF_LEN	1024
++	dma_addr_t addr;
++	uint8_t *buf;
++} cfi_dma_buff_t;
++
++struct cfiobject;
++
++/**
++ * This is the interface for the CFI operations.
++ *
++ * @param	ep_enable			Called when any endpoint is enabled and activated.
++ * @param	release				Called when the CFI object is released and it needs to correctly
++ *								deallocate the dynamic memory
++ * @param	ctrl_write_complete	Called when the data stage of the request is complete
++ */
++typedef struct cfi_ops {
++	int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd,
++			  struct dwc_otg_pcd_ep * ep);
++	void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd,
++			       struct dwc_otg_pcd_ep * ep, dma_addr_t * dma,
++			       unsigned size, gfp_t flags);
++	void (*release) (struct cfiobject * cfi);
++	int (*ctrl_write_complete) (struct cfiobject * cfi,
++				    struct dwc_otg_pcd * pcd);
++	void (*build_descriptors) (struct cfiobject * cfi,
++				   struct dwc_otg_pcd * pcd,
++				   struct dwc_otg_pcd_ep * ep,
++				   dwc_otg_pcd_request_t * req);
++} cfi_ops_t;
++
++struct cfiobject {
++	cfi_ops_t ops;
++	struct dwc_otg_pcd *pcd;
++	struct usb_gadget *gadget;
++
++	/* Buffers used to send/receive CFI-related request data */
++	cfi_dma_buff_t buf_in;
++	cfi_dma_buff_t buf_out;
++
++	/* CFI specific Control request wrapper */
++	struct cfi_usb_ctrlrequest ctrl_req;
++
++	/* The list of active EP's in the PCD of type cfi_ep_t */
++	dwc_list_link_t active_eps;
++
++	/* This flag shall control the propagation of a specific request
++	 * to the gadget's processing routines.
++	 * 0 - no gadget handling
++	 * 1 - the gadget needs to know about this request (w/o completing a status
++	 * phase - just return a 0 to the _setup callback)
++	 */
++	uint8_t need_gadget_att;
++
++	/* Flag indicating whether the status IN phase needs to be
++	 * completed by the PCD
++	 */
++	uint8_t need_status_in_complete;
++};
++typedef struct cfiobject cfiobject_t;
++
++#define DUMP_MSG
++
++#if defined(DUMP_MSG)
++static inline void dump_msg(const u8 * buf, unsigned int length)
++{
++	unsigned int start, num, i;
++	char line[52], *p;
++
++	if (length >= 512)
++		return;
++
++	start = 0;
++	while (length > 0) {
++		num = min(length, 16u);
++		p = line;
++		for (i = 0; i < num; ++i) {
++			if (i == 8)
++				*p++ = ' ';
++			DWC_SPRINTF(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_DEBUG("%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 * buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function returns a pointer to cfi_ep_t object with the addr address.
++ */
++static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi,
++						uint8_t addr)
++{
++	struct cfi_ep *pcfiep;
++	dwc_list_link_t *tmp;
++
++	DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++		pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++
++		if (pcfiep->ep->desc->bEndpointAddress == addr) {
++			return pcfiep;
++		}
++	}
++
++	return NULL;
++}
++
++/**
++ * This function returns a pointer to cfi_ep_t object that matches
++ * the dwc_otg_pcd_ep object.
++ */
++static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi,
++						  struct dwc_otg_pcd_ep *ep)
++{
++	struct cfi_ep *pcfiep = NULL;
++	dwc_list_link_t *tmp;
++
++	DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++		pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++		if (pcfiep->ep == ep) {
++			return pcfiep;
++		}
++	}
++	return NULL;
++}
++
++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl);
++
++#endif /* (__DWC_OTG_CFI_H__) */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,7151 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
++ * $Revision: #191 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * The CIL manages the memory map for the core so that the HCD and PCD
++ * don't have to do this separately. It also handles basic tasks like
++ * reading/writing the registers and data FIFOs in the controller.
++ * Some of the data access functions provide encapsulation of several
++ * operations required to perform a task, such as writing multiple
++ * registers to start a transfer. Finally, the CIL performs basic
++ * services that are not specific to either the host or device modes
++ * of operation. These services include management of the OTG Host
++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
++ * Diagnostic API is also provided to allow testing of the controller
++ * hardware.
++ *
++ * The Core Interface Layer has the following requirements:
++ * - Provides basic controller operations.
++ * - Minimal use of OS services. 
++ * - The OS services used will be abstracted by using inline functions
++ *	 or macros.
++ *
++ */
++
++#include "dwc_os.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if);
++
++/**
++ * This function is called to initialize the DWC_otg CSR data
++ * structures. The register addresses in the device and host
++ * structures are initialized from the base address supplied by the
++ * caller. The calling function must make the OS calls to get the
++ * base address of the DWC_otg controller registers. The core_params
++ * argument holds the parameters that specify how the core should be
++ * configured.
++ *
++ * @param reg_base_addr Base address of DWC_otg core registers
++ *
++ */
++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr)
++{
++	dwc_otg_core_if_t *core_if = 0;
++	dwc_otg_dev_if_t *dev_if = 0;
++	dwc_otg_host_if_t *host_if = 0;
++	uint8_t *reg_base = (uint8_t *) reg_base_addr;
++	int i = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr);
++
++	core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t));
++
++	if (core_if == NULL) {
++		DWC_DEBUGPL(DBG_CIL,
++			    "Allocation of dwc_otg_core_if_t failed\n");
++		return 0;
++	}
++	core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base;
++
++	/*
++	 * Allocate the Device Mode structures.
++	 */
++	dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t));
++
++	if (dev_if == NULL) {
++		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	dev_if->dev_global_regs =
++	    (dwc_otg_device_global_regs_t *) (reg_base +
++					      DWC_DEV_GLOBAL_REG_OFFSET);
++
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
++		    (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
++		     (i * DWC_EP_REG_OFFSET));
++
++		dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
++		    (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
++		     (i * DWC_EP_REG_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
++			    i, &dev_if->in_ep_regs[i]->diepctl);
++		DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
++			    i, &dev_if->out_ep_regs[i]->doepctl);
++	}
++
++	dev_if->speed = 0;	// unknown
++
++	core_if->dev_if = dev_if;
++
++	/*
++	 * Allocate the Host Mode structures.
++	 */
++	host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t));
++
++	if (host_if == NULL) {
++		DWC_DEBUGPL(DBG_CIL,
++			    "Allocation of dwc_otg_host_if_t failed\n");
++		DWC_FREE(dev_if);
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
++	    (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
++
++	host_if->hprt0 =
++	    (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
++
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
++		    (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
++		     (i * DWC_OTG_CHAN_REGS_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
++			    i, &host_if->hc_regs[i]->hcchar);
++	}
++
++	host_if->num_host_channels = MAX_EPS_CHANNELS;
++	core_if->host_if = host_if;
++
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		core_if->data_fifo[i] =
++		    (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET +
++				  (i * DWC_OTG_DATA_FIFO_SIZE));
++		DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08lx\n",
++			    i, (unsigned long)core_if->data_fifo[i]);
++	}
++
++	core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET);
++
++	/* Initiate lx_state to L3 disconnected state */
++	core_if->lx_state = DWC_OTG_L3;
++	/*
++	 * Store the contents of the hardware configuration registers here for
++	 * easy access later.
++	 */
++	core_if->hwcfg1.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1);
++	core_if->hwcfg2.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2);
++	core_if->hwcfg3.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3);
++	core_if->hwcfg4.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4);
++
++	/* Force host mode to get HPTXFSIZ exact power on value */
++	{
++		gusbcfg_data_t gusbcfg = {.d32 = 0 };
++		gusbcfg.d32 =  DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++		gusbcfg.b.force_host_mode = 1;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
++		dwc_mdelay(100); 
++		core_if->hptxfsiz.d32 =
++		DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
++		gusbcfg.d32 =  DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++		gusbcfg.b.force_host_mode = 0;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
++		dwc_mdelay(100); 
++	}
++
++	DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32);
++	DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32);
++	DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32);
++	DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32);
++
++	core_if->hcfg.d32 =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	core_if->dcfg.d32 =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++
++	DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32);
++	DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32);
++
++	DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode);
++	DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture);
++	DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep);
++	DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n",
++		    core_if->hwcfg2.b.num_host_chan);
++	DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n",
++		    core_if->hwcfg2.b.nonperio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n",
++		    core_if->hwcfg2.b.host_perio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n",
++		    core_if->hwcfg2.b.dev_token_q_depth);
++
++	DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n",
++		    core_if->hwcfg3.b.dfifo_depth);
++	DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n",
++		    core_if->hwcfg3.b.xfer_size_cntr_width);
++
++	/*
++	 * Set the SRP sucess bit for FS-I2c
++	 */
++	core_if->srp_success = 0;
++	core_if->srp_timer_started = 0;
++
++	/*
++	 * Create new workqueue and init works
++	 */
++	core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg");
++	if (core_if->wq_otg == 0) {
++		DWC_WARN("DWC_WORKQ_ALLOC failed\n");
++		DWC_FREE(host_if);
++		DWC_FREE(dev_if);
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid);
++
++	DWC_PRINTF("Core Release: %x.%x%x%x\n",
++		   (core_if->snpsid >> 12 & 0xF),
++		   (core_if->snpsid >> 8 & 0xF),
++		   (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF));
++
++	core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer",
++					     w_wakeup_detected, core_if);
++	if (core_if->wkp_timer == 0) {
++		DWC_WARN("DWC_TIMER_ALLOC failed\n");
++		DWC_FREE(host_if);
++		DWC_FREE(dev_if);
++		DWC_WORKQ_FREE(core_if->wq_otg);
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	if (dwc_otg_setup_params(core_if)) {
++		DWC_WARN("Error while setting core params\n");
++	}
++
++	core_if->hibernation_suspend = 0;
++
++	/** ADP initialization */
++	dwc_otg_adp_init(core_if);
++	
++	return core_if;
++}
++
++/**
++ * This function frees the structures allocated by dwc_otg_cil_init().
++ *
++ * @param core_if The core interface pointer returned from
++ * 		  dwc_otg_cil_init().
++ *
++ */
++void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if)
++{
++	dctl_data_t dctl = {.d32 = 0 };
++	DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if);
++
++	/* Disable all interrupts */
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 1, 0);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0);
++
++	dctl.b.sftdiscon = 1;
++	if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0,
++				 dctl.d32);
++	}
++
++	if (core_if->wq_otg) {
++		DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500);
++		DWC_WORKQ_FREE(core_if->wq_otg);
++	}
++	if (core_if->dev_if) {
++		DWC_FREE(core_if->dev_if);
++	}
++	if (core_if->host_if) {
++		DWC_FREE(core_if->host_if);
++	}
++
++	/** Remove ADP Stuff  */
++	dwc_otg_adp_remove(core_if);
++	if (core_if->core_params) {
++		DWC_FREE(core_if->core_params);
++	}
++	if (core_if->wkp_timer) {
++		DWC_TIMER_FREE(core_if->wkp_timer);
++	}
++	if (core_if->srp_timer) {
++		DWC_TIMER_FREE(core_if->srp_timer);
++	}
++	DWC_FREE(core_if);
++}
++
++/**
++ * This function enables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if)
++{
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++	ahbcfg.b.glblintrmsk = 1;	/* Enable interrupts */
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++
++/**
++ * This function disables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if)
++{
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++	ahbcfg.b.glblintrmsk = 1;	/* Disable interrupts */
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++/**
++ * This function initializes the commmon interrupts, used in both
++ * device and host modes.
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ *
++ */
++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	/* Clear any pending OTG Interrupts */
++	DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF);
++
++	/* Clear any pending interrupts */
++	DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/*
++	 * Enable the interrupts in the GINTMSK.
++	 */
++	intr_mask.b.modemismatch = 1;
++	intr_mask.b.otgintr = 1;
++
++	if (!core_if->dma_enable) {
++		intr_mask.b.rxstsqlvl = 1;
++	}
++
++	intr_mask.b.conidstschng = 1;
++	intr_mask.b.wkupintr = 1;
++	intr_mask.b.disconnect = 0;
++	intr_mask.b.usbsuspend = 1;
++	intr_mask.b.sessreqintr = 1;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	if (core_if->core_params->lpm_enable) {
++		intr_mask.b.lpmtranrcvd = 1;
++	}
++#endif
++	DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32);
++}
++
++/*
++ * The restore operation is modified to support Synopsys Emulated Powerdown and
++ * Hibernation. This function is for exiting from Device mode hibernation by
++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
++ * @param core_if Programming view of DWC_otg controller.
++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host.
++ * @param reset - indicates whether resume is initiated by Reset.
++ */
++int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
++				       int rem_wakeup, int reset)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++
++	int timeout = 2000;
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__);
++	/* Switch-on voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Assert Restore signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	if (rem_wakeup) {
++		dwc_udelay(70);
++	}
++
++	/* Deassert Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Mask interrupts from gpwrdn */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.connect_det_msk = 1;
++	gpwrdn.b.srp_det_msk = 1;
++	gpwrdn.b.disconn_det_msk = 1;
++	gpwrdn.b.rst_det_msk = 1;
++	gpwrdn.b.lnstchng_msk = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Indicates that we are going out from hibernation */
++	core_if->hibernation_suspend = 0;
++
++	/*
++	 * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1
++	 * indicates restore from remote_wakeup
++	 */
++	restore_essential_regs(core_if, rem_wakeup, 0);
++
++	/*
++	 * Wait a little for seeing new value of variable hibernation_suspend if
++	 * Restore done interrupt received before polling
++	 */
++	dwc_udelay(10);
++
++	if (core_if->hibernation_suspend == 0) {
++		/*
++		 * Wait For Restore_done Interrupt. This mechanism of polling the 
++		 * interrupt is introduced to avoid any possible race conditions
++		 */
++		do {
++			gintsts_data_t gintsts;
++			gintsts.d32 =
++			    DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			if (gintsts.b.restoredone) {
++				gintsts.d32 = 0;
++				gintsts.b.restoredone = 1;
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++						gintsts, gintsts.d32);
++				DWC_PRINTF("Restore Done Interrupt seen\n");
++				break;
++			}
++			dwc_udelay(10);
++		} while (--timeout);
++		if (!timeout) {
++			DWC_PRINTF("Restore Done interrupt wasn't generated here\n");
++		}
++	}
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* De-assert Restore */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	if (!rem_wakeup) {
++		pcgcctl.d32 = 0;
++		pcgcctl.b.rstpdwnmodule = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++	}
++
++	/* Restore GUSBCFG and DCFG */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
++			core_if->gr_backup->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
++			core_if->dr_backup->dcfg);
++
++	/* De-assert Wakeup Logic */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	if (!rem_wakeup) {
++		/* Set Device programming done bit */
++		dctl.b.pwronprgdone = 1;
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	} else {
++		/* Start Remote Wakeup Signaling */
++		dctl.d32 = core_if->dr_backup->dctl;
++		dctl.b.rmtwkupsig = 1;
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++	}
++
++	dwc_mdelay(2);
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Restore global registers */
++	dwc_otg_restore_global_regs(core_if);
++	/* Restore device global registers */
++	dwc_otg_restore_dev_regs(core_if, rem_wakeup);
++
++	if (rem_wakeup) {
++		dwc_mdelay(7);
++		dctl.d32 = 0;
++		dctl.b.rmtwkupsig = 1;
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
++	}
++
++	core_if->hibernation_suspend = 0;
++	/* The core will be in ON STATE */
++	core_if->lx_state = DWC_OTG_L0;
++	DWC_PRINTF("Hibernation recovery completes here\n");
++
++	return 1;
++}
++
++/*
++ * The restore operation is modified to support Synopsys Emulated Powerdown and
++ * Hibernation. This function is for exiting from Host mode hibernation by
++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
++ * @param core_if Programming view of DWC_otg controller.
++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host.
++ * @param reset - indicates whether resume is initiated by Reset.
++ */
++int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if,
++				     int rem_wakeup, int reset)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	hprt0_data_t hprt0 = {.d32 = 0 };
++
++	int timeout = 2000;
++
++	DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__);
++	/* Switch-on voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Assert Restore signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	if (!rem_wakeup) {
++		dwc_udelay(50);
++	}
++
++	/* Deassert Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	gpwrdn.d32 = 0;
++	gpwrdn.b.connect_det_msk = 1;
++	gpwrdn.b.srp_det_msk = 1;
++	gpwrdn.b.disconn_det_msk = 1;
++	gpwrdn.b.rst_det_msk = 1;
++	gpwrdn.b.lnstchng_msk = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Indicates that we are going out from hibernation */
++	core_if->hibernation_suspend = 0;
++
++	/* Set Restore Essential Regs bit in PCGCCTL register */
++	restore_essential_regs(core_if, rem_wakeup, 1);
++
++	/* Wait a little for seeing new value of variable hibernation_suspend if
++	 * Restore done interrupt received before polling */
++	dwc_udelay(10);
++
++	if (core_if->hibernation_suspend == 0) {
++		/* Wait For Restore_done Interrupt. This mechanism of polling the
++		 * interrupt is introduced to avoid any possible race conditions
++		 */
++		do {
++			gintsts_data_t gintsts;
++			gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			if (gintsts.b.restoredone) {
++				gintsts.d32 = 0;
++				gintsts.b.restoredone = 1;
++         		DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++				DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n");	
++				break;
++			}
++			dwc_udelay(10);
++		} while (--timeout);
++		if (!timeout) {
++			DWC_WARN("Restore Done interrupt wasn't generated\n");
++		}
++	}
++
++	/* Set the flag's value to 0 again after receiving restore done interrupt */
++	core_if->hibernation_suspend = 0;
++
++	/* This step is not described in functional spec but if not wait for this
++	 * delay, mismatch interrupts occurred because just after restore core is
++	 * in Device mode(gintsts.curmode == 0) */
++	dwc_mdelay(100);
++
++	/* Clear all pending interrupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* De-assert Restore */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Restore GUSBCFG and HCFG */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
++			core_if->gr_backup->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg,
++			core_if->hr_backup->hcfg_local);
++
++	/* De-assert Wakeup Logic */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Start the Resume operation by programming HPRT0 */
++	hprt0.d32 = core_if->hr_backup->hprt0_local;
++	hprt0.b.prtpwr = 1;
++	hprt0.b.prtena = 0;
++	hprt0.b.prtsusp = 0;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++	DWC_PRINTF("Resume Starts Now\n");
++	if (!reset) {		// Indicates it is Resume Operation
++		hprt0.d32 = core_if->hr_backup->hprt0_local;
++		hprt0.b.prtres = 1;
++		hprt0.b.prtpwr = 1;
++		hprt0.b.prtena = 0;
++		hprt0.b.prtsusp = 0;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++		if (!rem_wakeup)
++			hprt0.b.prtres = 0;
++		/* Wait for Resume time and then program HPRT again */
++		dwc_mdelay(100);
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++	} else {		// Indicates it is Reset Operation
++		hprt0.d32 = core_if->hr_backup->hprt0_local;
++		hprt0.b.prtrst = 1;
++		hprt0.b.prtpwr = 1;
++		hprt0.b.prtena = 0;
++		hprt0.b.prtsusp = 0;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++		/* Wait for Reset time and then program HPRT again */
++		dwc_mdelay(60);
++		hprt0.b.prtrst = 0;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	}
++	/* Clear all interrupt status */
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtconndet = 1;
++	hprt0.b.prtenchng = 1;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Restore global registers */
++	dwc_otg_restore_global_regs(core_if);
++	/* Restore host global registers */
++	dwc_otg_restore_host_regs(core_if, reset);
++
++	/* The core will be in ON STATE */
++	core_if->lx_state = DWC_OTG_L0;
++	DWC_PRINTF("Hibernation recovery is complete here\n");
++	return 0;
++}
++
++/** Saves some register values into system memory. */
++int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++	int i;
++
++	gr = core_if->gr_backup;
++	if (!gr) {
++		gr = DWC_ALLOC(sizeof(*gr));
++		if (!gr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->gr_backup = gr;
++	}
++
++	gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++	gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg);
++	gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++	gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz);
++	gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++#endif
++	gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl);
++	gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl);
++	gr->gdfifocfg_local =
++	    DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg);
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		gr->dtxfsiz_local[i] =
++		    DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i]));
++	}
++
++	DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl   = %08x\n", gr->gotgctl_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk   = %08x\n", gr->gintmsk_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg   = %08x\n", gr->gahbcfg_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg   = %08x\n", gr->gusbcfg_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz   = %08x\n", gr->grxfsiz_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n",
++		    gr->gnptxfsiz_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz  = %08x\n",
++		    gr->hptxfsiz_local);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg   = %08x\n", gr->glpmcfg_local);
++#endif
++	DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl   = %08x\n", gr->gi2cctl_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl   = %08x\n", gr->pcgcctl_local);
++	DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg   = %08x\n",gr->gdfifocfg_local);
++
++	return 0;
++}
++
++/** Saves GINTMSK register before setting the msk bits. */
++int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++
++	gr = core_if->gr_backup;
++	if (!gr) {
++		gr = DWC_ALLOC(sizeof(*gr));
++		if (!gr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->gr_backup = gr;
++	}
++
++	gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++
++	DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk   = %08x\n", gr->gintmsk_local);
++
++	return 0;
++}
++
++int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_dev_regs_backup *dr;
++	int i;
++
++	dr = core_if->dr_backup;
++	if (!dr) {
++		dr = DWC_ALLOC(sizeof(*dr));
++		if (!dr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->dr_backup = dr;
++	}
++
++	dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++	dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	dr->daintmsk =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
++	dr->diepmsk =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk);
++	dr->doepmsk =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk);
++
++	for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		dr->diepctl[i] =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl);
++		dr->dieptsiz[i] =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz);
++		dr->diepdma[i] =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma);
++	}
++
++	DWC_DEBUGPL(DBG_ANY,
++		    "=============Backing Host registers==============\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up dcfg            = %08x\n", dr->dcfg);
++	DWC_DEBUGPL(DBG_ANY, "Backed up dctl        = %08x\n", dr->dctl);
++	DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk            = %08x\n",
++		    dr->daintmsk);
++	DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk        = %08x\n", dr->diepmsk);
++	DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk        = %08x\n", dr->doepmsk);
++	for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d]        = %08x\n", i,
++			    dr->diepctl[i]);
++		DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d]        = %08x\n",
++			    i, dr->dieptsiz[i]);
++		DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d]        = %08x\n", i,
++			    dr->diepdma[i]);
++	}
++
++	return 0;
++}
++
++int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_host_regs_backup *hr;
++	int i;
++
++	hr = core_if->hr_backup;
++	if (!hr) {
++		hr = DWC_ALLOC(sizeof(*hr));
++		if (!hr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->hr_backup = hr;
++	}
++
++	hr->hcfg_local =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	hr->haintmsk_local =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk);
++	for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
++		hr->hcintmsk_local[i] =
++		    DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk);
++	}
++	hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0);
++	hr->hfir_local =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
++
++	DWC_DEBUGPL(DBG_ANY,
++		    "=============Backing Host registers===============\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up hcfg		= %08x\n",
++		    hr->hcfg_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local);
++	for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
++		DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i,
++			    hr->hcintmsk_local[i]);
++	}
++	DWC_DEBUGPL(DBG_ANY, "Backed up hprt0           = %08x\n",
++		    hr->hprt0_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up hfir           = %08x\n",
++		    hr->hfir_local);
++
++	return 0;
++}
++
++int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++	int i;
++
++	gr = core_if->gr_backup;
++	if (!gr) {
++		return -DWC_E_INVALID;
++	}
++   
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz,
++			gr->gnptxfsiz_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz,
++			gr->hptxfsiz_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg,
++			gr->gdfifocfg_local);
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i],
++				gr->dtxfsiz_local[i]);
++	}
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++	DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg,
++			(gr->gahbcfg_local));
++	return 0;
++}
++
++int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup)
++{
++	struct dwc_otg_dev_regs_backup *dr;
++	int i;
++
++	dr = core_if->dr_backup;
++
++	if (!dr) {
++		return -DWC_E_INVALID;
++	}
++
++	if (!rem_wakeup) {
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
++				dr->dctl);
++	}
++	
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk);
++
++	for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]);
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]);
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]);
++	}
++	
++	return 0;
++}
++
++int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset)
++{
++	struct dwc_otg_host_regs_backup *hr;
++	int i;
++	hr = core_if->hr_backup;
++
++	if (!hr) {
++		return -DWC_E_INVALID;
++	}
++
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local);
++	//if (!reset)
++	//{
++	//      DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local);
++	//}
++
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk,
++			hr->haintmsk_local);
++	for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
++		DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk,
++				hr->hcintmsk_local[i]);
++	}
++
++	return 0;
++}
++
++int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++
++	gr = core_if->gr_backup;
++
++	/* Restore values for LPM and I2C */
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local);
++#endif
++	DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local);
++
++	return 0;
++}
++
++int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host)
++{
++	struct dwc_otg_global_regs_backup *gr;
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	gahbcfg_data_t gahbcfg = {.d32 = 0 };
++	gusbcfg_data_t gusbcfg = {.d32 = 0 };
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++	/* Restore LPM and I2C registers */
++	restore_lpm_i2c_regs(core_if);
++
++	/* Set PCGCCTL to 0 */
++	DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000);
++
++	gr = core_if->gr_backup;
++	/* Load restore values for [31:14] bits */
++	DWC_WRITE_REG32(core_if->pcgcctl,
++			((gr->pcgcctl_local & 0xffffc000) | 0x00020000));
++
++	/* Umnask global Interrupt in GAHBCFG and restore it */
++	gahbcfg.d32 = gr->gahbcfg_local;
++	gahbcfg.b.glblintrmsk = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32);
++
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Unmask restore done interrupt */
++	gintmsk.b.restoredone = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++
++	/* Restore GUSBCFG and HCFG/DCFG */
++	gusbcfg.d32 = core_if->gr_backup->gusbcfg_local;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
++
++	if (is_host) {
++		hcfg_data_t hcfg = {.d32 = 0 };
++		hcfg.d32 = core_if->hr_backup->hcfg_local;
++		DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg,
++				hcfg.d32);
++
++		/* Load restore values for [31:14] bits */
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
++
++		if (rmode)
++			pcgcctl.b.restoremode = 1;
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++		dwc_udelay(10);
++
++		/* Load restore values for [31:14] bits and set EssRegRestored bit */
++		pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.b.ess_reg_restored = 1;
++		if (rmode)
++			pcgcctl.b.restoremode = 1;
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	} else {
++		dcfg_data_t dcfg = {.d32 = 0 };
++		dcfg.d32 = core_if->dr_backup->dcfg;
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++		/* Load restore values for [31:14] bits */
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
++		if (!rmode) {
++			pcgcctl.d32 |= 0x208;
++		}
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++		dwc_udelay(10);
++
++		/* Load restore values for [31:14] bits */
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
++		pcgcctl.b.ess_reg_restored = 1;
++		if (!rmode)
++			pcgcctl.d32 |= 0x208;
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	}
++
++	return 0;
++}
++
++/**
++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
++ * type.
++ */
++static void init_fslspclksel(dwc_otg_core_if_t * core_if)
++{
++	uint32_t val;
++	hcfg_data_t hcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (core_if->core_params->ulpi_fs_ls)) ||
++	    (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = DWC_HCFG_48_MHZ;
++	} else {
++		/* High speed PHY running at full speed or high speed */
++		val = DWC_HCFG_30_60_MHZ;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
++	hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.fslspclksel = val;
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/**
++ * Initializes the DevSpd field of the DCFG register depending on the PHY type
++ * and the enumeration speed of the device.
++ */
++static void init_devspd(dwc_otg_core_if_t * core_if)
++{
++	uint32_t val;
++	dcfg_data_t dcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (core_if->core_params->ulpi_fs_ls)) ||
++	    (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = 0x3;
++	} else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		/* High speed PHY running at full speed */
++		val = 0x1;
++	} else {
++		/* High speed PHY running at high speed */
++		val = 0x0;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++
++	dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++/**
++ * This function calculates the number of IN EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if)
++{
++	uint32_t num_in_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
++	uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
++	int i;
++
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x1))
++			num_in_eps++;
++
++		hwcfg1 >>= 2;
++	}
++
++	if (core_if->hwcfg4.b.ded_fifo_en) {
++		num_in_eps =
++		    (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
++	}
++
++	return num_in_eps;
++}
++
++/**
++ * This function calculates the number of OUT EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if)
++{
++	uint32_t num_out_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
++	int i;
++
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x1))
++			num_out_eps++;
++
++		hwcfg1 >>= 2;
++	}
++	return num_out_eps;
++}
++
++/**
++ * This function initializes the DWC_otg controller registers and
++ * prepares the core for device mode or host mode operation.
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ *
++ */
++void dwc_otg_core_init(dwc_otg_core_if_t * core_if)
++{
++	int i = 0;
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++	gusbcfg_data_t usbcfg = {.d32 = 0 };
++	gi2cctl_data_t i2cctl = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n",
++                    core_if, global_regs);
++
++	/* Common Initialization */
++	usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++
++	/* Program the ULPI External VBUS bit if needed */
++	usbcfg.b.ulpi_ext_vbus_drv =
++	    (core_if->core_params->phy_ulpi_ext_vbus ==
++	     DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
++
++	/* Set external TS Dline pulsing */
++	usbcfg.b.term_sel_dl_pulse =
++	    (core_if->core_params->ts_dline == 1) ? 1 : 0;
++	DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++	/* Reset the Controller */
++	dwc_otg_core_reset(core_if);
++
++	core_if->adp_enable = core_if->core_params->adp_supp_enable;
++	core_if->power_down = core_if->core_params->power_down;
++	core_if->otg_sts = 0;
++
++	/* Initialize parameters from Hardware configuration registers. */
++	dev_if->num_in_eps = calc_num_in_eps(core_if);
++	dev_if->num_out_eps = calc_num_out_eps(core_if);
++
++	DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",
++		    core_if->hwcfg4.b.num_dev_perio_in_ep);
++
++	for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++		dev_if->perio_tx_fifo_size[i] =
++		    DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
++			    i, dev_if->perio_tx_fifo_size[i]);
++	}
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++		dev_if->tx_fifo_size[i] =
++		    DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
++			    i, dev_if->tx_fifo_size[i]);
++	}
++
++	core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
++	core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz);
++	core_if->nperio_tx_fifo_size =
++	    DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16;
++
++	DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n",
++		    core_if->nperio_tx_fifo_size);
++
++	/* This programming sequence needs to happen in FS mode before any other
++	 * programming occurs */
++	if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
++	    (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* If FS mode with FS PHY */
++
++		/* core_init() is now called on every switch so only call the
++		 * following for the first time through. */
++		if (!core_if->phy_init_done) {
++			core_if->phy_init_done = 1;
++			DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
++			usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++			usbcfg.b.physel = 1;
++			DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++			/* Reset after a PHY select */
++			dwc_otg_core_reset(core_if);
++		}
++
++		/* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.      Also
++		 * do this on HNP Dev/Host mode switches (done in dev_init and
++		 * host_init). */
++		if (dwc_otg_is_host_mode(core_if)) {
++			init_fslspclksel(core_if);
++		} else {
++			init_devspd(core_if);
++		}
++
++		if (core_if->core_params->i2c_enable) {
++			DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
++			/* Program GUSBCFG.OtgUtmifsSel to I2C */
++			usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++			usbcfg.b.otgutmifssel = 1;
++			DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++			/* Program GI2CCTL.I2CEn */
++			i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl);
++			i2cctl.b.i2cdevaddr = 1;
++			i2cctl.b.i2cen = 0;
++			DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32);
++			i2cctl.b.i2cen = 1;
++			DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32);
++		}
++
++	} /* endif speed == DWC_SPEED_PARAM_FULL */
++	else {
++		/* High speed PHY. */
++		if (!core_if->phy_init_done) {
++			core_if->phy_init_done = 1;
++			/* HS PHY parameters.  These parameters are preserved
++			 * during soft reset so only program the first time.  Do
++			 * a soft reset immediately after setting phyif.  */
++
++			if (core_if->core_params->phy_type == 2) {
++				/* ULPI interface */
++				usbcfg.b.ulpi_utmi_sel = 1;
++				usbcfg.b.phyif = 0;
++				usbcfg.b.ddrsel =
++				    core_if->core_params->phy_ulpi_ddr;
++			} else if (core_if->core_params->phy_type == 1) {
++				/* UTMI+ interface */
++				usbcfg.b.ulpi_utmi_sel = 0;
++				if (core_if->core_params->phy_utmi_width == 16) {
++					usbcfg.b.phyif = 1;
++
++				} else {
++					usbcfg.b.phyif = 0;
++				}
++			} else {
++				DWC_ERROR("FS PHY TYPE\n");
++			}
++			DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++			/* Reset after setting the PHY parameters */
++			dwc_otg_core_reset(core_if);
++		}
++	}
++
++	if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	    (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	    (core_if->core_params->ulpi_fs_ls)) {
++		DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
++		usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 1;
++		usbcfg.b.ulpi_clk_sus_m = 1;
++		DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++	} else {
++		usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 0;
++		usbcfg.b.ulpi_clk_sus_m = 0;
++		DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++	}
++
++	/* Program the GAHBCFG Register. */
++	switch (core_if->hwcfg2.b.architecture) {
++
++	case DWC_SLAVE_ONLY_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
++		ahbcfg.b.nptxfemplvl_txfemplvl =
++		    DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		core_if->dma_enable = 0;
++		core_if->dma_desc_enable = 0;
++		break;
++
++	case DWC_EXT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
++		{
++			uint8_t brst_sz = core_if->core_params->dma_burst_size;
++			ahbcfg.b.hburstlen = 0;
++			while (brst_sz > 1) {
++				ahbcfg.b.hburstlen++;
++				brst_sz >>= 1;
++			}
++		}
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable =
++		    (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	case DWC_INT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
++		/* Old value was DWC_GAHBCFG_INT_DMA_BURST_INCR - done for 
++		  Host mode ISOC in issue fix - vahrama */
++		/* Broadcom had altered to (1<<3)|(0<<0) - WRESP=1, max 4 beats */
++		ahbcfg.b.hburstlen = (1<<3)|(0<<0);//DWC_GAHBCFG_INT_DMA_BURST_INCR4;
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable =
++		    (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	}
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			DWC_PRINTF("Using Descriptor DMA mode\n");
++		} else {
++			DWC_PRINTF("Using Buffer DMA mode\n");
++
++		}
++	} else {
++		DWC_PRINTF("Using Slave mode\n");
++		core_if->dma_desc_enable = 0;
++	}
++
++	if (core_if->core_params->ahb_single) {
++		ahbcfg.b.ahbsingle = 1;
++	}
++	
++	ahbcfg.b.dmaenable = core_if->dma_enable;
++	DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32);
++
++	core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
++
++	core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
++	core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
++	DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n",
++		   ((core_if->pti_enh_enable) ? "enabled" : "disabled"));
++	DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n",
++		   ((core_if->multiproc_int_enable) ? "enabled" : "disabled"));
++
++	/*
++	 * Program the GUSBCFG register.
++	 */
++	usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++
++	switch (core_if->hwcfg2.b.op_mode) {
++	case DWC_MODE_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
++				   DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_SRP_ONLY_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++	}
++
++	DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	if (core_if->core_params->lpm_enable) {
++		glpmcfg_data_t lpmcfg = {.d32 = 0 };
++
++		/* To enable LPM support set lpm_cap_en bit */
++		lpmcfg.b.lpm_cap_en = 1;
++
++		/* Make AppL1Res ACK */
++		lpmcfg.b.appl_resp = 1;
++
++		/* Retry 3 times */
++		lpmcfg.b.retry_count = 3;
++
++		DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg,
++				 0, lpmcfg.d32);
++
++	}
++#endif
++	if (core_if->core_params->ic_usb_cap) {
++		gusbcfg_data_t gusbcfg = {.d32 = 0 };
++		gusbcfg.b.ic_usb_cap = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg,
++				 0, gusbcfg.d32);
++	}
++	{
++		gotgctl_data_t gotgctl = {.d32 = 0 };
++		gotgctl.b.otgver = core_if->core_params->otg_ver;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0,
++				 gotgctl.d32);
++		/* Set OTG version supported */
++		core_if->otg_ver = core_if->core_params->otg_ver;
++		DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n",
++			   core_if->core_params->otg_ver, core_if->otg_ver);
++	}
++	
++
++	/* Enable common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Do device or host intialization based on mode during PCD
++	 * and HCD initialization  */
++	if (dwc_otg_is_host_mode(core_if)) {
++		DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
++		core_if->op_state = A_HOST;
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
++		core_if->op_state = B_PERIPHERAL;
++#ifdef DWC_DEVICE_ONLY
++		dwc_otg_core_dev_init(core_if);
++#endif
++	}
++}
++
++/**
++ * This function enables the Device mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++	/* Disable all interrupts. */
++	DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts */
++	DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Enable interrupts */
++	intr_mask.b.usbreset = 1;
++	intr_mask.b.enumdone = 1;
++	/* Disable Disconnect interrupt in Device mode */
++	intr_mask.b.disconnect = 0;
++
++	if (!core_if->multiproc_int_enable) {
++		intr_mask.b.inepintr = 1;
++		intr_mask.b.outepintr = 1;
++	}
++
++	intr_mask.b.erlysuspend = 1;
++
++	if (core_if->en_multiple_tx_fifo == 0) {
++		intr_mask.b.epmismatch = 1;
++	}
++
++	//intr_mask.b.incomplisoout = 1;
++	intr_mask.b.incomplisoin = 1;
++	
++/* Enable the ignore frame number for ISOC xfers - MAS */
++/* Disable to support high bandwith ISOC transfers - manukz */
++#if 0
++#ifdef DWC_UTE_PER_IO
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			dctl_data_t dctl1 = {.d32 = 0 };
++			dctl1.b.ifrmnum = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, 0, dctl1.d32);
++			DWC_DEBUG("----Enabled Ignore frame number (0x%08x)",
++				  DWC_READ_REG32(&core_if->dev_if->
++						 dev_global_regs->dctl));
++		}
++	}
++#endif
++#endif
++#ifdef DWC_EN_ISOC
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable == 0) {
++			if (core_if->pti_enh_enable) {
++				dctl_data_t dctl = {.d32 = 0 };
++				dctl.b.ifrmnum = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 dev_if->dev_global_regs->dctl,
++						 0, dctl.d32);
++			} else {
++				intr_mask.b.incomplisoin = 1;
++				intr_mask.b.incomplisoout = 1;
++			}
++		}
++	} else {
++		intr_mask.b.incomplisoin = 1;
++		intr_mask.b.incomplisoout = 1;
++	}
++#endif /* DWC_EN_ISOC */
++
++	/** @todo NGS: Should this be a module parameter? */
++#ifdef USE_PERIODIC_EP
++	intr_mask.b.isooutdrop = 1;
++	intr_mask.b.eopframe = 1;
++	intr_mask.b.incomplisoin = 1;
++	intr_mask.b.incomplisoout = 1;
++#endif
++
++	DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++
++	DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
++		    DWC_READ_REG32(&global_regs->gintmsk));
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * device mode.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	dcfg_data_t dcfg = {.d32 = 0 };
++	depctl_data_t diepctl = {.d32 = 0 };
++	grstctl_t resetctl = {.d32 = 0 };
++	uint32_t rx_fifo_size;
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize;
++	dthrctl_data_t dthrctl;
++	fifosize_data_t ptxfifosize;
++	uint16_t rxfsiz, nptxfsiz;
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	hwcfg3_data_t hwcfg3 = {.d32 = 0 };
++
++	/* Restart the Phy Clock */
++	DWC_WRITE_REG32(core_if->pcgcctl, 0);
++
++	/* Device configuration register */
++	init_devspd(core_if);
++	dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
++	dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
++	/* Enable Device OUT NAK in case of DDMA mode*/
++	if (core_if->core_params->dev_out_nak) {
++		dcfg.b.endevoutnak = 1;		
++	}
++
++	if (core_if->core_params->cont_on_bna) {
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.b.encontonbna = 1;
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	}
++	
++
++	DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n",
++			    core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n",
++			    params->dev_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n",
++			    params->dev_nperio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++
++#ifdef DWC_UTE_CFI
++		core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz);
++		core_if->init_rxfsiz = params->dev_rx_fifo_size;
++#endif
++		rx_fifo_size = params->dev_rx_fifo_size;
++		DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size);
++
++		DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++
++		/** Set Periodic Tx FIFO Mask all bits 0 */
++		core_if->p_tx_msk = 0;
++
++		/** Set Tx FIFO Mask all bits 0 */
++		core_if->tx_msk = 0;
++
++		if (core_if->en_multiple_tx_fifo == 0) {
++			/* Non-periodic Tx FIFO */
++			DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++			nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++			DWC_WRITE_REG32(&global_regs->gnptxfsiz,
++					nptxfifosize.d32);
++
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++			/**@todo NGS: Fix Periodic FIFO Sizing! */
++			/*
++			 * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_perio_tx_fifo_size array and the FIFO size registers in
++			 * the dptxfsiz array run from 0 to 14.
++			 */
++			/** @todo Finish debug of this */
++			ptxfifosize.b.startaddr =
++			    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++			for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++				ptxfifosize.b.depth =
++				    params->dev_perio_tx_fifo_size[i];
++				DWC_DEBUGPL(DBG_CIL,
++					    "initial dtxfsiz[%d]=%08x\n", i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++				DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++						ptxfifosize.d32);
++				DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n",
++					    i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++				ptxfifosize.b.startaddr += ptxfifosize.b.depth;
++			}
++		} else {
++			/*
++			 * Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_tx_fifo_size array and the FIFO size registers in
++			 * the dtxfsiz array run from 0 to 14.
++			 */
++
++			/* Non-periodic Tx FIFO */
++			DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++#ifdef DWC_UTE_CFI
++			core_if->pwron_gnptxfsiz =
++			    (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
++			core_if->init_gnptxfsiz =
++			    params->dev_nperio_tx_fifo_size;
++#endif
++			nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++			DWC_WRITE_REG32(&global_regs->gnptxfsiz,
++					nptxfifosize.d32);
++
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++			txfifosize.b.startaddr =
++			    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++
++			for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++
++				txfifosize.b.depth =
++				    params->dev_tx_fifo_size[i];
++
++				DWC_DEBUGPL(DBG_CIL,
++					    "initial dtxfsiz[%d]=%08x\n",
++					    i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++
++#ifdef DWC_UTE_CFI
++				core_if->pwron_txfsiz[i] =
++				    (DWC_READ_REG32
++				     (&global_regs->dtxfsiz[i]) >> 16);
++				core_if->init_txfsiz[i] =
++				    params->dev_tx_fifo_size[i];
++#endif
++				DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++						txfifosize.d32);
++
++				DWC_DEBUGPL(DBG_CIL,
++					    "new dtxfsiz[%d]=%08x\n",
++					    i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++
++				txfifosize.b.startaddr += txfifosize.b.depth;
++			}
++			if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
++				/* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */
++				gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg);
++				hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3);
++				gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16);
++				DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
++				rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff);
++				nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
++				gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz;
++				DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
++			}
++		}
++
++		/* Flush the FIFOs */
++		dwc_otg_flush_tx_fifo(core_if, 0x10);	/* all Tx FIFOs */
++		dwc_otg_flush_rx_fifo(core_if);
++
++		/* Flush the Learning Queue. */
++		resetctl.b.intknqflsh = 1;
++		DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) {
++			core_if->start_predict = 0;
++			for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) {
++				core_if->nextep_seq[i] = 0xff;	// 0xff - EP not active
++			}
++			core_if->nextep_seq[0] = 0;
++			core_if->first_in_nextep_seq = 0;
++			diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
++			diepctl.b.nextep = 0;
++			DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++		
++			/* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */
++			dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++			dcfg.b.epmscnt = 2;
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++			DWC_DEBUGPL(DBG_CILV,"%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++				__func__, core_if->first_in_nextep_seq);
++			for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++				DWC_DEBUGPL(DBG_CILV, "%2d ", core_if->nextep_seq[i]);
++			}
++			DWC_DEBUGPL(DBG_CILV,"\n");
++		}
++	
++		/* Clear all pending Device Interrupts */
++		/** @todo - if the condition needed to be checked
++		 *  or in any case all pending interrutps should be cleared?
++	     */
++		if (core_if->multiproc_int_enable) {
++			for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++				DWC_WRITE_REG32(&dev_if->
++						dev_global_regs->diepeachintmsk[i], 0);
++			}
++		}
++
++		for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++			DWC_WRITE_REG32(&dev_if->
++					dev_global_regs->doepeachintmsk[i], 0);
++		}
++
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0);
++	} else {
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0);
++	}
++
++	for (i = 0; i <= dev_if->num_in_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		} else {
++			depctl.d32 = 0;
++		}
++
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0);
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
++	}
++
++	for (i = 0; i <= dev_if->num_out_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
++		if (depctl.b.epena) {
++			dctl_data_t dctl = {.d32 = 0 };
++			gintmsk_data_t gintsts = {.d32 = 0 };
++			doepint_data_t doepint = {.d32 = 0 };
++			dctl.b.sgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++			do {
++				dwc_udelay(10);
++				gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			} while (!gintsts.b.goutnakeff);
++			gintsts.d32 = 0;
++			gintsts.b.goutnakeff = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++			do {
++				dwc_udelay(10);
++				doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++					out_ep_regs[i]->doepint);
++			} while (!doepint.b.epdisabled);
++
++			doepint.b.epdisabled = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepint, doepint.d32);
++
++			dctl.d32 = 0;
++			dctl.b.cgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++		} else {
++			depctl.d32 = 0;
++		}
++
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0);
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
++	}
++
++	if (core_if->en_multiple_tx_fifo && core_if->dma_enable) {
++		dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
++		dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
++		dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
++
++		dev_if->rx_thr_length = params->rx_thr_length;
++		dev_if->tx_thr_length = params->tx_thr_length;
++
++		dev_if->setup_desc_index = 0;
++
++		dthrctl.d32 = 0;
++		dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
++		dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
++		dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
++		dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
++		dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
++		dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio;
++
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl,
++				dthrctl.d32);
++
++		DWC_DEBUGPL(DBG_CIL,
++			    "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
++			    dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en,
++			    dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len,
++			    dthrctl.b.rx_thr_len);
++
++	}
++
++	dwc_otg_enable_device_interrupts(core_if);
++
++	{
++		diepmsk_data_t msk = {.d32 = 0 };
++		msk.b.txfifoundrn = 1;
++		if (core_if->multiproc_int_enable) {
++			DWC_MODIFY_REG32(&dev_if->dev_global_regs->
++					 diepeachintmsk[0], msk.d32, msk.d32);
++		} else {
++			DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk,
++					 msk.d32, msk.d32);
++		}
++	}
++
++	if (core_if->multiproc_int_enable) {
++		/* Set NAK on Babble */
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.b.nakonbble = 1;
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	}
++
++	if (core_if->snpsid >= OTG_CORE_REV_2_94a) {
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dctl);
++		dctl.b.sftdiscon = 0;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, dctl.d32);
++	}
++}
++
++/**
++ * This function enables the Host mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if);
++
++	/* Disable all interrupts. */
++	DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts. */
++	DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/*
++	 * Enable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++
++	intr_mask.b.disconnect = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++
++	DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++}
++
++/**
++ * This function disables the Host Mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++
++	/*
++	 * Disable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++	intr_mask.b.ptxfempty = 1;
++	intr_mask.b.nptxfempty = 1;
++
++	DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0);
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * host mode.
++ *
++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ * request queues. Host channels are reset to ensure that they are ready for
++ * performing transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_host_if_t *host_if = core_if->host_if;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	hprt0_data_t hprt0 = {.d32 = 0 };
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t ptxfifosize;
++	uint16_t rxfsiz, nptxfsiz, hptxfsiz;
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	int i;
++	hcchar_data_t hcchar;
++	hcfg_data_t hcfg;
++	hfir_data_t hfir;
++	dwc_otg_hc_regs_t *hc_regs;
++	int num_channels;
++	gotgctl_data_t gotgctl = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if);
++
++	/* Restart the Phy Clock */
++	DWC_WRITE_REG32(core_if->pcgcctl, 0);
++
++	/* Initialize Host Configuration Register */
++	init_fslspclksel(core_if);
++	if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg);
++		hcfg.b.fslssupp = 1;
++		DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32);
++
++	}
++
++	/* This bit allows dynamic reloading of the HFIR register
++	 * during runtime. This bit needs to be programmed during 
++	 * initial configuration and its value must not be changed
++	 * during runtime.*/
++	if (core_if->core_params->reload_ctl == 1) {
++		hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir);
++		hfir.b.hfirrldctrl = 1;
++		DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32);
++	}
++
++	if (core_if->core_params->dma_desc_enable) {
++		uint8_t op_mode = core_if->hwcfg2.b.op_mode;
++		if (!
++		    (core_if->hwcfg4.b.desc_dma
++		     && (core_if->snpsid >= OTG_CORE_REV_2_90a)
++		     && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++			 || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
++			 || (op_mode ==
++			     DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG)
++			 || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)
++			 || (op_mode ==
++			     DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) {
++
++			DWC_ERROR("Host can't operate in Descriptor DMA mode.\n"
++				  "Either core version is below 2.90a or "
++				  "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n"
++				  "To run the driver in Buffer DMA host mode set dma_desc_enable "
++				  "module parameter to 0.\n");
++			return;
++		}
++		hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg);
++		hcfg.b.descdma = 1;
++		DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32);
++	}
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n",
++			    core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n",
++			    params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n",
++			    params->host_nperio_tx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n",
++			    params->host_perio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++		DWC_WRITE_REG32(&global_regs->grxfsiz,
++				params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++
++		/* Non-periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->gnptxfsiz));
++		nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
++		nptxfifosize.b.startaddr = params->host_rx_fifo_size;
++		DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++		/* Periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->hptxfsiz));
++		ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
++		ptxfifosize.b.startaddr =
++		    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++		DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->hptxfsiz));
++		
++		if (core_if->en_multiple_tx_fifo
++		    && core_if->snpsid <= OTG_CORE_REV_2_94a) {
++			/* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */
++			gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg);
++			rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff);
++			nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
++			hptxfsiz = (DWC_READ_REG32(&global_regs->hptxfsiz) >> 16);
++			gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz + hptxfsiz;
++			DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
++		}
++	}
++
++	/* TODO - check this */
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++	/* Make sure the FIFOs are flushed. */
++	dwc_otg_flush_tx_fifo(core_if, 0x10 /* all TX FIFOs */ );
++	dwc_otg_flush_rx_fifo(core_if);
++
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++
++	if (!core_if->core_params->dma_desc_enable) {
++		/* Flush out any leftover queued requests. */
++		num_channels = core_if->core_params->host_channels;
++
++		for (i = 0; i < num_channels; i++) {
++			hc_regs = core_if->host_if->hc_regs[i];
++			hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++			hcchar.b.chen = 0;
++			hcchar.b.chdis = 1;
++			hcchar.b.epdir = 0;
++			DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		}
++
++		/* Halt all channels to put them into a known state. */
++		for (i = 0; i < num_channels; i++) {
++			int count = 0;
++			hc_regs = core_if->host_if->hc_regs[i];
++			hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++			hcchar.b.chen = 1;
++			hcchar.b.chdis = 1;
++			hcchar.b.epdir = 0;
++			DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++			DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs);
++			do {
++				hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++				if (++count > 1000) {
++					DWC_ERROR
++					    ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n",
++					     __func__, i, hcchar.d32, &hc_regs->hcchar);
++					break;
++				}
++				dwc_udelay(1);
++			} while (hcchar.b.chen);
++		}
++	}
++
++	/* Turn on the vbus power. */
++	DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state);
++	if (core_if->op_state == A_HOST) {
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++		if (hprt0.b.prtpwr == 0) {
++			hprt0.b.prtpwr = 1;
++			DWC_WRITE_REG32(host_if->hprt0, hprt0.d32);
++		}
++	}
++
++	dwc_otg_enable_host_interrupts(core_if);
++}
++
++/**
++ * Prepares a host channel for transferring packets to/from a specific
++ * endpoint. The HCCHARn register is set up with the characteristics specified
++ * in _hc. Host channel interrupts that may need to be serviced while this
++ * transfer is in progress are enabled.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ * @param hc Information needed to initialize the host channel
++ */
++void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	uint32_t intr_enable;
++	hcintmsk_data_t hc_intr_mask;
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++
++	uint8_t hc_num = hc->hc_num;
++	dwc_otg_host_if_t *host_if = core_if->host_if;
++	dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
++
++	/* Clear old interrupt conditions for this host channel. */
++	hc_intr_mask.d32 = 0xFFFFFFFF;
++	hc_intr_mask.b.reserved14_31 = 0;
++	DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32);
++
++	/* Enable channel interrupts required for this transfer. */
++	hc_intr_mask.d32 = 0;
++	hc_intr_mask.b.chhltd = 1;
++	if (core_if->dma_enable) {
++		/* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */
++		if (!core_if->dma_desc_enable)
++			hc_intr_mask.b.ahberr = 1;
++		else {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++				hc_intr_mask.b.xfercompl = 1;
++		}
++
++		if (hc->error_state && !hc->do_split &&
++		    hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			hc_intr_mask.b.ack = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.datatglerr = 1;
++				if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++					hc_intr_mask.b.nak = 1;
++				}
++			}
++		}
++	} else {
++		switch (hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			} else {
++				hc_intr_mask.b.nak = 1;
++				hc_intr_mask.b.nyet = 1;
++				if (hc->do_ping) {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->do_split) {
++				hc_intr_mask.b.nak = 1;
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				} else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			break;
++		case DWC_OTG_EP_TYPE_INTR:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.nak = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			hc_intr_mask.b.frmovrun = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			}
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			if (hc->do_split) {
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				} else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++			break;
++		case DWC_OTG_EP_TYPE_ISOC:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.frmovrun = 1;
++			hc_intr_mask.b.ack = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.xacterr = 1;
++				hc_intr_mask.b.bblerr = 1;
++			}
++			break;
++		}
++	}
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++	/* Enable the top level host channel interrupt. */
++	intr_enable = (1 << hc_num);
++	DWC_MODIFY_REG32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
++
++	/* Make sure host channel interrupts are enabled. */
++	gintmsk.b.hcintr = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++
++	/*
++	 * Program the HCCHARn register with the endpoint characteristics for
++	 * the current transfer.
++	 */
++	hcchar.d32 = 0;
++	hcchar.b.devaddr = hc->dev_addr;
++	hcchar.b.epnum = hc->ep_num;
++	hcchar.b.epdir = hc->ep_is_in;
++	hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.eptype = hc->ep_type;
++	hcchar.b.mps = hc->max_packet;
++
++	DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d, Dev Addr %d, EP #%d\n",
++                    __func__, hc->hc_num, hcchar.b.devaddr, hcchar.b.epnum);
++	DWC_DEBUGPL(DBG_HCDV, "	 Is In %d, Is Low Speed %d, EP Type %d, "
++                                "Max Pkt %d, Multi Cnt %d\n",
++                    hcchar.b.epdir, hcchar.b.lspddev, hcchar.b.eptype,
++                    hcchar.b.mps, hcchar.b.multicnt);
++
++	/*
++	 * Program the HCSPLIT register for SPLITs
++	 */
++	hcsplt.d32 = 0;
++	if (hc->do_split) {
++		DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n",
++			    hc->hc_num,
++			    hc->complete_split ? "CSPLIT" : "SSPLIT");
++		hcsplt.b.compsplt = hc->complete_split;
++		hcsplt.b.xactpos = hc->xact_pos;
++		hcsplt.b.hubaddr = hc->hub_addr;
++		hcsplt.b.prtaddr = hc->port_addr;
++		DWC_DEBUGPL(DBG_HCDV, "\t  comp split %d\n", hc->complete_split);
++		DWC_DEBUGPL(DBG_HCDV, "\t  xact pos %d\n", hc->xact_pos);
++		DWC_DEBUGPL(DBG_HCDV, "\t  hub addr %d\n", hc->hub_addr);
++		DWC_DEBUGPL(DBG_HCDV, "\t  port addr %d\n", hc->port_addr);
++		DWC_DEBUGPL(DBG_HCDV, "\t  is_in %d\n", hc->ep_is_in);
++		DWC_DEBUGPL(DBG_HCDV, "\t  Max Pkt: %d\n", hcchar.b.mps);
++		DWC_DEBUGPL(DBG_HCDV, "\t  xferlen: %d\n", hc->xfer_len);
++	}
++	DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
++
++}
++
++/**
++ * Attempts to halt a host channel. This function should only be called in
++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ * normal circumstances in DMA mode, the controller halts the channel when the
++ * transfer is complete or a condition occurs that requires application
++ * intervention.
++ *
++ * In slave mode, checks for a free request queue entry, then sets the Channel
++ * Enable and Channel Disable bits of the Host Channel Characteristics
++ * register of the specified channel to intiate the halt. If there is no free
++ * request queue entry, sets only the Channel Disable bit of the HCCHARn
++ * register to flush requests for this channel. In the latter case, sets a
++ * flag to indicate that the host channel needs to be halted when a request
++ * queue slot is open.
++ *
++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ * HCCHARn register. The controller ensures there is space in the request
++ * queue before submitting the halt request.
++ *
++ * Some time may elapse before the core flushes any posted requests for this
++ * host channel and halts. The Channel Halted interrupt handler completes the
++ * deactivation of the host channel.
++ *
++ * @param core_if Controller register interface.
++ * @param hc Host channel to halt.
++ * @param halt_status Reason for halting the channel.
++ */
++void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if,
++		     dwc_hc_t * hc, dwc_otg_halt_status_e halt_status)
++{
++	gnptxsts_data_t nptxsts;
++	hptxsts_data_t hptxsts;
++	hcchar_data_t hcchar;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_core_global_regs_t *global_regs;
++	dwc_otg_host_global_regs_t *host_global_regs;
++
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	global_regs = core_if->core_global_regs;
++	host_global_regs = core_if->host_if->host_global_regs;
++
++	DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS),
++		   "halt_status = %d\n", halt_status);
++
++	if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Disable all channel interrupts except Ch Halted. The QTD
++		 * and QH state associated with this transfer has been cleared
++		 * (in the case of URB_DEQUEUE), so the channel needs to be
++		 * shut down carefully to prevent crashes.
++		 */
++		hcintmsk_data_t hcintmsk;
++		hcintmsk.d32 = 0;
++		hcintmsk.b.chhltd = 1;
++		DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32);
++
++		/*
++		 * Make sure no other interrupts besides halt are currently
++		 * pending. Handling another interrupt could cause a crash due
++		 * to the QTD and QH state.
++		 */
++		DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32);
++
++		/*
++		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++		 * even if the channel was already halted for some other
++		 * reason.
++		 */
++		hc->halt_status = halt_status;
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		if (hcchar.b.chen == 0) {
++			/*
++			 * The channel is either already halted or it hasn't
++			 * started yet. In DMA mode, the transfer may halt if
++			 * it finishes normally or a condition occurs that
++			 * requires driver intervention. Don't want to halt
++			 * the channel again. In either Slave or DMA mode,
++			 * it's possible that the transfer has been assigned
++			 * to a channel, but not started yet when an URB is
++			 * dequeued. Don't want to halt a channel that hasn't
++			 * started yet.
++			 */
++			return;
++		}
++	}
++	if (hc->halt_pending) {
++		/*
++		 * A halt has already been issued for this channel. This might
++		 * happen when a transfer is aborted by a higher level in
++		 * the stack.
++		 */
++#ifdef DEBUG
++		DWC_PRINTF
++		    ("*** %s: Channel %d, _hc->halt_pending already set ***\n",
++		     __func__, hc->hc_num);
++
++#endif
++		return;
++	}
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* No need to set the bit in DDMA for disabling the channel */
++	//TODO check it everywhere channel is disabled          
++	if (!core_if->core_params->dma_desc_enable)
++		hcchar.b.chen = 1;
++	hcchar.b.chdis = 1;
++
++	if (!core_if->dma_enable) {
++		/* Check for space in the request queue to issue the halt. */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++			if (nptxsts.b.nptxqspcavail == 0) {
++				hcchar.b.chen = 0;
++			}
++		} else {
++			hptxsts.d32 =
++			    DWC_READ_REG32(&host_global_regs->hptxsts);
++			if ((hptxsts.b.ptxqspcavail == 0)
++			    || (core_if->queuing_high_bandwidth)) {
++				hcchar.b.chen = 0;
++			}
++		}
++	}
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->halt_status = halt_status;
++
++	if (hcchar.b.chen) {
++		hc->halt_pending = 1;
++		hc->halt_on_queue = 0;
++	} else {
++		hc->halt_on_queue = 1;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 hcchar: 0x%08x\n", hcchar.d32);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_pending: %d\n", hc->halt_pending);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_on_queue: %d\n", hc->halt_on_queue);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_status: %d\n", hc->halt_status);
++
++	return;
++}
++
++/**
++ * Clears the transfer state for a host channel. This function is normally
++ * called after a transfer is done and the host channel is being released.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to clean up.
++ */
++void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	dwc_otg_hc_regs_t *hc_regs;
++
++	hc->xfer_started = 0;
++
++	/*
++	 * Clear channel interrupt enables and any unhandled channel interrupt
++	 * conditions.
++	 */
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0);
++	DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF);
++#ifdef DEBUG
++	DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]);
++#endif
++}
++
++/**
++ * Sets the channel property that indicates in which frame a periodic transfer
++ * should occur. This is always set to the _next_ frame. This function has no
++ * effect on non-periodic transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to set up and its properties.
++ * @param hcchar Current value of the HCCHAR register for the specified host
++ * channel.
++ */
++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if,
++					 dwc_hc_t * hc, hcchar_data_t * hcchar)
++{
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		hfnum_data_t hfnum;
++		hfnum.d32 =
++		    DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum);
++
++		/* 1 if _next_ frame is odd, 0 if it's even */
++		hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++#ifdef DEBUG
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split
++		    && !hc->complete_split) {
++			switch (hfnum.b.frnum & 0x7) {
++			case 7:
++				core_if->hfnum_7_samples++;
++				core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
++				break;
++			case 0:
++				core_if->hfnum_0_samples++;
++				core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
++				break;
++			default:
++				core_if->hfnum_other_samples++;
++				core_if->hfnum_other_frrem_accum +=
++				    hfnum.b.frrem;
++				break;
++			}
++		}
++#endif
++	}
++}
++
++#ifdef DEBUG
++void hc_xfer_timeout(void *ptr)
++{
++	hc_xfer_info_t *xfer_info = NULL;
++	int hc_num = 0;
++
++	if (ptr)
++		xfer_info = (hc_xfer_info_t *) ptr;
++
++	if (!xfer_info->hc) {
++		DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc);
++		return;
++	}
++
++	hc_num = xfer_info->hc->hc_num;
++	DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++	DWC_WARN("	start_hcchar_val 0x%08x\n",
++		 xfer_info->core_if->start_hcchar_val[hc_num]);
++}
++#endif
++
++void ep_xfer_timeout(void *ptr)
++{
++	ep_xfer_info_t *xfer_info = NULL;
++	int ep_num = 0;
++	dctl_data_t dctl = {.d32 = 0 };
++	gintsts_data_t gintsts = {.d32 = 0 };
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++	if (ptr)
++		xfer_info = (ep_xfer_info_t *) ptr;
++
++	if (!xfer_info->ep) {
++		DWC_ERROR("xfer_info->ep = %p\n", xfer_info->ep);
++		return;
++	}
++
++	ep_num = xfer_info->ep->num;
++	DWC_WARN("%s: timeout on endpoit %d\n", __func__, ep_num);
++	/* Put the sate to 2 as it was time outed */
++	xfer_info->state = 2;
++
++	dctl.d32 =
++	    DWC_READ_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl);
++	gintsts.d32 =
++	    DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintsts);
++	gintmsk.d32 =
++	    DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintmsk);
++
++	if (!gintmsk.b.goutnakeff) {
++		/* Unmask it */
++		gintmsk.b.goutnakeff = 1;
++		DWC_WRITE_REG32(&xfer_info->core_if->core_global_regs->gintmsk,
++				gintmsk.d32);
++
++	}
++
++	if (!gintsts.b.goutnakeff) {
++		dctl.b.sgoutnak = 1;
++	}
++	DWC_WRITE_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl,
++			dctl.d32);
++
++}
++
++void set_pid_isoc(dwc_hc_t * hc)
++{
++	/* Set up the initial PID for the transfer. */
++	if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++		if (hc->ep_is_in) {
++			if (hc->multi_count == 1) {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			} else if (hc->multi_count == 2) {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++			} else {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
++			}
++		} else {
++			if (hc->multi_count == 1) {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			} else {
++				hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
++			}
++		}
++	} else {
++		hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for a host channel and
++ * starts the transfer. May be called in either Slave mode or DMA mode. In
++ * Slave mode, the caller must ensure that there is sufficient space in the
++ * request queue and Tx Data FIFO.
++ *
++ * For an OUT transfer in Slave mode, it loads a data packet into the
++ * appropriate FIFO. If necessary, additional data packets will be loaded in
++ * the Host ISR.
++ *
++ * For an IN transfer in Slave mode, a data packet is requested. The data
++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ * additional data packets are requested in the Host ISR.
++ *
++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++ * register along with a packet count of 1 and the channel is enabled. This
++ * causes a single PING transaction to occur. Other fields in HCTSIZ are
++ * simply set to 0 since no data transfer occurs in this case.
++ *
++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ * all the information required to perform the subsequent data transfer. In
++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ * controller performs the entire PING protocol, then starts the data
++ * transfer.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Information needed to initialize the host channel. The xfer_len
++ * value may be reduced to accommodate the max widths of the XferSize and
++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ * to reflect the final xfer_len value.
++ */
++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	uint16_t num_packets;
++	uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
++	uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	hctsiz.d32 = 0;
++
++	if (hc->do_ping) {
++		if (!core_if->dma_enable) {
++			dwc_otg_hc_do_ping(core_if, hc);
++			hc->xfer_started = 1;
++			return;
++		} else {
++			hctsiz.b.dopng = 1;
++		}
++	}
++
++	if (hc->do_split) {
++		num_packets = 1;
++
++		if (hc->complete_split && !hc->ep_is_in) {
++			/* For CSPLIT OUT Transfer, set the size to 0 so the
++			 * core doesn't expect any data written to the FIFO */
++			hc->xfer_len = 0;
++		} else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
++			hc->xfer_len = hc->max_packet;
++		} else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
++			hc->xfer_len = 188;
++		}
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	} else {
++		/*
++		 * Ensure that the transfer length and packet count will fit
++		 * in the widths allocated for them in the HCTSIZn register.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure the transfer size is no larger than one
++			 * (micro)frame's worth of data. (A check was done
++			 * when the periodic transfer was accepted to ensure
++			 * that a (micro)frame's worth of data can be
++			 * programmed into a channel.)
++			 */
++			uint32_t max_periodic_len =
++			    hc->multi_count * hc->max_packet;
++			if (hc->xfer_len > max_periodic_len) {
++				hc->xfer_len = max_periodic_len;
++			} else {
++			}
++		} else if (hc->xfer_len > max_hc_xfer_size) {
++			/* Make sure that xfer_len is a multiple of max packet size. */
++			hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
++		}
++
++		if (hc->xfer_len > 0) {
++			num_packets =
++			    (hc->xfer_len + hc->max_packet -
++			     1) / hc->max_packet;
++			if (num_packets > max_hc_pkt_count) {
++				num_packets = max_hc_pkt_count;
++				hc->xfer_len = num_packets * hc->max_packet;
++			}
++		} else {
++			/* Need 1 packet for transfer length of 0. */
++			num_packets = 1;
++		}
++
++		if (hc->ep_is_in) {
++			/* Always program an integral # of max packets for IN transfers. */
++			hc->xfer_len = num_packets * hc->max_packet;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure that the multi_count field matches the
++			 * actual transfer length.
++			 */
++			hc->multi_count = num_packets;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++			set_pid_isoc(hc);
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	}
++
++	hc->start_pkt_count = num_packets;
++	hctsiz.b.pktcnt = num_packets;
++	hctsiz.b.pid = hc->data_pid_start;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Xfer Size: %d\n", hctsiz.b.xfersize);
++	DWC_DEBUGPL(DBG_HCDV, "	 Num Pkts: %d\n", hctsiz.b.pktcnt);
++	DWC_DEBUGPL(DBG_HCDV, "	 Start PID: %d\n", hctsiz.b.pid);
++
++	if (core_if->dma_enable) {
++		dwc_dma_t dma_addr;
++		if (hc->align_buff) {
++			dma_addr = hc->align_buff;
++		} else {
++			dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff);
++		}
++		DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr);
++	}
++
++	/* Start the split */
++	if (hc->do_split) {
++		hcsplt_data_t hcsplt;
++		hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++		hcsplt.b.spltena = 1;
++		DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32);
++	}
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.multicnt = hc->multi_count;
++	hc_set_even_odd_frame(core_if, hc, &hcchar);
++#ifdef DEBUG
++	core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, hc->hc_num, hcchar.d32);
++	}
++#endif
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->xfer_started = 1;
++	hc->requests++;
++
++	if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) {
++		/* Load OUT packet into the appropriate Tx FIFO. */
++		dwc_otg_hc_write_packet(core_if, hc);
++	}
++#ifdef DEBUG
++	if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++                DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n",
++                            hc->hc_num, core_if);//GRAYG
++		core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
++		core_if->hc_xfer_info[hc->hc_num].hc = hc;
++
++		/* Start a timer for this transfer. */
++		DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000);
++	}
++#endif
++}
++
++/**
++ * This function does the setup for a data transfer for a host channel
++ * and starts the transfer in Descriptor DMA mode.
++ *
++ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
++ * Sets PID and NTD values. For periodic transfers
++ * initializes SCHED_INFO field with micro-frame bitmap.
++ *
++ * Initializes HCDMA register with descriptor list address and CTD value
++ * then starts the transfer via enabling the channel.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Information needed to initialize the host channel.
++ */
++void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcdma_data_t hcdma;
++
++	hctsiz.d32 = 0;
++
++	if (hc->do_ping)
++		hctsiz.b_ddma.dopng = 1;
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++		set_pid_isoc(hc);
++
++	/* Packet Count and Xfer Size are not used in Descriptor DMA mode */
++	hctsiz.b_ddma.pid = hc->data_pid_start;
++	hctsiz.b_ddma.ntd = hc->ntd - 1;	/* 0 - 1 descriptor, 1 - 2 descriptors, etc. */
++	hctsiz.b_ddma.schinfo = hc->schinfo;	/* Non-zero only for high-speed interrupt endpoints */
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Start PID: %d\n", hctsiz.b.pid);
++	DWC_DEBUGPL(DBG_HCDV, "	 NTD: %d\n", hctsiz.b_ddma.ntd);
++
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcdma.d32 = 0;
++	hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11;
++
++	/* Always start from first descriptor. */
++	hcdma.b.ctd = 0;
++	DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32);
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.multicnt = hc->multi_count;
++
++#ifdef DEBUG
++	core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, hc->hc_num, hcchar.d32);
++	}
++#endif
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->xfer_started = 1;
++	hc->requests++;
++
++#ifdef DEBUG
++	if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR)
++	    && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) {
++                DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n",
++                            hc->hc_num, core_if);//GRAYG
++		core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
++		core_if->hc_xfer_info[hc->hc_num].hc = hc;
++		/* Start a timer for this transfer. */
++		DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000);
++	}
++#endif
++
++}
++
++/**
++ * This function continues a data transfer that was started by previous call
++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
++ * sufficient space in the request queue and Tx Data FIFO. This function
++ * should only be called in Slave mode. In DMA mode, the controller acts
++ * autonomously to complete transfers programmed to a host channel.
++ *
++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
++ * if there is any data remaining to be queued. For an IN transfer, another
++ * data packet is always requested. For the SETUP phase of a control transfer,
++ * this function does nothing.
++ *
++ * @return 1 if a new request is queued, 0 if no more requests are required
++ * for this transfer.
++ */
++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	if (hc->do_split) {
++		/* SPLITs always queue just once per channel */
++		return 0;
++	} else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		/* SETUPs are queued only once since they can't be NAKed. */
++		return 0;
++	} else if (hc->ep_is_in) {
++		/*
++		 * Always queue another request for other IN transfers. If
++		 * back-to-back INs are issued and NAKs are received for both,
++		 * the driver may still be processing the first NAK when the
++		 * second NAK is received. When the interrupt handler clears
++		 * the NAK interrupt for the first NAK, the second NAK will
++		 * not be seen. So we can't depend on the NAK interrupt
++		 * handler to requeue a NAKed request. Instead, IN requests
++		 * are issued each time this function is called. When the
++		 * transfer completes, the extra requests for the channel will
++		 * be flushed.
++		 */
++		hcchar_data_t hcchar;
++		dwc_otg_hc_regs_t *hc_regs =
++		    core_if->host_if->hc_regs[hc->hc_num];
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		hc_set_even_odd_frame(core_if, hc, &hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 0;
++		DWC_DEBUGPL(DBG_HCDV, "	 IN xfer: hcchar = 0x%08x\n",
++			    hcchar.d32);
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		hc->requests++;
++		return 1;
++	} else {
++		/* OUT transfers. */
++		if (hc->xfer_count < hc->xfer_len) {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				hcchar_data_t hcchar;
++				dwc_otg_hc_regs_t *hc_regs;
++				hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++				hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++				hc_set_even_odd_frame(core_if, hc, &hcchar);
++			}
++
++			/* Load OUT packet into the appropriate Tx FIFO. */
++			dwc_otg_hc_write_packet(core_if, hc);
++			hc->requests++;
++			return 1;
++		} else {
++			return 0;
++		}
++	}
++}
++
++/**
++ * Starts a PING transfer. This function should only be called in Slave mode.
++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
++ */
++void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	hctsiz.d32 = 0;
++	hctsiz.b.dopng = 1;
++	hctsiz.b.pktcnt = 1;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*
++ * This function writes a packet into the Tx FIFO associated with the Host
++ * Channel. For a channel associated with a non-periodic EP, the non-periodic
++ * Tx FIFO is written. For a channel associated with a periodic EP, the
++ * periodic Tx FIFO is written. This function should only be called in Slave
++ * mode.
++ *
++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ * then number of bytes written to the Tx FIFO.
++ */
++void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	uint32_t i;
++	uint32_t remaining_count;
++	uint32_t byte_count;
++	uint32_t dword_count;
++
++	uint32_t *data_buff = (uint32_t *) (hc->xfer_buff);
++	uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
++
++	remaining_count = hc->xfer_len - hc->xfer_count;
++	if (remaining_count > hc->max_packet) {
++		byte_count = hc->max_packet;
++	} else {
++		byte_count = remaining_count;
++	}
++
++	dword_count = (byte_count + 3) / 4;
++
++	if ((((unsigned long)data_buff) & 0x3) == 0) {
++		/* xfer_buff is DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			DWC_WRITE_REG32(data_fifo, *data_buff);
++		}
++	} else {
++		/* xfer_buff is not DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			uint32_t data;
++			data =
++			    (data_buff[0] | data_buff[1] << 8 | data_buff[2] <<
++			     16 | data_buff[3] << 24);
++			DWC_WRITE_REG32(data_fifo, data);
++		}
++	}
++
++	hc->xfer_count += byte_count;
++	hc->xfer_buff += byte_count;
++}
++
++/**
++ * Gets the current USB frame number. This is the frame number from the last
++ * SOF packet.
++ */
++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/* read current frame/microframe number from DSTS register */
++	return dsts.b.soffn;
++}
++
++/**
++ * Calculates and gets the frame Interval value of HFIR register according PHY 
++ * type and speed.The application can modify a value of HFIR register only after
++ * the Port Enable bit of the Host Port Control and Status register 
++ * (HPRT.PrtEnaPort) has been set.
++*/
++
++uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if)
++{
++	gusbcfg_data_t usbcfg;
++	hwcfg2_data_t hwcfg2;
++	hprt0_data_t hprt0;
++	int clock = 60;		// default value
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2);
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif)
++		clock = 60;
++	if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3)
++		clock = 48;
++	if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
++	    !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif)
++		clock = 30;
++	if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
++	    !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif)
++		clock = 60;
++	if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
++	    !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif)
++		clock = 48;
++	if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2)
++		clock = 48;
++	if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1)
++		clock = 48;
++	if (hprt0.b.prtspd == 0)
++		/* High speed case */
++		return 125 * clock;
++	else
++		/* FS/LS case */
++		return 1000 * clock;
++}
++
++/**
++ * This function reads a setup packet from the Rx FIFO into the destination
++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
++ * Interrupt routine when a SETUP packet has been received in Slave mode.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest Destination buffer for packet data.
++ */
++void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest)
++{
++	device_grxsts_data_t status;
++	/* Get the 8 bytes of a setup transaction data */
++
++	/* Pop 2 DWORDS off the receive data FIFO into memory */
++	dest[0] = DWC_READ_REG32(core_if->data_fifo[0]);
++	dest[1] = DWC_READ_REG32(core_if->data_fifo[0]);
++	if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++		status.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->grxstsp);
++		DWC_DEBUGPL(DBG_ANY,
++			    "EP:%d BCnt:%d " "pktsts:%x Frame:%d(0x%0x)\n",
++			    status.b.epnum, status.b.bcnt, status.b.pktsts,
++			    status.b.fn, status.b.fn);
++	}
++}
++
++/**
++ * This function enables EP0 OUT to receive SETUP packets and configures EP0
++ * IN for transmitting packets. It is normally called when the
++ * "Enumeration Done" interrupt occurs.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dsts_data_t dsts;
++	depctl_data_t diepctl;
++	depctl_data_t doepctl;
++	dctl_data_t dctl = {.d32 = 0 };
++
++	ep->stp_rollover = 0;
++	/* Read the Device Status and Endpoint 0 Control registers */
++	dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts);
++	diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
++	doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl);
++
++	/* Set the MPS of the IN EP based on the enumeration speed */
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_64;
++		break;
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_8;
++		break;
++	}
++
++	DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++	/* Enable OUT EP for receive */
++	if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
++	doepctl.b.epena = 1;
++	DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++	}
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++	dctl.b.cgnpinnak = 1;
++
++	DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++	DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n",
++		    DWC_READ_REG32(&dev_if->dev_global_regs->dctl));
++
++}
++
++/**
++ * This function activates an EP.  The Device EP control register for
++ * the EP is configured as defined in the ep structure. Note: This
++ * function is not used for EP0.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to activate.
++ */
++void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t depctl;
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = {.d32 = 0 };
++	dcfg_data_t dcfg;
++	uint8_t i;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
++		    (ep->is_in ? "IN" : "OUT"));
++
++#ifdef DWC_UTE_PER_IO
++	ep->xiso_frame_num = 0xFFFFFFFF;
++	ep->xiso_active_xfers = 0;
++	ep->xiso_queued_xfers = 0;
++#endif
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1 << ep->num;
++	} else {
++		addr = &dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1 << ep->num;
++	}
++
++	/* If the EP is already active don't change the EP Control
++	 * register. */
++	depctl.d32 = DWC_READ_REG32(addr);
++	if (!depctl.b.usbactep) {
++		depctl.b.mps = ep->maxpacket;
++		depctl.b.eptype = ep->type;
++		depctl.b.txfnum = ep->tx_fifo_num;
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			depctl.b.setd0pid = 1;	// ???
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++		depctl.b.usbactep = 1;
++
++		/* Update nextep_seq array and EPMSCNT in DCFG*/
++		if (!(depctl.b.eptype & 1) && (ep->is_in == 1)) {	// NP IN EP
++			for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++				if (core_if->nextep_seq[i] == core_if->first_in_nextep_seq)
++				break;
++			}
++			core_if->nextep_seq[i] = ep->num;	
++			core_if->nextep_seq[ep->num] = core_if->first_in_nextep_seq;
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++			dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++			dcfg.b.epmscnt++;
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++			DWC_DEBUGPL(DBG_PCDV,
++				    "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++				__func__, core_if->first_in_nextep_seq);
++			for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++				DWC_DEBUGPL(DBG_PCDV, "%2d\n",
++					    core_if->nextep_seq[i]);
++			}
++
++		}
++
++
++		DWC_WRITE_REG32(addr, depctl.d32);
++		DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr));
++	}
++
++	/* Enable the Interrupt for this EP */
++	if (core_if->multiproc_int_enable) {
++		if (ep->is_in == 1) {
++			diepmsk_data_t diepmsk = {.d32 = 0 };
++			diepmsk.b.xfercompl = 1;
++			diepmsk.b.timeout = 1;
++			diepmsk.b.epdisabled = 1;
++			diepmsk.b.ahberr = 1;
++			diepmsk.b.intknepmis = 1;
++			if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
++				diepmsk.b.intknepmis = 0; 
++			diepmsk.b.txfifoundrn = 1;	//?????
++			if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++				diepmsk.b.nak = 1;
++			}
++
++			
++			
++/*
++			if (core_if->dma_desc_enable) {
++				diepmsk.b.bna = 1;
++			}
++*/
++/*			
++			if (core_if->dma_enable) {
++				doepmsk.b.nak = 1;
++			}
++*/
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->
++					diepeachintmsk[ep->num], diepmsk.d32);
++
++		} else {
++			doepmsk_data_t doepmsk = {.d32 = 0 };
++			doepmsk.b.xfercompl = 1;
++			doepmsk.b.ahberr = 1;
++			doepmsk.b.epdisabled = 1;
++			if (ep->type == DWC_OTG_EP_TYPE_ISOC)
++				doepmsk.b.outtknepdis = 1;
++
++/*			
++
++			if (core_if->dma_desc_enable) {
++				doepmsk.b.bna = 1;
++			}
++*/
++/*			
++			doepmsk.b.babble = 1;
++			doepmsk.b.nyet = 1;
++			doepmsk.b.nak = 1;
++*/
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->
++					doepeachintmsk[ep->num], doepmsk.d32);
++		}
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk,
++				 0, daintmsk.d32);
++	} else {
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			if (ep->is_in) {
++				diepmsk_data_t diepmsk = {.d32 = 0 };
++				diepmsk.b.nak = 1;
++				DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
++			} else {
++				doepmsk_data_t doepmsk = {.d32 = 0 };
++				doepmsk.b.outtknepdis = 1;
++				DWC_MODIFY_REG32(&dev_if->dev_global_regs->doepmsk, 0, doepmsk.d32);
++			}
++		}
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk,
++				 0, daintmsk.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n",
++		    DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk));
++
++	ep->stall_clear_flag = 0;
++
++	return;
++}
++
++/**
++ * This function deactivates an EP. This is done by clearing the USB Active
++ * EP bit in the Device EP control register. Note: This function is not used
++ * for EP0. EP0 cannot be deactivated.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to deactivate.
++ */
++void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = {.d32 = 0 };
++	dcfg_data_t dcfg;
++	uint8_t i = 0;
++
++#ifdef DWC_UTE_PER_IO
++	ep->xiso_frame_num = 0xFFFFFFFF;
++	ep->xiso_active_xfers = 0;
++	ep->xiso_queued_xfers = 0;
++#endif
++
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1 << ep->num;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1 << ep->num;
++	}
++
++	depctl.d32 = DWC_READ_REG32(addr);
++
++	depctl.b.usbactep = 0;
++	
++	/* Update nextep_seq array and EPMSCNT in DCFG*/
++	if (!(depctl.b.eptype & 1) && ep->is_in == 1) {	// NP EP IN
++		for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			if (core_if->nextep_seq[i] == ep->num)
++			break;
++		}
++		core_if->nextep_seq[i] = core_if->nextep_seq[ep->num];	
++		if (core_if->first_in_nextep_seq == ep->num)
++			core_if->first_in_nextep_seq = i;
++		core_if->nextep_seq[ep->num] = 0xff;
++		depctl.b.nextep = 0;
++		dcfg.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++		dcfg.b.epmscnt--;
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
++				dcfg.d32);
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++				__func__, core_if->first_in_nextep_seq);
++			for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++				DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]);
++			}
++	}
++		
++	if (ep->is_in == 1)
++		depctl.b.txfnum = 0;
++
++	if (core_if->dma_desc_enable)
++		depctl.b.epdis = 1;
++
++	DWC_WRITE_REG32(addr, depctl.d32);
++	depctl.d32 = DWC_READ_REG32(addr);
++	if (core_if->dma_enable && ep->type == DWC_OTG_EP_TYPE_ISOC
++	    && depctl.b.epena) {
++		depctl_data_t depctl = {.d32 = 0};
++		if (ep->is_in) {
++			diepint_data_t diepint = {.d32 = 0};
++			
++			depctl.b.snak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepctl, depctl.d32);
++			do {
++				dwc_udelay(10);
++				diepint.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->in_ep_regs[ep->num]->
++						   diepint);
++			} while (!diepint.b.inepnakeff); 
++			diepint.b.inepnakeff = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepint, diepint.d32);
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepctl, depctl.d32);
++			do {
++				dwc_udelay(10);
++				diepint.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->in_ep_regs[ep->num]->
++						   diepint);
++			} while (!diepint.b.epdisabled); 
++			diepint.b.epdisabled = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepint, diepint.d32);
++		} else {
++			dctl_data_t dctl = {.d32 = 0};
++			gintmsk_data_t gintsts = {.d32 = 0};
++			doepint_data_t doepint = {.d32 = 0};
++			dctl.b.sgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, 0, dctl.d32);
++			do {
++				dwc_udelay(10);
++				gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			} while (!gintsts.b.goutnakeff); 
++			gintsts.d32 = 0;
++			gintsts.b.goutnakeff = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl, depctl.d32);
++			do 
++			{
++				dwc_udelay(10);
++				doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++											out_ep_regs[ep->num]->doepint);
++			} while (!doepint.b.epdisabled); 
++
++			doepint.b.epdisabled = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, doepint.d32);
++
++			dctl.d32 = 0;
++			dctl.b.cgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++		}		
++	}
++
++	/* Disable the Interrupt for this EP */
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk,
++				 daintmsk.d32, 0);
++
++		if (ep->is_in == 1) {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					diepeachintmsk[ep->num], 0);
++		} else {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					doepeachintmsk[ep->num], 0);
++		}
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk,
++				 daintmsk.d32, 0);
++	}
++
++}
++
++/**
++ * This function initializes dma descriptor chain.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	uint32_t offset;
++	uint32_t xfer_est;
++	int i;
++	unsigned maxxfer_local, total_len;
++	
++	if (!ep->is_in && ep->type == DWC_OTG_EP_TYPE_INTR && 
++					(ep->maxpacket%4)) {
++		maxxfer_local = ep->maxpacket;
++		total_len = ep->xfer_len;
++	} else {
++		maxxfer_local = ep->maxxfer;
++		total_len = ep->total_len;
++	}
++
++	ep->desc_cnt = (total_len / maxxfer_local) +
++            ((total_len % maxxfer_local) ? 1 : 0);
++
++	if (!ep->desc_cnt)
++		ep->desc_cnt = 1;
++
++	if (ep->desc_cnt > MAX_DMA_DESC_CNT)
++		ep->desc_cnt = MAX_DMA_DESC_CNT;
++
++	dma_desc = ep->desc_addr;
++	if (maxxfer_local == ep->maxpacket) {
++		if ((total_len % maxxfer_local) &&
++				(total_len/maxxfer_local < MAX_DMA_DESC_CNT)) {
++			xfer_est = (ep->desc_cnt - 1) * maxxfer_local +
++					(total_len % maxxfer_local);
++		} else
++			xfer_est = ep->desc_cnt * maxxfer_local;
++	} else
++		xfer_est = total_len;
++	offset = 0;
++	for (i = 0; i < ep->desc_cnt; ++i) {
++		/** DMA Descriptor Setup */
++		if (xfer_est > maxxfer_local) {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 0;
++			dma_desc->status.b.ioc = 0;
++			dma_desc->status.b.sp = 0;
++			dma_desc->status.b.bytes = maxxfer_local;
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			xfer_est -= maxxfer_local;
++			offset += maxxfer_local;
++		} else {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			if (ep->is_in) {
++				dma_desc->status.b.sp =
++				    (xfer_est %
++				     ep->maxpacket) ? 1 : ((ep->
++							    sent_zlp) ? 1 : 0);
++				dma_desc->status.b.bytes = xfer_est;
++			} else {
++				if (maxxfer_local == ep->maxpacket)
++					dma_desc->status.b.bytes = xfer_est;
++				else	
++					dma_desc->status.b.bytes =
++				    		xfer_est + ((4 - (xfer_est & 0x3)) & 0x3);
++			}
++
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++		}
++		dma_desc++;
++	}
++}
++/**
++ * This function is called when to write ISOC data into appropriate dedicated 
++ * periodic FIFO.
++ */
++static int32_t write_isoc_tx_fifo(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0 };
++	uint32_t len = 0;
++	int epnum = dwc_ep->num;
++	int dwords;
++
++	DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = dwc_ep->xfer_len - dwc_ep->xfer_count;
++
++	if (len > dwc_ep->maxpacket) {
++		len = dwc_ep->maxpacket;
++	}
++
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
++
++	while (txstatus.b.txfspcavail > dwords &&
++	       dwc_ep->xfer_count < dwc_ep->xfer_len && dwc_ep->xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, dwc_ep, 0);
++
++		len = dwc_ep->xfer_len - dwc_ep->xfer_count;
++		if (len > dwc_ep->maxpacket) {
++			len = dwc_ep->maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 =
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum,
++			    txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum,
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts));
++
++	return 1;
++}
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++		    "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n",
++		    ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len,
++		    ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff,
++		    ep->total_len);
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[ep->num];
++
++		gnptxsts_data_t gtxstatus;
++
++		gtxstatus.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
++
++		if (core_if->en_multiple_tx_fifo == 0
++		    && gtxstatus.b.nptxqspcavail == 0 && !core_if->dma_enable) {
++#ifdef DEBUG
++			DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32);
++#endif
++			return;
++		}
++
++		depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz));
++
++		if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT)
++			ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++		    		ep->maxxfer : (ep->total_len - ep->xfer_len);
++		else 
++			ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len - ep->xfer_len)) ?
++				 MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len);
++
++
++		/* Zero Length Packet? */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		} else {
++			/* Program the transfer size and packet count
++			 *      as follows: xfersize = N * maxpacket +
++			 *      short_packet pktcnt = N + (short_packet
++			 *      exist ? 1 : 0) 
++			 */
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len - ep->xfer_count - 1 +
++			     ep->maxpacket) / ep->maxpacket;
++			if (deptsiz.b.pktcnt > MAX_PKT_CNT) {
++				deptsiz.b.pktcnt = MAX_PKT_CNT;
++				deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++			} 
++			if (ep->type == DWC_OTG_EP_TYPE_ISOC) 
++				deptsiz.b.mc = deptsiz.b.pktcnt;
++		}
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				if (ep->type != DWC_OTG_EP_TYPE_ISOC)
++					deptsiz.b.mc = 1;
++				DWC_WRITE_REG32(&in_regs->dieptsiz,
++						deptsiz.d32);
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++#ifdef DWC_UTE_CFI
++				/* The descriptor chain should be already initialized by now */
++				if (ep->buff_mode != BM_STANDARD) {
++					DWC_WRITE_REG32(&in_regs->diepdma,
++							ep->descs_dma_addr);
++				} else {
++#endif
++					init_dma_desc_chain(core_if, ep);
++				/** DIEPDMAn Register write */
++					DWC_WRITE_REG32(&in_regs->diepdma,
++							ep->dma_desc_addr);
++#ifdef DWC_UTE_CFI
++				}
++#endif
++			}
++		} else {
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++			if (ep->type != DWC_OTG_EP_TYPE_ISOC) {
++				/**
++				 * Enable the Non-Periodic Tx FIFO empty interrupt,
++				 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++				 * the data will be written into the fifo by the ISR.
++				 */
++				if (core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					DWC_MODIFY_REG32
++					    (&core_if->core_global_regs->gintmsk,
++					     intr_mask.d32, intr_mask.d32);
++				} else {
++					/* Enable the Tx FIFO Empty Interrupt for this EP */
++					if (ep->xfer_len > 0) {
++						uint32_t fifoemptymsk = 0;
++						fifoemptymsk = 1 << ep->num;
++						DWC_MODIFY_REG32
++						    (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						     0, fifoemptymsk);
++
++					}
++				}
++			}  else {
++					 write_isoc_tx_fifo(core_if, ep);
++			}
++		}
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			dsts_data_t dsts = {.d32 = 0};
++			if (ep->bInterval == 1) {
++				dsts.d32 =
++				    DWC_READ_REG32(&core_if->dev_if->
++						   dev_global_regs->dsts);
++				ep->frame_num = dsts.b.soffn + ep->bInterval;
++				if (ep->frame_num > 0x3FFF) {
++					ep->frm_overrun = 1;
++					ep->frame_num &= 0x3FFF;
++				} else 
++					ep->frm_overrun = 0;
++				if (ep->frame_num & 0x1) {
++					depctl.b.setd1pid = 1;
++				} else {
++					depctl.b.setd0pid = 1;
++				}
++			}
++		}
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++	} else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz));
++
++		if (!core_if->dma_desc_enable) {	
++			if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT)
++				ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++                        	ep->maxxfer : (ep->total_len - ep->xfer_len);
++                else
++					ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len 
++					- ep->xfer_len)) ? MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len);
++		}
++
++		/* Program the transfer size and packet count as follows:
++		 *
++		 *      pktcnt = N                                                                                
++		 *      xfersize = N * maxpacket
++		 */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			/* Zero Length Packet */
++			deptsiz.b.xfersize = ep->maxpacket;
++			deptsiz.b.pktcnt = 1;
++		} else {
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len - ep->xfer_count +
++			     (ep->maxpacket - 1)) / ep->maxpacket;
++			if (deptsiz.b.pktcnt > MAX_PKT_CNT) {
++				deptsiz.b.pktcnt = MAX_PKT_CNT;
++			}
++			if (!core_if->dma_desc_enable) {
++				ep->xfer_len =
++			    		deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
++			}
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++		}
++
++		DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
++			    ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				DWC_WRITE_REG32(&out_regs->doeptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++#ifdef DWC_UTE_CFI
++				/* The descriptor chain should be already initialized by now */
++				if (ep->buff_mode != BM_STANDARD) {
++					DWC_WRITE_REG32(&out_regs->doepdma,
++							ep->descs_dma_addr);
++				} else {
++#endif
++					/** This is used for interrupt out transfers*/
++					if (!ep->xfer_len)
++						ep->xfer_len = ep->total_len;
++					init_dma_desc_chain(core_if, ep);
++
++					if (core_if->core_params->dev_out_nak) {
++						if (ep->type == DWC_OTG_EP_TYPE_BULK) {
++							deptsiz.b.pktcnt = (ep->total_len +
++								(ep->maxpacket - 1)) / ep->maxpacket;
++							deptsiz.b.xfersize = ep->total_len;
++							/* Remember initial value of doeptsiz */
++							core_if->start_doeptsiz_val[ep->num] = deptsiz.d32;
++							DWC_WRITE_REG32(&out_regs->doeptsiz,
++								deptsiz.d32);													
++						}
++					}
++				/** DOEPDMAn Register write */
++					DWC_WRITE_REG32(&out_regs->doepdma,
++							ep->dma_desc_addr);
++#ifdef DWC_UTE_CFI
++				}
++#endif
++			}
++		} else {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			dsts_data_t dsts = {.d32 = 0};
++			if (ep->bInterval == 1) {
++				dsts.d32 =
++				    DWC_READ_REG32(&core_if->dev_if->
++						   dev_global_regs->dsts);
++				ep->frame_num = dsts.b.soffn + ep->bInterval;
++				if (ep->frame_num > 0x3FFF) {
++					ep->frm_overrun = 1;
++					ep->frame_num &= 0x3FFF;
++				} else 
++					ep->frm_overrun = 0;
++
++				if (ep->frame_num & 0x1) {
++					depctl.b.setd1pid = 1;
++				} else {
++					depctl.b.setd0pid = 1;
++				}
++			}
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
++
++		DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
++			    DWC_READ_REG32(&out_regs->doepctl),
++			    DWC_READ_REG32(&out_regs->doeptsiz));
++		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++			    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->
++					   daintmsk),
++			    DWC_READ_REG32(&core_if->core_global_regs->
++					   gintmsk));
++
++		/* Timer is scheduling only for out bulk transfers for 
++		 * "Device DDMA OUT NAK Enhancement" feature to inform user 
++		 * about received data payload in case of timeout 
++		 */
++		if (core_if->core_params->dev_out_nak) {
++			if (ep->type == DWC_OTG_EP_TYPE_BULK) {
++				core_if->ep_xfer_info[ep->num].core_if = core_if;
++				core_if->ep_xfer_info[ep->num].ep = ep;
++				core_if->ep_xfer_info[ep->num].state = 1;
++
++				/* Start a timer for this transfer. */
++				DWC_TIMER_SCHEDULE(core_if->ep_xfer_timer[ep->num], 10000);
++			}
++		}
++	}
++}
++
++/**
++ * This function setup a zero length transfer in Buffer DMA and
++ * Slave modes for usb requests with zero field set
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++
++	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++	DWC_PRINTF("zero length transfer is called\n");
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[ep->num];
++
++		depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz));
++
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 1;
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				deptsiz.b.mc = 1;
++				DWC_WRITE_REG32(&in_regs->dieptsiz,
++						deptsiz.d32);
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++			/**
++			 * Enable the Non-Periodic Tx FIFO empty interrupt,
++			 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++			 * the data will be written into the fifo by the ISR.
++			 */
++			if (core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gintmsk,
++						 intr_mask.d32, intr_mask.d32);
++			} else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if (ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk = 1 << ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 0, fifoemptymsk);
++				}
++			}
++		}
++
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++	} else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz));
++
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				DWC_WRITE_REG32(&out_regs->doeptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for EP0 and starts
++ * the transfer.  For an IN transfer, the packets will be loaded into
++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
++ * unloaded from the Rx FIFO in the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_dev_dma_desc_t *dma_desc;
++
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++		    "xfer_buff=%p start_xfer_buff=%p \n",
++		    ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len,
++		    ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
++
++	ep->total_len = ep->xfer_len;
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[0];
++
++		gnptxsts_data_t gtxstatus;
++
++		if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++			depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
++			if (depctl.b.epena)
++				return;
++		}
++
++		gtxstatus.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
++
++		/* If dedicated FIFO every time flush fifo before enable ep*/
++		if (core_if->en_multiple_tx_fifo && core_if->snpsid >= OTG_CORE_REV_3_00a)
++			dwc_otg_flush_tx_fifo(core_if, ep->tx_fifo_num);
++
++		if (core_if->en_multiple_tx_fifo == 0
++		    && gtxstatus.b.nptxqspcavail == 0
++		    && !core_if->dma_enable) {
++#ifdef DEBUG
++			deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
++			DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n",
++				    DWC_READ_REG32(&in_regs->diepctl));
++			DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
++				    deptsiz.d32,
++				    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n",
++				   gtxstatus.d32);
++#endif
++			return;
++		}
++
++		depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
++		deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
++
++		/* Zero Length Packet? */
++		if (ep->xfer_len == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		} else {
++			/* Program the transfer size and packet count
++			 *      as follows: xfersize = N * maxpacket +
++			 *      short_packet pktcnt = N + (short_packet
++			 *      exist ? 1 : 0) 
++			 */
++			if (ep->xfer_len > ep->maxpacket) {
++				ep->xfer_len = ep->maxpacket;
++				deptsiz.b.xfersize = ep->maxpacket;
++			} else {
++				deptsiz.b.xfersize = ep->xfer_len;
++			}
++			deptsiz.b.pktcnt = 1;
++
++		}
++		DWC_DEBUGPL(DBG_PCDV,
++			    "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
++			    deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				DWC_WRITE_REG32(&in_regs->dieptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++				dma_desc = core_if->dev_if->in_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.sp =
++				    (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++				dma_desc->status.b.bytes = ep->xfer_len;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.sts = 0;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++				/** DIEPDMA0 Register write */
++				DWC_WRITE_REG32(&in_regs->diepdma,
++						core_if->
++						dev_if->dma_in_desc_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++		}
++
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if (core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gintmsk,
++						 intr_mask.d32, intr_mask.d32);
++			} else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if (ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 0, fifoemptymsk);
++				}
++			}
++		}
++	} else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[0];
++
++		depctl.d32 = DWC_READ_REG32(&out_regs->doepctl);
++		deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count as follows:
++		 *      xfersize = N * (maxpacket + 4 - (maxpacket % 4))
++		 *      pktcnt = N                                                                                      */
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++		if (core_if->snpsid >= OTG_CORE_REV_3_00a)
++			deptsiz.b.supcnt = 3;
++
++		DWC_DEBUGPL(DBG_PCDV, "len=%d  xfersize=%d pktcnt=%d\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				DWC_WRITE_REG32(&out_regs->doeptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++				dma_desc = core_if->dev_if->out_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++					dma_desc->status.b.mtrf = 0;
++					dma_desc->status.b.sr = 0;
++				}
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.bytes = ep->maxpacket;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.sts = 0;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++				/** DOEPDMA0 Register write */
++				DWC_WRITE_REG32(&out_regs->doepdma,
++						core_if->dev_if->
++						dma_out_desc_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32);
++	}
++}
++
++/**
++ * This function continues control IN transfers started by
++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
++ * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
++ * bit for the packet count.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_dev_dma_desc_t *dma_desc;
++
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[0];
++		gnptxsts_data_t tx_status = {.d32 = 0 };
++
++		tx_status.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
++		/** @todo Should there be check for room in the Tx
++		 * Status Queue.  If not remove the code above this comment. */
++
++		depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
++		deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
++
++		/* Program the transfer size and packet count
++		 *      as follows: xfersize = N * maxpacket +
++		 *      short_packet pktcnt = N + (short_packet
++		 *      exist ? 1 : 0) 
++		 */
++
++		if (core_if->dma_desc_enable == 0) {
++			deptsiz.b.xfersize =
++			    (ep->total_len - ep->xfer_count) >
++			    ep->maxpacket ? ep->maxpacket : (ep->total_len -
++							     ep->xfer_count);
++			deptsiz.b.pktcnt = 1;
++			if (core_if->dma_enable == 0) {
++				ep->xfer_len += deptsiz.b.xfersize;
++			} else {
++				ep->xfer_len = deptsiz.b.xfersize;
++			}
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++		} else {
++			ep->xfer_len =
++			    (ep->total_len - ep->xfer_count) >
++			    ep->maxpacket ? ep->maxpacket : (ep->total_len -
++							     ep->xfer_count);
++
++			dma_desc = core_if->dev_if->in_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.sp =
++			    (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++			dma_desc->status.b.bytes = ep->xfer_len;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DIEPDMA0 Register write */
++			DWC_WRITE_REG32(&in_regs->diepdma,
++					core_if->dev_if->dma_in_desc_addr);
++		}
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
++			    deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if (core_if->dma_desc_enable == 0)
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++		}
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if (core_if->en_multiple_tx_fifo == 0) {
++				/* First clear it from GINTSTS */
++				intr_mask.b.nptxfempty = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gintmsk,
++						 intr_mask.d32, intr_mask.d32);
++
++			} else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if (ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 0, fifoemptymsk);
++				}
++			}
++		}
++	} else {
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[0];
++
++		depctl.d32 = DWC_READ_REG32(&out_regs->doepctl);
++		deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count
++		 *      as follows: xfersize = N * maxpacket +
++		 *      short_packet pktcnt = N + (short_packet
++		 *      exist ? 1 : 0) 
++		 */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		if (core_if->dma_desc_enable == 0) {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		} else {
++			dma_desc = core_if->dev_if->out_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = ep->maxpacket;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			DWC_WRITE_REG32(&out_regs->doepdma,
++					core_if->dev_if->dma_out_desc_addr);
++		}
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
++			    deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if (core_if->dma_desc_enable == 0)
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++#ifdef DEBUG
++void dump_msg(const u8 * buf, unsigned int length)
++{
++	unsigned int start, num, i;
++	char line[52], *p;
++
++	if (length >= 512)
++		return;
++	start = 0;
++	while (length > 0) {
++		num = length < 16u ? length : 16u;
++		p = line;
++		for (i = 0; i < num; ++i) {
++			if (i == 8)
++				*p++ = ' ';
++			DWC_SPRINTF(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_PRINTF("%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 * buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function writes a packet into the Tx FIFO associated with the
++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written.  For
++ * periodic EPs the periodic Tx FIFO associated with the EP is written
++ * with all packets for the next micro-frame.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to write packet for.
++ * @param dma Indicates if DMA is being used.
++ */
++void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep,
++			     int dma)
++{
++	/**
++	 * The buffer is padded to DWORD on a per packet basis in
++	 * slave/dma mode if the MPS is not DWORD aligned. The last
++	 * packet, if short, is also padded to a multiple of DWORD.
++	 *
++	 * ep->xfer_buff always starts DWORD aligned in memory and is a
++	 * multiple of DWORD in length
++	 *
++	 * ep->xfer_len can be any number of bytes
++	 *
++	 * ep->xfer_count is a multiple of ep->maxpacket until the last
++	 *	packet
++	 *
++	 * FIFO access is DWORD */
++
++	uint32_t i;
++	uint32_t byte_count;
++	uint32_t dword_count;
++	uint32_t *fifo;
++	uint32_t *data_buff = (uint32_t *) ep->xfer_buff;
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if,
++		    ep);
++	if (ep->xfer_count >= ep->xfer_len) {
++		DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
++		return;
++	}
++
++	/* Find the byte length of the packet either short packet or MPS */
++	if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
++		byte_count = ep->xfer_len - ep->xfer_count;
++	} else {
++		byte_count = ep->maxpacket;
++	}
++
++	/* Find the DWORD length, padded by extra bytes as neccessary if MPS
++	 * is not a multiple of DWORD */
++	dword_count = (byte_count + 3) / 4;
++
++#ifdef VERBOSE
++	dump_msg(ep->xfer_buff, byte_count);
++#endif
++
++	/**@todo NGS Where are the Periodic Tx FIFO addresses
++	 * intialized?	What should this be? */
++
++	fifo = core_if->data_fifo[ep->num];
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n",
++		    fifo, data_buff, *data_buff, byte_count);
++
++	if (!dma) {
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			DWC_WRITE_REG32(fifo, *data_buff);
++		}
++	}
++
++	ep->xfer_count += byte_count;
++	ep->xfer_buff += byte_count;
++	ep->dma_addr += byte_count;
++}
++
++/**
++ * Set the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to set the stall on.
++ */
++void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++		    (ep->is_in ? "IN" : "OUT"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++		depctl.d32 = DWC_READ_REG32(depctl_addr);
++
++		/* set the disable and stall bits */
++		if (depctl.b.epena) {
++			depctl.b.epdis = 1;
++		}
++		depctl.b.stall = 1;
++		DWC_WRITE_REG32(depctl_addr, depctl.d32);
++	} else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++		depctl.d32 = DWC_READ_REG32(depctl_addr);
++
++		/* set the stall bit */
++		depctl.b.stall = 1;
++		DWC_WRITE_REG32(depctl_addr, depctl.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr));
++
++	return;
++}
++
++/**
++ * Clear the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to clear stall from.
++ */
++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++		    (ep->is_in ? "IN" : "OUT"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++	} else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++	}
++
++	depctl.d32 = DWC_READ_REG32(depctl_addr);
++
++	/* clear the stall bits */
++	depctl.b.stall = 0;
++
++	/*
++	 * USB Spec 9.4.5: For endpoints using data toggle, regardless
++	 * of whether an endpoint has the Halt feature set, a
++	 * ClearFeature(ENDPOINT_HALT) request always results in the
++	 * data toggle being reinitialized to DATA0.
++	 */
++	if (ep->type == DWC_OTG_EP_TYPE_INTR ||
++	    ep->type == DWC_OTG_EP_TYPE_BULK) {
++		depctl.b.setd0pid = 1;	/* DATA0 */
++	}
++
++	DWC_WRITE_REG32(depctl_addr, depctl.d32);
++	DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr));
++	return;
++}
++
++/**
++ * This function reads a packet from the Rx FIFO into the destination
++ * buffer. To read SETUP data use dwc_otg_read_setup_packet.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest	  Destination buffer for the packet.
++ * @param bytes  Number of bytes to copy to the destination.
++ */
++void dwc_otg_read_packet(dwc_otg_core_if_t * core_if,
++			 uint8_t * dest, uint16_t bytes)
++{
++	int i;
++	int word_count = (bytes + 3) / 4;
++
++	volatile uint32_t *fifo = core_if->data_fifo[0];
++	uint32_t *data_buff = (uint32_t *) dest;
++
++	/**
++	 * @todo Account for the case where _dest is not dword aligned. This
++	 * requires reading data from the FIFO into a uint32_t temp buffer,
++	 * then moving it into the data buffer.
++	 */
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
++		    core_if, dest, bytes);
++
++	for (i = 0; i < word_count; i++, data_buff++) {
++		*data_buff = DWC_READ_REG32(fifo);
++	}
++
++	return;
++}
++
++/**
++ * This functions reads the device registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINTF("Device Global Registers\n");
++	addr = &core_if->dev_if->dev_global_regs->dcfg;
++	DWC_PRINTF("DCFG		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->dctl;
++	DWC_PRINTF("DCTL		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->dsts;
++	DWC_PRINTF("DSTS		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->diepmsk;
++	DWC_PRINTF("DIEPMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->doepmsk;
++	DWC_PRINTF("DOEPMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->daint;
++	DWC_PRINTF("DAINT	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->daintmsk;
++	DWC_PRINTF("DAINTMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->dtknqr1;
++	DWC_PRINTF("DTKNQR1	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
++		addr = &core_if->dev_if->dev_global_regs->dtknqr2;
++		DWC_PRINTF("DTKNQR2	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++
++	addr = &core_if->dev_if->dev_global_regs->dvbusdis;
++	DWC_PRINTF("DVBUSID	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	addr = &core_if->dev_if->dev_global_regs->dvbuspulse;
++	DWC_PRINTF("DVBUSPULSE	@0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++
++	addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
++	DWC_PRINTF("DTKNQR3_DTHRCTL	 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++
++	if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
++		addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++		DWC_PRINTF("DTKNQR4	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++
++	addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++	DWC_PRINTF("FIFOEMPMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	if (core_if->hwcfg2.b.multi_proc_int) {
++
++		addr = &core_if->dev_if->dev_global_regs->deachint;
++		DWC_PRINTF("DEACHINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->dev_global_regs->deachintmsk;
++		DWC_PRINTF("DEACHINTMSK	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++
++		for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			addr =
++			    &core_if->dev_if->
++			    dev_global_regs->diepeachintmsk[i];
++			DWC_PRINTF("DIEPEACHINTMSK[%d]	 @0x%08lX : 0x%08X\n",
++				   i, (unsigned long)addr,
++				   DWC_READ_REG32(addr));
++		}
++
++		for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
++			addr =
++			    &core_if->dev_if->
++			    dev_global_regs->doepeachintmsk[i];
++			DWC_PRINTF("DOEPEACHINTMSK[%d]	 @0x%08lX : 0x%08X\n",
++				   i, (unsigned long)addr,
++				   DWC_READ_REG32(addr));
++		}
++	}
++
++	for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++		DWC_PRINTF("Device IN EP %d Registers\n", i);
++		addr = &core_if->dev_if->in_ep_regs[i]->diepctl;
++		DWC_PRINTF("DIEPCTL	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->diepint;
++		DWC_PRINTF("DIEPINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz;
++		DWC_PRINTF("DIETSIZ	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->diepdma;
++		DWC_PRINTF("DIEPDMA	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts;
++		DWC_PRINTF("DTXFSTS	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->diepdmab;
++		DWC_PRINTF("DIEPDMAB	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ );
++	}
++
++	for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
++		DWC_PRINTF("Device OUT EP %d Registers\n", i);
++		addr = &core_if->dev_if->out_ep_regs[i]->doepctl;
++		DWC_PRINTF("DOEPCTL	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->out_ep_regs[i]->doepint;
++		DWC_PRINTF("DOEPINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz;
++		DWC_PRINTF("DOETSIZ	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->out_ep_regs[i]->doepdma;
++		DWC_PRINTF("DOEPDMA	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		if (core_if->dma_enable) {	/* Don't access this register in SLAVE mode */
++			addr = &core_if->dev_if->out_ep_regs[i]->doepdmab;
++			DWC_PRINTF("DOEPDMAB	 @0x%08lX : 0x%08X\n",
++				   (unsigned long)addr, DWC_READ_REG32(addr));
++		}
++
++	}
++}
++
++/**
++ * This functions reads the SPRAM and prints its content
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if)
++{
++	volatile uint8_t *addr, *start_addr, *end_addr;
++
++	DWC_PRINTF("SPRAM Data:\n");
++	start_addr = (void *)core_if->core_global_regs;
++	DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr);
++	start_addr += 0x00028000;
++	end_addr = (void *)core_if->core_global_regs;
++	end_addr += 0x000280e0;
++
++	for (addr = start_addr; addr < end_addr; addr += 16) {
++		DWC_PRINTF
++		    ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n",
++		     (unsigned long)addr, addr[0], addr[1], addr[2], addr[3],
++		     addr[4], addr[5], addr[6], addr[7], addr[8], addr[9],
++		     addr[10], addr[11], addr[12], addr[13], addr[14], addr[15]
++		    );
++	}
++
++	return;
++}
++
++/**
++ * This function reads the host registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINTF("Host Global Registers\n");
++	addr = &core_if->host_if->host_global_regs->hcfg;
++	DWC_PRINTF("HCFG		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->hfir;
++	DWC_PRINTF("HFIR		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->hfnum;
++	DWC_PRINTF("HFNUM	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->hptxsts;
++	DWC_PRINTF("HPTXSTS	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->haint;
++	DWC_PRINTF("HAINT	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->haintmsk;
++	DWC_PRINTF("HAINTMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	if (core_if->dma_desc_enable) {
++		addr = &core_if->host_if->host_global_regs->hflbaddr;
++		DWC_PRINTF("HFLBADDR	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++
++	addr = core_if->host_if->hprt0;
++	DWC_PRINTF("HPRT0	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	for (i = 0; i < core_if->core_params->host_channels; i++) {
++		DWC_PRINTF("Host Channel %d Specific Registers\n", i);
++		addr = &core_if->host_if->hc_regs[i]->hcchar;
++		DWC_PRINTF("HCCHAR	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcsplt;
++		DWC_PRINTF("HCSPLT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcint;
++		DWC_PRINTF("HCINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcintmsk;
++		DWC_PRINTF("HCINTMSK	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hctsiz;
++		DWC_PRINTF("HCTSIZ	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcdma;
++		DWC_PRINTF("HCDMA	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		if (core_if->dma_desc_enable) {
++			addr = &core_if->host_if->hc_regs[i]->hcdmab;
++			DWC_PRINTF("HCDMAB	 @0x%08lX : 0x%08X\n",
++				   (unsigned long)addr, DWC_READ_REG32(addr));
++		}
++
++	}
++	return;
++}
++
++/**
++ * This function reads the core global registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if)
++{
++	int i, ep_num;
++	volatile uint32_t *addr;
++	char *txfsiz;
++
++	DWC_PRINTF("Core Global Registers\n");
++	addr = &core_if->core_global_regs->gotgctl;
++	DWC_PRINTF("GOTGCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gotgint;
++	DWC_PRINTF("GOTGINT	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gahbcfg;
++	DWC_PRINTF("GAHBCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gusbcfg;
++	DWC_PRINTF("GUSBCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->grstctl;
++	DWC_PRINTF("GRSTCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gintsts;
++	DWC_PRINTF("GINTSTS	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gintmsk;
++	DWC_PRINTF("GINTMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->grxstsr;
++	DWC_PRINTF("GRXSTSR	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->grxfsiz;
++	DWC_PRINTF("GRXFSIZ	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gnptxfsiz;
++	DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gnptxsts;
++	DWC_PRINTF("GNPTXSTS	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gi2cctl;
++	DWC_PRINTF("GI2CCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gpvndctl;
++	DWC_PRINTF("GPVNDCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ggpio;
++	DWC_PRINTF("GGPIO	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->guid;
++	DWC_PRINTF("GUID		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gsnpsid;
++	DWC_PRINTF("GSNPSID	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg1;
++	DWC_PRINTF("GHWCFG1	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg2;
++	DWC_PRINTF("GHWCFG2	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg3;
++	DWC_PRINTF("GHWCFG3	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg4;
++	DWC_PRINTF("GHWCFG4	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->glpmcfg;
++	DWC_PRINTF("GLPMCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gpwrdn;
++	DWC_PRINTF("GPWRDN	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gdfifocfg;
++	DWC_PRINTF("GDFIFOCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->adpctl;
++	DWC_PRINTF("ADPCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   dwc_otg_adp_read_reg(core_if));
++	addr = &core_if->core_global_regs->hptxfsiz;
++	DWC_PRINTF("HPTXFSIZ	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	if (core_if->en_multiple_tx_fifo == 0) {
++		ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep;
++		txfsiz = "DPTXFSIZ";
++	} else {
++		ep_num = core_if->hwcfg4.b.num_in_eps;
++		txfsiz = "DIENPTXF";
++	}
++	for (i = 0; i < ep_num; i++) {
++		addr = &core_if->core_global_regs->dtxfsiz[i];
++		DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1,
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++	addr = core_if->pcgcctl;
++	DWC_PRINTF("PCGCCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++}
++
++/**
++ * Flush a Tx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param num Tx FIFO to flush.
++ */
++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = {.d32 = 0 };
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num);
++
++	greset.b.txfflsh = 1;
++	greset.b.txfnum = num;
++	DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++				 __func__, greset.d32,
++				 DWC_READ_REG32(&global_regs->gnptxsts));
++			break;
++		}
++		dwc_udelay(1);
++	} while (greset.b.txfflsh == 1);
++
++	/* Wait for 3 PHY Clocks */
++	dwc_udelay(1);
++}
++
++/**
++ * Flush Rx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = {.d32 = 0 };
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__);
++	/*
++	 *
++	 */
++	greset.b.rxfflsh = 1;
++	DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
++				 greset.d32);
++			break;
++		}
++		dwc_udelay(1);
++	} while (greset.b.rxfflsh == 1);
++
++	/* Wait for 3 PHY Clocks */
++	dwc_udelay(1);
++}
++
++/**
++ * Do core a soft reset of the core.  Be careful with this because it
++ * resets all the internal state machines of the core.
++ */
++void dwc_otg_core_reset(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = {.d32 = 0 };
++	int count = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
++	/* Wait for AHB master IDLE state. */
++	do {
++		dwc_udelay(10);
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 100000) {
++			DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
++				 greset.d32);
++			return;
++		}
++	}
++	while (greset.b.ahbidle == 0);
++
++	/* Core Soft Reset */
++	count = 0;
++	greset.b.csftrst = 1;
++	DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
++	do {
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n",
++				 __func__, greset.d32);
++			break;
++		}
++		dwc_udelay(1);
++	}
++	while (greset.b.csftrst == 1);
++
++	/* Wait for 3 PHY Clocks */
++	dwc_mdelay(100);
++}
++
++uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if)
++{
++	return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
++}
++
++uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if)
++{
++	return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
++}
++
++/**
++ * Register HCD callbacks. The callbacks are used to start and stop
++ * the HCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the HCD callback structure.
++ * @param p pointer to be passed to callback function (usb_hcd*).
++ */
++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if,
++					dwc_otg_cil_callbacks_t * cb, void *p)
++{
++	core_if->hcd_cb = cb;
++	cb->p = p;
++}
++
++/**
++ * Register PCD callbacks. The callbacks are used to start and stop
++ * the PCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the PCD callback structure.
++ * @param p pointer to be passed to callback function (pcd*).
++ */
++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if,
++					dwc_otg_cil_callbacks_t * cb, void *p)
++{
++	core_if->pcd_cb = cb;
++	cb->p = p;
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function writes isoc data per 1 (micro)frame into tx fifo
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0 };
++	uint32_t len = 0;
++	uint32_t dwords;
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++
++	ep_regs = core_if->dev_if->in_ep_regs[ep->num];
++
++	len = ep->xfer_len - ep->xfer_count;
++
++	if (len > ep->maxpacket) {
++		len = ep->maxpacket;
++	}
++
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 =
++	    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
++
++	while (txstatus.b.txfspcavail > dwords &&
++	       ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, ep, 0);
++
++		len = ep->xfer_len - ep->xfer_count;
++		if (len > ep->maxpacket) {
++			len = ep->maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++				   dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num,
++			    txstatus.d32);
++	}
++}
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if,
++				       dwc_ep_t * ep)
++{
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dsts_data_t dsts = {.d32 = 0 };
++	volatile uint32_t *addr;
++
++	if (ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++	ep->xfer_buff = ep->cur_pkt_addr;
++	ep->dma_addr = ep->cur_pkt_dma_addr;
++
++	if (ep->is_in) {
++		/* Program the transfer size and packet count
++		 *      as follows: xfersize = N * maxpacket +
++		 *      short_packet pktcnt = N + (short_packet
++		 *      exist ? 1 : 0) 
++		 */
++		deptsiz.b.xfersize = ep->xfer_len;
++		deptsiz.b.pktcnt =
++		    (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
++		deptsiz.b.mc = deptsiz.b.pktcnt;
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz,
++				deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->in_ep_regs[ep->num]->
++					 diepdma), (uint32_t) ep->dma_addr);
++		}
++	} else {
++		deptsiz.b.pktcnt =
++		    (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket;
++		deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++		DWC_WRITE_REG32(&core_if->dev_if->
++				out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
++
++		if (core_if->dma_enable) {
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->
++					 out_ep_regs[ep->num]->doepdma),
++					(uint32_t) ep->dma_addr);
++		}
++	}
++
++	/** Enable endpoint, clear nak  */
++
++	depctl.d32 = 0;
++	if (ep->bInterval == 1) {
++		dsts.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++		ep->next_frame = dsts.b.soffn + ep->bInterval;
++
++		if (ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	} else {
++		ep->next_frame += ep->bInterval;
++
++		if (ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	}
++	depctl.b.epena = 1;
++	depctl.b.cnak = 1;
++
++	DWC_MODIFY_REG32(addr, 0, depctl.d32);
++	depctl.d32 = DWC_READ_REG32(addr);
++
++	if (ep->is_in && core_if->dma_enable == 0) {
++		write_isoc_frame_data(core_if, ep);
++	}
++
++}
++#endif /* DWC_EN_ISOC */
++
++static void dwc_otg_set_uninitialized(int32_t * p, int size)
++{
++	int i;
++	for (i = 0; i < size; i++) {
++		p[i] = -1;
++	}
++}
++
++static int dwc_otg_param_initialized(int32_t val)
++{
++	return val != -1;
++}
++
++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params));
++	if (!core_if->core_params) {
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_otg_set_uninitialized((int32_t *) core_if->core_params,
++				  sizeof(*core_if->core_params) /
++				  sizeof(int32_t));
++	DWC_PRINTF("Setting default values for core params\n");
++	dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default);
++	dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default);
++	dwc_otg_set_param_dma_desc_enable(core_if,
++					  dwc_param_dma_desc_enable_default);
++	dwc_otg_set_param_opt(core_if, dwc_param_opt_default);
++	dwc_otg_set_param_dma_burst_size(core_if,
++					 dwc_param_dma_burst_size_default);
++	dwc_otg_set_param_host_support_fs_ls_low_power(core_if,
++						       dwc_param_host_support_fs_ls_low_power_default);
++	dwc_otg_set_param_enable_dynamic_fifo(core_if,
++					      dwc_param_enable_dynamic_fifo_default);
++	dwc_otg_set_param_data_fifo_size(core_if,
++					 dwc_param_data_fifo_size_default);
++	dwc_otg_set_param_dev_rx_fifo_size(core_if,
++					   dwc_param_dev_rx_fifo_size_default);
++	dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if,
++						  dwc_param_dev_nperio_tx_fifo_size_default);
++	dwc_otg_set_param_host_rx_fifo_size(core_if,
++					    dwc_param_host_rx_fifo_size_default);
++	dwc_otg_set_param_host_nperio_tx_fifo_size(core_if,
++						   dwc_param_host_nperio_tx_fifo_size_default);
++	dwc_otg_set_param_host_perio_tx_fifo_size(core_if,
++						  dwc_param_host_perio_tx_fifo_size_default);
++	dwc_otg_set_param_max_transfer_size(core_if,
++					    dwc_param_max_transfer_size_default);
++	dwc_otg_set_param_max_packet_count(core_if,
++					   dwc_param_max_packet_count_default);
++	dwc_otg_set_param_host_channels(core_if,
++					dwc_param_host_channels_default);
++	dwc_otg_set_param_dev_endpoints(core_if,
++					dwc_param_dev_endpoints_default);
++	dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default);
++	dwc_otg_set_param_speed(core_if, dwc_param_speed_default);
++	dwc_otg_set_param_host_ls_low_power_phy_clk(core_if,
++						    dwc_param_host_ls_low_power_phy_clk_default);
++	dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default);
++	dwc_otg_set_param_phy_ulpi_ext_vbus(core_if,
++					    dwc_param_phy_ulpi_ext_vbus_default);
++	dwc_otg_set_param_phy_utmi_width(core_if,
++					 dwc_param_phy_utmi_width_default);
++	dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default);
++	dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default);
++	dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default);
++	dwc_otg_set_param_en_multiple_tx_fifo(core_if,
++					      dwc_param_en_multiple_tx_fifo_default);
++	for (i = 0; i < 15; i++) {
++		dwc_otg_set_param_dev_perio_tx_fifo_size(core_if,
++							 dwc_param_dev_perio_tx_fifo_size_default,
++							 i);
++	}
++
++	for (i = 0; i < 15; i++) {
++		dwc_otg_set_param_dev_tx_fifo_size(core_if,
++						   dwc_param_dev_tx_fifo_size_default,
++						   i);
++	}
++	dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default);
++	dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default);
++	dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default);
++	dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default);
++	dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default);
++	dwc_otg_set_param_tx_thr_length(core_if,
++					dwc_param_tx_thr_length_default);
++	dwc_otg_set_param_rx_thr_length(core_if,
++					dwc_param_rx_thr_length_default);
++	dwc_otg_set_param_ahb_thr_ratio(core_if,
++					dwc_param_ahb_thr_ratio_default);
++	dwc_otg_set_param_power_down(core_if, dwc_param_power_down_default);
++	dwc_otg_set_param_reload_ctl(core_if, dwc_param_reload_ctl_default);
++	dwc_otg_set_param_dev_out_nak(core_if, dwc_param_dev_out_nak_default);
++	dwc_otg_set_param_cont_on_bna(core_if, dwc_param_cont_on_bna_default);
++	dwc_otg_set_param_ahb_single(core_if, dwc_param_ahb_single_default);
++	dwc_otg_set_param_otg_ver(core_if, dwc_param_otg_ver_default);
++	dwc_otg_set_param_adp_enable(core_if, dwc_param_adp_enable_default);
++	DWC_PRINTF("Finished setting default values for core params\n");
++
++	return 0;
++}
++
++uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->dma_enable;
++}
++
++/* Checks if the parameter is outside of its valid range of values */
++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
++		(((_param_) < (_low_)) || \
++		((_param_) > (_high_)))
++
++/* Parameter access functions */
++int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int valid;
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 2)) {
++		DWC_WARN("Wrong value for otg_cap parameter\n");
++		DWC_WARN("otg_cap parameter must be 0,1 or 2\n");
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	valid = 1;
++	switch (val) {
++	case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
++		if (core_if->hwcfg2.b.op_mode !=
++		    DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++			valid = 0;
++		break;
++	case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
++		if ((core_if->hwcfg2.b.op_mode !=
++		     DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++		    && (core_if->hwcfg2.b.op_mode !=
++			DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
++		    && (core_if->hwcfg2.b.op_mode !=
++			DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE)
++		    && (core_if->hwcfg2.b.op_mode !=
++			DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
++			valid = 0;
++		}
++		break;
++	case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
++		/* always valid */
++		break;
++	}
++	if (!valid) {
++		if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) {
++			DWC_ERROR
++			    ("%d invalid for otg_cap paremter. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (((core_if->hwcfg2.b.op_mode ==
++		       DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++		      || (core_if->hwcfg2.b.op_mode ==
++			  DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
++		      || (core_if->hwcfg2.b.op_mode ==
++			  DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE)
++		      || (core_if->hwcfg2.b.op_mode ==
++			  DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
++		     DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
++		     DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->otg_cap = val;
++out:
++	return retval;
++}
++
++int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->otg_cap;
++}
++
++int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for opt parameter\n");
++		return -DWC_E_INVALID;
++	}
++	core_if->core_params->opt = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->opt;
++}
++
++int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for dma enable\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) {
++		if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) {
++			DWC_ERROR
++			    ("%d invalid for dma_enable paremter. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dma_enable = val;
++	if (val == 0) {
++		dwc_otg_set_param_dma_desc_enable(core_if, 0);
++	}
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dma_enable;
++}
++
++int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for dma_enable\n");
++		DWC_WARN("dma_desc_enable must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1)
++	    && ((dwc_otg_get_param_dma_enable(core_if) == 0)
++		|| (core_if->hwcfg4.b.desc_dma == 0))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dma_desc_enable)) {
++			DWC_ERROR
++			    ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++	core_if->core_params->dma_desc_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dma_desc_enable;
++}
++
++int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if,
++						   int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for host_support_fs_low_power\n");
++		DWC_WARN("host_support_fs_low_power must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++	core_if->core_params->host_support_fs_ls_low_power = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t *
++						       core_if)
++{
++	return core_if->core_params->host_support_fs_ls_low_power;
++}
++
++int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if,
++					  int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for enable_dynamic_fifo\n");
++		DWC_WARN("enable_dynamic_fifo must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->enable_dynamic_fifo)) {
++			DWC_ERROR
++			    ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++	core_if->core_params->enable_dynamic_fifo = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->enable_dynamic_fifo;
++}
++
++int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 32, 32768)) {
++		DWC_WARN("Wrong value for data_fifo_size\n");
++		DWC_WARN("data_fifo_size must be 32-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > core_if->hwcfg3.b.dfifo_depth) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->data_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for data_fifo_size parameter. Check HW configuration.\n",
++			     val);
++		}
++		val = core_if->hwcfg3.b.dfifo_depth;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->data_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->data_fifo_size;
++}
++
++int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for dev_rx_fifo_size\n");
++		DWC_WARN("dev_rx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) {
++		if (dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) {
++		DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val);
++		}
++		val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_rx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_rx_fifo_size;
++}
++
++int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for dev_nperio_tx_fifo\n");
++		DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_nperio_tx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >>
++		     16);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_nperio_tx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_nperio_tx_fifo_size;
++}
++
++int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if,
++					int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for host_rx_fifo_size\n");
++		DWC_WARN("host_rx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_rx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for host_rx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_rx_fifo_size = val;
++	return retval;
++
++}
++
++int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_rx_fifo_size;
++}
++
++int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					       int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n");
++		DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_nperio_tx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >>
++		     16);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_nperio_tx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_nperio_tx_fifo_size;
++}
++
++int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for host_perio_tx_fifo_size\n");
++		DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > ((core_if->hptxfsiz.d32) >> 16)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_perio_tx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val = (core_if->hptxfsiz.d32) >> 16;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_perio_tx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_perio_tx_fifo_size;
++}
++
++int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if,
++					int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) {
++		DWC_WARN("Wrong value for max_transfer_size\n");
++		DWC_WARN("max_transfer_size must be 2047-524288\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->max_transfer_size)) {
++			DWC_ERROR
++			    ("%d invalid for max_transfer_size. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) -
++		     1);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->max_transfer_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->max_transfer_size;
++}
++
++int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 15, 511)) {
++		DWC_WARN("Wrong value for max_packet_count\n");
++		DWC_WARN("max_packet_count must be 15-511\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->max_packet_count)) {
++			DWC_ERROR
++			    ("%d invalid for max_packet_count. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->max_packet_count = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->max_packet_count;
++}
++
++int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 1, 16)) {
++		DWC_WARN("Wrong value for host_channels\n");
++		DWC_WARN("host_channels must be 1-16\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (core_if->hwcfg2.b.num_host_chan + 1)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_channels)) {
++			DWC_ERROR
++			    ("%d invalid for host_channels. Check HW configurations.\n",
++			     val);
++		}
++		val = (core_if->hwcfg2.b.num_host_chan + 1);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_channels = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_channels;
++}
++
++int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 1, 15)) {
++		DWC_WARN("Wrong value for dev_endpoints\n");
++		DWC_WARN("dev_endpoints must be 1-15\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (core_if->hwcfg2.b.num_dev_ep)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_endpoints)) {
++			DWC_ERROR
++			    ("%d invalid for dev_endpoints. Check HW configurations.\n",
++			     val);
++		}
++		val = core_if->hwcfg2.b.num_dev_ep;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_endpoints = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_endpoints;
++}
++
++int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 2)) {
++		DWC_WARN("Wrong value for phy_type\n");
++		DWC_WARN("phy_type must be 0,1 or 2\n");
++		return -DWC_E_INVALID;
++	}
++#ifndef NO_FS_PHY_HW_CHECKS
++	if ((val == DWC_PHY_TYPE_PARAM_UTMI) &&
++	    ((core_if->hwcfg2.b.hs_phy_type == 1) ||
++	     (core_if->hwcfg2.b.hs_phy_type == 3))) {
++		valid = 1;
++	} else if ((val == DWC_PHY_TYPE_PARAM_ULPI) &&
++		   ((core_if->hwcfg2.b.hs_phy_type == 2) ||
++		    (core_if->hwcfg2.b.hs_phy_type == 3))) {
++		valid = 1;
++	} else if ((val == DWC_PHY_TYPE_PARAM_FS) &&
++		   (core_if->hwcfg2.b.fs_phy_type == 1)) {
++		valid = 1;
++	}
++	if (!valid) {
++		if (dwc_otg_param_initialized(core_if->core_params->phy_type)) {
++			DWC_ERROR
++			    ("%d invalid for phy_type. Check HW configurations.\n",
++			     val);
++		}
++		if (core_if->hwcfg2.b.hs_phy_type) {
++			if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
++			    (core_if->hwcfg2.b.hs_phy_type == 1)) {
++				val = DWC_PHY_TYPE_PARAM_UTMI;
++			} else {
++				val = DWC_PHY_TYPE_PARAM_ULPI;
++			}
++		}
++		retval = -DWC_E_INVALID;
++	}
++#endif
++	core_if->core_params->phy_type = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_type;
++}
++
++int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for speed parameter\n");
++		DWC_WARN("max_speed parameter must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++	if ((val == 0)
++	    && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) {
++		if (dwc_otg_param_initialized(core_if->core_params->speed)) {
++			DWC_ERROR
++			    ("%d invalid for speed paremter. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (dwc_otg_get_param_phy_type(core_if) ==
++		     DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
++		retval = -DWC_E_INVALID;
++	}
++	core_if->core_params->speed = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->speed;
++}
++
++int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if,
++						int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN
++		    ("Wrong value for host_ls_low_power_phy_clk parameter\n");
++		DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ)
++	    && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_ls_low_power_phy_clk)) {
++			DWC_ERROR
++			    ("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (dwc_otg_get_param_phy_type(core_if) ==
++		     DWC_PHY_TYPE_PARAM_FS) ?
++		    DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ :
++		    DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_ls_low_power_phy_clk = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_ls_low_power_phy_clk;
++}
++
++int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for phy_ulpi_ddr\n");
++		DWC_WARN("phy_upli_ddr must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->phy_ulpi_ddr = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_ulpi_ddr;
++}
++
++int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if,
++					int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n");
++		DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->phy_ulpi_ext_vbus = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_ulpi_ext_vbus;
++}
++
++int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) {
++		DWC_WARN("Wrong valaue for phy_utmi_width\n");
++		DWC_WARN("phy_utmi_width must be 8 or 16\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->phy_utmi_width = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_utmi_width;
++}
++
++int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for ulpi_fs_ls\n");
++		DWC_WARN("ulpi_fs_ls must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->ulpi_fs_ls = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ulpi_fs_ls;
++}
++
++int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for ts_dline\n");
++		DWC_WARN("ts_dline must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->ts_dline = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ts_dline;
++}
++
++int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for i2c_enable\n");
++		DWC_WARN("i2c_enable must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++#ifndef NO_FS_PHY_HW_CHECK
++	if (val == 1 && core_if->hwcfg3.b.i2c == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->i2c_enable)) {
++			DWC_ERROR
++			    ("%d invalid for i2c_enable. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++#endif
++
++	core_if->core_params->i2c_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->i2c_enable;
++}
++
++int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					     int32_t val, int fifo_num)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 4, 768)) {
++		DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n");
++		DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val >
++	    (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) {
++			DWC_ERROR
++			    ("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n",
++			     val, fifo_num);
++		}
++		val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]));
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++						 int fifo_num)
++{
++	return core_if->core_params->dev_perio_tx_fifo_size[fifo_num];
++}
++
++int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if,
++					  int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n");
++		DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->en_multiple_tx_fifo)) {
++			DWC_ERROR
++			    ("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->en_multiple_tx_fifo = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->en_multiple_tx_fifo;
++}
++
++int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val,
++				       int fifo_num)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 4, 768)) {
++		DWC_WARN("Wrong value for dev_tx_fifo_size\n");
++		DWC_WARN("dev_tx_fifo_size must be 4-768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val >
++	    (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_tx_fifo_size[fifo_num])) {
++			DWC_ERROR
++			    ("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n",
++			     val, fifo_num);
++		}
++		val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]));
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_tx_fifo_size[fifo_num] = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					   int fifo_num)
++{
++	return core_if->core_params->dev_tx_fifo_size[fifo_num];
++}
++
++int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 7)) {
++		DWC_WARN("Wrong value for thr_ctl\n");
++		DWC_WARN("thr_ctl must be 0-7\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val != 0) &&
++	    (!dwc_otg_get_param_dma_enable(core_if) ||
++	     !core_if->hwcfg4.b.ded_fifo_en)) {
++		if (dwc_otg_param_initialized(core_if->core_params->thr_ctl)) {
++			DWC_ERROR
++			    ("%d invalid for parameter thr_ctl. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->thr_ctl = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->thr_ctl;
++}
++
++int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for lpm_enable\n");
++		DWC_WARN("lpm_enable must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val && !core_if->hwcfg3.b.otg_lpm_en) {
++		if (dwc_otg_param_initialized(core_if->core_params->lpm_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter lpm_enable. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->lpm_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->lpm_enable;
++}
++
++int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 8, 128)) {
++		DWC_WARN("Wrong valaue for tx_thr_length\n");
++		DWC_WARN("tx_thr_length must be 8 - 128\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->tx_thr_length = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->tx_thr_length;
++}
++
++int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 8, 128)) {
++		DWC_WARN("Wrong valaue for rx_thr_length\n");
++		DWC_WARN("rx_thr_length must be 8 - 128\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->rx_thr_length = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->rx_thr_length;
++}
++
++int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 1, 1) &&
++	    DWC_OTG_PARAM_TEST(val, 4, 4) &&
++	    DWC_OTG_PARAM_TEST(val, 8, 8) &&
++	    DWC_OTG_PARAM_TEST(val, 16, 16) &&
++	    DWC_OTG_PARAM_TEST(val, 32, 32) &&
++	    DWC_OTG_PARAM_TEST(val, 64, 64) &&
++	    DWC_OTG_PARAM_TEST(val, 128, 128) &&
++	    DWC_OTG_PARAM_TEST(val, 256, 256)) {
++		DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val);
++		return -DWC_E_INVALID;
++	}
++	core_if->core_params->dma_burst_size = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dma_burst_size;
++}
++
++int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val);
++		return -DWC_E_INVALID;
++	}
++	if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) {
++		if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter pti_enable. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->pti_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->pti_enable;
++}
++
++int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val);
++		return -DWC_E_INVALID;
++	}
++	if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) {
++		if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter mpi_enable. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->mpi_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->mpi_enable;
++}
++
++int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `adp_enable'\n", val);
++		return -DWC_E_INVALID;
++	}
++	if (val && (core_if->hwcfg3.b.adp_supp == 0)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->adp_supp_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter adp_enable. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->adp_supp_enable = val;
++	/*Set OTG version 2.0 in case of enabling ADP*/
++	if (val)
++		dwc_otg_set_param_otg_ver(core_if, 1);
++
++	return retval;
++}
++
++int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->adp_supp_enable;
++}
++
++int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val);
++		DWC_WARN("ic_usb_cap must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val && (core_if->hwcfg2.b.otg_enable_ic_usb == 0)) {
++		if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) {
++			DWC_ERROR
++			    ("%d invalid for parameter ic_usb_cap. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->ic_usb_cap = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ic_usb_cap;
++}
++
++int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 3)) {
++		DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val);
++		DWC_WARN("ahb_thr_ratio must be 0 - 3\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val
++	    && (core_if->snpsid < OTG_CORE_REV_2_81a
++		|| !dwc_otg_get_param_thr_ctl(core_if))) {
++		valid = 0;
++	} else if (val
++		   && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) <
++		       4)) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->ahb_thr_ratio)) {
++			DWC_ERROR
++			    ("%d invalid for parameter ahb_thr_ratio. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++
++	core_if->core_params->ahb_thr_ratio = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ahb_thr_ratio;
++}
++
++int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++	hwcfg4_data_t hwcfg4 = {.d32 = 0 };
++	hwcfg4.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4);
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 3)) {
++		DWC_WARN("`%d' invalid for parameter `power_down'\n", val);
++		DWC_WARN("power_down must be 0 - 2\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 2) && (core_if->snpsid < OTG_CORE_REV_2_91a)) {
++		valid = 0;
++	}
++	if ((val == 3)
++	    && ((core_if->snpsid < OTG_CORE_REV_3_00a)
++		|| (hwcfg4.b.xhiber == 0))) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->power_down)) {
++			DWC_ERROR
++			    ("%d invalid for parameter power_down. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->power_down = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->power_down;
++}
++
++int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `reload_ctl'\n", val);
++		DWC_WARN("reload_ctl must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_92a)) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->reload_ctl)) {
++			DWC_ERROR("%d invalid for parameter reload_ctl."
++				  "Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->reload_ctl = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->reload_ctl;
++}
++
++int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `dev_out_nak'\n", val);
++		DWC_WARN("dev_out_nak must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_93a) ||
++		!(core_if->core_params->dma_desc_enable))) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->dev_out_nak)) {
++			DWC_ERROR("%d invalid for parameter dev_out_nak."
++				"Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->dev_out_nak = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_out_nak;
++}
++
++int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `cont_on_bna'\n", val);
++		DWC_WARN("cont_on_bna must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_94a) ||
++		!(core_if->core_params->dma_desc_enable))) {
++			valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->cont_on_bna)) {
++			DWC_ERROR("%d invalid for parameter cont_on_bna."
++				"Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->cont_on_bna = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->cont_on_bna;
++}
++
++int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `ahb_single'\n", val);
++		DWC_WARN("ahb_single must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_94a)) {
++			valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->ahb_single)) {
++			DWC_ERROR("%d invalid for parameter ahb_single."
++				"Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->ahb_single = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ahb_single;
++}
++
++int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `otg_ver'\n", val);
++		DWC_WARN
++		    ("otg_ver must be 0(for OTG 1.3 support) or 1(for OTG 2.0 support)\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->otg_ver = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->otg_ver;
++}
++
++uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if)
++{
++	gotgctl_data_t otgctl;
++	otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	return otgctl.b.hstnegscs;
++}
++
++uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if)
++{
++	gotgctl_data_t otgctl;
++	otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	return otgctl.b.sesreqscs;
++}
++
++void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	if(core_if->otg_ver == 0) {
++		gotgctl_data_t otgctl;
++		otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++		otgctl.b.hnpreq = val;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32);
++	} else {
++		core_if->otg_sts = val;
++	}
++}
++
++uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if)
++{
++	return core_if->snpsid;
++}
++
++uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	return gintsts.b.curmode;
++}
++
++uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	return usbcfg.b.hnpcap;
++}
++
++void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	usbcfg.b.hnpcap = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32);
++}
++
++uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	return usbcfg.b.srpcap;
++}
++
++void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	usbcfg.b.srpcap = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32);
++}
++
++uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if)
++{
++	dcfg_data_t dcfg;
++	/* originally: dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); */
++
++        dcfg.d32 = -1; //GRAYG	
++        DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if);
++        if (NULL == core_if)
++                DWC_ERROR("reg request with NULL core_if\n");
++        DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__,
++                    core_if, core_if->dev_if);
++        if (NULL == core_if->dev_if)
++                DWC_ERROR("reg request with NULL dev_if\n");
++        DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->"
++                    "dev_global_regs(%p)\n", __func__,
++                    core_if, core_if->dev_if,
++                    core_if->dev_if->dev_global_regs);
++        if (NULL == core_if->dev_if->dev_global_regs)
++                DWC_ERROR("reg request with NULL dev_global_regs\n");
++        else {
++                DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->"
++                            "dev_global_regs(%p)->dcfg = %p\n", __func__,
++                            core_if, core_if->dev_if,
++                            core_if->dev_if->dev_global_regs,
++                            &core_if->dev_if->dev_global_regs->dcfg);
++        	dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++        }
++	return dcfg.b.devspd;
++}
++
++void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	dcfg_data_t dcfg;
++	dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	return hprt0.b.prtconnsts;
++}
++
++uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++	return dsts.b.enumspd;
++}
++
++uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	return hprt0.b.prtpwr;
++
++}
++
++uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if)
++{
++	return core_if->hibernation_suspend;
++}
++
++void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtpwr = val;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++}
++
++uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	return hprt0.b.prtsusp;
++
++}
++
++void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtsusp = val;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++}
++
++uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if)
++{
++	hfir_data_t hfir;
++	hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
++	return hfir.b.frint;
++
++}
++
++void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hfir_data_t hfir;
++	uint32_t fram_int;
++	fram_int = calc_frame_interval(core_if);
++	hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
++	if (!core_if->core_params->reload_ctl) {
++		DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is"
++			 "not set to 1.\nShould load driver with reload_ctl=1"
++			 " module parameter\n");
++		return;
++	}
++	switch (fram_int) {
++	case 3750:
++		if ((val < 3350) || (val > 4150)) {
++			DWC_WARN("HFIR interval for HS core and 30 MHz"
++				 "clock freq should be from 3350 to 4150\n");
++			return;
++		}
++		break;
++	case 30000:
++		if ((val < 26820) || (val > 33180)) {
++			DWC_WARN("HFIR interval for FS/LS core and 30 MHz"
++				 "clock freq should be from 26820 to 33180\n");
++			return;
++		}
++		break;
++	case 6000:
++		if ((val < 5360) || (val > 6640)) {
++			DWC_WARN("HFIR interval for HS core and 48 MHz"
++				 "clock freq should be from 5360 to 6640\n");
++			return;
++		}
++		break;
++	case 48000:
++		if ((val < 42912) || (val > 53088)) {
++			DWC_WARN("HFIR interval for FS/LS core and 48 MHz"
++				 "clock freq should be from 42912 to 53088\n");
++			return;
++		}
++		break;
++	case 7500:
++		if ((val < 6700) || (val > 8300)) {
++			DWC_WARN("HFIR interval for HS core and 60 MHz"
++				 "clock freq should be from 6700 to 8300\n");
++			return;
++		}
++		break;
++	case 60000:
++		if ((val < 53640) || (val > 65536)) {
++			DWC_WARN("HFIR interval for FS/LS core and 60 MHz"
++				 "clock freq should be from 53640 to 65536\n");
++			return;
++		}
++		break;
++	default:
++		DWC_WARN("Unknown frame interval\n");
++		return;
++		break;
++
++	}
++	hfir.b.frint = val;
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32);
++}
++
++uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if)
++{
++	hcfg_data_t hcfg;
++	hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	return hcfg.b.modechtimen;
++
++}
++
++void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hcfg_data_t hcfg;
++	hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.modechtimen = val;
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtres = val;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++}
++
++uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if)
++{
++	dctl_data_t dctl;
++	dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	return dctl.b.rmtwkupsig;
++}
++
++uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++
++	DWC_ASSERT(!
++		   ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts),
++		   "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n",
++		   core_if->lx_state, lpmcfg.b.prt_sleep_sts);
++
++	return lpmcfg.b.prt_sleep_sts;
++}
++
++uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.rem_wkup_en;
++}
++
++uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.appl_resp;
++}
++
++void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.appl_resp = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++}
++
++uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.hsic_connect;
++}
++
++void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.hsic_connect = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++}
++
++uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.inv_sel_hsic;
++
++}
++
++void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.inv_sel_hsic = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++}
++
++uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++}
++
++void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val);
++}
++
++uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++}
++
++void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val);
++}
++
++uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++}
++
++void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val);
++}
++
++uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz);
++}
++
++void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val);
++}
++
++uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl);
++}
++
++void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val);
++}
++
++uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->ggpio);
++}
++
++void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val);
++}
++
++uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(core_if->host_if->hprt0);
++
++}
++
++void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(core_if->host_if->hprt0, val);
++}
++
++uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->guid);
++}
++
++void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->guid, val);
++}
++
++uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
++}
++
++uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if)
++{
++	return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103);
++}
++
++/**
++ * Start the SRP timer to detect when the SRP does not complete within
++ * 6 seconds.
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if)
++{
++	core_if->srp_timer_started = 1;
++	DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ );
++}
++
++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if)
++{
++	uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl);
++	gotgctl_data_t mem;
++	gotgctl_data_t val;
++
++	val.d32 = DWC_READ_REG32(addr);
++	if (val.b.sesreq) {
++		DWC_ERROR("Session Request Already active!\n");
++		return;
++	}
++
++	DWC_INFO("Session Request Initated\n");	//NOTICE
++	mem.d32 = DWC_READ_REG32(addr);
++	mem.b.sesreq = 1;
++	DWC_WRITE_REG32(addr, mem.d32);
++
++	/* Start the SRP timer */
++	dwc_otg_pcd_start_srp_timer(core_if);
++	return;
++}
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1464 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
++ * $Revision: #123 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CIL_H__)
++#define __DWC_CIL_H__
++
++#include "dwc_list.h"
++#include "dwc_otg_dbg.h"
++#include "dwc_otg_regs.h"
++
++#include "dwc_otg_core_if.h"
++#include "dwc_otg_adp.h"
++
++/**
++ * @file
++ * This file contains the interface to the Core Interface Layer.
++ */
++
++#ifdef DWC_UTE_CFI
++
++#define MAX_DMA_DESCS_PER_EP	256
++
++/**
++ * Enumeration for the data buffer mode
++ */
++typedef enum _data_buffer_mode {
++	BM_STANDARD = 0,	/* data buffer is in normal mode */
++	BM_SG = 1,		/* data buffer uses the scatter/gather mode */
++	BM_CONCAT = 2,		/* data buffer uses the concatenation mode */
++	BM_CIRCULAR = 3,	/* data buffer uses the circular DMA mode */
++	BM_ALIGN = 4		/* data buffer is in buffer alignment mode */
++} data_buffer_mode_e;
++#endif //DWC_UTE_CFI
++
++/** Macros defined for DWC OTG HW Release version */
++
++#define OTG_CORE_REV_2_60a	0x4F54260A
++#define OTG_CORE_REV_2_71a	0x4F54271A
++#define OTG_CORE_REV_2_72a	0x4F54272A
++#define OTG_CORE_REV_2_80a	0x4F54280A
++#define OTG_CORE_REV_2_81a	0x4F54281A
++#define OTG_CORE_REV_2_90a	0x4F54290A
++#define OTG_CORE_REV_2_91a	0x4F54291A
++#define OTG_CORE_REV_2_92a	0x4F54292A
++#define OTG_CORE_REV_2_93a	0x4F54293A
++#define OTG_CORE_REV_2_94a	0x4F54294A
++#define OTG_CORE_REV_3_00a	0x4F54300A
++
++/**
++ * Information for each ISOC packet.
++ */
++typedef struct iso_pkt_info {
++	uint32_t offset;
++	uint32_t length;
++	int32_t status;
++} iso_pkt_info_t;
++
++/**
++ * The <code>dwc_ep</code> structure represents the state of a single
++ * endpoint when acting in device mode. It contains the data items
++ * needed for an endpoint to be activated and transfer packets.
++ */
++typedef struct dwc_ep {
++	/** EP number used for register address lookup */
++	uint8_t num;
++	/** EP direction 0 = OUT */
++	unsigned is_in:1;
++	/** EP active. */
++	unsigned active:1;
++
++	/**
++	 * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic 
++	 * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/
++	unsigned tx_fifo_num:4;
++	/** EP type: 0 - Control, 1 - ISOC,	 2 - BULK,	3 - INTR */
++	unsigned type:2;
++#define DWC_OTG_EP_TYPE_CONTROL	   0
++#define DWC_OTG_EP_TYPE_ISOC	   1
++#define DWC_OTG_EP_TYPE_BULK	   2
++#define DWC_OTG_EP_TYPE_INTR	   3
++
++	/** DATA start PID for INTR and BULK EP */
++	unsigned data_pid_start:1;
++	/** Frame (even/odd) for ISOC EP */
++	unsigned even_odd_frame:1;
++	/** Max Packet bytes */
++	unsigned maxpacket:11;
++
++	/** Max Transfer size */
++	uint32_t maxxfer;
++
++	/** @name Transfer state */
++	/** @{ */
++
++	/**
++	 * Pointer to the beginning of the transfer buffer -- do not modify
++	 * during transfer.
++	 */
++
++	dwc_dma_t dma_addr;
++
++	dwc_dma_t dma_desc_addr;
++	dwc_otg_dev_dma_desc_t *desc_addr;
++
++	uint8_t *start_xfer_buff;
++	/** pointer to the transfer buffer */
++	uint8_t *xfer_buff;
++	/** Number of bytes to transfer */
++	unsigned xfer_len:19;
++	/** Number of bytes transferred. */
++	unsigned xfer_count:19;
++	/** Sent ZLP */
++	unsigned sent_zlp:1;
++	/** Total len for control transfer */
++	unsigned total_len:19;
++
++	/** stall clear flag */
++	unsigned stall_clear_flag:1;
++
++	/** SETUP pkt cnt rollover flag for EP0 out*/
++	unsigned stp_rollover;
++
++#ifdef DWC_UTE_CFI
++	/* The buffer mode */
++	data_buffer_mode_e buff_mode;
++
++	/* The chain of DMA descriptors.
++	 * MAX_DMA_DESCS_PER_EP will be allocated for each active EP.
++	 */
++	dwc_otg_dma_desc_t *descs;
++
++	/* The DMA address of the descriptors chain start */
++	dma_addr_t descs_dma_addr;
++	/** This variable stores the length of the last enqueued request */
++	uint32_t cfi_req_len;
++#endif				//DWC_UTE_CFI
++
++/** Max DMA Descriptor count for any EP */
++#define MAX_DMA_DESC_CNT 256
++	/** Allocated DMA Desc count */
++	uint32_t desc_cnt;
++	
++	/** bInterval */
++	uint32_t bInterval;
++	/** Next frame num to setup next ISOC transfer */
++	uint32_t frame_num;
++	/** Indicates SOF number overrun in DSTS */
++	uint8_t frm_overrun;
++
++#ifdef DWC_UTE_PER_IO
++	/** Next frame num for which will be setup DMA Desc */
++	uint32_t xiso_frame_num;
++	/** bInterval */
++	uint32_t xiso_bInterval;
++	/** Count of currently active transfers - shall be either 0 or 1 */
++	int xiso_active_xfers;
++	int xiso_queued_xfers;
++#endif
++#ifdef DWC_EN_ISOC
++	/**
++	 * Variables specific for ISOC EPs
++	 *
++	 */
++	/** DMA addresses of ISOC buffers */
++	dwc_dma_t dma_addr0;
++	dwc_dma_t dma_addr1;
++
++	dwc_dma_t iso_dma_desc_addr;
++	dwc_otg_dev_dma_desc_t *iso_desc_addr;
++
++	/** pointer to the transfer buffers */
++	uint8_t *xfer_buff0;
++	uint8_t *xfer_buff1;
++
++	/** number of ISOC Buffer is processing */
++	uint32_t proc_buf_num;
++	/** Interval of ISOC Buffer processing */
++	uint32_t buf_proc_intrvl;
++	/** Data size for regular frame */
++	uint32_t data_per_frame;
++
++	/* todo - pattern data support is to be implemented in the future */
++	/** Data size for pattern frame */
++	uint32_t data_pattern_frame;
++	/** Frame number of pattern data */
++	uint32_t sync_frame;
++
++	/** bInterval */
++	uint32_t bInterval;
++	/** ISO Packet number per frame */
++	uint32_t pkt_per_frm;
++	/** Next frame num for which will be setup DMA Desc */
++	uint32_t next_frame;
++	/** Number of packets per buffer processing */
++	uint32_t pkt_cnt;
++	/** Info for all isoc packets */
++	iso_pkt_info_t *pkt_info;
++	/** current pkt number */
++	uint32_t cur_pkt;
++	/** current pkt number */
++	uint8_t *cur_pkt_addr;
++	/** current pkt number */
++	uint32_t cur_pkt_dma_addr;
++#endif				/* DWC_EN_ISOC */
++
++/** @} */
++} dwc_ep_t;
++
++/*
++ * Reasons for halting a host channel.
++ */
++typedef enum dwc_otg_halt_status {
++	DWC_OTG_HC_XFER_NO_HALT_STATUS,
++	DWC_OTG_HC_XFER_COMPLETE,
++	DWC_OTG_HC_XFER_URB_COMPLETE,
++	DWC_OTG_HC_XFER_ACK,
++	DWC_OTG_HC_XFER_NAK,
++	DWC_OTG_HC_XFER_NYET,
++	DWC_OTG_HC_XFER_STALL,
++	DWC_OTG_HC_XFER_XACT_ERR,
++	DWC_OTG_HC_XFER_FRAME_OVERRUN,
++	DWC_OTG_HC_XFER_BABBLE_ERR,
++	DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
++	DWC_OTG_HC_XFER_AHB_ERR,
++	DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
++	DWC_OTG_HC_XFER_URB_DEQUEUE
++} dwc_otg_halt_status_e;
++
++/**
++ * Host channel descriptor. This structure represents the state of a single
++ * host channel when acting in host mode. It contains the data items needed to
++ * transfer packets to an endpoint via a host channel.
++ */
++typedef struct dwc_hc {
++	/** Host channel number used for register address lookup */
++	uint8_t hc_num;
++
++	/** Device to access */
++	unsigned dev_addr:7;
++
++	/** EP to access */
++	unsigned ep_num:4;
++
++	/** EP direction. 0: OUT, 1: IN */
++	unsigned ep_is_in:1;
++
++	/**
++	 * EP speed.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	unsigned speed:2;
++#define DWC_OTG_EP_SPEED_LOW	0
++#define DWC_OTG_EP_SPEED_FULL	1
++#define DWC_OTG_EP_SPEED_HIGH	2
++
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_TYPE_CONTROL: 0
++	 *	- DWC_OTG_EP_TYPE_ISOC: 1
++	 *	- DWC_OTG_EP_TYPE_BULK: 2
++	 *	- DWC_OTG_EP_TYPE_INTR: 3
++	 */
++	unsigned ep_type:2;
++
++	/** Max packet size in bytes */
++	unsigned max_packet:11;
++
++	/**
++	 * PID for initial transaction.
++	 * 0: DATA0,<br>
++	 * 1: DATA2,<br>
++	 * 2: DATA1,<br>
++	 * 3: MDATA (non-Control EP),
++	 *	  SETUP (Control EP)
++	 */
++	unsigned data_pid_start:2;
++#define DWC_OTG_HC_PID_DATA0 0
++#define DWC_OTG_HC_PID_DATA2 1
++#define DWC_OTG_HC_PID_DATA1 2
++#define DWC_OTG_HC_PID_MDATA 3
++#define DWC_OTG_HC_PID_SETUP 3
++
++	/** Number of periodic transactions per (micro)frame */
++	unsigned multi_count:2;
++
++	/** @name Transfer State */
++	/** @{ */
++
++	/** Pointer to the current transfer buffer position. */
++	uint8_t *xfer_buff;
++	/**
++	 * In Buffer DMA mode this buffer will be used
++	 * if xfer_buff is not DWORD aligned.
++	 */
++	dwc_dma_t align_buff;
++	/** Total number of bytes to transfer. */
++	uint32_t xfer_len;
++	/** Number of bytes transferred so far. */
++	uint32_t xfer_count;
++	/** Packet count at start of transfer.*/
++	uint16_t start_pkt_count;
++
++	/**
++	 * Flag to indicate whether the transfer has been started. Set to 1 if
++	 * it has been started, 0 otherwise.
++	 */
++	uint8_t xfer_started;
++
++	/**
++	 * Set to 1 to indicate that a PING request should be issued on this
++	 * channel. If 0, process normally.
++	 */
++	uint8_t do_ping;
++
++	/**
++	 * Set to 1 to indicate that the error count for this transaction is
++	 * non-zero. Set to 0 if the error count is 0.
++	 */
++	uint8_t error_state;
++
++	/**
++	 * Set to 1 to indicate that this channel should be halted the next
++	 * time a request is queued for the channel. This is necessary in
++	 * slave mode if no request queue space is available when an attempt
++	 * is made to halt the channel.
++	 */
++	uint8_t halt_on_queue;
++
++	/**
++	 * Set to 1 if the host channel has been halted, but the core is not
++	 * finished flushing queued requests. Otherwise 0.
++	 */
++	uint8_t halt_pending;
++
++	/**
++	 * Reason for halting the host channel.
++	 */
++	dwc_otg_halt_status_e halt_status;
++
++	/*
++	 * Split settings for the host channel
++	 */
++	uint8_t do_split;		   /**< Enable split for the channel */
++	uint8_t complete_split;	   /**< Enable complete split */
++	uint8_t hub_addr;		   /**< Address of high speed hub */
++
++	uint8_t port_addr;		   /**< Port of the low/full speed device */
++	/** Split transaction position
++	 * One of the following values:
++	 *	  - DWC_HCSPLIT_XACTPOS_MID
++	 *	  - DWC_HCSPLIT_XACTPOS_BEGIN
++	 *	  - DWC_HCSPLIT_XACTPOS_END
++	 *	  - DWC_HCSPLIT_XACTPOS_ALL */
++	uint8_t xact_pos;
++
++	/** Set when the host channel does a short read. */
++	uint8_t short_read;
++
++	/**
++	 * Number of requests issued for this channel since it was assigned to
++	 * the current transfer (not counting PINGs).
++	 */
++	uint8_t requests;
++
++	/**
++	 * Queue Head for the transfer being processed by this channel.
++	 */
++	struct dwc_otg_qh *qh;
++
++	/** @} */
++
++	/** Entry in list of host channels. */
++	 DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry;
++
++	/** @name Descriptor DMA support */
++	/** @{ */
++
++	/** Number of Transfer Descriptors */
++	uint16_t ntd;
++
++	/** Descriptor List DMA address */
++	dwc_dma_t desc_list_addr;
++
++	/** Scheduling micro-frame bitmap. */
++	uint8_t schinfo;
++
++	/** @} */
++} dwc_hc_t;
++
++/**
++ * The following parameters may be specified when starting the module. These
++ * parameters define how the DWC_otg controller should be configured.
++ */
++typedef struct dwc_otg_core_params {
++	int32_t opt;
++
++	/**
++	 * Specifies the OTG capabilities. The driver will automatically
++	 * detect the value for this parameter if none is specified.
++	 * 0 - HNP and SRP capable (default)
++	 * 1 - SRP Only capable
++	 * 2 - No HNP/SRP capable
++	 */
++	int32_t otg_cap;
++
++	/**
++	 * Specifies whether to use slave or DMA mode for accessing the data
++	 * FIFOs. The driver will automatically detect the value for this
++	 * parameter if none is specified.
++	 * 0 - Slave
++	 * 1 - DMA (default, if available)
++	 */
++	int32_t dma_enable;
++
++	/**
++	 * When DMA mode is enabled specifies whether to use address DMA or DMA 
++	 * Descriptor mode for accessing the data FIFOs in device mode. The driver 
++	 * will automatically detect the value for this if none is specified.
++	 * 0 - address DMA
++	 * 1 - DMA Descriptor(default, if available)
++	 */
++	int32_t dma_desc_enable;
++	/** The DMA Burst size (applicable only for External DMA
++	 * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++	 */
++	int32_t dma_burst_size;	/* Translate this to GAHBCFG values */
++
++	/**
++	 * Specifies the maximum speed of operation in host and device mode.
++	 * The actual speed depends on the speed of the attached device and
++	 * the value of phy_type. The actual speed depends on the speed of the
++	 * attached device.
++	 * 0 - High Speed (default)
++	 * 1 - Full Speed
++	 */
++	int32_t speed;
++	/** Specifies whether low power mode is supported when attached
++	 *	to a Full Speed or Low Speed device in host mode.
++	 * 0 - Don't support low power mode (default)
++	 * 1 - Support low power mode
++	 */
++	int32_t host_support_fs_ls_low_power;
++
++	/** Specifies the PHY clock rate in low power mode when connected to a
++	 * Low Speed device in host mode. This parameter is applicable only if
++	 * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
++	 * then defaults to 6 MHZ otherwise 48 MHZ.
++	 *
++	 * 0 - 48 MHz
++	 * 1 - 6 MHz
++	 */
++	int32_t host_ls_low_power_phy_clk;
++
++	/**
++	 * 0 - Use cC FIFO size parameters
++	 * 1 - Allow dynamic FIFO sizing (default)
++	 */
++	int32_t enable_dynamic_fifo;
++
++	/** Total number of 4-byte words in the data FIFO memory. This
++	 * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++	 * Tx FIFOs.
++	 * 32 to 32768 (default 8192)
++	 * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++	 */
++	int32_t data_fifo_size;
++
++	/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1064)
++	 */
++	int32_t dev_rx_fifo_size;
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++	 * when dynamic FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t dev_nperio_tx_fifo_size;
++
++	/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++	/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_rx_fifo_size;
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++	 * when Dynamic FIFO sizing is enabled in the core.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_nperio_tx_fifo_size;
++
++	/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_perio_tx_fifo_size;
++
++	/** The maximum transfer size supported in bytes.
++	 * 2047 to 65,535  (default 65,535)
++	 */
++	int32_t max_transfer_size;
++
++	/** The maximum number of packets in a transfer.
++	 * 15 to 511  (default 511)
++	 */
++	int32_t max_packet_count;
++
++	/** The number of host channel registers to use.
++	 * 1 to 16 (default 12)
++	 * Note: The FPGA configuration supports a maximum of 12 host channels.
++	 */
++	int32_t host_channels;
++
++	/** The number of endpoints in addition to EP0 available for device
++	 * mode operations.
++	 * 1 to 15 (default 6 IN and OUT)
++	 * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++	 * endpoints in addition to EP0.
++	 */
++	int32_t dev_endpoints;
++
++		/**
++		 * Specifies the type of PHY interface to use. By default, the driver
++		 * will automatically detect the phy_type.
++		 *
++		 * 0 - Full Speed PHY
++		 * 1 - UTMI+ (default)
++		 * 2 - ULPI
++		 */
++	int32_t phy_type;
++
++	/**
++	 * Specifies the UTMI+ Data Width. This parameter is
++	 * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++	 * PHY_TYPE, this parameter indicates the data width between
++	 * the MAC and the ULPI Wrapper.) Also, this parameter is
++	 * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++	 * to "8 and 16 bits", meaning that the core has been
++	 * configured to work at either data path width.
++	 *
++	 * 8 or 16 bits (default 16)
++	 */
++	int32_t phy_utmi_width;
++
++	/**
++	 * Specifies whether the ULPI operates at double or single
++	 * data rate. This parameter is only applicable if PHY_TYPE is
++	 * ULPI.
++	 *
++	 * 0 - single data rate ULPI interface with 8 bit wide data
++	 * bus (default)
++	 * 1 - double data rate ULPI interface with 4 bit wide data
++	 * bus
++	 */
++	int32_t phy_ulpi_ddr;
++
++	/**
++	 * Specifies whether to use the internal or external supply to
++	 * drive the vbus with a ULPI phy.
++	 */
++	int32_t phy_ulpi_ext_vbus;
++
++	/**
++	 * Specifies whether to use the I2Cinterface for full speed PHY. This
++	 * parameter is only applicable if PHY_TYPE is FS.
++	 * 0 - No (default)
++	 * 1 - Yes
++	 */
++	int32_t i2c_enable;
++
++	int32_t ulpi_fs_ls;
++
++	int32_t ts_dline;
++
++	/**
++	 * Specifies whether dedicated transmit FIFOs are
++	 * enabled for non periodic IN endpoints in device mode
++	 * 0 - No
++	 * 1 - Yes
++	 */
++	int32_t en_multiple_tx_fifo;
++
++	/** Number of 4-byte words in each of the Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flag-
++	 * bit 0 - enable non-ISO Tx thresholding
++	 * bit 1 - enable ISO Tx thresholding
++	 * bit 2 - enable Rx thresholding
++	 */
++	uint32_t thr_ctl;
++
++	/** Thresholding length for Tx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t tx_thr_length;
++
++	/** Thresholding length for Rx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t rx_thr_length;
++
++	/**
++	 * Specifies whether LPM (Link Power Management) support is enabled
++	 */
++	int32_t lpm_enable;
++
++	/** Per Transfer Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t pti_enable;
++
++	/** Multi Processor Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t mpi_enable;
++
++	/** IS_USB Capability
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t ic_usb_cap;
++
++	/** AHB Threshold Ratio
++	 * 2'b00 AHB Threshold = 	MAC Threshold
++	 * 2'b01 AHB Threshold = 1/2 	MAC Threshold
++	 * 2'b10 AHB Threshold = 1/4	MAC Threshold
++	 * 2'b11 AHB Threshold = 1/8	MAC Threshold
++	 */
++	int32_t ahb_thr_ratio;
++
++	/** ADP Support
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t adp_supp_enable;
++
++	/** HFIR Reload Control
++	 * 0 - The HFIR cannot be reloaded dynamically.
++	 * 1 - Allow dynamic reloading of the HFIR register during runtime.
++	 */
++	int32_t reload_ctl;
++
++	/** DCFG: Enable device Out NAK 
++	 * 0 - The core does not set NAK after Bulk Out transfer complete.
++	 * 1 - The core sets NAK after Bulk OUT transfer complete.
++	 */
++	int32_t dev_out_nak;
++
++	/** DCFG: Enable Continue on BNA 
++	 * After receiving BNA interrupt the core disables the endpoint,when the
++	 * endpoint is re-enabled by the application the core starts processing 
++	 * 0 - from the DOEPDMA descriptor
++	 * 1 - from the descriptor which received the BNA.
++	 */
++	int32_t cont_on_bna;
++
++	/** GAHBCFG: AHB Single Support 
++	 * This bit when programmed supports SINGLE transfers for remainder 
++	 * data in a transfer for DMA mode of operation.
++	 * 0 - in this case the remainder data will be sent using INCR burst size.
++	 * 1 - in this case the remainder data will be sent using SINGLE burst size.
++	 */
++	int32_t ahb_single;
++
++	/** Core Power down mode
++	 * 0 - No Power Down is enabled
++	 * 1 - Reserved
++	 * 2 - Complete Power Down (Hibernation)
++	 */
++	int32_t power_down;
++
++	/** OTG revision supported
++	 * 0 - OTG 1.3 revision
++	 * 1 - OTG 2.0 revision
++	 */
++	int32_t otg_ver;
++
++} dwc_otg_core_params_t;
++
++#ifdef DEBUG
++struct dwc_otg_core_if;
++typedef struct hc_xfer_info {
++	struct dwc_otg_core_if *core_if;
++	dwc_hc_t *hc;
++} hc_xfer_info_t;
++#endif
++
++typedef struct ep_xfer_info {
++	struct dwc_otg_core_if *core_if;
++	dwc_ep_t *ep;
++	uint8_t state;
++} ep_xfer_info_t;
++/*
++ * Device States
++ */
++typedef enum dwc_otg_lx_state {
++	/** On state */
++	DWC_OTG_L0,
++	/** LPM sleep state*/
++	DWC_OTG_L1,
++	/** USB suspend state*/
++	DWC_OTG_L2,
++	/** Off state*/
++	DWC_OTG_L3
++} dwc_otg_lx_state_e;
++
++struct dwc_otg_global_regs_backup {
++	uint32_t gotgctl_local;
++	uint32_t gintmsk_local;
++	uint32_t gahbcfg_local;
++	uint32_t gusbcfg_local;
++	uint32_t grxfsiz_local;
++	uint32_t gnptxfsiz_local;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	uint32_t glpmcfg_local;
++#endif
++	uint32_t gi2cctl_local;
++	uint32_t hptxfsiz_local;
++	uint32_t pcgcctl_local;
++	uint32_t gdfifocfg_local;
++	uint32_t dtxfsiz_local[MAX_EPS_CHANNELS];
++	uint32_t gpwrdn_local;
++	uint32_t xhib_pcgcctl;
++	uint32_t xhib_gpwrdn;
++};
++
++struct dwc_otg_host_regs_backup {
++	uint32_t hcfg_local;
++	uint32_t haintmsk_local;
++	uint32_t hcintmsk_local[MAX_EPS_CHANNELS];
++	uint32_t hprt0_local;
++	uint32_t hfir_local;
++};
++
++struct dwc_otg_dev_regs_backup {
++	uint32_t dcfg;
++	uint32_t dctl;
++	uint32_t daintmsk;
++	uint32_t diepmsk;
++	uint32_t doepmsk;
++	uint32_t diepctl[MAX_EPS_CHANNELS];
++	uint32_t dieptsiz[MAX_EPS_CHANNELS];
++	uint32_t diepdma[MAX_EPS_CHANNELS];
++};
++/**
++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
++ * the DWC_otg controller acting in either host or device mode. It
++ * represents the programming view of the controller as a whole.
++ */
++struct dwc_otg_core_if {
++	/** Parameters that define how the core should be configured.*/
++	dwc_otg_core_params_t *core_params;
++
++	/** Core Global registers starting at offset 000h. */
++	dwc_otg_core_global_regs_t *core_global_regs;
++
++	/** Device-specific information */
++	dwc_otg_dev_if_t *dev_if;
++	/** Host-specific information */
++	dwc_otg_host_if_t *host_if;
++
++	/** Value from SNPSID register */
++	uint32_t snpsid;
++
++	/*
++	 * Set to 1 if the core PHY interface bits in USBCFG have been
++	 * initialized.
++	 */
++	uint8_t phy_init_done;
++
++	/*
++	 * SRP Success flag, set by srp success interrupt in FS I2C mode
++	 */
++	uint8_t srp_success;
++	uint8_t srp_timer_started;
++	/** Timer for SRP. If it expires before SRP is successful
++	 * clear the SRP. */
++	dwc_timer_t *srp_timer;
++
++#ifdef DWC_DEV_SRPCAP
++	/* This timer is needed to power on the hibernated host core if SRP is not
++	 * initiated on connected SRP capable device for limited period of time
++	 */
++	uint8_t pwron_timer_started;
++	dwc_timer_t *pwron_timer;
++#endif
++	/* Common configuration information */
++	/** Power and Clock Gating Control Register */
++	volatile uint32_t *pcgcctl;
++#define DWC_OTG_PCGCCTL_OFFSET 0xE00
++
++	/** Push/pop addresses for endpoints or host channels.*/
++	uint32_t *data_fifo[MAX_EPS_CHANNELS];
++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
++#define DWC_OTG_DATA_FIFO_SIZE 0x1000
++
++	/** Total RAM for FIFOs (Bytes) */
++	uint16_t total_fifo_size;
++	/** Size of Rx FIFO (Bytes) */
++	uint16_t rx_fifo_size;
++	/** Size of Non-periodic Tx FIFO (Bytes) */
++	uint16_t nperio_tx_fifo_size;
++
++	/** 1 if DMA is enabled, 0 otherwise. */
++	uint8_t dma_enable;
++
++	/** 1 if DMA descriptor is enabled, 0 otherwise. */
++	uint8_t dma_desc_enable;
++
++	/** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t pti_enh_enable;
++
++	/** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t multiproc_int_enable;
++
++	/** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
++	uint8_t en_multiple_tx_fifo;
++
++	/** Set to 1 if multiple packets of a high-bandwidth transfer is in
++	 * process of being queued */
++	uint8_t queuing_high_bandwidth;
++
++	/** Hardware Configuration -- stored here for convenience.*/
++	hwcfg1_data_t hwcfg1;
++	hwcfg2_data_t hwcfg2;
++	hwcfg3_data_t hwcfg3;
++	hwcfg4_data_t hwcfg4;
++	fifosize_data_t hptxfsiz;
++
++	/** Host and Device Configuration -- stored here for convenience.*/
++	hcfg_data_t hcfg;
++	dcfg_data_t dcfg;
++
++	/** The operational State, during transations
++	 * (a_host>>a_peripherial and b_device=>b_host) this may not
++	 * match the core but allows the software to determine
++	 * transitions.
++	 */
++	uint8_t op_state;
++
++	/**
++	 * Set to 1 if the HCD needs to be restarted on a session request
++	 * interrupt. This is required if no connector ID status change has
++	 * occurred since the HCD was last disconnected.
++	 */
++	uint8_t restart_hcd_on_session_req;
++
++	/** HCD callbacks */
++	/** A-Device is a_host */
++#define A_HOST		(1)
++	/** A-Device is a_suspend */
++#define A_SUSPEND	(2)
++	/** A-Device is a_peripherial */
++#define A_PERIPHERAL	(3)
++	/** B-Device is operating as a Peripheral. */
++#define B_PERIPHERAL	(4)
++	/** B-Device is operating as a Host. */
++#define B_HOST		(5)
++
++	/** HCD callbacks */
++	struct dwc_otg_cil_callbacks *hcd_cb;
++	/** PCD callbacks */
++	struct dwc_otg_cil_callbacks *pcd_cb;
++
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t p_tx_msk;
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t tx_msk;
++
++	/** Workqueue object used for handling several interrupts */
++	dwc_workq_t *wq_otg;
++
++	/** Timer object used for handling "Wakeup Detected" Interrupt */
++	dwc_timer_t *wkp_timer;
++	/** This arrays used for debug purposes for DEV OUT NAK enhancement */
++	uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS];
++	ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS];
++	dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS];
++#ifdef DEBUG
++	uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
++
++	hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
++	dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS];
++
++	uint32_t hfnum_7_samples;
++	uint64_t hfnum_7_frrem_accum;
++	uint32_t hfnum_0_samples;
++	uint64_t hfnum_0_frrem_accum;
++	uint32_t hfnum_other_samples;
++	uint64_t hfnum_other_frrem_accum;
++#endif
++
++#ifdef DWC_UTE_CFI
++	uint16_t pwron_rxfsiz;
++	uint16_t pwron_gnptxfsiz;
++	uint16_t pwron_txfsiz[15];
++
++	uint16_t init_rxfsiz;
++	uint16_t init_gnptxfsiz;
++	uint16_t init_txfsiz[15];
++#endif
++
++	/** Lx state of device */
++	dwc_otg_lx_state_e lx_state;
++
++	/** Saved Core Global registers */
++	struct dwc_otg_global_regs_backup *gr_backup;
++	/** Saved Host registers */
++	struct dwc_otg_host_regs_backup *hr_backup;
++	/** Saved Device registers */
++	struct dwc_otg_dev_regs_backup *dr_backup;
++
++	/** Power Down Enable */
++	uint32_t power_down;
++
++	/** ADP support Enable */
++	uint32_t adp_enable;
++
++	/** ADP structure object */
++	dwc_otg_adp_t adp;
++
++	/** hibernation/suspend flag */
++	int hibernation_suspend;
++
++	/** Device mode extended hibernation flag */
++	int xhib;
++
++	/** OTG revision supported */
++	uint32_t otg_ver;
++
++	/** OTG status flag used for HNP polling */
++	uint8_t otg_sts;
++
++	/** Pointer to either hcd->lock or pcd->lock */
++	dwc_spinlock_t *lock;
++
++	/** Start predict NextEP based on Learning Queue if equal 1,
++	 * also used as counter of disabled NP IN EP's */
++	uint8_t start_predict;
++
++	/** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and 
++	 * active, 0xff otherwise */
++	uint8_t nextep_seq[MAX_EPS_CHANNELS];
++
++	/** Index of fisrt EP in nextep_seq array which should be re-enabled **/
++	uint8_t first_in_nextep_seq;
++
++	/** Frame number while entering to ISR - needed for ISOCs **/
++	uint32_t frame_num; 
++
++};
++
++#ifdef DEBUG
++/*
++ * This function is called when transfer is timed out.
++ */
++extern void hc_xfer_timeout(void *ptr);
++#endif
++
++/*
++ * This function is called when transfer is timed out on endpoint.
++ */
++extern void ep_xfer_timeout(void *ptr);
++
++/*
++ * The following functions are functions for works
++ * using during handling some interrupts
++ */
++extern void w_conn_id_status_change(void *p);
++
++extern void w_wakeup_detected(void *p);
++
++/** Saves global register values into system memory. */
++extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if);
++/** Saves device register values into system memory. */
++extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if);
++/** Saves host register values into system memory. */
++extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if);
++/** Restore global register values. */
++extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if);
++/** Restore host register values. */
++extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset);
++/** Restore device register values. */
++extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if,
++				    int rem_wakeup);
++extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if);
++extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode,
++				  int is_host);
++
++extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if,
++					    int restore_mode, int reset);
++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
++					      int rem_wakeup, int reset);
++
++/*
++ * The following functions support initialization of the CIL driver component
++ * and the DWC_otg controller.
++ */
++extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if);
++
++/** @name Device CIL Functions
++ * The following functions support managing the DWC_otg controller in device
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if,
++				      uint32_t * _dest);
++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if,
++				      dwc_ep_t * _ep);
++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if,
++					 dwc_ep_t * _ep);
++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if,
++				       dwc_ep_t * _ep);
++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if,
++					  dwc_ep_t * _ep);
++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if,
++				    dwc_ep_t * _ep, int _dma);
++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if,
++				   dwc_ep_t * _ep);
++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if);
++
++#ifdef DWC_EN_ISOC
++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if,
++					      dwc_ep_t * ep);
++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if,
++					      dwc_ep_t * ep);
++#endif /* DWC_EN_ISOC */
++/**@}*/
++
++/** @name Host CIL Functions
++ * The following functions support managing the DWC_otg controller in host
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
++extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if,
++			    dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status);
++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if,
++				      dwc_hc_t * _hc);
++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if,
++					dwc_hc_t * _hc);
++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if,
++				    dwc_hc_t * _hc);
++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if);
++
++extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if,
++					   dwc_hc_t * hc);
++
++extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if);
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcint_data_t hcint_clear = {.d32 = 0}; \
++	hcint_clear.b._intr_ = 1; \
++	DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \
++} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcintmsk_data_t hcintmsk = {.d32 = 0}; \
++	hcintmsk.b._intr_ = 1; \
++	DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
++} while (0)
++
++/**
++ * This function Reads HPRT0 in preparation to modify. It keeps the
++ * WC bits 0 so that if they are read as 1, they won't clear when you
++ * write it back
++ */
++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0);
++	hprt0.b.prtena = 0;
++	hprt0.b.prtconndet = 0;
++	hprt0.b.prtenchng = 0;
++	hprt0.b.prtovrcurrchng = 0;
++	return hprt0.d32;
++}
++
++/**@}*/
++
++/** @name Common CIL Functions
++ * The following functions support managing the DWC_otg controller in either
++ * device or host mode.
++ */
++/**@{*/
++
++extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if,
++				uint8_t * dest, uint16_t bytes);
++
++extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num);
++extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if);
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if)
++{
++	return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) &
++		DWC_READ_REG32(&core_if->core_global_regs->gintmsk));
++}
++
++/**
++ * This function returns the OTG Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if)
++{
++	return (DWC_READ_REG32(&core_if->core_global_regs->gotgint));
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the IN endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *
++						       core_if)
++{
++
++	uint32_t v;
++
++	if (core_if->multiproc_int_enable) {
++		v = DWC_READ_REG32(&core_if->dev_if->
++				   dev_global_regs->deachint) &
++		    DWC_READ_REG32(&core_if->
++				   dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) &
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++	return (v & 0xffff);
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the OUT endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *
++							core_if)
++{
++	uint32_t v;
++
++	if (core_if->multiproc_int_enable) {
++		v = DWC_READ_REG32(&core_if->dev_if->
++				   dev_global_regs->deachint) &
++		    DWC_READ_REG32(&core_if->
++				   dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) &
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++
++	return ((v & 0xffff0000) >> 16);
++}
++
++/**
++ * This function returns the Device IN EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if,
++						   dwc_ep_t * ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	uint32_t v, msk, emp;
++
++	if (core_if->multiproc_int_enable) {
++		msk =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->diepeachintmsk[ep->num]);
++		emp =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	} else {
++		msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk);
++		emp =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	}
++
++	return v;
++}
++
++/**
++ * This function returns the Device OUT EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *
++						    _core_if, dwc_ep_t * _ep)
++{
++	dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	uint32_t v;
++	doepmsk_data_t msk = {.d32 = 0 };
++
++	if (_core_if->multiproc_int_enable) {
++		msk.d32 =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->doepeachintmsk[_ep->num]);
++		if (_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = DWC_READ_REG32(&dev_if->
++				   out_ep_regs[_ep->num]->doepint) & msk.d32;
++	} else {
++		msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk);
++		if (_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = DWC_READ_REG32(&dev_if->
++				   out_ep_regs[_ep->num]->doepint) & msk.d32;
++	}
++	return v;
++}
++
++/**
++ * This function returns the Host All Channel Interrupt register
++ */
++static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t *
++							   _core_if)
++{
++	return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint));
++}
++
++static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t *
++						      _core_if, dwc_hc_t * _hc)
++{
++	return (DWC_READ_REG32
++		(&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
++}
++
++/**
++ * This function returns the mode of the operation, host or device.
++ *
++ * @return 0 - Device Mode, 1 - Host Mode
++ */
++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if)
++{
++	return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1);
++}
++
++/**@}*/
++
++/**
++ * DWC_otg CIL callback structure. This structure allows the HCD and
++ * PCD to register functions used for starting and stopping the PCD
++ * and HCD for role change on for a DRD.
++ */
++typedef struct dwc_otg_cil_callbacks {
++	/** Start function for role change */
++	int (*start) (void *_p);
++	/** Stop Function for role change */
++	int (*stop) (void *_p);
++	/** Disconnect Function for role change */
++	int (*disconnect) (void *_p);
++	/** Resume/Remote wakeup Function */
++	int (*resume_wakeup) (void *_p);
++	/** Suspend function */
++	int (*suspend) (void *_p);
++	/** Session Start (SRP) */
++	int (*session_start) (void *_p);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	/** Sleep (switch to L0 state) */
++	int (*sleep) (void *_p);
++#endif
++	/** Pointer passed to start() and stop() */
++	void *p;
++} dwc_otg_cil_callbacks_t;
++
++extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if,
++					       dwc_otg_cil_callbacks_t * _cb,
++					       void *_p);
++extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if,
++					       dwc_otg_cil_callbacks_t * _cb,
++					       void *_p);
++
++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if);
++
++//////////////////////////////////////////////////////////////////////
++/** Start the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_start(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->start) {
++		core_if->hcd_cb->start(core_if->hcd_cb->p);
++	}
++}
++
++/** Stop the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->stop) {
++		core_if->hcd_cb->stop(core_if->hcd_cb->p);
++	}
++}
++
++/** Disconnect the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
++		core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
++	}
++}
++
++/** Inform the HCD the a New Session has begun.  Helper function for
++ * using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
++		core_if->hcd_cb->session_start(core_if->hcd_cb->p);
++	}
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * Inform the HCD about LPM sleep.
++ * Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->sleep) {
++		core_if->hcd_cb->sleep(core_if->hcd_cb->p);
++	}
++}
++#endif
++
++/** Resume the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) {
++		core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p);
++	}
++}
++
++/** Start the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_start(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->start) {
++		core_if->pcd_cb->start(core_if->pcd_cb->p);
++	}
++}
++
++/** Stop the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->stop) {
++		core_if->pcd_cb->stop(core_if->pcd_cb->p);
++	}
++}
++
++/** Suspend the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
++		core_if->pcd_cb->suspend(core_if->pcd_cb->p);
++	}
++}
++
++/** Resume the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++		core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++	}
++}
++
++//////////////////////////////////////////////////////////////////////
++
++#endif
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1571 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
++ * $Revision: #32 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * This file contains the Common Interrupt handlers.
++ */
++#include "dwc_os.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_mphi_fix.h"
++
++extern bool fiq_fix_enable;
++
++#ifdef DEBUG
++inline const char *op_state_str(dwc_otg_core_if_t * core_if)
++{
++	return (core_if->op_state == A_HOST ? "a_host" :
++		(core_if->op_state == A_SUSPEND ? "a_suspend" :
++		 (core_if->op_state == A_PERIPHERAL ? "a_peripheral" :
++		  (core_if->op_state == B_PERIPHERAL ? "b_peripheral" :
++		   (core_if->op_state == B_HOST ? "b_host" : "unknown")))));
++}
++#endif
++
++/** This function will log a debug message
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++	DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
++		 dwc_otg_mode(core_if) ? "Host" : "Device");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.modemismatch = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/**
++ * This function handles the OTG Interrupts. It reads the OTG
++ * Interrupt Register (GOTGINT) to determine what interrupt has
++ * occurred.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gotgint_data_t gotgint;
++	gotgctl_data_t gotgctl;
++	gintmsk_data_t gintmsk;
++	gpwrdn_data_t gpwrdn;
++
++	gotgint.d32 = DWC_READ_REG32(&global_regs->gotgint);
++	gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
++		    op_state_str(core_if));
++
++	if (gotgint.b.sesenddet) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session End Detected++ (%s)\n",
++			    op_state_str(core_if));
++		gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++
++		if (core_if->op_state == B_HOST) {
++			cil_pcd_start(core_if);
++			core_if->op_state = B_PERIPHERAL;
++		} else {
++			/* If not B_HOST and Device HNP still set. HNP
++			 * Did not succeed!*/
++			if (gotgctl.b.devhnpen) {
++				DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
++				__DWC_ERROR("Device Not Connected/Responding!\n");
++			}
++
++			/* If Session End Detected the B-Cable has
++			 * been disconnected. */
++			/* Reset PCD and Gadget driver to a
++			 * clean state. */
++			core_if->lx_state = DWC_OTG_L0;
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_pcd_stop(core_if);
++			DWC_SPINLOCK(core_if->lock);
++
++			if (core_if->adp_enable) {
++				if (core_if->power_down == 2) {
++					gpwrdn.d32 = 0;
++					gpwrdn.b.pwrdnswtch = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, gpwrdn.d32, 0);
++				}
++
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				dwc_otg_adp_sense_start(core_if);
++			}
++		}
++
++		gotgctl.d32 = 0;
++		gotgctl.b.devhnpen = 1;
++		DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++	}
++	if (gotgint.b.sesreqsucstschng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session Reqeust Success Status Change++\n");
++		gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++		if (gotgctl.b.sesreqscs) {
++
++			if ((core_if->core_params->phy_type ==
++			     DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) {
++				core_if->srp_success = 1;
++			} else {
++				DWC_SPINUNLOCK(core_if->lock);
++				cil_pcd_resume(core_if);
++				DWC_SPINLOCK(core_if->lock);
++				/* Clear Session Request */
++				gotgctl.d32 = 0;
++				gotgctl.b.sesreq = 1;
++				DWC_MODIFY_REG32(&global_regs->gotgctl,
++						 gotgctl.d32, 0);
++			}
++		}
++	}
++	if (gotgint.b.hstnegsucstschng) {
++		/* Print statements during the HNP interrupt handling
++		 * can cause it to fail.*/
++		gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++		/* WA for 3.00a- HW is not setting cur_mode, even sometimes
++		 * this does not help*/
++		if (core_if->snpsid >= OTG_CORE_REV_3_00a)
++			dwc_udelay(100);
++		if (gotgctl.b.hstnegscs) {
++			if (dwc_otg_is_host_mode(core_if)) {
++				core_if->op_state = B_HOST;
++				/*
++				 * Need to disable SOF interrupt immediately.
++				 * When switching from device to host, the PCD
++				 * interrupt handler won't handle the
++				 * interrupt if host mode is already set. The
++				 * HCD interrupt handler won't get called if
++				 * the HCD state is HALT. This means that the
++				 * interrupt does not get handled and Linux
++				 * complains loudly.
++				 */
++				gintmsk.d32 = 0;
++				gintmsk.b.sofintr = 1;
++				DWC_MODIFY_REG32(&global_regs->gintmsk,
++						 gintmsk.d32, 0);
++				/* Call callback function with spin lock released */
++				DWC_SPINUNLOCK(core_if->lock);
++				cil_pcd_stop(core_if);
++				/*
++				 * Initialize the Core for Host mode.
++				 */
++				cil_hcd_start(core_if);
++				DWC_SPINLOCK(core_if->lock);
++				core_if->op_state = B_HOST;
++			}
++		} else {
++			gotgctl.d32 = 0;
++			gotgctl.b.hnpreq = 1;
++			gotgctl.b.devhnpen = 1;
++			DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++			DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
++			__DWC_ERROR("Device Not Connected/Responding\n");
++		}
++	}
++	if (gotgint.b.hstnegdet) {
++		/* The disconnect interrupt is set at the same time as
++		 * Host Negotiation Detected.  During the mode
++		 * switch all interrupts are cleared so the disconnect
++		 * interrupt handler will not get executed.
++		 */
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Host Negotiation Detected++ (%s)\n",
++			    (dwc_otg_is_host_mode(core_if) ? "Host" :
++			     "Device"));
++		if (dwc_otg_is_device_mode(core_if)) {
++			DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",
++				    core_if->op_state);
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_hcd_disconnect(core_if);
++			cil_pcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = A_PERIPHERAL;
++		} else {
++			/*
++			 * Need to disable SOF interrupt immediately. When
++			 * switching from device to host, the PCD interrupt
++			 * handler won't handle the interrupt if host mode is
++			 * already set. The HCD interrupt handler won't get
++			 * called if the HCD state is HALT. This means that
++			 * the interrupt does not get handled and Linux
++			 * complains loudly.
++			 */
++			gintmsk.d32 = 0;
++			gintmsk.b.sofintr = 1;
++			DWC_MODIFY_REG32(&global_regs->gintmsk, gintmsk.d32, 0);
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_pcd_stop(core_if);
++			cil_hcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = A_HOST;
++		}
++	}
++	if (gotgint.b.adevtoutchng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "A-Device Timeout Change++\n");
++	}
++	if (gotgint.b.debdone) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n");
++	}
++
++	/* Clear GOTGINT */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, gotgint.d32);
++
++	return 1;
++}
++
++void w_conn_id_status_change(void *p)
++{
++	dwc_otg_core_if_t *core_if = p;
++	uint32_t count = 0;
++	gotgctl_data_t gotgctl = {.d32 = 0 };
++
++	gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
++
++	/* B-Device connector (Device Mode) */
++	if (gotgctl.b.conidsts) {
++		/* Wait for switch to device mode. */
++		while (!dwc_otg_is_device_mode(core_if)) {
++			DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n",
++				   (dwc_otg_is_host_mode(core_if) ? "Host" :
++				    "Peripheral"));
++			dwc_mdelay(100);
++			if (++count > 10000)
++				break;
++		}
++		DWC_ASSERT(++count < 10000,
++			   "Connection id status change timed out");
++		core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_pcd_start(core_if);
++	} else {
++		/* A-Device connector (Host Mode) */
++		while (!dwc_otg_is_host_mode(core_if)) {
++			DWC_PRINTF("Waiting for Host Mode, Mode=%s\n",
++				   (dwc_otg_is_host_mode(core_if) ? "Host" :
++				    "Peripheral"));
++			dwc_mdelay(100);
++			if (++count > 10000)
++				break;
++		}
++		DWC_ASSERT(++count < 10000,
++			   "Connection id status change timed out");
++		core_if->op_state = A_HOST;
++		/*
++		 * Initialize the Core for Host mode.
++		 */
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_hcd_start(core_if);
++	}
++}
++
++/**
++ * This function handles the Connector ID Status Change Interrupt.  It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition. 
++ *
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if)
++{
++
++	/*
++	 * Need to disable SOF interrupt immediately. If switching from device
++	 * to host, the PCD interrupt handler won't handle the interrupt if
++	 * host mode is already set. The HCD interrupt handler won't get
++	 * called if the HCD state is HALT. This means that the interrupt does
++	 * not get handled and Linux complains loudly.
++	 */
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++	gintsts_data_t gintsts = {.d32 = 0 };
++
++	gintmsk.b.sofintr = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	DWC_DEBUGPL(DBG_CIL,
++		    " ++Connector ID Status Change Interrupt++  (%s)\n",
++		    (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"));
++	
++	DWC_SPINUNLOCK(core_if->lock);
++
++	/*
++	 * Need to schedule a work, as there are possible DELAY function calls
++	 * Release lock before scheduling workq as it holds spinlock during scheduling
++	 */
++
++	DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change,
++			   core_if, "connection id status change");
++	DWC_SPINLOCK(core_if->lock);
++
++	/* Set flag and clear interrupt */
++	gintsts.b.conidstschng = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++
++#ifndef DWC_HOST_ONLY
++	DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		DWC_PRINTF("SRP: Device mode\n");
++	} else {
++		hprt0_data_t hprt0;
++		DWC_PRINTF("SRP: Host mode\n");
++
++		/* Turn on the port power bit. */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtpwr = 1;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++		/* Start the Connection timer. So a message can be displayed
++		 * if connect does not occur within 10 seconds. */
++		cil_hcd_session_start(core_if);
++	}
++#endif
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sessreqintr = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++void w_wakeup_detected(void *p)
++{
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p;
++	/*
++	 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++	 * so that OPT tests pass with all PHYs).
++	 */
++	hprt0_data_t hprt0 = {.d32 = 0 };
++#if 0
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	/* Restart the Phy Clock */
++	pcgcctl.b.stoppclk = 1;
++	DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++	dwc_udelay(10);
++#endif //0
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32);
++//      dwc_mdelay(70);
++	hprt0.b.prtres = 0;	/* Resume */
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n",
++		    DWC_READ_REG32(core_if->host_if->hprt0));
++
++	cil_hcd_resume(core_if);
++
++	/** Change to L0 state*/
++	core_if->lx_state = DWC_OTG_L0;
++}
++
++/**
++ * This interrupt indicates that the DWC_otg controller has detected a
++ * resume or remote wakeup sequence. If the DWC_otg controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY,
++		    "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++	DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state);
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		dctl_data_t dctl = {.d32 = 0 };
++		DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
++			    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->
++					   dsts));
++		if (core_if->lx_state == DWC_OTG_L2) {
++#ifdef PARTIAL_POWER_DOWN
++			if (core_if->hwcfg4.b.power_optimiz) {
++				pcgcctl_data_t power = {.d32 = 0 };
++
++				power.d32 = DWC_READ_REG32(core_if->pcgcctl);
++				DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n",
++					    power.d32);
++
++				power.b.stoppclk = 0;
++				DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++
++				power.b.pwrclmp = 0;
++				DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++
++				power.b.rstpdwnmodule = 0;
++				DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++			}
++#endif
++			/* Clear the Remote Wakeup Signaling */
++			dctl.b.rmtwkupsig = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, dctl.d32, 0);
++
++			DWC_SPINUNLOCK(core_if->lock);
++			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++				core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++			}
++			DWC_SPINLOCK(core_if->lock);
++		} else {
++			glpmcfg_data_t lpmcfg;
++			lpmcfg.d32 =
++			    DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++			lpmcfg.b.hird_thres &= (~(1 << 4));
++			DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg,
++					lpmcfg.d32);
++		}
++		/** Change to L0 state*/
++		core_if->lx_state = DWC_OTG_L0;
++	} else {
++		if (core_if->lx_state != DWC_OTG_L1) {
++			pcgcctl_data_t pcgcctl = {.d32 = 0 };
++
++			/* Restart the Phy Clock */
++			pcgcctl.b.stoppclk = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++			DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71);
++		} else {
++			/** Change to L0 state*/
++			core_if->lx_state = DWC_OTG_L0;
++		}
++	}
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.wkupintr = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * Device disconnect.
++ */
++static int32_t dwc_otg_handle_pwrdn_disconnect_intr(dwc_otg_core_if_t *core_if)
++{
++	gpwrdn_data_t gpwrdn = { .d32 = 0 };
++	gpwrdn_data_t gpwrdn_temp = { .d32 = 0 };
++	gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++
++	/* Switch on the voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset the core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Disable power clamps*/
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Remove reset the core signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	core_if->hibernation_suspend = 0;
++
++	/* Disable PMU */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	if (gpwrdn_temp.b.idsts) {
++		core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_pcd_start(core_if);
++	} else {
++		core_if->op_state = A_HOST;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_hcd_start(core_if);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * remote wakeup sequence.
++ */
++static int32_t dwc_otg_handle_pwrdn_wakeup_detected_intr(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	DWC_DEBUGPL(DBG_ANY,
++		    "++Powerdown Remote Wakeup Detected Interrupt++\n");
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (gpwrdn.b.idsts) {	// Device Mode
++		if ((core_if->power_down == 2)
++		    && (core_if->hibernation_suspend == 1)) {
++			dwc_otg_device_hibernation_restore(core_if, 0, 0);
++		}
++	} else {
++		if ((core_if->power_down == 2)
++		    && (core_if->hibernation_suspend == 1)) {
++			dwc_otg_host_hibernation_restore(core_if, 1, 0);
++		}
++	}
++	return 1;
++}
++
++static int32_t dwc_otg_handle_pwrdn_idsts_change(dwc_otg_device_t *otg_dev)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	gpwrdn_data_t gpwrdn_temp = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++
++	DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
++	gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (core_if->power_down == 2) {
++		if (!core_if->hibernation_suspend) {
++			DWC_PRINTF("Already exited from Hibernation\n");
++			return 1;
++		}
++		DWC_DEBUGPL(DBG_ANY, "Exit from hibernation on ID sts change\n");
++		/* Switch on the voltage to the core */
++		gpwrdn.b.pwrdnswtch = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Reset the core */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Disable power clamps */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnclmp = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++		/* Remove reset the core signal */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		dwc_udelay(10);
++
++		/* Disable PMU interrupt */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++		/*Indicates that we are exiting from hibernation */
++		core_if->hibernation_suspend = 0;
++
++		/* Disable PMU */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuactv = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		gpwrdn.d32 = core_if->gr_backup->gpwrdn_local;
++		if (gpwrdn.b.dis_vbus == 1) {
++			gpwrdn.d32 = 0;
++			gpwrdn.b.dis_vbus = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		}
++
++		if (gpwrdn_temp.b.idsts) {
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++		} else {
++			core_if->op_state = A_HOST;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_hcd_start(core_if);
++		}
++	}
++
++	if (core_if->adp_enable) {
++		uint8_t is_host = 0;
++		DWC_SPINUNLOCK(core_if->lock);
++		/* Change the core_if's lock to hcd/pcd lock depend on mode? */
++#ifndef DWC_HOST_ONLY		
++		if (gpwrdn_temp.b.idsts)
++			core_if->lock = otg_dev->pcd->lock;
++#endif
++#ifndef DWC_DEVICE_ONLY
++		if (!gpwrdn_temp.b.idsts) {
++				core_if->lock = otg_dev->hcd->lock;	
++				is_host = 1;
++		}
++#endif
++		DWC_PRINTF("RESTART ADP\n");
++		if (core_if->adp.probe_enabled)		
++			dwc_otg_adp_probe_stop(core_if);
++		if (core_if->adp.sense_enabled)		
++			dwc_otg_adp_sense_stop(core_if);
++		if (core_if->adp.sense_timer_started)		
++			DWC_TIMER_CANCEL(core_if->adp.sense_timer);
++		if (core_if->adp.vbuson_timer_started)		
++			DWC_TIMER_CANCEL(core_if->adp.vbuson_timer);
++		core_if->adp.probe_timer_values[0] = -1;
++		core_if->adp.probe_timer_values[1] = -1;
++		core_if->adp.sense_timer_started = 0;
++		core_if->adp.vbuson_timer_started = 0;
++		core_if->adp.probe_counter = 0;
++		core_if->adp.gpwrdn = 0;
++		
++		/* Disable PMU and restart ADP */
++		gpwrdn_temp.d32 = 0;
++		gpwrdn_temp.b.pmuactv = 1;
++		gpwrdn_temp.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		DWC_PRINTF("Check point 1\n");
++		dwc_mdelay(110);
++		dwc_otg_adp_start(core_if, is_host);
++		DWC_SPINLOCK(core_if->lock);
++	}
++	
++
++	return 1;
++}
++
++static int32_t dwc_otg_handle_pwrdn_session_change(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	int32_t otg_cap_param = core_if->core_params->otg_cap;
++	DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (core_if->power_down == 2) {
++		if (!core_if->hibernation_suspend) {
++			DWC_PRINTF("Already exited from Hibernation\n");
++			return 1;
++		}
++
++		if ((otg_cap_param != DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ||
++			 otg_cap_param != DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) &&
++			gpwrdn.b.bsessvld == 0) {
++			/* Save gpwrdn register for further usage if stschng interrupt */
++			core_if->gr_backup->gpwrdn_local =
++				DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++			/*Exit from ISR and wait for stschng interrupt with bsessvld = 1 */
++			return 1;
++		}
++
++		/* Switch on the voltage to the core */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnswtch = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Reset the core */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Disable power clamps */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnclmp = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++		/* Remove reset the core signal */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		dwc_udelay(10);
++
++		/* Disable PMU interrupt */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/*Indicates that we are exiting from hibernation */
++		core_if->hibernation_suspend = 0;
++
++		/* Disable PMU */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuactv = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_pcd_start(core_if);
++
++		if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ||
++			otg_cap_param == DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) {
++			/*
++			 * Initiate SRP after initial ADP probe.
++			 */
++			dwc_otg_initiate_srp(core_if);	
++		}
++	}
++
++	return 1;
++}
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * status change either on IDDIG or BSessVld.
++ */
++static uint32_t dwc_otg_handle_pwrdn_stschng_intr(dwc_otg_device_t *otg_dev)
++{
++	int retval;
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	gpwrdn_data_t gpwrdn_temp = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++	
++	if (core_if->power_down == 2) {
++		if (core_if->hibernation_suspend <= 0) {
++			DWC_PRINTF("Already exited from Hibernation\n");
++			return 1;
++		} else
++			gpwrdn_temp.d32 = core_if->gr_backup->gpwrdn_local;
++
++	} else {
++		gpwrdn_temp.d32 = core_if->adp.gpwrdn;
++	}
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	
++	if (gpwrdn.b.idsts ^ gpwrdn_temp.b.idsts) {
++		retval = dwc_otg_handle_pwrdn_idsts_change(otg_dev);
++	} else if (gpwrdn.b.bsessvld ^ gpwrdn_temp.b.bsessvld) {
++		retval = dwc_otg_handle_pwrdn_session_change(core_if);
++	}
++
++	return retval;
++}
++
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * SRP.
++ */
++static int32_t dwc_otg_handle_pwrdn_srp_intr(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++#ifdef DWC_DEV_SRPCAP
++	if (core_if->pwron_timer_started) {
++		core_if->pwron_timer_started = 0;
++		DWC_TIMER_CANCEL(core_if->pwron_timer);
++	}
++#endif
++
++	/* Switch on the voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset the core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Remove reset the core signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Indicates that we are exiting from hibernation */
++	core_if->hibernation_suspend = 0;
++
++	/* Disable PMU */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Programm Disable VBUS to 0 */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.dis_vbus = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/*Initialize the core as Host */
++	core_if->op_state = A_HOST;
++	dwc_otg_core_init(core_if);
++	dwc_otg_enable_global_interrupts(core_if);
++	cil_hcd_start(core_if);
++
++	return 1;
++}
++
++/** This interrupt indicates that restore command after Hibernation
++ * was completed by the core. */
++int32_t dwc_otg_handle_restore_done_intr(dwc_otg_core_if_t * core_if)
++{
++	pcgcctl_data_t pcgcctl;
++	DWC_DEBUGPL(DBG_ANY, "++Restore Done Interrupt++\n");
++
++	//TODO De-assert restore signal. 8.a
++	pcgcctl.d32 = DWC_READ_REG32(core_if->pcgcctl);
++	if (pcgcctl.b.restoremode == 1) {
++		gintmsk_data_t gintmsk = {.d32 = 0 };
++		/*
++		 * If restore mode is Remote Wakeup,
++		 * unmask Remote Wakeup interrupt.
++		 */
++		gintmsk.b.wkupintr = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++				 0, gintmsk.d32);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device has been disconnected from
++ * the root port.
++ */
++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
++		    (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"),
++		    op_state_str(core_if));
++
++/** @todo Consolidate this if statement. */
++#ifndef DWC_HOST_ONLY
++	if (core_if->op_state == B_HOST) {
++		/* If in device mode Disconnect and stop the HCD, then
++		 * start the PCD. */
++		DWC_SPINUNLOCK(core_if->lock);
++		cil_hcd_disconnect(core_if);
++		cil_pcd_start(core_if);
++		DWC_SPINLOCK(core_if->lock);
++		core_if->op_state = B_PERIPHERAL;
++	} else if (dwc_otg_is_device_mode(core_if)) {
++		gotgctl_data_t gotgctl = {.d32 = 0 };
++		gotgctl.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++		if (gotgctl.b.hstsethnpen == 1) {
++			/* Do nothing, if HNP in process the OTG
++			 * interrupt "Host Negotiation Detected"
++			 * interrupt will do the mode switch.
++			 */
++		} else if (gotgctl.b.devhnpen == 0) {
++			/* If in device mode Disconnect and stop the HCD, then
++			 * start the PCD. */
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_hcd_disconnect(core_if);
++			cil_pcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = B_PERIPHERAL;
++		} else {
++			DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n");
++		}
++	} else {
++		if (core_if->op_state == A_HOST) {
++			/* A-Cable still connected but device disconnected. */
++			cil_hcd_disconnect(core_if);
++			if (core_if->adp_enable) {
++				gpwrdn_data_t gpwrdn = { .d32 = 0 };
++				cil_hcd_stop(core_if);
++				/* Enable Power Down Logic */
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_otg_adp_probe_start(core_if);
++
++				/* Power off the core */
++				if (core_if->power_down == 2) {
++					gpwrdn.d32 = 0;
++					gpwrdn.b.pwrdnswtch = 1;
++					DWC_MODIFY_REG32
++					    (&core_if->core_global_regs->gpwrdn,
++					     gpwrdn.d32, 0);
++				}
++			}
++		}
++	}
++#endif
++	/* Change to L3(OFF) state */
++	core_if->lx_state = DWC_OTG_L3;
++
++	gintsts.d32 = 0;
++	gintsts.b.disconnect = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ *
++ * For HNP the USB Suspend interrupt signals the change from
++ * "a_peripheral" to "a_host".
++ *
++ * When power management is enabled the core will be put in low power
++ * mode.
++ */
++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	gintsts_data_t gintsts;
++	dcfg_data_t dcfg;
++
++	DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n");
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		/* Check the Device status register to determine if the Suspend
++		 * state is active. */
++		dsts.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++		DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
++		DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
++			    "HWCFG4.power Optimize=%d\n",
++			    dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
++
++#ifdef PARTIAL_POWER_DOWN
++/** @todo Add a module parameter for power management. */
++
++		if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
++			pcgcctl_data_t power = {.d32 = 0 };
++			DWC_DEBUGPL(DBG_CIL, "suspend\n");
++
++			power.b.pwrclmp = 1;
++			DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++
++			power.b.rstpdwnmodule = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32);
++
++			power.b.stoppclk = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32);
++
++		} else {
++			DWC_DEBUGPL(DBG_ANY, "disconnect?\n");
++		}
++#endif
++		/* PCD callback for suspend. Release the lock inside of callback function */
++		cil_pcd_suspend(core_if);
++		if (core_if->power_down == 2)
++		{
++			dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++			DWC_DEBUGPL(DBG_ANY,"lx_state = %08x\n",core_if->lx_state);
++			DWC_DEBUGPL(DBG_ANY," device address = %08d\n",dcfg.b.devaddr);
++
++			if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) {
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				gpwrdn_data_t gpwrdn = {.d32 = 0 };
++				gusbcfg_data_t gusbcfg = {.d32 = 0 };
++
++				/* Change to L2(suspend) state */
++				core_if->lx_state = DWC_OTG_L2;
++
++				/* Clear interrupt in gintsts */
++				gintsts.d32 = 0;
++				gintsts.b.usbsuspend = 1;
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++						gintsts, gintsts.d32);
++				DWC_PRINTF("Start of hibernation completed\n");
++				dwc_otg_save_global_regs(core_if);
++				dwc_otg_save_dev_regs(core_if);
++
++				gusbcfg.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->
++						   gusbcfg);
++				if (gusbcfg.b.ulpi_utmi_sel == 1) {
++					/* ULPI interface */
++					/* Suspend the Phy Clock */
++					pcgcctl.d32 = 0;
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++							 pcgcctl.d32);
++					dwc_udelay(10);
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++				} else {
++					/* UTMI+ Interface */
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++					dwc_udelay(10);
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++							 pcgcctl.d32);
++					dwc_udelay(10);
++				}
++
++				/* Set flag to indicate that we are in hibernation */
++				core_if->hibernation_suspend = 1;
++				/* Enable interrupts from wake up logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Unmask device mode interrupts in GPWRDN */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.rst_det_msk = 1;
++				gpwrdn.b.lnstchng_msk = 1;
++				gpwrdn.b.sts_chngint_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Enable Power Down Clamp */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnclmp = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Switch off VDD */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				/* Save gpwrdn register for further usage if stschng interrupt */
++				core_if->gr_backup->gpwrdn_local =
++							DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++				DWC_PRINTF("Hibernation completed\n");
++
++				return 1;
++			}
++		} else if (core_if->power_down == 3) {
++			pcgcctl_data_t pcgcctl = {.d32 = 0 };
++			dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++			DWC_DEBUGPL(DBG_ANY, "lx_state = %08x\n",core_if->lx_state);
++			DWC_DEBUGPL(DBG_ANY, " device address = %08d\n",dcfg.b.devaddr);
++
++			if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) {
++				DWC_DEBUGPL(DBG_ANY, "Start entering to extended hibernation\n");
++				core_if->xhib = 1;
++
++				/* Clear interrupt in gintsts */
++				gintsts.d32 = 0;
++				gintsts.b.usbsuspend = 1;
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++					gintsts, gintsts.d32);
++
++				dwc_otg_save_global_regs(core_if);
++				dwc_otg_save_dev_regs(core_if);
++
++				/* Wait for 10 PHY clocks */
++				dwc_udelay(10);
++
++				/* Program GPIO register while entering to xHib */
++				DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x1);
++
++				pcgcctl.b.enbl_extnd_hiber = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++				pcgcctl.d32 = 0;
++				pcgcctl.b.extnd_hiber_pwrclmp = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++				pcgcctl.d32 = 0;
++				pcgcctl.b.extnd_hiber_switch = 1;
++				core_if->gr_backup->xhib_gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++				core_if->gr_backup->xhib_pcgcctl = DWC_READ_REG32(core_if->pcgcctl) | pcgcctl.d32;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++				DWC_DEBUGPL(DBG_ANY, "Finished entering to extended hibernation\n");
++
++				return 1;
++			}
++		}
++	} else {
++		if (core_if->op_state == A_PERIPHERAL) {
++			DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n");
++			/* Clear the a_peripheral flag, back to a_host. */
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_pcd_stop(core_if);
++			cil_hcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = A_HOST;
++		}
++	}
++
++	/* Change to L2(suspend) state */
++	core_if->lx_state = DWC_OTG_L2;
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbsuspend = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++static int32_t dwc_otg_handle_xhib_exit_intr(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	gahbcfg_data_t gahbcfg = {.d32 = 0 };
++
++	dwc_udelay(10);
++
++	/* Program GPIO register while entering to xHib */
++	DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x0);
++
++	pcgcctl.d32 = core_if->gr_backup->xhib_pcgcctl;
++	pcgcctl.b.extnd_hiber_pwrclmp = 0;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	dwc_udelay(10);
++
++	gpwrdn.d32 = core_if->gr_backup->xhib_gpwrdn;
++	gpwrdn.b.restore = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32);
++	dwc_udelay(10);
++
++	restore_lpm_i2c_regs(core_if);
++
++	pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
++	pcgcctl.b.max_xcvrselect = 1;
++	pcgcctl.b.ess_reg_restored = 0;
++	pcgcctl.b.extnd_hiber_switch = 0;
++	pcgcctl.b.extnd_hiber_pwrclmp = 0;
++	pcgcctl.b.enbl_extnd_hiber = 1;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++
++	gahbcfg.d32 = core_if->gr_backup->gahbcfg_local;
++	gahbcfg.b.glblintrmsk = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32);
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0x1 << 16);
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
++			core_if->gr_backup->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
++			core_if->dr_backup->dcfg);
++
++	pcgcctl.d32 = 0;
++	pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
++	pcgcctl.b.max_xcvrselect = 1;
++	pcgcctl.d32 |= 0x608;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	dwc_udelay(10);
++
++	pcgcctl.d32 = 0;
++	pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
++	pcgcctl.b.max_xcvrselect = 1;
++	pcgcctl.b.ess_reg_restored = 1;
++	pcgcctl.b.enbl_extnd_hiber = 1;
++	pcgcctl.b.rstpdwnmodule = 1;
++	pcgcctl.b.restoremode = 1;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++
++	DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
++
++	return 1;
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * This function hadles LPM transaction received interrupt.
++ */
++static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	gintsts_data_t gintsts;
++
++	if (!core_if->core_params->lpm_enable) {
++		DWC_PRINTF("Unexpected LPM interrupt\n");
++	}
++
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32);
++
++	if (dwc_otg_is_host_mode(core_if)) {
++		cil_hcd_sleep(core_if);
++	} else {
++		lpmcfg.b.hird_thres |= (1 << 4);
++		DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg,
++				lpmcfg.d32);
++	}
++
++	/* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */
++	dwc_udelay(10);
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	if (lpmcfg.b.prt_sleep_sts) {
++		/* Save the current state */
++		core_if->lx_state = DWC_OTG_L1;
++	}
++
++	/* Clear interrupt  */
++	gintsts.d32 = 0;
++	gintsts.b.lpmtranrcvd = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++#endif /* CONFIG_USB_DWC_OTG_LPM */
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if)
++{
++	gahbcfg_data_t gahbcfg = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	gintmsk_data_t gintmsk;
++	gintmsk_data_t gintmsk_common = {.d32 = 0 };
++	gintmsk_common.b.wkupintr = 1;
++	gintmsk_common.b.sessreqintr = 1;
++	gintmsk_common.b.conidstschng = 1;
++	gintmsk_common.b.otgintr = 1;
++	gintmsk_common.b.modemismatch = 1;
++	gintmsk_common.b.disconnect = 1;
++	gintmsk_common.b.usbsuspend = 1;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	gintmsk_common.b.lpmtranrcvd = 1;
++#endif
++	gintmsk_common.b.restoredone = 1;
++	/** @todo: The port interrupt occurs while in device
++         * mode. Added code to CIL to clear the interrupt for now!
++         */
++	gintmsk_common.b.portintr = 1;
++
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++	gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg);
++
++#ifdef DEBUG
++	/* if any common interrupts set */
++	if (gintsts.d32 & gintmsk_common.d32) {
++		DWC_DEBUGPL(DBG_ANY, "gintsts=%08x  gintmsk=%08x\n",
++			    gintsts.d32, gintmsk.d32);
++	}
++#endif
++	if (!fiq_fix_enable){
++		if (gahbcfg.b.glblintrmsk)
++			return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
++		else
++			return 0;
++	}
++	else {
++		return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
++	}
++
++}
++
++/* MACRO for clearing interupt bits in GPWRDN register */
++#define CLEAR_GPWRDN_INTR(__core_if,__intr) \
++do { \
++		gpwrdn_data_t gpwrdn = {.d32=0}; \
++		gpwrdn.b.__intr = 1; \
++		DWC_MODIFY_REG32(&__core_if->core_global_regs->gpwrdn, \
++		0, gpwrdn.d32); \
++} while (0)
++
++/**
++ * Common interrupt handler.
++ *
++ * The common interrupts are those that occur in both Host and Device mode.
++ * This handler handles the following interrupts:
++ * - Mode Mismatch Interrupt
++ * - Disconnect Interrupt
++ * - OTG Interrupt
++ * - Connector ID Status Change Interrupt
++ * - Session Request Interrupt.
++ * - Resume / Remote Wakeup Detected Interrupt.
++ * - LPM Transaction Received Interrupt
++ * - ADP Transaction Received Interrupt
++ *
++ */
++int32_t dwc_otg_handle_common_intr(void *dev)
++{
++	int retval = 0;
++	gintsts_data_t gintsts;
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	dwc_otg_device_t *otg_dev = dev;
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (dwc_otg_is_device_mode(core_if))
++		core_if->frame_num = dwc_otg_get_frame_number(core_if);
++		
++	if (core_if->lock)
++		DWC_SPINLOCK(core_if->lock);
++
++	if (core_if->power_down == 3 && core_if->xhib == 1) {
++		DWC_DEBUGPL(DBG_ANY, "Exiting from xHIB state\n");
++		retval |= dwc_otg_handle_xhib_exit_intr(core_if);
++		core_if->xhib = 2;
++		if (core_if->lock)
++			DWC_SPINUNLOCK(core_if->lock);
++
++		return retval;
++	}
++
++	if (core_if->hibernation_suspend <= 0) {
++		gintsts.d32 = dwc_otg_read_common_intr(core_if);
++
++		if (gintsts.b.modemismatch) {
++			retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
++		}
++		if (gintsts.b.otgintr) {
++			retval |= dwc_otg_handle_otg_intr(core_if);
++		}
++		if (gintsts.b.conidstschng) {
++			retval |=
++			    dwc_otg_handle_conn_id_status_change_intr(core_if);
++		}
++		if (gintsts.b.disconnect) {
++			retval |= dwc_otg_handle_disconnect_intr(core_if);
++		}
++		if (gintsts.b.sessreqintr) {
++			retval |= dwc_otg_handle_session_req_intr(core_if);
++		}
++		if (gintsts.b.wkupintr) {
++			retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
++		}
++		if (gintsts.b.usbsuspend) {
++			retval |= dwc_otg_handle_usb_suspend_intr(core_if);
++		}
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		if (gintsts.b.lpmtranrcvd) {
++			retval |= dwc_otg_handle_lpm_intr(core_if);
++		}
++#endif
++		if (gintsts.b.restoredone) {
++			gintsts.d32 = 0;
++	                if (core_if->power_down == 2)
++				core_if->hibernation_suspend = -1;
++			else if (core_if->power_down == 3 && core_if->xhib == 2) {
++				gpwrdn_data_t gpwrdn = {.d32 = 0 };
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				dctl_data_t dctl = {.d32 = 0 };
++
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++						gintsts, 0xFFFFFFFF);
++
++				DWC_DEBUGPL(DBG_ANY,
++					    "RESTORE DONE generated\n");
++
++				gpwrdn.b.restore = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++				dwc_udelay(10);
++
++				pcgcctl.b.rstpdwnmodule = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++
++				DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, core_if->gr_backup->gusbcfg_local);
++				DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, core_if->dr_backup->dcfg);
++				DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, core_if->dr_backup->dctl);
++				dwc_udelay(50);
++
++				dctl.b.pwronprgdone = 1;
++				DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++				dwc_udelay(10);
++
++				dwc_otg_restore_global_regs(core_if);
++				dwc_otg_restore_dev_regs(core_if, 0);
++
++				dctl.d32 = 0;
++				dctl.b.pwronprgdone = 1;
++				DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
++				dwc_udelay(10);
++
++				pcgcctl.d32 = 0;
++				pcgcctl.b.enbl_extnd_hiber = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++
++				/* The core will be in ON STATE */
++				core_if->lx_state = DWC_OTG_L0;
++				core_if->xhib = 0;
++
++				DWC_SPINUNLOCK(core_if->lock);
++				if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++					core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++				}
++				DWC_SPINLOCK(core_if->lock);
++
++			}
++
++			gintsts.b.restoredone = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32);
++			DWC_PRINTF(" --Restore done interrupt received-- \n");
++			retval |= 1;
++		}
++		if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
++			/* The port interrupt occurs while in device mode with HPRT0
++			 * Port Enable/Disable.
++			 */
++			gintsts.d32 = 0;
++			gintsts.b.portintr = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32);
++			retval |= 1;
++
++		}
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32);
++
++		if (gpwrdn.b.disconn_det && gpwrdn.b.disconn_det_msk) {
++			CLEAR_GPWRDN_INTR(core_if, disconn_det);
++			if (gpwrdn.b.linestate == 0) {
++				dwc_otg_handle_pwrdn_disconnect_intr(core_if);
++			} else {
++				DWC_PRINTF("Disconnect detected while linestate is not 0\n");
++			}
++
++			retval |= 1;
++		}
++	 	if (gpwrdn.b.lnstschng && gpwrdn.b.lnstchng_msk) {
++			CLEAR_GPWRDN_INTR(core_if, lnstschng);
++			/* remote wakeup from hibernation */
++			if (gpwrdn.b.linestate == 2 || gpwrdn.b.linestate == 1) {
++				dwc_otg_handle_pwrdn_wakeup_detected_intr(core_if);
++			} else {
++				DWC_PRINTF("gpwrdn.linestate = %d\n", gpwrdn.b.linestate);
++			}
++			retval |= 1;
++	 	}
++		if (gpwrdn.b.rst_det && gpwrdn.b.rst_det_msk) {
++			CLEAR_GPWRDN_INTR(core_if, rst_det);
++			if (gpwrdn.b.linestate == 0) {
++				DWC_PRINTF("Reset detected\n");
++				retval |= dwc_otg_device_hibernation_restore(core_if, 0, 1);
++			}
++		}
++		if (gpwrdn.b.srp_det && gpwrdn.b.srp_det_msk) {
++			CLEAR_GPWRDN_INTR(core_if, srp_det);
++			dwc_otg_handle_pwrdn_srp_intr(core_if);
++			retval |= 1;
++		}
++	}
++	/* Handle ADP interrupt here */
++	if (gpwrdn.b.adp_int) {
++		DWC_PRINTF("ADP interrupt\n");
++		CLEAR_GPWRDN_INTR(core_if, adp_int);
++		dwc_otg_adp_handle_intr(core_if);
++		retval |= 1;
++	}
++	if (gpwrdn.b.sts_chngint && gpwrdn.b.sts_chngint_msk) {
++		DWC_PRINTF("STS CHNG interrupt asserted\n");
++		CLEAR_GPWRDN_INTR(core_if, sts_chngint);
++		dwc_otg_handle_pwrdn_stschng_intr(otg_dev);
++
++		retval |= 1;
++	}
++	if (core_if->lock)
++		DWC_SPINUNLOCK(core_if->lock);
++
++	return retval;
++}
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_core_if.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_core_if.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_core_if.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_core_if.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,705 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $
++ * $Revision: #13 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#if !defined(__DWC_CORE_IF_H__)
++#define __DWC_CORE_IF_H__
++
++#include "dwc_os.h"
++
++/** @file
++ * This file defines DWC_OTG Core API
++ */
++
++struct dwc_otg_core_if;
++typedef struct dwc_otg_core_if dwc_otg_core_if_t;
++
++/** Maximum number of Periodic FIFOs */
++#define MAX_PERIO_FIFOS 15
++/** Maximum number of Periodic FIFOs */
++#define MAX_TX_FIFOS 15
++
++/** Maximum number of Endpoints/HostChannels */
++#define MAX_EPS_CHANNELS 16
++
++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr);
++extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if);
++
++extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if);
++
++extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if);
++extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if);
++
++extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if);
++
++/** This function should be called on every hardware interrupt. */
++extern int32_t dwc_otg_handle_common_intr(void *otg_dev);
++
++/** @name OTG Core Parameters */
++/** @{ */
++
++/**
++ * Specifies the OTG capabilities. The driver will automatically
++ * detect the value for this parameter if none is specified.
++ * 0 - HNP and SRP capable (default)
++ * 1 - SRP Only capable
++ * 2 - No HNP/SRP capable
++ */
++extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if);
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
++
++extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if);
++#define dwc_param_opt_default 1
++
++/**
++ * Specifies whether to use slave or DMA mode for accessing the data
++ * FIFOs. The driver will automatically detect the value for this
++ * parameter if none is specified.
++ * 0 - Slave
++ * 1 - DMA (default, if available)
++ */
++extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_dma_enable_default 1
++
++/**
++ * When DMA mode is enabled specifies whether to use
++ * address DMA or DMA Descritor mode for accessing the data
++ * FIFOs in device mode. The driver will automatically detect
++ * the value for this parameter if none is specified.
++ * 0 - address DMA
++ * 1 - DMA Descriptor(default, if available)
++ */
++extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if,
++					     int32_t val);
++extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if);
++//#define dwc_param_dma_desc_enable_default 1
++#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708
++
++/** The DMA Burst size (applicable only for External DMA
++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ */
++extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if,
++					    int32_t val);
++extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if);
++#define dwc_param_dma_burst_size_default 32
++
++/**
++ * Specifies the maximum speed of operation in host and device mode.
++ * The actual speed depends on the speed of the attached device and
++ * the value of phy_type. The actual speed depends on the speed of the
++ * attached device.
++ * 0 - High Speed (default)
++ * 1 - Full Speed
++ */
++extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if);
++#define dwc_param_speed_default 0
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++
++/** Specifies whether low power mode is supported when attached
++ *	to a Full Speed or Low Speed device in host mode.
++ * 0 - Don't support low power mode (default)
++ * 1 - Support low power mode
++ */
++extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t *
++							  core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t
++							      * core_if);
++#define dwc_param_host_support_fs_ls_low_power_default 0
++
++/** Specifies the PHY clock rate in low power mode when connected to a
++ * Low Speed device in host mode. This parameter is applicable only if
++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
++ * then defaults to 6 MHZ otherwise 48 MHZ.
++ *
++ * 0 - 48 MHz
++ * 1 - 6 MHz
++ */
++extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
++						       core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
++							   core_if);
++#define dwc_param_host_ls_low_power_phy_clk_default 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++
++/**
++ * 0 - Use cC FIFO size parameters
++ * 1 - Allow dynamic FIFO sizing (default)
++ */
++extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if,
++						 int32_t val);
++extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t *
++						     core_if);
++#define dwc_param_enable_dynamic_fifo_default 1
++
++/** Total number of 4-byte words in the data FIFO memory. This
++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++ * Tx FIFOs.
++ * 32 to 32768 (default 8192)
++ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ */
++extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if,
++					    int32_t val);
++extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if);
++//#define dwc_param_data_fifo_size_default 8192
++#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708
++
++/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1064)
++ */
++extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int32_t val);
++extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if);
++#define dwc_param_dev_rx_fifo_size_default 1064
++
++/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++ * when dynamic FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
++						     core_if, int32_t val);
++extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
++							 core_if);
++#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++
++/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++						    int32_t val, int fifo_num);
++extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t *
++							core_if, int fifo_num);
++#define dwc_param_dev_perio_tx_fifo_size_default 256
++
++/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if,
++					       int32_t val);
++extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if);
++//#define dwc_param_host_rx_fifo_size_default 1024
++#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708
++
++/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++ * when Dynamic FIFO sizing is enabled in the core.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
++						      core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
++							  core_if);
++//#define dwc_param_host_nperio_tx_fifo_size_default 1024
++#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708
++
++/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
++						     core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
++							 core_if);
++//#define dwc_param_host_perio_tx_fifo_size_default 1024
++#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708
++
++/** The maximum transfer size supported in bytes.
++ * 2047 to 65,535  (default 65,535)
++ */
++extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if,
++					       int32_t val);
++extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if);
++#define dwc_param_max_transfer_size_default 65535
++
++/** The maximum number of packets in a transfer.
++ * 15 to 511  (default 511)
++ */
++extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if,
++					      int32_t val);
++extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if);
++#define dwc_param_max_packet_count_default 511
++
++/** The number of host channel registers to use.
++ * 1 to 16 (default 12)
++ * Note: The FPGA configuration supports a maximum of 12 host channels.
++ */
++extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if);
++//#define dwc_param_host_channels_default 12
++#define dwc_param_host_channels_default 8 // Broadcom BCM2708
++
++/** The number of endpoints in addition to EP0 available for device
++ * mode operations.
++ * 1 to 15 (default 6 IN and OUT)
++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++ * endpoints in addition to EP0.
++ */
++extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if);
++#define dwc_param_dev_endpoints_default 6
++
++/**
++ * Specifies the type of PHY interface to use. By default, the driver
++ * will automatically detect the phy_type.
++ *
++ * 0 - Full Speed PHY
++ * 1 - UTMI+ (default)
++ * 2 - ULPI
++ */
++extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if);
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++
++/**
++ * Specifies the UTMI+ Data Width. This parameter is
++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++ * PHY_TYPE, this parameter indicates the data width between
++ * the MAC and the ULPI Wrapper.) Also, this parameter is
++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++ * to "8 and 16 bits", meaning that the core has been
++ * configured to work at either data path width.
++ *
++ * 8 or 16 bits (default 16)
++ */
++extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if,
++					    int32_t val);
++extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if);
++//#define dwc_param_phy_utmi_width_default 16
++#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708 
++
++/**
++ * Specifies whether the ULPI operates at double or single
++ * data rate. This parameter is only applicable if PHY_TYPE is
++ * ULPI.
++ *
++ * 0 - single data rate ULPI interface with 8 bit wide data
++ * bus (default)
++ * 1 - double data rate ULPI interface with 4 bit wide data
++ * bus
++ */
++extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if,
++					  int32_t val);
++extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if);
++#define dwc_param_phy_ulpi_ddr_default 0
++
++/**
++ * Specifies whether to use the internal or external supply to
++ * drive the vbus with a ULPI phy.
++ */
++extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if,
++					       int32_t val);
++extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if);
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++
++/**
++ * Specifies whether to use the I2Cinterface for full speed PHY. This
++ * parameter is only applicable if PHY_TYPE is FS.
++ * 0 - No (default)
++ * 1 - Yes
++ */
++extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_i2c_enable_default 0
++
++extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if);
++#define dwc_param_ulpi_fs_ls_default 0
++
++extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if);
++#define dwc_param_ts_dline_default 0
++
++/**
++ * Specifies whether dedicated transmit FIFOs are
++ * enabled for non periodic IN endpoints in device mode
++ * 0 - No
++ * 1 - Yes
++ */
++extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if,
++						 int32_t val);
++extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t *
++						     core_if);
++#define dwc_param_en_multiple_tx_fifo_default 1
++
++/** Number of 4-byte words in each of the Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int fifo_num, int32_t val);
++extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
++						  int fifo_num);
++#define dwc_param_dev_tx_fifo_size_default 768
++
++/** Thresholding enable flag-
++ * bit 0 - enable non-ISO Tx thresholding
++ * bit 1 - enable ISO Tx thresholding
++ * bit 2 - enable Rx thresholding
++ */
++extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num);
++#define dwc_param_thr_ctl_default 0
++
++/** Thresholding length for Tx
++ * FIFOs in 32 bit DWORDs
++ */
++extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if);
++#define dwc_param_tx_thr_length_default 64
++
++/** Thresholding length for Rx
++ *	FIFOs in 32 bit DWORDs
++ */
++extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if);
++#define dwc_param_rx_thr_length_default 64
++
++/**
++ * Specifies whether LPM (Link Power Management) support is enabled
++ */
++extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_lpm_enable_default 1
++
++/**
++ * Specifies whether PTI enhancement is enabled
++ */
++extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_pti_enable_default 0
++
++/**
++ * Specifies whether MPI enhancement is enabled
++ */
++extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_mpi_enable_default 0
++
++/**
++ * Specifies whether ADP capability is enabled
++ */
++extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_adp_enable_default 0
++
++/**
++ * Specifies whether IC_USB capability is enabled
++ */
++
++extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if);
++#define dwc_param_ic_usb_cap_default 0
++
++extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if);
++#define dwc_param_ahb_thr_ratio_default 0
++
++extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if);
++#define dwc_param_power_down_default 0
++
++extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if);
++#define dwc_param_reload_ctl_default 0
++
++extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if,
++										int32_t val);
++extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if);
++#define dwc_param_dev_out_nak_default 0
++
++extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if,
++										 int32_t val);
++extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if);
++#define dwc_param_cont_on_bna_default 0
++
++extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if,
++										 int32_t val);
++extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if);
++#define dwc_param_ahb_single_default 0
++
++extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if);
++#define dwc_param_otg_ver_default 0
++
++/** @} */
++
++/** @name Access to registers and bit-fields */
++
++/**
++ * Dump core registers and SPRAM
++ */
++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if);
++
++/**
++ * Get host negotiation status.
++ */
++extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get srp status
++ */
++extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if);
++
++/**
++ * Set hnpreq bit in the GOTGCTL register.
++ */
++extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get Content of SNPSID register.
++ */
++extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get current mode.
++ * Returns 0 if in device mode, and 1 if in host mode.
++ */
++extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of hnpcapable field in the GUSBCFG register
++ */
++extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of hnpcapable field in the GUSBCFG register
++ */
++extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of srpcapable field in the GUSBCFG register
++ */
++extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of srpcapable field in the GUSBCFG register
++ */
++extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of devspeed field in the DCFG register
++ */
++extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of devspeed field in the DCFG register
++ */
++extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get the value of busconnected field from the HPRT0 register
++ */
++extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if);
++
++/**
++ * Gets the device enumeration Speed.
++ */
++extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of prtpwr field from the HPRT0 register
++ */
++extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of flag indicating core state - hibernated or not
++ */
++extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if);
++
++/**
++ * Set value of prtpwr field from the HPRT0 register
++ */
++extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of prtsusp field from the HPRT0 regsiter
++ */
++extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of prtpwr field from the HPRT0 register
++ */
++extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of ModeChTimEn field from the HCFG regsiter
++ */
++extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of ModeChTimEn field from the HCFG regsiter
++ */
++extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of Fram Interval field from the HFIR regsiter
++ */
++extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of Frame Interval field from the HFIR regsiter
++ */
++extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Set value of prtres field from the HPRT0 register
++ *FIXME Remove?
++ */
++extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of rmtwkupsig bit in DCTL register
++ */
++extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of prt_sleep_sts field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of rem_wkup_en field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of appl_resp field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of appl_resp field from the GLPMCFG register
++ */
++extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of hsic_connect field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of hsic_connect field from the GLPMCFG register
++ */
++extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of inv_sel_hsic field from the GLPMCFG register.
++ */
++extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of inv_sel_hsic field from the GLPMFG register.
++ */
++extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/*
++ * Some functions for accessing registers
++ */
++
++/**
++ *  GOTGCTL register
++ */
++extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GUSBCFG register
++ */
++extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GRXFSIZ register
++ */
++extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GNPTXFSIZ register
++ */
++extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
++
++extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GGPIO register
++ */
++extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GUID register
++ */
++extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * HPRT0 register
++ */
++extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GHPTXFSIZE
++ */
++extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if);
++
++/** @} */
++
++#endif				/* __DWC_CORE_IF_H__ */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_dbg.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_dbg.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_dbg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_dbg.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,117 @@
++/* ==========================================================================
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_DBG_H__
++#define __DWC_OTG_DBG_H__
++
++/** @file
++ * This file defines debug levels.
++ * Debugging support vanishes in non-debug builds.  
++ */
++
++/**
++ * The Debug Level bit-mask variable.
++ */
++extern uint32_t g_dbg_lvl;
++/**
++ * Set the Debug Level variable.
++ */
++static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new)
++{
++	uint32_t old = g_dbg_lvl;
++	g_dbg_lvl = new;
++	return old;
++}
++
++#define DBG_USER	(0x1)
++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL		(0x2)
++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
++ * messages */
++#define DBG_CILV	(0x20)
++/**  When debug level has the DBG_PCD bit set, display PCD (Device) debug
++ *  messages */
++#define DBG_PCD		(0x4)
++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
++ * messages */
++#define DBG_PCDV	(0x40)
++/** When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD		(0x8)
++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
++ * messages */
++#define DBG_HCDV	(0x80)
++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
++ *  mode. */
++#define DBG_HCD_URB	(0x800)
++/** When debug level has the DBG_HCDI bit set, display host interrupt
++ *  messages. */
++#define DBG_HCDI	(0x1000)
++
++/** When debug level has any bit set, display debug messages */
++#define DBG_ANY		(0xFF)
++
++/** All debug messages off */
++#define DBG_OFF		0
++
++/** Prefix string for DWC_DEBUG print macros. */
++#define USB_DWC "DWC_otg: "
++
++/** 
++ * Print a debug message when the Global debug level variable contains
++ * the bit defined in <code>lvl</code>.
++ *
++ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
++ * @param[in] x - like printf
++ *
++ *    Example:<p>
++ * <code>
++ *      DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
++ * </code>
++ * <br>
++ * results in:<br> 
++ * <code>
++ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
++ * </code>
++ */
++#ifdef DEBUG
++
++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0)
++# define DWC_DEBUGP(x...)	DWC_DEBUGPL(DBG_ANY, x )
++
++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
++
++#else
++
++# define DWC_DEBUGPL(lvl, x...) do{}while(0)
++# define DWC_DEBUGP(x...)
++
++# define CHK_DEBUG_LEVEL(level) (0)
++
++#endif /*DEBUG*/
++#endif
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_driver.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_driver.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_driver.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_driver.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1732 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $
++ * $Revision: #92 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ * The dwc_otg_driver module provides the initialization and cleanup entry
++ * points for the DWC_otg driver. This module will be dynamically installed
++ * after Linux is booted using the insmod command. When the module is
++ * installed, the dwc_otg_driver_init function is called. When the module is
++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
++ *
++ * This module also defines a data structure for the dwc_otg_driver, which is
++ * used in conjunction with the standard ARM lm_device structure. These
++ * structures allow the OTG driver to comply with the standard Linux driver
++ * model in which devices and drivers are registered with a bus driver. This
++ * has the benefit that Linux can expose attributes of the driver and device
++ * in its special sysfs file system. Users can then read or write files in
++ * this file system to perform diagnostics on the driver components or the
++ * device.
++ */
++
++#include "dwc_otg_os_dep.h"
++#include "dwc_os.h"
++#include "dwc_otg_dbg.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_core_if.h"
++#include "dwc_otg_pcd_if.h"
++#include "dwc_otg_hcd_if.h"
++
++#define DWC_DRIVER_VERSION	"3.00a 10-AUG-2012"
++#define DWC_DRIVER_DESC		"HS OTG USB Controller driver"
++
++bool microframe_schedule=true;
++
++static const char dwc_driver_name[] = "dwc_otg";
++
++extern void* dummy_send;
++
++extern int pcd_init(
++#ifdef LM_INTERFACE
++			   struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			   struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++extern int hcd_init(
++#ifdef LM_INTERFACE
++			   struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			   struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++
++extern int pcd_remove(
++#ifdef LM_INTERFACE
++			     struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			     struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *_dev
++#endif
++    );
++
++extern void hcd_remove(
++#ifdef LM_INTERFACE
++			      struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			      struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *_dev
++#endif
++    );
++
++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host);
++
++/*-------------------------------------------------------------------------*/
++/* Encapsulate the module parameter settings */
++
++struct dwc_otg_driver_module_params {
++	int32_t opt;
++	int32_t otg_cap;
++	int32_t dma_enable;
++	int32_t dma_desc_enable;
++	int32_t dma_burst_size;
++	int32_t speed;
++	int32_t host_support_fs_ls_low_power;
++	int32_t host_ls_low_power_phy_clk;
++	int32_t enable_dynamic_fifo;
++	int32_t data_fifo_size;
++	int32_t dev_rx_fifo_size;
++	int32_t dev_nperio_tx_fifo_size;
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++	int32_t host_rx_fifo_size;
++	int32_t host_nperio_tx_fifo_size;
++	int32_t host_perio_tx_fifo_size;
++	int32_t max_transfer_size;
++	int32_t max_packet_count;
++	int32_t host_channels;
++	int32_t dev_endpoints;
++	int32_t phy_type;
++	int32_t phy_utmi_width;
++	int32_t phy_ulpi_ddr;
++	int32_t phy_ulpi_ext_vbus;
++	int32_t i2c_enable;
++	int32_t ulpi_fs_ls;
++	int32_t ts_dline;
++	int32_t en_multiple_tx_fifo;
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++	uint32_t thr_ctl;
++	uint32_t tx_thr_length;
++	uint32_t rx_thr_length;
++	int32_t pti_enable;
++	int32_t mpi_enable;
++	int32_t lpm_enable;
++	int32_t ic_usb_cap;
++	int32_t ahb_thr_ratio;
++	int32_t power_down;
++	int32_t reload_ctl;
++	int32_t dev_out_nak;
++	int32_t cont_on_bna;
++	int32_t ahb_single;
++	int32_t otg_ver;
++	int32_t adp_enable;
++};
++
++static struct dwc_otg_driver_module_params dwc_otg_module_params = {
++	.opt = -1,
++	.otg_cap = -1,
++	.dma_enable = -1,
++	.dma_desc_enable = -1,
++	.dma_burst_size = -1,
++	.speed = -1,
++	.host_support_fs_ls_low_power = -1,
++	.host_ls_low_power_phy_clk = -1,
++	.enable_dynamic_fifo = -1,
++	.data_fifo_size = -1,
++	.dev_rx_fifo_size = -1,
++	.dev_nperio_tx_fifo_size = -1,
++	.dev_perio_tx_fifo_size = {
++				   /* dev_perio_tx_fifo_size_1 */
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1
++				   /* 15 */
++				   },
++	.host_rx_fifo_size = -1,
++	.host_nperio_tx_fifo_size = -1,
++	.host_perio_tx_fifo_size = -1,
++	.max_transfer_size = -1,
++	.max_packet_count = -1,
++	.host_channels = -1,
++	.dev_endpoints = -1,
++	.phy_type = -1,
++	.phy_utmi_width = -1,
++	.phy_ulpi_ddr = -1,
++	.phy_ulpi_ext_vbus = -1,
++	.i2c_enable = -1,
++	.ulpi_fs_ls = -1,
++	.ts_dline = -1,
++	.en_multiple_tx_fifo = -1,
++	.dev_tx_fifo_size = {
++			     /* dev_tx_fifo_size */
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1
++			     /* 15 */
++			     },
++	.thr_ctl = -1,
++	.tx_thr_length = -1,
++	.rx_thr_length = -1,
++	.pti_enable = -1,
++	.mpi_enable = -1,
++	.lpm_enable = 0,
++	.ic_usb_cap = -1,
++	.ahb_thr_ratio = -1,
++	.power_down = -1,
++	.reload_ctl = -1,
++	.dev_out_nak = -1,
++	.cont_on_bna = -1,
++	.ahb_single = -1,
++	.otg_ver = -1,
++	.adp_enable = -1,
++};
++
++//Global variable to switch the fiq fix on or off (declared in bcm2708.c)
++extern bool fiq_fix_enable;
++
++//Global variable to switch the nak holdoff on or off
++bool nak_holdoff_enable = true;
++
++
++/**
++ * This function shows the Driver Version.
++ */
++static ssize_t version_show(struct device_driver *dev, char *buf)
++{
++	return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n",
++			DWC_DRIVER_VERSION);
++}
++
++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
++
++/**
++ * Global Debug Level Mask.
++ */
++uint32_t g_dbg_lvl = 0;		/* OFF */
++
++/**
++ * This function shows the driver Debug Level.
++ */
++static ssize_t dbg_level_show(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%0x\n", g_dbg_lvl);
++}
++
++/**
++ * This function stores the driver Debug Level.
++ */
++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf,
++			       size_t count)
++{
++	g_dbg_lvl = simple_strtoul(buf, NULL, 16);
++	return count;
++}
++
++static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show,
++		   dbg_level_store);
++
++/**
++ * This function is called during module intialization
++ * to pass module parameters to the DWC_OTG CORE.
++ */
++static int set_parameters(dwc_otg_core_if_t * core_if)
++{
++	int retval = 0;
++	int i;
++
++	if (dwc_otg_module_params.otg_cap != -1) {
++		retval +=
++		    dwc_otg_set_param_otg_cap(core_if,
++					      dwc_otg_module_params.otg_cap);
++	}
++	if (dwc_otg_module_params.dma_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_dma_enable(core_if,
++						 dwc_otg_module_params.
++						 dma_enable);
++	}
++	if (dwc_otg_module_params.dma_desc_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_dma_desc_enable(core_if,
++						      dwc_otg_module_params.
++						      dma_desc_enable);
++	}
++	if (dwc_otg_module_params.opt != -1) {
++		retval +=
++		    dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt);
++	}
++	if (dwc_otg_module_params.dma_burst_size != -1) {
++		retval +=
++		    dwc_otg_set_param_dma_burst_size(core_if,
++						     dwc_otg_module_params.
++						     dma_burst_size);
++	}
++	if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) {
++		retval +=
++		    dwc_otg_set_param_host_support_fs_ls_low_power(core_if,
++								   dwc_otg_module_params.
++								   host_support_fs_ls_low_power);
++	}
++	if (dwc_otg_module_params.enable_dynamic_fifo != -1) {
++		retval +=
++		    dwc_otg_set_param_enable_dynamic_fifo(core_if,
++							  dwc_otg_module_params.
++							  enable_dynamic_fifo);
++	}
++	if (dwc_otg_module_params.data_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_data_fifo_size(core_if,
++						     dwc_otg_module_params.
++						     data_fifo_size);
++	}
++	if (dwc_otg_module_params.dev_rx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_dev_rx_fifo_size(core_if,
++						       dwc_otg_module_params.
++						       dev_rx_fifo_size);
++	}
++	if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if,
++							      dwc_otg_module_params.
++							      dev_nperio_tx_fifo_size);
++	}
++	if (dwc_otg_module_params.host_rx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_host_rx_fifo_size(core_if,
++							dwc_otg_module_params.host_rx_fifo_size);
++	}
++	if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_host_nperio_tx_fifo_size(core_if,
++							       dwc_otg_module_params.
++							       host_nperio_tx_fifo_size);
++	}
++	if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_host_perio_tx_fifo_size(core_if,
++							      dwc_otg_module_params.
++							      host_perio_tx_fifo_size);
++	}
++	if (dwc_otg_module_params.max_transfer_size != -1) {
++		retval +=
++		    dwc_otg_set_param_max_transfer_size(core_if,
++							dwc_otg_module_params.
++							max_transfer_size);
++	}
++	if (dwc_otg_module_params.max_packet_count != -1) {
++		retval +=
++		    dwc_otg_set_param_max_packet_count(core_if,
++						       dwc_otg_module_params.
++						       max_packet_count);
++	}
++	if (dwc_otg_module_params.host_channels != -1) {
++		retval +=
++		    dwc_otg_set_param_host_channels(core_if,
++						    dwc_otg_module_params.
++						    host_channels);
++	}
++	if (dwc_otg_module_params.dev_endpoints != -1) {
++		retval +=
++		    dwc_otg_set_param_dev_endpoints(core_if,
++						    dwc_otg_module_params.
++						    dev_endpoints);
++	}
++	if (dwc_otg_module_params.phy_type != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_type(core_if,
++					       dwc_otg_module_params.phy_type);
++	}
++	if (dwc_otg_module_params.speed != -1) {
++		retval +=
++		    dwc_otg_set_param_speed(core_if,
++					    dwc_otg_module_params.speed);
++	}
++	if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) {
++		retval +=
++		    dwc_otg_set_param_host_ls_low_power_phy_clk(core_if,
++								dwc_otg_module_params.
++								host_ls_low_power_phy_clk);
++	}
++	if (dwc_otg_module_params.phy_ulpi_ddr != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_ulpi_ddr(core_if,
++						   dwc_otg_module_params.
++						   phy_ulpi_ddr);
++	}
++	if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_ulpi_ext_vbus(core_if,
++							dwc_otg_module_params.
++							phy_ulpi_ext_vbus);
++	}
++	if (dwc_otg_module_params.phy_utmi_width != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_utmi_width(core_if,
++						     dwc_otg_module_params.
++						     phy_utmi_width);
++	}
++	if (dwc_otg_module_params.ulpi_fs_ls != -1) {
++		retval +=
++		    dwc_otg_set_param_ulpi_fs_ls(core_if,
++						 dwc_otg_module_params.ulpi_fs_ls);
++	}
++	if (dwc_otg_module_params.ts_dline != -1) {
++		retval +=
++		    dwc_otg_set_param_ts_dline(core_if,
++					       dwc_otg_module_params.ts_dline);
++	}
++	if (dwc_otg_module_params.i2c_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_i2c_enable(core_if,
++						 dwc_otg_module_params.
++						 i2c_enable);
++	}
++	if (dwc_otg_module_params.en_multiple_tx_fifo != -1) {
++		retval +=
++		    dwc_otg_set_param_en_multiple_tx_fifo(core_if,
++							  dwc_otg_module_params.
++							  en_multiple_tx_fifo);
++	}
++	for (i = 0; i < 15; i++) {
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
++			retval +=
++			    dwc_otg_set_param_dev_perio_tx_fifo_size(core_if,
++								     dwc_otg_module_params.
++								     dev_perio_tx_fifo_size
++								     [i], i);
++		}
++	}
++
++	for (i = 0; i < 15; i++) {
++		if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
++			retval += dwc_otg_set_param_dev_tx_fifo_size(core_if,
++								     dwc_otg_module_params.
++								     dev_tx_fifo_size
++								     [i], i);
++		}
++	}
++	if (dwc_otg_module_params.thr_ctl != -1) {
++		retval +=
++		    dwc_otg_set_param_thr_ctl(core_if,
++					      dwc_otg_module_params.thr_ctl);
++	}
++	if (dwc_otg_module_params.mpi_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_mpi_enable(core_if,
++						 dwc_otg_module_params.
++						 mpi_enable);
++	}
++	if (dwc_otg_module_params.pti_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_pti_enable(core_if,
++						 dwc_otg_module_params.
++						 pti_enable);
++	}
++	if (dwc_otg_module_params.lpm_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_lpm_enable(core_if,
++						 dwc_otg_module_params.
++						 lpm_enable);
++	}
++	if (dwc_otg_module_params.ic_usb_cap != -1) {
++		retval +=
++		    dwc_otg_set_param_ic_usb_cap(core_if,
++						 dwc_otg_module_params.
++						 ic_usb_cap);
++	}
++	if (dwc_otg_module_params.tx_thr_length != -1) {
++		retval +=
++		    dwc_otg_set_param_tx_thr_length(core_if,
++						    dwc_otg_module_params.tx_thr_length);
++	}
++	if (dwc_otg_module_params.rx_thr_length != -1) {
++		retval +=
++		    dwc_otg_set_param_rx_thr_length(core_if,
++						    dwc_otg_module_params.
++						    rx_thr_length);
++	}
++	if (dwc_otg_module_params.ahb_thr_ratio != -1) {
++		retval +=
++		    dwc_otg_set_param_ahb_thr_ratio(core_if,
++						    dwc_otg_module_params.ahb_thr_ratio);
++	}
++	if (dwc_otg_module_params.power_down != -1) {
++		retval +=
++		    dwc_otg_set_param_power_down(core_if,
++						 dwc_otg_module_params.power_down);
++	}
++	if (dwc_otg_module_params.reload_ctl != -1) {
++		retval +=
++		    dwc_otg_set_param_reload_ctl(core_if,
++						 dwc_otg_module_params.reload_ctl);
++	}
++
++	if (dwc_otg_module_params.dev_out_nak != -1) {
++		retval +=
++			dwc_otg_set_param_dev_out_nak(core_if,
++			dwc_otg_module_params.dev_out_nak);
++	}
++
++	if (dwc_otg_module_params.cont_on_bna != -1) {
++		retval +=
++			dwc_otg_set_param_cont_on_bna(core_if,
++			dwc_otg_module_params.cont_on_bna);
++	}
++
++	if (dwc_otg_module_params.ahb_single != -1) {
++		retval +=
++			dwc_otg_set_param_ahb_single(core_if,
++			dwc_otg_module_params.ahb_single);
++	}
++
++	if (dwc_otg_module_params.otg_ver != -1) {
++		retval +=
++		    dwc_otg_set_param_otg_ver(core_if,
++					      dwc_otg_module_params.otg_ver);
++	}
++	if (dwc_otg_module_params.adp_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_adp_enable(core_if,
++						 dwc_otg_module_params.
++						 adp_enable);
++	}
++	return retval;
++}
++
++/**
++ * This function is the top level interrupt handler for the Common
++ * (Device and host modes) interrupts.
++ */
++static irqreturn_t dwc_otg_common_irq(int irq, void *dev)
++{
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_handle_common_intr(dev);
++	if (retval != 0) {
++		S3C2410X_CLEAR_EINTPEND();
++	}
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * This function is called when a lm_device is unregistered with the
++ * dwc_otg_driver. This happens, for example, when the rmmod command is
++ * executed. The device may or may not be electrically present. If it is
++ * present, the driver stops device processing. Any resources used on behalf
++ * of this device are freed.
++ *
++ * @param _dev
++ */
++#ifdef LM_INTERFACE
++#define REM_RETVAL(n) 
++static void dwc_otg_driver_remove(	 struct lm_device *_dev )
++{       dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev);
++#elif  defined(PCI_INTERFACE)
++#define REM_RETVAL(n) 
++static void dwc_otg_driver_remove(	 struct pci_dev *_dev )
++{	dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev);
++#elif  defined(PLATFORM_INTERFACE)
++#define REM_RETVAL(n) n
++static int dwc_otg_driver_remove(        struct platform_device *_dev )
++{       dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev);
++#endif
++
++	DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev);
++
++	if (!otg_dev) {
++		/* Memory allocation for the dwc_otg_device failed. */
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++                return REM_RETVAL(-ENOMEM);
++	}
++#ifndef DWC_DEVICE_ONLY
++	if (otg_dev->hcd) {
++		hcd_remove(_dev);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++                return REM_RETVAL(-EINVAL);
++	}
++#endif
++
++#ifndef DWC_HOST_ONLY
++	if (otg_dev->pcd) {
++		pcd_remove(_dev);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->pcd NULL!\n", __func__);
++                return REM_RETVAL(-EINVAL);
++	}
++#endif
++	/*
++	 * Free the IRQ
++	 */
++	if (otg_dev->common_irq_installed) {
++#ifdef PLATFORM_INTERFACE
++		free_irq(platform_get_irq(_dev, 0), otg_dev);
++#else
++		free_irq(_dev->irq, otg_dev);
++#endif
++        } else {
++		DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__);
++		return REM_RETVAL(-ENXIO);
++	}  
++
++	if (otg_dev->core_if) {
++		dwc_otg_cil_remove(otg_dev->core_if);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->core_if NULL!\n", __func__);
++		return REM_RETVAL(-ENXIO);
++	}
++
++	/*
++	 * Remove the device attributes
++	 */
++	dwc_otg_attr_remove(_dev);
++
++	/*
++	 * Return the memory.
++	 */
++	if (otg_dev->os_dep.base) {
++		iounmap(otg_dev->os_dep.base);
++	}
++	DWC_FREE(otg_dev);
++
++	/*
++	 * Clear the drvdata pointer.
++	 */
++#ifdef LM_INTERFACE
++	lm_set_drvdata(_dev, 0);
++#elif defined(PCI_INTERFACE)
++        release_mem_region(otg_dev->os_dep.rsrc_start,
++                           otg_dev->os_dep.rsrc_len);
++	pci_set_drvdata(_dev, 0);
++#elif  defined(PLATFORM_INTERFACE)
++        platform_set_drvdata(_dev, 0);
++#endif
++        return REM_RETVAL(0);
++}
++
++/**
++ * This function is called when an lm_device is bound to a
++ * dwc_otg_driver. It creates the driver components required to
++ * control the device (CIL, HCD, and PCD) and it initializes the
++ * device. The driver components are stored in a dwc_otg_device
++ * structure. A reference to the dwc_otg_device is saved in the
++ * lm_device. This allows the driver to access the dwc_otg_device
++ * structure on subsequent calls to driver methods for this device.
++ *
++ * @param _dev Bus device
++ */
++static int dwc_otg_driver_probe(
++#ifdef LM_INTERFACE
++				       struct lm_device *_dev
++#elif defined(PCI_INTERFACE)
++				       struct pci_dev *_dev,
++				       const struct pci_device_id *id
++#elif  defined(PLATFORM_INTERFACE)
++                                       struct platform_device *_dev
++#endif
++    )
++{
++	int retval = 0;
++	dwc_otg_device_t *dwc_otg_device;
++        int devirq;
++
++	dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev);
++#ifdef LM_INTERFACE
++	dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start);
++#elif defined(PCI_INTERFACE)
++	if (!id) {
++		DWC_ERROR("Invalid pci_device_id %p", id);
++		return -EINVAL;
++	}
++
++	if (!_dev || (pci_enable_device(_dev) < 0)) {
++		DWC_ERROR("Invalid pci_device %p", _dev);
++		return -ENODEV;
++	}
++	dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0));
++	/* other stuff needed as well? */
++        
++#elif  defined(PLATFORM_INTERFACE)
++	dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n",
++                (unsigned)_dev->resource->start,
++                (unsigned)(_dev->resource->end - _dev->resource->start));
++#endif
++
++	dwc_otg_device = DWC_ALLOC(sizeof(dwc_otg_device_t));
++
++	if (!dwc_otg_device) {
++		dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n");
++		return -ENOMEM;
++	}
++
++	memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
++	dwc_otg_device->os_dep.reg_offset = 0xFFFFFFFF;
++
++	/*
++	 * Map the DWC_otg Core memory into virtual address space.
++	 */
++#ifdef LM_INTERFACE
++	dwc_otg_device->os_dep.base = ioremap(_dev->resource.start, SZ_256K);
++
++	if (!dwc_otg_device->os_dep.base) {
++		dev_err(&_dev->dev, "ioremap() failed\n");
++		DWC_FREE(dwc_otg_device);
++		return -ENOMEM;
++	}
++	dev_dbg(&_dev->dev, "base=0x%08x\n",
++		(unsigned)dwc_otg_device->os_dep.base);
++#elif defined(PCI_INTERFACE)
++	_dev->current_state = PCI_D0;
++	_dev->dev.power.power_state = PMSG_ON;
++
++	if (!_dev->irq) {
++		DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!",
++			  pci_name(_dev));
++		iounmap(dwc_otg_device->os_dep.base);
++		DWC_FREE(dwc_otg_device);
++		return -ENODEV;
++	}
++
++	dwc_otg_device->os_dep.rsrc_start = pci_resource_start(_dev, 0);
++	dwc_otg_device->os_dep.rsrc_len = pci_resource_len(_dev, 0);
++	DWC_DEBUGPL(DBG_ANY, "PCI resource: start=%08x, len=%08x\n",
++		    (unsigned)dwc_otg_device->os_dep.rsrc_start,
++		    (unsigned)dwc_otg_device->os_dep.rsrc_len);
++	if (!request_mem_region
++	    (dwc_otg_device->os_dep.rsrc_start, dwc_otg_device->os_dep.rsrc_len,
++	     "dwc_otg")) {
++		dev_dbg(&_dev->dev, "error requesting memory\n");
++		iounmap(dwc_otg_device->os_dep.base);
++		DWC_FREE(dwc_otg_device);
++		return -EFAULT;
++	}
++
++	dwc_otg_device->os_dep.base =
++	    ioremap_nocache(dwc_otg_device->os_dep.rsrc_start,
++			    dwc_otg_device->os_dep.rsrc_len);
++	if (dwc_otg_device->os_dep.base == NULL) {
++		dev_dbg(&_dev->dev, "error mapping memory\n");
++		release_mem_region(dwc_otg_device->os_dep.rsrc_start,
++				   dwc_otg_device->os_dep.rsrc_len);
++		iounmap(dwc_otg_device->os_dep.base);
++		DWC_FREE(dwc_otg_device);
++		return -EFAULT;
++	}
++	dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n",
++		dwc_otg_device->os_dep.base);
++	dwc_otg_device->os_dep.base = (char *)dwc_otg_device->os_dep.base;
++	dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n",
++		dwc_otg_device->os_dep.base);
++	dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__,
++		(unsigned)dwc_otg_device->os_dep.rsrc_start,
++		dwc_otg_device->os_dep.base);
++
++	pci_set_master(_dev);
++	pci_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PLATFORM_INTERFACE)
++        DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n",
++                    _dev->resource->start,
++                    _dev->resource->end - _dev->resource->start + 1);
++#if 1
++        if (!request_mem_region(_dev->resource[0].start,
++                                _dev->resource[0].end - _dev->resource[0].start + 1,
++                                "dwc_otg")) {
++          dev_dbg(&_dev->dev, "error reserving mapped memory\n");
++          retval = -EFAULT;
++          goto fail;
++        }
++
++	dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource[0].start,
++                                                      _dev->resource[0].end -
++                                                      _dev->resource[0].start+1);
++	if (fiq_fix_enable)
++	{
++		if (!request_mem_region(_dev->resource[1].start,
++	                                _dev->resource[1].end - _dev->resource[1].start + 1,
++	                                "dwc_otg")) {
++	          dev_dbg(&_dev->dev, "error reserving mapped memory\n");
++	          retval = -EFAULT;
++	          goto fail;
++	}
++
++		dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start,
++							    _dev->resource[1].end -
++							    _dev->resource[1].start + 1);
++		dummy_send = (void *) kmalloc(16, GFP_ATOMIC);
++	}
++
++#else
++        {
++                struct map_desc desc = {
++                    .virtual = IO_ADDRESS((unsigned)_dev->resource->start),
++                    .pfn     = __phys_to_pfn((unsigned)_dev->resource->start),
++                    .length  = SZ_128K,
++                    .type    = MT_DEVICE
++                };
++                iotable_init(&desc, 1);
++                dwc_otg_device->os_dep.base = (void *)desc.virtual;
++        }
++#endif
++	if (!dwc_otg_device->os_dep.base) {
++		dev_err(&_dev->dev, "ioremap() failed\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++	dev_dbg(&_dev->dev, "base=0x%08x\n",
++                (unsigned)dwc_otg_device->os_dep.base);
++#endif
++
++	/*
++	 * Initialize driver data to point to the global DWC_otg
++	 * Device structure.
++	 */
++#ifdef LM_INTERFACE
++	lm_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PLATFORM_INTERFACE)
++	platform_set_drvdata(_dev, dwc_otg_device);
++#endif
++	dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
++
++	dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->os_dep.base);
++        DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n",
++                    dwc_otg_device, dwc_otg_device->core_if);//GRAYG
++        
++	if (!dwc_otg_device->core_if) {
++		dev_err(&_dev->dev, "CIL initialization failed!\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++
++	dev_dbg(&_dev->dev, "Calling get_gsnpsid\n");
++	/*
++	 * Attempt to ensure this device is really a DWC_otg Controller.
++	 * Read and verify the SNPSID register contents. The value should be
++	 * 0x45F42XXX or 0x45F42XXX, which corresponds to either "OT2" or "OTG3",
++	 * as in "OTG version 2.XX" or "OTG version 3.XX".
++	 */
++
++	if (((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) !=	0x4F542000) &&
++		((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F543000)) {
++		dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n",
++			dwc_otg_get_gsnpsid(dwc_otg_device->core_if));
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	/*
++	 * Validate parameter values.
++	 */
++	dev_dbg(&_dev->dev, "Calling set_parameters\n");
++	if (set_parameters(dwc_otg_device->core_if)) {
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	/*
++	 * Create Device Attributes in sysfs
++	 */
++	dev_dbg(&_dev->dev, "Calling attr_create\n");
++	dwc_otg_attr_create(_dev);
++
++	/*
++	 * Disable the global interrupt until all the interrupt
++	 * handlers are installed.
++	 */
++	dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n");
++	dwc_otg_disable_global_interrupts(dwc_otg_device->core_if);
++
++	/*
++	 * Install the interrupt handler for the common interrupts before
++	 * enabling common interrupts in core_init below.
++	 */
++        
++#if defined(PLATFORM_INTERFACE)
++        devirq = platform_get_irq(_dev, 0);
++#else
++        devirq = _dev->irq;
++#endif
++	DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
++		    devirq);
++	dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq);
++	retval = request_irq(devirq, dwc_otg_common_irq,
++                             IRQF_SHARED,
++                             "dwc_otg", dwc_otg_device);
++	if (retval) {
++		DWC_ERROR("request of irq%d failed\n", devirq);
++		retval = -EBUSY;
++		goto fail;
++	} else {
++		dwc_otg_device->common_irq_installed = 1;
++	}
++
++#ifndef IRQF_TRIGGER_LOW
++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
++	dev_dbg(&_dev->dev, "Calling set_irq_type\n");
++	set_irq_type(devirq,
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
++                     IRQT_LOW
++#else
++                     IRQ_TYPE_LEVEL_LOW
++#endif
++                    );
++#endif
++#endif /*IRQF_TRIGGER_LOW*/
++        
++	/*
++	 * Initialize the DWC_otg core.
++	 */
++	dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n");
++	dwc_otg_core_init(dwc_otg_device->core_if);
++		
++#ifndef DWC_HOST_ONLY
++	/*
++	 * Initialize the PCD
++	 */
++	dev_dbg(&_dev->dev, "Calling pcd_init\n");
++	retval = pcd_init(_dev);
++	if (retval != 0) {
++		DWC_ERROR("pcd_init failed\n");
++		dwc_otg_device->pcd = NULL;
++		goto fail;
++	}	
++#endif
++#ifndef DWC_DEVICE_ONLY
++	/*
++	 * Initialize the HCD
++	 */
++	dev_dbg(&_dev->dev, "Calling hcd_init\n");
++	retval = hcd_init(_dev);
++	if (retval != 0) {
++		DWC_ERROR("hcd_init failed\n");
++		dwc_otg_device->hcd = NULL;
++		goto fail;
++	}
++#endif
++        /* Recover from drvdata having been overwritten by hcd_init() */
++#ifdef LM_INTERFACE
++	lm_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PLATFORM_INTERFACE)
++	platform_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PCI_INTERFACE)
++	pci_set_drvdata(_dev, dwc_otg_device);
++	dwc_otg_device->os_dep.pcidev = _dev;
++#endif
++
++	/*
++	 * Enable the global interrupt after all the interrupt
++	 * handlers are installed if there is no ADP support else 
++	 * perform initial actions required for Internal ADP logic.
++	 */
++	if (!dwc_otg_get_param_adp_enable(dwc_otg_device->core_if)) {	
++	        dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n");
++		dwc_otg_enable_global_interrupts(dwc_otg_device->core_if);
++	        dev_dbg(&_dev->dev, "Done\n");
++	} else
++		dwc_otg_adp_start(dwc_otg_device->core_if, 
++							dwc_otg_is_host_mode(dwc_otg_device->core_if));
++
++	return 0;
++
++fail:
++	dwc_otg_driver_remove(_dev);
++	return retval;
++}
++
++/**
++ * This structure defines the methods to be called by a bus driver
++ * during the lifecycle of a device on that bus. Both drivers and
++ * devices are registered with a bus driver. The bus driver matches
++ * devices to drivers based on information in the device and driver
++ * structures.
++ *
++ * The probe function is called when the bus driver matches a device
++ * to this driver. The remove function is called when a device is
++ * unregistered with the bus driver.
++ */
++#ifdef LM_INTERFACE
++static struct lm_driver dwc_otg_driver = {
++	.drv = {.name = (char *)dwc_driver_name,},
++	.probe = dwc_otg_driver_probe,
++	.remove = dwc_otg_driver_remove,
++        // 'suspend' and 'resume' absent
++};
++#elif defined(PCI_INTERFACE)
++static const struct pci_device_id pci_ids[] = { {
++						 PCI_DEVICE(0x16c3, 0xabcd),
++						 .driver_data =
++						 (unsigned long)0xdeadbeef,
++						 }, { /* end: all zeroes */ }
++};
++
++MODULE_DEVICE_TABLE(pci, pci_ids);
++
++/* pci driver glue; this is a "new style" PCI driver module */
++static struct pci_driver dwc_otg_driver = {
++	.name = "dwc_otg",
++	.id_table = pci_ids,
++
++	.probe = dwc_otg_driver_probe,
++	.remove = dwc_otg_driver_remove,
++
++	.driver = {
++		   .name = (char *)dwc_driver_name,
++		   },
++};
++#elif defined(PLATFORM_INTERFACE)
++static struct platform_device_id platform_ids[] = {
++        {
++              .name = "bcm2708_usb",
++              .driver_data = (kernel_ulong_t) 0xdeadbeef,
++        },
++        { /* end: all zeroes */ }
++};
++MODULE_DEVICE_TABLE(platform, platform_ids);
++
++static struct platform_driver dwc_otg_driver = {
++	.driver = {
++		.name = (char *)dwc_driver_name,
++		},
++        .id_table = platform_ids,
++                        
++	.probe = dwc_otg_driver_probe,
++	.remove = dwc_otg_driver_remove,
++        // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early' 
++};
++#endif
++
++/**
++ * This function is called when the dwc_otg_driver is installed with the
++ * insmod command. It registers the dwc_otg_driver structure with the
++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
++ * to be called. In addition, the bus driver will automatically expose
++ * attributes defined for the device and driver in the special sysfs file
++ * system.
++ *
++ * @return
++ */
++static int __init dwc_otg_driver_init(void)
++{
++	int retval = 0;
++	int error;
++        struct device_driver *drv;
++	printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name,
++	       DWC_DRIVER_VERSION,
++#ifdef LM_INTERFACE
++               "logicmodule");
++	retval = lm_driver_register(&dwc_otg_driver);
++        drv = &dwc_otg_driver.drv;
++#elif defined(PCI_INTERFACE)
++               "pci");
++	retval = pci_register_driver(&dwc_otg_driver);
++        drv = &dwc_otg_driver.driver;
++#elif defined(PLATFORM_INTERFACE)
++               "platform");
++	retval = platform_driver_register(&dwc_otg_driver);
++        drv = &dwc_otg_driver.driver;
++#endif
++	if (retval < 0) {
++		printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++		return retval;
++	}
++	printk(KERN_DEBUG "dwc_otg: FIQ %s\n", fiq_fix_enable ? "enabled":"disabled");
++	printk(KERN_DEBUG "dwc_otg: NAK holdoff %s\n", nak_holdoff_enable ? "enabled":"disabled");
++
++	error = driver_create_file(drv, &driver_attr_version);
++#ifdef DEBUG
++	error = driver_create_file(drv, &driver_attr_debuglevel);
++#endif
++	return retval;
++}
++
++module_init(dwc_otg_driver_init);
++
++/**
++ * This function is called when the driver is removed from the kernel
++ * with the rmmod command. The driver unregisters itself with its bus
++ * driver.
++ *
++ */
++static void __exit dwc_otg_driver_cleanup(void)
++{
++	printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n");
++
++#ifdef LM_INTERFACE
++	driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version);
++	lm_driver_unregister(&dwc_otg_driver);
++#elif defined(PCI_INTERFACE)
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++	pci_unregister_driver(&dwc_otg_driver);
++#elif defined(PLATFORM_INTERFACE)
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++	platform_driver_unregister(&dwc_otg_driver);
++#endif
++
++	printk(KERN_INFO "%s module removed\n", dwc_driver_name);
++}
++
++module_exit(dwc_otg_driver_cleanup);
++
++MODULE_DESCRIPTION(DWC_DRIVER_DESC);
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE("GPL");
++
++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
++module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
++MODULE_PARM_DESC(opt, "OPT Mode");
++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
++
++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int,
++		   0444);
++MODULE_PARM_DESC(dma_desc_enable,
++		 "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
++
++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int,
++		   0444);
++MODULE_PARM_DESC(dma_burst_size,
++		 "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
++module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++module_param_named(host_support_fs_ls_low_power,
++		   dwc_otg_module_params.host_support_fs_ls_low_power, int,
++		   0444);
++MODULE_PARM_DESC(host_support_fs_ls_low_power,
++		 "Support Low Power w/FS or LS 0=Support 1=Don't Support");
++module_param_named(host_ls_low_power_phy_clk,
++		   dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
++MODULE_PARM_DESC(host_ls_low_power_phy_clk,
++		 "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
++module_param_named(enable_dynamic_fifo,
++		   dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int,
++		   0444);
++MODULE_PARM_DESC(data_fifo_size,
++		 "Total number of words in the data FIFO memory 32-32768");
++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size,
++		   int, 0444);
++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(dev_nperio_tx_fifo_size,
++		   dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_nperio_tx_fifo_size,
++		 "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(dev_perio_tx_fifo_size_1,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_2,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_3,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_4,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_5,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_6,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_7,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_8,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_9,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_10,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_11,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_12,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_13,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_14,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_15,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size,
++		   int, 0444);
++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(host_nperio_tx_fifo_size,
++		   dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_nperio_tx_fifo_size,
++		 "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(host_perio_tx_fifo_size,
++		   dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_perio_tx_fifo_size,
++		 "Number of words in the host periodic Tx FIFO 16-32768");
++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size,
++		   int, 0444);
++/** @todo Set the max to 512K, modify checks */
++MODULE_PARM_DESC(max_transfer_size,
++		 "The maximum transfer size supported in bytes 2047-65535");
++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count,
++		   int, 0444);
++MODULE_PARM_DESC(max_packet_count,
++		 "The maximum number of packets in a transfer 15-511");
++module_param_named(host_channels, dwc_otg_module_params.host_channels, int,
++		   0444);
++MODULE_PARM_DESC(host_channels,
++		 "The number of host channel registers to use 1-16");
++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int,
++		   0444);
++MODULE_PARM_DESC(dev_endpoints,
++		 "The number of endpoints in addition to EP0 available for device mode 1-15");
++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int,
++		   0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ddr,
++		 "ULPI at double or single data rate 0=Single 1=Double");
++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus,
++		   int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ext_vbus,
++		 "ULPI PHY using internal or external vbus 0=Internal");
++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
++module_param_named(debug, g_dbg_lvl, int, 0444);
++MODULE_PARM_DESC(debug, "");
++
++module_param_named(en_multiple_tx_fifo,
++		   dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
++MODULE_PARM_DESC(en_multiple_tx_fifo,
++		 "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
++module_param_named(dev_tx_fifo_size_1,
++		   dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_2,
++		   dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_3,
++		   dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_4,
++		   dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_5,
++		   dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_6,
++		   dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_7,
++		   dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_8,
++		   dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_9,
++		   dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_10,
++		   dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_11,
++		   dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_12,
++		   dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_13,
++		   dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_14,
++		   dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_15,
++		   dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
++
++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
++MODULE_PARM_DESC(thr_ctl,
++		 "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int,
++		   0444);
++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int,
++		   0444);
++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
++
++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
++module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444);
++MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled");
++module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444);
++MODULE_PARM_DESC(ic_usb_cap,
++		 "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled");
++module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int,
++		   0444);
++MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio");
++module_param_named(power_down, dwc_otg_module_params.power_down, int, 0444);
++MODULE_PARM_DESC(power_down, "Power Down Mode");
++module_param_named(reload_ctl, dwc_otg_module_params.reload_ctl, int, 0444);
++MODULE_PARM_DESC(reload_ctl, "HFIR Reload Control");
++module_param_named(dev_out_nak, dwc_otg_module_params.dev_out_nak, int, 0444);
++MODULE_PARM_DESC(dev_out_nak, "Enable Device OUT NAK");
++module_param_named(cont_on_bna, dwc_otg_module_params.cont_on_bna, int, 0444);
++MODULE_PARM_DESC(cont_on_bna, "Enable Enable Continue on BNA");
++module_param_named(ahb_single, dwc_otg_module_params.ahb_single, int, 0444);
++MODULE_PARM_DESC(ahb_single, "Enable AHB Single Support");
++module_param_named(adp_enable, dwc_otg_module_params.adp_enable, int, 0444);
++MODULE_PARM_DESC(adp_enable, "ADP Enable 0=ADP Disabled 1=ADP Enabled");
++module_param_named(otg_ver, dwc_otg_module_params.otg_ver, int, 0444);
++MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0");
++module_param(microframe_schedule, bool, 0444);
++MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler");
++
++module_param(fiq_fix_enable, bool, 0444);
++MODULE_PARM_DESC(fiq_fix_enable, "Enable the fiq fix");
++module_param(nak_holdoff_enable, bool, 0444);
++MODULE_PARM_DESC(nak_holdoff_enable, "Enable the NAK holdoff");
++
++/** @page "Module Parameters"
++ *
++ * The following parameters may be specified when starting the module.
++ * These parameters define how the DWC_otg controller should be
++ * configured. Parameter values are passed to the CIL initialization
++ * function dwc_otg_cil_init
++ *
++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
++ *
++
++ <table>
++ <tr><td>Parameter Name</td><td>Meaning</td></tr>
++
++ <tr>
++ <td>otg_cap</td>
++ <td>Specifies the OTG capabilities. The driver will automatically detect the
++ value for this parameter if none is specified.
++ - 0: HNP and SRP capable (default, if available)
++ - 1: SRP Only capable
++ - 2: No HNP/SRP capable
++ </td></tr>
++
++ <tr>
++ <td>dma_enable</td>
++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Slave
++ - 1: DMA (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dma_burst_size</td>
++ <td>The DMA Burst size (applicable only for External DMA Mode).
++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ </td></tr>
++
++ <tr>
++ <td>speed</td>
++ <td>Specifies the maximum speed of operation in host and device mode. The
++ actual speed depends on the speed of the attached device and the value of
++ phy_type.
++ - 0: High Speed (default)
++ - 1: Full Speed
++ </td></tr>
++
++ <tr>
++ <td>host_support_fs_ls_low_power</td>
++ <td>Specifies whether low power mode is supported when attached to a Full
++ Speed or Low Speed device in host mode.
++ - 0: Don't support low power mode (default)
++ - 1: Support low power mode
++ </td></tr>
++
++ <tr>
++ <td>host_ls_low_power_phy_clk</td>
++ <td>Specifies the PHY clock rate in low power mode when connected to a Low
++ Speed device in host mode. This parameter is applicable only if
++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
++ - 0: 48 MHz (default)
++ - 1: 6 MHz
++ </td></tr>
++
++ <tr>
++ <td>enable_dynamic_fifo</td>
++ <td> Specifies whether FIFOs may be resized by the driver software.
++ - 0: Use cC FIFO size parameters
++ - 1: Allow dynamic FIFO sizing (default)
++ </td></tr>
++
++ <tr>
++ <td>data_fifo_size</td>
++ <td>Total number of 4-byte words in the data FIFO memory. This memory
++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
++ - Values: 32 to 32768 (default 8192)
++
++ Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ </td></tr>
++
++ <tr>
++ <td>dev_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1064)
++ </td></tr>
++
++ <tr>
++ <td>dev_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
++ dynamic FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++ <tr>
++ <td>host_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
++ dynamic FIFO sizing is enabled in the core.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_perio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>max_transfer_size</td>
++ <td>The maximum transfer size supported in bytes.
++ - Values: 2047 to 65,535 (default 65,535)
++ </td></tr>
++
++ <tr>
++ <td>max_packet_count</td>
++ <td>The maximum number of packets in a transfer.
++ - Values: 15 to 511 (default 511)
++ </td></tr>
++
++ <tr>
++ <td>host_channels</td>
++ <td>The number of host channel registers to use.
++ - Values: 1 to 16 (default 12)
++
++ Note: The FPGA configuration supports a maximum of 12 host channels.
++ </td></tr>
++
++ <tr>
++ <td>dev_endpoints</td>
++ <td>The number of endpoints in addition to EP0 available for device mode
++ operations.
++ - Values: 1 to 15 (default 6 IN and OUT)
++
++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
++ addition to EP0.
++ </td></tr>
++
++ <tr>
++ <td>phy_type</td>
++ <td>Specifies the type of PHY interface to use. By default, the driver will
++ automatically detect the phy_type.
++ - 0: Full Speed
++ - 1: UTMI+ (default, if available)
++ - 2: ULPI
++ </td></tr>
++
++ <tr>
++ <td>phy_utmi_width</td>
++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
++ phy_type of UTMI+. Also, this parameter is applicable only if the
++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
++ core has been configured to work at either data path width.
++ - Values: 8 or 16 bits (default 16)
++ </td></tr>
++
++ <tr>
++ <td>phy_ulpi_ddr</td>
++ <td>Specifies whether the ULPI operates at double or single data rate. This
++ parameter is only applicable if phy_type is ULPI.
++ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
++ - 1: double data rate ULPI interface with 4 bit wide data bus
++ </td></tr>
++
++ <tr>
++ <td>i2c_enable</td>
++ <td>Specifies whether to use the I2C interface for full speed PHY. This
++ parameter is only applicable if PHY_TYPE is FS.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>ulpi_fs_ls</td>
++ <td>Specifies whether to use ULPI FS/LS mode only.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>ts_dline</td>
++ <td>Specifies whether term select D-Line pulsing for all PHYs is enabled.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++ 
++ <tr>
++ <td>en_multiple_tx_fifo</td>
++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Disabled
++ - 1: Enabled (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++ <tr>
++ <td>tx_thr_length</td>
++ <td>Transmit Threshold length in 32 bit double words
++ - Values: 8 to 128 (default 64)
++ </td></tr>
++
++ <tr>
++ <td>rx_thr_length</td>
++ <td>Receive Threshold length in 32 bit double words
++ - Values: 8 to 128 (default 64)
++ </td></tr>
++
++<tr>
++ <td>thr_ctl</td>
++ <td>Specifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of 
++ this parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and
++ Rx transfers accordingly.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - Values: 0 to 7 (default 0)
++ Bit values indicate:
++ - 0: Thresholding disabled
++ - 1: Thresholding enabled
++ </td></tr>
++
++<tr>
++ <td>dma_desc_enable</td>
++ <td>Specifies whether to enable Descriptor DMA mode.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Descriptor DMA disabled
++ - 1: Descriptor DMA (default, if available)
++ </td></tr>
++
++<tr>
++ <td>mpi_enable</td>
++ <td>Specifies whether to enable MPI enhancement mode.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: MPI disabled (default)
++ - 1: MPI enable
++ </td></tr>
++
++<tr>
++ <td>pti_enable</td>
++ <td>Specifies whether to enable PTI enhancement support.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: PTI disabled (default)
++ - 1: PTI enable
++ </td></tr>
++
++<tr>
++ <td>lpm_enable</td>
++ <td>Specifies whether to enable LPM support.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: LPM disabled
++ - 1: LPM enable (default, if available)
++ </td></tr>
++
++<tr>
++ <td>ic_usb_cap</td>
++ <td>Specifies whether to enable IC_USB capability.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: IC_USB disabled (default, if available)
++ - 1: IC_USB enable 
++ </td></tr>
++
++<tr>
++ <td>ahb_thr_ratio</td>
++ <td>Specifies AHB Threshold ratio.
++ - Values: 0 to 3 (default 0)
++ </td></tr>
++
++<tr>
++ <td>power_down</td>
++ <td>Specifies Power Down(Hibernation) Mode.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Power Down disabled (default)
++ - 2: Power Down enabled
++ </td></tr>
++ 
++ <tr>
++ <td>reload_ctl</td>
++ <td>Specifies whether dynamic reloading of the HFIR register is allowed during
++ run time. The driver will automatically detect the value for this parameter if
++ none is specified. In case the HFIR value is reloaded when HFIR.RldCtrl == 1'b0
++ the core might misbehave.
++ - 0: Reload Control disabled (default)
++ - 1: Reload Control enabled
++ </td></tr>
++
++ <tr>
++ <td>dev_out_nak</td>
++ <td>Specifies whether  Device OUT NAK enhancement enabled or no.
++ The driver will automatically detect the value for this parameter if
++ none is specified. This parameter is valid only when OTG_EN_DESC_DMA == 1b1.
++ - 0: The core does not set NAK after Bulk OUT transfer complete (default)
++ - 1: The core sets NAK after Bulk OUT transfer complete
++ </td></tr>
++
++ <tr>
++ <td>cont_on_bna</td>
++ <td>Specifies whether Enable Continue on BNA enabled or no. 
++ After receiving BNA interrupt the core disables the endpoint,when the
++ endpoint is re-enabled by the application the  
++ - 0: Core starts processing from the DOEPDMA descriptor (default)
++ - 1: Core starts processing from the descriptor which received the BNA.
++ This parameter is valid only when OTG_EN_DESC_DMA == 1b1.
++ </td></tr>
++
++ <tr>
++ <td>ahb_single</td>
++ <td>This bit when programmed supports SINGLE transfers for remainder data
++ in a transfer for DMA mode of operation. 
++ - 0: The remainder data will be sent using INCR burst size (default)
++ - 1: The remainder data will be sent using SINGLE burst size.
++ </td></tr>
++
++<tr>
++ <td>adp_enable</td>
++ <td>Specifies whether ADP feature is enabled.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: ADP feature disabled (default)
++ - 1: ADP feature enabled
++ </td></tr>
++
++  <tr>
++ <td>otg_ver</td>
++ <td>Specifies whether OTG is performing as USB OTG Revision 2.0 or Revision 1.3
++ USB OTG device.
++ - 0: OTG 2.0 support disabled (default)
++ - 1: OTG 2.0 support enabled 
++ </td></tr>
++
++*/
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_driver.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_driver.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_driver.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_driver.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,86 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
++ * $Revision: #19 $
++ * $Date: 2010/11/15 $
++ * $Change: 1627671 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_DRIVER_H__
++#define __DWC_OTG_DRIVER_H__
++
++/** @file
++ * This file contains the interface to the Linux driver.
++ */
++#include "dwc_otg_os_dep.h"
++#include "dwc_otg_core_if.h"
++
++/* Type declarations */
++struct dwc_otg_pcd;
++struct dwc_otg_hcd;
++
++/**
++ * This structure is a wrapper that encapsulates the driver components used to
++ * manage a single DWC_otg controller.
++ */
++typedef struct dwc_otg_device {
++	/** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE
++	 * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD
++	 * require this. */
++	struct os_dependent os_dep;
++
++	/** Pointer to the core interface structure. */
++	dwc_otg_core_if_t *core_if;
++
++	/** Pointer to the PCD structure. */
++	struct dwc_otg_pcd *pcd;
++
++	/** Pointer to the HCD structure. */
++	struct dwc_otg_hcd *hcd;
++
++	/** Flag to indicate whether the common IRQ handler is installed. */
++	uint8_t common_irq_installed;
++
++} dwc_otg_device_t;
++
++/*We must clear S3C24XX_EINTPEND external interrupt register 
++ * because after clearing in this register trigerred IRQ from 
++ * H/W core in kernel interrupt can be occured again before OTG
++ * handlers clear all IRQ sources of Core registers because of
++ * timing latencies and Low Level IRQ Type.
++ */
++#ifdef CONFIG_MACH_IPMATE
++#define  S3C2410X_CLEAR_EINTPEND()   \
++do { \
++	__raw_writel(1UL << 11,S3C24XX_EINTPEND); \
++} while (0)
++#else
++#define  S3C2410X_CLEAR_EINTPEND()   do { } while (0)
++#endif
++
++#endif
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,3533 @@
++
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
++ * $Revision: #104 $
++ * $Date: 2011/10/24 $
++ * $Change: 1871159 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/** @file
++ * This file implements HCD Core. All code in this file is portable and doesn't
++ * use any OS specific functions.
++ * Interface provided by HCD Core is defined in <code><hcd_if.h></code>
++ * header file.
++ */
++
++#include <linux/usb.h>
++#include <linux/usb/hcd.h>
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++extern bool microframe_schedule, nak_holdoff_enable;
++
++//#define DEBUG_HOST_CHANNELS
++#ifdef DEBUG_HOST_CHANNELS
++static int last_sel_trans_num_per_scheduled = 0;
++static int last_sel_trans_num_nonper_scheduled = 0;
++static int last_sel_trans_num_avail_hc_at_start = 0;
++static int last_sel_trans_num_avail_hc_at_end = 0;
++#endif /* DEBUG_HOST_CHANNELS */
++
++extern int g_next_sched_frame, g_np_count, g_np_sent;
++
++dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void)
++{
++	return DWC_ALLOC(sizeof(dwc_otg_hcd_t));
++}
++
++/**
++ * Connection timeout function.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.
++ */
++void dwc_otg_hcd_connect_timeout(void *ptr)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr);
++	DWC_PRINTF("Connect Timeout\n");
++	__DWC_ERROR("Device Not Connected/Responding\n");
++}
++
++#if defined(DEBUG)
++static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	if (qh->channel != NULL) {
++		dwc_hc_t *hc = qh->channel;
++		dwc_list_link_t *item;
++		dwc_otg_qh_t *qh_item;
++		int num_channels = hcd->core_if->core_params->host_channels;
++		int i;
++
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t hcchar;
++		hcsplt_data_t hcsplt;
++		hctsiz_data_t hctsiz;
++		uint32_t hcdma;
++
++		hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		hcdma = DWC_READ_REG32(&hc_regs->hcdma);
++
++		DWC_PRINTF("  Assigned to channel %p:\n", hc);
++		DWC_PRINTF("    hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32,
++			   hcsplt.d32);
++		DWC_PRINTF("    hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32,
++			   hcdma);
++		DWC_PRINTF("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			   hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINTF("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINTF("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINTF("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINTF("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINTF("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINTF("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINTF("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINTF("    qh: %p\n", hc->qh);
++		DWC_PRINTF("  NP inactive sched:\n");
++		DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) {
++			qh_item =
++			    DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINTF("    %p\n", qh_item);
++		}
++		DWC_PRINTF("  NP active sched:\n");
++		DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) {
++			qh_item =
++			    DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINTF("    %p\n", qh_item);
++		}
++		DWC_PRINTF("  Channels: \n");
++		for (i = 0; i < num_channels; i++) {
++			dwc_hc_t *hc = hcd->hc_ptr_array[i];
++			DWC_PRINTF("    %2d: %p\n", i, hc);
++		}
++	}
++}
++#else
++#define dump_channel_info(hcd, qh)
++#endif /* DEBUG */
++
++/**
++ * Work queue function for starting the HCD when A-Cable is connected.
++ * The hcd_start() must be called in a process context.
++ */
++static void hcd_start_func(void *_vp)
++{
++	dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd);
++	if (hcd) {
++		hcd->fops->start(hcd);
++	}
++}
++
++static void del_xfer_timers(dwc_otg_hcd_t * hcd)
++{
++#ifdef DEBUG
++	int i;
++	int num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]);
++	}
++#endif
++}
++
++static void del_timers(dwc_otg_hcd_t * hcd)
++{
++	del_xfer_timers(hcd);
++	DWC_TIMER_CANCEL(hcd->conn_timer);
++}
++
++/**
++ * Processes all the URBs in a single list of QHs. Completes them with
++ * -ETIMEDOUT and frees the QTD.
++ */
++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list)
++{
++	dwc_list_link_t *qh_item;
++	dwc_otg_qh_t *qh;
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++
++	DWC_LIST_FOREACH(qh_item, qh_list) {
++		qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry);
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp,
++					 &qh->qtd_list, qtd_list_entry) {
++			qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++			if (qtd->urb != NULL) {
++				hcd->fops->complete(hcd, qtd->urb->priv,
++						    qtd->urb, -DWC_E_TIMEOUT);
++				dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++			}
++
++		}
++	}
++}
++
++/**
++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
++ * and periodic schedules. The QTD associated with each URB is removed from
++ * the schedule and freed. This function may be called when a disconnect is
++ * detected or when the HCD is being stopped.
++ */
++static void kill_all_urbs(dwc_otg_hcd_t * hcd)
++{
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
++}
++
++/**
++ * Start the connection timer.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.  The
++ * timer is deleted if a port connect interrupt occurs before the
++ * timer expires.
++ */
++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd)
++{
++	DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ );
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_session_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd = p;
++	dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
++	return 1;
++}
++
++/**
++ * HCD Callback function for starting the HCD when A-Cable is
++ * connected.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = p;
++	dwc_otg_core_if_t *core_if;
++	hprt0_data_t hprt0;
++
++	core_if = dwc_otg_hcd->core_if;
++
++	if (core_if->op_state == B_HOST) {
++		/*
++		 * Reset the port.  During a HNP mode switch the reset
++		 * needs to occur within 1ms and have a duration of at
++		 * least 50ms.
++		 */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtrst = 1;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	}
++	DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg,
++				   hcd_start_func, dwc_otg_hcd, 50,
++				   "start hcd");
++
++	return 1;
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_disconnect_cb(void *p)
++{
++	gintsts_data_t intr;
++	dwc_otg_hcd_t *dwc_otg_hcd = p;
++
++	/*
++	 * Set status flags for the hub driver.
++	 */
++	dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++	dwc_otg_hcd->flags.b.port_connect_status = 0;
++
++	/*
++	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
++	 * interrupt mask and status bits and disabling subsequent host
++	 * channel interrupts.
++	 */
++	intr.d32 = 0;
++	intr.b.nptxfempty = 1;
++	intr.b.ptxfempty = 1;
++	intr.b.hcintr = 1;
++	DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk,
++			 intr.d32, 0);
++	DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintsts,
++			 intr.d32, 0);
++
++	del_timers(dwc_otg_hcd);
++
++	/*
++	 * Turn off the vbus power only if the core has transitioned to device
++	 * mode. If still in host mode, need to keep power on to detect a
++	 * reconnection.
++	 */
++	if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
++		if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
++			hprt0_data_t hprt0 = {.d32 = 0 };
++			DWC_PRINTF("Disconnect: PortPower off\n");
++			hprt0.b.prtpwr = 0;
++			DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0,
++					hprt0.d32);
++		}
++
++		dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
++	}
++
++	/* Respond with an error status to all URBs in the schedule. */
++	kill_all_urbs(dwc_otg_hcd);
++
++	if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
++		/* Clean up any host channels that were in use. */
++		int num_channels;
++		int i;
++		dwc_hc_t *channel;
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t hcchar;
++
++		num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++
++		if (!dwc_otg_hcd->core_if->dma_enable) {
++			/* Flush out any channel requests in slave mode. */
++			for (i = 0; i < num_channels; i++) {
++				channel = dwc_otg_hcd->hc_ptr_array[i];
++				if (DWC_CIRCLEQ_EMPTY_ENTRY
++				    (channel, hc_list_entry)) {
++					hc_regs =
++					    dwc_otg_hcd->core_if->
++					    host_if->hc_regs[i];
++					hcchar.d32 =
++					    DWC_READ_REG32(&hc_regs->hcchar);
++					if (hcchar.b.chen) {
++						hcchar.b.chen = 0;
++						hcchar.b.chdis = 1;
++						hcchar.b.epdir = 0;
++						DWC_WRITE_REG32
++						    (&hc_regs->hcchar,
++						     hcchar.d32);
++					}
++				}
++			}
++		}
++
++		for (i = 0; i < num_channels; i++) {
++			channel = dwc_otg_hcd->hc_ptr_array[i];
++			if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) {
++				hc_regs =
++				    dwc_otg_hcd->core_if->host_if->hc_regs[i];
++				hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++				if (hcchar.b.chen) {
++					/* Halt the channel. */
++					hcchar.b.chdis = 1;
++					DWC_WRITE_REG32(&hc_regs->hcchar,
++							hcchar.d32);
++				}
++
++				dwc_otg_hc_cleanup(dwc_otg_hcd->core_if,
++						   channel);
++				DWC_CIRCLEQ_INSERT_TAIL
++				    (&dwc_otg_hcd->free_hc_list, channel,
++				     hc_list_entry);
++				/*
++				 * Added for Descriptor DMA to prevent channel double cleanup
++				 * in release_channel_ddma(). Which called from ep_disable
++				 * when device disconnect.
++				 */
++				channel->qh = NULL;
++			}
++		}
++	}
++
++	if (dwc_otg_hcd->fops->disconnect) {
++		dwc_otg_hcd->fops->disconnect(dwc_otg_hcd);
++	}
++
++	return 1;
++}
++
++/**
++ * HCD Callback function for stopping the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_stop_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = p;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd_stop(dwc_otg_hcd);
++	return 1;
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * HCD Callback function for sleep of HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int dwc_otg_hcd_sleep_cb(void *p)
++{
++	dwc_otg_hcd_t *hcd = p;
++
++	dwc_otg_hcd_free_hc_from_lpm(hcd);
++
++	return 0;
++}
++#endif
++
++
++/**
++ * HCD Callback function for Remote Wakeup.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int dwc_otg_hcd_rem_wakeup_cb(void *p)
++{
++	dwc_otg_hcd_t *hcd = p;
++
++	if (hcd->core_if->lx_state == DWC_OTG_L2) {
++		hcd->flags.b.port_suspend_change = 1;
++	}
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	else {
++		hcd->flags.b.port_l1_change = 1;
++	}
++#endif
++	return 0;
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd)
++{
++	hprt0_data_t hprt0 = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
++ 
++	/*
++	 * The root hub should be disconnected before this function is called.
++	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
++	 * and the QH lists (via ..._hcd_endpoint_disable).
++	 */
++
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts(hcd->core_if);
++
++	/* Turn off the vbus power */
++	DWC_PRINTF("PortPower off\n");
++	hprt0.b.prtpwr = 0;
++	DWC_WRITE_REG32(hcd->core_if->host_if->hprt0, hprt0.d32);
++	dwc_mdelay(1);
++}
++
++int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd,
++			    dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle,
++			    int atomic_alloc)
++{
++	dwc_irqflags_t flags;
++	int retval = 0;
++	uint8_t needs_scheduling = 0;
++	dwc_otg_transaction_type_e tr_type;
++	dwc_otg_qtd_t *qtd;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++#ifdef DEBUG /* integrity checks (Broadcom) */
++	if (NULL == hcd->core_if) {
++		DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n");
++		/* No longer connected. */
++		return -DWC_E_INVALID;
++	}
++#endif
++	if (!hcd->flags.b.port_connect_status) {
++		/* No longer connected. */
++		DWC_ERROR("Not connected\n");
++		return -DWC_E_NO_DEVICE;
++	}
++
++	qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb, atomic_alloc);
++	if (qtd == NULL) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
++		return -DWC_E_NO_MEMORY;
++	}
++#ifdef DEBUG /* integrity checks (Broadcom) */
++	if (qtd->urb == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n");
++		return -DWC_E_NO_MEMORY;
++	}
++	if (qtd->urb->priv == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n");
++		return -DWC_E_NO_MEMORY;
++	}
++#endif
++	intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk);
++	if(!intr_mask.b.sofintr) needs_scheduling = 1;
++	if((((dwc_otg_qh_t *)ep_handle)->ep_type == UE_BULK) && !(qtd->urb->flags & URB_GIVEBACK_ASAP))
++		/* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */
++		needs_scheduling = 0;
++
++	retval = dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle, atomic_alloc);
++            // creates a new queue in ep_handle if it doesn't exist already
++	if (retval < 0) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
++			  "Error status %d\n", retval);
++		dwc_otg_hcd_qtd_free(qtd);
++		return retval;
++	}
++
++	if(needs_scheduling) {
++		DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++		tr_type = dwc_otg_hcd_select_transactions(hcd);
++		if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++			dwc_otg_hcd_queue_transactions(hcd, tr_type);
++		}
++		DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	}
++	return retval;
++}
++
++int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd,
++			    dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	dwc_otg_qh_t *qh;
++	dwc_otg_qtd_t *urb_qtd;
++	BUG_ON(!hcd);
++	BUG_ON(!dwc_otg_urb);
++
++#ifdef DEBUG /* integrity checks (Broadcom) */
++
++	if (hcd == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n");
++		return -DWC_E_INVALID;
++	}
++	if (dwc_otg_urb == NULL) { 
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n");
++		return -DWC_E_INVALID;
++	}
++	if (dwc_otg_urb->qtd == NULL) { 
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n");
++		return -DWC_E_INVALID;
++	}
++	urb_qtd = dwc_otg_urb->qtd;
++	BUG_ON(!urb_qtd);
++	if (urb_qtd->qh == NULL) { 
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n");
++		return -DWC_E_INVALID;
++	}
++#else
++	urb_qtd = dwc_otg_urb->qtd;
++	BUG_ON(!urb_qtd);
++#endif
++	qh = urb_qtd->qh;
++	BUG_ON(!qh);
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		if (urb_qtd->in_process) {
++			dump_channel_info(hcd, qh);
++		}
++	}
++#ifdef DEBUG /* integrity checks (Broadcom) */
++	if (hcd->core_if == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n");
++		return -DWC_E_INVALID;
++	}
++#endif
++	if (urb_qtd->in_process && qh->channel) {
++		/* The QTD is in process (it has been assigned to a channel). */
++		if (hcd->flags.b.port_connect_status) {
++			/*
++			 * If still connected (i.e. in host mode), halt the
++			 * channel so it can be used for other transfers. If
++			 * no longer connected, the host registers can't be
++			 * written to halt the channel since the core is in
++			 * device mode.
++			 */
++			dwc_otg_hc_halt(hcd->core_if, qh->channel,
++					DWC_OTG_HC_XFER_URB_DEQUEUE);
++		}
++	}
++
++	/*
++	 * Free the QTD and clean up the associated QH. Leave the QH in the
++	 * schedule if it has any remaining QTDs.
++	 */
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - "
++                    "delete %sQueue handler\n",
++                    hcd->core_if->dma_desc_enable?"DMA ":"");
++	if (!hcd->core_if->dma_desc_enable) {
++		uint8_t b = urb_qtd->in_process;
++		dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh);
++		if (b) {
++			dwc_otg_hcd_qh_deactivate(hcd, qh, 0);
++			qh->channel = NULL;
++		} else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		}
++	} else {
++		dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh);
++	}
++	return 0;
++}
++
++int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle,
++				 int retry)
++{
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	int retval = 0;
++	dwc_irqflags_t flags;
++
++	if (retry < 0) {
++		retval = -DWC_E_INVALID;
++		goto done;
++	}
++
++	if (!qh) {
++		retval = -DWC_E_INVALID;
++		goto done;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++
++	while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) {
++		DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++		retry--;
++		dwc_msleep(5);
++		DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	}
++
++	dwc_otg_hcd_qh_remove(hcd, qh);
++
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	/*
++	 * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove
++	 * and qh_free to prevent stack dump on DWC_DMA_FREE() with
++	 * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free()
++	 * and dwc_otg_hcd_frame_list_alloc().
++	 */
++	dwc_otg_hcd_qh_free(hcd, qh);
++
++done:
++	return retval;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	int retval = 0;
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	if (!qh)
++		return -DWC_E_INVALID;
++
++	qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	return retval;
++}
++#endif
++
++/**
++ * HCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
++	.start = dwc_otg_hcd_start_cb,
++	.stop = dwc_otg_hcd_stop_cb,
++	.disconnect = dwc_otg_hcd_disconnect_cb,
++	.session_start = dwc_otg_hcd_session_start_cb,
++	.resume_wakeup = dwc_otg_hcd_rem_wakeup_cb,
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	.sleep = dwc_otg_hcd_sleep_cb,
++#endif
++	.p = 0,
++};
++
++/**
++ * Reset tasklet function
++ */
++static void reset_tasklet_func(void *data)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data;
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++
++	DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
++
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtrst = 1;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_mdelay(60);
++
++	hprt0.b.prtrst = 0;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_otg_hcd->flags.b.port_reset_change = 1;
++}
++
++static void completion_tasklet_func(void *ptr)
++{
++	dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) ptr;
++	struct urb *urb;
++	urb_tq_entry_t *item;
++	dwc_irqflags_t flags;
++
++	/* This could just be spin_lock_irq */
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	while (!DWC_TAILQ_EMPTY(&hcd->completed_urb_list)) {
++		item = DWC_TAILQ_FIRST(&hcd->completed_urb_list);
++		urb = item->urb;
++		DWC_TAILQ_REMOVE(&hcd->completed_urb_list, item,
++				urb_tq_entries);
++		DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++		DWC_FREE(item);
++
++		usb_hcd_giveback_urb(hcd->priv, urb, urb->status);
++
++		DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	return;
++}
++
++static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list)
++{
++	dwc_list_link_t *item;
++	dwc_otg_qh_t *qh;
++	dwc_irqflags_t flags;
++
++	if (!qh_list->next) {
++		/* The list hasn't been initialized yet. */
++		return;
++	}
++	/*
++	 * Hold spinlock here. Not needed in that case if bellow 
++	 * function is being called from ISR 
++	 */
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	/* Ensure there are no QTDs or URBs left. */
++	kill_urbs_in_qh_list(hcd, qh_list);
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++
++	DWC_LIST_FOREACH(item, qh_list) {
++		qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
++		dwc_otg_hcd_qh_remove_and_free(hcd, qh);
++	}
++}
++
++/**
++ * Exit from Hibernation if Host did not detect SRP from connected SRP capable
++ * Device during SRP time by host power up.
++ */
++void dwc_otg_hcd_power_up(void *ptr)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return;
++	}
++
++	/* Switch on the voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset the core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Remove reset the core signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	core_if->hibernation_suspend = 0;
++
++	/* Disable PMU */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Enable VBUS */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.dis_vbus = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	core_if->op_state = A_HOST;
++	dwc_otg_core_init(core_if);
++	dwc_otg_enable_global_interrupts(core_if);
++	cil_hcd_start(core_if);
++}
++
++/**
++ * Frees secondary storage associated with the dwc_otg_hcd structure contained
++ * in the struct usb_hcd field.
++ */
++static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int i;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
++
++	del_timers(dwc_otg_hcd);
++
++	/* Free memory for QH/QTD lists */
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
++
++	/* Free memory for the host channels. */
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
++
++#ifdef DEBUG
++		if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) {
++			DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]);
++		}
++#endif
++		if (hc != NULL) {
++			DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n",
++				    i, hc);
++			DWC_FREE(hc);
++		}
++	}
++
++	if (dwc_otg_hcd->core_if->dma_enable) {
++		if (dwc_otg_hcd->status_buf_dma) {
++			DWC_DMA_FREE(DWC_OTG_HCD_STATUS_BUF_SIZE,
++				     dwc_otg_hcd->status_buf,
++				     dwc_otg_hcd->status_buf_dma);
++		}
++	} else if (dwc_otg_hcd->status_buf != NULL) {
++		DWC_FREE(dwc_otg_hcd->status_buf);
++	}
++	DWC_SPINLOCK_FREE(dwc_otg_hcd->channel_lock);
++	DWC_SPINLOCK_FREE(dwc_otg_hcd->lock);
++	/* Set core_if's lock pointer to NULL */
++	dwc_otg_hcd->core_if->lock = NULL;
++
++	DWC_TIMER_FREE(dwc_otg_hcd->conn_timer);
++	DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet);
++	DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet);
++
++#ifdef DWC_DEV_SRPCAP
++	if (dwc_otg_hcd->core_if->power_down == 2 &&
++	    dwc_otg_hcd->core_if->pwron_timer) {
++		DWC_TIMER_FREE(dwc_otg_hcd->core_if->pwron_timer);
++	}
++#endif
++	DWC_FREE(dwc_otg_hcd);
++}
++
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd);
++
++int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if)
++{
++	int retval = 0;
++	int num_channels;
++	int i;
++	dwc_hc_t *channel;
++
++	hcd->lock = DWC_SPINLOCK_ALLOC();
++	hcd->channel_lock = DWC_SPINLOCK_ALLOC();
++        DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n",
++                    hcd, core_if);
++	if (!hcd->lock) {
++		DWC_ERROR("Could not allocate lock for pcd");
++		DWC_FREE(hcd);
++		retval = -DWC_E_NO_MEMORY;
++		goto out;
++	}
++	hcd->core_if = core_if;
++
++	/* Register the HCD CIL Callbacks */
++	dwc_otg_cil_register_hcd_callbacks(hcd->core_if,
++					   &hcd_cil_callbacks, hcd);
++
++	/* Initialize the non-periodic schedule. */
++	DWC_LIST_INIT(&hcd->non_periodic_sched_inactive);
++	DWC_LIST_INIT(&hcd->non_periodic_sched_active);
++
++	/* Initialize the periodic schedule. */
++	DWC_LIST_INIT(&hcd->periodic_sched_inactive);
++	DWC_LIST_INIT(&hcd->periodic_sched_ready);
++	DWC_LIST_INIT(&hcd->periodic_sched_assigned);
++	DWC_LIST_INIT(&hcd->periodic_sched_queued);
++	DWC_TAILQ_INIT(&hcd->completed_urb_list);
++	/*
++	 * Create a host channel descriptor for each host channel implemented
++	 * in the controller. Initialize the channel descriptor array.
++	 */
++	DWC_CIRCLEQ_INIT(&hcd->free_hc_list);
++	num_channels = hcd->core_if->core_params->host_channels;
++	DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array));
++	for (i = 0; i < num_channels; i++) {
++		channel = DWC_ALLOC(sizeof(dwc_hc_t));
++		if (channel == NULL) {
++			retval = -DWC_E_NO_MEMORY;
++			DWC_ERROR("%s: host channel allocation failed\n",
++				  __func__);
++			dwc_otg_hcd_free(hcd);
++			goto out;
++		}
++		channel->hc_num = i;
++		hcd->hc_ptr_array[i] = channel;
++#ifdef DEBUG
++		hcd->core_if->hc_xfer_timer[i] =
++		    DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout,
++				    &hcd->core_if->hc_xfer_info[i]);
++#endif
++		DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i,
++			    channel);
++	}
++
++	/* Initialize the Connection timeout timer. */
++	hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer",
++					  dwc_otg_hcd_connect_timeout, 0);
++
++	printk(KERN_DEBUG "dwc_otg: Microframe scheduler %s\n", microframe_schedule ? "enabled":"disabled");
++	if (microframe_schedule)
++		init_hcd_usecs(hcd);
++
++	/* Initialize reset tasklet. */
++	hcd->reset_tasklet = DWC_TASK_ALLOC("reset_tasklet", reset_tasklet_func, hcd);
++
++	hcd->completion_tasklet = DWC_TASK_ALLOC("completion_tasklet",
++						completion_tasklet_func, hcd);
++#ifdef DWC_DEV_SRPCAP
++	if (hcd->core_if->power_down == 2) {
++		/* Initialize Power on timer for Host power up in case hibernation */
++		hcd->core_if->pwron_timer = DWC_TIMER_ALLOC("PWRON TIMER",
++									dwc_otg_hcd_power_up, core_if);
++	}
++#endif	
++
++	/*
++	 * Allocate space for storing data on status transactions. Normally no
++	 * data is sent, but this space acts as a bit bucket. This must be
++	 * done after usb_add_hcd since that function allocates the DMA buffer
++	 * pool.
++	 */
++	if (hcd->core_if->dma_enable) {
++		hcd->status_buf =
++		    DWC_DMA_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE,
++				  &hcd->status_buf_dma);
++	} else {
++		hcd->status_buf = DWC_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE);
++	}
++	if (!hcd->status_buf) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR("%s: status_buf allocation failed\n", __func__);
++		dwc_otg_hcd_free(hcd);
++		goto out;
++	}
++
++	hcd->otg_port = 1;
++	hcd->frame_list = NULL;
++	hcd->frame_list_dma = 0;
++	hcd->periodic_qh_count = 0;
++out:
++	return retval;
++}
++
++void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd)
++{
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts(hcd->core_if);
++
++	dwc_otg_hcd_free(hcd);
++}
++
++/**
++ * Initializes dynamic portions of the DWC_otg HCD state.
++ */
++static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd)
++{
++	int num_channels;
++	int i;
++	dwc_hc_t *channel;
++	dwc_hc_t *channel_tmp;
++
++	hcd->flags.d32 = 0;
++
++	hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
++	if (!microframe_schedule) {
++		hcd->non_periodic_channels = 0;
++		hcd->periodic_channels = 0;
++	} else {
++		hcd->available_host_channels = hcd->core_if->core_params->host_channels;
++	}
++	/*
++	 * Put all channels in the free channel list and clean up channel
++	 * states.
++	 */
++	DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp,
++				 &hcd->free_hc_list, hc_list_entry) {
++		DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry);
++	}
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		channel = hcd->hc_ptr_array[i];
++		DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel,
++					hc_list_entry);
++		dwc_otg_hc_cleanup(hcd->core_if, channel);
++	}
++
++	/* Initialize the DWC core for host mode operation. */
++	dwc_otg_core_host_init(hcd->core_if);
++
++	/* Set core_if's lock pointer to the hcd->lock */
++	hcd->core_if->lock = hcd->lock;
++}
++
++/**
++ * Assigns transactions from a QTD to a free host channel and initializes the
++ * host channel to perform the transactions. The host channel is removed from
++ * the free list.
++ *
++ * @param hcd The HCD state structure.
++ * @param qh Transactions from the first QTD for this QH are selected and
++ * assigned to a free host channel.
++ */
++static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	dwc_hc_t *hc;
++	dwc_otg_qtd_t *qtd;
++	dwc_otg_hcd_urb_t *urb;
++	void* ptr = NULL;
++
++	qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++	
++	urb = qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length);
++
++	if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info))
++		urb->actual_length = urb->length;
++
++
++	hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list);
++
++	/* Remove the host channel from the free list. */
++	DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry);
++
++	qh->channel = hc;
++
++	qtd->in_process = 1;
++
++	/*
++	 * Use usb_pipedevice to determine device address. This address is
++	 * 0 before the SET_ADDRESS command and the correct address afterward.
++	 */
++	hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info);
++	hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info);
++	hc->speed = qh->dev_speed;
++	hc->max_packet = dwc_max_packet(qh->maxp);
++
++	hc->xfer_started = 0;
++	hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
++	hc->error_state = (qtd->error_count > 0);
++	hc->halt_on_queue = 0;
++	hc->halt_pending = 0;
++	hc->requests = 0;
++
++	/*
++	 * The following values may be modified in the transfer type section
++	 * below. The xfer_len value may be reduced when the transfer is
++	 * started to accommodate the max widths of the XferSize and PktCnt
++	 * fields in the HCTSIZn register.
++	 */
++
++	hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0);
++	if (hc->ep_is_in) {
++		hc->do_ping = 0;
++	} else {
++		hc->do_ping = qh->ping_state;
++	}
++
++	hc->data_pid_start = qh->data_toggle;
++	hc->multi_count = 1;
++
++	if (hcd->core_if->dma_enable) {
++		hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length;
++
++		/* For non-dword aligned case */
++		if (((unsigned long)hc->xfer_buff & 0x3)
++		    && !hcd->core_if->dma_desc_enable) {
++			ptr = (uint8_t *) urb->buf + urb->actual_length;
++		}
++	} else {
++		hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length;
++	}
++	hc->xfer_len = urb->length - urb->actual_length;
++	hc->xfer_count = 0;
++
++	/*
++	 * Set the split attributes
++	 */
++	hc->do_split = 0;
++	if (qh->do_split) {
++		uint32_t hub_addr, port_addr;
++		hc->do_split = 1;
++		hc->xact_pos = qtd->isoc_split_pos;
++		hc->complete_split = qtd->complete_split;
++		hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr);
++		hc->hub_addr = (uint8_t) hub_addr;
++		hc->port_addr = (uint8_t) port_addr;
++	}
++
++	switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) {
++	case UE_CONTROL:
++		hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction\n");
++			hc->do_ping = 0;
++			hc->ep_is_in = 0;
++			hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *) urb->setup_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *) urb->setup_packet;
++			}
++			hc->xfer_len = 8;
++			ptr = NULL;
++			break;
++		case DWC_OTG_CONTROL_DATA:
++			DWC_DEBUGPL(DBG_HCDV, "  Control data transaction\n");
++			hc->data_pid_start = qtd->data_toggle;
++			break;
++		case DWC_OTG_CONTROL_STATUS:
++			/*
++			 * Direction is opposite of data direction or IN if no
++			 * data.
++			 */
++			DWC_DEBUGPL(DBG_HCDV, "  Control status transaction\n");
++			if (urb->length == 0) {
++				hc->ep_is_in = 1;
++			} else {
++				hc->ep_is_in =
++				    dwc_otg_hcd_is_pipe_out(&urb->pipe_info);
++			}
++			if (hc->ep_is_in) {
++				hc->do_ping = 0;
++			}
++
++			hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++
++			hc->xfer_len = 0;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *) hcd->status_buf_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *) hcd->status_buf;
++			}
++			ptr = NULL;
++			break;
++		}
++		break;
++	case UE_BULK:
++		hc->ep_type = DWC_OTG_EP_TYPE_BULK;
++		break;
++	case UE_INTERRUPT:
++		hc->ep_type = DWC_OTG_EP_TYPE_INTR;
++		break;
++	case UE_ISOCHRONOUS:
++		{
++			struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++
++			hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
++
++			if (hcd->core_if->dma_desc_enable)
++				break;
++
++			frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
++
++			frame_desc->status = 0;
++
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *) urb->dma;
++			} else {
++				hc->xfer_buff = (uint8_t *) urb->buf;
++			}
++			hc->xfer_buff +=
++			    frame_desc->offset + qtd->isoc_split_offset;
++			hc->xfer_len =
++			    frame_desc->length - qtd->isoc_split_offset;
++
++			/* For non-dword aligned buffers */
++			if (((unsigned long)hc->xfer_buff & 0x3)
++			    && hcd->core_if->dma_enable) {
++				ptr =
++				    (uint8_t *) urb->buf + frame_desc->offset +
++				    qtd->isoc_split_offset;
++			} else
++				ptr = NULL;
++
++			if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++				if (hc->xfer_len <= 188) {
++					hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				} else {
++					hc->xact_pos =
++					    DWC_HCSPLIT_XACTPOS_BEGIN;
++				}
++			}
++		}
++		break;
++	}
++	/* non DWORD-aligned buffer case */	
++	if (ptr) {
++		uint32_t buf_size;
++		if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			buf_size = hcd->core_if->core_params->max_transfer_size;
++		} else {				
++			buf_size = 4096;
++		}
++		if (!qh->dw_align_buf) {
++			qh->dw_align_buf = DWC_DMA_ALLOC_ATOMIC(buf_size,
++							 &qh->dw_align_buf_dma);
++			if (!qh->dw_align_buf) {
++				DWC_ERROR
++				    ("%s: Failed to allocate memory to handle "
++				     "non-dword aligned buffer case\n",
++				     __func__);
++				return;
++			}
++		}
++		if (!hc->ep_is_in) {
++			dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len);
++		}
++		hc->align_buff = qh->dw_align_buf_dma;
++	} else {
++		hc->align_buff = 0;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		/*
++		 * This value may be modified when the transfer is started to
++		 * reflect the actual transfer length.
++		 */
++		hc->multi_count = dwc_hb_mult(qh->maxp);
++	}
++
++	if (hcd->core_if->dma_desc_enable)
++		hc->desc_list_addr = qh->desc_list_dma;
++
++	dwc_otg_hc_init(hcd->core_if, hc);
++	hc->qh = qh;
++}
++
++/**
++ * This function selects transactions from the HCD transfer schedule and
++ * assigns them to available host channels. It is called from HCD interrupt
++ * handler functions.
++ *
++ * @param hcd The HCD state structure.
++ *
++ * @return The types of new transactions that were assigned to host channels.
++ */
++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd)
++{
++	dwc_list_link_t *qh_ptr;
++	dwc_otg_qh_t *qh;
++	int num_channels;
++	dwc_irqflags_t flags;
++	dwc_spinlock_t *channel_lock = hcd->channel_lock;
++	dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "  Select Transactions\n");
++#endif
++
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_per_scheduled = 0;
++	last_sel_trans_num_nonper_scheduled = 0;
++	last_sel_trans_num_avail_hc_at_start = hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++	/* Process entries in the periodic ready list. */
++	qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready);
++
++	while (qh_ptr != &hcd->periodic_sched_ready &&
++	       !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
++		if (microframe_schedule) {
++			// Make sure we leave one channel for non periodic transactions.
++			DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++			if (hcd->available_host_channels <= 1) {
++				DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++				break;
++			}
++			hcd->available_host_channels--;
++			DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++#ifdef DEBUG_HOST_CHANNELS
++			last_sel_trans_num_per_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++		}
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the periodic ready schedule to the
++		 * periodic assigned schedule.
++		 */
++		qh_ptr = DWC_LIST_NEXT(qh_ptr);
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
++				   &qh->qh_list_entry);
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++
++		ret_val = DWC_OTG_TRANSACTION_PERIODIC;
++	}
++
++	/*
++	 * Process entries in the inactive portion of the non-periodic
++	 * schedule. Some free host channels may not be used if they are
++	 * reserved for periodic transfers.
++	 */
++	qh_ptr = hcd->non_periodic_sched_inactive.next;
++	num_channels = hcd->core_if->core_params->host_channels;
++	while (qh_ptr != &hcd->non_periodic_sched_inactive &&
++	       (microframe_schedule || hcd->non_periodic_channels <
++		num_channels - hcd->periodic_channels) &&
++	       !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
++
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		/*
++		 * Check to see if this is a NAK'd retransmit, in which case ignore for retransmission
++		 * we hold off on bulk retransmissions to reduce NAK interrupt overhead for full-speed
++		 * cheeky devices that just hold off using NAKs
++		 */
++		if (nak_holdoff_enable && qh->do_split) {
++			if (qh->nak_frame != 0xffff &&
++				dwc_full_frame_num(qh->nak_frame) ==
++				dwc_full_frame_num(dwc_otg_hcd_get_frame_number(hcd))) {
++				/*
++				 * Revisit: Need to avoid trampling on periodic scheduling.
++				 * Currently we are safe because g_np_count != g_np_sent whenever we hit this,
++				 * but if this behaviour is changed then periodic endpoints will get a slower
++				 * polling rate.
++				 */
++				g_next_sched_frame = ((qh->nak_frame + 8) & ~7) & DWC_HFNUM_MAX_FRNUM;
++				qh_ptr = DWC_LIST_NEXT(qh_ptr);
++				continue;
++			} else {
++				qh->nak_frame = 0xffff;
++			}
++		}
++		if (microframe_schedule) {
++				DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++				if (hcd->available_host_channels < 1) {
++					DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++					break;
++				}
++				hcd->available_host_channels--;
++				DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++#ifdef DEBUG_HOST_CHANNELS
++				last_sel_trans_num_nonper_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++		}
++
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the non-periodic inactive schedule to the
++		 * non-periodic active schedule.
++		 */
++		qh_ptr = DWC_LIST_NEXT(qh_ptr);
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active,
++				   &qh->qh_list_entry);
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++
++		g_np_sent++;
++
++		if (ret_val == DWC_OTG_TRANSACTION_NONE) {
++			ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
++		} else {
++			ret_val = DWC_OTG_TRANSACTION_ALL;
++		}
++
++		if (!microframe_schedule)
++			hcd->non_periodic_channels++;
++	}
++
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_avail_hc_at_end = hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++	return ret_val;
++}
++
++/**
++ * Attempts to queue a single transaction request for a host channel
++ * associated with either a periodic or non-periodic transfer. This function
++ * assumes that there is space available in the appropriate request queue. For
++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
++ * is available in the appropriate Tx FIFO.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc Host channel descriptor associated with either a periodic or
++ * non-periodic transfer.
++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
++ * transfers.
++ *
++ * @return 1 if a request is queued and more requests may be needed to
++ * complete the transfer, 0 if no more requests are required for this
++ * transfer, -1 if there is insufficient space in the Tx FIFO.
++ */
++static int queue_transaction(dwc_otg_hcd_t * hcd,
++			     dwc_hc_t * hc, uint16_t fifo_dwords_avail)
++{
++	int retval;
++
++	if (hcd->core_if->dma_enable) {
++		if (hcd->core_if->dma_desc_enable) {
++			if (!hc->xfer_started
++			    || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) {
++				dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh);
++				hc->qh->ping_state = 0;
++			}
++		} else if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			hc->qh->ping_state = 0;
++		}
++		retval = 0;
++	} else if (hc->halt_pending) {
++		/* Don't queue a request if the channel has been halted. */
++		retval = 0;
++	} else if (hc->halt_on_queue) {
++		dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
++		retval = 0;
++	} else if (hc->do_ping) {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++		}
++		retval = 0;
++	} else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		if ((fifo_dwords_avail * 4) >= hc->max_packet) {
++			if (!hc->xfer_started) {
++				dwc_otg_hc_start_transfer(hcd->core_if, hc);
++				retval = 1;
++			} else {
++				retval =
++				    dwc_otg_hc_continue_transfer(hcd->core_if,
++								 hc);
++			}
++		} else {
++			retval = -1;
++		}
++	} else {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			retval = 1;
++		} else {
++			retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Processes periodic channels for the next frame and queues transactions for
++ * these channels to the DWC_otg controller. After queueing transactions, the
++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
++ * to queue as Periodic Tx FIFO or request queue space becomes available.
++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
++ */
++static void process_periodic_channels(dwc_otg_hcd_t * hcd)
++{
++	hptxsts_data_t tx_status;
++	dwc_list_link_t *qh_ptr;
++	dwc_otg_qh_t *qh;
++	int status;
++	int no_queue_space = 0;
++	int no_fifo_space = 0;
++
++	dwc_otg_host_global_regs_t *host_regs;
++	host_regs = hcd->core_if->host_if->host_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
++	DWC_DEBUGPL(DBG_HCDV,
++		    "  P Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.ptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.ptxfspcavail);
++#endif
++
++	qh_ptr = hcd->periodic_sched_assigned.next;
++	while (qh_ptr != &hcd->periodic_sched_assigned) {
++		tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
++		if (tx_status.b.ptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		/*
++		 * Set a flag if we're queuing high-bandwidth in slave mode.
++		 * The flag prevents any halts to get into the request queue in
++		 * the middle of multiple high-bandwidth packets getting queued.
++		 */
++		if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) {
++			hcd->core_if->queuing_high_bandwidth = 1;
++		}
++		status =
++		    queue_transaction(hcd, qh->channel,
++				      tx_status.b.ptxfspcavail);
++		if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/*
++		 * In Slave mode, stay on the current transfer until there is
++		 * nothing more to do or the high-bandwidth request count is
++		 * reached. In DMA mode, only need to queue one request. The
++		 * controller automatically handles multiple packets for
++		 * high-bandwidth transfers.
++		 */
++		if (hcd->core_if->dma_enable || status == 0 ||
++		    qh->channel->requests == qh->channel->multi_count) {
++			qh_ptr = qh_ptr->next;
++			/*
++			 * Move the QH from the periodic assigned schedule to
++			 * the periodic queued schedule.
++			 */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued,
++					   &qh->qh_list_entry);
++
++			/* done queuing high bandwidth */
++			hcd->core_if->queuing_high_bandwidth = 0;
++		}
++	}
++
++	if (!hcd->core_if->dma_enable) {
++		dwc_otg_core_global_regs_t *global_regs;
++		gintmsk_data_t intr_mask = {.d32 = 0 };
++
++		global_regs = hcd->core_if->core_global_regs;
++		intr_mask.b.ptxfempty = 1;
++#ifdef DEBUG
++		tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  P Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.ptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  P Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.ptxfspcavail);
++#endif
++		if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) ||
++		    no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the periodic Tx
++			 * FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0,
++					 intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32,
++					 0);
++		}
++	}
++}
++
++/**
++ * Processes active non-periodic channels and queues transactions for these
++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
++ * FIFO Empty interrupt is enabled if there are more transactions to queue as
++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
++ * FIFO Empty interrupt is disabled.
++ */
++static void process_non_periodic_channels(dwc_otg_hcd_t * hcd)
++{
++	gnptxsts_data_t tx_status;
++	dwc_list_link_t *orig_qh_ptr;
++	dwc_otg_qh_t *qh;
++	int status;
++	int no_queue_space = 0;
++	int no_fifo_space = 0;
++	int more_to_do = 0;
++
++	dwc_otg_core_global_regs_t *global_regs =
++	    hcd->core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_HCDV,
++		    "  NP Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.nptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.nptxfspcavail);
++#endif
++	/*
++	 * Keep track of the starting point. Skip over the start-of-list
++	 * entry.
++	 */
++	if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++	}
++	orig_qh_ptr = hcd->non_periodic_qh_ptr;
++
++	/*
++	 * Process once through the active list or until no more space is
++	 * available in the request queue or the Tx FIFO.
++	 */
++	do {
++		tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++		if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t,
++				    qh_list_entry);
++		status =
++		    queue_transaction(hcd, qh->channel,
++				      tx_status.b.nptxfspcavail);
++
++		if (status > 0) {
++			more_to_do = 1;
++		} else if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/* Advance to next QH, skipping start-of-list entry. */
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++		if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++			hcd->non_periodic_qh_ptr =
++			    hcd->non_periodic_qh_ptr->next;
++		}
++
++	} while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
++
++	if (!hcd->core_if->dma_enable) {
++		gintmsk_data_t intr_mask = {.d32 = 0 };
++		intr_mask.b.nptxfempty = 1;
++
++#ifdef DEBUG
++		tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  NP Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.nptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  NP Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.nptxfspcavail);
++#endif
++		if (more_to_do || no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the non-periodic
++			 * Tx FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0,
++					 intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32,
++					 0);
++		}
++	}
++}
++
++/**
++ * This function processes the currently active host channels and queues
++ * transactions for these channels to the DWC_otg controller. It is called
++ * from HCD interrupt handler functions.
++ *
++ * @param hcd The HCD state structure.
++ * @param tr_type The type(s) of transactions to queue (non-periodic,
++ * periodic, or both).
++ */
++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
++				    dwc_otg_transaction_type_e tr_type)
++{
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
++#endif
++	/* Process host channels associated with periodic transfers. */
++	if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
++	     tr_type == DWC_OTG_TRANSACTION_ALL) &&
++	    !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) {
++
++		process_periodic_channels(hcd);
++	}
++
++	/* Process host channels associated with non-periodic transfers. */
++	if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
++	    tr_type == DWC_OTG_TRANSACTION_ALL) {
++		if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) {
++			process_non_periodic_channels(hcd);
++		} else {
++			/*
++			 * Ensure NP Tx FIFO empty interrupt is disabled when
++			 * there are no non-periodic transfers to process.
++			 */
++			gintmsk_data_t gintmsk = {.d32 = 0 };
++			gintmsk.b.nptxfempty = 1;
++			DWC_MODIFY_REG32(&hcd->core_if->
++					 core_global_regs->gintmsk, gintmsk.d32,
++					 0);
++		}
++	}
++}
++
++#ifdef DWC_HS_ELECT_TST
++/*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++static dwc_otg_core_global_regs_t *global_regs;
++static dwc_otg_host_global_regs_t *hc_global_regs;
++static dwc_otg_hc_regs_t *hc_regs;
++static uint32_t *data_fifo;
++
++static void do_setup(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++
++	/* Enable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/*
++	 * Send Setup packet (Get Device Descriptor)
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		hcchar.b.chdis = 1;
++//              hcchar.b.chen = 1;
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		dwc_mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++		/* Read HAINT */
++		haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++		/* Read HCINT */
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++		/* Read HCCHAR */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++		/* Clear HCINT */
++		DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	/* Fill FIFO with Setup data for Get Device Descriptor */
++	data_fifo = (uint32_t *) ((char *)global_regs + 0x1000);
++	DWC_WRITE_REG32(data_fifo++, 0x01000680);
++	DWC_WRITE_REG32(data_fifo++, 0x00080000);
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	/* Disable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++}
++
++static void do_in_ack(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++	host_grxsts_data_t grxsts;
++
++	/* Enable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/*
++	 * Receive Control In packet
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		dwc_mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++		/* Read HAINT */
++		haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++		/* Read HCINT */
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++		/* Read HCCHAR */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++		/* Clear HCINT */
++		DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 1;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	/* Read RXSTS */
++	grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer */
++		if (grxsts.b.bcnt > 0) {
++			int i;
++			int word_count = (grxsts.b.bcnt + 3) / 4;
++
++			data_fifo = (uint32_t *) ((char *)global_regs + 0x1000);
++
++			for (i = 0; i < word_count; i++) {
++				(void)DWC_READ_REG32(data_fifo++);
++			}
++		}
++		break;
++
++	default:
++		break;
++	}
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	/* Read RXSTS */
++	grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++		break;
++
++	default:
++		break;
++	}
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++//      usleep(100000);
++//      mdelay(100);
++	dwc_mdelay(1);
++
++	/*
++	 * Send handshake packet
++	 */
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		dwc_mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++		/* Read HAINT */
++		haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++		/* Read HCINT */
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++		/* Read HCCHAR */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++		/* Clear HCINT */
++		DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 0;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	/* Disable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++}
++#endif
++
++/** Handles hub class-specific requests. */
++int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd,
++			    uint16_t typeReq,
++			    uint16_t wValue,
++			    uint16_t wIndex, uint8_t * buf, uint16_t wLength)
++{
++	int retval = 0;
++
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	usb_hub_descriptor_t *hub_desc;
++	hprt0_data_t hprt0 = {.d32 = 0 };
++
++	uint32_t port_status;
++
++	switch (typeReq) {
++	case UCR_CLEAR_HUB_FEATURE:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "ClearHubFeature 0x%x\n", wValue);
++		switch (wValue) {
++		case UHF_C_HUB_LOCAL_POWER:
++		case UHF_C_HUB_OVER_CURRENT:
++			/* Nothing required here */
++			break;
++		default:
++			retval = -DWC_E_INVALID;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearHubFeature request %xh unknown\n",
++				  wValue);
++		}
++		break;
++	case UCR_CLEAR_PORT_FEATURE:
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		if (wValue != UHF_PORT_L1)
++#endif
++			if (!wIndex || wIndex > 1)
++				goto error;
++
++		switch (wValue) {
++		case UHF_PORT_ENABLE:
++			DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtena = 1;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case UHF_PORT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++
++			if (core_if->power_down == 2) {
++				dwc_otg_host_hibernation_restore(core_if, 0, 0);
++			} else {
++				DWC_WRITE_REG32(core_if->pcgcctl, 0);
++				dwc_mdelay(5);
++
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtres = 1;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++				hprt0.b.prtsusp = 0;
++				/* Clear Resume bit */
++				dwc_mdelay(100);
++				hprt0.b.prtres = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			}
++			break;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		case UHF_PORT_L1:
++			{
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				glpmcfg_data_t lpmcfg = {.d32 = 0 };
++
++				lpmcfg.d32 =
++				    DWC_READ_REG32(&core_if->
++						   core_global_regs->glpmcfg);
++				lpmcfg.b.en_utmi_sleep = 0;
++				lpmcfg.b.hird_thres &= (~(1 << 4));
++				lpmcfg.b.prt_sleep_sts = 1;
++				DWC_WRITE_REG32(&core_if->
++						core_global_regs->glpmcfg,
++						lpmcfg.d32);
++
++				/* Clear Enbl_L1Gating bit. */
++				pcgcctl.b.enbl_sleep_gating = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32,
++						 0);
++
++				dwc_mdelay(5);
++
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtres = 1;
++				DWC_WRITE_REG32(core_if->host_if->hprt0,
++						hprt0.d32);
++				/* This bit will be cleared in wakeup interrupt handle */
++				break;
++			}
++#endif
++		case UHF_PORT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 0;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case UHF_PORT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++			/* Port inidicator not supported */
++			break;
++		case UHF_C_PORT_CONNECTION:
++			/* Clears drivers internal connect status change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++			dwc_otg_hcd->flags.b.port_connect_status_change = 0;
++			break;
++		case UHF_C_PORT_RESET:
++			/* Clears the driver's internal Port Reset Change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++			dwc_otg_hcd->flags.b.port_reset_change = 0;
++			break;
++		case UHF_C_PORT_ENABLE:
++			/* Clears the driver's internal Port
++			 * Enable/Disable Change flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++			dwc_otg_hcd->flags.b.port_enable_change = 0;
++			break;
++		case UHF_C_PORT_SUSPEND:
++			/* Clears the driver's internal Port Suspend
++			 * Change flag, which is set when resume signaling on
++			 * the host port is complete */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++			dwc_otg_hcd->flags.b.port_suspend_change = 0;
++			break;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		case UHF_C_PORT_L1:
++			dwc_otg_hcd->flags.b.port_l1_change = 0;
++			break;
++#endif
++		case UHF_C_PORT_OVER_CURRENT:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++			dwc_otg_hcd->flags.b.port_over_current_change = 0;
++			break;
++		default:
++			retval = -DWC_E_INVALID;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++		}
++		break;
++	case UCR_GET_HUB_DESCRIPTOR:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubDescriptor\n");
++		hub_desc = (usb_hub_descriptor_t *) buf;
++		hub_desc->bDescLength = 9;
++		hub_desc->bDescriptorType = 0x29;
++		hub_desc->bNbrPorts = 1;
++		USETW(hub_desc->wHubCharacteristics, 0x08);
++		hub_desc->bPwrOn2PwrGood = 1;
++		hub_desc->bHubContrCurrent = 0;
++		hub_desc->DeviceRemovable[0] = 0;
++		hub_desc->DeviceRemovable[1] = 0xff;
++		break;
++	case UCR_GET_HUB_STATUS:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubStatus\n");
++		DWC_MEMSET(buf, 0, 4);
++		break;
++	case UCR_GET_PORT_STATUS:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetPortStatus wIndex = 0x%04x FLAGS=0x%08x\n",
++			    wIndex, dwc_otg_hcd->flags.d32);
++		if (!wIndex || wIndex > 1)
++			goto error;
++
++		port_status = 0;
++
++		if (dwc_otg_hcd->flags.b.port_connect_status_change)
++			port_status |= (1 << UHF_C_PORT_CONNECTION);
++
++		if (dwc_otg_hcd->flags.b.port_enable_change)
++			port_status |= (1 << UHF_C_PORT_ENABLE);
++
++		if (dwc_otg_hcd->flags.b.port_suspend_change)
++			port_status |= (1 << UHF_C_PORT_SUSPEND);
++
++		if (dwc_otg_hcd->flags.b.port_l1_change)
++			port_status |= (1 << UHF_C_PORT_L1);
++
++		if (dwc_otg_hcd->flags.b.port_reset_change) {
++			port_status |= (1 << UHF_C_PORT_RESET);
++		}
++
++		if (dwc_otg_hcd->flags.b.port_over_current_change) {
++			DWC_WARN("Overcurrent change detected\n");
++			port_status |= (1 << UHF_C_PORT_OVER_CURRENT);
++		}
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return 0's for the remainder of the port status
++			 * since the port register can't be read if the core
++			 * is in device mode.
++			 */
++			*((__le32 *) buf) = dwc_cpu_to_le32(&port_status);
++			break;
++		}
++
++		hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++		DWC_DEBUGPL(DBG_HCDV, "  HPRT0: 0x%08x\n", hprt0.d32);
++
++		if (hprt0.b.prtconnsts)
++			port_status |= (1 << UHF_PORT_CONNECTION);
++
++		if (hprt0.b.prtena)
++			port_status |= (1 << UHF_PORT_ENABLE);
++
++		if (hprt0.b.prtsusp)
++			port_status |= (1 << UHF_PORT_SUSPEND);
++
++		if (hprt0.b.prtovrcurract)
++			port_status |= (1 << UHF_PORT_OVER_CURRENT);
++
++		if (hprt0.b.prtrst)
++			port_status |= (1 << UHF_PORT_RESET);
++
++		if (hprt0.b.prtpwr)
++			port_status |= (1 << UHF_PORT_POWER);
++
++		if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
++			port_status |= (1 << UHF_PORT_HIGH_SPEED);
++		else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
++			port_status |= (1 << UHF_PORT_LOW_SPEED);
++
++		if (hprt0.b.prttstctl)
++			port_status |= (1 << UHF_PORT_TEST);
++		if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) {
++			port_status |= (1 << UHF_PORT_L1);
++		}
++		/*
++		   For Synopsys HW emulation of Power down wkup_control asserts the 
++		   hreset_n and prst_n on suspned. This causes the HPRT0 to be zero. 
++		   We intentionally tell the software that port is in L2Suspend state. 
++		   Only for STE.
++		*/
++		if ((core_if->power_down == 2)
++		    && (core_if->hibernation_suspend == 1)) {
++			port_status |= (1 << UHF_PORT_SUSPEND);
++		}
++		/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++
++		*((__le32 *) buf) = dwc_cpu_to_le32(&port_status);
++
++		break;
++	case UCR_SET_HUB_FEATURE:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "SetHubFeature\n");
++		/* No HUB features supported */
++		break;
++	case UCR_SET_PORT_FEATURE:
++		if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1))
++			goto error;
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return without doing anything since the port
++			 * register can't be written if the core is in device
++			 * mode.
++			 */
++			break;
++		}
++
++		switch (wValue) {
++		case UHF_PORT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++			if (dwc_otg_hcd_otg_port(dwc_otg_hcd) != wIndex) {
++				goto error;
++			}
++			if (core_if->power_down == 2) {
++				int timeout = 300;
++				dwc_irqflags_t flags;
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				gpwrdn_data_t gpwrdn = {.d32 = 0 };
++				gusbcfg_data_t gusbcfg = {.d32 = 0 };
++#ifdef DWC_DEV_SRPCAP
++				int32_t otg_cap_param = core_if->core_params->otg_cap;
++#endif
++				DWC_PRINTF("Preparing for complete power-off\n");
++
++				/* Save registers before hibernation */
++				dwc_otg_save_global_regs(core_if);
++				dwc_otg_save_host_regs(core_if);
++
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtsusp = 1;
++				hprt0.b.prtena = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++				/* Spin hprt0.b.prtsusp to became 1 */
++				do {
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					if (hprt0.b.prtsusp) {
++						break;
++					}
++					dwc_mdelay(1);
++				} while (--timeout);
++				if (!timeout) {
++					DWC_WARN("Suspend wasn't genereted\n");
++				}
++				dwc_udelay(10);
++
++				/*
++				 * We need to disable interrupts to prevent servicing of any IRQ
++				 * during going to hibernation
++				 */
++				DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++				core_if->lx_state = DWC_OTG_L2;
++#ifdef DWC_DEV_SRPCAP
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtpwr = 0;
++				hprt0.b.prtena = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0,
++						hprt0.d32);
++#endif
++				gusbcfg.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->
++						   gusbcfg);
++				if (gusbcfg.b.ulpi_utmi_sel == 1) {
++					/* ULPI interface */
++					/* Suspend the Phy Clock */
++					pcgcctl.d32 = 0;
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++							 pcgcctl.d32);
++					dwc_udelay(10);
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++				} else {
++					/* UTMI+ Interface */
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++					dwc_udelay(10);
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++					dwc_udelay(10);
++				}
++#ifdef DWC_DEV_SRPCAP				
++				gpwrdn.d32 = 0;
++				gpwrdn.b.dis_vbus = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++#endif
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				gpwrdn.d32 = 0;
++#ifdef DWC_DEV_SRPCAP
++				gpwrdn.b.srp_det_msk = 1;
++#endif
++				gpwrdn.b.disconn_det_msk = 1;
++				gpwrdn.b.lnstchng_msk = 1;
++				gpwrdn.b.sts_chngint_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Enable Power Down Clamp and all interrupts in GPWRDN */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnclmp = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Switch off VDD */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++#ifdef DWC_DEV_SRPCAP
++				if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE)
++				{
++					core_if->pwron_timer_started = 1;
++					DWC_TIMER_SCHEDULE(core_if->pwron_timer, 6000 /* 6 secs */ );
++				}
++#endif
++				/* Save gpwrdn register for further usage if stschng interrupt */
++				core_if->gr_backup->gpwrdn_local =
++						DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++				/* Set flag to indicate that we are in hibernation */
++				core_if->hibernation_suspend = 1;
++				DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock,flags);
++
++				DWC_PRINTF("Host hibernation completed\n");
++				// Exit from case statement
++				break;
++
++			}
++			if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex &&
++			    dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) {
++				gotgctl_data_t gotgctl = {.d32 = 0 };
++				gotgctl.b.hstsethnpen = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gotgctl, 0, gotgctl.d32);
++				core_if->op_state = A_SUSPEND;
++			}
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtsusp = 1;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			{
++				dwc_irqflags_t flags;
++				/* Update lx_state */
++				DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++				core_if->lx_state = DWC_OTG_L2;
++				DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++			}
++			/* Suspend the Phy Clock */
++			{
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				pcgcctl.b.stoppclk = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++						 pcgcctl.d32);
++				dwc_udelay(10);
++			}
++
++			/* For HNP the bus must be suspended for at least 200ms. */
++			if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) {
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				pcgcctl.b.stoppclk = 1;
++                DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++				dwc_mdelay(200);
++			}
++
++			/** @todo - check how sw can wait for 1 sec to check asesvld??? */
++#if 0 //vahrama !!!!!!!!!!!!!!!!!!
++			if (core_if->adp_enable) {
++				gotgctl_data_t gotgctl = {.d32 = 0 };
++				gpwrdn_data_t gpwrdn;
++
++				while (gotgctl.b.asesvld == 1) {
++					gotgctl.d32 =
++					    DWC_READ_REG32(&core_if->
++							   core_global_regs->
++							   gotgctl);
++					dwc_mdelay(100);
++				}
++
++				/* Enable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				/* Unmask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				dwc_otg_adp_probe_start(core_if);
++			}
++#endif
++			break;
++		case UHF_PORT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 1;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case UHF_PORT_RESET:
++			if ((core_if->power_down == 2)
++			    && (core_if->hibernation_suspend == 1)) {
++				/* If we are going to exit from Hibernated
++				 * state via USB RESET.
++				 */
++				dwc_otg_host_hibernation_restore(core_if, 0, 1);
++			} else {
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++
++				DWC_DEBUGPL(DBG_HCD,
++					    "DWC OTG HCD HUB CONTROL - "
++					    "SetPortFeature - USB_PORT_FEAT_RESET\n");
++				{
++					pcgcctl_data_t pcgcctl = {.d32 = 0 };
++					pcgcctl.b.enbl_sleep_gating = 1;
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++					DWC_WRITE_REG32(core_if->pcgcctl, 0);
++				}
++#ifdef CONFIG_USB_DWC_OTG_LPM
++				{
++					glpmcfg_data_t lpmcfg;
++					lpmcfg.d32 =
++						DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++					if (lpmcfg.b.prt_sleep_sts) {
++						lpmcfg.b.en_utmi_sleep = 0;
++						lpmcfg.b.hird_thres &= (~(1 << 4));
++						DWC_WRITE_REG32
++						    (&core_if->core_global_regs->glpmcfg,
++						     lpmcfg.d32);
++						dwc_mdelay(1);
++					}
++				}
++#endif
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				/* Clear suspend bit if resetting from suspended state. */
++				hprt0.b.prtsusp = 0;
++				/* When B-Host the Port reset bit is set in
++				 * the Start HCD Callback function, so that
++				 * the reset is started within 1ms of the HNP
++				 * success interrupt. */
++				if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) {
++					hprt0.b.prtpwr = 1;
++					hprt0.b.prtrst = 1;
++					DWC_PRINTF("Indeed it is in host mode hprt0 = %08x\n",hprt0.d32);
++					DWC_WRITE_REG32(core_if->host_if->hprt0,
++							hprt0.d32);
++				}
++				/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++				dwc_mdelay(60);
++				hprt0.b.prtrst = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++				core_if->lx_state = DWC_OTG_L0;	/* Now back to the on state */
++			}
++			break;
++#ifdef DWC_HS_ELECT_TST
++		case UHF_PORT_TEST:
++			{
++				uint32_t t;
++				gintmsk_data_t gintmsk;
++
++				t = (wIndex >> 8);	/* MSB wIndex USB */
++				DWC_DEBUGPL(DBG_HCD,
++					    "DWC OTG HCD HUB CONTROL - "
++					    "SetPortFeature - USB_PORT_FEAT_TEST %d\n",
++					    t);
++				DWC_WARN("USB_PORT_FEAT_TEST %d\n", t);
++				if (t < 6) {
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					hprt0.b.prttstctl = t;
++					DWC_WRITE_REG32(core_if->host_if->hprt0,
++							hprt0.d32);
++				} else {
++					/* Setup global vars with reg addresses (quick and
++					 * dirty hack, should be cleaned up)
++					 */
++					global_regs = core_if->core_global_regs;
++					hc_global_regs =
++					    core_if->host_if->host_global_regs;
++					hc_regs =
++					    (dwc_otg_hc_regs_t *) ((char *)
++								   global_regs +
++								   0x500);
++					data_fifo =
++					    (uint32_t *) ((char *)global_regs +
++							  0x1000);
++
++					if (t == 6) {	/* HS_HOST_PORT_SUSPEND_RESUME */
++						/* Save current interrupt mask */
++						gintmsk.d32 =
++						    DWC_READ_REG32
++						    (&global_regs->gintmsk);
++
++						/* Disable all interrupts while we muck with
++						 * the hardware directly
++						 */
++						DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++						/* 15 second delay per the test spec */
++						dwc_mdelay(15000);
++
++						/* Drive suspend on the root port */
++						hprt0.d32 =
++						    dwc_otg_read_hprt0(core_if);
++						hprt0.b.prtsusp = 1;
++						hprt0.b.prtres = 0;
++						DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++						/* 15 second delay per the test spec */
++						dwc_mdelay(15000);
++
++						/* Drive resume on the root port */
++						hprt0.d32 =
++						    dwc_otg_read_hprt0(core_if);
++						hprt0.b.prtsusp = 0;
++						hprt0.b.prtres = 1;
++						DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++						dwc_mdelay(100);
++
++						/* Clear the resume bit */
++						hprt0.b.prtres = 0;
++						DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++						/* Restore interrupts */
++						DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
++					} else if (t == 7) {	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++						/* Save current interrupt mask */
++						gintmsk.d32 =
++						    DWC_READ_REG32
++						    (&global_regs->gintmsk);
++
++						/* Disable all interrupts while we muck with
++						 * the hardware directly
++						 */
++						DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++						/* 15 second delay per the test spec */
++						dwc_mdelay(15000);
++
++						/* Send the Setup packet */
++						do_setup();
++
++						/* 15 second delay so nothing else happens for awhile */
++						dwc_mdelay(15000);
++
++						/* Restore interrupts */
++						DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
++					} else if (t == 8) {	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++						/* Save current interrupt mask */
++						gintmsk.d32 =
++						    DWC_READ_REG32
++						    (&global_regs->gintmsk);
++
++						/* Disable all interrupts while we muck with
++						 * the hardware directly
++						 */
++						DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++						/* Send the Setup packet */
++						do_setup();
++
++						/* 15 second delay so nothing else happens for awhile */
++						dwc_mdelay(15000);
++
++						/* Send the In and Ack packets */
++						do_in_ack();
++
++						/* 15 second delay so nothing else happens for awhile */
++						dwc_mdelay(15000);
++
++						/* Restore interrupts */
++						DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
++					}
++				}
++				break;
++			}
++#endif /* DWC_HS_ELECT_TST */
++
++		case UHF_PORT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++			/* Not supported */
++			break;
++		default:
++			retval = -DWC_E_INVALID;
++			DWC_ERROR("DWC OTG HCD - "
++				  "SetPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++			break;
++		}
++		break;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	case UCR_SET_AND_TEST_PORT_FEATURE:
++		if (wValue != UHF_PORT_L1) {
++			goto error;
++		}
++		{
++			int portnum, hird, devaddr, remwake;
++			glpmcfg_data_t lpmcfg;
++			uint32_t time_usecs;
++			gintsts_data_t gintsts;
++			gintmsk_data_t gintmsk;
++
++			if (!dwc_otg_get_param_lpm_enable(core_if)) {
++				goto error;
++			}
++			if (wValue != UHF_PORT_L1 || wLength != 1) {
++				goto error;
++			}
++			/* Check if the port currently is in SLEEP state */
++			lpmcfg.d32 =
++			    DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++			if (lpmcfg.b.prt_sleep_sts) {
++				DWC_INFO("Port is already in sleep mode\n");
++				buf[0] = 0;	/* Return success */
++				break;
++			}
++
++			portnum = wIndex & 0xf;
++			hird = (wIndex >> 4) & 0xf;
++			devaddr = (wIndex >> 8) & 0x7f;
++			remwake = (wIndex >> 15);
++
++			if (portnum != 1) {
++				retval = -DWC_E_INVALID;
++				DWC_WARN
++				    ("Wrong port number(%d) in SetandTestPortFeature request\n",
++				     portnum);
++				break;
++			}
++
++			DWC_PRINTF
++			    ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n",
++			     portnum, hird, devaddr, remwake);
++			/* Disable LPM interrupt */
++			gintmsk.d32 = 0;
++			gintmsk.b.lpmtranrcvd = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++					 gintmsk.d32, 0);
++
++			if (dwc_otg_hcd_send_lpm
++			    (dwc_otg_hcd, devaddr, hird, remwake)) {
++				retval = -DWC_E_INVALID;
++				break;
++			}
++
++			time_usecs = 10 * (lpmcfg.b.retry_count + 1);
++			/* We will consider timeout if time_usecs microseconds pass,
++			 * and we don't receive LPM transaction status.
++			 * After receiving non-error responce(ACK/NYET/STALL) from device,
++			 *  core will set lpmtranrcvd bit.
++			 */
++			do {
++				gintsts.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++				if (gintsts.b.lpmtranrcvd) {
++					break;
++				}
++				dwc_udelay(1);
++			} while (--time_usecs);
++			/* lpm_int bit will be cleared in LPM interrupt handler */
++
++			/* Now fill status
++			 * 0x00 - Success
++			 * 0x10 - NYET
++			 * 0x11 - Timeout
++			 */
++			if (!gintsts.b.lpmtranrcvd) {
++				buf[0] = 0x3;	/* Completion code is Timeout */
++				dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd);
++			} else {
++				lpmcfg.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++				if (lpmcfg.b.lpm_resp == 0x3) {
++					/* ACK responce from the device */
++					buf[0] = 0x00;	/* Success */
++				} else if (lpmcfg.b.lpm_resp == 0x2) {
++					/* NYET responce from the device */
++					buf[0] = 0x2;
++				} else {
++					/* Otherwise responce with Timeout */
++					buf[0] = 0x3;
++				}
++			}
++			DWC_PRINTF("Device responce to LPM trans is %x\n",
++				   lpmcfg.b.lpm_resp);
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0,
++					 gintmsk.d32);
++
++			break;
++		}
++#endif /* CONFIG_USB_DWC_OTG_LPM */
++	default:
++error:
++		retval = -DWC_E_INVALID;
++		DWC_WARN("DWC OTG HCD - "
++			 "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
++			 typeReq, wIndex, wValue);
++		break;
++	}
++
++	return retval;
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/** Returns index of host channel to perform LPM transaction. */
++int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr)
++{
++	dwc_otg_core_if_t *core_if = hcd->core_if;
++	dwc_hc_t *hc;
++	hcchar_data_t hcchar;
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++	if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
++		DWC_PRINTF("No free channel to select for LPM transaction\n");
++		return -1;
++	}
++
++	hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list);
++
++	/* Mask host channel interrupts. */
++	gintmsk.b.hcintr = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	/* Fill fields that core needs for LPM transaction */
++	hcchar.b.devaddr = devaddr;
++	hcchar.b.epnum = 0;
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.mps = 64;
++	hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.epdir = 0;	/* OUT */
++	DWC_WRITE_REG32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar,
++			hcchar.d32);
++
++	/* Remove the host channel from the free list. */
++	DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry);
++
++	DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr);
++
++	return hc->hc_num;
++}
++
++/** Release hc after performing LPM transaction */
++void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd)
++{
++	dwc_hc_t *hc;
++	glpmcfg_data_t lpmcfg;
++	uint8_t hc_num;
++
++	lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg);
++	hc_num = lpmcfg.b.lpm_chan_index;
++
++	hc = hcd->hc_ptr_array[hc_num];
++
++	DWC_PRINTF("Freeing channel %d after LPM\n", hc_num);
++	/* Return host channel to free list */
++	DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
++}
++
++int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird,
++			 uint8_t bRemoteWake)
++{
++	glpmcfg_data_t lpmcfg;
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	int channel;
++
++	channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr);
++	if (channel < 0) {
++		return channel;
++	}
++
++	pcgcctl.b.enbl_sleep_gating = 1;
++	DWC_MODIFY_REG32(hcd->core_if->pcgcctl, 0, pcgcctl.d32);
++
++	/* Read LPM config register */
++	lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg);
++
++	/* Program LPM transaction fields */
++	lpmcfg.b.rem_wkup_en = bRemoteWake;
++	lpmcfg.b.hird = hird;
++	lpmcfg.b.hird_thres = 0x1c;
++	lpmcfg.b.lpm_chan_index = channel;
++	lpmcfg.b.en_utmi_sleep = 1;
++	/* Program LPM config register */
++	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++
++	/* Send LPM transaction */
++	lpmcfg.b.send_lpm = 1;
++	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++
++	return 0;
++}
++
++#endif /* CONFIG_USB_DWC_OTG_LPM */
++
++int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port)
++{
++	int retval;
++
++	if (port != 1) {
++		return -DWC_E_INVALID;
++	}
++
++	retval = (hcd->flags.b.port_connect_status_change ||
++		  hcd->flags.b.port_reset_change ||
++		  hcd->flags.b.port_enable_change ||
++		  hcd->flags.b.port_suspend_change ||
++		  hcd->flags.b.port_over_current_change);
++#ifdef DEBUG
++	if (retval) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
++			    " Root port status changed\n");
++		DWC_DEBUGPL(DBG_HCDV, "  port_connect_status_change: %d\n",
++			    hcd->flags.b.port_connect_status_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_reset_change: %d\n",
++			    hcd->flags.b.port_reset_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_enable_change: %d\n",
++			    hcd->flags.b.port_enable_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_suspend_change: %d\n",
++			    hcd->flags.b.port_suspend_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_over_current_change: %d\n",
++			    hcd->flags.b.port_over_current_change);
++	}
++#endif
++	return retval;
++}
++
++int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	hfnum_data_t hfnum;
++	hfnum.d32 =
++	    DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->
++			   hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n",
++		    hfnum.b.frnum);
++#endif
++	return hfnum.b.frnum;
++}
++
++int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd,
++		      struct dwc_otg_hcd_function_ops *fops)
++{
++	int retval = 0;
++
++	hcd->fops = fops;
++	if (!dwc_otg_is_device_mode(hcd->core_if) && 
++		(!hcd->core_if->adp_enable || hcd->core_if->adp.adp_started)) {
++		dwc_otg_hcd_reinit(hcd);
++	} else {
++		retval = -DWC_E_NO_DEVICE;
++	}
++
++	return retval;
++}
++
++void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd)
++{
++	return hcd->priv;
++}
++
++void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data)
++{
++	hcd->priv = priv_data;
++}
++
++uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd)
++{
++	return hcd->otg_port;
++}
++
++uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd)
++{
++	uint32_t is_b_host;
++	if (hcd->core_if->op_state == B_HOST) {
++		is_b_host = 1;
++	} else {
++		is_b_host = 0;
++	}
++
++	return is_b_host;
++}
++
++dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd,
++					 int iso_desc_count, int atomic_alloc)
++{
++	dwc_otg_hcd_urb_t *dwc_otg_urb;
++	uint32_t size;
++
++	size =
++	    sizeof(*dwc_otg_urb) +
++	    iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc);
++	if (atomic_alloc)
++		dwc_otg_urb = DWC_ALLOC_ATOMIC(size);
++	else
++		dwc_otg_urb = DWC_ALLOC(size);
++
++        if (dwc_otg_urb)
++		dwc_otg_urb->packet_count = iso_desc_count;
++        else {
++		DWC_ERROR("**** DWC OTG HCD URB alloc - "
++			"%salloc of %db failed\n",
++			atomic_alloc?"atomic ":"", size);
++	}
++	return dwc_otg_urb;
++}
++
++void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb,
++				  uint8_t dev_addr, uint8_t ep_num,
++				  uint8_t ep_type, uint8_t ep_dir, uint16_t mps)
++{
++	dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num,
++			      ep_type, ep_dir, mps);
++#if 0
++	DWC_PRINTF
++	    ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n",
++	     dev_addr, ep_num, ep_dir, ep_type, mps);
++#endif
++}
++
++void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
++				void *urb_handle, void *buf, dwc_dma_t dma,
++				uint32_t buflen, void *setup_packet,
++				dwc_dma_t setup_dma, uint32_t flags,
++				uint16_t interval)
++{
++	dwc_otg_urb->priv = urb_handle;
++	dwc_otg_urb->buf = buf;
++	dwc_otg_urb->dma = dma;
++	dwc_otg_urb->length = buflen;
++	dwc_otg_urb->setup_packet = setup_packet;
++	dwc_otg_urb->setup_dma = setup_dma;
++	dwc_otg_urb->flags = flags;
++	dwc_otg_urb->interval = interval;
++	dwc_otg_urb->status = -DWC_E_IN_PROGRESS;
++}
++
++uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	return dwc_otg_urb->status;
++}
++
++uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	return dwc_otg_urb->actual_length;
++}
++
++uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	return dwc_otg_urb->error_count;
++}
++
++void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
++					 int desc_num, uint32_t offset,
++					 uint32_t length)
++{
++	dwc_otg_urb->iso_descs[desc_num].offset = offset;
++	dwc_otg_urb->iso_descs[desc_num].length = length;
++}
++
++uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb,
++					     int desc_num)
++{
++	return dwc_otg_urb->iso_descs[desc_num].status;
++}
++
++uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t *
++						    dwc_otg_urb, int desc_num)
++{
++	return dwc_otg_urb->iso_descs[desc_num].actual_length;
++}
++
++int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	int allocated = 0;
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++
++	if (qh) {
++		if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++			allocated = 1;
++		}
++	}
++	return allocated;
++}
++
++int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	int freed = 0;
++	DWC_ASSERT(qh, "qh is not allocated\n");
++
++	if (DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++		freed = 1;
++	}
++
++	return freed;
++}
++
++uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	DWC_ASSERT(qh, "qh is not allocated\n");
++	return qh->usecs;
++}
++
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd)
++{
++#ifdef DEBUG
++	int num_channels;
++	int i;
++	gnptxsts_data_t np_tx_status;
++	hptxsts_data_t p_tx_status;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	DWC_PRINTF("\n");
++	DWC_PRINTF
++	    ("************************************************************\n");
++	DWC_PRINTF("HCD State:\n");
++	DWC_PRINTF("  Num channels: %d\n", num_channels);
++	for (i = 0; i < num_channels; i++) {
++		dwc_hc_t *hc = hcd->hc_ptr_array[i];
++		DWC_PRINTF("  Channel %d:\n", i);
++		DWC_PRINTF("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			   hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINTF("    speed: %d\n", hc->speed);
++		DWC_PRINTF("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINTF("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINTF("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINTF("    multi_count: %d\n", hc->multi_count);
++		DWC_PRINTF("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINTF("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINTF("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINTF("    xfer_count: %d\n", hc->xfer_count);
++		DWC_PRINTF("    halt_on_queue: %d\n", hc->halt_on_queue);
++		DWC_PRINTF("    halt_pending: %d\n", hc->halt_pending);
++		DWC_PRINTF("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINTF("    do_split: %d\n", hc->do_split);
++		DWC_PRINTF("    complete_split: %d\n", hc->complete_split);
++		DWC_PRINTF("    hub_addr: %d\n", hc->hub_addr);
++		DWC_PRINTF("    port_addr: %d\n", hc->port_addr);
++		DWC_PRINTF("    xact_pos: %d\n", hc->xact_pos);
++		DWC_PRINTF("    requests: %d\n", hc->requests);
++		DWC_PRINTF("    qh: %p\n", hc->qh);
++		if (hc->xfer_started) {
++			hfnum_data_t hfnum;
++			hcchar_data_t hcchar;
++			hctsiz_data_t hctsiz;
++			hcint_data_t hcint;
++			hcintmsk_data_t hcintmsk;
++			hfnum.d32 =
++			    DWC_READ_REG32(&hcd->core_if->
++					   host_if->host_global_regs->hfnum);
++			hcchar.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hcchar);
++			hctsiz.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hctsiz);
++			hcint.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hcint);
++			hcintmsk.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hcintmsk);
++			DWC_PRINTF("    hfnum: 0x%08x\n", hfnum.d32);
++			DWC_PRINTF("    hcchar: 0x%08x\n", hcchar.d32);
++			DWC_PRINTF("    hctsiz: 0x%08x\n", hctsiz.d32);
++			DWC_PRINTF("    hcint: 0x%08x\n", hcint.d32);
++			DWC_PRINTF("    hcintmsk: 0x%08x\n", hcintmsk.d32);
++		}
++		if (hc->xfer_started && hc->qh) {
++			dwc_otg_qtd_t *qtd;
++			dwc_otg_hcd_urb_t *urb;
++			
++			DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) {
++				if (!qtd->in_process)
++					break;
++				
++				urb = qtd->urb;
++			DWC_PRINTF("    URB Info:\n");
++			DWC_PRINTF("      qtd: %p, urb: %p\n", qtd, urb);
++			if (urb) {
++				DWC_PRINTF("      Dev: %d, EP: %d %s\n",
++					   dwc_otg_hcd_get_dev_addr(&urb->
++								    pipe_info),
++					   dwc_otg_hcd_get_ep_num(&urb->
++								  pipe_info),
++					   dwc_otg_hcd_is_pipe_in(&urb->
++								  pipe_info) ?
++					   "IN" : "OUT");
++				DWC_PRINTF("      Max packet size: %d\n",
++					   dwc_otg_hcd_get_mps(&urb->
++							       pipe_info));
++				DWC_PRINTF("      transfer_buffer: %p\n",
++					   urb->buf);
++				DWC_PRINTF("      transfer_dma: %p\n",
++					   (void *)urb->dma);
++				DWC_PRINTF("      transfer_buffer_length: %d\n",
++					   urb->length);
++					DWC_PRINTF("      actual_length: %d\n",
++						   urb->actual_length);
++				}
++			}
++		}
++	}
++	DWC_PRINTF("  non_periodic_channels: %d\n", hcd->non_periodic_channels);
++	DWC_PRINTF("  periodic_channels: %d\n", hcd->periodic_channels);
++	DWC_PRINTF("  periodic_usecs: %d\n", hcd->periodic_usecs);
++	np_tx_status.d32 =
++	    DWC_READ_REG32(&hcd->core_if->core_global_regs->gnptxsts);
++	DWC_PRINTF("  NP Tx Req Queue Space Avail: %d\n",
++		   np_tx_status.b.nptxqspcavail);
++	DWC_PRINTF("  NP Tx FIFO Space Avail: %d\n",
++		   np_tx_status.b.nptxfspcavail);
++	p_tx_status.d32 =
++	    DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hptxsts);
++	DWC_PRINTF("  P Tx Req Queue Space Avail: %d\n",
++		   p_tx_status.b.ptxqspcavail);
++	DWC_PRINTF("  P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
++	dwc_otg_hcd_dump_frrem(hcd);
++	dwc_otg_dump_global_registers(hcd->core_if);
++	dwc_otg_dump_host_registers(hcd->core_if);
++	DWC_PRINTF
++	    ("************************************************************\n");
++	DWC_PRINTF("\n");
++#endif
++}
++
++#ifdef DEBUG
++void dwc_print_setup_data(uint8_t * setup)
++{
++	int i;
++	if (CHK_DEBUG_LEVEL(DBG_HCD)) {
++		DWC_PRINTF("Setup Data = MSB ");
++		for (i = 7; i >= 0; i--)
++			DWC_PRINTF("%02x ", setup[i]);
++		DWC_PRINTF("\n");
++		DWC_PRINTF("  bmRequestType Tranfer = %s\n",
++			   (setup[0] & 0x80) ? "Device-to-Host" :
++			   "Host-to-Device");
++		DWC_PRINTF("  bmRequestType Type = ");
++		switch ((setup[0] & 0x60) >> 5) {
++		case 0:
++			DWC_PRINTF("Standard\n");
++			break;
++		case 1:
++			DWC_PRINTF("Class\n");
++			break;
++		case 2:
++			DWC_PRINTF("Vendor\n");
++			break;
++		case 3:
++			DWC_PRINTF("Reserved\n");
++			break;
++		}
++		DWC_PRINTF("  bmRequestType Recipient = ");
++		switch (setup[0] & 0x1f) {
++		case 0:
++			DWC_PRINTF("Device\n");
++			break;
++		case 1:
++			DWC_PRINTF("Interface\n");
++			break;
++		case 2:
++			DWC_PRINTF("Endpoint\n");
++			break;
++		case 3:
++			DWC_PRINTF("Other\n");
++			break;
++		default:
++			DWC_PRINTF("Reserved\n");
++			break;
++		}
++		DWC_PRINTF("  bRequest = 0x%0x\n", setup[1]);
++		DWC_PRINTF("  wValue = 0x%0x\n", *((uint16_t *) & setup[2]));
++		DWC_PRINTF("  wIndex = 0x%0x\n", *((uint16_t *) & setup[4]));
++		DWC_PRINTF("  wLength = 0x%0x\n\n", *((uint16_t *) & setup[6]));
++	}
++}
++#endif
++
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd)
++{
++#if 0
++	DWC_PRINTF("Frame remaining at SOF:\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->frrem_samples, hcd->frrem_accum,
++		   (hcd->frrem_samples > 0) ?
++		   hcd->frrem_accum / hcd->frrem_samples : 0);
++
++	DWC_PRINTF("\n");
++	DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->core_if->hfnum_7_samples,
++		   hcd->core_if->hfnum_7_frrem_accum,
++		   (hcd->core_if->hfnum_7_samples >
++		    0) ? hcd->core_if->hfnum_7_frrem_accum /
++		   hcd->core_if->hfnum_7_samples : 0);
++	DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->core_if->hfnum_0_samples,
++		   hcd->core_if->hfnum_0_frrem_accum,
++		   (hcd->core_if->hfnum_0_samples >
++		    0) ? hcd->core_if->hfnum_0_frrem_accum /
++		   hcd->core_if->hfnum_0_samples : 0);
++	DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->core_if->hfnum_other_samples,
++		   hcd->core_if->hfnum_other_frrem_accum,
++		   (hcd->core_if->hfnum_other_samples >
++		    0) ? hcd->core_if->hfnum_other_frrem_accum /
++		   hcd->core_if->hfnum_other_samples : 0);
++
++	DWC_PRINTF("\n");
++	DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a,
++		   (hcd->hfnum_7_samples_a > 0) ?
++		   hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0);
++	DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a,
++		   (hcd->hfnum_0_samples_a > 0) ?
++		   hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0);
++	DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a,
++		   (hcd->hfnum_other_samples_a > 0) ?
++		   hcd->hfnum_other_frrem_accum_a /
++		   hcd->hfnum_other_samples_a : 0);
++
++	DWC_PRINTF("\n");
++	DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b,
++		   (hcd->hfnum_7_samples_b > 0) ?
++		   hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0);
++	DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b,
++		   (hcd->hfnum_0_samples_b > 0) ?
++		   hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0);
++	DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b,
++		   (hcd->hfnum_other_samples_b > 0) ?
++		   hcd->hfnum_other_frrem_accum_b /
++		   hcd->hfnum_other_samples_b : 0);
++#endif
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1132 @@
++/*==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $
++ * $Revision: #10 $
++ * $Date: 2011/10/20 $
++ * $Change: 1869464 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/** @file
++ * This file contains Descriptor DMA support implementation for host mode.
++ */
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++extern bool microframe_schedule;
++
++static inline uint8_t frame_list_idx(uint16_t frame)
++{
++	return (frame & (MAX_FRLIST_EN_NUM - 1));
++}
++
++static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed)
++{
++	return (idx + inc) &
++	    (((speed ==
++	       DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC :
++	      MAX_DMA_DESC_NUM_GENERIC) - 1);
++}
++
++static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed)
++{
++	return (idx - inc) &
++	    (((speed ==
++	       DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC :
++	      MAX_DMA_DESC_NUM_GENERIC) - 1);
++}
++
++static inline uint16_t max_desc_num(dwc_otg_qh_t * qh)
++{
++	return (((qh->ep_type == UE_ISOCHRONOUS)
++		 && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH))
++		? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC);
++}
++static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh)
++{
++	return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)
++		? ((qh->interval + 8 - 1) / 8)
++		: qh->interval);
++}
++
++static int desc_list_alloc(dwc_otg_qh_t * qh)
++{
++	int retval = 0;
++
++	qh->desc_list = (dwc_otg_host_dma_desc_t *)
++	    DWC_DMA_ALLOC(sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh),
++			  &qh->desc_list_dma);
++
++	if (!qh->desc_list) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__);
++		
++	}
++
++	dwc_memset(qh->desc_list, 0x00,
++		   sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh));
++
++	qh->n_bytes =
++	    (uint32_t *) DWC_ALLOC(sizeof(uint32_t) * max_desc_num(qh));
++
++	if (!qh->n_bytes) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR
++		    ("%s: Failed to allocate array for descriptors' size actual values\n",
++		     __func__);
++
++	}
++	return retval;
++
++}
++
++static void desc_list_free(dwc_otg_qh_t * qh)
++{
++	if (qh->desc_list) {
++		DWC_DMA_FREE(max_desc_num(qh), qh->desc_list,
++			     qh->desc_list_dma);
++		qh->desc_list = NULL;
++	}
++
++	if (qh->n_bytes) {
++		DWC_FREE(qh->n_bytes);
++		qh->n_bytes = NULL;
++	}
++}
++
++static int frame_list_alloc(dwc_otg_hcd_t * hcd)
++{
++	int retval = 0;
++	if (hcd->frame_list)
++		return 0;
++
++	hcd->frame_list = DWC_DMA_ALLOC(4 * MAX_FRLIST_EN_NUM,
++					&hcd->frame_list_dma);
++	if (!hcd->frame_list) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR("%s: Frame List allocation failed\n", __func__);
++	}
++
++	dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM);
++
++	return retval;
++}
++
++static void frame_list_free(dwc_otg_hcd_t * hcd)
++{
++	if (!hcd->frame_list)
++		return;
++	
++	DWC_DMA_FREE(4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma);
++	hcd->frame_list = NULL;
++}
++
++static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en)
++{
++
++	hcfg_data_t hcfg;
++
++	hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg);
++
++	if (hcfg.b.perschedena) {
++		/* already enabled */
++		return;
++	}
++
++	DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hflbaddr,
++			hcd->frame_list_dma);
++
++	switch (fr_list_en) {
++	case 64:
++		hcfg.b.frlisten = 3;
++		break;
++	case 32:
++		hcfg.b.frlisten = 2;
++		break;
++	case 16:
++		hcfg.b.frlisten = 1;
++		break;
++	case 8:
++		hcfg.b.frlisten = 0;
++		break;
++	default:
++		break;
++	}
++
++	hcfg.b.perschedena = 1;
++
++	DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n");
++	DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++
++}
++
++static void per_sched_disable(dwc_otg_hcd_t * hcd)
++{
++	hcfg_data_t hcfg;
++
++	hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg);
++	
++	if (!hcfg.b.perschedena) {
++		/* already disabled */
++		return;
++	}
++	hcfg.b.perschedena = 0;
++
++	DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n");
++	DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/* 
++ * Activates/Deactivates FrameList entries for the channel 
++ * based on endpoint servicing period.
++ */
++void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable)
++{
++	uint16_t i, j, inc;
++	dwc_hc_t *hc = NULL;
++
++	if (!qh->channel) {
++		DWC_ERROR("qh->channel = %p", qh->channel);
++		return;
++	}
++
++	if (!hcd) {
++		DWC_ERROR("------hcd = %p", hcd);
++		return;
++	}
++
++	if (!hcd->frame_list) {
++		DWC_ERROR("-------hcd->frame_list = %p", hcd->frame_list);
++		return;
++	}
++
++	hc = qh->channel;
++	inc = frame_incr_val(qh);
++	if (qh->ep_type == UE_ISOCHRONOUS)
++		i = frame_list_idx(qh->sched_frame);
++	else
++		i = 0;
++
++	j = i;
++	do {
++		if (enable)
++			hcd->frame_list[j] |= (1 << hc->hc_num);
++		else
++			hcd->frame_list[j] &= ~(1 << hc->hc_num);
++		j = (j + inc) & (MAX_FRLIST_EN_NUM - 1);
++	}
++	while (j != i);
++	if (!enable)
++		return;
++	hc->schinfo = 0;
++	if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) {
++		j = 1;
++		/* TODO - check this */
++		inc = (8 + qh->interval - 1) / qh->interval;
++		for (i = 0; i < inc; i++) {
++			hc->schinfo |= j;
++			j = j << qh->interval;
++		}
++	} else {
++		hc->schinfo = 0xff;
++	}
++}
++
++#if 1
++void dump_frame_list(dwc_otg_hcd_t * hcd)
++{
++	int i = 0;
++	DWC_PRINTF("--FRAME LIST (hex) --\n");
++	for (i = 0; i < MAX_FRLIST_EN_NUM; i++) {
++		DWC_PRINTF("%x\t", hcd->frame_list[i]);
++		if (!(i % 8) && i)
++			DWC_PRINTF("\n");
++	}
++	DWC_PRINTF("\n----\n");
++
++}
++#endif
++
++static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	dwc_irqflags_t flags;
++	dwc_spinlock_t *channel_lock = hcd->channel_lock;
++
++	dwc_hc_t *hc = qh->channel;
++	if (dwc_qh_is_non_per(qh)) {
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		if (!microframe_schedule)
++			hcd->non_periodic_channels--;
++		else
++			hcd->available_host_channels++;
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++	} else
++		update_frame_list(hcd, qh, 0);
++
++	/* 
++	 * The condition is added to prevent double cleanup try in case of device
++	 * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb().
++	 */
++	if (hc->qh) {
++		dwc_otg_hc_cleanup(hcd->core_if, hc);
++		DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
++		hc->qh = NULL;
++	}
++
++	qh->channel = NULL;
++	qh->ntd = 0;
++
++	if (qh->desc_list) {
++		dwc_memset(qh->desc_list, 0x00,
++			   sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh));
++	}
++}
++
++/** 
++ * Initializes a QH structure's Descriptor DMA related members.
++ * Allocates memory for descriptor list.
++ * On first periodic QH, allocates memory for FrameList 
++ * and enables periodic scheduling.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh The QH to init.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int retval = 0;
++
++	if (qh->do_split) {
++		DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n");
++    		return -1;
++    	}
++
++	retval = desc_list_alloc(qh);
++
++	if ((retval == 0)
++	    && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) {
++		if (!hcd->frame_list) {
++			retval = frame_list_alloc(hcd);
++			/* Enable periodic schedule on first periodic QH */
++			if (retval == 0)
++				per_sched_enable(hcd, MAX_FRLIST_EN_NUM);
++		}
++	}
++
++	qh->ntd = 0;
++
++	return retval;
++}
++
++/** 
++ * Frees descriptor list memory associated with the QH. 
++ * If QH is periodic and the last, frees FrameList memory 
++ * and disables periodic scheduling. 
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh The QH to init.
++ */
++void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	desc_list_free(qh);
++
++	/* 
++	 * Channel still assigned due to some reasons. 
++	 * Seen on Isoc URB dequeue. Channel halted but no subsequent
++	 * ChHalted interrupt to release the channel. Afterwards
++	 * when it comes here from endpoint disable routine
++	 * channel remains assigned.
++	 */
++	if (qh->channel)
++		release_channel_ddma(hcd, qh);
++
++	if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)
++	    && (microframe_schedule || !hcd->periodic_channels) && hcd->frame_list) {
++
++		per_sched_disable(hcd);
++		frame_list_free(hcd);
++	}
++}
++
++static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx)
++{
++	if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) {
++		/* 
++		 * Descriptor set(8 descriptors) index
++		 * which is 8-aligned.
++		 */
++		return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8;
++	} else {
++		return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1));
++	}
++}
++
++/* 
++ * Determine starting frame for Isochronous transfer. 
++ * Few frames skipped to prevent race condition with HC. 
++ */
++static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++				   uint8_t * skip_frames)
++{
++	uint16_t frame = 0;
++	hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd);
++	
++	/* sched_frame is always frame number(not uFrame) both in FS and HS !! */
++	
++	/* 
++	 * skip_frames is used to limit activated descriptors number
++	 * to avoid the situation when HC services the last activated
++	 * descriptor firstly.
++	 * Example for FS:
++	 * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor
++	 * corresponding to curr_frame+1, the descriptor corresponding to frame 2
++	 * will be fetched. If the number of descriptors is max=64 (or greather) the
++	 * list will be fully programmed with Active descriptors and it is possible
++	 * case(rare) that the latest descriptor(considering rollback) corresponding
++	 * to frame 2 will be serviced first. HS case is more probable because, in fact,
++	 * up to 11 uframes(16 in the code) may be skipped.
++	 */
++	if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) {
++		/* 
++		 * Consider uframe counter also, to start xfer asap.
++		 * If half of the frame elapsed skip 2 frames otherwise
++		 * just 1 frame. 
++		 * Starting descriptor index must be 8-aligned, so
++		 * if the current frame is near to complete the next one
++		 * is skipped as well.
++		 */
++
++		if (dwc_micro_frame_num(hcd->frame_number) >= 5) {
++			*skip_frames = 2 * 8;
++		 	frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames);
++		} else {
++			*skip_frames = 1 * 8;
++			frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames);
++		}
++
++		frame = dwc_full_frame_num(frame);
++	} else {
++		/* 
++		 * Two frames are skipped for FS - the current and the next.
++		 * But for descriptor programming, 1 frame(descriptor) is enough,
++		 * see example above.
++		 */
++		*skip_frames = 1;
++		frame = dwc_frame_num_inc(hcd->frame_number, 2);
++	}
++
++	return frame;
++}
++
++/* 
++ * Calculate initial descriptor index for isochronous transfer
++ * based on scheduled frame. 
++ */
++static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	uint16_t frame = 0, fr_idx, fr_idx_tmp;
++	uint8_t skip_frames = 0;
++	/* 
++	 * With current ISOC processing algorithm the channel is being
++	 * released when no more QTDs in the list(qh->ntd == 0).
++	 * Thus this function is called only when qh->ntd == 0 and qh->channel == 0. 
++	 *
++	 * So qh->channel != NULL branch is not used and just not removed from the
++	 * source file. It is required for another possible approach which is,
++	 * do not disable and release the channel when ISOC session completed, 
++	 * just move QH to inactive schedule until new QTD arrives. 
++	 * On new QTD, the QH moved back to 'ready' schedule,
++	 * starting frame and therefore starting desc_index are recalculated.
++	 * In this case channel is released only on ep_disable.
++	 */
++
++	/* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */
++	if (qh->channel) {
++		frame = calc_starting_frame(hcd, qh, &skip_frames);
++		/* 
++		 * Calculate initial descriptor index based on FrameList current bitmap
++		 * and servicing period.
++		 */
++		fr_idx_tmp = frame_list_idx(frame);
++		fr_idx =
++		    (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) -
++		     fr_idx_tmp)
++		    % frame_incr_val(qh);
++		fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM;
++	} else {
++		qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames);
++		fr_idx = frame_list_idx(qh->sched_frame);
++	}
++
++	qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx);
++
++	return skip_frames;
++}
++
++#define	ISOC_URB_GIVEBACK_ASAP
++
++#define MAX_ISOC_XFER_SIZE_FS 1023
++#define MAX_ISOC_XFER_SIZE_HS 3072
++#define DESCNUM_THRESHOLD 4
++
++static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++			       uint8_t skip_frames)
++{
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++	dwc_otg_qtd_t *qtd;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	uint16_t idx, inc, n_desc, ntd_max, max_xfer_size;
++
++	idx = qh->td_last;
++	inc = qh->interval;
++	n_desc = 0;
++
++	ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval;
++	if (skip_frames && !qh->channel)
++		ntd_max = ntd_max - skip_frames / qh->interval;
++
++	max_xfer_size =
++	    (qh->dev_speed ==
++	     DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS :
++	    MAX_ISOC_XFER_SIZE_FS;
++
++	DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) {
++		while ((qh->ntd < ntd_max)
++		       && (qtd->isoc_frame_index_last <
++			   qtd->urb->packet_count)) {
++
++			dma_desc = &qh->desc_list[idx];
++			dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t));
++
++			frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last];
++
++			if (frame_desc->length > max_xfer_size)
++				qh->n_bytes[idx] = max_xfer_size;
++			else
++				qh->n_bytes[idx] = frame_desc->length;
++			dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx];
++			dma_desc->status.b_isoc.a = 1;
++			dma_desc->status.b_isoc.sts = 0;
++
++			dma_desc->buf = qtd->urb->dma + frame_desc->offset;
++
++			qh->ntd++;
++
++			qtd->isoc_frame_index_last++;
++
++#ifdef	ISOC_URB_GIVEBACK_ASAP
++			/* 
++			 * Set IOC for each descriptor corresponding to the 
++			 * last frame of the URB.
++			 */
++			if (qtd->isoc_frame_index_last ==
++			    qtd->urb->packet_count)
++				dma_desc->status.b_isoc.ioc = 1;
++
++#endif
++			idx = desclist_idx_inc(idx, inc, qh->dev_speed);
++			n_desc++;
++
++		}
++		qtd->in_process = 1;
++	}
++
++	qh->td_last = idx;
++
++#ifdef	ISOC_URB_GIVEBACK_ASAP
++	/* Set IOC for the last descriptor if descriptor list is full */
++	if (qh->ntd == ntd_max) {
++		idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
++		qh->desc_list[idx].status.b_isoc.ioc = 1;
++	}
++#else
++	/* 
++	 * Set IOC bit only for one descriptor. 
++	 * Always try to be ahead of HW processing,
++	 * i.e. on IOC generation driver activates next descriptors but
++	 * core continues to process descriptors followed the one with IOC set.
++	 */
++
++	if (n_desc > DESCNUM_THRESHOLD) {
++		/* 
++		 * Move IOC "up". Required even if there is only one QTD 
++		 * in the list, cause QTDs migth continue to be queued,
++		 * but during the activation it was only one queued.
++		 * Actually more than one QTD might be in the list if this function called 
++		 * from XferCompletion - QTDs was queued during HW processing of the previous
++		 * descriptor chunk.
++		 */
++		idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed);
++	} else {
++		/* 
++		 * Set the IOC for the latest descriptor
++		 * if either number of descriptor is not greather than threshold
++		 * or no more new descriptors activated.
++		 */
++		idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
++	}
++
++	qh->desc_list[idx].status.b_isoc.ioc = 1;
++#endif
++}
++
++static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++
++	dwc_hc_t *hc;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	dwc_otg_qtd_t *qtd;
++	int num_packets, len, n_desc = 0;
++
++	hc = qh->channel;
++
++	/* 
++	 * Start with hc->xfer_buff initialized in 
++	 * assign_and_init_hc(), then if SG transfer consists of multiple URBs,
++	 * this pointer re-assigned to the buffer of the currently processed QTD.
++	 * For non-SG request there is always one QTD active.
++	 */
++
++	DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) {
++
++		if (n_desc) {
++			/* SG request - more than 1 QTDs */
++	 		hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length;
++			hc->xfer_len = qtd->urb->length - qtd->urb->actual_length;
++		}
++
++		qtd->n_desc = 0;
++
++		do {
++			dma_desc = &qh->desc_list[n_desc];
++			len = hc->xfer_len;
++
++			if (len > MAX_DMA_DESC_SIZE)
++				len = MAX_DMA_DESC_SIZE - hc->max_packet + 1;
++
++			if (hc->ep_is_in) {
++				if (len > 0) {
++					num_packets = (len + hc->max_packet - 1) / hc->max_packet;
++				} else {
++					/* Need 1 packet for transfer length of 0. */
++					num_packets = 1;
++				}
++				/* Always program an integral # of max packets for IN transfers. */
++				len = num_packets * hc->max_packet;
++			}
++
++			dma_desc->status.b.n_bytes = len;
++
++			qh->n_bytes[n_desc] = len;
++
++			if ((qh->ep_type == UE_CONTROL)
++			    && (qtd->control_phase == DWC_OTG_CONTROL_SETUP))
++				dma_desc->status.b.sup = 1;	/* Setup Packet */
++
++			dma_desc->status.b.a = 1;	/* Active descriptor */
++			dma_desc->status.b.sts = 0;
++
++			dma_desc->buf =
++			    ((unsigned long)hc->xfer_buff & 0xffffffff);
++
++			/* 
++			 * Last descriptor(or single) of IN transfer 
++			 * with actual size less than MaxPacket.
++			 */
++			if (len > hc->xfer_len) {
++				hc->xfer_len = 0;
++			} else {
++				hc->xfer_buff += len;
++				hc->xfer_len -= len;
++			}
++
++			qtd->n_desc++;
++			n_desc++;
++		}
++		while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC));
++		
++
++		qtd->in_process = 1;
++
++		if (qh->ep_type == UE_CONTROL)
++			break;
++
++		if (n_desc == MAX_DMA_DESC_NUM_GENERIC)
++			break;
++	}
++
++	if (n_desc) {
++		/* Request Transfer Complete interrupt for the last descriptor */
++		qh->desc_list[n_desc - 1].status.b.ioc = 1;
++		/* End of List indicator */
++		qh->desc_list[n_desc - 1].status.b.eol = 1;
++
++		hc->ntd = n_desc;
++	}
++}
++
++/** 
++ * For Control and Bulk endpoints initializes descriptor list
++ * and starts the transfer.
++ *
++ * For Interrupt and Isochronous endpoints initializes descriptor list
++ * then updates FrameList, marking appropriate entries as active.
++ * In case of Isochronous, the starting descriptor index is calculated based
++ * on the scheduled frame, but only on the first transfer descriptor within a session.
++ * Then starts the transfer via enabling the channel. 
++ * For Isochronous endpoint the channel is not halted on XferComplete 
++ * interrupt so remains assigned to the endpoint(QH) until session is done.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh The QH to init.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	/* Channel is already assigned */
++	dwc_hc_t *hc = qh->channel;
++	uint8_t skip_frames = 0;
++
++	switch (hc->ep_type) {
++	case DWC_OTG_EP_TYPE_CONTROL:
++	case DWC_OTG_EP_TYPE_BULK:
++		init_non_isoc_dma_desc(hcd, qh);
++
++		dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
++		break;
++	case DWC_OTG_EP_TYPE_INTR:
++		init_non_isoc_dma_desc(hcd, qh);
++
++		update_frame_list(hcd, qh, 1);
++
++		dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
++		break;
++	case DWC_OTG_EP_TYPE_ISOC:
++
++		if (!qh->ntd)
++			skip_frames = recalc_initial_desc_idx(hcd, qh);
++
++		init_isoc_dma_desc(hcd, qh, skip_frames);
++
++		if (!hc->xfer_started) {
++
++			update_frame_list(hcd, qh, 1);
++
++			/* 
++			 * Always set to max, instead of actual size.
++			 * Otherwise ntd will be changed with 
++			 * channel being enabled. Not recommended.
++			 *
++			 */
++			hc->ntd = max_desc_num(qh);
++			/* Enable channel only once for ISOC */
++			dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
++		}
++
++		break;
++	default:
++
++		break;
++	}
++}
++
++static void complete_isoc_xfer_ddma(dwc_otg_hcd_t * hcd,
++				    dwc_hc_t * hc,
++				    dwc_otg_hc_regs_t * hc_regs,
++				    dwc_otg_halt_status_e halt_status)
++{
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++	dwc_otg_qh_t *qh;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	uint16_t idx, remain;
++	uint8_t urb_compl;
++
++	qh = hc->qh;
++	idx = qh->td_first;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry)
++		    qtd->in_process = 0;
++		return;
++	} else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) ||
++		   (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) {
++		/* 
++		 * Channel is halted in these error cases.
++		 * Considered as serious issues.
++		 * Complete all URBs marking all frames as failed, 
++		 * irrespective whether some of the descriptors(frames) succeeded or no.
++		 * Pass error code to completion routine as well, to
++		 * update urb->status, some of class drivers might use it to stop
++		 * queing transfer requests.
++		 */
++		int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR)
++		    ? (-DWC_E_IO)
++		    : (-DWC_E_OVERFLOW);
++						
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
++			for (idx = 0; idx < qtd->urb->packet_count; idx++) {
++				frame_desc = &qtd->urb->iso_descs[idx];
++				frame_desc->status = err;
++			}
++			hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err);
++			dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++		}
++		return;
++	}
++
++	DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
++
++		if (!qtd->in_process)
++			break;
++
++		urb_compl = 0;
++
++		do {
++
++			dma_desc = &qh->desc_list[idx];
++			
++			frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
++			remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0;
++
++			if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) {
++				/* 
++				 * XactError or, unable to complete all the transactions 
++				 * in the scheduled micro-frame/frame, 
++				 * both indicated by DMA_DESC_STS_PKTERR.
++				 */
++				qtd->urb->error_count++;
++				frame_desc->actual_length = qh->n_bytes[idx] - remain;
++				frame_desc->status = -DWC_E_PROTOCOL;
++			} else {
++				/* Success */
++								
++				frame_desc->actual_length = qh->n_bytes[idx] - remain;
++				frame_desc->status = 0;
++			}
++
++			if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
++				/*
++				 * urb->status is not used for isoc transfers here.
++				 * The individual frame_desc status are used instead.
++				 */
++
++				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
++				dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++
++				/* 
++				 * This check is necessary because urb_dequeue can be called 
++				 * from urb complete callback(sound driver example).
++				 * All pending URBs are dequeued there, so no need for
++				 * further processing.
++				 */
++				if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {	
++					return;
++				}
++
++				urb_compl = 1;
++
++			}
++
++			qh->ntd--;
++
++			/* Stop if IOC requested descriptor reached */
++			if (dma_desc->status.b_isoc.ioc) {
++				idx = desclist_idx_inc(idx, qh->interval, hc->speed);	
++				goto stop_scan;
++			}
++
++			idx = desclist_idx_inc(idx, qh->interval, hc->speed);
++
++			if (urb_compl)
++				break;
++		}
++		while (idx != qh->td_first);
++	}
++stop_scan:
++	qh->td_first = idx;
++}
++
++uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_host_dma_desc_t * dma_desc,
++				       dwc_otg_halt_status_e halt_status,
++				       uint32_t n_bytes, uint8_t * xfer_done)
++{
++
++	uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0;
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++
++	if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		urb->status = -DWC_E_IO;
++		return 1;
++	}
++	if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) {
++		switch (halt_status) {
++		case DWC_OTG_HC_XFER_STALL:
++			urb->status = -DWC_E_PIPE;
++			break;
++		case DWC_OTG_HC_XFER_BABBLE_ERR:
++			urb->status = -DWC_E_OVERFLOW;
++			break;
++		case DWC_OTG_HC_XFER_XACT_ERR:
++			urb->status = -DWC_E_PROTOCOL;
++			break;
++		default:	
++			DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__,
++			  	  halt_status);
++			break;
++		}
++		return 1;
++	}
++
++	if (dma_desc->status.b.a == 1) {
++		DWC_DEBUGPL(DBG_HCDV,
++			    "Active descriptor encountered on channel %d\n",
++			    hc->hc_num);
++		return 0;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) {
++		if (qtd->control_phase == DWC_OTG_CONTROL_DATA) {
++			urb->actual_length += n_bytes - remain;
++			if (remain || urb->actual_length == urb->length) {
++				/* 
++				 * For Control Data stage do not set urb->status=0 to prevent
++				 * URB callback. Set it when Status phase done. See below.
++				 */
++				*xfer_done = 1;
++			}
++
++		} else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) {
++			urb->status = 0;
++			*xfer_done = 1;
++		}
++		/* No handling for SETUP stage */
++	} else {
++		/* BULK and INTR */
++		urb->actual_length += n_bytes - remain;
++		if (remain || urb->actual_length == urb->length) {
++			urb->status = 0;
++			*xfer_done = 1;
++		}
++	}
++
++	return 0;
++}
++
++static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd,
++					dwc_hc_t * hc,
++					dwc_otg_hc_regs_t * hc_regs,
++					dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_hcd_urb_t *urb = NULL;
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++	dwc_otg_qh_t *qh;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	uint32_t n_bytes, n_desc, i;
++	uint8_t failed = 0, xfer_done;
++
++	n_desc = 0;
++
++	qh = hc->qh;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
++			qtd->in_process = 0;
++		}
++		return;
++	}
++
++	DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
++
++		urb = qtd->urb;
++
++		n_bytes = 0;
++		xfer_done = 0;
++
++		for (i = 0; i < qtd->n_desc; i++) {
++			dma_desc = &qh->desc_list[n_desc];
++
++			n_bytes = qh->n_bytes[n_desc];
++
++			failed =
++			    update_non_isoc_urb_state_ddma(hcd, hc, qtd,
++							   dma_desc,
++							   halt_status, n_bytes,
++							   &xfer_done);
++
++			if (failed
++			    || (xfer_done
++				&& (urb->status != -DWC_E_IN_PROGRESS))) {
++
++				hcd->fops->complete(hcd, urb->priv, urb,
++						    urb->status);
++				dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++
++				if (failed)
++					goto stop_scan;
++			} else if (qh->ep_type == UE_CONTROL) {
++				if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) {
++					if (urb->length > 0) {
++						qtd->control_phase = DWC_OTG_CONTROL_DATA;
++					} else {
++						qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++					}
++					DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction done\n");
++				} else if (qtd->control_phase == DWC_OTG_CONTROL_DATA) {
++					if (xfer_done) {
++						qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++						DWC_DEBUGPL(DBG_HCDV, "  Control data transfer done\n");
++					} else if (i + 1 == qtd->n_desc) {
++						/* 
++						 * Last descriptor for Control data stage which is
++						 * not completed yet.
++						 */
++						dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++					}
++				}
++			}
++
++			n_desc++;
++		}
++
++	}
++
++stop_scan:
++
++	if (qh->ep_type != UE_CONTROL) {
++		/* 
++		 * Resetting the data toggle for bulk
++		 * and interrupt endpoints in case of stall. See handle_hc_stall_intr() 
++		 */
++		if (halt_status == DWC_OTG_HC_XFER_STALL)
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		else
++			dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++	}
++
++	if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		hcint_data_t hcint;
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++		if (hcint.b.nyet) {
++			/*
++			 * Got a NYET on the last transaction of the transfer. It
++			 * means that the endpoint should be in the PING state at the
++			 * beginning of the next transfer.
++			 */
++			qh->ping_state = 1;
++			clear_hc_int(hc_regs, nyet);
++		}
++
++	}
++
++}
++
++/**
++ * This function is called from interrupt handlers.
++ * Scans the descriptor list, updates URB's status and
++ * calls completion routine for the URB if it's done.
++ * Releases the channel to be used by other transfers.
++ * In case of Isochronous endpoint the channel is not halted until 
++ * the end of the session, i.e. QTD list is empty.
++ * If periodic channel released the FrameList is updated accordingly.
++ *
++ * Calls transaction selection routines to activate pending transfers.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param hc Host channel, the transfer is completed on.
++ * @param hc_regs Host channel registers.
++ * @param halt_status Reason the channel is being halted, 
++ *		      or just XferComplete for isochronous transfer
++ */
++void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd,
++				    dwc_hc_t * hc,
++				    dwc_otg_hc_regs_t * hc_regs,
++				    dwc_otg_halt_status_e halt_status)
++{
++	uint8_t continue_isoc_xfer = 0;
++	dwc_otg_transaction_type_e tr_type;
++	dwc_otg_qh_t *qh = hc->qh;
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++
++		complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status);
++
++		/* Release the channel if halted or session completed */
++		if (halt_status != DWC_OTG_HC_XFER_COMPLETE ||
++		    DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++
++			/* Halt the channel if session completed */
++			if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++				dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
++			}
++
++			release_channel_ddma(hcd, qh);
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		} else {
++			/* Keep in assigned schedule to continue transfer */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
++					   &qh->qh_list_entry);
++			continue_isoc_xfer = 1;
++
++		}
++		/** @todo Consider the case when period exceeds FrameList size.
++		 *  Frame Rollover interrupt should be used. 
++		 */
++	} else {
++		/* Scan descriptor list to complete the URB(s), then release the channel */
++		complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status);
++
++		release_channel_ddma(hcd, qh);
++		dwc_otg_hcd_qh_remove(hcd, qh);
++
++		if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule on normal completion */
++			dwc_otg_hcd_qh_add(hcd, qh);
++		}
++
++	}
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) {
++		if (continue_isoc_xfer) {
++			if (tr_type == DWC_OTG_TRANSACTION_NONE) {
++				tr_type = DWC_OTG_TRANSACTION_PERIODIC;
++			} else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) {
++				tr_type = DWC_OTG_TRANSACTION_ALL;
++			}
++		}
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,839 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
++ * $Revision: #58 $
++ * $Date: 2011/09/15 $
++ * $Change: 1846647 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#ifndef __DWC_HCD_H__
++#define __DWC_HCD_H__
++
++#include "dwc_otg_os_dep.h"
++#include "usb.h"
++#include "dwc_otg_hcd_if.h"
++#include "dwc_otg_core_if.h"
++#include "dwc_list.h"
++#include "dwc_otg_cil.h"
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Host Contoller Driver (HCD).
++ *
++ * The Host Controller Driver (HCD) is responsible for translating requests
++ * from the USB Driver into the appropriate actions on the DWC_otg controller.
++ * It isolates the USBD from the specifics of the controller by providing an
++ * API to the USBD.
++ */
++
++struct dwc_otg_hcd_pipe_info {
++	uint8_t dev_addr;
++	uint8_t ep_num;
++	uint8_t pipe_type;
++	uint8_t pipe_dir;
++	uint16_t mps;
++};
++
++struct dwc_otg_hcd_iso_packet_desc {
++	uint32_t offset;
++	uint32_t length;
++	uint32_t actual_length;
++	uint32_t status;
++};
++
++struct dwc_otg_qtd;
++
++struct dwc_otg_hcd_urb {
++	void *priv;
++	struct dwc_otg_qtd *qtd;
++	void *buf;
++	dwc_dma_t dma;
++	void *setup_packet;
++	dwc_dma_t setup_dma;
++	uint32_t length;
++	uint32_t actual_length;
++	uint32_t status;
++	uint32_t error_count;
++	uint32_t packet_count;
++	uint32_t flags;
++	uint16_t interval;
++	struct dwc_otg_hcd_pipe_info pipe_info;
++	struct dwc_otg_hcd_iso_packet_desc iso_descs[0];
++};
++
++static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe)
++{
++	return pipe->ep_num;
++}
++
++static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info
++						*pipe)
++{
++	return pipe->pipe_type;
++}
++
++static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe)
++{
++	return pipe->mps;
++}
++
++static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info
++					       *pipe)
++{
++	return pipe->dev_addr;
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info
++					       *pipe)
++{
++	return (pipe->pipe_type == UE_ISOCHRONOUS);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info
++					      *pipe)
++{
++	return (pipe->pipe_type == UE_INTERRUPT);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info
++					       *pipe)
++{
++	return (pipe->pipe_type == UE_BULK);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info
++						  *pipe)
++{
++	return (pipe->pipe_type == UE_CONTROL);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe)
++{
++	return (pipe->pipe_dir == UE_DIR_IN);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info
++					      *pipe)
++{
++	return (!dwc_otg_hcd_is_pipe_in(pipe));
++}
++
++static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe,
++					 uint8_t devaddr, uint8_t ep_num,
++					 uint8_t pipe_type, uint8_t pipe_dir,
++					 uint16_t mps)
++{
++	pipe->dev_addr = devaddr;
++	pipe->ep_num = ep_num;
++	pipe->pipe_type = pipe_type;
++	pipe->pipe_dir = pipe_dir;
++	pipe->mps = mps;
++}
++
++/**
++ * Phases for control transfers.
++ */
++typedef enum dwc_otg_control_phase {
++	DWC_OTG_CONTROL_SETUP,
++	DWC_OTG_CONTROL_DATA,
++	DWC_OTG_CONTROL_STATUS
++} dwc_otg_control_phase_e;
++
++/** Transaction types. */
++typedef enum dwc_otg_transaction_type {
++	DWC_OTG_TRANSACTION_NONE,
++	DWC_OTG_TRANSACTION_PERIODIC,
++	DWC_OTG_TRANSACTION_NON_PERIODIC,
++	DWC_OTG_TRANSACTION_ALL
++} dwc_otg_transaction_type_e;
++
++struct dwc_otg_qh;
++
++/**
++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
++ * interrupt, or isochronous transfer. A single QTD is created for each URB
++ * (of one of these types) submitted to the HCD. The transfer associated with
++ * a QTD may require one or multiple transactions.
++ *
++ * A QTD is linked to a Queue Head, which is entered in either the
++ * non-periodic or periodic schedule for execution. When a QTD is chosen for
++ * execution, some or all of its transactions may be executed. After
++ * execution, the state of the QTD is updated. The QTD may be retired if all
++ * its transactions are complete or if an error occurred. Otherwise, it
++ * remains in the schedule so more transactions can be executed later.
++ */
++typedef struct dwc_otg_qtd {
++	/**
++	 * Determines the PID of the next data packet for the data phase of
++	 * control transfers. Ignored for other transfer types.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t data_toggle;
++
++	/** Current phase for control transfers (Setup, Data, or Status). */
++	dwc_otg_control_phase_e control_phase;
++
++	/** Keep track of the current split type
++	 * for FS/LS endpoints on a HS Hub */
++	uint8_t complete_split;
++
++	/** How many bytes transferred during SSPLIT OUT */
++	uint32_t ssplit_out_xfer_count;
++
++	/**
++	 * Holds the number of bus errors that have occurred for a transaction
++	 * within this transfer.
++	 */
++	uint8_t error_count;
++
++	/**
++	 * Index of the next frame descriptor for an isochronous transfer. A
++	 * frame descriptor describes the buffer position and length of the
++	 * data to be transferred in the next scheduled (micro)frame of an
++	 * isochronous transfer. It also holds status for that transaction.
++	 * The frame index starts at 0.
++	 */
++	uint16_t isoc_frame_index;
++
++	/** Position of the ISOC split on full/low speed */
++	uint8_t isoc_split_pos;
++
++	/** Position of the ISOC split in the buffer for the current frame */
++	uint16_t isoc_split_offset;
++
++	/** URB for this transfer */
++	struct dwc_otg_hcd_urb *urb;
++
++	struct dwc_otg_qh *qh;
++
++	/** This list of QTDs */
++	 DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry;
++
++	/** Indicates if this QTD is currently processed by HW. */
++	uint8_t in_process;
++
++	/** Number of DMA descriptors for this QTD */
++	uint8_t n_desc;
++
++	/** 
++	 * Last activated frame(packet) index. 
++	 * Used in Descriptor DMA mode only.
++	 */
++	uint16_t isoc_frame_index_last;
++
++} dwc_otg_qtd_t;
++
++DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd);
++
++/**
++ * A Queue Head (QH) holds the static characteristics of an endpoint and
++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
++ * be entered in either the non-periodic or periodic schedule.
++ */
++typedef struct dwc_otg_qh {
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- UE_CONTROL
++	 *	- UE_BULK
++	 *	- UE_INTERRUPT
++	 *	- UE_ISOCHRONOUS
++	 */
++	uint8_t ep_type;
++	uint8_t ep_is_in;
++
++	/** wMaxPacketSize Field of Endpoint Descriptor. */
++	uint16_t maxp;
++
++	/**
++	 * Device speed.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	uint8_t dev_speed;
++
++	/**
++	 * Determines the PID of the next data packet for non-control
++	 * transfers. Ignored for control transfers.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t data_toggle;
++
++	/** Ping state if 1. */
++	uint8_t ping_state;
++
++	/**
++	 * List of QTDs for this QH.
++	 */
++	struct dwc_otg_qtd_list qtd_list;
++
++	/** Host channel currently processing transfers for this QH. */
++	struct dwc_hc *channel;
++
++	/** Full/low speed endpoint on high-speed hub requires split. */
++	uint8_t do_split;
++
++	/** @name Periodic schedule information */
++	/** @{ */
++
++	/** Bandwidth in microseconds per (micro)frame. */
++	uint16_t usecs;
++
++	/** Interval between transfers in (micro)frames. */
++	uint16_t interval;
++
++	/**
++	 * (micro)frame to initialize a periodic transfer. The transfer
++	 * executes in the following (micro)frame.
++	 */
++	uint16_t sched_frame;
++
++	/*
++	** Frame a NAK was received on this queue head, used to minimise NAK retransmission
++	*/
++	uint16_t nak_frame;
++
++	/** (micro)frame at which last start split was initialized. */
++	uint16_t start_split_frame;
++
++	/** @} */
++
++	/** 
++	 * Used instead of original buffer if 
++	 * it(physical address) is not dword-aligned.
++	 */
++	uint8_t *dw_align_buf;
++	dwc_dma_t dw_align_buf_dma;
++
++	/** Entry for QH in either the periodic or non-periodic schedule. */
++	dwc_list_link_t qh_list_entry;
++
++	/** @name Descriptor DMA support */
++	/** @{ */
++
++	/** Descriptor List. */
++	dwc_otg_host_dma_desc_t *desc_list;
++
++	/** Descriptor List physical address. */
++	dwc_dma_t desc_list_dma;
++
++	/** 
++	 * Xfer Bytes array.
++	 * Each element corresponds to a descriptor and indicates 
++	 * original XferSize size value for the descriptor.
++	 */
++	uint32_t *n_bytes;
++
++	/** Actual number of transfer descriptors in a list. */
++	uint16_t ntd;
++
++	/** First activated isochronous transfer descriptor index. */
++	uint8_t td_first;
++	/** Last activated isochronous transfer descriptor index. */
++	uint8_t td_last;
++
++	/** @} */
++
++
++	uint16_t speed;
++	uint16_t frame_usecs[8];
++} dwc_otg_qh_t;
++
++DWC_CIRCLEQ_HEAD(hc_list, dwc_hc);
++
++typedef struct urb_tq_entry {
++	struct urb *urb;
++	DWC_TAILQ_ENTRY(urb_tq_entry) urb_tq_entries;
++} urb_tq_entry_t;
++
++DWC_TAILQ_HEAD(urb_list, urb_tq_entry);
++
++/**
++ * This structure holds the state of the HCD, including the non-periodic and
++ * periodic schedules.
++ */
++struct dwc_otg_hcd {
++	/** The DWC otg device pointer */
++	struct dwc_otg_device *otg_dev;
++	/** DWC OTG Core Interface Layer */
++	dwc_otg_core_if_t *core_if;
++
++	/** Function HCD driver callbacks */
++	struct dwc_otg_hcd_function_ops *fops;
++
++	/** Internal DWC HCD Flags */
++	volatile union dwc_otg_hcd_internal_flags {
++		uint32_t d32;
++		struct {
++			unsigned port_connect_status_change:1;
++			unsigned port_connect_status:1;
++			unsigned port_reset_change:1;
++			unsigned port_enable_change:1;
++			unsigned port_suspend_change:1;
++			unsigned port_over_current_change:1;
++			unsigned port_l1_change:1;
++			unsigned reserved:26;
++		} b;
++	} flags;
++
++	/**
++	 * Inactive items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are not
++	 * currently assigned to a host channel.
++	 */
++	dwc_list_link_t non_periodic_sched_inactive;
++
++	/**
++	 * Active items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are
++	 * currently assigned to a host channel.
++	 */
++	dwc_list_link_t non_periodic_sched_active;
++
++	/**
++	 * Pointer to the next Queue Head to process in the active
++	 * non-periodic schedule.
++	 */
++	dwc_list_link_t *non_periodic_qh_ptr;
++
++	/**
++	 * Inactive items in the periodic schedule. This is a list of QHs for
++	 * periodic transfers that are _not_ scheduled for the next frame.
++	 * Each QH in the list has an interval counter that determines when it
++	 * needs to be scheduled for execution. This scheduling mechanism
++	 * allows only a simple calculation for periodic bandwidth used (i.e.
++	 * must assume that all periodic transfers may need to execute in the
++	 * same frame). However, it greatly simplifies scheduling and should
++	 * be sufficient for the vast majority of OTG hosts, which need to
++	 * connect to a small number of peripherals at one time.
++	 *
++	 * Items move from this list to periodic_sched_ready when the QH
++	 * interval counter is 0 at SOF.
++	 */
++	dwc_list_link_t periodic_sched_inactive;
++
++	/**
++	 * List of periodic QHs that are ready for execution in the next
++	 * frame, but have not yet been assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_assigned as host
++	 * channels become available during the current frame.
++	 */
++	dwc_list_link_t periodic_sched_ready;
++
++	/**
++	 * List of periodic QHs to be executed in the next frame that are
++	 * assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_queued as the
++	 * transactions for the QH are queued to the DWC_otg controller.
++	 */
++	dwc_list_link_t periodic_sched_assigned;
++
++	/**
++	 * List of periodic QHs that have been queued for execution.
++	 *
++	 * Items move from this list to either periodic_sched_inactive or
++	 * periodic_sched_ready when the channel associated with the transfer
++	 * is released. If the interval for the QH is 1, the item moves to
++	 * periodic_sched_ready because it must be rescheduled for the next
++	 * frame. Otherwise, the item moves to periodic_sched_inactive.
++	 */
++	dwc_list_link_t periodic_sched_queued;
++
++	/**
++	 * Total bandwidth claimed so far for periodic transfers. This value
++	 * is in microseconds per (micro)frame. The assumption is that all
++	 * periodic transfers may occur in the same (micro)frame.
++	 */
++	uint16_t periodic_usecs;
++
++	/**
++	 * Total bandwidth claimed so far for all periodic transfers
++	 * in a frame.
++	 * This will include a mixture of HS and FS transfers.
++	 * Units are microseconds per (micro)frame.
++	 * We have a budget per frame and have to schedule
++	 * transactions accordingly.
++	 * Watch out for the fact that things are actually scheduled for the
++	 * "next frame".
++	 */
++	uint16_t                frame_usecs[8];
++
++
++	/**
++	 * Frame number read from the core at SOF. The value ranges from 0 to
++	 * DWC_HFNUM_MAX_FRNUM.
++	 */
++	uint16_t frame_number;
++
++	/**
++	 * Count of periodic QHs, if using several eps. For SOF enable/disable.
++	 */
++	uint16_t periodic_qh_count;
++
++	/**
++	 * Free host channels in the controller. This is a list of
++	 * dwc_hc_t items.
++	 */
++	struct hc_list free_hc_list;
++	/**
++	 * Number of host channels assigned to periodic transfers. Currently
++	 * assuming that there is a dedicated host channel for each periodic
++	 * transaction and at least one host channel available for
++	 * non-periodic transactions.
++	 */
++	int periodic_channels; /* microframe_schedule==0 */
++
++	/**
++	 * Number of host channels assigned to non-periodic transfers.
++	 */
++	int non_periodic_channels; /* microframe_schedule==0 */
++
++	/**
++	 * Number of host channels assigned to non-periodic transfers.
++	 */
++	int available_host_channels;
++
++	/**
++	 * Array of pointers to the host channel descriptors. Allows accessing
++	 * a host channel descriptor given the host channel number. This is
++	 * useful in interrupt handlers.
++	 */
++	struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS];
++
++	/**
++	 * Buffer to use for any data received during the status phase of a
++	 * control transfer. Normally no data is transferred during the status
++	 * phase. This buffer is used as a bit bucket.
++	 */
++	uint8_t *status_buf;
++
++	/**
++	 * DMA address for status_buf.
++	 */
++	dma_addr_t status_buf_dma;
++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
++
++	/**
++	 * Connection timer. An OTG host must display a message if the device
++	 * does not connect. Started when the VBus power is turned on via
++	 * sysfs attribute "buspower".
++	 */
++	dwc_timer_t *conn_timer;
++
++	/* Tasket to do a reset */
++	dwc_tasklet_t *reset_tasklet;
++
++	dwc_tasklet_t *completion_tasklet;
++	struct urb_list completed_urb_list;
++
++	/*  */
++	dwc_spinlock_t *lock;
++	dwc_spinlock_t *channel_lock;
++	/**
++	 * Private data that could be used by OS wrapper.
++	 */
++	void *priv;
++
++	uint8_t otg_port;
++
++	/** Frame List */
++	uint32_t *frame_list;
++
++	/** Frame List DMA address */
++	dma_addr_t frame_list_dma;
++
++#ifdef DEBUG
++	uint32_t frrem_samples;
++	uint64_t frrem_accum;
++
++	uint32_t hfnum_7_samples_a;
++	uint64_t hfnum_7_frrem_accum_a;
++	uint32_t hfnum_0_samples_a;
++	uint64_t hfnum_0_frrem_accum_a;
++	uint32_t hfnum_other_samples_a;
++	uint64_t hfnum_other_frrem_accum_a;
++
++	uint32_t hfnum_7_samples_b;
++	uint64_t hfnum_7_frrem_accum_b;
++	uint32_t hfnum_0_samples_b;
++	uint64_t hfnum_0_frrem_accum_b;
++	uint32_t hfnum_other_samples_b;
++	uint64_t hfnum_other_frrem_accum_b;
++#endif
++};
++
++/** @name Transaction Execution Functions */
++/** @{ */
++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t
++								  * hcd);
++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
++					   dwc_otg_transaction_type_e tr_type);
++
++/** @} */
++
++/** @name Interrupt Handler Functions */
++/** @{ */
++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd, int32_t);
++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *
++							 dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *
++							dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *
++							   dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *
++							   dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *
++							     dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd,
++					    uint32_t num);
++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *
++						       dwc_otg_hcd);
++/** @} */
++
++/** @name Schedule Queue Functions */
++/** @{ */
++
++/* Implemented in dwc_otg_hcd_queue.c */
++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd,
++					   dwc_otg_hcd_urb_t * urb, int atomic_alloc);
++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++				      int sched_csplit);
++
++/** Remove and free a QH */
++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd,
++						  dwc_otg_qh_t * qh)
++{
++	dwc_irqflags_t flags;
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	dwc_otg_hcd_qh_remove(hcd, qh);
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	dwc_otg_hcd_qh_free(hcd, qh);
++}
++
++/** Allocates memory for a QH structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc)
++{
++	if (atomic_alloc)
++		return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t));
++	else
++		return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t));
++}
++
++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb,
++					     int atomic_alloc);
++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb);
++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd,
++			       dwc_otg_qh_t ** qh, int atomic_alloc);
++
++/** Allocates memory for a QTD structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc)
++{
++	if (atomic_alloc)
++		return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t));
++	else
++		return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t));
++}
++
++/** Frees the memory for a QTD structure.  QTD should already be removed from
++ * list.
++ * @param qtd QTD to free.*/
++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd)
++{
++	DWC_FREE(qtd);
++}
++
++/** Removes a QTD from list.
++ * @param hcd HCD instance.
++ * @param qtd QTD to remove from list.
++ * @param qh QTD belongs to.
++ */
++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd,
++					  dwc_otg_qtd_t * qtd,
++					  dwc_otg_qh_t * qh)
++{
++	DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry);
++}
++
++/** Remove and free a QTD 
++  * Need to disable IRQ and hold hcd lock while calling this function out of 
++  * interrupt servicing chain */
++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd,
++						   dwc_otg_qtd_t * qtd,
++						   dwc_otg_qh_t * qh)
++{
++	dwc_otg_hcd_qtd_remove(hcd, qtd, qh);
++	dwc_otg_hcd_qtd_free(qtd);
++}
++
++/** @} */
++
++/** @name Descriptor DMA Supporting Functions */
++/** @{ */
++
++extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd,
++					   dwc_hc_t * hc,
++					   dwc_otg_hc_regs_t * hc_regs,
++					   dwc_otg_halt_status_e halt_status);
++
++extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++
++/** @} */
++
++/** @name Internal Functions */
++/** @{ */
++dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb);
++/** @} */
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd,
++					   uint8_t devaddr);
++extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd);
++#endif
++
++/** Gets the QH that contains the list_head */
++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
++
++/** Gets the QTD that contains the list_head */
++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
++
++/** Check if QH is non-periodic  */
++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \
++				     (_qh_ptr_->ep_type == UE_CONTROL))
++
++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
++
++/** Packet size for any kind of endpoint descriptor */
++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
++
++/**
++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
++ * frame number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
++{
++	return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
++	    (DWC_HFNUM_MAX_FRNUM >> 1);
++}
++
++/**
++ * Returns true if _frame1 is greater than _frame2. The comparison is done
++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
++ * number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
++{
++	return (frame1 != frame2) &&
++	    (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
++	     (DWC_HFNUM_MAX_FRNUM >> 1));
++}
++
++/**
++ * Increments _frame by the amount specified by _inc. The addition is done
++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
++ */
++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
++{
++	return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
++}
++
++static inline uint16_t dwc_full_frame_num(uint16_t frame)
++{
++	return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
++}
++
++static inline uint16_t dwc_micro_frame_num(uint16_t frame)
++{
++	return frame & 0x7;
++}
++
++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc,
++				  dwc_otg_hc_regs_t * hc_regs,
++				  dwc_otg_qtd_t * qtd);
++
++#ifdef DEBUG
++/**
++ * Macro to sample the remaining PHY clocks left in the current frame. This
++ * may be used during debugging to determine the average time it takes to
++ * execute sections of code. There are two possible sample points, "a" and
++ * "b", so the _letter argument must be one of these values.
++ *
++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
++ * example, "cat /sys/devices/lm0/hcd_frrem".
++ */
++#define dwc_sample_frrem(_hcd, _qh, _letter) \
++{ \
++	hfnum_data_t hfnum; \
++	dwc_otg_qtd_t *qtd; \
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
++	if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
++		hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
++		switch (hfnum.b.frnum & 0x7) { \
++		case 7: \
++			_hcd->hfnum_7_samples_##_letter++; \
++			_hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		case 0: \
++			_hcd->hfnum_0_samples_##_letter++; \
++			_hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		default: \
++			_hcd->hfnum_other_samples_##_letter++; \
++			_hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		} \
++	} \
++}
++#else
++#define dwc_sample_frrem(_hcd, _qh, _letter)
++#endif
++#endif
++#endif /* DWC_DEVICE_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,417 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $
++ * $Revision: #12 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#ifndef __DWC_HCD_IF_H__
++#define __DWC_HCD_IF_H__
++
++#include "dwc_otg_core_if.h"
++
++/** @file
++ * This file defines DWC_OTG HCD Core API.
++ */
++
++struct dwc_otg_hcd;
++typedef struct dwc_otg_hcd dwc_otg_hcd_t;
++
++struct dwc_otg_hcd_urb;
++typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t;
++
++/** @name HCD Function Driver Callbacks */
++/** @{ */
++
++/** This function is called whenever core switches to host mode. */
++typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd);
++
++/** This function is called when device has been disconnected */
++typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd);
++
++/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */
++typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
++						   void *urb_handle,
++						   uint32_t * hub_addr,
++						   uint32_t * port_addr);
++/** Via this function HCD core gets device speed */
++typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
++						void *urb_handle);
++
++/** This function is called when urb is completed */
++typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd,
++					      void *urb_handle,
++					      dwc_otg_hcd_urb_t * dwc_otg_urb,
++					      int32_t status);
++
++/** Via this function HCD core gets b_hnp_enable parameter */
++typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd);
++
++struct dwc_otg_hcd_function_ops {
++	dwc_otg_hcd_start_cb_t start;
++	dwc_otg_hcd_disconnect_cb_t disconnect;
++	dwc_otg_hcd_hub_info_from_urb_cb_t hub_info;
++	dwc_otg_hcd_speed_from_urb_cb_t speed;
++	dwc_otg_hcd_complete_urb_cb_t complete;
++	dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable;
++};
++/** @} */
++
++/** @name HCD Core API */
++/** @{ */
++/** This function allocates dwc_otg_hcd structure and returns pointer on it. */
++extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void);
++
++/** This function should be called to initiate HCD Core.
++ *
++ * @param hcd The HCD
++ * @param core_if The DWC_OTG Core
++ *
++ * Returns -DWC_E_NO_MEMORY if no enough memory.
++ * Returns 0 on success  
++ */
++extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if);
++
++/** Frees HCD
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd);
++
++/** This function should be called on every hardware interrupt.
++ *
++ * @param dwc_otg_hcd The HCD
++ *
++ * Returns non zero if interrupt is handled
++ * Return 0 if interrupt is not handled
++ */
++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++
++/** This function is used to handle the fast interrupt
++ *
++ */
++extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void);
++
++/**
++ * Returns private data set by
++ * dwc_otg_hcd_set_priv_data function.
++ *
++ * @param hcd The HCD
++ */
++extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd);
++
++/**
++ * Set private data.
++ *
++ * @param hcd The HCD
++ * @param priv_data pointer to be stored in private data
++ */
++extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data);
++
++/**
++ * This function initializes the HCD Core.
++ *
++ * @param hcd The HCD
++ * @param fops The Function Driver Operations data structure containing pointers to all callbacks.
++ *
++ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd,
++			     struct dwc_otg_hcd_function_ops *fops);
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped. 
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd);
++
++/**
++ * Handles hub class-specific requests.
++ *
++ * @param dwc_otg_hcd The HCD
++ * @param typeReq Request Type
++ * @param wValue wValue from control request
++ * @param wIndex wIndex from control request
++ * @param buf data buffer 
++ * @param wLength data buffer length
++ *
++ * Returns -DWC_E_INVALID if invalid argument is passed
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd,
++				   uint16_t typeReq, uint16_t wValue,
++				   uint16_t wIndex, uint8_t * buf,
++				   uint16_t wLength);
++
++/**
++ * Returns otg port number.
++ *
++ * @param hcd The HCD
++ */
++extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd);
++
++/**
++ * Returns OTG version - either 1.3 or 2.0.
++ *
++ * @param core_if The core_if structure pointer
++ */
++extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if);
++
++/**
++ * Returns 1 if currently core is acting as B host, and 0 otherwise.
++ *
++ * @param hcd The HCD
++ */
++extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd);
++
++/**
++ * Returns current frame number.
++ *
++ * @param hcd The HCD
++ */
++extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd);
++
++/**
++ * Dumps hcd state.
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ * Currently this function is not implemented.
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd);
++
++/**
++ * Sends LPM transaction to the local device.
++ *
++ * @param hcd The HCD
++ * @param devaddr Device Address
++ * @param hird Host initiated resume duration
++ * @param bRemoteWake Value of bRemoteWake field in LPM transaction
++ *
++ * Returns negative value if sending LPM transaction was not succeeded.
++ * Returns 0 on success.
++ */
++extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr,
++				uint8_t hird, uint8_t bRemoteWake);
++
++/* URB interface */
++
++/**
++ * Allocates memory for dwc_otg_hcd_urb structure.
++ * Allocated memory should be freed by call of DWC_FREE.
++ *
++ * @param hcd The HCD
++ * @param iso_desc_count Count of ISOC descriptors
++ * @param atomic_alloc Specefies whether to perform atomic allocation.
++ */
++extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd,
++						int iso_desc_count,
++						int atomic_alloc);
++
++/**
++ * Set pipe information in URB.
++ *
++ * @param hcd_urb DWC_OTG URB
++ * @param devaddr Device Address
++ * @param ep_num Endpoint Number
++ * @param ep_type Endpoint Type
++ * @param ep_dir Endpoint Direction
++ * @param mps Max Packet Size
++ */
++extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb,
++					 uint8_t devaddr, uint8_t ep_num,
++					 uint8_t ep_type, uint8_t ep_dir,
++					 uint16_t mps);
++
++/* Transfer flags */
++#define URB_GIVEBACK_ASAP 0x1
++#define URB_SEND_ZERO_PACKET 0x2
++
++/**
++ * Sets dwc_otg_hcd_urb parameters.
++ *
++ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function.
++ * @param urb_handle Unique handle for request, this will be passed back
++ * to function driver in completion callback.
++ * @param buf The buffer for the data
++ * @param dma The DMA buffer for the data
++ * @param buflen Transfer length
++ * @param sp Buffer for setup data
++ * @param sp_dma DMA address of setup data buffer
++ * @param flags Transfer flags
++ * @param interval Polling interval for interrupt or isochronous transfers.
++ */
++extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb,
++				       void *urb_handle, void *buf,
++				       dwc_dma_t dma, uint32_t buflen, void *sp,
++				       dwc_dma_t sp_dma, uint32_t flags,
++				       uint16_t interval);
++
++/** Gets status from dwc_otg_hcd_urb
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb);
++
++/** Gets actual length from dwc_otg_hcd_urb
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t *
++						  dwc_otg_urb);
++
++/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t *
++						dwc_otg_urb);
++
++/** Set ISOC descriptor offset and length
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param desc_num ISOC descriptor number
++ * @param offset Offset from beginig of buffer.
++ * @param length Transaction length
++ */
++extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
++						int desc_num, uint32_t offset,
++						uint32_t length);
++
++/** Get status of ISOC descriptor, specified by desc_num
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param desc_num ISOC descriptor number 
++ */
++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t *
++						    dwc_otg_urb, int desc_num);
++
++/** Get actual length of ISOC descriptor, specified by desc_num
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param desc_num ISOC descriptor number
++ */
++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t *
++							   dwc_otg_urb,
++							   int desc_num);
++
++/** Queue URB. After transfer is completes, the complete callback will be called with the URB status
++ *
++ * @param dwc_otg_hcd The HCD
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param ep_handle Out parameter for returning endpoint handle
++ * @param atomic_alloc Flag to do atomic allocation if needed
++ *
++ * Returns -DWC_E_NO_DEVICE if no device is connected.
++ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
++ * Returns 0 on success.
++ */
++extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd,
++				   dwc_otg_hcd_urb_t * dwc_otg_urb,
++				   void **ep_handle, int atomic_alloc);
++
++/** De-queue the specified URB
++ *
++ * @param dwc_otg_hcd The HCD
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd,
++				   dwc_otg_hcd_urb_t * dwc_otg_urb);
++
++/** Frees resources in the DWC_otg controller related to a given endpoint.
++ * Any URBs for the endpoint must already be dequeued.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
++ * @param retry Number of retries if there are queued transfers.
++ *
++ * Returns -DWC_E_INVALID if invalid arguments are passed.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle,
++					int retry);
++
++/* Resets the data toggle in qh structure. This function can be called from
++ * usb_clear_halt routine.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
++ *
++ * Returns -DWC_E_INVALID if invalid arguments are passed.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle);
++
++/** Returns 1 if status of specified port is changed and 0 otherwise.
++ *
++ * @param hcd The HCD
++ * @param port Port number
++ */
++extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port);
++
++/** Call this function to check if bandwidth was allocated for specified endpoint.
++ * Only for ISOC and INTERRUPT endpoints.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle
++ */
++extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd,
++					      void *ep_handle);
++
++/** Call this function to check if bandwidth was freed for specified endpoint.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle
++ */
++extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle);
++
++/** Returns bandwidth allocated for specified endpoint in microseconds.
++ * Only for ISOC and INTERRUPT endpoints.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle
++ */
++extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd,
++					    void *ep_handle);
++
++/** @} */
++
++#endif /* __DWC_HCD_IF_H__ */
++#endif /* DWC_DEVICE_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,2258 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
++ * $Revision: #89 $
++ * $Date: 2011/10/20 $
++ * $Change: 1869487 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_mphi_fix.h"
++
++#include <linux/jiffies.h>
++#include <mach/hardware.h>
++
++
++extern bool microframe_schedule;
++
++/** @file
++ * This file contains the implementation of the HCD Interrupt handlers.
++ */
++
++/*
++ * Some globals to communicate between the FIQ and INTERRUPT
++ */
++
++void * dummy_send;
++mphi_regs_t c_mphi_regs;
++int fiq_done, int_done;
++int g_next_sched_frame, g_np_count, g_np_sent, g_work_expected;
++static int mphi_int_count = 0 ;
++
++extern bool fiq_fix_enable, nak_holdoff_enable;
++
++hcchar_data_t nak_hcchar;
++hctsiz_data_t nak_hctsiz;
++hcsplt_data_t nak_hcsplt;
++int nak_count;
++
++void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void)
++{
++	gintsts_data_t gintsts;
++	hfnum_data_t hfnum;
++
++	/* entry takes care to store registers we will be treading on here */
++	asm __volatile__ (
++		"mov     ip, sp ;"
++		/* stash FIQ and normal regs */
++		"stmdb	sp!, {r0-r12,  lr};"
++		/* !! THIS SETS THE FRAME, adjust to > sizeof locals */
++		"sub     fp, ip, #256 ;"
++		);
++
++	fiq_done++;
++	gintsts.d32 = FIQ_READ_IO_ADDRESS(USB_BASE + 0x14) & FIQ_READ_IO_ADDRESS(USB_BASE + 0x18);
++	hfnum.d32 =   FIQ_READ_IO_ADDRESS(USB_BASE + 0x408);
++
++	if(gintsts.d32)
++	{
++		if(gintsts.b.sofintr && g_np_count == g_np_sent && dwc_frame_num_gt(g_next_sched_frame, hfnum.b.frnum))
++		{
++			/*
++			 * If np_count != np_sent that means we need to queue non-periodic (bulk) packets this packet
++			 * g_next_sched_frame is the next frame we have periodic packets for
++			 *
++			 * if neither of these are required for this frame then just clear the interrupt
++			 */
++			gintsts.d32 = 0;
++			gintsts.b.sofintr = 1;
++			FIQ_WRITE_IO_ADDRESS((USB_BASE + 0x14), gintsts.d32);
++
++			g_work_expected = 0;
++		}
++		else
++		{
++			g_work_expected = 1;
++			/* To enable the MPHI interrupt  (INT 32)
++			 */
++			FIQ_WRITE(  c_mphi_regs.outdda, (int) dummy_send);
++			FIQ_WRITE( c_mphi_regs.outddb, (1 << 29));
++
++			mphi_int_count++;
++			/* Clear the USB global interrupt so we don't just sit in the FIQ */
++			FIQ_MODIFY_IO_ADDRESS((USB_BASE + 0x8),1,0);
++
++		}
++	}
++	mb();
++
++	/* exit back to normal mode restoring everything */
++	asm __volatile__ (
++		/* return FIQ regs back to pristine state
++		 * and get normal regs back
++		 */
++		"ldmia	sp!, {r0-r12, lr};"
++
++		/* return */
++		"subs	pc, lr, #4;"
++	);
++}
++
++/** This function handles interrupts for the HCD. */
++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int retval = 0;
++	static int last_time;
++
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	gintsts_data_t gintsts;
++	hfnum_data_t hfnum;
++
++#ifdef DEBUG
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++
++#endif
++
++	/* Exit from ISR if core is hibernated */
++	if (core_if->hibernation_suspend == 1) {
++		goto exit_handler_routine;
++	}
++	DWC_SPINLOCK(dwc_otg_hcd->lock);
++	/* Check if HOST Mode */
++	if (dwc_otg_is_host_mode(core_if)) {
++		gintsts.d32 = dwc_otg_read_core_intr(core_if);
++		if (!gintsts.d32) {
++			goto exit_handler_routine;
++		}
++#ifdef DEBUG
++		/* Don't print debug message in the interrupt handler on SOF */
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++			DWC_DEBUGPL(DBG_HCDI, "\n");
++#endif
++
++#ifdef DEBUG
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++			DWC_DEBUGPL(DBG_HCDI,
++				    "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n",
++				    gintsts.d32, core_if);
++#endif
++		hfnum.d32 = DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->hfnum);
++		if (gintsts.b.sofintr && g_np_count == g_np_sent && dwc_frame_num_gt(g_next_sched_frame, hfnum.b.frnum))
++		{
++			/* Note, we should never get here if the FIQ is doing it's job properly*/
++			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd, g_work_expected);
++		}
++		else if (gintsts.b.sofintr) {
++			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd, g_work_expected);
++		}
++		if (gintsts.b.rxstsqlvl) {
++			retval |=
++			    dwc_otg_hcd_handle_rx_status_q_level_intr
++			    (dwc_otg_hcd);
++		}
++		if (gintsts.b.nptxfempty) {
++			retval |=
++			    dwc_otg_hcd_handle_np_tx_fifo_empty_intr
++			    (dwc_otg_hcd);
++		}
++		if (gintsts.b.i2cintr) {
++			/** @todo Implement i2cintr handler. */
++		}
++		if (gintsts.b.portintr) {
++			retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.hcintr) {
++			retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.ptxfempty) {
++			retval |=
++			    dwc_otg_hcd_handle_perio_tx_fifo_empty_intr
++			    (dwc_otg_hcd);
++		}
++#ifdef DEBUG
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++		{
++			DWC_DEBUGPL(DBG_HCDI,
++				    "DWC OTG HCD Finished Servicing Interrupts\n");
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
++				    DWC_READ_REG32(&global_regs->gintsts));
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
++				    DWC_READ_REG32(&global_regs->gintmsk));
++		}
++#endif
++
++#ifdef DEBUG
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++			DWC_DEBUGPL(DBG_HCDI, "\n");
++#endif
++
++	}
++
++exit_handler_routine:
++
++	if (fiq_fix_enable)
++	{
++		/* Clear the MPHI interrupt */
++		DWC_WRITE_REG32(c_mphi_regs.intstat, (1<<16));
++		if (mphi_int_count >= 60)
++		{
++			DWC_WRITE_REG32(c_mphi_regs.ctrl, ((1<<31) + (1<<16)));
++			while(!(DWC_READ_REG32(c_mphi_regs.ctrl) & (1 << 17)))
++				;
++			DWC_WRITE_REG32(c_mphi_regs.ctrl, (1<<31));
++			mphi_int_count = 0;
++		}
++		int_done++;
++		if((jiffies / HZ) > last_time)
++		{
++			/* Once a second output the fiq and irq numbers, useful for debug */
++			last_time = jiffies / HZ;
++			DWC_DEBUGPL(DBG_USER, "int_done = %d fiq_done = %d\n", int_done, fiq_done);
++		}
++
++		/* Re-Enable FIQ interrupt from USB peripheral */
++		DWC_MODIFY_REG32((uint32_t *)IO_ADDRESS(USB_BASE + 0x8), 0 , 1);
++	}
++
++	DWC_SPINUNLOCK(dwc_otg_hcd->lock);
++	return retval;
++}
++
++#ifdef DWC_TRACK_MISSED_SOFS
++
++#warning Compiling code to track missed SOFs
++#define FRAME_NUM_ARRAY_SIZE 1000
++/**
++ * This function is for debug only.
++ */
++static inline void track_missed_sofs(uint16_t curr_frame_number)
++{
++	static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static int frame_num_idx = 0;
++	static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
++	static int dumped_frame_num_array = 0;
++
++	if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
++		if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) !=
++		    curr_frame_number) {
++			frame_num_array[frame_num_idx] = curr_frame_number;
++			last_frame_num_array[frame_num_idx++] = last_frame_num;
++		}
++	} else if (!dumped_frame_num_array) {
++		int i;
++		DWC_PRINTF("Frame     Last Frame\n");
++		DWC_PRINTF("-----     ----------\n");
++		for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
++			DWC_PRINTF("0x%04x    0x%04x\n",
++				   frame_num_array[i], last_frame_num_array[i]);
++		}
++		dumped_frame_num_array = 1;
++	}
++	last_frame_num = curr_frame_number;
++}
++#endif
++
++/**
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd, int32_t work_expected)
++{
++	hfnum_data_t hfnum;
++	dwc_list_link_t *qh_entry;
++	dwc_otg_qh_t *qh;
++	dwc_otg_transaction_type_e tr_type;
++	gintsts_data_t gintsts = {.d32 = 0 };
++	int did_something = 0;
++	int32_t next_sched_frame = -1;
++
++	hfnum.d32 =
++	    DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
++#endif
++	hcd->frame_number = hfnum.b.frnum;
++
++#ifdef DEBUG
++	hcd->frrem_accum += hfnum.b.frrem;
++	hcd->frrem_samples++;
++#endif
++
++#ifdef DWC_TRACK_MISSED_SOFS
++	track_missed_sofs(hcd->frame_number);
++#endif
++	/* Determine whether any periodic QHs should be executed. */
++	qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive);
++	while (qh_entry != &hcd->periodic_sched_inactive) {
++		qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry);
++		qh_entry = qh_entry->next;
++		if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
++			/*
++			 * Move QH to the ready list to be executed next
++			 * (micro)frame.
++			 */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready,
++					   &qh->qh_list_entry);
++
++			did_something = 1;
++		}
++		else
++		{
++			if(next_sched_frame < 0 || dwc_frame_num_le(qh->sched_frame, next_sched_frame))
++			{
++				next_sched_frame = qh->sched_frame;
++			}
++		}
++	}
++
++	g_next_sched_frame = next_sched_frame;
++
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++		did_something = 1;
++	}
++	if(work_expected && !did_something)
++		DWC_DEBUGPL(DBG_USER, "Nothing to do !! frame = %x, g_next_sched_frame = %x\n", (int) hfnum.b.frnum, g_next_sched_frame);
++	if(!work_expected && did_something)
++		DWC_DEBUGPL(DBG_USER, "Unexpected work done !! frame = %x, g_next_sched_frame = %x\n", (int) hfnum.b.frnum, g_next_sched_frame);
++
++
++	/* Clear interrupt */
++	gintsts.b.sofintr = 1;
++	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
++ * least one packet in the Rx FIFO.  The packets are moved from the FIFO to
++ * memory if the DWC_otg controller is operating in Slave mode. */
++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	host_grxsts_data_t grxsts;
++	dwc_hc_t *hc = NULL;
++
++	DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
++
++	grxsts.d32 =
++	    DWC_READ_REG32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
++
++	hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
++	if (!hc) {
++		DWC_ERROR("Unable to get corresponding channel\n");
++		return 0;
++	}
++
++	/* Packet Status */
++	DWC_DEBUGPL(DBG_HCDV, "    Ch num = %d\n", grxsts.b.chnum);
++	DWC_DEBUGPL(DBG_HCDV, "    Count = %d\n", grxsts.b.bcnt);
++	DWC_DEBUGPL(DBG_HCDV, "    DPID = %d, hc.dpid = %d\n", grxsts.b.dpid,
++		    hc->data_pid_start);
++	DWC_DEBUGPL(DBG_HCDV, "    PStatus = %d\n", grxsts.b.pktsts);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer. */
++		if (grxsts.b.bcnt > 0) {
++			dwc_otg_read_packet(dwc_otg_hcd->core_if,
++					    hc->xfer_buff, grxsts.b.bcnt);
++
++			/* Update the HC fields for the next packet received. */
++			hc->xfer_count += grxsts.b.bcnt;
++			hc->xfer_buff += grxsts.b.bcnt;
++		}
++
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++	case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
++	case DWC_GRXSTS_PKTSTS_CH_HALTED:
++		/* Handled in interrupt, just ignore data */
++		break;
++	default:
++		DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n",
++			  grxsts.b.pktsts);
++		break;
++	}
++
++	return 1;
++}
++
++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
++ * data packets may be written to the FIFO for OUT transfers. More requests
++ * may be written to the non-periodic request queue for IN transfers. This
++ * interrupt is enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_NON_PERIODIC);
++	return 1;
++}
++
++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
++ * packets may be written to the FIFO for OUT transfers. More requests may be
++ * written to the periodic request queue for IN transfers. This interrupt is
++ * enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_PERIODIC);
++	return 1;
++}
++
++/** There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int retval = 0;
++	hprt0_data_t hprt0;
++	hprt0_data_t hprt0_modify;
++
++	hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
++	hprt0_modify.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
++
++	/* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++	 * GINTSTS */
++
++	hprt0_modify.b.prtena = 0;
++	hprt0_modify.b.prtconndet = 0;
++	hprt0_modify.b.prtenchng = 0;
++	hprt0_modify.b.prtovrcurrchng = 0;
++
++	/* Port Connect Detected
++	 * Set flag and clear if detected */
++	if (dwc_otg_hcd->core_if->hibernation_suspend == 1) {
++		// Dont modify port status if we are in hibernation state
++		hprt0_modify.b.prtconndet = 1;
++		hprt0_modify.b.prtenchng = 1;
++		DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++		hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
++		return retval;
++	}
++
++	if (hprt0.b.prtconndet) {
++		/** @todo - check if steps performed in 'else' block should be perfromed regardles adp */
++		if (dwc_otg_hcd->core_if->adp_enable && 	
++				dwc_otg_hcd->core_if->adp.vbuson_timer_started == 1) {
++			DWC_PRINTF("PORT CONNECT DETECTED ----------------\n");
++			DWC_TIMER_CANCEL(dwc_otg_hcd->core_if->adp.vbuson_timer);
++			dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0;
++			/* TODO - check if this is required, as
++			 * host initialization was already performed
++			 * after initial ADP probing
++			 */
++			/*dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0;
++			dwc_otg_core_init(dwc_otg_hcd->core_if);
++			dwc_otg_enable_global_interrupts(dwc_otg_hcd->core_if);
++			cil_hcd_start(dwc_otg_hcd->core_if);*/
++		} else {
++		
++			DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++				    "Port Connect Detected--\n", hprt0.d32);
++			dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++			dwc_otg_hcd->flags.b.port_connect_status = 1;
++			hprt0_modify.b.prtconndet = 1;
++	
++			/* B-Device has connected, Delete the connection timer. */
++			DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer);
++		}
++		/* The Hub driver asserts a reset when it sees port connect
++		 * status change flag */
++		retval |= 1;
++	}
++
++	/* Port Enable Changed
++	 * Clear if detected - Set internal flag if disabled */
++	if (hprt0.b.prtenchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Enable Changed--\n", hprt0.d32);
++		hprt0_modify.b.prtenchng = 1;
++		if (hprt0.b.prtena == 1) {
++			hfir_data_t hfir;
++			int do_reset = 0;
++			dwc_otg_core_params_t *params =
++			    dwc_otg_hcd->core_if->core_params;
++			dwc_otg_core_global_regs_t *global_regs =
++			    dwc_otg_hcd->core_if->core_global_regs;
++			dwc_otg_host_if_t *host_if =
++			    dwc_otg_hcd->core_if->host_if;
++			    
++			/* Every time when port enables calculate
++			 * HFIR.FrInterval
++			 */
++			hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir);
++			hfir.b.frint = calc_frame_interval(dwc_otg_hcd->core_if);
++			DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32);
++
++			/* Check if we need to adjust the PHY clock speed for
++			 * low power and adjust it */
++			if (params->host_support_fs_ls_low_power) {
++				gusbcfg_data_t usbcfg;
++
++				usbcfg.d32 =
++				    DWC_READ_REG32(&global_regs->gusbcfg);
++
++				if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED
++				    || hprt0.b.prtspd ==
++				    DWC_HPRT0_PRTSPD_FULL_SPEED) {
++					/*
++					 * Low power
++					 */
++					hcfg_data_t hcfg;
++					if (usbcfg.b.phylpwrclksel == 0) {
++						/* Set PHY low power clock select for FS/LS devices */
++						usbcfg.b.phylpwrclksel = 1;
++						DWC_WRITE_REG32
++						    (&global_regs->gusbcfg,
++						     usbcfg.d32);
++						do_reset = 1;
++					}
++
++					hcfg.d32 =
++					    DWC_READ_REG32
++					    (&host_if->host_global_regs->hcfg);
++
++					if (hprt0.b.prtspd ==
++					    DWC_HPRT0_PRTSPD_LOW_SPEED
++					    && params->host_ls_low_power_phy_clk
++					    ==
++					    DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)
++					{
++						/* 6 MHZ */
++						DWC_DEBUGPL(DBG_CIL,
++							    "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
++						if (hcfg.b.fslspclksel !=
++						    DWC_HCFG_6_MHZ) {
++							hcfg.b.fslspclksel =
++							    DWC_HCFG_6_MHZ;
++							DWC_WRITE_REG32
++							    (&host_if->host_global_regs->hcfg,
++							     hcfg.d32);
++							do_reset = 1;
++						}
++					} else {
++						/* 48 MHZ */
++						DWC_DEBUGPL(DBG_CIL,
++							    "FS_PHY programming HCFG to 48 MHz ()\n");
++						if (hcfg.b.fslspclksel !=
++						    DWC_HCFG_48_MHZ) {
++							hcfg.b.fslspclksel =
++							    DWC_HCFG_48_MHZ;
++							DWC_WRITE_REG32
++							    (&host_if->host_global_regs->hcfg,
++							     hcfg.d32);
++							do_reset = 1;
++						}
++					}
++				} else {
++					/*
++					 * Not low power
++					 */
++					if (usbcfg.b.phylpwrclksel == 1) {
++						usbcfg.b.phylpwrclksel = 0;
++						DWC_WRITE_REG32
++						    (&global_regs->gusbcfg,
++						     usbcfg.d32);
++						do_reset = 1;
++					}
++				}
++
++				if (do_reset) {
++					DWC_TASK_SCHEDULE(dwc_otg_hcd->reset_tasklet);
++				}
++			}
++
++			if (!do_reset) {
++				/* Port has been enabled set the reset change flag */
++				dwc_otg_hcd->flags.b.port_reset_change = 1;
++			}
++		} else {
++			dwc_otg_hcd->flags.b.port_enable_change = 1;
++		}
++		retval |= 1;
++	}
++
++	/** Overcurrent Change Interrupt */
++	if (hprt0.b.prtovrcurrchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Overcurrent Changed--\n", hprt0.d32);
++		dwc_otg_hcd->flags.b.port_over_current_change = 1;
++		hprt0_modify.b.prtovrcurrchng = 1;
++		retval |= 1;
++	}
++
++	/* Clear Port Interrupts */
++	DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++
++	return retval;
++}
++
++/** This interrupt indicates that one or more host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for each
++ * host channel interrupt and handles them appropriately. */
++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int i;
++	int retval = 0;
++	haint_data_t haint;
++
++	/* Clear appropriate bits in HCINTn to clear the interrupt bit in
++	 * GINTSTS */
++
++	haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
++
++	for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
++		if (haint.b2.chint & (1 << i)) {
++			retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Gets the actual length of a transfer after the transfer halts. _halt_status
++ * holds the reason for the halt.
++ *
++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
++ * *short_read is set to 1 upon return if less than the requested
++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
++ * return. short_read may also be NULL on entry, in which case it remains
++ * unchanged.
++ */
++static uint32_t get_actual_xfer_length(dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_halt_status_e halt_status,
++				       int *short_read)
++{
++	hctsiz_data_t hctsiz;
++	uint32_t length;
++
++	if (short_read != NULL) {
++		*short_read = 0;
++	}
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++
++	if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		if (hc->ep_is_in) {
++			length = hc->xfer_len - hctsiz.b.xfersize;
++			if (short_read != NULL) {
++				*short_read = (hctsiz.b.xfersize != 0);
++			}
++		} else if (hc->qh->do_split) {
++			length = qtd->ssplit_out_xfer_count;
++		} else {
++			length = hc->xfer_len;
++		}
++	} else {
++		/*
++		 * Must use the hctsiz.pktcnt field to determine how much data
++		 * has been transferred. This field reflects the number of
++		 * packets that have been transferred via the USB. This is
++		 * always an integral number of packets if the transfer was
++		 * halted before its normal completion. (Can't use the
++		 * hctsiz.xfersize field because that reflects the number of
++		 * bytes transferred via the AHB, not the USB).
++		 */
++		length =
++		    (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
++	}
++
++	return length;
++}
++
++/**
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished.
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(dwc_hc_t * hc,
++				      dwc_otg_hc_regs_t * hc_regs,
++				      dwc_otg_hcd_urb_t * urb,
++				      dwc_otg_qtd_t * qtd)
++{
++	int xfer_done = 0;
++	int short_read = 0;
++
++	int xfer_length;
++
++	xfer_length = get_actual_xfer_length(hc, hc_regs, qtd,
++					     DWC_OTG_HC_XFER_COMPLETE,
++					     &short_read);
++
++
++	/* non DWORD-aligned buffer case handling. */
++	if (hc->align_buff && xfer_length && hc->ep_is_in) {
++		dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf,
++			   xfer_length);
++	}
++
++	urb->actual_length += xfer_length;
++
++	if (xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) &&
++	    (urb->flags & URB_SEND_ZERO_PACKET)
++	    && (urb->actual_length == urb->length)
++	    && !(urb->length % hc->max_packet)) {
++		xfer_done = 0;
++	} else if (short_read || urb->actual_length >= urb->length) {
++		xfer_done = 1;
++		urb->status = 0;
++	}
++	
++#ifdef DEBUG
++	{
++		hctsiz_data_t hctsiz;
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"),
++			    hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->xfer_len %d\n", hc->xfer_len);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.xfersize %d\n",
++			    hctsiz.b.xfersize);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n",
++			    urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  short_read %d, xfer_done %d\n",
++			    short_read, xfer_done);
++	}
++#endif
++
++	return xfer_done;
++}
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc,
++			     dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd)
++{
++	hctsiz_data_t hctsiz;
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++
++	if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
++		dwc_otg_qh_t *qh = hc->qh;
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	} else {
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	}
++}
++
++/**
++ * Updates the state of an Isochronous URB when the transfer is stopped for
++ * any reason. The fields of the current entry in the frame descriptor array
++ * are set based on the transfer state and the input _halt_status. Completes
++ * the Isochronous URB if all the URB frames have been completed.
++ *
++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
++ */
++static dwc_otg_halt_status_e
++update_isoc_urb_state(dwc_otg_hcd_t * hcd,
++		      dwc_hc_t * hc,
++		      dwc_otg_hc_regs_t * hc_regs,
++		      dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++	dwc_otg_halt_status_e ret_val = halt_status;
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++
++	frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_COMPLETE:
++		frame_desc->status = 0;
++		frame_desc->actual_length =
++		    get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL);
++
++		/* non DWORD-aligned buffer case handling. */
++		if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) {
++			dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset,
++				   hc->qh->dw_align_buf, frame_desc->actual_length);
++		}
++		
++		break;
++	case DWC_OTG_HC_XFER_FRAME_OVERRUN:
++		urb->error_count++;
++		if (hc->ep_is_in) {
++			frame_desc->status = -DWC_E_NO_STREAM_RES;
++		} else {
++			frame_desc->status = -DWC_E_COMMUNICATION;
++		}
++		frame_desc->actual_length = 0;
++		break;
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		urb->error_count++;
++		frame_desc->status = -DWC_E_OVERFLOW;
++		/* Don't need to update actual_length in this case. */
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		urb->error_count++;
++		frame_desc->status = -DWC_E_PROTOCOL;
++		frame_desc->actual_length =
++		    get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL);
++
++		/* non DWORD-aligned buffer case handling. */
++		if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) {
++			dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset,
++				   hc->qh->dw_align_buf, frame_desc->actual_length);
++		}
++		/* Skip whole frame */
++		if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) &&
++		    hc->ep_is_in && hcd->core_if->dma_enable) {
++			qtd->complete_split = 0;
++			qtd->isoc_split_offset = 0;
++		}
++
++		break;
++	default:
++		DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status);
++		break;
++	}
++	if (++qtd->isoc_frame_index == urb->packet_count) {
++		/*
++		 * urb->status is not used for isoc transfers.
++		 * The individual frame_desc statuses are used instead.
++		 */
++		hcd->fops->complete(hcd, urb->priv, urb, 0);
++		ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
++	} else {
++		ret_val = DWC_OTG_HC_XFER_COMPLETE;
++	}
++	return ret_val;
++}
++
++/**
++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
++ * still linked to the QH, the QH is added to the end of the inactive
++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
++ * schedule if no more QTDs are linked to the QH.
++ */
++static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd)
++{
++	int continue_split = 0;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
++
++	qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++
++	if (qtd->complete_split) {
++		continue_split = 1;
++	} else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
++		   qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
++		continue_split = 1;
++	}
++
++	if (free_qtd) {
++		dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++		continue_split = 0;
++	}
++
++	qh->channel = NULL;
++	dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
++}
++
++/**
++ * Releases a host channel for use by other transfers. Attempts to select and
++ * queue more transactions since at least one host channel is available.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc The host channel to release.
++ * @param qtd The QTD associated with the host channel. This QTD may be freed
++ * if the transfer is complete or an error has occurred.
++ * @param halt_status Reason the channel is being released. This status
++ * determines the actions taken by this function.
++ */
++static void release_channel(dwc_otg_hcd_t * hcd,
++			    dwc_hc_t * hc,
++			    dwc_otg_qtd_t * qtd,
++			    dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_transaction_type_e tr_type;
++	int free_qtd;
++	dwc_irqflags_t flags;
++	dwc_spinlock_t *channel_lock = hcd->channel_lock;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d, xfer_len %d\n",
++		    __func__, hc->hc_num, halt_status, hc->xfer_len);
++
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_URB_COMPLETE:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_AHB_ERR:
++	case DWC_OTG_HC_XFER_STALL:
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		if (qtd->error_count >= 3) {
++			DWC_DEBUGPL(DBG_HCDV,
++				    "  Complete URB with transaction error\n");
++			free_qtd = 1;
++			qtd->urb->status = -DWC_E_PROTOCOL;
++			hcd->fops->complete(hcd, qtd->urb->priv,
++					    qtd->urb, -DWC_E_PROTOCOL);
++		} else {
++			free_qtd = 0;
++		}
++		break;
++	case DWC_OTG_HC_XFER_URB_DEQUEUE:
++		/*
++		 * The QTD has already been removed and the QH has been
++		 * deactivated. Don't want to do anything except release the
++		 * host channel and try to queue more transfers.
++		 */
++		goto cleanup;
++	case DWC_OTG_HC_XFER_NO_HALT_STATUS:
++		free_qtd = 0;
++		break;
++	case DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE:
++		DWC_DEBUGPL(DBG_HCDV,
++			"  Complete URB with I/O error\n");
++		free_qtd = 1;
++		qtd->urb->status = -DWC_E_IO;
++		hcd->fops->complete(hcd, qtd->urb->priv,
++			qtd->urb, -DWC_E_IO);
++		break;
++	default:
++		free_qtd = 0;
++		break;
++	}
++
++	deactivate_qh(hcd, hc->qh, free_qtd);
++
++cleanup:
++	/*
++	 * Release the host channel for use by other transfers. The cleanup
++	 * function clears the channel interrupt enables and conditions, so
++	 * there's no need to clear the Channel Halted interrupt separately.
++	 */
++	dwc_otg_hc_cleanup(hcd->core_if, hc);
++	DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
++
++	if (!microframe_schedule) {
++		switch (hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hcd->non_periodic_channels--;
++			break;
++
++		default:
++			/*
++			 * Don't release reservations for periodic channels here.
++			 * That's done when a periodic transfer is descheduled (i.e.
++			 * when the QH is removed from the periodic schedule).
++			 */
++			break;
++		}
++	} else {
++
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		hcd->available_host_channels++;
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++	}
++
++	/* Try to queue more transfers now that there's a free channel. */
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++}
++
++/**
++ * Halts a host channel. If the channel cannot be halted immediately because
++ * the request queue is full, this function ensures that the FIFO empty
++ * interrupt for the appropriate queue is enabled so that the halt request can
++ * be queued when there is space in the request queue.
++ *
++ * This function may also be called in DMA mode. In that case, the channel is
++ * simply released since the core always halts the channel automatically in
++ * DMA mode.
++ */
++static void halt_channel(dwc_otg_hcd_t * hcd,
++			 dwc_hc_t * hc,
++			 dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status)
++{
++	if (hcd->core_if->dma_enable) {
++		release_channel(hcd, hc, qtd, halt_status);
++		return;
++	}
++
++	/* Slave mode processing... */
++	dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
++
++	if (hc->halt_on_queue) {
++		gintmsk_data_t gintmsk = {.d32 = 0 };
++		dwc_otg_core_global_regs_t *global_regs;
++		global_regs = hcd->core_if->core_global_regs;
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			/*
++			 * Make sure the Non-periodic Tx FIFO empty interrupt
++			 * is enabled so that the non-periodic schedule will
++			 * be processed.
++			 */
++			gintmsk.b.nptxfempty = 1;
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
++		} else {
++			/*
++			 * Move the QH from the periodic queued schedule to
++			 * the periodic assigned schedule. This allows the
++			 * halt to be queued when the periodic schedule is
++			 * processed.
++			 */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
++					   &hc->qh->qh_list_entry);
++
++			/*
++			 * Make sure the Periodic Tx FIFO Empty interrupt is
++			 * enabled so that the periodic schedule will be
++			 * processed.
++			 */
++			gintmsk.b.ptxfempty = 1;
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
++		}
++	}
++}
++
++/**
++ * Performs common cleanup for non-periodic transfers after a Transfer
++ * Complete interrupt. This function should be called after any endpoint type
++ * specific handling is finished to release the host channel.
++ */
++static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	hcint_data_t hcint;
++
++	qtd->error_count = 0;
++
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++	if (hcint.b.nyet) {
++		/*
++		 * Got a NYET on the last transaction of the transfer. This
++		 * means that the endpoint should be in the PING state at the
++		 * beginning of the next transfer.
++		 */
++		hc->qh->ping_state = 1;
++		clear_hc_int(hc_regs, nyet);
++	}
++
++	/*
++	 * Always halt and release the host channel to make it available for
++	 * more transfers. There may still be more phases for a control
++	 * transfer or more data packets for a bulk transfer at this point,
++	 * but the host channel is still halted. A channel will be reassigned
++	 * to the transfer when the non-periodic schedule is processed after
++	 * the channel is released. This allows transactions to be queued
++	 * properly via dwc_otg_hcd_queue_transactions, which also enables the
++	 * Tx FIFO Empty interrupt if necessary.
++	 */
++	if (hc->ep_is_in) {
++		/*
++		 * IN transfers in Slave mode require an explicit disable to
++		 * halt the channel. (In DMA mode, this call simply releases
++		 * the channel.)
++		 */
++		halt_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/*
++		 * The channel is automatically disabled by the core for OUT
++		 * transfers in Slave mode.
++		 */
++		release_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++/**
++ * Performs common cleanup for periodic transfers after a Transfer Complete
++ * interrupt. This function should be called after any endpoint type specific
++ * handling is finished to release the host channel.
++ */
++static void complete_periodic_xfer(dwc_otg_hcd_t * hcd,
++				   dwc_hc_t * hc,
++				   dwc_otg_hc_regs_t * hc_regs,
++				   dwc_otg_qtd_t * qtd,
++				   dwc_otg_halt_status_e halt_status)
++{
++	hctsiz_data_t hctsiz;
++	qtd->error_count = 0;
++
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++	if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
++		/* Core halts channel in these cases. */
++		release_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/* Flush any outstanding requests from the Tx queue. */
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd,
++					     dwc_hc_t * hc,
++					     dwc_otg_hc_regs_t * hc_regs,
++					     dwc_otg_qtd_t * qtd)
++{
++	uint32_t len;
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++	frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
++
++	len = get_actual_xfer_length(hc, hc_regs, qtd,
++				     DWC_OTG_HC_XFER_COMPLETE, NULL);
++
++	if (!len) {
++		qtd->complete_split = 0;
++		qtd->isoc_split_offset = 0;
++		return 0;
++	}
++	frame_desc->actual_length += len;
++
++	if (hc->align_buff && len)
++		dwc_memcpy(qtd->urb->buf + frame_desc->offset +
++			   qtd->isoc_split_offset, hc->qh->dw_align_buf, len);
++	qtd->isoc_split_offset += len;
++
++	if (frame_desc->length == frame_desc->actual_length) {
++		frame_desc->status = 0;
++		qtd->isoc_frame_index++;
++		qtd->complete_split = 0;
++		qtd->isoc_split_offset = 0;
++	}
++
++	if (qtd->isoc_frame_index == qtd->urb->packet_count) {
++		hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
++		release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
++	} else {
++		release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
++	}
++
++	return 1;		/* Indicates that channel released */
++}
++
++/**
++ * Handles a host channel Transfer Complete interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd)
++{
++	int urb_xfer_done;
++	dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++	int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
++
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Transfer Complete--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status);
++		if (pipe_type == UE_ISOCHRONOUS) {
++			/* Do not disable the interrupt, just clear it */
++			clear_hc_int(hc_regs, xfercomp);
++			return 1;
++		}
++		goto handle_xfercomp_done;
++	}
++
++	/*
++	 * Handle xfer complete on CSPLIT.
++	 */
++
++	if (hc->qh->do_split) {
++		if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in
++		    && hcd->core_if->dma_enable) {
++			if (qtd->complete_split
++			    && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs,
++							     qtd))
++				goto handle_xfercomp_done;
++		} else {
++			qtd->complete_split = 0;
++		}
++	}
++
++	/* Update the QTD and URB states. */
++	switch (pipe_type) {
++	case UE_CONTROL:
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			if (urb->length > 0) {
++				qtd->control_phase = DWC_OTG_CONTROL_DATA;
++			} else {
++				qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++			}
++			DWC_DEBUGPL(DBG_HCDV,
++				    "  Control setup transaction done\n");
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		case DWC_OTG_CONTROL_DATA:{
++				urb_xfer_done =
++				    update_urb_state_xfer_comp(hc, hc_regs, urb,
++							       qtd);
++				if (urb_xfer_done) {
++					qtd->control_phase =
++					    DWC_OTG_CONTROL_STATUS;
++					DWC_DEBUGPL(DBG_HCDV,
++						    "  Control data transfer done\n");
++				} else {
++					dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++				}
++				halt_status = DWC_OTG_HC_XFER_COMPLETE;
++				break;
++			}
++		case DWC_OTG_CONTROL_STATUS:
++			DWC_DEBUGPL(DBG_HCDV, "  Control transfer complete\n");
++			if (urb->status == -DWC_E_IN_PROGRESS) {
++				urb->status = 0;
++			}
++			hcd->fops->complete(hcd, urb->priv, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++			break;
++		}
++
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case UE_BULK:
++		DWC_DEBUGPL(DBG_HCDV, "  Bulk transfer complete\n");
++		urb_xfer_done =
++		    update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++		if (urb_xfer_done) {
++			hcd->fops->complete(hcd, urb->priv, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++
++		dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case UE_INTERRUPT:
++		DWC_DEBUGPL(DBG_HCDV, "  Interrupt transfer complete\n");
++		urb_xfer_done =
++			update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++
++		/*
++		 * Interrupt URB is done on the first transfer complete
++		 * interrupt.
++		 */
++		if (urb_xfer_done) {
++				hcd->fops->complete(hcd, urb->priv, urb, urb->status);
++				halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++				halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++
++		dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case UE_ISOCHRONOUS:
++		DWC_DEBUGPL(DBG_HCDV, "  Isochronous transfer complete\n");
++		if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++			halt_status =
++			    update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						  DWC_OTG_HC_XFER_COMPLETE);
++		}
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	}
++
++handle_xfercomp_done:
++	disable_hc_int(hc_regs, xfercompl);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel STALL interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd,
++				    dwc_hc_t * hc,
++				    dwc_otg_hc_regs_t * hc_regs,
++				    dwc_otg_qtd_t * qtd)
++{
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++	int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "STALL Received--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL);
++		goto handle_stall_done;
++	}
++
++	if (pipe_type == UE_CONTROL) {
++		hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE);
++	}
++
++	if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) {
++		hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE);
++		/*
++		 * USB protocol requires resetting the data toggle for bulk
++		 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
++		 * setup command is issued to the endpoint. Anticipate the
++		 * CLEAR_FEATURE command since a STALL has occurred and reset
++		 * the data toggle now.
++		 */
++		hc->qh->data_toggle = 0;
++	}
++
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
++
++handle_stall_done:
++	disable_hc_int(hc_regs, stall);
++
++	return 1;
++}
++
++/*
++ * Updates the state of the URB when a transfer has been stopped due to an
++ * abnormal condition before the transfer completes. Modifies the
++ * actual_length field of the URB to reflect the number of bytes that have
++ * actually been transferred via the host channel.
++ */
++static void update_urb_state_xfer_intr(dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_hcd_urb_t * urb,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
++							    halt_status, NULL);
++	/* non DWORD-aligned buffer case handling. */
++	if (hc->align_buff && bytes_transferred && hc->ep_is_in) {
++		dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf,
++			   bytes_transferred);
++	}
++
++	urb->actual_length += bytes_transferred;
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t hctsiz;
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"),
++			    hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->start_pkt_count %d\n",
++			    hc->start_pkt_count);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->max_packet %d\n", hc->max_packet);
++		DWC_DEBUGPL(DBG_HCDV, "  bytes_transferred %d\n",
++			    bytes_transferred);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n",
++			    urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->length);
++	}
++#endif
++}
++
++/**
++ * Handles a host channel NAK interrupt. This handler may be called in either
++ * DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd,
++				  dwc_hc_t * hc,
++				  dwc_otg_hc_regs_t * hc_regs,
++				  dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "NAK Received--\n", hc->hc_num);
++
++	/*
++	 * When we get bulk NAKs then remember this so we holdoff on this qh until
++	 * the beginning of the next frame
++	 */
++	switch(dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++		case UE_BULK:
++		//case UE_INTERRUPT:
++		//case UE_CONTROL:
++		if (nak_holdoff_enable)
++			hc->qh->nak_frame = dwc_otg_hcd_get_frame_number(hcd);
++	}
++
++	/*
++	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
++	 * interrupt.  Re-start the SSPLIT transfer.
++	 */
++	if (hc->do_split) {
++		if (hc->complete_split) {
++			qtd->error_count = 0;
++		}
++		qtd->complete_split = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		goto handle_nak_done;
++	}
++
++	switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++	case UE_CONTROL:
++	case UE_BULK:
++		if (hcd->core_if->dma_enable && hc->ep_is_in) {
++			/*
++			 * NAK interrupts are enabled on bulk/control IN
++			 * transfers in DMA mode for the sole purpose of
++			 * resetting the error count after a transaction error
++			 * occurs. The core will continue transferring data.
++			 */
++			qtd->error_count = 0;
++			goto handle_nak_done;
++		}
++
++		/*
++		 * NAK interrupts normally occur during OUT transfers in DMA
++		 * or Slave mode. For IN transfers, more requests will be
++		 * queued as request queue space is available.
++		 */
++		qtd->error_count = 0;
++
++		if (!hc->qh->ping_state) {
++			update_urb_state_xfer_intr(hc, hc_regs,
++						   qtd->urb, qtd,
++						   DWC_OTG_HC_XFER_NAK);
++			dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++
++			if (hc->speed == DWC_OTG_EP_SPEED_HIGH)
++				hc->qh->ping_state = 1;
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will
++		 * start/continue.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case UE_INTERRUPT:
++		qtd->error_count = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case UE_ISOCHRONOUS:
++		/* Should never get called for isochronous transfers. */
++		DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n");
++		break;
++	}
++
++handle_nak_done:
++	disable_hc_int(hc_regs, nak);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * performing the PING protocol in Slave mode, when errors occur during
++ * either Slave mode or DMA mode, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd,
++				  dwc_hc_t * hc,
++				  dwc_otg_hc_regs_t * hc_regs,
++				  dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "ACK Received--\n", hc->hc_num);
++
++	if (hc->do_split) {
++		/*
++		 * Handle ACK on SSPLIT.
++		 * ACK should not occur in CSPLIT.
++		 */
++		if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
++			qtd->ssplit_out_xfer_count = hc->xfer_len;
++		}
++		if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
++			/* Don't need complete for isochronous out transfers. */
++			qtd->complete_split = 1;
++		}
++
++		/* ISOC OUT */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			switch (hc->xact_pos) {
++			case DWC_HCSPLIT_XACTPOS_ALL:
++				break;
++			case DWC_HCSPLIT_XACTPOS_END:
++				qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				qtd->isoc_split_offset = 0;
++				break;
++			case DWC_HCSPLIT_XACTPOS_BEGIN:
++			case DWC_HCSPLIT_XACTPOS_MID:
++				/*
++				 * For BEGIN or MID, calculate the length for
++				 * the next microframe to determine the correct
++				 * SSPLIT token, either MID or END.
++				 */
++				{
++					struct dwc_otg_hcd_iso_packet_desc
++					*frame_desc;
++
++					frame_desc =
++					    &qtd->urb->
++					    iso_descs[qtd->isoc_frame_index];
++					qtd->isoc_split_offset += 188;
++
++					if ((frame_desc->length -
++					     qtd->isoc_split_offset) <= 188) {
++						qtd->isoc_split_pos =
++						    DWC_HCSPLIT_XACTPOS_END;
++					} else {
++						qtd->isoc_split_pos =
++						    DWC_HCSPLIT_XACTPOS_MID;
++					}
++
++				}
++				break;
++			}
++		} else {
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	} else {
++		qtd->error_count = 0;
++
++		if (hc->qh->ping_state) {
++			hc->qh->ping_state = 0;
++			/*
++			 * Halt the channel so the transfer can be re-started
++			 * from the appropriate point. This only happens in
++			 * Slave mode. In DMA mode, the ping_state is cleared
++			 * when the transfer is started because the core
++			 * automatically executes the PING, then the transfer.
++			 */
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	}
++
++	/*
++	 * If the ACK occurred when _not_ in the PING state, let the channel
++	 * continue transferring data after clearing the error count.
++	 */
++
++	disable_hc_int(hc_regs, ack);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel NYET interrupt. This interrupt should only occur on
++ * Bulk and Control OUT endpoints and for complete split transactions. If a
++ * NYET occurs at the same time as a Transfer Complete interrupt, it is
++ * handled in the xfercomp interrupt handler, not here. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd,
++				   dwc_hc_t * hc,
++				   dwc_otg_hc_regs_t * hc_regs,
++				   dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "NYET Received--\n", hc->hc_num);
++
++	/*
++	 * NYET on CSPLIT
++	 * re-do the CSPLIT immediately on non-periodic
++	 */
++	if (hc->do_split && hc->complete_split) {
++		if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++		    && hcd->core_if->dma_enable) {
++			qtd->complete_split = 0;
++			qtd->isoc_split_offset = 0;
++			if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
++				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
++				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);	
++			}
++			else
++				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);	
++			goto handle_nyet_done;
++		}
++		
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			int frnum = dwc_otg_hcd_get_frame_number(hcd);
++
++			if (dwc_full_frame_num(frnum) !=
++			    dwc_full_frame_num(hc->qh->sched_frame)) {
++				/*
++				 * No longer in the same full speed frame.
++				 * Treat this as a transaction error.
++				 */
++#if 0
++				/** @todo Fix system performance so this can
++				 * be treated as an error. Right now complete
++				 * splits cannot be scheduled precisely enough
++				 * due to other system activity, so this error
++				 * occurs regularly in Slave mode.
++				 */
++				qtd->error_count++;
++#endif
++				qtd->complete_split = 0;
++				halt_channel(hcd, hc, qtd,
++					     DWC_OTG_HC_XFER_XACT_ERR);
++				/** @todo add support for isoc release */
++				goto handle_nyet_done;
++			}
++		}
++
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++		goto handle_nyet_done;
++	}
++
++	hc->qh->ping_state = 1;
++	qtd->error_count = 0;
++
++	update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
++				   DWC_OTG_HC_XFER_NYET);
++	dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++
++	/*
++	 * Halt the channel and re-start the transfer so the PING
++	 * protocol will start.
++	 */
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++
++handle_nyet_done:
++	disable_hc_int(hc_regs, nyet);
++	return 1;
++}
++
++/**
++ * Handles a host channel babble interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd,
++				     dwc_hc_t * hc,
++				     dwc_otg_hc_regs_t * hc_regs,
++				     dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Babble Error--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++					       DWC_OTG_HC_XFER_BABBLE_ERR);
++		goto handle_babble_done;
++	}
++
++	if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++		hcd->fops->complete(hcd, qtd->urb->priv,
++				    qtd->urb, -DWC_E_OVERFLOW);
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
++	} else {
++		dwc_otg_halt_status_e halt_status;
++		halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						    DWC_OTG_HC_XFER_BABBLE_ERR);
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++
++handle_babble_done:
++	disable_hc_int(hc_regs, bblerr);
++	return 1;
++}
++
++/**
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd,
++				     dwc_hc_t * hc,
++				     dwc_otg_hc_regs_t * hc_regs,
++				     dwc_otg_qtd_t * qtd)
++{
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++	hctsiz_data_t hctsiz;
++	uint32_t hcdma;
++	char *pipetype, *speed;
++
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "AHB Error--\n", hc->hc_num);
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++	hcdma = DWC_READ_REG32(&hc_regs->hcdma);
++
++	DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
++	DWC_ERROR("  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++	DWC_ERROR("  hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
++	DWC_ERROR("  Device address: %d\n",
++		  dwc_otg_hcd_get_dev_addr(&urb->pipe_info));
++	DWC_ERROR("  Endpoint: %d, %s\n",
++		  dwc_otg_hcd_get_ep_num(&urb->pipe_info),
++		  (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"));
++
++	switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) {
++	case UE_CONTROL:
++		pipetype = "CONTROL";
++		break;
++	case UE_BULK:
++		pipetype = "BULK";
++		break;
++	case UE_INTERRUPT:
++		pipetype = "INTERRUPT";
++		break;
++	case UE_ISOCHRONOUS:
++		pipetype = "ISOCHRONOUS";
++		break;
++	default:
++		pipetype = "UNKNOWN";
++		break;
++	}
++
++	DWC_ERROR("  Endpoint type: %s\n", pipetype);
++
++	switch (hc->speed) {
++	case DWC_OTG_EP_SPEED_HIGH:
++		speed = "HIGH";
++		break;
++	case DWC_OTG_EP_SPEED_FULL:
++		speed = "FULL";
++		break;
++	case DWC_OTG_EP_SPEED_LOW:
++		speed = "LOW";
++		break;
++	default:
++		speed = "UNKNOWN";
++		break;
++	};
++
++	DWC_ERROR("  Speed: %s\n", speed);
++
++	DWC_ERROR("  Max packet size: %d\n",
++		  dwc_otg_hcd_get_mps(&urb->pipe_info));
++	DWC_ERROR("  Data buffer length: %d\n", urb->length);
++	DWC_ERROR("  Transfer buffer: %p, Transfer DMA: %p\n",
++		  urb->buf, (void *)urb->dma);
++	DWC_ERROR("  Setup buffer: %p, Setup DMA: %p\n",
++		  urb->setup_packet, (void *)urb->setup_dma);
++	DWC_ERROR("  Interval: %d\n", urb->interval);
++
++	/* Core haltes the channel for Descriptor DMA mode */
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++					       DWC_OTG_HC_XFER_AHB_ERR);
++		goto handle_ahberr_done;
++	}
++
++	hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO);
++
++	/*
++	 * Force a channel halt. Don't call halt_channel because that won't
++	 * write to the HCCHARn register in DMA mode to force the halt.
++	 */
++	dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
++handle_ahberr_done:
++	disable_hc_int(hc_regs, ahberr);
++	return 1;
++}
++
++/**
++ * Handles a host channel transaction error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd,
++				      dwc_hc_t * hc,
++				      dwc_otg_hc_regs_t * hc_regs,
++				      dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Transaction Error--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++					       DWC_OTG_HC_XFER_XACT_ERR);
++		goto handle_xacterr_done;
++	}
++
++	switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++	case UE_CONTROL:
++	case UE_BULK:
++		qtd->error_count++;
++		if (!hc->qh->ping_state) {
++
++			update_urb_state_xfer_intr(hc, hc_regs,
++						   qtd->urb, qtd,
++						   DWC_OTG_HC_XFER_XACT_ERR);
++			dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++			if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++				hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will start.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case UE_INTERRUPT:
++		qtd->error_count++;
++		if (hc->do_split && hc->complete_split) {
++			qtd->complete_split = 0;
++		}
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case UE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status =
++			    update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						  DWC_OTG_HC_XFER_XACT_ERR);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++handle_xacterr_done:
++	disable_hc_int(hc_regs, xacterr);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel frame overrun interrupt. This handler may be called
++ * in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Frame Overrun--\n", hc->hc_num);
++
++	switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++	case UE_CONTROL:
++	case UE_BULK:
++		break;
++	case UE_INTERRUPT:
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
++		break;
++	case UE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status =
++			    update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						  DWC_OTG_HC_XFER_FRAME_OVERRUN);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++
++	disable_hc_int(hc_regs, frmovrun);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel data toggle error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd,
++					 dwc_hc_t * hc,
++					 dwc_otg_hc_regs_t * hc_regs,
++					 dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		"Data Toggle Error on %s transfer--\n",
++		hc->hc_num, (hc->ep_is_in ? "IN" : "OUT"));
++
++	/* Data toggles on split transactions cause the hc to halt.
++	 * restart transfer */
++	if(hc->qh->do_split)
++	{
++		qtd->error_count++;
++		dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++		update_urb_state_xfer_intr(hc, hc_regs,
++			qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++	} else if (hc->ep_is_in) {
++		qtd->error_count = 0;
++	}
++
++	disable_hc_int(hc_regs, datatglerr);
++
++	return 1;
++}
++
++#ifdef DEBUG
++/**
++ * This function is for debug only. It checks that a valid halt status is set
++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
++ * taken and a warning is issued.
++ * @return 1 if halt status is ok, 0 otherwise.
++ */
++static inline int halt_status_ok(dwc_otg_hcd_t * hcd,
++				 dwc_hc_t * hc,
++				 dwc_otg_hc_regs_t * hc_regs,
++				 dwc_otg_qtd_t * qtd)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	hcsplt_data_t hcsplt;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
++		/*
++		 * This code is here only as a check. This condition should
++		 * never happen. Ignore the halt if it does occur.
++		 */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++		hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
++		hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++		DWC_WARN
++		    ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
++		     "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
++		     "hcint 0x%08x, hcintmsk 0x%08x, "
++		     "hcsplt 0x%08x, qtd->complete_split %d\n", __func__,
++		     hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32,
++		     hcintmsk.d32, hcsplt.d32, qtd->complete_split);
++
++		DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
++			 __func__, hc->hc_num);
++		DWC_WARN("\n");
++		clear_hc_int(hc_regs, chhltd);
++		return 0;
++	}
++
++	/*
++	 * This code is here only as a check. hcchar.chdis should
++	 * never be set when the halt interrupt occurs. Halt the
++	 * channel again if it does occur.
++	 */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: hcchar.chdis set unexpectedly, "
++			 "hcchar 0x%08x, trying to halt again\n",
++			 __func__, hcchar.d32);
++		clear_hc_int(hc_regs, chhltd);
++		hc->halt_pending = 0;
++		halt_channel(hcd, hc, qtd, hc->halt_status);
++		return 0;
++	}
++
++	return 1;
++}
++#endif
++
++/**
++ * Handles a host Channel Halted interrupt in DMA mode. This handler
++ * determines the reason the channel halted and proceeds accordingly.
++ */
++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd,
++				      dwc_hc_t * hc,
++				      dwc_otg_hc_regs_t * hc_regs,
++				      dwc_otg_qtd_t * qtd)
++{
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	int out_nak_enh = 0;
++
++	/* For core with OUT NAK enhancement, the flow for high-
++	 * speed CONTROL/BULK OUT is handled a little differently.
++	 */
++	if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) {
++		if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
++		    (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		     hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
++			out_nak_enh = 1;
++		}
++	}
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR
++	     && !hcd->core_if->dma_desc_enable)) {
++		/*
++		 * Just release the channel. A dequeue can happen on a
++		 * transfer timeout. In the case of an AHB Error, the channel
++		 * was forced to halt because there's no way to gracefully
++		 * recover.
++		 */
++		if (hcd->core_if->dma_desc_enable)
++			dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++						       hc->halt_status);
++		else
++			release_channel(hcd, hc, qtd, hc->halt_status);
++		return;
++	}
++
++	/* Read the HCINTn register to determine the cause for the halt. */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++	hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
++
++	if (hcint.b.xfercomp) {
++		/** @todo This is here because of a possible hardware bug.  Spec
++		 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
++		 * interrupt w/ACK bit set should occur, but I only see the
++		 * XFERCOMP bit, even with it masked out.  This is a workaround
++		 * for that behavior.  Should fix this when hardware is fixed.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		}
++		handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.stall) {
++		handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) {
++		if (out_nak_enh) {
++			if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
++				DWC_DEBUGPL(DBG_HCD, "XactErr with NYET/NAK/ACK\n");
++				qtd->error_count = 0;
++			} else {
++				DWC_DEBUGPL(DBG_HCD, "XactErr without NYET/NAK/ACK\n");
++			}
++		}
++
++		/*
++		 * Must handle xacterr before nak or ack. Could get a xacterr
++		 * at the same time as either of these on a BULK/CONTROL OUT
++		 * that started with a PING. The xacterr takes precedence.
++		 */
++		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) {
++		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) {
++		handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.bblerr) {
++		handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.frmovrun) {
++		handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.datatglerr) {
++		handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd);
++	} else if (!out_nak_enh) {
++		if (hcint.b.nyet) {
++			/*
++			 * Must handle nyet before nak or ack. Could get a nyet at the
++			 * same time as either of those on a BULK/CONTROL OUT that
++			 * started with a PING. The nyet takes precedence.
++			 */
++			handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.nak && !hcintmsk.b.nak) {
++			/*
++			 * If nak is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the nak is handled by
++			 * the nak interrupt handler, not here. Handle nak here for
++			 * BULK/CONTROL OUT transfers, which halt on a NAK to allow
++			 * rewinding the buffer pointer.
++			 */
++			handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.ack && !hcintmsk.b.ack) {
++			/*
++			 * If ack is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the ack is handled by
++			 * the ack interrupt handler, not here. Handle ack here for
++			 * split transfers. Start splits halt on ACK.
++			 */
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		} else {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				/*
++				 * A periodic transfer halted with no other channel
++				 * interrupts set. Assume it was halted by the core
++				 * because it could not be completed in its scheduled
++				 * (micro)frame.
++				 */
++#ifdef DEBUG
++				DWC_PRINTF
++				    ("%s: Halt channel %d (assume incomplete periodic transfer)\n",
++				     __func__, hc->hc_num);
++#endif
++				halt_channel(hcd, hc, qtd,
++					     DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
++			} else {
++				DWC_ERROR
++				    ("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
++				     "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
++				     __func__, hc->hc_num, hcint.d32,
++				     DWC_READ_REG32(&hcd->
++						    core_if->core_global_regs->
++						    gintsts));
++			}
++
++		}
++	} else {
++		DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n",
++			   hcint.d32);
++	}
++}
++
++/**
++ * Handles a host channel Channel Halted interrupt.
++ *
++ * In slave mode, this handler is called only when the driver specifically
++ * requests a halt. This occurs during handling other host channel interrupts
++ * (e.g. nak, xacterr, stall, nyet, etc.).
++ *
++ * In DMA mode, this is the interrupt that occurs when the core has finished
++ * processing a transfer on a channel. Other host channel interrupts (except
++ * ahberr) are disabled in DMA mode.
++ */
++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd,
++				     dwc_hc_t * hc,
++				     dwc_otg_hc_regs_t * hc_regs,
++				     dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Channel Halted--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_enable) {
++		handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
++	} else {
++#ifdef DEBUG
++		if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
++			return 1;
++		}
++#endif
++		release_channel(hcd, hc, qtd, hc->halt_status);
++	}
++
++	return 1;
++}
++
++/** Handles interrupt for a specific Host Channel */
++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num)
++{
++	int retval = 0;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	dwc_hc_t *hc;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
++
++	hc = dwc_otg_hcd->hc_ptr_array[num];
++	hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
++	qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list);
++
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++	hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
++	DWC_DEBUGPL(DBG_HCDV,
++		    "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
++		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
++	hcint.d32 = hcint.d32 & hcintmsk.d32;
++
++	if (!dwc_otg_hcd->core_if->dma_enable) {
++		if (hcint.b.chhltd && hcint.d32 != 0x2) {
++			hcint.b.chhltd = 0;
++		}
++	}
++
++	if (hcint.b.xfercomp) {
++		retval |=
++		    handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++		/*
++		 * If NYET occurred at same time as Xfer Complete, the NYET is
++		 * handled by the Xfer Complete interrupt handler. Don't want
++		 * to call the NYET interrupt handler in this case.
++		 */
++		hcint.b.nyet = 0;
++	}
++	if (hcint.b.chhltd) {
++		retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.ahberr) {
++		retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.stall) {
++		retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nak) {
++		retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.ack) {
++		if(!hcint.b.chhltd)
++			retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nyet) {
++		retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.xacterr) {
++		retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.bblerr) {
++		retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.frmovrun) {
++		retval |=
++		    handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.datatglerr) {
++		retval |=
++		    handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++
++	return retval;
++}
++#endif /* DWC_DEVICE_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,955 @@
++
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $
++ * $Revision: #20 $
++ * $Date: 2011/10/26 $
++ * $Change: 1872981 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the implementation of the HCD. In Linux, the HCD
++ * implements the hc_driver API.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++#include <asm/io.h>
++#include <asm/fiq.h>
++#include <linux/usb.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)
++#include <../drivers/usb/core/hcd.h>
++#else
++#include <linux/usb/hcd.h>
++#endif
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
++#define USB_URB_EP_LINKING 1
++#else
++#define USB_URB_EP_LINKING 0
++#endif
++
++#include "dwc_otg_hcd_if.h"
++#include "dwc_otg_dbg.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_mphi_fix.h"
++
++/**
++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++						     ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++static const char dwc_otg_hcd_name[] = "dwc_otg_hcd";
++
++extern bool fiq_fix_enable;
++
++/** @name Linux HC Driver API Functions */
++/** @{ */
++/* manage i/o requests, device state */
++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		       struct usb_host_endpoint *ep,
++#endif
++		       struct urb *urb, gfp_t mem_flags);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb);
++#endif
++#else /* kernels at or post 2.6.30 */
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd,
++                               struct urb *urb, int status);
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) */
++
++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
++#endif
++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
++extern int hcd_start(struct usb_hcd *hcd);
++extern void hcd_stop(struct usb_hcd *hcd);
++static int get_frame_number(struct usb_hcd *hcd);
++extern int hub_status_data(struct usb_hcd *hcd, char *buf);
++extern int hub_control(struct usb_hcd *hcd,
++		       u16 typeReq,
++		       u16 wValue, u16 wIndex, char *buf, u16 wLength);
++
++struct wrapper_priv_data {
++	dwc_otg_hcd_t *dwc_otg_hcd;
++};
++
++/** @} */
++
++static struct hc_driver dwc_otg_hc_driver = {
++
++	.description = dwc_otg_hcd_name,
++	.product_desc = "DWC OTG Controller",
++	.hcd_priv_size = sizeof(struct wrapper_priv_data),
++
++	.irq = dwc_otg_hcd_irq,
++
++	.flags = HCD_MEMORY | HCD_USB2,
++
++	//.reset =              
++	.start = hcd_start,
++	//.suspend =            
++	//.resume =             
++	.stop = hcd_stop,
++
++	.urb_enqueue = dwc_otg_urb_enqueue,
++	.urb_dequeue = dwc_otg_urb_dequeue,
++	.endpoint_disable = endpoint_disable,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++	.endpoint_reset = endpoint_reset,
++#endif
++	.get_frame_number = get_frame_number,
++
++	.hub_status_data = hub_status_data,
++	.hub_control = hub_control,
++	//.bus_suspend =                
++	//.bus_resume =         
++};
++
++/** Gets the dwc_otg_hcd from a struct usb_hcd */
++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
++{
++	struct wrapper_priv_data *p;
++	p = (struct wrapper_priv_data *)(hcd->hcd_priv);
++	return p->dwc_otg_hcd;
++}
++
++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	return dwc_otg_hcd_get_priv_data(dwc_otg_hcd);
++}
++
++/** Gets the usb_host_endpoint associated with an URB. */
++inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
++{
++	struct usb_device *dev = urb->dev;
++	int ep_num = usb_pipeendpoint(urb->pipe);
++
++	if (usb_pipein(urb->pipe))
++		return dev->ep_in[ep_num];
++	else
++		return dev->ep_out[ep_num];
++}
++
++static int _disconnect(dwc_otg_hcd_t * hcd)
++{
++	struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
++
++	usb_hcd->self.is_b_host = 0;
++	return 0;
++}
++
++static int _start(dwc_otg_hcd_t * hcd)
++{
++	struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
++
++	usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd);
++	hcd_start(usb_hcd);
++
++	return 0;
++}
++
++static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr,
++		     uint32_t * port_addr)
++{
++   struct urb *urb = (struct urb *)urb_handle;
++   struct usb_bus *bus;
++#if 1 //GRAYG - temporary
++   if (NULL == urb_handle)
++      DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG
++   if (NULL == urb->dev)
++      DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG
++   if (NULL == port_addr)
++      DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG
++#endif
++   if (urb->dev->tt) {
++        if (NULL == urb->dev->tt->hub) {
++                DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n",
++                           __func__); //GRAYG
++                //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG
++                *hub_addr = 0; //GRAYG
++                // we probably shouldn't have a transaction translator if
++                // there's no associated hub?
++        } else {
++		bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd));
++		if (urb->dev->tt->hub == bus->root_hub)
++			*hub_addr = 0;
++		else
++			*hub_addr = urb->dev->tt->hub->devnum;
++	}
++	*port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1;
++   } else {
++        *hub_addr = 0;
++	*port_addr = urb->dev->ttport;
++   }
++   return 0;
++}
++
++static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle)
++{
++	struct urb *urb = (struct urb *)urb_handle;
++	return urb->dev->speed;
++}
++
++static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd)
++{
++	struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
++	return usb_hcd->self.b_hnp_enable;
++}
++
++static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw,
++				   struct urb *urb)
++{
++	hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval;
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		hcd_to_bus(hcd)->bandwidth_isoc_reqs++;
++	} else {
++		hcd_to_bus(hcd)->bandwidth_int_reqs++;
++	}
++}
++
++static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw,
++			       struct urb *urb)
++{
++	hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval;
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		hcd_to_bus(hcd)->bandwidth_isoc_reqs--;
++	} else {
++		hcd_to_bus(hcd)->bandwidth_int_reqs--;
++	}
++}
++
++/**
++ * Sets the final status of an URB and returns it to the device driver. Any
++ * required cleanup of the URB is performed.  The HCD lock should be held on
++ * entry.
++ */
++static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle,
++		     dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status)
++{
++	struct urb *urb = (struct urb *)urb_handle;
++	urb_tq_entry_t *new_entry;
++	int rc = 0;
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n",
++			   __func__, urb, usb_pipedevice(urb->pipe),
++			   usb_pipeendpoint(urb->pipe),
++			   usb_pipein(urb->pipe) ? "IN" : "OUT", status);
++		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++			int i;
++			for (i = 0; i < urb->number_of_packets; i++) {
++				DWC_PRINTF("  ISO Desc %d status: %d\n",
++					   i, urb->iso_frame_desc[i].status);
++			}
++		}
++	}
++	new_entry = DWC_ALLOC_ATOMIC(sizeof(urb_tq_entry_t));
++	urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb);
++	/* Convert status value. */
++	switch (status) {
++	case -DWC_E_PROTOCOL:
++		status = -EPROTO;
++		break;
++	case -DWC_E_IN_PROGRESS:
++		status = -EINPROGRESS;
++		break;
++	case -DWC_E_PIPE:
++		status = -EPIPE;
++		break;
++	case -DWC_E_IO:
++		status = -EIO;
++		break;
++	case -DWC_E_TIMEOUT:
++		status = -ETIMEDOUT;
++		break;
++	case -DWC_E_OVERFLOW:
++		status = -EOVERFLOW;
++		break;
++	default:
++		if (status) {
++			DWC_PRINTF("Uknown urb status %d\n", status);
++
++		}
++	}
++
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++
++		urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb);
++		for (i = 0; i < urb->number_of_packets; ++i) {
++			urb->iso_frame_desc[i].actual_length =
++			    dwc_otg_hcd_urb_get_iso_desc_actual_length
++			    (dwc_otg_urb, i);
++			urb->iso_frame_desc[i].status =
++			    dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i);
++		}
++	}
++
++	urb->status = status;
++	urb->hcpriv = NULL;
++	if (!status) {
++		if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
++		    (urb->actual_length < urb->transfer_buffer_length)) {
++			urb->status = -EREMOTEIO;
++		}
++	}
++
++	if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) ||
++	    (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
++		struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
++		if (ep) {
++			free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd),
++					   dwc_otg_hcd_get_ep_bandwidth(hcd,
++									ep->hcpriv),
++					   urb);
++		}
++	}
++
++	DWC_FREE(dwc_otg_urb);
++	if (!new_entry) {
++		DWC_ERROR("dwc_otg_hcd: complete: cannot allocate URB TQ entry\n");
++		urb->status = -EPROTO;
++		/* don't schedule the tasklet -
++		 * directly return the packet here with error. */
++#if USB_URB_EP_LINKING
++		usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb);
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb);
++#else
++		usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status);
++#endif
++	} else {
++		new_entry->urb = urb;
++#if USB_URB_EP_LINKING
++		rc = usb_hcd_check_unlink_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status);
++		if(0 == rc) {
++			usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb);
++		}
++#endif
++		if(0 == rc) {
++			DWC_TAILQ_INSERT_TAIL(&hcd->completed_urb_list, new_entry,
++						urb_tq_entries);
++			DWC_TASK_HI_SCHEDULE(hcd->completion_tasklet);
++		}
++	}
++	return 0;
++}
++
++static struct dwc_otg_hcd_function_ops hcd_fops = {
++	.start = _start,
++	.disconnect = _disconnect,
++	.hub_info = _hub_info,
++	.speed = _speed,
++	.complete = _complete,
++	.get_b_hnp_enable = _get_b_hnp_enable,
++};
++
++static struct fiq_handler fh = {
++  .name = "usb_fiq",
++};
++static uint8_t fiqStack[1024];
++
++extern mphi_regs_t c_mphi_regs;
++/**
++ * Initializes the HCD. This function allocates memory for and initializes the
++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
++ * USB bus with the core and calls the hc_driver->start() function. It returns
++ * a negative error on failure.
++ */
++int hcd_init(dwc_bus_dev_t *_dev)
++{
++	struct usb_hcd *hcd = NULL;
++	dwc_otg_hcd_t *dwc_otg_hcd = NULL;
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	int retval = 0;
++        u64 dmamask;
++	struct pt_regs regs;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev);
++
++	/* Set device flags indicating whether the HCD supports DMA. */
++	if (dwc_otg_is_dma_enable(otg_dev->core_if))
++                dmamask = DMA_BIT_MASK(32);
++        else
++                dmamask = 0;
++              
++#if    defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
++        dma_set_mask(&_dev->dev, dmamask);
++        dma_set_coherent_mask(&_dev->dev, dmamask);
++#elif  defined(PCI_INTERFACE)
++        pci_set_dma_mask(_dev, dmamask);
++        pci_set_consistent_dma_mask(_dev, dmamask);
++#endif
++
++	if (fiq_fix_enable)
++	{
++		// Set up fiq
++		claim_fiq(&fh);
++		set_fiq_handler(__FIQ_Branch, 4);
++		memset(&regs,0,sizeof(regs));
++		regs.ARM_r8 = (long)dwc_otg_hcd_handle_fiq;
++		regs.ARM_r9 = (long)0;
++		regs.ARM_sp = (long)fiqStack + sizeof(fiqStack) - 4;
++		set_fiq_regs(&regs);
++		}
++
++	/*
++	 * Allocate memory for the base HCD plus the DWC OTG HCD.
++	 * Initialize the base HCD.
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, _dev->dev.bus_id);
++#else
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, dev_name(&_dev->dev));
++	hcd->has_tt = 1;
++//      hcd->uses_new_polling = 1;
++//      hcd->poll_rh = 0;
++#endif
++	if (!hcd) {
++		retval = -ENOMEM;
++		goto error1;
++	}
++
++	hcd->regs = otg_dev->os_dep.base;
++
++	if (fiq_fix_enable)
++	{
++		//Set the mphi periph to  the required registers
++		c_mphi_regs.base    = otg_dev->os_dep.mphi_base;
++		c_mphi_regs.ctrl    = otg_dev->os_dep.mphi_base + 0x4c;
++		c_mphi_regs.outdda  = otg_dev->os_dep.mphi_base + 0x28;
++		c_mphi_regs.outddb  = otg_dev->os_dep.mphi_base + 0x2c;
++		c_mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50;
++
++		//Enable mphi peripheral
++		writel((1<<31),c_mphi_regs.ctrl);
++#ifdef DEBUG
++		if (readl(c_mphi_regs.ctrl) & 0x80000000)
++			DWC_DEBUGPL(DBG_USER, "MPHI periph has been enabled\n");
++		else
++			DWC_DEBUGPL(DBG_USER, "MPHI periph has NOT been enabled\n");
++#endif
++		// Enable FIQ interrupt from USB peripheral
++		enable_fiq(INTERRUPT_VC_USB);
++	}
++	/* Initialize the DWC OTG HCD. */
++	dwc_otg_hcd = dwc_otg_hcd_alloc_hcd();
++	if (!dwc_otg_hcd) {
++		goto error2;
++	}
++	((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd =
++	    dwc_otg_hcd;
++	otg_dev->hcd = dwc_otg_hcd;
++
++	if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) {
++		goto error2;
++	}
++
++	otg_dev->hcd->otg_dev = otg_dev;
++	hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) //version field absent later
++	hcd->self.otg_version = dwc_otg_get_otg_version(otg_dev->core_if);
++#endif
++	/* Don't support SG list at this point */
++	hcd->self.sg_tablesize = 0;
++#endif
++	/*
++	 * Finish generic HCD initialization and start the HCD. This function
++	 * allocates the DMA buffer pool, registers the USB bus, requests the
++	 * IRQ line, and calls hcd_start method.
++	 */
++#ifdef PLATFORM_INTERFACE
++        retval = usb_add_hcd(hcd, platform_get_irq(_dev, 0), IRQF_SHARED | IRQF_DISABLED);
++#else
++        retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED | IRQF_DISABLED);	
++#endif
++	if (retval < 0) {
++		goto error2;
++	}
++
++	dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd);
++	return 0;
++
++error2:
++	usb_put_hcd(hcd);
++error1:
++	return retval;
++}
++
++/**
++ * Removes the HCD.
++ * Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void hcd_remove(dwc_bus_dev_t *_dev)
++{
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	struct usb_hcd *hcd;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev);
++
++	if (!otg_dev) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++		return;
++	}
++
++	dwc_otg_hcd = otg_dev->hcd;
++
++	if (!dwc_otg_hcd) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++		return;
++	}
++
++	hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
++
++	if (!hcd) {
++		DWC_DEBUGPL(DBG_ANY,
++			    "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n",
++			    __func__);
++		return;
++	}
++	usb_remove_hcd(hcd);
++	dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL);
++	dwc_otg_hcd_remove(dwc_otg_hcd);
++	usb_put_hcd(hcd);
++}
++
++/* =========================================================================
++ *  Linux HC Driver Functions
++ * ========================================================================= */
++
++/** Initializes the DWC_otg controller and its root hub and prepares it for host
++ * mode operation. Activates the root port. Returns 0 on success and a negative
++ * error code on failure. */
++int hcd_start(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	struct usb_bus *bus;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
++	bus = hcd_to_bus(hcd);
++
++	hcd->state = HC_STATE_RUNNING;
++	if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) {
++		return 0;
++	}
++
++	/* Initialize and connect root hub if one is not already attached */
++	if (bus->root_hub) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
++		/* Inform the HUB driver to resume. */
++		usb_hcd_resume_root_hub(hcd);
++	}
++
++	return 0;
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void hcd_stop(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	dwc_otg_hcd_stop(dwc_otg_hcd);
++}
++
++/** Returns the current frame number. */
++static int get_frame_number(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	return dwc_otg_hcd_get_frame_number(dwc_otg_hcd);
++}
++
++#ifdef DEBUG
++static void dump_urb_info(struct urb *urb, char *fn_name)
++{
++	DWC_PRINTF("%s, urb %p\n", fn_name, urb);
++	DWC_PRINTF("  Device address: %d\n", usb_pipedevice(urb->pipe));
++	DWC_PRINTF("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++		   (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++	DWC_PRINTF("  Endpoint type: %s\n", ( {
++					     char *pipetype;
++					     switch (usb_pipetype(urb->pipe)) {
++case PIPE_CONTROL:
++pipetype = "CONTROL"; break; case PIPE_BULK:
++pipetype = "BULK"; break; case PIPE_INTERRUPT:
++pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS:
++pipetype = "ISOCHRONOUS"; break; default:
++					     pipetype = "UNKNOWN"; break;};
++					     pipetype;}
++		   )) ;
++	DWC_PRINTF("  Speed: %s\n", ( {
++				     char *speed; switch (urb->dev->speed) {
++case USB_SPEED_HIGH:
++speed = "HIGH"; break; case USB_SPEED_FULL:
++speed = "FULL"; break; case USB_SPEED_LOW:
++speed = "LOW"; break; default:
++				     speed = "UNKNOWN"; break;};
++				     speed;}
++		   )) ;
++	DWC_PRINTF("  Max packet size: %d\n",
++		   usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++	DWC_PRINTF("  Data buffer length: %d\n", urb->transfer_buffer_length);
++	DWC_PRINTF("  Transfer buffer: %p, Transfer DMA: %p\n",
++		   urb->transfer_buffer, (void *)urb->transfer_dma);
++	DWC_PRINTF("  Setup buffer: %p, Setup DMA: %p\n",
++		   urb->setup_packet, (void *)urb->setup_dma);
++	DWC_PRINTF("  Interval: %d\n", urb->interval);
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++		for (i = 0; i < urb->number_of_packets; i++) {
++			DWC_PRINTF("  ISO Desc %d:\n", i);
++			DWC_PRINTF("    offset: %d, length %d\n",
++				   urb->iso_frame_desc[i].offset,
++				   urb->iso_frame_desc[i].length);
++		}
++	}
++}
++#endif
++
++/** Starts processing a USB transfer request specified by a USB Request Block
++ * (URB). mem_flags indicates the type of memory allocation to use while
++ * processing this URB. */
++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		       struct usb_host_endpoint *ep,
++#endif
++		       struct urb *urb, gfp_t mem_flags)
++{
++	int retval = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
++	struct usb_host_endpoint *ep = urb->ep;
++#endif
++#if USB_URB_EP_LINKING
++      	dwc_irqflags_t irqflags;
++#endif
++        void **ref_ep_hcpriv = &ep->hcpriv;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_hcd_urb_t *dwc_otg_urb;
++	int i;
++	int alloc_bandwidth = 0;
++	uint8_t ep_type = 0;
++	uint32_t flags = 0;
++	void *buf;
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_urb_enqueue");
++	}
++#endif
++
++	if (!urb->transfer_buffer && urb->transfer_buffer_length)
++		return -EINVAL;
++
++	if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
++	    || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
++		if (!dwc_otg_hcd_is_bandwidth_allocated
++		    (dwc_otg_hcd, ref_ep_hcpriv)) {
++			alloc_bandwidth = 1;
++		}
++	}
++
++	switch (usb_pipetype(urb->pipe)) {
++	case PIPE_CONTROL:
++		ep_type = USB_ENDPOINT_XFER_CONTROL;
++		break;
++	case PIPE_ISOCHRONOUS:
++		ep_type = USB_ENDPOINT_XFER_ISOC;
++		break;
++	case PIPE_BULK:
++		ep_type = USB_ENDPOINT_XFER_BULK;
++		break;
++	case PIPE_INTERRUPT:
++		ep_type = USB_ENDPOINT_XFER_INT;
++		break;
++	default:
++                DWC_WARN("Wrong EP type - %d\n", usb_pipetype(urb->pipe));
++	}
++
++        /* # of packets is often 0 - do we really need to call this then? */
++	dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd,
++					    urb->number_of_packets,
++					    mem_flags == GFP_ATOMIC ? 1 : 0);
++
++	if(dwc_otg_urb == NULL)
++		return -ENOMEM;
++
++        urb->hcpriv = dwc_otg_urb;
++        if (!dwc_otg_urb && urb->number_of_packets)
++                return -ENOMEM;
++        
++	dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe),
++				     usb_pipeendpoint(urb->pipe), ep_type,
++				     usb_pipein(urb->pipe),
++				     usb_maxpacket(urb->dev, urb->pipe,
++						   !(usb_pipein(urb->pipe))));
++
++	buf = urb->transfer_buffer;
++	if (hcd->self.uses_dma) {
++		/*
++		 * Calculate virtual address from physical address,
++		 * because some class driver may not fill transfer_buffer.
++		 * In Buffer DMA mode virual address is used,
++		 * when handling non DWORD aligned buffers.
++		 */
++		//buf = phys_to_virt(urb->transfer_dma);
++                // DMA addresses are bus addresses not physical addresses!
++                buf = dma_to_virt(&urb->dev->dev, urb->transfer_dma);
++	}
++
++	if (!(urb->transfer_flags & URB_NO_INTERRUPT))
++		flags |= URB_GIVEBACK_ASAP;
++	if (urb->transfer_flags & URB_ZERO_PACKET)
++		flags |= URB_SEND_ZERO_PACKET;
++
++	dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf,
++				   urb->transfer_dma,
++				   urb->transfer_buffer_length,
++				   urb->setup_packet,
++				   urb->setup_dma, flags, urb->interval);
++
++	for (i = 0; i < urb->number_of_packets; ++i) {
++		dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i,
++						    urb->
++						    iso_frame_desc[i].offset,
++						    urb->
++						    iso_frame_desc[i].length);
++	}
++
++#if USB_URB_EP_LINKING
++        DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags);
++	retval = usb_hcd_link_urb_to_ep(hcd, urb);
++        DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags);
++	if (0 == retval) 
++#endif
++        {
++                retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb,
++                                                 /*(dwc_otg_qh_t **)*/
++                                                 ref_ep_hcpriv, 
++                                                 mem_flags == GFP_ATOMIC ? 1 : 0);
++                if (0 == retval) {
++                        if (alloc_bandwidth) {
++                                allocate_bus_bandwidth(hcd,
++                                        dwc_otg_hcd_get_ep_bandwidth(
++                                                dwc_otg_hcd, *ref_ep_hcpriv),
++                                                       urb);
++                        }
++                } else {
++#if USB_URB_EP_LINKING
++                	dwc_irqflags_t irqflags;
++                        DWC_DEBUGPL(DBG_HCD, "DWC OTG dwc_otg_hcd_urb_enqueue failed rc %d\n", retval);
++                        DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags);
++                        usb_hcd_unlink_urb_from_ep(hcd, urb);
++                        DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags);
++#endif
++                        if (retval == -DWC_E_NO_DEVICE) {
++                                retval = -ENODEV;
++                        }
++                }
++        }
++	return retval;
++}
++
++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ * success.  */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
++#else
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
++#endif
++{
++	dwc_irqflags_t flags;
++	dwc_otg_hcd_t *dwc_otg_hcd;
++        int rc;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
++
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_urb_dequeue");
++	}
++#endif
++
++	DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
++	if (0 == rc) {
++		if(urb->hcpriv != NULL) {
++	                dwc_otg_hcd_urb_dequeue(dwc_otg_hcd,
++    	                                    (dwc_otg_hcd_urb_t *)urb->hcpriv);
++
++        	        DWC_FREE(urb->hcpriv);
++            		urb->hcpriv = NULL;
++            	}
++        }
++
++        if (0 == rc) {
++        	/* Higher layer software sets URB status. */
++#if USB_URB_EP_LINKING
++                usb_hcd_unlink_urb_from_ep(hcd, urb);
++#endif
++        	DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++                usb_hcd_giveback_urb(hcd, urb);
++#else
++                usb_hcd_giveback_urb(hcd, urb, status);
++#endif
++                if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++                        DWC_PRINTF("Called usb_hcd_giveback_urb() \n");
++                        DWC_PRINTF("  1urb->status = %d\n", urb->status);
++                }
++                DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue OK\n");
++        } else {
++        	DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++                DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue failed - rc %d\n",
++                            rc);
++        }
++           
++	return rc;
++}
++
++/* Frees resources in the DWC_otg controller related to a given endpoint. Also
++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ * must already be dequeued. */
++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	DWC_DEBUGPL(DBG_HCD,
++		    "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++		    "endpoint=%d\n", ep->desc.bEndpointAddress,
++		    dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
++	dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250);
++	ep->hcpriv = NULL;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++/* Resets endpoint specific parameter values, in current version used to reset 
++ * the data toggle(as a WA). This function can be called from usb_clear_halt routine */
++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
++{
++	dwc_irqflags_t flags;
++	struct usb_device *udev = NULL;
++	int epnum = usb_endpoint_num(&ep->desc);
++	int is_out = usb_endpoint_dir_out(&ep->desc);
++	int is_control = usb_endpoint_xfer_control(&ep->desc);
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++        struct device *dev = DWC_OTG_OS_GETDEV(dwc_otg_hcd->otg_dev->os_dep);
++
++	if (dev)
++		udev = to_usb_device(dev);
++	else
++		return;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP RESET: Endpoint Num=0x%02d\n", epnum);
++
++	DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++	usb_settoggle(udev, epnum, is_out, 0);
++	if (is_control)
++		usb_settoggle(udev, epnum, !is_out, 0);
++
++	if (ep->hcpriv) {
++		dwc_otg_hcd_endpoint_reset(dwc_otg_hcd, ep->hcpriv);
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++}
++#endif
++
++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs */
++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd);
++	if (retval != 0) {
++		S3C2410X_CLEAR_EINTPEND();
++	}
++	return IRQ_RETVAL(retval);
++}
++
++/** Creates Status Change bitmap for the root hub and root port. The bitmap is
++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ * is the status change indicator for the single root port. Returns 1 if either
++ * change indicator is 1, otherwise returns 0. */
++int hub_status_data(struct usb_hcd *hcd, char *buf)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	buf[0] = 0;
++	buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1;
++
++	return (buf[0] != 0);
++}
++
++/** Handles hub class-specific requests. */
++int hub_control(struct usb_hcd *hcd,
++		u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
++{
++	int retval;
++
++	retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd),
++					 typeReq, wValue, wIndex, buf, wLength);
++
++	switch (retval) {
++	case -DWC_E_INVALID:
++		retval = -EINVAL;
++		break;
++	}
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,958 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $
++ * $Revision: #44 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ * 
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ * 
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the functions to manage Queue Heads and Queue
++ * Transfer Descriptors.
++ */
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++extern bool microframe_schedule;
++
++/** 
++ * Free each QTD in the QH's QTD-list then free the QH.  QH should already be
++ * removed from a list.  QTD list should already be empty if called from URB
++ * Dequeue.
++ *
++ * @param hcd HCD instance.
++ * @param qh The QH to free.
++ */
++void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++
++	/* Free each QTD in the QTD list */
++	DWC_SPINLOCK(hcd->lock);
++	DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
++		DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry);
++		dwc_otg_hcd_qtd_free(qtd);
++	}
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_qh_free_ddma(hcd, qh);
++	} else if (qh->dw_align_buf) {
++		uint32_t buf_size;
++		if (qh->ep_type == UE_ISOCHRONOUS) {
++			buf_size = 4096;
++		} else {
++			buf_size = hcd->core_if->core_params->max_transfer_size;
++		}
++		DWC_DMA_FREE(buf_size, qh->dw_align_buf, qh->dw_align_buf_dma);
++	}
++
++	DWC_FREE(qh);
++	DWC_SPINUNLOCK(hcd->lock);
++	return;
++}
++
++#define BitStuffTime(bytecount)  ((8 * 7* bytecount) / 6)
++#define HS_HOST_DELAY		5	/* nanoseconds */
++#define FS_LS_HOST_DELAY	1000	/* nanoseconds */
++#define HUB_LS_SETUP		333	/* nanoseconds */
++#define NS_TO_US(ns)		((ns + 500) / 1000)
++				/* convert & round nanoseconds to microseconds */
++
++static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, int bytecount)
++{
++	unsigned long retval;
++
++	switch (speed) {
++	case USB_SPEED_HIGH:
++		if (is_isoc) {
++			retval =
++			    ((38 * 8 * 2083) +
++			     (2083 * (3 + BitStuffTime(bytecount)))) / 1000 +
++			    HS_HOST_DELAY;
++		} else {
++			retval =
++			    ((55 * 8 * 2083) +
++			     (2083 * (3 + BitStuffTime(bytecount)))) / 1000 +
++			    HS_HOST_DELAY;
++		}
++		break;
++	case USB_SPEED_FULL:
++		if (is_isoc) {
++			retval =
++			    (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000;
++			if (is_in) {
++				retval = 7268 + FS_LS_HOST_DELAY + retval;
++			} else {
++				retval = 6265 + FS_LS_HOST_DELAY + retval;
++			}
++		} else {
++			retval =
++			    (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000;
++			retval = 9107 + FS_LS_HOST_DELAY + retval;
++		}
++		break;
++	case USB_SPEED_LOW:
++		if (is_in) {
++			retval =
++			    (67667 * (31 + 10 * BitStuffTime(bytecount))) /
++			    1000;
++			retval =
++			    64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY +
++			    retval;
++		} else {
++			retval =
++			    (66700 * (31 + 10 * BitStuffTime(bytecount))) /
++			    1000;
++			retval =
++			    64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY +
++			    retval;
++		}
++		break;
++	default:
++		DWC_WARN("Unknown device speed\n");
++		retval = -1;
++	}
++
++	return NS_TO_US(retval);
++}
++
++/** 
++ * Initializes a QH structure.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh  The QH to init.
++ * @param urb Holds the information about the device/endpoint that we need
++ * 	      to initialize the QH. 
++ */
++#define SCHEDULE_SLOP 10
++void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, dwc_otg_hcd_urb_t * urb)
++{
++	char *speed, *type;
++	int dev_speed;
++	uint32_t hub_addr, hub_port;
++
++	dwc_memset(qh, 0, sizeof(dwc_otg_qh_t));
++
++	/* Initialize QH */
++	qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
++	qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
++
++	qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info);
++	DWC_CIRCLEQ_INIT(&qh->qtd_list);
++	DWC_LIST_INIT(&qh->qh_list_entry);
++	qh->channel = NULL;
++
++	/* FS/LS Enpoint on HS Hub 
++	 * NOT virtual root hub */
++	dev_speed = hcd->fops->speed(hcd, urb->priv);
++
++	hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port);
++	qh->do_split = 0;
++	if (microframe_schedule)
++		qh->speed = dev_speed;
++
++	qh->nak_frame = 0xffff;
++
++	if (((dev_speed == USB_SPEED_LOW) ||
++	     (dev_speed == USB_SPEED_FULL)) &&
++	    (hub_addr != 0 && hub_addr != 1)) {
++		DWC_DEBUGPL(DBG_HCD,
++			    "QH init: EP %d: TT found at hub addr %d, for port %d\n",
++			    dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr,
++			    hub_port);
++		qh->do_split = 1;
++	}
++
++	if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) {
++		/* Compute scheduling parameters once and save them. */
++		hprt0_data_t hprt;
++
++		/** @todo Account for split transfers in the bus time. */
++		int bytecount =
++		    dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
++
++		qh->usecs =
++		    calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed),
++				  qh->ep_is_in, (qh->ep_type == UE_ISOCHRONOUS),
++				  bytecount);
++		/* Start in a slightly future (micro)frame. */
++		qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
++						    SCHEDULE_SLOP);
++		qh->interval = urb->interval;
++
++#if 0
++		/* Increase interrupt polling rate for debugging. */
++		if (qh->ep_type == UE_INTERRUPT) {
++			qh->interval = 8;
++		}
++#endif
++		hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0);
++		if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
++		    ((dev_speed == USB_SPEED_LOW) ||
++		     (dev_speed == USB_SPEED_FULL))) {
++			qh->interval *= 8;
++			qh->sched_frame |= 0x7;
++			qh->start_split_frame = qh->sched_frame;
++		}
++
++	}
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - qh = %p\n", qh);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Device Address = %d\n",
++		    dwc_otg_hcd_get_dev_addr(&urb->pipe_info));
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Endpoint %d, %s\n",
++		    dwc_otg_hcd_get_ep_num(&urb->pipe_info),
++		    dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
++	switch (dev_speed) {
++	case USB_SPEED_LOW:
++		qh->dev_speed = DWC_OTG_EP_SPEED_LOW;
++		speed = "low";
++		break;
++	case USB_SPEED_FULL:
++		qh->dev_speed = DWC_OTG_EP_SPEED_FULL;
++		speed = "full";
++		break;
++	case USB_SPEED_HIGH:
++		qh->dev_speed = DWC_OTG_EP_SPEED_HIGH;
++		speed = "high";
++		break;
++	default:
++		speed = "?";
++		break;
++	}
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Speed = %s\n", speed);
++
++	switch (qh->ep_type) {
++	case UE_ISOCHRONOUS:
++		type = "isochronous";
++		break;
++	case UE_INTERRUPT:
++		type = "interrupt";
++		break;
++	case UE_CONTROL:
++		type = "control";
++		break;
++	case UE_BULK:
++		type = "bulk";
++		break;
++	default:
++		type = "?";
++		break;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Type = %s\n", type);
++
++#ifdef DEBUG
++	if (qh->ep_type == UE_INTERRUPT) {
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
++			    qh->usecs);
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
++			    qh->interval);
++	}
++#endif
++
++}
++
++/**
++ * This function allocates and initializes a QH.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param urb Holds the information about the device/endpoint that we need
++ * 	      to initialize the QH.
++ * @param atomic_alloc Flag to do atomic allocation if needed
++ *
++ * @return Returns pointer to the newly allocated QH, or NULL on error. */
++dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd,
++				    dwc_otg_hcd_urb_t * urb, int atomic_alloc)
++{
++	dwc_otg_qh_t *qh;
++
++	/* Allocate memory */
++	/** @todo add memflags argument */
++	qh = dwc_otg_hcd_qh_alloc(atomic_alloc);
++	if (qh == NULL) {
++		DWC_ERROR("qh allocation failed");
++		return NULL;
++	}
++
++	qh_init(hcd, qh, urb);
++
++	if (hcd->core_if->dma_desc_enable
++	    && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) {
++		dwc_otg_hcd_qh_free(hcd, qh);
++		return NULL;
++	}
++
++	return qh;
++}
++
++/* microframe_schedule=0 start */
++
++/**
++ * Checks that a channel is available for a periodic transfer.
++ *
++ * @return 0 if successful, negative error code otherise.
++ */
++static int periodic_channel_available(dwc_otg_hcd_t * hcd)
++{
++	/*
++	 * Currently assuming that there is a dedicated host channnel for each
++	 * periodic transaction plus at least one host channel for
++	 * non-periodic transactions.
++	 */
++	int status;
++	int num_channels;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels)
++	    && (hcd->periodic_channels < num_channels - 1)) {
++		status = 0;
++	} else {
++		DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
++			__func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels);	//NOTICE
++		status = -DWC_E_NO_SPACE;
++	}
++
++	return status;
++}
++
++/**
++ * Checks that there is sufficient bandwidth for the specified QH in the
++ * periodic schedule. For simplicity, this calculation assumes that all the
++ * transfers in the periodic schedule may occur in the same (micro)frame.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH containing periodic bandwidth required.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status;
++	int16_t max_claimed_usecs;
++
++	status = 0;
++
++	if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) {
++		/*
++		 * High speed mode.
++		 * Max periodic usecs is 80% x 125 usec = 100 usec.
++		 */
++
++		max_claimed_usecs = 100 - qh->usecs;
++	} else {
++		/*
++		 * Full speed mode.
++		 * Max periodic usecs is 90% x 1000 usec = 900 usec.
++		 */
++		max_claimed_usecs = 900 - qh->usecs;
++	}
++
++	if (hcd->periodic_usecs > max_claimed_usecs) {
++		DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs);	//NOTICE
++		status = -DWC_E_NO_SPACE;
++	}
++
++	return status;
++}
++
++/* microframe_schedule=0 end */
++
++/**
++ * Microframe scheduler
++ * track the total use in hcd->frame_usecs
++ * keep each qh use in qh->frame_usecs
++ * when surrendering the qh then donate the time back
++ */
++const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 };
++
++/*
++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init
++ */
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd)
++{
++	int i;
++	for (i=0; i<8; i++) {
++		_hcd->frame_usecs[i] = max_uframe_usecs[i];
++	}
++	return 0;
++}
++
++static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++	while (done == 0) {
++		/* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */
++		if (utime <= _hcd->frame_usecs[i]) {
++			_hcd->frame_usecs[i] -= utime;
++			_qh->frame_usecs[i] += utime;
++			t_left -= utime;
++			ret = i;
++			done = 1;
++			return ret;
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++ }
++
++/*
++ * use this for FS apps that can span multiple uframes
++  */
++static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	int j;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++	unsigned short xtime;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++loop:
++	while (done == 0) {
++		if(_hcd->frame_usecs[i] <= 0) {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++			goto loop;
++		}
++
++		/*
++		 * we need n consecutive slots
++		 * so use j as a start slot j plus j+1 must be enough time (for now)
++		 */
++		xtime= _hcd->frame_usecs[i];
++		for (j = i+1 ; j < 8 ; j++ ) {
++                       /*
++                        * if we add this frame remaining time to xtime we may
++                        * be OK, if not we need to test j for a complete frame
++                        */
++                       if ((xtime+_hcd->frame_usecs[j]) < utime) {
++                               if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) {
++                                       j = 8;
++                                       ret = -1;
++                                       continue;
++                               }
++                       }
++                       if (xtime >= utime) {
++                               ret = i;
++                               j = 8;  /* stop loop with a good value ret */
++                               continue;
++                       }
++                       /* add the frame time to x time */
++                       xtime += _hcd->frame_usecs[j];
++		       /* we must have a fully available next frame or break */
++		       if ((xtime < utime)
++				       && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) {
++			       ret = -1;
++			       j = 8;  /* stop loop with a bad value ret */
++			       continue;
++		       }
++		}
++		if (ret >= 0) {
++			t_left = utime;
++			for (j = i; (t_left>0) && (j < 8); j++ ) {
++				t_left -= _hcd->frame_usecs[j];
++				if ( t_left <= 0 ) {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left;
++					_hcd->frame_usecs[j]= -t_left;
++					ret = i;
++					done = 1;
++				} else {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j];
++					_hcd->frame_usecs[j] = 0;
++				}
++			}
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++}
++
++static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int ret;
++	ret = -1;
++
++	if (_qh->speed == USB_SPEED_HIGH) {
++		/* if this is a hs transaction we need a full frame */
++		ret = find_single_uframe(_hcd, _qh);
++	} else {
++		/* if this is a fs transaction we may need a sequence of frames */
++		ret = find_multi_uframe(_hcd, _qh);
++	}
++	return ret;
++}
++
++/**
++ * Checks that the max transfer size allowed in a host channel is large enough
++ * to handle the maximum data transfer in a single (micro)frame for a periodic
++ * transfer.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for a periodic endpoint.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status;
++	uint32_t max_xfer_size;
++	uint32_t max_channel_xfer_size;
++
++	status = 0;
++
++	max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
++	max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
++
++	if (max_xfer_size > max_channel_xfer_size) {
++		DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n",
++				__func__, max_xfer_size, max_channel_xfer_size);	//NOTICE
++		status = -DWC_E_NO_SPACE;
++	}
++
++	return status;
++}
++
++
++extern int g_next_sched_frame, g_np_count, g_np_sent;
++
++/**
++ * Schedules an interrupt or isochronous transfer in the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer. The QH should already contain the
++ * scheduling information.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status = 0;
++
++	if (microframe_schedule) {
++		int frame;
++		status = find_uframe(hcd, qh);
++		frame = -1;
++		if (status == 0) {
++			frame = 7;
++		} else {
++			if (status > 0 )
++				frame = status-1;
++		}
++
++		/* Set the new frame up */
++		if (frame > -1) {
++			qh->sched_frame &= ~0x7;
++			qh->sched_frame |= (frame & 7);
++		}
++
++		if (status != -1)
++			status = 0;
++	} else {
++		status = periodic_channel_available(hcd);
++		if (status) {
++			DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__);	//NOTICE
++			return status;
++		}
++
++		status = check_periodic_bandwidth(hcd, qh);
++	}
++	if (status) {
++		DWC_INFO("%s: Insufficient periodic bandwidth for "
++			    "periodic transfer.\n", __func__);
++		return status;
++	}
++	status = check_max_xfer_size(hcd, qh);
++	if (status) {
++		DWC_INFO("%s: Channel max transfer size too small "
++			    "for periodic transfer.\n", __func__);
++		return status;
++	}
++
++	if (hcd->core_if->dma_desc_enable) {
++		/* Don't rely on SOF and start in ready schedule */
++		DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry);
++	}
++	else {
++		if(DWC_LIST_EMPTY(&hcd->periodic_sched_inactive) || dwc_frame_num_le(qh->sched_frame, g_next_sched_frame))
++		{
++			g_next_sched_frame = qh->sched_frame;
++
++		}
++		/* Always start in the inactive schedule. */
++		DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry);
++	}
++
++	if (!microframe_schedule) {
++		/* Reserve the periodic channel. */
++		hcd->periodic_channels++;
++	}
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs += qh->usecs;
++
++	return status;
++}
++
++
++/**
++ * This function adds a QH to either the non periodic or periodic schedule if
++ * it is not already in the schedule. If the QH is already in the schedule, no
++ * action is taken.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status = 0;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++		/* QH already in a schedule. */
++		return status;
++	}
++
++	/* Add the new QH to the appropriate schedule */
++	if (dwc_qh_is_non_per(qh)) {
++		/* Always start in the inactive schedule. */
++		DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive,
++				     &qh->qh_list_entry);
++		g_np_count++;
++	} else {
++		status = schedule_periodic(hcd, qh);
++		if ( !hcd->periodic_qh_count ) {
++			intr_mask.b.sofintr = 1;
++			DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk,
++								intr_mask.d32, intr_mask.d32);
++		}
++		hcd->periodic_qh_count++;
++	}
++
++	return status;
++}
++
++/**
++ * Removes an interrupt or isochronous transfer from the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer.
++ */
++static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int i;
++	DWC_LIST_REMOVE_INIT(&qh->qh_list_entry);
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs -= qh->usecs;
++
++	if (!microframe_schedule) {
++		/* Release the periodic channel reservation. */
++		hcd->periodic_channels--;
++	} else {
++		for (i = 0; i < 8; i++) {
++			hcd->frame_usecs[i] += qh->frame_usecs[i];
++			qh->frame_usecs[i] = 0;
++		}
++	}
++}
++
++/** 
++ * Removes a QH from either the non-periodic or periodic schedule.  Memory is
++ * not freed.
++ *
++ * @param hcd The HCD state structure.
++ * @param qh QH to remove from schedule. */
++void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	if (DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++		/* QH is not in a schedule. */
++		return;
++	}
++
++	if (dwc_qh_is_non_per(qh)) {
++		if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
++			hcd->non_periodic_qh_ptr =
++			    hcd->non_periodic_qh_ptr->next;
++		}
++		DWC_LIST_REMOVE_INIT(&qh->qh_list_entry);
++	} else {
++		deschedule_periodic(hcd, qh);
++		hcd->periodic_qh_count--;
++		if( !hcd->periodic_qh_count ) {
++			intr_mask.b.sofintr = 1;
++				DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk,
++									intr_mask.d32, 0);
++		}
++	}
++}
++
++/**
++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the inactive non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ *
++ * For periodic QHs, the QH is removed from the periodic queued schedule. If
++ * there are any QTDs still attached to the QH, the QH is added to either the
++ * periodic inactive schedule or the periodic ready schedule and its next
++ * scheduled frame is calculated. The QH is placed in the ready schedule if
++ * the scheduled frame has been reached already. Otherwise it's placed in the
++ * inactive schedule. If there are no QTDs attached to the QH, the QH is
++ * completely removed from the periodic schedule.
++ */
++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++			       int sched_next_periodic_split)
++{	
++	if (dwc_qh_is_non_per(qh)) {
++
++	dwc_otg_qh_t *qh_tmp;
++	dwc_list_link_t *qh_list;
++	DWC_LIST_FOREACH(qh_list, &hcd->non_periodic_sched_inactive)
++	{
++		qh_tmp = DWC_LIST_ENTRY(qh_list, struct dwc_otg_qh, qh_list_entry);
++		if(qh_tmp == qh)
++		{
++			/*
++			 *  FIQ is being disabled because this one nevers gets a np_count increment
++			 *  This is still not absolutely correct, but it should fix itself with
++			 *  just an unnecessary extra interrupt
++			 */
++			g_np_sent = g_np_count;
++		}
++	}
++
++
++		dwc_otg_hcd_qh_remove(hcd, qh);
++		if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule. */
++			dwc_otg_hcd_qh_add(hcd, qh);
++		}
++	} else {
++		uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd);
++
++		if (qh->do_split) {
++			/* Schedule the next continuing periodic split transfer */
++			if (sched_next_periodic_split) {
++
++				qh->sched_frame = frame_number;
++
++				if (dwc_frame_num_le(frame_number,
++						     dwc_frame_num_inc
++						     (qh->start_split_frame,
++						      1))) {
++					/*
++					 * Allow one frame to elapse after start
++					 * split microframe before scheduling
++					 * complete split, but DONT if we are
++					 * doing the next start split in the
++					 * same frame for an ISOC out.
++					 */
++					if ((qh->ep_type != UE_ISOCHRONOUS) ||
++					    (qh->ep_is_in != 0)) {
++						qh->sched_frame =
++						    dwc_frame_num_inc(qh->sched_frame, 1);
++					}
++				}
++			} else {
++				qh->sched_frame =
++				    dwc_frame_num_inc(qh->start_split_frame,
++						      qh->interval);
++				if (dwc_frame_num_le
++				    (qh->sched_frame, frame_number)) {
++					qh->sched_frame = frame_number;
++				}
++				qh->sched_frame |= 0x7;
++				qh->start_split_frame = qh->sched_frame;
++			}
++		} else {
++			qh->sched_frame =
++			    dwc_frame_num_inc(qh->sched_frame, qh->interval);
++			if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++				qh->sched_frame = frame_number;
++			}
++		}
++
++		if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		} else {
++			/*
++			 * Remove from periodic_sched_queued and move to
++			 * appropriate queue.
++			 */
++			if ((microframe_schedule && dwc_frame_num_le(qh->sched_frame, frame_number)) ||
++			(!microframe_schedule && qh->sched_frame == frame_number)) {
++				DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready,
++						   &qh->qh_list_entry);
++			} else {
++				if(!dwc_frame_num_le(g_next_sched_frame, qh->sched_frame))
++				{
++					g_next_sched_frame = qh->sched_frame;
++				}
++
++				DWC_LIST_MOVE_HEAD
++				    (&hcd->periodic_sched_inactive,
++				     &qh->qh_list_entry);
++			}
++		}
++	}
++}
++
++/** 
++ * This function allocates and initializes a QTD. 
++ *
++ * @param urb The URB to create a QTD from.  Each URB-QTD pair will end up
++ * 	      pointing to each other so each pair should have a unique correlation.
++ * @param atomic_alloc Flag to do atomic alloc if needed
++ *
++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, int atomic_alloc)
++{
++	dwc_otg_qtd_t *qtd;
++
++	qtd = dwc_otg_hcd_qtd_alloc(atomic_alloc);
++	if (qtd == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qtd_init(qtd, urb);
++	return qtd;
++}
++
++/** 
++ * Initializes a QTD structure.
++ *
++ * @param qtd The QTD to initialize.
++ * @param urb The URB to use for initialization.  */
++void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb)
++{
++	dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t));
++	qtd->urb = urb;
++	if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) {
++		/*
++		 * The only time the QTD data toggle is used is on the data
++		 * phase of control transfers. This phase always starts with
++		 * DATA1.
++		 */
++		qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		qtd->control_phase = DWC_OTG_CONTROL_SETUP;
++	}
++
++	/* start split */
++	qtd->complete_split = 0;
++	qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++	qtd->isoc_split_offset = 0;
++	qtd->in_process = 0;
++
++	/* Store the qtd ptr in the urb to reference what QTD. */
++	urb->qtd = qtd;
++	return;
++}
++
++/**
++ * This function adds a QTD to the QTD-list of a QH.  It will find the correct
++ * QH to place the QTD into.  If it does not find a QH, then it will create a
++ * new QH. If the QH to which the QTD is added is not currently scheduled, it
++ * is placed into the proper schedule based on its EP type.
++ *
++ * @param[in] qtd The QTD to add
++ * @param[in] hcd The DWC HCD structure
++ * @param[out] qh out parameter to return queue head
++ * @param atomic_alloc Flag to do atomic alloc if needed
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd,
++			dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh, int atomic_alloc)
++{
++	int retval = 0;
++	dwc_irqflags_t flags;
++
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++
++	/*
++	 * Get the QH which holds the QTD-list to insert to. Create QH if it
++	 * doesn't exist.
++	 */
++	if (*qh == NULL) {
++		*qh = dwc_otg_hcd_qh_create(hcd, urb, atomic_alloc);
++		if (*qh == NULL) {
++			retval = -DWC_E_NO_MEMORY;
++			goto done;
++		}
++	}
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	retval = dwc_otg_hcd_qh_add(hcd, *qh);
++	if (retval == 0) {
++		DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd,
++					qtd_list_entry);
++		qtd->qh = *qh;
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++
++done:
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,113 @@
++#include "dwc_otg_regs.h"
++#include "dwc_otg_dbg.h"
++
++void dwc_debug_print_core_int_reg(gintsts_data_t gintsts, const char* function_name)
++{
++	DWC_DEBUGPL(DBG_USER,   "*** Debugging from within the %s  function: ***\n"
++				"curmode:     %1i    Modemismatch: %1i    otgintr:    %1i    sofintr:    %1i\n"
++				"rxstsqlvl:   %1i    nptxfempty  : %1i    ginnakeff:  %1i    goutnakeff: %1i\n"
++				"ulpickint:   %1i    i2cintr:      %1i    erlysuspend:%1i    usbsuspend: %1i\n"
++				"usbreset:    %1i    enumdone:     %1i    isooutdrop: %1i    eopframe:   %1i\n"
++				"restoredone: %1i    epmismatch:   %1i    inepint:    %1i    outepintr:  %1i\n"
++				"incomplisoin:%1i    incomplisoout:%1i    fetsusp:    %1i    resetdet:   %1i\n"
++				"portintr:    %1i    hcintr:       %1i    ptxfempty:  %1i    lpmtranrcvd:%1i\n"
++				"conidstschng:%1i    disconnect:   %1i    sessreqintr:%1i    wkupintr:   %1i\n",
++				function_name,
++				gintsts.b.curmode,
++				gintsts.b.modemismatch,
++				gintsts.b.otgintr,
++				gintsts.b.sofintr,
++				gintsts.b.rxstsqlvl,
++				gintsts.b.nptxfempty,
++				gintsts.b.ginnakeff,
++				gintsts.b.goutnakeff,
++				gintsts.b.ulpickint,
++				gintsts.b.i2cintr,
++				gintsts.b.erlysuspend,
++				gintsts.b.usbsuspend,
++				gintsts.b.usbreset,
++				gintsts.b.enumdone,
++				gintsts.b.isooutdrop,
++				gintsts.b.eopframe,
++				gintsts.b.restoredone,
++				gintsts.b.epmismatch,
++				gintsts.b.inepint,
++				gintsts.b.outepintr,
++				gintsts.b.incomplisoin,
++				gintsts.b.incomplisoout,
++				gintsts.b.fetsusp,
++				gintsts.b.resetdet,
++				gintsts.b.portintr,
++				gintsts.b.hcintr,
++				gintsts.b.ptxfempty,
++				gintsts.b.lpmtranrcvd,
++				gintsts.b.conidstschng,
++				gintsts.b.disconnect,
++				gintsts.b.sessreqintr,
++				gintsts.b.wkupintr);
++	return;
++}
++
++void dwc_debug_core_int_mask(gintmsk_data_t gintmsk, const char* function_name)
++{
++	DWC_DEBUGPL(DBG_USER,	"Interrupt Mask status (called from %s) :\n"
++				"modemismatch: %1i     otgintr:    %1i    sofintr:    %1i    rxstsqlvl:   %1i\n"
++				"nptxfempty:   %1i     ginnakeff:  %1i    goutnakeff: %1i    ulpickint:   %1i\n"
++				"i2cintr:      %1i     erlysuspend:%1i    usbsuspend: %1i    usbreset:    %1i\n"
++				"enumdone:     %1i     isooutdrop: %1i    eopframe:   %1i    restoredone: %1i\n"
++				"epmismatch:   %1i     inepintr:   %1i    outepintr:  %1i    incomplisoin:%1i\n"
++				"incomplisoout:%1i     fetsusp:    %1i    resetdet:   %1i    portintr:    %1i\n"
++				"hcintr:       %1i     ptxfempty:  %1i    lpmtranrcvd:%1i    conidstschng:%1i\n"
++				"disconnect:   %1i     sessreqintr:%1i    wkupintr:   %1i\n",
++				function_name,
++				gintmsk.b.modemismatch,
++				gintmsk.b.otgintr,
++				gintmsk.b.sofintr,
++				gintmsk.b.rxstsqlvl,
++				gintmsk.b.nptxfempty,
++				gintmsk.b.ginnakeff,
++				gintmsk.b.goutnakeff,
++				gintmsk.b.ulpickint,
++				gintmsk.b.i2cintr,
++				gintmsk.b.erlysuspend,
++				gintmsk.b.usbsuspend,
++				gintmsk.b.usbreset,
++				gintmsk.b.enumdone,
++				gintmsk.b.isooutdrop,
++				gintmsk.b.eopframe,
++				gintmsk.b.restoredone,
++				gintmsk.b.epmismatch,
++				gintmsk.b.inepintr,
++				gintmsk.b.outepintr,
++				gintmsk.b.incomplisoin,
++				gintmsk.b.incomplisoout,
++				gintmsk.b.fetsusp,
++				gintmsk.b.resetdet,
++				gintmsk.b.portintr,
++				gintmsk.b.hcintr,
++				gintmsk.b.ptxfempty,
++				gintmsk.b.lpmtranrcvd,
++				gintmsk.b.conidstschng,
++				gintmsk.b.disconnect,
++				gintmsk.b.sessreqintr,
++				gintmsk.b.wkupintr);
++	return;
++}
++ 
++void dwc_debug_otg_int(gotgint_data_t gotgint, const char* function_name)
++{
++	DWC_DEBUGPL(DBG_USER,	"otg int register (from %s function):\n"
++				"sesenddet:%1i    sesreqsucstschung:%2i    hstnegsucstschng:%1i\n"
++				"hstnegdet:%1i    adevtoutchng:     %2i    debdone:         %1i\n"
++				"mvic:     %1i\n",
++				function_name,
++				gotgint.b.sesenddet,
++				gotgint.b.sesreqsucstschng,
++				gotgint.b.hstnegsucstschng,
++				gotgint.b.hstnegdet,
++				gotgint.b.adevtoutchng,
++				gotgint.b.debdone,
++				gotgint.b.mvic);
++
++	return;
++}
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,36 @@
++#ifndef __DWC_OTG_MPHI_FIX_H__
++#define __DWC_OTG_MPHI_FIX_H__
++
++#define FIQ_WRITE_IO_ADDRESS(_addr_,_data_) *(volatile uint32_t *) IO_ADDRESS(_addr_) = _data_
++#define FIQ_READ_IO_ADDRESS(_addr_) *(volatile uint32_t *) IO_ADDRESS(_addr_) 
++#define FIQ_MODIFY_IO_ADDRESS(_addr_,_clear_,_set_) FIQ_WRITE_IO_ADDRESS(_addr_ , (FIQ_READ_IO_ADDRESS(_addr_)&~_clear_)|_set_)
++#define FIQ_WRITE(_addr_,_data_) *(volatile uint32_t *) _addr_ = _data_
++
++typedef struct {
++	volatile void* base;
++	volatile void* ctrl;
++	volatile void* outdda;
++	volatile void* outddb;
++	volatile void* intstat;
++} mphi_regs_t; 
++
++void dwc_debug_print_core_int_reg(gintsts_data_t gintsts, const char* function_name);
++void dwc_debug_core_int_mask(gintsts_data_t gintmsk, const char* function_name);
++void dwc_debug_otg_int(gotgint_data_t gotgint, const char* function_name);
++
++
++
++#ifdef DEBUG
++#define DWC_DBG_PRINT_CORE_INT(_arg_) dwc_debug_print_core_int_reg(_arg_,__func__)
++#define DWC_DBG_PRINT_CORE_INT_MASK(_arg_) dwc_debug_core_int_mask(_arg_,__func__)
++#define DWC_DBG_PRINT_OTG_INT(_arg_) dwc_debug_otg_int(_arg_,__func__)
++
++#else
++#define DWC_DBG_PRINT_CORE_INT(_arg_)
++#define DWC_DBG_PRINT_CORE_INT_MASK(_arg_)
++#define DWC_DBG_PRINT_OTG_INT(_arg_)
++
++
++#endif
++
++#endif
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,188 @@
++#ifndef _DWC_OS_DEP_H_
++#define _DWC_OS_DEP_H_
++
++/**
++ * @file
++ *
++ * This file contains OS dependent structures.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/ctype.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/jiffies.h>
++#include <linux/delay.h>
++#include <linux/timer.h>
++#include <linux/workqueue.h>
++#include <linux/stat.h>
++#include <linux/pci.h>
++
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++# include <linux/irq.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++# include <linux/usb/gadget.h>
++#else
++# include <linux/usb_gadget.h>
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++# include <asm/irq.h>
++#endif
++
++#ifdef PCI_INTERFACE
++# include <asm/io.h>
++#endif
++
++#ifdef LM_INTERFACE
++# include <asm/unaligned.h>
++# include <asm/sizes.h>
++# include <asm/param.h>
++# include <asm/io.h>
++# if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
++#  include <asm/arch/hardware.h>
++#  include <asm/arch/lm.h>
++#  include <asm/arch/irqs.h>
++#  include <asm/arch/regs-irq.h>
++# else
++/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure -
++   here we assume that the machine architecture provides definitions
++   in its own header
++*/
++#  include <mach/lm.h>
++#  include <mach/hardware.h>
++# endif
++#endif
++
++#ifdef PLATFORM_INTERFACE
++#include <linux/platform_device.h>
++#include <asm/mach/map.h>
++#endif
++
++/** The OS page size */
++#define DWC_OS_PAGE_SIZE	PAGE_SIZE
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
++typedef int gfp_t;
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++# define IRQF_SHARED SA_SHIRQ
++#endif
++
++typedef struct os_dependent {
++	/** Base address returned from ioremap() */
++	void *base;
++
++	/** Register offset for Diagnostic API */
++	uint32_t reg_offset;
++
++	/** Base address for MPHI peripheral */
++	void *mphi_base;
++
++#ifdef LM_INTERFACE
++	struct lm_device *lmdev;
++#elif  defined(PCI_INTERFACE)
++	struct pci_dev *pcidev;
++
++	/** Start address of a PCI region */
++	resource_size_t rsrc_start;
++	
++	/** Length address of a PCI region */
++	resource_size_t rsrc_len;
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *platformdev;
++#endif
++
++} os_dependent_t;
++
++#ifdef __cplusplus
++}
++#endif
++
++
++
++/* Type for the our device on the chosen bus */
++#if   defined(LM_INTERFACE)
++typedef struct lm_device       dwc_bus_dev_t;
++#elif defined(PCI_INTERFACE)
++typedef struct pci_dev         dwc_bus_dev_t;
++#elif defined(PLATFORM_INTERFACE)
++typedef struct platform_device dwc_bus_dev_t;
++#endif
++
++/* Helper macro to retrieve drvdata from the device on the chosen bus */
++#if    defined(LM_INTERFACE)
++#define DWC_OTG_BUSDRVDATA(_dev) lm_get_drvdata(_dev)
++#elif  defined(PCI_INTERFACE)
++#define DWC_OTG_BUSDRVDATA(_dev) pci_get_drvdata(_dev)
++#elif  defined(PLATFORM_INTERFACE)
++#define DWC_OTG_BUSDRVDATA(_dev) platform_get_drvdata(_dev)
++#endif
++
++/**
++ * Helper macro returning the otg_device structure of a given struct device
++ *
++ * c.f. static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev)
++ */
++#ifdef LM_INTERFACE
++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
++                struct lm_device *lm_dev = \
++                        container_of(_dev, struct lm_device, dev); \
++                _var = lm_get_drvdata(lm_dev); \
++        } while (0)
++
++#elif defined(PCI_INTERFACE)
++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
++                _var = dev_get_drvdata(_dev); \
++        } while (0)
++
++#elif defined(PLATFORM_INTERFACE)
++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
++                struct platform_device *platform_dev = \
++                        container_of(_dev, struct platform_device, dev); \
++                _var = platform_get_drvdata(platform_dev); \
++        } while (0)
++#endif
++
++
++/**
++ * Helper macro returning the struct dev of the given struct os_dependent
++ *
++ * c.f. static struct device *dwc_otg_getdev(struct os_dependent *osdep)
++ */
++#ifdef LM_INTERFACE
++#define DWC_OTG_OS_GETDEV(_osdep) \
++        ((_osdep).lmdev == NULL? NULL: &(_osdep).lmdev->dev)
++#elif defined(PCI_INTERFACE)
++#define DWC_OTG_OS_GETDEV(_osdep) \
++        ((_osdep).pci_dev == NULL? NULL: &(_osdep).pci_dev->dev)
++#elif defined(PLATFORM_INTERFACE)
++#define DWC_OTG_OS_GETDEV(_osdep) \
++        ((_osdep).platformdev == NULL? NULL: &(_osdep).platformdev->dev)
++#endif
++
++
++
++
++#endif /* _DWC_OS_DEP_H_ */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,2708 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
++ * $Revision: #101 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++/** @file
++ * This file implements PCD Core. All code in this file is portable and doesn't
++ * use any OS specific functions.
++ * PCD Core provides Interface, defined in <code><dwc_otg_pcd_if.h></code>
++ * header file, which can be used to implement OS specific PCD interface.
++ *
++ * An important function of the PCD is managing interrupts generated
++ * by the DWC_otg controller. The implementation of the DWC_otg device
++ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
++ *
++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
++ * @todo Does it work when the request size is greater than DEPTSIZ
++ * transfer size
++ *
++ */
++
++#include "dwc_otg_pcd.h"
++
++#ifdef DWC_UTE_CFI
++#include "dwc_otg_cfi.h"
++
++extern int init_cfi(cfiobject_t * cfiobj);
++#endif
++
++/**
++ * Choose endpoint from ep arrays using usb_ep structure.
++ */
++static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle)
++{
++	int i;
++	if (pcd->ep0.priv == handle) {
++		return &pcd->ep0;
++	}
++	for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) {
++		if (pcd->in_ep[i].priv == handle)
++			return &pcd->in_ep[i];
++		if (pcd->out_ep[i].priv == handle)
++			return &pcd->out_ep[i];
++	}
++
++	return NULL;
++}
++
++/**
++ * This function completes a request.  It call's the request call back.
++ */
++void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req,
++			  int32_t status)
++{
++	unsigned stopped = ep->stopped;
++	
++	DWC_DEBUGPL(DBG_PCDV, "%s(ep %p req %p)\n", __func__, ep, req);
++	DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry);
++
++	/* don't modify queue heads during completion callback */
++	ep->stopped = 1;
++	/* spin_unlock/spin_lock now done in fops->complete() */
++	ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status,
++				req->actual);
++
++	if (ep->pcd->request_pending > 0) {
++		--ep->pcd->request_pending;
++	}
++
++	ep->stopped = stopped;
++	DWC_FREE(req);
++}
++
++/**
++ * This function terminates all the requsts in the EP request queue.
++ */
++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_pcd_request_t *req;
++
++	ep->stopped = 1;
++
++	/* called with irqs blocked?? */
++	while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN);
++	}
++}
++
++void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd,
++		       const struct dwc_otg_pcd_function_ops *fops)
++{
++	pcd->fops = fops;
++}
++
++/**
++ * PCD Callback function for initializing the PCD when switching to
++ * device mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_start_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	/*
++	 * Initialized the Core for Device mode.
++	 */
++	if (dwc_otg_is_device_mode(core_if)) {
++		dwc_otg_core_dev_init(core_if);
++		/* Set core_if's lock pointer to the pcd->lock */
++		core_if->lock = pcd->lock;
++	}
++	return 1;
++}
++
++/** CFI-specific buffer allocation function for EP */
++#ifdef DWC_UTE_CFI
++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr,
++			      size_t buflen, int flags)
++{
++	dwc_otg_pcd_ep_t *ep;
++	ep = get_ep_from_handle(pcd, pep);
++	if (!ep) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen,
++					  flags);
++}
++#else
++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr,
++			      size_t buflen, int flags);
++#endif
++
++/**
++ * PCD Callback function for notifying the PCD when resuming from
++ * suspend.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_resume_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++
++	if (pcd->fops->resume) {
++		pcd->fops->resume(pcd);
++	}
++
++	/* Stop the SRP timeout timer. */
++	if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS)
++	    || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
++		if (GET_CORE_IF(pcd)->srp_timer_started) {
++			GET_CORE_IF(pcd)->srp_timer_started = 0;
++			DWC_TIMER_CANCEL(GET_CORE_IF(pcd)->srp_timer);
++		}
++	}
++	return 1;
++}
++
++/**
++ * PCD Callback function for notifying the PCD device is suspended.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_suspend_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++
++	if (pcd->fops->suspend) {
++		DWC_SPINUNLOCK(pcd->lock);
++		pcd->fops->suspend(pcd);
++		DWC_SPINLOCK(pcd->lock);
++	}
++
++	return 1;
++}
++
++/**
++ * PCD Callback function for stopping the PCD when switching to Host
++ * mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_stop_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++	extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd);
++
++	dwc_otg_pcd_stop(pcd);
++	return 1;
++}
++
++/**
++ * PCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t pcd_callbacks = {
++	.start = dwc_otg_pcd_start_cb,
++	.stop = dwc_otg_pcd_stop_cb,
++	.suspend = dwc_otg_pcd_suspend_cb,
++	.resume_wakeup = dwc_otg_pcd_resume_cb,
++	.p = 0,			/* Set at registration */
++};
++
++/**
++ * This function allocates a DMA Descriptor chain for the Endpoint
++ * buffer to be used for a transfer to/from the specified endpoint.
++ */
++dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(dwc_dma_t * dma_desc_addr,
++						    uint32_t count)
++{
++	return DWC_DMA_ALLOC_ATOMIC(count * sizeof(dwc_otg_dev_dma_desc_t), 
++							dma_desc_addr);
++}
++
++/**
++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
++ */
++void dwc_otg_ep_free_desc_chain(dwc_otg_dev_dma_desc_t * desc_addr,
++				uint32_t dma_desc_addr, uint32_t count)
++{
++	DWC_DMA_FREE(count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr,
++		     dma_desc_addr);
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if,
++					dwc_ep_t * dwc_ep)
++{
++
++	dsts_data_t dsts = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++	int i, j;
++	uint32_t len;
++
++	if (dwc_ep->is_in)
++		dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
++	else
++		dwc_ep->desc_cnt =
++		    dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
++		    dwc_ep->bInterval;
++
++	/** Allocate descriptors for double buffering */
++	dwc_ep->iso_desc_addr =
++	    dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,
++					dwc_ep->desc_cnt * 2);
++	if (dwc_ep->desc_addr) {
++		DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
++		return;
++	}
++
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/** ISO OUT EP */
++	if (dwc_ep->is_in == 0) {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		uint32_t data_per_desc;
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[dwc_ep->num];
++		int offset;
++
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++		dma_ad = (dma_addr_t) DWC_READ_REG32(&(out_regs->doepdma));
++
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		offset = 0;
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				uint32_t len = (j + 1) * dwc_ep->maxpacket;
++				if (len > dwc_ep->data_per_frame)
++					data_per_desc =
++					    dwc_ep->data_per_frame -
++					    j * dwc_ep->maxpacket;
++				else
++					data_per_desc = dwc_ep->maxpacket;
++				len = data_per_desc % 4;
++				if (len)
++					data_per_desc += 4 - len;
++
++				sts.b_iso_out.rxbytes = data_per_desc;
++				dma_desc->buf = dma_ad;
++				dma_desc->status.d32 = sts.d32;
++
++				offset += data_per_desc;
++				dma_desc++;
++				dma_ad += data_per_desc;
++			}
++		}
++
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++			uint32_t len = (j + 1) * dwc_ep->maxpacket;
++			if (len > dwc_ep->data_per_frame)
++				data_per_desc =
++				    dwc_ep->data_per_frame -
++				    j * dwc_ep->maxpacket;
++			else
++				data_per_desc = dwc_ep->maxpacket;
++			len = data_per_desc % 4;
++			if (len)
++				data_per_desc += 4 - len;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			offset += data_per_desc;
++			dma_desc++;
++			dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		len = (j + 1) * dwc_ep->maxpacket;
++		if (len > dwc_ep->data_per_frame)
++			data_per_desc =
++			    dwc_ep->data_per_frame - j * dwc_ep->maxpacket;
++		else
++			data_per_desc = dwc_ep->maxpacket;
++		len = data_per_desc % 4;
++		if (len)
++			data_per_desc += 4 - len;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++		dma_desc++;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_out.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		offset = 0;
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				uint32_t len = (j + 1) * dwc_ep->maxpacket;
++				if (len > dwc_ep->data_per_frame)
++					data_per_desc =
++					    dwc_ep->data_per_frame -
++					    j * dwc_ep->maxpacket;
++				else
++					data_per_desc = dwc_ep->maxpacket;
++				len = data_per_desc % 4;
++				if (len)
++					data_per_desc += 4 - len;
++
++				data_per_desc =
++				    sts.b_iso_out.rxbytes = data_per_desc;
++				dma_desc->buf = dma_ad;
++				dma_desc->status.d32 = sts.d32;
++
++				offset += data_per_desc;
++				dma_desc++;
++				dma_ad += data_per_desc;
++			}
++		}
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++			data_per_desc =
++			    ((j + 1) * dwc_ep->maxpacket >
++			     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++			    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc +=
++			    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			offset += data_per_desc;
++			dma_desc++;
++			dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = 1;
++		data_per_desc =
++		    ((j + 1) * dwc_ep->maxpacket >
++		     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++		    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc +=
++		    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++
++		dwc_ep->next_frame = 0;
++
++		/** Write dma_ad into DOEPDMA register */
++		DWC_WRITE_REG32(&(out_regs->doepdma),
++				(uint32_t) dwc_ep->iso_dma_desc_addr);
++
++	}
++	/** ISO IN EP */
++	else {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[dwc_ep->num];
++		unsigned int frmnumber;
++		fifosize_data_t txfifosize, rxfifosize;
++
++		txfifosize.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->
++				   dtxfsts);
++		rxfifosize.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++
++		dma_ad = dwc_ep->dma_addr0;
++
++		dsts.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp =
++		    (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++
++		frmnumber = dwc_ep->next_frame;
++
++		sts.b_iso_in.framenum = frmnumber;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		/** Buffer 0 descriptors setup */
++		for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++			dma_desc++;
++
++			dma_ad += dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++		++dma_desc;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_in.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++			dma_desc++;
++
++			dma_ad += dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++
++			sts.b_iso_in.ioc = 0;
++		}
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = 1;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++
++		dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
++
++		/** Write dma_ad into diepdma register */
++		DWC_WRITE_REG32(&(in_regs->diepdma),
++				(uint32_t) dwc_ep->iso_dma_desc_addr);
++	}
++	/** Enable endpoint, clear nak  */
++	depctl.d32 = 0;
++	depctl.b.epena = 1;
++	depctl.b.usbactep = 1;
++	depctl.b.cnak = 1;
++
++	DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
++	depctl.d32 = DWC_READ_REG32(addr);
++}
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if,
++				       dwc_ep_t * ep)
++{
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++
++	if (ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) {
++		return;
++	} else {
++		deptsiz_data_t deptsiz = {.d32 = 0 };
++
++		ep->xfer_len =
++		    ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
++		ep->pkt_cnt =
++		    (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
++		ep->xfer_count = 0;
++		ep->xfer_buff =
++		    (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->dma_addr =
++		    (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++
++		if (ep->is_in) {
++			/* Program the transfer size and packet count
++			 *      as follows: xfersize = N * maxpacket +
++			 *      short_packet pktcnt = N + (short_packet
++			 *      exist ? 1 : 0) 
++			 */
++			deptsiz.b.mc = ep->pkt_per_frm;
++			deptsiz.b.xfersize = ep->xfer_len;
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					dieptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->in_ep_regs[ep->num]->
++					 diepdma), (uint32_t) ep->dma_addr);
++
++		} else {
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len + (ep->maxpacket - 1)) /
++			    ep->maxpacket;
++			deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->
++					doeptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->out_ep_regs[ep->num]->
++					 doepdma), (uint32_t) ep->dma_addr);
++
++		}
++		/** Enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if,
++					  dwc_ep_t * ep)
++{
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			if (ep->is_in) {
++				ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
++			} else {
++				ep->desc_cnt = ep->pkt_cnt;
++			}
++			dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
++		} else {
++			if (core_if->pti_enh_enable) {
++				dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
++			} else {
++				ep->cur_pkt_addr =
++				    (ep->proc_buf_num) ? ep->xfer_buff1 : ep->
++				    xfer_buff0;
++				ep->cur_pkt_dma_addr =
++				    (ep->proc_buf_num) ? ep->dma_addr1 : ep->
++				    dma_addr0;
++				dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++			}
++		}
++	} else {
++		ep->cur_pkt_addr =
++		    (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->cur_pkt_dma_addr =
++		    (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++		dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++	}
++}
++
++/**
++ * This function stops transfer for an EP and
++ * resets the ep's variables. 
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++
++	if (ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	/* disable the ep */
++	depctl.d32 = DWC_READ_REG32(addr);
++
++	depctl.b.epdis = 1;
++	depctl.b.snak = 1;
++
++	DWC_WRITE_REG32(addr, depctl.d32);
++
++	if (core_if->dma_desc_enable &&
++	    ep->iso_desc_addr && ep->iso_dma_desc_addr) {
++		dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,
++					   ep->iso_dma_desc_addr,
++					   ep->desc_cnt * 2);
++	}
++
++	/* reset varibales */
++	ep->dma_addr0 = 0;
++	ep->dma_addr1 = 0;
++	ep->xfer_buff0 = 0;
++	ep->xfer_buff1 = 0;
++	ep->data_per_frame = 0;
++	ep->data_pattern_frame = 0;
++	ep->sync_frame = 0;
++	ep->buf_proc_intrvl = 0;
++	ep->bInterval = 0;
++	ep->proc_buf_num = 0;
++	ep->pkt_per_frm = 0;
++	ep->pkt_per_frm = 0;
++	ep->desc_cnt = 0;
++	ep->iso_desc_addr = 0;
++	ep->iso_dma_desc_addr = 0;
++}
++
++int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle,
++			     uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0,
++			     dwc_dma_t dma1, int sync_frame, int dp_frame,
++			     int data_per_frame, int start_frame,
++			     int buf_proc_intrvl, void *req_handle,
++			     int atomic_alloc)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags = 0;
++	dwc_ep_t *dwc_ep;
++	int32_t frm_data;
++	dsts_data_t dsts;
++	dwc_otg_core_if_t *core_if;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if (!ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	core_if = GET_CORE_IF(pcd);
++	dwc_ep = &ep->dwc_ep;
++
++	if (ep->iso_req_handle) {
++		DWC_WARN("ISO request in progress\n");
++	}
++
++	dwc_ep->dma_addr0 = dma0;
++	dwc_ep->dma_addr1 = dma1;
++
++	dwc_ep->xfer_buff0 = buf0;
++	dwc_ep->xfer_buff1 = buf1;
++
++	dwc_ep->data_per_frame = data_per_frame;
++
++	/** @todo - pattern data support is to be implemented in the future */
++	dwc_ep->data_pattern_frame = dp_frame;
++	dwc_ep->sync_frame = sync_frame;
++
++	dwc_ep->buf_proc_intrvl = buf_proc_intrvl;
++
++	dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
++
++	dwc_ep->proc_buf_num = 0;
++
++	dwc_ep->pkt_per_frm = 0;
++	frm_data = ep->dwc_ep.data_per_frame;
++	while (frm_data > 0) {
++		dwc_ep->pkt_per_frm++;
++		frm_data -= ep->dwc_ep.maxpacket;
++	}
++
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	if (start_frame == -1) {
++		dwc_ep->next_frame = dsts.b.soffn + 1;
++		if (dwc_ep->bInterval != 1) {
++			dwc_ep->next_frame =
++			    dwc_ep->next_frame + (dwc_ep->bInterval - 1 -
++						  dwc_ep->next_frame %
++						  dwc_ep->bInterval);
++		}
++	} else {
++		dwc_ep->next_frame = start_frame;
++	}
++
++	if (!core_if->pti_enh_enable) {
++		dwc_ep->pkt_cnt =
++		    dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
++		    dwc_ep->bInterval;
++	} else {
++		dwc_ep->pkt_cnt =
++		    (dwc_ep->data_per_frame *
++		     (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
++		     - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
++	}
++
++	if (core_if->dma_desc_enable) {
++		dwc_ep->desc_cnt =
++		    dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
++		    dwc_ep->bInterval;
++	}
++
++	if (atomic_alloc) {
++		dwc_ep->pkt_info =
++		    DWC_ALLOC_ATOMIC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	} else {
++		dwc_ep->pkt_info =
++		    DWC_ALLOC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	}
++	if (!dwc_ep->pkt_info) {
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		return -DWC_E_NO_MEMORY;
++	}
++	if (core_if->pti_enh_enable) {
++		dwc_memset(dwc_ep->pkt_info, 0,
++			   sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	}
++
++	dwc_ep->cur_pkt = 0;
++	ep->iso_req_handle = req_handle;
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++	dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
++	return 0;
++}
++
++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle,
++			    void *req_handle)
++{
++	dwc_irqflags_t flags = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++	dwc_ep = &ep->dwc_ep;
++
++	dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
++
++	DWC_FREE(dwc_ep->pkt_info);
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	if (ep->iso_req_handle != req_handle) {
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	ep->iso_req_handle = 0;
++	return 0;
++}
++
++/**
++ * This function is used for perodical data exchnage between PCD and gadget drivers.
++ * for Isochronous EPs
++ *
++ *	- Every time a sync period completes this function is called to
++ *	  perform data exchange between PCD and gadget
++ */
++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep,
++			     void *req_handle)
++{
++	int i;
++	dwc_ep_t *dwc_ep;
++
++	dwc_ep = &ep->dwc_ep;
++
++	DWC_SPINUNLOCK(ep->pcd->lock);
++	pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle,
++				 dwc_ep->proc_buf_num ^ 0x1);
++	DWC_SPINLOCK(ep->pcd->lock);
++
++	for (i = 0; i < dwc_ep->pkt_cnt; ++i) {
++		dwc_ep->pkt_info[i].status = 0;
++		dwc_ep->pkt_info[i].offset = 0;
++		dwc_ep->pkt_info[i].length = 0;
++	}
++}
++
++int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle,
++				     void *iso_req_handle)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++	dwc_ep = &ep->dwc_ep;
++
++	return dwc_ep->pkt_cnt;
++}
++
++void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle,
++				       void *iso_req_handle, int packet,
++				       int *status, int *actual, int *offset)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep)
++		DWC_WARN("bad ep\n");
++
++	dwc_ep = &ep->dwc_ep;
++
++	*status = dwc_ep->pkt_info[packet].status;
++	*actual = dwc_ep->pkt_info[packet].length;
++	*offset = dwc_ep->pkt_info[packet].offset;
++}
++
++#endif /* DWC_EN_ISOC */
++
++static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep,
++				uint32_t is_in, uint32_t ep_num)
++{
++	/* Init EP structure */
++	pcd_ep->desc = 0;
++	pcd_ep->pcd = pcd;
++	pcd_ep->stopped = 1;
++	pcd_ep->queue_sof = 0;
++
++	/* Init DWC ep structure */
++	pcd_ep->dwc_ep.is_in = is_in;
++	pcd_ep->dwc_ep.num = ep_num;
++	pcd_ep->dwc_ep.active = 0;
++	pcd_ep->dwc_ep.tx_fifo_num = 0;
++	/* Control until ep is actvated */
++	pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++	pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++	pcd_ep->dwc_ep.dma_addr = 0;
++	pcd_ep->dwc_ep.start_xfer_buff = 0;
++	pcd_ep->dwc_ep.xfer_buff = 0;
++	pcd_ep->dwc_ep.xfer_len = 0;
++	pcd_ep->dwc_ep.xfer_count = 0;
++	pcd_ep->dwc_ep.sent_zlp = 0;
++	pcd_ep->dwc_ep.total_len = 0;
++	pcd_ep->dwc_ep.desc_addr = 0;
++	pcd_ep->dwc_ep.dma_desc_addr = 0;
++	DWC_CIRCLEQ_INIT(&pcd_ep->queue);
++}
++
++/**
++ * Initialize ep's
++ */
++static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd)
++{
++	int i;
++	uint32_t hwcfg1;
++	dwc_otg_pcd_ep_t *ep;
++	int in_ep_cntr, out_ep_cntr;
++	uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
++	uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
++
++	/**
++	 * Initialize the EP0 structure.
++	 */
++	ep = &pcd->ep0;
++	dwc_otg_pcd_init_ep(pcd, ep, 0, 0);
++
++	in_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
++	for (i = 1; in_ep_cntr < num_in_eps; i++) {
++		if ((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
++			in_ep_cntr++;
++			/**
++			 * @todo NGS: Add direction to EP, based on contents
++			 * of HWCFG1.  Need a copy of HWCFG1 in pcd structure?
++			 * sprintf(";r
++			 */
++			dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i);
++
++			DWC_CIRCLEQ_INIT(&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	out_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
++	for (i = 1; out_ep_cntr < num_out_eps; i++) {
++		if ((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
++			out_ep_cntr++;
++			/**
++			 * @todo NGS: Add direction to EP, based on contents
++			 * of HWCFG1.  Need a copy of HWCFG1 in pcd structure?
++			 * sprintf(";r
++			 */
++			dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i);
++			DWC_CIRCLEQ_INIT(&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	pcd->ep0state = EP0_DISCONNECT;
++	pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
++	pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++}
++
++/**
++ * This function is called when the SRP timer expires. The SRP should
++ * complete within 6 seconds.
++ */
++static void srp_timeout(void *ptr)
++{
++	gotgctl_data_t gotgctl;
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++	volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
++
++	gotgctl.d32 = DWC_READ_REG32(addr);
++
++	core_if->srp_timer_started = 0;
++	
++	if (core_if->adp_enable) {
++		if (gotgctl.b.bsesvld == 0) {
++			gpwrdn_data_t gpwrdn = {.d32 = 0 };
++			DWC_PRINTF("SRP Timeout BSESSVLD = 0\n");
++			/* Power off the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gpwrdn,
++						 gpwrdn.d32, 0);
++			}
++
++			gpwrdn.d32 = 0;
++			gpwrdn.b.pmuintsel = 1;
++			gpwrdn.b.pmuactv = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++			dwc_otg_adp_probe_start(core_if);
++		} else {
++			DWC_PRINTF("SRP Timeout BSESSVLD = 1\n");
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++		}
++	}
++
++	if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++	    (core_if->core_params->i2c_enable)) {
++		DWC_PRINTF("SRP Timeout\n");
++
++		if ((core_if->srp_success) && (gotgctl.b.bsesvld)) {
++			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++				core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++			}
++
++			/* Clear Session Request */
++			gotgctl.d32 = 0;
++			gotgctl.b.sesreq = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl,
++					 gotgctl.d32, 0);
++
++			core_if->srp_success = 0;
++		} else {
++			__DWC_ERROR("Device not connected/responding\n");
++			gotgctl.b.sesreq = 0;
++			DWC_WRITE_REG32(addr, gotgctl.d32);
++		}
++	} else if (gotgctl.b.sesreq) {
++		DWC_PRINTF("SRP Timeout\n");
++
++		__DWC_ERROR("Device not connected/responding\n");
++		gotgctl.b.sesreq = 0;
++		DWC_WRITE_REG32(addr, gotgctl.d32);
++	} else {
++		DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32);
++	}
++}
++
++/**
++ * Tasklet
++ *
++ */
++extern void start_next_request(dwc_otg_pcd_ep_t * ep);
++
++static void start_xfer_tasklet_func(void *data)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	int i;
++	depctl_data_t diepctl;
++
++	DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
++
++	diepctl.d32 = DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl);
++
++	if (pcd->ep0.queue_sof) {
++		pcd->ep0.queue_sof = 0;
++		start_next_request(&pcd->ep0);
++		// break;
++	}
++
++	for (i = 0; i < core_if->dev_if->num_in_eps; i++) {
++		depctl_data_t diepctl;
++		diepctl.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl);
++
++		if (pcd->in_ep[i].queue_sof) {
++			pcd->in_ep[i].queue_sof = 0;
++			start_next_request(&pcd->in_ep[i]);
++			// break;
++		}
++	}
++
++	return;
++}
++
++/**
++ * This function initialized the PCD portion of the driver.
++ *
++ */
++dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_pcd_t *pcd = NULL;
++	dwc_otg_dev_if_t *dev_if;
++	int i;
++
++	/*
++	 * Allocate PCD structure
++	 */
++	pcd = DWC_ALLOC(sizeof(dwc_otg_pcd_t));
++
++	if (pcd == NULL) {
++		return NULL;
++	}
++
++	pcd->lock = DWC_SPINLOCK_ALLOC();
++        DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n",
++                    pcd, core_if);//GRAYG
++	if (!pcd->lock) {
++		DWC_ERROR("Could not allocate lock for pcd");
++		DWC_FREE(pcd);
++		return NULL;
++	}
++	/* Set core_if's lock pointer to hcd->lock */
++	core_if->lock = pcd->lock;
++	pcd->core_if = core_if;
++
++	dev_if = core_if->dev_if;
++	dev_if->isoc_ep = NULL;
++
++	if (core_if->hwcfg4.b.ded_fifo_en) {
++		DWC_PRINTF("Dedicated Tx FIFOs mode\n");
++	} else {
++		DWC_PRINTF("Shared Tx FIFO mode\n");
++	}
++
++	/*
++	 * Initialized the Core for Device mode here if there is nod ADP support. 
++	 * Otherwise it will be done later in dwc_otg_adp_start routine.
++	 */																				 
++	if (dwc_otg_is_device_mode(core_if) /*&& !core_if->adp_enable*/) {
++		dwc_otg_core_dev_init(core_if);
++	}
++
++	/*
++	 * Register the PCD Callbacks.
++	 */
++	dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd);
++
++	/*
++	 * Initialize the DMA buffer for SETUP packets
++	 */
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		pcd->setup_pkt =
++		    DWC_DMA_ALLOC(sizeof(*pcd->setup_pkt) * 5,
++				  &pcd->setup_pkt_dma_handle);
++		if (pcd->setup_pkt == NULL) {
++			DWC_FREE(pcd);
++			return NULL;
++		}
++
++		pcd->status_buf =
++		    DWC_DMA_ALLOC(sizeof(uint16_t),
++				  &pcd->status_buf_dma_handle);
++		if (pcd->status_buf == NULL) {
++			DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5,
++				     pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++			DWC_FREE(pcd);
++			return NULL;
++		}
++
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dev_if->setup_desc_addr[0] =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_setup_desc_addr[0], 1);
++			dev_if->setup_desc_addr[1] =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_setup_desc_addr[1], 1);
++			dev_if->in_desc_addr =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_in_desc_addr, 1);
++			dev_if->out_desc_addr =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_out_desc_addr, 1);
++			pcd->data_terminated = 0;
++
++			if (dev_if->setup_desc_addr[0] == 0
++			    || dev_if->setup_desc_addr[1] == 0
++			    || dev_if->in_desc_addr == 0
++			    || dev_if->out_desc_addr == 0) {
++
++				if (dev_if->out_desc_addr)
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->out_desc_addr,
++					     dev_if->dma_out_desc_addr, 1);
++				if (dev_if->in_desc_addr)
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->in_desc_addr,
++					     dev_if->dma_in_desc_addr, 1);
++				if (dev_if->setup_desc_addr[1])
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->setup_desc_addr[1],
++					     dev_if->dma_setup_desc_addr[1], 1);
++				if (dev_if->setup_desc_addr[0])
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->setup_desc_addr[0],
++					     dev_if->dma_setup_desc_addr[0], 1);
++
++				DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5,
++					     pcd->setup_pkt,
++					     pcd->setup_pkt_dma_handle);
++				DWC_DMA_FREE(sizeof(*pcd->status_buf),
++					     pcd->status_buf,
++					     pcd->status_buf_dma_handle);
++
++				DWC_FREE(pcd);
++
++				return NULL;
++			}
++		}
++	} else {
++		pcd->setup_pkt = DWC_ALLOC(sizeof(*pcd->setup_pkt) * 5);
++		if (pcd->setup_pkt == NULL) {
++			DWC_FREE(pcd);
++			return NULL;
++		}
++
++		pcd->status_buf = DWC_ALLOC(sizeof(uint16_t));
++		if (pcd->status_buf == NULL) {
++			DWC_FREE(pcd->setup_pkt);
++			DWC_FREE(pcd);
++			return NULL;
++		}
++	}
++
++	dwc_otg_pcd_reinit(pcd);
++
++	/* Allocate the cfi object for the PCD */
++#ifdef DWC_UTE_CFI
++	pcd->cfi = DWC_ALLOC(sizeof(cfiobject_t));
++	if (NULL == pcd->cfi)
++		goto fail;
++	if (init_cfi(pcd->cfi)) {
++		CFI_INFO("%s: Failed to init the CFI object\n", __func__);
++		goto fail;
++	}
++#endif
++
++	/* Initialize tasklets */
++	pcd->start_xfer_tasklet = DWC_TASK_ALLOC("xfer_tasklet",
++						 start_xfer_tasklet_func, pcd);
++	pcd->test_mode_tasklet = DWC_TASK_ALLOC("test_mode_tasklet",
++						do_test_mode, pcd);
++
++	/* Initialize SRP timer */
++	core_if->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if);
++	
++	if (core_if->core_params->dev_out_nak) {
++		/** 
++		* Initialize xfer timeout timer. Implemented for
++		* 2.93a feature "Device DDMA OUT NAK Enhancement"
++		*/
++		for(i = 0; i < MAX_EPS_CHANNELS; i++) {
++			pcd->core_if->ep_xfer_timer[i] =
++				DWC_TIMER_ALLOC("ep timer", ep_xfer_timeout,
++				&pcd->core_if->ep_xfer_info[i]);
++		}
++	}
++	
++	return pcd;
++#ifdef DWC_UTE_CFI
++fail:
++#endif
++	if (pcd->setup_pkt)
++		DWC_FREE(pcd->setup_pkt);
++	if (pcd->status_buf)
++		DWC_FREE(pcd->status_buf);
++#ifdef DWC_UTE_CFI
++	if (pcd->cfi)
++		DWC_FREE(pcd->cfi);
++#endif
++	if (pcd)
++		DWC_FREE(pcd);
++	return NULL;
++
++}
++
++/**
++ * Remove PCD specific data
++ */
++void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	int i;
++	if (pcd->core_if->core_params->dev_out_nak) {
++		for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++			DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[i]);
++			pcd->core_if->ep_xfer_info[i].state = 0;
++		}
++	}
++
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt,
++			     pcd->setup_pkt_dma_handle);
++		DWC_DMA_FREE(sizeof(uint16_t), pcd->status_buf,
++			     pcd->status_buf_dma_handle);
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0],
++						   dev_if->dma_setup_desc_addr
++						   [0], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1],
++						   dev_if->dma_setup_desc_addr
++						   [1], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr,
++						   dev_if->dma_in_desc_addr, 1);
++			dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr,
++						   dev_if->dma_out_desc_addr,
++						   1);
++		}
++	} else {
++		DWC_FREE(pcd->setup_pkt);
++		DWC_FREE(pcd->status_buf);
++	}
++	DWC_SPINLOCK_FREE(pcd->lock);
++	/* Set core_if's lock pointer to NULL */
++	pcd->core_if->lock = NULL;
++
++	DWC_TASK_FREE(pcd->start_xfer_tasklet);
++	DWC_TASK_FREE(pcd->test_mode_tasklet);
++	if (pcd->core_if->core_params->dev_out_nak) {
++		for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++			if (pcd->core_if->ep_xfer_timer[i]) {
++					DWC_TIMER_FREE(pcd->core_if->ep_xfer_timer[i]);
++			}
++		}
++	}
++
++/* Release the CFI object's dynamic memory */
++#ifdef DWC_UTE_CFI
++	if (pcd->cfi->ops.release) {
++		pcd->cfi->ops.release(pcd->cfi);
++	}
++#endif
++
++	DWC_FREE(pcd);
++}
++
++/**
++ * Returns whether registered pcd is dual speed or not
++ */
++uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) ||
++	    ((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (core_if->core_params->ulpi_fs_ls))) {
++		return 0;
++	}
++
++	return 1;
++}
++
++/**
++ * Returns whether registered pcd is OTG capable or not
++ */
++uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	gusbcfg_data_t usbcfg = {.d32 = 0 };
++
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) {
++		return 0;
++	}
++
++	return 1;
++}
++
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if)
++{
++	uint32_t TxMsk = 1;
++	int i;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) {
++		if ((TxMsk & core_if->tx_msk) == 0) {
++			core_if->tx_msk |= TxMsk;
++			return i + 1;
++		}
++		TxMsk <<= 1;
++	}
++	return 0;
++}
++
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if)
++{
++	uint32_t PerTxMsk = 1;
++	int i;
++	for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) {
++		if ((PerTxMsk & core_if->p_tx_msk) == 0) {
++			core_if->p_tx_msk |= PerTxMsk;
++			return i + 1;
++		}
++		PerTxMsk <<= 1;
++	}
++	return 0;
++}
++
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if,
++				  uint32_t fifo_num)
++{
++	core_if->p_tx_msk =
++	    (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
++}
++
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num)
++{
++	core_if->tx_msk =
++	    (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
++}
++
++/**
++ * This function is being called from gadget 
++ * to enable PCD endpoint.
++ */
++int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd,
++			  const uint8_t * ep_desc, void *usb_ep)
++{
++	int num, dir;
++	dwc_otg_pcd_ep_t *ep = NULL;
++	const usb_endpoint_descriptor_t *desc;
++	dwc_irqflags_t flags;
++	fifosize_data_t dptxfsiz = {.d32 = 0 };
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 };
++	int retval = 0;
++	int i, epcount;
++
++	desc = (const usb_endpoint_descriptor_t *)ep_desc;
++
++	if (!desc) {
++		pcd->ep0.priv = usb_ep;
++		ep = &pcd->ep0;
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	num = UE_GET_ADDR(desc->bEndpointAddress);
++	dir = UE_GET_DIR(desc->bEndpointAddress);
++
++	if (!desc->wMaxPacketSize) {
++		DWC_WARN("bad maxpacketsize\n");
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	if (dir == UE_DIR_IN) {
++		epcount = pcd->core_if->dev_if->num_in_eps;
++		for (i = 0; i < epcount; i++) {
++			if (num == pcd->in_ep[i].dwc_ep.num) {
++				ep = &pcd->in_ep[i];
++				break;
++			}
++		}
++	} else {
++		epcount = pcd->core_if->dev_if->num_out_eps;
++		for (i = 0; i < epcount; i++) {
++			if (num == pcd->out_ep[i].dwc_ep.num) {
++				ep = &pcd->out_ep[i];
++				break;
++			}
++		}
++	}
++
++	if (!ep) {
++		DWC_WARN("bad address\n");
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	ep->desc = desc;
++	ep->priv = usb_ep;
++
++	/*
++	 * Activate the EP
++	 */
++	ep->stopped = 0;
++
++	ep->dwc_ep.is_in = (dir == UE_DIR_IN);
++	ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize);
++
++	ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE;
++
++	if (ep->dwc_ep.is_in) {
++		if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			ep->dwc_ep.tx_fifo_num = 0;
++
++			if (ep->dwc_ep.type == UE_ISOCHRONOUS) {
++				/*
++				 * if ISOC EP then assign a Periodic Tx FIFO.
++				 */
++				ep->dwc_ep.tx_fifo_num =
++				    assign_perio_tx_fifo(GET_CORE_IF(pcd));
++			}
++		} else {
++			/*
++			 * if Dedicated FIFOs mode is on then assign a Tx FIFO.
++			 */
++			ep->dwc_ep.tx_fifo_num =
++			    assign_tx_fifo(GET_CORE_IF(pcd));
++		}
++
++		/* Calculating EP info controller base address */
++		if (ep->dwc_ep.tx_fifo_num
++		    && GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			gdfifocfg.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->
++					   core_global_regs->gdfifocfg);
++			gdfifocfgbase.d32 = gdfifocfg.d32 >> 16;
++			dptxfsiz.d32 =
++			    (DWC_READ_REG32
++			     (&GET_CORE_IF(pcd)->core_global_regs->
++			      dtxfsiz[ep->dwc_ep.tx_fifo_num - 1]) >> 16);
++			gdfifocfg.b.epinfobase =
++			    gdfifocfgbase.d32 + dptxfsiz.d32;
++			if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) {
++				DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
++						core_global_regs->gdfifocfg,
++						gdfifocfg.d32);
++			}
++		}
++	}
++	/* Set initial data PID. */
++	if (ep->dwc_ep.type == UE_BULK) {
++		ep->dwc_ep.data_pid_start = 0;
++	}
++
++	/* Alloc DMA Descriptors */
++	if (GET_CORE_IF(pcd)->dma_desc_enable) {
++#ifndef DWC_UTE_PER_IO
++		if (ep->dwc_ep.type != UE_ISOCHRONOUS) {
++#endif
++			ep->dwc_ep.desc_addr =
++			    dwc_otg_ep_alloc_desc_chain(&ep->
++							dwc_ep.dma_desc_addr,
++							MAX_DMA_DESC_CNT);
++			if (!ep->dwc_ep.desc_addr) {
++				DWC_WARN("%s, can't allocate DMA descriptor\n",
++					 __func__);
++				retval = -DWC_E_SHUTDOWN;
++				DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++				goto out;
++			}
++#ifndef DWC_UTE_PER_IO
++		}
++#endif
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n",
++		    (ep->dwc_ep.is_in ? "IN" : "OUT"),
++		    ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
++#ifdef DWC_UTE_PER_IO
++	ep->dwc_ep.xiso_bInterval = 1 << (ep->desc->bInterval - 1);
++#endif
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		ep->dwc_ep.bInterval = 1 << (ep->desc->bInterval - 1);
++		ep->dwc_ep.frame_num = 0xFFFFFFFF;
++	}	 	
++
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++
++#ifdef DWC_UTE_CFI
++	if (pcd->cfi->ops.ep_enable) {
++		pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep);
++	}
++#endif
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++out:
++	return retval;
++}
++
++/**
++ * This function is being called from gadget 
++ * to disable PCD endpoint.
++ */
++int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	dwc_otg_dev_dma_desc_t *desc_addr;
++	dwc_dma_t dma_desc_addr;
++	gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 };
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	fifosize_data_t dptxfsiz = {.d32 = 0 };
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if (!ep || !ep->desc) {
++		DWC_DEBUGPL(DBG_PCD, "bad ep address\n");
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	dwc_otg_request_nuke(ep);
++
++	dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	if (pcd->core_if->core_params->dev_out_nak) {
++		DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[ep->dwc_ep.num]);
++		pcd->core_if->ep_xfer_info[ep->dwc_ep.num].state = 0;
++	}
++	ep->desc = NULL;
++	ep->stopped = 1;
++
++	gdfifocfg.d32 =
++	    DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg);
++	gdfifocfgbase.d32 = gdfifocfg.d32 >> 16;
++
++	if (ep->dwc_ep.is_in) {
++		if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			/* Flush the Tx FIFO */
++			dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd),
++					      ep->dwc_ep.tx_fifo_num);
++		}
++		release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num);
++		release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num);
++		if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			/* Decreasing EPinfo Base Addr */
++			dptxfsiz.d32 =
++			    (DWC_READ_REG32
++			     (&GET_CORE_IF(pcd)->
++		      		core_global_regs->dtxfsiz[ep->dwc_ep.tx_fifo_num-1]) >> 16);
++			gdfifocfg.b.epinfobase = gdfifocfgbase.d32 - dptxfsiz.d32;
++			if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) {
++				DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg,
++					gdfifocfg.d32);
++			}
++		}
++	}
++
++	/* Free DMA Descriptors */
++	if (GET_CORE_IF(pcd)->dma_desc_enable) {
++		if (ep->dwc_ep.type != UE_ISOCHRONOUS) {
++			desc_addr = ep->dwc_ep.desc_addr;
++			dma_desc_addr = ep->dwc_ep.dma_desc_addr;
++
++			/* Cannot call dma_free_coherent() with IRQs disabled */
++			DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++			dwc_otg_ep_free_desc_chain(desc_addr, dma_desc_addr,
++						   MAX_DMA_DESC_CNT);
++
++			goto out_unlocked;
++		}
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++out_unlocked:
++	DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num,
++		    ep->dwc_ep.is_in ? "IN" : "OUT");
++	return 0;
++
++}
++
++/******************************************************************************/
++#ifdef DWC_UTE_PER_IO
++
++/**
++ * Free the request and its extended parts
++ *
++ */
++void dwc_pcd_xiso_ereq_free(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req)
++{
++	DWC_FREE(req->ext_req.per_io_frame_descs);
++	DWC_FREE(req);
++}
++
++/**
++ * Start the next request in the endpoint's queue.
++ *
++ */
++int dwc_otg_pcd_xiso_start_next_request(dwc_otg_pcd_t * pcd,
++					dwc_otg_pcd_ep_t * ep)
++{
++	int i;
++	dwc_otg_pcd_request_t *req = NULL;
++	dwc_ep_t *dwcep = NULL;
++	struct dwc_iso_xreq_port *ereq = NULL;
++	struct dwc_iso_pkt_desc_port *ddesc_iso;
++	uint16_t nat;
++	depctl_data_t diepctl;
++
++	dwcep = &ep->dwc_ep;
++
++	if (dwcep->xiso_active_xfers > 0) {
++#if 0	//Disable this to decrease s/w overhead that is crucial for Isoc transfers
++		DWC_WARN("There are currently active transfers for EP%d \
++				(active=%d; queued=%d)", dwcep->num, dwcep->xiso_active_xfers, 
++				dwcep->xiso_queued_xfers);
++#endif
++		return 0;
++	}
++
++	nat = UGETW(ep->desc->wMaxPacketSize);
++	nat = (nat >> 11) & 0x03;
++
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		ereq = &req->ext_req;
++		ep->stopped = 0;
++
++		/* Get the frame number */
++		dwcep->xiso_frame_num =
++		    dwc_otg_get_frame_number(GET_CORE_IF(pcd));
++		DWC_DEBUG("FRM_NUM=%d", dwcep->xiso_frame_num);
++
++		ddesc_iso = ereq->per_io_frame_descs;
++
++		if (dwcep->is_in) {
++			/* Setup DMA Descriptor chain for IN Isoc request */
++			for (i = 0; i < ereq->pio_pkt_count; i++) {
++				//if ((i % (nat + 1)) == 0)
++				if ( i > 0 )
++					dwcep->xiso_frame_num =
++					    (dwcep->xiso_bInterval +
++										dwcep->xiso_frame_num) & 0x3FFF;
++				dwcep->desc_addr[i].buf =
++				    req->dma + ddesc_iso[i].offset;
++				dwcep->desc_addr[i].status.b_iso_in.txbytes =
++				    ddesc_iso[i].length;
++				dwcep->desc_addr[i].status.b_iso_in.framenum =
++				    dwcep->xiso_frame_num;
++				dwcep->desc_addr[i].status.b_iso_in.bs =
++				    BS_HOST_READY;
++				dwcep->desc_addr[i].status.b_iso_in.txsts = 0;
++				dwcep->desc_addr[i].status.b_iso_in.sp =
++				    (ddesc_iso[i].length %
++				     dwcep->maxpacket) ? 1 : 0;
++				dwcep->desc_addr[i].status.b_iso_in.ioc = 0;
++				dwcep->desc_addr[i].status.b_iso_in.pid = nat + 1;
++				dwcep->desc_addr[i].status.b_iso_in.l = 0;
++
++				/* Process the last descriptor */
++				if (i == ereq->pio_pkt_count - 1) {
++					dwcep->desc_addr[i].status.b_iso_in.ioc = 1;
++					dwcep->desc_addr[i].status.b_iso_in.l = 1;
++				}
++			}
++
++			/* Setup and start the transfer for this endpoint */
++			dwcep->xiso_active_xfers++;
++			DWC_WRITE_REG32(&GET_CORE_IF(pcd)->dev_if->
++					in_ep_regs[dwcep->num]->diepdma,
++					dwcep->dma_desc_addr);
++			diepctl.d32 = 0;
++			diepctl.b.epena = 1;
++			diepctl.b.cnak = 1;
++			DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->dev_if->
++					 in_ep_regs[dwcep->num]->diepctl, 0,
++					 diepctl.d32);
++		} else {
++			/* Setup DMA Descriptor chain for OUT Isoc request */
++			for (i = 0; i < ereq->pio_pkt_count; i++) {
++				//if ((i % (nat + 1)) == 0)
++				dwcep->xiso_frame_num = (dwcep->xiso_bInterval + 
++										dwcep->xiso_frame_num) & 0x3FFF;
++				dwcep->desc_addr[i].buf =
++				    req->dma + ddesc_iso[i].offset;
++				dwcep->desc_addr[i].status.b_iso_out.rxbytes =
++				    ddesc_iso[i].length;
++				dwcep->desc_addr[i].status.b_iso_out.framenum =
++				    dwcep->xiso_frame_num;
++				dwcep->desc_addr[i].status.b_iso_out.bs =
++				    BS_HOST_READY;
++				dwcep->desc_addr[i].status.b_iso_out.rxsts = 0;
++				dwcep->desc_addr[i].status.b_iso_out.sp =
++				    (ddesc_iso[i].length %
++				     dwcep->maxpacket) ? 1 : 0;
++				dwcep->desc_addr[i].status.b_iso_out.ioc = 0;
++				dwcep->desc_addr[i].status.b_iso_out.pid = nat + 1;
++				dwcep->desc_addr[i].status.b_iso_out.l = 0;
++				
++				/* Process the last descriptor */
++				if (i == ereq->pio_pkt_count - 1) {
++					dwcep->desc_addr[i].status.b_iso_out.ioc = 1;
++					dwcep->desc_addr[i].status.b_iso_out.l = 1;
++				}			
++			}
++			
++			/* Setup and start the transfer for this endpoint */
++			dwcep->xiso_active_xfers++;
++			DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
++					dev_if->out_ep_regs[dwcep->num]->
++					doepdma, dwcep->dma_desc_addr);
++			diepctl.d32 = 0;
++			diepctl.b.epena = 1;
++			diepctl.b.cnak = 1;
++			DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
++					 dev_if->out_ep_regs[dwcep->num]->
++					 doepctl, 0, diepctl.d32);
++		}
++
++	} else {
++		ep->stopped = 1;
++	}
++
++	return 0;
++}
++
++/**
++ *	- Remove the request from the queue
++ */
++void complete_xiso_ep(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_pcd_request_t *req = NULL;
++	struct dwc_iso_xreq_port *ereq = NULL;
++	struct dwc_iso_pkt_desc_port *ddesc_iso = NULL;
++	dwc_ep_t *dwcep = NULL;
++	int i;
++
++	//DWC_DEBUG();
++	dwcep = &ep->dwc_ep;
++
++	/* Get the first pending request from the queue */
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		if (!req) {
++			DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
++			return;
++		}
++		dwcep->xiso_active_xfers--;
++		dwcep->xiso_queued_xfers--;
++		/* Remove this request from the queue */
++		DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry);
++	} else {
++		DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
++		return;
++	}
++
++	ep->stopped = 1;
++	ereq = &req->ext_req;
++	ddesc_iso = ereq->per_io_frame_descs;
++
++	if (dwcep->xiso_active_xfers < 0) {
++		DWC_WARN("EP#%d (xiso_active_xfers=%d)", dwcep->num,
++			 dwcep->xiso_active_xfers);
++	}
++
++	/* Fill the Isoc descs of portable extended req from dma descriptors */
++	for (i = 0; i < ereq->pio_pkt_count; i++) {
++		if (dwcep->is_in) {	/* IN endpoints */
++			ddesc_iso[i].actual_length = ddesc_iso[i].length -
++			    dwcep->desc_addr[i].status.b_iso_in.txbytes;
++			ddesc_iso[i].status =
++			    dwcep->desc_addr[i].status.b_iso_in.txsts;
++		} else {	/* OUT endpoints */
++			ddesc_iso[i].actual_length = ddesc_iso[i].length -
++			    dwcep->desc_addr[i].status.b_iso_out.rxbytes;
++			ddesc_iso[i].status =
++			    dwcep->desc_addr[i].status.b_iso_out.rxsts;
++		}
++	}
++
++	DWC_SPINUNLOCK(ep->pcd->lock);
++
++	/* Call the completion function in the non-portable logic */
++	ep->pcd->fops->xisoc_complete(ep->pcd, ep->priv, req->priv, 0,
++				      &req->ext_req);
++
++	DWC_SPINLOCK(ep->pcd->lock);
++
++	/* Free the request - specific freeing needed for extended request object */
++	dwc_pcd_xiso_ereq_free(ep, req);
++
++	/* Start the next request */
++	dwc_otg_pcd_xiso_start_next_request(ep->pcd, ep);
++
++	return;
++}
++
++/**
++ * Create and initialize the Isoc pkt descriptors of the extended request.
++ *
++ */
++static int dwc_otg_pcd_xiso_create_pkt_descs(dwc_otg_pcd_request_t * req,
++					     void *ereq_nonport,
++					     int atomic_alloc)
++{
++	struct dwc_iso_xreq_port *ereq = NULL;
++	struct dwc_iso_xreq_port *req_mapped = NULL;
++	struct dwc_iso_pkt_desc_port *ipds = NULL;	/* To be created in this function */
++	uint32_t pkt_count;
++	int i;
++
++	ereq = &req->ext_req;
++	req_mapped = (struct dwc_iso_xreq_port *)ereq_nonport;
++	pkt_count = req_mapped->pio_pkt_count;
++
++	/* Create the isoc descs */
++	if (atomic_alloc) {
++		ipds = DWC_ALLOC_ATOMIC(sizeof(*ipds) * pkt_count);
++	} else {
++		ipds = DWC_ALLOC(sizeof(*ipds) * pkt_count);
++	}
++
++	if (!ipds) {
++		DWC_ERROR("Failed to allocate isoc descriptors");
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Initialize the extended request fields */
++	ereq->per_io_frame_descs = ipds;
++	ereq->error_count = 0;
++	ereq->pio_alloc_pkt_count = pkt_count;
++	ereq->pio_pkt_count = pkt_count;
++	ereq->tr_sub_flags = req_mapped->tr_sub_flags;
++
++	/* Init the Isoc descriptors */
++	for (i = 0; i < pkt_count; i++) {
++		ipds[i].length = req_mapped->per_io_frame_descs[i].length;
++		ipds[i].offset = req_mapped->per_io_frame_descs[i].offset;
++		ipds[i].status = req_mapped->per_io_frame_descs[i].status;	/* 0 */
++		ipds[i].actual_length =
++		    req_mapped->per_io_frame_descs[i].actual_length;
++	}
++
++	return 0;
++}
++
++static void prn_ext_request(struct dwc_iso_xreq_port *ereq)
++{
++	struct dwc_iso_pkt_desc_port *xfd = NULL;
++	int i;
++
++	DWC_DEBUG("per_io_frame_descs=%p", ereq->per_io_frame_descs);
++	DWC_DEBUG("tr_sub_flags=%d", ereq->tr_sub_flags);
++	DWC_DEBUG("error_count=%d", ereq->error_count);
++	DWC_DEBUG("pio_alloc_pkt_count=%d", ereq->pio_alloc_pkt_count);
++	DWC_DEBUG("pio_pkt_count=%d", ereq->pio_pkt_count);
++	DWC_DEBUG("res=%d", ereq->res);
++
++	for (i = 0; i < ereq->pio_pkt_count; i++) {
++		xfd = &ereq->per_io_frame_descs[0];
++		DWC_DEBUG("FD #%d", i);
++
++		DWC_DEBUG("xfd->actual_length=%d", xfd->actual_length);
++		DWC_DEBUG("xfd->length=%d", xfd->length);
++		DWC_DEBUG("xfd->offset=%d", xfd->offset);
++		DWC_DEBUG("xfd->status=%d", xfd->status);
++	}
++}
++
++/**
++ *
++ */
++int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++			      uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen,
++			      int zero, void *req_handle, int atomic_alloc,
++			      void *ereq_nonport)
++{
++	dwc_otg_pcd_request_t *req = NULL;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	int res;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	/* We support this extension only for DDMA mode */
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC)
++		if (!GET_CORE_IF(pcd)->dma_desc_enable)
++			return -DWC_E_INVALID;
++
++	/* Create a dwc_otg_pcd_request_t object */
++	if (atomic_alloc) {
++		req = DWC_ALLOC_ATOMIC(sizeof(*req));
++	} else {
++		req = DWC_ALLOC(sizeof(*req));
++	}
++
++	if (!req) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Create the Isoc descs for this request which shall be the exact match
++	 * of the structure sent to us from the non-portable logic */
++	res =
++	    dwc_otg_pcd_xiso_create_pkt_descs(req, ereq_nonport, atomic_alloc);
++	if (res) {
++		DWC_WARN("Failed to init the Isoc descriptors");
++		DWC_FREE(req);
++		return res;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry);
++	req->buf = buf;
++	req->dma = dma_buf;
++	req->length = buflen;
++	req->sent_zlp = zero;
++	req->priv = req_handle;
++
++	//DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	ep->dwc_ep.dma_addr = dma_buf;
++	ep->dwc_ep.start_xfer_buff = buf;
++	ep->dwc_ep.xfer_buff = buf;
++	ep->dwc_ep.xfer_len = 0;
++	ep->dwc_ep.xfer_count = 0;
++	ep->dwc_ep.sent_zlp = 0;
++	ep->dwc_ep.total_len = buflen;
++
++	/* Add this request to the tail */
++	DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
++	ep->dwc_ep.xiso_queued_xfers++;
++
++//DWC_DEBUG("CP_0");
++//DWC_DEBUG("req->ext_req.tr_sub_flags=%d", req->ext_req.tr_sub_flags);
++//prn_ext_request((struct dwc_iso_xreq_port *) ereq_nonport);
++//prn_ext_request(&req->ext_req);
++
++	//DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	/* If the req->status == ASAP  then check if there is any active transfer
++	 * for this endpoint. If no active transfers, then get the first entry
++	 * from the queue and start that transfer
++	 */
++	if (req->ext_req.tr_sub_flags == DWC_EREQ_TF_ASAP) {
++		res = dwc_otg_pcd_xiso_start_next_request(pcd, ep);
++		if (res) {
++			DWC_WARN("Failed to start the next Isoc transfer");
++			DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++			DWC_FREE(req);
++			return res;
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++	return 0;
++}
++
++#endif
++/* END ifdef DWC_UTE_PER_IO ***************************************************/
++int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++			 uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen,
++			 int zero, void *req_handle, int atomic_alloc)
++{
++	dwc_irqflags_t flags;
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++	uint32_t max_transfer;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (atomic_alloc) {
++		req = DWC_ALLOC_ATOMIC(sizeof(*req));
++	} else {
++		req = DWC_ALLOC(sizeof(*req));
++	}
++
++	if (!req) {
++		return -DWC_E_NO_MEMORY;
++	}
++	DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry);
++	if (!GET_CORE_IF(pcd)->core_params->opt) {
++		if (ep->dwc_ep.num != 0) {
++			DWC_ERROR("queue req %p, len %d buf %p\n",
++				  req_handle, buflen, buf);
++		}
++	}
++
++	req->buf = buf;
++	req->dma = dma_buf;
++	req->length = buflen;
++	req->sent_zlp = zero;
++	req->priv = req_handle;
++	req->dw_align_buf = NULL;
++	if ((dma_buf & 0x3) && GET_CORE_IF(pcd)->dma_enable
++			&& !GET_CORE_IF(pcd)->dma_desc_enable)
++		req->dw_align_buf = DWC_DMA_ALLOC(buflen,
++				 &req->dw_align_buf_dma);
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	/*
++	 * After adding request to the queue for IN ISOC wait for In Token Received
++	 * when TX FIFO is empty interrupt and for OUT ISOC wait for OUT Token 
++	 * Received when EP is disabled interrupt to obtain starting microframe
++	 * (odd/even) start transfer
++	 */
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		if (req != 0) {
++			depctl_data_t depctl = {.d32 =
++				    DWC_READ_REG32(&pcd->core_if->dev_if->
++						   in_ep_regs[ep->dwc_ep.num]->
++						   diepctl) };
++			++pcd->request_pending;
++
++			DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
++			if (ep->dwc_ep.is_in) {
++				depctl.b.cnak = 1;
++				DWC_WRITE_REG32(&pcd->core_if->dev_if->
++						in_ep_regs[ep->dwc_ep.num]->
++						diepctl, depctl.d32);
++			}
++			
++			DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		}
++		return 0;
++	}
++
++	/*
++	 * For EP0 IN without premature status, zlp is required?
++	 */
++	if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
++		DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num);
++		//_req->zero = 1;
++	}
++
++	/* Start the transfer */
++	if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) {
++		/* EP0 Transfer? */
++		if (ep->dwc_ep.num == 0) {
++			switch (pcd->ep0state) {
++			case EP0_IN_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++					    "%s ep0: EP0_IN_DATA_PHASE\n",
++					    __func__);
++				break;
++
++			case EP0_OUT_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++					    "%s ep0: EP0_OUT_DATA_PHASE\n",
++					    __func__);
++				if (pcd->request_config) {
++					/* Complete STATUS PHASE */
++					ep->dwc_ep.is_in = 1;
++					pcd->ep0state = EP0_IN_STATUS_PHASE;
++				}
++				break;
++
++			case EP0_IN_STATUS_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++					    "%s ep0: EP0_IN_STATUS_PHASE\n",
++					    __func__);
++				break;
++
++			default:
++				DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
++					    pcd->ep0state);
++				DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++				return -DWC_E_SHUTDOWN;
++			}
++
++			ep->dwc_ep.dma_addr = dma_buf;
++			ep->dwc_ep.start_xfer_buff = buf;
++			ep->dwc_ep.xfer_buff = buf;
++			ep->dwc_ep.xfer_len = buflen;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			if (zero) {
++				if ((ep->dwc_ep.xfer_len %
++				     ep->dwc_ep.maxpacket == 0)
++				    && (ep->dwc_ep.xfer_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++
++			dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd),
++						   &ep->dwc_ep);
++		}		// non-ep0 endpoints
++		else {
++#ifdef DWC_UTE_CFI
++			if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++				/* store the request length */
++				ep->dwc_ep.cfi_req_len = buflen;
++				pcd->cfi->ops.build_descriptors(pcd->cfi, pcd,
++								ep, req);
++			} else {
++#endif
++				max_transfer =
++				    GET_CORE_IF(ep->pcd)->core_params->
++				    max_transfer_size;
++
++				/* Setup and start the Transfer */
++				if (req->dw_align_buf){
++					if (ep->dwc_ep.is_in)
++						dwc_memcpy(req->dw_align_buf,
++							   buf, buflen);
++					ep->dwc_ep.dma_addr =
++					    req->dw_align_buf_dma;
++					ep->dwc_ep.start_xfer_buff =
++					    req->dw_align_buf;
++					ep->dwc_ep.xfer_buff =
++					    req->dw_align_buf;
++				} else {
++					ep->dwc_ep.dma_addr = dma_buf;
++					ep->dwc_ep.start_xfer_buff = buf;
++                                        ep->dwc_ep.xfer_buff = buf;	
++				}
++				ep->dwc_ep.xfer_len = 0;
++				ep->dwc_ep.xfer_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++				ep->dwc_ep.total_len = buflen;
++
++				ep->dwc_ep.maxxfer = max_transfer;
++				if (GET_CORE_IF(pcd)->dma_desc_enable) {
++					uint32_t out_max_xfer =
++					    DDMA_MAX_TRANSFER_SIZE -
++					    (DDMA_MAX_TRANSFER_SIZE % 4);
++					if (ep->dwc_ep.is_in) {
++						if (ep->dwc_ep.maxxfer >
++						    DDMA_MAX_TRANSFER_SIZE) {
++							ep->dwc_ep.maxxfer =
++							    DDMA_MAX_TRANSFER_SIZE;
++						}
++					} else {
++						if (ep->dwc_ep.maxxfer >
++						    out_max_xfer) {
++							ep->dwc_ep.maxxfer =
++							    out_max_xfer;
++						}
++					}
++				}
++				if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) {
++					ep->dwc_ep.maxxfer -=
++					    (ep->dwc_ep.maxxfer %
++					     ep->dwc_ep.maxpacket);
++				}
++
++				if (zero) {
++					if ((ep->dwc_ep.total_len %
++					     ep->dwc_ep.maxpacket == 0)
++					    && (ep->dwc_ep.total_len != 0)) {
++						ep->dwc_ep.sent_zlp = 1;
++					}
++				}
++#ifdef DWC_UTE_CFI
++			}
++#endif
++			dwc_otg_ep_start_transfer(GET_CORE_IF(pcd),
++						  &ep->dwc_ep);
++		}
++	}
++
++	if (req != 0) {
++		++pcd->request_pending;
++		DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
++		if (ep->dwc_ep.is_in && ep->stopped
++		    && !(GET_CORE_IF(pcd)->dma_enable)) {
++			/** @todo NGS Create a function for this. */
++			diepmsk_data_t diepmsk = {.d32 = 0 };
++			diepmsk.b.intktxfemp = 1;
++			if (GET_CORE_IF(pcd)->multiproc_int_enable) {
++				DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
++						 dev_if->dev_global_regs->diepeachintmsk
++						 [ep->dwc_ep.num], 0,
++						 diepmsk.d32);
++			} else {
++				DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
++						 dev_if->dev_global_regs->
++						 diepmsk, 0, diepmsk.d32);
++			}
++
++		}
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return 0;
++}
++
++int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle,
++			   void *req_handle)
++{
++	dwc_irqflags_t flags;
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) {
++		DWC_WARN("bad argument\n");
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	/* make sure it's actually queued on this endpoint */
++	DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) {
++		if (req->priv == (void *)req_handle) {
++			break;
++		}
++	}
++
++	if (req->priv != (void *)req_handle) {
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		return -DWC_E_INVALID;
++	}
++
++	if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) {
++		dwc_otg_request_done(ep, req, -DWC_E_RESTART);
++	} else {
++		req = NULL;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return req ? 0 : -DWC_E_SHUTDOWN;
++
++}
++
++/**
++ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests
++ *
++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
++ * requests. If the gadget driver clears the halt status, it will
++ * automatically unwedge the endpoint.
++ *
++ * Returns zero on success, else negative DWC error code.
++ */
++int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	int retval = 0;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if ((!ep->desc && ep != &pcd->ep0) ||
++	    (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num,
++			 ep->dwc_ep.is_in ? "IN" : "OUT");
++		retval = -DWC_E_AGAIN;
++	} else {
++                /* This code needs to be reviewed */
++		if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) {
++			dtxfsts_data_t txstatus;
++			fifosize_data_t txfifosize;
++
++			txfifosize.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->
++					   core_global_regs->dtxfsiz[ep->dwc_ep.
++								     tx_fifo_num]);
++			txstatus.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->
++					   dev_if->in_ep_regs[ep->dwc_ep.num]->
++					   dtxfsts);
++
++			if (txstatus.b.txfspcavail < txfifosize.b.depth) {
++				DWC_WARN("%s() Data In Tx Fifo\n", __func__);
++				retval = -DWC_E_AGAIN;
++			} else {
++				if (ep->dwc_ep.num == 0) {
++					pcd->ep0state = EP0_STALL;
++				}
++
++				ep->stopped = 1;
++				dwc_otg_ep_set_stall(GET_CORE_IF(pcd),
++						     &ep->dwc_ep);
++			}
++		} else {
++			if (ep->dwc_ep.num == 0) {
++				pcd->ep0state = EP0_STALL;
++			}
++
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return retval;
++}
++   
++int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	int retval = 0;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if (!ep || (!ep->desc && ep != &pcd->ep0) ||
++	    (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num,
++			 ep->dwc_ep.is_in ? "IN" : "OUT");
++		retval = -DWC_E_AGAIN;
++	} else if (value == 0) {
++		dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++	} else if (value == 1) {
++		if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) {
++			dtxfsts_data_t txstatus;
++			fifosize_data_t txfifosize;
++
++			txfifosize.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->
++					   dtxfsiz[ep->dwc_ep.tx_fifo_num]);
++			txstatus.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
++					   in_ep_regs[ep->dwc_ep.num]->dtxfsts);
++
++			if (txstatus.b.txfspcavail < txfifosize.b.depth) {
++				DWC_WARN("%s() Data In Tx Fifo\n", __func__);
++				retval = -DWC_E_AGAIN;
++			} else {
++				if (ep->dwc_ep.num == 0) {
++					pcd->ep0state = EP0_STALL;
++				}
++
++				ep->stopped = 1;
++				dwc_otg_ep_set_stall(GET_CORE_IF(pcd),
++						     &ep->dwc_ep);
++			}
++		} else {
++			if (ep->dwc_ep.num == 0) {
++				pcd->ep0state = EP0_STALL;
++			}
++
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++	} else if (value == 2) {
++		ep->dwc_ep.stall_clear_flag = 0;
++	} else if (value == 3) {
++		ep->dwc_ep.stall_clear_flag = 1;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return retval;
++}
++
++/**
++ * This function initiates remote wakeup of the host from suspend state.
++ */
++void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set)
++{
++	dctl_data_t dctl = { 0 };
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dsts_data_t dsts;
++
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++	if (!dsts.b.suspsts) {
++		DWC_WARN("Remote wakeup while is not in suspend state\n");
++	}
++	/* Check if DEVICE_REMOTE_WAKEUP feature enabled */
++	if (pcd->remote_wakeup_enable) {
++		if (set) {
++
++			if (core_if->adp_enable) {
++				gpwrdn_data_t gpwrdn;
++
++				dwc_otg_adp_probe_stop(core_if);
++
++				/* Mask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gpwrdn,
++						 gpwrdn.d32, 0);
++
++				/* Disable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gpwrdn,
++						 gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Device mode.
++				 */
++				core_if->op_state = B_PERIPHERAL;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_pcd_start(core_if);
++
++				dwc_otg_initiate_srp(core_if);
++			}
++
++			dctl.b.rmtwkupsig = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, 0, dctl.d32);
++			DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
++
++			dwc_mdelay(2);
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, dctl.d32, 0);
++			DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
++		}
++	} else {
++		DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
++	}
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * This function initiates remote wakeup of the host from L1 sleep state.
++ */
++void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set)
++{
++	glpmcfg_data_t lpmcfg;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++
++	/* Check if we are in L1 state */
++	if (!lpmcfg.b.prt_sleep_sts) {
++		DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n");
++		return;
++	}
++
++	/* Check if host allows remote wakeup */
++	if (!lpmcfg.b.rem_wkup_en) {
++		DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n");
++		return;
++	}
++
++	/* Check if Resume OK */
++	if (!lpmcfg.b.sleep_state_resumeok) {
++		DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n");
++		return;
++	}
++
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.en_utmi_sleep = 0;
++	lpmcfg.b.hird_thres &= (~(1 << 4));
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++
++	if (set) {
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.b.rmtwkupsig = 1;
++		/* Set RmtWkUpSig bit to start remote wakup signaling.
++		 * Hardware will automatically clear this bit.
++		 */
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl,
++				 0, dctl.d32);
++		DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
++	}
++
++}
++#endif
++
++/**
++ * Performs remote wakeup.
++ */
++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_irqflags_t flags;
++	if (dwc_otg_is_device_mode(core_if)) {
++		DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		if (core_if->lx_state == DWC_OTG_L1) {
++			dwc_otg_pcd_rem_wkup_from_sleep(pcd, set);
++		} else {
++#endif
++			dwc_otg_pcd_rem_wkup_from_suspend(pcd, set);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		}
++#endif
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++	}
++	return;
++}
++
++void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dctl_data_t dctl = { 0 };
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		dctl.b.sftdiscon = 1;
++		DWC_PRINTF("Soft disconnect for %d useconds\n",no_of_usecs);
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++		dwc_udelay(no_of_usecs);
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32,0);
++		
++	} else{
++		DWC_PRINTF("NOT SUPPORTED IN HOST MODE\n");
++	}
++	return;
++
++}
++
++int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd)
++{
++	dsts_data_t dsts;
++	gotgctl_data_t gotgctl;
++
++	/*
++	 * This function starts the Protocol if no session is in progress. If
++	 * a session is already in progress, but the device is suspended,
++	 * remote wakeup signaling is started.
++	 */
++
++	/* Check if valid session */
++	gotgctl.d32 =
++	    DWC_READ_REG32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
++	if (gotgctl.b.bsesvld) {
++		/* Check if suspend state */
++		dsts.d32 =
++		    DWC_READ_REG32(&
++				   (GET_CORE_IF(pcd)->dev_if->
++				    dev_global_regs->dsts));
++		if (dsts.b.suspsts) {
++			dwc_otg_pcd_remote_wakeup(pcd, 1);
++		}
++	} else {
++		dwc_otg_pcd_initiate_srp(pcd);
++	}
++
++	return 0;
++
++}
++
++/**
++ * Start the SRP timer to detect when the SRP does not complete within
++ * 6 seconds.
++ *
++ * @param pcd the pcd structure.
++ */
++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd)
++{
++	dwc_irqflags_t flags;
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	dwc_otg_initiate_srp(GET_CORE_IF(pcd));
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++}
++
++int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd)
++{
++	return dwc_otg_get_frame_number(GET_CORE_IF(pcd));
++}
++
++int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd)
++{
++	return GET_CORE_IF(pcd)->core_params->lpm_enable;
++}
++
++uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd)
++{
++	return pcd->b_hnp_enable;
++}
++
++uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd)
++{
++	return pcd->a_hnp_support;
++}
++
++uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd)
++{
++	return pcd->a_alt_hnp_support;
++}
++
++int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd)
++{
++	return pcd->remote_wakeup_enable;
++}
++
++#endif /* DWC_HOST_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,266 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
++ * $Revision: #48 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++#if !defined(__DWC_PCD_H__)
++#define __DWC_PCD_H__
++
++#include "dwc_otg_os_dep.h"
++#include "usb.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_pcd_if.h"
++struct cfiobject;
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Perpherial Contoller Driver (PCD).
++ *
++ * The Peripheral Controller Driver (PCD) for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used. For
++ * the Mass Storage Function driver the File-backed USB Storage Gadget
++ * (FBS) driver will be used.  The FBS driver supports the
++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
++ * transports.
++ *
++ */
++
++/** Invalid DMA Address */
++#define DWC_DMA_ADDR_INVALID	(~(dwc_dma_t)0)
++
++/** Max Transfer size for any EP */
++#define DDMA_MAX_TRANSFER_SIZE 65535
++
++/**
++ * Get the pointer to the core_if from the pcd pointer.
++ */
++#define GET_CORE_IF( _pcd ) (_pcd->core_if)
++
++/**
++ * States of EP0.
++ */
++typedef enum ep0_state {
++	EP0_DISCONNECT,		/* no host */
++	EP0_IDLE,
++	EP0_IN_DATA_PHASE,
++	EP0_OUT_DATA_PHASE,
++	EP0_IN_STATUS_PHASE,
++	EP0_OUT_STATUS_PHASE,
++	EP0_STALL,
++} ep0state_e;
++
++/** Fordward declaration.*/
++struct dwc_otg_pcd;
++
++/** DWC_otg iso request structure.
++ *
++ */
++typedef struct usb_iso_request dwc_otg_pcd_iso_request_t;
++
++#ifdef DWC_UTE_PER_IO
++
++/**
++ * This shall be the exact analogy of the same type structure defined in the
++ * usb_gadget.h. Each descriptor contains
++ */
++struct dwc_iso_pkt_desc_port {
++	uint32_t offset;
++	uint32_t length;	/* expected length */
++	uint32_t actual_length;
++	uint32_t status;
++};
++
++struct dwc_iso_xreq_port {
++	/** transfer/submission flag */
++	uint32_t tr_sub_flags;
++	/** Start the request ASAP */
++#define DWC_EREQ_TF_ASAP		0x00000002
++	/** Just enqueue the request w/o initiating a transfer */
++#define DWC_EREQ_TF_ENQUEUE		0x00000004
++
++	/**
++	* count of ISO packets attached to this request - shall
++	* not exceed the pio_alloc_pkt_count
++	*/
++	uint32_t pio_pkt_count;
++	/** count of ISO packets allocated for this request */
++	uint32_t pio_alloc_pkt_count;
++	/** number of ISO packet errors */
++	uint32_t error_count;
++	/** reserved for future extension */
++	uint32_t res;
++	/** Will be allocated and freed in the UTE gadget and based on the CFC value */
++	struct dwc_iso_pkt_desc_port *per_io_frame_descs;
++};
++#endif
++/** DWC_otg request structure.
++ * This structure is a list of requests.
++ */
++typedef struct dwc_otg_pcd_request {
++	void *priv;
++	void *buf;
++	dwc_dma_t dma;
++	uint32_t length;
++	uint32_t actual;
++	unsigned sent_zlp:1;
++    /**
++     * Used instead of original buffer if
++     * it(physical address) is not dword-aligned.
++     **/
++     uint8_t *dw_align_buf;
++     dwc_dma_t dw_align_buf_dma;
++
++	 DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry;
++#ifdef DWC_UTE_PER_IO
++	struct dwc_iso_xreq_port ext_req;
++	//void *priv_ereq_nport; /*  */
++#endif
++} dwc_otg_pcd_request_t;
++
++DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request);
++
++/**	  PCD EP structure.
++ * This structure describes an EP, there is an array of EPs in the PCD
++ * structure.
++ */
++typedef struct dwc_otg_pcd_ep {
++	/** USB EP Descriptor */
++	const usb_endpoint_descriptor_t *desc;
++
++	/** queue of dwc_otg_pcd_requests. */
++	struct req_list queue;
++	unsigned stopped:1;
++	unsigned disabling:1;
++	unsigned dma:1;
++	unsigned queue_sof:1;
++
++#ifdef DWC_EN_ISOC
++	/** ISOC req handle passed */
++	void *iso_req_handle;
++#endif				//_EN_ISOC_
++
++	/** DWC_otg ep data. */
++	dwc_ep_t dwc_ep;
++
++	/** Pointer to PCD */
++	struct dwc_otg_pcd *pcd;
++
++	void *priv;
++} dwc_otg_pcd_ep_t;
++
++/** DWC_otg PCD Structure.
++ * This structure encapsulates the data for the dwc_otg PCD.
++ */
++struct dwc_otg_pcd {
++	const struct dwc_otg_pcd_function_ops *fops;
++	/** The DWC otg device pointer */
++	struct dwc_otg_device *otg_dev;
++	/** Core Interface */
++	dwc_otg_core_if_t *core_if;
++	/** State of EP0 */
++	ep0state_e ep0state;
++	/** EP0 Request is pending */
++	unsigned ep0_pending:1;
++	/** Indicates when SET CONFIGURATION Request is in process */
++	unsigned request_config:1;
++	/** The state of the Remote Wakeup Enable. */
++	unsigned remote_wakeup_enable:1;
++	/** The state of the B-Device HNP Enable. */
++	unsigned b_hnp_enable:1;
++	/** The state of A-Device HNP Support. */
++	unsigned a_hnp_support:1;
++	/** The state of the A-Device Alt HNP support. */
++	unsigned a_alt_hnp_support:1;
++	/** Count of pending Requests */
++	unsigned request_pending;
++
++	/** SETUP packet for EP0
++	 * This structure is allocated as a DMA buffer on PCD initialization
++	 * with enough space for up to 3 setup packets.
++	 */
++	union {
++		usb_device_request_t req;
++		uint32_t d32[2];
++	} *setup_pkt;
++
++	dwc_dma_t setup_pkt_dma_handle;
++
++	/* Additional buffer and flag for CTRL_WR premature case */
++	uint8_t *backup_buf;
++	unsigned data_terminated;
++
++	/** 2-byte dma buffer used to return status from GET_STATUS */
++	uint16_t *status_buf;
++	dwc_dma_t status_buf_dma_handle;
++
++	/** EP0 */
++	dwc_otg_pcd_ep_t ep0;
++
++	/** Array of IN EPs. */
++	dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1];
++	/** Array of OUT EPs. */
++	dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1];
++	/** number of valid EPs in the above array. */
++//        unsigned      num_eps : 4;
++	dwc_spinlock_t *lock;
++
++	/** Tasklet to defer starting of TEST mode transmissions until
++	 *	Status Phase has been completed.
++	 */
++	dwc_tasklet_t *test_mode_tasklet;
++
++	/** Tasklet to delay starting of xfer in DMA mode */
++	dwc_tasklet_t *start_xfer_tasklet;
++
++	/** The test mode to enter when the tasklet is executed. */
++	unsigned test_mode;
++	/** The cfi_api structure that implements most of the CFI API
++	 * and OTG specific core configuration functionality
++	 */
++#ifdef DWC_UTE_CFI
++	struct cfiobject *cfi;
++#endif
++
++};
++
++//FIXME this functions should be static, and this prototypes should be removed
++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep);
++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep,
++				 dwc_otg_pcd_request_t * req, int32_t status);
++
++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep,
++			     void *req_handle);
++
++extern void do_test_mode(void *data);
++#endif
++#endif /* DWC_HOST_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,360 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $
++ * $Revision: #11 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++#if !defined(__DWC_PCD_IF_H__)
++#define __DWC_PCD_IF_H__
++
++//#include "dwc_os.h"
++#include "dwc_otg_core_if.h"
++
++/** @file
++ * This file defines DWC_OTG PCD Core API.
++ */
++
++struct dwc_otg_pcd;
++typedef struct dwc_otg_pcd dwc_otg_pcd_t;
++
++/** Maxpacket size for EP0 */
++#define MAX_EP0_SIZE	64
++/** Maxpacket size for any EP */
++#define MAX_PACKET_SIZE 1024
++
++/** @name Function Driver Callbacks */
++/** @{ */
++
++/** This function will be called whenever a previously queued request has
++ * completed.  The status value will be set to -DWC_E_SHUTDOWN to indicated a
++ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset,
++ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid
++ * parameters. */
++typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
++				    void *req_handle, int32_t status,
++				    uint32_t actual);
++/**
++ * This function will be called whenever a previousle queued ISOC request has
++ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count
++ * function.
++ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_*
++ * functions.
++ */
++typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
++					 void *req_handle, int proc_buf_num);
++/** This function should handle any SETUP request that cannot be handled by the
++ * PCD Core.  This includes most GET_DESCRIPTORs, SET_CONFIGS, Any
++ * class-specific requests, etc.  The function must non-blocking.
++ *
++ * Returns 0 on success.
++ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported.
++ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes.
++ * Returns -DWC_E_SHUTDOWN on any other error. */
++typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes);
++/** This is called whenever the device has been disconnected.  The function
++ * driver should take appropriate action to clean up all pending requests in the
++ * PCD Core, remove all endpoints (except ep0), and initialize back to reset
++ * state. */
++typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called when device has been connected. */
++typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed);
++/** This function is called when device has been suspended */
++typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called when device has received LPM tokens, i.e.
++ * device has been sent to sleep state. */
++typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called when device has been resumed
++ * from suspend(L2) or L1 sleep state. */
++typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called whenever hnp params has been changed.
++ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions
++ * to get hnp parameters. */
++typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called whenever USB RESET is detected. */
++typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd);
++
++typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes);
++
++/**
++ *
++ * @param ep_handle	Void pointer to the usb_ep structure
++ * @param ereq_port Pointer to the extended request structure created in the
++ *					portable part.
++ */
++typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
++				     void *req_handle, int32_t status,
++				     void *ereq_port);
++/** Function Driver Ops Data Structure */
++struct dwc_otg_pcd_function_ops {
++	dwc_connect_cb_t connect;
++	dwc_disconnect_cb_t disconnect;
++	dwc_setup_cb_t setup;
++	dwc_completion_cb_t complete;
++	dwc_isoc_completion_cb_t isoc_complete;
++	dwc_suspend_cb_t suspend;
++	dwc_sleep_cb_t sleep;
++	dwc_resume_cb_t resume;
++	dwc_reset_cb_t reset;
++	dwc_hnp_params_changed_cb_t hnp_changed;
++	cfi_setup_cb_t cfi_setup;
++#ifdef DWC_UTE_PER_IO
++	xiso_completion_cb_t xisoc_complete;
++#endif
++};
++/** @} */
++
++/** @name Function Driver Functions */
++/** @{ */
++
++/** Call this function to get pointer on dwc_otg_pcd_t,
++ * this pointer will be used for all PCD API functions.
++ *
++ * @param core_if The DWC_OTG Core
++ */
++extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if);
++
++/** Frees PCD allocated by dwc_otg_pcd_init
++ *
++ * @param pcd The PCD
++ */
++extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd);
++
++/** Call this to bind the function driver to the PCD Core.
++ *
++ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function.
++ * @param fops The Function Driver Ops data structure containing pointers to all callbacks.
++ */
++extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd,
++			      const struct dwc_otg_pcd_function_ops *fops);
++
++/** Enables an endpoint for use.  This function enables an endpoint in
++ * the PCD.  The endpoint is described by the ep_desc which has the
++ * same format as a USB ep descriptor.  The ep_handle parameter is used to refer
++ * to the endpoint from other API functions and in callbacks.  Normally this
++ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the
++ * core for that interface.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns 0 on success.
++ *
++ * @param pcd The PCD
++ * @param ep_desc Endpoint descriptor
++ * @param usb_ep Handle on endpoint, that will be used to identify endpoint.
++ */
++extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd,
++				 const uint8_t * ep_desc, void *usb_ep);
++
++/** Disable the endpoint referenced by ep_handle.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error occurred.
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle);
++
++/** Queue a data transfer request on the endpoint referenced by ep_handle.
++ * After the transfer is completes, the complete callback will be called with
++ * the request status.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param buf The buffer for the data
++ * @param dma_buf The DMA buffer for the data
++ * @param buflen The length of the data transfer
++ * @param zero Specifies whether to send zero length last packet.
++ * @param req_handle Set this handle to any value to use to reference this
++ * request in the ep_dequeue function or from the complete callback
++ * @param atomic_alloc If driver need to perform atomic allocations
++ * for internal data structures.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++				uint8_t * buf, dwc_dma_t dma_buf,
++				uint32_t buflen, int zero, void *req_handle,
++				int atomic_alloc);
++#ifdef DWC_UTE_PER_IO
++/**
++ *
++ * @param ereq_nonport	Pointer to the extended request part of the
++ *						usb_request structure defined in usb_gadget.h file.
++ */
++extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++				     uint8_t * buf, dwc_dma_t dma_buf,
++				     uint32_t buflen, int zero,
++				     void *req_handle, int atomic_alloc,
++				     void *ereq_nonport);
++
++#endif
++
++/** De-queue the specified data transfer that has not yet completed.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle,
++				  void *req_handle);
++
++/** Halt (STALL) an endpoint or clear it.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value);
++
++/** This function */
++extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle);
++
++/** This function should be called on every hardware interrupt */
++extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd);
++
++/** This function returns current frame number */
++extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd);
++
++/**
++ * Start isochronous transfers on the endpoint referenced by ep_handle.
++ * For isochronous transfers duble buffering is used.
++ * After processing each of buffers comlete callback will be called with
++ * status for each transaction.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param buf0 The virtual address of first data buffer
++ * @param buf1 The virtual address of second data buffer
++ * @param dma0 The DMA address of first data buffer
++ * @param dma1 The DMA address of second data buffer
++ * @param sync_frame Data pattern frame number
++ * @param dp_frame Data size for pattern frame
++ * @param data_per_frame Data size for regular frame
++ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP.
++ * @param buf_proc_intrvl Interval of ISOC Buffer processing
++ * @param req_handle Handle of ISOC request
++ * @param atomic_alloc Specefies whether to perform atomic allocation for
++ * 			internal data structures.
++ *
++ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function.
++ * Returns -DW_E_SHUTDOWN for any other error.
++ * Returns 0 on success
++ */
++extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle,
++				    uint8_t * buf0, uint8_t * buf1,
++				    dwc_dma_t dma0, dwc_dma_t dma1,
++				    int sync_frame, int dp_frame,
++				    int data_per_frame, int start_frame,
++				    int buf_proc_intrvl, void *req_handle,
++				    int atomic_alloc);
++
++/** Stop ISOC transfers on endpoint referenced by ep_handle.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param req_handle Handle of ISOC request
++ *
++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function
++ * Returns 0 on success
++ */
++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle,
++			    void *req_handle);
++
++/** Get ISOC packet status.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param iso_req_handle Isochronoush request handle
++ * @param packet Number of packet
++ * @param status Out parameter for returning status
++ * @param actual Out parameter for returning actual length
++ * @param offset Out parameter for returning offset
++ *
++ */
++extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd,
++					      void *ep_handle,
++					      void *iso_req_handle, int packet,
++					      int *status, int *actual,
++					      int *offset);
++
++/** Get ISOC packet count.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param iso_req_handle
++ */
++extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd,
++					    void *ep_handle,
++					    void *iso_req_handle);
++
++/** This function starts the SRP Protocol if no session is in progress. If
++ * a session is already in progress, but the device is suspended,
++ * remote wakeup signaling is started.
++ */
++extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd);
++
++/** This function returns 1 if LPM support is enabled, and 0 otherwise. */
++extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd);
++
++/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */
++extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd);
++
++/** Initiate SRP */
++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd);
++
++/** Starts remote wakeup signaling. */
++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set);
++
++/** Starts micorsecond soft disconnect. */
++extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs);
++/** This function returns whether device is dualspeed.*/
++extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd);
++
++/** This function returns whether device is otg. */
++extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd);
++
++/** These functions allow to get hnp parameters */
++extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd);
++extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd);
++extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd);
++
++/** CFI specific Interface functions */
++/** Allocate a cfi buffer */
++extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep,
++				     dwc_dma_t * addr, size_t buflen,
++				     int flags);
++
++/******************************************************************************/
++
++/** @} */
++
++#endif				/* __DWC_PCD_IF_H__ */
++
++#endif				/* DWC_HOST_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,5147 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
++ * $Revision: #116 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++#include "dwc_otg_pcd.h"
++
++#ifdef DWC_UTE_CFI
++#include "dwc_otg_cfi.h"
++#endif
++
++#ifdef DWC_UTE_PER_IO
++extern void complete_xiso_ep(dwc_otg_pcd_ep_t * ep);
++#endif
++//#define PRINT_CFI_DMA_DESCS
++
++#define DEBUG_EP0
++
++/**
++ * This function updates OTG.
++ */
++static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset)
++{
++
++	if (reset) {
++		pcd->b_hnp_enable = 0;
++		pcd->a_hnp_support = 0;
++		pcd->a_alt_hnp_support = 0;
++	}
++
++	if (pcd->fops->hnp_changed) {
++		pcd->fops->hnp_changed(pcd);
++	}
++}
++
++/** @file
++ * This file contains the implementation of the PCD Interrupt handlers.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ * All interrupt registers are processed from LSB to MSB.
++ */
++
++/**
++ * This function prints the ep0 state for debug purposes.
++ */
++static inline void print_ep0_state(dwc_otg_pcd_t * pcd)
++{
++#ifdef DEBUG
++	char str[40];
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		dwc_strcpy(str, "EP0_DISCONNECT");
++		break;
++	case EP0_IDLE:
++		dwc_strcpy(str, "EP0_IDLE");
++		break;
++	case EP0_IN_DATA_PHASE:
++		dwc_strcpy(str, "EP0_IN_DATA_PHASE");
++		break;
++	case EP0_OUT_DATA_PHASE:
++		dwc_strcpy(str, "EP0_OUT_DATA_PHASE");
++		break;
++	case EP0_IN_STATUS_PHASE:
++		dwc_strcpy(str, "EP0_IN_STATUS_PHASE");
++		break;
++	case EP0_OUT_STATUS_PHASE:
++		dwc_strcpy(str, "EP0_OUT_STATUS_PHASE");
++		break;
++	case EP0_STALL:
++		dwc_strcpy(str, "EP0_STALL");
++		break;
++	default:
++		dwc_strcpy(str, "EP0_INVALID");
++	}
++
++	DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
++#endif
++}
++
++/**
++ * This function calculate the size of the payload in the memory 
++ * for out endpoints and prints size for debug purposes(used in 
++ * 2.93a DevOutNak feature).
++ */
++static inline void print_memory_payload(dwc_otg_pcd_t * pcd,  dwc_ep_t * ep)
++{
++#ifdef DEBUG
++	deptsiz_data_t deptsiz_init = {.d32 = 0 };
++	deptsiz_data_t deptsiz_updt = {.d32 = 0 };
++	int pack_num;
++	unsigned payload;
++	
++	deptsiz_init.d32 = pcd->core_if->start_doeptsiz_val[ep->num];
++	deptsiz_updt.d32 =
++		DWC_READ_REG32(&pcd->core_if->dev_if->
++						out_ep_regs[ep->num]->doeptsiz);
++	/* Payload will be */
++	payload = deptsiz_init.b.xfersize - deptsiz_updt.b.xfersize;
++	/* Packet count is decremented every time a packet
++	 * is written to the RxFIFO not in to the external memory
++	 * So, if payload == 0, then it means no packet was sent to ext memory*/
++	pack_num = (!payload) ? 0 : (deptsiz_init.b.pktcnt - deptsiz_updt.b.pktcnt);
++	DWC_DEBUGPL(DBG_PCDV,
++		"Payload for EP%d-%s\n",
++		ep->num, (ep->is_in ? "IN" : "OUT"));
++	DWC_DEBUGPL(DBG_PCDV,
++		"Number of transfered bytes = 0x%08x\n", payload);
++	DWC_DEBUGPL(DBG_PCDV,
++		"Number of transfered packets = %d\n", pack_num);	
++#endif	
++}
++
++
++#ifdef DWC_UTE_CFI
++static inline void print_desc(struct dwc_otg_dma_desc *ddesc,
++			      const uint8_t * epname, int descnum)
++{
++	CFI_INFO
++	    ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n",
++	     epname, descnum, ddesc->buf, ddesc->status.b.bytes,
++	     ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts,
++	     ddesc->status.b.bs);
++}
++#endif
++
++/**
++ * This function returns pointer to in ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num)
++{
++	int i;
++	int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	if (ep_num == 0) {
++		return &pcd->ep0;
++	} else {
++		for (i = 0; i < num_in_eps; ++i) {
++			if (pcd->in_ep[i].dwc_ep.num == ep_num)
++				return &pcd->in_ep[i];
++		}
++		return 0;
++	}
++}
++
++/**
++ * This function returns pointer to out ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num)
++{
++	int i;
++	int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++	if (ep_num == 0) {
++		return &pcd->ep0;
++	} else {
++		for (i = 0; i < num_out_eps; ++i) {
++			if (pcd->out_ep[i].dwc_ep.num == ep_num)
++				return &pcd->out_ep[i];
++		}
++		return 0;
++	}
++}
++
++/**
++ * This functions gets a pointer to an EP from the wIndex address
++ * value of the control request.
++ */
++dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex)
++{
++	dwc_otg_pcd_ep_t *ep;
++	uint32_t ep_num = UE_GET_ADDR(wIndex);
++
++	if (ep_num == 0) {
++		ep = &pcd->ep0;
++	} else if (UE_GET_DIR(wIndex) == UE_DIR_IN) {	/* in ep */
++		ep = &pcd->in_ep[ep_num - 1];
++	} else {
++		ep = &pcd->out_ep[ep_num - 1];
++	}
++
++	return ep;
++}
++
++/**
++ * This function checks the EP request queue, if the queue is not
++ * empty the next request is started.
++ */
++void start_next_request(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_pcd_request_t *req = 0;
++	uint32_t max_transfer =
++	    GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
++
++#ifdef DWC_UTE_CFI
++	struct dwc_otg_pcd *pcd;
++	pcd = ep->pcd;
++#endif
++
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++
++#ifdef DWC_UTE_CFI
++		if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++			ep->dwc_ep.cfi_req_len = req->length;
++			pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req);
++		} else {
++#endif
++			/* Setup and start the Transfer */
++			if (req->dw_align_buf) {
++				ep->dwc_ep.dma_addr = req->dw_align_buf_dma;
++				ep->dwc_ep.start_xfer_buff = req->dw_align_buf;
++				ep->dwc_ep.xfer_buff = req->dw_align_buf;
++			} else {
++				ep->dwc_ep.dma_addr = req->dma;
++				ep->dwc_ep.start_xfer_buff = req->buf;
++				ep->dwc_ep.xfer_buff = req->buf;
++			}
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = req->length;
++			ep->dwc_ep.xfer_len = 0;
++			ep->dwc_ep.xfer_count = 0;
++
++			ep->dwc_ep.maxxfer = max_transfer;
++			if (GET_CORE_IF(ep->pcd)->dma_desc_enable) {
++				uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE
++				    - (DDMA_MAX_TRANSFER_SIZE % 4);
++				if (ep->dwc_ep.is_in) {
++					if (ep->dwc_ep.maxxfer >
++					    DDMA_MAX_TRANSFER_SIZE) {
++						ep->dwc_ep.maxxfer =
++						    DDMA_MAX_TRANSFER_SIZE;
++					}
++				} else {
++					if (ep->dwc_ep.maxxfer > out_max_xfer) {
++						ep->dwc_ep.maxxfer =
++						    out_max_xfer;
++					}
++				}
++			}
++			if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) {
++				ep->dwc_ep.maxxfer -=
++				    (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket);
++			}
++			if (req->sent_zlp) {
++				if ((ep->dwc_ep.total_len %
++				     ep->dwc_ep.maxpacket == 0)
++				    && (ep->dwc_ep.total_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++#ifdef DWC_UTE_CFI
++		}
++#endif
++		dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
++	} else if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		DWC_PRINTF("There are no more ISOC requests \n");
++		ep->dwc_ep.frame_num = 0xFFFFFFFF;
++	}
++}
++
++/**
++ * This function handles the SOF Interrupts. At this time the SOF
++ * Interrupt is disabled.
++ */
++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_PCD, "SOF\n");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sofintr = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Rx Status Queue Level Interrupt, which
++ * indicates that there is a least one packet in the Rx FIFO.  The
++ * packets are moved from the FIFO to memory, where they will be
++ * processed when the Endpoint Interrupt Register indicates Transfer
++ * Complete or SETUP Phase Done.
++ *
++ * Repeat the following until the Rx Status Queue is empty:
++ *	 -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
++ *		info
++ *	 -# If Receive FIFO is empty then skip to step Clear the interrupt
++ *		and exit
++ *	 -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
++ *		SETUP data to the buffer
++ *	 -# If OUT Data Packet call dwc_otg_read_packet to copy the data
++ *		to the destination buffer
++ */
++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t gintmask = {.d32 = 0 };
++	device_grxsts_data_t status;
++	dwc_otg_pcd_ep_t *ep;
++	gintsts_data_t gintsts;
++#ifdef DEBUG
++	static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" };
++#endif
++
++	//DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
++	/* Disable the Rx Status Queue Level interrupt */
++	gintmask.b.rxstsqlvl = 1;
++	DWC_MODIFY_REG32(&global_regs->gintmsk, gintmask.d32, 0);
++
++	/* Get the Status from the top of the FIFO */
++	status.d32 = DWC_READ_REG32(&global_regs->grxstsp);
++
++	DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
++		    "pktsts:%x Frame:%d(0x%0x)\n",
++		    status.b.epnum, status.b.bcnt,
++		    dpid_str[status.b.dpid],
++		    status.b.pktsts, status.b.fn, status.b.fn);
++	/* Get pointer to EP structure */
++	ep = get_out_ep(pcd, status.b.epnum);
++
++	switch (status.b.pktsts) {
++	case DWC_DSTS_GOUT_NAK:
++		DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
++		break;
++	case DWC_STS_DATA_UPDT:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
++		if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
++			/** @todo NGS Check for buffer overflow? */
++			dwc_otg_read_packet(core_if,
++					    ep->dwc_ep.xfer_buff,
++					    status.b.bcnt);
++			ep->dwc_ep.xfer_count += status.b.bcnt;
++			ep->dwc_ep.xfer_buff += status.b.bcnt;
++		}
++		break;
++	case DWC_STS_XFER_COMP:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
++		break;
++	case DWC_DSTS_SETUP_COMP:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
++#endif
++		break;
++	case DWC_DSTS_SETUP_UPDT:
++		dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD,
++			    "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
++			    pcd->setup_pkt->req.bmRequestType,
++			    pcd->setup_pkt->req.bRequest,
++			    UGETW(pcd->setup_pkt->req.wValue),
++			    UGETW(pcd->setup_pkt->req.wIndex),
++			    UGETW(pcd->setup_pkt->req.wLength));
++#endif
++		ep->dwc_ep.xfer_count += status.b.bcnt;
++		break;
++	default:
++		DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
++			    status.b.pktsts);
++		break;
++	}
++
++	/* Enable the Rx Status Queue Level interrupt */
++	DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmask.d32);
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	//DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
++	return 1;
++}
++
++/**
++ * This function examines the Device IN Token Learning Queue to
++ * determine the EP number of the last IN token received.  This
++ * implementation is for the Mass Storage device where there are only
++ * 2 IN EPs (Control-IN and BULK-IN).
++ *
++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
++ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ *
++ */
++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_device_global_regs_t *dev_global_regs =
++	    core_if->dev_if->dev_global_regs;
++	const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
++	/* Number of Token Queue Registers */
++	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
++	dtknq1_data_t dtknqr1;
++	uint32_t in_tkn_epnums[4];
++	int ndx = 0;
++	int i = 0;
++	volatile uint32_t *addr = &dev_global_regs->dtknqr1;
++	int epnum = 0;
++
++	//DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
++
++	/* Read the DTKNQ Registers */
++	for (i = 0; i < DTKNQ_REG_CNT; i++) {
++		in_tkn_epnums[i] = DWC_READ_REG32(addr);
++		DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1,
++			    in_tkn_epnums[i]);
++		if (addr == &dev_global_regs->dvbusdis) {
++			addr = &dev_global_regs->dtknqr3_dthrctl;
++		} else {
++			++addr;
++		}
++
++	}
++
++	/* Copy the DTKNQR1 data to the bit field. */
++	dtknqr1.d32 = in_tkn_epnums[0];
++	/* Get the EP numbers */
++	in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
++	ndx = dtknqr1.b.intknwptr - 1;
++
++	//DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
++	if (ndx == -1) {
++		/** @todo Find a simpler way to calculate the max
++		 * queue position.*/
++		int cnt = TOKEN_Q_DEPTH;
++		if (TOKEN_Q_DEPTH <= 6) {
++			cnt = TOKEN_Q_DEPTH - 1;
++		} else if (TOKEN_Q_DEPTH <= 14) {
++			cnt = TOKEN_Q_DEPTH - 7;
++		} else if (TOKEN_Q_DEPTH <= 22) {
++			cnt = TOKEN_Q_DEPTH - 15;
++		} else {
++			cnt = TOKEN_Q_DEPTH - 23;
++		}
++		epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF;
++	} else {
++		if (ndx <= 5) {
++			epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
++		} else if (ndx <= 13) {
++			ndx -= 6;
++			epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
++		} else if (ndx <= 21) {
++			ndx -= 14;
++			epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
++		} else if (ndx <= 29) {
++			ndx -= 22;
++			epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
++		}
++	}
++	//DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
++	return epnum;
++}
++
++/**
++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
++ * The active request is checked for the next packet to be loaded into
++ * the non-periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	gnptxsts_data_t txstatus = {.d32 = 0 };
++	gintsts_data_t gintsts;
++
++	int epnum = 0;
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	/* Get the epnum from the IN Token Learning Queue. */
++	epnum = get_ep_of_last_in_token(core_if);
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32);
++
++	while (txstatus.b.nptxqspcavail > 0 &&
++	       txstatus.b.nptxfspcavail > dwords &&
++	       ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
++		    DWC_READ_REG32(&global_regs->gnptxsts));
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.nptxfempty = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
++ * The active request is checked for the next packet to be loaded into
++ * apropriate Tx FIFO.
++ */
++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
++
++	while (txstatus.b.txfspcavail > dwords &&
++	       ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
++	       ep->dwc_ep.xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 =
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum,
++			    txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum,
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts));
++
++	return 1;
++}
++
++/**
++ * This function is called when the Device is disconnected. It stops
++ * any active requests and informs the Gadget driver of the
++ * disconnect.
++ */
++void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd)
++{
++	int i, num_in_eps, num_out_eps;
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_SPINLOCK(pcd->lock);
++
++	num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
++	/* don't disconnect drivers more than once */
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
++		DWC_SPINUNLOCK(pcd->lock);
++		return;
++	}
++	pcd->ep0state = EP0_DISCONNECT;
++
++	/* Reset the OTG state. */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Disable the NP Tx Fifo Empty Interrupt. */
++	intr_mask.b.nptxfempty = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Flush the FIFOs */
++	/**@todo NGS Flush Periodic FIFOs */
++	dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
++	dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
++
++	/* prevent new request submissions, kill any outstanding requests  */
++	ep = &pcd->ep0;
++	dwc_otg_request_nuke(ep);
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_in_eps; i++) {
++		dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_out_eps; i++) {
++		dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++
++	/* report disconnect; the driver is already quiesced */
++	if (pcd->fops->disconnect) {
++		DWC_SPINUNLOCK(pcd->lock);
++		pcd->fops->disconnect(pcd);
++		DWC_SPINLOCK(pcd->lock);
++	}
++	DWC_SPINUNLOCK(pcd->lock);
++}
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr");
++	intr_mask.b.i2cintr = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.i2cintr = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++#if defined(VERBOSE)
++	DWC_PRINTF("Early Suspend Detected\n");
++#endif
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.erlysuspend = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++	return 1;
++}
++
++/**
++ * This function configures EPO to receive SETUP packets.
++ *
++ * @todo NGS: Update the comments from the HW FS.
++ *
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param pcd	  Programming view of the PCD.
++ */
++static inline void ep0_out_start(dwc_otg_core_if_t * core_if,
++				 dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz0_data_t doeptsize0 = {.d32 = 0 };
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	depctl_data_t doepctl = {.d32 = 0 };
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__,
++		    DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
++#endif
++	if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++		doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl);
++		if (doepctl.b.epena) {
++			return;
++		}
++	}
++
++	doeptsize0.b.supcnt = 3;
++	doeptsize0.b.pktcnt = 1;
++	doeptsize0.b.xfersize = 8 * 3;
++
++	if (core_if->dma_enable) {
++		if (!core_if->dma_desc_enable) {
++			/** put here as for Hermes mode deptisz register should not be written */
++			DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz,
++					doeptsize0.d32);
++
++			/** @todo dma needs to handle multiple setup packets (up to 3) */
++			DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma,
++					pcd->setup_pkt_dma_handle);
++		} else {
++			dev_if->setup_desc_index =
++			    (dev_if->setup_desc_index + 1) & 1;
++			dma_desc =
++			    dev_if->setup_desc_addr[dev_if->setup_desc_index];
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++				dma_desc->status.b.sr = 0;
++				dma_desc->status.b.mtrf = 0;
++			}
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
++			dma_desc->buf = pcd->setup_pkt_dma_handle;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma,
++					dev_if->dma_setup_desc_addr
++					[dev_if->setup_desc_index]);
++		}
++
++	} else {
++		/** put here as for Hermes mode deptisz register should not be written */
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz,
++				doeptsize0.d32);
++	}
++
++	/** DOEPCTL0 Register write cnak will be set after setup interrupt */
++	doepctl.d32 = 0;
++	doepctl.b.epena = 1;
++	if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
++	doepctl.b.cnak = 1;
++	DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++	} else {
++		DWC_MODIFY_REG32(&dev_if->out_ep_regs[0]->doepctl, 0, doepctl.d32);
++	}
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++}
++
++/**
++ * This interrupt occurs when a USB Reset is detected. When the USB
++ * Reset Interrupt occurs the device state is set to DEFAULT and the
++ * EP0 state is set to IDLE.
++ *	-#	Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
++ *	-#	Unmask the following interrupt bits
++ *		- DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
++ *	- DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
++ *	- DOEPMSK.SETUP = 1
++ *	- DOEPMSK.XferCompl = 1
++ *	- DIEPMSK.XferCompl = 1
++ *	- DIEPMSK.TimeOut = 1
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ * At this point, all the required initialization, except for enabling
++ * the control 0 OUT endpoint is done, for receiving SETUP packets.
++ */
++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t doepctl = {.d32 = 0 };
++	depctl_data_t diepctl = {.d32 = 0 };
++	daint_data_t daintmsk = {.d32 = 0 };
++	doepmsk_data_t doepmsk = {.d32 = 0 };
++	diepmsk_data_t diepmsk = {.d32 = 0 };
++	dcfg_data_t dcfg = {.d32 = 0 };
++	grstctl_t resetctl = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++	int i = 0;
++	gintsts_data_t gintsts;
++	pcgcctl_data_t power = {.d32 = 0 };
++
++	power.d32 = DWC_READ_REG32(core_if->pcgcctl);
++	if (power.b.stoppclk) {
++		power.d32 = 0;
++		power.b.stoppclk = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
++
++		power.b.pwrclmp = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
++
++		power.b.rstpdwnmodule = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
++	}
++
++	core_if->lx_state = DWC_OTG_L0;
++
++	DWC_PRINTF("USB RESET\n");
++#ifdef DWC_EN_ISOC
++	for (i = 1; i < 16; ++i) {
++		dwc_otg_pcd_ep_t *ep;
++		dwc_ep_t *dwc_ep;
++		ep = get_in_ep(pcd, i);
++		if (ep != 0) {
++			dwc_ep = &ep->dwc_ep;
++			dwc_ep->next_frame = 0xffffffff;
++		}
++	}
++#endif /* DWC_EN_ISOC */
++
++	/* reset the HNP settings */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Clear the Remote Wakeup Signalling */
++	dctl.b.rmtwkupsig = 1;
++	DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
++
++	/* Set NAK for all OUT EPs */
++	doepctl.b.snak = 1;
++	for (i = 0; i <= dev_if->num_out_eps; i++) {
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32);
++	}
++
++	/* Flush the NP Tx FIFO */
++	dwc_otg_flush_tx_fifo(core_if, 0x10);
++	/* Flush the Learning Queue */
++	resetctl.b.intknqflsh = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++	if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) {
++		core_if->start_predict = 0;
++		for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) {
++			core_if->nextep_seq[i] = 0xff;	// 0xff - EP not active
++		}
++		core_if->nextep_seq[0] = 0;	
++		core_if->first_in_nextep_seq = 0;
++		diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
++		diepctl.b.nextep = 0;
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++		
++		/* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */
++		dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++		dcfg.b.epmscnt = 2;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++			__func__, core_if->first_in_nextep_seq);
++		for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++			DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]);
++		}
++	}
++
++	if (core_if->multiproc_int_enable) {
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk,
++				daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if ((core_if->dma_desc_enable) ||
++		    (core_if->dma_enable
++		     && core_if->snpsid >= OTG_CORE_REV_3_00a)) {
++			doepmsk.b.stsphsercvd = 1;
++		}
++		if (core_if->dma_desc_enable)
++			doepmsk.b.bna = 1;
++/*		
++		doepmsk.b.babble = 1;
++		doepmsk.b.nyet = 1;
++		
++		if (core_if->dma_enable) {
++			doepmsk.b.nak = 1;
++		}
++*/
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->doepeachintmsk[0],
++				doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		diepmsk.b.intknepmis = 1; 
++		if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
++			diepmsk.b.intknepmis = 0; 
++
++/*		if (core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++*/
++/*		
++		if (core_if->dma_enable) {
++			diepmsk.b.nak = 1;
++		}
++*/
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->diepeachintmsk[0],
++				diepmsk.d32);
++	} else {
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk,
++				daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if ((core_if->dma_desc_enable) ||
++		    (core_if->dma_enable
++		     && core_if->snpsid >= OTG_CORE_REV_3_00a)) {
++			doepmsk.b.stsphsercvd = 1;
++		}
++		if (core_if->dma_desc_enable)
++			doepmsk.b.bna = 1;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
++			diepmsk.b.intknepmis = 0; 
++/*
++		if (core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++*/
++
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
++	}
++
++	/* Reset Device Address */
++	dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.devaddr = 0;
++	DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* setup EP0 to receive SETUP packets */
++	if (core_if->snpsid <= OTG_CORE_REV_2_94a)
++		ep0_out_start(core_if, pcd);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbreset = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Get the device speed from the device status register and convert it
++ * to USB speed constant.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static int get_device_speed(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	int speed = 0;
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++		speed = USB_SPEED_HIGH;
++		break;
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		speed = USB_SPEED_FULL;
++		break;
++
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		speed = USB_SPEED_LOW;
++		break;
++	}
++
++	return speed;
++}
++
++/**
++ * Read the device status register and set the device speed in the
++ * data structure.
++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
++ */
++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	gintsts_data_t gintsts;
++	gusbcfg_data_t gusbcfg;
++	dwc_otg_core_global_regs_t *global_regs =
++	    GET_CORE_IF(pcd)->core_global_regs;
++	uint8_t utmi16b, utmi8b;
++	int speed;
++	DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
++
++	if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) {
++		utmi16b = 6;	//vahrama old value was 6;
++		utmi8b = 9;
++	} else {
++		utmi16b = 4;
++		utmi8b = 8;
++	}
++	dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
++	if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) {
++		ep0_out_start(GET_CORE_IF(pcd), pcd);
++	}
++
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		pcd->ep0state = EP0_IDLE;
++	} else if (pcd->ep0state == EP0_STALL) {
++		pcd->ep0state = EP0_IDLE;
++	}
++
++	pcd->ep0state = EP0_IDLE;
++
++	ep0->stopped = 0;
++
++	speed = get_device_speed(GET_CORE_IF(pcd));
++	pcd->fops->connect(pcd, speed);
++
++	/* Set USB turnaround time based on device speed and PHY interface. */
++	gusbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++	if (speed == USB_SPEED_HIGH) {
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
++		    DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
++			/* ULPI interface */
++			gusbcfg.b.usbtrdtim = 9;
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
++		    DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
++			/* UTMI+ interface */
++			if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			} else if (GET_CORE_IF(pcd)->hwcfg4.
++				   b.utmi_phy_data_width == 1) {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			} else if (GET_CORE_IF(pcd)->
++				   core_params->phy_utmi_width == 8) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			} else {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			}
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
++		    DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
++			/* UTMI+  OR  ULPI interface */
++			if (gusbcfg.b.ulpi_utmi_sel == 1) {
++				/* ULPI interface */
++				gusbcfg.b.usbtrdtim = 9;
++			} else {
++				/* UTMI+ interface */
++				if (GET_CORE_IF(pcd)->
++				    core_params->phy_utmi_width == 16) {
++					gusbcfg.b.usbtrdtim = utmi16b;
++				} else {
++					gusbcfg.b.usbtrdtim = utmi8b;
++				}
++			}
++		}
++	} else {
++		/* Full or low speed */
++		gusbcfg.b.usbtrdtim = 9;
++	}
++	DWC_WRITE_REG32(&global_regs->gusbcfg, gusbcfg.d32);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.enumdone = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the ISO OUT Packet was dropped due to
++ * Rx FIFO full or Rx Status Queue Full.  If this interrupt occurs
++ * read all the data from the Rx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++
++	DWC_WARN("INTERRUPT Handler not implemented for %s\n",
++		 "ISOC Out Dropped");
++
++	intr_mask.b.isooutdrop = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.isooutdrop = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates the end of the portion of the micro-frame
++ * for periodic transactions.  If there is a periodic transaction for
++ * the next frame, load the packets into the EP periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP");
++
++	intr_mask.b.eopframe = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.eopframe = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that EP of the packet on the top of the
++ * non-periodic Tx FIFO does not match EP of the IN Token received.
++ *
++ * The "Device IN Token Queue" Registers are read to determine the
++ * order the IN Tokens have been received. The non-periodic Tx FIFO
++ * is flushed, so it can be reloaded in the order seen in the IN Token
++ * Queue.
++ */
++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dctl_data_t dctl;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) {
++		core_if->start_predict = 1;
++	
++		DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
++	
++		gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++		if (!gintsts.b.ginnakeff) {
++			/* Disable EP Mismatch interrupt */
++			intr_mask.d32 = 0;
++			intr_mask.b.epmismatch = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
++			/* Enable the Global IN NAK Effective Interrupt */
++			intr_mask.d32 = 0;
++			intr_mask.b.ginnakeff = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32);
++			/* Set the global non-periodic IN NAK handshake */
++			dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++			dctl.b.sgnpinnak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++		} else {
++			DWC_PRINTF("gintsts.b.ginnakeff = 1! dctl.b.sgnpinnak not set\n");
++		}
++		/* Disabling of all EP's will be done in dwc_otg_pcd_handle_in_nak_effective()
++		 * handler after Global IN NAK Effective interrupt will be asserted */
++	}
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.epmismatch = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt is valid only in DMA mode. This interrupt indicates that the
++ * core has stopped fetching data for IN endpoints due to the unavailability of
++ * TxFIFO space or Request Queue space. This interrupt is used by the
++ * application for an endpoint mismatch algorithm.
++ * 
++ * @param pcd The PCD 
++ */
++int32_t dwc_otg_pcd_handle_ep_fetsusp_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++	gintmsk_data_t gintmsk_data;
++	dctl_data_t dctl;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
++	
++	/* Clear the global non-periodic IN NAK handshake */
++	dctl.d32 = 0;
++	dctl.b.cgnpinnak = 1;
++	DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); 
++	
++	/* Mask GINTSTS.FETSUSP interrupt */
++	gintmsk_data.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++	gintmsk_data.b.fetsusp = 0;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_data.d32);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.fetsusp = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++/**
++ * This funcion stalls EP0.
++ */
++static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	usb_device_request_t *ctrl = &pcd->setup_pkt->req;
++	DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
++		 ctrl->bmRequestType, ctrl->bRequest, err_val);
++
++	ep0->dwc_ep.is_in = 1;
++	dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep);
++	pcd->ep0.stopped = 1;
++	pcd->ep0state = EP0_IDLE;
++	ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This functions delegates the setup command to the gadget driver.
++ */
++static inline void do_gadget_setup(dwc_otg_pcd_t * pcd,
++				   usb_device_request_t * ctrl)
++{
++	int ret = 0;
++	DWC_SPINUNLOCK(pcd->lock);
++	ret = pcd->fops->setup(pcd, (uint8_t *) ctrl);
++	DWC_SPINLOCK(pcd->lock);
++	if (ret < 0) {
++		ep0_do_stall(pcd, ret);
++	}
++
++	/** @todo This is a g_file_storage gadget driver specific
++	 * workaround: a DELAYED_STATUS result from the fsg_setup
++	 * routine will result in the gadget queueing a EP0 IN status
++	 * phase for a two-stage control transfer. Exactly the same as
++	 * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
++	 * specific request.  Need a generic way to know when the gadget
++	 * driver will queue the status phase. Can we assume when we
++	 * call the gadget driver setup() function that it will always
++	 * queue and require the following flag? Need to look into
++	 * this.
++	 */
++
++	if (ret == 256 + 999) {
++		pcd->request_config = 1;
++	}
++}
++
++#ifdef DWC_UTE_CFI
++/**
++ * This functions delegates the CFI setup commands to the gadget driver.
++ * This function will return a negative value to indicate a failure.
++ */
++static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd,
++				   struct cfi_usb_ctrlrequest *ctrl_req)
++{
++	int ret = 0;
++
++	if (pcd->fops && pcd->fops->cfi_setup) {
++		DWC_SPINUNLOCK(pcd->lock);
++		ret = pcd->fops->cfi_setup(pcd, ctrl_req);
++		DWC_SPINLOCK(pcd->lock);
++		if (ret < 0) {
++			ep0_do_stall(pcd, ret);
++			return ret;
++		}
++	}
++
++	return ret;
++}
++#endif
++
++/**
++ * This function starts the Zero-Length Packet for the IN status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		return;
++	}
++
++	pcd->ep0state = EP0_IN_STATUS_PHASE;
++
++	/* Prepare for more SETUP Packets */
++	DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
++	if ((GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a)
++	    && (pcd->core_if->dma_desc_enable)
++	    && (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)) {
++		DWC_DEBUGPL(DBG_PCDV,
++			    "Data terminated wait next packet in out_desc_addr\n");
++		pcd->backup_buf = phys_to_virt(ep0->dwc_ep.dma_addr);
++		pcd->data_terminated = 1;
++	}
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 1;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++	//ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This function starts the Zero-Length Packet for the OUT status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
++		return;
++	}
++	pcd->ep0state = EP0_OUT_STATUS_PHASE;
++
++	DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 0;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++	if (GET_CORE_IF(pcd)->dma_enable == 0) {
++		ep0_out_start(GET_CORE_IF(pcd), pcd);
++	}
++}
++
++/**
++ * Clear the EP halt (STALL) and if pending requests start the
++ * transfer.
++ */
++static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep)
++{
++	if (ep->dwc_ep.stall_clear_flag == 0)
++		dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++
++	/* Reactive the EP */
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	if (ep->stopped) {
++		ep->stopped = 0;
++		/* If there is a request in the EP queue start it */
++
++		/** @todo FIXME: this causes an EP mismatch in DMA mode.
++		 * epmismatch not yet implemented. */
++
++		/*
++		 * Above fixme is solved by implmenting a tasklet to call the
++		 * start_next_request(), outside of interrupt context at some
++		 * time after the current time, after a clear-halt setup packet.
++		 * Still need to implement ep mismatch in the future if a gadget
++		 * ever uses more than one endpoint at once
++		 */
++		ep->queue_sof = 1;
++		DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet);
++	}
++	/* Start Control Status Phase */
++	do_setup_in_status_phase(pcd);
++}
++
++/**
++ * This function is called when the SET_FEATURE TEST_MODE Setup packet
++ * is sent from the host.  The Device Control register is written with
++ * the Test Mode bits set to the specified Test Mode.  This is done as
++ * a tasklet so that the "Status" phase of the control transfer
++ * completes before transmitting the TEST packets.
++ *
++ * @todo This has not been tested since the tasklet struct was put
++ * into the PCD struct!
++ *
++ */
++void do_test_mode(void *data)
++{
++	dctl_data_t dctl;
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	int test_mode = pcd->test_mode;
++
++//        DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
++
++	dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	switch (test_mode) {
++	case 1:		// TEST_J
++		dctl.b.tstctl = 1;
++		break;
++
++	case 2:		// TEST_K
++		dctl.b.tstctl = 2;
++		break;
++
++	case 3:		// TEST_SE0_NAK
++		dctl.b.tstctl = 3;
++		break;
++
++	case 4:		// TEST_PACKET
++		dctl.b.tstctl = 4;
++		break;
++
++	case 5:		// TEST_FORCE_ENABLE
++		dctl.b.tstctl = 5;
++		break;
++	}
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++}
++
++/**
++ * This function process the GET_STATUS Setup Commands.
++ */
++static inline void do_get_status(dwc_otg_pcd_t * pcd)
++{
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	uint16_t *status = pcd->status_buf;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD,
++		    "GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++#endif
++
++	switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
++	case UT_DEVICE:
++		if(UGETW(ctrl.wIndex) == 0xF000) { /* OTG Status selector */
++			DWC_PRINTF("wIndex - %d\n", UGETW(ctrl.wIndex));
++			DWC_PRINTF("OTG VERSION - %d\n", core_if->otg_ver);
++			DWC_PRINTF("OTG CAP - %d, %d\n",
++				   core_if->core_params->otg_cap,
++						DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++			if (core_if->otg_ver == 1
++			    && core_if->core_params->otg_cap ==
++			    DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				uint8_t *otgsts = (uint8_t*)pcd->status_buf;
++				*otgsts = (core_if->otg_sts & 0x1);
++				pcd->ep0_pending = 1;
++				ep0->dwc_ep.start_xfer_buff =
++				    (uint8_t *) otgsts;
++				ep0->dwc_ep.xfer_buff = (uint8_t *) otgsts;
++				ep0->dwc_ep.dma_addr =
++				    pcd->status_buf_dma_handle;
++				ep0->dwc_ep.xfer_len = 1;
++				ep0->dwc_ep.xfer_count = 0;
++				ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
++				dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd),
++							   &ep0->dwc_ep);
++				return;
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++		} else {
++			*status = 0x1;	/* Self powered */
++			*status |= pcd->remote_wakeup_enable << 1;
++			break;
++		}
++	case UT_INTERFACE:
++		*status = 0;
++		break;
++
++	case UT_ENDPOINT:
++		ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
++		if (ep == 0 || UGETW(ctrl.wLength) > 2) {
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++		}
++		/** @todo check for EP stall */
++		*status = ep->stopped;
++		break;
++	}
++	pcd->ep0_pending = 1;
++	ep0->dwc_ep.start_xfer_buff = (uint8_t *) status;
++	ep0->dwc_ep.xfer_buff = (uint8_t *) status;
++	ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
++	ep0->dwc_ep.xfer_len = 2;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++}
++
++/**
++ * This function process the SET_FEATURE Setup Commands.
++ */
++static inline void do_set_feature(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep = 0;
++	int32_t otg_cap_param = core_if->core_params->otg_cap;
++	gotgctl_data_t gotgctl = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++	DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param);
++
++	switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
++	case UT_DEVICE:
++		switch (UGETW(ctrl.wValue)) {
++		case UF_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 1;
++			break;
++
++		case UF_TEST_MODE:
++			/* Setup the Test Mode tasklet to do the Test
++			 * Packet generation after the SETUP Status
++			 * phase has completed. */
++
++			/** @todo This has not been tested since the
++			 * tasklet struct was put into the PCD
++			 * struct! */
++			pcd->test_mode = UGETW(ctrl.wIndex) >> 8;
++			DWC_TASK_SCHEDULE(pcd->test_mode_tasklet);
++			break;
++
++		case UF_DEVICE_B_HNP_ENABLE:
++			DWC_DEBUGPL(DBG_PCDV,
++				    "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
++
++			/* dev may initiate HNP */
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->b_hnp_enable = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++				DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
++				/**@todo Is the gotgctl.devhnpen cleared
++				 * by a USB Reset? */
++				gotgctl.b.devhnpen = 1;
++				gotgctl.b.hnpreq = 1;
++				DWC_WRITE_REG32(&global_regs->gotgctl,
++						gotgctl.d32);
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++
++		case UF_DEVICE_A_HNP_SUPPORT:
++			/* RH port supports HNP */
++			DWC_DEBUGPL(DBG_PCDV,
++				    "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++
++		case UF_DEVICE_A_ALT_HNP_SUPPORT:
++			/* other RH port does */
++			DWC_DEBUGPL(DBG_PCDV,
++				    "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_alt_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++
++		default:
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case UT_INTERFACE:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case UT_ENDPOINT:
++		if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) {
++			ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
++			if (ep == 0) {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++	}
++}
++
++/**
++ * This function process the CLEAR_FEATURE Setup Commands.
++ */
++static inline void do_clear_feature(dwc_otg_pcd_t * pcd)
++{
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep = 0;
++
++	DWC_DEBUGPL(DBG_PCD,
++		    "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++
++	switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
++	case UT_DEVICE:
++		switch (UGETW(ctrl.wValue)) {
++		case UF_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 0;
++			break;
++
++		case UF_TEST_MODE:
++			/** @todo Add CLEAR_FEATURE for TEST modes. */
++			break;
++
++		default:
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case UT_ENDPOINT:
++		ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
++		if (ep == 0) {
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++		}
++
++		pcd_clear_halt(pcd, ep);
++
++		break;
++	}
++}
++
++/**
++ * This function process the SET_ADDRESS Setup Commands.
++ */
++static inline void do_set_address(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++
++	if (ctrl.bmRequestType == UT_DEVICE) {
++		dcfg_data_t dcfg = {.d32 = 0 };
++
++#ifdef DEBUG_EP0
++//                      DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
++#endif
++		dcfg.b.devaddr = UGETW(ctrl.wValue);
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
++		do_setup_in_status_phase(pcd);
++	}
++}
++
++/**
++ *	This function processes SETUP commands. In Linux, the USB Command
++ *	processing is done in two places - the first being the PCD and the
++ *	second in the Gadget Driver (for example, the File-Backed Storage
++ *	Gadget Driver).
++ *
++ * <table>
++ * <tr><td>Command	</td><td>Driver </td><td>Description</td></tr>
++ *
++ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
++ * defined in chapter 9 of the USB 2.0 Specification chapter 9
++ * </td></tr>
++ *
++ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are the ENDPOINT_HALT feature is procesed, all others the
++ * interface requests are ignored.</td></tr>
++ *
++ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are processed by the PCD.  Interface requests are passed
++ * to the Gadget Driver.</td></tr>
++ *
++ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
++ * with device address received </td></tr>
++ *
++ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
++ * requested descriptor</td></tr>
++ *
++ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
++ * not implemented by any of the existing Gadget Drivers.</td></tr>
++ *
++ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
++ * all EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
++ * the current configuration</td></tr>
++ *
++ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
++ * EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
++ * current interface.</td></tr>
++ *
++ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
++ * message.</td></tr>
++ * </table>
++ *
++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
++ * processed by pcd_setup. Calling the Function Driver's setup function from
++ * pcd_setup processes the gadget SETUP commands.
++ */
++static inline void pcd_setup(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++
++	deptsiz0_data_t doeptsize0 = {.d32 = 0 };
++
++#ifdef DWC_UTE_CFI
++	int retval = 0;
++	struct cfi_usb_ctrlrequest cfi_req;
++#endif
++
++	doeptsize0.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doeptsiz);
++
++	/** In BDMA more then 1 setup packet is not supported till 3.00a */
++	if (core_if->dma_enable && core_if->dma_desc_enable == 0
++	    && (doeptsize0.b.supcnt < 2)
++	    && (core_if->snpsid < OTG_CORE_REV_2_94a)) {
++		DWC_ERROR
++		    ("\n\n-----------	 CANNOT handle > 1 setup packet in DMA mode\n\n");
++	}
++	if ((core_if->snpsid >= OTG_CORE_REV_3_00a)
++	    && (core_if->dma_enable == 1) && (core_if->dma_desc_enable == 0)) {
++		ctrl =
++		    (pcd->setup_pkt +
++		     (3 - doeptsize0.b.supcnt - 1 +
++		      ep0->dwc_ep.stp_rollover))->req;
++	}
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++#endif
++
++	/* Clean up the request queue */
++	dwc_otg_request_nuke(ep0);
++	ep0->stopped = 0;
++
++	if (ctrl.bmRequestType & UE_DIR_IN) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_DATA_PHASE;
++	} else {
++		ep0->dwc_ep.is_in = 0;
++		pcd->ep0state = EP0_OUT_DATA_PHASE;
++	}
++
++	if (UGETW(ctrl.wLength) == 0) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_STATUS_PHASE;
++	}
++
++	if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) {
++
++#ifdef DWC_UTE_CFI
++		DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t));
++
++		//printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n", 
++				ctrl.bRequestType, ctrl.bRequest);
++		if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) {
++			if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) {
++				retval = cfi_setup(pcd, &cfi_req);
++				if (retval < 0) {
++					ep0_do_stall(pcd, retval);
++					pcd->ep0_pending = 0;
++					return;
++				}
++
++				/* if need gadget setup then call it and check the retval */
++				if (pcd->cfi->need_gadget_att) {
++					retval =
++					    cfi_gadget_setup(pcd,
++							     &pcd->
++							     cfi->ctrl_req);
++					if (retval < 0) {
++						pcd->ep0_pending = 0;
++						return;
++					}
++				}
++
++				if (pcd->cfi->need_status_in_complete) {
++					do_setup_in_status_phase(pcd);
++				}
++				return;
++			}
++		}
++#endif
++
++		/* handle non-standard (class/vendor) requests in the gadget driver */
++		do_gadget_setup(pcd, &ctrl);
++		return;
++	}
++
++	/** @todo NGS: Handle bad setup packet? */
++
++///////////////////////////////////////////
++//// --- Standard Request handling --- ////
++
++	switch (ctrl.bRequest) {
++	case UR_GET_STATUS:
++		do_get_status(pcd);
++		break;
++
++	case UR_CLEAR_FEATURE:
++		do_clear_feature(pcd);
++		break;
++
++	case UR_SET_FEATURE:
++		do_set_feature(pcd);
++		break;
++
++	case UR_SET_ADDRESS:
++		do_set_address(pcd);
++		break;
++
++	case UR_SET_INTERFACE:
++	case UR_SET_CONFIG:
++//              _pcd->request_config = 1;       /* Configuration changed */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case UR_SYNCH_FRAME:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	default:
++		/* Call the Gadget Driver's setup functions */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++	}
++}
++
++/**
++ * This function completes the ep0 control transfer.
++ */
++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	    dev_if->in_ep_regs[ep->dwc_ep.num];
++#ifdef DEBUG_EP0
++	dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++	    dev_if->out_ep_regs[ep->dwc_ep.num];
++#endif
++	deptsiz0_data_t deptsiz;
++	dev_dma_desc_sts_t desc_sts;
++	dwc_otg_pcd_request_t *req;
++	int is_last = 0;
++	dwc_otg_pcd_t *pcd = ep->pcd;
++
++#ifdef DWC_UTE_CFI
++	struct cfi_usb_ctrlrequest *ctrlreq;
++	int retval = -DWC_E_NOT_SUPPORTED;
++#endif
++
++        desc_sts.b.bytes = 0;
++        
++	if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		if (ep->dwc_ep.is_in) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
++#endif
++			do_setup_out_status_phase(pcd);
++		} else {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
++#endif
++
++#ifdef DWC_UTE_CFI
++			ctrlreq = &pcd->cfi->ctrl_req;
++
++			if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) {
++				if (ctrlreq->bRequest > 0xB0
++				    && ctrlreq->bRequest < 0xBF) {
++
++					/* Return if the PCD failed to handle the request */
++					if ((retval =
++					     pcd->cfi->ops.
++					     ctrl_write_complete(pcd->cfi,
++								 pcd)) < 0) {
++						CFI_INFO
++						    ("ERROR setting a new value in the PCD(%d)\n",
++						     retval);
++						ep0_do_stall(pcd, retval);
++						pcd->ep0_pending = 0;
++						return 0;
++					}
++
++					/* If the gadget needs to be notified on the request */
++					if (pcd->cfi->need_gadget_att == 1) {
++						//retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req);
++						retval =
++						    cfi_gadget_setup(pcd,
++								     &pcd->cfi->
++								     ctrl_req);
++
++						/* Return from the function if the gadget failed to process
++						 * the request properly - this should never happen !!!
++						 */
++						if (retval < 0) {
++							CFI_INFO
++							    ("ERROR setting a new value in the gadget(%d)\n",
++							     retval);
++							pcd->ep0_pending = 0;
++							return 0;
++						}
++					}
++
++					CFI_INFO("%s: RETVAL=%d\n", __func__,
++						 retval);
++					/* If we hit here then the PCD and the gadget has properly
++					 * handled the request - so send the ZLP IN to the host.
++					 */
++					/* @todo: MAS - decide whether we need to start the setup
++					 * stage based on the need_setup value of the cfi object
++					 */
++					do_setup_in_status_phase(pcd);
++					pcd->ep0_pending = 0;
++					return 1;
++				}
++			}
++#endif
++
++			do_setup_in_status_phase(pcd);
++		}
++		pcd->ep0_pending = 0;
++		return 1;
++	}
++
++	if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		return 0;
++	}
++	req = DWC_CIRCLEQ_FIRST(&ep->queue);
++
++	if (pcd->ep0state == EP0_OUT_STATUS_PHASE
++	    || pcd->ep0state == EP0_IN_STATUS_PHASE) {
++		is_last = 1;
++	} else if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz);
++		if (core_if->dma_desc_enable != 0)
++			desc_sts = dev_if->in_desc_addr->status;
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "%d len=%d  xfersize=%d pktcnt=%d\n",
++			    ep->dwc_ep.num, ep->dwc_ep.xfer_len,
++			    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++#endif
++
++		if (((core_if->dma_desc_enable == 0)
++		     && (deptsiz.b.xfersize == 0))
++		    || ((core_if->dma_desc_enable != 0)
++			&& (desc_sts.b.bytes == 0))) {
++			req->actual = ep->dwc_ep.xfer_count;
++			/* Is a Zero Len Packet needed? */
++			if (req->sent_zlp) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
++#endif
++				req->sent_zlp = 0;
++			}
++			do_setup_out_status_phase(pcd);
++		}
++	} else {
++		/* ep0-OUT */
++#ifdef DEBUG_EP0
++		deptsiz.d32 = DWC_READ_REG32(&out_ep_regs->doeptsiz);
++		DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n",
++			    ep->dwc_ep.num, ep->dwc_ep.xfer_len,
++			    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++#endif
++		req->actual = ep->dwc_ep.xfer_count;
++
++		/* Is a Zero Len Packet needed? */
++		if (req->sent_zlp) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
++#endif
++			req->sent_zlp = 0;
++		}
++		/* For older cores do setup in status phase in Slave/BDMA modes,
++		 * starting from 3.00 do that only in slave, and for DMA modes
++		 * just re-enable ep 0 OUT here*/
++		if (core_if->dma_enable == 0
++		    || (core_if->dma_desc_enable == 0
++			&& core_if->snpsid <= OTG_CORE_REV_2_94a)) {
++			do_setup_in_status_phase(pcd);
++		} else if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++			DWC_DEBUGPL(DBG_PCDV,
++				    "Enable out ep before in status phase\n");
++			ep0_out_start(core_if, pcd);
++		}
++	}
++
++	/* Complete the request */
++	if (is_last) {
++		dwc_otg_request_done(ep, req, 0);
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++		return 1;
++	}
++	return 0;
++}
++
++#ifdef DWC_UTE_CFI
++/**
++ * This function calculates traverses all the CFI DMA descriptors and
++ * and accumulates the bytes that are left to be transfered.
++ *
++ * @return The total bytes left to transfered, or a negative value as failure
++ */
++static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep)
++{
++	int32_t ret = 0;
++	int i;
++	struct dwc_otg_dma_desc *ddesc = NULL;
++	struct cfi_ep *cfiep;
++
++	/* See if the pcd_ep has its respective cfi_ep mapped */
++	cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep);
++	if (!cfiep) {
++		CFI_INFO("%s: Failed to find ep\n", __func__);
++		return -1;
++	}
++
++	ddesc = ep->dwc_ep.descs;
++
++	for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) {
++
++#if defined(PRINT_CFI_DMA_DESCS)
++		print_desc(ddesc, ep->ep.name, i);
++#endif
++		ret += ddesc->status.b.bytes;
++		ddesc++;
++	}
++
++	if (ret)
++		CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__,
++			 ret);
++
++	return ret;
++}
++#endif
++
++/**
++ * This function completes the request for the EP. If there are
++ * additional requests for the EP in the queue they will be started.
++ */
++static void complete_ep(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	    dev_if->in_ep_regs[ep->dwc_ep.num];
++	deptsiz_data_t deptsiz;
++	dev_dma_desc_sts_t desc_sts;
++	dwc_otg_pcd_request_t *req = 0;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	uint32_t byte_count = 0;
++	int is_last = 0;
++	int i;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num,
++		    (ep->dwc_ep.is_in ? "IN" : "OUT"));
++
++	/* Get any pending requests */
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		if (!req) {
++			DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
++			return;
++		}
++	} else {
++		DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
++		return;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
++
++	if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz);
++
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				if (deptsiz.b.xfersize == 0
++				    && deptsiz.b.pktcnt == 0) {
++					byte_count =
++					    ep->dwc_ep.xfer_len -
++					    ep->dwc_ep.xfer_count;
++
++					ep->dwc_ep.xfer_buff += byte_count;
++					ep->dwc_ep.dma_addr += byte_count;
++					ep->dwc_ep.xfer_count += byte_count;
++
++					DWC_DEBUGPL(DBG_PCDV,
++						    "%d-%s len=%d  xfersize=%d pktcnt=%d\n",
++						    ep->dwc_ep.num,
++						    (ep->dwc_ep.
++						     is_in ? "IN" : "OUT"),
++						    ep->dwc_ep.xfer_len,
++						    deptsiz.b.xfersize,
++						    deptsiz.b.pktcnt);
++
++					if (ep->dwc_ep.xfer_len <
++					    ep->dwc_ep.total_len) {
++						dwc_otg_ep_start_transfer
++						    (core_if, &ep->dwc_ep);
++					} else if (ep->dwc_ep.sent_zlp) {
++						/*     
++						 * This fragment of code should initiate 0
++						 * length transfer in case if it is queued
++						 * a transfer with size divisible to EPs max
++						 * packet size and with usb_request zero field
++						 * is set, which means that after data is transfered,
++						 * it is also should be transfered
++						 * a 0 length packet at the end. For Slave and
++						 * Buffer DMA modes in this case SW has
++						 * to initiate 2 transfers one with transfer size,
++						 * and the second with 0 size. For Descriptor
++						 * DMA mode SW is able to initiate a transfer,
++						 * which will handle all the packets including
++						 * the last  0 length.
++						 */
++						ep->dwc_ep.sent_zlp = 0;
++						dwc_otg_ep_start_zl_transfer
++						    (core_if, &ep->dwc_ep);
++					} else {
++						is_last = 1;
++					}
++				} else {
++					if (ep->dwc_ep.type ==
++					    DWC_OTG_EP_TYPE_ISOC) {
++						req->actual = 0;
++						dwc_otg_request_done(ep, req, 0);
++
++						ep->dwc_ep.start_xfer_buff = 0;
++						ep->dwc_ep.xfer_buff = 0;
++						ep->dwc_ep.xfer_len = 0;
++
++						/* If there is a request in the queue start it. */
++						start_next_request(ep);
++					} else
++						DWC_WARN
++						("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n",
++						ep->dwc_ep.num,
++						(ep->dwc_ep.is_in ? "IN" : "OUT"),
++						deptsiz.b.xfersize,
++						deptsiz.b.pktcnt);
++				}
++			} else {
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++
++#ifdef DWC_UTE_CFI
++				CFI_INFO("%s: BUFFER_MODE=%d\n", __func__,
++					 ep->dwc_ep.buff_mode);
++				if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++					int residue;
++
++					residue = cfi_calc_desc_residue(ep);
++					if (residue < 0)
++						return;
++
++					byte_count = residue;
++				} else {
++#endif
++					for (i = 0; i < ep->dwc_ep.desc_cnt;
++					     ++i) {
++					desc_sts = dma_desc->status;
++					byte_count += desc_sts.b.bytes;
++					dma_desc++;
++				}
++#ifdef DWC_UTE_CFI
++				}
++#endif
++				if (byte_count == 0) {
++					ep->dwc_ep.xfer_count =
++					    ep->dwc_ep.total_len;
++					is_last = 1;
++				} else {
++					DWC_WARN("Incomplete transfer\n");
++				}
++			}
++		} else {
++			if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
++				DWC_DEBUGPL(DBG_PCDV,
++					    "%d-%s len=%d  xfersize=%d pktcnt=%d\n",
++					    ep->dwc_ep.num,
++					    ep->dwc_ep.is_in ? "IN" : "OUT",
++					    ep->dwc_ep.xfer_len,
++					    deptsiz.b.xfersize,
++					    deptsiz.b.pktcnt);
++
++				/*      Check if the whole transfer was completed, 
++				 *      if no, setup transfer for next portion of data
++				 */
++				if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					dwc_otg_ep_start_transfer(core_if,
++								  &ep->dwc_ep);
++				} else if (ep->dwc_ep.sent_zlp) {
++					/*     
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if,
++								     &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			} else {
++				DWC_WARN
++				    ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n",
++				     ep->dwc_ep.num,
++				     (ep->dwc_ep.is_in ? "IN" : "OUT"),
++				     deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			}
++		}
++	} else {
++		dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++		    dev_if->out_ep_regs[ep->dwc_ep.num];
++		desc_sts.d32 = 0;
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable) {
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++
++#ifdef DWC_UTE_CFI
++				CFI_INFO("%s: BUFFER_MODE=%d\n", __func__,
++					 ep->dwc_ep.buff_mode);
++				if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++					int residue;
++					residue = cfi_calc_desc_residue(ep);
++					if (residue < 0)
++						return;
++					byte_count = residue;
++				} else {
++#endif
++
++					for (i = 0; i < ep->dwc_ep.desc_cnt;
++					     ++i) {
++						desc_sts = dma_desc->status;
++						byte_count += desc_sts.b.bytes;
++						dma_desc++;
++					}
++
++#ifdef DWC_UTE_CFI
++				}
++#endif
++				/* Checking for interrupt Out transfers with not 
++				 * dword aligned mps sizes 
++				 */
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_INTR &&
++							(ep->dwc_ep.maxpacket%4)) {
++					ep->dwc_ep.xfer_count =
++					    ep->dwc_ep.total_len - byte_count;
++					if ((ep->dwc_ep.xfer_len %
++					     ep->dwc_ep.maxpacket)
++					    && (ep->dwc_ep.xfer_len /
++						ep->dwc_ep.maxpacket <
++						MAX_DMA_DESC_CNT))
++						ep->dwc_ep.xfer_len -=
++						    (ep->dwc_ep.desc_cnt -
++						     1) * ep->dwc_ep.maxpacket +
++						    ep->dwc_ep.xfer_len %
++						    ep->dwc_ep.maxpacket;
++					else						
++						ep->dwc_ep.xfer_len -=
++						    ep->dwc_ep.desc_cnt *
++						    ep->dwc_ep.maxpacket;
++					if (ep->dwc_ep.xfer_len > 0) {
++						dwc_otg_ep_start_transfer
++						    (core_if, &ep->dwc_ep);
++					} else {
++						is_last = 1;
++					}
++				} else {
++					ep->dwc_ep.xfer_count =
++					    ep->dwc_ep.total_len - byte_count +
++					    ((4 -
++					      (ep->dwc_ep.
++					       total_len & 0x3)) & 0x3);
++					is_last = 1;
++				}	
++			} else {
++				deptsiz.d32 = 0;
++				deptsiz.d32 =
++				    DWC_READ_REG32(&out_ep_regs->doeptsiz);
++
++				byte_count = (ep->dwc_ep.xfer_len -
++					      ep->dwc_ep.xfer_count -
++					      deptsiz.b.xfersize);
++				ep->dwc_ep.xfer_buff += byte_count;
++				ep->dwc_ep.dma_addr += byte_count;
++				ep->dwc_ep.xfer_count += byte_count;
++
++				/*      Check if the whole transfer was completed, 
++				 *      if no, setup transfer for next portion of data
++				 */
++				if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					dwc_otg_ep_start_transfer(core_if,
++								  &ep->dwc_ep);
++				} else if (ep->dwc_ep.sent_zlp) {
++					/*     
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if,
++								     &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			}
++		} else {
++			/*      Check if the whole transfer was completed, 
++			 *      if no, setup transfer for next portion of data
++			 */
++			if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++				dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++			} else if (ep->dwc_ep.sent_zlp) {
++				/*     
++				 * This fragment of code should initiate 0
++				 * length transfer in case if it is queued
++				 * a transfer with size divisible to EPs max
++				 * packet size and with usb_request zero field
++				 * is set, which means that after data is transfered,
++				 * it is also should be transfered
++				 * a 0 length packet at the end. For Slave and
++				 * Buffer DMA modes in this case SW has
++				 * to initiate 2 transfers one with transfer size,
++				 * and the second with 0 size. For Descriptor
++				 * DMA mode SW is able to initiate a transfer,
++				 * which will handle all the packets including
++				 * the last  0 length.
++				 */
++				ep->dwc_ep.sent_zlp = 0;
++				dwc_otg_ep_start_zl_transfer(core_if,
++							     &ep->dwc_ep);
++			} else {
++				is_last = 1;
++			}
++		}
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "addr %p,	 %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n",
++			    &out_ep_regs->doeptsiz, ep->dwc_ep.num,
++			    ep->dwc_ep.is_in ? "IN" : "OUT",
++			    ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count,
++			    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++	}
++
++	/* Complete the request */
++	if (is_last) {
++#ifdef DWC_UTE_CFI
++		if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++			req->actual = ep->dwc_ep.cfi_req_len - byte_count;
++		} else {
++#endif
++			req->actual = ep->dwc_ep.xfer_count;
++#ifdef DWC_UTE_CFI
++		}
++#endif
++		if (req->dw_align_buf) {
++			if (!ep->dwc_ep.is_in) {
++				dwc_memcpy(req->buf, req->dw_align_buf, req->length); 
++			}
++			DWC_DMA_FREE(req->length, req->dw_align_buf,
++				     req->dw_align_buf_dma);
++		}
++
++		dwc_otg_request_done(ep, req, 0);
++
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++
++		/* If there is a request in the queue start it. */
++		start_next_request(ep);
++	}
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function BNA interrupt for Isochronous EPs
++ *
++ */
++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	volatile uint32_t *addr;
++	depctl_data_t depctl = {.d32 = 0 };
++	dwc_otg_pcd_t *pcd = ep->pcd;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	int i;
++
++	dma_desc =
++	    dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
++
++	if (dwc_ep->is_in) {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
++			sts.d32 = dma_desc->status.d32;
++			sts.b_iso_in.bs = BS_HOST_READY;
++			dma_desc->status.d32 = sts.d32;
++		}
++	} else {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
++			sts.d32 = dma_desc->status.d32;
++			sts.b_iso_out.bs = BS_HOST_READY;
++			dma_desc->status.d32 = sts.d32;
++		}
++	}
++
++	if (dwc_ep->is_in == 0) {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->
++							   num]->doepctl;
++	} else {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++	depctl.b.epena = 1;
++	DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
++}
++
++/**
++ * This function sets latest iso packet information(non-PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	dma_addr_t dma_addr;
++	uint32_t offset;
++
++	if (ep->proc_buf_num)
++		dma_addr = ep->dma_addr1;
++	else
++		dma_addr = ep->dma_addr0;
++
++	if (ep->is_in) {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->
++				   in_ep_regs[ep->num]->dieptsiz);
++		offset = ep->data_per_frame;
++	} else {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->
++				   out_ep_regs[ep->num]->doeptsiz);
++		offset =
++		    ep->data_per_frame +
++		    (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
++	}
++
++	if (!deptsiz.b.xfersize) {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset =
++		    ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = 0;
++	} else {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset =
++		    ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA;
++	}
++	ep->cur_pkt_addr += offset;
++	ep->cur_pkt_dma_addr += offset;
++	ep->cur_pkt++;
++}
++
++/**
++ * This function sets latest iso packet information(DDMA mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if,
++				   dwc_ep_t * dwc_ep)
++{
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	dev_dma_desc_sts_t sts = {.d32 = 0 };
++	iso_pkt_info_t *iso_packet;
++	uint32_t data_per_desc;
++	uint32_t offset;
++	int i, j;
++
++	iso_packet = dwc_ep->pkt_info;
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if (dwc_ep->is_in == 0) {
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++		offset = 0;
++
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				data_per_desc =
++				    ((j + 1) * dwc_ep->maxpacket >
++				     dwc_ep->
++				     data_per_frame) ? dwc_ep->data_per_frame -
++				    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc +=
++				    (data_per_desc % 4) ? (4 -
++							   data_per_desc %
++							   4) : 0;
++
++				sts.d32 = dma_desc->status.d32;
++
++				/* Write status in iso_packet_decsriptor  */
++				iso_packet->status =
++				    sts.b_iso_out.rxsts +
++				    (sts.b_iso_out.bs ^ BS_DMA_DONE);
++				if (iso_packet->status) {
++					iso_packet->status = -DWC_E_NO_DATA;
++				}
++
++				/* Received data length */
++				if (!sts.b_iso_out.rxbytes) {
++					iso_packet->length =
++					    data_per_desc -
++					    sts.b_iso_out.rxbytes;
++				} else {
++					iso_packet->length =
++					    data_per_desc -
++					    sts.b_iso_out.rxbytes + (4 -
++								     dwc_ep->data_per_frame
++								     % 4);
++				}
++
++				iso_packet->offset = offset;
++
++				offset += data_per_desc;
++				dma_desc++;
++				iso_packet++;
++			}
++		}
++
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++			data_per_desc =
++			    ((j + 1) * dwc_ep->maxpacket >
++			     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++			    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc +=
++			    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++
++			sts.d32 = dma_desc->status.d32;
++
++			/* Write status in iso_packet_decsriptor  */
++			iso_packet->status =
++			    sts.b_iso_out.rxsts +
++			    (sts.b_iso_out.bs ^ BS_DMA_DONE);
++			if (iso_packet->status) {
++				iso_packet->status = -DWC_E_NO_DATA;
++			}
++
++			/* Received data length */
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++
++			iso_packet->offset = offset;
++
++			offset += data_per_desc;
++			iso_packet++;
++			dma_desc++;
++		}
++
++		sts.d32 = dma_desc->status.d32;
++
++		/* Write status in iso_packet_decsriptor  */
++		iso_packet->status =
++		    sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE);
++		if (iso_packet->status) {
++			iso_packet->status = -DWC_E_NO_DATA;
++		}
++		/* Received data length */
++		if (!sts.b_iso_out.rxbytes) {
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++		} else {
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
++			    (4 - dwc_ep->data_per_frame % 4);
++		}
++
++		iso_packet->offset = offset;
++	} else {
++/** ISO IN EP */
++
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
++			sts.d32 = dma_desc->status.d32;
++
++			/* Write status in iso packet descriptor */
++			iso_packet->status =
++			    sts.b_iso_in.txsts +
++			    (sts.b_iso_in.bs ^ BS_DMA_DONE);
++			if (iso_packet->status != 0) {
++				iso_packet->status = -DWC_E_NO_DATA;
++
++			}
++			/* Bytes has been transfered */
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++
++			dma_desc++;
++			iso_packet++;
++		}
++
++		sts.d32 = dma_desc->status.d32;
++		while (sts.b_iso_in.bs == BS_DMA_BUSY) {
++			sts.d32 = dma_desc->status.d32;
++		}
++
++		/* Write status in iso packet descriptor ??? do be done with ERROR codes */
++		iso_packet->status =
++		    sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE);
++		if (iso_packet->status != 0) {
++			iso_packet->status = -DWC_E_NO_DATA;
++		}
++
++		/* Bytes has been transfered */
++		iso_packet->length =
++		    dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++	}
++}
++
++/**
++ * This function reinitialize DMA Descriptors for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep)
++{
++	int i, j;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	dma_addr_t dma_ad;
++	volatile uint32_t *addr;
++	dev_dma_desc_sts_t sts = {.d32 = 0 };
++	uint32_t data_per_desc;
++
++	if (dwc_ep->is_in == 0) {
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++	} else {
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++
++	if (dwc_ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++	} else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = dwc_ep->dma_addr1;
++	}
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if (dwc_ep->is_in == 0) {
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				data_per_desc =
++				    ((j + 1) * dwc_ep->maxpacket >
++				     dwc_ep->
++				     data_per_frame) ? dwc_ep->data_per_frame -
++				    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc +=
++				    (data_per_desc % 4) ? (4 -
++							   data_per_desc %
++							   4) : 0;
++				sts.b_iso_out.rxbytes = data_per_desc;
++				dma_desc->buf = dma_ad;
++				dma_desc->status.d32 = sts.d32;
++
++				dma_ad += data_per_desc;
++				dma_desc++;
++			}
++		}
++
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++
++			data_per_desc =
++			    ((j + 1) * dwc_ep->maxpacket >
++			     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++			    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc +=
++			    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			dma_desc++;
++			dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = dwc_ep->proc_buf_num;
++
++		data_per_desc =
++		    ((j + 1) * dwc_ep->maxpacket >
++		     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++		    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc +=
++		    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++	} else {
++/** ISO IN EP */
++
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp = 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++		sts.b_iso_in.framenum = dwc_ep->next_frame;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++			dma_ad += dwc_ep->data_per_frame;
++			dma_desc++;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = dwc_ep->proc_buf_num;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++
++		dwc_ep->next_frame =
++		    sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
++	}
++	dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++}
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ * in case Iso out packet was dropped
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP for wihich transfer complete was asserted
++ *
++ */
++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if,
++					   dwc_ep_t * dwc_ep)
++{
++	uint32_t dma_addr;
++	uint32_t drp_pkt;
++	uint32_t drp_pkt_cnt;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	int i;
++
++	deptsiz.d32 =
++	    DWC_READ_REG32(&core_if->dev_if->
++			   out_ep_regs[dwc_ep->num]->doeptsiz);
++
++	drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
++	drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
++
++	/* Setting dropped packets status */
++	for (i = 0; i < drp_pkt_cnt; ++i) {
++		dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA;
++		drp_pkt++;
++		deptsiz.b.pktcnt--;
++	}
++
++	if (deptsiz.b.pktcnt > 0) {
++		deptsiz.b.xfersize =
++		    dwc_ep->xfer_len - (dwc_ep->pkt_cnt -
++					deptsiz.b.pktcnt) * dwc_ep->maxpacket;
++	} else {
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 0;
++	}
++
++	DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz,
++			deptsiz.d32);
++
++	if (deptsiz.b.pktcnt > 0) {
++		if (dwc_ep->proc_buf_num) {
++			dma_addr =
++			    dwc_ep->dma_addr1 + dwc_ep->xfer_len -
++			    deptsiz.b.xfersize;
++		} else {
++			dma_addr =
++			    dwc_ep->dma_addr0 + dwc_ep->xfer_len -
++			    deptsiz.b.xfersize;;
++		}
++
++		DWC_WRITE_REG32(&core_if->dev_if->
++				out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
++
++		/** Re-enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		DWC_MODIFY_REG32(&core_if->dev_if->
++				 out_ep_regs[dwc_ep->num]->doepctl, depctl.d32,
++				 depctl.d32);
++		return 0;
++	} else {
++		return 1;
++	}
++}
++
++/**
++ * This function sets iso packets information(PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	int i, j;
++	dma_addr_t dma_ad;
++	iso_pkt_info_t *packet_info = ep->pkt_info;
++	uint32_t offset;
++	uint32_t frame_data;
++	deptsiz_data_t deptsiz;
++
++	if (ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = ep->dma_addr0;
++	} else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = ep->dma_addr1;
++	}
++
++	if (ep->is_in) {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++				   dieptsiz);
++	} else {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->out_ep_regs[ep->num]->
++				   doeptsiz);
++	}
++
++	if (!deptsiz.b.xfersize) {
++		offset = 0;
++		for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) {
++			frame_data = ep->data_per_frame;
++			for (j = 0; j < ep->pkt_per_frm; ++j) {
++
++				/* Packet status - is not set as initially
++				 * it is set to 0 and if packet was sent
++				 successfully, status field will remain 0*/
++
++				/* Bytes has been transfered */
++				packet_info->length =
++				    (ep->maxpacket <
++				     frame_data) ? ep->maxpacket : frame_data;
++
++				/* Received packet offset */
++				packet_info->offset = offset;
++				offset += packet_info->length;
++				frame_data -= packet_info->length;
++
++				packet_info++;
++			}
++		}
++		return 1;
++	} else {
++		/* This is a workaround for in case of Transfer Complete with
++		 * PktDrpSts interrupts merging - in this case Transfer complete
++		 * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
++		 * set and with DOEPTSIZ register non zero. Investigations showed,
++		 * that this happens when Out packet is dropped, but because of
++		 * interrupts merging during first interrupt handling PktDrpSts
++		 * bit is cleared and for next merged interrupts it is not reset.
++		 * In this case SW hadles the interrupt as if PktDrpSts bit is set.
++		 */
++		if (ep->is_in) {
++			return 1;
++		} else {
++			return handle_iso_out_pkt_dropped(core_if, ep);
++		}
++	}
++}
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ *
++ * @param pcd The PCD
++ * @param ep The EP for which transfer complete was asserted
++ *
++ */
++static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	uint8_t is_last = 0;
++
++	if (ep->dwc_ep.next_frame == 0xffffffff) {
++		DWC_WARN("Next frame is not set!\n");
++		return;
++	}
++
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			set_ddma_iso_pkts_info(core_if, dwc_ep);
++			reinit_ddma_iso_xfer(core_if, dwc_ep);
++			is_last = 1;
++		} else {
++			if (core_if->pti_enh_enable) {
++				if (set_iso_pkts_info(core_if, dwc_ep)) {
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					dwc_otg_iso_ep_start_buf_transfer
++					    (core_if, dwc_ep);
++					is_last = 1;
++				}
++			} else {
++				set_current_pkt_info(core_if, dwc_ep);
++				if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					is_last = 1;
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					if (dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr0;
++					}
++
++				}
++				dwc_otg_iso_ep_start_frm_transfer(core_if,
++								  dwc_ep);
++			}
++		}
++	} else {
++		set_current_pkt_info(core_if, dwc_ep);
++		if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++			is_last = 1;
++			dwc_ep->cur_pkt = 0;
++			dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++			if (dwc_ep->proc_buf_num) {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++			} else {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++			}
++
++		}
++		dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
++	}
++	if (is_last)
++		dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle);
++}
++#endif /* DWC_EN_ISOC */
++
++/**
++ * This function handle BNA interrupt for Non Isochronous EPs
++ *
++ */
++static void dwc_otg_pcd_handle_noniso_bna(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	volatile uint32_t *addr;
++	depctl_data_t depctl = {.d32 = 0 };
++	dwc_otg_pcd_t *pcd = ep->pcd;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	dev_dma_desc_sts_t sts = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = ep->pcd->core_if;
++	int i, start;
++
++	if (!dwc_ep->desc_cnt)
++		DWC_WARN("Ep%d %s Descriptor count = %d \n", dwc_ep->num,
++			 (dwc_ep->is_in ? "IN" : "OUT"), dwc_ep->desc_cnt);
++
++	if (core_if->core_params->cont_on_bna && !dwc_ep->is_in
++							&& dwc_ep->type != DWC_OTG_EP_TYPE_CONTROL) {
++		uint32_t doepdma;
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++			core_if->dev_if->out_ep_regs[dwc_ep->num];
++		doepdma = DWC_READ_REG32(&(out_regs->doepdma));
++		start = (doepdma - dwc_ep->dma_desc_addr)/sizeof(dwc_otg_dev_dma_desc_t);
++		dma_desc = &(dwc_ep->desc_addr[start]);
++	} else {
++		start = 0;
++		dma_desc = dwc_ep->desc_addr;
++	}
++	
++
++	for (i = start; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
++		sts.d32 = dma_desc->status.d32;
++		sts.b.bs = BS_HOST_READY;
++		dma_desc->status.d32 = sts.d32;
++	}
++
++	if (dwc_ep->is_in == 0) {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->
++		    doepctl;
++	} else {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++	depctl.b.epena = 1;
++	depctl.b.cnak = 1;
++	DWC_MODIFY_REG32(addr, 0, depctl.d32);
++}
++
++/**
++ * This function handles EP0 Control transfers.
++ *
++ * The state of the control transfers are tracked in
++ * <code>ep0state</code>.
++ */
++static void handle_ep0(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	dev_dma_desc_sts_t desc_sts;
++	deptsiz0_data_t deptsiz;
++	uint32_t byte_count;
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++	print_ep0_state(pcd);
++#endif
++
++//      DWC_PRINTF("HANDLE EP0\n");
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		break;
++
++	case EP0_IDLE:
++		pcd->request_config = 0;
++
++		pcd_setup(pcd);
++		break;
++
++	case EP0_IN_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
++			    ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"),
++			    ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++
++		if (core_if->dma_enable != 0) {
++			/*
++			 * For EP0 we can only program 1 packet at a time so we
++			 * need to do the make calculations after each complete.
++			 * Call write_packet to make the calculations, as in
++			 * slave mode, and use those values to determine if we
++			 * can complete.
++			 */
++			if (core_if->dma_desc_enable == 0) {
++				deptsiz.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->in_ep_regs[0]->
++						   dieptsiz);
++				byte_count =
++				    ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
++			} else {
++				desc_sts =
++				    core_if->dev_if->in_desc_addr->status;
++				byte_count =
++				    ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
++			}
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		} else if (ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n");
++		} else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++	case EP0_OUT_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
++			    ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"),
++			    ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++		if (core_if->dma_enable != 0) {
++			if (core_if->dma_desc_enable == 0) {
++				deptsiz.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->out_ep_regs[0]->
++						   doeptsiz);
++				byte_count =
++				    ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
++			} else {
++				desc_sts =
++				    core_if->dev_if->out_desc_addr->status;
++				byte_count =
++				    ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
++			}
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		} else if (ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n");
++		} else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++
++	case EP0_IN_STATUS_PHASE:
++	case EP0_OUT_STATUS_PHASE:
++		DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
++		ep0_complete_request(ep0);
++		pcd->ep0state = EP0_IDLE;
++		ep0->stopped = 1;
++		ep0->dwc_ep.is_in = 0;	/* OUT for next SETUP */
++
++		/* Prepare for more SETUP Packets */
++		if (core_if->dma_enable) {
++			ep0_out_start(core_if, pcd);
++		}
++		break;
++
++	case EP0_STALL:
++		DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
++		break;
++	}
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++}
++
++/**
++ * Restart transfer
++ */
++static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if;
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t dieptsiz = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_in_ep(pcd, epnum);
++
++#ifdef DWC_EN_ISOC
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		return;
++	}
++#endif /* DWC_EN_ISOC  */
++
++	core_if = GET_CORE_IF(pcd);
++	dev_if = core_if->dev_if;
++
++	dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++
++	DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x"
++		    " stopped=%d\n", ep->dwc_ep.xfer_buff,
++		    ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped);
++	/*
++	 * If xfersize is 0 and pktcnt in not 0, resend the last packet.
++	 */
++	if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
++	    ep->dwc_ep.start_xfer_buff != 0) {
++		if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		} else {
++			ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
++			/* convert packet size to dwords. */
++			ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		}
++		ep->stopped = 0;
++		DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x "
++			    "xfer_len=%0x stopped=%d\n",
++			    ep->dwc_ep.xfer_buff,
++			    ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len,
++			    ep->stopped);
++		if (epnum == 0) {
++			dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
++		} else {
++			dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++		}
++	}
++}
++
++/*
++ * This function create new nextep sequnce based on Learn Queue.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void predict_nextep_seq( dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_device_global_regs_t *dev_global_regs =
++	    core_if->dev_if->dev_global_regs;
++	const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
++	/* Number of Token Queue Registers */
++	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
++	dtknq1_data_t dtknqr1;
++	uint32_t in_tkn_epnums[4];
++	uint8_t seqnum[MAX_EPS_CHANNELS];
++	uint8_t intkn_seq[TOKEN_Q_DEPTH];
++	grstctl_t resetctl = {.d32 = 0 };
++	uint8_t temp;
++	int ndx = 0;
++	int start = 0;
++	int end = 0;
++	int sort_done = 0;
++	int i = 0;
++	volatile uint32_t *addr = &dev_global_regs->dtknqr1;
++
++
++	DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
++
++	/* Read the DTKNQ Registers */
++	for (i = 0; i < DTKNQ_REG_CNT; i++) {
++		in_tkn_epnums[i] = DWC_READ_REG32(addr);
++		DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1,
++			    in_tkn_epnums[i]);
++		if (addr == &dev_global_regs->dvbusdis) {
++			addr = &dev_global_regs->dtknqr3_dthrctl;
++		} else {
++			++addr;
++		}
++
++	}
++
++	/* Copy the DTKNQR1 data to the bit field. */
++	dtknqr1.d32 = in_tkn_epnums[0];
++	if (dtknqr1.b.wrap_bit) {
++		ndx = dtknqr1.b.intknwptr;
++		end = ndx -1;
++		if (end < 0) 
++			end = TOKEN_Q_DEPTH -1;
++	} else {
++		ndx = 0;
++		end = dtknqr1.b.intknwptr -1;
++		if (end < 0) 
++			end = 0;
++	}
++	start = ndx;
++	
++	/* Fill seqnum[] by initial values: EP number + 31 */
++	for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++		seqnum[i] = i +31;
++	}
++	
++	/* Fill intkn_seq[] from in_tkn_epnums[0] */
++	for (i=0; i < 6; i++) 
++		intkn_seq[i] = (in_tkn_epnums[0] >> ((7-i) * 4)) & 0xf;
++	
++	if (TOKEN_Q_DEPTH > 6) {
++		/* Fill intkn_seq[] from in_tkn_epnums[1] */
++		for (i=6; i < 14; i++) 
++			intkn_seq[i] =
++			    (in_tkn_epnums[1] >> ((7 - (i - 6)) * 4)) & 0xf;
++	}
++	
++	if (TOKEN_Q_DEPTH > 14) {
++		/* Fill intkn_seq[] from in_tkn_epnums[1] */
++		for (i=14; i < 22; i++) 
++			intkn_seq[i] =
++			    (in_tkn_epnums[2] >> ((7 - (i - 14)) * 4)) & 0xf;
++	}
++
++	if (TOKEN_Q_DEPTH > 22) {
++		/* Fill intkn_seq[] from in_tkn_epnums[1] */
++		for (i=22; i < 30; i++) 
++			intkn_seq[i] =
++			    (in_tkn_epnums[3] >> ((7 - (i - 22)) * 4)) & 0xf;
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "%s start=%d end=%d intkn_seq[]:\n", __func__,
++		    start, end);
++	for (i=0; i<TOKEN_Q_DEPTH; i++) 
++		DWC_DEBUGPL(DBG_PCDV,"%d\n", intkn_seq[i]);
++
++	/* Update seqnum based on intkn_seq[] */
++	i = 0;
++	do {
++		seqnum[intkn_seq[ndx]] = i;
++		ndx++;
++		i++;
++		if (ndx == TOKEN_Q_DEPTH) 
++			ndx = 0;
++	} while ( i < TOKEN_Q_DEPTH );
++	
++	/* Mark non active EP's in seqnum[] by 0xff */
++	for (i=0; i<=core_if->dev_if->num_in_eps; i++) {
++		if (core_if->nextep_seq[i] == 0xff )
++			seqnum[i] = 0xff;
++	}
++	
++	/* Sort seqnum[] */
++	sort_done = 0;
++	while (!sort_done) {
++		sort_done = 1;
++		for (i=0; i<core_if->dev_if->num_in_eps; i++) {
++			if (seqnum[i] > seqnum[i+1]) {
++				temp = seqnum[i];
++				seqnum[i] = seqnum[i+1];
++				seqnum[i+1] = temp;
++				sort_done = 0;
++			}
++		}
++	}
++
++	ndx = start + seqnum[0];
++	if (ndx >= TOKEN_Q_DEPTH) 
++		ndx = ndx % TOKEN_Q_DEPTH;
++	core_if->first_in_nextep_seq = intkn_seq[ndx];
++	
++	/* Update seqnum[] by EP numbers  */
++	for (i=0; i<=core_if->dev_if->num_in_eps; i++) {
++		ndx = start + i;
++		if (seqnum[i] < 31) {
++			ndx = start + seqnum[i];
++			if (ndx >= TOKEN_Q_DEPTH) 
++				ndx = ndx % TOKEN_Q_DEPTH;
++			seqnum[i] = intkn_seq[ndx];
++		} else {
++			if (seqnum[i] < 0xff) {
++				seqnum[i] = seqnum[i] - 31;
++			} else {
++				break;
++			}
++		}
++	}
++
++	/* Update nextep_seq[] based on seqnum[] */
++	for (i=0; i<core_if->dev_if->num_in_eps; i++) {
++		if (seqnum[i] != 0xff) {
++			if (seqnum[i+1] != 0xff) {
++				core_if->nextep_seq[seqnum[i]] = seqnum[i+1];
++			} else {
++				core_if->nextep_seq[seqnum[i]] = core_if->first_in_nextep_seq;
++				break;
++			}
++		} else {
++			break;
++		}
++	}
++	
++	DWC_DEBUGPL(DBG_PCDV, "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", 
++		__func__, core_if->first_in_nextep_seq);
++	for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++		DWC_DEBUGPL(DBG_PCDV,"%2d\n", core_if->nextep_seq[i]);
++	}
++
++	/* Flush the Learning Queue */
++	resetctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->grstctl);
++	resetctl.b.intknqflsh = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
++	
++
++}
++
++/**
++ * handle the IN EP disable interrupt.
++ */
++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd,
++					     const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz_data_t dieptsiz = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	gintmsk_data_t gintmsk_data;
++	depctl_data_t depctl;
++	uint32_t diepdma;
++	uint32_t remain_to_transfer = 0;
++	uint8_t i;
++	uint32_t xfer_size;
++	
++	ep = get_in_ep(pcd, epnum);
++	dwc_ep = &ep->dwc_ep;
++
++	if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++		complete_ep(ep);
++		return;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum,
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl));
++	dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++	depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
++
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++		    dieptsiz.b.pktcnt, dieptsiz.b.xfersize);
++	
++	if ((core_if->start_predict == 0) || (depctl.b.eptype & 1)) { 
++		if (ep->stopped) {
++			if (core_if->en_multiple_tx_fifo)
++				/* Flush the Tx FIFO */
++				dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++			/* Clear the Global IN NP NAK */
++			dctl.d32 = 0;
++			dctl.b.cgnpinnak = 1;
++			DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); 
++			/* Restart the transaction */
++			if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) {
++				restart_transfer(pcd, epnum);
++			}
++		} else {
++			/* Restart the transaction */
++			if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) {
++				restart_transfer(pcd, epnum);
++			}
++			DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
++		}
++		return;
++	}
++
++	if (core_if->start_predict > 2) {	// NP IN EP
++		core_if->start_predict--;
++		return;
++	}
++
++	core_if->start_predict--;
++	
++	if (core_if->start_predict == 1) {	// All NP IN Ep's disabled now
++
++		predict_nextep_seq(core_if);
++			
++		/* Update all active IN EP's NextEP field based of nextep_seq[] */
++		for ( i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++			if (core_if->nextep_seq[i] != 0xff) {	// Active NP IN EP
++				depctl.b.nextep = core_if->nextep_seq[i];
++				DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++			}
++		}
++		/* Flush Shared NP TxFIFO */
++		dwc_otg_flush_tx_fifo(core_if, 0);
++		/* Rewind buffers */
++		if (!core_if->dma_desc_enable) {		
++			i = core_if->first_in_nextep_seq;
++			do {
++				ep = get_in_ep(pcd, i);
++				dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
++				xfer_size = ep->dwc_ep.total_len - ep->dwc_ep.xfer_count;
++				if (xfer_size > ep->dwc_ep.maxxfer) 
++					xfer_size = ep->dwc_ep.maxxfer;
++				depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++				if (dieptsiz.b.pktcnt != 0) {
++					if (xfer_size == 0) {
++						remain_to_transfer = 0;
++					} else {
++						if ((xfer_size % ep->dwc_ep.maxpacket) == 0) {
++							remain_to_transfer = 
++								dieptsiz.b.pktcnt * ep->dwc_ep.maxpacket;
++						} else {
++							remain_to_transfer = ((dieptsiz.b.pktcnt -1) * ep->dwc_ep.maxpacket) 
++								+ (xfer_size % ep->dwc_ep.maxpacket);
++						}
++					}
++					diepdma = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepdma);
++					dieptsiz.b.xfersize = remain_to_transfer;
++					DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, dieptsiz.d32);
++					diepdma = ep->dwc_ep.dma_addr + (xfer_size - remain_to_transfer);
++					DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, diepdma);
++				}
++				i = core_if->nextep_seq[i];
++			} while (i != core_if->first_in_nextep_seq);
++		} else { // dma_desc_enable
++				DWC_PRINTF("%s Learning Queue not supported in DDMA\n", __func__);
++		}
++				
++		/* Restart transfers in predicted sequences */
++		i = core_if->first_in_nextep_seq;
++		do {
++			dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
++			depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++			if (dieptsiz.b.pktcnt != 0) {
++				depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++				depctl.b.epena = 1;
++				depctl.b.cnak = 1;
++				DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++			}
++			i = core_if->nextep_seq[i];
++		} while (i != core_if->first_in_nextep_seq);
++
++		/* Clear the global non-periodic IN NAK handshake */
++		dctl.d32 = 0;
++		dctl.b.cgnpinnak = 1;
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); 
++			
++		/* Unmask EP Mismatch interrupt */
++		gintmsk_data.d32 = 0;
++		gintmsk_data.b.epmismatch = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk_data.d32);
++		
++		core_if->start_predict = 0;
++
++	} 
++}
++
++/**
++ * Handler for the IN EP timeout handshake interrupt.
++ */
++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd,
++					     const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++
++#ifdef DEBUG
++	deptsiz_data_t dieptsiz = {.d32 = 0 };
++	uint32_t num = 0;
++#endif
++	dctl_data_t dctl = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	ep = get_in_ep(pcd, epnum);
++
++	/* Disable the NP Tx Fifo Empty Interrrupt */
++	if (!core_if->dma_enable) {
++		intr_mask.b.nptxfempty = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++				 intr_mask.d32, 0);
++	}
++	/** @todo NGS Check EP type.
++	 * Implement for Periodic EPs */
++	/*
++	 * Non-periodic EP
++	 */
++	/* Enable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32);
++
++	/* Set Global IN NAK */
++	dctl.b.sgnpinnak = 1;
++	DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++
++	ep->stopped = 1;
++
++#ifdef DEBUG
++	dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[num]->dieptsiz);
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++		    dieptsiz.b.pktcnt, dieptsiz.b.xfersize);
++#endif
++
++#ifdef DISABLE_PERIODIC_EP
++	/*
++	 * Set the NAK bit for this EP to
++	 * start the disable process.
++	 */
++	diepctl.d32 = 0;
++	diepctl.b.snak = 1;
++	DWC_MODIFY_REG32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32,
++			 diepctl.d32);
++	ep->disabling = 1;
++	ep->stopped = 1;
++#endif
++}
++
++/**
++ * Handler for the IN EP NAK interrupt.
++ */
++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd,
++					    const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	diepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 diepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->diepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP Babble interrupt.
++ */
++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd,
++						const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	doepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n",
++		   "OUT EP Babble");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.babble = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 doepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NAK interrupt.
++ */
++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd,
++					     const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	doepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_ANY, "INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 doepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NYET interrupt.
++ */
++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd,
++					      const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	doepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nyet = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 doepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that an IN EP has a pending Interrupt.
++ * The sequence for handling the IN EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each IN EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DIEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Time-out Handshake" log error
++ * -#	If "IN Token Received when TxFIFO Empty" write packet to Tx
++ *		FIFO.
++ * -#	If "IN Token EP Mismatch" (disable, this is handled by EP
++ *		Mismatch Interrupt)
++ */
++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd)
++{
++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		diepint_data_t diepint = {.d32=0}; \
++		diepint.b.__intr = 1; \
++		DWC_WRITE_REG32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
++		diepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	diepint_data_t diepint = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	uint32_t ep_intr;
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
++
++	/* Service the Device IN interrupts for each endpoint */
++	while (ep_intr) {
++		if (ep_intr & 0x1) {
++			uint32_t empty_msk;
++			/* Get EP pointer */
++			ep = get_in_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
++			empty_msk =
++			    DWC_READ_REG32(&dev_if->
++					   dev_global_regs->dtknqr4_fifoemptymsk);
++
++			DWC_DEBUGPL(DBG_PCDV,
++				    "IN EP INTERRUPT - %d\nepmty_msk - %8x  diepctl - %8x\n",
++				    epnum, empty_msk, depctl.d32);
++
++			DWC_DEBUGPL(DBG_PCD,
++				    "EP%d-%s: type=%d, mps=%d\n",
++				    dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"),
++				    dwc_ep->type, dwc_ep->maxpacket);
++
++			diepint.d32 =
++			    dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
++
++			DWC_DEBUGPL(DBG_PCDV,
++				    "EP %d Interrupt Register - 0x%x\n", epnum,
++				    diepint.d32);
++			/* Transfer complete */
++			if (diepint.b.xfercompl) {
++				/* Disable the NP Tx FIFO Empty
++				 * Interrupt */
++				if (core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					DWC_MODIFY_REG32
++					    (&core_if->core_global_regs->gintmsk,
++					     intr_mask.d32, 0);
++				} else {
++					/* Disable the Tx FIFO Empty Interrupt for this EP */
++					uint32_t fifoemptymsk =
++					    0x1 << dwc_ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 fifoemptymsk, 0);
++				}
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if, epnum, xfercompl);
++
++				/* Complete the transfer */
++				if (epnum == 0) {
++					handle_ep0(pcd);
++				}
++#ifdef DWC_EN_ISOC
++				else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (!ep->stopped)
++						complete_iso_ep(pcd, ep);
++				}
++#endif /* DWC_EN_ISOC */
++#ifdef DWC_UTE_PER_IO
++				else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (!ep->stopped)
++						complete_xiso_ep(ep);
++				}
++#endif /* DWC_UTE_PER_IO */
++				else {
++					if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC && 
++							dwc_ep->bInterval > 1) {
++						dwc_ep->frame_num += dwc_ep->bInterval;
++						if (dwc_ep->frame_num > 0x3FFF)
++						{
++							dwc_ep->frm_overrun = 1;
++							dwc_ep->frame_num &= 0x3FFF;
++						} else 
++							dwc_ep->frm_overrun = 0;
++					}
++					complete_ep(ep);
++					if(diepint.b.nak)
++						CLEAR_IN_EP_INTR(core_if, epnum, nak);
++				}
++			}
++			/* Endpoint disable      */
++			if (diepint.b.epdisabled) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n",
++					    epnum);
++				handle_in_ep_disable_intr(pcd, epnum);
++
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if, epnum, epdisabled);
++			}
++			/* AHB Error */
++			if (diepint.b.ahberr) {
++				DWC_ERROR("EP%d IN AHB Error\n", epnum);
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if, epnum, ahberr);
++			}
++			/* TimeOUT Handshake (non-ISOC IN EPs) */
++			if (diepint.b.timeout) {
++				DWC_ERROR("EP%d IN Time-out\n", epnum);
++				handle_in_ep_timeout_intr(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if, epnum, timeout);
++			}
++			/** IN Token received with TxF Empty */
++			if (diepint.b.intktxfemp) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d IN TKN TxFifo Empty\n",
++					    epnum);
++				if (!ep->stopped && epnum != 0) {
++
++					diepmsk_data_t diepmsk = {.d32 = 0 };
++					diepmsk.b.intktxfemp = 1;
++
++					if (core_if->multiproc_int_enable) {
++						DWC_MODIFY_REG32
++						    (&dev_if->dev_global_regs->diepeachintmsk
++						     [epnum], diepmsk.d32, 0);
++					} else {
++						DWC_MODIFY_REG32
++						    (&dev_if->dev_global_regs->diepmsk,
++						     diepmsk.d32, 0);
++					}
++				} else if (core_if->dma_desc_enable
++					   && epnum == 0
++					   && pcd->ep0state ==
++					   EP0_OUT_STATUS_PHASE) {
++					// EP0 IN set STALL
++					depctl.d32 =
++					    DWC_READ_REG32(&dev_if->in_ep_regs
++							   [epnum]->diepctl);
++
++					/* set the disable and stall bits */
++					if (depctl.b.epena) {
++						depctl.b.epdis = 1;
++					}
++					depctl.b.stall = 1;
++					DWC_WRITE_REG32(&dev_if->in_ep_regs
++							[epnum]->diepctl,
++							depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp);
++			}
++			/** IN Token Received with EP mismatch */
++			if (diepint.b.intknepmis) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d IN TKN EP Mismatch\n", epnum);
++				CLEAR_IN_EP_INTR(core_if, epnum, intknepmis);				
++			}
++			/** IN Endpoint NAK Effective */
++			if (diepint.b.inepnakeff) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d IN EP NAK Effective\n",
++					    epnum);
++				/* Periodic EP */
++				if (ep->disabling) {
++					depctl.d32 = 0;
++					depctl.b.snak = 1;
++					depctl.b.epdis = 1;
++					DWC_MODIFY_REG32(&dev_if->in_ep_regs
++							 [epnum]->diepctl,
++							 depctl.d32,
++							 depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff);
++
++			}
++
++			/** IN EP Tx FIFO Empty Intr */
++			if (diepint.b.emptyintr) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d Tx FIFO Empty Intr \n",
++					    epnum);
++				write_empty_tx_fifo(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if, epnum, emptyintr);
++
++			}
++
++			/** IN EP BNA Intr */
++			if (diepint.b.bna) {
++				CLEAR_IN_EP_INTR(core_if, epnum, bna);
++				if (core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if (dwc_ep->type ==
++					    DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if (dwc_ep->next_frame !=
++						    0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					} else
++#endif				/* DWC_EN_ISOC */
++					{
++						dwc_otg_pcd_handle_noniso_bna(ep);
++					}
++				}
++			}
++			/* NAK Interrutp */
++			if (diepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n",
++					    epnum);
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++					depctl_data_t depctl;
++					if (ep->dwc_ep.frame_num == 0xFFFFFFFF) {
++						ep->dwc_ep.frame_num = core_if->frame_num;
++						if (ep->dwc_ep.bInterval > 1) {
++							depctl.d32 = 0;
++							depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
++							if (ep->dwc_ep.frame_num & 0x1) {
++								depctl.b.setd1pid = 1;
++								depctl.b.setd0pid = 0;
++							} else {
++								depctl.b.setd0pid = 1;
++								depctl.b.setd1pid = 0;
++							}
++							DWC_WRITE_REG32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
++						}
++						start_next_request(ep);
++					}
++					ep->dwc_ep.frame_num += ep->dwc_ep.bInterval;
++					if (dwc_ep->frame_num > 0x3FFF)	{
++						dwc_ep->frm_overrun = 1;
++						dwc_ep->frame_num &= 0x3FFF;
++					} else 
++						dwc_ep->frm_overrun = 0;
++				}
++
++				CLEAR_IN_EP_INTR(core_if, epnum, nak);
++			}
++		}
++		epnum++;
++		ep_intr >>= 1;
++	}
++
++	return 1;
++#undef CLEAR_IN_EP_INTR
++}
++
++/**
++ * This interrupt indicates that an OUT EP has a pending Interrupt.
++ * The sequence for handling the OUT EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each OUT EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DOEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Setup Phase Done" process Setup Packet (See Standard USB
++ *		Command Processing)
++ */
++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd)
++{
++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		doepint_data_t doepint = {.d32=0}; \
++		doepint.b.__intr = 1; \
++		DWC_WRITE_REG32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
++		doepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	uint32_t ep_intr;
++	doepint_data_t doepint = {.d32 = 0 };
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	dctl_data_t dctl = {.d32 = 0 };
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
++
++	while (ep_intr) {
++		if (ep_intr & 0x1) {
++			/* Get EP pointer */
++			ep = get_out_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++#ifdef VERBOSE
++			DWC_DEBUGPL(DBG_PCDV,
++				    "EP%d-%s: type=%d, mps=%d\n",
++				    dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"),
++				    dwc_ep->type, dwc_ep->maxpacket);
++#endif
++			doepint.d32 =
++			    dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
++			/* Moved this interrupt upper due to core deffect of asserting
++			 * OUT EP 0 xfercompl along with stsphsrcvd in BDMA */
++			if (doepint.b.stsphsercvd) {
++				deptsiz0_data_t deptsiz;
++				CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd);
++				deptsiz.d32 =
++				    DWC_READ_REG32(&core_if->dev_if->
++						   out_ep_regs[0]->doeptsiz);
++				if (core_if->snpsid >= OTG_CORE_REV_3_00a
++				    && core_if->dma_enable
++				    && core_if->dma_desc_enable == 0
++				    && doepint.b.xfercompl
++				    && deptsiz.b.xfersize == 24) {
++					CLEAR_OUT_EP_INTR(core_if, epnum,
++							  xfercompl);
++					doepint.b.xfercompl = 0;
++					ep0_out_start(core_if, pcd);
++				}
++				if ((core_if->dma_desc_enable) ||
++				    (core_if->dma_enable
++				     && core_if->snpsid >=
++				     OTG_CORE_REV_3_00a)) {
++					do_setup_in_status_phase(pcd);
++				}
++			}
++			/* Transfer complete */
++			if (doepint.b.xfercompl) {
++
++				if (epnum == 0) {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl);
++					if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++						DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n",
++							DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepint),
++							doepint.d32);
++						DWC_DEBUGPL(DBG_PCDV, "DOEPCTL=%x \n",
++							DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepctl));
++
++						if (core_if->snpsid >= OTG_CORE_REV_3_00a
++							&& core_if->dma_enable == 0) {
++							doepint_data_t doepint;
++							doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++														out_ep_regs[0]->doepint);
++							if (pcd->ep0state == EP0_IDLE && doepint.b.sr) {
++								CLEAR_OUT_EP_INTR(core_if, epnum, sr);
++								goto exit_xfercompl;
++							}
++						}
++						/* In case of DDMA  look at SR bit to go to the Data Stage */
++						if (core_if->dma_desc_enable) {
++							dev_dma_desc_sts_t status = {.d32 = 0};
++							if (pcd->ep0state == EP0_IDLE) {
++								status.d32 = core_if->dev_if->setup_desc_addr[core_if->
++											dev_if->setup_desc_index]->status.d32;
++								if(pcd->data_terminated) {
++									 pcd->data_terminated = 0;
++									 status.d32 = core_if->dev_if->out_desc_addr->status.d32;
++									 dwc_memcpy(&pcd->setup_pkt->req, pcd->backup_buf, 8);
++								}
++								if (status.b.sr) {
++									if (doepint.b.setup) {
++										DWC_DEBUGPL(DBG_PCDV, "DMA DESC EP0_IDLE SR=1 setup=1\n");
++										/* Already started data stage, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										/* Prepare for more setup packets */
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE ||
++											pcd->ep0state == EP0_IN_DATA_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_PCDV,
++											"EP0_IDLE SR=1 setup=0 new setup comes\n");
++										ep0_out_start(core_if, pcd);
++									}
++								}
++							} else {
++								dwc_otg_pcd_request_t *req;
++								dev_dma_desc_sts_t status = {.d32 = 0};
++								diepint_data_t diepint0;
++								diepint0.d32 = DWC_READ_REG32(&core_if->dev_if->
++															in_ep_regs[0]->diepint);
++
++								if (pcd->ep0state == EP0_STALL || pcd->ep0state == EP0_DISCONNECT) {
++									DWC_ERROR("EP0 is stalled/disconnected\n");
++								}
++
++								/* Clear IN xfercompl if set */
++								if (diepint0.b.xfercompl && (pcd->ep0state == EP0_IN_STATUS_PHASE
++									|| pcd->ep0state == EP0_IN_DATA_PHASE)) {
++									DWC_WRITE_REG32(&core_if->dev_if->
++										in_ep_regs[0]->diepint, diepint0.d32);
++								}
++
++								status.d32 = core_if->dev_if->setup_desc_addr[core_if->
++									dev_if->setup_desc_index]->status.d32;
++
++								if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len
++									&& (pcd->ep0state == EP0_OUT_DATA_PHASE))
++									status.d32 = core_if->dev_if->out_desc_addr->status.d32;
++								if (pcd->ep0state == EP0_OUT_STATUS_PHASE)
++									status.d32 = status.d32 = core_if->dev_if->
++									out_desc_addr->status.d32;
++
++								if (status.b.sr) {
++									if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++										DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n");
++									} else {
++										DWC_DEBUGPL(DBG_PCDV, "complete req!!\n");
++										req = DWC_CIRCLEQ_FIRST(&ep->queue);
++										if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len &&
++											pcd->ep0state == EP0_OUT_DATA_PHASE) {
++												/* Read arrived setup packet from req->buf */
++												dwc_memcpy(&pcd->setup_pkt->req,
++													req->buf + ep->dwc_ep.xfer_count, 8);
++										}
++										req->actual = ep->dwc_ep.xfer_count;
++										dwc_otg_request_done(ep, req, -ECONNRESET);
++										ep->dwc_ep.start_xfer_buff = 0;
++										ep->dwc_ep.xfer_buff = 0;
++										ep->dwc_ep.xfer_len = 0;
++									}
++									pcd->ep0state = EP0_IDLE;
++									if (doepint.b.setup) {
++										DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n");
++										/* Data stage started, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										/* Prepare for setup packets if ep0in was enabled*/
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_PCDV,
++											"EP0_IDLE SR=1 setup=0 new setup comes 2\n");
++										ep0_out_start(core_if, pcd);
++									}
++								}
++							}
++						}
++						if (core_if->snpsid >= OTG_CORE_REV_2_94a && core_if->dma_enable
++							&& core_if->dma_desc_enable == 0) {
++							doepint_data_t doepint_temp = {.d32 = 0};
++							deptsiz0_data_t doeptsize0 = {.d32 = 0 };
++							doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if->
++															out_ep_regs[ep->dwc_ep.num]->doepint);
++							doeptsize0.d32 = DWC_READ_REG32(&core_if->dev_if->
++															out_ep_regs[ep->dwc_ep.num]->doeptsiz);
++							if (pcd->ep0state == EP0_IDLE) {
++								if (doepint_temp.b.sr) {
++									CLEAR_OUT_EP_INTR(core_if, epnum, sr);
++								}
++									doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++																	out_ep_regs[0]->doepint);
++									if (doeptsize0.b.supcnt == 3) {
++										DWC_DEBUGPL(DBG_ANY, "Rolling over!!!!!!!\n");
++										ep->dwc_ep.stp_rollover = 1;
++									}
++									if (doepint.b.setup) {
++retry:
++										/* Already started data stage, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										ep->dwc_ep.stp_rollover = 0;
++										/* Prepare for more setup packets */
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE ||
++											pcd->ep0state == EP0_IN_DATA_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_ANY,
++											"EP0_IDLE SR=1 setup=0 new setup comes\n");
++										doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++																	out_ep_regs[0]->doepint);
++										if(doepint.b.setup)
++											goto retry;
++										ep0_out_start(core_if, pcd);
++									}
++							} else {
++								dwc_otg_pcd_request_t *req;
++								diepint_data_t diepint0 = {.d32 = 0};
++								doepint_data_t doepint_temp = {.d32 = 0};
++								depctl_data_t diepctl0;
++								diepint0.d32 = DWC_READ_REG32(&core_if->dev_if->
++																in_ep_regs[0]->diepint);
++								diepctl0.d32 = DWC_READ_REG32(&core_if->dev_if->
++																in_ep_regs[0]->diepctl);
++
++								if (pcd->ep0state == EP0_IN_DATA_PHASE
++									|| pcd->ep0state == EP0_IN_STATUS_PHASE) {
++									if (diepint0.b.xfercompl) {
++										DWC_WRITE_REG32(&core_if->dev_if->
++											in_ep_regs[0]->diepint, diepint0.d32);
++									}
++									if (diepctl0.b.epena) {
++										diepint_data_t diepint = {.d32 = 0};
++										diepctl0.b.snak = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->
++														in_ep_regs[0]->diepctl, diepctl0.d32);
++										do {
++											dwc_udelay(10);
++											diepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++												in_ep_regs[0]->diepint);
++										} while (!diepint.b.inepnakeff);
++										diepint.b.inepnakeff = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->
++											in_ep_regs[0]->diepint, diepint.d32);
++										diepctl0.d32 = 0;
++										diepctl0.b.epdis = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl,
++														diepctl0.d32);
++										do {
++											dwc_udelay(10);
++											diepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++												in_ep_regs[0]->diepint);
++										} while (!diepint.b.epdisabled);
++										diepint.b.epdisabled = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepint,
++															diepint.d32);
++									}
++								}
++								doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if->
++																out_ep_regs[ep->dwc_ep.num]->doepint);
++								if (doepint_temp.b.sr) {
++									CLEAR_OUT_EP_INTR(core_if, epnum, sr);
++									if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++										DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n");
++									} else {
++										DWC_DEBUGPL(DBG_PCDV, "complete req!!\n");
++										req = DWC_CIRCLEQ_FIRST(&ep->queue);
++										if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len &&
++											pcd->ep0state == EP0_OUT_DATA_PHASE) {
++												/* Read arrived setup packet from req->buf */
++												dwc_memcpy(&pcd->setup_pkt->req,
++													req->buf + ep->dwc_ep.xfer_count, 8);
++										}
++										req->actual = ep->dwc_ep.xfer_count;
++										dwc_otg_request_done(ep, req, -ECONNRESET);
++										ep->dwc_ep.start_xfer_buff = 0;
++										ep->dwc_ep.xfer_buff = 0;
++										ep->dwc_ep.xfer_len = 0;
++									}
++									pcd->ep0state = EP0_IDLE;
++									if (doepint.b.setup) {
++										DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n");
++										/* Data stage started, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										/* Prepare for setup packets if ep0in was enabled*/
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_PCDV,
++											"EP0_IDLE SR=1 setup=0 new setup comes 2\n");
++										ep0_out_start(core_if, pcd);
++									}
++								}
++							}
++						}
++						if (core_if->dma_enable == 0 || pcd->ep0state != EP0_IDLE)
++							handle_ep0(pcd);
++exit_xfercompl:
++						DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n",
++							dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep), doepint.d32);
++					} else {
++					if (core_if->dma_desc_enable == 0
++					    || pcd->ep0state != EP0_IDLE)
++						handle_ep0(pcd);
++					}
++#ifdef DWC_EN_ISOC
++				} else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (doepint.b.pktdrpsts == 0) {
++						/* Clear the bit in DOEPINTn for this interrupt */
++						CLEAR_OUT_EP_INTR(core_if,
++								  epnum,
++								  xfercompl);
++						complete_iso_ep(pcd, ep);
++					} else {
++
++						doepint_data_t doepint = {.d32 = 0 };
++						doepint.b.xfercompl = 1;
++						doepint.b.pktdrpsts = 1;
++						DWC_WRITE_REG32
++						    (&core_if->dev_if->out_ep_regs
++						     [epnum]->doepint,
++						     doepint.d32);
++						if (handle_iso_out_pkt_dropped
++						    (core_if, dwc_ep)) {
++							complete_iso_ep(pcd,
++									ep);
++						}
++					}
++#endif /* DWC_EN_ISOC */
++#ifdef DWC_UTE_PER_IO
++				} else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl);
++					if (!ep->stopped)
++						complete_xiso_ep(ep);
++#endif /* DWC_UTE_PER_IO */
++				} else {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if, epnum,
++							  xfercompl);
++
++					if (core_if->core_params->dev_out_nak) {
++						DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[epnum]);
++						pcd->core_if->ep_xfer_info[epnum].state = 0;
++#ifdef DEBUG
++						print_memory_payload(pcd, dwc_ep);
++#endif
++					}
++					complete_ep(ep);						
++				}
++
++			}
++
++			/* Endpoint disable      */
++			if (doepint.b.epdisabled) {
++
++				/* Clear the bit in DOEPINTn for this interrupt */
++				CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled);
++				if (core_if->core_params->dev_out_nak) {
++#ifdef DEBUG
++					print_memory_payload(pcd, dwc_ep);
++#endif
++					/* In case of timeout condition */
++					if (core_if->ep_xfer_info[epnum].state == 2) {
++						dctl.d32 = DWC_READ_REG32(&core_if->dev_if->
++										dev_global_regs->dctl);
++						dctl.b.cgoutnak = 1;
++						DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
++																dctl.d32);
++						/* Unmask goutnakeff interrupt which was masked
++						 * during handle nak out interrupt */
++						gintmsk.b.goutnakeff = 1;
++						DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++																0, gintmsk.d32);
++					
++						complete_ep(ep);
++					}
++				}
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC)
++				{
++					dctl_data_t dctl;
++					gintmsk_data_t intr_mask = {.d32 = 0};
++					dwc_otg_pcd_request_t *req = 0;
++
++					dctl.d32 = DWC_READ_REG32(&core_if->dev_if->
++						dev_global_regs->dctl);
++					dctl.b.cgoutnak = 1;
++					DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
++						dctl.d32);
++
++					intr_mask.d32 = 0;
++					intr_mask.b.incomplisoout = 1;	   
++
++					/* Get any pending requests */
++					if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++						req = DWC_CIRCLEQ_FIRST(&ep->queue);
++						if (!req) {
++							DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
++						} else {
++							dwc_otg_request_done(ep, req, 0);
++							start_next_request(ep);
++						}
++					} else {
++						DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
++					}
++				}
++			}
++			/* AHB Error */
++			if (doepint.b.ahberr) {
++				DWC_ERROR("EP%d OUT AHB Error\n", epnum);
++				DWC_ERROR("EP%d DEPDMA=0x%08x \n",
++					  epnum, core_if->dev_if->out_ep_regs[epnum]->doepdma);
++				CLEAR_OUT_EP_INTR(core_if, epnum, ahberr);
++			}
++			/* Setup Phase Done (contorl EPs) */
++			if (doepint.b.setup) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", epnum);
++#endif
++				CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++
++				handle_ep0(pcd);
++			}
++
++			/** OUT EP BNA Intr */
++			if (doepint.b.bna) {
++				CLEAR_OUT_EP_INTR(core_if, epnum, bna);
++				if (core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if (dwc_ep->type ==
++					    DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if (dwc_ep->next_frame !=
++						    0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					} else
++#endif				/* DWC_EN_ISOC */
++					{
++						dwc_otg_pcd_handle_noniso_bna(ep);
++					}
++				}
++			}
++			/* Babble Interrupt */
++			if (doepint.b.babble) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n",
++					    epnum);
++				handle_out_ep_babble_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if, epnum, babble);
++			}
++			if (doepint.b.outtknepdis) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT Token received when EP is \
++					disabled\n",epnum);
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++					doepmsk_data_t doepmsk = {.d32 = 0};
++					ep->dwc_ep.frame_num = core_if->frame_num;
++					if (ep->dwc_ep.bInterval > 1) {
++						depctl_data_t depctl;
++						depctl.d32 = DWC_READ_REG32(&core_if->dev_if->
++													out_ep_regs[epnum]->doepctl);
++						if (ep->dwc_ep.frame_num & 0x1) {
++							depctl.b.setd1pid = 1;
++							depctl.b.setd0pid = 0;
++						} else {
++							depctl.b.setd0pid = 1;
++							depctl.b.setd1pid = 0;
++						}
++						DWC_WRITE_REG32(&core_if->dev_if->
++										out_ep_regs[epnum]->doepctl, depctl.d32);
++					}
++					start_next_request(ep);
++					doepmsk.b.outtknepdis = 1;
++					DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 
++								 doepmsk.d32, 0);
++				}
++				CLEAR_OUT_EP_INTR(core_if, epnum, outtknepdis);
++			}
++			
++			/* NAK Interrutp */
++			if (doepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum);
++				handle_out_ep_nak_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if, epnum, nak);
++			}
++			/* NYET Interrutp */
++			if (doepint.b.nyet) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum);
++				handle_out_ep_nyet_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if, epnum, nyet);
++			}
++		}
++
++		epnum++;
++		ep_intr >>= 1;
++	}
++
++	return 1;
++
++#undef CLEAR_OUT_EP_INTR
++}
++static int drop_transfer(uint32_t trgt_fr, uint32_t curr_fr, uint8_t frm_overrun)
++{
++	int retval = 0;
++	if(!frm_overrun && curr_fr >= trgt_fr) 
++		retval = 1;
++	else if (frm_overrun
++		 && (curr_fr >= trgt_fr && ((curr_fr - trgt_fr) < 0x3FFF / 2)))
++		retval = 1;
++	return retval;
++}
++/**
++ * Incomplete ISO IN Transfer Interrupt.
++ * This interrupt indicates one of the following conditions occurred
++ * while transmitting an ISOC transaction.
++ * - Corrupted IN Token for ISOC EP.
++ * - Packet not complete in FIFO.
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Disable EP; when "Endpoint Disabled" interrupt is received
++ *		Flush FIFO
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dsts_data_t dsts = {.d32 = 0 };
++	dwc_ep_t *dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for (i = 1; i <= dev_if->num_in_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			deptsiz.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++
++			if (depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
++				if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if (dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr0;
++					}
++
++				}
++
++				dsts.d32 =
++				    DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
++						   dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF
++								  (pcd),
++								  dwc_ep);
++			}
++		}
++	}
++
++#else
++	depctl_data_t depctl = {.d32 = 0 };
++	dwc_ep_t *dwc_ep;
++	dwc_otg_dev_if_t *dev_if;
++	int i;
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	DWC_DEBUGPL(DBG_PCD,"Incomplete ISO IN \n");
++	
++	for (i = 1; i <= dev_if->num_in_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i-1].dwc_ep;
++		depctl.d32 =
++			DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			if (drop_transfer(dwc_ep->frame_num, GET_CORE_IF(pcd)->frame_num, 
++							dwc_ep->frm_overrun))
++			{
++				depctl.d32 =
++					DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++				depctl.b.snak = 1;
++				depctl.b.epdis = 1;
++				DWC_MODIFY_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32, depctl.d32);
++			}
++		}
++	}
++
++	/*intr_mask.b.incomplisoin = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);	 */
++#endif				//DWC_EN_ISOC
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoin = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Incomplete ISO OUT Transfer Interrupt.
++ *
++ * This interrupt indicates that the core has dropped an ISO OUT
++ * packet. The following conditions can be the cause:
++ * - FIFO Full, the entire packet would not fit in the FIFO.
++ * - CRC Error
++ * - Corrupted Token
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Read any data from the FIFO
++ *	-#	Disable EP. When "Endpoint Disabled" interrupt is received
++ *		re-enable EP.
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd)
++{
++
++	gintsts_data_t gintsts;
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dsts_data_t dsts = {.d32 = 0 };
++	dwc_ep_t *dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for (i = 1; i <= dev_if->num_out_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if (pcd->out_ep[i].dwc_ep.active &&
++		    pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++			deptsiz.d32 =
++			    DWC_READ_REG32(&dev_if->out_ep_regs[i]->doeptsiz);
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
++
++			if (depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd),
++						     &pcd->out_ep[i].dwc_ep);
++				if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if (dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr0;
++					}
++
++				}
++
++				dsts.d32 =
++				    DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
++						   dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF
++								  (pcd),
++								  dwc_ep);
++			}
++		}
++	}
++#else
++	/** @todo implement ISR */
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++	dwc_ep_t *dwc_ep = NULL;
++	int i;
++	core_if = GET_CORE_IF(pcd);
++
++	for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++		dwc_ep = &pcd->out_ep[i].dwc_ep;
++		depctl.d32 =
++			DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl);
++		if (depctl.b.epena && depctl.b.dpid == (core_if->frame_num & 0x1)) {
++			core_if->dev_if->isoc_ep = dwc_ep;	
++			deptsiz.d32 =
++					DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
++				break;
++		}
++	}
++	dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	intr_mask.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++
++	if (!intr_mask.b.goutnakeff) {
++		/* Unmask it */
++		intr_mask.b.goutnakeff = 1;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32);
++ 	}
++	if (!gintsts.b.goutnakeff) {
++		dctl.b.sgoutnak = 1;
++	}
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++
++	depctl.d32 = DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl);
++	if (depctl.b.epena) {
++		depctl.b.epdis = 1;
++		depctl.b.snak = 1;
++	}
++	DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, depctl.d32);
++
++	intr_mask.d32 = 0;
++	intr_mask.b.incomplisoout = 1;
++		
++#endif /* DWC_EN_ISOC */
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoout = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Global IN NAK Effective interrupt.
++ *
++ */
++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	depctl_data_t diepctl = {.d32 = 0 };
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	int i;
++
++	DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
++
++	/* Disable all active IN EPs */
++	for (i = 0; i <= dev_if->num_in_eps; i++) {
++		diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++		if (!(diepctl.b.eptype & 1) && diepctl.b.epena) {
++			if (core_if->start_predict > 0)
++				core_if->start_predict++;
++			diepctl.b.epdis = 1;
++			diepctl.b.snak = 1;
++			DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, diepctl.d32);
++		}						
++	}
++	
++
++	/* Disable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.ginnakeff = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * OUT NAK Effective.
++ *
++ */
++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	depctl_data_t doepctl;
++	int i;
++
++	/* Disable the Global OUT NAK Effective Interrupt */
++	intr_mask.b.goutnakeff = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++		intr_mask.d32, 0);
++	
++	/* If DEV OUT NAK enabled*/
++	if (pcd->core_if->core_params->dev_out_nak) {
++		/* Run over all out endpoints to determine the ep number on
++		 * which the timeout has happened 
++		 */
++		for (i = 0; i <= dev_if->num_out_eps; i++) {
++			if ( pcd->core_if->ep_xfer_info[i].state == 2 )
++				break;
++		}
++		if (i > dev_if->num_out_eps) {
++			dctl_data_t dctl;
++			dctl.d32 =
++			    DWC_READ_REG32(&dev_if->dev_global_regs->dctl);
++			dctl.b.cgoutnak = 1;
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl,
++				dctl.d32);
++			goto out;
++		}
++
++		/* Disable the endpoint */
++		doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
++		if (doepctl.b.epena) {
++			doepctl.b.epdis = 1;
++			doepctl.b.snak = 1;
++		}
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32);
++		return 1;
++	}
++	/* We come here from Incomplete ISO OUT handler */
++	if (dev_if->isoc_ep) {
++		dwc_ep_t *dwc_ep = (dwc_ep_t *)dev_if->isoc_ep;
++		uint32_t epnum = dwc_ep->num;
++		doepint_data_t doepint;
++		doepint.d32 =
++		    DWC_READ_REG32(&dev_if->out_ep_regs[dwc_ep->num]->doepint);
++		dev_if->isoc_ep = NULL;
++		doepctl.d32 =
++		    DWC_READ_REG32(&dev_if->out_ep_regs[epnum]->doepctl);
++		DWC_PRINTF("Before disable DOEPCTL = %08x\n", doepctl.d32);
++		if (doepctl.b.epena) {
++			doepctl.b.epdis = 1;
++			doepctl.b.snak = 1;
++		}
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[epnum]->doepctl,
++				doepctl.d32);
++		return 1;
++	} else
++		DWC_PRINTF("INTERRUPT Handler not implemented for %s\n",
++			   "Global OUT NAK Effective\n");
++	
++out:
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.goutnakeff = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * PCD interrupt handler.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ *
++ * All interrupt registers are processed from LSB to MSB.
++ *
++ */
++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++#ifdef VERBOSE
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++#endif
++	gintsts_data_t gintr_status;
++	int32_t retval = 0;
++
++	/* Exit from ISR if core is hibernated */
++	if (core_if->hibernation_suspend == 1) {
++		return retval;
++	}
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x	 gintmsk=%08x\n",
++		    __func__,
++		    DWC_READ_REG32(&global_regs->gintsts),
++		    DWC_READ_REG32(&global_regs->gintmsk));
++#endif
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		DWC_SPINLOCK(pcd->lock);
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x  gintmsk=%08x\n",
++			    __func__,
++			    DWC_READ_REG32(&global_regs->gintsts),
++			    DWC_READ_REG32(&global_regs->gintmsk));
++#endif
++
++		gintr_status.d32 = dwc_otg_read_core_intr(core_if);
++
++		DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
++			    __func__, gintr_status.d32);
++
++		if (gintr_status.b.sofintr) {
++			retval |= dwc_otg_pcd_handle_sof_intr(pcd);
++		}
++		if (gintr_status.b.rxstsqlvl) {
++			retval |=
++			    dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
++		}
++		if (gintr_status.b.nptxfempty) {
++			retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
++		}
++		if (gintr_status.b.goutnakeff) {
++			retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
++		}
++		if (gintr_status.b.i2cintr) {
++			retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
++		}
++		if (gintr_status.b.erlysuspend) {
++			retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
++		}
++		if (gintr_status.b.usbreset) {
++			retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
++		}
++		if (gintr_status.b.enumdone) {
++			retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
++		}
++		if (gintr_status.b.isooutdrop) {
++			retval |=
++			    dwc_otg_pcd_handle_isoc_out_packet_dropped_intr
++			    (pcd);
++		}
++		if (gintr_status.b.eopframe) {
++			retval |=
++			    dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
++		}
++		if (gintr_status.b.inepint) {
++			if (!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.outepintr) {
++			if (!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.epmismatch) {
++			retval |= dwc_otg_pcd_handle_ep_mismatch_intr(pcd);
++		}
++		if (gintr_status.b.fetsusp) {
++			retval |= dwc_otg_pcd_handle_ep_fetsusp_intr(pcd);
++		}
++		if (gintr_status.b.ginnakeff) {
++			retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
++		}
++		if (gintr_status.b.incomplisoin) {
++			retval |=
++			    dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
++		}
++		if (gintr_status.b.incomplisoout) {
++			retval |=
++			    dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
++		}
++
++		/* In MPI mode Device Endpoints interrupts are asserted
++		 * without setting outepintr and inepint bits set, so these
++		 * Interrupt handlers are called without checking these bit-fields
++		 */
++		if (core_if->multiproc_int_enable) {
++			retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++		}
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
++			    DWC_READ_REG32(&global_regs->gintsts));
++#endif
++		DWC_SPINUNLOCK(pcd->lock);
++	}
++	return retval;
++}
++
++#endif /* DWC_HOST_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1358 @@
++ /* ==========================================================================
++  * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $
++  * $Revision: #21 $
++  * $Date: 2012/08/10 $
++  * $Change: 2047372 $
++  *
++  * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++  * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++  * otherwise expressly agreed to in writing between Synopsys and you.
++  *
++  * The Software IS NOT an item of Licensed Software or Licensed Product under
++  * any End User Software License Agreement or Agreement for Licensed Product
++  * with Synopsys or any supplement thereto. You are permitted to use and
++  * redistribute this Software in source and binary forms, with or without
++  * modification, provided that redistributions of source code must retain this
++  * notice. You may not view, use, disclose, copy or distribute this file or
++  * any information contained herein except pursuant to this license grant from
++  * Synopsys. If you do not agree with this notice, including the disclaimer
++  * below, then you are not authorized to use the Software.
++  *
++  * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++  * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++  * DAMAGE.
++  * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++/** @file
++ * This file implements the Peripheral Controller Driver.
++ *
++ * The Peripheral Controller Driver (PCD) is responsible for
++ * translating requests from the Function Driver into the appropriate
++ * actions on the DWC_otg controller. It isolates the Function Driver
++ * from the specifics of the controller by providing an API to the
++ * Function Driver.
++ *
++ * The Peripheral Controller Driver for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used.
++ * (Gadget Driver is the Linux terminology for a Function Driver.)
++ *
++ * The Linux Gadget API is defined in the header file
++ * <code><linux/usb_gadget.h></code>.  The USB EP operations API is
++ * defined in the structure <code>usb_ep_ops</code> and the USB
++ * Controller API is defined in the structure
++ * <code>usb_gadget_ops</code>.
++ *
++ */
++
++#include "dwc_otg_os_dep.h"
++#include "dwc_otg_pcd_if.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_dbg.h"
++
++static struct gadget_wrapper {
++	dwc_otg_pcd_t *pcd;
++
++	struct usb_gadget gadget;
++	struct usb_gadget_driver *driver;
++
++	struct usb_ep ep0;
++	struct usb_ep in_ep[16];
++	struct usb_ep out_ep[16];
++
++} *gadget_wrapper;
++
++/* Display the contents of the buffer */
++extern void dump_msg(const u8 * buf, unsigned int length);
++/**
++ * Get the dwc_otg_pcd_ep_t* from usb_ep* pointer - NULL in case
++ * if the endpoint is not found
++ */
++static struct dwc_otg_pcd_ep *ep_from_handle(dwc_otg_pcd_t * pcd, void *handle)
++{
++	int i;
++	if (pcd->ep0.priv == handle) {
++		return &pcd->ep0;
++	}
++
++	for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) {
++		if (pcd->in_ep[i].priv == handle)
++			return &pcd->in_ep[i];
++		if (pcd->out_ep[i].priv == handle)
++			return &pcd->out_ep[i];
++	}
++
++	return NULL;
++}
++
++/* USB Endpoint Operations */
++/*
++ * The following sections briefly describe the behavior of the Gadget
++ * API endpoint operations implemented in the DWC_otg driver
++ * software. Detailed descriptions of the generic behavior of each of
++ * these functions can be found in the Linux header file
++ * include/linux/usb_gadget.h.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
++ * function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper
++ * functions. Within each section, the corresponding DWC_otg PCD
++ * function name is specified.
++ *
++ */
++
++/**
++ * This function is called by the Gadget Driver for each EP to be
++ * configured for the current configuration (SET_CONFIGURATION).
++ *
++ * This function initializes the dwc_otg_ep_t data structure, and then
++ * calls dwc_otg_ep_activate.
++ */
++static int ep_enable(struct usb_ep *usb_ep,
++		     const struct usb_endpoint_descriptor *ep_desc)
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc);
++
++	if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
++		DWC_WARN("%s, bad ep or descriptor\n", __func__);
++		return -EINVAL;
++	}
++	if (usb_ep == &gadget_wrapper->ep0) {
++		DWC_WARN("%s, bad ep(0)\n", __func__);
++		return -EINVAL;
++	}
++
++	/* Check FIFO size? */
++	if (!ep_desc->wMaxPacketSize) {
++		DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
++		return -ERANGE;
++	}
++
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	/* Delete after check - MAS */
++#if 0
++	nat = (uint32_t) ep_desc->wMaxPacketSize;
++	printk(KERN_ALERT "%s: nat (before) =%d\n", __func__, nat);
++	nat = (nat >> 11) & 0x03;
++	printk(KERN_ALERT "%s: nat (after) =%d\n", __func__, nat);
++#endif
++	retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd,
++				       (const uint8_t *)ep_desc,
++				       (void *)usb_ep);
++	if (retval) {
++		DWC_WARN("dwc_otg_pcd_ep_enable failed\n");
++		return -EINVAL;
++	}
++
++	usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize);
++
++	return 0;
++}
++
++/**
++ * This function is called when an EP is disabled due to disconnect or
++ * change in configuration. Any pending requests will terminate with a
++ * status of -ESHUTDOWN.
++ *
++ * This function modifies the dwc_otg_ep_t data structure for this EP,
++ * and then calls dwc_otg_ep_deactivate.
++ */
++static int ep_disable(struct usb_ep *usb_ep)
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep);
++	if (!usb_ep) {
++		DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
++			    usb_ep ? usb_ep->name : NULL);
++		return -EINVAL;
++	}
++
++	retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep);
++	if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++
++/**
++ * This function allocates a request object to use with the specified
++ * endpoint.
++ *
++ * @param ep The endpoint to be used with with the request
++ * @param gfp_flags the GFP_* flags to use.
++ */
++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
++						     gfp_t gfp_flags)
++{
++	struct usb_request *usb_req;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags);
++	if (0 == ep) {
++		DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
++		return 0;
++	}
++	usb_req = kmalloc(sizeof(*usb_req), gfp_flags);
++	if (0 == usb_req) {
++		DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n");
++		return 0;
++	}
++	memset(usb_req, 0, sizeof(*usb_req));
++	usb_req->dma = DWC_DMA_ADDR_INVALID;
++
++	return usb_req;
++}
++
++/**
++ * This function frees a request object.
++ *
++ * @param ep The endpoint associated with the request
++ * @param req The request being freed
++ */
++static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req)
++{
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req);
++
++	if (0 == ep || 0 == req) {
++		DWC_WARN("%s() %s\n", __func__,
++			 "Invalid ep or req argument!\n");
++		return;
++	}
++
++	kfree(req);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++/**
++ * This function allocates an I/O buffer to be used for a transfer
++ * to/from the specified endpoint.
++ *
++ * @param usb_ep The endpoint to be used with with the request
++ * @param bytes The desired number of bytes for the buffer
++ * @param dma Pointer to the buffer's DMA address; must be valid
++ * @param gfp_flags the GFP_* flags to use.
++ * @return address of a new buffer or null is buffer could not be allocated.
++ */
++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
++				      dma_addr_t * dma, gfp_t gfp_flags)
++{
++	void *buf;
++	dwc_otg_pcd_t *pcd = 0;
++
++	pcd = gadget_wrapper->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
++		    dma, gfp_flags);
++
++	/* Check dword alignment */
++	if ((bytes & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer size is not a multiple of"
++			 "DWORD size (%d)", __func__, bytes);
++	}
++
++	buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags);
++
++	/* Check dword alignment */
++	if (((int)buf & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
++			 __func__, buf);
++	}
++
++	return buf;
++}
++
++/**
++ * This function frees an I/O buffer that was allocated by alloc_buffer.
++ *
++ * @param usb_ep the endpoint associated with the buffer
++ * @param buf address of the buffer
++ * @param dma The buffer's DMA address
++ * @param bytes The number of bytes of the buffer
++ */
++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
++				    dma_addr_t dma, unsigned bytes)
++{
++	dwc_otg_pcd_t *pcd = 0;
++
++	pcd = gadget_wrapper->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes);
++
++	dma_free_coherent(NULL, bytes, buf, dma);
++}
++#endif
++
++/**
++ * This function is used to submit an I/O Request to an EP.
++ *
++ *	- When the request completes the request's completion callback
++ *	  is called to return the request to the driver.
++ *	- An EP, except control EPs, may have multiple requests
++ *	  pending.
++ *	- Once submitted the request cannot be examined or modified.
++ *	- Each request is turned into one or more packets.
++ *	- A BULK EP can queue any amount of data; the transfer is
++ *	  packetized.
++ *	- Zero length Packets are specified with the request 'zero'
++ *	  flag.
++ */
++static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req,
++		    gfp_t gfp_flags)
++{
++	dwc_otg_pcd_t *pcd;
++	struct dwc_otg_pcd_ep *ep = NULL;
++	int retval = 0, is_isoc_ep = 0;
++	dma_addr_t dma_addr = DWC_DMA_ADDR_INVALID;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n",
++		    __func__, usb_ep, usb_req, gfp_flags);
++
++	if (!usb_req || !usb_req->complete || !usb_req->buf) {
++		DWC_WARN("bad params\n");
++		return -EINVAL;
++	}
++
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++		return -EINVAL;
++	}
++
++	pcd = gadget_wrapper->pcd;
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n",
++			    gadget_wrapper->gadget.speed);
++		DWC_WARN("bogus device state\n");
++		return -ESHUTDOWN;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
++		    usb_ep->name, usb_req, usb_req->length, usb_req->buf);
++
++	usb_req->status = -EINPROGRESS;
++	usb_req->actual = 0;
++
++	ep = ep_from_handle(pcd, usb_ep);
++	if (ep == NULL)
++		is_isoc_ep = 0;
++	else
++		is_isoc_ep = (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ? 1 : 0;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++	dma_addr = usb_req->dma;
++#else
++	if (GET_CORE_IF(pcd)->dma_enable) {
++                dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev;
++                struct device *dev = NULL;
++                
++                if (otg_dev != NULL)
++                        dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep);
++                
++		if (usb_req->length != 0 &&
++                    usb_req->dma == DWC_DMA_ADDR_INVALID) {
++                        dma_addr = dma_map_single(dev, usb_req->buf,
++                                                  usb_req->length, 
++                                                  ep->dwc_ep.is_in ?
++                                                        DMA_TO_DEVICE:
++                                                        DMA_FROM_DEVICE);
++		}
++	}
++#endif
++
++#ifdef DWC_UTE_PER_IO
++	if (is_isoc_ep == 1) {
++		retval = dwc_otg_pcd_xiso_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr,
++			usb_req->length, usb_req->zero, usb_req,
++			gfp_flags == GFP_ATOMIC ? 1 : 0, &usb_req->ext_req);
++		if (retval)
++			return -EINVAL;
++
++		return 0;
++	}
++#endif
++	retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr,
++				      usb_req->length, usb_req->zero, usb_req,
++				      gfp_flags == GFP_ATOMIC ? 1 : 0);
++	if (retval) {
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/**
++ * This function cancels an I/O request from an EP.
++ */
++static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req)
++{
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req);
++
++	if (!usb_ep || !usb_req) {
++		DWC_WARN("bad argument\n");
++		return -EINVAL;
++	}
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("bogus device state\n");
++		return -ESHUTDOWN;
++	}
++	if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) {
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/**
++ * usb_ep_set_halt stalls an endpoint.
++ *
++ * usb_ep_clear_halt clears an endpoint halt and resets its data
++ * toggle.
++ *
++ * Both of these functions are implemented with the same underlying
++ * function. The behavior depends on the value argument.
++ *
++ * @param[in] usb_ep the Endpoint to halt or clear halt.
++ * @param[in] value
++ *	- 0 means clear_halt.
++ *	- 1 means set_halt,
++ *	- 2 means clear stall lock flag.
++ *	- 3 means set  stall lock flag.
++ */
++static int ep_halt(struct usb_ep *usb_ep, int value)
++{
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value);
++
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++		return -EINVAL;
++	}
++
++	retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value);
++	if (retval == -DWC_E_AGAIN) {
++		return -EAGAIN;
++	} else if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++
++//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
++#if 0
++/**
++ * ep_wedge: sets the halt feature and ignores clear requests
++ *
++ * @usb_ep: the endpoint being wedged
++ *
++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
++ * requests. If the gadget driver clears the halt status, it will
++ * automatically unwedge the endpoint.
++ *
++ * Returns zero on success, else negative errno. *
++ * Check usb_ep_set_wedge() at "usb_gadget.h" for details
++ */
++static int ep_wedge(struct usb_ep *usb_ep)
++{
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name);
++
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++		return -EINVAL;
++	}
++
++	retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep);
++	if (retval == -DWC_E_AGAIN) {
++		retval = -EAGAIN;
++	} else if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++#endif
++
++#ifdef DWC_EN_ISOC
++/**
++ * This function is used to submit an ISOC Transfer Request to an EP.
++ *
++ *	- Every time a sync period completes the request's completion callback
++ *	  is called to provide data to the gadget driver.
++ *	- Once submitted the request cannot be modified.
++ *	- Each request is turned into periodic data packets untill ISO
++ *	  Transfer is stopped..
++ */
++static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
++			gfp_t gfp_flags)
++{
++	int retval = 0;
++
++	if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
++		DWC_WARN("bad params\n");
++		return -EINVAL;
++	}
++
++	if (!usb_ep) {
++		DWC_PRINTF("bad params\n");
++		return -EINVAL;
++	}
++
++	req->status = -EINPROGRESS;
++
++	retval =
++	    dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0,
++				     req->buf1, req->dma0, req->dma1,
++				     req->sync_frame, req->data_pattern_frame,
++				     req->data_per_frame,
++				     req->
++				     flags & USB_REQ_ISO_ASAP ? -1 :
++				     req->start_frame, req->buf_proc_intrvl,
++				     req, gfp_flags == GFP_ATOMIC ? 1 : 0);
++
++	if (retval) {
++		return -EINVAL;
++	}
++
++	return retval;
++}
++
++/**
++ * This function stops ISO EP Periodic Data Transfer.
++ */
++static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
++{
++	int retval = 0;
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++	}
++
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n",
++			    gadget_wrapper->gadget.speed);
++		DWC_WARN("bogus device state\n");
++	}
++
++	dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req);
++	if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++
++static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep,
++						 int packets, gfp_t gfp_flags)
++{
++	struct usb_iso_request *pReq = NULL;
++	uint32_t req_size;
++
++	req_size = sizeof(struct usb_iso_request);
++	req_size +=
++	    (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
++
++	pReq = kmalloc(req_size, gfp_flags);
++	if (!pReq) {
++		DWC_WARN("Can't allocate Iso Request\n");
++		return 0;
++	}
++	pReq->iso_packet_desc0 = (void *)(pReq + 1);
++
++	pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
++
++	return pReq;
++}
++
++static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
++{
++	kfree(req);
++}
++
++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = {
++	.ep_ops = {
++		   .enable = ep_enable,
++		   .disable = ep_disable,
++
++		   .alloc_request = dwc_otg_pcd_alloc_request,
++		   .free_request = dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		   .alloc_buffer = dwc_otg_pcd_alloc_buffer,
++		   .free_buffer = dwc_otg_pcd_free_buffer,
++#endif
++
++		   .queue = ep_queue,
++		   .dequeue = ep_dequeue,
++
++		   .set_halt = ep_halt,
++		   .fifo_status = 0,
++		   .fifo_flush = 0,
++		   },
++	.iso_ep_start = iso_ep_start,
++	.iso_ep_stop = iso_ep_stop,
++	.alloc_iso_request = alloc_iso_request,
++	.free_iso_request = free_iso_request,
++};
++
++#else
++
++	int (*enable) (struct usb_ep *ep,
++		const struct usb_endpoint_descriptor *desc);
++	int (*disable) (struct usb_ep *ep);
++
++	struct usb_request *(*alloc_request) (struct usb_ep *ep,
++		gfp_t gfp_flags);
++	void (*free_request) (struct usb_ep *ep, struct usb_request *req);
++
++	int (*queue) (struct usb_ep *ep, struct usb_request *req,
++		gfp_t gfp_flags);
++	int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
++
++	int (*set_halt) (struct usb_ep *ep, int value);
++	int (*set_wedge) (struct usb_ep *ep);
++
++	int (*fifo_status) (struct usb_ep *ep);
++	void (*fifo_flush) (struct usb_ep *ep);
++static struct usb_ep_ops dwc_otg_pcd_ep_ops = {
++	.enable = ep_enable,
++	.disable = ep_disable,
++
++	.alloc_request = dwc_otg_pcd_alloc_request,
++	.free_request = dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++	.alloc_buffer = dwc_otg_pcd_alloc_buffer,
++	.free_buffer = dwc_otg_pcd_free_buffer,
++#else
++	/* .set_wedge = ep_wedge, */
++        .set_wedge = NULL, /* uses set_halt instead */
++#endif
++        
++	.queue = ep_queue,
++	.dequeue = ep_dequeue,
++
++	.set_halt = ep_halt,
++	.fifo_status = 0,
++	.fifo_flush = 0,
++
++};
++
++#endif /* _EN_ISOC_ */
++/*	Gadget Operations */
++/**
++ * The following gadget operations will be implemented in the DWC_otg
++ * PCD. Functions in the API that are not described below are not
++ * implemented.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
++ * wrapper function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper functions
++ * (except for ioctl, which doesn't have a wrapper function). Within
++ * each section, the corresponding DWC_otg PCD function name is
++ * specified.
++ *
++ */
++
++/**
++ *Gets the USB Frame number of the last SOF.
++ */
++static int get_frame_number(struct usb_gadget *gadget)
++{
++	struct gadget_wrapper *d;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	}
++
++	d = container_of(gadget, struct gadget_wrapper, gadget);
++	return dwc_otg_pcd_get_frame_number(d->pcd);
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++static int test_lpm_enabled(struct usb_gadget *gadget)
++{
++	struct gadget_wrapper *d;
++
++	d = container_of(gadget, struct gadget_wrapper, gadget);
++
++	return dwc_otg_pcd_is_lpm_enabled(d->pcd);
++}
++#endif
++
++/**
++ * Initiates Session Request Protocol (SRP) to wakeup the host if no
++ * session is in progress. If a session is already in progress, but
++ * the device is suspended, remote wakeup signaling is started.
++ *
++ */
++static int wakeup(struct usb_gadget *gadget)
++{
++	struct gadget_wrapper *d;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	} else {
++		d = container_of(gadget, struct gadget_wrapper, gadget);
++	}
++	dwc_otg_pcd_wakeup(d->pcd);
++	return 0;
++}
++
++static const struct usb_gadget_ops dwc_otg_pcd_ops = {
++	.get_frame = get_frame_number,
++	.wakeup = wakeup,
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	.lpm_support = test_lpm_enabled,
++#endif
++	// current versions must always be self-powered
++};
++
++static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes)
++{
++	int retval = -DWC_E_NOT_SUPPORTED;
++	if (gadget_wrapper->driver && gadget_wrapper->driver->setup) {
++		retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget,
++						       (struct usb_ctrlrequest
++							*)bytes);
++	}
++
++	if (retval == -ENOTSUPP) {
++		retval = -DWC_E_NOT_SUPPORTED;
++	} else if (retval < 0) {
++		retval = -DWC_E_INVALID;
++	}
++
++	return retval;
++}
++
++#ifdef DWC_EN_ISOC
++static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle,
++			  void *req_handle, int proc_buf_num)
++{
++	int i, packet_count;
++	struct usb_gadget_iso_packet_descriptor *iso_packet = 0;
++	struct usb_iso_request *iso_req = req_handle;
++
++	if (proc_buf_num) {
++		iso_packet = iso_req->iso_packet_desc1;
++	} else {
++		iso_packet = iso_req->iso_packet_desc0;
++	}
++	packet_count =
++	    dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle);
++	for (i = 0; i < packet_count; ++i) {
++		int status;
++		int actual;
++		int offset;
++		dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle,
++						  i, &status, &actual, &offset);
++		switch (status) {
++		case -DWC_E_NO_DATA:
++			status = -ENODATA;
++			break;
++		default:
++			if (status) {
++				DWC_PRINTF("unknown status in isoc packet\n");
++			}
++
++		}
++		iso_packet[i].status = status;
++		iso_packet[i].offset = offset;
++		iso_packet[i].actual_length = actual;
++	}
++
++	iso_req->status = 0;
++	iso_req->process_buffer(ep_handle, iso_req);
++
++	return 0;
++}
++#endif /* DWC_EN_ISOC */
++
++#ifdef DWC_UTE_PER_IO
++/**
++ * Copy the contents of the extended request to the Linux usb_request's
++ * extended part and call the gadget's completion.
++ *
++ * @param pcd			Pointer to the pcd structure
++ * @param ep_handle		Void pointer to the usb_ep structure
++ * @param req_handle	Void pointer to the usb_request structure
++ * @param status		Request status returned from the portable logic
++ * @param ereq_port		Void pointer to the extended request structure
++ *						created in the the portable part that contains the
++ *						results of the processed iso packets.
++ */
++static int _xisoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle,
++			   void *req_handle, int32_t status, void *ereq_port)
++{
++	struct dwc_ute_iso_req_ext *ereqorg = NULL;
++	struct dwc_iso_xreq_port *ereqport = NULL;
++	struct dwc_ute_iso_packet_descriptor *desc_org = NULL;
++	int i;
++	struct usb_request *req;
++	//struct dwc_ute_iso_packet_descriptor *
++	//int status = 0;
++
++	req = (struct usb_request *)req_handle;
++	ereqorg = &req->ext_req;
++	ereqport = (struct dwc_iso_xreq_port *)ereq_port;
++	desc_org = ereqorg->per_io_frame_descs;
++
++	if (req && req->complete) {
++		/* Copy the request data from the portable logic to our request */
++		for (i = 0; i < ereqport->pio_pkt_count; i++) {
++			desc_org[i].actual_length =
++			    ereqport->per_io_frame_descs[i].actual_length;
++			desc_org[i].status =
++			    ereqport->per_io_frame_descs[i].status;
++		}
++
++		switch (status) {
++		case -DWC_E_SHUTDOWN:
++			req->status = -ESHUTDOWN;
++			break;
++		case -DWC_E_RESTART:
++			req->status = -ECONNRESET;
++			break;
++		case -DWC_E_INVALID:
++			req->status = -EINVAL;
++			break;
++		case -DWC_E_TIMEOUT:
++			req->status = -ETIMEDOUT;
++			break;
++		default:
++			req->status = status;
++		}
++
++		/* And call the gadget's completion */
++		req->complete(ep_handle, req);
++	}
++
++	return 0;
++}
++#endif /* DWC_UTE_PER_IO */
++
++static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle,
++		     void *req_handle, int32_t status, uint32_t actual)
++{
++	struct usb_request *req = (struct usb_request *)req_handle;
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)
++	struct dwc_otg_pcd_ep *ep = NULL;
++#endif
++
++	if (req && req->complete) {
++		switch (status) {
++		case -DWC_E_SHUTDOWN:
++			req->status = -ESHUTDOWN;
++			break;
++		case -DWC_E_RESTART:
++			req->status = -ECONNRESET;
++			break;
++		case -DWC_E_INVALID:
++			req->status = -EINVAL;
++			break;
++		case -DWC_E_TIMEOUT:
++			req->status = -ETIMEDOUT;
++			break;
++		default:
++			req->status = status;
++
++		}
++
++		req->actual = actual;
++		DWC_SPINUNLOCK(pcd->lock);
++		req->complete(ep_handle, req);
++		DWC_SPINLOCK(pcd->lock);
++	}
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)
++	ep = ep_from_handle(pcd, ep_handle);
++	if (GET_CORE_IF(pcd)->dma_enable) {
++                if (req->length != 0) {
++                        dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev;
++                        struct device *dev = NULL;
++
++                        if (otg_dev != NULL)
++                                  dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep);
++
++			dma_unmap_single(dev, req->dma, req->length,
++                                         ep->dwc_ep.is_in ?
++                                                DMA_TO_DEVICE: DMA_FROM_DEVICE);
++                }
++	}
++#endif
++
++	return 0;
++}
++
++static int _connect(dwc_otg_pcd_t * pcd, int speed)
++{
++	gadget_wrapper->gadget.speed = speed;
++	return 0;
++}
++
++static int _disconnect(dwc_otg_pcd_t * pcd)
++{
++	if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) {
++		gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget);
++	}
++	return 0;
++}
++
++static int _resume(dwc_otg_pcd_t * pcd)
++{
++	if (gadget_wrapper->driver && gadget_wrapper->driver->resume) {
++		gadget_wrapper->driver->resume(&gadget_wrapper->gadget);
++	}
++
++	return 0;
++}
++
++static int _suspend(dwc_otg_pcd_t * pcd)
++{
++	if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) {
++		gadget_wrapper->driver->suspend(&gadget_wrapper->gadget);
++	}
++	return 0;
++}
++
++/**
++ * This function updates the otg values in the gadget structure.
++ */
++static int _hnp_changed(dwc_otg_pcd_t * pcd)
++{
++
++	if (!gadget_wrapper->gadget.is_otg)
++		return 0;
++
++	gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd);
++	gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd);
++	gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd);
++	return 0;
++}
++
++static int _reset(dwc_otg_pcd_t * pcd)
++{
++	return 0;
++}
++
++#ifdef DWC_UTE_CFI
++static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req)
++{
++	int retval = -DWC_E_INVALID;
++	if (gadget_wrapper->driver->cfi_feature_setup) {
++		retval =
++		    gadget_wrapper->driver->
++		    cfi_feature_setup(&gadget_wrapper->gadget,
++				      (struct cfi_usb_ctrlrequest *)cfi_req);
++	}
++
++	return retval;
++}
++#endif
++
++static const struct dwc_otg_pcd_function_ops fops = {
++	.complete = _complete,
++#ifdef DWC_EN_ISOC
++	.isoc_complete = _isoc_complete,
++#endif
++	.setup = _setup,
++	.disconnect = _disconnect,
++	.connect = _connect,
++	.resume = _resume,
++	.suspend = _suspend,
++	.hnp_changed = _hnp_changed,
++	.reset = _reset,
++#ifdef DWC_UTE_CFI
++	.cfi_setup = _cfi_setup,
++#endif
++#ifdef DWC_UTE_PER_IO
++	.xisoc_complete = _xisoc_complete,
++#endif
++};
++
++/**
++ * This function is the top level PCD interrupt handler.
++ */
++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev)
++{
++	dwc_otg_pcd_t *pcd = dev;
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_pcd_handle_intr(pcd);
++	if (retval != 0) {
++		S3C2410X_CLEAR_EINTPEND();
++	}
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * This function initialized the usb_ep structures to there default
++ * state.
++ *
++ * @param d Pointer on gadget_wrapper.
++ */
++void gadget_add_eps(struct gadget_wrapper *d)
++{
++	static const char *names[] = {
++
++		"ep0",
++		"ep1in",
++		"ep2in",
++		"ep3in",
++		"ep4in",
++		"ep5in",
++		"ep6in",
++		"ep7in",
++		"ep8in",
++		"ep9in",
++		"ep10in",
++		"ep11in",
++		"ep12in",
++		"ep13in",
++		"ep14in",
++		"ep15in",
++		"ep1out",
++		"ep2out",
++		"ep3out",
++		"ep4out",
++		"ep5out",
++		"ep6out",
++		"ep7out",
++		"ep8out",
++		"ep9out",
++		"ep10out",
++		"ep11out",
++		"ep12out",
++		"ep13out",
++		"ep14out",
++		"ep15out"
++	};
++
++	int i;
++	struct usb_ep *ep;
++	int8_t dev_endpoints;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__);
++
++	INIT_LIST_HEAD(&d->gadget.ep_list);
++	d->gadget.ep0 = &d->ep0;
++	d->gadget.speed = USB_SPEED_UNKNOWN;
++
++	INIT_LIST_HEAD(&d->gadget.ep0->ep_list);
++
++	/**
++	 * Initialize the EP0 structure.
++	 */
++	ep = &d->ep0;
++
++	/* Init the usb_ep structure. */
++	ep->name = names[0];
++	ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
++
++	/**
++	 * @todo NGS: What should the max packet size be set to
++	 * here?  Before EP type is set?
++	 */
++	ep->maxpacket = MAX_PACKET_SIZE;
++	dwc_otg_pcd_ep_enable(d->pcd, NULL, ep);
++
++	list_add_tail(&ep->ep_list, &d->gadget.ep_list);
++
++	/**
++	 * Initialize the EP structures.
++	 */
++	dev_endpoints = d->pcd->core_if->dev_if->num_in_eps;
++
++	for (i = 0; i < dev_endpoints; i++) {
++		ep = &d->in_ep[i];
++
++		/* Init the usb_ep structure. */
++		ep->name = names[d->pcd->in_ep[i].dwc_ep.num];
++		ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
++
++		/**
++		 * @todo NGS: What should the max packet size be set to
++		 * here?  Before EP type is set?
++		 */
++		ep->maxpacket = MAX_PACKET_SIZE;
++		list_add_tail(&ep->ep_list, &d->gadget.ep_list);
++	}
++
++	dev_endpoints = d->pcd->core_if->dev_if->num_out_eps;
++
++	for (i = 0; i < dev_endpoints; i++) {
++		ep = &d->out_ep[i];
++
++		/* Init the usb_ep structure. */
++		ep->name = names[15 + d->pcd->out_ep[i].dwc_ep.num];
++		ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
++
++		/**
++		 * @todo NGS: What should the max packet size be set to
++		 * here?  Before EP type is set?
++		 */
++		ep->maxpacket = MAX_PACKET_SIZE;
++
++		list_add_tail(&ep->ep_list, &d->gadget.ep_list);
++	}
++
++	/* remove ep0 from the list.  There is a ep0 pointer. */
++	list_del_init(&d->ep0.ep_list);
++
++	d->ep0.maxpacket = MAX_EP0_SIZE;
++}
++
++/**
++ * This function releases the Gadget device.
++ * required by device_unregister().
++ *
++ * @todo Should this do something?	Should it free the PCD?
++ */
++static void dwc_otg_pcd_gadget_release(struct device *dev)
++{
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev);
++}
++
++static struct gadget_wrapper *alloc_wrapper(dwc_bus_dev_t *_dev)
++{
++	static char pcd_name[] = "dwc_otg_pcd";
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	struct gadget_wrapper *d;
++	int retval;
++
++	d = DWC_ALLOC(sizeof(*d));
++	if (d == NULL) {
++		return NULL;
++	}
++
++	memset(d, 0, sizeof(*d));
++
++	d->gadget.name = pcd_name;
++	d->pcd = otg_dev->pcd;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++	strcpy(d->gadget.dev.bus_id, "gadget");
++#else
++	dev_set_name(&d->gadget.dev, "%s", "gadget");
++#endif
++
++	d->gadget.dev.parent = &_dev->dev;
++	d->gadget.dev.release = dwc_otg_pcd_gadget_release;
++	d->gadget.ops = &dwc_otg_pcd_ops;
++	d->gadget.max_speed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd) ? USB_SPEED_HIGH:USB_SPEED_FULL;
++	d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd);
++
++	d->driver = 0;
++	/* Register the gadget device */
++	retval = device_register(&d->gadget.dev);
++	if (retval != 0) {
++		DWC_ERROR("device_register failed\n");
++		DWC_FREE(d);
++		return NULL;
++	}
++
++	return d;
++}
++
++static void free_wrapper(struct gadget_wrapper *d)
++{
++	if (d->driver) {
++		/* should have been done already by driver model core */
++		DWC_WARN("driver '%s' is still registered\n",
++			 d->driver->driver.name);
++		usb_gadget_unregister_driver(d->driver);
++	}
++
++	device_unregister(&d->gadget.dev);
++	DWC_FREE(d);
++}
++
++/**
++ * This function initialized the PCD portion of the driver.
++ *
++ */
++int pcd_init(dwc_bus_dev_t *_dev)
++{
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev);
++
++	otg_dev->pcd = dwc_otg_pcd_init(otg_dev->core_if);
++
++	if (!otg_dev->pcd) {
++		DWC_ERROR("dwc_otg_pcd_init failed\n");
++		return -ENOMEM;
++	}
++
++	otg_dev->pcd->otg_dev = otg_dev;
++	gadget_wrapper = alloc_wrapper(_dev);
++
++	/*
++	 * Initialize EP structures
++	 */
++	gadget_add_eps(gadget_wrapper);
++	/*
++	 * Setup interupt handler
++	 */
++#ifdef PLATFORM_INTERFACE
++	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
++                    platform_get_irq(_dev, 0));
++	retval = request_irq(platform_get_irq(_dev, 0), dwc_otg_pcd_irq,
++			     IRQF_SHARED, gadget_wrapper->gadget.name,
++			     otg_dev->pcd);
++	if (retval != 0) {
++		DWC_ERROR("request of irq%d failed\n",
++                          platform_get_irq(_dev, 0));
++		free_wrapper(gadget_wrapper);
++		return -EBUSY;
++	}
++#else
++	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
++                    _dev->irq);
++	retval = request_irq(_dev->irq, dwc_otg_pcd_irq,
++			     IRQF_SHARED | IRQF_DISABLED,
++			     gadget_wrapper->gadget.name, otg_dev->pcd);
++	if (retval != 0) {
++		DWC_ERROR("request of irq%d failed\n", _dev->irq);
++		free_wrapper(gadget_wrapper);
++		return -EBUSY;
++	}
++#endif
++
++	dwc_otg_pcd_start(gadget_wrapper->pcd, &fops);
++
++	return retval;
++}
++
++/**
++ * Cleanup the PCD.
++ */
++void pcd_remove(dwc_bus_dev_t *_dev)
++{
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	dwc_otg_pcd_t *pcd = otg_dev->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev);
++
++	/*
++	 * Free the IRQ
++	 */
++#ifdef PLATFORM_INTERFACE
++	free_irq(platform_get_irq(_dev, 0), pcd);
++#else
++	free_irq(_dev->irq, pcd);
++#endif
++	dwc_otg_pcd_remove(otg_dev->pcd);
++	free_wrapper(gadget_wrapper);
++	otg_dev->pcd = 0;
++}
++
++/**
++ * This function registers a gadget driver with the PCD.
++ *
++ * When a driver is successfully registered, it will receive control
++ * requests including set_configuration(), which enables non-control
++ * requests.  then usb traffic follows until a disconnect is reported.
++ * then a host may connect again, or the driver might get unbound.
++ *
++ * @param driver The driver being registered
++ * @param bind The bind function of gadget driver
++ */
++
++int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n",
++		    driver->driver.name);
++
++	if (!driver || driver->max_speed == USB_SPEED_UNKNOWN ||
++	    !driver->bind ||
++	    !driver->unbind || !driver->disconnect || !driver->setup) {
++		DWC_DEBUGPL(DBG_PCDV, "EINVAL\n");
++		return -EINVAL;
++	}
++	if (gadget_wrapper == 0) {
++		DWC_DEBUGPL(DBG_PCDV, "ENODEV\n");
++		return -ENODEV;
++	}
++	if (gadget_wrapper->driver != 0) {
++		DWC_DEBUGPL(DBG_PCDV, "EBUSY (%p)\n", gadget_wrapper->driver);
++		return -EBUSY;
++	}
++
++	/* hook up the driver */
++	gadget_wrapper->driver = driver;
++	gadget_wrapper->gadget.dev.driver = &driver->driver;
++
++	DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name);
++	retval = driver->bind(&gadget_wrapper->gadget, gadget_wrapper->driver);
++	if (retval) {
++		DWC_ERROR("bind to driver %s --> error %d\n",
++			  driver->driver.name, retval);
++		gadget_wrapper->driver = 0;
++		gadget_wrapper->gadget.dev.driver = 0;
++		return retval;
++	}
++	DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n",
++		    driver->driver.name);
++	return 0;
++}
++EXPORT_SYMBOL(usb_gadget_probe_driver);
++
++/**
++ * This function unregisters a gadget driver
++ *
++ * @param driver The driver being unregistered
++ */
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	//DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver);
++
++	if (gadget_wrapper == 0) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,
++			    -ENODEV);
++		return -ENODEV;
++	}
++	if (driver == 0 || driver != gadget_wrapper->driver) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,
++			    -EINVAL);
++		return -EINVAL;
++	}
++
++	driver->unbind(&gadget_wrapper->gadget);
++	gadget_wrapper->driver = 0;
++
++	DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n", driver->driver.name);
++	return 0;
++}
++
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++#endif /* DWC_HOST_ONLY */
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_regs.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_regs.h
+--- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_regs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_regs.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,2550 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
++ * $Revision: #98 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_REGS_H__
++#define __DWC_OTG_REGS_H__
++
++#include "dwc_otg_core_if.h"
++
++/**
++ * @file
++ *
++ * This file contains the data structures for accessing the DWC_otg core registers.
++ *
++ * The application interfaces with the HS OTG core by reading from and
++ * writing to the Control and Status Register (CSR) space through the
++ * AHB Slave interface. These registers are 32 bits wide, and the
++ * addresses are 32-bit-block aligned.
++ * CSRs are classified as follows:
++ * - Core Global Registers
++ * - Device Mode Registers
++ * - Device Global Registers
++ * - Device Endpoint Specific Registers
++ * - Host Mode Registers
++ * - Host Global Registers
++ * - Host Port CSRs
++ * - Host Channel Specific Registers
++ *
++ * Only the Core Global registers can be accessed in both Device and
++ * Host modes. When the HS OTG core is operating in one mode, either
++ * Device or Host, the application must not access registers from the
++ * other mode. When the core switches from one mode to another, the
++ * registers in the new mode of operation must be reprogrammed as they
++ * would be after a power-on reset.
++ */
++
++/****************************************************************************/
++/** DWC_otg Core registers . 
++ * The dwc_otg_core_global_regs structure defines the size
++ * and relative field offsets for the Core Global registers.
++ */
++typedef struct dwc_otg_core_global_regs {
++	/** OTG Control and Status Register.  <i>Offset: 000h</i> */
++	volatile uint32_t gotgctl;
++	/** OTG Interrupt Register.	 <i>Offset: 004h</i> */
++	volatile uint32_t gotgint;
++	/**Core AHB Configuration Register.	 <i>Offset: 008h</i> */
++	volatile uint32_t gahbcfg;
++
++#define DWC_GLBINTRMASK		0x0001
++#define DWC_DMAENABLE		0x0020
++#define DWC_NPTXEMPTYLVL_EMPTY	0x0080
++#define DWC_NPTXEMPTYLVL_HALFEMPTY	0x0000
++#define DWC_PTXEMPTYLVL_EMPTY	0x0100
++#define DWC_PTXEMPTYLVL_HALFEMPTY	0x0000
++
++	/**Core USB Configuration Register.	 <i>Offset: 00Ch</i> */
++	volatile uint32_t gusbcfg;
++	/**Core Reset Register.	 <i>Offset: 010h</i> */
++	volatile uint32_t grstctl;
++	/**Core Interrupt Register.	 <i>Offset: 014h</i> */
++	volatile uint32_t gintsts;
++	/**Core Interrupt Mask Register.  <i>Offset: 018h</i> */
++	volatile uint32_t gintmsk;
++	/**Receive Status Queue Read Register (Read Only).	<i>Offset: 01Ch</i> */
++	volatile uint32_t grxstsr;
++	/**Receive Status Queue Read & POP Register (Read Only).  <i>Offset: 020h</i>*/
++	volatile uint32_t grxstsp;
++	/**Receive FIFO Size Register.	<i>Offset: 024h</i> */
++	volatile uint32_t grxfsiz;
++	/**Non Periodic Transmit FIFO Size Register.  <i>Offset: 028h</i> */
++	volatile uint32_t gnptxfsiz;
++	/**Non Periodic Transmit FIFO/Queue Status Register (Read
++	 * Only). <i>Offset: 02Ch</i> */
++	volatile uint32_t gnptxsts;
++	/**I2C Access Register.	 <i>Offset: 030h</i> */
++	volatile uint32_t gi2cctl;
++	/**PHY Vendor Control Register.	 <i>Offset: 034h</i> */
++	volatile uint32_t gpvndctl;
++	/**General Purpose Input/Output Register.  <i>Offset: 038h</i> */
++	volatile uint32_t ggpio;
++	/**User ID Register.  <i>Offset: 03Ch</i> */
++	volatile uint32_t guid;
++	/**Synopsys ID Register (Read Only).  <i>Offset: 040h</i> */
++	volatile uint32_t gsnpsid;
++	/**User HW Config1 Register (Read Only).  <i>Offset: 044h</i> */
++	volatile uint32_t ghwcfg1;
++	/**User HW Config2 Register (Read Only).  <i>Offset: 048h</i> */
++	volatile uint32_t ghwcfg2;
++#define DWC_SLAVE_ONLY_ARCH 0
++#define DWC_EXT_DMA_ARCH 1
++#define DWC_INT_DMA_ARCH 2
++
++#define DWC_MODE_HNP_SRP_CAPABLE	0
++#define DWC_MODE_SRP_ONLY_CAPABLE	1
++#define DWC_MODE_NO_HNP_SRP_CAPABLE		2
++#define DWC_MODE_SRP_CAPABLE_DEVICE		3
++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE	4
++#define DWC_MODE_SRP_CAPABLE_HOST	5
++#define DWC_MODE_NO_SRP_CAPABLE_HOST	6
++
++	/**User HW Config3 Register (Read Only).  <i>Offset: 04Ch</i> */
++	volatile uint32_t ghwcfg3;
++	/**User HW Config4 Register (Read Only).  <i>Offset: 050h</i>*/
++	volatile uint32_t ghwcfg4;
++	/** Core LPM Configuration register <i>Offset: 054h</i>*/
++	volatile uint32_t glpmcfg;
++	/** Global PowerDn Register <i>Offset: 058h</i> */
++	volatile uint32_t gpwrdn;
++	/** Global DFIFO SW Config Register  <i>Offset: 05Ch</i> */
++	volatile uint32_t gdfifocfg;
++	/** ADP Control Register  <i>Offset: 060h</i> */
++	volatile uint32_t adpctl;
++	/** Reserved  <i>Offset: 064h-0FFh</i> */
++	volatile uint32_t reserved39[39];
++	/** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
++	volatile uint32_t hptxfsiz;
++	/** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
++		otherwise Device Transmit FIFO#n Register.
++	 * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
++	volatile uint32_t dtxfsiz[15];
++} dwc_otg_core_global_regs_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Control
++ * and Status Register (GOTGCTL).  Set the bits using the bit
++ * fields then write the <i>d32</i> value to the register.
++ */
++typedef union gotgctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned sesreqscs:1;
++		unsigned sesreq:1;
++		unsigned vbvalidoven:1;
++		unsigned vbvalidovval:1;
++		unsigned avalidoven:1;
++		unsigned avalidovval:1;
++		unsigned bvalidoven:1;
++		unsigned bvalidovval:1;
++		unsigned hstnegscs:1;
++		unsigned hnpreq:1;
++		unsigned hstsethnpen:1;
++		unsigned devhnpen:1;
++		unsigned reserved12_15:4;
++		unsigned conidsts:1;
++		unsigned dbnctime:1;
++		unsigned asesvld:1;
++		unsigned bsesvld:1;
++		unsigned otgver:1;
++		unsigned reserved1:1;
++		unsigned multvalidbc:5;
++		unsigned chirpen:1;
++		unsigned reserved28_31:4;
++	} b;
++} gotgctl_data_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Interrupt Register
++ * (GOTGINT).  Set/clear the bits using the bit fields then write the <i>d32</i>
++ * value to the register.
++ */
++typedef union gotgint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Current Mode */
++		unsigned reserved0_1:2;
++
++		/** Session End Detected */
++		unsigned sesenddet:1;
++
++		unsigned reserved3_7:5;
++
++		/** Session Request Success Status Change */
++		unsigned sesreqsucstschng:1;
++		/** Host Negotiation Success Status Change */
++		unsigned hstnegsucstschng:1;
++
++		unsigned reserved10_16:7;
++
++		/** Host Negotiation Detected */
++		unsigned hstnegdet:1;
++		/** A-Device Timeout Change */
++		unsigned adevtoutchng:1;
++		/** Debounce Done */
++		unsigned debdone:1;
++		/** Multi-Valued input changed */
++		unsigned mvic:1;
++
++		unsigned reserved31_21:11;
++
++	} b;
++} gotgint_data_t;
++
++/**
++ * This union represents the bit fields of the Core AHB Configuration
++ * Register (GAHBCFG). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gahbcfg_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned glblintrmsk:1;
++#define DWC_GAHBCFG_GLBINT_ENABLE		1
++
++		unsigned hburstlen:4;
++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE	0
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR		1
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4		3
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8		5
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16	7
++
++		unsigned dmaenable:1;
++#define DWC_GAHBCFG_DMAENABLE			1
++		unsigned reserved:1;
++		unsigned nptxfemplvl_txfemplvl:1;
++		unsigned ptxfemplvl:1;
++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY		1
++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY	0
++		unsigned reserved9_20:12;
++		unsigned remmemsupp:1;
++		unsigned notialldmawrit:1;
++		unsigned ahbsingle:1;
++		unsigned reserved24_31:8;
++	} b;
++} gahbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core USB Configuration
++ * Register (GUSBCFG). Set the bits using the bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union gusbcfg_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned toutcal:3;
++		unsigned phyif:1;
++		unsigned ulpi_utmi_sel:1;
++		unsigned fsintf:1;
++		unsigned physel:1;
++		unsigned ddrsel:1;
++		unsigned srpcap:1;
++		unsigned hnpcap:1;
++		unsigned usbtrdtim:4;
++		unsigned reserved1:1;
++		unsigned phylpwrclksel:1;
++		unsigned otgutmifssel:1;
++		unsigned ulpi_fsls:1;
++		unsigned ulpi_auto_res:1;
++		unsigned ulpi_clk_sus_m:1;
++		unsigned ulpi_ext_vbus_drv:1;
++		unsigned ulpi_int_vbus_indicator:1;
++		unsigned term_sel_dl_pulse:1;
++		unsigned indicator_complement:1;
++		unsigned indicator_pass_through:1;
++		unsigned ulpi_int_prot_dis:1;
++		unsigned ic_usb_cap:1;
++		unsigned ic_traffic_pull_remove:1;
++		unsigned tx_end_delay:1;
++		unsigned force_host_mode:1;
++		unsigned force_dev_mode:1;
++		unsigned reserved31:1;
++	} b;
++} gusbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core Reset Register
++ * (GRSTCTL).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union grstctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Core Soft Reset (CSftRst) (Device and Host)
++		 *
++		 * The application can flush the control logic in the
++		 * entire core using this bit. This bit resets the
++		 * pipelines in the AHB Clock domain as well as the
++		 * PHY Clock domain.
++		 *
++		 * The state machines are reset to an IDLE state, the
++		 * control bits in the CSRs are cleared, all the
++		 * transmit FIFOs and the receive FIFO are flushed.
++		 *
++		 * The status mask bits that control the generation of
++		 * the interrupt, are cleared, to clear the
++		 * interrupt. The interrupt status bits are not
++		 * cleared, so the application can get the status of
++		 * any events that occurred in the core after it has
++		 * set this bit.
++		 *
++		 * Any transactions on the AHB are terminated as soon
++		 * as possible following the protocol. Any
++		 * transactions on the USB are terminated immediately.
++		 *
++		 * The configuration settings in the CSRs are
++		 * unchanged, so the software doesn't have to
++		 * reprogram these registers (Device
++		 * Configuration/Host Configuration/Core System
++		 * Configuration/Core PHY Configuration).
++		 *
++		 * The application can write to this bit, any time it
++		 * wants to reset the core. This is a self clearing
++		 * bit and the core clears this bit after all the
++		 * necessary logic is reset in the core, which may
++		 * take several clocks, depending on the current state
++		 * of the core.
++		 */
++		unsigned csftrst:1;
++		/** Hclk Soft Reset
++		 *
++		 * The application uses this bit to reset the control logic in
++		 * the AHB clock domain. Only AHB clock domain pipelines are
++		 * reset.
++		 */
++		unsigned hsftrst:1;
++		/** Host Frame Counter Reset (Host Only)<br>
++		 *
++		 * The application can reset the (micro)frame number
++		 * counter inside the core, using this bit. When the
++		 * (micro)frame counter is reset, the subsequent SOF
++		 * sent out by the core, will have a (micro)frame
++		 * number of 0.
++		 */
++		unsigned hstfrm:1;
++		/** In Token Sequence Learning Queue Flush
++		 * (INTknQFlsh) (Device Only)
++		 */
++		unsigned intknqflsh:1;
++		/** RxFIFO Flush (RxFFlsh) (Device and Host)
++		 *
++		 * The application can flush the entire Receive FIFO
++		 * using this bit. The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction. The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is reading from the RxFIFO nor the MAC
++		 * is writing the data in to the FIFO. The
++		 * application should wait until the bit is cleared
++		 * before performing any other operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned rxfflsh:1;
++		/** TxFIFO Flush (TxFFlsh) (Device and Host). 
++		 *
++		 * This bit is used to selectively flush a single or
++		 * all transmit FIFOs. The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction. The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is writing into the TxFIFO nor the MAC
++		 * is reading the data out of the FIFO. The
++		 * application should wait until the core clears this
++		 * bit, before performing any operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned txfflsh:1;
++
++		/** TxFIFO Number (TxFNum) (Device and Host).
++		 *
++		 * This is the FIFO number which needs to be flushed,
++		 * using the TxFIFO Flush bit. This field should not
++		 * be changed until the TxFIFO Flush bit is cleared by
++		 * the core.
++		 *	 - 0x0 : Non Periodic TxFIFO Flush
++		 *	 - 0x1 : Periodic TxFIFO #1 Flush in device mode
++		 *	   or Periodic TxFIFO in host mode
++		 *	 - 0x2 : Periodic TxFIFO #2 Flush in device mode.
++		 *	 - ...
++		 *	 - 0xF : Periodic TxFIFO #15 Flush in device mode
++		 *	 - 0x10: Flush all the Transmit NonPeriodic and
++		 *	   Transmit Periodic FIFOs in the core
++		 */
++		unsigned txfnum:5;
++		/** Reserved */
++		unsigned reserved11_29:19;
++		/** DMA Request Signal.	 Indicated DMA request is in
++		 * probress. Used for debug purpose. */
++		unsigned dmareq:1;
++		/** AHB Master Idle.  Indicates the AHB Master State
++		 * Machine is in IDLE condition. */
++		unsigned ahbidle:1;
++	} b;
++} grstctl_t;
++
++/**
++ * This union represents the bit fields of the Core Interrupt Mask
++ * Register (GINTMSK). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gintmsk_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved0:1;
++		unsigned modemismatch:1;
++		unsigned otgintr:1;
++		unsigned sofintr:1;
++		unsigned rxstsqlvl:1;
++		unsigned nptxfempty:1;
++		unsigned ginnakeff:1;
++		unsigned goutnakeff:1;
++		unsigned ulpickint:1;
++		unsigned i2cintr:1;
++		unsigned erlysuspend:1;
++		unsigned usbsuspend:1;
++		unsigned usbreset:1;
++		unsigned enumdone:1;
++		unsigned isooutdrop:1;
++		unsigned eopframe:1;
++		unsigned restoredone:1;
++		unsigned epmismatch:1;
++		unsigned inepintr:1;
++		unsigned outepintr:1;
++		unsigned incomplisoin:1;
++		unsigned incomplisoout:1;
++		unsigned fetsusp:1;
++		unsigned resetdet:1;
++		unsigned portintr:1;
++		unsigned hcintr:1;
++		unsigned ptxfempty:1;
++		unsigned lpmtranrcvd:1;
++		unsigned conidstschng:1;
++		unsigned disconnect:1;
++		unsigned sessreqintr:1;
++		unsigned wkupintr:1;
++	} b;
++} gintmsk_data_t;
++/**
++ * This union represents the bit fields of the Core Interrupt Register
++ * (GINTSTS).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union gintsts_data {
++	/** raw register data */
++	uint32_t d32;
++#define DWC_SOF_INTR_MASK 0x0008
++	/** register bits */
++	struct {
++#define DWC_HOST_MODE 1
++		unsigned curmode:1;
++		unsigned modemismatch:1;
++		unsigned otgintr:1;
++		unsigned sofintr:1;
++		unsigned rxstsqlvl:1;
++		unsigned nptxfempty:1;
++		unsigned ginnakeff:1;
++		unsigned goutnakeff:1;
++		unsigned ulpickint:1;
++		unsigned i2cintr:1;
++		unsigned erlysuspend:1;
++		unsigned usbsuspend:1;
++		unsigned usbreset:1;
++		unsigned enumdone:1;
++		unsigned isooutdrop:1;
++		unsigned eopframe:1;
++		unsigned restoredone:1;
++		unsigned epmismatch:1;
++		unsigned inepint:1;
++		unsigned outepintr:1;
++		unsigned incomplisoin:1;
++		unsigned incomplisoout:1;
++		unsigned fetsusp:1;
++		unsigned resetdet:1;
++		unsigned portintr:1;
++		unsigned hcintr:1;
++		unsigned ptxfempty:1;
++		unsigned lpmtranrcvd:1;
++		unsigned conidstschng:1;
++		unsigned disconnect:1;
++		unsigned sessreqintr:1;
++		unsigned wkupintr:1;
++	} b;
++} gintsts_data_t;
++
++/**
++ * This union represents the bit fields in the Device Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union device_grxsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned epnum:4;
++		unsigned bcnt:11;
++		unsigned dpid:2;
++
++#define DWC_STS_DATA_UPDT		0x2	// OUT Data Packet
++#define DWC_STS_XFER_COMP		0x3	// OUT Data Transfer Complete
++
++#define DWC_DSTS_GOUT_NAK		0x1	// Global OUT NAK
++#define DWC_DSTS_SETUP_COMP		0x4	// Setup Phase Complete
++#define DWC_DSTS_SETUP_UPDT 0x6	// SETUP Packet
++		unsigned pktsts:4;
++		unsigned fn:4;
++		unsigned reserved25_31:7;
++	} b;
++} device_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union host_grxsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned chnum:4;
++		unsigned bcnt:11;
++		unsigned dpid:2;
++
++		unsigned pktsts:4;
++#define DWC_GRXSTS_PKTSTS_IN			  0x2
++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP	  0x3
++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
++#define DWC_GRXSTS_PKTSTS_CH_HALTED		  0x7
++
++		unsigned reserved21_31:11;
++	} b;
++} host_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element 
++ * then read out the bits using the <i>b</i>it elements.
++ */
++typedef union fifosize_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned startaddr:16;
++		unsigned depth:16;
++	} b;
++} fifosize_data_t;
++
++/**
++ * This union represents the bit fields in the Non-Periodic Transmit
++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union gnptxsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned nptxfspcavail:16;
++		unsigned nptxqspcavail:8;
++		/** Top of the Non-Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (Last entry for the selected
++		 *	  channel/EP)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - IN/OUT
++		 *	  - 2'b01 - Zero Length OUT
++		 *	  - 2'b10 - PING/Complete Split
++		 *	  - 2'b11 - Channel Halt
++		 *	- bits 30:27 - Channel/EP Number
++		 */
++		unsigned nptxqtop_terminate:1;
++		unsigned nptxqtop_token:2;
++		unsigned nptxqtop_chnep:4;
++		unsigned reserved:1;
++	} b;
++} gnptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Transmit
++ * FIFO Status Register (DTXFSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union dtxfsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned txfspcavail:16;
++		unsigned reserved:16;
++	} b;
++} dtxfsts_data_t;
++
++/**
++ * This union represents the bit fields in the I2C Control Register
++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gi2cctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned rwdata:8;
++		unsigned regaddr:8;
++		unsigned addr:7;
++		unsigned i2cen:1;
++		unsigned ack:1;
++		unsigned i2csuspctl:1;
++		unsigned i2cdevaddr:2;
++		unsigned i2cdatse0:1;
++		unsigned reserved:1;
++		unsigned rw:1;
++		unsigned bsydne:1;
++	} b;
++} gi2cctl_data_t;
++
++/**
++ * This union represents the bit fields in the PHY Vendor Control Register
++ * (GPVNDCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gpvndctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned regdata:8;
++		unsigned vctrl:8;
++		unsigned regaddr16_21:6;
++		unsigned regwr:1;
++		unsigned reserved23_24:2;
++		unsigned newregreq:1;
++		unsigned vstsbsy:1;
++		unsigned vstsdone:1;
++		unsigned reserved28_30:3;
++		unsigned disulpidrvr:1;
++	} b;
++} gpvndctl_data_t;
++
++/**
++ * This union represents the bit fields in the General Purpose 
++ * Input/Output Register (GGPIO).
++ * Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union ggpio_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned gpi:16;
++		unsigned gpo:16;
++	} b;
++} ggpio_data_t;
++
++/**
++ * This union represents the bit fields in the User ID Register
++ * (GUID). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union guid_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned rwdata:32;
++	} b;
++} guid_data_t;
++
++/**
++ * This union represents the bit fields in the Synopsys ID Register
++ * (GSNPSID). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gsnpsid_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned rwdata:32;
++	} b;
++} gsnpsid_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config1
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg1_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned ep_dir0:2;
++		unsigned ep_dir1:2;
++		unsigned ep_dir2:2;
++		unsigned ep_dir3:2;
++		unsigned ep_dir4:2;
++		unsigned ep_dir5:2;
++		unsigned ep_dir6:2;
++		unsigned ep_dir7:2;
++		unsigned ep_dir8:2;
++		unsigned ep_dir9:2;
++		unsigned ep_dir10:2;
++		unsigned ep_dir11:2;
++		unsigned ep_dir12:2;
++		unsigned ep_dir13:2;
++		unsigned ep_dir14:2;
++		unsigned ep_dir15:2;
++	} b;
++} hwcfg1_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config2
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg2_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/* GHWCFG2 */
++		unsigned op_mode:3;
++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++
++		unsigned architecture:2;
++		unsigned point2point:1;
++		unsigned hs_phy_type:2;
++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++
++		unsigned fs_phy_type:2;
++		unsigned num_dev_ep:4;
++		unsigned num_host_chan:4;
++		unsigned perio_ep_supported:1;
++		unsigned dynamic_fifo:1;
++		unsigned multi_proc_int:1;
++		unsigned reserved21:1;
++		unsigned nonperio_tx_q_depth:2;
++		unsigned host_perio_tx_q_depth:2;
++		unsigned dev_token_q_depth:5;
++		unsigned otg_enable_ic_usb:1;
++	} b;
++} hwcfg2_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config3
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg3_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/* GHWCFG3 */
++		unsigned xfer_size_cntr_width:4;
++		unsigned packet_size_cntr_width:3;
++		unsigned otg_func:1;
++		unsigned i2c:1;
++		unsigned vendor_ctrl_if:1;
++		unsigned optional_features:1;
++		unsigned synch_reset_type:1;
++		unsigned adp_supp:1;
++		unsigned otg_enable_hsic:1;
++		unsigned bc_support:1;
++		unsigned otg_lpm_en:1;
++		unsigned dfifo_depth:16;
++	} b;
++} hwcfg3_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config4
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned num_dev_perio_in_ep:4;
++		unsigned power_optimiz:1;
++		unsigned min_ahb_freq:1;
++		unsigned hiber:1;
++		unsigned xhiber:1;
++		unsigned reserved:6;
++		unsigned utmi_phy_data_width:2;
++		unsigned num_dev_mode_ctrl_ep:4;
++		unsigned iddig_filt_en:1;
++		unsigned vbus_valid_filt_en:1;
++		unsigned a_valid_filt_en:1;
++		unsigned b_valid_filt_en:1;
++		unsigned session_end_filt_en:1;
++		unsigned ded_fifo_en:1;
++		unsigned num_in_eps:4;
++		unsigned desc_dma:1;
++		unsigned desc_dma_dyn:1;
++	} b;
++} hwcfg4_data_t;
++
++/**
++ * This union represents the bit fields of the Core LPM Configuration
++ * Register (GLPMCFG). Set the bits using bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union glpmctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** LPM-Capable (LPMCap) (Device and Host)
++		 * The application uses this bit to control
++		 * the DWC_otg core LPM capabilities.
++		 */
++		unsigned lpm_cap_en:1;
++		/** LPM response programmed by application (AppL1Res) (Device)
++		 * Handshake response to LPM token pre-programmed
++		 * by device application software.
++		 */
++		unsigned appl_resp:1;
++		/** Host Initiated Resume Duration (HIRD) (Device and Host)
++		 * In Host mode this field indicates the value of HIRD
++		 * to be sent in an LPM transaction.
++		 * In Device mode this field is updated with the
++		 * Received LPM Token HIRD bmAttribute
++		 * when an ACK/NYET/STALL response is sent
++		 * to an LPM transaction.
++		 */
++		unsigned hird:4;
++		/** RemoteWakeEnable (bRemoteWake) (Device and Host)
++		 * In Host mode this bit indicates the value of remote
++		 * wake up to be sent in wIndex field of LPM transaction.
++		 * In Device mode this field is updated with the
++		 * Received LPM Token bRemoteWake bmAttribute
++		 * when an ACK/NYET/STALL response is sent
++		 * to an LPM transaction.
++		 */
++		unsigned rem_wkup_en:1;
++		/** Enable utmi_sleep_n (EnblSlpM) (Device and Host)
++		 * The application uses this bit to control
++		 * the utmi_sleep_n assertion to the PHY when in L1 state.
++		 */
++		unsigned en_utmi_sleep:1;
++		/** HIRD Threshold (HIRD_Thres) (Device and Host)
++		 */
++		unsigned hird_thres:5;
++		/** LPM Response (CoreL1Res) (Device and Host)
++		 * In Host mode this bit contains handsake response to
++		 * LPM transaction.
++		 * In Device mode the response of the core to
++		 * LPM transaction received is reflected in these two bits.
++		 	- 0x0 : ERROR (No handshake response)
++			- 0x1 : STALL
++			- 0x2 : NYET
++			- 0x3 : ACK			
++		 */
++		unsigned lpm_resp:2;
++		/** Port Sleep Status (SlpSts) (Device and Host)
++		 * This bit is set as long as a Sleep condition
++		 * is present on the USB bus.
++		 */
++		unsigned prt_sleep_sts:1;
++		/** Sleep State Resume OK (L1ResumeOK) (Device and Host)
++		 * Indicates that the application or host
++		 * can start resume from Sleep state.
++		 */
++		unsigned sleep_state_resumeok:1;
++		/** LPM channel Index (LPM_Chnl_Indx) (Host)
++		 * The channel number on which the LPM transaction
++		 * has to be applied while sending
++		 * an LPM transaction to the local device.
++		 */
++		unsigned lpm_chan_index:4;
++		/** LPM Retry Count (LPM_Retry_Cnt) (Host)
++		 * Number host retries that would be performed
++		 * if the device response was not valid response.
++		 */
++		unsigned retry_count:3;
++		/** Send LPM Transaction (SndLPM) (Host)
++		 * When set by application software,
++		 * an LPM transaction containing two tokens
++		 * is sent.
++		 */
++		unsigned send_lpm:1;
++		/** LPM Retry status (LPM_RetryCnt_Sts) (Host)
++		 * Number of LPM Host Retries still remaining
++		 * to be transmitted for the current LPM sequence
++		 */
++		unsigned retry_count_sts:3;
++		unsigned reserved28_29:2;
++		/** In host mode once this bit is set, the host
++		 * configures to drive the HSIC Idle state on the bus.
++		 * It then waits for the  device to initiate the Connect sequence.
++		 * In device mode once this bit is set, the device waits for
++		 * the HSIC Idle line state on the bus. Upon receving the Idle
++		 * line state, it initiates the HSIC Connect sequence.
++		 */
++		unsigned hsic_connect:1;
++		/** This bit overrides and functionally inverts
++		 * the if_select_hsic input port signal.
++		 */
++		unsigned inv_sel_hsic:1;
++	} b;
++} glpmcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core ADP Timer, Control and
++ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union adpctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Probe Discharge (PRB_DSCHG)
++		 *  These bits set the times for TADP_DSCHG. 
++		 *  These bits are defined as follows:
++		 *  2'b00 - 4 msec
++		 *  2'b01 - 8 msec
++		 *  2'b10 - 16 msec
++		 *  2'b11 - 32 msec
++		 */
++		unsigned prb_dschg:2;
++		/** Probe Delta (PRB_DELTA)
++		 *  These bits set the resolution for RTIM   value.
++		 *  The bits are defined in units of 32 kHz clock cycles as follows:
++		 *  2'b00  -  1 cycles
++		 *  2'b01  -  2 cycles
++		 *  2'b10 -  3 cycles
++		 *  2'b11 - 4 cycles
++		 *  For example if this value is chosen to 2'b01, it means that RTIM
++		 *  increments for every 3(three) 32Khz clock cycles.
++		 */
++		unsigned prb_delta:2;
++		/** Probe Period (PRB_PER)
++		 *  These bits sets the TADP_PRD as shown in Figure 4 as follows:
++		 *  2'b00  -  0.625 to 0.925 sec (typical 0.775 sec)
++		 *  2'b01  -  1.25 to 1.85 sec (typical 1.55 sec)
++		 *  2'b10  -  1.9 to 2.6 sec (typical 2.275 sec)
++		 *  2'b11  -  Reserved
++		 */
++		unsigned prb_per:2;
++		/** These bits capture the latest time it took for VBUS to ramp from 
++		 *  VADP_SINK to VADP_PRB. 
++		 *  0x000  -  1 cycles
++		 *  0x001  -  2 cycles
++		 *  0x002  -  3 cycles
++		 *  etc
++		 *  0x7FF  -  2048 cycles
++		 *  A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec.
++		*/
++		unsigned rtim:11;
++		/** Enable Probe (EnaPrb)
++		 *  When programmed to 1'b1, the core performs a probe operation.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned enaprb:1;
++		/** Enable Sense (EnaSns)
++		 *  When programmed to 1'b1, the core performs a Sense operation.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned enasns:1;
++		/** ADP Reset (ADPRes)
++		 *  When set, ADP controller is reset.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++ 		 */
++		unsigned adpres:1;
++		/** ADP Enable (ADPEn)
++		 *  When set, the core performs either ADP probing or sensing
++		 *  based on EnaPrb or EnaSns.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adpen:1;
++		/** ADP Probe Interrupt (ADP_PRB_INT)
++		 *  When this bit is set, it means that the VBUS
++		 *  voltage is greater than VADP_PRB or VADP_PRB is reached.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_prb_int:1;
++		/**
++		 *  ADP Sense Interrupt (ADP_SNS_INT)
++		 *  When this bit is set, it means that the VBUS voltage is greater than 
++		 *  VADP_SNS value or VADP_SNS is reached.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_sns_int:1;
++		/** ADP Tomeout Interrupt (ADP_TMOUT_INT)
++		 *  This bit is relevant only for an ADP probe.
++		 *  When this bit is set, it means that the ramp time has
++		 *  completed ie ADPCTL.RTIM has reached its terminal value
++		 *  of 0x7FF.  This is a debug feature that allows software
++		 *  to read the ramp time after each cycle.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_tmout_int:1;
++		/** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK)
++		 *  When this bit is set, it unmasks the interrupt due to ADP_PRB_INT.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_prb_int_msk:1;
++		/** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK)
++		 *  When this bit is set, it unmasks the interrupt due to ADP_SNS_INT.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_sns_int_msk:1;
++		/** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK)
++		 *  When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_tmout_int_msk:1;
++		/** Access Request
++		 * 2'b00 - Read/Write Valid (updated by the core) 
++		 * 2'b01 - Read
++		 * 2'b00 - Write
++		 * 2'b00 - Reserved
++		 */
++		unsigned ar:2;
++		 /** Reserved */
++		unsigned reserved29_31:3;
++	} b;
++} adpctl_data_t;
++
++////////////////////////////////////////////
++// Device Registers
++/**
++ * Device Global Registers. <i>Offsets 800h-BFFh</i>
++ *
++ * The following structures define the size and relative field offsets
++ * for the Device Mode Registers.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_global_regs {
++	/** Device Configuration Register. <i>Offset 800h</i> */
++	volatile uint32_t dcfg;
++	/** Device Control Register. <i>Offset: 804h</i> */
++	volatile uint32_t dctl;
++	/** Device Status Register (Read Only). <i>Offset: 808h</i> */
++	volatile uint32_t dsts;
++	/** Reserved. <i>Offset: 80Ch</i> */
++	uint32_t unused;
++	/** Device IN Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 810h</i> */
++	volatile uint32_t diepmsk;
++	/** Device OUT Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 814h</i> */
++	volatile uint32_t doepmsk;
++	/** Device All Endpoints Interrupt Register.  <i>Offset: 818h</i> */
++	volatile uint32_t daint;
++	/** Device All Endpoints Interrupt Mask Register.  <i>Offset:
++	 * 81Ch</i> */
++	volatile uint32_t daintmsk;
++	/** Device IN Token Queue Read Register-1 (Read Only).
++	 * <i>Offset: 820h</i> */
++	volatile uint32_t dtknqr1;
++	/** Device IN Token Queue Read Register-2 (Read Only).
++	 * <i>Offset: 824h</i> */
++	volatile uint32_t dtknqr2;
++	/** Device VBUS	 discharge Register.  <i>Offset: 828h</i> */
++	volatile uint32_t dvbusdis;
++	/** Device VBUS Pulse Register.	 <i>Offset: 82Ch</i> */
++	volatile uint32_t dvbuspulse;
++	/** Device IN Token Queue Read Register-3 (Read Only). /
++	 *	Device Thresholding control register (Read/Write)
++	 * <i>Offset: 830h</i> */
++	volatile uint32_t dtknqr3_dthrctl;
++	/** Device IN Token Queue Read Register-4 (Read Only). /
++	 *	Device IN EPs empty Inr. Mask Register (Read/Write)
++	 * <i>Offset: 834h</i> */
++	volatile uint32_t dtknqr4_fifoemptymsk;
++	/** Device Each Endpoint Interrupt Register (Read Only). /
++	 * <i>Offset: 838h</i> */
++	volatile uint32_t deachint;
++	/** Device Each Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 83Ch</i> */
++	volatile uint32_t deachintmsk;
++	/** Device Each In Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 840h</i> */
++	volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
++	/** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 880h</i> */
++	volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
++} dwc_otg_device_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Device Configuration
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.  Write the
++ * <i>d32</i> member to the dcfg register.
++ */
++typedef union dcfg_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Device Speed */
++		unsigned devspd:2;
++		/** Non Zero Length Status OUT Handshake */
++		unsigned nzstsouthshk:1;
++#define DWC_DCFG_SEND_STALL 1
++
++		unsigned ena32khzs:1;
++		/** Device Addresses */
++		unsigned devaddr:7;
++		/** Periodic Frame Interval */
++		unsigned perfrint:2;
++#define DWC_DCFG_FRAME_INTERVAL_80 0
++#define DWC_DCFG_FRAME_INTERVAL_85 1
++#define DWC_DCFG_FRAME_INTERVAL_90 2
++#define DWC_DCFG_FRAME_INTERVAL_95 3
++		
++		/** Enable Device OUT NAK for bulk in DDMA mode */
++		unsigned endevoutnak:1;
++
++		unsigned reserved14_17:4;
++		/** In Endpoint Mis-match count */
++		unsigned epmscnt:5;
++		/** Enable Descriptor DMA in Device mode */
++		unsigned descdma:1;
++		unsigned perschintvl:2;
++		unsigned resvalid:6;
++	} b;
++} dcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Device Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Remote Wakeup */
++		unsigned rmtwkupsig:1;
++		/** Soft Disconnect */
++		unsigned sftdiscon:1;
++		/** Global Non-Periodic IN NAK Status */
++		unsigned gnpinnaksts:1;
++		/** Global OUT NAK Status */
++		unsigned goutnaksts:1;
++		/** Test Control */
++		unsigned tstctl:3;
++		/** Set Global Non-Periodic IN NAK */
++		unsigned sgnpinnak:1;
++		/** Clear Global Non-Periodic IN NAK */
++		unsigned cgnpinnak:1;
++		/** Set Global OUT NAK */
++		unsigned sgoutnak:1;
++		/** Clear Global OUT NAK */
++		unsigned cgoutnak:1;
++		/** Power-On Programming Done */
++		unsigned pwronprgdone:1;
++		/** Reserved */
++		unsigned reserved:1;
++		/** Global Multi Count */
++		unsigned gmc:2;
++		/** Ignore Frame Number for ISOC EPs */
++		unsigned ifrmnum:1;
++		/** NAK on Babble */
++		unsigned nakonbble:1;
++		/** Enable Continue on BNA */
++		unsigned encontonbna:1;
++
++		unsigned reserved18_31:14;
++	} b;
++} dctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device Status
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Suspend Status */
++		unsigned suspsts:1;
++		/** Enumerated Speed */
++		unsigned enumspd:2;
++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ		   2
++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ		   3
++		/** Erratic Error */
++		unsigned errticerr:1;
++		unsigned reserved4_7:4;
++		/** Frame or Microframe Number of the received SOF */
++		unsigned soffn:14;
++		unsigned reserved22_31:10;
++	} b;
++} dsts_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN EP Interrupt
++ * Register and the Device IN EP Common Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union diepint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Transfer complete mask */
++		unsigned xfercompl:1;
++		/** Endpoint disable mask */
++		unsigned epdisabled:1;
++		/** AHB Error mask */
++		unsigned ahberr:1;
++		/** TimeOUT Handshake mask (non-ISOC EPs) */
++		unsigned timeout:1;
++		/** IN Token received with TxF Empty mask */
++		unsigned intktxfemp:1;
++		/** IN Token Received with EP mismatch mask */
++		unsigned intknepmis:1;
++		/** IN Endpoint NAK Effective mask */
++		unsigned inepnakeff:1;
++		/** Reserved */
++		unsigned emptyintr:1;
++
++		unsigned txfifoundrn:1;
++
++		/** BNA Interrupt mask */
++		unsigned bna:1;
++
++		unsigned reserved10_12:3;
++		/** BNA Interrupt mask */
++		unsigned nak:1;
++
++		unsigned reserved14_31:18;
++	} b;
++} diepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union diepint_data diepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP Interrupt
++ * Registerand Device OUT EP Common Interrupt Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union doepint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Transfer complete */
++		unsigned xfercompl:1;
++		/** Endpoint disable  */
++		unsigned epdisabled:1;
++		/** AHB Error */
++		unsigned ahberr:1;
++		/** Setup Phase Done (contorl EPs) */
++		unsigned setup:1;
++		/** OUT Token Received when Endpoint Disabled */
++		unsigned outtknepdis:1;
++
++		unsigned stsphsercvd:1;
++		/** Back-to-Back SETUP Packets Received */
++		unsigned back2backsetup:1;
++
++		unsigned reserved7:1;
++		/** OUT packet Error */
++		unsigned outpkterr:1;
++		/** BNA Interrupt */
++		unsigned bna:1;
++
++		unsigned reserved10:1;
++		/** Packet Drop Status */
++		unsigned pktdrpsts:1;
++		/** Babble Interrupt */
++		unsigned babble:1;
++		/** NAK Interrupt */
++		unsigned nak:1;
++		/** NYET Interrupt */
++		unsigned nyet:1;
++		/** Bit indicating setup packet received */
++		unsigned sr:1;
++
++		unsigned reserved16_31:16;
++	} b;
++} doepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union doepint_data doepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device All EP Interrupt
++ * and Mask Registers.
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union daint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** IN Endpoint bits */
++		unsigned in:16;
++		/** OUT Endpoint bits */
++		unsigned out:16;
++	} ep;
++	struct {
++		/** IN Endpoint bits */
++		unsigned inep0:1;
++		unsigned inep1:1;
++		unsigned inep2:1;
++		unsigned inep3:1;
++		unsigned inep4:1;
++		unsigned inep5:1;
++		unsigned inep6:1;
++		unsigned inep7:1;
++		unsigned inep8:1;
++		unsigned inep9:1;
++		unsigned inep10:1;
++		unsigned inep11:1;
++		unsigned inep12:1;
++		unsigned inep13:1;
++		unsigned inep14:1;
++		unsigned inep15:1;
++		/** OUT Endpoint bits */
++		unsigned outep0:1;
++		unsigned outep1:1;
++		unsigned outep2:1;
++		unsigned outep3:1;
++		unsigned outep4:1;
++		unsigned outep5:1;
++		unsigned outep6:1;
++		unsigned outep7:1;
++		unsigned outep8:1;
++		unsigned outep9:1;
++		unsigned outep10:1;
++		unsigned outep11:1;
++		unsigned outep12:1;
++		unsigned outep13:1;
++		unsigned outep14:1;
++		unsigned outep15:1;
++	} b;
++} daint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN Token Queue
++ * Read Registers.
++ * - Read the register into the <i>d32</i> member.
++ * - READ-ONLY Register
++ */
++typedef union dtknq1_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** In Token Queue Write Pointer */
++		unsigned intknwptr:5;
++		/** Reserved */
++		unsigned reserved05_06:2;
++		/** write pointer has wrapped. */
++		unsigned wrap_bit:1;
++		/** EP Numbers of IN Tokens 0 ... 4 */
++		unsigned epnums0_5:24;
++	} b;
++} dtknq1_data_t;
++
++/**
++ * This union represents Threshold control Register
++ * - Read and write the register into the <i>d32</i> member.
++ * - READ-WRITABLE Register
++ */
++typedef union dthrctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** non ISO Tx Thr. Enable */
++		unsigned non_iso_thr_en:1;
++		/** ISO Tx Thr. Enable */
++		unsigned iso_thr_en:1;
++		/** Tx Thr. Length */
++		unsigned tx_thr_len:9;
++		/** AHB Threshold ratio */
++		unsigned ahb_thr_ratio:2;
++		/** Reserved */
++		unsigned reserved13_15:3;
++		/** Rx Thr. Enable */
++		unsigned rx_thr_en:1;
++		/** Rx Thr. Length */
++		unsigned rx_thr_len:9;
++		unsigned reserved26:1;
++		/** Arbiter Parking Enable*/
++		unsigned arbprken:1;
++		/** Reserved */
++		unsigned reserved28_31:4;
++	} b;
++} dthrctl_data_t;
++
++/**
++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
++ * 900h-AFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_in_ep_regs {
++	/** Device IN Endpoint Control Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t diepctl;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
++	uint32_t reserved04;
++	/** Device IN Endpoint Interrupt Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t diepint;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device IN Endpoint Transfer Size
++	 * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t dieptsiz;
++	/** Device IN Endpoint DMA Address Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 14h</i> */
++	volatile uint32_t diepdma;
++	/** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 18h</i> */
++	volatile uint32_t dtxfsts;
++	/** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 1Ch</i> */
++	volatile uint32_t diepdmab;
++} dwc_otg_dev_in_ep_regs_t;
++
++/**
++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
++ * B00h-CFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_out_ep_regs {
++	/** Device OUT Endpoint Control Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t doepctl;
++	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 04h</i> */
++	uint32_t reserved04;
++	/** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t doepint;
++	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device OUT Endpoint Transfer Size Register. <i>Offset:
++	 * B00h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t doeptsiz;
++	/** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 14h</i> */
++	volatile uint32_t doepdma;
++	/** Reserved. <i>Offset:B00h + 	 * (ep_num * 20h) + 18h</i> */
++	uint32_t unused;
++	/** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 1Ch</i> */
++	uint32_t doepdmab;
++} dwc_otg_dev_out_ep_regs_t;
++
++/**
++ * This union represents the bit fields in the Device EP Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union depctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Maximum Packet Size
++		 * IN/OUT EPn
++		 * IN/OUT EP0 - 2 bits
++		 *	 2'b00: 64 Bytes
++		 *	 2'b01: 32
++		 *	 2'b10: 16
++		 *	 2'b11: 8 */
++		unsigned mps:11;
++#define DWC_DEP0CTL_MPS_64	 0
++#define DWC_DEP0CTL_MPS_32	 1
++#define DWC_DEP0CTL_MPS_16	 2
++#define DWC_DEP0CTL_MPS_8	 3
++
++		/** Next Endpoint
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned nextep:4;
++
++		/** USB Active Endpoint */
++		unsigned usbactep:1;
++
++		/** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
++		 * This field contains the PID of the packet going to
++		 * be received or transmitted on this endpoint. The
++		 * application should program the PID of the first
++		 * packet going to be received or transmitted on this
++		 * endpoint , after the endpoint is
++		 * activated. Application use the SetD1PID and
++		 * SetD0PID fields of this register to program either
++		 * D0 or D1 PID.
++		 *
++		 * The encoding for this field is
++		 *	 - 0: D0
++		 *	 - 1: D1
++		 */
++		unsigned dpid:1;
++
++		/** NAK Status */
++		unsigned naksts:1;
++
++		/** Endpoint Type
++		 *	2'b00: Control
++		 *	2'b01: Isochronous
++		 *	2'b10: Bulk
++		 *	2'b11: Interrupt */
++		unsigned eptype:2;
++
++		/** Snoop Mode
++		 * OUT EPn/OUT EP0
++		 * IN EPn/IN EP0 - reserved */
++		unsigned snp:1;
++
++		/** Stall Handshake */
++		unsigned stall:1;
++
++		/** Tx Fifo Number
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned txfnum:4;
++
++		/** Clear NAK */
++		unsigned cnak:1;
++		/** Set NAK */
++		unsigned snak:1;
++		/** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA0. Set Even
++		 * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to even (micro)
++		 * frame.
++		 */
++		unsigned setd0pid:1;
++		/** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA1 Set Odd
++		 * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to odd (micro) frame.
++		 */
++		unsigned setd1pid:1;
++
++		/** Endpoint Disable */
++		unsigned epdis:1;
++		/** Endpoint Enable */
++		unsigned epena:1;
++	} b;
++} depctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz_data {
++		/** raw register data */
++	uint32_t d32;
++		/** register bits */
++	struct {
++		/** Transfer size */
++		unsigned xfersize:19;
++/** Max packet count for EP (pow(2,10)-1) */
++#define MAX_PKT_CNT 1023
++		/** Packet Count */
++		unsigned pktcnt:10;
++		/** Multi Count - Periodic IN endpoints */
++		unsigned mc:2;
++		unsigned reserved:1;
++	} b;
++} deptsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP 0 Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz0_data {
++		/** raw register data */
++	uint32_t d32;
++		/** register bits */
++	struct {
++		/** Transfer size */
++		unsigned xfersize:7;
++				/** Reserved */
++		unsigned reserved7_18:12;
++		/** Packet Count */
++		unsigned pktcnt:2;
++				/** Reserved */
++		unsigned reserved21_28:8;
++				/**Setup Packet Count (DOEPTSIZ0 Only) */
++		unsigned supcnt:2;
++		unsigned reserved31;
++	} b;
++} deptsiz0_data_t;
++
++/////////////////////////////////////////////////
++// DMA Descriptor Specific Structures
++//
++
++/** Buffer status definitions */
++
++#define BS_HOST_READY	0x0
++#define BS_DMA_BUSY		0x1
++#define BS_DMA_DONE		0x2
++#define BS_HOST_BUSY	0x3
++
++/** Receive/Transmit status definitions */
++
++#define RTS_SUCCESS		0x0
++#define RTS_BUFFLUSH	0x1
++#define RTS_RESERVED	0x2
++#define RTS_BUFERR		0x3
++
++/**
++ * This union represents the bit fields in the DMA Descriptor
++ * status quadlet. Read the quadlet into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
++ * <i>b_iso_in</i> elements.
++ */
++typedef union dev_dma_desc_sts {
++		/** raw register data */
++	uint32_t d32;
++		/** quadlet bits */
++	struct {
++		/** Received number of bytes */
++		unsigned bytes:16;
++		/** NAK bit - only for OUT EPs */
++		unsigned nak:1;
++		unsigned reserved17_22:6;
++		/** Multiple Transfer - only for OUT EPs */
++		unsigned mtrf:1;
++		/** Setup Packet received - only for OUT EPs */
++		unsigned sr:1;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** Short Packet */
++		unsigned sp:1;
++		/** Last */
++		unsigned l:1;
++		/** Receive Status */
++		unsigned sts:2;
++		/** Buffer Status */
++		unsigned bs:2;
++	} b;
++
++//#ifdef DWC_EN_ISOC
++		/** iso out quadlet bits */
++	struct {
++		/** Received number of bytes */
++		unsigned rxbytes:11;
++
++		unsigned reserved11:1;
++		/** Frame Number */
++		unsigned framenum:11;
++		/** Received ISO Data PID */
++		unsigned pid:2;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** Short Packet */
++		unsigned sp:1;
++		/** Last */
++		unsigned l:1;
++		/** Receive Status */
++		unsigned rxsts:2;
++		/** Buffer Status */
++		unsigned bs:2;
++	} b_iso_out;
++
++		/** iso in quadlet bits */
++	struct {
++		/** Transmited number of bytes */
++		unsigned txbytes:12;
++		/** Frame Number */
++		unsigned framenum:11;
++		/** Transmited ISO Data PID */
++		unsigned pid:2;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** Short Packet */
++		unsigned sp:1;
++		/** Last */
++		unsigned l:1;
++		/** Transmit Status */
++		unsigned txsts:2;
++		/** Buffer Status */
++		unsigned bs:2;
++	} b_iso_in;
++//#endif                                /* DWC_EN_ISOC */
++} dev_dma_desc_sts_t;
++
++/**
++ * DMA Descriptor structure
++ *
++ * DMA Descriptor structure contains two quadlets:
++ * Status quadlet and Data buffer pointer.
++ */
++typedef struct dwc_otg_dev_dma_desc {
++	/** DMA Descriptor status quadlet */
++	dev_dma_desc_sts_t status;
++	/** DMA Descriptor data buffer pointer */
++	uint32_t buf;
++} dwc_otg_dev_dma_desc_t;
++
++/**
++ * The dwc_otg_dev_if structure contains information needed to manage
++ * the DWC_otg controller acting in device mode. It represents the
++ * programming view of the device-specific aspects of the controller.
++ */
++typedef struct dwc_otg_dev_if {
++	/** Pointer to device Global registers.
++	 * Device Global Registers starting at offset 800h
++	 */
++	dwc_otg_device_global_regs_t *dev_global_regs;
++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
++
++	/**
++	 * Device Logical IN Endpoint-Specific Registers 900h-AFCh
++	 */
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_IN_EP_REG_OFFSET 0x900
++#define DWC_EP_REG_OFFSET 0x20
++
++	/** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++	dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
++
++	/* Device configuration information */
++	uint8_t speed;				 /**< Device Speed	0: Unknown, 1: LS, 2:FS, 3: HS */
++	uint8_t num_in_eps;		 /**< Number # of Tx EP range: 0-15 exept ep0 */
++	uint8_t num_out_eps;		 /**< Number # of Rx EP range: 0-15 exept ep 0*/
++
++	/** Size of periodic FIFOs (Bytes) */
++	uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++	/** Size of Tx FIFOs (Bytes) */
++	uint16_t tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flags and length varaiables **/
++	uint16_t rx_thr_en;
++	uint16_t iso_tx_thr_en;
++	uint16_t non_iso_tx_thr_en;
++
++	uint16_t rx_thr_length;
++	uint16_t tx_thr_length;
++
++	/**
++	 * Pointers to the DMA Descriptors for EP0 Control
++	 * transfers (virtual and physical)
++	 */
++
++	/** 2 descriptors for SETUP packets */
++	dwc_dma_t dma_setup_desc_addr[2];
++	dwc_otg_dev_dma_desc_t *setup_desc_addr[2];
++
++	/** Pointer to Descriptor with latest SETUP packet */
++	dwc_otg_dev_dma_desc_t *psetup;
++
++	/** Index of current SETUP handler descriptor */
++	uint32_t setup_desc_index;
++
++	/** Descriptor for Data In or Status In phases */
++	dwc_dma_t dma_in_desc_addr;
++	dwc_otg_dev_dma_desc_t *in_desc_addr;
++
++	/** Descriptor for Data Out or Status Out phases */
++	dwc_dma_t dma_out_desc_addr;
++	dwc_otg_dev_dma_desc_t *out_desc_addr;
++
++	/** Setup Packet Detected - if set clear NAK when queueing */
++	uint32_t spd;
++	/** Isoc ep pointer on which incomplete happens */
++	void *isoc_ep;
++
++} dwc_otg_dev_if_t;
++
++/////////////////////////////////////////////////
++// Host Mode Register Structures
++//
++/**
++ * The Host Global Registers structure defines the size and relative
++ * field offsets for the Host Mode Global Registers.  Host Global
++ * Registers offsets 400h-7FFh.
++*/
++typedef struct dwc_otg_host_global_regs {
++	/** Host Configuration Register.   <i>Offset: 400h</i> */
++	volatile uint32_t hcfg;
++	/** Host Frame Interval Register.	<i>Offset: 404h</i> */
++	volatile uint32_t hfir;
++	/** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
++	volatile uint32_t hfnum;
++	/** Reserved.	<i>Offset: 40Ch</i> */
++	uint32_t reserved40C;
++	/** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
++	volatile uint32_t hptxsts;
++	/** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
++	volatile uint32_t haint;
++	/** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
++	volatile uint32_t haintmsk;
++	/** Host Frame List Base Address Register . <i>Offset: 41Ch</i> */
++	volatile uint32_t hflbaddr;
++} dwc_otg_host_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Configuration Register.
++ * Read the register into the <i>d32</i> member then set/clear the bits using
++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
++ */
++typedef union hcfg_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** FS/LS Phy Clock Select */
++		unsigned fslspclksel:2;
++#define DWC_HCFG_30_60_MHZ 0
++#define DWC_HCFG_48_MHZ	   1
++#define DWC_HCFG_6_MHZ	   2
++
++		/** FS/LS Only Support */
++		unsigned fslssupp:1;
++		unsigned reserved3_6:4;
++		/** Enable 32-KHz Suspend Mode */
++		unsigned ena32khzs:1;
++		/** Resume Validation Periiod */
++		unsigned resvalid:8;
++		unsigned reserved16_22:7;
++		/** Enable Scatter/gather DMA in Host mode */
++		unsigned descdma:1;
++		/** Frame List Entries */
++		unsigned frlisten:2;
++		/** Enable Periodic Scheduling */
++		unsigned perschedena:1;
++		unsigned reserved27_30:4;
++		unsigned modechtimen:1;
++	} b;
++} hcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register. 
++ */
++typedef union hfir_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned frint:16;
++		unsigned hfirrldctrl:1;
++		unsigned reserved:15;
++	} b;
++} hfir_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register. 
++ */
++typedef union hfnum_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned frnum:16;
++#define DWC_HFNUM_MAX_FRNUM 0x3FFF
++		unsigned frrem:16;
++	} b;
++} hfnum_data_t;
++
++typedef union hptxsts_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned ptxfspcavail:16;
++		unsigned ptxqspcavail:8;
++		/** Top of the Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (last entry for the selected channel)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - Zero length
++		 *	  - 2'b01 - Ping
++		 *	  - 2'b10 - Disable
++		 *	- bits 30:27 - Channel Number
++		 *	- bit 31 - Odd/even microframe
++		 */
++		unsigned ptxqtop_terminate:1;
++		unsigned ptxqtop_token:2;
++		unsigned ptxqtop_chnum:4;
++		unsigned ptxqtop_odd:1;
++	} b;
++} hptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Port Control and Status
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hprt0 register.
++ */
++typedef union hprt0_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned prtconnsts:1;
++		unsigned prtconndet:1;
++		unsigned prtena:1;
++		unsigned prtenchng:1;
++		unsigned prtovrcurract:1;
++		unsigned prtovrcurrchng:1;
++		unsigned prtres:1;
++		unsigned prtsusp:1;
++		unsigned prtrst:1;
++		unsigned reserved9:1;
++		unsigned prtlnsts:2;
++		unsigned prtpwr:1;
++		unsigned prttstctl:4;
++		unsigned prtspd:2;
++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
++#define DWC_HPRT0_PRTSPD_LOW_SPEED	2
++		unsigned reserved19_31:13;
++	} b;
++} hprt0_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register. 
++ */
++typedef union haint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned ch0:1;
++		unsigned ch1:1;
++		unsigned ch2:1;
++		unsigned ch3:1;
++		unsigned ch4:1;
++		unsigned ch5:1;
++		unsigned ch6:1;
++		unsigned ch7:1;
++		unsigned ch8:1;
++		unsigned ch9:1;
++		unsigned ch10:1;
++		unsigned ch11:1;
++		unsigned ch12:1;
++		unsigned ch13:1;
++		unsigned ch14:1;
++		unsigned ch15:1;
++		unsigned reserved:16;
++	} b;
++
++	struct {
++		unsigned chint:16;
++		unsigned reserved:16;
++	} b2;
++} haint_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register. 
++ */
++typedef union haintmsk_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned ch0:1;
++		unsigned ch1:1;
++		unsigned ch2:1;
++		unsigned ch3:1;
++		unsigned ch4:1;
++		unsigned ch5:1;
++		unsigned ch6:1;
++		unsigned ch7:1;
++		unsigned ch8:1;
++		unsigned ch9:1;
++		unsigned ch10:1;
++		unsigned ch11:1;
++		unsigned ch12:1;
++		unsigned ch13:1;
++		unsigned ch14:1;
++		unsigned ch15:1;
++		unsigned reserved:16;
++	} b;
++
++	struct {
++		unsigned chint:16;
++		unsigned reserved:16;
++	} b2;
++} haintmsk_data_t;
++
++/**
++ * Host Channel Specific Registers. <i>500h-5FCh</i>
++ */
++typedef struct dwc_otg_hc_regs {
++	/** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
++	volatile uint32_t hcchar;
++	/** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
++	volatile uint32_t hcsplt;
++	/** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
++	volatile uint32_t hcint;
++	/** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
++	volatile uint32_t hcintmsk;
++	/** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
++	volatile uint32_t hctsiz;
++	/** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
++	volatile uint32_t hcdma;
++	volatile uint32_t reserved;
++	/** Host Channel 0 DMA Buffer Address Register. <i>Offset: 500h + (chan_num * 20h) + 1Ch</i> */
++	volatile uint32_t hcdmab;
++} dwc_otg_hc_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Characteristics
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hcchar_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Maximum packet size in bytes */
++		unsigned mps:11;
++
++		/** Endpoint number */
++		unsigned epnum:4;
++
++		/** 0: OUT, 1: IN */
++		unsigned epdir:1;
++
++		unsigned reserved:1;
++
++		/** 0: Full/high speed device, 1: Low speed device */
++		unsigned lspddev:1;
++
++		/** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++		unsigned eptype:2;
++
++		/** Packets per frame for periodic transfers. 0 is reserved. */
++		unsigned multicnt:2;
++
++		/** Device address */
++		unsigned devaddr:7;
++
++		/**
++		 * Frame to transmit periodic transaction.
++		 * 0: even, 1: odd
++		 */
++		unsigned oddfrm:1;
++
++		/** Channel disable */
++		unsigned chdis:1;
++
++		/** Channel enable */
++		unsigned chen:1;
++	} b;
++} hcchar_data_t;
++
++typedef union hcsplt_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Port Address */
++		unsigned prtaddr:7;
++
++		/** Hub Address */
++		unsigned hubaddr:7;
++
++		/** Transaction Position */
++		unsigned xactpos:2;
++#define DWC_HCSPLIT_XACTPOS_MID 0
++#define DWC_HCSPLIT_XACTPOS_END 1
++#define DWC_HCSPLIT_XACTPOS_BEGIN 2
++#define DWC_HCSPLIT_XACTPOS_ALL 3
++
++		/** Do Complete Split */
++		unsigned compsplt:1;
++
++		/** Reserved */
++		unsigned reserved:14;
++
++		/** Split Enble */
++		unsigned spltena:1;
++	} b;
++} hcsplt_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register. 
++ */
++typedef union hcint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Transfer Complete */
++		unsigned xfercomp:1;
++		/** Channel Halted */
++		unsigned chhltd:1;
++		/** AHB Error */
++		unsigned ahberr:1;
++		/** STALL Response Received */
++		unsigned stall:1;
++		/** NAK Response Received */
++		unsigned nak:1;
++		/** ACK Response Received */
++		unsigned ack:1;
++		/** NYET Response Received */
++		unsigned nyet:1;
++		/** Transaction Err */
++		unsigned xacterr:1;
++		/** Babble Error */
++		unsigned bblerr:1;
++		/** Frame Overrun */
++		unsigned frmovrun:1;
++		/** Data Toggle Error */
++		unsigned datatglerr:1;
++		/** Buffer Not Available (only for DDMA mode) */
++		unsigned bna:1;
++		/** Exessive transaction error (only for DDMA mode) */
++		unsigned xcs_xact:1;
++		/** Frame List Rollover interrupt */
++		unsigned frm_list_roll:1;
++		/** Reserved */
++		unsigned reserved14_31:18;
++	} b;
++} hcint_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Interrupt Mask
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcintmsk register.
++ */
++typedef union hcintmsk_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned xfercompl:1;
++		unsigned chhltd:1;
++		unsigned ahberr:1;
++		unsigned stall:1;
++		unsigned nak:1;
++		unsigned ack:1;
++		unsigned nyet:1;
++		unsigned xacterr:1;
++		unsigned bblerr:1;
++		unsigned frmovrun:1;
++		unsigned datatglerr:1;
++		unsigned bna:1;
++		unsigned xcs_xact:1;
++		unsigned frm_list_roll:1;
++		unsigned reserved14_31:18;
++	} b;
++} hcintmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Transfer Size
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++
++typedef union hctsiz_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Total transfer size in bytes */
++		unsigned xfersize:19;
++
++		/** Data packets to transfer */
++		unsigned pktcnt:10;
++
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control), SETUP (Control)
++		 */
++		unsigned pid:2;
++#define DWC_HCTSIZ_DATA0 0
++#define DWC_HCTSIZ_DATA1 2
++#define DWC_HCTSIZ_DATA2 1
++#define DWC_HCTSIZ_MDATA 3
++#define DWC_HCTSIZ_SETUP 3
++
++		/** Do PING protocol when 1 */
++		unsigned dopng:1;
++	} b;
++
++	/** register bits */
++	struct {
++		/** Scheduling information */
++		unsigned schinfo:8;
++
++		/** Number of transfer descriptors.
++		 * Max value:
++		 * 64 in general,
++		 * 256 only for HS isochronous endpoint.
++		 */
++		unsigned ntd:8;
++
++		/** Data packets to transfer */
++		unsigned reserved16_28:13;
++
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control)
++		 */
++		unsigned pid:2;
++
++		/** Do PING protocol when 1 */
++		unsigned dopng:1;
++	} b_ddma;
++} hctsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Host DMA Address 
++ * Register used in Descriptor DMA mode.
++ */
++typedef union hcdma_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved0_2:3;
++		/** Current Transfer Descriptor. Not used for ISOC */
++		unsigned ctd:8;
++		/** Start Address of Descriptor List */
++		unsigned dma_addr:21;
++	} b;
++} hcdma_data_t;
++
++/**
++ * This union represents the bit fields in the DMA Descriptor
++ * status quadlet for host mode. Read the quadlet into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union host_dma_desc_sts {
++	/** raw register data */
++	uint32_t d32;
++	/** quadlet bits */
++
++	/* for non-isochronous  */
++	struct {
++		/** Number of bytes */
++		unsigned n_bytes:17;
++		/** QTD offset to jump when Short Packet received - only for IN EPs */
++		unsigned qtd_offset:6;
++		/**
++		 * Set to request the core to jump to alternate QTD if
++		 * Short Packet received - only for IN EPs
++		 */
++		unsigned a_qtd:1;
++		 /**
++		  * Setup Packet bit. When set indicates that buffer contains
++		  * setup packet.
++		  */
++		unsigned sup:1;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** End of List */
++		unsigned eol:1;
++		unsigned reserved27:1;
++		/** Rx/Tx Status */
++		unsigned sts:2;
++#define DMA_DESC_STS_PKTERR	1
++		unsigned reserved30:1;
++		/** Active Bit */
++		unsigned a:1;
++	} b;
++	/* for isochronous */
++	struct {
++		/** Number of bytes */
++		unsigned n_bytes:12;
++		unsigned reserved12_24:13;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		unsigned reserved26_27:2;
++		/** Rx/Tx Status */
++		unsigned sts:2;
++		unsigned reserved30:1;
++		/** Active Bit */
++		unsigned a:1;
++	} b_isoc;
++} host_dma_desc_sts_t;
++
++#define	MAX_DMA_DESC_SIZE		131071
++#define MAX_DMA_DESC_NUM_GENERIC	64
++#define MAX_DMA_DESC_NUM_HS_ISOC	256
++#define MAX_FRLIST_EN_NUM		64
++/**
++ * Host-mode DMA Descriptor structure
++ *
++ * DMA Descriptor structure contains two quadlets:
++ * Status quadlet and Data buffer pointer.
++ */
++typedef struct dwc_otg_host_dma_desc {
++	/** DMA Descriptor status quadlet */
++	host_dma_desc_sts_t status;
++	/** DMA Descriptor data buffer pointer */
++	uint32_t buf;
++} dwc_otg_host_dma_desc_t;
++
++/** OTG Host Interface Structure.
++ *
++ * The OTG Host Interface Structure structure contains information
++ * needed to manage the DWC_otg controller acting in host mode. It
++ * represents the programming view of the host-specific aspects of the
++ * controller.
++ */
++typedef struct dwc_otg_host_if {
++	/** Host Global Registers starting at offset 400h.*/
++	dwc_otg_host_global_regs_t *host_global_regs;
++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
++
++	/** Host Port 0 Control and Status Register */
++	volatile uint32_t *hprt0;
++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
++
++	/** Host Channel Specific Registers at offsets 500h-5FCh. */
++	dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
++#define DWC_OTG_CHAN_REGS_OFFSET 0x20
++
++	/* Host configuration information */
++	/** Number of Host Channels (range: 1-16) */
++	uint8_t num_host_channels;
++	/** Periodic EPs supported (0: no, 1: yes) */
++	uint8_t perio_eps_supported;
++	/** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
++	uint16_t perio_tx_fifo_size;
++
++} dwc_otg_host_if_t;
++
++/**
++ * This union represents the bit fields in the Power and Clock Gating Control
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union pcgcctl_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Stop Pclk */
++		unsigned stoppclk:1;
++		/** Gate Hclk */
++		unsigned gatehclk:1;
++		/** Power Clamp */
++		unsigned pwrclmp:1;
++		/** Reset Power Down Modules */
++		unsigned rstpdwnmodule:1;
++		/** Reserved */
++		unsigned reserved:1;
++		/** Enable Sleep Clock Gating (Enbl_L1Gating) */
++		unsigned enbl_sleep_gating:1;
++		/** PHY In Sleep (PhySleep) */
++		unsigned phy_in_sleep:1;
++		/** Deep Sleep*/
++		unsigned deep_sleep:1;
++		unsigned resetaftsusp:1;
++		unsigned restoremode:1;
++		unsigned enbl_extnd_hiber:1;
++		unsigned extnd_hiber_pwrclmp:1;
++		unsigned extnd_hiber_switch:1;
++		unsigned ess_reg_restored:1;
++		unsigned prt_clk_sel:2;
++		unsigned port_power:1;
++		unsigned max_xcvrselect:2;
++		unsigned max_termsel:1;
++		unsigned mac_dev_addr:7;
++		unsigned p2hd_dev_enum_spd:2;
++		unsigned p2hd_prt_spd:2;
++		unsigned if_dev_mode:1;
++	} b;
++} pcgcctl_data_t;
++
++/**
++ * This union represents the bit fields in the Global Data FIFO Software
++ * Configuration Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union gdfifocfg_data {
++	/* raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** OTG Data FIFO depth */
++		unsigned gdfifocfg:16;
++		/** Start address of EP info controller */
++		unsigned epinfobase:16;
++	} b;
++} gdfifocfg_data_t;
++
++/**
++ * This union represents the bit fields in the Global Power Down Register
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gpwrdn_data {
++	/* raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** PMU Interrupt Select */
++		unsigned pmuintsel:1;
++		/** PMU Active */
++		unsigned pmuactv:1;
++		/** Restore */
++		unsigned restore:1;
++		/** Power Down Clamp */
++		unsigned pwrdnclmp:1;
++		/** Power Down Reset */
++		unsigned pwrdnrstn:1;
++		/** Power Down Switch */
++		unsigned pwrdnswtch:1;
++		/** Disable VBUS */
++		unsigned dis_vbus:1;
++		/** Line State Change */
++		unsigned lnstschng:1;
++		/** Line state change mask */
++		unsigned lnstchng_msk:1;
++		/** Reset Detected */
++		unsigned rst_det:1;
++		/** Reset Detect mask */
++		unsigned rst_det_msk:1;
++		/** Disconnect Detected */
++		unsigned disconn_det:1;
++		/** Disconnect Detect mask */
++		unsigned disconn_det_msk:1;
++		/** Connect Detected*/
++		unsigned connect_det:1;
++		/** Connect Detected Mask*/
++		unsigned connect_det_msk:1;
++		/** SRP Detected */
++		unsigned srp_det:1;
++		/** SRP Detect mask */
++		unsigned srp_det_msk:1;
++		/** Status Change Interrupt */
++		unsigned sts_chngint:1;
++		/** Status Change Interrupt Mask */
++		unsigned sts_chngint_msk:1;
++		/** Line State */
++		unsigned linestate:2;
++		/** Indicates current mode(status of IDDIG signal) */
++		unsigned idsts:1;
++		/** B Session Valid signal status*/
++		unsigned bsessvld:1;
++		/** ADP Event Detected */
++		unsigned adp_int:1;
++		/** Multi Valued ID pin */
++		unsigned mult_val_id_bc:5;
++		/** Reserved 24_31 */
++		unsigned reserved29_31:3;
++	} b;
++} gpwrdn_data_t;
++
++#endif
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/Makefile linux-rpi-3.10.y/drivers/usb/host/dwc_otg/Makefile
+--- linux-3.10/drivers/usb/host/dwc_otg/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,81 @@
++#
++# Makefile for DWC_otg Highspeed USB controller driver
++#
++
++ifneq ($(KERNELRELEASE),)
++
++# Use the BUS_INTERFACE variable to compile the software for either 
++# PCI(PCI_INTERFACE) or LM(LM_INTERFACE) bus.
++ifeq ($(BUS_INTERFACE),)
++#	BUS_INTERFACE = -DPCI_INTERFACE
++#	BUS_INTERFACE = -DLM_INTERFACE
++        BUS_INTERFACE = -DPLATFORM_INTERFACE
++endif
++
++#EXTRA_CFLAGS	+= -DDEBUG
++#EXTRA_CFLAGS	+= -DDWC_OTG_DEBUGLEV=1 # reduce common debug msgs
++
++# Use one of the following flags to compile the software in host-only or
++# device-only mode.
++#EXTRA_CFLAGS        += -DDWC_HOST_ONLY
++#EXTRA_CFLAGS        += -DDWC_DEVICE_ONLY
++
++EXTRA_CFLAGS	+= -Dlinux -DDWC_HS_ELECT_TST
++#EXTRA_CFLAGS	+= -DDWC_EN_ISOC
++EXTRA_CFLAGS   	+= -I$(obj)/../dwc_common_port
++#EXTRA_CFLAGS   	+= -I$(PORTLIB)
++EXTRA_CFLAGS   	+= -DDWC_LINUX
++EXTRA_CFLAGS   	+= $(CFI)
++EXTRA_CFLAGS	+= $(BUS_INTERFACE)
++#EXTRA_CFLAGS	+= -DDWC_DEV_SRPCAP
++
++obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o
++
++dwc_otg-objs	:= dwc_otg_driver.o dwc_otg_attr.o 
++dwc_otg-objs	+= dwc_otg_cil.o dwc_otg_cil_intr.o 
++dwc_otg-objs	+= dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o 
++dwc_otg-objs	+= dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o
++dwc_otg-objs	+= dwc_otg_adp.o
++dwc_otg-objs	+= dwc_otg_mphi_fix.o
++ifneq ($(CFI),)
++dwc_otg-objs	+= dwc_otg_cfi.o
++endif
++
++kernrelwd := $(subst ., ,$(KERNELRELEASE))
++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd))
++
++ifneq ($(kernrel3),2.6.20)
++EXTRA_CFLAGS += $(CPPFLAGS)
++endif
++
++else
++
++PWD		:= $(shell pwd)
++PORTLIB		:= $(PWD)/../dwc_common_port
++
++# Command paths
++CTAGS		:= $(CTAGS)
++DOXYGEN		:= $(DOXYGEN)
++
++default: portlib
++	$(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++
++install: default
++	$(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install
++	$(MAKE) -C$(KDIR) M=$(PWD) modules_install	
++
++portlib:
++	$(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++	cp $(PORTLIB)/Module.symvers $(PWD)/
++
++docs:	$(wildcard *.[hc]) doc/doxygen.cfg
++	$(DOXYGEN) doc/doxygen.cfg
++
++tags:	$(wildcard *.[hc])
++	$(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
++
++
++clean:
++	rm -rf   *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers
++
++endif
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm
+--- linux-3.10/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,337 @@
++package dwc_otg_test;
++
++use strict;
++use Exporter ();
++
++use vars qw(@ISA @EXPORT
++$sysfsdir $paramdir $errors $params 
++);
++
++@ISA = qw(Exporter);
++
++#
++# Globals
++#
++$sysfsdir = "/sys/devices/lm0";
++$paramdir = "/sys/module/dwc_otg";
++$errors = 0;
++
++$params = [
++	   {
++	    NAME => "otg_cap",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 2
++	   },
++	   {
++	    NAME => "dma_enable",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   { 
++	    NAME => "dma_burst_size",
++	    DEFAULT => 32,
++	    ENUM => [1, 4, 8, 16, 32, 64, 128, 256],
++	    LOW => 1,
++	    HIGH => 256
++	   },
++	   { 
++	    NAME => "host_speed",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   { 
++	    NAME => "host_support_fs_ls_low_power",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   { 
++	    NAME => "host_ls_low_power_phy_clk",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   { 
++	    NAME => "dev_speed",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   { 
++	    NAME => "enable_dynamic_fifo",
++	    DEFAULT => 1,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   { 
++	    NAME => "data_fifo_size",
++	    DEFAULT => 8192,
++	    ENUM => [],
++	    LOW => 32,
++	    HIGH => 32768
++	   },
++	   { 
++	    NAME => "dev_rx_fifo_size",
++	    DEFAULT => 1064,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   { 
++	    NAME => "dev_nperio_tx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_1",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_2",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_3",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_4",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_5",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_6",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_7",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_8",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_9",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_10",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_11",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_12",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_13",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_14",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "dev_perio_tx_fifo_size_15",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   { 
++	    NAME => "host_rx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   { 
++	    NAME => "host_nperio_tx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   { 
++	    NAME => "host_perio_tx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   { 
++	    NAME => "max_transfer_size",
++	    DEFAULT => 65535,
++	    ENUM => [],
++	    LOW => 2047,
++	    HIGH => 65535
++	   },
++	   { 
++	    NAME => "max_packet_count",
++	    DEFAULT => 511,
++	    ENUM => [],
++	    LOW => 15,
++	    HIGH => 511
++	   },
++	   { 
++	    NAME => "host_channels",
++	    DEFAULT => 12,
++	    ENUM => [],
++	    LOW => 1,
++	    HIGH => 16
++	   },
++	   { 
++	    NAME => "dev_endpoints",
++	    DEFAULT => 6,
++	    ENUM => [],
++	    LOW => 1,
++	    HIGH => 15
++	   },
++	   { 
++	    NAME => "phy_type",
++	    DEFAULT => 1,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 2
++	   },
++	   { 
++	    NAME => "phy_utmi_width",
++	    DEFAULT => 16,
++	    ENUM => [8, 16],
++	    LOW => 8,
++	    HIGH => 16
++	   },
++	   { 
++	    NAME => "phy_ulpi_ddr",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	  ];
++
++
++#
++#
++sub check_arch {
++  $_ = `uname -m`;
++  chomp;
++  unless (m/armv4tl/) {
++    warn "# \n# Can't execute on $_.  Run on integrator platform.\n# \n";
++    return 0;
++  }
++  return 1;
++}
++
++#
++#
++sub load_module {
++  my $params = shift;
++  print "\nRemoving Module\n";
++  system "rmmod dwc_otg";
++  print "Loading Module\n";
++  if ($params ne "") {
++    print "Module Parameters: $params\n";
++  }
++  if (system("modprobe dwc_otg $params")) { 
++    warn "Unable to load module\n";
++    return 0; 
++  }
++  return 1;
++}
++
++#
++#
++sub test_status {
++  my $arg = shift;
++
++  print "\n";
++
++  if (defined $arg) {
++    warn "WARNING: $arg\n";
++  }
++  
++  if ($errors > 0) {
++    warn "TEST FAILED with $errors errors\n";
++    return 0;
++  } else {
++    print "TEST PASSED\n";
++    return 0 if (defined $arg);
++  }
++  return 1;
++}
++
++#
++#
++@EXPORT = qw(
++$sysfsdir
++$paramdir
++$params
++$errors
++check_arch
++load_module
++test_status
++);
++
++1;
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/test/Makefile linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/Makefile
+--- linux-3.10/drivers/usb/host/dwc_otg/test/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,16 @@
++
++PERL=/usr/bin/perl
++PL_TESTS=test_sysfs.pl test_mod_param.pl
++
++.PHONY : test
++test : perl_tests
++
++perl_tests :
++	@echo
++	@echo Running perl tests
++	@for test in $(PL_TESTS); do \
++	  if $(PERL) ./$$test ; then \
++	    echo "=======> $$test, PASSED" ; \
++	  else echo "=======> $$test, FAILED" ; \
++	  fi \
++	done
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/test/test_mod_param.pl linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/test_mod_param.pl
+--- linux-3.10/drivers/usb/host/dwc_otg/test/test_mod_param.pl	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/test_mod_param.pl	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,133 @@
++#!/usr/bin/perl -w
++# 
++# Run this program on the integrator.
++#
++# - Tests module parameter default values.
++# - Tests setting of valid module parameter values via modprobe.
++# - Tests invalid module parameter values.
++# -----------------------------------------------------------------------------
++use strict;
++use dwc_otg_test;
++
++check_arch() or die;
++
++#
++#
++sub test {
++  my ($param,$expected) = @_;
++  my $value = get($param);
++
++  if ($value == $expected) {
++    print "$param = $value, okay\n";
++  }
++
++  else {
++    warn "ERROR: value of $param != $expected, $value\n";
++    $errors ++;
++  }
++}
++
++#
++#
++sub get {
++  my $param = shift;
++  my $tmp = `cat $paramdir/$param`;
++  chomp $tmp;
++  return $tmp;
++}
++
++#
++#
++sub test_main {
++
++  print "\nTesting Module Parameters\n";
++
++  load_module("") or die;
++
++  # Test initial values
++  print "\nTesting Default Values\n";
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{DEFAULT});
++  }
++
++  # Test low value
++  print "\nTesting Low Value\n";
++  my $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} ";
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{LOW});
++  }
++
++  # Test high value
++  print "\nTesting High Value\n";
++  $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} ";
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{HIGH});
++  }
++
++  # Test Enum
++  print "\nTesting Enumerated\n";
++  foreach (@{$params}) {
++    if (defined $_->{ENUM}) {
++      my $value;
++      foreach $value (@{$_->{ENUM}}) {
++	$cmd_params = "$_->{NAME}=$value";
++	load_module($cmd_params) or die;
++	test ($_->{NAME}, $value);
++      }
++    }
++  }
++
++  # Test Invalid Values
++  print "\nTesting Invalid Values\n";
++  $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1;
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{DEFAULT});
++  }
++
++  $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1;
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{DEFAULT});
++  }
++
++  print "\nTesting Enumerated\n";
++  foreach (@{$params}) {
++    if (defined $_->{ENUM}) {
++      my $value;
++      foreach $value (@{$_->{ENUM}}) {
++	$value = $value + 1;
++	$cmd_params = "$_->{NAME}=$value";
++	load_module($cmd_params) or die;
++	test ($_->{NAME}, $_->{DEFAULT});
++	$value = $value - 2;
++	$cmd_params = "$_->{NAME}=$value";
++	load_module($cmd_params) or die;
++	test ($_->{NAME}, $_->{DEFAULT});
++      }
++    }
++  }
++
++  test_status() or die;
++}
++
++test_main();
++0;
+diff -urN linux-3.10/drivers/usb/host/dwc_otg/test/test_sysfs.pl linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/test_sysfs.pl
+--- linux-3.10/drivers/usb/host/dwc_otg/test/test_sysfs.pl	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/test_sysfs.pl	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,193 @@
++#!/usr/bin/perl -w
++# 
++# Run this program on the integrator
++# - Tests select sysfs attributes.
++# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc.
++# -----------------------------------------------------------------------------
++use strict;
++use dwc_otg_test;
++
++check_arch() or die;
++
++#
++#
++sub test {
++  my ($attr,$expected) = @_;
++  my $string = get($attr);
++
++  if ($string eq $expected) {
++    printf("$attr = $string, okay\n");
++  }
++  else {
++    warn "ERROR: value of $attr != $expected, $string\n";
++    $errors ++;
++  }
++}
++
++#
++#
++sub set {
++  my ($reg, $value) = @_;
++  system "echo $value > $sysfsdir/$reg";
++}
++
++#
++#
++sub get {
++  my $attr = shift;
++  my $string = `cat $sysfsdir/$attr`;
++  chomp $string;
++  if ($string =~ m/\s\=\s/) {
++    my $tmp;
++    ($tmp, $string) = split /\s=\s/, $string;
++  }
++  return $string;
++}
++
++#
++#
++sub test_main {
++  print("\nTesting Sysfs Attributes\n");
++
++  load_module("") or die;
++
++  # Test initial values of regoffset/regvalue/guid/gsnpsid
++  print("\nTesting Default Values\n");
++
++  test("regoffset", "0xffffffff");
++  test("regvalue", "invalid offset");
++  test("guid", "0x12345678");	# this will fail if it has been changed
++  test("gsnpsid", "0x4f54200a");
++
++  # Test operation of regoffset/regvalue
++  print("\nTesting regoffset\n");
++  set('regoffset', '5a5a5a5a');
++  test("regoffset", "0xffffffff");
++
++  set('regoffset', '0');
++  test("regoffset", "0x00000000");
++
++  set('regoffset', '40000');
++  test("regoffset", "0x00000000");
++
++  set('regoffset', '3ffff');
++  test("regoffset", "0x0003ffff");
++
++  set('regoffset', '1');
++  test("regoffset", "0x00000001");
++
++  print("\nTesting regvalue\n");
++  set('regoffset', '3c');
++  test("regvalue", "0x12345678");
++  set('regvalue', '5a5a5a5a');
++  test("regvalue", "0x5a5a5a5a");
++  set('regvalue','a5a5a5a5');
++  test("regvalue", "0xa5a5a5a5");
++  set('guid','12345678');
++
++  # Test HNP Capable
++  print("\nTesting HNP Capable bit\n");
++  set('hnpcapable', '1');
++  test("hnpcapable", "0x1");
++  set('hnpcapable','0');
++  test("hnpcapable", "0x0");
++
++  set('regoffset','0c');
++
++  my $old = get('gusbcfg');
++  print("setting hnpcapable\n");
++  set('hnpcapable', '1');
++  test("hnpcapable", "0x1");
++  test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9)));
++  test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9)));
++
++  $old = get('gusbcfg');
++  print("clearing hnpcapable\n");
++  set('hnpcapable', '0');
++  test("hnpcapable", "0x0");
++  test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9)));
++  test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9)));
++
++  # Test SRP Capable
++  print("\nTesting SRP Capable bit\n");
++  set('srpcapable', '1');
++  test("srpcapable", "0x1");
++  set('srpcapable','0');
++  test("srpcapable", "0x0");
++
++  set('regoffset','0c');
++
++  $old = get('gusbcfg');
++  print("setting srpcapable\n");
++  set('srpcapable', '1');
++  test("srpcapable", "0x1");
++  test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8)));
++  test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8)));
++
++  $old = get('gusbcfg');
++  print("clearing srpcapable\n");
++  set('srpcapable', '0');
++  test("srpcapable", "0x0");
++  test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8)));
++  test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8)));
++
++  # Test GGPIO
++  print("\nTesting GGPIO\n");
++  set('ggpio','5a5a5a5a');
++  test('ggpio','0x5a5a0000');
++  set('ggpio','a5a5a5a5');
++  test('ggpio','0xa5a50000');
++  set('ggpio','11110000');
++  test('ggpio','0x11110000');
++  set('ggpio','00001111');
++  test('ggpio','0x00000000');
++
++  # Test DEVSPEED
++  print("\nTesting DEVSPEED\n");
++  set('regoffset','800');
++  $old = get('regvalue');
++  set('devspeed','0');
++  test('devspeed','0x0');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3)));
++  set('devspeed','1');
++  test('devspeed','0x1');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1));
++  set('devspeed','2');
++  test('devspeed','0x2');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2));
++  set('devspeed','3');
++  test('devspeed','0x3');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3));
++  set('devspeed','4');
++  test('devspeed','0x0');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3)));
++  set('devspeed','5');
++  test('devspeed','0x1');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1));
++
++
++  #  mode	Returns the current mode:0 for device mode1 for host mode	Read
++  #  hnp	Initiate the Host Negotiation Protocol.  Read returns the status.	Read/Write
++  #  srp	Initiate the Session Request Protocol.  Read returns the status.	Read/Write
++  #  buspower	Get or Set the Power State of the bus (0 - Off or 1 - On) 	Read/Write
++  #  bussuspend	Suspend the USB bus.	Read/Write
++  #  busconnected	Get the connection status of the bus 	Read
++
++  #  gotgctl	Get or set the Core Control Status Register.	Read/Write
++  ##  gusbcfg	Get or set the Core USB Configuration Register	Read/Write
++  #  grxfsiz	Get or set the Receive FIFO Size Register	Read/Write
++  #  gnptxfsiz	Get or set the non-periodic Transmit Size Register	Read/Write
++  #  gpvndctl	Get or set the PHY Vendor Control Register	Read/Write
++  ##  ggpio	Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits.	Read/Write
++  ##  guid	Get or set the value of the User ID Register	Read/Write
++  ##  gsnpsid	Get the value of the Synopsys ID Regester	Read
++  ##  devspeed	Get or set the device speed setting in the DCFG register	Read/Write
++  #  enumspeed	Gets the device enumeration Speed.	Read
++  #  hptxfsiz	Get the value of the Host Periodic Transmit FIFO	Read
++  #  hprt0	Get or Set the value in the Host Port Control and Status Register	Read/Write
++
++  test_status("TEST NYI") or die;
++}
++
++test_main();
++0;
+diff -urN linux-3.10/drivers/usb/host/Kconfig linux-rpi-3.10.y/drivers/usb/host/Kconfig
+--- linux-3.10/drivers/usb/host/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -663,6 +663,19 @@
+ 	  To compile this driver a module, choose M here: the module
+ 	  will be called "hwa-hc".
+ 
++config USB_DWCOTG
++	tristate "Synopsis DWC host support"
++	depends on USB
++	help
++	  The Synopsis DWC controller is a dual-role
++	  host/peripheral/OTG ("On The Go") USB controllers.
++
++	  Enable this option to support this IP in host controller mode.
++	  If unsure, say N.
++
++	  To compile this driver as a module, choose M here: the
++	  modules built will be called dwc_otg and dwc_common_port.
++
+ config USB_IMX21_HCD
+        tristate "i.MX21 HCD support"
+        depends on ARM && ARCH_MXC
+diff -urN linux-3.10/drivers/usb/host/Makefile linux-rpi-3.10.y/drivers/usb/host/Makefile
+--- linux-3.10/drivers/usb/host/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/host/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -47,6 +47,8 @@
+ obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
+ obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
+ obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
++
++obj-$(CONFIG_USB_DWCOTG)        += dwc_otg/ dwc_common_port/
+ obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
+ obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+diff -urN linux-3.10/drivers/usb/Makefile linux-rpi-3.10.y/drivers/usb/Makefile
+--- linux-3.10/drivers/usb/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/usb/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -23,6 +23,7 @@
+ obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
+ obj-$(CONFIG_USB_HWA_HCD)	+= host/
+ obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
++obj-$(CONFIG_USB_DWCOTG)	+= host/
+ obj-$(CONFIG_USB_IMX21_HCD)	+= host/
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= host/
+ 
diff --git a/target/linux/brcm2708/patches-3.10/002-Main-bcm2708-linux-port.patch b/target/linux/brcm2708/patches-3.10/002-Main-bcm2708-linux-port.patch
new file mode 100644
index 0000000000..81d899b1ec
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/002-Main-bcm2708-linux-port.patch
@@ -0,0 +1,8404 @@
+diff -urN linux-3.10/arch/arm/configs/bcmrpi_cutdown_defconfig linux-rpi-3.10.y/arch/arm/configs/bcmrpi_cutdown_defconfig
+--- linux-3.10/arch/arm/configs/bcmrpi_cutdown_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/configs/bcmrpi_cutdown_defconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,504 @@
++CONFIG_EXPERIMENTAL=y
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++# CONFIG_UID16 is not set
++# CONFIG_KALLSYMS is not set
++CONFIG_EMBEDDED=y
++# CONFIG_VM_EVENT_COUNTERS is not set
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_ARCH_BCM2708=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_AEABI=y
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
++CONFIG_CPU_IDLE=y
++CONFIG_VFP=y
++CONFIG_BINFMT_MISC=m
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_NET_KEY=m
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_NET_PKTGEN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_ULTRA=y
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRDA_FAST_RR=y
++CONFIG_IRTTY_SIR=m
++CONFIG_KINGSUN_DONGLE=m
++CONFIG_KSDAZZLE_DONGLE=m
++CONFIG_KS959_DONGLE=m
++CONFIG_USB_IRDA=m
++CONFIG_SIGMATEL_FIR=m
++CONFIG_MCS_FIR=m
++CONFIG_BT=m
++CONFIG_BT_L2CAP=y
++CONFIG_BT_SCO=y
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++CONFIG_BT_HCIBTUSB=m
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBPA10X=m
++CONFIG_BT_HCIBFUSB=m
++CONFIG_BT_HCIVHCI=m
++CONFIG_BT_MRVL=m
++CONFIG_BT_MRVL_SDIO=m
++CONFIG_BT_ATH3K=m
++CONFIG_CFG80211=m
++CONFIG_MAC80211=m
++CONFIG_MAC80211_RC_PID=y
++CONFIG_MAC80211_MESH=y
++CONFIG_WIMAX=m
++CONFIG_NET_9P=m
++CONFIG_NFC=m
++CONFIG_NFC_PN533=m
++CONFIG_DEVTMPFS=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_CDROM_PKTCDVD=m
++CONFIG_MISC_DEVICES=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=m
++CONFIG_BLK_DEV_SR=m
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_TUN=m
++CONFIG_PHYLIB=m
++CONFIG_MDIO_BITBANG=m
++CONFIG_NET_ETHERNET=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_LIBERTAS_THINFIRM=m
++CONFIG_LIBERTAS_THINFIRM_USB=m
++CONFIG_AT76C50X_USB=m
++CONFIG_USB_ZD1201=m
++CONFIG_USB_NET_RNDIS_WLAN=m
++CONFIG_RTL8187=m
++CONFIG_MAC80211_HWSIM=m
++CONFIG_ATH_COMMON=m
++CONFIG_ATH9K=m
++CONFIG_ATH9K_HTC=m
++CONFIG_CARL9170=m
++CONFIG_B43=m
++CONFIG_B43LEGACY=m
++CONFIG_HOSTAP=m
++CONFIG_IWM=m
++CONFIG_LIBERTAS=m
++CONFIG_LIBERTAS_USB=m
++CONFIG_LIBERTAS_SDIO=m
++CONFIG_P54_COMMON=m
++CONFIG_P54_USB=m
++CONFIG_RT2X00=m
++CONFIG_RT2500USB=m
++CONFIG_RT73USB=m
++CONFIG_RT2800USB=m
++CONFIG_RT2800USB_RT53XX=y
++CONFIG_RTL8192CU=m
++CONFIG_WL1251=m
++CONFIG_WL12XX_MENU=m
++CONFIG_ZD1211RW=m
++CONFIG_MWIFIEX=m
++CONFIG_MWIFIEX_SDIO=m
++CONFIG_WIMAX_I2400M_USB=m
++CONFIG_USB_CATC=m
++CONFIG_USB_KAWETH=m
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++CONFIG_USB_USBNET=y
++CONFIG_USB_NET_AX8817X=m
++CONFIG_USB_NET_CDCETHER=m
++CONFIG_USB_NET_CDC_EEM=m
++CONFIG_USB_NET_DM9601=m
++CONFIG_USB_NET_SMSC75XX=m
++CONFIG_USB_NET_SMSC95XX=y
++CONFIG_USB_NET_GL620A=m
++CONFIG_USB_NET_NET1080=m
++CONFIG_USB_NET_PLUSB=m
++CONFIG_USB_NET_MCS7830=m
++CONFIG_USB_NET_CDC_SUBSET=m
++CONFIG_USB_ALI_M5632=y
++CONFIG_USB_AN2720=y
++CONFIG_USB_KC2190=y
++# CONFIG_USB_NET_ZAURUS is not set
++CONFIG_USB_NET_CX82310_ETH=m
++CONFIG_USB_NET_KALMIA=m
++CONFIG_USB_NET_INT51X1=m
++CONFIG_USB_IPHETH=m
++CONFIG_USB_SIERRA_NET=m
++CONFIG_USB_VL600=m
++CONFIG_PPP=m
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_SLIP=m
++CONFIG_SLIP_COMPRESSED=y
++CONFIG_NETCONSOLE=m
++CONFIG_INPUT_POLLDEV=m
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_JOYDEV=m
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_AD714X=m
++CONFIG_INPUT_ATI_REMOTE=m
++CONFIG_INPUT_ATI_REMOTE2=m
++CONFIG_INPUT_KEYSPAN_REMOTE=m
++CONFIG_INPUT_POWERMATE=m
++CONFIG_INPUT_YEALINK=m
++CONFIG_INPUT_CM109=m
++CONFIG_INPUT_UINPUT=m
++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
++CONFIG_INPUT_ADXL34X=m
++CONFIG_INPUT_CMA3000=m
++CONFIG_SERIO=m
++CONFIG_SERIO_RAW=m
++CONFIG_GAMEPORT=m
++CONFIG_GAMEPORT_NS558=m
++CONFIG_GAMEPORT_L4=m
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_AMBA_PL011=y
++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_RAW_DRIVER=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BCM2708_WDT=m
++# CONFIG_MFD_SUPPORT is not set
++CONFIG_FB=y
++CONFIG_FB_BCM2708=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=m
++CONFIG_SND_SEQUENCER=m
++CONFIG_SND_SEQ_DUMMY=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SEQUENCER_OSS=y
++CONFIG_SND_HRTIMER=m
++CONFIG_SND_DUMMY=m
++CONFIG_SND_ALOOP=m
++CONFIG_SND_VIRMIDI=m
++CONFIG_SND_MTPAV=m
++CONFIG_SND_SERIAL_U16550=m
++CONFIG_SND_MPU401=m
++CONFIG_SND_BCM2835=m
++CONFIG_SND_USB_AUDIO=m
++CONFIG_SND_USB_UA101=m
++CONFIG_SND_USB_CAIAQ=m
++CONFIG_SND_USB_6FIRE=m
++CONFIG_SOUND_PRIME=m
++CONFIG_HID_PID=y
++CONFIG_USB_HIDDEV=y
++CONFIG_HID_A4TECH=m
++CONFIG_HID_ACRUX=m
++CONFIG_HID_APPLE=m
++CONFIG_HID_BELKIN=m
++CONFIG_HID_CHERRY=m
++CONFIG_HID_CHICONY=m
++CONFIG_HID_CYPRESS=m
++CONFIG_HID_DRAGONRISE=m
++CONFIG_HID_EMS_FF=m
++CONFIG_HID_ELECOM=m
++CONFIG_HID_EZKEY=m
++CONFIG_HID_HOLTEK=m
++CONFIG_HID_KEYTOUCH=m
++CONFIG_HID_KYE=m
++CONFIG_HID_UCLOGIC=m
++CONFIG_HID_WALTOP=m
++CONFIG_HID_GYRATION=m
++CONFIG_HID_TWINHAN=m
++CONFIG_HID_KENSINGTON=m
++CONFIG_HID_LCPOWER=m
++CONFIG_HID_LOGITECH=m
++CONFIG_HID_MAGICMOUSE=m
++CONFIG_HID_MICROSOFT=m
++CONFIG_HID_MONTEREY=m
++CONFIG_HID_MULTITOUCH=m
++CONFIG_HID_NTRIG=m
++CONFIG_HID_ORTEK=m
++CONFIG_HID_PANTHERLORD=m
++CONFIG_HID_PETALYNX=m
++CONFIG_HID_PICOLCD=m
++CONFIG_HID_QUANTA=m
++CONFIG_HID_ROCCAT=m
++CONFIG_HID_SAMSUNG=m
++CONFIG_HID_SONY=m
++CONFIG_HID_SPEEDLINK=m
++CONFIG_HID_SUNPLUS=m
++CONFIG_HID_GREENASIA=m
++CONFIG_HID_SMARTJOYPLUS=m
++CONFIG_HID_TOPSEED=m
++CONFIG_HID_THRUSTMASTER=m
++CONFIG_HID_WACOM=m
++CONFIG_HID_WIIMOTE=m
++CONFIG_HID_ZEROPLUS=m
++CONFIG_HID_ZYDACRON=m
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++CONFIG_USB_MON=m
++CONFIG_USB_DWCOTG=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_REALTEK=m
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++CONFIG_USB_STORAGE_ISD200=m
++CONFIG_USB_STORAGE_USBAT=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_STORAGE_ALAUDA=m
++CONFIG_USB_STORAGE_ONETOUCH=m
++CONFIG_USB_STORAGE_KARMA=m
++CONFIG_USB_STORAGE_CYPRESS_ATACB=m
++CONFIG_USB_STORAGE_ENE_UB6250=m
++CONFIG_USB_UAS=m
++CONFIG_USB_LIBUSUAL=y
++CONFIG_USB_MDC800=m
++CONFIG_USB_MICROTEK=m
++CONFIG_USB_SERIAL=m
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_CH341=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++CONFIG_USB_SERIAL_CP210X=m
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++CONFIG_USB_SERIAL_IUU=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++CONFIG_USB_SERIAL_MOTOROLA=m
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_OTI6858=m
++CONFIG_USB_SERIAL_QCAUX=m
++CONFIG_USB_SERIAL_QUALCOMM=m
++CONFIG_USB_SERIAL_SPCP8X5=m
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SIEMENS_MPI=m
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++CONFIG_USB_SERIAL_SYMBOL=m
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_SERIAL_OPTICON=m
++CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
++CONFIG_USB_SERIAL_ZIO=m
++CONFIG_USB_SERIAL_SSU100=m
++CONFIG_USB_SERIAL_DEBUG=m
++CONFIG_USB_EMI62=m
++CONFIG_USB_EMI26=m
++CONFIG_USB_ADUTUX=m
++CONFIG_USB_SEVSEG=m
++CONFIG_USB_RIO500=m
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_LED=m
++CONFIG_USB_CYPRESS_CY7C63=m
++CONFIG_USB_CYTHERM=m
++CONFIG_USB_IDMOUSE=m
++CONFIG_USB_FTDI_ELAN=m
++CONFIG_USB_APPLEDISPLAY=m
++CONFIG_USB_LD=m
++CONFIG_USB_TRANCEVIBRATOR=m
++CONFIG_USB_IOWARRIOR=m
++CONFIG_USB_TEST=m
++CONFIG_USB_ISIGHTFW=m
++CONFIG_USB_YUREX=m
++CONFIG_MMC=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_PLTFM=y
++CONFIG_MMC_SDHCI_BCM2708=y
++CONFIG_MMC_SDHCI_BCM2708_DMA=y
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
++CONFIG_UIO=m
++CONFIG_UIO_PDRV=m
++CONFIG_UIO_PDRV_GENIRQ=m
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_REISERFS_FS=m
++CONFIG_REISERFS_FS_XATTR=y
++CONFIG_REISERFS_FS_POSIX_ACL=y
++CONFIG_REISERFS_FS_SECURITY=y
++CONFIG_JFS_FS=m
++CONFIG_JFS_POSIX_ACL=y
++CONFIG_JFS_SECURITY=y
++CONFIG_XFS_FS=m
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_XFS_RT=y
++CONFIG_GFS2_FS=m
++CONFIG_OCFS2_FS=m
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_NILFS2_FS=m
++CONFIG_AUTOFS4_FS=y
++CONFIG_FUSE_FS=m
++CONFIG_CUSE=m
++CONFIG_FSCACHE=y
++CONFIG_CACHEFILES=y
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_NTFS_FS=m
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_CONFIGFS_FS=y
++CONFIG_SQUASHFS=m
++CONFIG_SQUASHFS_XATTR=y
++CONFIG_SQUASHFS_LZO=y
++CONFIG_SQUASHFS_XZ=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_CIFS=m
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_9P_FS=m
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_MAC_PARTITION=y
++CONFIG_EFI_PARTITION=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++# CONFIG_SCHED_DEBUG is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_FTRACE is not set
++# CONFIG_ARM_UNWIND is not set
++CONFIG_CRYPTO_AUTHENC=m
++CONFIG_CRYPTO_SEQIV=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_DES=y
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_LIBCRC32C=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_BCM2708=m
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++CONFIG_SPI_BCM2708=m
++
+diff -urN linux-3.10/arch/arm/configs/bcmrpi_defconfig linux-rpi-3.10.y/arch/arm/configs/bcmrpi_defconfig
+--- linux-3.10/arch/arm/configs/bcmrpi_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/configs/bcmrpi_defconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,743 @@
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_FHANDLE=y
++CONFIG_AUDIT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_CGROUP_FREEZER=y
++CONFIG_CGROUP_DEVICE=y
++CONFIG_CGROUP_CPUACCT=y
++CONFIG_RESOURCE_COUNTERS=y
++CONFIG_BLK_CGROUP=y
++CONFIG_NAMESPACES=y
++CONFIG_SCHED_AUTOGROUP=y
++CONFIG_EMBEDDED=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_BLK_DEV_THROTTLING=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_MAC_PARTITION=y
++CONFIG_CFQ_GROUP_IOSCHED=y
++CONFIG_ARCH_BCM2708=y
++CONFIG_AEABI=y
++CONFIG_SECCOMP=y
++CONFIG_CC_STACKPROTECTOR=y
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
++CONFIG_KEXEC=y
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_STAT=m
++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
++CONFIG_CPU_IDLE=y
++CONFIG_VFP=y
++CONFIG_BINFMT_MISC=m
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_NET_KEY=m
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++CONFIG_INET_LRO=m
++CONFIG_INET_DIAG=m
++CONFIG_IPV6_PRIVACY=y
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_NETFILTER=y
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CONNTRACK_ZONES=y
++CONFIG_NF_CONNTRACK_EVENTS=y
++CONFIG_NF_CONNTRACK_TIMESTAMP=y
++CONFIG_NF_CT_PROTO_DCCP=m
++CONFIG_NF_CT_PROTO_SCTP=m
++CONFIG_NF_CT_PROTO_UDPLITE=m
++CONFIG_NF_CONNTRACK_AMANDA=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_SNMP=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NF_CT_NETLINK=m
++CONFIG_NETFILTER_TPROXY=m
++CONFIG_NETFILTER_XT_SET=m
++CONFIG_NETFILTER_XT_TARGET_AUDIT=m
++CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++CONFIG_NETFILTER_XT_TARGET_DSCP=m
++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
++CONFIG_NETFILTER_XT_TARGET_TEE=m
++CONFIG_NETFILTER_XT_TARGET_TPROXY=m
++CONFIG_NETFILTER_XT_TARGET_TRACE=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
++CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_CPU=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_OSF=m
++CONFIG_NETFILTER_XT_MATCH_OWNER=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_RATEEST=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_RECENT=m
++CONFIG_NETFILTER_XT_MATCH_SCTP=m
++CONFIG_NETFILTER_XT_MATCH_SOCKET=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++CONFIG_NETFILTER_XT_MATCH_U32=m
++CONFIG_IP_SET=m
++CONFIG_IP_SET_BITMAP_IP=m
++CONFIG_IP_SET_BITMAP_IPMAC=m
++CONFIG_IP_SET_BITMAP_PORT=m
++CONFIG_IP_SET_HASH_IP=m
++CONFIG_IP_SET_HASH_IPPORT=m
++CONFIG_IP_SET_HASH_IPPORTIP=m
++CONFIG_IP_SET_HASH_IPPORTNET=m
++CONFIG_IP_SET_HASH_NET=m
++CONFIG_IP_SET_HASH_NETPORT=m
++CONFIG_IP_SET_HASH_NETIFACE=m
++CONFIG_IP_SET_LIST_SET=m
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++CONFIG_BRIDGE_NF_EBTABLES=m
++CONFIG_BRIDGE_EBT_BROUTE=m
++CONFIG_BRIDGE_EBT_T_FILTER=m
++CONFIG_BRIDGE_EBT_T_NAT=m
++CONFIG_BRIDGE_EBT_802_3=m
++CONFIG_BRIDGE_EBT_AMONG=m
++CONFIG_BRIDGE_EBT_ARP=m
++CONFIG_BRIDGE_EBT_IP=m
++CONFIG_BRIDGE_EBT_IP6=m
++CONFIG_BRIDGE_EBT_LIMIT=m
++CONFIG_BRIDGE_EBT_MARK=m
++CONFIG_BRIDGE_EBT_PKTTYPE=m
++CONFIG_BRIDGE_EBT_STP=m
++CONFIG_BRIDGE_EBT_VLAN=m
++CONFIG_BRIDGE_EBT_ARPREPLY=m
++CONFIG_BRIDGE_EBT_DNAT=m
++CONFIG_BRIDGE_EBT_MARK_T=m
++CONFIG_BRIDGE_EBT_REDIRECT=m
++CONFIG_BRIDGE_EBT_SNAT=m
++CONFIG_BRIDGE_EBT_LOG=m
++CONFIG_BRIDGE_EBT_ULOG=m
++CONFIG_BRIDGE_EBT_NFLOG=m
++CONFIG_L2TP=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++CONFIG_VLAN_8021Q_GVRP=y
++CONFIG_NET_SCHED=y
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_MULTIQ=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFB=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_DRR=m
++CONFIG_NET_SCH_MQPRIO=m
++CONFIG_NET_SCH_CHOKE=m
++CONFIG_NET_SCH_QFQ=m
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_FLOW=m
++CONFIG_NET_CLS_CGROUP=m
++CONFIG_NET_EMATCH=y
++CONFIG_NET_EMATCH_CMP=m
++CONFIG_NET_EMATCH_NBYTE=m
++CONFIG_NET_EMATCH_U32=m
++CONFIG_NET_EMATCH_META=m
++CONFIG_NET_EMATCH_TEXT=m
++CONFIG_NET_CLS_ACT=y
++CONFIG_NET_ACT_POLICE=m
++CONFIG_NET_ACT_GACT=m
++CONFIG_GACT_PROB=y
++CONFIG_NET_ACT_MIRRED=m
++CONFIG_NET_ACT_IPT=m
++CONFIG_NET_ACT_NAT=m
++CONFIG_NET_ACT_PEDIT=m
++CONFIG_NET_ACT_SIMP=m
++CONFIG_NET_ACT_SKBEDIT=m
++CONFIG_NET_ACT_CSUM=m
++CONFIG_NET_PKTGEN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_ULTRA=y
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRDA_FAST_RR=y
++CONFIG_IRTTY_SIR=m
++CONFIG_KINGSUN_DONGLE=m
++CONFIG_KSDAZZLE_DONGLE=m
++CONFIG_KS959_DONGLE=m
++CONFIG_USB_IRDA=m
++CONFIG_SIGMATEL_FIR=m
++CONFIG_MCS_FIR=m
++CONFIG_BT=m
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++CONFIG_BT_HCIBTUSB=m
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBPA10X=m
++CONFIG_BT_HCIBFUSB=m
++CONFIG_BT_HCIVHCI=m
++CONFIG_BT_MRVL=m
++CONFIG_BT_MRVL_SDIO=m
++CONFIG_BT_ATH3K=m
++CONFIG_CFG80211=m
++CONFIG_MAC80211=m
++CONFIG_MAC80211_RC_PID=y
++CONFIG_MAC80211_MESH=y
++CONFIG_WIMAX=m
++CONFIG_NET_9P=m
++CONFIG_NFC=m
++CONFIG_NFC_PN533=m
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_DRBD=m
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_CDROM_PKTCDVD=m
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=m
++CONFIG_BLK_DEV_SR=m
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_MD=y
++CONFIG_NETDEVICES=y
++CONFIG_NETCONSOLE=m
++CONFIG_TUN=m
++CONFIG_MDIO_BITBANG=m
++CONFIG_PPP=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_SLIP=m
++CONFIG_SLIP_COMPRESSED=y
++CONFIG_USB_CATC=m
++CONFIG_USB_KAWETH=m
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++CONFIG_USB_USBNET=y
++CONFIG_USB_NET_AX8817X=m
++CONFIG_USB_NET_CDCETHER=m
++CONFIG_USB_NET_CDC_EEM=m
++CONFIG_USB_NET_DM9601=m
++CONFIG_USB_NET_SMSC75XX=m
++CONFIG_USB_NET_SMSC95XX=y
++CONFIG_USB_NET_GL620A=m
++CONFIG_USB_NET_NET1080=m
++CONFIG_USB_NET_PLUSB=m
++CONFIG_USB_NET_MCS7830=m
++CONFIG_USB_NET_CDC_SUBSET=m
++CONFIG_USB_ALI_M5632=y
++CONFIG_USB_AN2720=y
++CONFIG_USB_KC2190=y
++# CONFIG_USB_NET_ZAURUS is not set
++CONFIG_USB_NET_CX82310_ETH=m
++CONFIG_USB_NET_KALMIA=m
++CONFIG_USB_NET_INT51X1=m
++CONFIG_USB_IPHETH=m
++CONFIG_USB_SIERRA_NET=m
++CONFIG_USB_VL600=m
++CONFIG_LIBERTAS_THINFIRM=m
++CONFIG_LIBERTAS_THINFIRM_USB=m
++CONFIG_AT76C50X_USB=m
++CONFIG_USB_ZD1201=m
++CONFIG_USB_NET_RNDIS_WLAN=m
++CONFIG_RTL8187=m
++CONFIG_MAC80211_HWSIM=m
++CONFIG_B43=m
++CONFIG_B43LEGACY=m
++CONFIG_HOSTAP=m
++CONFIG_LIBERTAS=m
++CONFIG_LIBERTAS_USB=m
++CONFIG_LIBERTAS_SDIO=m
++CONFIG_P54_COMMON=m
++CONFIG_P54_USB=m
++CONFIG_RT2X00=m
++CONFIG_RT2500USB=m
++CONFIG_RT73USB=m
++CONFIG_RT2800USB=m
++CONFIG_RT2800USB_RT53XX=y
++CONFIG_RT2800USB_UNKNOWN=y
++CONFIG_ZD1211RW=m
++CONFIG_MWIFIEX=m
++CONFIG_MWIFIEX_SDIO=m
++CONFIG_WIMAX_I2400M_USB=m
++CONFIG_INPUT_POLLDEV=m
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_JOYDEV=m
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_AD714X=m
++CONFIG_INPUT_ATI_REMOTE2=m
++CONFIG_INPUT_KEYSPAN_REMOTE=m
++CONFIG_INPUT_POWERMATE=m
++CONFIG_INPUT_YEALINK=m
++CONFIG_INPUT_CM109=m
++CONFIG_INPUT_UINPUT=m
++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
++CONFIG_INPUT_ADXL34X=m
++CONFIG_INPUT_CMA3000=m
++CONFIG_SERIO=m
++CONFIG_SERIO_RAW=m
++CONFIG_GAMEPORT=m
++CONFIG_GAMEPORT_NS558=m
++CONFIG_GAMEPORT_L4=m
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_AMBA_PL011=y
++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_RAW_DRIVER=y
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BCM2708=m
++CONFIG_SPI=y
++CONFIG_SPI_BCM2708=m
++CONFIG_SPI_SPIDEV=m
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++CONFIG_THERMAL_BCM2835=y
++CONFIG_WATCHDOG=y
++CONFIG_BCM2708_WDT=m
++CONFIG_MEDIA_SUPPORT=m
++CONFIG_FB=y
++CONFIG_FB_BCM2708=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=m
++CONFIG_SND_SEQUENCER=m
++CONFIG_SND_SEQ_DUMMY=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SEQUENCER_OSS=y
++CONFIG_SND_HRTIMER=m
++CONFIG_SND_DUMMY=m
++CONFIG_SND_ALOOP=m
++CONFIG_SND_VIRMIDI=m
++CONFIG_SND_MTPAV=m
++CONFIG_SND_SERIAL_U16550=m
++CONFIG_SND_MPU401=m
++CONFIG_SND_BCM2835=m
++CONFIG_SND_USB_AUDIO=m
++CONFIG_SND_USB_UA101=m
++CONFIG_SND_USB_CAIAQ=m
++CONFIG_SND_USB_6FIRE=m
++CONFIG_SOUND_PRIME=m
++CONFIG_HID_A4TECH=m
++CONFIG_HID_ACRUX=m
++CONFIG_HID_APPLE=m
++CONFIG_HID_BELKIN=m
++CONFIG_HID_CHERRY=m
++CONFIG_HID_CHICONY=m
++CONFIG_HID_CYPRESS=m
++CONFIG_HID_DRAGONRISE=m
++CONFIG_HID_EMS_FF=m
++CONFIG_HID_ELECOM=m
++CONFIG_HID_EZKEY=m
++CONFIG_HID_HOLTEK=m
++CONFIG_HID_KEYTOUCH=m
++CONFIG_HID_KYE=m
++CONFIG_HID_UCLOGIC=m
++CONFIG_HID_WALTOP=m
++CONFIG_HID_GYRATION=m
++CONFIG_HID_TWINHAN=m
++CONFIG_HID_KENSINGTON=m
++CONFIG_HID_LCPOWER=m
++CONFIG_HID_LOGITECH=m
++CONFIG_HID_MAGICMOUSE=m
++CONFIG_HID_MICROSOFT=m
++CONFIG_HID_MONTEREY=m
++CONFIG_HID_MULTITOUCH=m
++CONFIG_HID_NTRIG=m
++CONFIG_HID_ORTEK=m
++CONFIG_HID_PANTHERLORD=m
++CONFIG_HID_PETALYNX=m
++CONFIG_HID_PICOLCD=m
++CONFIG_HID_ROCCAT=m
++CONFIG_HID_SAMSUNG=m
++CONFIG_HID_SONY=m
++CONFIG_HID_SPEEDLINK=m
++CONFIG_HID_SUNPLUS=m
++CONFIG_HID_GREENASIA=m
++CONFIG_HID_SMARTJOYPLUS=m
++CONFIG_HID_TOPSEED=m
++CONFIG_HID_THRUSTMASTER=m
++CONFIG_HID_ZEROPLUS=m
++CONFIG_HID_ZYDACRON=m
++CONFIG_HID_PID=y
++CONFIG_USB_HIDDEV=y
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++CONFIG_USB_MON=m
++CONFIG_USB_DWCOTG=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_REALTEK=m
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++CONFIG_USB_STORAGE_ISD200=m
++CONFIG_USB_STORAGE_USBAT=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_STORAGE_ALAUDA=m
++CONFIG_USB_STORAGE_ONETOUCH=m
++CONFIG_USB_STORAGE_KARMA=m
++CONFIG_USB_STORAGE_CYPRESS_ATACB=m
++CONFIG_USB_STORAGE_ENE_UB6250=m
++CONFIG_USB_MDC800=m
++CONFIG_USB_MICROTEK=m
++CONFIG_USB_SERIAL=m
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_CH341=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++CONFIG_USB_SERIAL_CP210X=m
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++CONFIG_USB_SERIAL_IUU=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++CONFIG_USB_SERIAL_MOTOROLA=m
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_OTI6858=m
++CONFIG_USB_SERIAL_QCAUX=m
++CONFIG_USB_SERIAL_QUALCOMM=m
++CONFIG_USB_SERIAL_SPCP8X5=m
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SIEMENS_MPI=m
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++CONFIG_USB_SERIAL_SYMBOL=m
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_SERIAL_OPTICON=m
++CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
++CONFIG_USB_SERIAL_ZIO=m
++CONFIG_USB_SERIAL_SSU100=m
++CONFIG_USB_SERIAL_DEBUG=m
++CONFIG_USB_EMI62=m
++CONFIG_USB_EMI26=m
++CONFIG_USB_ADUTUX=m
++CONFIG_USB_SEVSEG=m
++CONFIG_USB_RIO500=m
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_LED=m
++CONFIG_USB_CYPRESS_CY7C63=m
++CONFIG_USB_CYTHERM=m
++CONFIG_USB_IDMOUSE=m
++CONFIG_USB_FTDI_ELAN=m
++CONFIG_USB_APPLEDISPLAY=m
++CONFIG_USB_LD=m
++CONFIG_USB_TRANCEVIBRATOR=m
++CONFIG_USB_IOWARRIOR=m
++CONFIG_USB_TEST=m
++CONFIG_USB_ISIGHTFW=m
++CONFIG_USB_YUREX=m
++CONFIG_MMC=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_PLTFM=y
++CONFIG_MMC_SDHCI_BCM2708=y
++CONFIG_MMC_SDHCI_BCM2708_DMA=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_DS1307=m
++CONFIG_RTC_DRV_DS1374=m
++CONFIG_RTC_DRV_DS1672=m
++CONFIG_RTC_DRV_DS3232=m
++CONFIG_RTC_DRV_MAX6900=m
++CONFIG_RTC_DRV_RS5C372=m
++CONFIG_RTC_DRV_ISL1208=m
++CONFIG_RTC_DRV_ISL12022=m
++CONFIG_RTC_DRV_X1205=m
++CONFIG_RTC_DRV_PCF8563=m
++CONFIG_RTC_DRV_PCF8583=m
++CONFIG_RTC_DRV_M41T80=m
++CONFIG_RTC_DRV_BQ32K=m
++CONFIG_RTC_DRV_S35390A=m
++CONFIG_RTC_DRV_FM3130=m
++CONFIG_RTC_DRV_RX8581=m
++CONFIG_RTC_DRV_RX8025=m
++CONFIG_RTC_DRV_EM3027=m
++CONFIG_RTC_DRV_RV3029C2=m
++CONFIG_RTC_DRV_M41T93=m
++CONFIG_RTC_DRV_M41T94=m
++CONFIG_RTC_DRV_DS1305=m
++CONFIG_RTC_DRV_DS1390=m
++CONFIG_RTC_DRV_MAX6902=m
++CONFIG_RTC_DRV_R9701=m
++CONFIG_RTC_DRV_RS5C348=m
++CONFIG_RTC_DRV_DS3234=m
++CONFIG_RTC_DRV_PCF2123=m
++CONFIG_UIO=m
++CONFIG_UIO_PDRV=m
++CONFIG_UIO_PDRV_GENIRQ=m
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_REISERFS_FS=m
++CONFIG_REISERFS_FS_XATTR=y
++CONFIG_REISERFS_FS_POSIX_ACL=y
++CONFIG_REISERFS_FS_SECURITY=y
++CONFIG_JFS_FS=m
++CONFIG_JFS_POSIX_ACL=y
++CONFIG_JFS_SECURITY=y
++CONFIG_JFS_STATISTICS=y
++CONFIG_XFS_FS=m
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_XFS_RT=y
++CONFIG_GFS2_FS=m
++CONFIG_OCFS2_FS=m
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_NILFS2_FS=m
++CONFIG_FANOTIFY=y
++CONFIG_AUTOFS4_FS=y
++CONFIG_FUSE_FS=m
++CONFIG_CUSE=m
++CONFIG_FSCACHE=y
++CONFIG_FSCACHE_STATS=y
++CONFIG_FSCACHE_HISTOGRAM=y
++CONFIG_CACHEFILES=y
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_NTFS_FS=m
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_CONFIGFS_FS=y
++CONFIG_SQUASHFS=m
++CONFIG_SQUASHFS_XATTR=y
++CONFIG_SQUASHFS_LZO=y
++CONFIG_SQUASHFS_XZ=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++CONFIG_CIFS=m
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_9P_FS=m
++CONFIG_9P_FS_POSIX_ACL=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++CONFIG_PRINTK_TIME=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_TIMER_STATS=y
++CONFIG_DEBUG_STACK_USAGE=y
++CONFIG_DEBUG_INFO=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_BOOT_PRINTK_DELAY=y
++CONFIG_LATENCYTOP=y
++CONFIG_IRQSOFF_TRACER=y
++CONFIG_SCHED_TRACER=y
++CONFIG_STACK_TRACER=y
++CONFIG_BLK_DEV_IO_TRACE=y
++CONFIG_FUNCTION_PROFILER=y
++CONFIG_KGDB=y
++CONFIG_KGDB_KDB=y
++CONFIG_KDB_KEYBOARD=y
++CONFIG_STRICT_DEVMEM=y
++CONFIG_CRYPTO_SEQIV=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_LIBCRC32C=y
+diff -urN linux-3.10/arch/arm/configs/bcmrpi_emergency_defconfig linux-rpi-3.10.y/arch/arm/configs/bcmrpi_emergency_defconfig
+--- linux-3.10/arch/arm/configs/bcmrpi_emergency_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/configs/bcmrpi_emergency_defconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,532 @@
++CONFIG_EXPERIMENTAL=y
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_FHANDLE=y
++CONFIG_AUDIT=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE="../target_fs"
++CONFIG_CGROUP_FREEZER=y
++CONFIG_CGROUP_DEVICE=y
++CONFIG_CGROUP_CPUACCT=y
++CONFIG_RESOURCE_COUNTERS=y
++CONFIG_BLK_CGROUP=y
++CONFIG_NAMESPACES=y
++CONFIG_SCHED_AUTOGROUP=y
++CONFIG_EMBEDDED=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_BLK_DEV_THROTTLING=y
++CONFIG_CFQ_GROUP_IOSCHED=y
++CONFIG_ARCH_BCM2708=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_AEABI=y
++CONFIG_SECCOMP=y
++CONFIG_CC_STACKPROTECTOR=y
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
++CONFIG_KEXEC=y
++CONFIG_CPU_IDLE=y
++CONFIG_VFP=y
++CONFIG_BINFMT_MISC=m
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_NET_KEY=m
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_NET_PKTGEN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_ULTRA=y
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRDA_FAST_RR=y
++CONFIG_IRTTY_SIR=m
++CONFIG_KINGSUN_DONGLE=m
++CONFIG_KSDAZZLE_DONGLE=m
++CONFIG_KS959_DONGLE=m
++CONFIG_USB_IRDA=m
++CONFIG_SIGMATEL_FIR=m
++CONFIG_MCS_FIR=m
++CONFIG_BT=m
++CONFIG_BT_L2CAP=y
++CONFIG_BT_SCO=y
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++CONFIG_BT_HCIBTUSB=m
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBPA10X=m
++CONFIG_BT_HCIBFUSB=m
++CONFIG_BT_HCIVHCI=m
++CONFIG_BT_MRVL=m
++CONFIG_BT_MRVL_SDIO=m
++CONFIG_BT_ATH3K=m
++CONFIG_CFG80211=m
++CONFIG_MAC80211=m
++CONFIG_MAC80211_RC_PID=y
++CONFIG_MAC80211_MESH=y
++CONFIG_WIMAX=m
++CONFIG_NET_9P=m
++CONFIG_NFC=m
++CONFIG_NFC_PN533=m
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_CDROM_PKTCDVD=m
++CONFIG_MISC_DEVICES=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_MD=y
++CONFIG_NETDEVICES=y
++CONFIG_TUN=m
++CONFIG_PHYLIB=m
++CONFIG_MDIO_BITBANG=m
++CONFIG_NET_ETHERNET=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_LIBERTAS_THINFIRM=m
++CONFIG_LIBERTAS_THINFIRM_USB=m
++CONFIG_AT76C50X_USB=m
++CONFIG_USB_ZD1201=m
++CONFIG_USB_NET_RNDIS_WLAN=m
++CONFIG_RTL8187=m
++CONFIG_MAC80211_HWSIM=m
++CONFIG_ATH_COMMON=m
++CONFIG_ATH9K=m
++CONFIG_ATH9K_HTC=m
++CONFIG_CARL9170=m
++CONFIG_B43=m
++CONFIG_B43LEGACY=m
++CONFIG_HOSTAP=m
++CONFIG_IWM=m
++CONFIG_LIBERTAS=m
++CONFIG_LIBERTAS_USB=m
++CONFIG_LIBERTAS_SDIO=m
++CONFIG_P54_COMMON=m
++CONFIG_P54_USB=m
++CONFIG_RT2X00=m
++CONFIG_RT2500USB=m
++CONFIG_RT73USB=m
++CONFIG_RT2800USB=m
++CONFIG_RT2800USB_RT53XX=y
++CONFIG_RTL8192CU=m
++CONFIG_WL1251=m
++CONFIG_WL12XX_MENU=m
++CONFIG_ZD1211RW=m
++CONFIG_MWIFIEX=m
++CONFIG_MWIFIEX_SDIO=m
++CONFIG_WIMAX_I2400M_USB=m
++CONFIG_USB_CATC=m
++CONFIG_USB_KAWETH=m
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++CONFIG_USB_USBNET=y
++CONFIG_USB_NET_AX8817X=m
++CONFIG_USB_NET_CDCETHER=m
++CONFIG_USB_NET_CDC_EEM=m
++CONFIG_USB_NET_DM9601=m
++CONFIG_USB_NET_SMSC75XX=m
++CONFIG_USB_NET_SMSC95XX=y
++CONFIG_USB_NET_GL620A=m
++CONFIG_USB_NET_NET1080=m
++CONFIG_USB_NET_PLUSB=m
++CONFIG_USB_NET_MCS7830=m
++CONFIG_USB_NET_CDC_SUBSET=m
++CONFIG_USB_ALI_M5632=y
++CONFIG_USB_AN2720=y
++CONFIG_USB_KC2190=y
++# CONFIG_USB_NET_ZAURUS is not set
++CONFIG_USB_NET_CX82310_ETH=m
++CONFIG_USB_NET_KALMIA=m
++CONFIG_USB_NET_INT51X1=m
++CONFIG_USB_IPHETH=m
++CONFIG_USB_SIERRA_NET=m
++CONFIG_USB_VL600=m
++CONFIG_PPP=m
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_SLIP=m
++CONFIG_SLIP_COMPRESSED=y
++CONFIG_NETCONSOLE=m
++CONFIG_INPUT_POLLDEV=m
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_JOYDEV=m
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_AD714X=m
++CONFIG_INPUT_ATI_REMOTE=m
++CONFIG_INPUT_ATI_REMOTE2=m
++CONFIG_INPUT_KEYSPAN_REMOTE=m
++CONFIG_INPUT_POWERMATE=m
++CONFIG_INPUT_YEALINK=m
++CONFIG_INPUT_CM109=m
++CONFIG_INPUT_UINPUT=m
++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
++CONFIG_INPUT_ADXL34X=m
++CONFIG_INPUT_CMA3000=m
++CONFIG_SERIO=m
++CONFIG_SERIO_RAW=m
++CONFIG_GAMEPORT=m
++CONFIG_GAMEPORT_NS558=m
++CONFIG_GAMEPORT_L4=m
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_AMBA_PL011=y
++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_RAW_DRIVER=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BCM2708_WDT=m
++# CONFIG_MFD_SUPPORT is not set
++CONFIG_FB=y
++CONFIG_FB_BCM2708=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=m
++CONFIG_SND_SEQUENCER=m
++CONFIG_SND_SEQ_DUMMY=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SEQUENCER_OSS=y
++CONFIG_SND_HRTIMER=m
++CONFIG_SND_DUMMY=m
++CONFIG_SND_ALOOP=m
++CONFIG_SND_VIRMIDI=m
++CONFIG_SND_MTPAV=m
++CONFIG_SND_SERIAL_U16550=m
++CONFIG_SND_MPU401=m
++CONFIG_SND_BCM2835=m
++CONFIG_SND_USB_AUDIO=m
++CONFIG_SND_USB_UA101=m
++CONFIG_SND_USB_CAIAQ=m
++CONFIG_SND_USB_6FIRE=m
++CONFIG_SOUND_PRIME=m
++CONFIG_HID_PID=y
++CONFIG_USB_HIDDEV=y
++CONFIG_HID_A4TECH=m
++CONFIG_HID_ACRUX=m
++CONFIG_HID_APPLE=m
++CONFIG_HID_BELKIN=m
++CONFIG_HID_CHERRY=m
++CONFIG_HID_CHICONY=m
++CONFIG_HID_CYPRESS=m
++CONFIG_HID_DRAGONRISE=m
++CONFIG_HID_EMS_FF=m
++CONFIG_HID_ELECOM=m
++CONFIG_HID_EZKEY=m
++CONFIG_HID_HOLTEK=m
++CONFIG_HID_KEYTOUCH=m
++CONFIG_HID_KYE=m
++CONFIG_HID_UCLOGIC=m
++CONFIG_HID_WALTOP=m
++CONFIG_HID_GYRATION=m
++CONFIG_HID_TWINHAN=m
++CONFIG_HID_KENSINGTON=m
++CONFIG_HID_LCPOWER=m
++CONFIG_HID_LOGITECH=m
++CONFIG_HID_MAGICMOUSE=m
++CONFIG_HID_MICROSOFT=m
++CONFIG_HID_MONTEREY=m
++CONFIG_HID_MULTITOUCH=m
++CONFIG_HID_NTRIG=m
++CONFIG_HID_ORTEK=m
++CONFIG_HID_PANTHERLORD=m
++CONFIG_HID_PETALYNX=m
++CONFIG_HID_PICOLCD=m
++CONFIG_HID_QUANTA=m
++CONFIG_HID_ROCCAT=m
++CONFIG_HID_SAMSUNG=m
++CONFIG_HID_SONY=m
++CONFIG_HID_SPEEDLINK=m
++CONFIG_HID_SUNPLUS=m
++CONFIG_HID_GREENASIA=m
++CONFIG_HID_SMARTJOYPLUS=m
++CONFIG_HID_TOPSEED=m
++CONFIG_HID_THRUSTMASTER=m
++CONFIG_HID_WACOM=m
++CONFIG_HID_WIIMOTE=m
++CONFIG_HID_ZEROPLUS=m
++CONFIG_HID_ZYDACRON=m
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++CONFIG_USB_MON=m
++CONFIG_USB_DWCOTG=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_REALTEK=m
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++CONFIG_USB_STORAGE_ISD200=m
++CONFIG_USB_STORAGE_USBAT=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_STORAGE_ALAUDA=m
++CONFIG_USB_STORAGE_ONETOUCH=m
++CONFIG_USB_STORAGE_KARMA=m
++CONFIG_USB_STORAGE_CYPRESS_ATACB=m
++CONFIG_USB_STORAGE_ENE_UB6250=m
++CONFIG_USB_UAS=y
++CONFIG_USB_LIBUSUAL=y
++CONFIG_USB_MDC800=m
++CONFIG_USB_MICROTEK=m
++CONFIG_USB_SERIAL=m
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_CH341=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++CONFIG_USB_SERIAL_CP210X=m
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++CONFIG_USB_SERIAL_IUU=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++CONFIG_USB_SERIAL_MOTOROLA=m
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_OTI6858=m
++CONFIG_USB_SERIAL_QCAUX=m
++CONFIG_USB_SERIAL_QUALCOMM=m
++CONFIG_USB_SERIAL_SPCP8X5=m
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SIEMENS_MPI=m
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++CONFIG_USB_SERIAL_SYMBOL=m
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_SERIAL_OPTICON=m
++CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
++CONFIG_USB_SERIAL_ZIO=m
++CONFIG_USB_SERIAL_SSU100=m
++CONFIG_USB_SERIAL_DEBUG=m
++CONFIG_USB_EMI62=m
++CONFIG_USB_EMI26=m
++CONFIG_USB_ADUTUX=m
++CONFIG_USB_SEVSEG=m
++CONFIG_USB_RIO500=m
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_LED=m
++CONFIG_USB_CYPRESS_CY7C63=m
++CONFIG_USB_CYTHERM=m
++CONFIG_USB_IDMOUSE=m
++CONFIG_USB_FTDI_ELAN=m
++CONFIG_USB_APPLEDISPLAY=m
++CONFIG_USB_LD=m
++CONFIG_USB_TRANCEVIBRATOR=m
++CONFIG_USB_IOWARRIOR=m
++CONFIG_USB_TEST=m
++CONFIG_USB_ISIGHTFW=m
++CONFIG_USB_YUREX=m
++CONFIG_MMC=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_PLTFM=y
++CONFIG_MMC_SDHCI_BCM2708=y
++CONFIG_MMC_SDHCI_BCM2708_DMA=y
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
++CONFIG_UIO=m
++CONFIG_UIO_PDRV=m
++CONFIG_UIO_PDRV_GENIRQ=m
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_REISERFS_FS=m
++CONFIG_REISERFS_FS_XATTR=y
++CONFIG_REISERFS_FS_POSIX_ACL=y
++CONFIG_REISERFS_FS_SECURITY=y
++CONFIG_JFS_FS=m
++CONFIG_JFS_POSIX_ACL=y
++CONFIG_JFS_SECURITY=y
++CONFIG_JFS_STATISTICS=y
++CONFIG_XFS_FS=m
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_XFS_RT=y
++CONFIG_GFS2_FS=m
++CONFIG_OCFS2_FS=m
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_NILFS2_FS=m
++CONFIG_FANOTIFY=y
++CONFIG_AUTOFS4_FS=y
++CONFIG_FUSE_FS=m
++CONFIG_CUSE=m
++CONFIG_FSCACHE=y
++CONFIG_FSCACHE_STATS=y
++CONFIG_FSCACHE_HISTOGRAM=y
++CONFIG_CACHEFILES=y
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_NTFS_FS=m
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_CONFIGFS_FS=y
++CONFIG_SQUASHFS=m
++CONFIG_SQUASHFS_XATTR=y
++CONFIG_SQUASHFS_LZO=y
++CONFIG_SQUASHFS_XZ=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_CIFS=m
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_9P_FS=m
++CONFIG_9P_FS_POSIX_ACL=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_MAC_PARTITION=y
++CONFIG_EFI_PARTITION=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++CONFIG_PRINTK_TIME=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_TIMER_STATS=y
++CONFIG_DEBUG_STACK_USAGE=y
++CONFIG_DEBUG_INFO=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_BOOT_PRINTK_DELAY=y
++CONFIG_LATENCYTOP=y
++CONFIG_SYSCTL_SYSCALL_CHECK=y
++CONFIG_IRQSOFF_TRACER=y
++CONFIG_SCHED_TRACER=y
++CONFIG_STACK_TRACER=y
++CONFIG_BLK_DEV_IO_TRACE=y
++CONFIG_FUNCTION_PROFILER=y
++CONFIG_KGDB=y
++CONFIG_KGDB_KDB=y
++CONFIG_KDB_KEYBOARD=y
++CONFIG_STRICT_DEVMEM=y
++CONFIG_CRYPTO_AUTHENC=m
++CONFIG_CRYPTO_SEQIV=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_DES=y
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_LIBCRC32C=y
+diff -urN linux-3.10/arch/arm/configs/bcmrpi_quick_defconfig linux-rpi-3.10.y/arch/arm/configs/bcmrpi_quick_defconfig
+--- linux-3.10/arch/arm/configs/bcmrpi_quick_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/configs/bcmrpi_quick_defconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,197 @@
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_LOCALVERSION="-quick"
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_EMBEDDED=y
++CONFIG_PERF_EVENTS=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_ARCH_BCM2708=y
++CONFIG_PREEMPT=y
++CONFIG_AEABI=y
++CONFIG_UACCESS_WITH_MEMCPY=y
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
++CONFIG_CPU_IDLE=y
++CONFIG_VFP=y
++CONFIG_BINFMT_MISC=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CIRRUS is not set
++# CONFIG_NET_VENDOR_FARADAY is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_NET_VENDOR_WIZNET is not set
++CONFIG_USB_USBNET=y
++# CONFIG_USB_NET_AX8817X is not set
++# CONFIG_USB_NET_CDCETHER is not set
++# CONFIG_USB_NET_CDC_NCM is not set
++CONFIG_USB_NET_SMSC95XX=y
++# CONFIG_USB_NET_NET1080 is not set
++# CONFIG_USB_NET_CDC_SUBSET is not set
++# CONFIG_USB_NET_ZAURUS is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_AMBA_PL011=y
++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
++CONFIG_TTY_PRINTK=y
++CONFIG_HW_RANDOM=y
++CONFIG_HW_RANDOM_BCM2708=y
++CONFIG_RAW_DRIVER=y
++CONFIG_THERMAL=y
++CONFIG_THERMAL_BCM2835=y
++CONFIG_WATCHDOG=y
++CONFIG_BCM2708_WDT=y
++CONFIG_REGULATOR=y
++CONFIG_REGULATOR_DEBUG=y
++CONFIG_REGULATOR_FIXED_VOLTAGE=y
++CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
++CONFIG_REGULATOR_USERSPACE_CONSUMER=y
++CONFIG_FB=y
++CONFIG_FB_BCM2708=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_BCM2835=y
++# CONFIG_SND_USB is not set
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++CONFIG_USB_DWCOTG=y
++CONFIG_MMC=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_PLTFM=y
++CONFIG_MMC_SDHCI_BCM2708=y
++CONFIG_MMC_SDHCI_BCM2708_DMA=y
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++CONFIG_LEDS_TRIGGERS=y
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_AUTOFS4_FS=y
++CONFIG_FSCACHE=y
++CONFIG_CACHEFILES=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_CONFIGFS_FS=y
++# CONFIG_MISC_FILESYSTEMS is not set
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=y
++CONFIG_NLS_CODEPAGE_775=y
++CONFIG_NLS_CODEPAGE_850=y
++CONFIG_NLS_CODEPAGE_852=y
++CONFIG_NLS_CODEPAGE_855=y
++CONFIG_NLS_CODEPAGE_857=y
++CONFIG_NLS_CODEPAGE_860=y
++CONFIG_NLS_CODEPAGE_861=y
++CONFIG_NLS_CODEPAGE_862=y
++CONFIG_NLS_CODEPAGE_863=y
++CONFIG_NLS_CODEPAGE_864=y
++CONFIG_NLS_CODEPAGE_865=y
++CONFIG_NLS_CODEPAGE_866=y
++CONFIG_NLS_CODEPAGE_869=y
++CONFIG_NLS_CODEPAGE_936=y
++CONFIG_NLS_CODEPAGE_950=y
++CONFIG_NLS_CODEPAGE_932=y
++CONFIG_NLS_CODEPAGE_949=y
++CONFIG_NLS_CODEPAGE_874=y
++CONFIG_NLS_ISO8859_8=y
++CONFIG_NLS_CODEPAGE_1250=y
++CONFIG_NLS_CODEPAGE_1251=y
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=y
++CONFIG_NLS_ISO8859_2=y
++CONFIG_NLS_ISO8859_3=y
++CONFIG_NLS_ISO8859_4=y
++CONFIG_NLS_ISO8859_5=y
++CONFIG_NLS_ISO8859_6=y
++CONFIG_NLS_ISO8859_7=y
++CONFIG_NLS_ISO8859_9=y
++CONFIG_NLS_ISO8859_13=y
++CONFIG_NLS_ISO8859_14=y
++CONFIG_NLS_ISO8859_15=y
++CONFIG_NLS_UTF8=y
++CONFIG_PRINTK_TIME=y
++CONFIG_DEBUG_FS=y
++CONFIG_DETECT_HUNG_TASK=y
++# CONFIG_DEBUG_PREEMPT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_FTRACE is not set
++CONFIG_KGDB=y
++CONFIG_KGDB_KDB=y
++# CONFIG_ARM_UNWIND is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_LIBCRC32C=y
+diff -urN linux-3.10/arch/arm/include/asm/fiq.h linux-rpi-3.10.y/arch/arm/include/asm/fiq.h
+--- linux-3.10/arch/arm/include/asm/fiq.h	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/include/asm/fiq.h	2013-07-06 15:25:50.000000000 +0100
+@@ -42,6 +42,7 @@
+ /* helpers defined in fiqasm.S: */
+ extern void __set_fiq_regs(unsigned long const *regs);
+ extern void __get_fiq_regs(unsigned long *regs);
++extern void __FIQ_Branch(unsigned long *regs);
+ 
+ static inline void set_fiq_regs(struct pt_regs const *regs)
+ {
+diff -urN linux-3.10/arch/arm/Kconfig linux-rpi-3.10.y/arch/arm/Kconfig
+--- linux-3.10/arch/arm/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -361,6 +361,23 @@
+ 	  This enables support for systems based on Atmel
+ 	  AT91RM9200 and AT91SAM9* processors.
+ 
++config ARCH_BCM2708
++	bool "Broadcom BCM2708 family"
++	select CPU_V6
++	select ARM_AMBA
++	select HAVE_CLK
++	select HAVE_SCHED_CLOCK
++	select NEED_MACH_MEMORY_H
++	select CLKDEV_LOOKUP
++	select ARCH_HAS_CPUFREQ
++	select GENERIC_CLOCKEVENTS
++	select ARM_ERRATA_411920
++	select MACH_BCM2708
++	select VC4
++	select FIQ
++	help
++	  This enables support for Broadcom BCM2708 boards.
++
+ config ARCH_CLPS711X
+ 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+ 	select ARCH_REQUIRE_GPIOLIB
+@@ -1025,6 +1042,7 @@
+ source "arch/arm/mach-vt8500/Kconfig"
+ 
+ source "arch/arm/mach-w90x900/Kconfig"
++source "arch/arm/mach-bcm2708/Kconfig"
+ 
+ source "arch/arm/mach-zynq/Kconfig"
+ 
+diff -urN linux-3.10/arch/arm/Kconfig.debug linux-rpi-3.10.y/arch/arm/Kconfig.debug
+--- linux-3.10/arch/arm/Kconfig.debug	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/Kconfig.debug	2013-07-06 15:25:50.000000000 +0100
+@@ -519,6 +519,14 @@
+ 		  For more details about semihosting, please see
+ 		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
+ 
++	config DEBUG_BCM2708_UART0
++		bool "Broadcom BCM2708 UART0 (PL011)"
++		depends on MACH_BCM2708
++		help
++		  Say Y here if you want the debug print routines to direct
++		  their output to UART 0. The port must have been initialised
++		  by the boot-loader before use.
++
+ endchoice
+ 
+ config DEBUG_EXYNOS_UART
+diff -urN linux-3.10/arch/arm/kernel/armksyms.c linux-rpi-3.10.y/arch/arm/kernel/armksyms.c
+--- linux-3.10/arch/arm/kernel/armksyms.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/kernel/armksyms.c	2013-07-06 15:25:50.000000000 +0100
+@@ -156,3 +156,7 @@
+ #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+ EXPORT_SYMBOL(__pv_phys_offset);
+ #endif
++
++extern void v6wbi_flush_kern_tlb_range(void);
++EXPORT_SYMBOL(v6wbi_flush_kern_tlb_range);
++
+diff -urN linux-3.10/arch/arm/kernel/fiqasm.S linux-rpi-3.10.y/arch/arm/kernel/fiqasm.S
+--- linux-3.10/arch/arm/kernel/fiqasm.S	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/kernel/fiqasm.S	2013-07-06 15:25:50.000000000 +0100
+@@ -25,6 +25,9 @@
+ ENTRY(__set_fiq_regs)
+ 	mov	r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE
+ 	mrs	r1, cpsr
++@@@@@@@@@@@@@@@ hack: enable the fiq here to keep usb driver happy
++	and	r1, #~PSR_F_BIT
++@@@@@@@@@@@@@@@ endhack: (need to find better place for this to happen)
+ 	msr	cpsr_c, r2	@ select FIQ mode
+ 	mov	r0, r0		@ avoid hazard prior to ARMv4
+ 	ldmia	r0!, {r8 - r12}
+@@ -47,3 +50,7 @@
+ 	mov	r0, r0		@ avoid hazard prior to ARMv4
+ 	mov	pc, lr
+ ENDPROC(__get_fiq_regs)
++
++ENTRY(__FIQ_Branch)
++	mov pc, r8
++ENDPROC(__FIQ_Branch)
+diff -urN linux-3.10/arch/arm/kernel/fiq.c linux-rpi-3.10.y/arch/arm/kernel/fiq.c
+--- linux-3.10/arch/arm/kernel/fiq.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/kernel/fiq.c	2013-07-06 15:25:50.000000000 +0100
+@@ -137,6 +137,7 @@
+ EXPORT_SYMBOL(set_fiq_handler);
+ EXPORT_SYMBOL(__set_fiq_regs);	/* defined in fiqasm.S */
+ EXPORT_SYMBOL(__get_fiq_regs);	/* defined in fiqasm.S */
++EXPORT_SYMBOL(__FIQ_Branch);	/* defined in fiqasm.S */
+ EXPORT_SYMBOL(claim_fiq);
+ EXPORT_SYMBOL(release_fiq);
+ EXPORT_SYMBOL(enable_fiq);
+diff -urN linux-3.10/arch/arm/mach-bcm2708/armctrl.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/armctrl.c
+--- linux-3.10/arch/arm/mach-bcm2708/armctrl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/armctrl.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,219 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/armctrl.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/io.h>
++#include <linux/version.h>
++#include <linux/syscore_ops.h>
++#include <linux/interrupt.h>
++
++#include <asm/mach/irq.h>
++#include <mach/hardware.h>
++#include "armctrl.h"
++
++/* For support of kernels >= 3.0 assume only one VIC for now*/
++static unsigned int remap_irqs[(INTERRUPT_ARASANSDIO + 1) - INTERRUPT_JPEG] = {
++	INTERRUPT_VC_JPEG,
++	INTERRUPT_VC_USB,
++	INTERRUPT_VC_3D,
++	INTERRUPT_VC_DMA2,
++	INTERRUPT_VC_DMA3,
++	INTERRUPT_VC_I2C,
++	INTERRUPT_VC_SPI,
++	INTERRUPT_VC_I2SPCM,
++	INTERRUPT_VC_SDIO,
++	INTERRUPT_VC_UART,
++	INTERRUPT_VC_ARASANSDIO
++};
++
++static void armctrl_mask_irq(struct irq_data *d)
++{
++	static const unsigned int disables[4] = {
++		ARM_IRQ_DIBL1,
++		ARM_IRQ_DIBL2,
++		ARM_IRQ_DIBL3,
++		0
++	};
++
++	if (d->irq >= FIQ_START) {
++		writel(0, __io_address(ARM_IRQ_FAST));
++	} else {
++		unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
++		writel(1 << (data & 0x1f), __io_address(disables[(data >> 5) & 0x3]));
++	}
++}
++
++static void armctrl_unmask_irq(struct irq_data *d)
++{
++	static const unsigned int enables[4] = {
++		ARM_IRQ_ENBL1,
++		ARM_IRQ_ENBL2,
++		ARM_IRQ_ENBL3,
++		0
++	};
++
++	if (d->irq >= FIQ_START) {
++		unsigned int data =
++		    (unsigned int)irq_get_chip_data(d->irq) - FIQ_START;
++		writel(0x80 | data, __io_address(ARM_IRQ_FAST));
++	} else {
++		unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
++		writel(1 << (data & 0x1f), __io_address(enables[(data >> 5) & 0x3]));
++	}
++}
++
++#if defined(CONFIG_PM)
++
++/* for kernels 3.xx use the new syscore_ops apis but for older kernels use the sys dev class */
++
++/* Static defines
++ * struct armctrl_device - VIC PM device (< 3.xx)
++ * @sysdev: The system device which is registered. (< 3.xx)
++ * @irq: The IRQ number for the base of the VIC.
++ * @base: The register base for the VIC.
++ * @resume_sources: A bitmask of interrupts for resume.
++ * @resume_irqs: The IRQs enabled for resume.
++ * @int_select: Save for VIC_INT_SELECT.
++ * @int_enable: Save for VIC_INT_ENABLE.
++ * @soft_int: Save for VIC_INT_SOFT.
++ * @protect: Save for VIC_PROTECT.
++ */
++struct armctrl_info {
++	void __iomem *base;
++	int irq;
++	u32 resume_sources;
++	u32 resume_irqs;
++	u32 int_select;
++	u32 int_enable;
++	u32 soft_int;
++	u32 protect;
++} armctrl;
++
++static int armctrl_suspend(void)
++{
++	return 0;
++}
++
++static void armctrl_resume(void)
++{
++	return;
++}
++
++/**
++ * armctrl_pm_register - Register a VIC for later power management control
++ * @base: The base address of the VIC.
++ * @irq: The base IRQ for the VIC.
++ * @resume_sources: bitmask of interrupts allowed for resume sources.
++ *
++ * For older kernels (< 3.xx) do -
++ * Register the VIC with the system device tree so that it can be notified
++ * of suspend and resume requests and ensure that the correct actions are
++ * taken to re-instate the settings on resume.
++ */
++static void __init armctrl_pm_register(void __iomem * base, unsigned int irq,
++				       u32 resume_sources)
++{
++	armctrl.base = base;
++	armctrl.resume_sources = resume_sources;
++	armctrl.irq = irq;
++}
++
++static int armctrl_set_wake(struct irq_data *d, unsigned int on)
++{
++	unsigned int off = d->irq & 31;
++	u32 bit = 1 << off;
++
++	if (!(bit & armctrl.resume_sources))
++		return -EINVAL;
++
++	if (on)
++		armctrl.resume_irqs |= bit;
++	else
++		armctrl.resume_irqs &= ~bit;
++
++	return 0;
++}
++
++#else
++static inline void armctrl_pm_register(void __iomem * base, unsigned int irq,
++				       u32 arg1)
++{
++}
++
++#define armctrl_suspend NULL
++#define armctrl_resume NULL
++#define armctrl_set_wake NULL
++#endif /* CONFIG_PM */
++
++static struct syscore_ops armctrl_syscore_ops = {
++	.suspend = armctrl_suspend,
++	.resume = armctrl_resume,
++};
++
++/**
++ * armctrl_syscore_init - initicall to register VIC pm functions
++ *
++ * This is called via late_initcall() to register
++ * the resources for the VICs due to the early
++ * nature of the VIC's registration.
++*/
++static int __init armctrl_syscore_init(void)
++{
++	register_syscore_ops(&armctrl_syscore_ops);
++	return 0;
++}
++
++late_initcall(armctrl_syscore_init);
++
++static struct irq_chip armctrl_chip = {
++	.name = "ARMCTRL",
++	.irq_ack = armctrl_mask_irq,
++	.irq_mask = armctrl_mask_irq,
++	.irq_unmask = armctrl_unmask_irq,
++	.irq_set_wake = armctrl_set_wake,
++};
++
++/**
++ * armctrl_init - initialise a vectored interrupt controller
++ * @base: iomem base address
++ * @irq_start: starting interrupt number, must be muliple of 32
++ * @armctrl_sources: bitmask of interrupt sources to allow
++ * @resume_sources: bitmask of interrupt sources to allow for resume
++ */
++int __init armctrl_init(void __iomem * base, unsigned int irq_start,
++			u32 armctrl_sources, u32 resume_sources)
++{
++	unsigned int irq;
++
++	for (irq = 0; irq < NR_IRQS; irq++) {
++		unsigned int data = irq;
++		if (irq >= INTERRUPT_JPEG && irq <= INTERRUPT_ARASANSDIO)
++			data = remap_irqs[irq - INTERRUPT_JPEG];
++
++		irq_set_chip(irq, &armctrl_chip);
++		irq_set_chip_data(irq, (void *)data);
++		irq_set_handler(irq, handle_level_irq);
++		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_DISABLED);
++	}
++
++	armctrl_pm_register(base, irq_start, resume_sources);
++	init_FIQ(FIQ_START);
++	return 0;
++}
+diff -urN linux-3.10/arch/arm/mach-bcm2708/armctrl.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/armctrl.h
+--- linux-3.10/arch/arm/mach-bcm2708/armctrl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/armctrl.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,27 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/armctrl.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __BCM2708_ARMCTRL_H
++#define __BCM2708_ARMCTRL_H
++
++extern int __init armctrl_init(void __iomem * base, unsigned int irq_start,
++			       u32 armctrl_sources, u32 resume_sources);
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/bcm2708.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708.c
+--- linux-3.10/arch/arm/mach-bcm2708/bcm2708.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,885 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/bcm2708.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/serial_8250.h>
++#include <linux/platform_device.h>
++#include <linux/syscore_ops.h>
++#include <linux/interrupt.h>
++#include <linux/amba/bus.h>
++#include <linux/amba/clcd.h>
++#include <linux/clockchips.h>
++#include <linux/cnt32_to_63.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++#include <linux/w1-gpio.h>
++
++#include <linux/version.h>
++#include <linux/clkdev.h>
++#include <asm/system.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/sched_clock.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++#include <asm/mach/irq.h>
++#include <asm/mach/time.h>
++#include <asm/mach/map.h>
++
++#include <mach/timex.h>
++#include <mach/dma.h>
++#include <mach/vcio.h>
++#include <mach/system.h>
++
++#include <linux/delay.h>
++
++#include "bcm2708.h"
++#include "armctrl.h"
++#include "clock.h"
++
++#ifdef CONFIG_BCM_VC_CMA
++#include <linux/broadcom/vc_cma.h>
++#endif
++
++
++/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to
++ * give us IO access only to 64Mbytes of physical memory (26 bits).  We could
++ * represent this window by setting our dmamasks to 26 bits but, in fact
++ * we're not going to use addresses outside this range (they're not in real
++ * memory) so we don't bother.
++ *
++ * In the future we might include code to use this IOMMU to remap other
++ * physical addresses onto VideoCore memory then the use of 32-bits would be
++ * more legitimate.
++ */
++#define DMA_MASK_BITS_COMMON 32
++
++// use GPIO 4 for the one-wire GPIO pin, if enabled
++#define W1_GPIO 4
++
++/* command line parameters */
++static unsigned boardrev, serial;
++static unsigned uart_clock;
++
++static void __init bcm2708_init_led(void);
++
++void __init bcm2708_init_irq(void)
++{
++	armctrl_init(__io_address(ARMCTRL_IC_BASE), 0, 0, 0);
++}
++
++static struct map_desc bcm2708_io_desc[] __initdata = {
++	{
++	 .virtual = IO_ADDRESS(ARMCTRL_BASE),
++	 .pfn = __phys_to_pfn(ARMCTRL_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(UART0_BASE),
++	 .pfn = __phys_to_pfn(UART0_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(UART1_BASE),
++	 .pfn = __phys_to_pfn(UART1_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(DMA_BASE),
++	 .pfn = __phys_to_pfn(DMA_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(MCORE_BASE),
++	 .pfn = __phys_to_pfn(MCORE_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(ST_BASE),
++	 .pfn = __phys_to_pfn(ST_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(USB_BASE),
++	 .pfn = __phys_to_pfn(USB_BASE),
++	 .length = SZ_128K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(PM_BASE),
++	 .pfn = __phys_to_pfn(PM_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(GPIO_BASE),
++	 .pfn = __phys_to_pfn(GPIO_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE}
++};
++
++void __init bcm2708_map_io(void)
++{
++	iotable_init(bcm2708_io_desc, ARRAY_SIZE(bcm2708_io_desc));
++}
++
++/* The STC is a free running counter that increments at the rate of 1MHz */
++#define STC_FREQ_HZ 1000000
++
++static inline uint32_t timer_read(void)
++{
++	/* STC: a free running counter that increments at the rate of 1MHz */
++	return readl(__io_address(ST_BASE + 0x04));
++}
++
++static unsigned long bcm2708_read_current_timer(void)
++{
++	return timer_read();
++}
++
++static u32 notrace bcm2708_read_sched_clock(void)
++{
++	return timer_read();
++}
++
++static cycle_t clksrc_read(struct clocksource *cs)
++{
++	return timer_read();
++}
++
++static struct clocksource clocksource_stc = {
++	.name = "stc",
++	.rating = 300,
++	.read = clksrc_read,
++	.mask = CLOCKSOURCE_MASK(32),
++	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
++};
++
++unsigned long frc_clock_ticks32(void)
++{
++	return timer_read();
++}
++
++static void __init bcm2708_clocksource_init(void)
++{
++	if (clocksource_register_hz(&clocksource_stc, STC_FREQ_HZ)) {
++		printk(KERN_ERR "timer: failed to initialize clock "
++		       "source %s\n", clocksource_stc.name);
++	}
++}
++
++
++/*
++ * These are fixed clocks.
++ */
++static struct clk ref24_clk = {
++	.rate = UART0_CLOCK,	/* The UART is clocked at 3MHz via APB_CLK */
++};
++
++static struct clk osc_clk = {
++#ifdef CONFIG_ARCH_BCM2708_CHIPIT
++	.rate = 27000000,
++#else
++	.rate = 500000000,	/* ARM clock is set from the VideoCore booter */
++#endif
++};
++
++/* warning - the USB needs a clock > 34MHz */
++
++static struct clk sdhost_clk = {
++#ifdef CONFIG_ARCH_BCM2708_CHIPIT
++	.rate = 4000000,	/* 4MHz */
++#else
++	.rate = 250000000,	/* 250MHz */
++#endif
++};
++
++static struct clk_lookup lookups[] = {
++	{			/* UART0 */
++	 .dev_id = "dev:f1",
++	 .clk = &ref24_clk,
++	 },
++	{			/* USB */
++	 .dev_id = "bcm2708_usb",
++	 .clk = &osc_clk,
++	 }, {	/* SPI */
++		 .dev_id = "bcm2708_spi.0",
++		 .clk = &sdhost_clk,
++	 }, {	/* BSC0 */
++		 .dev_id = "bcm2708_i2c.0",
++		 .clk = &sdhost_clk,
++	 }, {	/* BSC1 */
++		 .dev_id = "bcm2708_i2c.1",
++		 .clk = &sdhost_clk,
++	 }
++};
++
++#define UART0_IRQ	{ IRQ_UART, 0 /*NO_IRQ*/ }
++#define UART0_DMA	{ 15, 14 }
++
++AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
++
++static struct amba_device *amba_devs[] __initdata = {
++	&uart0_device,
++};
++
++static struct resource bcm2708_dmaman_resources[] = {
++	{
++	 .start = DMA_BASE,
++	 .end = DMA_BASE + SZ_4K - 1,
++	 .flags = IORESOURCE_MEM,
++	 }
++};
++
++static struct platform_device bcm2708_dmaman_device = {
++	.name = BCM_DMAMAN_DRIVER_NAME,
++	.id = 0,		/* first bcm2708_dma */
++	.resource = bcm2708_dmaman_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_dmaman_resources),
++};
++
++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
++static struct w1_gpio_platform_data w1_gpio_pdata = {
++	.pin = W1_GPIO,
++	.is_open_drain = 0,
++};
++
++static struct platform_device w1_device = {
++	.name = "w1-gpio",
++	.id = -1,
++	.dev.platform_data = &w1_gpio_pdata,
++};
++#endif
++
++static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_fb_device = {
++	.name = "bcm2708_fb",
++	.id = -1,		/* only one bcm2708_fb */
++	.resource = NULL,
++	.num_resources = 0,
++	.dev = {
++		.dma_mask = &fb_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++
++static struct plat_serial8250_port bcm2708_uart1_platform_data[] = {
++	{
++	 .mapbase = UART1_BASE + 0x40,
++	 .irq = IRQ_AUX,
++	 .uartclk = 125000000,
++	 .regshift = 2,
++	 .iotype = UPIO_MEM,
++	 .flags = UPF_FIXED_TYPE | UPF_IOREMAP | UPF_SKIP_TEST,
++	 .type = PORT_8250,
++	 },
++	{},
++};
++
++static struct platform_device bcm2708_uart1_device = {
++	.name = "serial8250",
++	.id = PLAT8250_DEV_PLATFORM,
++	.dev = {
++		.platform_data = bcm2708_uart1_platform_data,
++		},
++};
++
++static struct resource bcm2708_usb_resources[] = {
++	[0] = {
++	       .start = USB_BASE,
++	       .end = USB_BASE + SZ_128K - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++	[1] = {
++		.start = MPHI_BASE,
++		.end = MPHI_BASE + SZ_4K - 1,
++		.flags = IORESOURCE_MEM,
++	      },
++	[2] = {
++	       .start = IRQ_HOSTPORT,
++	       .end = IRQ_HOSTPORT,
++	       .flags = IORESOURCE_IRQ,
++	       },
++};
++
++bool fiq_fix_enable = true;
++
++static struct resource bcm2708_usb_resources_no_fiq_fix[] = {
++	[0] = {
++		.start = USB_BASE,
++		.end = USB_BASE + SZ_128K - 1,
++		.flags = IORESOURCE_MEM,
++		},
++	[1] = {
++		.start = IRQ_USB,
++		.end = IRQ_USB,
++		.flags = IORESOURCE_IRQ,
++		},
++};
++
++static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_usb_device = {
++	.name = "bcm2708_usb",
++	.id = -1,		/* only one bcm2708_usb */
++	.resource = bcm2708_usb_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_usb_resources),
++	.dev = {
++		.dma_mask = &usb_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++
++static struct resource bcm2708_vcio_resources[] = {
++	[0] = {			/* mailbox/semaphore/doorbell access */
++	       .start = MCORE_BASE,
++	       .end = MCORE_BASE + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++};
++
++static u64 vcio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_vcio_device = {
++	.name = BCM_VCIO_DRIVER_NAME,
++	.id = -1,		/* only one VideoCore I/O area */
++	.resource = bcm2708_vcio_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_vcio_resources),
++	.dev = {
++		.dma_mask = &vcio_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++
++#ifdef CONFIG_BCM2708_GPIO
++#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
++
++static struct resource bcm2708_gpio_resources[] = {
++	[0] = {			/* general purpose I/O */
++	       .start = GPIO_BASE,
++	       .end = GPIO_BASE + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++};
++
++static u64 gpio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_gpio_device = {
++	.name = BCM_GPIO_DRIVER_NAME,
++	.id = -1,		/* only one VideoCore I/O area */
++	.resource = bcm2708_gpio_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_gpio_resources),
++	.dev = {
++		.dma_mask = &gpio_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++#endif
++
++static struct resource bcm2708_systemtimer_resources[] = {
++	[0] = {			/* system timer access */
++	       .start = ST_BASE,
++	       .end = ST_BASE + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++	{
++	 .start = IRQ_TIMER3,
++	 .end = IRQ_TIMER3,
++	 .flags = IORESOURCE_IRQ,
++	 }
++
++};
++
++static u64 systemtimer_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_systemtimer_device = {
++	.name = "bcm2708_systemtimer",
++	.id = -1,		/* only one VideoCore I/O area */
++	.resource = bcm2708_systemtimer_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_systemtimer_resources),
++	.dev = {
++		.dma_mask = &systemtimer_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708	/* Arasan emmc SD */
++static struct resource bcm2708_emmc_resources[] = {
++	[0] = {
++	       .start = EMMC_BASE,
++	       .end = EMMC_BASE + SZ_256 - 1,	/* we only need this area */
++	       /* the memory map actually makes SZ_4K available  */
++	       .flags = IORESOURCE_MEM,
++	       },
++	[1] = {
++	       .start = IRQ_ARASANSDIO,
++	       .end = IRQ_ARASANSDIO,
++	       .flags = IORESOURCE_IRQ,
++	       },
++};
++
++static u64 bcm2708_emmc_dmamask = 0xffffffffUL;
++
++struct platform_device bcm2708_emmc_device = {
++	.name = "bcm2708_sdhci",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(bcm2708_emmc_resources),
++	.resource = bcm2708_emmc_resources,
++	.dev = {
++		.dma_mask = &bcm2708_emmc_dmamask,
++		.coherent_dma_mask = 0xffffffffUL},
++};
++#endif /* CONFIG_MMC_SDHCI_BCM2708 */
++
++static struct resource bcm2708_powerman_resources[] = {
++	[0] = {
++	       .start = PM_BASE,
++	       .end = PM_BASE + SZ_256 - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++};
++
++static u64 powerman_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++struct platform_device bcm2708_powerman_device = {
++	.name = "bcm2708_powerman",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(bcm2708_powerman_resources),
++	.resource = bcm2708_powerman_resources,
++	.dev = {
++		.dma_mask = &powerman_dmamask,
++		.coherent_dma_mask = 0xffffffffUL},
++};
++
++
++static struct platform_device bcm2708_alsa_devices[] = {
++	[0] = {
++	       .name = "bcm2835_AUD0",
++	       .id = 0,		/* first audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[1] = {
++	       .name = "bcm2835_AUD1",
++	       .id = 1,		/* second audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[2] = {
++	       .name = "bcm2835_AUD2",
++	       .id = 2,		/* third audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[3] = {
++	       .name = "bcm2835_AUD3",
++	       .id = 3,		/* forth audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[4] = {
++	       .name = "bcm2835_AUD4",
++	       .id = 4,		/* fifth audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[5] = {
++	       .name = "bcm2835_AUD5",
++	       .id = 5,		/* sixth audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[6] = {
++	       .name = "bcm2835_AUD6",
++	       .id = 6,		/* seventh audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[7] = {
++	       .name = "bcm2835_AUD7",
++	       .id = 7,		/* eighth audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++};
++
++static struct resource bcm2708_spi_resources[] = {
++	{
++		.start = SPI0_BASE,
++		.end = SPI0_BASE + SZ_256 - 1,
++		.flags = IORESOURCE_MEM,
++	}, {
++		.start = IRQ_SPI,
++		.end = IRQ_SPI,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++
++static struct platform_device bcm2708_spi_device = {
++	.name = "bcm2708_spi",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(bcm2708_spi_resources),
++	.resource = bcm2708_spi_resources,
++};
++
++#ifdef CONFIG_BCM2708_SPIDEV
++static struct spi_board_info bcm2708_spi_devices[] = {
++#ifdef CONFIG_SPI_SPIDEV
++	{
++		.modalias = "spidev",
++		.max_speed_hz = 500000,
++		.bus_num = 0,
++		.chip_select = 0,
++		.mode = SPI_MODE_0,
++	}, {
++		.modalias = "spidev",
++		.max_speed_hz = 500000,
++		.bus_num = 0,
++		.chip_select = 1,
++		.mode = SPI_MODE_0,
++	}
++#endif
++};
++#endif
++
++static struct resource bcm2708_bsc0_resources[] = {
++	{
++		.start = BSC0_BASE,
++		.end = BSC0_BASE + SZ_256 - 1,
++		.flags = IORESOURCE_MEM,
++	}, {
++		.start = INTERRUPT_I2C,
++		.end = INTERRUPT_I2C,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static struct platform_device bcm2708_bsc0_device = {
++	.name = "bcm2708_i2c",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(bcm2708_bsc0_resources),
++	.resource = bcm2708_bsc0_resources,
++};
++
++
++static struct resource bcm2708_bsc1_resources[] = {
++	{
++		.start = BSC1_BASE,
++		.end = BSC1_BASE + SZ_256 - 1,
++		.flags = IORESOURCE_MEM,
++	}, {
++		.start = INTERRUPT_I2C,
++		.end = INTERRUPT_I2C,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static struct platform_device bcm2708_bsc1_device = {
++	.name = "bcm2708_i2c",
++	.id = 1,
++	.num_resources = ARRAY_SIZE(bcm2708_bsc1_resources),
++	.resource = bcm2708_bsc1_resources,
++};
++
++static struct platform_device bcm2835_hwmon_device = {
++	.name = "bcm2835_hwmon",
++};
++
++static struct platform_device bcm2835_thermal_device = {
++	.name = "bcm2835_thermal",
++};
++
++int __init bcm_register_device(struct platform_device *pdev)
++{
++	int ret;
++
++	ret = platform_device_register(pdev);
++	if (ret)
++		pr_debug("Unable to register platform device '%s': %d\n",
++			 pdev->name, ret);
++
++	return ret;
++}
++
++static void bcm2708_restart(char mode, const char *cmd)
++{
++	uint32_t pm_rstc, pm_wdog;
++	uint32_t timeout = 10;
++
++	/* For quick reset notification add reboot=q to cmdline
++	 */
++	if(mode == 'q')
++	{
++		uint32_t pm_rsts = readl(__io_address(PM_RSTS));
++		pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRQ_SET;
++		writel(pm_rsts, __io_address(PM_RSTS));
++	}
++
++	/* Setup watchdog for reset */
++	pm_rstc = readl(__io_address(PM_RSTC));
++
++	pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0)
++	pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET;
++
++	writel(pm_wdog, __io_address(PM_WDOG));
++	writel(pm_rstc, __io_address(PM_RSTC));
++}
++
++/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */
++static void bcm2708_power_off(void)
++{
++	/* we set the watchdog hard reset bit here to distinguish this reset from the normal (full) reset. bootcode.bin will not reboot after a hard reset */
++	uint32_t pm_rsts = readl(__io_address(PM_RSTS));
++	pm_rsts = PM_PASSWORD | (pm_rsts & PM_RSTC_WRCFG_CLR) | PM_RSTS_HADWRH_SET;
++	writel(pm_rsts, __io_address(PM_RSTS));
++	/* continue with normal reset mechanism */
++	bcm2708_restart(0, "");
++}
++
++void __init bcm2708_init(void)
++{
++	int i;
++
++#if defined(CONFIG_BCM_VC_CMA)
++	vc_cma_early_init();
++#endif
++	printk("bcm2708.uart_clock = %d\n", uart_clock);
++	pm_power_off = bcm2708_power_off;
++
++	if (uart_clock)
++		lookups[0].clk->rate = uart_clock;
++
++	for (i = 0; i < ARRAY_SIZE(lookups); i++)
++		clkdev_add(&lookups[i]);
++
++	bcm_register_device(&bcm2708_dmaman_device);
++	bcm_register_device(&bcm2708_vcio_device);
++#ifdef CONFIG_BCM2708_GPIO
++	bcm_register_device(&bcm2708_gpio_device);
++#endif
++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
++	platform_device_register(&w1_device);
++#endif
++	bcm_register_device(&bcm2708_systemtimer_device);
++	bcm_register_device(&bcm2708_fb_device);
++	if (!fiq_fix_enable)
++	{
++		bcm2708_usb_device.resource = bcm2708_usb_resources_no_fiq_fix;
++		bcm2708_usb_device.num_resources = ARRAY_SIZE(bcm2708_usb_resources_no_fiq_fix);
++	}
++	bcm_register_device(&bcm2708_usb_device);
++	bcm_register_device(&bcm2708_uart1_device);
++	bcm_register_device(&bcm2708_powerman_device);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708
++	bcm_register_device(&bcm2708_emmc_device);
++#endif
++	bcm2708_init_led();
++	for (i = 0; i < ARRAY_SIZE(bcm2708_alsa_devices); i++)
++		bcm_register_device(&bcm2708_alsa_devices[i]);
++
++	bcm_register_device(&bcm2708_spi_device);
++	bcm_register_device(&bcm2708_bsc0_device);
++	bcm_register_device(&bcm2708_bsc1_device);
++
++	bcm_register_device(&bcm2835_hwmon_device);
++	bcm_register_device(&bcm2835_thermal_device);
++
++	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
++		struct amba_device *d = amba_devs[i];
++		amba_device_register(d, &iomem_resource);
++	}
++	system_rev = boardrev;
++	system_serial_low = serial;
++
++#ifdef CONFIG_BCM2708_SPIDEV
++	spi_register_board_info(bcm2708_spi_devices,
++			ARRAY_SIZE(bcm2708_spi_devices));
++#endif
++}
++
++static void timer_set_mode(enum clock_event_mode mode,
++			   struct clock_event_device *clk)
++{
++	switch (mode) {
++	case CLOCK_EVT_MODE_ONESHOT: /* Leave the timer disabled, .set_next_event will enable it */
++	case CLOCK_EVT_MODE_SHUTDOWN:
++		break;
++	case CLOCK_EVT_MODE_PERIODIC:
++
++	case CLOCK_EVT_MODE_UNUSED:
++	case CLOCK_EVT_MODE_RESUME:
++
++	default:
++		printk(KERN_ERR "timer_set_mode: unhandled mode:%d\n",
++		       (int)mode);
++		break;
++	}
++
++}
++
++static int timer_set_next_event(unsigned long cycles,
++				struct clock_event_device *unused)
++{
++	unsigned long stc;
++
++	stc = readl(__io_address(ST_BASE + 0x04));
++	writel(stc + cycles, __io_address(ST_BASE + 0x18));	/* stc3 */
++	return 0;
++}
++
++static struct clock_event_device timer0_clockevent = {
++	.name = "timer0",
++	.shift = 32,
++	.features = CLOCK_EVT_FEAT_ONESHOT,
++	.set_mode = timer_set_mode,
++	.set_next_event = timer_set_next_event,
++};
++
++/*
++ * IRQ handler for the timer
++ */
++static irqreturn_t bcm2708_timer_interrupt(int irq, void *dev_id)
++{
++	struct clock_event_device *evt = &timer0_clockevent;
++
++	writel(1 << 3, __io_address(ST_BASE + 0x00));	/* stcs clear timer int */
++
++	evt->event_handler(evt);
++
++	return IRQ_HANDLED;
++}
++
++static struct irqaction bcm2708_timer_irq = {
++	.name = "BCM2708 Timer Tick",
++	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
++	.handler = bcm2708_timer_interrupt,
++};
++
++/*
++ * Set up timer interrupt, and return the current time in seconds.
++ */
++
++static struct delay_timer bcm2708_delay_timer = {
++	.read_current_timer = bcm2708_read_current_timer,
++	.freq = STC_FREQ_HZ,
++};
++
++static void __init bcm2708_timer_init(void)
++{
++	/* init high res timer */
++	bcm2708_clocksource_init();
++
++	/*
++	 * Initialise to a known state (all timers off)
++	 */
++	writel(0, __io_address(ARM_T_CONTROL));
++	/*
++	 * Make irqs happen for the system timer
++	 */
++	setup_irq(IRQ_TIMER3, &bcm2708_timer_irq);
++
++	setup_sched_clock(bcm2708_read_sched_clock, 32, STC_FREQ_HZ);
++
++	timer0_clockevent.mult =
++	    div_sc(STC_FREQ_HZ, NSEC_PER_SEC, timer0_clockevent.shift);
++	timer0_clockevent.max_delta_ns =
++	    clockevent_delta2ns(0xffffffff, &timer0_clockevent);
++	timer0_clockevent.min_delta_ns =
++	    clockevent_delta2ns(0xf, &timer0_clockevent);
++
++	timer0_clockevent.cpumask = cpumask_of(0);
++	clockevents_register_device(&timer0_clockevent);
++
++	register_current_timer_delay(&bcm2708_delay_timer);
++}
++
++#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
++#include <linux/leds.h>
++
++static struct gpio_led bcm2708_leds[] = {
++	[0] = {
++	       .gpio = 16,
++	       .name = "led0",
++	       .default_trigger = "mmc0",
++	       .active_low = 1,
++	       },
++};
++
++static struct gpio_led_platform_data bcm2708_led_pdata = {
++	.num_leds = ARRAY_SIZE(bcm2708_leds),
++	.leds = bcm2708_leds,
++};
++
++static struct platform_device bcm2708_led_device = {
++	.name = "leds-gpio",
++	.id = -1,
++	.dev = {
++		.platform_data = &bcm2708_led_pdata,
++		},
++};
++
++static void __init bcm2708_init_led(void)
++{
++	platform_device_register(&bcm2708_led_device);
++}
++#else
++static inline void bcm2708_init_led(void)
++{
++}
++#endif
++
++void __init bcm2708_init_early(void)
++{
++	/*
++	 * Some devices allocate their coherent buffers from atomic
++	 * context. Increase size of atomic coherent pool to make sure such
++	 * the allocations won't fail.
++	 */
++	init_dma_coherent_pool_size(SZ_4M);
++}
++
++static void __init board_reserve(void)
++{
++#if defined(CONFIG_BCM_VC_CMA)
++	vc_cma_reserve();
++#endif
++}
++
++MACHINE_START(BCM2708, "BCM2708")
++    /* Maintainer: Broadcom Europe Ltd. */
++	.map_io = bcm2708_map_io,
++	.init_irq = bcm2708_init_irq,
++	.init_time = bcm2708_timer_init,
++	.init_machine = bcm2708_init,
++	.init_early = bcm2708_init_early,
++	.reserve = board_reserve,
++	.restart	= bcm2708_restart,
++MACHINE_END
++
++module_param(boardrev, uint, 0644);
++module_param(serial, uint, 0644);
++module_param(uart_clock, uint, 0644);
+diff -urN linux-3.10/arch/arm/mach-bcm2708/bcm2708_gpio.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708_gpio.c
+--- linux-3.10/arch/arm/mach-bcm2708/bcm2708_gpio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708_gpio.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,339 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <linux/list.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <mach/gpio.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <mach/platform.h>
++
++#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
++#define DRIVER_NAME BCM_GPIO_DRIVER_NAME
++#define BCM_GPIO_USE_IRQ 1
++
++#define GPIOFSEL(x)  (0x00+(x)*4)
++#define GPIOSET(x)   (0x1c+(x)*4)
++#define GPIOCLR(x)   (0x28+(x)*4)
++#define GPIOLEV(x)   (0x34+(x)*4)
++#define GPIOEDS(x)   (0x40+(x)*4)
++#define GPIOREN(x)   (0x4c+(x)*4)
++#define GPIOFEN(x)   (0x58+(x)*4)
++#define GPIOHEN(x)   (0x64+(x)*4)
++#define GPIOLEN(x)   (0x70+(x)*4)
++#define GPIOAREN(x)  (0x7c+(x)*4)
++#define GPIOAFEN(x)  (0x88+(x)*4)
++#define GPIOUD(x)    (0x94+(x)*4)
++#define GPIOUDCLK(x) (0x98+(x)*4)
++
++enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT,
++	GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4,
++	GPIO_FSEL_ALT0, GPIO_FSEL_ALT1,
++	GPIO_FSEL_ALT2, GPIO_FSEL_ALT3,
++};
++
++	/* Each of the two spinlocks protects a different set of hardware
++	 * regiters and data structurs. This decouples the code of the IRQ from
++	 * the GPIO code. This also makes the case of a GPIO routine call from
++	 * the IRQ code simpler.
++	 */
++static DEFINE_SPINLOCK(lock);	/* GPIO registers */
++
++struct bcm2708_gpio {
++	struct list_head list;
++	void __iomem *base;
++	struct gpio_chip gc;
++	unsigned long rising;
++	unsigned long falling;
++};
++
++static int bcm2708_set_function(struct gpio_chip *gc, unsigned offset,
++				int function)
++{
++	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
++	unsigned long flags;
++	unsigned gpiodir;
++	unsigned gpio_bank = offset / 10;
++	unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3;
++
++//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set_function %p (%d,%d)\n", gc, offset, function);
++	if (offset >= ARCH_NR_GPIOS)
++		return -EINVAL;
++
++	spin_lock_irqsave(&lock, flags);
++
++	gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
++	gpiodir &= ~(7 << gpio_field_offset);
++	gpiodir |= function << gpio_field_offset;
++	writel(gpiodir, gpio->base + GPIOFSEL(gpio_bank));
++	spin_unlock_irqrestore(&lock, flags);
++	gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
++
++	return 0;
++}
++
++static int bcm2708_gpio_dir_in(struct gpio_chip *gc, unsigned offset)
++{
++	return bcm2708_set_function(gc, offset, GPIO_FSEL_INPUT);
++}
++
++static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value);
++static int bcm2708_gpio_dir_out(struct gpio_chip *gc, unsigned offset,
++				int value)
++{
++	int ret;
++	ret = bcm2708_set_function(gc, offset, GPIO_FSEL_OUTPUT);
++	if (ret >= 0)
++		bcm2708_gpio_set(gc, offset, value);
++	return ret;
++}
++
++static int bcm2708_gpio_get(struct gpio_chip *gc, unsigned offset)
++{
++	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
++	unsigned gpio_bank = offset / 32;
++	unsigned gpio_field_offset = (offset - 32 * gpio_bank);
++	unsigned lev;
++
++	if (offset >= ARCH_NR_GPIOS)
++		return 0;
++	lev = readl(gpio->base + GPIOLEV(gpio_bank));
++//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_get %p (%d)=%d\n", gc, offset, 0x1 & (lev>>gpio_field_offset));
++	return 0x1 & (lev >> gpio_field_offset);
++}
++
++static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
++{
++	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
++	unsigned gpio_bank = offset / 32;
++	unsigned gpio_field_offset = (offset - 32 * gpio_bank);
++//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set %p (%d=%d)\n", gc, offset, value);
++	if (offset >= ARCH_NR_GPIOS)
++		return;
++	if (value)
++		writel(1 << gpio_field_offset, gpio->base + GPIOSET(gpio_bank));
++	else
++		writel(1 << gpio_field_offset, gpio->base + GPIOCLR(gpio_bank));
++}
++
++/*************************************************************************************************************************
++ * bcm2708 GPIO IRQ
++ */
++
++#if BCM_GPIO_USE_IRQ
++
++static int bcm2708_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++	return gpio_to_irq(gpio);
++}
++
++static int bcm2708_gpio_irq_set_type(struct irq_data *d, unsigned type)
++{
++	unsigned irq = d->irq;
++	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
++
++	if (type & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
++		return -EINVAL;
++
++	if (type & IRQ_TYPE_EDGE_RISING) {
++		gpio->rising |= (1 << irq_to_gpio(irq));
++	} else {
++		gpio->rising &= ~(1 << irq_to_gpio(irq));
++	}
++
++	if (type & IRQ_TYPE_EDGE_FALLING) {
++		gpio->falling |= (1 << irq_to_gpio(irq));
++	} else {
++		gpio->falling &= ~(1 << irq_to_gpio(irq));
++	}
++	return 0;
++}
++
++static void bcm2708_gpio_irq_mask(struct irq_data *d)
++{
++	unsigned irq = d->irq;
++	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
++	unsigned gn = irq_to_gpio(irq);
++	unsigned gb = gn / 32;
++	unsigned long rising = readl(gpio->base + GPIOREN(gb));
++	unsigned long falling = readl(gpio->base + GPIOFEN(gb));
++
++	gn = gn % 32;
++
++	writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb));
++	writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb));
++}
++
++static void bcm2708_gpio_irq_unmask(struct irq_data *d)
++{
++	unsigned irq = d->irq;
++	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
++	unsigned gn = irq_to_gpio(irq);
++	unsigned gb = gn / 32;
++	unsigned long rising = readl(gpio->base + GPIOREN(gb));
++	unsigned long falling = readl(gpio->base + GPIOFEN(gb));
++
++	gn = gn % 32;
++
++	writel(1 << gn, gpio->base + GPIOEDS(gb));
++
++	if (gpio->rising & (1 << gn)) {
++		writel(rising | (1 << gn), gpio->base + GPIOREN(gb));
++	} else {
++		writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb));
++	}
++
++	if (gpio->falling & (1 << gn)) {
++		writel(falling | (1 << gn), gpio->base + GPIOFEN(gb));
++	} else {
++		writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb));
++	}
++}
++
++static struct irq_chip bcm2708_irqchip = {
++	.name = "GPIO",
++	.irq_enable = bcm2708_gpio_irq_unmask,
++	.irq_disable = bcm2708_gpio_irq_mask,
++	.irq_unmask = bcm2708_gpio_irq_unmask,
++	.irq_mask = bcm2708_gpio_irq_mask,
++	.irq_set_type = bcm2708_gpio_irq_set_type,
++};
++
++static irqreturn_t bcm2708_gpio_interrupt(int irq, void *dev_id)
++{
++	unsigned long edsr;
++	unsigned bank;
++	int i;
++	unsigned gpio;
++	for (bank = 0; bank <= 1; bank++) {
++		edsr = readl(__io_address(GPIO_BASE) + GPIOEDS(bank));
++		for_each_set_bit(i, &edsr, 32) {
++			gpio = i + bank * 32;
++			generic_handle_irq(gpio_to_irq(gpio));
++		}
++		writel(0xffffffff, __io_address(GPIO_BASE) + GPIOEDS(bank));
++	}
++	return IRQ_HANDLED;
++}
++
++static struct irqaction bcm2708_gpio_irq = {
++	.name = "BCM2708 GPIO catchall handler",
++	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
++	.handler = bcm2708_gpio_interrupt,
++};
++
++static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
++{
++	unsigned irq;
++
++	ucb->gc.to_irq = bcm2708_gpio_to_irq;
++
++	for (irq = GPIO_IRQ_START; irq < (GPIO_IRQ_START + GPIO_IRQS); irq++) {
++		irq_set_chip_data(irq, ucb);
++		irq_set_chip(irq, &bcm2708_irqchip);
++		set_irq_flags(irq, IRQF_VALID);
++	}
++	setup_irq(IRQ_GPIO3, &bcm2708_gpio_irq);
++}
++
++#else
++
++static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
++{
++}
++
++#endif /* #if BCM_GPIO_USE_IRQ ***************************************************************************************************************** */
++
++static int bcm2708_gpio_probe(struct platform_device *dev)
++{
++	struct bcm2708_gpio *ucb;
++	struct resource *res;
++	int err = 0;
++
++	printk(KERN_INFO DRIVER_NAME ": bcm2708_gpio_probe %p\n", dev);
++
++	ucb = kzalloc(sizeof(*ucb), GFP_KERNEL);
++	if (NULL == ucb) {
++		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
++		       "mailbox memory\n");
++		err = -ENOMEM;
++		goto err;
++	}
++
++	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
++
++	platform_set_drvdata(dev, ucb);
++	ucb->base = __io_address(GPIO_BASE);
++
++	ucb->gc.label = "bcm2708_gpio";
++	ucb->gc.base = 0;
++	ucb->gc.ngpio = ARCH_NR_GPIOS;
++	ucb->gc.owner = THIS_MODULE;
++
++	ucb->gc.direction_input = bcm2708_gpio_dir_in;
++	ucb->gc.direction_output = bcm2708_gpio_dir_out;
++	ucb->gc.get = bcm2708_gpio_get;
++	ucb->gc.set = bcm2708_gpio_set;
++	ucb->gc.can_sleep = 0;
++
++	bcm2708_gpio_irq_init(ucb);
++
++	err = gpiochip_add(&ucb->gc);
++	if (err)
++		goto err;
++
++err:
++	return err;
++
++}
++
++static int bcm2708_gpio_remove(struct platform_device *dev)
++{
++	int err = 0;
++	struct bcm2708_gpio *ucb = platform_get_drvdata(dev);
++
++	printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_remove %p\n", dev);
++
++	err = gpiochip_remove(&ucb->gc);
++
++	platform_set_drvdata(dev, NULL);
++	kfree(ucb);
++
++	return err;
++}
++
++static struct platform_driver bcm2708_gpio_driver = {
++	.probe = bcm2708_gpio_probe,
++	.remove = bcm2708_gpio_remove,
++	.driver = {
++		   .name = "bcm2708_gpio"},
++};
++
++static int __init bcm2708_gpio_init(void)
++{
++	return platform_driver_register(&bcm2708_gpio_driver);
++}
++
++static void __exit bcm2708_gpio_exit(void)
++{
++	platform_driver_unregister(&bcm2708_gpio_driver);
++}
++
++module_init(bcm2708_gpio_init);
++module_exit(bcm2708_gpio_exit);
++
++MODULE_DESCRIPTION("Broadcom BCM2708 GPIO driver");
++MODULE_LICENSE("GPL");
+diff -urN linux-3.10/arch/arm/mach-bcm2708/bcm2708.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708.h
+--- linux-3.10/arch/arm/mach-bcm2708/bcm2708.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,51 @@
++/*
++ * linux/arch/arm/mach-bcm2708/bcm2708.h
++ *
++ * BCM2708 machine support header
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __BCM2708_BCM2708_H
++#define __BCM2708_BCM2708_H
++
++#include <linux/amba/bus.h>
++
++extern void __init bcm2708_init(void);
++extern void __init bcm2708_init_irq(void);
++extern void __init bcm2708_map_io(void);
++extern struct sys_timer bcm2708_timer;
++extern unsigned int mmc_status(struct device *dev);
++
++#define AMBA_DEVICE(name, busid, base, plat)			\
++static struct amba_device name##_device = {			\
++	.dev		= {					\
++		.coherent_dma_mask = ~0,			\
++		.init_name = busid,				\
++		.platform_data = plat,				\
++	},							\
++	.res		= {					\
++		.start	= base##_BASE,		\
++		.end	= (base##_BASE) + SZ_4K - 1,\
++		.flags	= IORESOURCE_MEM,			\
++	},							\
++	.dma_mask	= ~0,					\
++	.irq		= base##_IRQ,				\
++	/* .dma		= base##_DMA,*/				\
++}
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/clock.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/clock.c
+--- linux-3.10/arch/arm/mach-bcm2708/clock.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/clock.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,61 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/clock.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/device.h>
++#include <linux/list.h>
++#include <linux/errno.h>
++#include <linux/err.h>
++#include <linux/string.h>
++#include <linux/clk.h>
++#include <linux/mutex.h>
++
++#include <asm/clkdev.h>
++
++#include "clock.h"
++
++int clk_enable(struct clk *clk)
++{
++	return 0;
++}
++EXPORT_SYMBOL(clk_enable);
++
++void clk_disable(struct clk *clk)
++{
++}
++EXPORT_SYMBOL(clk_disable);
++
++unsigned long clk_get_rate(struct clk *clk)
++{
++	return clk->rate;
++}
++EXPORT_SYMBOL(clk_get_rate);
++
++long clk_round_rate(struct clk *clk, unsigned long rate)
++{
++	return clk->rate;
++}
++EXPORT_SYMBOL(clk_round_rate);
++
++int clk_set_rate(struct clk *clk, unsigned long rate)
++{
++	return -EIO;
++}
++EXPORT_SYMBOL(clk_set_rate);
+diff -urN linux-3.10/arch/arm/mach-bcm2708/clock.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/clock.h
+--- linux-3.10/arch/arm/mach-bcm2708/clock.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/clock.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,24 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/clock.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++struct module;
++
++struct clk {
++	unsigned long		rate;
++};
+diff -urN linux-3.10/arch/arm/mach-bcm2708/dma.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/dma.c
+--- linux-3.10/arch/arm/mach-bcm2708/dma.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/dma.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,399 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/dma.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/slab.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/scatterlist.h>
++
++#include <mach/dma.h>
++#include <mach/irqs.h>
++
++/*****************************************************************************\
++ *									     *
++ * Configuration							     *
++ *									     *
++\*****************************************************************************/
++
++#define CACHE_LINE_MASK 31
++#define DRIVER_NAME BCM_DMAMAN_DRIVER_NAME
++#define DEFAULT_DMACHAN_BITMAP 0x10  /* channel 4 only */
++
++/* valid only for channels 0 - 14, 15 has its own base address */
++#define BCM2708_DMA_CHAN(n)	((n)<<8) /* base address */
++#define BCM2708_DMA_CHANIO(dma_base, n) \
++   ((void __iomem *)((char *)(dma_base)+BCM2708_DMA_CHAN(n)))
++
++
++/*****************************************************************************\
++ *									     *
++ * DMA Auxilliary Functions						     *
++ *									     *
++\*****************************************************************************/
++
++/* A DMA buffer on an arbitrary boundary may separate a cache line into a
++   section inside the DMA buffer and another section outside it.
++   Even if we flush DMA buffers from the cache there is always the chance that
++   during a DMA someone will access the part of a cache line that is outside
++   the DMA buffer - which will then bring in unwelcome data.
++   Without being able to dictate our own buffer pools we must insist that
++   DMA buffers consist of a whole number of cache lines.
++*/
++
++extern int
++bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len)
++{
++	int i;
++
++	for (i = 0; i < sg_len; i++) {
++		if (sg_ptr[i].offset & CACHE_LINE_MASK ||
++		    sg_ptr[i].length & CACHE_LINE_MASK)
++			return 0;
++	}
++
++	return 1;
++}
++EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma);
++
++extern void
++bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block)
++{
++	dsb();	/* ARM data synchronization (push) operation */
++
++	writel(control_block,	     dma_chan_base + BCM2708_DMA_ADDR);
++	writel(BCM2708_DMA_ACTIVE,   dma_chan_base + BCM2708_DMA_CS);
++}
++
++extern void bcm_dma_wait_idle(void __iomem *dma_chan_base)
++{
++  dsb();
++
++  /* ugly busy wait only option for now */
++  while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE)
++    cpu_relax();
++}
++
++EXPORT_SYMBOL_GPL(bcm_dma_start);
++
++/* Complete an ongoing DMA (assuming its results are to be ignored)
++   Does nothing if there is no DMA in progress.
++   This routine waits for the current AXI transfer to complete before
++   terminating the current DMA.	 If the current transfer is hung on a DREQ used
++   by an uncooperative peripheral the AXI transfer may never complete.	In this
++   case the routine times out and return a non-zero error code.
++   Use of this routine doesn't guarantee that the ongoing or aborted DMA
++   does not produce an interrupt.
++*/
++extern int
++bcm_dma_abort(void __iomem *dma_chan_base)
++{
++	unsigned long int cs;
++	int rc = 0;
++
++	cs = readl(dma_chan_base + BCM2708_DMA_CS);
++
++	if (BCM2708_DMA_ACTIVE & cs) {
++		long int timeout = 10000;
++
++		/* write 0 to the active bit - pause the DMA */
++		writel(0, dma_chan_base + BCM2708_DMA_CS);
++
++		/* wait for any current AXI transfer to complete */
++		while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0)
++			cs = readl(dma_chan_base + BCM2708_DMA_CS);
++
++		if (0 != (cs & BCM2708_DMA_ISPAUSED)) {
++			/* we'll un-pause when we set of our next DMA */
++			rc = -ETIMEDOUT;
++
++		} else if (BCM2708_DMA_ACTIVE & cs) {
++			/* terminate the control block chain */
++			writel(0, dma_chan_base + BCM2708_DMA_NEXTCB);
++
++			/* abort the whole DMA */
++			writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE,
++			       dma_chan_base + BCM2708_DMA_CS);
++		}
++	}
++
++	return rc;
++}
++EXPORT_SYMBOL_GPL(bcm_dma_abort);
++
++
++/***************************************************************************** \
++ *									     *
++ * DMA Manager Device Methods						     *
++ *									     *
++\*****************************************************************************/
++
++struct vc_dmaman {
++	void __iomem *dma_base;
++	u32 chan_available; /* bitmap of available channels */
++	u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */
++};
++
++static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base,
++			   u32 chans_available)
++{
++	dmaman->dma_base = dma_base;
++	dmaman->chan_available = chans_available;
++	dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c;  /* chans 2 & 3 */
++	dmaman->has_feature[BCM_DMA_FEATURE_BULK_ORD] = 0x01;  /* chan 0 */
++}
++
++static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman,
++				unsigned preferred_feature_set)
++{
++	u32 chans;
++	int feature;
++
++	chans = dmaman->chan_available;
++	for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++)
++		/* select the subset of available channels with the desired
++		   feature so long as some of the candidate channels have that
++		   feature */
++		if ((preferred_feature_set & (1 << feature)) &&
++		    (chans & dmaman->has_feature[feature]))
++			chans &= dmaman->has_feature[feature];
++
++	if (chans) {
++		int chan = 0;
++		/* return the ordinal of the first channel in the bitmap */
++		while (chans != 0 && (chans & 1) == 0) {
++			chans >>= 1;
++			chan++;
++		}
++		/* claim the channel */
++		dmaman->chan_available &= ~(1 << chan);
++		return chan;
++	} else
++		return -ENOMEM;
++}
++
++static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan)
++{
++	if (chan < 0)
++		return -EINVAL;
++	else if ((1 << chan) & dmaman->chan_available)
++		return -EIDRM;
++	else {
++		dmaman->chan_available |= (1 << chan);
++		return 0;
++	}
++}
++
++/*****************************************************************************\
++ *									     *
++ * DMA IRQs								     *
++ *									     *
++\*****************************************************************************/
++
++static unsigned char bcm_dma_irqs[] = {
++	IRQ_DMA0,
++	IRQ_DMA1,
++	IRQ_DMA2,
++	IRQ_DMA3,
++	IRQ_DMA4,
++	IRQ_DMA5,
++	IRQ_DMA6,
++	IRQ_DMA7,
++	IRQ_DMA8,
++	IRQ_DMA9,
++	IRQ_DMA10,
++	IRQ_DMA11,
++	IRQ_DMA12
++};
++
++
++/***************************************************************************** \
++ *									     *
++ * DMA Manager Monitor							     *
++ *									     *
++\*****************************************************************************/
++
++static struct device *dmaman_dev;	/* we assume there's only one! */
++
++extern int bcm_dma_chan_alloc(unsigned preferred_feature_set,
++			      void __iomem **out_dma_base, int *out_dma_irq)
++{
++	if (!dmaman_dev)
++		return -ENODEV;
++	else {
++		struct vc_dmaman *dmaman  = dev_get_drvdata(dmaman_dev);
++		int rc;
++
++		device_lock(dmaman_dev);
++		rc = vc_dmaman_chan_alloc(dmaman, preferred_feature_set);
++		if (rc >= 0) {
++			*out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base,
++							   rc);
++			*out_dma_irq = bcm_dma_irqs[rc];
++		}
++		device_unlock(dmaman_dev);
++
++		return rc;
++	}
++}
++EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc);
++
++extern int bcm_dma_chan_free(int channel)
++{
++	if (dmaman_dev) {
++		struct vc_dmaman *dmaman = dev_get_drvdata(dmaman_dev);
++		int rc;
++
++		device_lock(dmaman_dev);
++		rc = vc_dmaman_chan_free(dmaman, channel);
++		device_unlock(dmaman_dev);
++
++		return rc;
++	} else
++		return -ENODEV;
++}
++EXPORT_SYMBOL_GPL(bcm_dma_chan_free);
++
++static int dev_dmaman_register(const char *dev_name, struct device *dev)
++{
++	int rc = dmaman_dev ? -EINVAL : 0;
++	dmaman_dev = dev;
++	return rc;
++}
++
++static void dev_dmaman_deregister(const char *dev_name, struct device *dev)
++{
++	dmaman_dev = NULL;
++}
++
++/*****************************************************************************\
++ *									     *
++ * DMA Device								     *
++ *									     *
++\*****************************************************************************/
++
++static int dmachans = -1; /* module parameter */
++
++static int bcm_dmaman_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++	struct vc_dmaman *dmaman;
++	struct resource *dma_res = NULL;
++	void __iomem *dma_base = NULL;
++	int have_dma_region = 0;
++
++	dmaman = kzalloc(sizeof(*dmaman), GFP_KERNEL);
++	if (NULL == dmaman) {
++		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
++		       "DMA management memory\n");
++		ret = -ENOMEM;
++	} else {
++
++		dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++		if (dma_res == NULL) {
++			printk(KERN_ERR DRIVER_NAME ": failed to obtain memory "
++			       "resource\n");
++			ret = -ENODEV;
++		} else if (!request_mem_region(dma_res->start,
++					       resource_size(dma_res),
++					       DRIVER_NAME)) {
++			dev_err(&pdev->dev, "cannot obtain DMA region\n");
++			ret = -EBUSY;
++		} else {
++			have_dma_region = 1;
++			dma_base = ioremap(dma_res->start,
++					   resource_size(dma_res));
++			if (!dma_base) {
++				dev_err(&pdev->dev, "cannot map DMA region\n");
++				ret = -ENOMEM;
++			} else {
++				/* use module parameter if one was provided */
++				if (dmachans > 0)
++					vc_dmaman_init(dmaman, dma_base,
++						       dmachans);
++				else
++					vc_dmaman_init(dmaman, dma_base,
++						       DEFAULT_DMACHAN_BITMAP);
++
++				platform_set_drvdata(pdev, dmaman);
++				dev_dmaman_register(DRIVER_NAME, &pdev->dev);
++
++				printk(KERN_INFO DRIVER_NAME ": DMA manager "
++				       "at %p\n", dma_base);
++			}
++		}
++	}
++	if (ret != 0) {
++		if (dma_base)
++			iounmap(dma_base);
++		if (dma_res && have_dma_region)
++			release_mem_region(dma_res->start,
++					   resource_size(dma_res));
++		if (dmaman)
++			kfree(dmaman);
++	}
++	return ret;
++}
++
++static int bcm_dmaman_remove(struct platform_device *pdev)
++{
++	struct vc_dmaman *dmaman = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++	dev_dmaman_deregister(DRIVER_NAME, &pdev->dev);
++	kfree(dmaman);
++
++	return 0;
++}
++
++static struct platform_driver bcm_dmaman_driver = {
++	.probe = bcm_dmaman_probe,
++	.remove = bcm_dmaman_remove,
++
++	.driver = {
++		   .name = DRIVER_NAME,
++		   .owner = THIS_MODULE,
++		   },
++};
++
++/*****************************************************************************\
++ *									     *
++ * Driver init/exit							     *
++ *									     *
++\*****************************************************************************/
++
++static int __init bcm_dmaman_drv_init(void)
++{
++	int ret;
++
++	ret = platform_driver_register(&bcm_dmaman_driver);
++	if (ret != 0) {
++		printk(KERN_ERR DRIVER_NAME ": failed to register "
++		       "on platform\n");
++	}
++
++	return ret;
++}
++
++static void __exit bcm_dmaman_drv_exit(void)
++{
++	platform_driver_unregister(&bcm_dmaman_driver);
++}
++
++module_init(bcm_dmaman_drv_init);
++module_exit(bcm_dmaman_drv_exit);
++
++module_param(dmachans, int, 0644);
++
++MODULE_AUTHOR("Gray Girling <grayg@broadcom.com>");
++MODULE_DESCRIPTION("DMA channel manager driver");
++MODULE_LICENSE("GPL");
++
++MODULE_PARM_DESC(dmachans, "Bitmap of DMA channels available to the ARM");
+diff -urN linux-3.10/arch/arm/mach-bcm2708/dmaer.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/dmaer.c
+--- linux-3.10/arch/arm/mach-bcm2708/dmaer.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/dmaer.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,887 @@
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kdev_t.h>
++#include <linux/fs.h>
++#include <linux/cdev.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/pagemap.h>
++#include <linux/device.h>
++#include <linux/jiffies.h>
++#include <linux/timex.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/uaccess.h>
++#include <asm/atomic.h>
++#include <asm/cacheflush.h>
++#include <asm/io.h>
++
++#include <mach/dma.h>
++#include <mach/vc_support.h>
++
++#ifdef ECLIPSE_IGNORE
++
++#define __user
++#define __init
++#define __exit
++#define __iomem
++#define KERN_DEBUG
++#define KERN_ERR
++#define KERN_WARNING
++#define KERN_INFO
++#define _IOWR(a, b, c) b
++#define _IOW(a, b, c) b
++#define _IO(a, b) b
++
++#endif
++
++//#define inline
++
++#define PRINTK(args...) printk(args)
++//#define PRINTK_VERBOSE(args...) printk(args)
++//#define PRINTK(args...)
++#define PRINTK_VERBOSE(args...)
++
++/***** TYPES ****/
++#define PAGES_PER_LIST 500
++struct PageList
++{
++	struct page *m_pPages[PAGES_PER_LIST];
++	unsigned int m_used;
++	struct PageList *m_pNext;
++};
++
++struct VmaPageList
++{
++	//each vma has a linked list of pages associated with it
++	struct PageList *m_pPageHead;
++	struct PageList *m_pPageTail;
++	unsigned int m_refCount;
++};
++
++struct DmaControlBlock
++{
++	unsigned int m_transferInfo;
++	void __user *m_pSourceAddr;
++	void __user *m_pDestAddr;
++	unsigned int m_xferLen;
++	unsigned int m_tdStride;
++	struct DmaControlBlock *m_pNext;
++	unsigned int m_blank1, m_blank2;
++};
++
++/***** DEFINES ******/
++//magic number defining the module
++#define DMA_MAGIC		0xdd
++
++//do user virtual to physical translation of the CB chain
++#define DMA_PREPARE		_IOWR(DMA_MAGIC, 0, struct DmaControlBlock *)
++
++//kick the pre-prepared CB chain
++#define DMA_KICK		_IOW(DMA_MAGIC, 1, struct DmaControlBlock *)
++
++//prepare it, kick it, wait for it
++#define DMA_PREPARE_KICK_WAIT	_IOWR(DMA_MAGIC, 2, struct DmaControlBlock *)
++
++//prepare it, kick it, don't wait for it
++#define DMA_PREPARE_KICK	_IOWR(DMA_MAGIC, 3, struct DmaControlBlock *)
++
++//not currently implemented
++#define DMA_WAIT_ONE		_IO(DMA_MAGIC, 4, struct DmaControlBlock *)
++
++//wait on all kicked CB chains
++#define DMA_WAIT_ALL		_IO(DMA_MAGIC, 5)
++
++//in order to discover the largest AXI burst that should be programmed into the transfer params
++#define DMA_MAX_BURST		_IO(DMA_MAGIC, 6)
++
++//set the address range through which the user address is assumed to already by a physical address
++#define DMA_SET_MIN_PHYS	_IOW(DMA_MAGIC, 7, unsigned long)
++#define DMA_SET_MAX_PHYS	_IOW(DMA_MAGIC, 8, unsigned long)
++#define DMA_SET_PHYS_OFFSET	_IOW(DMA_MAGIC, 9, unsigned long)
++
++//used to define the size for the CMA-based allocation *in pages*, can only be done once once the file is opened
++#define DMA_CMA_SET_SIZE	_IOW(DMA_MAGIC, 10, unsigned long)
++
++//used to get the version of the module, to test for a capability
++#define DMA_GET_VERSION		_IO(DMA_MAGIC, 99)
++
++#define VERSION_NUMBER 1
++
++#define VIRT_TO_BUS_CACHE_SIZE 8
++
++/***** FILE OPS *****/
++static int Open(struct inode *pInode, struct file *pFile);
++static int Release(struct inode *pInode, struct file *pFile);
++static long Ioctl(struct file *pFile, unsigned int cmd, unsigned long arg);
++static ssize_t Read(struct file *pFile, char __user *pUser, size_t count, loff_t *offp);
++static int Mmap(struct file *pFile, struct vm_area_struct *pVma);
++
++/***** VMA OPS ****/
++static void VmaOpen4k(struct vm_area_struct *pVma);
++static void VmaClose4k(struct vm_area_struct *pVma);
++static int VmaFault4k(struct vm_area_struct *pVma, struct vm_fault *pVmf);
++
++/**** DMA PROTOTYPES */
++static struct DmaControlBlock __user *DmaPrepare(struct DmaControlBlock __user *pUserCB, int *pError);
++static int DmaKick(struct DmaControlBlock __user *pUserCB);
++static void DmaWaitAll(void);
++
++/**** GENERIC ****/
++static int __init dmaer_init(void);
++static void __exit dmaer_exit(void);
++
++/*** OPS ***/
++static struct vm_operations_struct g_vmOps4k = {
++	.open = VmaOpen4k,
++	.close = VmaClose4k,
++	.fault = VmaFault4k,
++};
++
++static struct file_operations g_fOps = {
++	.owner = THIS_MODULE,
++	.llseek = 0,
++	.read = Read,
++	.write = 0,
++	.unlocked_ioctl = Ioctl,
++	.open = Open,
++	.release = Release,
++	.mmap = Mmap,
++};
++
++/***** GLOBALS ******/
++static dev_t g_majorMinor;
++
++//tracking usage of the two files
++static atomic_t g_oneLock4k = ATOMIC_INIT(1);
++
++//device operations
++static struct cdev g_cDev;
++static int g_trackedPages = 0;
++
++//dma control
++static unsigned int *g_pDmaChanBase;
++static int g_dmaIrq;
++static int g_dmaChan;
++
++//cma allocation
++static int g_cmaHandle;
++
++//user virtual to bus address translation acceleration
++static unsigned long g_virtAddr[VIRT_TO_BUS_CACHE_SIZE];
++static unsigned long g_busAddr[VIRT_TO_BUS_CACHE_SIZE];
++static unsigned long g_cbVirtAddr;
++static unsigned long g_cbBusAddr;
++static int g_cacheInsertAt;
++static int g_cacheHit, g_cacheMiss;
++
++//off by default
++static void __user *g_pMinPhys;
++static void __user *g_pMaxPhys;
++static unsigned long g_physOffset;
++
++/****** CACHE OPERATIONS ********/
++static inline void FlushAddrCache(void)
++{
++	int count = 0;
++	for (count = 0; count < VIRT_TO_BUS_CACHE_SIZE; count++)
++		g_virtAddr[count] = 0xffffffff;			//never going to match as we always chop the bottom bits anyway
++
++	g_cbVirtAddr = 0xffffffff;
++
++	g_cacheInsertAt = 0;
++}
++
++//translate from a user virtual address to a bus address by mapping the page
++//NB this won't lock a page in memory, so to avoid potential paging issues using kernel logical addresses
++static inline void __iomem *UserVirtualToBus(void __user *pUser)
++{
++	int mapped;
++	struct page *pPage;
++	void *phys;
++
++	//map it (requiring that the pointer points to something that does not hang off the page boundary)
++	mapped = get_user_pages(current, current->mm,
++		(unsigned long)pUser, 1,
++		1, 0,
++		&pPage,
++		0);
++
++	if (mapped <= 0)		//error
++		return 0;
++
++	PRINTK_VERBOSE(KERN_DEBUG "user virtual %p arm phys %p bus %p\n",
++			pUser, page_address(pPage), (void __iomem *)__virt_to_bus(page_address(pPage)));
++
++	//get the arm physical address
++	phys = page_address(pPage) + offset_in_page(pUser);
++	page_cache_release(pPage);
++
++	//and now the bus address
++	return (void __iomem *)__virt_to_bus(phys);
++}
++
++static inline void __iomem *UserVirtualToBusViaCbCache(void __user *pUser)
++{
++	unsigned long virtual_page = (unsigned long)pUser & ~4095;
++	unsigned long page_offset = (unsigned long)pUser & 4095;
++	unsigned long bus_addr;
++
++	if (g_cbVirtAddr == virtual_page)
++	{
++		bus_addr = g_cbBusAddr + page_offset;
++		g_cacheHit++;
++		return (void __iomem *)bus_addr;
++	}
++	else
++	{
++		bus_addr = (unsigned long)UserVirtualToBus(pUser);
++		
++		if (!bus_addr)
++			return 0;
++		
++		g_cbVirtAddr = virtual_page;
++		g_cbBusAddr = bus_addr & ~4095;
++		g_cacheMiss++;
++
++		return (void __iomem *)bus_addr;
++	}
++}
++
++//do the same as above, by query our virt->bus cache
++static inline void __iomem *UserVirtualToBusViaCache(void __user *pUser)
++{
++	int count;
++	//get the page and its offset
++	unsigned long virtual_page = (unsigned long)pUser & ~4095;
++	unsigned long page_offset = (unsigned long)pUser & 4095;
++	unsigned long bus_addr;
++
++	if (pUser >= g_pMinPhys && pUser < g_pMaxPhys)
++	{
++		PRINTK_VERBOSE(KERN_DEBUG "user->phys passthrough on %p\n", pUser);
++		return (void __iomem *)((unsigned long)pUser + g_physOffset);
++	}
++
++	//check the cache for our entry
++	for (count = 0; count < VIRT_TO_BUS_CACHE_SIZE; count++)
++		if (g_virtAddr[count] == virtual_page)
++		{
++			bus_addr = g_busAddr[count] + page_offset;
++			g_cacheHit++;
++			return (void __iomem *)bus_addr;
++		}
++
++	//not found, look up manually and then insert its page address
++	bus_addr = (unsigned long)UserVirtualToBus(pUser);
++
++	if (!bus_addr)
++		return 0;
++
++	g_virtAddr[g_cacheInsertAt] = virtual_page;
++	g_busAddr[g_cacheInsertAt] = bus_addr & ~4095;
++
++	//round robin
++	g_cacheInsertAt++;
++	if (g_cacheInsertAt == VIRT_TO_BUS_CACHE_SIZE)
++		g_cacheInsertAt = 0;
++
++	g_cacheMiss++;
++
++	return (void __iomem *)bus_addr;
++}
++
++/***** FILE OPERATIONS ****/
++static int Open(struct inode *pInode, struct file *pFile)
++{
++	PRINTK(KERN_DEBUG "file opening: %d/%d\n", imajor(pInode), iminor(pInode));
++	
++	//check which device we are
++	if (iminor(pInode) == 0)		//4k
++	{
++		//only one at a time
++		if (!atomic_dec_and_test(&g_oneLock4k))
++		{
++			atomic_inc(&g_oneLock4k);
++			return -EBUSY;
++		}
++	}
++	else
++		return -EINVAL;
++	
++	//todo there will be trouble if two different processes open the files
++
++	//reset after any file is opened
++	g_pMinPhys = (void __user *)-1;
++	g_pMaxPhys = (void __user *)0;
++	g_physOffset = 0;
++	g_cmaHandle = 0;
++
++	return 0;
++}
++
++static int Release(struct inode *pInode, struct file *pFile)
++{
++	PRINTK(KERN_DEBUG "file closing, %d pages tracked\n", g_trackedPages);
++	if (g_trackedPages)
++		PRINTK(KERN_ERR "we\'re leaking memory!\n");
++	
++	//wait for any dmas to finish
++	DmaWaitAll();
++
++	//free this memory on the application closing the file or it crashing (implicitly closing the file)
++	if (g_cmaHandle)
++	{
++		PRINTK(KERN_DEBUG "unlocking vc memory\n");
++		if (UnlockVcMemory(g_cmaHandle))
++			PRINTK(KERN_ERR "uh-oh, unable to unlock vc memory!\n");
++		PRINTK(KERN_DEBUG "releasing vc memory\n");
++		if (ReleaseVcMemory(g_cmaHandle))
++			PRINTK(KERN_ERR "uh-oh, unable to release vc memory!\n");
++	}
++
++	if (iminor(pInode) == 0)
++		atomic_inc(&g_oneLock4k);
++	else
++		return -EINVAL;
++
++	return 0;
++}
++
++static struct DmaControlBlock __user *DmaPrepare(struct DmaControlBlock __user *pUserCB, int *pError)
++{
++	struct DmaControlBlock kernCB;
++	struct DmaControlBlock __user *pUNext;
++	void __iomem *pSourceBus, __iomem *pDestBus;
++	
++	//get the control block into kernel memory so we can work on it
++	if (copy_from_user(&kernCB, pUserCB, sizeof(struct DmaControlBlock)) != 0)
++	{
++		PRINTK(KERN_ERR "copy_from_user failed for user cb %p\n", pUserCB);
++		*pError = 1;
++		return 0;
++	}
++	
++	if (kernCB.m_pSourceAddr == 0 || kernCB.m_pDestAddr == 0)
++	{
++		PRINTK(KERN_ERR "faulty source (%p) dest (%p) addresses for user cb %p\n",
++			kernCB.m_pSourceAddr, kernCB.m_pDestAddr, pUserCB);
++		*pError = 1;
++		return 0;
++	}
++
++	pSourceBus = UserVirtualToBusViaCache(kernCB.m_pSourceAddr);
++	pDestBus = UserVirtualToBusViaCache(kernCB.m_pDestAddr);
++
++	if (!pSourceBus || !pDestBus)
++	{
++		PRINTK(KERN_ERR "virtual to bus translation failure for source/dest %p/%p->%p/%p\n",
++				kernCB.m_pSourceAddr, kernCB.m_pDestAddr,
++				pSourceBus, pDestBus);
++		*pError = 1;
++		return 0;
++	}
++	
++	//update the user structure with the new bus addresses
++	kernCB.m_pSourceAddr = pSourceBus;
++	kernCB.m_pDestAddr = pDestBus;
++
++	PRINTK_VERBOSE(KERN_DEBUG "final source %p dest %p\n", kernCB.m_pSourceAddr, kernCB.m_pDestAddr);
++		
++	//sort out the bus address for the next block
++	pUNext = kernCB.m_pNext;
++	
++	if (kernCB.m_pNext)
++	{
++		void __iomem *pNextBus;
++		pNextBus = UserVirtualToBusViaCbCache(kernCB.m_pNext);
++
++		if (!pNextBus)
++		{
++			PRINTK(KERN_ERR "virtual to bus translation failure for m_pNext\n");
++			*pError = 1;
++			return 0;
++		}
++
++		//update the pointer with the bus address
++		kernCB.m_pNext = pNextBus;
++	}
++	
++	//write it back to user space
++	if (copy_to_user(pUserCB, &kernCB, sizeof(struct DmaControlBlock)) != 0)
++	{
++		PRINTK(KERN_ERR "copy_to_user failed for cb %p\n", pUserCB);
++		*pError = 1;
++		return 0;
++	}
++
++	__cpuc_flush_dcache_area(pUserCB, 32);
++
++	*pError = 0;
++	return pUNext;
++}
++
++static int DmaKick(struct DmaControlBlock __user *pUserCB)
++{
++	void __iomem *pBusCB;
++	
++	pBusCB = UserVirtualToBusViaCbCache(pUserCB);
++	if (!pBusCB)
++	{
++		PRINTK(KERN_ERR "virtual to bus translation failure for cb\n");
++		return 1;
++	}
++
++	//flush_cache_all();
++
++	bcm_dma_start(g_pDmaChanBase, (dma_addr_t)pBusCB);
++	
++	return 0;
++}
++
++static void DmaWaitAll(void)
++{
++	int counter = 0;
++	volatile int inner_count;
++	volatile unsigned int cs;
++	unsigned long time_before, time_after;
++
++	time_before = jiffies;
++	//bcm_dma_wait_idle(g_pDmaChanBase);
++	dsb();
++	
++	cs = readl(g_pDmaChanBase);
++	
++	while ((cs & 1) == 1)
++	{
++		cs = readl(g_pDmaChanBase);
++		counter++;
++
++		for (inner_count = 0; inner_count < 32; inner_count++);
++
++		asm volatile ("MCR p15,0,r0,c7,c0,4 \n");
++		//cpu_do_idle();
++		if (counter >= 1000000)
++		{
++			PRINTK(KERN_WARNING "DMA failed to finish in a timely fashion\n");
++			break;
++		}
++	}
++	time_after = jiffies;
++	PRINTK_VERBOSE(KERN_DEBUG "done, counter %d, cs %08x", counter, cs);
++	PRINTK_VERBOSE(KERN_DEBUG "took %ld jiffies, %d HZ\n", time_after - time_before, HZ);
++}
++
++static long Ioctl(struct file *pFile, unsigned int cmd, unsigned long arg)
++{
++	int error = 0;
++	PRINTK_VERBOSE(KERN_DEBUG "ioctl cmd %x arg %lx\n", cmd, arg);
++
++	switch (cmd)
++	{
++	case DMA_PREPARE:
++	case DMA_PREPARE_KICK:
++	case DMA_PREPARE_KICK_WAIT:
++		{
++			struct DmaControlBlock __user *pUCB = (struct DmaControlBlock *)arg;
++			int steps = 0;
++			unsigned long start_time = jiffies;
++			(void)start_time;
++
++			//flush our address cache
++			FlushAddrCache();
++
++			PRINTK_VERBOSE(KERN_DEBUG "dma prepare\n");
++
++			//do virtual to bus translation for each entry
++			do
++			{
++				pUCB = DmaPrepare(pUCB, &error);
++			} while (error == 0 && ++steps && pUCB);
++			PRINTK_VERBOSE(KERN_DEBUG "prepare done in %d steps, %ld\n", steps, jiffies - start_time);
++
++			//carry straight on if we want to kick too
++			if (cmd == DMA_PREPARE || error)
++			{
++				PRINTK_VERBOSE(KERN_DEBUG "falling out\n");
++				return error ? -EINVAL : 0;
++			}
++		}
++	case DMA_KICK:
++		PRINTK_VERBOSE(KERN_DEBUG "dma begin\n");
++
++		if (cmd == DMA_KICK)
++			FlushAddrCache();
++
++		DmaKick((struct DmaControlBlock __user *)arg);
++		
++		if (cmd != DMA_PREPARE_KICK_WAIT)
++			break;
++/*	case DMA_WAIT_ONE:
++		//PRINTK(KERN_DEBUG "dma wait one\n");
++		break;*/
++	case DMA_WAIT_ALL:
++		//PRINTK(KERN_DEBUG "dma wait all\n");
++		DmaWaitAll();
++		break;
++	case DMA_MAX_BURST:
++		if (g_dmaChan == 0)
++			return 10;
++		else
++			return 5;
++	case DMA_SET_MIN_PHYS:
++		g_pMinPhys = (void __user *)arg;
++		PRINTK(KERN_DEBUG "min/max user/phys bypass set to %p %p\n", g_pMinPhys, g_pMaxPhys);
++		break;
++	case DMA_SET_MAX_PHYS:
++		g_pMaxPhys = (void __user *)arg;
++		PRINTK(KERN_DEBUG "min/max user/phys bypass set to %p %p\n", g_pMinPhys, g_pMaxPhys);
++		break;
++	case DMA_SET_PHYS_OFFSET:
++		g_physOffset = arg;
++		PRINTK(KERN_DEBUG "user/phys bypass offset set to %ld\n", g_physOffset);
++		break;
++	case DMA_CMA_SET_SIZE:
++	{
++		unsigned int pBusAddr;
++
++		if (g_cmaHandle)
++		{
++			PRINTK(KERN_ERR "memory has already been allocated (handle %d)\n", g_cmaHandle);
++			return -EINVAL;
++		}
++
++		PRINTK(KERN_INFO "allocating %ld bytes of VC memory\n", arg * 4096);
++
++		//get the memory
++		if (AllocateVcMemory(&g_cmaHandle, arg * 4096, 4096, MEM_FLAG_L1_NONALLOCATING | MEM_FLAG_NO_INIT | MEM_FLAG_HINT_PERMALOCK))
++		{
++			PRINTK(KERN_ERR "failed to allocate %ld bytes of VC memory\n", arg * 4096);
++			g_cmaHandle = 0;
++			return -EINVAL;
++		}
++
++		//get an address for it
++		PRINTK(KERN_INFO "trying to map VC memory\n");
++
++		if (LockVcMemory(&pBusAddr, g_cmaHandle))
++		{
++			PRINTK(KERN_ERR "failed to map CMA handle %d, releasing memory\n", g_cmaHandle);
++			ReleaseVcMemory(g_cmaHandle);
++			g_cmaHandle = 0;
++		}
++
++		PRINTK(KERN_INFO "bus address for CMA memory is %x\n", pBusAddr);
++		return pBusAddr;
++	}
++	case DMA_GET_VERSION:
++		PRINTK(KERN_DEBUG "returning version number, %d\n", VERSION_NUMBER);
++		return VERSION_NUMBER;
++	default:
++		PRINTK(KERN_DEBUG "unknown ioctl: %d\n", cmd);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static ssize_t Read(struct file *pFile, char __user *pUser, size_t count, loff_t *offp)
++{
++	return -EIO;
++}
++
++static int Mmap(struct file *pFile, struct vm_area_struct *pVma)
++{
++	struct PageList *pPages;
++	struct VmaPageList *pVmaList;
++	
++	PRINTK_VERBOSE(KERN_DEBUG "MMAP vma %p, length %ld (%s %d)\n",
++		pVma, pVma->vm_end - pVma->vm_start,
++		current->comm, current->pid);
++	PRINTK_VERBOSE(KERN_DEBUG "MMAP %p %d (tracked %d)\n", pVma, current->pid, g_trackedPages);
++
++	//make a new page list
++	pPages = (struct PageList *)kmalloc(sizeof(struct PageList), GFP_KERNEL);
++	if (!pPages)
++	{
++		PRINTK(KERN_ERR "couldn\'t allocate a new page list (%s %d)\n",
++			current->comm, current->pid);
++		return -ENOMEM;
++	}
++
++	//clear the page list
++	pPages->m_used = 0;
++	pPages->m_pNext = 0;
++	
++	//insert our vma and new page list somewhere
++	if (!pVma->vm_private_data)
++	{
++		struct VmaPageList *pList;
++
++		PRINTK_VERBOSE(KERN_DEBUG "new vma list, making new one (%s %d)\n",
++			current->comm, current->pid);
++
++		//make a new vma list
++		pList = (struct VmaPageList *)kmalloc(sizeof(struct VmaPageList), GFP_KERNEL);
++		if (!pList)
++		{
++			PRINTK(KERN_ERR "couldn\'t allocate vma page list (%s %d)\n",
++				current->comm, current->pid);
++			kfree(pPages);
++			return -ENOMEM;
++		}
++
++		//clear this list
++		pVma->vm_private_data = (void *)pList;
++		pList->m_refCount = 0;
++	}
++
++	pVmaList = (struct VmaPageList *)pVma->vm_private_data;
++
++	//add it to the vma list
++	pVmaList->m_pPageHead = pPages;
++	pVmaList->m_pPageTail = pPages;
++
++	pVma->vm_ops = &g_vmOps4k;
++	pVma->vm_flags |= VM_IO;
++
++	VmaOpen4k(pVma);
++
++	return 0;
++}
++
++/****** VMA OPERATIONS ******/
++
++static void VmaOpen4k(struct vm_area_struct *pVma)
++{
++	struct VmaPageList *pVmaList;
++
++	PRINTK_VERBOSE(KERN_DEBUG "vma open %p private %p (%s %d), %d live pages\n", pVma, pVma->vm_private_data, current->comm, current->pid, g_trackedPages);
++	PRINTK_VERBOSE(KERN_DEBUG "OPEN %p %d %ld pages (tracked pages %d)\n",
++		pVma, current->pid, (pVma->vm_end - pVma->vm_start) >> 12,
++		g_trackedPages);
++
++	pVmaList = (struct VmaPageList *)pVma->vm_private_data;
++
++	if (pVmaList)
++	{
++		pVmaList->m_refCount++;
++		PRINTK_VERBOSE(KERN_DEBUG "ref count is now %d\n", pVmaList->m_refCount);
++	}
++	else
++	{
++		PRINTK_VERBOSE(KERN_DEBUG "err, open but no vma page list\n");
++	}
++}
++
++static void VmaClose4k(struct vm_area_struct *pVma)
++{
++	struct VmaPageList *pVmaList;
++	int freed = 0;
++	
++	PRINTK_VERBOSE(KERN_DEBUG "vma close %p private %p (%s %d)\n", pVma, pVma->vm_private_data, current->comm, current->pid);
++	
++	//wait for any dmas to finish
++	DmaWaitAll();
++
++	//find our vma in the list
++	pVmaList = (struct VmaPageList *)pVma->vm_private_data;
++
++	//may be a fork
++	if (pVmaList)
++	{
++		struct PageList *pPages;
++		
++		pVmaList->m_refCount--;
++
++		if (pVmaList->m_refCount == 0)
++		{
++			PRINTK_VERBOSE(KERN_DEBUG "found vma, freeing pages (%s %d)\n",
++				current->comm, current->pid);
++
++			pPages = pVmaList->m_pPageHead;
++
++			if (!pPages)
++			{
++				PRINTK(KERN_ERR "no page list (%s %d)!\n",
++					current->comm, current->pid);
++				return;
++			}
++
++			while (pPages)
++			{
++				struct PageList *next;
++				int count;
++
++				PRINTK_VERBOSE(KERN_DEBUG "page list (%s %d)\n",
++					current->comm, current->pid);
++
++				next = pPages->m_pNext;
++				for (count = 0; count < pPages->m_used; count++)
++				{
++					PRINTK_VERBOSE(KERN_DEBUG "freeing page %p (%s %d)\n",
++						pPages->m_pPages[count],
++						current->comm, current->pid);
++					__free_pages(pPages->m_pPages[count], 0);
++					g_trackedPages--;
++					freed++;
++				}
++
++				PRINTK_VERBOSE(KERN_DEBUG "freeing page list (%s %d)\n",
++					current->comm, current->pid);
++				kfree(pPages);
++				pPages = next;
++			}
++			
++			//remove our vma from the list
++			kfree(pVmaList);
++			pVma->vm_private_data = 0;
++		}
++		else
++		{
++			PRINTK_VERBOSE(KERN_DEBUG "ref count is %d, not closing\n", pVmaList->m_refCount);
++		}
++	}
++	else
++	{
++		PRINTK_VERBOSE(KERN_ERR "uh-oh, vma %p not found (%s %d)!\n", pVma, current->comm, current->pid);
++		PRINTK_VERBOSE(KERN_ERR "CLOSE ERR\n");
++	}
++
++	PRINTK_VERBOSE(KERN_DEBUG "CLOSE %p %d %d pages (tracked pages %d)",
++		pVma, current->pid, freed, g_trackedPages);
++
++	PRINTK_VERBOSE(KERN_DEBUG "%d pages open\n", g_trackedPages);
++}
++
++static int VmaFault4k(struct vm_area_struct *pVma, struct vm_fault *pVmf)
++{
++	PRINTK_VERBOSE(KERN_DEBUG "vma fault for vma %p private %p at offset %ld (%s %d)\n", pVma, pVma->vm_private_data, pVmf->pgoff,
++		current->comm, current->pid);
++	PRINTK_VERBOSE(KERN_DEBUG "FAULT\n");
++	pVmf->page = alloc_page(GFP_KERNEL);
++	
++	if (pVmf->page)
++	{
++		PRINTK_VERBOSE(KERN_DEBUG "alloc page virtual %p\n", page_address(pVmf->page));
++	}
++
++	if (!pVmf->page)
++	{
++		PRINTK(KERN_ERR "vma fault oom (%s %d)\n", current->comm, current->pid);
++		return VM_FAULT_OOM;
++	}
++	else
++	{
++		struct VmaPageList *pVmaList;
++		
++		get_page(pVmf->page);
++		g_trackedPages++;
++		
++		//find our vma in the list
++		pVmaList = (struct VmaPageList *)pVma->vm_private_data;
++		
++		if (pVmaList)
++		{
++			PRINTK_VERBOSE(KERN_DEBUG "vma found (%s %d)\n", current->comm, current->pid);
++
++			if (pVmaList->m_pPageTail->m_used == PAGES_PER_LIST)
++			{
++				PRINTK_VERBOSE(KERN_DEBUG "making new page list (%s %d)\n", current->comm, current->pid);
++				//making a new page list
++				pVmaList->m_pPageTail->m_pNext = (struct PageList *)kmalloc(sizeof(struct PageList), GFP_KERNEL);
++				if (!pVmaList->m_pPageTail->m_pNext)
++					return -ENOMEM;
++				
++				//update the tail pointer
++				pVmaList->m_pPageTail = pVmaList->m_pPageTail->m_pNext;
++				pVmaList->m_pPageTail->m_used = 0;
++				pVmaList->m_pPageTail->m_pNext = 0;
++			}
++
++			PRINTK_VERBOSE(KERN_DEBUG "adding page to list (%s %d)\n", current->comm, current->pid);
++			
++			pVmaList->m_pPageTail->m_pPages[pVmaList->m_pPageTail->m_used] = pVmf->page;
++			pVmaList->m_pPageTail->m_used++;
++		}
++		else
++			PRINTK(KERN_ERR "returned page for vma we don\'t know %p (%s %d)\n", pVma, current->comm, current->pid);
++		
++		return 0;
++	}
++}
++
++/****** GENERIC FUNCTIONS ******/
++static int __init dmaer_init(void)
++{
++	int result = alloc_chrdev_region(&g_majorMinor, 0, 1, "dmaer");
++	if (result < 0)
++	{
++		PRINTK(KERN_ERR "unable to get major device number\n");
++		return result;
++	}
++	else
++		PRINTK(KERN_DEBUG "major device number %d\n", MAJOR(g_majorMinor));
++	
++	PRINTK(KERN_DEBUG "vma list size %d, page list size %d, page size %ld\n",
++		sizeof(struct VmaPageList), sizeof(struct PageList), PAGE_SIZE);
++
++	//get a dma channel to work with
++	result = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST, (void **)&g_pDmaChanBase, &g_dmaIrq);
++
++	//uncomment to force to channel 0
++	//result = 0;
++	//g_pDmaChanBase = 0xce808000;
++	
++	if (result < 0)
++	{
++		PRINTK(KERN_ERR "failed to allocate dma channel\n");
++		cdev_del(&g_cDev);
++		unregister_chrdev_region(g_majorMinor, 1);
++	}
++	
++	//reset the channel
++	PRINTK(KERN_DEBUG "allocated dma channel %d (%p), initial state %08x\n", result, g_pDmaChanBase, *g_pDmaChanBase);
++	*g_pDmaChanBase = 1 << 31;
++	PRINTK(KERN_DEBUG "post-reset %08x\n", *g_pDmaChanBase);
++	
++	g_dmaChan = result;
++
++	//clear the cache stats
++	g_cacheHit = 0;
++	g_cacheMiss = 0;
++
++	//register our device - after this we are go go go
++	cdev_init(&g_cDev, &g_fOps);
++	g_cDev.owner = THIS_MODULE;
++	g_cDev.ops = &g_fOps;
++	
++	result = cdev_add(&g_cDev, g_majorMinor, 1);
++	if (result < 0)
++	{
++		PRINTK(KERN_ERR "failed to add character device\n");
++		unregister_chrdev_region(g_majorMinor, 1);
++		bcm_dma_chan_free(g_dmaChan);
++		return result;
++	}
++		
++	return 0;
++}
++
++static void __exit dmaer_exit(void)
++{
++	PRINTK(KERN_INFO "closing dmaer device, cache stats: %d hits %d misses\n", g_cacheHit, g_cacheMiss);
++	//unregister the device
++	cdev_del(&g_cDev);
++	unregister_chrdev_region(g_majorMinor, 1);
++	//free the dma channel
++	bcm_dma_chan_free(g_dmaChan);
++}
++
++MODULE_LICENSE("Dual BSD/GPL");
++MODULE_AUTHOR("Simon Hall");
++module_init(dmaer_init);
++module_exit(dmaer_exit);
++
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/arm_control.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/arm_control.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/arm_control.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/arm_control.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,419 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/arm_control.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __BCM2708_ARM_CONTROL_H
++#define __BCM2708_ARM_CONTROL_H
++
++/*
++ * Definitions and addresses for the ARM CONTROL logic
++ * This file is manually generated.
++ */
++
++#define ARM_BASE  0x7E00B000
++
++/* Basic configuration */
++#define ARM_CONTROL0  HW_REGISTER_RW(ARM_BASE+0x000)
++#define ARM_C0_SIZ128M   0x00000000
++#define ARM_C0_SIZ256M   0x00000001
++#define ARM_C0_SIZ512M   0x00000002
++#define ARM_C0_SIZ1G     0x00000003
++#define ARM_C0_BRESP0    0x00000000
++#define ARM_C0_BRESP1    0x00000004
++#define ARM_C0_BRESP2    0x00000008
++#define ARM_C0_BOOTHI    0x00000010
++#define ARM_C0_UNUSED05  0x00000020 /* free */
++#define ARM_C0_FULLPERI  0x00000040
++#define ARM_C0_UNUSED78  0x00000180 /* free */
++#define ARM_C0_JTAGMASK  0x00000E00
++#define ARM_C0_JTAGOFF   0x00000000
++#define ARM_C0_JTAGBASH  0x00000800 /* Debug on GPIO off */
++#define ARM_C0_JTAGGPIO  0x00000C00 /* Debug on GPIO on */
++#define ARM_C0_APROTMSK  0x0000F000
++#define ARM_C0_DBG0SYNC  0x00010000 /* VPU0 halt sync */
++#define ARM_C0_DBG1SYNC  0x00020000 /* VPU1 halt sync */
++#define ARM_C0_SWDBGREQ  0x00040000 /* HW debug request */
++#define ARM_C0_PASSHALT  0x00080000 /* ARM halt passed to debugger */
++#define ARM_C0_PRIO_PER  0x00F00000 /* per priority mask */
++#define ARM_C0_PRIO_L2   0x0F000000
++#define ARM_C0_PRIO_UC   0xF0000000
++
++#define ARM_C0_APROTPASS  0x0000A000 /* Translate 1:1 */
++#define ARM_C0_APROTUSER  0x00000000 /* Only user mode */
++#define ARM_C0_APROTSYST  0x0000F000 /* Only system mode */
++
++
++#define ARM_CONTROL1  HW_REGISTER_RW(ARM_BASE+0x440)
++#define ARM_C1_TIMER     0x00000001 /* re-route timer IRQ  to VC */
++#define ARM_C1_MAIL      0x00000002 /* re-route Mail IRQ   to VC */
++#define ARM_C1_BELL0     0x00000004 /* re-route Doorbell 0 to VC */
++#define ARM_C1_BELL1     0x00000008 /* re-route Doorbell 1 to VC */
++#define ARM_C1_PERSON    0x00000100 /* peripherals on */
++#define ARM_C1_REQSTOP   0x00000200 /* ASYNC bridge request stop */
++
++#define ARM_STATUS    HW_REGISTER_RW(ARM_BASE+0x444)
++#define ARM_S_ACKSTOP    0x80000000 /* Bridge stopped */
++#define ARM_S_READPEND   0x000003FF /* pending reads counter */
++#define ARM_S_WRITPEND   0x000FFC00 /* pending writes counter */
++
++#define ARM_ERRHALT   HW_REGISTER_RW(ARM_BASE+0x448)
++#define ARM_EH_PERIBURST  0x00000001 /* Burst write seen on peri bus */
++#define ARM_EH_ILLADDRS1  0x00000002 /* Address bits 25-27 error */
++#define ARM_EH_ILLADDRS2  0x00000004 /* Address bits 31-28 error */
++#define ARM_EH_VPU0HALT   0x00000008 /* VPU0 halted & in debug mode */
++#define ARM_EH_VPU1HALT   0x00000010 /* VPU1 halted & in debug mode */
++#define ARM_EH_ARMHALT    0x00000020 /* ARM in halted debug mode */
++
++#define ARM_ID_SECURE HW_REGISTER_RW(ARM_BASE+0x00C)
++#define ARM_ID        HW_REGISTER_RW(ARM_BASE+0x44C)
++#define ARM_IDVAL        0x364D5241
++
++/* Translation memory */
++#define ARM_TRANSLATE HW_REGISTER_RW(ARM_BASE+0x100)
++/* 32 locations: 0x100.. 0x17F */
++/* 32 spare means we CAN go to 64 pages.... */
++
++
++/* Interrupts */
++#define ARM_IRQ_PEND0 HW_REGISTER_RW(ARM_BASE+0x200)        /* Top IRQ bits */
++#define ARM_I0_TIMER    0x00000001 /* timer IRQ */
++#define ARM_I0_MAIL     0x00000002 /* Mail IRQ */
++#define ARM_I0_BELL0    0x00000004 /* Doorbell 0 */
++#define ARM_I0_BELL1    0x00000008 /* Doorbell 1 */
++#define ARM_I0_BANK1    0x00000100 /* Bank1 IRQ */
++#define ARM_I0_BANK2    0x00000200 /* Bank2 IRQ */
++
++#define ARM_IRQ_PEND1 HW_REGISTER_RW(ARM_BASE+0x204) /* All bank1 IRQ bits */
++/* todo: all I1_interrupt sources */
++#define ARM_IRQ_PEND2 HW_REGISTER_RW(ARM_BASE+0x208) /* All bank2 IRQ bits */
++/* todo: all I2_interrupt sources */
++
++#define ARM_IRQ_FAST  HW_REGISTER_RW(ARM_BASE+0x20C) /* FIQ control */
++#define ARM_IF_INDEX    0x0000007F     /* FIQ select */
++#define ARM_IF_ENABLE   0x00000080     /* FIQ enable */
++#define ARM_IF_VCMASK   0x0000003F     /* FIQ = (index from VC source) */
++#define ARM_IF_TIMER    0x00000040     /* FIQ = ARM timer */
++#define ARM_IF_MAIL     0x00000041     /* FIQ = ARM Mail */
++#define ARM_IF_BELL0    0x00000042     /* FIQ = ARM Doorbell 0 */
++#define ARM_IF_BELL1    0x00000043     /* FIQ = ARM Doorbell 1 */
++#define ARM_IF_VP0HALT  0x00000044     /* FIQ = VPU0 Halt seen */
++#define ARM_IF_VP1HALT  0x00000045     /* FIQ = VPU1 Halt seen */
++#define ARM_IF_ILLEGAL  0x00000046     /* FIQ = Illegal access seen */
++
++#define ARM_IRQ_ENBL1 HW_REGISTER_RW(ARM_BASE+0x210) /* Bank1 enable bits */
++#define ARM_IRQ_ENBL2 HW_REGISTER_RW(ARM_BASE+0x214) /* Bank2 enable bits */
++#define ARM_IRQ_ENBL3 HW_REGISTER_RW(ARM_BASE+0x218) /* ARM irqs enable bits */
++#define ARM_IRQ_DIBL1 HW_REGISTER_RW(ARM_BASE+0x21C) /* Bank1 disable bits */
++#define ARM_IRQ_DIBL2 HW_REGISTER_RW(ARM_BASE+0x220) /* Bank2 disable bits */
++#define ARM_IRQ_DIBL3 HW_REGISTER_RW(ARM_BASE+0x224) /* ARM irqs disable bits */
++#define ARM_IE_TIMER    0x00000001     /* Timer IRQ */
++#define ARM_IE_MAIL     0x00000002     /* Mail IRQ */
++#define ARM_IE_BELL0    0x00000004     /* Doorbell 0 */
++#define ARM_IE_BELL1    0x00000008     /* Doorbell 1 */
++#define ARM_IE_VP0HALT  0x00000010     /* VPU0 Halt */
++#define ARM_IE_VP1HALT  0x00000020     /* VPU1 Halt */
++#define ARM_IE_ILLEGAL  0x00000040     /* Illegal access seen */
++
++/* Timer */
++/* For reg. fields see sp804 spec. */
++#define ARM_T_LOAD    HW_REGISTER_RW(ARM_BASE+0x400)
++#define ARM_T_VALUE   HW_REGISTER_RW(ARM_BASE+0x404)
++#define ARM_T_CONTROL HW_REGISTER_RW(ARM_BASE+0x408)
++#define ARM_T_IRQCNTL HW_REGISTER_RW(ARM_BASE+0x40C)
++#define ARM_T_RAWIRQ  HW_REGISTER_RW(ARM_BASE+0x410)
++#define ARM_T_MSKIRQ  HW_REGISTER_RW(ARM_BASE+0x414)
++#define ARM_T_RELOAD  HW_REGISTER_RW(ARM_BASE+0x418)
++#define ARM_T_PREDIV  HW_REGISTER_RW(ARM_BASE+0x41c)
++#define ARM_T_FREECNT HW_REGISTER_RW(ARM_BASE+0x420)
++
++#define TIMER_CTRL_ONESHOT  (1 << 0)
++#define TIMER_CTRL_32BIT    (1 << 1)
++#define TIMER_CTRL_DIV1     (0 << 2)
++#define TIMER_CTRL_DIV16    (1 << 2)
++#define TIMER_CTRL_DIV256   (2 << 2)
++#define TIMER_CTRL_IE       (1 << 5)
++#define TIMER_CTRL_PERIODIC (1 << 6)
++#define TIMER_CTRL_ENABLE   (1 << 7)
++#define TIMER_CTRL_DBGHALT  (1 << 8)
++#define TIMER_CTRL_ENAFREE  (1 << 9)
++#define TIMER_CTRL_FREEDIV_SHIFT 16)
++#define TIMER_CTRL_FREEDIV_MASK  0xff
++
++/* Semaphores, Doorbells, Mailboxes */
++#define ARM_SBM_OWN0  (ARM_BASE+0x800)
++#define ARM_SBM_OWN1  (ARM_BASE+0x900)
++#define ARM_SBM_OWN2  (ARM_BASE+0xA00)
++#define ARM_SBM_OWN3  (ARM_BASE+0xB00)
++
++/* MAILBOXES
++ * Register flags are common across all
++ * owner registers. See end of this section
++ *
++ * Semaphores, Doorbells, Mailboxes Owner 0
++ *
++ */
++
++#define ARM_0_SEMS       HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
++#define ARM_0_SEM0       HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
++#define ARM_0_SEM1       HW_REGISTER_RW(ARM_SBM_OWN0+0x04)
++#define ARM_0_SEM2       HW_REGISTER_RW(ARM_SBM_OWN0+0x08)
++#define ARM_0_SEM3       HW_REGISTER_RW(ARM_SBM_OWN0+0x0C)
++#define ARM_0_SEM4       HW_REGISTER_RW(ARM_SBM_OWN0+0x10)
++#define ARM_0_SEM5       HW_REGISTER_RW(ARM_SBM_OWN0+0x14)
++#define ARM_0_SEM6       HW_REGISTER_RW(ARM_SBM_OWN0+0x18)
++#define ARM_0_SEM7       HW_REGISTER_RW(ARM_SBM_OWN0+0x1C)
++#define ARM_0_BELL0      HW_REGISTER_RW(ARM_SBM_OWN0+0x40)
++#define ARM_0_BELL1      HW_REGISTER_RW(ARM_SBM_OWN0+0x44)
++#define ARM_0_BELL2      HW_REGISTER_RW(ARM_SBM_OWN0+0x48)
++#define ARM_0_BELL3      HW_REGISTER_RW(ARM_SBM_OWN0+0x4C)
++/* MAILBOX 0 access in Owner 0 area */
++/* Some addresses should ONLY be used by owner 0 */
++#define ARM_0_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN0+0x80)  /* .. 0x8C (4 locations) */
++#define ARM_0_MAIL0_RD   HW_REGISTER_RW(ARM_SBM_OWN0+0x80)  /* .. 0x8C (4 locations) Normal read */
++#define ARM_0_MAIL0_POL  HW_REGISTER_RW(ARM_SBM_OWN0+0x90)  /* none-pop read */
++#define ARM_0_MAIL0_SND  HW_REGISTER_RW(ARM_SBM_OWN0+0x94)  /* Sender read (only LS 2 bits) */
++#define ARM_0_MAIL0_STA  HW_REGISTER_RW(ARM_SBM_OWN0+0x98)  /* Status read */
++#define ARM_0_MAIL0_CNF  HW_REGISTER_RW(ARM_SBM_OWN0+0x9C)  /* Config read/write */
++/* MAILBOX 1 access in Owner 0 area */
++/* Owner 0 should only WRITE to this mailbox */
++#define ARM_0_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN0+0xA0)   /* .. 0xAC (4 locations) */
++/*#define ARM_0_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_0_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN0+0xB0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_0_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN0+0xB4) */ /* DO NOT USE THIS !!!!! */
++#define ARM_0_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN0+0xB8)   /* Status read */
++/*#define ARM_0_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN0+0xBC) */ /* DO NOT USE THIS !!!!! */
++/* General SEM, BELL, MAIL config/status */
++#define ARM_0_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN0+0xE0)  /* semaphore clear/debug register */
++#define ARM_0_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN0+0xE4)  /* Doorbells clear/debug register */
++#define ARM_0_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN0+0xF8)  /* ALL interrupts */
++#define ARM_0_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN0+0xFC)  /* IRQS pending for owner 0 */
++
++/* Semaphores, Doorbells, Mailboxes Owner 1 */
++#define ARM_1_SEMS       HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
++#define ARM_1_SEM0       HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
++#define ARM_1_SEM1       HW_REGISTER_RW(ARM_SBM_OWN1+0x04)
++#define ARM_1_SEM2       HW_REGISTER_RW(ARM_SBM_OWN1+0x08)
++#define ARM_1_SEM3       HW_REGISTER_RW(ARM_SBM_OWN1+0x0C)
++#define ARM_1_SEM4       HW_REGISTER_RW(ARM_SBM_OWN1+0x10)
++#define ARM_1_SEM5       HW_REGISTER_RW(ARM_SBM_OWN1+0x14)
++#define ARM_1_SEM6       HW_REGISTER_RW(ARM_SBM_OWN1+0x18)
++#define ARM_1_SEM7       HW_REGISTER_RW(ARM_SBM_OWN1+0x1C)
++#define ARM_1_BELL0      HW_REGISTER_RW(ARM_SBM_OWN1+0x40)
++#define ARM_1_BELL1      HW_REGISTER_RW(ARM_SBM_OWN1+0x44)
++#define ARM_1_BELL2      HW_REGISTER_RW(ARM_SBM_OWN1+0x48)
++#define ARM_1_BELL3      HW_REGISTER_RW(ARM_SBM_OWN1+0x4C)
++/* MAILBOX 0 access in Owner 0 area */
++/* Owner 1 should only WRITE to this mailbox */
++#define ARM_1_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN1+0x80)  /* .. 0x8C (4 locations) */
++/*#define ARM_1_MAIL0_RD  HW_REGISTER_RW(ARM_SBM_OWN1+0x80) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_1_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN1+0x90) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_1_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN1+0x94) */ /* DO NOT USE THIS !!!!! */
++#define ARM_1_MAIL0_STA  HW_REGISTER_RW(ARM_SBM_OWN1+0x98)  /* Status read */
++/*#define ARM_1_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0x9C) */ /* DO NOT USE THIS !!!!! */
++/* MAILBOX 1 access in Owner 0 area */
++#define ARM_1_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN1+0xA0)  /* .. 0xAC (4 locations) */
++#define ARM_1_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN1+0xA0)  /* .. 0xAC (4 locations) Normal read */
++#define ARM_1_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN1+0xB0)  /* none-pop read */
++#define ARM_1_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN1+0xB4)  /* Sender read (only LS 2 bits) */
++#define ARM_1_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN1+0xB8)  /* Status read */
++#define ARM_1_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN1+0xBC)
++/* General SEM, BELL, MAIL config/status */
++#define ARM_1_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN1+0xE0)  /* semaphore clear/debug register */
++#define ARM_1_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN1+0xE4)  /* Doorbells clear/debug register */
++#define ARM_1_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN1+0xFC)  /* IRQS pending for owner 1 */
++#define ARM_1_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN1+0xF8)  /* ALL interrupts */
++
++/* Semaphores, Doorbells, Mailboxes Owner 2 */
++#define ARM_2_SEMS       HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
++#define ARM_2_SEM0       HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
++#define ARM_2_SEM1       HW_REGISTER_RW(ARM_SBM_OWN2+0x04)
++#define ARM_2_SEM2       HW_REGISTER_RW(ARM_SBM_OWN2+0x08)
++#define ARM_2_SEM3       HW_REGISTER_RW(ARM_SBM_OWN2+0x0C)
++#define ARM_2_SEM4       HW_REGISTER_RW(ARM_SBM_OWN2+0x10)
++#define ARM_2_SEM5       HW_REGISTER_RW(ARM_SBM_OWN2+0x14)
++#define ARM_2_SEM6       HW_REGISTER_RW(ARM_SBM_OWN2+0x18)
++#define ARM_2_SEM7       HW_REGISTER_RW(ARM_SBM_OWN2+0x1C)
++#define ARM_2_BELL0      HW_REGISTER_RW(ARM_SBM_OWN2+0x40)
++#define ARM_2_BELL1      HW_REGISTER_RW(ARM_SBM_OWN2+0x44)
++#define ARM_2_BELL2      HW_REGISTER_RW(ARM_SBM_OWN2+0x48)
++#define ARM_2_BELL3      HW_REGISTER_RW(ARM_SBM_OWN2+0x4C)
++/* MAILBOX 0 access in Owner 2 area */
++/* Owner 2 should only WRITE to this mailbox */
++#define ARM_2_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN2+0x80)   /* .. 0x8C (4 locations) */
++/*#define ARM_2_MAIL0_RD  HW_REGISTER_RW(ARM_SBM_OWN2+0x80)  */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_2_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN2+0x90)  */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_2_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN2+0x94)  */ /* DO NOT USE THIS !!!!! */
++#define ARM_2_MAIL0_STA  HW_REGISTER_RW(ARM_SBM_OWN2+0x98)   /* Status read */
++/*#define ARM_2_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0x9C)  */ /* DO NOT USE THIS !!!!! */
++/* MAILBOX 1 access in Owner 2 area */
++/* Owner 2 should only WRITE to this mailbox */
++#define ARM_2_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN2+0xA0)   /* .. 0xAC (4 locations) */
++/*#define ARM_2_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_2_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN2+0xB0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_2_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN2+0xB4) */ /* DO NOT USE THIS !!!!! */
++#define ARM_2_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN2+0xB8)   /* Status read */
++/*#define ARM_2_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN2+0xBC) */ /* DO NOT USE THIS !!!!! */
++/* General SEM, BELL, MAIL config/status */
++#define ARM_2_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN2+0xE0)  /* semaphore clear/debug register */
++#define ARM_2_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN2+0xE4)  /* Doorbells clear/debug register */
++#define ARM_2_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN2+0xFC)  /* IRQS pending for owner 2 */
++#define ARM_2_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN2+0xF8)  /* ALL interrupts */
++
++/* Semaphores, Doorbells, Mailboxes Owner 3 */
++#define ARM_3_SEMS       HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
++#define ARM_3_SEM0       HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
++#define ARM_3_SEM1       HW_REGISTER_RW(ARM_SBM_OWN3+0x04)
++#define ARM_3_SEM2       HW_REGISTER_RW(ARM_SBM_OWN3+0x08)
++#define ARM_3_SEM3       HW_REGISTER_RW(ARM_SBM_OWN3+0x0C)
++#define ARM_3_SEM4       HW_REGISTER_RW(ARM_SBM_OWN3+0x10)
++#define ARM_3_SEM5       HW_REGISTER_RW(ARM_SBM_OWN3+0x14)
++#define ARM_3_SEM6       HW_REGISTER_RW(ARM_SBM_OWN3+0x18)
++#define ARM_3_SEM7       HW_REGISTER_RW(ARM_SBM_OWN3+0x1C)
++#define ARM_3_BELL0      HW_REGISTER_RW(ARM_SBM_OWN3+0x40)
++#define ARM_3_BELL1      HW_REGISTER_RW(ARM_SBM_OWN3+0x44)
++#define ARM_3_BELL2      HW_REGISTER_RW(ARM_SBM_OWN3+0x48)
++#define ARM_3_BELL3      HW_REGISTER_RW(ARM_SBM_OWN3+0x4C)
++/* MAILBOX 0 access in Owner 3 area */
++/* Owner 3 should only WRITE to this mailbox */
++#define ARM_3_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN3+0x80)   /* .. 0x8C (4 locations) */
++/*#define ARM_3_MAIL0_RD  HW_REGISTER_RW(ARM_SBM_OWN3+0x80)  */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_3_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN3+0x90)  */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_3_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN3+0x94)  */ /* DO NOT USE THIS !!!!! */
++#define ARM_3_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN3+0x98)    /* Status read */
++/*#define ARM_3_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0x9C)  */ /* DO NOT USE THIS !!!!! */
++/* MAILBOX 1 access in Owner 3 area */
++/* Owner 3 should only WRITE to this mailbox */
++#define ARM_3_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN3+0xA0)   /* .. 0xAC (4 locations) */
++/*#define ARM_3_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_3_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN3+0xB0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_3_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN3+0xB4) */ /* DO NOT USE THIS !!!!! */
++#define ARM_3_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN3+0xB8)   /* Status read */
++/*#define ARM_3_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN3+0xBC) */ /* DO NOT USE THIS !!!!! */
++/* General SEM, BELL, MAIL config/status */
++#define ARM_3_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN3+0xE0)  /* semaphore clear/debug register */
++#define ARM_3_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN3+0xE4)  /* Doorbells clear/debug register */
++#define ARM_3_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN3+0xFC)  /* IRQS pending for owner 3 */
++#define ARM_3_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN3+0xF8)  /* ALL interrupts */
++
++
++
++/*  Mailbox flags. Valid for all owners */
++
++/* Mailbox status register (...0x98) */
++#define ARM_MS_FULL       0x80000000
++#define ARM_MS_EMPTY      0x40000000
++#define ARM_MS_LEVEL      0x400000FF /* Max. value depdnds on mailbox depth parameter */
++
++/* MAILBOX config/status register (...0x9C) */
++/* ANY write to this register clears the error bits! */
++#define ARM_MC_IHAVEDATAIRQEN    0x00000001 /* mailbox irq enable:  has data */
++#define ARM_MC_IHAVESPACEIRQEN   0x00000002 /* mailbox irq enable:  has space */
++#define ARM_MC_OPPISEMPTYIRQEN   0x00000004 /* mailbox irq enable: Opp. is empty */
++#define ARM_MC_MAIL_CLEAR        0x00000008 /* mailbox clear write 1, then  0 */
++#define ARM_MC_IHAVEDATAIRQPEND  0x00000010 /* mailbox irq pending:  has space */
++#define ARM_MC_IHAVESPACEIRQPEND 0x00000020 /* mailbox irq pending: Opp. is empty */
++#define ARM_MC_OPPISEMPTYIRQPEND 0x00000040 /* mailbox irq pending */
++/* Bit 7 is unused */
++#define ARM_MC_ERRNOOWN   0x00000100 /* error : none owner read from mailbox */
++#define ARM_MC_ERROVERFLW 0x00000200 /* error : write to fill mailbox */
++#define ARM_MC_ERRUNDRFLW 0x00000400 /* error : read from empty mailbox */
++
++/* Semaphore clear/debug register (...0xE0) */
++#define ARM_SD_OWN0      0x00000003  /* Owner of sem 0 */
++#define ARM_SD_OWN1      0x0000000C  /* Owner of sem 1 */
++#define ARM_SD_OWN2      0x00000030  /* Owner of sem 2 */
++#define ARM_SD_OWN3      0x000000C0  /* Owner of sem 3 */
++#define ARM_SD_OWN4      0x00000300  /* Owner of sem 4 */
++#define ARM_SD_OWN5      0x00000C00  /* Owner of sem 5 */
++#define ARM_SD_OWN6      0x00003000  /* Owner of sem 6 */
++#define ARM_SD_OWN7      0x0000C000  /* Owner of sem 7 */
++#define ARM_SD_SEM0      0x00010000  /* Status of sem 0 */
++#define ARM_SD_SEM1      0x00020000  /* Status of sem 1 */
++#define ARM_SD_SEM2      0x00040000  /* Status of sem 2 */
++#define ARM_SD_SEM3      0x00080000  /* Status of sem 3 */
++#define ARM_SD_SEM4      0x00100000  /* Status of sem 4 */
++#define ARM_SD_SEM5      0x00200000  /* Status of sem 5 */
++#define ARM_SD_SEM6      0x00400000  /* Status of sem 6 */
++#define ARM_SD_SEM7      0x00800000  /* Status of sem 7 */
++
++/* Doorbells clear/debug register (...0xE4) */
++#define ARM_BD_OWN0      0x00000003  /* Owner of doorbell 0 */
++#define ARM_BD_OWN1      0x0000000C  /* Owner of doorbell 1 */
++#define ARM_BD_OWN2      0x00000030  /* Owner of doorbell 2 */
++#define ARM_BD_OWN3      0x000000C0  /* Owner of doorbell 3 */
++#define ARM_BD_BELL0     0x00000100  /* Status of doorbell 0 */
++#define ARM_BD_BELL1     0x00000200  /* Status of doorbell 1 */
++#define ARM_BD_BELL2     0x00000400  /* Status of doorbell 2 */
++#define ARM_BD_BELL3     0x00000800  /* Status of doorbell 3 */
++
++/* MY IRQS register (...0xF8) */
++#define ARM_MYIRQ_BELL   0x00000001  /* This owner has a doorbell IRQ */
++#define ARM_MYIRQ_MAIL   0x00000002  /* This owner has a mailbox  IRQ */
++
++/* ALL IRQS register (...0xF8) */
++#define ARM_AIS_BELL0 0x00000001  /* Doorbell 0 IRQ pending */
++#define ARM_AIS_BELL1 0x00000002  /* Doorbell 1 IRQ pending */
++#define ARM_AIS_BELL2 0x00000004  /* Doorbell 2 IRQ pending */
++#define ARM_AIS_BELL3 0x00000008  /* Doorbell 3 IRQ pending */
++#define ARM_AIS0_HAVEDATA 0x00000010  /* MAIL 0 has data IRQ pending */
++#define ARM_AIS0_HAVESPAC 0x00000020  /* MAIL 0 has space IRQ pending */
++#define ARM_AIS0_OPPEMPTY 0x00000040  /* MAIL 0 opposite is empty IRQ */
++#define ARM_AIS1_HAVEDATA 0x00000080  /* MAIL 1 has data IRQ pending */
++#define ARM_AIS1_HAVESPAC 0x00000100  /* MAIL 1 has space IRQ pending */
++#define ARM_AIS1_OPPEMPTY 0x00000200  /* MAIL 1 opposite is empty IRQ */
++/* Note   that bell-0, bell-1 and MAIL0 IRQ go only to the ARM */
++/* Whilst that bell-2, bell-3 and MAIL1 IRQ go only to the VC */
++/* */
++/* ARM JTAG BASH */
++/* */
++#define AJB_BASE 0x7e2000c0
++
++#define AJBCONF HW_REGISTER_RW(AJB_BASE+0x00)
++#define   AJB_BITS0    0x000000
++#define   AJB_BITS4    0x000004
++#define   AJB_BITS8    0x000008
++#define   AJB_BITS12   0x00000C
++#define   AJB_BITS16   0x000010
++#define   AJB_BITS20   0x000014
++#define   AJB_BITS24   0x000018
++#define   AJB_BITS28   0x00001C
++#define   AJB_BITS32   0x000020
++#define   AJB_BITS34   0x000022
++#define   AJB_OUT_MS   0x000040
++#define   AJB_OUT_LS   0x000000
++#define   AJB_INV_CLK  0x000080
++#define   AJB_D0_RISE  0x000100
++#define   AJB_D0_FALL  0x000000
++#define   AJB_D1_RISE  0x000200
++#define   AJB_D1_FALL  0x000000
++#define   AJB_IN_RISE  0x000400
++#define   AJB_IN_FALL  0x000000
++#define   AJB_ENABLE   0x000800
++#define   AJB_HOLD0    0x000000
++#define   AJB_HOLD1    0x001000
++#define   AJB_HOLD2    0x002000
++#define   AJB_HOLD3    0x003000
++#define   AJB_RESETN   0x004000
++#define   AJB_CLKSHFT  16
++#define   AJB_BUSY     0x80000000
++#define AJBTMS HW_REGISTER_RW(AJB_BASE+0x04)
++#define AJBTDI HW_REGISTER_RW(AJB_BASE+0x08)
++#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c)
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/arm_power.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/arm_power.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/arm_power.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/arm_power.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,60 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/include/mach/arm_power.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef _ARM_POWER_H
++#define _ARM_POWER_H
++
++/* Use meaningful names on each side */
++#ifdef __VIDEOCORE__
++#define PREFIX(x) ARM_##x
++#else
++#define PREFIX(x) BCM_##x
++#endif
++
++enum {
++	PREFIX(POWER_SDCARD_BIT),
++	PREFIX(POWER_UART_BIT),
++	PREFIX(POWER_MINIUART_BIT),
++	PREFIX(POWER_USB_BIT),
++	PREFIX(POWER_I2C0_BIT),
++	PREFIX(POWER_I2C1_BIT),
++	PREFIX(POWER_I2C2_BIT),
++	PREFIX(POWER_SPI_BIT),
++	PREFIX(POWER_CCP2TX_BIT),
++
++	PREFIX(POWER_MAX)
++};
++
++enum {
++	PREFIX(POWER_SDCARD) = (1 << PREFIX(POWER_SDCARD_BIT)),
++	PREFIX(POWER_UART) = (1 << PREFIX(POWER_UART_BIT)),
++	PREFIX(POWER_MINIUART) = (1 << PREFIX(POWER_MINIUART_BIT)),
++	PREFIX(POWER_USB) = (1 << PREFIX(POWER_USB_BIT)),
++	PREFIX(POWER_I2C0) = (1 << PREFIX(POWER_I2C0_BIT)),
++	PREFIX(POWER_I2C1_MASK) = (1 << PREFIX(POWER_I2C1_BIT)),
++	PREFIX(POWER_I2C2_MASK) = (1 << PREFIX(POWER_I2C2_BIT)),
++	PREFIX(POWER_SPI_MASK) = (1 << PREFIX(POWER_SPI_BIT)),
++	PREFIX(POWER_CCP2TX_MASK) = (1 << PREFIX(POWER_CCP2TX_BIT)),
++
++	PREFIX(POWER_MASK) = (1 << PREFIX(POWER_MAX)) - 1,
++	PREFIX(POWER_NONE) = 0
++};
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/clkdev.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/clkdev.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/clkdev.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/clkdev.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,7 @@
++#ifndef __ASM_MACH_CLKDEV_H
++#define __ASM_MACH_CLKDEV_H
++
++#define __clk_get(clk) ({ 1; })
++#define __clk_put(clk) do { } while (0)
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/debug-macro.S linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/debug-macro.S
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/debug-macro.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/debug-macro.S	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,22 @@
++/* arch/arm/mach-bcm2708/include/mach/debug-macro.S
++ *
++ * Debugging macro include header
++ *
++ *  Copyright (C) 2010 Broadcom
++ *  Copyright (C) 1994-1999 Russell King
++ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++*/
++
++#include <mach/platform.h>
++
++		.macro	addruart, rp, rv, tmp
++		ldr	\rp, =UART0_BASE
++		ldr	\rv, =IO_ADDRESS(UART0_BASE)
++		.endm
++
++#include <asm/hardware/debug-pl01x.S>
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/dma.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/dma.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/dma.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/dma.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,86 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/include/mach/dma.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++
++#ifndef _MACH_BCM2708_DMA_H
++#define _MACH_BCM2708_DMA_H
++
++#define BCM_DMAMAN_DRIVER_NAME "bcm2708_dma"
++
++/* DMA CS Control and Status bits */
++#define BCM2708_DMA_ACTIVE	(1 << 0)
++#define BCM2708_DMA_INT		(1 << 2)
++#define BCM2708_DMA_ISPAUSED	(1 << 4)  /* Pause requested or not active */
++#define BCM2708_DMA_ISHELD	(1 << 5)  /* Is held by DREQ flow control */
++#define BCM2708_DMA_ERR		(1 << 8)
++#define BCM2708_DMA_ABORT	(1 << 30) /* stop current CB, go to next, WO */
++#define BCM2708_DMA_RESET	(1 << 31) /* WO, self clearing */
++
++/* DMA control block "info" field bits */
++#define BCM2708_DMA_INT_EN	(1 << 0)
++#define BCM2708_DMA_TDMODE	(1 << 1)
++#define BCM2708_DMA_WAIT_RESP	(1 << 3)
++#define BCM2708_DMA_D_INC	(1 << 4)
++#define BCM2708_DMA_D_WIDTH	(1 << 5)
++#define BCM2708_DMA_D_DREQ	(1 << 6)
++#define BCM2708_DMA_S_INC	(1 << 8)
++#define BCM2708_DMA_S_WIDTH	(1 << 9)
++#define BCM2708_DMA_S_DREQ	(1 << 10)
++
++#define	BCM2708_DMA_BURST(x)	(((x)&0xf) << 12)
++#define	BCM2708_DMA_PER_MAP(x)	((x) << 16)
++#define	BCM2708_DMA_WAITS(x)	(((x)&0x1f) << 21)
++
++#define BCM2708_DMA_DREQ_EMMC	11
++#define BCM2708_DMA_DREQ_SDHOST	13
++
++#define BCM2708_DMA_CS		0x00 /* Control and Status */
++#define BCM2708_DMA_ADDR	0x04
++/* the current control block appears in the following registers - read only */
++#define BCM2708_DMA_INFO	0x08
++#define BCM2708_DMA_NEXTCB	0x1C
++#define BCM2708_DMA_DEBUG	0x20
++
++#define BCM2708_DMA4_CS		(BCM2708_DMA_CHAN(4)+BCM2708_DMA_CS)
++#define BCM2708_DMA4_ADDR	(BCM2708_DMA_CHAN(4)+BCM2708_DMA_ADDR)
++
++#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w))
++
++struct bcm2708_dma_cb {
++	unsigned long info;
++	unsigned long src;
++	unsigned long dst;
++	unsigned long length;
++	unsigned long stride;
++	unsigned long next;
++	unsigned long pad[2];
++};
++
++extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len);
++extern void bcm_dma_start(void __iomem *dma_chan_base,
++			  dma_addr_t control_block);
++extern void bcm_dma_wait_idle(void __iomem *dma_chan_base);
++extern int /*rc*/ bcm_dma_abort(void __iomem *dma_chan_base);
++
++/* When listing features we can ask for when allocating DMA channels give
++   those with higher priority smaller ordinal numbers */
++#define BCM_DMA_FEATURE_FAST_ORD 0
++#define BCM_DMA_FEATURE_BULK_ORD 1
++#define BCM_DMA_FEATURE_FAST	 (1<<BCM_DMA_FEATURE_FAST_ORD)
++#define BCM_DMA_FEATURE_BULK	 (1<<BCM_DMA_FEATURE_BULK_ORD)
++#define BCM_DMA_FEATURE_COUNT	 2
++
++/* return channel no or -ve error */
++extern int bcm_dma_chan_alloc(unsigned preferred_feature_set,
++			      void __iomem **out_dma_base, int *out_dma_irq);
++extern int bcm_dma_chan_free(int channel);
++
++
++#endif /* _MACH_BCM2708_DMA_H */
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/entry-macro.S linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/entry-macro.S
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/entry-macro.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/entry-macro.S	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,69 @@
++/*
++ * arch/arm/mach-bcm2708/include/mach/entry-macro.S
++ *
++ * Low-level IRQ helper macros for BCM2708 platforms
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#include <mach/hardware.h>
++
++		.macro	disable_fiq
++		.endm
++
++		.macro  get_irqnr_preamble, base, tmp
++		ldr	\base, =IO_ADDRESS(ARMCTRL_IC_BASE)
++		.endm
++
++		.macro  arch_ret_to_user, tmp1, tmp2
++		.endm
++
++		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
++		/* get masked status */
++		ldr	\irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)]
++		mov	\irqnr, #(ARM_IRQ0_BASE + 31)
++		and	\tmp, \irqstat, #0x300		 @ save bits 8 and 9
++		/* clear bits 8 and 9, and test */
++		bics	\irqstat, \irqstat, #0x300
++		bne	1010f
++
++		tst	\tmp, #0x100
++		ldrne	\irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)]
++		movne \irqnr, #(ARM_IRQ1_BASE + 31)
++		@ Mask out the interrupts also present in PEND0 - see SW-5809
++		bicne \irqstat, #((1<<7) | (1<<9) | (1<<10))
++		bicne \irqstat, #((1<<18) | (1<<19))
++		bne	1010f
++
++		tst	\tmp, #0x200
++		ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)]
++		movne \irqnr, #(ARM_IRQ2_BASE + 31)
++		@ Mask out the interrupts also present in PEND0 - see SW-5809
++		bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25))
++		bicne \irqstat, #((1<<30))
++		beq 1020f
++
++1010:
++		@ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1))
++		@ N.B. CLZ is an ARM5 instruction.
++		sub	\tmp, \irqstat, #1
++		eor	\irqstat, \irqstat, \tmp
++		clz	\tmp, \irqstat
++		sub	\irqnr, \tmp
++
++1020:	@ EQ will be set if no irqs pending
++
++		.endm
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/frc.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/frc.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/frc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/frc.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,38 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/timex.h
++ *
++ *  BCM2708 free running counter (timer)
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef _MACH_FRC_H
++#define _MACH_FRC_H
++
++#define FRC_TICK_RATE		(1000000)
++
++/*! Free running counter incrementing at the CLOCK_TICK_RATE
++    (slightly faster than frc_clock_ticks63()
++ */
++extern unsigned long frc_clock_ticks32(void);
++
++/*! Free running counter incrementing at the CLOCK_TICK_RATE
++ *  Note - top bit should be ignored (see cnt32_to_63)
++ */
++extern unsigned long long frc_clock_ticks63(void);
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/gpio.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/gpio.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/gpio.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/gpio.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,18 @@
++/*
++ * arch/arm/mach-bcm2708/include/mach/gpio.h
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef __ASM_ARCH_GPIO_H
++#define __ASM_ARCH_GPIO_H
++
++#define ARCH_NR_GPIOS 54 // number of gpio lines
++
++#define gpio_to_irq(x)	((x) + GPIO_IRQ_START)
++#define irq_to_gpio(x)	((x) - GPIO_IRQ_START)
++
++#endif
++
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/hardware.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/hardware.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/hardware.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/hardware.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,28 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/hardware.h
++ *
++ *  This file contains the hardware definitions of the BCM2708 devices.
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ASM_ARCH_HARDWARE_H
++#define __ASM_ARCH_HARDWARE_H
++
++#include <asm/sizes.h>
++#include <mach/platform.h>
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/io.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/io.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/io.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/io.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,27 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/io.h
++ *
++ *  Copyright (C) 2003 ARM Limited
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ASM_ARM_ARCH_IO_H
++#define __ASM_ARM_ARCH_IO_H
++
++#define IO_SPACE_LIMIT 0xffffffff
++
++#define __io(a)		__typesafe_io(a)
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/irqs.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/irqs.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/irqs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/irqs.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,199 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/irqs.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *  Copyright (C) 2003 ARM Limited
++ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef _BCM2708_IRQS_H_
++#define _BCM2708_IRQS_H_
++
++#include <mach/platform.h>
++
++/*
++ *  IRQ interrupts definitions are the same as the INT definitions
++ *  held within platform.h
++ */
++#define IRQ_ARMCTRL_START     0
++#define IRQ_TIMER0            (IRQ_ARMCTRL_START + INTERRUPT_TIMER0)
++#define IRQ_TIMER1            (IRQ_ARMCTRL_START + INTERRUPT_TIMER1)
++#define IRQ_TIMER2            (IRQ_ARMCTRL_START + INTERRUPT_TIMER2)
++#define IRQ_TIMER3            (IRQ_ARMCTRL_START + INTERRUPT_TIMER3)
++#define IRQ_CODEC0            (IRQ_ARMCTRL_START + INTERRUPT_CODEC0)
++#define IRQ_CODEC1            (IRQ_ARMCTRL_START + INTERRUPT_CODEC1)
++#define IRQ_CODEC2            (IRQ_ARMCTRL_START + INTERRUPT_CODEC2)
++#define IRQ_JPEG              (IRQ_ARMCTRL_START + INTERRUPT_JPEG)
++#define IRQ_ISP               (IRQ_ARMCTRL_START + INTERRUPT_ISP)
++#define IRQ_USB               (IRQ_ARMCTRL_START + INTERRUPT_USB)
++#define IRQ_3D                (IRQ_ARMCTRL_START + INTERRUPT_3D)
++#define IRQ_TRANSPOSER        (IRQ_ARMCTRL_START + INTERRUPT_TRANSPOSER)
++#define IRQ_MULTICORESYNC0    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC0)
++#define IRQ_MULTICORESYNC1    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC1)
++#define IRQ_MULTICORESYNC2    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC2)
++#define IRQ_MULTICORESYNC3    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC3)
++#define IRQ_DMA0              (IRQ_ARMCTRL_START + INTERRUPT_DMA0)
++#define IRQ_DMA1              (IRQ_ARMCTRL_START + INTERRUPT_DMA1)
++#define IRQ_DMA2              (IRQ_ARMCTRL_START + INTERRUPT_DMA2)
++#define IRQ_DMA3              (IRQ_ARMCTRL_START + INTERRUPT_DMA3)
++#define IRQ_DMA4              (IRQ_ARMCTRL_START + INTERRUPT_DMA4)
++#define IRQ_DMA5              (IRQ_ARMCTRL_START + INTERRUPT_DMA5)
++#define IRQ_DMA6              (IRQ_ARMCTRL_START + INTERRUPT_DMA6)
++#define IRQ_DMA7              (IRQ_ARMCTRL_START + INTERRUPT_DMA7)
++#define IRQ_DMA8              (IRQ_ARMCTRL_START + INTERRUPT_DMA8)
++#define IRQ_DMA9              (IRQ_ARMCTRL_START + INTERRUPT_DMA9)
++#define IRQ_DMA10             (IRQ_ARMCTRL_START + INTERRUPT_DMA10)
++#define IRQ_DMA11             (IRQ_ARMCTRL_START + INTERRUPT_DMA11)
++#define IRQ_DMA12             (IRQ_ARMCTRL_START + INTERRUPT_DMA12)
++#define IRQ_AUX               (IRQ_ARMCTRL_START + INTERRUPT_AUX)
++#define IRQ_ARM               (IRQ_ARMCTRL_START + INTERRUPT_ARM)
++#define IRQ_VPUDMA            (IRQ_ARMCTRL_START + INTERRUPT_VPUDMA)
++#define IRQ_HOSTPORT          (IRQ_ARMCTRL_START + INTERRUPT_HOSTPORT)
++#define IRQ_VIDEOSCALER       (IRQ_ARMCTRL_START + INTERRUPT_VIDEOSCALER)
++#define IRQ_CCP2TX            (IRQ_ARMCTRL_START + INTERRUPT_CCP2TX)
++#define IRQ_SDC               (IRQ_ARMCTRL_START + INTERRUPT_SDC)
++#define IRQ_DSI0              (IRQ_ARMCTRL_START + INTERRUPT_DSI0)
++#define IRQ_AVE               (IRQ_ARMCTRL_START + INTERRUPT_AVE)
++#define IRQ_CAM0              (IRQ_ARMCTRL_START + INTERRUPT_CAM0)
++#define IRQ_CAM1              (IRQ_ARMCTRL_START + INTERRUPT_CAM1)
++#define IRQ_HDMI0             (IRQ_ARMCTRL_START + INTERRUPT_HDMI0)
++#define IRQ_HDMI1             (IRQ_ARMCTRL_START + INTERRUPT_HDMI1)
++#define IRQ_PIXELVALVE1       (IRQ_ARMCTRL_START + INTERRUPT_PIXELVALVE1)
++#define IRQ_I2CSPISLV         (IRQ_ARMCTRL_START + INTERRUPT_I2CSPISLV)
++#define IRQ_DSI1              (IRQ_ARMCTRL_START + INTERRUPT_DSI1)
++#define IRQ_PWA0              (IRQ_ARMCTRL_START + INTERRUPT_PWA0)
++#define IRQ_PWA1              (IRQ_ARMCTRL_START + INTERRUPT_PWA1)
++#define IRQ_CPR               (IRQ_ARMCTRL_START + INTERRUPT_CPR)
++#define IRQ_SMI               (IRQ_ARMCTRL_START + INTERRUPT_SMI)
++#define IRQ_GPIO0             (IRQ_ARMCTRL_START + INTERRUPT_GPIO0)
++#define IRQ_GPIO1             (IRQ_ARMCTRL_START + INTERRUPT_GPIO1)
++#define IRQ_GPIO2             (IRQ_ARMCTRL_START + INTERRUPT_GPIO2)
++#define IRQ_GPIO3             (IRQ_ARMCTRL_START + INTERRUPT_GPIO3)
++#define IRQ_I2C               (IRQ_ARMCTRL_START + INTERRUPT_I2C)
++#define IRQ_SPI               (IRQ_ARMCTRL_START + INTERRUPT_SPI)
++#define IRQ_I2SPCM            (IRQ_ARMCTRL_START + INTERRUPT_I2SPCM)
++#define IRQ_SDIO              (IRQ_ARMCTRL_START + INTERRUPT_SDIO)
++#define IRQ_UART              (IRQ_ARMCTRL_START + INTERRUPT_UART)
++#define IRQ_SLIMBUS           (IRQ_ARMCTRL_START + INTERRUPT_SLIMBUS)
++#define IRQ_VEC               (IRQ_ARMCTRL_START + INTERRUPT_VEC)
++#define IRQ_CPG               (IRQ_ARMCTRL_START + INTERRUPT_CPG)
++#define IRQ_RNG               (IRQ_ARMCTRL_START + INTERRUPT_RNG)
++#define IRQ_ARASANSDIO        (IRQ_ARMCTRL_START + INTERRUPT_ARASANSDIO)
++#define IRQ_AVSPMON           (IRQ_ARMCTRL_START + INTERRUPT_AVSPMON)
++
++#define IRQ_ARM_TIMER         (IRQ_ARMCTRL_START + INTERRUPT_ARM_TIMER)
++#define IRQ_ARM_MAILBOX       (IRQ_ARMCTRL_START + INTERRUPT_ARM_MAILBOX)
++#define IRQ_ARM_DOORBELL_0    (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_0)
++#define IRQ_ARM_DOORBELL_1    (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_1)
++#define IRQ_VPU0_HALTED       (IRQ_ARMCTRL_START + INTERRUPT_VPU0_HALTED)
++#define IRQ_VPU1_HALTED       (IRQ_ARMCTRL_START + INTERRUPT_VPU1_HALTED)
++#define IRQ_ILLEGAL_TYPE0     (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE0)
++#define IRQ_ILLEGAL_TYPE1     (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE1)
++#define IRQ_PENDING1          (IRQ_ARMCTRL_START + INTERRUPT_PENDING1)
++#define IRQ_PENDING2          (IRQ_ARMCTRL_START + INTERRUPT_PENDING2)
++
++#define FIQ_START             HARD_IRQS
++
++/*
++ *  FIQ interrupts definitions are the same as the INT definitions.
++ */
++#define FIQ_TIMER0            (FIQ_START+INTERRUPT_TIMER0)
++#define FIQ_TIMER1            (FIQ_START+INTERRUPT_TIMER1)
++#define FIQ_TIMER2            (FIQ_START+INTERRUPT_TIMER2)
++#define FIQ_TIMER3            (FIQ_START+INTERRUPT_TIMER3)
++#define FIQ_CODEC0            (FIQ_START+INTERRUPT_CODEC0)
++#define FIQ_CODEC1            (FIQ_START+INTERRUPT_CODEC1)
++#define FIQ_CODEC2            (FIQ_START+INTERRUPT_CODEC2)
++#define FIQ_JPEG              (FIQ_START+INTERRUPT_JPEG)
++#define FIQ_ISP               (FIQ_START+INTERRUPT_ISP)
++#define FIQ_USB               (FIQ_START+INTERRUPT_USB)
++#define FIQ_3D                (FIQ_START+INTERRUPT_3D)
++#define FIQ_TRANSPOSER        (FIQ_START+INTERRUPT_TRANSPOSER)
++#define FIQ_MULTICORESYNC0    (FIQ_START+INTERRUPT_MULTICORESYNC0)
++#define FIQ_MULTICORESYNC1    (FIQ_START+INTERRUPT_MULTICORESYNC1)
++#define FIQ_MULTICORESYNC2    (FIQ_START+INTERRUPT_MULTICORESYNC2)
++#define FIQ_MULTICORESYNC3    (FIQ_START+INTERRUPT_MULTICORESYNC3)
++#define FIQ_DMA0              (FIQ_START+INTERRUPT_DMA0)
++#define FIQ_DMA1              (FIQ_START+INTERRUPT_DMA1)
++#define FIQ_DMA2              (FIQ_START+INTERRUPT_DMA2)
++#define FIQ_DMA3              (FIQ_START+INTERRUPT_DMA3)
++#define FIQ_DMA4              (FIQ_START+INTERRUPT_DMA4)
++#define FIQ_DMA5              (FIQ_START+INTERRUPT_DMA5)
++#define FIQ_DMA6              (FIQ_START+INTERRUPT_DMA6)
++#define FIQ_DMA7              (FIQ_START+INTERRUPT_DMA7)
++#define FIQ_DMA8              (FIQ_START+INTERRUPT_DMA8)
++#define FIQ_DMA9              (FIQ_START+INTERRUPT_DMA9)
++#define FIQ_DMA10             (FIQ_START+INTERRUPT_DMA10)
++#define FIQ_DMA11             (FIQ_START+INTERRUPT_DMA11)
++#define FIQ_DMA12             (FIQ_START+INTERRUPT_DMA12)
++#define FIQ_AUX               (FIQ_START+INTERRUPT_AUX)
++#define FIQ_ARM               (FIQ_START+INTERRUPT_ARM)
++#define FIQ_VPUDMA            (FIQ_START+INTERRUPT_VPUDMA)
++#define FIQ_HOSTPORT          (FIQ_START+INTERRUPT_HOSTPORT)
++#define FIQ_VIDEOSCALER       (FIQ_START+INTERRUPT_VIDEOSCALER)
++#define FIQ_CCP2TX            (FIQ_START+INTERRUPT_CCP2TX)
++#define FIQ_SDC               (FIQ_START+INTERRUPT_SDC)
++#define FIQ_DSI0              (FIQ_START+INTERRUPT_DSI0)
++#define FIQ_AVE               (FIQ_START+INTERRUPT_AVE)
++#define FIQ_CAM0              (FIQ_START+INTERRUPT_CAM0)
++#define FIQ_CAM1              (FIQ_START+INTERRUPT_CAM1)
++#define FIQ_HDMI0             (FIQ_START+INTERRUPT_HDMI0)
++#define FIQ_HDMI1             (FIQ_START+INTERRUPT_HDMI1)
++#define FIQ_PIXELVALVE1       (FIQ_START+INTERRUPT_PIXELVALVE1)
++#define FIQ_I2CSPISLV         (FIQ_START+INTERRUPT_I2CSPISLV)
++#define FIQ_DSI1              (FIQ_START+INTERRUPT_DSI1)
++#define FIQ_PWA0              (FIQ_START+INTERRUPT_PWA0)
++#define FIQ_PWA1              (FIQ_START+INTERRUPT_PWA1)
++#define FIQ_CPR               (FIQ_START+INTERRUPT_CPR)
++#define FIQ_SMI               (FIQ_START+INTERRUPT_SMI)
++#define FIQ_GPIO0             (FIQ_START+INTERRUPT_GPIO0)
++#define FIQ_GPIO1             (FIQ_START+INTERRUPT_GPIO1)
++#define FIQ_GPIO2             (FIQ_START+INTERRUPT_GPIO2)
++#define FIQ_GPIO3             (FIQ_START+INTERRUPT_GPIO3)
++#define FIQ_I2C               (FIQ_START+INTERRUPT_I2C)
++#define FIQ_SPI               (FIQ_START+INTERRUPT_SPI)
++#define FIQ_I2SPCM            (FIQ_START+INTERRUPT_I2SPCM)
++#define FIQ_SDIO              (FIQ_START+INTERRUPT_SDIO)
++#define FIQ_UART              (FIQ_START+INTERRUPT_UART)
++#define FIQ_SLIMBUS           (FIQ_START+INTERRUPT_SLIMBUS)
++#define FIQ_VEC               (FIQ_START+INTERRUPT_VEC)
++#define FIQ_CPG               (FIQ_START+INTERRUPT_CPG)
++#define FIQ_RNG               (FIQ_START+INTERRUPT_RNG)
++#define FIQ_ARASANSDIO        (FIQ_START+INTERRUPT_ARASANSDIO)
++#define FIQ_AVSPMON           (FIQ_START+INTERRUPT_AVSPMON)
++
++#define FIQ_ARM_TIMER         (FIQ_START+INTERRUPT_ARM_TIMER)
++#define FIQ_ARM_MAILBOX       (FIQ_START+INTERRUPT_ARM_MAILBOX)
++#define FIQ_ARM_DOORBELL_0    (FIQ_START+INTERRUPT_ARM_DOORBELL_0)
++#define FIQ_ARM_DOORBELL_1    (FIQ_START+INTERRUPT_ARM_DOORBELL_1)
++#define FIQ_VPU0_HALTED       (FIQ_START+INTERRUPT_VPU0_HALTED)
++#define FIQ_VPU1_HALTED       (FIQ_START+INTERRUPT_VPU1_HALTED)
++#define FIQ_ILLEGAL_TYPE0     (FIQ_START+INTERRUPT_ILLEGAL_TYPE0)
++#define FIQ_ILLEGAL_TYPE1     (FIQ_START+INTERRUPT_ILLEGAL_TYPE1)
++#define FIQ_PENDING1          (FIQ_START+INTERRUPT_PENDING1)
++#define FIQ_PENDING2          (FIQ_START+INTERRUPT_PENDING2)
++
++#define GPIO_IRQ_START	      (HARD_IRQS + FIQ_IRQS)
++
++#define HARD_IRQS	      (64 + 21)
++#define FIQ_IRQS              (64 + 21)
++#define GPIO_IRQS	      (32*5)
++
++#define NR_IRQS		      HARD_IRQS+FIQ_IRQS+GPIO_IRQS
++
++
++#endif /* _BCM2708_IRQS_H_ */
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/memory.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/memory.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/memory.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/memory.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,57 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/memory.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ASM_ARCH_MEMORY_H
++#define __ASM_ARCH_MEMORY_H
++
++/* Memory overview:
++
++   [ARMcore] <--virtual addr-->
++   [ARMmmu] <--physical addr-->
++   [GERTmap] <--bus add-->
++   [VCperiph]
++
++*/
++
++/*
++ * Physical DRAM offset.
++ */
++#define PLAT_PHYS_OFFSET	UL(0x00000000)
++#define VC_ARMMEM_OFFSET	UL(0x00000000)   /* offset in VC of ARM memory */
++
++#ifdef CONFIG_BCM2708_NOL2CACHE
++ #define _REAL_BUS_OFFSET UL(0xC0000000)   /* don't use L1 or L2 caches */
++#else
++ #define _REAL_BUS_OFFSET UL(0x40000000)   /* use L2 cache */
++#endif
++
++/* We're using the memory at 64M in the VideoCore for Linux - this adjustment
++ * will provide the offset into this area as well as setting the bits that
++ * stop the L1 and L2 cache from being used
++ *
++ * WARNING: this only works because the ARM is given memory at a fixed location
++ *          (ARMMEM_OFFSET)
++ */
++#define BUS_OFFSET          (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET)
++#define __virt_to_bus(x)    ((x) + (BUS_OFFSET - PAGE_OFFSET))
++#define __bus_to_virt(x)    ((x) - (BUS_OFFSET - PAGE_OFFSET))
++#define __pfn_to_bus(x)     (__pfn_to_phys(x) + (BUS_OFFSET - PLAT_PHYS_OFFSET))
++#define __bus_to_pfn(x)     __phys_to_pfn((x) - (BUS_OFFSET - PLAT_PHYS_OFFSET))
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/platform.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/platform.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/platform.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/platform.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,226 @@
++/*
++ * arch/arm/mach-bcm2708/include/mach/platform.h
++ *
++ * Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef _BCM2708_PLATFORM_H
++#define _BCM2708_PLATFORM_H
++
++
++/* macros to get at IO space when running virtually */
++#define IO_ADDRESS(x)	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
++
++#define __io_address(n)     IOMEM(IO_ADDRESS(n))
++
++
++/*
++ *  SDRAM
++ */
++#define BCM2708_SDRAM_BASE           0x00000000
++
++/*
++ *  Logic expansion modules
++ *
++ */
++
++
++/* ------------------------------------------------------------------------
++ *  BCM2708 ARMCTRL Registers
++ * ------------------------------------------------------------------------
++ */
++
++#define HW_REGISTER_RW(addr) (addr)
++#define HW_REGISTER_RO(addr) (addr)
++
++#include "arm_control.h"
++#undef ARM_BASE
++
++/*
++ * Definitions and addresses for the ARM CONTROL logic
++ * This file is manually generated.
++ */
++
++#define BCM2708_PERI_BASE        0x20000000
++#define IC0_BASE                 (BCM2708_PERI_BASE + 0x2000)
++#define ST_BASE                  (BCM2708_PERI_BASE + 0x3000)   /* System Timer */
++#define MPHI_BASE		 (BCM2708_PERI_BASE + 0x6000)	/* Message -based Parallel Host Interface */
++#define DMA_BASE		 (BCM2708_PERI_BASE + 0x7000)	/* DMA controller */
++#define ARM_BASE                 (BCM2708_PERI_BASE + 0xB000)	 /* BCM2708 ARM control block */
++#define PM_BASE			 (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
++#define RNG_BASE                 (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */
++#define GPIO_BASE                (BCM2708_PERI_BASE + 0x200000) /* GPIO */
++#define UART0_BASE               (BCM2708_PERI_BASE + 0x201000)	/* Uart 0 */
++#define MMCI0_BASE               (BCM2708_PERI_BASE + 0x202000) /* MMC interface */
++#define SPI0_BASE		 (BCM2708_PERI_BASE + 0x204000) /* SPI0 */
++#define BSC0_BASE		 (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
++#define UART1_BASE               (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */
++#define EMMC_BASE                (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */
++#define SMI_BASE		 (BCM2708_PERI_BASE + 0x600000) /* SMI */
++#define BSC1_BASE		 (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
++#define USB_BASE                 (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
++#define MCORE_BASE               (BCM2708_PERI_BASE + 0x0000)   /* Fake frame buffer device (actually the multicore sync block*/
++
++#define ARMCTRL_BASE             (ARM_BASE + 0x000)
++#define ARMCTRL_IC_BASE          (ARM_BASE + 0x200)           /* ARM interrupt controller */
++#define ARMCTRL_TIMER0_1_BASE    (ARM_BASE + 0x400)           /* Timer 0 and 1 */
++#define ARMCTRL_0_SBM_BASE       (ARM_BASE + 0x800)           /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */
++
++
++/*
++ * Interrupt assignments
++ */
++
++#define ARM_IRQ1_BASE                  0
++#define INTERRUPT_TIMER0               (ARM_IRQ1_BASE + 0)
++#define INTERRUPT_TIMER1               (ARM_IRQ1_BASE + 1)
++#define INTERRUPT_TIMER2               (ARM_IRQ1_BASE + 2)
++#define INTERRUPT_TIMER3               (ARM_IRQ1_BASE + 3)
++#define INTERRUPT_CODEC0               (ARM_IRQ1_BASE + 4)
++#define INTERRUPT_CODEC1               (ARM_IRQ1_BASE + 5)
++#define INTERRUPT_CODEC2               (ARM_IRQ1_BASE + 6)
++#define INTERRUPT_VC_JPEG              (ARM_IRQ1_BASE + 7)
++#define INTERRUPT_ISP                  (ARM_IRQ1_BASE + 8)
++#define INTERRUPT_VC_USB               (ARM_IRQ1_BASE + 9)
++#define INTERRUPT_VC_3D                (ARM_IRQ1_BASE + 10)
++#define INTERRUPT_TRANSPOSER           (ARM_IRQ1_BASE + 11)
++#define INTERRUPT_MULTICORESYNC0       (ARM_IRQ1_BASE + 12)
++#define INTERRUPT_MULTICORESYNC1       (ARM_IRQ1_BASE + 13)
++#define INTERRUPT_MULTICORESYNC2       (ARM_IRQ1_BASE + 14)
++#define INTERRUPT_MULTICORESYNC3       (ARM_IRQ1_BASE + 15)
++#define INTERRUPT_DMA0                 (ARM_IRQ1_BASE + 16)
++#define INTERRUPT_DMA1                 (ARM_IRQ1_BASE + 17)
++#define INTERRUPT_VC_DMA2              (ARM_IRQ1_BASE + 18)
++#define INTERRUPT_VC_DMA3              (ARM_IRQ1_BASE + 19)
++#define INTERRUPT_DMA4                 (ARM_IRQ1_BASE + 20)
++#define INTERRUPT_DMA5                 (ARM_IRQ1_BASE + 21)
++#define INTERRUPT_DMA6                 (ARM_IRQ1_BASE + 22)
++#define INTERRUPT_DMA7                 (ARM_IRQ1_BASE + 23)
++#define INTERRUPT_DMA8                 (ARM_IRQ1_BASE + 24)
++#define INTERRUPT_DMA9                 (ARM_IRQ1_BASE + 25)
++#define INTERRUPT_DMA10                (ARM_IRQ1_BASE + 26)
++#define INTERRUPT_DMA11                (ARM_IRQ1_BASE + 27)
++#define INTERRUPT_DMA12                (ARM_IRQ1_BASE + 28)
++#define INTERRUPT_AUX                (ARM_IRQ1_BASE + 29)
++#define INTERRUPT_ARM                  (ARM_IRQ1_BASE + 30)
++#define INTERRUPT_VPUDMA               (ARM_IRQ1_BASE + 31)
++
++#define ARM_IRQ2_BASE                  32
++#define INTERRUPT_HOSTPORT             (ARM_IRQ2_BASE + 0)
++#define INTERRUPT_VIDEOSCALER          (ARM_IRQ2_BASE + 1)
++#define INTERRUPT_CCP2TX               (ARM_IRQ2_BASE + 2)
++#define INTERRUPT_SDC                  (ARM_IRQ2_BASE + 3)
++#define INTERRUPT_DSI0                 (ARM_IRQ2_BASE + 4)
++#define INTERRUPT_AVE                  (ARM_IRQ2_BASE + 5)
++#define INTERRUPT_CAM0                 (ARM_IRQ2_BASE + 6)
++#define INTERRUPT_CAM1                 (ARM_IRQ2_BASE + 7)
++#define INTERRUPT_HDMI0                (ARM_IRQ2_BASE + 8)
++#define INTERRUPT_HDMI1                (ARM_IRQ2_BASE + 9)
++#define INTERRUPT_PIXELVALVE1          (ARM_IRQ2_BASE + 10)
++#define INTERRUPT_I2CSPISLV            (ARM_IRQ2_BASE + 11)
++#define INTERRUPT_DSI1                 (ARM_IRQ2_BASE + 12)
++#define INTERRUPT_PWA0                 (ARM_IRQ2_BASE + 13)
++#define INTERRUPT_PWA1                 (ARM_IRQ2_BASE + 14)
++#define INTERRUPT_CPR                  (ARM_IRQ2_BASE + 15)
++#define INTERRUPT_SMI                  (ARM_IRQ2_BASE + 16)
++#define INTERRUPT_GPIO0                (ARM_IRQ2_BASE + 17)
++#define INTERRUPT_GPIO1                (ARM_IRQ2_BASE + 18)
++#define INTERRUPT_GPIO2                (ARM_IRQ2_BASE + 19)
++#define INTERRUPT_GPIO3                (ARM_IRQ2_BASE + 20)
++#define INTERRUPT_VC_I2C               (ARM_IRQ2_BASE + 21)
++#define INTERRUPT_VC_SPI               (ARM_IRQ2_BASE + 22)
++#define INTERRUPT_VC_I2SPCM            (ARM_IRQ2_BASE + 23)
++#define INTERRUPT_VC_SDIO              (ARM_IRQ2_BASE + 24)
++#define INTERRUPT_VC_UART              (ARM_IRQ2_BASE + 25)
++#define INTERRUPT_SLIMBUS              (ARM_IRQ2_BASE + 26)
++#define INTERRUPT_VEC                  (ARM_IRQ2_BASE + 27)
++#define INTERRUPT_CPG                  (ARM_IRQ2_BASE + 28)
++#define INTERRUPT_RNG                  (ARM_IRQ2_BASE + 29)
++#define INTERRUPT_VC_ARASANSDIO        (ARM_IRQ2_BASE + 30)
++#define INTERRUPT_AVSPMON              (ARM_IRQ2_BASE + 31)
++
++#define ARM_IRQ0_BASE                  64
++#define INTERRUPT_ARM_TIMER            (ARM_IRQ0_BASE + 0)
++#define INTERRUPT_ARM_MAILBOX          (ARM_IRQ0_BASE + 1)
++#define INTERRUPT_ARM_DOORBELL_0       (ARM_IRQ0_BASE + 2)
++#define INTERRUPT_ARM_DOORBELL_1       (ARM_IRQ0_BASE + 3)
++#define INTERRUPT_VPU0_HALTED          (ARM_IRQ0_BASE + 4)
++#define INTERRUPT_VPU1_HALTED          (ARM_IRQ0_BASE + 5)
++#define INTERRUPT_ILLEGAL_TYPE0        (ARM_IRQ0_BASE + 6)
++#define INTERRUPT_ILLEGAL_TYPE1        (ARM_IRQ0_BASE + 7)
++#define INTERRUPT_PENDING1             (ARM_IRQ0_BASE + 8)
++#define INTERRUPT_PENDING2             (ARM_IRQ0_BASE + 9)
++#define INTERRUPT_JPEG                 (ARM_IRQ0_BASE + 10)
++#define INTERRUPT_USB                  (ARM_IRQ0_BASE + 11)
++#define INTERRUPT_3D                   (ARM_IRQ0_BASE + 12)
++#define INTERRUPT_DMA2                 (ARM_IRQ0_BASE + 13)
++#define INTERRUPT_DMA3                 (ARM_IRQ0_BASE + 14)
++#define INTERRUPT_I2C                  (ARM_IRQ0_BASE + 15)
++#define INTERRUPT_SPI                  (ARM_IRQ0_BASE + 16)
++#define INTERRUPT_I2SPCM               (ARM_IRQ0_BASE + 17)
++#define INTERRUPT_SDIO                 (ARM_IRQ0_BASE + 18)
++#define INTERRUPT_UART                 (ARM_IRQ0_BASE + 19)
++#define INTERRUPT_ARASANSDIO           (ARM_IRQ0_BASE + 20)
++
++#define MAXIRQNUM                      (32 + 32 + 20)
++#define MAXFIQNUM                      (32 + 32 + 20)
++
++#define MAX_TIMER                       2
++#define MAX_PERIOD                      699050
++#define TICKS_PER_uSEC                  1
++
++/*
++ *  These are useconds NOT ticks.
++ *
++ */
++#define mSEC_1                          1000
++#define mSEC_5                          (mSEC_1 * 5)
++#define mSEC_10                         (mSEC_1 * 10)
++#define mSEC_25                         (mSEC_1 * 25)
++#define SEC_1                           (mSEC_1 * 1000)
++
++/*
++ * Watchdog
++ */
++#define PM_RSTC			       (PM_BASE+0x1c)
++#define PM_RSTS			       (PM_BASE+0x20)
++#define PM_WDOG			       (PM_BASE+0x24)
++
++#define PM_WDOG_RESET                                         0000000000
++#define PM_PASSWORD		       0x5a000000
++#define PM_WDOG_TIME_SET	       0x000fffff
++#define PM_RSTC_WRCFG_CLR              0xffffffcf
++#define PM_RSTC_WRCFG_SET              0x00000030
++#define PM_RSTC_WRCFG_FULL_RESET       0x00000020
++#define PM_RSTC_RESET                  0x00000102
++
++#define PM_RSTS_HADPOR_SET                                 0x00001000
++#define PM_RSTS_HADSRH_SET                                 0x00000400
++#define PM_RSTS_HADSRF_SET                                 0x00000200
++#define PM_RSTS_HADSRQ_SET                                 0x00000100
++#define PM_RSTS_HADWRH_SET                                 0x00000040
++#define PM_RSTS_HADWRF_SET                                 0x00000020
++#define PM_RSTS_HADWRQ_SET                                 0x00000010
++#define PM_RSTS_HADDRH_SET                                 0x00000004
++#define PM_RSTS_HADDRF_SET                                 0x00000002
++#define PM_RSTS_HADDRQ_SET                                 0x00000001
++
++#define UART0_CLOCK      3000000
++
++#endif
++
++/* END */
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/power.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/power.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/power.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/power.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,26 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/power.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This device provides a shared mechanism for controlling the power to
++ * VideoCore subsystems.
++ */
++
++#ifndef _MACH_BCM2708_POWER_H
++#define _MACH_BCM2708_POWER_H
++
++#include <linux/types.h>
++#include <mach/arm_power.h>
++
++typedef unsigned int BCM_POWER_HANDLE_T;
++
++extern int bcm_power_open(BCM_POWER_HANDLE_T *handle);
++extern int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request);
++extern int bcm_power_close(BCM_POWER_HANDLE_T handle);
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/system.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/system.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/system.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/system.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,38 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/system.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *  Copyright (C) 2003 ARM Limited
++ *  Copyright (C) 2000 Deep Blue Solutions Ltd
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ASM_ARCH_SYSTEM_H
++#define __ASM_ARCH_SYSTEM_H
++
++#include <linux/io.h>
++#include <mach/hardware.h>
++#include <mach/platform.h>
++
++static inline void arch_idle(void)
++{
++	/*
++	 * This should do all the clock switching
++	 * and wait for interrupt tricks
++	 */
++	cpu_do_idle();
++}
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/timex.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/timex.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/timex.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/timex.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,23 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/timex.h
++ *
++ *  BCM2708 sysem clock frequency
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#define CLOCK_TICK_RATE		(1000000)
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/uncompress.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/uncompress.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/uncompress.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/uncompress.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,85 @@
++/*
++ *  arch/arm/mach-bcn2708/include/mach/uncompress.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *  Copyright (C) 2003 ARM Limited
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/io.h>
++#include <linux/amba/serial.h>
++#include <mach/hardware.h>
++
++#define UART_BAUD 115200
++
++#define BCM2708_UART_DR   __io(UART0_BASE + UART01x_DR)
++#define BCM2708_UART_FR   __io(UART0_BASE + UART01x_FR)
++#define BCM2708_UART_IBRD __io(UART0_BASE + UART011_IBRD)
++#define BCM2708_UART_FBRD __io(UART0_BASE + UART011_FBRD)
++#define BCM2708_UART_LCRH __io(UART0_BASE + UART011_LCRH)
++#define BCM2708_UART_CR   __io(UART0_BASE + UART011_CR)
++
++/*
++ * This does not append a newline
++ */
++static inline void putc(int c)
++{
++	while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF)
++		barrier();
++
++	__raw_writel(c, BCM2708_UART_DR);
++}
++
++static inline void flush(void)
++{
++	int fr;
++
++	do {
++		fr = __raw_readl(BCM2708_UART_FR);
++		barrier();
++	} while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
++}
++
++static inline void arch_decomp_setup(void)
++{
++	int temp, div, rem, frac;
++
++	temp = 16 * UART_BAUD;
++	div = UART0_CLOCK / temp;
++	rem = UART0_CLOCK % temp;
++	temp = (8 * rem) / UART_BAUD;
++	frac = (temp >> 1) + (temp & 1);
++
++	/* Make sure the UART is disabled before we start */
++	__raw_writel(0, BCM2708_UART_CR);
++
++	/* Set the baud rate */
++	__raw_writel(div, BCM2708_UART_IBRD);
++	__raw_writel(frac, BCM2708_UART_FBRD);
++
++	/* Set the UART to 8n1, FIFO enabled */
++	__raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH);
++
++	/* Enable the UART */
++	__raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE,
++			BCM2708_UART_CR);
++}
++
++/*
++ * nothing to do
++ */
++#define arch_decomp_wdog()
++
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/vcio.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vcio.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/vcio.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vcio.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,141 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/vcio.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef _MACH_BCM2708_VCIO_H
++#define _MACH_BCM2708_VCIO_H
++
++/* Routines to handle I/O via the VideoCore "ARM control" registers
++ * (semaphores, doorbells, mailboxes)
++ */
++
++#define BCM_VCIO_DRIVER_NAME "bcm2708_vcio"
++
++/* Constants shared with the ARM identifying separate mailbox channels */
++#define MBOX_CHAN_POWER    0 /* for use by the power management interface */
++#define MBOX_CHAN_FB       1 /* for use by the frame buffer */
++#define MBOX_CHAN_VCHIQ    3 /* for use by the VCHIQ interface */
++#define MBOX_CHAN_PROPERTY 8 /* for use by the property channel */
++#define MBOX_CHAN_COUNT    9
++
++/* Mailbox property tags */
++enum {
++	VCMSG_PROPERTY_END               = 0x00000000,
++	VCMSG_GET_FIRMWARE_REVISION      = 0x00000001,
++	VCMSG_GET_BOARD_MODEL            = 0x00010001,
++	VCMSG_GET_BOARD_REVISION	 = 0x00020002,
++	VCMSG_GET_BOARD_MAC_ADDRESS	 = 0x00020003,
++	VCMSG_GET_BOARD_SERIAL		 = 0x00020004,
++	VCMSG_GET_ARM_MEMORY		 = 0x00020005,
++	VCMSG_GET_VC_MEMORY		 = 0x00020006,
++	VCMSG_GET_CLOCKS		 = 0x00020007,
++	VCMSG_GET_COMMAND_LINE           = 0x00050001,
++	VCMSG_GET_DMA_CHANNELS           = 0x00060001,
++	VCMSG_GET_POWER_STATE            = 0x00020001,
++	VCMSG_GET_TIMING		 = 0x00020002,
++	VCMSG_SET_POWER_STATE            = 0x00028001,
++	VCMSG_GET_CLOCK_STATE            = 0x00030001,
++	VCMSG_SET_CLOCK_STATE            = 0x00038001,
++	VCMSG_GET_CLOCK_RATE             = 0x00030002,
++	VCMSG_SET_CLOCK_RATE             = 0x00038002,
++	VCMSG_GET_VOLTAGE                = 0x00030003,
++	VCMSG_SET_VOLTAGE                = 0x00038003,
++	VCMSG_GET_MAX_CLOCK              = 0x00030004,
++	VCMSG_GET_MAX_VOLTAGE            = 0x00030005,
++	VCMSG_GET_TEMPERATURE            = 0x00030006,
++	VCMSG_GET_MIN_CLOCK              = 0x00030007,
++	VCMSG_GET_MIN_VOLTAGE            = 0x00030008,
++	VCMSG_GET_TURBO                  = 0x00030009,
++	VCMSG_SET_TURBO                  = 0x00038009,
++	VCMSG_SET_ALLOCATE_BUFFER        = 0x00040001,
++	VCMSG_SET_RELEASE_BUFFER         = 0x00048001,
++	VCMSG_SET_BLANK_SCREEN           = 0x00040002,
++	VCMSG_TST_BLANK_SCREEN           = 0x00044002,
++	VCMSG_GET_PHYSICAL_WIDTH_HEIGHT  = 0x00040003,
++	VCMSG_TST_PHYSICAL_WIDTH_HEIGHT  = 0x00044003,
++	VCMSG_SET_PHYSICAL_WIDTH_HEIGHT  = 0x00048003,
++	VCMSG_GET_VIRTUAL_WIDTH_HEIGHT   = 0x00040004,
++	VCMSG_TST_VIRTUAL_WIDTH_HEIGHT   = 0x00044004,
++	VCMSG_SET_VIRTUAL_WIDTH_HEIGHT   = 0x00048004,
++	VCMSG_GET_DEPTH                  = 0x00040005,
++	VCMSG_TST_DEPTH                  = 0x00044005,
++	VCMSG_SET_DEPTH                  = 0x00048005,
++	VCMSG_GET_PIXEL_ORDER            = 0x00040006,
++	VCMSG_TST_PIXEL_ORDER            = 0x00044006,
++	VCMSG_SET_PIXEL_ORDER            = 0x00048006,
++	VCMSG_GET_ALPHA_MODE             = 0x00040007,
++	VCMSG_TST_ALPHA_MODE             = 0x00044007,
++	VCMSG_SET_ALPHA_MODE             = 0x00048007,
++	VCMSG_GET_PITCH                  = 0x00040008,
++	VCMSG_TST_PITCH                  = 0x00044008,
++	VCMSG_SET_PITCH                  = 0x00048008,
++	VCMSG_GET_VIRTUAL_OFFSET         = 0x00040009,
++	VCMSG_TST_VIRTUAL_OFFSET         = 0x00044009,
++	VCMSG_SET_VIRTUAL_OFFSET         = 0x00048009,
++	VCMSG_GET_OVERSCAN               = 0x0004000a,
++	VCMSG_TST_OVERSCAN               = 0x0004400a,
++	VCMSG_SET_OVERSCAN               = 0x0004800a,
++	VCMSG_GET_PALETTE                = 0x0004000b,
++	VCMSG_TST_PALETTE                = 0x0004400b,
++	VCMSG_SET_PALETTE                = 0x0004800b,
++	VCMSG_GET_LAYER                  = 0x0004000c,
++	VCMSG_TST_LAYER                  = 0x0004400c,
++	VCMSG_SET_LAYER                  = 0x0004800c,
++	VCMSG_GET_TRANSFORM              = 0x0004000d,
++	VCMSG_TST_TRANSFORM              = 0x0004400d,
++	VCMSG_SET_TRANSFORM              = 0x0004800d,
++};
++
++extern int /*rc*/ bcm_mailbox_read(unsigned chan, uint32_t *data28);
++extern int /*rc*/ bcm_mailbox_write(unsigned chan, uint32_t data28);
++extern int /*rc*/ bcm_mailbox_property(void *data, int size);
++
++#include <linux/ioctl.h>
++
++/* 
++ * The major device number. We can't rely on dynamic 
++ * registration any more, because ioctls need to know 
++ * it. 
++ */
++#define MAJOR_NUM 100
++
++/* 
++ * Set the message of the device driver 
++ */
++#define IOCTL_MBOX_PROPERTY _IOWR(MAJOR_NUM, 0, char *)
++/*
++ * _IOWR means that we're creating an ioctl command 
++ * number for passing information from a user process
++ * to the kernel module and from the kernel module to user process 
++ *
++ * The first arguments, MAJOR_NUM, is the major device 
++ * number we're using.
++ *
++ * The second argument is the number of the command 
++ * (there could be several with different meanings).
++ *
++ * The third argument is the type we want to get from 
++ * the process to the kernel.
++ */
++
++/* 
++ * The name of the device file 
++ */
++#define DEVICE_FILE_NAME "char_dev"
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/vc_mem.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vc_mem.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/vc_mem.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vc_mem.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,36 @@
++/*****************************************************************************
++* Copyright 2010 - 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#if !defined( VC_MEM_H )
++#define VC_MEM_H
++
++#include <linux/ioctl.h>
++
++#define VC_MEM_IOC_MAGIC  'v'
++
++#define VC_MEM_IOC_MEM_PHYS_ADDR    _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long )
++#define VC_MEM_IOC_MEM_SIZE         _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int )
++#define VC_MEM_IOC_MEM_BASE         _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int )
++#define VC_MEM_IOC_MEM_LOAD         _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int )
++
++#if defined( __KERNEL__ )
++#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF
++
++extern unsigned long mm_vc_mem_phys_addr;
++extern unsigned int  mm_vc_mem_size;
++extern int vc_mem_get_current_size( void );
++#endif
++
++#endif  /* VC_MEM_H */
++
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/vc_support.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vc_support.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/vc_support.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vc_support.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,69 @@
++#ifndef _VC_SUPPORT_H_
++#define _VC_SUPPORT_H_
++
++/*
++ * vc_support.h
++ *
++ *  Created on: 25 Nov 2012
++ *      Author: Simon
++ */
++
++enum {
++/*
++      If a MEM_HANDLE_T is discardable, the memory manager may resize it to size
++      0 at any time when it is not locked or retained.
++   */
++   MEM_FLAG_DISCARDABLE = 1 << 0,
++
++   /*
++      If a MEM_HANDLE_T is allocating (or normal), its block of memory will be
++      accessed in an allocating fashion through the cache.
++   */
++   MEM_FLAG_NORMAL = 0 << 2,
++   MEM_FLAG_ALLOCATING = MEM_FLAG_NORMAL,
++
++   /*
++      If a MEM_HANDLE_T is direct, its block of memory will be accessed
++      directly, bypassing the cache.
++   */
++   MEM_FLAG_DIRECT = 1 << 2,
++
++   /*
++      If a MEM_HANDLE_T is coherent, its block of memory will be accessed in a
++      non-allocating fashion through the cache.
++   */
++   MEM_FLAG_COHERENT = 2 << 2,
++
++   /*
++      If a MEM_HANDLE_T is L1-nonallocating, its block of memory will be accessed by
++      the VPU in a fashion which is allocating in L2, but only coherent in L1.
++   */
++   MEM_FLAG_L1_NONALLOCATING = (MEM_FLAG_DIRECT | MEM_FLAG_COHERENT),
++
++   /*
++      If a MEM_HANDLE_T is zero'd, its contents are set to 0 rather than
++      MEM_HANDLE_INVALID on allocation and resize up.
++   */
++   MEM_FLAG_ZERO = 1 << 4,
++
++   /*
++      If a MEM_HANDLE_T is uninitialised, it will not be reset to a defined value
++      (either zero, or all 1's) on allocation.
++    */
++   MEM_FLAG_NO_INIT = 1 << 5,
++
++   /*
++      Hints.
++   */
++   MEM_FLAG_HINT_PERMALOCK = 1 << 6, /* Likely to be locked for long periods of time. */
++};
++
++unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags);
++unsigned int ReleaseVcMemory(unsigned int handle);
++unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle);
++unsigned int UnlockVcMemory(unsigned int handle);
++
++unsigned int ExecuteVcCode(unsigned int code,
++		unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5);
++
++#endif
+diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/vmalloc.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vmalloc.h
+--- linux-3.10/arch/arm/mach-bcm2708/include/mach/vmalloc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vmalloc.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,20 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/vmalloc.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#define VMALLOC_END		(0xe8000000)
+diff -urN linux-3.10/arch/arm/mach-bcm2708/Kconfig linux-rpi-3.10.y/arch/arm/mach-bcm2708/Kconfig
+--- linux-3.10/arch/arm/mach-bcm2708/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,48 @@
++menu "Broadcom BCM2708 Implementations"
++	depends on ARCH_BCM2708
++
++config MACH_BCM2708
++	bool "Broadcom BCM2708 Development Platform"
++	select NEED_MACH_MEMORY_H
++	select NEED_MACH_IO_H
++	select CPU_V6
++	help
++	  Include support for the Broadcom(R) BCM2708 platform.
++
++config BCM2708_GPIO
++	bool "BCM2708 gpio support"
++	depends on MACH_BCM2708
++	select ARCH_REQUIRE_GPIOLIB
++        default y
++	help
++	  Include support for the Broadcom(R) BCM2708 gpio.
++
++config BCM2708_VCMEM
++	bool "Videocore Memory"
++	depends on MACH_BCM2708
++        default y
++        help
++          Helper for videocore memory access and total size allocation.	   
++
++config BCM2708_NOL2CACHE
++	bool "Videocore L2 cache disable"
++	depends on MACH_BCM2708
++        default n
++        help
++          Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt.
++
++config BCM2708_DMAER
++	tristate "BCM2708 DMA helper"
++	depends on MACH_BCM2708
++        default n
++        help
++          Enable DMA helper for accelerating X composition
++
++config BCM2708_SPIDEV
++	bool "Bind spidev to SPI0 master"
++	depends on MACH_BCM2708  
++	depends on SPI
++        default y
++		help 
++			Binds spidev driver to the SPI0 master  
++endmenu
+diff -urN linux-3.10/arch/arm/mach-bcm2708/Makefile linux-rpi-3.10.y/arch/arm/mach-bcm2708/Makefile
+--- linux-3.10/arch/arm/mach-bcm2708/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,11 @@
++#
++# Makefile for the linux kernel.
++#
++
++obj-$(CONFIG_MACH_BCM2708) 	+= clock.o bcm2708.o armctrl.o vcio.o power.o dma.o
++obj-$(CONFIG_BCM2708_GPIO)	+= bcm2708_gpio.o
++obj-$(CONFIG_BCM2708_VCMEM)	+= vc_mem.o
++
++obj-$(CONFIG_BCM2708_DMAER)	+= dmaer_master.o
++dmaer_master-objs		:= dmaer.o vc_support.o
++
+diff -urN linux-3.10/arch/arm/mach-bcm2708/Makefile.boot linux-rpi-3.10.y/arch/arm/mach-bcm2708/Makefile.boot
+--- linux-3.10/arch/arm/mach-bcm2708/Makefile.boot	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/Makefile.boot	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,3 @@
++   zreladdr-y	:= 0x00008000
++params_phys-y	:= 0x00000100
++initrd_phys-y	:= 0x00800000
+diff -urN linux-3.10/arch/arm/mach-bcm2708/power.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/power.c
+--- linux-3.10/arch/arm/mach-bcm2708/power.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/power.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,194 @@
++/*
++ *	 linux/arch/arm/mach-bcm2708/power.c
++ *
++ *	 Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This device provides a shared mechanism for controlling the power to
++ * VideoCore subsystems.
++ */
++
++#include <linux/module.h>
++#include <linux/semaphore.h>
++#include <linux/bug.h>
++#include <mach/power.h>
++#include <mach/vcio.h>
++#include <mach/arm_power.h>
++
++#define DRIVER_NAME "bcm2708_power"
++
++#define BCM_POWER_MAXCLIENTS 4
++#define BCM_POWER_NOCLIENT (1<<31)
++
++/* Some drivers expect there devices to be permanently powered */
++#define BCM_POWER_ALWAYS_ON (BCM_POWER_USB)
++
++#if 1
++#define DPRINTK printk
++#else
++#define DPRINTK if (0) printk
++#endif
++
++struct state_struct {
++	uint32_t global_request;
++	uint32_t client_request[BCM_POWER_MAXCLIENTS];
++	struct semaphore client_mutex;
++	struct semaphore mutex;
++} g_state;
++
++int bcm_power_open(BCM_POWER_HANDLE_T *handle)
++{
++	BCM_POWER_HANDLE_T i;
++	int ret = -EBUSY;
++
++	down(&g_state.client_mutex);
++
++	for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) {
++		if (g_state.client_request[i] == BCM_POWER_NOCLIENT) {
++			g_state.client_request[i] = BCM_POWER_NONE;
++			*handle = i;
++			ret = 0;
++			break;
++		}
++	}
++
++	up(&g_state.client_mutex);
++
++	DPRINTK("bcm_power_open() -> %d\n", *handle);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(bcm_power_open);
++
++int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request)
++{
++	int rc = 0;
++
++	DPRINTK("bcm_power_request(%d, %x)\n", handle, request);
++
++	if ((handle < BCM_POWER_MAXCLIENTS) &&
++	    (g_state.client_request[handle] != BCM_POWER_NOCLIENT)) {
++		if (down_interruptible(&g_state.mutex) != 0) {
++			DPRINTK("bcm_power_request -> interrupted\n");
++			return -EINTR;
++		}
++
++		if (request != g_state.client_request[handle]) {
++			uint32_t others_request = 0;
++			uint32_t global_request;
++			BCM_POWER_HANDLE_T i;
++
++			for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) {
++				if (i != handle)
++					others_request |=
++					    g_state.client_request[i];
++			}
++			others_request &= ~BCM_POWER_NOCLIENT;
++
++			global_request = request | others_request;
++			if (global_request != g_state.global_request) {
++				uint32_t actual;
++
++				/* Send a request to VideoCore */
++				bcm_mailbox_write(MBOX_CHAN_POWER,
++						  global_request << 4);
++
++				/* Wait for a response during power-up */
++				if (global_request & ~g_state.global_request) {
++					rc = bcm_mailbox_read(MBOX_CHAN_POWER,
++							      &actual);
++					DPRINTK
++					    ("bcm_mailbox_read -> %08x, %d\n",
++					     actual, rc);
++					actual >>= 4;
++				} else {
++					rc = 0;
++					actual = global_request;
++				}
++
++				if (rc == 0) {
++					if (actual != global_request) {
++						printk(KERN_ERR
++						     "%s: prev global %x, new global %x, actual %x, request %x, others_request %x\n",
++						     __func__,
++						     g_state.global_request,
++						     global_request, actual, request, others_request);
++						/* A failure */
++						BUG_ON((others_request & actual)
++						       != others_request);
++						request &= actual;
++						rc = -EIO;
++					}
++
++					g_state.global_request = actual;
++					g_state.client_request[handle] =
++					    request;
++				}
++			}
++		}
++		up(&g_state.mutex);
++	} else {
++		rc = -EINVAL;
++	}
++	DPRINTK("bcm_power_request -> %d\n", rc);
++	return rc;
++}
++EXPORT_SYMBOL_GPL(bcm_power_request);
++
++int bcm_power_close(BCM_POWER_HANDLE_T handle)
++{
++	int rc;
++
++	DPRINTK("bcm_power_close(%d)\n", handle);
++
++	rc = bcm_power_request(handle, BCM_POWER_NONE);
++	if (rc == 0)
++		g_state.client_request[handle] = BCM_POWER_NOCLIENT;
++
++	return rc;
++}
++EXPORT_SYMBOL_GPL(bcm_power_close);
++
++static int __init bcm_power_init(void)
++{
++#if defined(BCM_POWER_ALWAYS_ON)
++	BCM_POWER_HANDLE_T always_on_handle;
++#endif
++	int rc = 0;
++	int i;
++
++	printk(KERN_INFO "bcm_power: Broadcom power driver\n");
++	bcm_mailbox_write(MBOX_CHAN_POWER, 0);
++
++	for (i = 0; i < BCM_POWER_MAXCLIENTS; i++)
++		g_state.client_request[i] = BCM_POWER_NOCLIENT;
++
++	sema_init(&g_state.client_mutex, 1);
++	sema_init(&g_state.mutex, 1);
++
++	g_state.global_request = 0;
++
++#if defined(BCM_POWER_ALWAYS_ON)
++	if (BCM_POWER_ALWAYS_ON) {
++		bcm_power_open(&always_on_handle);
++		bcm_power_request(always_on_handle, BCM_POWER_ALWAYS_ON);
++	}
++#endif
++
++	return rc;
++}
++
++static void __exit bcm_power_exit(void)
++{
++	bcm_mailbox_write(MBOX_CHAN_POWER, 0);
++}
++
++arch_initcall(bcm_power_init);	/* Initialize early */
++module_exit(bcm_power_exit);
++
++MODULE_AUTHOR("Phil Elwell");
++MODULE_DESCRIPTION("Interface to BCM2708 power management");
++MODULE_LICENSE("GPL");
+diff -urN linux-3.10/arch/arm/mach-bcm2708/vcio.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/vcio.c
+--- linux-3.10/arch/arm/mach-bcm2708/vcio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/vcio.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,474 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/vcio.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This device provides a shared mechanism for writing to the mailboxes,
++ * semaphores, doorbells etc. that are shared between the ARM and the
++ * VideoCore processor
++ */
++
++#if defined(CONFIG_SERIAL_BCM_MBOX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include <linux/module.h>
++#include <linux/console.h>
++#include <linux/serial_core.h>
++#include <linux/serial.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include <linux/sysrq.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++
++#include <linux/io.h>
++
++#include <mach/vcio.h>
++#include <mach/platform.h>
++
++#include <asm/uaccess.h>
++
++
++#define DRIVER_NAME BCM_VCIO_DRIVER_NAME
++
++/* ----------------------------------------------------------------------
++ *	Mailbox
++ * -------------------------------------------------------------------- */
++
++/* offsets from a mail box base address */
++#define MAIL_WRT	0x00	/* write - and next 4 words */
++#define MAIL_RD		0x00	/* read - and next 4 words */
++#define MAIL_POL	0x10	/* read without popping the fifo */
++#define MAIL_SND	0x14	/* sender ID (bottom two bits) */
++#define MAIL_STA	0x18	/* status */
++#define MAIL_CNF	0x1C	/* configuration */
++
++#define MBOX_MSG(chan, data28)		(((data28) & ~0xf) | ((chan) & 0xf))
++#define MBOX_MSG_LSB(chan, data28) (((data28) << 4) | ((chan) & 0xf))
++#define MBOX_CHAN(msg)			((msg) & 0xf)
++#define MBOX_DATA28(msg)		((msg) & ~0xf)
++#define MBOX_DATA28_LSB(msg)		(((uint32_t)msg) >> 4)
++
++#define MBOX_MAGIC 0xd0d0c0de
++
++struct vc_mailbox {
++	struct device *dev;	/* parent device */
++	void __iomem *status;
++	void __iomem *config;
++	void __iomem *read;
++	void __iomem *write;
++	uint32_t msg[MBOX_CHAN_COUNT];
++	struct semaphore sema[MBOX_CHAN_COUNT];
++	uint32_t magic;
++};
++
++static void mbox_init(struct vc_mailbox *mbox_out, struct device *dev,
++		      uint32_t addr_mbox)
++{
++	int i;
++
++	mbox_out->dev = dev;
++	mbox_out->status = __io_address(addr_mbox + MAIL_STA);
++	mbox_out->config = __io_address(addr_mbox + MAIL_CNF);
++	mbox_out->read = __io_address(addr_mbox + MAIL_RD);
++	/* Write to the other mailbox */
++	mbox_out->write =
++	    __io_address((addr_mbox ^ ARM_0_MAIL0_WRT ^ ARM_0_MAIL1_WRT) +
++			 MAIL_WRT);
++
++	for (i = 0; i < MBOX_CHAN_COUNT; i++) {
++		mbox_out->msg[i] = 0;
++		sema_init(&mbox_out->sema[i], 0);
++	}
++
++	/* Enable the interrupt on data reception */
++	writel(ARM_MC_IHAVEDATAIRQEN, mbox_out->config);
++
++	mbox_out->magic = MBOX_MAGIC;
++}
++
++static int mbox_write(struct vc_mailbox *mbox, unsigned chan, uint32_t data28)
++{
++	int rc;
++
++	if (mbox->magic != MBOX_MAGIC)
++		rc = -EINVAL;
++	else {
++		/* wait for the mailbox FIFO to have some space in it */
++		while (0 != (readl(mbox->status) & ARM_MS_FULL))
++			cpu_relax();
++
++		writel(MBOX_MSG(chan, data28), mbox->write);
++		rc = 0;
++	}
++	return rc;
++}
++
++static int mbox_read(struct vc_mailbox *mbox, unsigned chan, uint32_t *data28)
++{
++	int rc;
++
++	if (mbox->magic != MBOX_MAGIC)
++		rc = -EINVAL;
++	else {
++		down(&mbox->sema[chan]);
++		*data28 = MBOX_DATA28(mbox->msg[chan]);
++		mbox->msg[chan] = 0;
++		rc = 0;
++	}
++	return rc;
++}
++
++static irqreturn_t mbox_irq(int irq, void *dev_id)
++{
++	/* wait for the mailbox FIFO to have some data in it */
++	struct vc_mailbox *mbox = (struct vc_mailbox *) dev_id;
++	int status = readl(mbox->status);
++	int ret = IRQ_NONE;
++
++	while (!(status & ARM_MS_EMPTY)) {
++		uint32_t msg = readl(mbox->read);
++		int chan = MBOX_CHAN(msg);
++		if (chan < MBOX_CHAN_COUNT) {
++			if (mbox->msg[chan]) {
++				/* Overflow */
++				printk(KERN_ERR DRIVER_NAME
++				       ": mbox chan %d overflow - drop %08x\n",
++				       chan, msg);
++			} else {
++				mbox->msg[chan] = (msg | 0xf);
++				up(&mbox->sema[chan]);
++			}
++		} else {
++			printk(KERN_ERR DRIVER_NAME
++			       ": invalid channel selector (msg %08x)\n", msg);
++		}
++		ret = IRQ_HANDLED;
++		status = readl(mbox->status);
++	}
++	return ret;
++}
++
++static struct irqaction mbox_irqaction = {
++	.name = "ARM Mailbox IRQ",
++	.flags = IRQF_DISABLED | IRQF_IRQPOLL,
++	.handler = mbox_irq,
++};
++
++/* ----------------------------------------------------------------------
++ *	Mailbox Methods
++ * -------------------------------------------------------------------- */
++
++static struct device *mbox_dev;	/* we assume there's only one! */
++
++static int dev_mbox_write(struct device *dev, unsigned chan, uint32_t data28)
++{
++	int rc;
++
++	struct vc_mailbox *mailbox = dev_get_drvdata(dev);
++	device_lock(dev);
++	rc = mbox_write(mailbox, chan, data28);
++	device_unlock(dev);
++
++	return rc;
++}
++
++static int dev_mbox_read(struct device *dev, unsigned chan, uint32_t *data28)
++{
++	int rc;
++
++	struct vc_mailbox *mailbox = dev_get_drvdata(dev);
++	device_lock(dev);
++	rc = mbox_read(mailbox, chan, data28);
++	device_unlock(dev);
++
++	return rc;
++}
++
++extern int bcm_mailbox_write(unsigned chan, uint32_t data28)
++{
++	if (mbox_dev)
++		return dev_mbox_write(mbox_dev, chan, data28);
++	else
++		return -ENODEV;
++}
++EXPORT_SYMBOL_GPL(bcm_mailbox_write);
++
++extern int bcm_mailbox_read(unsigned chan, uint32_t *data28)
++{
++	if (mbox_dev)
++		return dev_mbox_read(mbox_dev, chan, data28);
++	else
++		return -ENODEV;
++}
++EXPORT_SYMBOL_GPL(bcm_mailbox_read);
++
++static void dev_mbox_register(const char *dev_name, struct device *dev)
++{
++	mbox_dev = dev;
++}
++
++static int mbox_copy_from_user(void *dst, const void *src, int size)
++{
++	if ( (uint32_t)src < TASK_SIZE)
++	{
++		return copy_from_user(dst, src, size);
++	}
++	else
++	{
++		memcpy( dst, src, size );
++		return 0;
++	}
++}
++
++static int mbox_copy_to_user(void *dst, const void *src, int size)
++{
++	if ( (uint32_t)dst < TASK_SIZE)
++	{
++		return copy_to_user(dst, src, size);
++	}
++	else
++	{
++		memcpy( dst, src, size );
++		return 0;
++	}
++}
++
++static DEFINE_MUTEX(mailbox_lock);
++extern int bcm_mailbox_property(void *data, int size)
++{
++	uint32_t success;
++	dma_addr_t mem_bus;				/* the memory address accessed from videocore */
++	void *mem_kern;					/* the memory address accessed from driver */
++	int s = 0;
++
++        mutex_lock(&mailbox_lock);
++	/* allocate some memory for the messages communicating with GPU */
++	mem_kern = dma_alloc_coherent(NULL, PAGE_ALIGN(size), &mem_bus, GFP_ATOMIC);
++	if (mem_kern) {
++		/* create the message */
++		mbox_copy_from_user(mem_kern, data, size);
++
++		/* send the message */
++		wmb();
++		s = bcm_mailbox_write(MBOX_CHAN_PROPERTY, (uint32_t)mem_bus);
++		if (s == 0) {
++			s = bcm_mailbox_read(MBOX_CHAN_PROPERTY, &success);
++		}
++		if (s == 0) {
++			/* copy the response */
++			rmb();
++			mbox_copy_to_user(data, mem_kern, size);
++		}
++		dma_free_coherent(NULL, PAGE_ALIGN(size), mem_kern, mem_bus);
++	} else {
++		s = -ENOMEM;
++	}
++	if (s != 0)
++		printk(KERN_ERR DRIVER_NAME ": %s failed (%d)\n", __func__, s);
++
++        mutex_unlock(&mailbox_lock);
++	return s;
++}
++EXPORT_SYMBOL_GPL(bcm_mailbox_property);
++
++/* ----------------------------------------------------------------------
++ *	Platform Device for Mailbox
++ * -------------------------------------------------------------------- */
++
++/* 
++ * Is the device open right now? Used to prevent
++ * concurent access into the same device 
++ */
++static int Device_Open = 0;
++
++/* 
++ * This is called whenever a process attempts to open the device file 
++ */
++static int device_open(struct inode *inode, struct file *file)
++{
++	/* 
++	 * We don't want to talk to two processes at the same time 
++	 */
++	if (Device_Open)
++		return -EBUSY;
++
++	Device_Open++;
++	/*
++	 * Initialize the message 
++	 */
++	try_module_get(THIS_MODULE);
++	return 0;
++}
++
++static int device_release(struct inode *inode, struct file *file)
++{
++	/* 
++	 * We're now ready for our next caller 
++	 */
++	Device_Open--;
++
++	module_put(THIS_MODULE);
++	return 0;
++}
++
++/* 
++ * This function is called whenever a process tries to do an ioctl on our
++ * device file. We get two extra parameters (additional to the inode and file
++ * structures, which all device functions get): the number of the ioctl called
++ * and the parameter given to the ioctl function.
++ *
++ * If the ioctl is write or read/write (meaning output is returned to the
++ * calling process), the ioctl call returns the output of this function.
++ *
++ */
++static long device_ioctl(struct file *file,	/* see include/linux/fs.h */
++		 unsigned int ioctl_num,	/* number and param for ioctl */
++		 unsigned long ioctl_param)
++{
++	unsigned size;
++	/* 
++	 * Switch according to the ioctl called 
++	 */
++	switch (ioctl_num) {
++	case IOCTL_MBOX_PROPERTY:
++		/* 
++		 * Receive a pointer to a message (in user space) and set that
++		 * to be the device's message.  Get the parameter given to 
++		 * ioctl by the process. 
++		 */
++		mbox_copy_from_user(&size, (void *)ioctl_param, sizeof size);
++		return bcm_mailbox_property((void *)ioctl_param, size);
++		break;
++	default:
++		printk(KERN_ERR DRIVER_NAME "unknown ioctl: %d\n", ioctl_num);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/* Module Declarations */
++
++/* 
++ * This structure will hold the functions to be called
++ * when a process does something to the device we
++ * created. Since a pointer to this structure is kept in
++ * the devices table, it can't be local to
++ * init_module. NULL is for unimplemented functios. 
++ */
++struct file_operations fops = {
++	.unlocked_ioctl = device_ioctl,
++	.open = device_open,
++	.release = device_release,	/* a.k.a. close */
++};
++
++static int bcm_vcio_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++	struct vc_mailbox *mailbox;
++
++	mailbox = kzalloc(sizeof(*mailbox), GFP_KERNEL);
++	if (NULL == mailbox) {
++		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
++		       "mailbox memory\n");
++		ret = -ENOMEM;
++	} else {
++		struct resource *res;
++
++		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++		if (res == NULL) {
++			printk(KERN_ERR DRIVER_NAME ": failed to obtain memory "
++			       "resource\n");
++			ret = -ENODEV;
++			kfree(mailbox);
++		} else {
++			/* should be based on the registers from res really */
++			mbox_init(mailbox, &pdev->dev, ARM_0_MAIL0_RD);
++
++			platform_set_drvdata(pdev, mailbox);
++			dev_mbox_register(DRIVER_NAME, &pdev->dev);
++
++			mbox_irqaction.dev_id = mailbox;
++			setup_irq(IRQ_ARM_MAILBOX, &mbox_irqaction);
++			printk(KERN_INFO DRIVER_NAME ": mailbox at %p\n",
++			       __io_address(ARM_0_MAIL0_RD));
++		}
++	}
++
++	if (ret == 0) {
++		/* 
++		 * Register the character device
++		 */
++		ret = register_chrdev(MAJOR_NUM, DEVICE_FILE_NAME, &fops);
++
++		/* 
++		 * Negative values signify an error 
++		 */
++		if (ret < 0) {
++			printk(KERN_ERR DRIVER_NAME
++			       "Failed registering the character device %d\n", ret);
++			return ret;
++		}
++	}
++	return ret;
++}
++
++static int bcm_vcio_remove(struct platform_device *pdev)
++{
++	struct vc_mailbox *mailbox = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++	kfree(mailbox);
++
++	return 0;
++}
++
++static struct platform_driver bcm_mbox_driver = {
++	.probe = bcm_vcio_probe,
++	.remove = bcm_vcio_remove,
++
++	.driver = {
++		   .name = DRIVER_NAME,
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static int __init bcm_mbox_init(void)
++{
++	int ret;
++
++	printk(KERN_INFO "mailbox: Broadcom VideoCore Mailbox driver\n");
++
++	ret = platform_driver_register(&bcm_mbox_driver);
++	if (ret != 0) {
++		printk(KERN_ERR DRIVER_NAME ": failed to register "
++		       "on platform\n");
++	} 
++
++	return ret;
++}
++
++static void __exit bcm_mbox_exit(void)
++{
++	platform_driver_unregister(&bcm_mbox_driver);
++}
++
++arch_initcall(bcm_mbox_init);	/* Initialize early */
++module_exit(bcm_mbox_exit);
++
++MODULE_AUTHOR("Gray Girling");
++MODULE_DESCRIPTION("ARM I/O to VideoCore processor");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:bcm-mbox");
+diff -urN linux-3.10/arch/arm/mach-bcm2708/vc_mem.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/vc_mem.c
+--- linux-3.10/arch/arm/mach-bcm2708/vc_mem.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/vc_mem.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,462 @@
++/*****************************************************************************
++* Copyright 2010 - 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/fs.h>
++#include <linux/device.h>
++#include <linux/cdev.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/proc_fs.h>
++#include <asm/uaccess.h>
++#include <linux/dma-mapping.h>
++
++#ifdef CONFIG_ARCH_KONA
++#include <chal/chal_ipc.h>
++#elif CONFIG_ARCH_BCM2708
++#else
++#include <csp/chal_ipc.h>
++#endif
++
++#include "mach/vc_mem.h"
++#include <mach/vcio.h>
++
++#define DRIVER_NAME  "vc-mem"
++
++// Uncomment to enable debug logging
++// #define ENABLE_DBG
++
++#if defined(ENABLE_DBG)
++#define LOG_DBG( fmt, ... )  printk( KERN_INFO fmt "\n", ##__VA_ARGS__ )
++#else
++#define LOG_DBG( fmt, ... )
++#endif
++#define LOG_ERR( fmt, ... )  printk( KERN_ERR fmt "\n", ##__VA_ARGS__ )
++
++// Device (/dev) related variables
++static dev_t vc_mem_devnum = 0;
++static struct class *vc_mem_class = NULL;
++static struct cdev vc_mem_cdev;
++static int vc_mem_inited = 0;
++
++// Proc entry
++static struct proc_dir_entry *vc_mem_proc_entry;
++
++/*
++ * Videocore memory addresses and size
++ *
++ * Drivers that wish to know the videocore memory addresses and sizes should
++ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in
++ * headers. This allows the other drivers to not be tied down to a a certain
++ * address/size at compile time.
++ *
++ * In the future, the goal is to have the videocore memory virtual address and
++ * size be calculated at boot time rather than at compile time. The decision of
++ * where the videocore memory resides and its size would be in the hands of the
++ * bootloader (and/or kernel). When that happens, the values of these variables
++ * would be calculated and assigned in the init function.
++ */
++// in the 2835 VC in mapped above ARM, but ARM has full access to VC space
++unsigned long mm_vc_mem_phys_addr = 0x00000000;
++unsigned int mm_vc_mem_size = 0;
++unsigned int mm_vc_mem_base = 0;
++
++EXPORT_SYMBOL(mm_vc_mem_phys_addr);
++EXPORT_SYMBOL(mm_vc_mem_size);
++EXPORT_SYMBOL(mm_vc_mem_base);
++
++static uint phys_addr = 0;
++static uint mem_size = 0;
++static uint mem_base = 0;
++
++
++/****************************************************************************
++*
++*   vc_mem_open
++*
++***************************************************************************/
++
++static int
++vc_mem_open(struct inode *inode, struct file *file)
++{
++	(void) inode;
++	(void) file;
++
++	LOG_DBG("%s: called file = 0x%p", __func__, file);
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_mem_release
++*
++***************************************************************************/
++
++static int
++vc_mem_release(struct inode *inode, struct file *file)
++{
++	(void) inode;
++	(void) file;
++
++	LOG_DBG("%s: called file = 0x%p", __func__, file);
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_mem_get_size
++*
++***************************************************************************/
++
++static void
++vc_mem_get_size(void)
++{
++}
++
++/****************************************************************************
++*
++*   vc_mem_get_base
++*
++***************************************************************************/
++
++static void
++vc_mem_get_base(void)
++{
++}
++
++/****************************************************************************
++*
++*   vc_mem_get_current_size
++*
++***************************************************************************/
++
++int
++vc_mem_get_current_size(void)
++{
++	return mm_vc_mem_size;
++}
++
++EXPORT_SYMBOL_GPL(vc_mem_get_current_size);
++
++/****************************************************************************
++*
++*   vc_mem_ioctl
++*
++***************************************************************************/
++
++static long
++vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	int rc = 0;
++
++	(void) cmd;
++	(void) arg;
++
++	LOG_DBG("%s: called file = 0x%p", __func__, file);
++
++	switch (cmd) {
++	case VC_MEM_IOC_MEM_PHYS_ADDR:
++		{
++			LOG_DBG("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p",
++				__func__, (void *) mm_vc_mem_phys_addr);
++
++			if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr,
++					 sizeof (mm_vc_mem_phys_addr)) != 0) {
++				rc = -EFAULT;
++			}
++			break;
++		}
++	case VC_MEM_IOC_MEM_SIZE:
++		{
++			// Get the videocore memory size first
++			vc_mem_get_size();
++
++			LOG_DBG("%s: VC_MEM_IOC_MEM_SIZE=%u", __func__,
++				mm_vc_mem_size);
++
++			if (copy_to_user((void *) arg, &mm_vc_mem_size,
++					 sizeof (mm_vc_mem_size)) != 0) {
++				rc = -EFAULT;
++			}
++			break;
++		}
++	case VC_MEM_IOC_MEM_BASE:
++		{
++			// Get the videocore memory base
++			vc_mem_get_base();
++
++			LOG_DBG("%s: VC_MEM_IOC_MEM_BASE=%u", __func__,
++				mm_vc_mem_base);
++
++			if (copy_to_user((void *) arg, &mm_vc_mem_base,
++					 sizeof (mm_vc_mem_base)) != 0) {
++				rc = -EFAULT;
++			}
++			break;
++		}
++	case VC_MEM_IOC_MEM_LOAD:
++		{
++			// Get the videocore memory base
++			vc_mem_get_base();
++
++			LOG_DBG("%s: VC_MEM_IOC_MEM_LOAD=%u", __func__,
++				mm_vc_mem_base);
++
++			if (copy_to_user((void *) arg, &mm_vc_mem_base,
++					 sizeof (mm_vc_mem_base)) != 0) {
++				rc = -EFAULT;
++			}
++			break;
++		}
++	default:
++		{
++			return -ENOTTY;
++		}
++	}
++	LOG_DBG("%s: file = 0x%p returning %d", __func__, file, rc);
++
++	return rc;
++}
++
++/****************************************************************************
++*
++*   vc_mem_mmap
++*
++***************************************************************************/
++
++static int
++vc_mem_mmap(struct file *filp, struct vm_area_struct *vma)
++{
++	int rc = 0;
++	unsigned long length = vma->vm_end - vma->vm_start;
++	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
++
++	LOG_DBG("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx",
++		__func__, (long) vma->vm_start, (long) vma->vm_end,
++		(long) vma->vm_pgoff);
++
++	if (offset + length > mm_vc_mem_size) {
++		LOG_ERR("%s: length %ld is too big", __func__, length);
++		return -EINVAL;
++	}
++	// Do not cache the memory map
++	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
++
++	rc = remap_pfn_range(vma, vma->vm_start,
++			     (mm_vc_mem_phys_addr >> PAGE_SHIFT) +
++			     vma->vm_pgoff, length, vma->vm_page_prot);
++	if (rc != 0) {
++		LOG_ERR("%s: remap_pfn_range failed (rc=%d)", __func__, rc);
++	}
++
++	return rc;
++}
++
++/****************************************************************************
++*
++*   File Operations for the driver.
++*
++***************************************************************************/
++
++static const struct file_operations vc_mem_fops = {
++	.owner = THIS_MODULE,
++	.open = vc_mem_open,
++	.release = vc_mem_release,
++	.unlocked_ioctl = vc_mem_ioctl,
++	.mmap = vc_mem_mmap,
++};
++
++/****************************************************************************
++*
++*   vc_mem_proc_read
++*
++***************************************************************************/
++
++static int
++vc_mem_proc_read(char *buf, char **start, off_t offset, int count, int *eof,
++		 void *data)
++{
++	char *p = buf;
++
++	(void) start;
++	(void) count;
++	(void) data;
++
++	if (offset > 0) {
++		*eof = 1;
++		return 0;
++	}
++	// Get the videocore memory size first
++	vc_mem_get_size();
++
++	p += sprintf(p, "Videocore memory:\n");
++	if (mm_vc_mem_phys_addr != 0)
++		p += sprintf(p, "   Physical address: 0x%p\n",
++			     (void *) mm_vc_mem_phys_addr);
++	else
++		p += sprintf(p, "   Physical address: 0x00000000\n");
++	p += sprintf(p, "   Length (bytes):   %u\n", mm_vc_mem_size);
++
++	*eof = 1;
++	return p - buf;
++}
++
++/****************************************************************************
++*
++*   vc_mem_proc_write
++*
++***************************************************************************/
++
++static int
++vc_mem_proc_write(struct file *file, const char __user * buffer,
++		  unsigned long count, void *data)
++{
++	int rc = -EFAULT;
++	char input_str[10];
++
++	memset(input_str, 0, sizeof (input_str));
++
++	if (count > sizeof (input_str)) {
++		LOG_ERR("%s: input string length too long", __func__);
++		goto out;
++	}
++
++	if (copy_from_user(input_str, buffer, count - 1)) {
++		LOG_ERR("%s: failed to get input string", __func__);
++		goto out;
++	}
++
++	if (strncmp(input_str, "connect", strlen("connect")) == 0) {
++		// Get the videocore memory size from the videocore
++		vc_mem_get_size();
++	}
++
++      out:
++	return rc;
++}
++
++/****************************************************************************
++*
++*   vc_mem_init
++*
++***************************************************************************/
++
++static int __init
++vc_mem_init(void)
++{
++	int rc = -EFAULT;
++	struct device *dev;
++
++	LOG_DBG("%s: called", __func__);
++
++	mm_vc_mem_phys_addr = phys_addr;
++	mm_vc_mem_size = mem_size;
++	mm_vc_mem_base = mem_base;
++
++	vc_mem_get_size();
++
++	printk("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n",
++		mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024));
++
++	if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) {
++		LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc);
++		goto out_err;
++	}
++
++	cdev_init(&vc_mem_cdev, &vc_mem_fops);
++	if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) {
++		LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc);
++		goto out_unregister;
++	}
++
++	vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME);
++	if (IS_ERR(vc_mem_class)) {
++		rc = PTR_ERR(vc_mem_class);
++		LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc);
++		goto out_cdev_del;
++	}
++
++	dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL,
++			    DRIVER_NAME);
++	if (IS_ERR(dev)) {
++		rc = PTR_ERR(dev);
++		LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc);
++		goto out_class_destroy;
++	}
++
++#if 0
++	vc_mem_proc_entry = create_proc_entry(DRIVER_NAME, 0444, NULL);
++	if (vc_mem_proc_entry == NULL) {
++		rc = -EFAULT;
++		LOG_ERR("%s: create_proc_entry failed", __func__);
++		goto out_device_destroy;
++	}
++	vc_mem_proc_entry->read_proc = vc_mem_proc_read;
++	vc_mem_proc_entry->write_proc = vc_mem_proc_write;
++#endif
++
++	vc_mem_inited = 1;
++	return 0;
++
++      out_device_destroy:
++	device_destroy(vc_mem_class, vc_mem_devnum);
++
++      out_class_destroy:
++	class_destroy(vc_mem_class);
++	vc_mem_class = NULL;
++
++      out_cdev_del:
++	cdev_del(&vc_mem_cdev);
++
++      out_unregister:
++	unregister_chrdev_region(vc_mem_devnum, 1);
++
++      out_err:
++	return -1;
++}
++
++/****************************************************************************
++*
++*   vc_mem_exit
++*
++***************************************************************************/
++
++static void __exit
++vc_mem_exit(void)
++{
++	LOG_DBG("%s: called", __func__);
++
++	if (vc_mem_inited) {
++#if 0
++		remove_proc_entry(vc_mem_proc_entry->name, NULL);
++#endif
++		device_destroy(vc_mem_class, vc_mem_devnum);
++		class_destroy(vc_mem_class);
++		cdev_del(&vc_mem_cdev);
++		unregister_chrdev_region(vc_mem_devnum, 1);
++	}
++}
++
++module_init(vc_mem_init);
++module_exit(vc_mem_exit);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Broadcom Corporation");
++
++module_param(phys_addr, uint, 0644);
++module_param(mem_size, uint, 0644);
++module_param(mem_base, uint, 0644);
++
+diff -urN linux-3.10/arch/arm/mach-bcm2708/vc_support.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/vc_support.c
+--- linux-3.10/arch/arm/mach-bcm2708/vc_support.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/vc_support.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,319 @@
++/*
++ * vc_support.c
++ *
++ *  Created on: 25 Nov 2012
++ *      Author: Simon
++ */
++
++#include <linux/module.h>
++#include <mach/vcio.h>
++
++#ifdef ECLIPSE_IGNORE
++
++#define __user
++#define __init
++#define __exit
++#define __iomem
++#define KERN_DEBUG
++#define KERN_ERR
++#define KERN_WARNING
++#define KERN_INFO
++#define _IOWR(a, b, c) b
++#define _IOW(a, b, c) b
++#define _IO(a, b) b
++
++#endif
++
++/****** VC MAILBOX FUNCTIONALITY ******/
++unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_size;
++					unsigned int m_handle;
++				};
++				unsigned int m_alignment;
++				unsigned int m_flags;
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the allocation command
++	msg.m_tag.m_tagId = 0x3000c;
++	msg.m_tag.m_sendBufferSize = 12;
++	msg.m_tag.m_sendDataSize = 12;
++
++	//fill in our args
++	msg.m_tag.m_args.m_size = size;
++	msg.m_tag.m_args.m_alignment = alignment;
++	msg.m_tag.m_args.m_flags = flags;
++
++	//run the command
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004)
++	{
++		*pHandle = msg.m_tag.m_args.m_handle;
++		return 0;
++	}
++	else
++	{
++		printk(KERN_ERR "failed to allocate vc memory: s=%d response=%08x recv data size=%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize);
++		return 1;
++	}
++}
++
++unsigned int ReleaseVcMemory(unsigned int handle)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_handle;
++					unsigned int m_error;
++				};
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the release command
++	msg.m_tag.m_tagId = 0x3000f;
++	msg.m_tag.m_sendBufferSize = 4;
++	msg.m_tag.m_sendDataSize = 4;
++
++	//pass across the handle
++	msg.m_tag.m_args.m_handle = handle;
++
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0)
++		return 0;
++	else
++	{
++		printk(KERN_ERR "failed to release vc memory: s=%d response=%08x recv data size=%08x error=%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error);
++		return 1;
++	}
++}
++
++unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_handle;
++					unsigned int m_busAddress;
++				};
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the lock command
++	msg.m_tag.m_tagId = 0x3000d;
++	msg.m_tag.m_sendBufferSize = 4;
++	msg.m_tag.m_sendDataSize = 4;
++
++	//pass across the handle
++	msg.m_tag.m_args.m_handle = handle;
++
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004)
++	{
++		//pick out the bus address
++		*pBusAddress = msg.m_tag.m_args.m_busAddress;
++		return 0;
++	}
++	else
++	{
++		printk(KERN_ERR "failed to lock vc memory: s=%d response=%08x recv data size=%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize);
++		return 1;
++	}
++}
++
++unsigned int UnlockVcMemory(unsigned int handle)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_handle;
++					unsigned int m_error;
++				};
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the unlock command
++	msg.m_tag.m_tagId = 0x3000e;
++	msg.m_tag.m_sendBufferSize = 4;
++	msg.m_tag.m_sendDataSize = 4;
++
++	//pass across the handle
++	msg.m_tag.m_args.m_handle = handle;
++
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	//check the error code too
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0)
++		return 0;
++	else
++	{
++		printk(KERN_ERR "failed to unlock vc memory: s=%d response=%08x recv data size=%08x error%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error);
++		return 1;
++	}
++}
++
++unsigned int ExecuteVcCode(unsigned int code,
++		unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_pCode;
++					unsigned int m_return;
++				};
++				unsigned int m_r0;
++				unsigned int m_r1;
++				unsigned int m_r2;
++				unsigned int m_r3;
++				unsigned int m_r4;
++				unsigned int m_r5;
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the unlock command
++	msg.m_tag.m_tagId = 0x30010;
++	msg.m_tag.m_sendBufferSize = 28;
++	msg.m_tag.m_sendDataSize = 28;
++
++	//pass across the handle
++	msg.m_tag.m_args.m_pCode = code;
++	msg.m_tag.m_args.m_r0 = r0;
++	msg.m_tag.m_args.m_r1 = r1;
++	msg.m_tag.m_args.m_r2 = r2;
++	msg.m_tag.m_args.m_r3 = r3;
++	msg.m_tag.m_args.m_r4 = r4;
++	msg.m_tag.m_args.m_r5 = r5;
++
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	//check the error code too
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004)
++		return msg.m_tag.m_args.m_return;
++	else
++	{
++		printk(KERN_ERR "failed to execute: s=%d response=%08x recv data size=%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize);
++		return 1;
++	}
++}
++
+diff -urN linux-3.10/arch/arm/Makefile linux-rpi-3.10.y/arch/arm/Makefile
+--- linux-3.10/arch/arm/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -139,6 +139,7 @@
+ # by CONFIG_* macro name.
+ machine-$(CONFIG_ARCH_AT91)		+= at91
+ machine-$(CONFIG_ARCH_BCM)		+= bcm
++machine-$(CONFIG_ARCH_BCM2708)		+= bcm2708
+ machine-$(CONFIG_ARCH_BCM2835)		+= bcm2835
+ machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
+ machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
+diff -urN linux-3.10/arch/arm/mm/Kconfig linux-rpi-3.10.y/arch/arm/mm/Kconfig
+--- linux-3.10/arch/arm/mm/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mm/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -358,7 +358,7 @@
+ 
+ # ARMv6
+ config CPU_V6
+-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
++	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || MACH_BCM2708
+ 	select CPU_32v6
+ 	select CPU_ABRT_EV6
+ 	select CPU_CACHE_V6
+diff -urN linux-3.10/arch/arm/mm/proc-v6.S linux-rpi-3.10.y/arch/arm/mm/proc-v6.S
+--- linux-3.10/arch/arm/mm/proc-v6.S	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/mm/proc-v6.S	2013-07-06 15:25:50.000000000 +0100
+@@ -73,10 +73,19 @@
+  *
+  *	IRQs are already disabled.
+  */
++
++/* See jira SW-5991 for details of this workaround */
+ ENTRY(cpu_v6_do_idle)
+-	mov	r1, #0
+-	mcr	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
+-	mcr	p15, 0, r1, c7, c0, 4		@ wait for interrupt
++	.align 5
++	mov     r1, #2
++1:	subs	r1, #1
++	nop
++	mcreq	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
++	mcreq	p15, 0, r1, c7, c0, 4		@ wait for interrupt
++	nop
++	nop
++	nop
++	bne 1b
+ 	mov	pc, lr
+ 
+ ENTRY(cpu_v6_dcache_clean_area)
+diff -urN linux-3.10/arch/arm/tools/mach-types linux-rpi-3.10.y/arch/arm/tools/mach-types
+--- linux-3.10/arch/arm/tools/mach-types	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/arch/arm/tools/mach-types	2013-07-06 15:25:50.000000000 +0100
+@@ -522,6 +522,7 @@
+ prima2_evb		MACH_PRIMA2_EVB		PRIMA2_EVB		3103
+ paz00			MACH_PAZ00		PAZ00			3128
+ acmenetusfoxg20		MACH_ACMENETUSFOXG20	ACMENETUSFOXG20		3129
++bcm2708			MACH_BCM2708		BCM2708			3138
+ ag5evm			MACH_AG5EVM		AG5EVM			3189
+ ics_if_voip		MACH_ICS_IF_VOIP	ICS_IF_VOIP		3206
+ wlf_cragg_6410		MACH_WLF_CRAGG_6410	WLF_CRAGG_6410		3207
diff --git a/target/linux/brcm2708/patches-3.10/003-bcm2708-watchdog-driver.patch b/target/linux/brcm2708/patches-3.10/003-bcm2708-watchdog-driver.patch
new file mode 100644
index 0000000000..fb0ea33d62
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/003-bcm2708-watchdog-driver.patch
@@ -0,0 +1,416 @@
+diff -urN linux-3.10/drivers/watchdog/bcm2708_wdog.c linux-rpi-3.10.y/drivers/watchdog/bcm2708_wdog.c
+--- linux-3.10/drivers/watchdog/bcm2708_wdog.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/watchdog/bcm2708_wdog.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,385 @@
++/*
++ *	Broadcom BCM2708 watchdog driver.
++ *
++ *	(c) Copyright 2010 Broadcom Europe Ltd
++ *
++ *	This program is free software; you can redistribute it and/or
++ *	modify it under the terms of the GNU General Public License
++ *	as published by the Free Software Foundation; either version
++ *	2 of the License, or (at your option) any later version.
++ *
++ *      BCM2708 watchdog driver. Loosely based on wdt driver.
++ */
++
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/fs.h>
++#include <linux/ioport.h>
++#include <linux/notifier.h>
++#include <linux/reboot.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/uaccess.h>
++#include <mach/platform.h>
++
++#include <asm/system.h>
++
++#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
++#define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
++
++static unsigned long wdog_is_open;
++static uint32_t wdog_ticks;	       /* Ticks to load into wdog timer */
++static char expect_close;
++
++/*
++ *	Module parameters
++ */
++
++#define WD_TIMO 10		       /* Default heartbeat = 60 seconds */
++static int heartbeat = WD_TIMO;	       /* Heartbeat in seconds */
++
++module_param(heartbeat, int, 0);
++MODULE_PARM_DESC(heartbeat,
++	"Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default="
++				__MODULE_STRING(WD_TIMO) ")");
++
++static int nowayout = WATCHDOG_NOWAYOUT;
++module_param(nowayout, int, 0);
++MODULE_PARM_DESC(nowayout,
++	"Watchdog cannot be stopped once started (default="
++				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++
++static DEFINE_SPINLOCK(wdog_lock);
++
++/**
++ *	Start the watchdog driver.
++ */
++
++static int wdog_start(unsigned long timeout)
++{
++	uint32_t cur;
++	unsigned long flags;
++	spin_lock_irqsave(&wdog_lock, flags);
++
++	/* enable the watchdog */
++	iowrite32(PM_PASSWORD | (timeout & PM_WDOG_TIME_SET), 
++		  __io_address(PM_WDOG));
++	cur = ioread32(__io_address(PM_RSTC));
++	iowrite32(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) |
++		  PM_RSTC_WRCFG_FULL_RESET, __io_address(PM_RSTC));
++
++	spin_unlock_irqrestore(&wdog_lock, flags);
++	return 0;
++}
++
++/**
++ *	Stop the watchdog driver.
++ */
++
++static int wdog_stop(void)
++{
++	iowrite32(PM_PASSWORD | PM_RSTC_RESET, __io_address(PM_RSTC));
++	printk(KERN_INFO "watchdog stopped\n");
++	return 0;
++}
++
++/**
++ *	Reload counter one with the watchdog heartbeat. We don't bother
++ *	reloading the cascade counter.
++ */
++
++static void wdog_ping(void)
++{
++	wdog_start(wdog_ticks);
++}
++
++/**
++ *	@t:		the new heartbeat value that needs to be set.
++ *
++ *	Set a new heartbeat value for the watchdog device. If the heartbeat
++ *	value is incorrect we keep the old value and return -EINVAL. If
++ *	successful we return 0.
++ */
++
++static int wdog_set_heartbeat(int t)
++{
++	if (t < 1 || t > WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET))
++		return -EINVAL;
++
++	heartbeat = t;
++	wdog_ticks = SECS_TO_WDOG_TICKS(t);
++	return 0;
++}
++
++/**
++ *	@file: file handle to the watchdog
++ *	@buf: buffer to write (unused as data does not matter here
++ *	@count: count of bytes
++ *	@ppos: pointer to the position to write. No seeks allowed
++ *
++ *	A write to a watchdog device is defined as a keepalive signal.
++ *	
++ *      if 'nowayout' is set then normally a close() is ignored. But
++ *      if you write 'V' first then the close() will stop the timer.
++ */
++
++static ssize_t wdog_write(struct file *file, const char __user *buf,
++						size_t count, loff_t *ppos)
++{
++	if (count) {
++		if (!nowayout) {
++			size_t i;
++
++			/* In case it was set long ago */
++			expect_close = 0;
++
++			for (i = 0; i != count; i++) {
++				char c;
++				if (get_user(c, buf + i))
++					return -EFAULT;
++				if (c == 'V')
++					expect_close = 42;
++			}
++		}
++		wdog_ping();
++	}
++	return count;
++}
++
++static int wdog_get_status(void)
++{
++	unsigned long flags;
++	int status = 0;
++	spin_lock_irqsave(&wdog_lock, flags);
++	/* FIXME: readback reset reason */
++	spin_unlock_irqrestore(&wdog_lock, flags);
++	return status;
++}
++
++static uint32_t wdog_get_remaining(void)
++{
++	uint32_t ret = ioread32(__io_address(PM_WDOG));
++	return ret & PM_WDOG_TIME_SET;
++}
++
++/**
++ *	@file: file handle to the device
++ *	@cmd: watchdog command
++ *	@arg: argument pointer
++ *
++ *	The watchdog API defines a common set of functions for all watchdogs
++ *	according to their available features. We only actually usefully support
++ *	querying capabilities and current status.
++ */
++
++static long wdog_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	void __user *argp = (void __user *)arg;
++	int __user *p = argp;
++	int new_heartbeat;
++	int status;
++	int options;
++	uint32_t remaining;
++
++	struct watchdog_info ident = {
++		.options =		WDIOF_SETTIMEOUT|
++					WDIOF_MAGICCLOSE|
++					WDIOF_KEEPALIVEPING,
++		.firmware_version =	1,
++		.identity =		"BCM2708",
++	};
++
++	switch (cmd) {
++	case WDIOC_GETSUPPORT:
++		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
++	case WDIOC_GETSTATUS:
++		status = wdog_get_status();
++		return put_user(status, p);
++	case WDIOC_GETBOOTSTATUS:
++		return put_user(0, p);
++	case WDIOC_KEEPALIVE:
++		wdog_ping();
++		return 0;
++	case WDIOC_SETTIMEOUT:
++		if (get_user(new_heartbeat, p))
++			return -EFAULT;
++		if (wdog_set_heartbeat(new_heartbeat))
++			return -EINVAL;
++		wdog_ping();
++		/* Fall */
++	case WDIOC_GETTIMEOUT:
++		return put_user(heartbeat, p);
++	case WDIOC_GETTIMELEFT:
++		remaining = WDOG_TICKS_TO_SECS(wdog_get_remaining());
++		return put_user(remaining, p);
++	case WDIOC_SETOPTIONS:
++		if (get_user(options, p))
++			return -EFAULT;
++		if (options & WDIOS_DISABLECARD)
++			wdog_stop();
++		if (options & WDIOS_ENABLECARD)
++			wdog_start(wdog_ticks);
++		return 0;
++	default:
++		return -ENOTTY;
++	}
++}
++
++/**
++ *	@inode: inode of device
++ *	@file: file handle to device
++ *
++ *	The watchdog device has been opened. The watchdog device is single
++ *	open and on opening we load the counters.
++ */
++
++static int wdog_open(struct inode *inode, struct file *file)
++{
++	if (test_and_set_bit(0, &wdog_is_open))
++		return -EBUSY;
++	/*
++	 *	Activate
++	 */
++	wdog_start(wdog_ticks);
++	return nonseekable_open(inode, file);
++}
++
++/**
++ *	@inode: inode to board
++ *	@file: file handle to board
++ *
++ *	The watchdog has a configurable API. There is a religious dispute
++ *	between people who want their watchdog to be able to shut down and
++ *	those who want to be sure if the watchdog manager dies the machine
++ *	reboots. In the former case we disable the counters, in the latter
++ *	case you have to open it again very soon.
++ */
++
++static int wdog_release(struct inode *inode, struct file *file)
++{
++	if (expect_close == 42) {
++		wdog_stop();
++	} else {
++		printk(KERN_CRIT
++		 "wdt: WDT device closed unexpectedly.  WDT will not stop!\n");
++		wdog_ping();
++	}
++	clear_bit(0, &wdog_is_open);
++	expect_close = 0;
++	return 0;
++}
++
++/**
++ *	@this: our notifier block
++ *	@code: the event being reported
++ *	@unused: unused
++ *
++ *	Our notifier is called on system shutdowns. Turn the watchdog
++ *	off so that it does not fire during the next reboot.
++ */
++
++static int wdog_notify_sys(struct notifier_block *this, unsigned long code,
++	void *unused)
++{
++	if (code == SYS_DOWN || code == SYS_HALT)
++		wdog_stop();
++	return NOTIFY_DONE;
++}
++
++/*
++ *	Kernel Interfaces
++ */
++
++
++static const struct file_operations wdog_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.write		= wdog_write,
++	.unlocked_ioctl	= wdog_ioctl,
++	.open		= wdog_open,
++	.release	= wdog_release,
++};
++
++static struct miscdevice wdog_miscdev = {
++	.minor	= WATCHDOG_MINOR,
++	.name	= "watchdog",
++	.fops	= &wdog_fops,
++};
++
++/*
++ *	The WDT card needs to learn about soft shutdowns in order to
++ *	turn the timebomb registers off.
++ */
++
++static struct notifier_block wdog_notifier = {
++	.notifier_call = wdog_notify_sys,
++};
++
++/**
++ *	cleanup_module:
++ *
++ *	Unload the watchdog. You cannot do this with any file handles open.
++ *	If your watchdog is set to continue ticking on close and you unload
++ *	it, well it keeps ticking. We won't get the interrupt but the board
++ *	will not touch PC memory so all is fine. You just have to load a new
++ *	module in 60 seconds or reboot.
++ */
++
++static void __exit wdog_exit(void)
++{
++	misc_deregister(&wdog_miscdev);
++	unregister_reboot_notifier(&wdog_notifier);
++}
++
++static int __init wdog_init(void)
++{
++	int ret;
++
++	/* Check that the heartbeat value is within it's range;
++	   if not reset to the default */
++	if (wdog_set_heartbeat(heartbeat)) {
++		wdog_set_heartbeat(WD_TIMO);
++		printk(KERN_INFO "bcm2708_wdog: heartbeat value must be "
++			"0 < heartbeat < %d, using %d\n", 
++				WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
++				WD_TIMO);
++	}
++
++	ret = register_reboot_notifier(&wdog_notifier);
++	if (ret) {
++		printk(KERN_ERR
++		      "wdt: cannot register reboot notifier (err=%d)\n", ret);
++		goto out_reboot;
++	}
++
++	ret = misc_register(&wdog_miscdev);
++	if (ret) {
++		printk(KERN_ERR
++			"wdt: cannot register miscdev on minor=%d (err=%d)\n",
++							WATCHDOG_MINOR, ret);
++		goto out_misc;
++	}
++
++	printk(KERN_INFO "bcm2708 watchdog, heartbeat=%d sec (nowayout=%d)\n",
++		heartbeat, nowayout);
++	return 0;
++
++out_misc:
++	unregister_reboot_notifier(&wdog_notifier);
++out_reboot:
++	return ret;
++}
++
++module_init(wdog_init);
++module_exit(wdog_exit);
++
++MODULE_AUTHOR("Luke Diamand");
++MODULE_DESCRIPTION("Driver for BCM2708 watchdog");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
++MODULE_ALIAS_MISCDEV(TEMP_MINOR);
++MODULE_LICENSE("GPL");
++
+diff -urN linux-3.10/drivers/watchdog/Kconfig linux-rpi-3.10.y/drivers/watchdog/Kconfig
+--- linux-3.10/drivers/watchdog/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/watchdog/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -391,6 +391,12 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called retu_wdt.
+ 
++config BCM2708_WDT
++	tristate "BCM2708 Watchdog"
++	depends on ARCH_BCM2708
++	help
++	  Enables BCM2708 watchdog support.
++
+ # AVR32 Architecture
+ 
+ config AT32AP700X_WDT
+diff -urN linux-3.10/drivers/watchdog/Makefile linux-rpi-3.10.y/drivers/watchdog/Makefile
+--- linux-3.10/drivers/watchdog/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/watchdog/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -54,6 +54,7 @@
+ obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
+ obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
+ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
++obj-$(CONFIG_BCM2708_WDT) += bcm2708_wdog.o
+ 
+ # AVR32 Architecture
+ obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/target/linux/brcm2708/patches-3.10/004-bcm2708-framebuffer-driver.patch b/target/linux/brcm2708/patches-3.10/004-bcm2708-framebuffer-driver.patch
new file mode 100644
index 0000000000..7bdf92c35a
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/004-bcm2708-framebuffer-driver.patch
@@ -0,0 +1,3427 @@
+diff -urN linux-3.10/drivers/video/bcm2708_fb.c linux-rpi-3.10.y/drivers/video/bcm2708_fb.c
+--- linux-3.10/drivers/video/bcm2708_fb.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/video/bcm2708_fb.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,647 @@
++/*
++ *  linux/drivers/video/bcm2708_fb.c
++ *
++ * Copyright (C) 2010 Broadcom
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Broadcom simple framebuffer driver
++ *
++ * This file is derived from cirrusfb.c
++ * Copyright 1999-2001 Jeff Garzik <jgarzik@pobox.com>
++ *
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/slab.h>
++#include <linux/mm.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/list.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/printk.h>
++#include <linux/console.h>
++
++#include <mach/dma.h>
++#include <mach/platform.h>
++#include <mach/vcio.h>
++
++#include <asm/sizes.h>
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++
++#ifdef BCM2708_FB_DEBUG
++#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
++#else
++#define print_debug(fmt,...)
++#endif
++
++/* This is limited to 16 characters when displayed by X startup */
++static const char *bcm2708_name = "BCM2708 FB";
++
++#define DRIVER_NAME "bcm2708_fb"
++
++/* this data structure describes each frame buffer device we find */
++
++struct fbinfo_s {
++	u32 xres, yres, xres_virtual, yres_virtual;
++	u32 pitch, bpp;
++	u32 xoffset, yoffset;
++	u32 base;
++	u32 screen_size;
++	u16 cmap[256];
++};
++
++struct bcm2708_fb {
++	struct fb_info fb;
++	struct platform_device *dev;
++	struct fbinfo_s *info;
++	dma_addr_t dma;
++	u32 cmap[16];
++	int dma_chan;
++	int dma_irq;
++	void __iomem *dma_chan_base;
++	void *cb_base;		/* DMA control blocks */
++	dma_addr_t cb_handle;
++};
++
++#define to_bcm2708(info)	container_of(info, struct bcm2708_fb, fb)
++
++static int bcm2708_fb_set_bitfields(struct fb_var_screeninfo *var)
++{
++	int ret = 0;
++
++	memset(&var->transp, 0, sizeof(var->transp));
++
++	var->red.msb_right = 0;
++	var->green.msb_right = 0;
++	var->blue.msb_right = 0;
++
++	switch (var->bits_per_pixel) {
++	case 1:
++	case 2:
++	case 4:
++	case 8:
++		var->red.length = var->bits_per_pixel;
++		var->red.offset = 0;
++		var->green.length = var->bits_per_pixel;
++		var->green.offset = 0;
++		var->blue.length = var->bits_per_pixel;
++		var->blue.offset = 0;
++		break;
++	case 16:
++		var->red.length = 5;
++		var->blue.length = 5;
++		/*
++		 * Green length can be 5 or 6 depending whether
++		 * we're operating in RGB555 or RGB565 mode.
++		 */
++		if (var->green.length != 5 && var->green.length != 6)
++			var->green.length = 6;
++		break;
++	case 24:
++		var->red.length = 8;
++		var->blue.length = 8;
++		var->green.length = 8;
++		break;
++	case 32:
++		var->red.length = 8;
++		var->green.length = 8;
++		var->blue.length = 8;
++		var->transp.length = 8;
++		break;
++	default:
++		ret = -EINVAL;
++		break;
++	}
++
++	/*
++	 * >= 16bpp displays have separate colour component bitfields
++	 * encoded in the pixel data.  Calculate their position from
++	 * the bitfield length defined above.
++	 */
++	if (ret == 0 && var->bits_per_pixel >= 24) {
++		var->red.offset = 0;
++		var->green.offset = var->red.offset + var->red.length;
++		var->blue.offset = var->green.offset + var->green.length;
++		var->transp.offset = var->blue.offset + var->blue.length;
++	} else if (ret == 0 && var->bits_per_pixel >= 16) {
++		var->blue.offset = 0;
++		var->green.offset = var->blue.offset + var->blue.length;
++		var->red.offset = var->green.offset + var->green.length;
++		var->transp.offset = var->red.offset + var->red.length;
++	}
++
++	return ret;
++}
++
++static int bcm2708_fb_check_var(struct fb_var_screeninfo *var,
++				struct fb_info *info)
++{
++	/* info input, var output */
++	int yres;
++
++	/* info input, var output */
++	print_debug("bcm2708_fb_check_var info(%p) %dx%d (%dx%d), %d, %d\n", info,
++		info->var.xres, info->var.yres, info->var.xres_virtual,
++		info->var.yres_virtual, (int)info->screen_size,
++		info->var.bits_per_pixel);
++	print_debug("bcm2708_fb_check_var var(%p) %dx%d (%dx%d), %d\n", var,
++		var->xres, var->yres, var->xres_virtual, var->yres_virtual,
++		var->bits_per_pixel);
++
++	if (!var->bits_per_pixel)
++		var->bits_per_pixel = 16;
++
++	if (bcm2708_fb_set_bitfields(var) != 0) {
++		pr_err("bcm2708_fb_check_var: invalid bits_per_pixel %d\n",
++		     var->bits_per_pixel);
++		return -EINVAL;
++	}
++
++
++	if (var->xres_virtual < var->xres)
++		var->xres_virtual = var->xres;
++	/* use highest possible virtual resolution */
++	if (var->yres_virtual == -1) {
++		var->yres_virtual = 480;
++
++		pr_err
++		    ("bcm2708_fb_check_var: virtual resolution set to maximum of %dx%d\n",
++		     var->xres_virtual, var->yres_virtual);
++	}
++	if (var->yres_virtual < var->yres)
++		var->yres_virtual = var->yres;
++
++	if (var->xoffset < 0)
++		var->xoffset = 0;
++	if (var->yoffset < 0)
++		var->yoffset = 0;
++
++	/* truncate xoffset and yoffset to maximum if too high */
++	if (var->xoffset > var->xres_virtual - var->xres)
++		var->xoffset = var->xres_virtual - var->xres - 1;
++	if (var->yoffset > var->yres_virtual - var->yres)
++		var->yoffset = var->yres_virtual - var->yres - 1;
++
++	yres = var->yres;
++	if (var->vmode & FB_VMODE_DOUBLE)
++		yres *= 2;
++	else if (var->vmode & FB_VMODE_INTERLACED)
++		yres = (yres + 1) / 2;
++
++	if (yres > 1200) {
++		pr_err("bcm2708_fb_check_var: ERROR: VerticalTotal >= 1200; "
++		       "special treatment required! (TODO)\n");
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int bcm2708_fb_set_par(struct fb_info *info)
++{
++	uint32_t val = 0;
++	struct bcm2708_fb *fb = to_bcm2708(info);
++	volatile struct fbinfo_s *fbinfo = fb->info;
++	fbinfo->xres = info->var.xres;
++	fbinfo->yres = info->var.yres;
++	fbinfo->xres_virtual = info->var.xres_virtual;
++	fbinfo->yres_virtual = info->var.yres_virtual;
++	fbinfo->bpp = info->var.bits_per_pixel;
++	fbinfo->xoffset = info->var.xoffset;
++	fbinfo->yoffset = info->var.yoffset;
++	fbinfo->base = 0;	/* filled in by VC */
++	fbinfo->pitch = 0;	/* filled in by VC */
++
++	print_debug("bcm2708_fb_set_par info(%p) %dx%d (%dx%d), %d, %d\n", info,
++		info->var.xres, info->var.yres, info->var.xres_virtual,
++		info->var.yres_virtual, (int)info->screen_size,
++		info->var.bits_per_pixel);
++
++	/* ensure last write to fbinfo is visible to GPU */
++	wmb();
++
++	/* inform vc about new framebuffer */
++	bcm_mailbox_write(MBOX_CHAN_FB, fb->dma);
++
++	/* TODO: replace fb driver with vchiq version */
++	/* wait for response */
++	bcm_mailbox_read(MBOX_CHAN_FB, &val);
++
++	/* ensure GPU writes are visible to us */
++	rmb();
++
++        if (val == 0) {
++		fb->fb.fix.line_length = fbinfo->pitch;
++
++		if (info->var.bits_per_pixel <= 8)
++			fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
++		else
++			fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
++
++		fb->fb.fix.smem_start = fbinfo->base;
++		fb->fb.fix.smem_len = fbinfo->pitch * fbinfo->yres_virtual;
++		fb->fb.screen_size = fbinfo->screen_size;
++		if (fb->fb.screen_base)
++			iounmap(fb->fb.screen_base);
++		fb->fb.screen_base =
++			(void *)ioremap_wc(fb->fb.fix.smem_start, fb->fb.screen_size);
++		if (!fb->fb.screen_base) {
++			/* the console may currently be locked */
++			console_trylock();
++			console_unlock();
++
++			BUG();		/* what can we do here */
++		}
++	}
++	print_debug
++	    ("BCM2708FB: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d success=%d\n",
++	     (void *)fb->fb.screen_base, (void *)fb->fb.fix.smem_start,
++	     fbinfo->xres, fbinfo->yres, fbinfo->bpp,
++	     fbinfo->pitch, (int)fb->fb.screen_size, val);
++
++	return val;
++}
++
++static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
++{
++	unsigned int mask = (1 << bf->length) - 1;
++
++	return (val >> (16 - bf->length) & mask) << bf->offset;
++}
++
++
++static int bcm2708_fb_setcolreg(unsigned int regno, unsigned int red,
++				unsigned int green, unsigned int blue,
++				unsigned int transp, struct fb_info *info)
++{
++	struct bcm2708_fb *fb = to_bcm2708(info);
++
++	/*print_debug("BCM2708FB: setcolreg %d:(%02x,%02x,%02x,%02x) %x\n", regno, red, green, blue, transp, fb->fb.fix.visual);*/
++	if (fb->fb.var.bits_per_pixel <= 8) {
++		if (regno < 256) {
++			/* blue [0:4], green [5:10], red [11:15] */
++			fb->info->cmap[regno] = ((red   >> (16-5)) & 0x1f) << 11 |
++						((green >> (16-6)) & 0x3f) << 5 |
++						((blue  >> (16-5)) & 0x1f) << 0;
++		}
++		/* Hack: we need to tell GPU the palette has changed, but currently bcm2708_fb_set_par takes noticable time when called for every (256) colour */
++		/* So just call it for what looks like the last colour in a list for now. */
++		if (regno == 15 || regno == 255)
++			bcm2708_fb_set_par(info);
++        } else if (regno < 16) {
++		fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
++		    convert_bitfield(blue, &fb->fb.var.blue) |
++		    convert_bitfield(green, &fb->fb.var.green) |
++		    convert_bitfield(red, &fb->fb.var.red);
++	}
++	return regno > 255;
++}
++
++static int bcm2708_fb_blank(int blank_mode, struct fb_info *info)
++{
++	/*print_debug("bcm2708_fb_blank\n"); */
++	return -1;
++}
++
++static void bcm2708_fb_fillrect(struct fb_info *info,
++				const struct fb_fillrect *rect)
++{
++	/* (is called) print_debug("bcm2708_fb_fillrect\n"); */
++	cfb_fillrect(info, rect);
++}
++
++/* A helper function for configuring dma control block */
++static void set_dma_cb(struct bcm2708_dma_cb *cb,
++		       int        burst_size,
++		       dma_addr_t dst,
++		       int        dst_stride,
++		       dma_addr_t src,
++		       int        src_stride,
++		       int        w,
++		       int        h)
++{
++	cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH |
++		   BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH |
++		   BCM2708_DMA_D_INC | BCM2708_DMA_TDMODE;
++	cb->dst = dst;
++	cb->src = src;
++	/*
++	 * This is not really obvious from the DMA documentation,
++	 * but the top 16 bits must be programmmed to "height -1"
++	 * and not "height" in 2D mode.
++	 */
++	cb->length = ((h - 1) << 16) | w;
++	cb->stride = ((dst_stride - w) << 16) | (u16)(src_stride - w);
++	cb->pad[0] = 0;
++	cb->pad[1] = 0;
++}
++
++static void bcm2708_fb_copyarea(struct fb_info *info,
++				const struct fb_copyarea *region)
++{
++	struct bcm2708_fb *fb = to_bcm2708(info);
++	struct bcm2708_dma_cb *cb = fb->cb_base;
++	int bytes_per_pixel = (info->var.bits_per_pixel + 7) >> 3;
++	/* Channel 0 supports larger bursts and is a bit faster */
++	int burst_size = (fb->dma_chan == 0) ? 8 : 2;
++
++	/* Fallback to cfb_copyarea() if we don't like something */
++	if (bytes_per_pixel > 4 ||
++	    info->var.xres > 1920 || info->var.yres > 1200 ||
++	    region->width <= 0 || region->width > info->var.xres ||
++	    region->height <= 0 || region->height > info->var.yres ||
++	    region->sx < 0 || region->sx >= info->var.xres ||
++	    region->sy < 0 || region->sy >= info->var.yres ||
++	    region->dx < 0 || region->dx >= info->var.xres ||
++	    region->dy < 0 || region->dy >= info->var.yres ||
++	    region->sx + region->width > info->var.xres ||
++	    region->dx + region->width > info->var.xres ||
++	    region->sy + region->height > info->var.yres ||
++	    region->dy + region->height > info->var.yres) {
++		cfb_copyarea(info, region);
++		return;
++	}
++
++	if (region->dy == region->sy && region->dx > region->sx) {
++		/*
++		 * A difficult case of overlapped copy. Because DMA can't
++		 * copy individual scanlines in backwards direction, we need
++		 * two-pass processing. We do it by programming a chain of dma
++		 * control blocks in the first 16K part of the buffer and use
++		 * the remaining 48K as the intermediate temporary scratch
++		 * buffer. The buffer size is sufficient to handle up to
++		 * 1920x1200 resolution at 32bpp pixel depth.
++		 */
++		int y;
++		dma_addr_t control_block_pa = fb->cb_handle;
++		dma_addr_t scratchbuf = fb->cb_handle + 16 * 1024;
++		int scanline_size = bytes_per_pixel * region->width;
++		int scanlines_per_cb = (64 * 1024 - 16 * 1024) / scanline_size;
++
++		for (y = 0; y < region->height; y += scanlines_per_cb) {
++			dma_addr_t src =
++				fb->fb.fix.smem_start +
++				bytes_per_pixel * region->sx +
++				(region->sy + y) * fb->fb.fix.line_length;
++			dma_addr_t dst =
++				fb->fb.fix.smem_start +
++				bytes_per_pixel * region->dx +
++				(region->dy + y) * fb->fb.fix.line_length;
++
++			if (region->height - y < scanlines_per_cb)
++				scanlines_per_cb = region->height - y;
++
++			set_dma_cb(cb, burst_size, scratchbuf, scanline_size,
++				   src, fb->fb.fix.line_length,
++				   scanline_size, scanlines_per_cb);
++			control_block_pa += sizeof(struct bcm2708_dma_cb);
++			cb->next = control_block_pa;
++			cb++;
++
++			set_dma_cb(cb, burst_size, dst, fb->fb.fix.line_length,
++				   scratchbuf, scanline_size,
++				   scanline_size, scanlines_per_cb);
++			control_block_pa += sizeof(struct bcm2708_dma_cb);
++			cb->next = control_block_pa;
++			cb++;
++		}
++		/* move the pointer back to the last dma control block */
++		cb--;
++	} else {
++		/* A single dma control block is enough. */
++		int sy, dy, stride;
++		if (region->dy <= region->sy) {
++			/* processing from top to bottom */
++			dy = region->dy;
++			sy = region->sy;
++			stride = fb->fb.fix.line_length;
++		} else {
++			/* processing from bottom to top */
++			dy = region->dy + region->height - 1;
++			sy = region->sy + region->height - 1;
++			stride = -fb->fb.fix.line_length;
++		}
++		set_dma_cb(cb, burst_size,
++			   fb->fb.fix.smem_start + dy * fb->fb.fix.line_length +
++						   bytes_per_pixel * region->dx,
++			   stride,
++			   fb->fb.fix.smem_start + sy * fb->fb.fix.line_length +
++						   bytes_per_pixel * region->sx,
++			   stride,
++			   region->width * bytes_per_pixel,
++			   region->height);
++	}
++
++	/* end of dma control blocks chain */
++	cb->next = 0;
++
++	bcm_dma_start(fb->dma_chan_base, fb->cb_handle);
++	bcm_dma_wait_idle(fb->dma_chan_base);
++}
++
++static void bcm2708_fb_imageblit(struct fb_info *info,
++				 const struct fb_image *image)
++{
++	/* (is called) print_debug("bcm2708_fb_imageblit\n"); */
++	cfb_imageblit(info, image);
++}
++
++static struct fb_ops bcm2708_fb_ops = {
++	.owner = THIS_MODULE,
++	.fb_check_var = bcm2708_fb_check_var,
++	.fb_set_par = bcm2708_fb_set_par,
++	.fb_setcolreg = bcm2708_fb_setcolreg,
++	.fb_blank = bcm2708_fb_blank,
++	.fb_fillrect = bcm2708_fb_fillrect,
++	.fb_copyarea = bcm2708_fb_copyarea,
++	.fb_imageblit = bcm2708_fb_imageblit,
++};
++
++static int fbwidth = 800;	/* module parameter */
++static int fbheight = 480;	/* module parameter */
++static int fbdepth = 16;	/* module parameter */
++
++static int bcm2708_fb_register(struct bcm2708_fb *fb)
++{
++	int ret;
++	dma_addr_t dma;
++	void *mem;
++
++	mem =
++	    dma_alloc_coherent(NULL, PAGE_ALIGN(sizeof(*fb->info)), &dma,
++			       GFP_KERNEL);
++
++	if (NULL == mem) {
++		pr_err(": unable to allocate fbinfo buffer\n");
++		ret = -ENOMEM;
++	} else {
++		fb->info = (struct fbinfo_s *)mem;
++		fb->dma = dma;
++	}
++	fb->fb.fbops = &bcm2708_fb_ops;
++	fb->fb.flags = FBINFO_FLAG_DEFAULT | FBINFO_HWACCEL_COPYAREA;
++	fb->fb.pseudo_palette = fb->cmap;
++
++	strncpy(fb->fb.fix.id, bcm2708_name, sizeof(fb->fb.fix.id));
++	fb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
++	fb->fb.fix.type_aux = 0;
++	fb->fb.fix.xpanstep = 0;
++	fb->fb.fix.ypanstep = 0;
++	fb->fb.fix.ywrapstep = 0;
++	fb->fb.fix.accel = FB_ACCEL_NONE;
++
++	fb->fb.var.xres = fbwidth;
++	fb->fb.var.yres = fbheight;
++	fb->fb.var.xres_virtual = fbwidth;
++	fb->fb.var.yres_virtual = fbheight;
++	fb->fb.var.bits_per_pixel = fbdepth;
++	fb->fb.var.vmode = FB_VMODE_NONINTERLACED;
++	fb->fb.var.activate = FB_ACTIVATE_NOW;
++	fb->fb.var.nonstd = 0;
++	fb->fb.var.height = -1;		/* height of picture in mm    */
++	fb->fb.var.width = -1;		/* width of picture in mm    */
++	fb->fb.var.accel_flags = 0;
++
++	fb->fb.monspecs.hfmin = 0;
++	fb->fb.monspecs.hfmax = 100000;
++	fb->fb.monspecs.vfmin = 0;
++	fb->fb.monspecs.vfmax = 400;
++	fb->fb.monspecs.dclkmin = 1000000;
++	fb->fb.monspecs.dclkmax = 100000000;
++
++	bcm2708_fb_set_bitfields(&fb->fb.var);
++
++	/*
++	 * Allocate colourmap.
++	 */
++
++	fb_set_var(&fb->fb, &fb->fb.var);
++
++	print_debug("BCM2708FB: registering framebuffer (%dx%d@%d)\n", fbwidth,
++		fbheight, fbdepth);
++
++	ret = register_framebuffer(&fb->fb);
++	print_debug("BCM2708FB: register framebuffer (%d)\n", ret);
++	if (ret == 0)
++		goto out;
++
++	print_debug("BCM2708FB: cannot register framebuffer (%d)\n", ret);
++out:
++	return ret;
++}
++
++static int bcm2708_fb_probe(struct platform_device *dev)
++{
++	struct bcm2708_fb *fb;
++	int ret;
++
++	fb = kmalloc(sizeof(struct bcm2708_fb), GFP_KERNEL);
++	if (!fb) {
++		dev_err(&dev->dev,
++			"could not allocate new bcm2708_fb struct\n");
++		ret = -ENOMEM;
++		goto free_region;
++	}
++	memset(fb, 0, sizeof(struct bcm2708_fb));
++
++	fb->cb_base = dma_alloc_writecombine(&dev->dev, SZ_64K,
++					     &fb->cb_handle, GFP_KERNEL);
++	if (!fb->cb_base) {
++		dev_err(&dev->dev, "cannot allocate DMA CBs\n");
++		ret = -ENOMEM;
++		goto free_fb;
++	}
++
++	pr_info("BCM2708FB: allocated DMA memory %08x\n",
++	       fb->cb_handle);
++
++	ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_BULK,
++				 &fb->dma_chan_base, &fb->dma_irq);
++	if (ret < 0) {
++		dev_err(&dev->dev, "couldn't allocate a DMA channel\n");
++		goto free_cb;
++	}
++	fb->dma_chan = ret;
++
++	pr_info("BCM2708FB: allocated DMA channel %d @ %p\n",
++	       fb->dma_chan, fb->dma_chan_base);
++
++	fb->dev = dev;
++
++	ret = bcm2708_fb_register(fb);
++	if (ret == 0) {
++		platform_set_drvdata(dev, fb);
++		goto out;
++	}
++
++free_cb:
++	dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle);
++free_fb:
++	kfree(fb);
++free_region:
++	dev_err(&dev->dev, "probe failed, err %d\n", ret);
++out:
++	return ret;
++}
++
++static int bcm2708_fb_remove(struct platform_device *dev)
++{
++	struct bcm2708_fb *fb = platform_get_drvdata(dev);
++
++	platform_set_drvdata(dev, NULL);
++
++	if (fb->fb.screen_base)
++		iounmap(fb->fb.screen_base);
++	unregister_framebuffer(&fb->fb);
++
++	dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle);
++	bcm_dma_chan_free(fb->dma_chan);
++
++	dma_free_coherent(NULL, PAGE_ALIGN(sizeof(*fb->info)), (void *)fb->info,
++			  fb->dma);
++	kfree(fb);
++
++	return 0;
++}
++
++static struct platform_driver bcm2708_fb_driver = {
++	.probe = bcm2708_fb_probe,
++	.remove = bcm2708_fb_remove,
++	.driver = {
++		   .name = DRIVER_NAME,
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static int __init bcm2708_fb_init(void)
++{
++	return platform_driver_register(&bcm2708_fb_driver);
++}
++
++module_init(bcm2708_fb_init);
++
++static void __exit bcm2708_fb_exit(void)
++{
++	platform_driver_unregister(&bcm2708_fb_driver);
++}
++
++module_exit(bcm2708_fb_exit);
++
++module_param(fbwidth, int, 0644);
++module_param(fbheight, int, 0644);
++module_param(fbdepth, int, 0644);
++
++MODULE_DESCRIPTION("BCM2708 framebuffer driver");
++MODULE_LICENSE("GPL");
++
++MODULE_PARM_DESC(fbwidth, "Width of ARM Framebuffer");
++MODULE_PARM_DESC(fbheight, "Height of ARM Framebuffer");
++MODULE_PARM_DESC(fbdepth, "Bit depth of ARM Framebuffer");
+diff -urN linux-3.10/drivers/video/cfbimgblt.c linux-rpi-3.10.y/drivers/video/cfbimgblt.c
+--- linux-3.10/drivers/video/cfbimgblt.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/video/cfbimgblt.c	2013-07-06 15:25:50.000000000 +0100
+@@ -28,6 +28,11 @@
+  *
+  *  Also need to add code to deal with cards endians that are different than
+  *  the native cpu endians. I also need to deal with MSB position in the word.
++ *  Modified by Harm Hanemaaijer (fgenfb@yahoo.com) 2013:
++ *  - Provide optimized versions of fast_imageblit for 16 and 32bpp that are
++ *    significantly faster than the previous implementation.
++ *  - Simplify the fast/slow_imageblit selection code, avoiding integer
++ *    divides.
+  */
+ #include <linux/module.h>
+ #include <linux/string.h>
+@@ -262,6 +267,133 @@
+ 	}
+ }	
+ 	
++/*
++ * Optimized fast_imageblit for bpp == 16. ppw = 2, bit_mask = 3 folded
++ * into the code, main loop unrolled.
++ */
++
++static inline void fast_imageblit16(const struct fb_image *image,
++				    struct fb_info *p, u8 __iomem * dst1,
++				    u32 fgcolor, u32 bgcolor)
++{
++	u32 fgx = fgcolor, bgx = bgcolor;
++	u32 spitch = (image->width + 7) / 8;
++	u32 end_mask, eorx;
++	const char *s = image->data, *src;
++	u32 __iomem *dst;
++	const u32 *tab = NULL;
++	int i, j, k;
++
++	tab = fb_be_math(p) ? cfb_tab16_be : cfb_tab16_le;
++
++	fgx <<= 16;
++	bgx <<= 16;
++	fgx |= fgcolor;
++	bgx |= bgcolor;
++
++	eorx = fgx ^ bgx;
++	k = image->width / 2;
++
++	for (i = image->height; i--;) {
++		dst = (u32 __iomem *) dst1;
++		src = s;
++
++		j = k;
++		while (j >= 4) {
++			u8 bits = *src;
++			end_mask = tab[(bits >> 6) & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 4) & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 2) & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[bits & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			src++;
++			j -= 4;
++		}
++		if (j != 0) {
++			u8 bits = *src;
++			end_mask = tab[(bits >> 6) & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			if (j >= 2) {
++				end_mask = tab[(bits >> 4) & 3];
++				FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++				if (j == 3) {
++					end_mask = tab[(bits >> 2) & 3];
++					FB_WRITEL((end_mask & eorx) ^ bgx, dst);
++				}
++			}
++		}
++		dst1 += p->fix.line_length;
++		s += spitch;
++	}
++}
++
++/*
++ * Optimized fast_imageblit for bpp == 32. ppw = 1, bit_mask = 1 folded
++ * into the code, main loop unrolled.
++ */
++
++static inline void fast_imageblit32(const struct fb_image *image,
++				    struct fb_info *p, u8 __iomem * dst1,
++				    u32 fgcolor, u32 bgcolor)
++{
++	u32 fgx = fgcolor, bgx = bgcolor;
++	u32 spitch = (image->width + 7) / 8;
++	u32 end_mask, eorx;
++	const char *s = image->data, *src;
++	u32 __iomem *dst;
++	const u32 *tab = NULL;
++	int i, j, k;
++
++	tab = cfb_tab32;
++
++	eorx = fgx ^ bgx;
++	k = image->width;
++
++	for (i = image->height; i--;) {
++		dst = (u32 __iomem *) dst1;
++		src = s;
++
++		j = k;
++		while (j >= 8) {
++			u8 bits = *src;
++			end_mask = tab[(bits >> 7) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 6) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 5) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 4) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 3) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 2) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 1) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[bits & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			src++;
++			j -= 8;
++		}
++		if (j != 0) {
++			u32 bits = (u32) * src;
++			while (j > 1) {
++				end_mask = tab[(bits >> 7) & 1];
++				FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++				bits <<= 1;
++				j--;
++			}
++			end_mask = tab[(bits >> 7) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst);
++		}
++		dst1 += p->fix.line_length;
++		s += spitch;
++	}
++}
++
+ void cfb_imageblit(struct fb_info *p, const struct fb_image *image)
+ {
+ 	u32 fgcolor, bgcolor, start_index, bitstart, pitch_index = 0;
+@@ -294,11 +426,21 @@
+ 			bgcolor = image->bg_color;
+ 		}	
+ 		
+-		if (32 % bpp == 0 && !start_index && !pitch_index && 
+-		    ((width & (32/bpp-1)) == 0) &&
+-		    bpp >= 8 && bpp <= 32) 			
+-			fast_imageblit(image, p, dst1, fgcolor, bgcolor);
+-		else 
++		if (!start_index && !pitch_index) {
++			if (bpp == 32)
++				fast_imageblit32(image, p, dst1, fgcolor,
++						 bgcolor);
++			else if (bpp == 16 && (width & 1) == 0)
++				fast_imageblit16(image, p, dst1, fgcolor,
++						 bgcolor);
++			else if (bpp == 8 && (width & 3) == 0)
++				fast_imageblit(image, p, dst1, fgcolor,
++					       bgcolor);
++			else
++				slow_imageblit(image, p, dst1, fgcolor,
++					       bgcolor,
++					       start_index, pitch_index);
++		} else
+ 			slow_imageblit(image, p, dst1, fgcolor, bgcolor,
+ 					start_index, pitch_index);
+ 	} else
+diff -urN linux-3.10/drivers/video/fbmem.c linux-rpi-3.10.y/drivers/video/fbmem.c
+--- linux-3.10/drivers/video/fbmem.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/video/fbmem.c	2013-07-06 15:25:50.000000000 +0100
+@@ -1074,6 +1074,25 @@
+  	return ret;
+ }
+ 
++static int fb_copyarea_user(struct fb_info *info,
++			    struct fb_copyarea *copy)
++{
++	int ret = 0;
++	if (!lock_fb_info(info))
++		return -ENODEV;
++	if (copy->dx + copy->width > info->var.xres ||
++	    copy->sx + copy->width > info->var.xres ||
++	    copy->dy + copy->height > info->var.yres ||
++	    copy->sy + copy->height > info->var.yres) {
++		ret = -EINVAL;
++		goto out;
++	}
++	info->fbops->fb_copyarea(info, copy);
++out:
++	unlock_fb_info(info);
++	return ret;
++}
++
+ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
+ 			unsigned long arg)
+ {
+@@ -1084,6 +1103,7 @@
+ 	struct fb_cmap cmap_from;
+ 	struct fb_cmap_user cmap;
+ 	struct fb_event event;
++	struct fb_copyarea copy;
+ 	void __user *argp = (void __user *)arg;
+ 	long ret = 0;
+ 
+@@ -1193,6 +1213,15 @@
+ 		console_unlock();
+ 		unlock_fb_info(info);
+ 		break;
++	case FBIOCOPYAREA:
++		if (info->flags & FBINFO_HWACCEL_COPYAREA) {
++			/* only provide this ioctl if it is accelerated */
++			if (copy_from_user(&copy, argp, sizeof(copy)))
++				return -EFAULT;
++			ret = fb_copyarea_user(info, &copy);
++			break;
++		}
++		/* fall through */
+ 	default:
+ 		if (!lock_fb_info(info))
+ 			return -ENODEV;
+@@ -1345,6 +1374,7 @@
+ 	case FBIOPAN_DISPLAY:
+ 	case FBIOGET_CON2FBMAP:
+ 	case FBIOPUT_CON2FBMAP:
++	case FBIOCOPYAREA:
+ 		arg = (unsigned long) compat_ptr(arg);
+ 	case FBIOBLANK:
+ 		ret = do_fb_ioctl(info, cmd, arg);
+diff -urN linux-3.10/drivers/video/Kconfig linux-rpi-3.10.y/drivers/video/Kconfig
+--- linux-3.10/drivers/video/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/video/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -310,6 +310,20 @@
+ 	help
+ 	  Support the Permedia2 FIFO disconnect feature.
+ 
++config FB_BCM2708
++	tristate "BCM2708 framebuffer support"
++	depends on FB && ARM
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This framebuffer device driver is for the BCM2708 framebuffer.
++
++	  If you want to compile this as a module (=code which can be
++	  inserted into and removed from the running kernel), say M
++	  here and read <file:Documentation/kbuild/modules.txt>.  The module
++	  will be called bcm2708_fb.
++
+ config FB_ARMCLCD
+ 	tristate "ARM PrimeCell PL110 support"
+ 	depends on FB && ARM && ARM_AMBA
+diff -urN linux-3.10/drivers/video/logo/logo_linux_clut224.ppm linux-rpi-3.10.y/drivers/video/logo/logo_linux_clut224.ppm
+--- linux-3.10/drivers/video/logo/logo_linux_clut224.ppm	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/video/logo/logo_linux_clut224.ppm	2013-07-06 15:25:50.000000000 +0100
+@@ -1,1604 +1,883 @@
+ P3
+-# Standard 224-color Linux logo
+-80 80
++63 80
+ 255
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6   6   6   6  10  10  10  10  10  10
+- 10  10  10   6   6   6   6   6   6   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  10  10  10  14  14  14
+- 22  22  22  26  26  26  30  30  30  34  34  34
+- 30  30  30  30  30  30  26  26  26  18  18  18
+- 14  14  14  10  10  10   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  14  14  14  26  26  26  42  42  42
+- 54  54  54  66  66  66  78  78  78  78  78  78
+- 78  78  78  74  74  74  66  66  66  54  54  54
+- 42  42  42  26  26  26  18  18  18  10  10  10
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 22  22  22  42  42  42  66  66  66  86  86  86
+- 66  66  66  38  38  38  38  38  38  22  22  22
+- 26  26  26  34  34  34  54  54  54  66  66  66
+- 86  86  86  70  70  70  46  46  46  26  26  26
+- 14  14  14   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0  10  10  10  26  26  26
+- 50  50  50  82  82  82  58  58  58   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  6   6   6  54  54  54  86  86  86  66  66  66
+- 38  38  38  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  22  22  22  50  50  50
+- 78  78  78  34  34  34   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   6   6   6  70  70  70
+- 78  78  78  46  46  46  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  18  18  18  42  42  42  82  82  82
+- 26  26  26   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  14  14  14
+- 46  46  46  34  34  34   6   6   6   2   2   6
+- 42  42  42  78  78  78  42  42  42  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   0   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 10  10  10  30  30  30  66  66  66  58  58  58
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  26  26  26
+- 86  86  86 101 101 101  46  46  46  10  10  10
+-  2   2   6  58  58  58  70  70  70  34  34  34
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 14  14  14  42  42  42  86  86  86  10  10  10
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  30  30  30
+- 94  94  94  94  94  94  58  58  58  26  26  26
+-  2   2   6   6   6   6  78  78  78  54  54  54
+- 22  22  22   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 22  22  22  62  62  62  62  62  62   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  26  26  26
+- 54  54  54  38  38  38  18  18  18  10  10  10
+-  2   2   6   2   2   6  34  34  34  82  82  82
+- 38  38  38  14  14  14   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 30  30  30  78  78  78  30  30  30   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  10  10  10
+- 10  10  10   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  78  78  78
+- 50  50  50  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  86  86  86  14  14  14   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  54  54  54
+- 66  66  66  26  26  26   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 42  42  42  82  82  82   2   2   6   2   2   6
+-  2   2   6   6   6   6  10  10  10   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   6   6   6
+- 14  14  14  10  10  10   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  18  18  18
+- 82  82  82  34  34  34  10  10  10   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  86  86  86   2   2   6   2   2   6
+-  6   6   6   6   6   6  22  22  22  34  34  34
+-  6   6   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  18  18  18  34  34  34
+- 10  10  10  50  50  50  22  22  22   2   2   6
+-  2   2   6   2   2   6   2   2   6  10  10  10
+- 86  86  86  42  42  42  14  14  14   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  86  86  86   2   2   6   2   2   6
+- 38  38  38 116 116 116  94  94  94  22  22  22
+- 22  22  22   2   2   6   2   2   6   2   2   6
+- 14  14  14  86  86  86 138 138 138 162 162 162
+-154 154 154  38  38  38  26  26  26   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 86  86  86  46  46  46  14  14  14   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  86  86  86   2   2   6  14  14  14
+-134 134 134 198 198 198 195 195 195 116 116 116
+- 10  10  10   2   2   6   2   2   6   6   6   6
+-101  98  89 187 187 187 210 210 210 218 218 218
+-214 214 214 134 134 134  14  14  14   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 86  86  86  50  50  50  18  18  18   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   1   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  86  86  86   2   2   6  54  54  54
+-218 218 218 195 195 195 226 226 226 246 246 246
+- 58  58  58   2   2   6   2   2   6  30  30  30
+-210 210 210 253 253 253 174 174 174 123 123 123
+-221 221 221 234 234 234  74  74  74   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 70  70  70  58  58  58  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  82  82  82   2   2   6 106 106 106
+-170 170 170  26  26  26  86  86  86 226 226 226
+-123 123 123  10  10  10  14  14  14  46  46  46
+-231 231 231 190 190 190   6   6   6  70  70  70
+- 90  90  90 238 238 238 158 158 158   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 70  70  70  58  58  58  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   1   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 42  42  42  86  86  86   6   6   6 116 116 116
+-106 106 106   6   6   6  70  70  70 149 149 149
+-128 128 128  18  18  18  38  38  38  54  54  54
+-221 221 221 106 106 106   2   2   6  14  14  14
+- 46  46  46 190 190 190 198 198 198   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 74  74  74  62  62  62  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   1   0   0   0
+-  0   0   1   0   0   0   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 42  42  42  94  94  94  14  14  14 101 101 101
+-128 128 128   2   2   6  18  18  18 116 116 116
+-118  98  46 121  92   8 121  92   8  98  78  10
+-162 162 162 106 106 106   2   2   6   2   2   6
+-  2   2   6 195 195 195 195 195 195   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 74  74  74  62  62  62  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   1   0   0   1
+-  0   0   1   0   0   0   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  90  90  90  14  14  14  58  58  58
+-210 210 210  26  26  26  54  38   6 154 114  10
+-226 170  11 236 186  11 225 175  15 184 144  12
+-215 174  15 175 146  61  37  26   9   2   2   6
+- 70  70  70 246 246 246 138 138 138   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 70  70  70  66  66  66  26  26  26   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  86  86  86  14  14  14  10  10  10
+-195 195 195 188 164 115 192 133   9 225 175  15
+-239 182  13 234 190  10 232 195  16 232 200  30
+-245 207  45 241 208  19 232 195  16 184 144  12
+-218 194 134 211 206 186  42  42  42   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 50  50  50  74  74  74  30  30  30   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 34  34  34  86  86  86  14  14  14   2   2   6
+-121  87  25 192 133   9 219 162  10 239 182  13
+-236 186  11 232 195  16 241 208  19 244 214  54
+-246 218  60 246 218  38 246 215  20 241 208  19
+-241 208  19 226 184  13 121  87  25   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 50  50  50  82  82  82  34  34  34  10  10  10
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 34  34  34  82  82  82  30  30  30  61  42   6
+-180 123   7 206 145  10 230 174  11 239 182  13
+-234 190  10 238 202  15 241 208  19 246 218  74
+-246 218  38 246 215  20 246 215  20 246 215  20
+-226 184  13 215 174  15 184 144  12   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 26  26  26  94  94  94  42  42  42  14  14  14
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  78  78  78  50  50  50 104  69   6
+-192 133   9 216 158  10 236 178  12 236 186  11
+-232 195  16 241 208  19 244 214  54 245 215  43
+-246 215  20 246 215  20 241 208  19 198 155  10
+-200 144  11 216 158  10 156 118  10   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  6   6   6  90  90  90  54  54  54  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  78  78  78  46  46  46  22  22  22
+-137  92   6 210 162  10 239 182  13 238 190  10
+-238 202  15 241 208  19 246 215  20 246 215  20
+-241 208  19 203 166  17 185 133  11 210 150  10
+-216 158  10 210 150  10 102  78  10   2   2   6
+-  6   6   6  54  54  54  14  14  14   2   2   6
+-  2   2   6  62  62  62  74  74  74  30  30  30
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 34  34  34  78  78  78  50  50  50   6   6   6
+- 94  70  30 139 102  15 190 146  13 226 184  13
+-232 200  30 232 195  16 215 174  15 190 146  13
+-168 122  10 192 133   9 210 150  10 213 154  11
+-202 150  34 182 157 106 101  98  89   2   2   6
+-  2   2   6  78  78  78 116 116 116  58  58  58
+-  2   2   6  22  22  22  90  90  90  46  46  46
+- 18  18  18   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  86  86  86  50  50  50   6   6   6
+-128 128 128 174 154 114 156 107  11 168 122  10
+-198 155  10 184 144  12 197 138  11 200 144  11
+-206 145  10 206 145  10 197 138  11 188 164 115
+-195 195 195 198 198 198 174 174 174  14  14  14
+-  2   2   6  22  22  22 116 116 116 116 116 116
+- 22  22  22   2   2   6  74  74  74  70  70  70
+- 30  30  30  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 50  50  50 101 101 101  26  26  26  10  10  10
+-138 138 138 190 190 190 174 154 114 156 107  11
+-197 138  11 200 144  11 197 138  11 192 133   9
+-180 123   7 190 142  34 190 178 144 187 187 187
+-202 202 202 221 221 221 214 214 214  66  66  66
+-  2   2   6   2   2   6  50  50  50  62  62  62
+-  6   6   6   2   2   6  10  10  10  90  90  90
+- 50  50  50  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0  10  10  10  34  34  34
+- 74  74  74  74  74  74   2   2   6   6   6   6
+-144 144 144 198 198 198 190 190 190 178 166 146
+-154 121  60 156 107  11 156 107  11 168 124  44
+-174 154 114 187 187 187 190 190 190 210 210 210
+-246 246 246 253 253 253 253 253 253 182 182 182
+-  6   6   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  62  62  62
+- 74  74  74  34  34  34  14  14  14   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0  10  10  10  22  22  22  54  54  54
+- 94  94  94  18  18  18   2   2   6  46  46  46
+-234 234 234 221 221 221 190 190 190 190 190 190
+-190 190 190 187 187 187 187 187 187 190 190 190
+-190 190 190 195 195 195 214 214 214 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+- 82  82  82   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  14  14  14
+- 86  86  86  54  54  54  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  18  18  18  46  46  46  90  90  90
+- 46  46  46  18  18  18   6   6   6 182 182 182
+-253 253 253 246 246 246 206 206 206 190 190 190
+-190 190 190 190 190 190 190 190 190 190 190 190
+-206 206 206 231 231 231 250 250 250 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-202 202 202  14  14  14   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 42  42  42  86  86  86  42  42  42  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 14  14  14  38  38  38  74  74  74  66  66  66
+-  2   2   6   6   6   6  90  90  90 250 250 250
+-253 253 253 253 253 253 238 238 238 198 198 198
+-190 190 190 190 190 190 195 195 195 221 221 221
+-246 246 246 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253  82  82  82   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  78  78  78  70  70  70  34  34  34
+- 14  14  14   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 34  34  34  66  66  66  78  78  78   6   6   6
+-  2   2   6  18  18  18 218 218 218 253 253 253
+-253 253 253 253 253 253 253 253 253 246 246 246
+-226 226 226 231 231 231 246 246 246 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 178 178 178   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  18  18  18  90  90  90  62  62  62
+- 30  30  30  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0  10  10  10  26  26  26
+- 58  58  58  90  90  90  18  18  18   2   2   6
+-  2   2   6 110 110 110 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-250 250 250 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 231 231 231  18  18  18   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  18  18  18  94  94  94
+- 54  54  54  26  26  26  10  10  10   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  22  22  22  50  50  50
+- 90  90  90  26  26  26   2   2   6   2   2   6
+- 14  14  14 195 195 195 250 250 250 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-250 250 250 242 242 242  54  54  54   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  38  38  38
+- 86  86  86  50  50  50  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  14  14  14  38  38  38  82  82  82
+- 34  34  34   2   2   6   2   2   6   2   2   6
+- 42  42  42 195 195 195 246 246 246 253 253 253
+-253 253 253 253 253 253 253 253 253 250 250 250
+-242 242 242 242 242 242 250 250 250 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 250 250 250 246 246 246 238 238 238
+-226 226 226 231 231 231 101 101 101   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 38  38  38  82  82  82  42  42  42  14  14  14
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 10  10  10  26  26  26  62  62  62  66  66  66
+-  2   2   6   2   2   6   2   2   6   6   6   6
+- 70  70  70 170 170 170 206 206 206 234 234 234
+-246 246 246 250 250 250 250 250 250 238 238 238
+-226 226 226 231 231 231 238 238 238 250 250 250
+-250 250 250 250 250 250 246 246 246 231 231 231
+-214 214 214 206 206 206 202 202 202 202 202 202
+-198 198 198 202 202 202 182 182 182  18  18  18
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  62  62  62  66  66  66  30  30  30
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 14  14  14  42  42  42  82  82  82  18  18  18
+-  2   2   6   2   2   6   2   2   6  10  10  10
+- 94  94  94 182 182 182 218 218 218 242 242 242
+-250 250 250 253 253 253 253 253 253 250 250 250
+-234 234 234 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 246 246 246
+-238 238 238 226 226 226 210 210 210 202 202 202
+-195 195 195 195 195 195 210 210 210 158 158 158
+-  6   6   6  14  14  14  50  50  50  14  14  14
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  86  86  86  46  46  46
+- 18  18  18   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 22  22  22  54  54  54  70  70  70   2   2   6
+-  2   2   6  10  10  10   2   2   6  22  22  22
+-166 166 166 231 231 231 250 250 250 253 253 253
+-253 253 253 253 253 253 253 253 253 250 250 250
+-242 242 242 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 246 246 246
+-231 231 231 206 206 206 198 198 198 226 226 226
+- 94  94  94   2   2   6   6   6   6  38  38  38
+- 30  30  30   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  62  62  62  66  66  66
+- 26  26  26  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  74  74  74  50  50  50   2   2   6
+- 26  26  26  26  26  26   2   2   6 106 106 106
+-238 238 238 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 246 246 246 218 218 218 202 202 202
+-210 210 210  14  14  14   2   2   6   2   2   6
+- 30  30  30  22  22  22   2   2   6   2   2   6
+-  2   2   6   2   2   6  18  18  18  86  86  86
+- 42  42  42  14  14  14   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 42  42  42  90  90  90  22  22  22   2   2   6
+- 42  42  42   2   2   6  18  18  18 218 218 218
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 250 250 250 221 221 221
+-218 218 218 101 101 101   2   2   6  14  14  14
+- 18  18  18  38  38  38  10  10  10   2   2   6
+-  2   2   6   2   2   6   2   2   6  78  78  78
+- 58  58  58  22  22  22   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 54  54  54  82  82  82   2   2   6  26  26  26
+- 22  22  22   2   2   6 123 123 123 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 250 250 250
+-238 238 238 198 198 198   6   6   6  38  38  38
+- 58  58  58  26  26  26  38  38  38   2   2   6
+-  2   2   6   2   2   6   2   2   6  46  46  46
+- 78  78  78  30  30  30  10  10  10   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0  10  10  10  30  30  30
+- 74  74  74  58  58  58   2   2   6  42  42  42
+-  2   2   6  22  22  22 231 231 231 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 250 250 250
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 246 246 246  46  46  46  38  38  38
+- 42  42  42  14  14  14  38  38  38  14  14  14
+-  2   2   6   2   2   6   2   2   6   6   6   6
+- 86  86  86  46  46  46  14  14  14   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  14  14  14  42  42  42
+- 90  90  90  18  18  18  18  18  18  26  26  26
+-  2   2   6 116 116 116 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 250 250 250 238 238 238
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253  94  94  94   6   6   6
+-  2   2   6   2   2   6  10  10  10  34  34  34
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 74  74  74  58  58  58  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0  10  10  10  26  26  26  66  66  66
+- 82  82  82   2   2   6  38  38  38   6   6   6
+- 14  14  14 210 210 210 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 246 246 246 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 144 144 144   2   2   6
+-  2   2   6   2   2   6   2   2   6  46  46  46
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 42  42  42  74  74  74  30  30  30  10  10  10
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  14  14  14  42  42  42  90  90  90
+- 26  26  26   6   6   6  42  42  42   2   2   6
+- 74  74  74 250 250 250 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 242 242 242 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 182 182 182   2   2   6
+-  2   2   6   2   2   6   2   2   6  46  46  46
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 10  10  10  86  86  86  38  38  38  10  10  10
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 10  10  10  26  26  26  66  66  66  82  82  82
+-  2   2   6  22  22  22  18  18  18   2   2   6
+-149 149 149 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 206 206 206   2   2   6
+-  2   2   6   2   2   6   2   2   6  38  38  38
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  6   6   6  86  86  86  46  46  46  14  14  14
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 18  18  18  46  46  46  86  86  86  18  18  18
+-  2   2   6  34  34  34  10  10  10   6   6   6
+-210 210 210 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 221 221 221   6   6   6
+-  2   2   6   2   2   6   6   6   6  30  30  30
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  82  82  82  54  54  54  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 26  26  26  66  66  66  62  62  62   2   2   6
+-  2   2   6  38  38  38  10  10  10  26  26  26
+-238 238 238 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 238 238 238
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231   6   6   6
+-  2   2   6   2   2   6  10  10  10  30  30  30
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  66  66  66  58  58  58  22  22  22
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  78  78  78   6   6   6   2   2   6
+-  2   2   6  46  46  46  14  14  14  42  42  42
+-246 246 246 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234  10  10  10
+-  2   2   6   2   2   6  22  22  22  14  14  14
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  66  66  66  62  62  62  22  22  22
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 50  50  50  74  74  74   2   2   6   2   2   6
+- 14  14  14  70  70  70  34  34  34  62  62  62
+-250 250 250 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 246 246 246
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234  14  14  14
+-  2   2   6   2   2   6  30  30  30   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  66  66  66  62  62  62  22  22  22
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 54  54  54  62  62  62   2   2   6   2   2   6
+-  2   2   6  30  30  30  46  46  46  70  70  70
+-250 250 250 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 246 246 246
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 226 226 226  10  10  10
+-  2   2   6   6   6   6  30  30  30   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  66  66  66  58  58  58  22  22  22
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  22  22  22
+- 58  58  58  62  62  62   2   2   6   2   2   6
+-  2   2   6   2   2   6  30  30  30  78  78  78
+-250 250 250 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 246 246 246
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 206 206 206   2   2   6
+- 22  22  22  34  34  34  18  14   6  22  22  22
+- 26  26  26  18  18  18   6   6   6   2   2   6
+-  2   2   6  82  82  82  54  54  54  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  26  26  26
+- 62  62  62 106 106 106  74  54  14 185 133  11
+-210 162  10 121  92   8   6   6   6  62  62  62
+-238 238 238 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 246 246 246
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 158 158 158  18  18  18
+- 14  14  14   2   2   6   2   2   6   2   2   6
+-  6   6   6  18  18  18  66  66  66  38  38  38
+-  6   6   6  94  94  94  50  50  50  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 10  10  10  10  10  10  18  18  18  38  38  38
+- 78  78  78 142 134 106 216 158  10 242 186  14
+-246 190  14 246 190  14 156 118  10  10  10  10
+- 90  90  90 238 238 238 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 250 250 250
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 246 230 190
+-238 204  91 238 204  91 181 142  44  37  26   9
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  38  38  38  46  46  46
+- 26  26  26 106 106 106  54  54  54  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  14  14  14  22  22  22
+- 30  30  30  38  38  38  50  50  50  70  70  70
+-106 106 106 190 142  34 226 170  11 242 186  14
+-246 190  14 246 190  14 246 190  14 154 114  10
+-  6   6   6  74  74  74 226 226 226 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 250 250 250
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 228 184  62
+-241 196  14 241 208  19 232 195  16  38  30  10
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  30  30  30  26  26  26
+-203 166  17 154 142  90  66  66  66  26  26  26
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  18  18  18  38  38  38  58  58  58
+- 78  78  78  86  86  86 101 101 101 123 123 123
+-175 146  61 210 150  10 234 174  13 246 186  14
+-246 190  14 246 190  14 246 190  14 238 190  10
+-102  78  10   2   2   6  46  46  46 198 198 198
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 224 178  62
+-242 186  14 241 196  14 210 166  10  22  18   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   6   6   6 121  92   8
+-238 202  15 232 195  16  82  82  82  34  34  34
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 14  14  14  38  38  38  70  70  70 154 122  46
+-190 142  34 200 144  11 197 138  11 197 138  11
+-213 154  11 226 170  11 242 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-225 175  15  46  32   6   2   2   6  22  22  22
+-158 158 158 250 250 250 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 250 250 250 242 242 242 224 178  62
+-239 182  13 236 186  11 213 154  11  46  32   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  61  42   6 225 175  15
+-238 190  10 236 186  11 112 100  78  42  42  42
+- 14  14  14   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 22  22  22  54  54  54 154 122  46 213 154  11
+-226 170  11 230 174  11 226 170  11 226 170  11
+-236 178  12 242 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-241 196  14 184 144  12  10  10  10   2   2   6
+-  6   6   6 116 116 116 242 242 242 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 231 231 231 198 198 198 214 170  54
+-236 178  12 236 178  12 210 150  10 137  92   6
+- 18  14   6   2   2   6   2   2   6   2   2   6
+-  6   6   6  70  47   6 200 144  11 236 178  12
+-239 182  13 239 182  13 124 112  88  58  58  58
+- 22  22  22   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  70  70  70 180 133  36 226 170  11
+-239 182  13 242 186  14 242 186  14 246 186  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 232 195  16  98  70   6   2   2   6
+-  2   2   6   2   2   6  66  66  66 221 221 221
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 206 206 206 198 198 198 214 166  58
+-230 174  11 230 174  11 216 158  10 192 133   9
+-163 110   8 116  81   8 102  78  10 116  81   8
+-167 114   7 197 138  11 226 170  11 239 182  13
+-242 186  14 242 186  14 162 146  94  78  78  78
+- 34  34  34  14  14  14   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 30  30  30  78  78  78 190 142  34 226 170  11
+-239 182  13 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 241 196  14 203 166  17  22  18   6
+-  2   2   6   2   2   6   2   2   6  38  38  38
+-218 218 218 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-250 250 250 206 206 206 198 198 198 202 162  69
+-226 170  11 236 178  12 224 166  10 210 150  10
+-200 144  11 197 138  11 192 133   9 197 138  11
+-210 150  10 226 170  11 242 186  14 246 190  14
+-246 190  14 246 186  14 225 175  15 124 112  88
+- 62  62  62  30  30  30  14  14  14   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  78  78  78 174 135  50 224 166  10
+-239 182  13 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 241 196  14 139 102  15
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 78  78  78 250 250 250 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-250 250 250 214 214 214 198 198 198 190 150  46
+-219 162  10 236 178  12 234 174  13 224 166  10
+-216 158  10 213 154  11 213 154  11 216 158  10
+-226 170  11 239 182  13 246 190  14 246 190  14
+-246 190  14 246 190  14 242 186  14 206 162  42
+-101 101 101  58  58  58  30  30  30  14  14  14
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  74  74  74 174 135  50 216 158  10
+-236 178  12 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 241 196  14 226 184  13
+- 61  42   6   2   2   6   2   2   6   2   2   6
+- 22  22  22 238 238 238 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 226 226 226 187 187 187 180 133  36
+-216 158  10 236 178  12 239 182  13 236 178  12
+-230 174  11 226 170  11 226 170  11 230 174  11
+-236 178  12 242 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 186  14 239 182  13
+-206 162  42 106 106 106  66  66  66  34  34  34
+- 14  14  14   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 26  26  26  70  70  70 163 133  67 213 154  11
+-236 178  12 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 241 196  14
+-190 146  13  18  14   6   2   2   6   2   2   6
+- 46  46  46 246 246 246 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 221 221 221  86  86  86 156 107  11
+-216 158  10 236 178  12 242 186  14 246 186  14
+-242 186  14 239 182  13 239 182  13 242 186  14
+-242 186  14 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-242 186  14 225 175  15 142 122  72  66  66  66
+- 30  30  30  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 26  26  26  70  70  70 163 133  67 210 150  10
+-236 178  12 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-232 195  16 121  92   8  34  34  34 106 106 106
+-221 221 221 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-242 242 242  82  82  82  18  14   6 163 110   8
+-216 158  10 236 178  12 242 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 242 186  14 163 133  67
+- 46  46  46  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  78  78  78 163 133  67 210 150  10
+-236 178  12 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-241 196  14 215 174  15 190 178 144 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 218 218 218
+- 58  58  58   2   2   6  22  18   6 167 114   7
+-216 158  10 236 178  12 246 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 186  14 242 186  14 190 150  46
+- 54  54  54  22  22  22   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 38  38  38  86  86  86 180 133  36 213 154  11
+-236 178  12 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 232 195  16 190 146  13 214 214 214
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 250 250 250 170 170 170  26  26  26
+-  2   2   6   2   2   6  37  26   9 163 110   8
+-219 162  10 239 182  13 246 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 186  14 236 178  12 224 166  10 142 122  72
+- 46  46  46  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 50  50  50 109 106  95 192 133   9 224 166  10
+-242 186  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-242 186  14 226 184  13 210 162  10 142 110  46
+-226 226 226 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-198 198 198  66  66  66   2   2   6   2   2   6
+-  2   2   6   2   2   6  50  34   6 156 107  11
+-219 162  10 239 182  13 246 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 242 186  14
+-234 174  13 213 154  11 154 122  46  66  66  66
+- 30  30  30  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  22  22  22
+- 58  58  58 154 121  60 206 145  10 234 174  13
+-242 186  14 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 186  14 236 178  12 210 162  10 163 110   8
+- 61  42   6 138 138 138 218 218 218 250 250 250
+-253 253 253 253 253 253 253 253 253 250 250 250
+-242 242 242 210 210 210 144 144 144  66  66  66
+-  6   6   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  61  42   6 163 110   8
+-216 158  10 236 178  12 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 239 182  13 230 174  11 216 158  10
+-190 142  34 124 112  88  70  70  70  38  38  38
+- 18  18  18   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  22  22  22
+- 62  62  62 168 124  44 206 145  10 224 166  10
+-236 178  12 239 182  13 242 186  14 242 186  14
+-246 186  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 236 178  12 216 158  10 175 118   6
+- 80  54   7   2   2   6   6   6   6  30  30  30
+- 54  54  54  62  62  62  50  50  50  38  38  38
+- 14  14  14   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  80  54   7 167 114   7
+-213 154  11 236 178  12 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 242 186  14 239 182  13 239 182  13
+-230 174  11 210 150  10 174 135  50 124 112  88
+- 82  82  82  54  54  54  34  34  34  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 50  50  50 158 118  36 192 133   9 200 144  11
+-216 158  10 219 162  10 224 166  10 226 170  11
+-230 174  11 236 178  12 239 182  13 239 182  13
+-242 186  14 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 186  14 230 174  11 210 150  10 163 110   8
+-104  69   6  10  10  10   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  91  60   6 167 114   7
+-206 145  10 230 174  11 242 186  14 246 190  14
+-246 190  14 246 190  14 246 186  14 242 186  14
+-239 182  13 230 174  11 224 166  10 213 154  11
+-180 133  36 124 112  88  86  86  86  58  58  58
+- 38  38  38  22  22  22  10  10  10   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 34  34  34  70  70  70 138 110  50 158 118  36
+-167 114   7 180 123   7 192 133   9 197 138  11
+-200 144  11 206 145  10 213 154  11 219 162  10
+-224 166  10 230 174  11 239 182  13 242 186  14
+-246 186  14 246 186  14 246 186  14 246 186  14
+-239 182  13 216 158  10 185 133  11 152  99   6
+-104  69   6  18  14   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  80  54   7 152  99   6
+-192 133   9 219 162  10 236 178  12 239 182  13
+-246 186  14 242 186  14 239 182  13 236 178  12
+-224 166  10 206 145  10 192 133   9 154 121  60
+- 94  94  94  62  62  62  42  42  42  22  22  22
+- 14  14  14   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 18  18  18  34  34  34  58  58  58  78  78  78
+-101  98  89 124 112  88 142 110  46 156 107  11
+-163 110   8 167 114   7 175 118   6 180 123   7
+-185 133  11 197 138  11 210 150  10 219 162  10
+-226 170  11 236 178  12 236 178  12 234 174  13
+-219 162  10 197 138  11 163 110   8 130  83   6
+- 91  60   6  10  10  10   2   2   6   2   2   6
+- 18  18  18  38  38  38  38  38  38  38  38  38
+- 38  38  38  38  38  38  38  38  38  38  38  38
+- 38  38  38  38  38  38  26  26  26   2   2   6
+-  2   2   6   6   6   6  70  47   6 137  92   6
+-175 118   6 200 144  11 219 162  10 230 174  11
+-234 174  13 230 174  11 219 162  10 210 150  10
+-192 133   9 163 110   8 124 112  88  82  82  82
+- 50  50  50  30  30  30  14  14  14   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  14  14  14  22  22  22  34  34  34
+- 42  42  42  58  58  58  74  74  74  86  86  86
+-101  98  89 122 102  70 130  98  46 121  87  25
+-137  92   6 152  99   6 163 110   8 180 123   7
+-185 133  11 197 138  11 206 145  10 200 144  11
+-180 123   7 156 107  11 130  83   6 104  69   6
+- 50  34   6  54  54  54 110 110 110 101  98  89
+- 86  86  86  82  82  82  78  78  78  78  78  78
+- 78  78  78  78  78  78  78  78  78  78  78  78
+- 78  78  78  82  82  82  86  86  86  94  94  94
+-106 106 106 101 101 101  86  66  34 124  80   6
+-156 107  11 180 123   7 192 133   9 200 144  11
+-206 145  10 200 144  11 192 133   9 175 118   6
+-139 102  15 109 106  95  70  70  70  42  42  42
+- 22  22  22  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  10  10  10
+- 14  14  14  22  22  22  30  30  30  38  38  38
+- 50  50  50  62  62  62  74  74  74  90  90  90
+-101  98  89 112 100  78 121  87  25 124  80   6
+-137  92   6 152  99   6 152  99   6 152  99   6
+-138  86   6 124  80   6  98  70   6  86  66  30
+-101  98  89  82  82  82  58  58  58  46  46  46
+- 38  38  38  34  34  34  34  34  34  34  34  34
+- 34  34  34  34  34  34  34  34  34  34  34  34
+- 34  34  34  34  34  34  38  38  38  42  42  42
+- 54  54  54  82  82  82  94  86  76  91  60   6
+-134  86   6 156 107  11 167 114   7 175 118   6
+-175 118   6 167 114   7 152  99   6 121  87  25
+-101  98  89  62  62  62  34  34  34  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6   6   6   6  10  10  10
+- 18  18  18  22  22  22  30  30  30  42  42  42
+- 50  50  50  66  66  66  86  86  86 101  98  89
+-106  86  58  98  70   6 104  69   6 104  69   6
+-104  69   6  91  60   6  82  62  34  90  90  90
+- 62  62  62  38  38  38  22  22  22  14  14  14
+- 10  10  10  10  10  10  10  10  10  10  10  10
+- 10  10  10  10  10  10   6   6   6  10  10  10
+- 10  10  10  10  10  10  10  10  10  14  14  14
+- 22  22  22  42  42  42  70  70  70  89  81  66
+- 80  54   7 104  69   6 124  80   6 137  92   6
+-134  86   6 116  81   8 100  82  52  86  86  86
+- 58  58  58  30  30  30  14  14  14   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  10  10  10  14  14  14
+- 18  18  18  26  26  26  38  38  38  54  54  54
+- 70  70  70  86  86  86  94  86  76  89  81  66
+- 89  81  66  86  86  86  74  74  74  50  50  50
+- 30  30  30  14  14  14   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  18  18  18  34  34  34  58  58  58
+- 82  82  82  89  81  66  89  81  66  89  81  66
+- 94  86  66  94  86  76  74  74  74  50  50  50
+- 26  26  26  14  14  14   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6   6   6   6  14  14  14  18  18  18
+- 30  30  30  38  38  38  46  46  46  54  54  54
+- 50  50  50  42  42  42  30  30  30  18  18  18
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  14  14  14  26  26  26
+- 38  38  38  50  50  50  58  58  58  58  58  58
+- 54  54  54  42  42  42  30  30  30  18  18  18
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+-  6   6   6  10  10  10  14  14  14  18  18  18
+- 18  18  18  14  14  14  10  10  10   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 14  14  14  18  18  18  22  22  22  22  22  22
+- 18  18  18  14  14  14  10  10  10   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 1 0  0 0 0  0 0 0  1 1 0
++0 1 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  1 1 0  0 0 0  0 0 0
++0 1 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 0
++10 15 3  2 3 1  12 18 4  42 61 14  19 27 6  11 16 4
++38 55 13  10 15 3  3 4 1  10 15 3  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 3 1
++12 18 4  1 1 0  23 34 8  31 45 11  10 15 3  32 47 11
++34 49 12  3 4 1  3 4 1  3 4 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  10 15 3  29 42 10  26 37 9  12 18 4
++55 80 19  81 118 28  55 80 19  92 132 31  106 153 36  69 100 23
++100 144 34  80 116 27  42 61 14  81 118 28  23 34 8  27 40 9
++15 21 5  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  1 1 0  29 42 10  15 21 5  50 72 17
++74 107 25  45 64 15  102 148 35  80 116 27  84 121 28  111 160 38
++69 100 23  65 94 22  81 118 28  29 42 10  17 25 6  29 42 10
++23 34 8  2 3 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 4 1
++15 21 5  15 21 5  34 49 12  101 146 34  111 161 38  97 141 33
++97 141 33  119 172 41  117 170 40  116 167 40  118 170 40  118 171 40
++117 169 40  118 170 40  111 160 38  118 170 40  96 138 32  89 128 30
++81 118 28  11 16 4  10 15 3  1 1 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++3 4 1  3 4 1  34 49 12  101 146 34  79 115 27  111 160 38
++114 165 39  113 163 39  118 170 40  117 169 40  118 171 40  117 169 40
++116 167 40  119 172 41  113 163 39  92 132 31  105 151 36  113 163 39
++75 109 26  19 27 6  16 23 5  11 16 4  0 1 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  10 15 3
++80 116 27  106 153 36  105 151 36  114 165 39  118 170 40  118 171 40
++118 171 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 170 40  117 169 40  118 170 40  118 170 40
++117 170 40  75 109 26  75 109 26  34 49 12  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 4 1
++64 92 22  65 94 22  100 144 34  118 171 40  118 170 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 171 41  118 170 40  117 169 40
++109 158 37  105 151 36  104 150 35  47 69 16  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++42 61 14  115 167 39  118 170 40  117 169 40  117 169 40  117 169 40
++117 170 40  117 170 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  118 170 40  96 138 32  17 25 6  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  47 69 16
++114 165 39  117 168 40  117 170 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  118 170 40  117 169 40  117 169 40  117 169 40
++117 170 40  119 172 41  96 138 32  12 18 4  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  10 15 3
++32 47 11  105 151 36  118 170 40  117 169 40  117 169 40  116 168 40
++109 157 37  111 160 38  117 169 40  118 171 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 171 40  69 100 23  2 3 1
++0 0 0  0 0 0  0 0 0  0 0 0  19 27 6  101 146 34
++118 171 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 170 40
++118 171 40  115 166 39  107 154 36  111 161 38  117 169 40  117 169 40
++117 169 40  118 171 40  75 109 26  19 27 6  2 3 1  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  16 23 5
++89 128 30  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++111 160 38  92 132 31  79 115 27  96 138 32  115 166 39  119 171 41
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 170 40  109 157 37  26 37 9
++0 0 0  0 0 0  0 0 0  0 0 0  64 92 22  118 171 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 170 40  118 171 40  109 157 37
++89 128 30  81 118 28  100 144 34  115 166 39  117 169 40  117 169 40
++117 169 40  117 170 40  113 163 39  60 86 20  1 1 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++27 40 9  96 138 32  118 170 40  117 169 40  117 169 40  117 169 40
++117 170 40  117 169 40  101 146 34  67 96 23  55 80 19  84 121 28
++113 163 39  119 171 41  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  119 171 41  65 94 22
++0 0 0  0 0 0  0 0 0  15 21 5  101 146 34  118 171 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  118 170 40  118 171 40  104 150 35  69 100 23  53 76 18
++81 118 28  111 160 38  118 170 40  117 169 40  117 169 40  117 169 40
++117 169 40  114 165 39  69 100 23  10 15 3  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 0
++31 45 11  77 111 26  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  118 170 40  116 168 40  92 132 31  47 69 16
++38 55 13  81 118 28  113 163 39  119 171 41  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 171 41  92 132 31
++10 15 3  0 0 0  0 0 0  36 52 12  115 166 39  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  118 170 40
++118 171 40  102 148 35  64 92 22  34 49 12  65 94 22  106 153 36
++118 171 40  117 170 40  117 169 40  117 169 40  117 169 40  117 169 40
++118 170 40  107 154 36  55 80 19  15 21 5  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++29 42 10  101 146 34  118 171 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 171 40  113 163 39
++75 109 26  27 40 9  36 52 12  89 128 30  116 167 40  118 171 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 170 40  104 150 35
++16 23 5  0 0 0  0 0 0  53 76 18  118 171 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  119 171 41  109 157 37
++67 96 23  23 34 8  42 61 14  96 138 32  118 170 40  118 170 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  74 107 25  10 15 3  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  31 45 11  101 146 34  118 170 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++119 171 41  102 148 35  47 69 16  14 20 5  50 72 17  102 148 35
++118 171 40  117 169 40  117 169 40  117 169 40  118 170 40  102 148 35
++15 21 5  0 0 0  0 0 0  50 72 17  118 170 40  117 169 40
++117 169 40  117 169 40  118 170 40  116 167 40  84 121 28  27 40 9
++19 27 6  74 107 25  114 165 39  118 171 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  75 109 26  10 15 4  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  38 55 13  102 148 35  118 171 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  118 170 40  115 167 39  77 111 26  17 25 6  19 27 6
++77 111 26  115 166 39  118 170 40  117 169 40  119 172 41  81 118 28
++3 4 1  0 0 0  0 0 0  27 40 9  111 160 38  118 170 40
++117 169 40  118 171 40  105 151 36  50 72 17  10 15 3  38 55 13
++100 144 34  118 171 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  79 115 27  15 21 5  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  10 15 3  64 92 22  111 160 38  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 171 40  96 138 32  32 47 11
++3 4 1  50 72 17  107 154 36  120 173 41  105 151 36  31 45 11
++0 0 0  0 0 0  0 0 0  3 4 1  65 94 22  117 169 40
++118 170 40  89 128 30  26 37 9  3 4 1  60 86 20  111 161 38
++118 171 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++97 141 33  36 52 12  1 1 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  14 20 5  75 109 26  117 168 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 171 40  107 154 36
++45 64 15  2 3 1  31 45 11  75 109 26  32 47 11  0 1 0
++0 0 0  0 0 0  0 0 0  0 0 0  10 15 3  55 80 19
++65 94 22  11 16 4  11 16 4  75 109 26  116 168 40  118 170 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 170 40  107 154 36
++47 69 16  3 4 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  12 18 4  69 100 23  111 161 38  118 171 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  118 170 40
++111 160 38  50 72 17  2 3 1  2 3 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 0
++1 1 0  12 18 4  81 118 28  118 170 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 170 40  118 171 40  101 146 34
++42 61 14  2 3 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  3 4 1  36 52 12  89 128 30
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++118 171 41  101 146 34  14 20 5  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  47 69 16  118 170 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 170 40  111 160 38  69 100 23  19 27 6
++0 1 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  11 16 4  69 100 23
++115 167 39  119 172 41  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++119 172 41  75 109 26  3 4 1  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  23 34 8  106 153 36  118 170 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  118 170 40  119 172 41  105 151 36  42 61 14  2 3 1
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  1 1 0  15 21 5
++45 64 15  80 116 27  114 165 39  118 170 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  119 172 41
++97 141 33  20 30 7  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  1 1 0  53 76 18  114 165 39  118 171 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++118 171 40  104 150 35  64 92 22  31 45 11  10 15 3  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  36 52 12  97 141 33  109 158 37  113 163 39  116 168 40
++117 169 40  117 170 40  118 170 40  119 172 41  115 167 39  84 121 28
++23 34 8  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  3 4 1  50 72 17  102 148 35  118 171 40
++119 171 41  118 170 40  117 169 40  117 169 40  115 166 39  111 161 38
++109 157 37  79 115 27  12 18 4  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  3 4 1  15 21 5  23 34 8  45 64 15  106 153 36
++116 167 40  111 160 38  101 146 34  79 115 27  42 61 14  10 15 3
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  1 1 0  20 30 7  60 86 20
++89 128 30  106 153 36  113 163 39  117 169 40  84 121 28  29 42 10
++19 27 6  10 15 3  2 3 1  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  16 23 5  38 55 13
++36 52 12  26 37 9  12 18 4  2 3 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  1 0 0  19 2 7  52 5 18
++78 7 27  88 8 31  81 7 29  56 5 19  25 2 9  3 0 1
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++3 4 1  19 27 6  31 45 11  38 55 13  32 47 11  3 4 1
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 0 1
++9 0 3  12 1 4  9 0 3  4 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  28 3 10  99 9 35  156 14 55  182 16 64
++189 17 66  190 17 67  189 17 66  184 17 65  166 15 58  118 13 41
++45 4 16  3 0 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  11 1 4  52 5 18  101 9 35  134 12 47
++151 14 53  154 14 54  151 14 53  113 10 40  11 1 4  0 0 0
++3 0 1  67 6 24  159 14 56  190 17 67  190 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  191 17 67
++174 16 61  101 9 35  14 1 5  0 0 0  35 3 12  108 10 38
++122 11 43  122 11 43  112 10 39  87 8 30  50 5 17  13 1 5
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++3 0 1  56 5 19  141 13 49  182 16 64  191 17 67  191 17 67
++190 17 67  190 17 67  191 17 67  113 10 40  3 0 1  1 0 0
++79 7 28  180 16 63  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++189 17 66  188 17 66  122 11 43  11 1 4  41 4 14  176 16 62
++191 17 67  191 17 67  191 17 67  190 17 67  181 16 63  146 13 51
++75 7 26  10 1 4  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  7 1 2
++90 8 32  178 16 62  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  190 17 67  141 13 49  22 2 8  0 0 0  41 4 14
++173 16 61  190 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  88 8 31  1 0 0  89 8 31
++185 17 65  189 17 66  188 17 66  188 17 66  189 17 66  191 17 67
++186 17 65  124 11 43  25 2 9  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  2 0 1  89 8 31
++184 17 65  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  151 14 53  34 3 12  0 0 0  0 0 0  79 7 28
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  191 17 67  146 13 51  9 1 3  7 1 2
++108 10 38  187 17 66  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  190 17 67  141 13 49  22 2 8  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  52 5 18  176 16 62
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++151 14 53  38 3 13  0 0 0  0 0 0  0 0 0  50 5 17
++180 16 63  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  191 17 67  141 13 49  7 1 3  0 0 0
++11 1 4  112 10 39  187 17 66  189 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  190 17 67  113 10 40  5 0 2  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  7 1 3  132 12 46  191 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  146 13 51
++35 3 12  0 0 0  0 0 0  0 0 0  0 0 0  5 0 2
++101 9 35  185 17 65  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  190 17 67  180 16 63  67 6 24  0 0 0  0 0 0
++0 0 0  11 1 4  108 10 38  186 17 65  189 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  180 16 63  56 5 19  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  44 4 15  177 16 62  189 17 66
++188 17 66  188 17 66  189 17 66  189 17 66  134 12 47  28 3 10
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++8 1 3  79 7 28  159 14 56  188 17 66  191 17 67  190 17 67
++189 17 66  189 17 66  189 17 66  189 17 66  190 17 67  191 17 67
++188 17 66  158 14 55  72 7 25  4 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  8 1 3  95 9 33  182 16 64  189 17 67
++188 17 66  188 17 66  188 17 66  191 17 67  122 11 43  3 0 1
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  88 8 31  190 17 67  188 17 66
++188 17 66  189 17 66  185 17 65  113 10 40  18 2 6  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  1 0 0  24 2 8  77 7 27  124 11 43  154 14 54
++168 15 59  173 16 61  173 16 61  168 15 59  154 14 54  124 11 43
++77 7 27  22 2 8  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  5 0 2  77 7 27  173 16 61
++190 17 67  188 17 66  188 17 66  190 17 67  164 15 57  23 2 8
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  1 0 0  118 13 41  191 17 67  188 17 66
++190 17 67  174 16 61  87 8 30  8 1 3  0 0 0  0 0 0
++0 0 0  0 0 0  10 1 4  29 3 10  40 4 14  36 3 13
++18 2 6  2 0 1  0 0 0  0 0 0  3 0 1  14 1 5
++26 2 9  33 3 11  32 3 11  25 2 9  13 1 5  3 0 1
++0 0 0  14 1 5  56 5 19  95 9 33  109 10 38  101 9 35
++77 7 27  35 3 12  5 0 2  0 0 0  1 0 0  56 5 19
++156 14 55  190 17 67  188 17 66  188 17 66  182 16 64  50 5 17
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  5 0 2  134 12 47  191 17 67  189 17 66
++151 14 53  52 5 18  2 0 1  0 0 0  0 0 0  1 0 0
++28 3 10  90 8 32  146 13 51  170 15 60  178 16 62  174 16 61
++158 14 55  112 10 39  40 4 14  1 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 0 1
++56 5 19  146 13 51  183 17 64  191 17 67  191 17 67  191 17 67
++188 17 66  173 16 61  122 11 43  41 4 14  1 0 0  0 0 0
++30 3 10  124 11 43  185 17 65  190 17 67  187 17 66  67 6 24
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  6 1 2  134 12 47  168 15 59  99 9 35
++21 2 7  0 0 0  0 0 0  0 0 0  6 1 2  77 7 27
++162 15 57  190 17 67  191 17 67  189 17 66  189 17 66  189 17 66
++190 17 67  191 17 67  169 15 59  75 7 26  3 0 1  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  2 0 1  79 7 28
++178 16 62  191 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  191 17 67  170 15 60  79 7 28  5 0 2
++0 0 0  10 1 3  78 7 27  159 14 56  188 17 66  75 7 26
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  1 0 0  35 3 12  29 3 10  2 0 1
++0 0 0  0 0 0  0 0 0  9 1 3  101 9 35  183 17 64
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  190 17 67  178 16 63  67 6 23  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  52 5 18  174 16 61
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  182 16 64  89 8 31
++4 0 1  0 0 0  0 0 0  25 2 9  73 7 26  31 3 11
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  4 0 1  98 9 34  187 17 66  189 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  158 14 55  25 2 9
++0 0 0  0 0 0  0 0 0  8 1 3  134 12 47  191 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  189 17 66  180 16 63
++68 6 24  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  6 1 2  19 2 7  3 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  65 6 23  180 16 63  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  189 17 66  83 8 29
++0 0 0  0 0 0  0 0 0  41 4 14  177 16 62  189 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++159 14 56  28 3 10  0 0 0  0 0 0  0 0 0  23 2 8
++41 4 14  5 0 2  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++23 2 8  113 10 40  159 14 56  65 6 23  0 0 0  0 0 0
++0 0 0  16 1 6  146 13 51  191 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  191 17 67  132 12 46
++5 0 2  0 0 0  0 0 0  77 7 27  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  98 9 34  0 0 0  0 0 0  12 1 4  134 12 47
++178 16 63  108 10 38  16 1 6  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  30 3 10
++141 13 49  190 17 67  191 17 67  134 12 47  6 1 2  0 0 0
++0 0 0  68 6 24  186 17 65  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  156 14 55
++14 1 5  0 0 0  0 0 0  98 9 34  191 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  156 14 55  19 2 7  0 0 0  47 4 16  181 16 63
++190 17 67  189 17 66  126 14 44  17 2 6  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  16 1 6  134 12 47
++191 17 67  188 17 66  190 17 67  162 15 57  19 2 7  0 0 0
++3 0 1  123 11 43  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  163 15 57
++20 2 7  0 0 0  0 0 0  101 9 35  191 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  182 16 64  52 5 18  0 0 0  73 7 26  188 17 66
++188 17 66  188 17 66  189 17 66  109 10 38  5 0 2  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  95 9 33  189 17 66
++188 17 66  188 17 66  189 17 66  171 15 60  29 3 10  0 0 0
++16 1 6  156 14 55  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  158 14 55
++17 2 6  0 0 0  0 0 0  85 8 30  190 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  81 7 29  0 0 0  85 8 30  190 17 67
++188 17 66  188 17 66  189 17 66  180 16 63  56 5 19  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  25 2 9  162 15 57  190 17 67
++188 17 66  188 17 66  189 17 66  173 16 61  31 3 11  0 0 0
++30 3 10  171 15 60  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  191 17 67  141 13 49
++7 1 2  0 0 0  0 0 0  56 5 19  183 17 64  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  191 17 67  98 9 34  0 0 0  88 8 31  190 17 67
++188 17 66  188 17 66  188 17 66  191 17 67  124 11 43  5 0 2
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  68 6 24  187 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  170 15 60  28 3 10  0 0 0
++34 3 12  174 16 61  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  191 17 67  101 9 35
++0 0 0  0 0 0  0 0 0  21 2 7  159 14 56  190 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  191 17 67  98 9 34  0 0 0  81 7 29  189 17 66
++188 17 66  188 17 66  188 17 66  189 17 66  168 15 59  28 3 10
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  109 10 38  191 17 67  188 17 66
++188 17 66  188 17 66  190 17 67  163 15 57  21 2 7  0 0 0
++26 2 9  168 15 59  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  189 17 66  180 16 63  47 4 16
++0 0 0  0 0 0  0 0 0  0 0 0  108 10 38  190 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  78 7 27  0 0 0  68 6 24  187 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  183 17 64  56 5 19
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  3 0 1  131 12 46  191 17 67  188 17 66
++188 17 66  188 17 66  190 17 67  151 14 53  12 1 4  0 0 0
++11 1 4  146 13 51  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  191 17 67  126 14 44  7 1 2
++0 0 0  0 0 0  0 0 0  0 0 0  32 3 11  164 15 58
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++189 17 66  178 16 62  44 4 15  0 0 0  50 5 17  182 16 64
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  72 7 25
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  5 0 2  134 12 47  191 17 67  188 17 66
++188 17 66  188 17 66  191 17 67  131 12 46  3 0 1  0 0 0
++0 0 0  101 9 35  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  190 17 67  170 15 60  44 4 15  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  77 7 27
++183 17 64  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++191 17 67  134 12 47  9 1 3  0 0 0  31 3 11  171 15 60
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  72 7 25
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  2 0 1  124 11 43  191 17 67  188 17 66
++188 17 66  188 17 66  191 17 67  101 9 35  0 0 0  0 0 0
++0 0 0  35 3 12  168 15 59  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  182 16 64  77 7 27  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  6 1 2
++99 9 35  185 17 65  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  189 17 66
++177 16 62  56 5 19  0 0 0  0 0 0  13 1 5  151 14 53
++190 17 67  188 17 66  188 17 66  188 17 66  185 17 65  56 5 19
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  99 9 35  191 17 67  188 17 66
++188 17 66  188 17 66  186 17 65  65 6 23  0 0 0  0 0 0
++0 0 0  0 0 0  79 7 28  182 16 64  190 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++191 17 67  177 16 62  83 8 29  4 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++8 1 3  89 8 31  175 16 62  191 17 67  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  181 16 63
++85 8 30  3 0 1  0 0 0  0 0 0  1 0 0  118 13 41
++191 17 67  188 17 66  188 17 66  189 17 66  173 16 61  34 3 12
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  56 5 19  183 17 64  188 17 66
++188 17 66  189 17 66  169 15 59  30 3 10  0 0 0  0 0 0
++0 0 0  0 0 0  5 0 2  83 8 29  173 16 61  191 17 67
++190 17 67  189 17 66  189 17 66  190 17 67  191 17 67  187 17 66
++151 14 53  56 5 19  3 0 1  0 0 0  16 1 6  50 5 17
++79 7 28  95 9 33  95 9 33  75 7 26  41 4 14  10 1 4
++0 0 0  2 0 1  50 5 17  132 12 46  178 16 62  190 17 67
++191 17 67  191 17 67  191 17 67  186 17 65  154 14 54  68 6 24
++4 0 1  0 0 0  0 0 0  0 0 0  0 0 0  72 7 25
++187 17 66  188 17 66  188 17 66  191 17 67  141 13 49  9 1 3
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  14 1 5  151 14 53  190 17 67
++188 17 66  191 17 67  131 12 46  5 0 2  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  2 0 1  44 4 15  113 10 40
++156 14 55  173 16 61  174 16 61  164 15 58  134 12 47  77 7 27
++18 2 6  0 0 0  16 1 6  85 8 30  151 14 53  182 16 64
++189 17 66  191 17 67  190 17 67  188 17 66  177 16 62  141 13 49
++68 6 24  8 1 3  0 0 0  8 1 3  44 4 15  88 8 31
++113 10 40  122 11 43  108 10 38  67 6 24  20 2 7  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  28 3 10
++166 15 58  190 17 67  188 17 66  187 17 66  79 7 28  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  73 7 26  185 17 65
++189 17 66  184 17 65  65 6 23  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 0 1
++17 2 6  32 3 11  34 3 12  22 2 8  6 1 2  0 0 0
++0 0 0  38 3 13  141 13 49  188 17 66  190 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  189 17 66  191 17 67
++184 17 65  122 11 43  21 2 7  0 0 0  0 0 0  0 0 0
++0 0 0  1 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 0 0
++108 10 38  191 17 67  191 17 67  141 13 49  16 1 6  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  8 1 3  112 10 39
++186 17 65  124 11 43  10 1 4  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++36 3 13  156 14 55  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++189 17 66  190 17 67  134 12 47  18 2 6  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  7 1 2  41 4 14  75 7 26  66 5 23  19 2 7
++26 2 9  144 13 50  154 14 54  40 4 14  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  13 1 5
++56 5 19  19 2 7  0 0 0  7 1 2  29 3 10  35 3 12
++19 2 7  2 0 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  13 1 5
++134 12 47  191 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 67  108 10 38  3 0 1  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 0 0
++40 4 14  124 11 43  177 16 62  188 17 66  187 17 66  144 13 50
++24 2 8  17 2 6  22 2 8  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  19 2 7  122 11 43  171 15 60  175 16 62
++159 14 56  112 10 39  40 4 14  2 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  72 7 25
++186 17 65  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  174 16 61  41 4 14  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  3 0 1  72 7 25
++168 15 59  191 17 67  189 17 66  188 17 66  188 17 66  190 17 67
++95 9 33  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  95 9 33  191 17 67  189 17 66  189 17 66
++190 17 67  191 17 67  171 15 60  90 8 32  12 1 4  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  5 0 2  132 12 46
++191 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  98 9 34  0 0 0
++0 0 0  0 0 0  0 0 0  5 0 2  88 8 31  180 16 63
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  191 17 67
++146 13 51  11 1 4  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  9 1 3  144 13 50  191 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  187 17 66  123 11 43  20 2 7
++0 0 0  0 0 0  0 0 0  0 0 0  21 2 7  163 15 57
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  191 17 67  134 12 47  5 0 2
++0 0 0  0 0 0  3 0 1  88 8 31  182 16 64  189 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  189 17 66
++171 15 60  31 3 11  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  20 2 7  162 15 57  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  132 12 46
++20 2 7  0 0 0  0 0 0  0 0 0  32 3 11  173 16 61
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  151 14 53  12 1 4
++0 0 0  0 0 0  72 7 25  180 16 63  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++181 16 63  47 4 16  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  21 2 7  163 15 57  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++122 11 43  9 1 3  0 0 0  0 0 0  30 3 10  171 15 60
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  146 13 51  10 1 4
++0 0 0  38 3 13  166 15 58  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++183 17 64  52 5 18  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  13 1 5  154 14 54  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++186 17 65  79 7 28  0 0 0  0 0 0  14 1 5  156 14 54
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  191 17 67  124 11 43  2 0 1
++5 0 2  122 11 43  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++182 16 64  47 4 16  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  3 0 1  126 14 44  191 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  158 14 55  23 2 8  0 0 0  1 0 0  113 10 40
++191 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  78 7 27  0 0 0
++47 4 16  177 16 62  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  189 17 66
++173 16 61  34 3 12  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  85 8 30  189 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  79 7 28  0 0 0  0 0 0  47 4 16
++175 16 62  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  190 17 67  156 14 55  22 2 8  0 0 0
++109 10 38  191 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++151 14 53  13 1 5  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  35 3 12  173 16 61  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  191 17 67  134 12 47  7 1 2  0 0 0  3 0 1
++99 9 35  188 17 66  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  181 16 63  68 6 24  0 0 0  18 2 6
++156 14 55  190 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++101 9 35  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  3 0 1  118 13 41  191 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  168 15 59  28 3 10  0 0 0  0 0 0
++12 1 4  113 10 40  187 17 66  189 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  180 16 63  88 8 31  4 0 1  0 0 0  47 4 16
++180 16 63  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  168 15 59
++36 3 13  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  38 3 13  164 15 58  190 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  182 16 64  50 5 17  0 0 0  0 0 0
++0 0 0  11 1 4  90 8 32  169 15 59  190 17 67  190 17 67
++189 17 66  189 17 66  189 17 66  189 17 66  191 17 67  189 17 66
++158 14 55  68 6 24  4 0 1  0 0 0  0 0 0  73 7 26
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  189 17 66  185 17 65  83 8 29
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  65 6 23  174 16 61
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  185 17 65  56 5 19  0 0 0  0 0 0
++0 0 0  0 0 0  2 0 1  35 3 12  99 9 35  146 13 51
++170 15 60  177 16 62  177 16 62  166 15 58  141 13 49  85 8 30
++24 2 8  0 0 0  0 0 0  0 0 0  0 0 0  85 8 30
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  189 17 66  112 10 39  8 1 3
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  1 0 0  68 6 24
++170 15 60  191 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  182 16 64  50 5 17  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  1 0 0  11 1 4
++28 3 10  40 4 14  38 3 13  25 2 9  8 1 3  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  78 7 27
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  187 17 66  113 10 40  14 1 5  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 0 0
++47 4 16  141 13 49  186 17 65  191 17 67  190 17 67  189 17 66
++189 17 66  191 17 67  156 14 55  20 2 7  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  44 4 15
++178 16 62  190 17 67  188 17 66  188 17 66  188 17 66  190 17 67
++191 17 67  173 16 61  90 8 32  10 1 4  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  14 1 5  68 6 24  131 12 46  162 15 57  174 16 61
++171 15 60  146 13 51  56 5 19  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  3 0 1  14 1 5  29 3 10
++41 4 14  47 4 16  50 5 17  45 4 16  34 3 12  18 2 6
++5 0 2  0 0 0  0 0 0  0 0 0  0 0 0  5 0 2
++90 8 32  169 15 59  185 17 65  187 17 66  182 16 64  163 15 57
++113 10 40  41 4 14  2 0 1  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  5 0 2  21 2 7  34 3 12
++29 3 10  11 1 4  0 0 0  0 0 0  0 0 0  0 0 0
++3 0 1  32 3 11  79 7 28  124 11 43  154 14 54  171 15 60
++180 16 63  182 16 64  182 16 64  180 16 63  174 16 61  159 14 56
++132 12 46  88 8 31  34 3 12  3 0 1  0 0 0  0 0 0
++3 0 1  29 3 10  56 5 19  65 6 23  50 5 17  23 2 8
++3 0 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  25 2 9
++109 10 38  169 15 59  189 17 66  191 17 67  190 17 67  189 17 66
++189 17 66  188 17 66  188 17 66  188 17 66  189 17 66  190 17 67
++191 17 67  190 17 67  171 15 60  98 9 34  10 1 3  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  14 1 5  141 13 49
++191 17 67  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 67  186 17 65  65 6 23  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  23 2 8  166 15 58
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  176 16 62  45 4 16  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  1 0 0  83 8 29
++183 17 64  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  185 17 65  95 9 33  3 0 1  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  5 0 2
++85 8 30  176 16 62  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++191 17 67  180 16 63  95 9 33  7 1 3  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++2 0 1  52 5 18  141 13 49  185 17 65  191 17 67  189 17 67
++189 17 66  188 17 66  188 17 66  189 17 66  191 17 67  187 17 66
++146 13 51  56 5 19  4 0 1  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  14 1 5  68 6 24  131 12 46  166 15 58
++180 16 63  183 17 64  180 16 63  168 15 59  134 12 47  75 7 26
++17 2 6  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  5 0 2  24 2 8
++44 4 15  52 5 18  45 4 16  26 2 9  6 1 2  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
+diff -urN linux-3.10/drivers/video/Makefile linux-rpi-3.10.y/drivers/video/Makefile
+--- linux-3.10/drivers/video/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/video/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -100,6 +100,7 @@
+ obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+ obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
+ obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
++obj-$(CONFIG_FB_BCM2708)	  += bcm2708_fb.o
+ obj-$(CONFIG_FB_68328)            += 68328fb.o
+ obj-$(CONFIG_FB_GBE)              += gbefb.o
+ obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
+diff -urN linux-3.10/include/uapi/linux/fb.h linux-rpi-3.10.y/include/uapi/linux/fb.h
+--- linux-3.10/include/uapi/linux/fb.h	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/include/uapi/linux/fb.h	2013-07-06 15:25:50.000000000 +0100
+@@ -34,6 +34,11 @@
+ #define FBIOPUT_MODEINFO        0x4617
+ #define FBIOGET_DISPINFO        0x4618
+ #define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
++/*
++ * HACK: use 'z' in order not to clash with any other ioctl numbers which might
++ * be concurrently added to the mainline kernel
++ */
++#define FBIOCOPYAREA		_IOW('z', 0x21, struct fb_copyarea)
+ 
+ #define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
+ #define FB_TYPE_PLANES			1	/* Non interleaved planes */
diff --git a/target/linux/brcm2708/patches-3.10/005-bcm2708-vchiq-driver.patch b/target/linux/brcm2708/patches-3.10/005-bcm2708-vchiq-driver.patch
new file mode 100644
index 0000000000..cd73ca4b5b
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/005-bcm2708-vchiq-driver.patch
@@ -0,0 +1,13559 @@
+diff -urN linux-3.10/drivers/char/broadcom/Kconfig linux-rpi-3.10.y/drivers/char/broadcom/Kconfig
+--- linux-3.10/drivers/char/broadcom/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/char/broadcom/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,17 @@
++#
++# Broadcom char driver config
++#
++
++menuconfig BRCM_CHAR_DRIVERS
++	tristate "Broadcom Char Drivers"
++	depends on PROC_FS
++	help
++	  Broadcom's char drivers
++
++config BCM_VC_CMA
++	bool "Videocore CMA"
++	depends on CMA
++	default n
++        help
++          Helper for videocore CMA access.
++
+diff -urN linux-3.10/drivers/char/broadcom/Makefile linux-rpi-3.10.y/drivers/char/broadcom/Makefile
+--- linux-3.10/drivers/char/broadcom/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/char/broadcom/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,2 @@
++obj-$(CONFIG_BCM_VC_CMA)	+= vc_cma/
++
+diff -urN linux-3.10/drivers/char/broadcom/vc_cma/Makefile linux-rpi-3.10.y/drivers/char/broadcom/vc_cma/Makefile
+--- linux-3.10/drivers/char/broadcom/vc_cma/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/char/broadcom/vc_cma/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,15 @@
++EXTRA_CFLAGS  += -Wall -Wstrict-prototypes -Wno-trigraphs
++EXTRA_CFLAGS  += -Werror
++EXTRA_CFLAGS  += -I"include/linux/broadcom"
++EXTRA_CFLAGS  += -I"drivers/misc/vc04_services"
++EXTRA_CFLAGS  += -I"drivers/misc/vc04_services/interface/vchi"
++EXTRA_CFLAGS  += -I"drivers/misc/vc04_services/interface/vchiq_arm"
++
++EXTRA_CFLAGS  += -D__KERNEL__
++EXTRA_CFLAGS  += -D__linux__
++EXTRA_CFLAGS  += -Werror
++
++obj-$(CONFIG_BCM_VC_CMA) += vc-cma.o
++
++vc-cma-objs := vc_cma.o
++
+diff -urN linux-3.10/drivers/char/broadcom/vc_cma/vc_cma.c linux-rpi-3.10.y/drivers/char/broadcom/vc_cma/vc_cma.c
+--- linux-3.10/drivers/char/broadcom/vc_cma/vc_cma.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/char/broadcom/vc_cma/vc_cma.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1145 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/kthread.h>
++#include <linux/fs.h>
++#include <linux/device.h>
++#include <linux/cdev.h>
++#include <linux/mm.h>
++#include <linux/proc_fs.h>
++#include <linux/seq_file.h>
++#include <linux/dma-mapping.h>
++#include <linux/dma-contiguous.h>
++#include <linux/platform_device.h>
++#include <linux/uaccess.h>
++#include <asm/cacheflush.h>
++
++#include "vc_cma.h"
++
++#include "vchiq_util.h"
++#include "vchiq_connected.h"
++//#include "debug_sym.h"
++//#include "vc_mem.h"
++
++#define DRIVER_NAME  "vc-cma"
++
++#define LOG_DBG(fmt, ...) \
++	if (vc_cma_debug) \
++		printk(KERN_INFO fmt "\n", ##__VA_ARGS__)
++#define LOG_ERR(fmt, ...) \
++	printk(KERN_ERR fmt "\n", ##__VA_ARGS__)
++
++#define VC_CMA_FOURCC VCHIQ_MAKE_FOURCC('C', 'M', 'A', ' ')
++#define VC_CMA_VERSION 2
++
++#define VC_CMA_CHUNK_ORDER 6	/* 256K */
++#define VC_CMA_CHUNK_SIZE (4096 << VC_CMA_CHUNK_ORDER)
++#define VC_CMA_MAX_PARAMS_PER_MSG \
++	((VCHIQ_MAX_MSG_SIZE - sizeof(unsigned short))/sizeof(unsigned short))
++#define VC_CMA_RESERVE_COUNT_MAX 16
++
++#define PAGES_PER_CHUNK (VC_CMA_CHUNK_SIZE / PAGE_SIZE)
++
++#define VCADDR_TO_PHYSADDR(vcaddr) (mm_vc_mem_phys_addr + vcaddr)
++
++#define loud_error(...) \
++	LOG_ERR("===== " __VA_ARGS__)
++
++enum {
++	VC_CMA_MSG_QUIT,
++	VC_CMA_MSG_OPEN,
++	VC_CMA_MSG_TICK,
++	VC_CMA_MSG_ALLOC,	/* chunk count */
++	VC_CMA_MSG_FREE,	/* chunk, chunk, ... */
++	VC_CMA_MSG_ALLOCATED,	/* chunk, chunk, ... */
++	VC_CMA_MSG_REQUEST_ALLOC,	/* chunk count */
++	VC_CMA_MSG_REQUEST_FREE,	/* chunk count */
++	VC_CMA_MSG_RESERVE,	/* bytes lo, bytes hi */
++	VC_CMA_MSG_UPDATE_RESERVE,
++	VC_CMA_MSG_MAX
++};
++
++struct cma_msg {
++	unsigned short type;
++	unsigned short params[VC_CMA_MAX_PARAMS_PER_MSG];
++};
++
++struct vc_cma_reserve_user {
++	unsigned int pid;
++	unsigned int reserve;
++};
++
++/* Device (/dev) related variables */
++static dev_t vc_cma_devnum;
++static struct class *vc_cma_class;
++static struct cdev vc_cma_cdev;
++static int vc_cma_inited;
++static int vc_cma_debug;
++
++/* Proc entry */
++static struct proc_dir_entry *vc_cma_proc_entry;
++
++phys_addr_t vc_cma_base;
++struct page *vc_cma_base_page;
++unsigned int vc_cma_size;
++EXPORT_SYMBOL(vc_cma_size);
++unsigned int vc_cma_initial;
++unsigned int vc_cma_chunks;
++unsigned int vc_cma_chunks_used;
++unsigned int vc_cma_chunks_reserved;
++
++static int in_loud_error;
++
++unsigned int vc_cma_reserve_total;
++unsigned int vc_cma_reserve_count;
++struct vc_cma_reserve_user vc_cma_reserve_users[VC_CMA_RESERVE_COUNT_MAX];
++static DEFINE_SEMAPHORE(vc_cma_reserve_mutex);
++static DEFINE_SEMAPHORE(vc_cma_worker_queue_push_mutex);
++
++static u64 vc_cma_dma_mask = DMA_BIT_MASK(32);
++static struct platform_device vc_cma_device = {
++	.name = "vc-cma",
++	.id = 0,
++	.dev = {
++		.dma_mask = &vc_cma_dma_mask,
++		.coherent_dma_mask = DMA_BIT_MASK(32),
++		},
++};
++
++static VCHIQ_INSTANCE_T cma_instance;
++static VCHIQ_SERVICE_HANDLE_T cma_service;
++static VCHIU_QUEUE_T cma_msg_queue;
++static struct task_struct *cma_worker;
++
++static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid);
++static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply);
++static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason,
++					   VCHIQ_HEADER_T * header,
++					   VCHIQ_SERVICE_HANDLE_T service,
++					   void *bulk_userdata);
++static void send_vc_msg(unsigned short type,
++			unsigned short param1, unsigned short param2);
++static bool send_worker_msg(VCHIQ_HEADER_T * msg);
++
++static int early_vc_cma_mem(char *p)
++{
++	unsigned int new_size;
++	printk(KERN_NOTICE "early_vc_cma_mem(%s)", p);
++	vc_cma_size = memparse(p, &p);
++	vc_cma_initial = vc_cma_size;
++	if (*p == '/')
++		vc_cma_size = memparse(p + 1, &p);
++	if (*p == '@')
++		vc_cma_base = memparse(p + 1, &p);
++
++	new_size = (vc_cma_size - ((-vc_cma_base) & (VC_CMA_CHUNK_SIZE - 1)))
++	    & ~(VC_CMA_CHUNK_SIZE - 1);
++	if (new_size > vc_cma_size)
++		vc_cma_size = 0;
++	vc_cma_initial = (vc_cma_initial + VC_CMA_CHUNK_SIZE - 1)
++	    & ~(VC_CMA_CHUNK_SIZE - 1);
++	if (vc_cma_initial > vc_cma_size)
++		vc_cma_initial = vc_cma_size;
++	vc_cma_base = (vc_cma_base + VC_CMA_CHUNK_SIZE - 1)
++	    & ~(VC_CMA_CHUNK_SIZE - 1);
++
++	printk(KERN_NOTICE " -> initial %x, size %x, base %x", vc_cma_initial,
++	       vc_cma_size, (unsigned int)vc_cma_base);
++
++	return 0;
++}
++
++early_param("vc-cma-mem", early_vc_cma_mem);
++
++void vc_cma_early_init(void)
++{
++	LOG_DBG("vc_cma_early_init - vc_cma_chunks = %d", vc_cma_chunks);
++	if (vc_cma_size) {
++		int rc = platform_device_register(&vc_cma_device);
++		LOG_DBG("platform_device_register -> %d", rc);
++	}
++}
++
++void vc_cma_reserve(void)
++{
++	/* if vc_cma_size is set, then declare vc CMA area of the same
++	 * size from the end of memory
++	 */
++	if (vc_cma_size) {
++		if (dma_declare_contiguous(NULL /*&vc_cma_device.dev*/, vc_cma_size,
++					   vc_cma_base, 0) == 0) {
++		} else {
++			LOG_ERR("vc_cma: dma_declare_contiguous(%x,%x) failed",
++				vc_cma_size, (unsigned int)vc_cma_base);
++			vc_cma_size = 0;
++		}
++	}
++	vc_cma_chunks = vc_cma_size / VC_CMA_CHUNK_SIZE;
++}
++
++/****************************************************************************
++*
++*   vc_cma_open
++*
++***************************************************************************/
++
++static int vc_cma_open(struct inode *inode, struct file *file)
++{
++	(void)inode;
++	(void)file;
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_cma_release
++*
++***************************************************************************/
++
++static int vc_cma_release(struct inode *inode, struct file *file)
++{
++	(void)inode;
++	(void)file;
++
++	vc_cma_set_reserve(0, current->tgid);
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_cma_ioctl
++*
++***************************************************************************/
++
++static long vc_cma_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	int rc = 0;
++
++	(void)cmd;
++	(void)arg;
++
++	switch (cmd) {
++	case VC_CMA_IOC_RESERVE:
++		rc = vc_cma_set_reserve((unsigned int)arg, current->tgid);
++		if (rc >= 0)
++			rc = 0;
++		break;
++	default:
++		LOG_ERR("vc-cma: Unknown ioctl %x", cmd);
++		return -ENOTTY;
++	}
++
++	return rc;
++}
++
++/****************************************************************************
++*
++*   File Operations for the driver.
++*
++***************************************************************************/
++
++static const struct file_operations vc_cma_fops = {
++	.owner = THIS_MODULE,
++	.open = vc_cma_open,
++	.release = vc_cma_release,
++	.unlocked_ioctl = vc_cma_ioctl,
++};
++
++/****************************************************************************
++*
++*   vc_cma_proc_open
++*
++***************************************************************************/
++
++static int vc_cma_show_info(struct seq_file *m, void *v)
++{
++	int i;
++
++	seq_printf(m, "Videocore CMA:\n");
++	seq_printf(m, "   Base       : %08x\n", (unsigned int)vc_cma_base);
++	seq_printf(m, "   Length     : %08x\n", vc_cma_size);
++	seq_printf(m, "   Initial    : %08x\n", vc_cma_initial);
++	seq_printf(m, "   Chunk size : %08x\n", VC_CMA_CHUNK_SIZE);
++	seq_printf(m, "   Chunks     : %4d (%d bytes)\n",
++		   (int)vc_cma_chunks,
++		   (int)(vc_cma_chunks * VC_CMA_CHUNK_SIZE));
++	seq_printf(m, "   Used       : %4d (%d bytes)\n",
++		   (int)vc_cma_chunks_used,
++		   (int)(vc_cma_chunks_used * VC_CMA_CHUNK_SIZE));
++	seq_printf(m, "   Reserved   : %4d (%d bytes)\n",
++		   (unsigned int)vc_cma_chunks_reserved,
++		   (int)(vc_cma_chunks_reserved * VC_CMA_CHUNK_SIZE));
++
++	for (i = 0; i < vc_cma_reserve_count; i++) {
++		struct vc_cma_reserve_user *user = &vc_cma_reserve_users[i];
++		seq_printf(m, "     PID %5d: %d bytes\n", user->pid,
++			   user->reserve);
++	}
++
++	seq_printf(m, "\n");
++
++	return 0;
++}
++
++static int vc_cma_proc_open(struct inode *inode, struct file *file)
++{
++	return single_open(file, vc_cma_show_info, NULL);
++}
++
++/****************************************************************************
++*
++*   vc_cma_proc_write
++*
++***************************************************************************/
++
++static int vc_cma_proc_write(struct file *file,
++			     const char __user *buffer,
++			     size_t size, loff_t *ppos)
++{
++	int rc = -EFAULT;
++	char input_str[20];
++
++	memset(input_str, 0, sizeof(input_str));
++
++	if (size > sizeof(input_str)) {
++		LOG_ERR("%s: input string length too long", __func__);
++		goto out;
++	}
++
++	if (copy_from_user(input_str, buffer, size - 1)) {
++		LOG_ERR("%s: failed to get input string", __func__);
++		goto out;
++	}
++#define ALLOC_STR "alloc"
++#define FREE_STR "free"
++#define DEBUG_STR "debug"
++#define RESERVE_STR "reserve"
++	if (strncmp(input_str, ALLOC_STR, strlen(ALLOC_STR)) == 0) {
++		int size;
++		char *p = input_str + strlen(ALLOC_STR);
++
++		while (*p == ' ')
++			p++;
++		size = memparse(p, NULL);
++		LOG_ERR("/proc/vc-cma: alloc %d", size);
++		if (size)
++			send_vc_msg(VC_CMA_MSG_REQUEST_FREE,
++				    size / VC_CMA_CHUNK_SIZE, 0);
++		else
++			LOG_ERR("invalid size '%s'", p);
++		rc = size;
++	} else if (strncmp(input_str, FREE_STR, strlen(FREE_STR)) == 0) {
++		int size;
++		char *p = input_str + strlen(FREE_STR);
++
++		while (*p == ' ')
++			p++;
++		size = memparse(p, NULL);
++		LOG_ERR("/proc/vc-cma: free %d", size);
++		if (size)
++			send_vc_msg(VC_CMA_MSG_REQUEST_ALLOC,
++				    size / VC_CMA_CHUNK_SIZE, 0);
++		else
++			LOG_ERR("invalid size '%s'", p);
++		rc = size;
++	} else if (strncmp(input_str, DEBUG_STR, strlen(DEBUG_STR)) == 0) {
++		char *p = input_str + strlen(DEBUG_STR);
++		while (*p == ' ')
++			p++;
++		if ((strcmp(p, "on") == 0) || (strcmp(p, "1") == 0))
++			vc_cma_debug = 1;
++		else if ((strcmp(p, "off") == 0) || (strcmp(p, "0") == 0))
++			vc_cma_debug = 0;
++		LOG_ERR("/proc/vc-cma: debug %s", vc_cma_debug ? "on" : "off");
++		rc = size;
++	} else if (strncmp(input_str, RESERVE_STR, strlen(RESERVE_STR)) == 0) {
++		int size;
++		int reserved;
++		char *p = input_str + strlen(RESERVE_STR);
++		while (*p == ' ')
++			p++;
++		size = memparse(p, NULL);
++
++		reserved = vc_cma_set_reserve(size, current->tgid);
++		rc = (reserved >= 0) ? size : reserved;
++	}
++
++out:
++	return rc;
++}
++
++/****************************************************************************
++*
++*   File Operations for /proc interface.
++*
++***************************************************************************/
++
++static const struct file_operations vc_cma_proc_fops = {
++	.open = vc_cma_proc_open,
++	.read = seq_read,
++	.write = vc_cma_proc_write,
++	.llseek = seq_lseek,
++	.release = single_release
++};
++
++static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid)
++{
++	struct vc_cma_reserve_user *user = NULL;
++	int delta = 0;
++	int i;
++
++	if (down_interruptible(&vc_cma_reserve_mutex))
++		return -ERESTARTSYS;
++
++	for (i = 0; i < vc_cma_reserve_count; i++) {
++		if (pid == vc_cma_reserve_users[i].pid) {
++			user = &vc_cma_reserve_users[i];
++			delta = reserve - user->reserve;
++			if (reserve)
++				user->reserve = reserve;
++			else {
++				/* Remove this entry by copying downwards */
++				while ((i + 1) < vc_cma_reserve_count) {
++					user[0].pid = user[1].pid;
++					user[0].reserve = user[1].reserve;
++					user++;
++					i++;
++				}
++				vc_cma_reserve_count--;
++				user = NULL;
++			}
++			break;
++		}
++	}
++
++	if (reserve && !user) {
++		if (vc_cma_reserve_count == VC_CMA_RESERVE_COUNT_MAX) {
++			LOG_ERR("vc-cma: Too many reservations - "
++				"increase CMA_RESERVE_COUNT_MAX");
++			up(&vc_cma_reserve_mutex);
++			return -EBUSY;
++		}
++		user = &vc_cma_reserve_users[vc_cma_reserve_count];
++		user->pid = pid;
++		user->reserve = reserve;
++		delta = reserve;
++		vc_cma_reserve_count++;
++	}
++
++	vc_cma_reserve_total += delta;
++
++	send_vc_msg(VC_CMA_MSG_RESERVE,
++		    vc_cma_reserve_total & 0xffff, vc_cma_reserve_total >> 16);
++
++	send_worker_msg((VCHIQ_HEADER_T *) VC_CMA_MSG_UPDATE_RESERVE);
++
++	LOG_DBG("/proc/vc-cma: reserve %d (PID %d) - total %u",
++		reserve, pid, vc_cma_reserve_total);
++
++	up(&vc_cma_reserve_mutex);
++
++	return vc_cma_reserve_total;
++}
++
++static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason,
++					   VCHIQ_HEADER_T * header,
++					   VCHIQ_SERVICE_HANDLE_T service,
++					   void *bulk_userdata)
++{
++	switch (reason) {
++	case VCHIQ_MESSAGE_AVAILABLE:
++		if (!send_worker_msg(header))
++			return VCHIQ_RETRY;
++		break;
++	case VCHIQ_SERVICE_CLOSED:
++		LOG_DBG("CMA service closed");
++		break;
++	default:
++		LOG_ERR("Unexpected CMA callback reason %d", reason);
++		break;
++	}
++	return VCHIQ_SUCCESS;
++}
++
++static void send_vc_msg(unsigned short type,
++			unsigned short param1, unsigned short param2)
++{
++	unsigned short msg[] = { type, param1, param2 };
++	VCHIQ_ELEMENT_T elem = { &msg, sizeof(msg) };
++	VCHIQ_STATUS_T ret;
++	vchiq_use_service(cma_service);
++	ret = vchiq_queue_message(cma_service, &elem, 1);
++	vchiq_release_service(cma_service);
++	if (ret != VCHIQ_SUCCESS)
++		LOG_ERR("vchiq_queue_message returned %x", ret);
++}
++
++static bool send_worker_msg(VCHIQ_HEADER_T * msg)
++{
++	if (down_interruptible(&vc_cma_worker_queue_push_mutex))
++		return false;
++	vchiu_queue_push(&cma_msg_queue, msg);
++	up(&vc_cma_worker_queue_push_mutex);
++	return true;
++}
++
++static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply)
++{
++	int i;
++	for (i = 0; i < num_chunks; i++) {
++		struct page *chunk;
++		unsigned int chunk_num;
++		uint8_t *chunk_addr;
++		size_t chunk_size = PAGES_PER_CHUNK << PAGE_SHIFT;
++
++		chunk = dma_alloc_from_contiguous(NULL /*&vc_cma_device.dev*/,
++						  PAGES_PER_CHUNK,
++						  VC_CMA_CHUNK_ORDER);
++		if (!chunk)
++			break;
++
++		chunk_addr = page_address(chunk);
++		dmac_flush_range(chunk_addr, chunk_addr + chunk_size);
++		outer_inv_range(__pa(chunk_addr), __pa(chunk_addr) +
++			chunk_size);
++
++		chunk_num =
++		    (page_to_phys(chunk) - vc_cma_base) / VC_CMA_CHUNK_SIZE;
++		BUG_ON(((page_to_phys(chunk) - vc_cma_base) %
++			VC_CMA_CHUNK_SIZE) != 0);
++		if (chunk_num >= vc_cma_chunks) {
++			LOG_ERR("%s: ===============================",
++				__func__);
++			LOG_ERR("%s: chunk phys %x, vc_cma %x-%x - "
++				"bad SPARSEMEM configuration?",
++				__func__, (unsigned int)page_to_phys(chunk),
++				vc_cma_base, vc_cma_base + vc_cma_size - 1);
++			LOG_ERR("%s: dev->cma_area = %p\n", __func__,
++				vc_cma_device.dev.cma_area);
++			LOG_ERR("%s: ===============================",
++				__func__);
++			break;
++		}
++		reply->params[i] = chunk_num;
++		vc_cma_chunks_used++;
++	}
++
++	if (i < num_chunks) {
++		LOG_ERR("%s: dma_alloc_from_contiguous failed "
++			"for %x bytes (alloc %d of %d, %d free)",
++			__func__, VC_CMA_CHUNK_SIZE, i,
++			num_chunks, vc_cma_chunks - vc_cma_chunks_used);
++		num_chunks = i;
++	}
++
++	LOG_DBG("CMA allocated %d chunks -> %d used",
++		num_chunks, vc_cma_chunks_used);
++	reply->type = VC_CMA_MSG_ALLOCATED;
++
++	{
++		VCHIQ_ELEMENT_T elem = {
++			reply,
++			offsetof(struct cma_msg, params[0]) +
++			    num_chunks * sizeof(reply->params[0])
++		};
++		VCHIQ_STATUS_T ret;
++		vchiq_use_service(cma_service);
++		ret = vchiq_queue_message(cma_service, &elem, 1);
++		vchiq_release_service(cma_service);
++		if (ret != VCHIQ_SUCCESS)
++			LOG_ERR("vchiq_queue_message return " "%x", ret);
++	}
++
++	return num_chunks;
++}
++
++static int cma_worker_proc(void *param)
++{
++	static struct cma_msg reply;
++	(void)param;
++
++	while (1) {
++		VCHIQ_HEADER_T *msg;
++		static struct cma_msg msg_copy;
++		struct cma_msg *cma_msg = &msg_copy;
++		int type, msg_size;
++
++		msg = vchiu_queue_pop(&cma_msg_queue);
++		if ((unsigned int)msg >= VC_CMA_MSG_MAX) {
++			msg_size = msg->size;
++			memcpy(&msg_copy, msg->data, msg_size);
++			type = cma_msg->type;
++			vchiq_release_message(cma_service, msg);
++		} else {
++			msg_size = 0;
++			type = (int)msg;
++			if (type == VC_CMA_MSG_QUIT)
++				break;
++			else if (type == VC_CMA_MSG_UPDATE_RESERVE) {
++				msg = NULL;
++				cma_msg = NULL;
++			} else {
++				BUG();
++				continue;
++			}
++		}
++
++		switch (type) {
++		case VC_CMA_MSG_ALLOC:{
++				int num_chunks, free_chunks;
++				num_chunks = cma_msg->params[0];
++				free_chunks =
++				    vc_cma_chunks - vc_cma_chunks_used;
++				LOG_DBG("CMA_MSG_ALLOC(%d chunks)", num_chunks);
++				if (num_chunks > VC_CMA_MAX_PARAMS_PER_MSG) {
++					LOG_ERR
++					    ("CMA_MSG_ALLOC - chunk count (%d) "
++					     "exceeds VC_CMA_MAX_PARAMS_PER_MSG (%d)",
++					     num_chunks,
++					     VC_CMA_MAX_PARAMS_PER_MSG);
++					num_chunks = VC_CMA_MAX_PARAMS_PER_MSG;
++				}
++
++				if (num_chunks > free_chunks) {
++					LOG_ERR
++					    ("CMA_MSG_ALLOC - chunk count (%d) "
++					     "exceeds free chunks (%d)",
++					     num_chunks, free_chunks);
++					num_chunks = free_chunks;
++				}
++
++				vc_cma_alloc_chunks(num_chunks, &reply);
++			}
++			break;
++
++		case VC_CMA_MSG_FREE:{
++				int chunk_count =
++				    (msg_size -
++				     offsetof(struct cma_msg,
++					      params)) /
++				    sizeof(cma_msg->params[0]);
++				int i;
++				BUG_ON(chunk_count <= 0);
++
++				LOG_DBG("CMA_MSG_FREE(%d chunks - %x, ...)",
++					chunk_count, cma_msg->params[0]);
++				for (i = 0; i < chunk_count; i++) {
++					int chunk_num = cma_msg->params[i];
++					struct page *page = vc_cma_base_page +
++					    chunk_num * PAGES_PER_CHUNK;
++					if (chunk_num >= vc_cma_chunks) {
++						LOG_ERR
++						    ("CMA_MSG_FREE - chunk %d of %d"
++						     " (value %x) exceeds maximum "
++						     "(%x)", i, chunk_count,
++						     chunk_num,
++						     vc_cma_chunks - 1);
++						break;
++					}
++
++					if (!dma_release_from_contiguous
++					    (NULL /*&vc_cma_device.dev*/, page,
++					     PAGES_PER_CHUNK)) {
++						LOG_ERR
++						    ("CMA_MSG_FREE - failed to "
++						     "release chunk %d (phys %x, "
++						     "page %x)", chunk_num,
++						     page_to_phys(page),
++						     (unsigned int)page);
++					}
++					vc_cma_chunks_used--;
++				}
++				LOG_DBG("CMA released %d chunks -> %d used",
++					i, vc_cma_chunks_used);
++			}
++			break;
++
++		case VC_CMA_MSG_UPDATE_RESERVE:{
++				int chunks_needed =
++				    ((vc_cma_reserve_total + VC_CMA_CHUNK_SIZE -
++				      1)
++				     / VC_CMA_CHUNK_SIZE) -
++				    vc_cma_chunks_reserved;
++
++				LOG_DBG
++				    ("CMA_MSG_UPDATE_RESERVE(%d chunks needed)",
++				     chunks_needed);
++
++				/* Cap the reservations to what is available */
++				if (chunks_needed > 0) {
++					if (chunks_needed >
++					    (vc_cma_chunks -
++					     vc_cma_chunks_used))
++						chunks_needed =
++						    (vc_cma_chunks -
++						     vc_cma_chunks_used);
++
++					chunks_needed =
++					    vc_cma_alloc_chunks(chunks_needed,
++								&reply);
++				}
++
++				LOG_DBG
++				    ("CMA_MSG_UPDATE_RESERVE(%d chunks allocated)",
++				     chunks_needed);
++				vc_cma_chunks_reserved += chunks_needed;
++			}
++			break;
++
++		default:
++			LOG_ERR("unexpected msg type %d", type);
++			break;
++		}
++	}
++
++	LOG_DBG("quitting...");
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_cma_connected_init
++*
++*   This function is called once the videocore has been connected.
++*
++***************************************************************************/
++
++static void vc_cma_connected_init(void)
++{
++	VCHIQ_SERVICE_PARAMS_T service_params;
++
++	LOG_DBG("vc_cma_connected_init");
++
++	if (!vchiu_queue_init(&cma_msg_queue, 16)) {
++		LOG_ERR("could not create CMA msg queue");
++		goto fail_queue;
++	}
++
++	if (vchiq_initialise(&cma_instance) != VCHIQ_SUCCESS)
++		goto fail_vchiq_init;
++
++	vchiq_connect(cma_instance);
++
++	service_params.fourcc = VC_CMA_FOURCC;
++	service_params.callback = cma_service_callback;
++	service_params.userdata = NULL;
++	service_params.version = VC_CMA_VERSION;
++	service_params.version_min = VC_CMA_VERSION;
++
++	if (vchiq_open_service(cma_instance, &service_params,
++			       &cma_service) != VCHIQ_SUCCESS) {
++		LOG_ERR("failed to open service - already in use?");
++		goto fail_vchiq_open;
++	}
++
++	vchiq_release_service(cma_service);
++
++	cma_worker = kthread_create(cma_worker_proc, NULL, "cma_worker");
++	if (!cma_worker) {
++		LOG_ERR("could not create CMA worker thread");
++		goto fail_worker;
++	}
++	set_user_nice(cma_worker, -20);
++	wake_up_process(cma_worker);
++
++	return;
++
++fail_worker:
++	vchiq_close_service(cma_service);
++fail_vchiq_open:
++	vchiq_shutdown(cma_instance);
++fail_vchiq_init:
++	vchiu_queue_delete(&cma_msg_queue);
++fail_queue:
++	return;
++}
++
++void
++loud_error_header(void)
++{
++	if (in_loud_error)
++		return;
++
++	LOG_ERR("============================================================"
++		"================");
++	LOG_ERR("============================================================"
++		"================");
++	LOG_ERR("=====");
++
++	in_loud_error = 1;
++}
++
++void
++loud_error_footer(void)
++{
++	if (!in_loud_error)
++		return;
++
++	LOG_ERR("=====");
++	LOG_ERR("============================================================"
++		"================");
++	LOG_ERR("============================================================"
++		"================");
++
++	in_loud_error = 0;
++}
++
++#if 1
++static int check_cma_config(void) { return 1; }
++#else
++static int
++read_vc_debug_var(VC_MEM_ACCESS_HANDLE_T handle,
++	const char *symbol,
++	void *buf, size_t bufsize)
++{
++	VC_MEM_ADDR_T vcMemAddr;
++	size_t vcMemSize;
++	uint8_t *mapAddr;
++	off_t  vcMapAddr;
++
++	if (!LookupVideoCoreSymbol(handle, symbol,
++		&vcMemAddr,
++		&vcMemSize)) {
++		loud_error_header();
++		loud_error(
++			"failed to find VC symbol \"%s\".",
++			symbol);
++		loud_error_footer();
++		return 0;
++	}
++
++	if (vcMemSize != bufsize) {
++		loud_error_header();
++		loud_error(
++			"VC symbol \"%s\" is the wrong size.",
++			symbol);
++		loud_error_footer();
++		return 0;
++	}
++
++	vcMapAddr = (off_t)vcMemAddr & VC_MEM_TO_ARM_ADDR_MASK;
++	vcMapAddr += mm_vc_mem_phys_addr;
++	mapAddr = ioremap_nocache(vcMapAddr, vcMemSize);
++	if (mapAddr == 0) {
++		loud_error_header();
++		loud_error(
++			"failed to ioremap \"%s\" @ 0x%x "
++			"(phys: 0x%x, size: %u).",
++			symbol,
++			(unsigned int)vcMapAddr,
++			(unsigned int)vcMemAddr,
++			(unsigned int)vcMemSize);
++		loud_error_footer();
++		return 0;
++	}
++
++	memcpy(buf, mapAddr, bufsize);
++	iounmap(mapAddr);
++
++	return 1;
++}
++
++
++static int
++check_cma_config(void)
++{
++	VC_MEM_ACCESS_HANDLE_T mem_hndl;
++	VC_MEM_ADDR_T mempool_start;
++	VC_MEM_ADDR_T mempool_end;
++	VC_MEM_ADDR_T mempool_offline_start;
++	VC_MEM_ADDR_T mempool_offline_end;
++	VC_MEM_ADDR_T cam_alloc_base;
++	VC_MEM_ADDR_T cam_alloc_size;
++	VC_MEM_ADDR_T cam_alloc_end;
++	int success = 0;
++
++	if (OpenVideoCoreMemory(&mem_hndl) != 0)
++		goto out;
++
++	/* Read the relevant VideoCore variables */
++	if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_START",
++		&mempool_start,
++		sizeof(mempool_start)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_END",
++		&mempool_end,
++		sizeof(mempool_end)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_START",
++		&mempool_offline_start,
++		sizeof(mempool_offline_start)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_END",
++		&mempool_offline_end,
++		sizeof(mempool_offline_end)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "cam_alloc_base",
++		&cam_alloc_base,
++		sizeof(cam_alloc_base)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "cam_alloc_size",
++		&cam_alloc_size,
++		sizeof(cam_alloc_size)))
++		goto close;
++
++	cam_alloc_end = cam_alloc_base + cam_alloc_size;
++
++	success = 1;
++
++	/* Now the sanity checks */
++	if (!mempool_offline_start)
++		mempool_offline_start = mempool_start;
++	if (!mempool_offline_end)
++		mempool_offline_end = mempool_end;
++
++	if (VCADDR_TO_PHYSADDR(mempool_offline_start) != vc_cma_base) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_START(%x -> %lx) doesn't match "
++			"vc_cma_base(%x)",
++			mempool_offline_start,
++			VCADDR_TO_PHYSADDR(mempool_offline_start),
++			vc_cma_base);
++		success = 0;
++	}
++
++	if (VCADDR_TO_PHYSADDR(mempool_offline_end) !=
++		(vc_cma_base + vc_cma_size)) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_END(%x -> %lx) doesn't match "
++			"vc_cma_base(%x) + vc_cma_size(%x) = %x",
++			mempool_offline_start,
++			VCADDR_TO_PHYSADDR(mempool_offline_end),
++			vc_cma_base, vc_cma_size, vc_cma_base + vc_cma_size);
++		success = 0;
++	}
++
++	if (mempool_end < mempool_start) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_END(%x) must not be before "
++			"__MEMPOOL_START(%x)",
++			mempool_end,
++			mempool_start);
++		success = 0;
++	}
++
++	if (mempool_offline_end < mempool_offline_start) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_END(%x) must not be before "
++			"__MEMPOOL_OFFLINE_START(%x)",
++			mempool_offline_end,
++			mempool_offline_start);
++		success = 0;
++	}
++
++	if (mempool_offline_start < mempool_start) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_START(%x) must not be before "
++			"__MEMPOOL_START(%x)",
++			mempool_offline_start,
++			mempool_start);
++		success = 0;
++	}
++
++	if (mempool_offline_end > mempool_end) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_END(%x) must not be after "
++			"__MEMPOOL_END(%x)",
++			mempool_offline_end,
++			mempool_end);
++		success = 0;
++	}
++
++	if ((cam_alloc_base < mempool_end) &&
++		(cam_alloc_end > mempool_start)) {
++		loud_error_header();
++		loud_error(
++			"cam_alloc pool(%x-%x) overlaps "
++			"mempool(%x-%x)",
++			cam_alloc_base, cam_alloc_end,
++			mempool_start, mempool_end);
++		success = 0;
++	}
++
++	loud_error_footer();
++
++close:
++	CloseVideoCoreMemory(mem_hndl);
++
++out:
++	return success;
++}
++#endif
++
++static int vc_cma_init(void)
++{
++	int rc = -EFAULT;
++	struct device *dev;
++
++	if (!check_cma_config())
++		goto out_release;
++
++	printk(KERN_INFO "vc-cma: Videocore CMA driver\n");
++	printk(KERN_INFO "vc-cma: vc_cma_base      = 0x%08x\n", vc_cma_base);
++	printk(KERN_INFO "vc-cma: vc_cma_size      = 0x%08x (%u MiB)\n",
++	       vc_cma_size, vc_cma_size / (1024 * 1024));
++	printk(KERN_INFO "vc-cma: vc_cma_initial   = 0x%08x (%u MiB)\n",
++	       vc_cma_initial, vc_cma_initial / (1024 * 1024));
++
++	vc_cma_base_page = phys_to_page(vc_cma_base);
++
++	if (vc_cma_chunks) {
++		int chunks_needed = vc_cma_initial / VC_CMA_CHUNK_SIZE;
++
++		for (vc_cma_chunks_used = 0;
++		     vc_cma_chunks_used < chunks_needed; vc_cma_chunks_used++) {
++			struct page *chunk;
++			chunk = dma_alloc_from_contiguous(NULL /*&vc_cma_device.dev*/,
++							  PAGES_PER_CHUNK,
++							  VC_CMA_CHUNK_ORDER);
++			if (!chunk)
++				break;
++			BUG_ON(((page_to_phys(chunk) - vc_cma_base) %
++				VC_CMA_CHUNK_SIZE) != 0);
++		}
++		if (vc_cma_chunks_used != chunks_needed) {
++			LOG_ERR("%s: dma_alloc_from_contiguous failed (%d "
++				"bytes, allocation %d of %d)",
++				__func__, VC_CMA_CHUNK_SIZE,
++				vc_cma_chunks_used, chunks_needed);
++			goto out_release;
++		}
++
++		vchiq_add_connected_callback(vc_cma_connected_init);
++	}
++
++	rc = alloc_chrdev_region(&vc_cma_devnum, 0, 1, DRIVER_NAME);
++	if (rc < 0) {
++		LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc);
++		goto out_release;
++	}
++
++	cdev_init(&vc_cma_cdev, &vc_cma_fops);
++	rc = cdev_add(&vc_cma_cdev, vc_cma_devnum, 1);
++	if (rc != 0) {
++		LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc);
++		goto out_unregister;
++	}
++
++	vc_cma_class = class_create(THIS_MODULE, DRIVER_NAME);
++	if (IS_ERR(vc_cma_class)) {
++		rc = PTR_ERR(vc_cma_class);
++		LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc);
++		goto out_cdev_del;
++	}
++
++	dev = device_create(vc_cma_class, NULL, vc_cma_devnum, NULL,
++			    DRIVER_NAME);
++	if (IS_ERR(dev)) {
++		rc = PTR_ERR(dev);
++		LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc);
++		goto out_class_destroy;
++	}
++
++	vc_cma_proc_entry = create_proc_entry(DRIVER_NAME, 0444, NULL);
++	if (vc_cma_proc_entry == NULL) {
++		rc = -EFAULT;
++		LOG_ERR("%s: create_proc_entry failed", __func__);
++		goto out_device_destroy;
++	}
++
++	vc_cma_proc_entry->proc_fops = &vc_cma_proc_fops;
++
++	vc_cma_inited = 1;
++	return 0;
++
++out_device_destroy:
++	device_destroy(vc_cma_class, vc_cma_devnum);
++
++out_class_destroy:
++	class_destroy(vc_cma_class);
++	vc_cma_class = NULL;
++
++out_cdev_del:
++	cdev_del(&vc_cma_cdev);
++
++out_unregister:
++	unregister_chrdev_region(vc_cma_devnum, 1);
++
++out_release:
++	/* It is tempting to try to clean up by calling
++	   dma_release_from_contiguous for all allocated chunks, but it isn't
++	   a very safe thing to do. If vc_cma_initial is non-zero it is because
++	   VideoCore is already using that memory, so giving it back to Linux
++	   is likely to be fatal.
++	 */
++	return -1;
++}
++
++/****************************************************************************
++*
++*   vc_cma_exit
++*
++***************************************************************************/
++
++static void __exit vc_cma_exit(void)
++{
++	LOG_DBG("%s: called", __func__);
++
++	if (vc_cma_inited) {
++		remove_proc_entry(vc_cma_proc_entry->name, NULL);
++		device_destroy(vc_cma_class, vc_cma_devnum);
++		class_destroy(vc_cma_class);
++		cdev_del(&vc_cma_cdev);
++		unregister_chrdev_region(vc_cma_devnum, 1);
++	}
++}
++
++module_init(vc_cma_init);
++module_exit(vc_cma_exit);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Broadcom Corporation");
+--- linux-3.10/drivers/char/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/char/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -62,3 +62,6 @@
+ js-rtc-y = rtc.o
+ 
+ obj-$(CONFIG_TILE_SROM)		+= tile-srom.o
++
++obj-$(CONFIG_BRCM_CHAR_DRIVERS) += broadcom/
++
+--- linux-3.10/drivers/char/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/char/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -586,6 +586,8 @@
+ 
+ source "drivers/s390/char/Kconfig"
+ 
++source "drivers/char/broadcom/Kconfig"
++
+ config MSM_SMD_PKT
+ 	bool "Enable device interface for some SMD packet ports"
+ 	default n
+diff -urN linux-3.10/drivers/misc/Kconfig linux-rpi-3.10.y/drivers/misc/Kconfig
+--- linux-3.10/drivers/misc/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -536,4 +536,6 @@
+ source "drivers/misc/altera-stapl/Kconfig"
+ source "drivers/misc/mei/Kconfig"
+ source "drivers/misc/vmw_vmci/Kconfig"
++source "drivers/misc/vc04_services/Kconfig"
+ endmenu
++
+diff -urN linux-3.10/drivers/misc/Makefile linux-rpi-3.10.y/drivers/misc/Makefile
+--- linux-3.10/drivers/misc/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -53,3 +53,4 @@
+ obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
+ obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
+ obj-$(CONFIG_SRAM)		+= sram.o
++obj-$(CONFIG_BCM2708_VCHIQ)	+= vc04_services/
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/connections/connection.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/connections/connection.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchi/connections/connection.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/connections/connection.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,328 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef CONNECTION_H_
++#define CONNECTION_H_
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/semaphore.h>
++
++#include "interface/vchi/vchi_cfg_internal.h"
++#include "interface/vchi/vchi_common.h"
++#include "interface/vchi/message_drivers/message.h"
++
++/******************************************************************************
++ Global defs
++ *****************************************************************************/
++
++// Opaque handle for a connection / service pair
++typedef struct opaque_vchi_connection_connected_service_handle_t *VCHI_CONNECTION_SERVICE_HANDLE_T;
++
++// opaque handle to the connection state information
++typedef struct opaque_vchi_connection_info_t VCHI_CONNECTION_STATE_T;
++
++typedef struct vchi_connection_t VCHI_CONNECTION_T;
++
++
++/******************************************************************************
++ API
++ *****************************************************************************/
++
++// Routine to init a connection with a particular low level driver
++typedef VCHI_CONNECTION_STATE_T * (*VCHI_CONNECTION_INIT_T)( struct vchi_connection_t * connection,
++                                                             const VCHI_MESSAGE_DRIVER_T * driver );
++
++// Routine to control CRC enabling at a connection level
++typedef int32_t (*VCHI_CONNECTION_CRC_CONTROL_T)( VCHI_CONNECTION_STATE_T *state_handle,
++                                                  VCHI_CRC_CONTROL_T control );
++
++// Routine to create a service
++typedef int32_t (*VCHI_CONNECTION_SERVICE_CONNECT_T)( VCHI_CONNECTION_STATE_T *state_handle,
++                                                      int32_t service_id,
++                                                      uint32_t rx_fifo_size,
++                                                      uint32_t tx_fifo_size,
++                                                      int server,
++                                                      VCHI_CALLBACK_T callback,
++                                                      void *callback_param,
++                                                      int32_t want_crc,
++                                                      int32_t want_unaligned_bulk_rx,
++                                                      int32_t want_unaligned_bulk_tx,
++                                                      VCHI_CONNECTION_SERVICE_HANDLE_T *service_handle );
++
++// Routine to close a service
++typedef int32_t (*VCHI_CONNECTION_SERVICE_DISCONNECT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle );
++
++// Routine to queue a message
++typedef int32_t (*VCHI_CONNECTION_SERVICE_QUEUE_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                            const void *data,
++                                                            uint32_t data_size,
++                                                            VCHI_FLAGS_T flags,
++                                                            void *msg_handle );
++
++// scatter-gather (vector) message queueing
++typedef int32_t (*VCHI_CONNECTION_SERVICE_QUEUE_MESSAGEV_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                             VCHI_MSG_VECTOR_T *vector,
++                                                             uint32_t count,
++                                                             VCHI_FLAGS_T flags,
++                                                             void *msg_handle );
++
++// Routine to dequeue a message
++typedef int32_t (*VCHI_CONNECTION_SERVICE_DEQUEUE_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                              void *data,
++                                                              uint32_t max_data_size_to_read,
++                                                              uint32_t *actual_msg_size,
++                                                              VCHI_FLAGS_T flags );
++
++// Routine to peek at a message
++typedef int32_t (*VCHI_CONNECTION_SERVICE_PEEK_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                           void **data,
++                                                           uint32_t *msg_size,
++                                                           VCHI_FLAGS_T flags );
++
++// Routine to hold a message
++typedef int32_t (*VCHI_CONNECTION_SERVICE_HOLD_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                           void **data,
++                                                           uint32_t *msg_size,
++                                                           VCHI_FLAGS_T flags,
++                                                           void **message_handle );
++
++// Routine to initialise a received message iterator
++typedef int32_t (*VCHI_CONNECTION_SERVICE_LOOKAHEAD_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                                VCHI_MSG_ITER_T *iter,
++                                                                VCHI_FLAGS_T flags );
++
++// Routine to release a held message
++typedef int32_t (*VCHI_CONNECTION_HELD_MSG_RELEASE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                       void *message_handle );
++
++// Routine to get info on a held message
++typedef int32_t (*VCHI_CONNECTION_HELD_MSG_INFO_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                    void *message_handle,
++                                                    void **data,
++                                                    int32_t *msg_size,
++                                                    uint32_t *tx_timestamp,
++                                                    uint32_t *rx_timestamp );
++
++// Routine to check whether the iterator has a next message
++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_HAS_NEXT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service,
++                                                       const VCHI_MSG_ITER_T *iter );
++
++// Routine to advance the iterator
++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_NEXT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service,
++                                                    VCHI_MSG_ITER_T *iter,
++                                                    void **data,
++                                                    uint32_t *msg_size );
++
++// Routine to remove the last message returned by the iterator
++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_REMOVE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service,
++                                                      VCHI_MSG_ITER_T *iter );
++
++// Routine to hold the last message returned by the iterator
++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_HOLD_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service,
++                                                    VCHI_MSG_ITER_T *iter,
++                                                    void **msg_handle );
++
++// Routine to transmit bulk data
++typedef int32_t (*VCHI_CONNECTION_BULK_QUEUE_TRANSMIT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                          const void *data_src,
++                                                          uint32_t data_size,
++                                                          VCHI_FLAGS_T flags,
++                                                          void *bulk_handle );
++
++// Routine to receive data
++typedef int32_t (*VCHI_CONNECTION_BULK_QUEUE_RECEIVE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                         void *data_dst,
++                                                         uint32_t data_size,
++                                                         VCHI_FLAGS_T flags,
++                                                         void *bulk_handle );
++
++// Routine to report if a server is available
++typedef int32_t (*VCHI_CONNECTION_SERVER_PRESENT)( VCHI_CONNECTION_STATE_T *state, int32_t service_id, int32_t peer_flags );
++
++// Routine to report the number of RX slots available
++typedef int (*VCHI_CONNECTION_RX_SLOTS_AVAILABLE)( const VCHI_CONNECTION_STATE_T *state );
++
++// Routine to report the RX slot size
++typedef uint32_t (*VCHI_CONNECTION_RX_SLOT_SIZE)( const VCHI_CONNECTION_STATE_T *state );
++
++// Callback to indicate that the other side has added a buffer to the rx bulk DMA FIFO
++typedef void (*VCHI_CONNECTION_RX_BULK_BUFFER_ADDED)(VCHI_CONNECTION_STATE_T *state,
++                                                     int32_t service,
++                                                     uint32_t length,
++                                                     MESSAGE_TX_CHANNEL_T channel,
++                                                     uint32_t channel_params,
++                                                     uint32_t data_length,
++                                                     uint32_t data_offset);
++
++// Callback to inform a service that a Xon or Xoff message has been received
++typedef void (*VCHI_CONNECTION_FLOW_CONTROL)(VCHI_CONNECTION_STATE_T *state, int32_t service_id, int32_t xoff);
++
++// Callback to inform a service that a server available reply message has been received
++typedef void (*VCHI_CONNECTION_SERVER_AVAILABLE_REPLY)(VCHI_CONNECTION_STATE_T *state, int32_t service_id, uint32_t flags);
++
++// Callback to indicate that bulk auxiliary messages have arrived
++typedef void (*VCHI_CONNECTION_BULK_AUX_RECEIVED)(VCHI_CONNECTION_STATE_T *state);
++
++// Callback to indicate that bulk auxiliary messages have arrived
++typedef void (*VCHI_CONNECTION_BULK_AUX_TRANSMITTED)(VCHI_CONNECTION_STATE_T *state, void *handle);
++
++// Callback with all the connection info you require
++typedef void (*VCHI_CONNECTION_INFO)(VCHI_CONNECTION_STATE_T *state, uint32_t protocol_version, uint32_t slot_size, uint32_t num_slots, uint32_t min_bulk_size);
++
++// Callback to inform of a disconnect
++typedef void (*VCHI_CONNECTION_DISCONNECT)(VCHI_CONNECTION_STATE_T *state, uint32_t flags);
++
++// Callback to inform of a power control request
++typedef void (*VCHI_CONNECTION_POWER_CONTROL)(VCHI_CONNECTION_STATE_T *state, MESSAGE_TX_CHANNEL_T channel, int32_t enable);
++
++// allocate memory suitably aligned for this connection
++typedef void * (*VCHI_BUFFER_ALLOCATE)(VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, uint32_t * length);
++
++// free memory allocated by buffer_allocate
++typedef void   (*VCHI_BUFFER_FREE)(VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, void * address);
++
++
++/******************************************************************************
++ System driver struct
++ *****************************************************************************/
++
++struct opaque_vchi_connection_api_t
++{
++   // Routine to init the connection
++   VCHI_CONNECTION_INIT_T                      init;
++
++   // Connection-level CRC control
++   VCHI_CONNECTION_CRC_CONTROL_T               crc_control;
++
++   // Routine to connect to or create service
++   VCHI_CONNECTION_SERVICE_CONNECT_T           service_connect;
++
++   // Routine to disconnect from a service
++   VCHI_CONNECTION_SERVICE_DISCONNECT_T        service_disconnect;
++
++   // Routine to queue a message
++   VCHI_CONNECTION_SERVICE_QUEUE_MESSAGE_T     service_queue_msg;
++
++   // scatter-gather (vector) message queue
++   VCHI_CONNECTION_SERVICE_QUEUE_MESSAGEV_T    service_queue_msgv;
++
++   // Routine to dequeue a message
++   VCHI_CONNECTION_SERVICE_DEQUEUE_MESSAGE_T   service_dequeue_msg;
++
++   // Routine to peek at a message
++   VCHI_CONNECTION_SERVICE_PEEK_MESSAGE_T      service_peek_msg;
++
++   // Routine to hold a message
++   VCHI_CONNECTION_SERVICE_HOLD_MESSAGE_T      service_hold_msg;
++
++   // Routine to initialise a received message iterator
++   VCHI_CONNECTION_SERVICE_LOOKAHEAD_MESSAGE_T service_look_ahead_msg;
++
++   // Routine to release a message
++   VCHI_CONNECTION_HELD_MSG_RELEASE_T          held_msg_release;
++
++   // Routine to get information on a held message
++   VCHI_CONNECTION_HELD_MSG_INFO_T             held_msg_info;
++
++   // Routine to check for next message on iterator
++   VCHI_CONNECTION_MSG_ITER_HAS_NEXT_T         msg_iter_has_next;
++
++   // Routine to get next message on iterator
++   VCHI_CONNECTION_MSG_ITER_NEXT_T             msg_iter_next;
++
++   // Routine to remove the last message returned by iterator
++   VCHI_CONNECTION_MSG_ITER_REMOVE_T           msg_iter_remove;
++
++   // Routine to hold the last message returned by iterator
++   VCHI_CONNECTION_MSG_ITER_HOLD_T             msg_iter_hold;
++
++   // Routine to transmit bulk data
++   VCHI_CONNECTION_BULK_QUEUE_TRANSMIT_T       bulk_queue_transmit;
++
++   // Routine to receive data
++   VCHI_CONNECTION_BULK_QUEUE_RECEIVE_T        bulk_queue_receive;
++
++   // Routine to report the available servers
++   VCHI_CONNECTION_SERVER_PRESENT              server_present;
++
++   // Routine to report the number of RX slots available
++   VCHI_CONNECTION_RX_SLOTS_AVAILABLE          connection_rx_slots_available;
++
++   // Routine to report the RX slot size
++   VCHI_CONNECTION_RX_SLOT_SIZE                connection_rx_slot_size;
++
++   // Callback to indicate that the other side has added a buffer to the rx bulk DMA FIFO
++   VCHI_CONNECTION_RX_BULK_BUFFER_ADDED        rx_bulk_buffer_added;
++
++   // Callback to inform a service that a Xon or Xoff message has been received
++   VCHI_CONNECTION_FLOW_CONTROL                flow_control;
++
++   // Callback to inform a service that a server available reply message has been received
++   VCHI_CONNECTION_SERVER_AVAILABLE_REPLY      server_available_reply;
++
++   // Callback to indicate that bulk auxiliary messages have arrived
++   VCHI_CONNECTION_BULK_AUX_RECEIVED           bulk_aux_received;
++
++   // Callback to indicate that a bulk auxiliary message has been transmitted
++   VCHI_CONNECTION_BULK_AUX_TRANSMITTED        bulk_aux_transmitted;
++
++   // Callback to provide information about the connection
++   VCHI_CONNECTION_INFO                        connection_info;
++
++   // Callback to notify that peer has requested disconnect
++   VCHI_CONNECTION_DISCONNECT                  disconnect;
++
++   // Callback to notify that peer has requested power change
++   VCHI_CONNECTION_POWER_CONTROL               power_control;
++
++   // allocate memory suitably aligned for this connection
++   VCHI_BUFFER_ALLOCATE                        buffer_allocate;
++
++   // free memory allocated by buffer_allocate
++   VCHI_BUFFER_FREE                            buffer_free;
++
++};
++
++struct vchi_connection_t {
++   const VCHI_CONNECTION_API_T *api;
++   VCHI_CONNECTION_STATE_T     *state;
++#ifdef VCHI_COARSE_LOCKING
++   struct semaphore             sem;
++#endif
++};
++
++
++#endif /* CONNECTION_H_ */
++
++/****************************** End of file **********************************/
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,204 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef _VCHI_MESSAGE_H_
++#define _VCHI_MESSAGE_H_
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/semaphore.h>
++
++#include "interface/vchi/vchi_cfg_internal.h"
++#include "interface/vchi/vchi_common.h"
++
++
++typedef enum message_event_type {
++   MESSAGE_EVENT_NONE,
++   MESSAGE_EVENT_NOP,
++   MESSAGE_EVENT_MESSAGE,
++   MESSAGE_EVENT_SLOT_COMPLETE,
++   MESSAGE_EVENT_RX_BULK_PAUSED,
++   MESSAGE_EVENT_RX_BULK_COMPLETE,
++   MESSAGE_EVENT_TX_COMPLETE,
++   MESSAGE_EVENT_MSG_DISCARDED
++} MESSAGE_EVENT_TYPE_T;
++
++typedef enum vchi_msg_flags
++{
++   VCHI_MSG_FLAGS_NONE                  = 0x0,
++   VCHI_MSG_FLAGS_TERMINATE_DMA         = 0x1
++} VCHI_MSG_FLAGS_T;
++
++typedef enum message_tx_channel
++{
++   MESSAGE_TX_CHANNEL_MESSAGE           = 0,
++   MESSAGE_TX_CHANNEL_BULK              = 1 // drivers may provide multiple bulk channels, from 1 upwards
++} MESSAGE_TX_CHANNEL_T;
++
++// Macros used for cycling through bulk channels
++#define MESSAGE_TX_CHANNEL_BULK_PREV(c) (MESSAGE_TX_CHANNEL_BULK+((c)-MESSAGE_TX_CHANNEL_BULK+VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION-1)%VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION)
++#define MESSAGE_TX_CHANNEL_BULK_NEXT(c) (MESSAGE_TX_CHANNEL_BULK+((c)-MESSAGE_TX_CHANNEL_BULK+1)%VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION)
++
++typedef enum message_rx_channel
++{
++   MESSAGE_RX_CHANNEL_MESSAGE           = 0,
++   MESSAGE_RX_CHANNEL_BULK              = 1 // drivers may provide multiple bulk channels, from 1 upwards
++} MESSAGE_RX_CHANNEL_T;
++
++// Message receive slot information
++typedef struct rx_msg_slot_info {
++
++   struct rx_msg_slot_info *next;
++   //struct slot_info *prev;
++#if !defined VCHI_COARSE_LOCKING
++   struct semaphore   sem;
++#endif
++
++   uint8_t           *addr;               // base address of slot
++   uint32_t           len;                // length of slot in bytes
++
++   uint32_t           write_ptr;          // hardware causes this to advance
++   uint32_t           read_ptr;           // this module does the reading
++   int                active;             // is this slot in the hardware dma fifo?
++   uint32_t           msgs_parsed;        // count how many messages are in this slot
++   uint32_t           msgs_released;      // how many messages have been released
++   void              *state;              // connection state information
++   uint8_t            ref_count[VCHI_MAX_SERVICES_PER_CONNECTION];          // reference count for slots held by services
++} RX_MSG_SLOTINFO_T;
++
++// The message driver no longer needs to know about the fields of RX_BULK_SLOTINFO_T - sort this out.
++// In particular, it mustn't use addr and len - they're the client buffer, but the message
++// driver will be tasked with sending the aligned core section.
++typedef struct rx_bulk_slotinfo_t {
++   struct rx_bulk_slotinfo_t *next;
++
++   struct semaphore *blocking;
++
++   // needed by DMA
++   void        *addr;
++   uint32_t     len;
++
++   // needed for the callback
++   void        *service;
++   void        *handle;
++   VCHI_FLAGS_T flags;
++} RX_BULK_SLOTINFO_T;
++
++
++/* ----------------------------------------------------------------------
++ * each connection driver will have a pool of the following struct.
++ *
++ * the pool will be managed by vchi_qman_*
++ * this means there will be multiple queues (single linked lists)
++ * a given struct message_info will be on exactly one of these queues
++ * at any one time
++ * -------------------------------------------------------------------- */
++typedef struct rx_message_info {
++
++   struct message_info *next;
++   //struct message_info *prev;
++
++   uint8_t    *addr;
++   uint32_t   len;
++   RX_MSG_SLOTINFO_T *slot; // points to whichever slot contains this message
++   uint32_t   tx_timestamp;
++   uint32_t   rx_timestamp;
++
++} RX_MESSAGE_INFO_T;
++
++typedef struct {
++   MESSAGE_EVENT_TYPE_T type;
++
++   struct {
++      // for messages
++      void    *addr;           // address of message
++      uint16_t slot_delta;     // whether this message indicated slot delta
++      uint32_t len;            // length of message
++      RX_MSG_SLOTINFO_T *slot; // slot this message is in
++      int32_t  service;   // service id this message is destined for
++      uint32_t tx_timestamp;   // timestamp from the header
++      uint32_t rx_timestamp;   // timestamp when we parsed it
++   } message;
++
++   // FIXME: cleanup slot reporting...
++   RX_MSG_SLOTINFO_T *rx_msg;
++   RX_BULK_SLOTINFO_T *rx_bulk;
++   void *tx_handle;
++   MESSAGE_TX_CHANNEL_T tx_channel;
++
++} MESSAGE_EVENT_T;
++
++
++// callbacks
++typedef void VCHI_MESSAGE_DRIVER_EVENT_CALLBACK_T( void *state );
++
++typedef struct {
++   VCHI_MESSAGE_DRIVER_EVENT_CALLBACK_T *event_callback;
++} VCHI_MESSAGE_DRIVER_OPEN_T;
++
++
++// handle to this instance of message driver (as returned by ->open)
++typedef struct opaque_mhandle_t *VCHI_MDRIVER_HANDLE_T;
++
++struct opaque_vchi_message_driver_t {
++   VCHI_MDRIVER_HANDLE_T *(*open)( VCHI_MESSAGE_DRIVER_OPEN_T *params, void *state );
++   int32_t (*suspending)( VCHI_MDRIVER_HANDLE_T *handle );
++   int32_t (*resumed)( VCHI_MDRIVER_HANDLE_T *handle );
++   int32_t (*power_control)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T, int32_t enable );
++   int32_t (*add_msg_rx_slot)( VCHI_MDRIVER_HANDLE_T *handle, RX_MSG_SLOTINFO_T *slot );      // rx message
++   int32_t (*add_bulk_rx)( VCHI_MDRIVER_HANDLE_T *handle, void *data, uint32_t len, RX_BULK_SLOTINFO_T *slot );  // rx data (bulk)
++   int32_t (*send)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel, const void *data, uint32_t len, VCHI_MSG_FLAGS_T flags, void *send_handle );      // tx (message & bulk)
++   void    (*next_event)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_EVENT_T *event );     // get the next event from message_driver
++   int32_t (*enable)( VCHI_MDRIVER_HANDLE_T *handle );
++   int32_t (*form_message)( VCHI_MDRIVER_HANDLE_T *handle, int32_t service_id, VCHI_MSG_VECTOR_T *vector, uint32_t count, void
++                            *address, uint32_t length_avail, uint32_t max_total_length, int32_t pad_to_fill, int32_t allow_partial );
++
++   int32_t (*update_message)( VCHI_MDRIVER_HANDLE_T *handle, void *dest, int16_t *slot_count );
++   int32_t (*buffer_aligned)( VCHI_MDRIVER_HANDLE_T *handle, int tx, int uncached, const void *address, const uint32_t length );
++   void *  (*allocate_buffer)( VCHI_MDRIVER_HANDLE_T *handle, uint32_t *length );
++   void    (*free_buffer)( VCHI_MDRIVER_HANDLE_T *handle, void *address );
++   int     (*rx_slot_size)( VCHI_MDRIVER_HANDLE_T *handle, int msg_size );
++   int     (*tx_slot_size)( VCHI_MDRIVER_HANDLE_T *handle, int msg_size );
++
++   int32_t  (*tx_supports_terminate)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel );
++   uint32_t (*tx_bulk_chunk_size)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel );
++   int     (*tx_alignment)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel );
++   int     (*rx_alignment)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_RX_CHANNEL_T channel );
++   void    (*form_bulk_aux)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel, const void *data, uint32_t len, uint32_t chunk_size, const void **aux_data, int32_t *aux_len );
++   void    (*debug)( VCHI_MDRIVER_HANDLE_T *handle );
++};
++
++
++#endif // _VCHI_MESSAGE_H_
++
++/****************************** End of file ***********************************/
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,224 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_CFG_H_
++#define VCHI_CFG_H_
++
++/****************************************************************************************
++ * Defines in this first section are part of the VCHI API and may be examined by VCHI
++ * services.
++ ***************************************************************************************/
++
++/* Required alignment of base addresses for bulk transfer, if unaligned transfers are not enabled */
++/* Really determined by the message driver, and should be available from a run-time call. */
++#ifndef VCHI_BULK_ALIGN
++#   if __VCCOREVER__ >= 0x04000000
++#       define VCHI_BULK_ALIGN 32 // Allows for the need to do cache cleans
++#   else
++#       define VCHI_BULK_ALIGN 16
++#   endif
++#endif
++
++/* Required length multiple for bulk transfers, if unaligned transfers are not enabled */
++/* May be less than or greater than VCHI_BULK_ALIGN */
++/* Really determined by the message driver, and should be available from a run-time call. */
++#ifndef VCHI_BULK_GRANULARITY
++#   if __VCCOREVER__ >= 0x04000000
++#       define VCHI_BULK_GRANULARITY 32 // Allows for the need to do cache cleans
++#   else
++#       define VCHI_BULK_GRANULARITY 16
++#   endif
++#endif
++
++/* The largest possible message to be queued with vchi_msg_queue. */
++#ifndef VCHI_MAX_MSG_SIZE
++#   if defined VCHI_LOCAL_HOST_PORT
++#       define VCHI_MAX_MSG_SIZE     16384         // makes file transfers fast, but should they be using bulk?
++#   else
++#       define VCHI_MAX_MSG_SIZE      4096 // NOTE: THIS MUST BE LARGER THAN OR EQUAL TO THE SIZE OF THE KHRONOS MERGE BUFFER!!
++#   endif
++#endif
++
++/******************************************************************************************
++ * Defines below are system configuration options, and should not be used by VCHI services.
++ *****************************************************************************************/
++
++/* How many connections can we support? A localhost implementation uses 2 connections,
++ * 1 for host-app, 1 for VMCS, and these are hooked together by a loopback MPHI VCFW
++ * driver. */
++#ifndef VCHI_MAX_NUM_CONNECTIONS
++#   define VCHI_MAX_NUM_CONNECTIONS 3
++#endif
++
++/* How many services can we open per connection? Extending this doesn't cost processing time, just a small
++ * amount of static memory. */
++#ifndef VCHI_MAX_SERVICES_PER_CONNECTION
++#  define VCHI_MAX_SERVICES_PER_CONNECTION 36
++#endif
++
++/* Adjust if using a message driver that supports more logical TX channels */
++#ifndef VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION
++#   define VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION 9 // 1 MPHI + 8 CCP2 logical channels
++#endif
++
++/* Adjust if using a message driver that supports more logical RX channels */
++#ifndef VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION
++#   define VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION 1 // 1 MPHI
++#endif
++
++/* How many receive slots do we use. This times VCHI_MAX_MSG_SIZE gives the effective
++ * receive queue space, less message headers. */
++#ifndef VCHI_NUM_READ_SLOTS
++#  if defined(VCHI_LOCAL_HOST_PORT)
++#     define VCHI_NUM_READ_SLOTS 4
++#  else
++#     define VCHI_NUM_READ_SLOTS 48
++#  endif
++#endif
++
++/* Do we utilise overrun facility for receive message slots? Can aid peer transmit
++ * performance. Only define on VideoCore end, talking to host.
++ */
++//#define VCHI_MSG_RX_OVERRUN
++
++/* How many transmit slots do we use. Generally don't need many, as the hardware driver
++ * underneath VCHI will usually have its own buffering. */
++#ifndef VCHI_NUM_WRITE_SLOTS
++#  define VCHI_NUM_WRITE_SLOTS 4
++#endif
++
++/* If a service has held or queued received messages in VCHI_XOFF_THRESHOLD or more slots,
++ * then it's taking up too much buffer space, and the peer service will be told to stop
++ * transmitting with an XOFF message. For this to be effective, the VCHI_NUM_READ_SLOTS
++ * needs to be considerably bigger than VCHI_NUM_WRITE_SLOTS, or the transmit latency
++ * is too high. */
++#ifndef VCHI_XOFF_THRESHOLD
++#  define VCHI_XOFF_THRESHOLD (VCHI_NUM_READ_SLOTS / 2)
++#endif
++
++/* After we've sent an XOFF, the peer will be told to resume transmission once the local
++ * service has dequeued/released enough messages that it's now occupying
++ * VCHI_XON_THRESHOLD slots or fewer. */
++#ifndef VCHI_XON_THRESHOLD
++#  define VCHI_XON_THRESHOLD (VCHI_NUM_READ_SLOTS / 4)
++#endif
++
++/* A size below which a bulk transfer omits the handshake completely and always goes
++ * via the message channel, if bulk auxiliary is being sent on that service. (The user
++ * can guarantee this by enabling unaligned transmits).
++ * Not API. */
++#ifndef VCHI_MIN_BULK_SIZE
++#  define VCHI_MIN_BULK_SIZE    ( VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096 )
++#endif
++
++/* Maximum size of bulk transmission chunks, for each interface type. A trade-off between
++ * speed and latency; the smaller the chunk size the better change of messages and other
++ * bulk transmissions getting in when big bulk transfers are happening. Set to 0 to not
++ * break transmissions into chunks.
++ */
++#ifndef VCHI_MAX_BULK_CHUNK_SIZE_MPHI
++#  define VCHI_MAX_BULK_CHUNK_SIZE_MPHI (16 * 1024)
++#endif
++
++/* NB Chunked CCP2 transmissions violate the letter of the CCP2 spec by using "JPEG8" mode
++ * with multiple-line frames. Only use if the receiver can cope. */
++#ifndef VCHI_MAX_BULK_CHUNK_SIZE_CCP2
++#  define VCHI_MAX_BULK_CHUNK_SIZE_CCP2 0
++#endif
++
++/* How many TX messages can we have pending in our transmit slots. Once exhausted,
++ * vchi_msg_queue will be blocked. */
++#ifndef VCHI_TX_MSG_QUEUE_SIZE
++#  define VCHI_TX_MSG_QUEUE_SIZE           256
++#endif
++
++/* How many RX messages can we have parsed in the receive slots. Once exhausted, parsing
++ * will be suspended until older messages are dequeued/released. */
++#ifndef VCHI_RX_MSG_QUEUE_SIZE
++#  define VCHI_RX_MSG_QUEUE_SIZE           256
++#endif
++
++/* Really should be able to cope if we run out of received message descriptors, by
++ * suspending parsing as the comment above says, but we don't. This sweeps the issue
++ * under the carpet. */
++#if VCHI_RX_MSG_QUEUE_SIZE < (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS
++#  undef VCHI_RX_MSG_QUEUE_SIZE
++#  define VCHI_RX_MSG_QUEUE_SIZE (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS
++#endif
++
++/* How many bulk transmits can we have pending. Once exhausted, vchi_bulk_queue_transmit
++ * will be blocked. */
++#ifndef VCHI_TX_BULK_QUEUE_SIZE
++#  define VCHI_TX_BULK_QUEUE_SIZE           64
++#endif
++
++/* How many bulk receives can we have pending. Once exhausted, vchi_bulk_queue_receive
++ * will be blocked. */
++#ifndef VCHI_RX_BULK_QUEUE_SIZE
++#  define VCHI_RX_BULK_QUEUE_SIZE           64
++#endif
++
++/* A limit on how many outstanding bulk requests we expect the peer to give us. If
++ * the peer asks for more than this, VCHI will fail and assert. The number is determined
++ * by the peer's hardware - it's the number of outstanding requests that can be queued
++ * on all bulk channels. VC3's MPHI peripheral allows 16. */
++#ifndef VCHI_MAX_PEER_BULK_REQUESTS
++#  define VCHI_MAX_PEER_BULK_REQUESTS       32
++#endif
++
++/* Define VCHI_CCP2TX_MANUAL_POWER if the host tells us when to turn the CCP2
++ * transmitter on and off.
++ */
++/*#define VCHI_CCP2TX_MANUAL_POWER*/
++
++#ifndef VCHI_CCP2TX_MANUAL_POWER
++
++/* Timeout (in milliseconds) for putting the CCP2TX interface into IDLE state. Set
++ * negative for no IDLE.
++ */
++#  ifndef VCHI_CCP2TX_IDLE_TIMEOUT
++#    define VCHI_CCP2TX_IDLE_TIMEOUT        5
++#  endif
++
++/* Timeout (in milliseconds) for putting the CCP2TX interface into OFF state. Set
++ * negative for no OFF.
++ */
++#  ifndef VCHI_CCP2TX_OFF_TIMEOUT
++#    define VCHI_CCP2TX_OFF_TIMEOUT         1000
++#  endif
++
++#endif /* VCHI_CCP2TX_MANUAL_POWER */
++
++#endif /* VCHI_CFG_H_ */
++
++/****************************** End of file **********************************/
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,71 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_CFG_INTERNAL_H_
++#define VCHI_CFG_INTERNAL_H_
++
++/****************************************************************************************
++ * Control optimisation attempts.
++ ***************************************************************************************/
++
++// Don't use lots of short-term locks - use great long ones, reducing the overall locks-per-second
++#define VCHI_COARSE_LOCKING
++
++// Avoid lock then unlock on exit from blocking queue operations (msg tx, bulk rx/tx)
++// (only relevant if VCHI_COARSE_LOCKING)
++#define VCHI_ELIDE_BLOCK_EXIT_LOCK
++
++// Avoid lock on non-blocking peek
++// (only relevant if VCHI_COARSE_LOCKING)
++#define VCHI_AVOID_PEEK_LOCK
++
++// Use one slot-handler thread per connection, rather than 1 thread dealing with all connections in rotation.
++#define VCHI_MULTIPLE_HANDLER_THREADS
++
++// Put free descriptors onto the head of the free queue, rather than the tail, so that we don't thrash
++// our way through the pool of descriptors.
++#define VCHI_PUSH_FREE_DESCRIPTORS_ONTO_HEAD
++
++// Don't issue a MSG_AVAILABLE callback for every single message. Possibly only safe if VCHI_COARSE_LOCKING.
++#define VCHI_FEWER_MSG_AVAILABLE_CALLBACKS
++
++// Don't use message descriptors for TX messages that don't need them
++#define VCHI_MINIMISE_TX_MSG_DESCRIPTORS
++
++// Nano-locks for multiqueue
++//#define VCHI_MQUEUE_NANOLOCKS
++
++// Lock-free(er) dequeuing
++//#define VCHI_RX_NANOLOCKS
++
++#endif /*VCHI_CFG_INTERNAL_H_*/
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_common.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_common.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_common.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_common.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,163 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_COMMON_H_
++#define VCHI_COMMON_H_
++
++
++//flags used when sending messages (must be bitmapped)
++typedef enum
++{
++   VCHI_FLAGS_NONE                      = 0x0,
++   VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE   = 0x1,   // waits for message to be received, or sent (NB. not the same as being seen on other side)
++   VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE = 0x2,   // run a callback when message sent
++   VCHI_FLAGS_BLOCK_UNTIL_QUEUED        = 0x4,   // return once the transfer is in a queue ready to go
++   VCHI_FLAGS_ALLOW_PARTIAL             = 0x8,
++   VCHI_FLAGS_BLOCK_UNTIL_DATA_READ     = 0x10,
++   VCHI_FLAGS_CALLBACK_WHEN_DATA_READ   = 0x20,
++
++   VCHI_FLAGS_ALIGN_SLOT            = 0x000080,  // internal use only
++   VCHI_FLAGS_BULK_AUX_QUEUED       = 0x010000,  // internal use only
++   VCHI_FLAGS_BULK_AUX_COMPLETE     = 0x020000,  // internal use only
++   VCHI_FLAGS_BULK_DATA_QUEUED      = 0x040000,  // internal use only
++   VCHI_FLAGS_BULK_DATA_COMPLETE    = 0x080000,  // internal use only
++   VCHI_FLAGS_INTERNAL              = 0xFF0000
++} VCHI_FLAGS_T;
++
++// constants for vchi_crc_control()
++typedef enum {
++   VCHI_CRC_NOTHING = -1,
++   VCHI_CRC_PER_SERVICE = 0,
++   VCHI_CRC_EVERYTHING = 1,
++} VCHI_CRC_CONTROL_T;
++
++//callback reasons when an event occurs on a service
++typedef enum
++{
++   VCHI_CALLBACK_REASON_MIN,
++
++   //This indicates that there is data available
++   //handle is the msg id that was transmitted with the data
++   //    When a message is received and there was no FULL message available previously, send callback
++   //    Tasks get kicked by the callback, reset their event and try and read from the fifo until it fails
++   VCHI_CALLBACK_MSG_AVAILABLE,
++   VCHI_CALLBACK_MSG_SENT,
++   VCHI_CALLBACK_MSG_SPACE_AVAILABLE, // XXX not yet implemented
++
++   // This indicates that a transfer from the other side has completed
++   VCHI_CALLBACK_BULK_RECEIVED,
++   //This indicates that data queued up to be sent has now gone
++   //handle is the msg id that was used when sending the data
++   VCHI_CALLBACK_BULK_SENT,
++   VCHI_CALLBACK_BULK_RX_SPACE_AVAILABLE, // XXX not yet implemented
++   VCHI_CALLBACK_BULK_TX_SPACE_AVAILABLE, // XXX not yet implemented
++
++   VCHI_CALLBACK_SERVICE_CLOSED,
++
++   // this side has sent XOFF to peer due to lack of data consumption by service
++   // (suggests the service may need to take some recovery action if it has
++   // been deliberately holding off consuming data)
++   VCHI_CALLBACK_SENT_XOFF,
++   VCHI_CALLBACK_SENT_XON,
++
++   // indicates that a bulk transfer has finished reading the source buffer
++   VCHI_CALLBACK_BULK_DATA_READ,
++
++   // power notification events (currently host side only)
++   VCHI_CALLBACK_PEER_OFF,
++   VCHI_CALLBACK_PEER_SUSPENDED,
++   VCHI_CALLBACK_PEER_ON,
++   VCHI_CALLBACK_PEER_RESUMED,
++   VCHI_CALLBACK_FORCED_POWER_OFF,
++
++#ifdef USE_VCHIQ_ARM
++   // some extra notifications provided by vchiq_arm
++   VCHI_CALLBACK_SERVICE_OPENED,
++   VCHI_CALLBACK_BULK_RECEIVE_ABORTED,
++   VCHI_CALLBACK_BULK_TRANSMIT_ABORTED,
++#endif
++
++   VCHI_CALLBACK_REASON_MAX
++} VCHI_CALLBACK_REASON_T;
++
++//Calback used by all services / bulk transfers
++typedef void (*VCHI_CALLBACK_T)( void *callback_param, //my service local param
++                                 VCHI_CALLBACK_REASON_T reason,
++                                 void *handle ); //for transmitting msg's only
++
++
++
++/*
++ * Define vector struct for scatter-gather (vector) operations
++ * Vectors can be nested - if a vector element has negative length, then
++ * the data pointer is treated as pointing to another vector array, with
++ * '-vec_len' elements. Thus to append a header onto an existing vector,
++ * you can do this:
++ *
++ * void foo(const VCHI_MSG_VECTOR_T *v, int n)
++ * {
++ *    VCHI_MSG_VECTOR_T nv[2];
++ *    nv[0].vec_base = my_header;
++ *    nv[0].vec_len = sizeof my_header;
++ *    nv[1].vec_base = v;
++ *    nv[1].vec_len = -n;
++ *    ...
++ *
++ */
++typedef struct vchi_msg_vector {
++   const void *vec_base;
++   int32_t vec_len;
++} VCHI_MSG_VECTOR_T;
++
++// Opaque type for a connection API
++typedef struct opaque_vchi_connection_api_t VCHI_CONNECTION_API_T;
++
++// Opaque type for a message driver
++typedef struct opaque_vchi_message_driver_t VCHI_MESSAGE_DRIVER_T;
++
++
++// Iterator structure for reading ahead through received message queue. Allocated by client,
++// initialised by vchi_msg_look_ahead. Fields are for internal VCHI use only.
++// Iterates over messages in queue at the instant of the call to vchi_msg_lookahead -
++// will not proceed to messages received since. Behaviour is undefined if an iterator
++// is used again after messages for that service are removed/dequeued by any
++// means other than vchi_msg_iter_... calls on the iterator itself.
++typedef struct {
++   struct opaque_vchi_service_t *service;
++   void *last;
++   void *next;
++   void *remove;
++} VCHI_MSG_ITER_T;
++
++
++#endif // VCHI_COMMON_H_
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,373 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_H_
++#define VCHI_H_
++
++#include "interface/vchi/vchi_cfg.h"
++#include "interface/vchi/vchi_common.h"
++#include "interface/vchi/connections/connection.h"
++#include "vchi_mh.h"
++
++
++/******************************************************************************
++ Global defs
++ *****************************************************************************/
++
++#define VCHI_BULK_ROUND_UP(x)     ((((unsigned long)(x))+VCHI_BULK_ALIGN-1) & ~(VCHI_BULK_ALIGN-1))
++#define VCHI_BULK_ROUND_DOWN(x)   (((unsigned long)(x)) & ~(VCHI_BULK_ALIGN-1))
++#define VCHI_BULK_ALIGN_NBYTES(x) (VCHI_BULK_ALIGNED(x) ? 0 : (VCHI_BULK_ALIGN - ((unsigned long)(x) & (VCHI_BULK_ALIGN-1))))
++
++#ifdef USE_VCHIQ_ARM
++#define VCHI_BULK_ALIGNED(x)      1
++#else
++#define VCHI_BULK_ALIGNED(x)      (((unsigned long)(x) & (VCHI_BULK_ALIGN-1)) == 0)
++#endif
++
++struct vchi_version {
++	uint32_t version;
++	uint32_t version_min;
++};
++#define VCHI_VERSION(v_) { v_, v_ }
++#define VCHI_VERSION_EX(v_, m_) { v_, m_ }
++
++typedef enum
++{
++   VCHI_VEC_POINTER,
++   VCHI_VEC_HANDLE,
++   VCHI_VEC_LIST
++} VCHI_MSG_VECTOR_TYPE_T;
++
++typedef struct vchi_msg_vector_ex {
++
++   VCHI_MSG_VECTOR_TYPE_T type;
++   union
++   {
++      // a memory handle
++      struct
++      {
++         VCHI_MEM_HANDLE_T handle;
++         uint32_t offset;
++         int32_t vec_len;
++      } handle;
++
++      // an ordinary data pointer
++      struct
++      {
++         const void *vec_base;
++         int32_t vec_len;
++      } ptr;
++
++      // a nested vector list
++      struct
++      {
++         struct vchi_msg_vector_ex *vec;
++         uint32_t vec_len;
++      } list;
++   } u;
++} VCHI_MSG_VECTOR_EX_T;
++
++
++// Construct an entry in a msg vector for a pointer (p) of length (l)
++#define VCHI_VEC_POINTER(p,l)  VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } }
++
++// Construct an entry in a msg vector for a message handle (h), starting at offset (o) of length (l)
++#define VCHI_VEC_HANDLE(h,o,l) VCHI_VEC_HANDLE,  { { (h), (o), (l) } }
++
++// Macros to manipulate 'FOURCC' values
++#define MAKE_FOURCC(x) ((int32_t)( (x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3] ))
++#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF,(x >> 16) & 0xFF,(x >> 8) & 0xFF, x & 0xFF
++
++
++// Opaque service information
++struct opaque_vchi_service_t;
++
++// Descriptor for a held message. Allocated by client, initialised by vchi_msg_hold,
++// vchi_msg_iter_hold or vchi_msg_iter_hold_next. Fields are for internal VCHI use only.
++typedef struct
++{
++   struct opaque_vchi_service_t *service;
++   void *message;
++} VCHI_HELD_MSG_T;
++
++
++
++// structure used to provide the information needed to open a server or a client
++typedef struct {
++	struct vchi_version version;
++	int32_t service_id;
++	VCHI_CONNECTION_T *connection;
++	uint32_t rx_fifo_size;
++	uint32_t tx_fifo_size;
++	VCHI_CALLBACK_T callback;
++	void *callback_param;
++	/* client intends to receive bulk transfers of
++		odd lengths or into unaligned buffers */
++	int32_t want_unaligned_bulk_rx;
++	/* client intends to transmit bulk transfers of
++		odd lengths or out of unaligned buffers */
++	int32_t want_unaligned_bulk_tx;
++	/* client wants to check CRCs on (bulk) xfers.
++		Only needs to be set at 1 end - will do both directions. */
++	int32_t want_crc;
++} SERVICE_CREATION_T;
++
++// Opaque handle for a VCHI instance
++typedef struct opaque_vchi_instance_handle_t *VCHI_INSTANCE_T;
++
++// Opaque handle for a server or client
++typedef struct opaque_vchi_service_handle_t *VCHI_SERVICE_HANDLE_T;
++
++// Service registration & startup
++typedef void (*VCHI_SERVICE_INIT)(VCHI_INSTANCE_T initialise_instance, VCHI_CONNECTION_T **connections, uint32_t num_connections);
++
++typedef struct service_info_tag {
++   const char * const vll_filename; /* VLL to load to start this service. This is an empty string if VLL is "static" */
++   VCHI_SERVICE_INIT init;          /* Service initialisation function */
++   void *vll_handle;                /* VLL handle; NULL when unloaded or a "static VLL" in build */
++} SERVICE_INFO_T;
++
++/******************************************************************************
++ Global funcs - implementation is specific to which side you are on (local / remote)
++ *****************************************************************************/
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection( const VCHI_CONNECTION_API_T * function_table,
++                                                   const VCHI_MESSAGE_DRIVER_T * low_level);
++
++
++// Routine used to initialise the vchi on both local + remote connections
++extern int32_t vchi_initialise( VCHI_INSTANCE_T *instance_handle );
++
++extern int32_t vchi_exit( void );
++
++extern int32_t vchi_connect( VCHI_CONNECTION_T **connections,
++                             const uint32_t num_connections,
++                             VCHI_INSTANCE_T instance_handle );
++
++//When this is called, ensure that all services have no data pending.
++//Bulk transfers can remain 'queued'
++extern int32_t vchi_disconnect( VCHI_INSTANCE_T instance_handle );
++
++// Global control over bulk CRC checking
++extern int32_t vchi_crc_control( VCHI_CONNECTION_T *connection,
++                                 VCHI_CRC_CONTROL_T control );
++
++// helper functions
++extern void * vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
++extern void vchi_free_buffer(VCHI_SERVICE_HANDLE_T handle, void *address);
++extern uint32_t vchi_current_time(VCHI_INSTANCE_T instance_handle);
++
++
++/******************************************************************************
++ Global service API
++ *****************************************************************************/
++// Routine to create a named service
++extern int32_t vchi_service_create( VCHI_INSTANCE_T instance_handle,
++                                    SERVICE_CREATION_T *setup,
++                                    VCHI_SERVICE_HANDLE_T *handle );
++
++// Routine to destory a service
++extern int32_t vchi_service_destroy( const VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to open a named service
++extern int32_t vchi_service_open( VCHI_INSTANCE_T instance_handle,
++                                  SERVICE_CREATION_T *setup,
++                                  VCHI_SERVICE_HANDLE_T *handle);
++
++extern int32_t vchi_get_peer_version( const VCHI_SERVICE_HANDLE_T handle,
++                                      short *peer_version );
++
++// Routine to close a named service
++extern int32_t vchi_service_close( const VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to increment ref count on a named service
++extern int32_t vchi_service_use( const VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to decrement ref count on a named service
++extern int32_t vchi_service_release( const VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to send a message accross a service
++extern int32_t vchi_msg_queue( VCHI_SERVICE_HANDLE_T handle,
++                               const void *data,
++                               uint32_t data_size,
++                               VCHI_FLAGS_T flags,
++                               void *msg_handle );
++
++// scatter-gather (vector) and send message
++int32_t vchi_msg_queuev_ex( VCHI_SERVICE_HANDLE_T handle,
++                            VCHI_MSG_VECTOR_EX_T *vector,
++                            uint32_t count,
++                            VCHI_FLAGS_T flags,
++                            void *msg_handle );
++
++// legacy scatter-gather (vector) and send message, only handles pointers
++int32_t vchi_msg_queuev( VCHI_SERVICE_HANDLE_T handle,
++                         VCHI_MSG_VECTOR_T *vector,
++                         uint32_t count,
++                         VCHI_FLAGS_T flags,
++                         void *msg_handle );
++
++// Routine to receive a msg from a service
++// Dequeue is equivalent to hold, copy into client buffer, release
++extern int32_t vchi_msg_dequeue( VCHI_SERVICE_HANDLE_T handle,
++                                 void *data,
++                                 uint32_t max_data_size_to_read,
++                                 uint32_t *actual_msg_size,
++                                 VCHI_FLAGS_T flags );
++
++// Routine to look at a message in place.
++// The message is not dequeued, so a subsequent call to peek or dequeue
++// will return the same message.
++extern int32_t vchi_msg_peek( VCHI_SERVICE_HANDLE_T handle,
++                              void **data,
++                              uint32_t *msg_size,
++                              VCHI_FLAGS_T flags );
++
++// Routine to remove a message after it has been read in place with peek
++// The first message on the queue is dequeued.
++extern int32_t vchi_msg_remove( VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to look at a message in place.
++// The message is dequeued, so the caller is left holding it; the descriptor is
++// filled in and must be released when the user has finished with the message.
++extern int32_t vchi_msg_hold( VCHI_SERVICE_HANDLE_T handle,
++                              void **data,        // } may be NULL, as info can be
++                              uint32_t *msg_size, // } obtained from HELD_MSG_T
++                              VCHI_FLAGS_T flags,
++                              VCHI_HELD_MSG_T *message_descriptor );
++
++// Initialise an iterator to look through messages in place
++extern int32_t vchi_msg_look_ahead( VCHI_SERVICE_HANDLE_T handle,
++                                    VCHI_MSG_ITER_T *iter,
++                                    VCHI_FLAGS_T flags );
++
++/******************************************************************************
++ Global service support API - operations on held messages and message iterators
++ *****************************************************************************/
++
++// Routine to get the address of a held message
++extern void *vchi_held_msg_ptr( const VCHI_HELD_MSG_T *message );
++
++// Routine to get the size of a held message
++extern int32_t vchi_held_msg_size( const VCHI_HELD_MSG_T *message );
++
++// Routine to get the transmit timestamp as written into the header by the peer
++extern uint32_t vchi_held_msg_tx_timestamp( const VCHI_HELD_MSG_T *message );
++
++// Routine to get the reception timestamp, written as we parsed the header
++extern uint32_t vchi_held_msg_rx_timestamp( const VCHI_HELD_MSG_T *message );
++
++// Routine to release a held message after it has been processed
++extern int32_t vchi_held_msg_release( VCHI_HELD_MSG_T *message );
++
++// Indicates whether the iterator has a next message.
++extern int32_t vchi_msg_iter_has_next( const VCHI_MSG_ITER_T *iter );
++
++// Return the pointer and length for the next message and advance the iterator.
++extern int32_t vchi_msg_iter_next( VCHI_MSG_ITER_T *iter,
++                                   void **data,
++                                   uint32_t *msg_size );
++
++// Remove the last message returned by vchi_msg_iter_next.
++// Can only be called once after each call to vchi_msg_iter_next.
++extern int32_t vchi_msg_iter_remove( VCHI_MSG_ITER_T *iter );
++
++// Hold the last message returned by vchi_msg_iter_next.
++// Can only be called once after each call to vchi_msg_iter_next.
++extern int32_t vchi_msg_iter_hold( VCHI_MSG_ITER_T *iter,
++                                   VCHI_HELD_MSG_T *message );
++
++// Return information for the next message, and hold it, advancing the iterator.
++extern int32_t vchi_msg_iter_hold_next( VCHI_MSG_ITER_T *iter,
++                                        void **data,        // } may be NULL
++                                        uint32_t *msg_size, // }
++                                        VCHI_HELD_MSG_T *message );
++
++
++/******************************************************************************
++ Global bulk API
++ *****************************************************************************/
++
++// Routine to prepare interface for a transfer from the other side
++extern int32_t vchi_bulk_queue_receive( VCHI_SERVICE_HANDLE_T handle,
++                                        void *data_dst,
++                                        uint32_t data_size,
++                                        VCHI_FLAGS_T flags,
++                                        void *transfer_handle );
++
++
++// Prepare interface for a transfer from the other side into relocatable memory.
++int32_t vchi_bulk_queue_receive_reloc( const VCHI_SERVICE_HANDLE_T handle,
++                                       VCHI_MEM_HANDLE_T h_dst,
++                                       uint32_t offset,
++                                       uint32_t data_size,
++                                       const VCHI_FLAGS_T flags,
++                                       void * const bulk_handle );
++
++// Routine to queue up data ready for transfer to the other (once they have signalled they are ready)
++extern int32_t vchi_bulk_queue_transmit( VCHI_SERVICE_HANDLE_T handle,
++                                         const void *data_src,
++                                         uint32_t data_size,
++                                         VCHI_FLAGS_T flags,
++                                         void *transfer_handle );
++
++
++/******************************************************************************
++ Configuration plumbing
++ *****************************************************************************/
++
++// function prototypes for the different mid layers (the state info gives the different physical connections)
++extern const VCHI_CONNECTION_API_T *single_get_func_table( void );
++//extern const VCHI_CONNECTION_API_T *local_server_get_func_table( void );
++//extern const VCHI_CONNECTION_API_T *local_client_get_func_table( void );
++
++// declare all message drivers here
++const VCHI_MESSAGE_DRIVER_T *vchi_mphi_message_driver_func_table( void );
++
++#ifdef __cplusplus
++}
++#endif
++
++extern int32_t vchi_bulk_queue_transmit_reloc( VCHI_SERVICE_HANDLE_T handle,
++                                               VCHI_MEM_HANDLE_T h_src,
++                                               uint32_t offset,
++                                               uint32_t data_size,
++                                               VCHI_FLAGS_T flags,
++                                               void *transfer_handle );
++#endif /* VCHI_H_ */
++
++/****************************** End of file **********************************/
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_mh.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_mh.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_mh.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_mh.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,42 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_MH_H_
++#define VCHI_MH_H_
++
++#include <linux/types.h>
++
++typedef int32_t VCHI_MEM_HANDLE_T;
++#define VCHI_MEM_HANDLE_INVALID 0
++
++#endif
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,538 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/pagemap.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++#include <linux/io.h>
++#include <linux/uaccess.h>
++#include <asm/pgtable.h>
++
++#include <mach/irqs.h>
++
++#include <mach/platform.h>
++#include <mach/vcio.h>
++
++#define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32)
++
++#define VCHIQ_DOORBELL_IRQ IRQ_ARM_DOORBELL_0
++#define VCHIQ_ARM_ADDRESS(x) ((void *)__virt_to_bus((unsigned)x))
++
++#include "vchiq_arm.h"
++#include "vchiq_2835.h"
++#include "vchiq_connected.h"
++
++#define MAX_FRAGMENTS (VCHIQ_NUM_CURRENT_BULKS * 2)
++
++typedef struct vchiq_2835_state_struct {
++   int inited;
++   VCHIQ_ARM_STATE_T arm_state;
++} VCHIQ_2835_ARM_STATE_T;
++
++static char *g_slot_mem;
++static int g_slot_mem_size;
++dma_addr_t g_slot_phys;
++static FRAGMENTS_T *g_fragments_base;
++static FRAGMENTS_T *g_free_fragments;
++struct semaphore g_free_fragments_sema;
++
++extern int vchiq_arm_log_level;
++
++static DEFINE_SEMAPHORE(g_free_fragments_mutex);
++
++static irqreturn_t
++vchiq_doorbell_irq(int irq, void *dev_id);
++
++static int
++create_pagelist(char __user *buf, size_t count, unsigned short type,
++                struct task_struct *task, PAGELIST_T ** ppagelist);
++
++static void
++free_pagelist(PAGELIST_T *pagelist, int actual);
++
++int __init
++vchiq_platform_init(VCHIQ_STATE_T *state)
++{
++	VCHIQ_SLOT_ZERO_T *vchiq_slot_zero;
++	int frag_mem_size;
++	int err;
++	int i;
++
++	/* Allocate space for the channels in coherent memory */
++	g_slot_mem_size = PAGE_ALIGN(TOTAL_SLOTS * VCHIQ_SLOT_SIZE);
++	frag_mem_size = PAGE_ALIGN(sizeof(FRAGMENTS_T) * MAX_FRAGMENTS);
++
++	g_slot_mem = dma_alloc_coherent(NULL, g_slot_mem_size + frag_mem_size,
++		&g_slot_phys, GFP_ATOMIC);
++
++	if (!g_slot_mem) {
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unable to allocate channel memory");
++		err = -ENOMEM;
++		goto failed_alloc;
++	}
++
++	WARN_ON(((int)g_slot_mem & (PAGE_SIZE - 1)) != 0);
++
++	vchiq_slot_zero = vchiq_init_slots(g_slot_mem, g_slot_mem_size);
++	if (!vchiq_slot_zero) {
++		err = -EINVAL;
++		goto failed_init_slots;
++	}
++
++	vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX] =
++		(int)g_slot_phys + g_slot_mem_size;
++	vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX] =
++		MAX_FRAGMENTS;
++
++	g_fragments_base = (FRAGMENTS_T *)(g_slot_mem + g_slot_mem_size);
++	g_slot_mem_size += frag_mem_size;
++
++	g_free_fragments = g_fragments_base;
++	for (i = 0; i < (MAX_FRAGMENTS - 1); i++) {
++		*(FRAGMENTS_T **)&g_fragments_base[i] =
++			&g_fragments_base[i + 1];
++	}
++	*(FRAGMENTS_T **)&g_fragments_base[i] = NULL;
++	sema_init(&g_free_fragments_sema, MAX_FRAGMENTS);
++
++	if (vchiq_init_state(state, vchiq_slot_zero, 0/*slave*/) !=
++		VCHIQ_SUCCESS) {
++		err = -EINVAL;
++		goto failed_vchiq_init;
++	}
++
++	err = request_irq(VCHIQ_DOORBELL_IRQ, vchiq_doorbell_irq,
++		IRQF_IRQPOLL, "VCHIQ doorbell",
++		state);
++	if (err < 0) {
++		vchiq_log_error(vchiq_arm_log_level, "%s: failed to register "
++			"irq=%d err=%d", __func__,
++			VCHIQ_DOORBELL_IRQ, err);
++		goto failed_request_irq;
++	}
++
++	/* Send the base address of the slots to VideoCore */
++
++	dsb(); /* Ensure all writes have completed */
++
++	bcm_mailbox_write(MBOX_CHAN_VCHIQ, (unsigned int)g_slot_phys);
++
++	vchiq_log_info(vchiq_arm_log_level,
++		"vchiq_init - done (slots %x, phys %x)",
++		(unsigned int)vchiq_slot_zero, g_slot_phys);
++
++   vchiq_call_connected_callbacks();
++
++   return 0;
++
++failed_request_irq:
++failed_vchiq_init:
++failed_init_slots:
++   dma_free_coherent(NULL, g_slot_mem_size, g_slot_mem, g_slot_phys);
++
++failed_alloc:
++   return err;
++}
++
++void __exit
++vchiq_platform_exit(VCHIQ_STATE_T *state)
++{
++   free_irq(VCHIQ_DOORBELL_IRQ, state);
++   dma_free_coherent(NULL, g_slot_mem_size,
++                     g_slot_mem, g_slot_phys);
++}
++
++
++VCHIQ_STATUS_T
++vchiq_platform_init_state(VCHIQ_STATE_T *state)
++{
++   VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++   state->platform_state = kzalloc(sizeof(VCHIQ_2835_ARM_STATE_T), GFP_KERNEL);
++   ((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->inited = 1;
++   status = vchiq_arm_init_state(state, &((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->arm_state);
++   if(status != VCHIQ_SUCCESS)
++   {
++      ((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->inited = 0;
++   }
++   return status;
++}
++
++VCHIQ_ARM_STATE_T*
++vchiq_platform_get_arm_state(VCHIQ_STATE_T *state)
++{
++   if(!((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->inited)
++   {
++      BUG();
++   }
++   return &((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->arm_state;
++}
++
++void
++remote_event_signal(REMOTE_EVENT_T *event)
++{
++	wmb();
++
++	event->fired = 1;
++
++	dsb();         /* data barrier operation */
++
++	if (event->armed) {
++		/* trigger vc interrupt */
++
++		writel(0, __io_address(ARM_0_BELL2));
++	}
++}
++
++int
++vchiq_copy_from_user(void *dst, const void *src, int size)
++{
++	if ((uint32_t)src < TASK_SIZE) {
++		return copy_from_user(dst, src, size);
++	} else {
++		memcpy(dst, src, size);
++		return 0;
++	}
++}
++
++VCHIQ_STATUS_T
++vchiq_prepare_bulk_data(VCHIQ_BULK_T *bulk, VCHI_MEM_HANDLE_T memhandle,
++	void *offset, int size, int dir)
++{
++	PAGELIST_T *pagelist;
++	int ret;
++
++	WARN_ON(memhandle != VCHI_MEM_HANDLE_INVALID);
++
++	ret = create_pagelist((char __user *)offset, size,
++			(dir == VCHIQ_BULK_RECEIVE)
++			? PAGELIST_READ
++			: PAGELIST_WRITE,
++			current,
++			&pagelist);
++	if (ret != 0)
++		return VCHIQ_ERROR;
++
++	bulk->handle = memhandle;
++	bulk->data = VCHIQ_ARM_ADDRESS(pagelist);
++
++	/* Store the pagelist address in remote_data, which isn't used by the
++	   slave. */
++	bulk->remote_data = pagelist;
++
++	return VCHIQ_SUCCESS;
++}
++
++void
++vchiq_complete_bulk(VCHIQ_BULK_T *bulk)
++{
++	if (bulk && bulk->remote_data && bulk->actual)
++		free_pagelist((PAGELIST_T *)bulk->remote_data, bulk->actual);
++}
++
++void
++vchiq_transfer_bulk(VCHIQ_BULK_T *bulk)
++{
++	/*
++	 * This should only be called on the master (VideoCore) side, but
++	 * provide an implementation to avoid the need for ifdefery.
++	 */
++	BUG();
++}
++
++void
++vchiq_dump_platform_state(void *dump_context)
++{
++	char buf[80];
++	int len;
++	len = snprintf(buf, sizeof(buf),
++		"  Platform: 2835 (VC master)");
++	vchiq_dump(dump_context, buf, len + 1);
++}
++
++VCHIQ_STATUS_T
++vchiq_platform_suspend(VCHIQ_STATE_T *state)
++{
++   return VCHIQ_ERROR;
++}
++
++VCHIQ_STATUS_T
++vchiq_platform_resume(VCHIQ_STATE_T *state)
++{
++   return VCHIQ_SUCCESS;
++}
++
++void
++vchiq_platform_paused(VCHIQ_STATE_T *state)
++{
++}
++
++void
++vchiq_platform_resumed(VCHIQ_STATE_T *state)
++{
++}
++
++int
++vchiq_platform_videocore_wanted(VCHIQ_STATE_T* state)
++{
++   return 1; // autosuspend not supported - videocore always wanted
++}
++
++int
++vchiq_platform_use_suspend_timer(void)
++{
++   return 0;
++}
++void
++vchiq_dump_platform_use_state(VCHIQ_STATE_T *state)
++{
++	vchiq_log_info((vchiq_arm_log_level>=VCHIQ_LOG_INFO),"Suspend timer not in use");
++}
++void
++vchiq_platform_handle_timeout(VCHIQ_STATE_T *state)
++{
++	(void)state;
++}
++/*
++ * Local functions
++ */
++
++static irqreturn_t
++vchiq_doorbell_irq(int irq, void *dev_id)
++{
++	VCHIQ_STATE_T *state = dev_id;
++	irqreturn_t ret = IRQ_NONE;
++	unsigned int status;
++
++	/* Read (and clear) the doorbell */
++	status = readl(__io_address(ARM_0_BELL0));
++
++	if (status & 0x4) {  /* Was the doorbell rung? */
++		remote_event_pollall(state);
++		ret = IRQ_HANDLED;
++	}
++
++	return ret;
++}
++
++/* There is a potential problem with partial cache lines (pages?)
++** at the ends of the block when reading. If the CPU accessed anything in
++** the same line (page?) then it may have pulled old data into the cache,
++** obscuring the new data underneath. We can solve this by transferring the
++** partial cache lines separately, and allowing the ARM to copy into the
++** cached area.
++
++** N.B. This implementation plays slightly fast and loose with the Linux
++** driver programming rules, e.g. its use of __virt_to_bus instead of
++** dma_map_single, but it isn't a multi-platform driver and it benefits
++** from increased speed as a result.
++*/
++
++static int
++create_pagelist(char __user *buf, size_t count, unsigned short type,
++	struct task_struct *task, PAGELIST_T ** ppagelist)
++{
++	PAGELIST_T *pagelist;
++	struct page **pages;
++	struct page *page;
++	unsigned long *addrs;
++	unsigned int num_pages, offset, i;
++	char *addr, *base_addr, *next_addr;
++	int run, addridx, actual_pages;
++
++	offset = (unsigned int)buf & (PAGE_SIZE - 1);
++	num_pages = (count + offset + PAGE_SIZE - 1) / PAGE_SIZE;
++
++	*ppagelist = NULL;
++
++	/* Allocate enough storage to hold the page pointers and the page
++	** list
++	*/
++	pagelist = kmalloc(sizeof(PAGELIST_T) +
++		(num_pages * sizeof(unsigned long)) +
++		(num_pages * sizeof(pages[0])),
++		GFP_KERNEL);
++
++	vchiq_log_trace(vchiq_arm_log_level,
++		"create_pagelist - %x", (unsigned int)pagelist);
++	if (!pagelist)
++		return -ENOMEM;
++
++	addrs = pagelist->addrs;
++	pages = (struct page **)(addrs + num_pages);
++
++	down_read(&task->mm->mmap_sem);
++	actual_pages = get_user_pages(task, task->mm,
++		(unsigned long)buf & ~(PAGE_SIZE - 1), num_pages,
++		(type == PAGELIST_READ) /*Write */ , 0 /*Force */ ,
++		pages, NULL /*vmas */);
++	up_read(&task->mm->mmap_sem);
++
++   if (actual_pages != num_pages)
++   {
++      /* This is probably due to the process being killed */
++      while (actual_pages > 0)
++      {
++         actual_pages--;
++         page_cache_release(pages[actual_pages]);
++      }
++      kfree(pagelist);
++      if (actual_pages == 0)
++         actual_pages = -ENOMEM;
++      return actual_pages;
++   }
++
++	pagelist->length = count;
++	pagelist->type = type;
++	pagelist->offset = offset;
++
++	/* Group the pages into runs of contiguous pages */
++
++	base_addr = VCHIQ_ARM_ADDRESS(page_address(pages[0]));
++	next_addr = base_addr + PAGE_SIZE;
++	addridx = 0;
++	run = 0;
++
++	for (i = 1; i < num_pages; i++) {
++		addr = VCHIQ_ARM_ADDRESS(page_address(pages[i]));
++		if ((addr == next_addr) && (run < (PAGE_SIZE - 1))) {
++			next_addr += PAGE_SIZE;
++			run++;
++		} else {
++			addrs[addridx] = (unsigned long)base_addr + run;
++			addridx++;
++			base_addr = addr;
++			next_addr = addr + PAGE_SIZE;
++			run = 0;
++		}
++	}
++
++	addrs[addridx] = (unsigned long)base_addr + run;
++	addridx++;
++
++	/* Partial cache lines (fragments) require special measures */
++	if ((type == PAGELIST_READ) &&
++		((pagelist->offset & (CACHE_LINE_SIZE - 1)) ||
++		((pagelist->offset + pagelist->length) &
++		(CACHE_LINE_SIZE - 1)))) {
++		FRAGMENTS_T *fragments;
++
++		if (down_interruptible(&g_free_fragments_sema) != 0) {
++			kfree(pagelist);
++			return -EINTR;
++		}
++
++		WARN_ON(g_free_fragments == NULL);
++
++		down(&g_free_fragments_mutex);
++		fragments = (FRAGMENTS_T *) g_free_fragments;
++		WARN_ON(fragments == NULL);
++		g_free_fragments = *(FRAGMENTS_T **) g_free_fragments;
++		up(&g_free_fragments_mutex);
++		pagelist->type =
++			 PAGELIST_READ_WITH_FRAGMENTS + (fragments -
++							 g_fragments_base);
++	}
++
++	for (page = virt_to_page(pagelist);
++		page <= virt_to_page(addrs + num_pages - 1); page++) {
++		flush_dcache_page(page);
++	}
++
++	*ppagelist = pagelist;
++
++	return 0;
++}
++
++static void
++free_pagelist(PAGELIST_T *pagelist, int actual)
++{
++	struct page **pages;
++	unsigned int num_pages, i;
++
++	vchiq_log_trace(vchiq_arm_log_level,
++		"free_pagelist - %x, %d", (unsigned int)pagelist, actual);
++
++	num_pages =
++		(pagelist->length + pagelist->offset + PAGE_SIZE - 1) /
++		PAGE_SIZE;
++
++	pages = (struct page **)(pagelist->addrs + num_pages);
++
++	/* Deal with any partial cache lines (fragments) */
++	if (pagelist->type >= PAGELIST_READ_WITH_FRAGMENTS) {
++		FRAGMENTS_T *fragments = g_fragments_base +
++			(pagelist->type - PAGELIST_READ_WITH_FRAGMENTS);
++		int head_bytes, tail_bytes;
++		head_bytes = (CACHE_LINE_SIZE - pagelist->offset) &
++			(CACHE_LINE_SIZE - 1);
++		tail_bytes = (pagelist->offset + actual) &
++			(CACHE_LINE_SIZE - 1);
++
++		if ((actual >= 0) && (head_bytes != 0)) {
++			if (head_bytes > actual)
++				head_bytes = actual;
++
++			memcpy((char *)page_address(pages[0]) +
++				pagelist->offset,
++				fragments->headbuf,
++				head_bytes);
++		}
++		if ((actual >= 0) && (head_bytes < actual) &&
++			(tail_bytes != 0)) {
++			memcpy((char *)page_address(pages[num_pages - 1]) +
++				((pagelist->offset + actual) &
++				(PAGE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1)),
++				fragments->tailbuf, tail_bytes);
++		}
++
++		down(&g_free_fragments_mutex);
++		*(FRAGMENTS_T **) fragments = g_free_fragments;
++		g_free_fragments = fragments;
++		up(&g_free_fragments_mutex);
++		up(&g_free_fragments_sema);
++	}
++
++	for (i = 0; i < num_pages; i++) {
++		if (pagelist->type != PAGELIST_WRITE)
++			set_page_dirty(pages[i]);
++		page_cache_release(pages[i]);
++	}
++
++	kfree(pagelist);
++}
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,42 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_2835_H
++#define VCHIQ_2835_H
++
++#include "vchiq_pagelist.h"
++
++#define VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX 0
++#define VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX  1
++
++#endif /* VCHIQ_2835_H */
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,2806 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/cdev.h>
++#include <linux/fs.h>
++#include <linux/device.h>
++#include <linux/mm.h>
++#include <linux/highmem.h>
++#include <linux/pagemap.h>
++#include <linux/bug.h>
++#include <linux/semaphore.h>
++#include <linux/list.h>
++#include <linux/proc_fs.h>
++
++#include "vchiq_core.h"
++#include "vchiq_ioctl.h"
++#include "vchiq_arm.h"
++
++#define DEVICE_NAME "vchiq"
++
++/* Override the default prefix, which would be vchiq_arm (from the filename) */
++#undef MODULE_PARAM_PREFIX
++#define MODULE_PARAM_PREFIX DEVICE_NAME "."
++
++#define VCHIQ_MINOR 0
++
++/* Some per-instance constants */
++#define MAX_COMPLETIONS 16
++#define MAX_SERVICES 64
++#define MAX_ELEMENTS 8
++#define MSG_QUEUE_SIZE 64
++
++#define KEEPALIVE_VER 1
++#define KEEPALIVE_VER_MIN KEEPALIVE_VER
++
++/* Run time control of log level, based on KERN_XXX level. */
++int vchiq_arm_log_level = VCHIQ_LOG_DEFAULT;
++int vchiq_susp_log_level = VCHIQ_LOG_ERROR;
++
++#define SUSPEND_TIMER_TIMEOUT_MS 100
++#define SUSPEND_RETRY_TIMER_TIMEOUT_MS 1000
++
++#define VC_SUSPEND_NUM_OFFSET 3 /* number of values before idle which are -ve */
++static const char *const suspend_state_names[] = {
++	"VC_SUSPEND_FORCE_CANCELED",
++	"VC_SUSPEND_REJECTED",
++	"VC_SUSPEND_FAILED",
++	"VC_SUSPEND_IDLE",
++	"VC_SUSPEND_REQUESTED",
++	"VC_SUSPEND_IN_PROGRESS",
++	"VC_SUSPEND_SUSPENDED"
++};
++#define VC_RESUME_NUM_OFFSET 1 /* number of values before idle which are -ve */
++static const char *const resume_state_names[] = {
++	"VC_RESUME_FAILED",
++	"VC_RESUME_IDLE",
++	"VC_RESUME_REQUESTED",
++	"VC_RESUME_IN_PROGRESS",
++	"VC_RESUME_RESUMED"
++};
++/* The number of times we allow force suspend to timeout before actually
++** _forcing_ suspend.  This is to cater for SW which fails to release vchiq
++** correctly - we don't want to prevent ARM suspend indefinitely in this case.
++*/
++#define FORCE_SUSPEND_FAIL_MAX 8
++
++/* The time in ms allowed for videocore to go idle when force suspend has been
++ * requested */
++#define FORCE_SUSPEND_TIMEOUT_MS 200
++
++
++static void suspend_timer_callback(unsigned long context);
++static int vchiq_proc_add_instance(VCHIQ_INSTANCE_T instance);
++static void vchiq_proc_remove_instance(VCHIQ_INSTANCE_T instance);
++
++
++typedef struct user_service_struct {
++	VCHIQ_SERVICE_T *service;
++	void *userdata;
++	VCHIQ_INSTANCE_T instance;
++	int is_vchi;
++	int dequeue_pending;
++	int message_available_pos;
++	int msg_insert;
++	int msg_remove;
++	struct semaphore insert_event;
++	struct semaphore remove_event;
++	VCHIQ_HEADER_T * msg_queue[MSG_QUEUE_SIZE];
++} USER_SERVICE_T;
++
++struct bulk_waiter_node {
++	struct bulk_waiter bulk_waiter;
++	int pid;
++	struct list_head list;
++};
++
++struct vchiq_instance_struct {
++	VCHIQ_STATE_T *state;
++	VCHIQ_COMPLETION_DATA_T completions[MAX_COMPLETIONS];
++	int completion_insert;
++	int completion_remove;
++	struct semaphore insert_event;
++	struct semaphore remove_event;
++	struct mutex completion_mutex;
++
++	int connected;
++	int closing;
++	int pid;
++	int mark;
++
++	struct list_head bulk_waiter_list;
++	struct mutex bulk_waiter_list_mutex;
++
++	struct proc_dir_entry *proc_entry;
++};
++
++typedef struct dump_context_struct {
++	char __user *buf;
++	size_t actual;
++	size_t space;
++	loff_t offset;
++} DUMP_CONTEXT_T;
++
++static struct cdev    vchiq_cdev;
++static dev_t          vchiq_devid;
++static VCHIQ_STATE_T g_state;
++static struct class  *vchiq_class;
++static struct device *vchiq_dev;
++static DEFINE_SPINLOCK(msg_queue_spinlock);
++
++static const char *const ioctl_names[] = {
++	"CONNECT",
++	"SHUTDOWN",
++	"CREATE_SERVICE",
++	"REMOVE_SERVICE",
++	"QUEUE_MESSAGE",
++	"QUEUE_BULK_TRANSMIT",
++	"QUEUE_BULK_RECEIVE",
++	"AWAIT_COMPLETION",
++	"DEQUEUE_MESSAGE",
++	"GET_CLIENT_ID",
++	"GET_CONFIG",
++	"CLOSE_SERVICE",
++	"USE_SERVICE",
++	"RELEASE_SERVICE",
++	"SET_SERVICE_OPTION",
++	"DUMP_PHYS_MEM"
++};
++
++vchiq_static_assert((sizeof(ioctl_names)/sizeof(ioctl_names[0])) ==
++	(VCHIQ_IOC_MAX + 1));
++
++static void
++dump_phys_mem(void *virt_addr, uint32_t num_bytes);
++
++/****************************************************************************
++*
++*   add_completion
++*
++***************************************************************************/
++
++static VCHIQ_STATUS_T
++add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason,
++	VCHIQ_HEADER_T *header, USER_SERVICE_T *user_service,
++	void *bulk_userdata)
++{
++	VCHIQ_COMPLETION_DATA_T *completion;
++	DEBUG_INITIALISE(g_state.local)
++
++	while (instance->completion_insert ==
++		(instance->completion_remove + MAX_COMPLETIONS)) {
++		/* Out of space - wait for the client */
++		DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++		vchiq_log_trace(vchiq_arm_log_level,
++			"add_completion - completion queue full");
++		DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT);
++		if (down_interruptible(&instance->remove_event) != 0) {
++			vchiq_log_info(vchiq_arm_log_level,
++				"service_callback interrupted");
++			return VCHIQ_RETRY;
++		} else if (instance->closing) {
++			vchiq_log_info(vchiq_arm_log_level,
++				"service_callback closing");
++			return VCHIQ_ERROR;
++		}
++		DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++	}
++
++	completion =
++		 &instance->completions[instance->completion_insert &
++		 (MAX_COMPLETIONS - 1)];
++
++	completion->header = header;
++	completion->reason = reason;
++	/* N.B. service_userdata is updated while processing AWAIT_COMPLETION */
++	completion->service_userdata = user_service->service;
++	completion->bulk_userdata = bulk_userdata;
++
++	if (reason == VCHIQ_SERVICE_CLOSED)
++		/* Take an extra reference, to be held until
++		   this CLOSED notification is delivered. */
++		lock_service(user_service->service);
++
++	/* A write barrier is needed here to ensure that the entire completion
++		record is written out before the insert point. */
++	wmb();
++
++	if (reason == VCHIQ_MESSAGE_AVAILABLE)
++		user_service->message_available_pos =
++			instance->completion_insert;
++	instance->completion_insert++;
++
++	up(&instance->insert_event);
++
++	return VCHIQ_SUCCESS;
++}
++
++/****************************************************************************
++*
++*   service_callback
++*
++***************************************************************************/
++
++static VCHIQ_STATUS_T
++service_callback(VCHIQ_REASON_T reason, VCHIQ_HEADER_T *header,
++	VCHIQ_SERVICE_HANDLE_T handle, void *bulk_userdata)
++{
++	/* How do we ensure the callback goes to the right client?
++	** The service_user data points to a USER_SERVICE_T record containing
++	** the original callback and the user state structure, which contains a
++	** circular buffer for completion records.
++	*/
++	USER_SERVICE_T *user_service;
++	VCHIQ_SERVICE_T *service;
++	VCHIQ_INSTANCE_T instance;
++	DEBUG_INITIALISE(g_state.local)
++
++	DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++
++	service = handle_to_service(handle);
++	BUG_ON(!service);
++	user_service = (USER_SERVICE_T *)service->base.userdata;
++	instance = user_service->instance;
++
++	if (!instance || instance->closing)
++		return VCHIQ_SUCCESS;
++
++	vchiq_log_trace(vchiq_arm_log_level,
++		"service_callback - service %lx(%d), reason %d, header %lx, "
++		"instance %lx, bulk_userdata %lx",
++		(unsigned long)user_service,
++		service->localport,
++		reason, (unsigned long)header,
++		(unsigned long)instance, (unsigned long)bulk_userdata);
++
++	if (header && user_service->is_vchi) {
++		spin_lock(&msg_queue_spinlock);
++		while (user_service->msg_insert ==
++			(user_service->msg_remove + MSG_QUEUE_SIZE)) {
++			spin_unlock(&msg_queue_spinlock);
++			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++			DEBUG_COUNT(MSG_QUEUE_FULL_COUNT);
++			vchiq_log_trace(vchiq_arm_log_level,
++				"service_callback - msg queue full");
++			/* If there is no MESSAGE_AVAILABLE in the completion
++			** queue, add one
++			*/
++			if ((user_service->message_available_pos -
++				instance->completion_remove) < 0) {
++				VCHIQ_STATUS_T status;
++				vchiq_log_info(vchiq_arm_log_level,
++					"Inserting extra MESSAGE_AVAILABLE");
++				DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++				status = add_completion(instance, reason,
++					NULL, user_service, bulk_userdata);
++				if (status != VCHIQ_SUCCESS) {
++					DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++					return status;
++				}
++			}
++
++			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++			if (down_interruptible(&user_service->remove_event)
++				!= 0) {
++				vchiq_log_info(vchiq_arm_log_level,
++					"service_callback interrupted");
++				DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++				return VCHIQ_RETRY;
++			} else if (instance->closing) {
++				vchiq_log_info(vchiq_arm_log_level,
++					"service_callback closing");
++				DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++				return VCHIQ_ERROR;
++			}
++			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++			spin_lock(&msg_queue_spinlock);
++		}
++
++		user_service->msg_queue[user_service->msg_insert &
++			(MSG_QUEUE_SIZE - 1)] = header;
++		user_service->msg_insert++;
++		spin_unlock(&msg_queue_spinlock);
++
++		up(&user_service->insert_event);
++
++		/* If there is a thread waiting in DEQUEUE_MESSAGE, or if
++		** there is a MESSAGE_AVAILABLE in the completion queue then
++		** bypass the completion queue.
++		*/
++		if (((user_service->message_available_pos -
++			instance->completion_remove) >= 0) ||
++			user_service->dequeue_pending) {
++			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++			user_service->dequeue_pending = 0;
++			return VCHIQ_SUCCESS;
++		}
++
++		header = NULL;
++	}
++	DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++
++	return add_completion(instance, reason, header, user_service,
++		bulk_userdata);
++}
++
++/****************************************************************************
++*
++*   vchiq_ioctl
++*
++***************************************************************************/
++
++static long
++vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	VCHIQ_INSTANCE_T instance = file->private_data;
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++	VCHIQ_SERVICE_T *service = NULL;
++	long ret = 0;
++	int i, rc;
++	DEBUG_INITIALISE(g_state.local)
++
++	vchiq_log_trace(vchiq_arm_log_level,
++		 "vchiq_ioctl - instance %x, cmd %s, arg %lx",
++		(unsigned int)instance,
++		((_IOC_TYPE(cmd) == VCHIQ_IOC_MAGIC) &&
++		(_IOC_NR(cmd) <= VCHIQ_IOC_MAX)) ?
++		ioctl_names[_IOC_NR(cmd)] : "<invalid>", arg);
++
++	switch (cmd) {
++	case VCHIQ_IOC_SHUTDOWN:
++		if (!instance->connected)
++			break;
++
++		/* Remove all services */
++		i = 0;
++		while ((service = next_service_by_instance(instance->state,
++			instance, &i)) != NULL) {
++			status = vchiq_remove_service(service->handle);
++			unlock_service(service);
++			if (status != VCHIQ_SUCCESS)
++				break;
++		}
++		service = NULL;
++
++		if (status == VCHIQ_SUCCESS) {
++			/* Wake the completion thread and ask it to exit */
++			instance->closing = 1;
++			up(&instance->insert_event);
++		}
++
++		break;
++
++	case VCHIQ_IOC_CONNECT:
++		if (instance->connected) {
++			ret = -EINVAL;
++			break;
++		}
++		rc = mutex_lock_interruptible(&instance->state->mutex);
++		if (rc != 0) {
++			vchiq_log_error(vchiq_arm_log_level,
++				"vchiq: connect: could not lock mutex for "
++				"state %d: %d",
++				instance->state->id, rc);
++			ret = -EINTR;
++			break;
++		}
++		status = vchiq_connect_internal(instance->state, instance);
++		mutex_unlock(&instance->state->mutex);
++
++		if (status == VCHIQ_SUCCESS)
++			instance->connected = 1;
++		else
++			vchiq_log_error(vchiq_arm_log_level,
++				"vchiq: could not connect: %d", status);
++		break;
++
++	case VCHIQ_IOC_CREATE_SERVICE: {
++		VCHIQ_CREATE_SERVICE_T args;
++		USER_SERVICE_T *user_service = NULL;
++		void *userdata;
++		int srvstate;
++
++		if (copy_from_user
++			 (&args, (const void __user *)arg,
++			  sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		user_service = kmalloc(sizeof(USER_SERVICE_T), GFP_KERNEL);
++		if (!user_service) {
++			ret = -ENOMEM;
++			break;
++		}
++
++		if (args.is_open) {
++			if (!instance->connected) {
++				ret = -ENOTCONN;
++				kfree(user_service);
++				break;
++			}
++			srvstate = VCHIQ_SRVSTATE_OPENING;
++		} else {
++			srvstate =
++				 instance->connected ?
++				 VCHIQ_SRVSTATE_LISTENING :
++				 VCHIQ_SRVSTATE_HIDDEN;
++		}
++
++		userdata = args.params.userdata;
++		args.params.callback = service_callback;
++		args.params.userdata = user_service;
++		service = vchiq_add_service_internal(
++				instance->state,
++				&args.params, srvstate,
++				instance);
++
++		if (service != NULL) {
++			user_service->service = service;
++			user_service->userdata = userdata;
++			user_service->instance = instance;
++			user_service->is_vchi = args.is_vchi;
++			user_service->dequeue_pending = 0;
++			user_service->message_available_pos =
++				instance->completion_remove - 1;
++			user_service->msg_insert = 0;
++			user_service->msg_remove = 0;
++			sema_init(&user_service->insert_event, 0);
++			sema_init(&user_service->remove_event, 0);
++
++			if (args.is_open) {
++				status = vchiq_open_service_internal
++					(service, instance->pid);
++				if (status != VCHIQ_SUCCESS) {
++					vchiq_remove_service(service->handle);
++					service = NULL;
++					ret = (status == VCHIQ_RETRY) ?
++						-EINTR : -EIO;
++					user_service->service = NULL;
++					user_service->instance = NULL;
++					break;
++				}
++			}
++
++			if (copy_to_user((void __user *)
++				&(((VCHIQ_CREATE_SERVICE_T __user *)
++					arg)->handle),
++				(const void *)&service->handle,
++				sizeof(service->handle)) != 0) {
++				ret = -EFAULT;
++				vchiq_remove_service(service->handle);
++				kfree(user_service);
++			}
++
++			service = NULL;
++		} else {
++			ret = -EEXIST;
++			kfree(user_service);
++		}
++	} break;
++
++	case VCHIQ_IOC_CLOSE_SERVICE: {
++		VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
++
++		service = find_service_for_instance(instance, handle);
++		if (service != NULL)
++			status = vchiq_close_service(service->handle);
++		else
++			ret = -EINVAL;
++	} break;
++
++	case VCHIQ_IOC_REMOVE_SERVICE: {
++		VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
++
++		service = find_service_for_instance(instance, handle);
++		if (service != NULL)
++			status = vchiq_remove_service(service->handle);
++		else
++			ret = -EINVAL;
++	} break;
++
++	case VCHIQ_IOC_USE_SERVICE:
++	case VCHIQ_IOC_RELEASE_SERVICE:	{
++		VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
++
++		service = find_service_for_instance(instance, handle);
++		if (service != NULL) {
++			status = (cmd == VCHIQ_IOC_USE_SERVICE)	?
++				vchiq_use_service_internal(service) :
++				vchiq_release_service_internal(service);
++			if (status != VCHIQ_SUCCESS) {
++				vchiq_log_error(vchiq_susp_log_level,
++					"%s: cmd %s returned error %d for "
++					"service %c%c%c%c:%03d",
++					__func__,
++					(cmd == VCHIQ_IOC_USE_SERVICE) ?
++						"VCHIQ_IOC_USE_SERVICE" :
++						"VCHIQ_IOC_RELEASE_SERVICE",
++					status,
++					VCHIQ_FOURCC_AS_4CHARS(
++						service->base.fourcc),
++					service->client_id);
++				ret = -EINVAL;
++			}
++		} else
++			ret = -EINVAL;
++	} break;
++
++	case VCHIQ_IOC_QUEUE_MESSAGE: {
++		VCHIQ_QUEUE_MESSAGE_T args;
++		if (copy_from_user
++			 (&args, (const void __user *)arg,
++			  sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		service = find_service_for_instance(instance, args.handle);
++
++		if ((service != NULL) && (args.count <= MAX_ELEMENTS)) {
++			/* Copy elements into kernel space */
++			VCHIQ_ELEMENT_T elements[MAX_ELEMENTS];
++			if (copy_from_user(elements, args.elements,
++				args.count * sizeof(VCHIQ_ELEMENT_T)) == 0)
++				status = vchiq_queue_message
++					(args.handle,
++					elements, args.count);
++			else
++				ret = -EFAULT;
++		} else {
++			ret = -EINVAL;
++		}
++	} break;
++
++	case VCHIQ_IOC_QUEUE_BULK_TRANSMIT:
++	case VCHIQ_IOC_QUEUE_BULK_RECEIVE: {
++		VCHIQ_QUEUE_BULK_TRANSFER_T args;
++		struct bulk_waiter_node *waiter = NULL;
++		VCHIQ_BULK_DIR_T dir =
++			(cmd == VCHIQ_IOC_QUEUE_BULK_TRANSMIT) ?
++			VCHIQ_BULK_TRANSMIT : VCHIQ_BULK_RECEIVE;
++
++		if (copy_from_user
++			(&args, (const void __user *)arg,
++			sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		service = find_service_for_instance(instance, args.handle);
++		if (!service) {
++			ret = -EINVAL;
++			break;
++		}
++
++		if (args.mode == VCHIQ_BULK_MODE_BLOCKING) {
++			waiter = kzalloc(sizeof(struct bulk_waiter_node),
++				GFP_KERNEL);
++			if (!waiter) {
++				ret = -ENOMEM;
++				break;
++			}
++			args.userdata = &waiter->bulk_waiter;
++		} else if (args.mode == VCHIQ_BULK_MODE_WAITING) {
++			struct list_head *pos;
++			mutex_lock(&instance->bulk_waiter_list_mutex);
++			list_for_each(pos, &instance->bulk_waiter_list) {
++				if (list_entry(pos, struct bulk_waiter_node,
++					list)->pid == current->pid) {
++					waiter = list_entry(pos,
++						struct bulk_waiter_node,
++						list);
++					list_del(pos);
++					break;
++				}
++
++			}
++			mutex_unlock(&instance->bulk_waiter_list_mutex);
++			if (!waiter) {
++				vchiq_log_error(vchiq_arm_log_level,
++					"no bulk_waiter found for pid %d",
++					current->pid);
++				ret = -ESRCH;
++				break;
++			}
++			vchiq_log_info(vchiq_arm_log_level,
++				"found bulk_waiter %x for pid %d",
++				(unsigned int)waiter, current->pid);
++			args.userdata = &waiter->bulk_waiter;
++		}
++		status = vchiq_bulk_transfer
++			(args.handle,
++			 VCHI_MEM_HANDLE_INVALID,
++			 args.data, args.size,
++			 args.userdata, args.mode,
++			 dir);
++		if (!waiter)
++			break;
++		if ((status != VCHIQ_RETRY) || fatal_signal_pending(current) ||
++			!waiter->bulk_waiter.bulk) {
++			if (waiter->bulk_waiter.bulk) {
++				/* Cancel the signal when the transfer
++				** completes. */
++				spin_lock(&bulk_waiter_spinlock);
++				waiter->bulk_waiter.bulk->userdata = NULL;
++				spin_unlock(&bulk_waiter_spinlock);
++			}
++			kfree(waiter);
++		} else {
++			const VCHIQ_BULK_MODE_T mode_waiting =
++				VCHIQ_BULK_MODE_WAITING;
++			waiter->pid = current->pid;
++			mutex_lock(&instance->bulk_waiter_list_mutex);
++			list_add(&waiter->list, &instance->bulk_waiter_list);
++			mutex_unlock(&instance->bulk_waiter_list_mutex);
++			vchiq_log_info(vchiq_arm_log_level,
++				"saved bulk_waiter %x for pid %d",
++				(unsigned int)waiter, current->pid);
++
++			if (copy_to_user((void __user *)
++				&(((VCHIQ_QUEUE_BULK_TRANSFER_T __user *)
++					arg)->mode),
++				(const void *)&mode_waiting,
++				sizeof(mode_waiting)) != 0)
++				ret = -EFAULT;
++		}
++	} break;
++
++	case VCHIQ_IOC_AWAIT_COMPLETION: {
++		VCHIQ_AWAIT_COMPLETION_T args;
++
++		DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++		if (!instance->connected) {
++			ret = -ENOTCONN;
++			break;
++		}
++
++		if (copy_from_user(&args, (const void __user *)arg,
++			sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		mutex_lock(&instance->completion_mutex);
++
++		DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++		while ((instance->completion_remove ==
++			instance->completion_insert)
++			&& !instance->closing) {
++			int rc;
++			DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++			mutex_unlock(&instance->completion_mutex);
++			rc = down_interruptible(&instance->insert_event);
++			mutex_lock(&instance->completion_mutex);
++			if (rc != 0) {
++				DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++				vchiq_log_info(vchiq_arm_log_level,
++					"AWAIT_COMPLETION interrupted");
++				ret = -EINTR;
++				break;
++			}
++		}
++		DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++
++		/* A read memory barrier is needed to stop prefetch of a stale
++		** completion record
++		*/
++		rmb();
++
++		if (ret == 0) {
++			int msgbufcount = args.msgbufcount;
++			for (ret = 0; ret < args.count; ret++) {
++				VCHIQ_COMPLETION_DATA_T *completion;
++				VCHIQ_SERVICE_T *service;
++				USER_SERVICE_T *user_service;
++				VCHIQ_HEADER_T *header;
++				if (instance->completion_remove ==
++					instance->completion_insert)
++					break;
++				completion = &instance->completions[
++					instance->completion_remove &
++					(MAX_COMPLETIONS - 1)];
++
++				service = completion->service_userdata;
++				user_service = service->base.userdata;
++				completion->service_userdata =
++					user_service->userdata;
++
++				header = completion->header;
++				if (header) {
++					void __user *msgbuf;
++					int msglen;
++
++					msglen = header->size +
++						sizeof(VCHIQ_HEADER_T);
++					/* This must be a VCHIQ-style service */
++					if (args.msgbufsize < msglen) {
++						vchiq_log_error(
++							vchiq_arm_log_level,
++							"header %x: msgbufsize"
++							" %x < msglen %x",
++							(unsigned int)header,
++							args.msgbufsize,
++							msglen);
++						WARN(1, "invalid message "
++							"size\n");
++						if (ret == 0)
++							ret = -EMSGSIZE;
++						break;
++					}
++					if (msgbufcount <= 0)
++						/* Stall here for lack of a
++						** buffer for the message. */
++						break;
++					/* Get the pointer from user space */
++					msgbufcount--;
++					if (copy_from_user(&msgbuf,
++						(const void __user *)
++						&args.msgbufs[msgbufcount],
++						sizeof(msgbuf)) != 0) {
++						if (ret == 0)
++							ret = -EFAULT;
++						break;
++					}
++
++					/* Copy the message to user space */
++					if (copy_to_user(msgbuf, header,
++						msglen) != 0) {
++						if (ret == 0)
++							ret = -EFAULT;
++						break;
++					}
++
++					/* Now it has been copied, the message
++					** can be released. */
++					vchiq_release_message(service->handle,
++						header);
++
++					/* The completion must point to the
++					** msgbuf. */
++					completion->header = msgbuf;
++				}
++
++				if (completion->reason ==
++					VCHIQ_SERVICE_CLOSED) {
++					unlock_service(service);
++					kfree(user_service);
++				}
++
++				if (copy_to_user((void __user *)(
++					(size_t)args.buf +
++					ret * sizeof(VCHIQ_COMPLETION_DATA_T)),
++					completion,
++					sizeof(VCHIQ_COMPLETION_DATA_T)) != 0) {
++						if (ret == 0)
++							ret = -EFAULT;
++					break;
++				}
++
++				instance->completion_remove++;
++			}
++
++			if (msgbufcount != args.msgbufcount) {
++				if (copy_to_user((void __user *)
++					&((VCHIQ_AWAIT_COMPLETION_T *)arg)->
++						msgbufcount,
++					&msgbufcount,
++					sizeof(msgbufcount)) != 0) {
++					ret = -EFAULT;
++				}
++			}
++		}
++
++		if (ret != 0)
++			up(&instance->remove_event);
++		mutex_unlock(&instance->completion_mutex);
++		DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++	} break;
++
++	case VCHIQ_IOC_DEQUEUE_MESSAGE: {
++		VCHIQ_DEQUEUE_MESSAGE_T args;
++		USER_SERVICE_T *user_service;
++		VCHIQ_HEADER_T *header;
++
++		DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
++		if (copy_from_user
++			 (&args, (const void __user *)arg,
++			  sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++		service = find_service_for_instance(instance, args.handle);
++		if (!service) {
++			ret = -EINVAL;
++			break;
++		}
++		user_service = (USER_SERVICE_T *)service->base.userdata;
++		if (user_service->is_vchi == 0) {
++			ret = -EINVAL;
++			break;
++		}
++
++		spin_lock(&msg_queue_spinlock);
++		if (user_service->msg_remove == user_service->msg_insert) {
++			if (!args.blocking) {
++				spin_unlock(&msg_queue_spinlock);
++				DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
++				ret = -EWOULDBLOCK;
++				break;
++			}
++			user_service->dequeue_pending = 1;
++			do {
++				spin_unlock(&msg_queue_spinlock);
++				DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
++				if (down_interruptible(
++					&user_service->insert_event) != 0) {
++					vchiq_log_info(vchiq_arm_log_level,
++						"DEQUEUE_MESSAGE interrupted");
++					ret = -EINTR;
++					break;
++				}
++				spin_lock(&msg_queue_spinlock);
++			} while (user_service->msg_remove ==
++				user_service->msg_insert);
++
++			if (ret)
++				break;
++		}
++
++		BUG_ON((int)(user_service->msg_insert -
++			user_service->msg_remove) < 0);
++
++		header = user_service->msg_queue[user_service->msg_remove &
++			(MSG_QUEUE_SIZE - 1)];
++		user_service->msg_remove++;
++		spin_unlock(&msg_queue_spinlock);
++
++		up(&user_service->remove_event);
++		if (header == NULL)
++			ret = -ENOTCONN;
++		else if (header->size <= args.bufsize) {
++			/* Copy to user space if msgbuf is not NULL */
++			if ((args.buf == NULL) ||
++				(copy_to_user((void __user *)args.buf,
++				header->data,
++				header->size) == 0)) {
++				ret = header->size;
++				vchiq_release_message(
++					service->handle,
++					header);
++			} else
++				ret = -EFAULT;
++		} else {
++			vchiq_log_error(vchiq_arm_log_level,
++				"header %x: bufsize %x < size %x",
++				(unsigned int)header, args.bufsize,
++				header->size);
++			WARN(1, "invalid size\n");
++			ret = -EMSGSIZE;
++		}
++		DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
++	} break;
++
++	case VCHIQ_IOC_GET_CLIENT_ID: {
++		VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
++
++		ret = vchiq_get_client_id(handle);
++	} break;
++
++	case VCHIQ_IOC_GET_CONFIG: {
++		VCHIQ_GET_CONFIG_T args;
++		VCHIQ_CONFIG_T config;
++
++		if (copy_from_user(&args, (const void __user *)arg,
++			sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++		if (args.config_size > sizeof(config)) {
++			ret = -EINVAL;
++			break;
++		}
++		status = vchiq_get_config(instance, args.config_size, &config);
++		if (status == VCHIQ_SUCCESS) {
++			if (copy_to_user((void __user *)args.pconfig,
++				    &config, args.config_size) != 0) {
++				ret = -EFAULT;
++				break;
++			}
++		}
++	} break;
++
++	case VCHIQ_IOC_SET_SERVICE_OPTION: {
++		VCHIQ_SET_SERVICE_OPTION_T args;
++
++		if (copy_from_user(
++			&args, (const void __user *)arg,
++			sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		service = find_service_for_instance(instance, args.handle);
++		if (!service) {
++			ret = -EINVAL;
++			break;
++		}
++
++		status = vchiq_set_service_option(
++				args.handle, args.option, args.value);
++	} break;
++
++	case VCHIQ_IOC_DUMP_PHYS_MEM: {
++		VCHIQ_DUMP_MEM_T  args;
++
++		if (copy_from_user
++			 (&args, (const void __user *)arg,
++			  sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++		dump_phys_mem(args.virt_addr, args.num_bytes);
++	} break;
++
++	default:
++		ret = -ENOTTY;
++		break;
++	}
++
++	if (service)
++		unlock_service(service);
++
++	if (ret == 0) {
++		if (status == VCHIQ_ERROR)
++			ret = -EIO;
++		else if (status == VCHIQ_RETRY)
++			ret = -EINTR;
++	}
++
++	if ((status == VCHIQ_SUCCESS) && (ret < 0) && (ret != -EINTR) &&
++		(ret != -EWOULDBLOCK))
++		vchiq_log_info(vchiq_arm_log_level,
++			"  ioctl instance %lx, cmd %s -> status %d, %ld",
++			(unsigned long)instance,
++			(_IOC_NR(cmd) <= VCHIQ_IOC_MAX) ?
++				ioctl_names[_IOC_NR(cmd)] :
++				"<invalid>",
++			status, ret);
++	else
++		vchiq_log_trace(vchiq_arm_log_level,
++			"  ioctl instance %lx, cmd %s -> status %d, %ld",
++			(unsigned long)instance,
++			(_IOC_NR(cmd) <= VCHIQ_IOC_MAX) ?
++				ioctl_names[_IOC_NR(cmd)] :
++				"<invalid>",
++			status, ret);
++
++	return ret;
++}
++
++/****************************************************************************
++*
++*   vchiq_open
++*
++***************************************************************************/
++
++static int
++vchiq_open(struct inode *inode, struct file *file)
++{
++	int dev = iminor(inode) & 0x0f;
++	vchiq_log_info(vchiq_arm_log_level, "vchiq_open");
++	switch (dev) {
++	case VCHIQ_MINOR: {
++		int ret;
++		VCHIQ_STATE_T *state = vchiq_get_state();
++		VCHIQ_INSTANCE_T instance;
++
++		if (!state) {
++			vchiq_log_error(vchiq_arm_log_level,
++				"vchiq has no connection to VideoCore");
++			return -ENOTCONN;
++		}
++
++		instance = kzalloc(sizeof(*instance), GFP_KERNEL);
++		if (!instance)
++			return -ENOMEM;
++
++		instance->state = state;
++		instance->pid = current->tgid;
++
++		ret = vchiq_proc_add_instance(instance);
++		if (ret != 0) {
++			kfree(instance);
++			return ret;
++		}
++
++		sema_init(&instance->insert_event, 0);
++		sema_init(&instance->remove_event, 0);
++		mutex_init(&instance->completion_mutex);
++		mutex_init(&instance->bulk_waiter_list_mutex);
++		INIT_LIST_HEAD(&instance->bulk_waiter_list);
++
++		file->private_data = instance;
++	} break;
++
++	default:
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unknown minor device: %d", dev);
++		return -ENXIO;
++	}
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vchiq_release
++*
++***************************************************************************/
++
++static int
++vchiq_release(struct inode *inode, struct file *file)
++{
++	int dev = iminor(inode) & 0x0f;
++	int ret = 0;
++	switch (dev) {
++	case VCHIQ_MINOR: {
++		VCHIQ_INSTANCE_T instance = file->private_data;
++		VCHIQ_STATE_T *state = vchiq_get_state();
++		VCHIQ_SERVICE_T *service;
++		int i;
++
++		vchiq_log_info(vchiq_arm_log_level,
++			"vchiq_release: instance=%lx",
++			(unsigned long)instance);
++
++		if (!state) {
++			ret = -EPERM;
++			goto out;
++		}
++
++		/* Ensure videocore is awake to allow termination. */
++		vchiq_use_internal(instance->state, NULL,
++				USE_TYPE_VCHIQ);
++
++		mutex_lock(&instance->completion_mutex);
++
++		/* Wake the completion thread and ask it to exit */
++		instance->closing = 1;
++		up(&instance->insert_event);
++
++		mutex_unlock(&instance->completion_mutex);
++
++		/* Wake the slot handler if the completion queue is full. */
++		up(&instance->remove_event);
++
++		/* Mark all services for termination... */
++		i = 0;
++		while ((service = next_service_by_instance(state, instance,
++			&i)) !=	NULL) {
++			USER_SERVICE_T *user_service = service->base.userdata;
++
++			/* Wake the slot handler if the msg queue is full. */
++			up(&user_service->remove_event);
++
++			vchiq_terminate_service_internal(service);
++			unlock_service(service);
++		}
++
++		/* ...and wait for them to die */
++		i = 0;
++		while ((service = next_service_by_instance(state, instance, &i))
++			!= NULL) {
++			USER_SERVICE_T *user_service = service->base.userdata;
++
++			down(&service->remove_event);
++
++			BUG_ON(service->srvstate != VCHIQ_SRVSTATE_FREE);
++
++			spin_lock(&msg_queue_spinlock);
++
++			while (user_service->msg_remove !=
++				user_service->msg_insert) {
++				VCHIQ_HEADER_T *header = user_service->
++					msg_queue[user_service->msg_remove &
++						(MSG_QUEUE_SIZE - 1)];
++				user_service->msg_remove++;
++				spin_unlock(&msg_queue_spinlock);
++
++				if (header)
++					vchiq_release_message(
++						service->handle,
++						header);
++				spin_lock(&msg_queue_spinlock);
++			}
++
++			spin_unlock(&msg_queue_spinlock);
++
++			unlock_service(service);
++			kfree(user_service);
++		}
++
++		/* Release any closed services */
++		while (instance->completion_remove !=
++			instance->completion_insert) {
++			VCHIQ_COMPLETION_DATA_T *completion;
++			VCHIQ_SERVICE_T *service;
++			completion = &instance->completions[
++				instance->completion_remove &
++				(MAX_COMPLETIONS - 1)];
++			service = completion->service_userdata;
++			if (completion->reason == VCHIQ_SERVICE_CLOSED)
++				unlock_service(service);
++			instance->completion_remove++;
++		}
++
++		/* Release the PEER service count. */
++		vchiq_release_internal(instance->state, NULL);
++
++		{
++			struct list_head *pos, *next;
++			list_for_each_safe(pos, next,
++				&instance->bulk_waiter_list) {
++				struct bulk_waiter_node *waiter;
++				waiter = list_entry(pos,
++					struct bulk_waiter_node,
++					list);
++				list_del(pos);
++				vchiq_log_info(vchiq_arm_log_level,
++					"bulk_waiter - cleaned up %x "
++					"for pid %d",
++					(unsigned int)waiter, waiter->pid);
++				kfree(waiter);
++			}
++		}
++
++		vchiq_proc_remove_instance(instance);
++
++		kfree(instance);
++		file->private_data = NULL;
++	} break;
++
++	default:
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unknown minor device: %d", dev);
++		ret = -ENXIO;
++	}
++
++out:
++	return ret;
++}
++
++/****************************************************************************
++*
++*   vchiq_dump
++*
++***************************************************************************/
++
++void
++vchiq_dump(void *dump_context, const char *str, int len)
++{
++	DUMP_CONTEXT_T *context = (DUMP_CONTEXT_T *)dump_context;
++
++	if (context->actual < context->space) {
++		int copy_bytes;
++		if (context->offset > 0) {
++			int skip_bytes = min(len, (int)context->offset);
++			str += skip_bytes;
++			len -= skip_bytes;
++			context->offset -= skip_bytes;
++			if (context->offset > 0)
++				return;
++		}
++		copy_bytes = min(len, (int)(context->space - context->actual));
++		if (copy_bytes == 0)
++			return;
++		if (copy_to_user(context->buf + context->actual, str,
++			copy_bytes))
++			context->actual = -EFAULT;
++		context->actual += copy_bytes;
++		len -= copy_bytes;
++
++		/* If tne terminating NUL is included in the length, then it
++		** marks the end of a line and should be replaced with a
++		** carriage return. */
++		if ((len == 0) && (str[copy_bytes - 1] == '\0')) {
++			char cr = '\n';
++			if (copy_to_user(context->buf + context->actual - 1,
++				&cr, 1))
++				context->actual = -EFAULT;
++		}
++	}
++}
++
++/****************************************************************************
++*
++*   vchiq_dump_platform_instance_state
++*
++***************************************************************************/
++
++void
++vchiq_dump_platform_instances(void *dump_context)
++{
++	VCHIQ_STATE_T *state = vchiq_get_state();
++	char buf[80];
++	int len;
++	int i;
++
++	/* There is no list of instances, so instead scan all services,
++		marking those that have been dumped. */
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		VCHIQ_INSTANCE_T instance;
++
++		if (service && (service->base.callback == service_callback)) {
++			instance = service->instance;
++			if (instance)
++				instance->mark = 0;
++		}
++	}
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		VCHIQ_INSTANCE_T instance;
++
++		if (service && (service->base.callback == service_callback)) {
++			instance = service->instance;
++			if (instance && !instance->mark) {
++				len = snprintf(buf, sizeof(buf),
++					"Instance %x: pid %d,%s completions "
++						"%d/%d",
++					(unsigned int)instance, instance->pid,
++					instance->connected ? " connected, " :
++						"",
++					instance->completion_insert -
++						instance->completion_remove,
++					MAX_COMPLETIONS);
++
++				vchiq_dump(dump_context, buf, len + 1);
++
++				instance->mark = 1;
++			}
++		}
++	}
++}
++
++/****************************************************************************
++*
++*   vchiq_dump_platform_service_state
++*
++***************************************************************************/
++
++void
++vchiq_dump_platform_service_state(void *dump_context, VCHIQ_SERVICE_T *service)
++{
++	USER_SERVICE_T *user_service = (USER_SERVICE_T *)service->base.userdata;
++	char buf[80];
++	int len;
++
++	len = snprintf(buf, sizeof(buf), "  instance %x",
++		(unsigned int)service->instance);
++
++	if ((service->base.callback == service_callback) &&
++		user_service->is_vchi) {
++		len += snprintf(buf + len, sizeof(buf) - len,
++			", %d/%d messages",
++			user_service->msg_insert - user_service->msg_remove,
++			MSG_QUEUE_SIZE);
++
++		if (user_service->dequeue_pending)
++			len += snprintf(buf + len, sizeof(buf) - len,
++				" (dequeue pending)");
++	}
++
++	vchiq_dump(dump_context, buf, len + 1);
++}
++
++/****************************************************************************
++*
++*   dump_user_mem
++*
++***************************************************************************/
++
++static void
++dump_phys_mem(void *virt_addr, uint32_t num_bytes)
++{
++	int            rc;
++	uint8_t       *end_virt_addr = virt_addr + num_bytes;
++	int            num_pages;
++	int            offset;
++	int            end_offset;
++	int            page_idx;
++	int            prev_idx;
++	struct page   *page;
++	struct page  **pages;
++	uint8_t       *kmapped_virt_ptr;
++
++	/* Align virtAddr and endVirtAddr to 16 byte boundaries. */
++
++	virt_addr = (void *)((unsigned long)virt_addr & ~0x0fuL);
++	end_virt_addr = (void *)(((unsigned long)end_virt_addr + 15uL) &
++		~0x0fuL);
++
++	offset = (int)(long)virt_addr & (PAGE_SIZE - 1);
++	end_offset = (int)(long)end_virt_addr & (PAGE_SIZE - 1);
++
++	num_pages = (offset + num_bytes + PAGE_SIZE - 1) / PAGE_SIZE;
++
++	pages = kmalloc(sizeof(struct page *) * num_pages, GFP_KERNEL);
++	if (pages == NULL) {
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unable to allocation memory for %d pages\n",
++			num_pages);
++		return;
++	}
++
++	down_read(&current->mm->mmap_sem);
++	rc = get_user_pages(current,      /* task */
++		current->mm,              /* mm */
++		(unsigned long)virt_addr, /* start */
++		num_pages,                /* len */
++		0,                        /* write */
++		0,                        /* force */
++		pages,                    /* pages (array of page pointers) */
++		NULL);                    /* vmas */
++	up_read(&current->mm->mmap_sem);
++
++	prev_idx = -1;
++	page = NULL;
++
++	while (offset < end_offset) {
++
++		int page_offset = offset % PAGE_SIZE;
++		page_idx = offset / PAGE_SIZE;
++
++		if (page_idx != prev_idx) {
++
++			if (page != NULL)
++				kunmap(page);
++			page = pages[page_idx];
++			kmapped_virt_ptr = kmap(page);
++
++			prev_idx = page_idx;
++		}
++
++		if (vchiq_arm_log_level >= VCHIQ_LOG_TRACE)
++			vchiq_log_dump_mem("ph",
++				(uint32_t)(unsigned long)&kmapped_virt_ptr[
++					page_offset],
++				&kmapped_virt_ptr[page_offset], 16);
++
++		offset += 16;
++	}
++	if (page != NULL)
++		kunmap(page);
++
++	for (page_idx = 0; page_idx < num_pages; page_idx++)
++		page_cache_release(pages[page_idx]);
++
++	kfree(pages);
++}
++
++/****************************************************************************
++*
++*   vchiq_read
++*
++***************************************************************************/
++
++static ssize_t
++vchiq_read(struct file *file, char __user *buf,
++	size_t count, loff_t *ppos)
++{
++	DUMP_CONTEXT_T context;
++	context.buf = buf;
++	context.actual = 0;
++	context.space = count;
++	context.offset = *ppos;
++
++	vchiq_dump_state(&context, &g_state);
++
++	*ppos += context.actual;
++
++	return context.actual;
++}
++
++VCHIQ_STATE_T *
++vchiq_get_state(void)
++{
++
++	if (g_state.remote == NULL)
++		printk(KERN_ERR "%s: g_state.remote == NULL\n", __func__);
++	else if (g_state.remote->initialised != 1)
++		printk(KERN_NOTICE "%s: g_state.remote->initialised != 1 (%d)\n",
++			__func__, g_state.remote->initialised);
++
++	return ((g_state.remote != NULL) &&
++		(g_state.remote->initialised == 1)) ? &g_state : NULL;
++}
++
++static const struct file_operations
++vchiq_fops = {
++	.owner = THIS_MODULE,
++	.unlocked_ioctl = vchiq_ioctl,
++	.open = vchiq_open,
++	.release = vchiq_release,
++	.read = vchiq_read
++};
++
++/*
++ * Autosuspend related functionality
++ */
++
++int
++vchiq_videocore_wanted(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	if (!arm_state)
++		/* autosuspend not supported - always return wanted */
++		return 1;
++	else if (arm_state->blocked_count)
++		return 1;
++	else if (!arm_state->videocore_use_count)
++		/* usage count zero - check for override unless we're forcing */
++		if (arm_state->resume_blocked)
++			return 0;
++		else
++			return vchiq_platform_videocore_wanted(state);
++	else
++		/* non-zero usage count - videocore still required */
++		return 1;
++}
++
++static VCHIQ_STATUS_T
++vchiq_keepalive_vchiq_callback(VCHIQ_REASON_T reason,
++	VCHIQ_HEADER_T *header,
++	VCHIQ_SERVICE_HANDLE_T service_user,
++	void *bulk_user)
++{
++	vchiq_log_error(vchiq_susp_log_level,
++		"%s callback reason %d", __func__, reason);
++	return 0;
++}
++
++static int
++vchiq_keepalive_thread_func(void *v)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v;
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++
++	VCHIQ_STATUS_T status;
++	VCHIQ_INSTANCE_T instance;
++	VCHIQ_SERVICE_HANDLE_T ka_handle;
++
++	VCHIQ_SERVICE_PARAMS_T params = {
++		.fourcc      = VCHIQ_MAKE_FOURCC('K', 'E', 'E', 'P'),
++		.callback    = vchiq_keepalive_vchiq_callback,
++		.version     = KEEPALIVE_VER,
++		.version_min = KEEPALIVE_VER_MIN
++	};
++
++	status = vchiq_initialise(&instance);
++	if (status != VCHIQ_SUCCESS) {
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s vchiq_initialise failed %d", __func__, status);
++		goto exit;
++	}
++
++	status = vchiq_connect(instance);
++	if (status != VCHIQ_SUCCESS) {
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s vchiq_connect failed %d", __func__, status);
++		goto shutdown;
++	}
++
++	status = vchiq_add_service(instance, &params, &ka_handle);
++	if (status != VCHIQ_SUCCESS) {
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s vchiq_open_service failed %d", __func__, status);
++		goto shutdown;
++	}
++
++	while (1) {
++		long rc = 0, uc = 0;
++		if (wait_for_completion_interruptible(&arm_state->ka_evt)
++				!= 0) {
++			vchiq_log_error(vchiq_susp_log_level,
++				"%s interrupted", __func__);
++			flush_signals(current);
++			continue;
++		}
++
++		/* read and clear counters.  Do release_count then use_count to
++		 * prevent getting more releases than uses */
++		rc = atomic_xchg(&arm_state->ka_release_count, 0);
++		uc = atomic_xchg(&arm_state->ka_use_count, 0);
++
++		/* Call use/release service the requisite number of times.
++		 * Process use before release so use counts don't go negative */
++		while (uc--) {
++			atomic_inc(&arm_state->ka_use_ack_count);
++			status = vchiq_use_service(ka_handle);
++			if (status != VCHIQ_SUCCESS) {
++				vchiq_log_error(vchiq_susp_log_level,
++					"%s vchiq_use_service error %d",
++					__func__, status);
++			}
++		}
++		while (rc--) {
++			status = vchiq_release_service(ka_handle);
++			if (status != VCHIQ_SUCCESS) {
++				vchiq_log_error(vchiq_susp_log_level,
++					"%s vchiq_release_service error %d",
++					__func__, status);
++			}
++		}
++	}
++
++shutdown:
++	vchiq_shutdown(instance);
++exit:
++	return 0;
++}
++
++
++
++VCHIQ_STATUS_T
++vchiq_arm_init_state(VCHIQ_STATE_T *state, VCHIQ_ARM_STATE_T *arm_state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	if (arm_state) {
++		rwlock_init(&arm_state->susp_res_lock);
++
++		init_completion(&arm_state->ka_evt);
++		atomic_set(&arm_state->ka_use_count, 0);
++		atomic_set(&arm_state->ka_use_ack_count, 0);
++		atomic_set(&arm_state->ka_release_count, 0);
++
++		init_completion(&arm_state->vc_suspend_complete);
++
++		init_completion(&arm_state->vc_resume_complete);
++		/* Initialise to 'done' state.  We only want to block on resume
++		 * completion while videocore is suspended. */
++		set_resume_state(arm_state, VC_RESUME_RESUMED);
++
++		init_completion(&arm_state->resume_blocker);
++		/* Initialise to 'done' state.  We only want to block on this
++		 * completion while resume is blocked */
++		complete_all(&arm_state->resume_blocker);
++
++		init_completion(&arm_state->blocked_blocker);
++		/* Initialise to 'done' state.  We only want to block on this
++		 * completion while things are waiting on the resume blocker */
++		complete_all(&arm_state->blocked_blocker);
++
++		arm_state->suspend_timer_timeout = SUSPEND_TIMER_TIMEOUT_MS;
++		arm_state->suspend_timer_running = 0;
++		init_timer(&arm_state->suspend_timer);
++		arm_state->suspend_timer.data = (unsigned long)(state);
++		arm_state->suspend_timer.function = suspend_timer_callback;
++
++		arm_state->first_connect = 0;
++
++	}
++	return status;
++}
++
++/*
++** Functions to modify the state variables;
++**	set_suspend_state
++**	set_resume_state
++**
++** There are more state variables than we might like, so ensure they remain in
++** step.  Suspend and resume state are maintained separately, since most of
++** these state machines can operate independently.  However, there are a few
++** states where state transitions in one state machine cause a reset to the
++** other state machine.  In addition, there are some completion events which
++** need to occur on state machine reset and end-state(s), so these are also
++** dealt with in these functions.
++**
++** In all states we set the state variable according to the input, but in some
++** cases we perform additional steps outlined below;
++**
++** VC_SUSPEND_IDLE - Initialise the suspend completion at the same time.
++**			The suspend completion is completed after any suspend
++**			attempt.  When we reset the state machine we also reset
++**			the completion.  This reset occurs when videocore is
++**			resumed, and also if we initiate suspend after a suspend
++**			failure.
++**
++** VC_SUSPEND_IN_PROGRESS - This state is considered the point of no return for
++**			suspend - ie from this point on we must try to suspend
++**			before resuming can occur.  We therefore also reset the
++**			resume state machine to VC_RESUME_IDLE in this state.
++**
++** VC_SUSPEND_SUSPENDED - Suspend has completed successfully. Also call
++**			complete_all on the suspend completion to notify
++**			anything waiting for suspend to happen.
++**
++** VC_SUSPEND_REJECTED - Videocore rejected suspend. Videocore will also
++**			initiate resume, so no need to alter resume state.
++**			We call complete_all on the suspend completion to notify
++**			of suspend rejection.
++**
++** VC_SUSPEND_FAILED - We failed to initiate videocore suspend.  We notify the
++**			suspend completion and reset the resume state machine.
++**
++** VC_RESUME_IDLE - Initialise the resume completion at the same time.  The
++**			resume completion is in it's 'done' state whenever
++**			videcore is running.  Therfore, the VC_RESUME_IDLE state
++**			implies that videocore is suspended.
++**			Hence, any thread which needs to wait until videocore is
++**			running can wait on this completion - it will only block
++**			if videocore is suspended.
++**
++** VC_RESUME_RESUMED - Resume has completed successfully.  Videocore is running.
++**			Call complete_all on the resume completion to unblock
++**			any threads waiting for resume.	 Also reset the suspend
++**			state machine to it's idle state.
++**
++** VC_RESUME_FAILED - Currently unused - no mechanism to fail resume exists.
++*/
++
++inline void
++set_suspend_state(VCHIQ_ARM_STATE_T *arm_state,
++	enum vc_suspend_status new_state)
++{
++	/* set the state in all cases */
++	arm_state->vc_suspend_state = new_state;
++
++	/* state specific additional actions */
++	switch (new_state) {
++	case VC_SUSPEND_FORCE_CANCELED:
++		complete_all(&arm_state->vc_suspend_complete);
++		break;
++	case VC_SUSPEND_REJECTED:
++		complete_all(&arm_state->vc_suspend_complete);
++		break;
++	case VC_SUSPEND_FAILED:
++		complete_all(&arm_state->vc_suspend_complete);
++		arm_state->vc_resume_state = VC_RESUME_RESUMED;
++		complete_all(&arm_state->vc_resume_complete);
++		break;
++	case VC_SUSPEND_IDLE:
++		INIT_COMPLETION(arm_state->vc_suspend_complete);
++		break;
++	case VC_SUSPEND_REQUESTED:
++		break;
++	case VC_SUSPEND_IN_PROGRESS:
++		set_resume_state(arm_state, VC_RESUME_IDLE);
++		break;
++	case VC_SUSPEND_SUSPENDED:
++		complete_all(&arm_state->vc_suspend_complete);
++		break;
++	default:
++		BUG();
++		break;
++	}
++}
++
++inline void
++set_resume_state(VCHIQ_ARM_STATE_T *arm_state,
++	enum vc_resume_status new_state)
++{
++	/* set the state in all cases */
++	arm_state->vc_resume_state = new_state;
++
++	/* state specific additional actions */
++	switch (new_state) {
++	case VC_RESUME_FAILED:
++		break;
++	case VC_RESUME_IDLE:
++		INIT_COMPLETION(arm_state->vc_resume_complete);
++		break;
++	case VC_RESUME_REQUESTED:
++		break;
++	case VC_RESUME_IN_PROGRESS:
++		break;
++	case VC_RESUME_RESUMED:
++		complete_all(&arm_state->vc_resume_complete);
++		set_suspend_state(arm_state, VC_SUSPEND_IDLE);
++		break;
++	default:
++		BUG();
++		break;
++	}
++}
++
++
++/* should be called with the write lock held */
++inline void
++start_suspend_timer(VCHIQ_ARM_STATE_T *arm_state)
++{
++	del_timer(&arm_state->suspend_timer);
++	arm_state->suspend_timer.expires = jiffies +
++		msecs_to_jiffies(arm_state->
++			suspend_timer_timeout);
++	add_timer(&arm_state->suspend_timer);
++	arm_state->suspend_timer_running = 1;
++}
++
++/* should be called with the write lock held */
++static inline void
++stop_suspend_timer(VCHIQ_ARM_STATE_T *arm_state)
++{
++	if (arm_state->suspend_timer_running) {
++		del_timer(&arm_state->suspend_timer);
++		arm_state->suspend_timer_running = 0;
++	}
++}
++
++static inline int
++need_resume(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	return (arm_state->vc_suspend_state > VC_SUSPEND_IDLE) &&
++			(arm_state->vc_resume_state < VC_RESUME_REQUESTED) &&
++			vchiq_videocore_wanted(state);
++}
++
++static int
++block_resume(VCHIQ_ARM_STATE_T *arm_state)
++{
++	int status = VCHIQ_SUCCESS;
++	const unsigned long timeout_val =
++				msecs_to_jiffies(FORCE_SUSPEND_TIMEOUT_MS);
++	int resume_count = 0;
++
++	/* Allow any threads which were blocked by the last force suspend to
++	 * complete if they haven't already.  Only give this one shot; if
++	 * blocked_count is incremented after blocked_blocker is completed
++	 * (which only happens when blocked_count hits 0) then those threads
++	 * will have to wait until next time around */
++	if (arm_state->blocked_count) {
++		INIT_COMPLETION(arm_state->blocked_blocker);
++		write_unlock_bh(&arm_state->susp_res_lock);
++		vchiq_log_info(vchiq_susp_log_level, "%s wait for previously "
++			"blocked clients", __func__);
++		if (wait_for_completion_interruptible_timeout(
++				&arm_state->blocked_blocker, timeout_val)
++					<= 0) {
++			vchiq_log_error(vchiq_susp_log_level, "%s wait for "
++				"previously blocked clients failed" , __func__);
++			status = VCHIQ_ERROR;
++			write_lock_bh(&arm_state->susp_res_lock);
++			goto out;
++		}
++		vchiq_log_info(vchiq_susp_log_level, "%s previously blocked "
++			"clients resumed", __func__);
++		write_lock_bh(&arm_state->susp_res_lock);
++	}
++
++	/* We need to wait for resume to complete if it's in process */
++	while (arm_state->vc_resume_state != VC_RESUME_RESUMED &&
++			arm_state->vc_resume_state > VC_RESUME_IDLE) {
++		if (resume_count > 1) {
++			status = VCHIQ_ERROR;
++			vchiq_log_error(vchiq_susp_log_level, "%s waited too "
++				"many times for resume" , __func__);
++			goto out;
++		}
++		write_unlock_bh(&arm_state->susp_res_lock);
++		vchiq_log_info(vchiq_susp_log_level, "%s wait for resume",
++			__func__);
++		if (wait_for_completion_interruptible_timeout(
++				&arm_state->vc_resume_complete, timeout_val)
++					<= 0) {
++			vchiq_log_error(vchiq_susp_log_level, "%s wait for "
++				"resume failed (%s)", __func__,
++				resume_state_names[arm_state->vc_resume_state +
++							VC_RESUME_NUM_OFFSET]);
++			status = VCHIQ_ERROR;
++			write_lock_bh(&arm_state->susp_res_lock);
++			goto out;
++		}
++		vchiq_log_info(vchiq_susp_log_level, "%s resumed", __func__);
++		write_lock_bh(&arm_state->susp_res_lock);
++		resume_count++;
++	}
++	INIT_COMPLETION(arm_state->resume_blocker);
++	arm_state->resume_blocked = 1;
++
++out:
++	return status;
++}
++
++static inline void
++unblock_resume(VCHIQ_ARM_STATE_T *arm_state)
++{
++	complete_all(&arm_state->resume_blocker);
++	arm_state->resume_blocked = 0;
++}
++
++/* Initiate suspend via slot handler. Should be called with the write lock
++ * held */
++VCHIQ_STATUS_T
++vchiq_arm_vcsuspend(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++	status = VCHIQ_SUCCESS;
++
++
++	switch (arm_state->vc_suspend_state) {
++	case VC_SUSPEND_REQUESTED:
++		vchiq_log_info(vchiq_susp_log_level, "%s: suspend already "
++			"requested", __func__);
++		break;
++	case VC_SUSPEND_IN_PROGRESS:
++		vchiq_log_info(vchiq_susp_log_level, "%s: suspend already in "
++			"progress", __func__);
++		break;
++
++	default:
++		/* We don't expect to be in other states, so log but continue
++		 * anyway */
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s unexpected suspend state %s", __func__,
++			suspend_state_names[arm_state->vc_suspend_state +
++						VC_SUSPEND_NUM_OFFSET]);
++		/* fall through */
++	case VC_SUSPEND_REJECTED:
++	case VC_SUSPEND_FAILED:
++		/* Ensure any idle state actions have been run */
++		set_suspend_state(arm_state, VC_SUSPEND_IDLE);
++		/* fall through */
++	case VC_SUSPEND_IDLE:
++		vchiq_log_info(vchiq_susp_log_level,
++			"%s: suspending", __func__);
++		set_suspend_state(arm_state, VC_SUSPEND_REQUESTED);
++		/* kick the slot handler thread to initiate suspend */
++		request_poll(state, NULL, 0);
++		break;
++	}
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, status);
++	return status;
++}
++
++void
++vchiq_platform_check_suspend(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int susp = 0;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	if (arm_state->vc_suspend_state == VC_SUSPEND_REQUESTED &&
++			arm_state->vc_resume_state == VC_RESUME_RESUMED) {
++		set_suspend_state(arm_state, VC_SUSPEND_IN_PROGRESS);
++		susp = 1;
++	}
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++	if (susp)
++		vchiq_platform_suspend(state);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit", __func__);
++	return;
++}
++
++
++static void
++output_timeout_error(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	char service_err[50] = "";
++	int vc_use_count = arm_state->videocore_use_count;
++	int active_services = state->unused_service;
++	int i;
++
++	if (!arm_state->videocore_use_count) {
++		snprintf(service_err, 50, " Videocore usecount is 0");
++		goto output_msg;
++	}
++	for (i = 0; i < active_services; i++) {
++		VCHIQ_SERVICE_T *service_ptr = state->services[i];
++		if (service_ptr && service_ptr->service_use_count &&
++			(service_ptr->srvstate != VCHIQ_SRVSTATE_FREE)) {
++			snprintf(service_err, 50, " %c%c%c%c(%d) service has "
++				"use count %d%s", VCHIQ_FOURCC_AS_4CHARS(
++					service_ptr->base.fourcc),
++				 service_ptr->client_id,
++				 service_ptr->service_use_count,
++				 service_ptr->service_use_count ==
++					 vc_use_count ? "" : " (+ more)");
++			break;
++		}
++	}
++
++output_msg:
++	vchiq_log_error(vchiq_susp_log_level,
++		"timed out waiting for vc suspend (%d).%s",
++		 arm_state->autosuspend_override, service_err);
++
++}
++
++/* Try to get videocore into suspended state, regardless of autosuspend state.
++** We don't actually force suspend, since videocore may get into a bad state
++** if we force suspend at a bad time.  Instead, we wait for autosuspend to
++** determine a good point to suspend.  If this doesn't happen within 100ms we
++** report failure.
++**
++** Returns VCHIQ_SUCCESS if videocore suspended successfully, VCHIQ_RETRY if
++** videocore failed to suspend in time or VCHIQ_ERROR if interrupted.
++*/
++VCHIQ_STATUS_T
++vchiq_arm_force_suspend(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++	long rc = 0;
++	int repeat = -1;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++
++	status = block_resume(arm_state);
++	if (status != VCHIQ_SUCCESS)
++		goto unlock;
++	if (arm_state->vc_suspend_state == VC_SUSPEND_SUSPENDED) {
++		/* Already suspended - just block resume and exit */
++		vchiq_log_info(vchiq_susp_log_level, "%s already suspended",
++			__func__);
++		status = VCHIQ_SUCCESS;
++		goto unlock;
++	} else if (arm_state->vc_suspend_state <= VC_SUSPEND_IDLE) {
++		/* initiate suspend immediately in the case that we're waiting
++		 * for the timeout */
++		stop_suspend_timer(arm_state);
++		if (!vchiq_videocore_wanted(state)) {
++			vchiq_log_info(vchiq_susp_log_level, "%s videocore "
++				"idle, initiating suspend", __func__);
++			status = vchiq_arm_vcsuspend(state);
++		} else if (arm_state->autosuspend_override <
++						FORCE_SUSPEND_FAIL_MAX) {
++			vchiq_log_info(vchiq_susp_log_level, "%s letting "
++				"videocore go idle", __func__);
++			status = VCHIQ_SUCCESS;
++		} else {
++			vchiq_log_warning(vchiq_susp_log_level, "%s failed too "
++				"many times - attempting suspend", __func__);
++			status = vchiq_arm_vcsuspend(state);
++		}
++	} else {
++		vchiq_log_info(vchiq_susp_log_level, "%s videocore suspend "
++			"in progress - wait for completion", __func__);
++		status = VCHIQ_SUCCESS;
++	}
++
++	/* Wait for suspend to happen due to system idle (not forced..) */
++	if (status != VCHIQ_SUCCESS)
++		goto unblock_resume;
++
++	do {
++		write_unlock_bh(&arm_state->susp_res_lock);
++
++		rc = wait_for_completion_interruptible_timeout(
++				&arm_state->vc_suspend_complete,
++				msecs_to_jiffies(FORCE_SUSPEND_TIMEOUT_MS));
++
++		write_lock_bh(&arm_state->susp_res_lock);
++		if (rc < 0) {
++			vchiq_log_warning(vchiq_susp_log_level, "%s "
++				"interrupted waiting for suspend", __func__);
++			status = VCHIQ_ERROR;
++			goto unblock_resume;
++		} else if (rc == 0) {
++			if (arm_state->vc_suspend_state > VC_SUSPEND_IDLE) {
++				/* Repeat timeout once if in progress */
++				if (repeat < 0) {
++					repeat = 1;
++					continue;
++				}
++			}
++			arm_state->autosuspend_override++;
++			output_timeout_error(state);
++
++			status = VCHIQ_RETRY;
++			goto unblock_resume;
++		}
++	} while (0 < (repeat--));
++
++	/* Check and report state in case we need to abort ARM suspend */
++	if (arm_state->vc_suspend_state != VC_SUSPEND_SUSPENDED) {
++		status = VCHIQ_RETRY;
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s videocore suspend failed (state %s)", __func__,
++			suspend_state_names[arm_state->vc_suspend_state +
++						VC_SUSPEND_NUM_OFFSET]);
++		/* Reset the state only if it's still in an error state.
++		 * Something could have already initiated another suspend. */
++		if (arm_state->vc_suspend_state < VC_SUSPEND_IDLE)
++			set_suspend_state(arm_state, VC_SUSPEND_IDLE);
++
++		goto unblock_resume;
++	}
++
++	/* successfully suspended - unlock and exit */
++	goto unlock;
++
++unblock_resume:
++	/* all error states need to unblock resume before exit */
++	unblock_resume(arm_state);
++
++unlock:
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, status);
++	return status;
++}
++
++void
++vchiq_check_suspend(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	if (arm_state->vc_suspend_state != VC_SUSPEND_SUSPENDED &&
++			arm_state->first_connect &&
++			!vchiq_videocore_wanted(state)) {
++		vchiq_arm_vcsuspend(state);
++	}
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit", __func__);
++	return;
++}
++
++
++int
++vchiq_arm_allow_resume(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int resume = 0;
++	int ret = -1;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	unblock_resume(arm_state);
++	resume = vchiq_check_resume(state);
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++	if (resume) {
++		if (wait_for_completion_interruptible(
++			&arm_state->vc_resume_complete) < 0) {
++			vchiq_log_error(vchiq_susp_log_level,
++				"%s interrupted", __func__);
++			/* failed, cannot accurately derive suspend
++			 * state, so exit early. */
++			goto out;
++		}
++	}
++
++	read_lock_bh(&arm_state->susp_res_lock);
++	if (arm_state->vc_suspend_state == VC_SUSPEND_SUSPENDED) {
++		vchiq_log_info(vchiq_susp_log_level,
++				"%s: Videocore remains suspended", __func__);
++	} else {
++		vchiq_log_info(vchiq_susp_log_level,
++				"%s: Videocore resumed", __func__);
++		ret = 0;
++	}
++	read_unlock_bh(&arm_state->susp_res_lock);
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, ret);
++	return ret;
++}
++
++/* This function should be called with the write lock held */
++int
++vchiq_check_resume(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int resume = 0;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	if (need_resume(state)) {
++		set_resume_state(arm_state, VC_RESUME_REQUESTED);
++		request_poll(state, NULL, 0);
++		resume = 1;
++	}
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit", __func__);
++	return resume;
++}
++
++void
++vchiq_platform_check_resume(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int res = 0;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	if (arm_state->wake_address == 0) {
++		vchiq_log_info(vchiq_susp_log_level,
++					"%s: already awake", __func__);
++		goto unlock;
++	}
++	if (arm_state->vc_resume_state == VC_RESUME_IN_PROGRESS) {
++		vchiq_log_info(vchiq_susp_log_level,
++					"%s: already resuming", __func__);
++		goto unlock;
++	}
++
++	if (arm_state->vc_resume_state == VC_RESUME_REQUESTED) {
++		set_resume_state(arm_state, VC_RESUME_IN_PROGRESS);
++		res = 1;
++	} else
++		vchiq_log_trace(vchiq_susp_log_level,
++				"%s: not resuming (resume state %s)", __func__,
++				resume_state_names[arm_state->vc_resume_state +
++							VC_RESUME_NUM_OFFSET]);
++
++unlock:
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++	if (res)
++		vchiq_platform_resume(state);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit", __func__);
++	return;
++
++}
++
++
++
++VCHIQ_STATUS_T
++vchiq_use_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service,
++		enum USE_TYPE_E use_type)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	VCHIQ_STATUS_T ret = VCHIQ_SUCCESS;
++	char entity[16];
++	int *entity_uc;
++	int local_uc, local_entity_uc;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	if (use_type == USE_TYPE_VCHIQ) {
++		sprintf(entity, "VCHIQ:   ");
++		entity_uc = &arm_state->peer_use_count;
++	} else if (service) {
++		sprintf(entity, "%c%c%c%c:%03d",
++			VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++			service->client_id);
++		entity_uc = &service->service_use_count;
++	} else {
++		vchiq_log_error(vchiq_susp_log_level, "%s null service "
++				"ptr", __func__);
++		ret = VCHIQ_ERROR;
++		goto out;
++	}
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	while (arm_state->resume_blocked) {
++		/* If we call 'use' while force suspend is waiting for suspend,
++		 * then we're about to block the thread which the force is
++		 * waiting to complete, so we're bound to just time out. In this
++		 * case, set the suspend state such that the wait will be
++		 * canceled, so we can complete as quickly as possible. */
++		if (arm_state->resume_blocked && arm_state->vc_suspend_state ==
++				VC_SUSPEND_IDLE) {
++			set_suspend_state(arm_state, VC_SUSPEND_FORCE_CANCELED);
++			break;
++		}
++		/* If suspend is already in progress then we need to block */
++		if (!try_wait_for_completion(&arm_state->resume_blocker)) {
++			/* Indicate that there are threads waiting on the resume
++			 * blocker.  These need to be allowed to complete before
++			 * a _second_ call to force suspend can complete,
++			 * otherwise low priority threads might never actually
++			 * continue */
++			arm_state->blocked_count++;
++			write_unlock_bh(&arm_state->susp_res_lock);
++			vchiq_log_info(vchiq_susp_log_level, "%s %s resume "
++				"blocked - waiting...", __func__, entity);
++			if (wait_for_completion_killable(
++					&arm_state->resume_blocker) != 0) {
++				vchiq_log_error(vchiq_susp_log_level, "%s %s "
++					"wait for resume blocker interrupted",
++					__func__, entity);
++				ret = VCHIQ_ERROR;
++				write_lock_bh(&arm_state->susp_res_lock);
++				arm_state->blocked_count--;
++				write_unlock_bh(&arm_state->susp_res_lock);
++				goto out;
++			}
++			vchiq_log_info(vchiq_susp_log_level, "%s %s resume "
++				"unblocked", __func__, entity);
++			write_lock_bh(&arm_state->susp_res_lock);
++			if (--arm_state->blocked_count == 0)
++				complete_all(&arm_state->blocked_blocker);
++		}
++	}
++
++	stop_suspend_timer(arm_state);
++
++	local_uc = ++arm_state->videocore_use_count;
++	local_entity_uc = ++(*entity_uc);
++
++	/* If there's a pending request which hasn't yet been serviced then
++	 * just clear it.  If we're past VC_SUSPEND_REQUESTED state then
++	 * vc_resume_complete will block until we either resume or fail to
++	 * suspend */
++	if (arm_state->vc_suspend_state <= VC_SUSPEND_REQUESTED)
++		set_suspend_state(arm_state, VC_SUSPEND_IDLE);
++
++	if ((use_type != USE_TYPE_SERVICE_NO_RESUME) && need_resume(state)) {
++		set_resume_state(arm_state, VC_RESUME_REQUESTED);
++		vchiq_log_info(vchiq_susp_log_level,
++			"%s %s count %d, state count %d",
++			__func__, entity, local_entity_uc, local_uc);
++		request_poll(state, NULL, 0);
++	} else
++		vchiq_log_trace(vchiq_susp_log_level,
++			"%s %s count %d, state count %d",
++			__func__, entity, *entity_uc, local_uc);
++
++
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++	/* Completion is in a done state when we're not suspended, so this won't
++	 * block for the non-suspended case. */
++	if (!try_wait_for_completion(&arm_state->vc_resume_complete)) {
++		vchiq_log_info(vchiq_susp_log_level, "%s %s wait for resume",
++			__func__, entity);
++		if (wait_for_completion_killable(
++				&arm_state->vc_resume_complete) != 0) {
++			vchiq_log_error(vchiq_susp_log_level, "%s %s wait for "
++				"resume interrupted", __func__, entity);
++			ret = VCHIQ_ERROR;
++			goto out;
++		}
++		vchiq_log_info(vchiq_susp_log_level, "%s %s resumed", __func__,
++			entity);
++	}
++
++	if (ret == VCHIQ_SUCCESS) {
++		VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++		long ack_cnt = atomic_xchg(&arm_state->ka_use_ack_count, 0);
++		while (ack_cnt && (status == VCHIQ_SUCCESS)) {
++			/* Send the use notify to videocore */
++			status = vchiq_send_remote_use_active(state);
++			if (status == VCHIQ_SUCCESS)
++				ack_cnt--;
++			else
++				atomic_add(ack_cnt,
++					&arm_state->ka_use_ack_count);
++		}
++	}
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, ret);
++	return ret;
++}
++
++VCHIQ_STATUS_T
++vchiq_release_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	VCHIQ_STATUS_T ret = VCHIQ_SUCCESS;
++	char entity[16];
++	int *entity_uc;
++	int local_uc, local_entity_uc;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	if (service) {
++		sprintf(entity, "%c%c%c%c:%03d",
++			VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++			service->client_id);
++		entity_uc = &service->service_use_count;
++	} else {
++		sprintf(entity, "PEER:   ");
++		entity_uc = &arm_state->peer_use_count;
++	}
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	if (!arm_state->videocore_use_count || !(*entity_uc)) {
++		/* Don't use BUG_ON - don't allow user thread to crash kernel */
++		WARN_ON(!arm_state->videocore_use_count);
++		WARN_ON(!(*entity_uc));
++		ret = VCHIQ_ERROR;
++		goto unlock;
++	}
++	local_uc = --arm_state->videocore_use_count;
++	local_entity_uc = --(*entity_uc);
++
++	if (!vchiq_videocore_wanted(state)) {
++		if (vchiq_platform_use_suspend_timer() &&
++				!arm_state->resume_blocked) {
++			/* Only use the timer if we're not trying to force
++			 * suspend (=> resume_blocked) */
++			start_suspend_timer(arm_state);
++		} else {
++			vchiq_log_info(vchiq_susp_log_level,
++				"%s %s count %d, state count %d - suspending",
++				__func__, entity, *entity_uc,
++				arm_state->videocore_use_count);
++			vchiq_arm_vcsuspend(state);
++		}
++	} else
++		vchiq_log_trace(vchiq_susp_log_level,
++			"%s %s count %d, state count %d",
++			__func__, entity, *entity_uc,
++			arm_state->videocore_use_count);
++
++unlock:
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, ret);
++	return ret;
++}
++
++void
++vchiq_on_remote_use(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++	atomic_inc(&arm_state->ka_use_count);
++	complete(&arm_state->ka_evt);
++}
++
++void
++vchiq_on_remote_release(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++	atomic_inc(&arm_state->ka_release_count);
++	complete(&arm_state->ka_evt);
++}
++
++VCHIQ_STATUS_T
++vchiq_use_service_internal(VCHIQ_SERVICE_T *service)
++{
++	return vchiq_use_internal(service->state, service, USE_TYPE_SERVICE);
++}
++
++VCHIQ_STATUS_T
++vchiq_release_service_internal(VCHIQ_SERVICE_T *service)
++{
++	return vchiq_release_internal(service->state, service);
++}
++
++static void suspend_timer_callback(unsigned long context)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *)context;
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	if (!arm_state)
++		goto out;
++	vchiq_log_info(vchiq_susp_log_level,
++		"%s - suspend timer expired - check suspend", __func__);
++	vchiq_check_suspend(state);
++out:
++	return;
++}
++
++VCHIQ_STATUS_T
++vchiq_use_service_no_resume(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_STATUS_T ret = VCHIQ_ERROR;
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	if (service) {
++		ret = vchiq_use_internal(service->state, service,
++				USE_TYPE_SERVICE_NO_RESUME);
++		unlock_service(service);
++	}
++	return ret;
++}
++
++VCHIQ_STATUS_T
++vchiq_use_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_STATUS_T ret = VCHIQ_ERROR;
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	if (service) {
++		ret = vchiq_use_internal(service->state, service,
++				USE_TYPE_SERVICE);
++		unlock_service(service);
++	}
++	return ret;
++}
++
++VCHIQ_STATUS_T
++vchiq_release_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_STATUS_T ret = VCHIQ_ERROR;
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	if (service) {
++		ret = vchiq_release_internal(service->state, service);
++		unlock_service(service);
++	}
++	return ret;
++}
++
++void
++vchiq_dump_service_use_state(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int i, j = 0;
++	/* Only dump 64 services */
++	static const int local_max_services = 64;
++	/* If there's more than 64 services, only dump ones with
++	 * non-zero counts */
++	int only_nonzero = 0;
++	static const char *nz = "<-- preventing suspend";
++
++	enum vc_suspend_status vc_suspend_state;
++	enum vc_resume_status  vc_resume_state;
++	int peer_count;
++	int vc_use_count;
++	int active_services;
++	struct service_data_struct {
++		int fourcc;
++		int clientid;
++		int use_count;
++	} service_data[local_max_services];
++
++	if (!arm_state)
++		return;
++
++	read_lock_bh(&arm_state->susp_res_lock);
++	vc_suspend_state = arm_state->vc_suspend_state;
++	vc_resume_state  = arm_state->vc_resume_state;
++	peer_count = arm_state->peer_use_count;
++	vc_use_count = arm_state->videocore_use_count;
++	active_services = state->unused_service;
++	if (active_services > local_max_services)
++		only_nonzero = 1;
++
++	for (i = 0; (i < active_services) && (j < local_max_services); i++) {
++		VCHIQ_SERVICE_T *service_ptr = state->services[i];
++		if (!service_ptr)
++			continue;
++
++		if (only_nonzero && !service_ptr->service_use_count)
++			continue;
++
++		if (service_ptr->srvstate != VCHIQ_SRVSTATE_FREE) {
++			service_data[j].fourcc = service_ptr->base.fourcc;
++			service_data[j].clientid = service_ptr->client_id;
++			service_data[j++].use_count = service_ptr->
++							service_use_count;
++		}
++	}
++
++	read_unlock_bh(&arm_state->susp_res_lock);
++
++	vchiq_log_warning(vchiq_susp_log_level,
++		"-- Videcore suspend state: %s --",
++		suspend_state_names[vc_suspend_state + VC_SUSPEND_NUM_OFFSET]);
++	vchiq_log_warning(vchiq_susp_log_level,
++		"-- Videcore resume state: %s --",
++		resume_state_names[vc_resume_state + VC_RESUME_NUM_OFFSET]);
++
++	if (only_nonzero)
++		vchiq_log_warning(vchiq_susp_log_level, "Too many active "
++			"services (%d).  Only dumping up to first %d services "
++			"with non-zero use-count", active_services,
++			local_max_services);
++
++	for (i = 0; i < j; i++) {
++		vchiq_log_warning(vchiq_susp_log_level,
++			"----- %c%c%c%c:%d service count %d %s",
++			VCHIQ_FOURCC_AS_4CHARS(service_data[i].fourcc),
++			service_data[i].clientid,
++			service_data[i].use_count,
++			service_data[i].use_count ? nz : "");
++	}
++	vchiq_log_warning(vchiq_susp_log_level,
++		"----- VCHIQ use count count %d", peer_count);
++	vchiq_log_warning(vchiq_susp_log_level,
++		"--- Overall vchiq instance use count %d", vc_use_count);
++
++	vchiq_dump_platform_use_state(state);
++}
++
++VCHIQ_STATUS_T
++vchiq_check_service(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_ARM_STATE_T *arm_state;
++	VCHIQ_STATUS_T ret = VCHIQ_ERROR;
++
++	if (!service || !service->state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	arm_state = vchiq_platform_get_arm_state(service->state);
++
++	read_lock_bh(&arm_state->susp_res_lock);
++	if (service->service_use_count)
++		ret = VCHIQ_SUCCESS;
++	read_unlock_bh(&arm_state->susp_res_lock);
++
++	if (ret == VCHIQ_ERROR) {
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s ERROR - %c%c%c%c:%d service count %d, "
++			"state count %d, videocore suspend state %s", __func__,
++			VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++			service->client_id, service->service_use_count,
++			arm_state->videocore_use_count,
++			suspend_state_names[arm_state->vc_suspend_state +
++						VC_SUSPEND_NUM_OFFSET]);
++		vchiq_dump_service_use_state(service->state);
++	}
++out:
++	return ret;
++}
++
++/* stub functions */
++void vchiq_on_remote_use_active(VCHIQ_STATE_T *state)
++{
++	(void)state;
++}
++
++void vchiq_platform_conn_state_changed(VCHIQ_STATE_T *state,
++	VCHIQ_CONNSTATE_T oldstate, VCHIQ_CONNSTATE_T newstate)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	vchiq_log_info(vchiq_susp_log_level, "%d: %s->%s", state->id,
++		get_conn_state_name(oldstate), get_conn_state_name(newstate));
++	if (state->conn_state == VCHIQ_CONNSTATE_CONNECTED) {
++		write_lock_bh(&arm_state->susp_res_lock);
++		if (!arm_state->first_connect) {
++			char threadname[10];
++			arm_state->first_connect = 1;
++			write_unlock_bh(&arm_state->susp_res_lock);
++			snprintf(threadname, sizeof(threadname), "VCHIQka-%d",
++				state->id);
++			arm_state->ka_thread = kthread_create(
++				&vchiq_keepalive_thread_func,
++				(void *)state,
++				threadname);
++			if (arm_state->ka_thread == NULL) {
++				vchiq_log_error(vchiq_susp_log_level,
++					"vchiq: FATAL: couldn't create thread %s",
++					threadname);
++			} else {
++				wake_up_process(arm_state->ka_thread);
++			}
++		} else
++			write_unlock_bh(&arm_state->susp_res_lock);
++	}
++}
++
++
++/****************************************************************************
++*
++*   vchiq_init - called when the module is loaded.
++*
++***************************************************************************/
++
++static int __init
++vchiq_init(void)
++{
++	int err;
++	void *ptr_err;
++
++	/* create proc entries */
++	err = vchiq_proc_init();
++	if (err != 0)
++		goto failed_proc_init;
++
++	err = alloc_chrdev_region(&vchiq_devid, VCHIQ_MINOR, 1, DEVICE_NAME);
++	if (err != 0) {
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unable to allocate device number");
++		goto failed_alloc_chrdev;
++	}
++	cdev_init(&vchiq_cdev, &vchiq_fops);
++	vchiq_cdev.owner = THIS_MODULE;
++	err = cdev_add(&vchiq_cdev, vchiq_devid, 1);
++	if (err != 0) {
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unable to register device");
++		goto failed_cdev_add;
++	}
++
++	/* create sysfs entries */
++	vchiq_class = class_create(THIS_MODULE, DEVICE_NAME);
++	ptr_err = vchiq_class;
++	if (IS_ERR(ptr_err))
++		goto failed_class_create;
++
++	vchiq_dev = device_create(vchiq_class, NULL,
++		vchiq_devid, NULL, "vchiq");
++	ptr_err = vchiq_dev;
++	if (IS_ERR(ptr_err))
++		goto failed_device_create;
++
++	err = vchiq_platform_init(&g_state);
++	if (err != 0)
++		goto failed_platform_init;
++
++	vchiq_log_info(vchiq_arm_log_level,
++		"vchiq: initialised - version %d (min %d), device %d.%d",
++		VCHIQ_VERSION, VCHIQ_VERSION_MIN,
++		MAJOR(vchiq_devid), MINOR(vchiq_devid));
++
++	return 0;
++
++failed_platform_init:
++	device_destroy(vchiq_class, vchiq_devid);
++failed_device_create:
++	class_destroy(vchiq_class);
++failed_class_create:
++	cdev_del(&vchiq_cdev);
++	err = PTR_ERR(ptr_err);
++failed_cdev_add:
++	unregister_chrdev_region(vchiq_devid, 1);
++failed_alloc_chrdev:
++	vchiq_proc_deinit();
++failed_proc_init:
++	vchiq_log_warning(vchiq_arm_log_level, "could not load vchiq");
++	return err;
++}
++
++static int vchiq_instance_get_use_count(VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_SERVICE_T *service;
++	int use_count = 0, i;
++	i = 0;
++	while ((service = next_service_by_instance(instance->state,
++		instance, &i)) != NULL) {
++		use_count += service->service_use_count;
++		unlock_service(service);
++	}
++	return use_count;
++}
++
++/* read the per-process use-count */
++static int proc_read_use_count(char *page, char **start,
++			       off_t off, int count,
++			       int *eof, void *data)
++{
++	VCHIQ_INSTANCE_T instance = data;
++	int len, use_count;
++
++	use_count = vchiq_instance_get_use_count(instance);
++	len = snprintf(page+off, count, "%d\n", use_count);
++
++	return len;
++}
++
++/* add an instance (process) to the proc entries */
++static int vchiq_proc_add_instance(VCHIQ_INSTANCE_T instance)
++{
++	char pidstr[32];
++	struct proc_dir_entry *top, *use_count;
++	struct proc_dir_entry *clients = vchiq_clients_top();
++	int pid = instance->pid;
++
++	snprintf(pidstr, sizeof(pidstr), "%d", pid);
++	top = proc_mkdir(pidstr, clients);
++	if (!top)
++		goto fail_top;
++#if 0
++	use_count = create_proc_read_entry("use_count",
++					   0444, top,
++					   proc_read_use_count,
++					   instance);
++	if (!use_count)
++		goto fail_use_count;
++
++	instance->proc_entry = top;
++#endif
++	return 0;
++
++fail_use_count:
++#if 0
++	remove_proc_entry(top->name, clients);
++#endif
++fail_top:
++	return -ENOMEM;
++}
++
++static void vchiq_proc_remove_instance(VCHIQ_INSTANCE_T instance)
++{
++#if 0
++	struct proc_dir_entry *clients = vchiq_clients_top();
++	remove_proc_entry("use_count", instance->proc_entry);
++	remove_proc_entry(instance->proc_entry->name, clients);
++#endif
++}
++
++/****************************************************************************
++*
++*   vchiq_exit - called when the module is unloaded.
++*
++***************************************************************************/
++
++static void __exit
++vchiq_exit(void)
++{
++	vchiq_platform_exit(&g_state);
++	device_destroy(vchiq_class, vchiq_devid);
++	class_destroy(vchiq_class);
++	cdev_del(&vchiq_cdev);
++	unregister_chrdev_region(vchiq_devid, 1);
++}
++
++module_init(vchiq_init);
++module_exit(vchiq_exit);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Broadcom Corporation");
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,212 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_ARM_H
++#define VCHIQ_ARM_H
++
++#include <linux/mutex.h>
++#include <linux/semaphore.h>
++#include <linux/atomic.h>
++#include "vchiq_core.h"
++
++
++enum vc_suspend_status {
++	VC_SUSPEND_FORCE_CANCELED = -3, /* Force suspend canceled, too busy */
++	VC_SUSPEND_REJECTED = -2,  /* Videocore rejected suspend request */
++	VC_SUSPEND_FAILED = -1,    /* Videocore suspend failed */
++	VC_SUSPEND_IDLE = 0,       /* VC active, no suspend actions */
++	VC_SUSPEND_REQUESTED,      /* User has requested suspend */
++	VC_SUSPEND_IN_PROGRESS,    /* Slot handler has recvd suspend request */
++	VC_SUSPEND_SUSPENDED       /* Videocore suspend succeeded */
++};
++
++enum vc_resume_status {
++	VC_RESUME_FAILED = -1, /* Videocore resume failed */
++	VC_RESUME_IDLE = 0,    /* VC suspended, no resume actions */
++	VC_RESUME_REQUESTED,   /* User has requested resume */
++	VC_RESUME_IN_PROGRESS, /* Slot handler has received resume request */
++	VC_RESUME_RESUMED      /* Videocore resumed successfully (active) */
++};
++
++
++enum USE_TYPE_E {
++	USE_TYPE_SERVICE,
++	USE_TYPE_SERVICE_NO_RESUME,
++	USE_TYPE_VCHIQ
++};
++
++
++
++typedef struct vchiq_arm_state_struct {
++	/* Keepalive-related data */
++	struct task_struct *ka_thread;
++	struct completion ka_evt;
++	atomic_t ka_use_count;
++	atomic_t ka_use_ack_count;
++	atomic_t ka_release_count;
++
++	struct completion vc_suspend_complete;
++	struct completion vc_resume_complete;
++
++	rwlock_t susp_res_lock;
++	enum vc_suspend_status vc_suspend_state;
++	enum vc_resume_status vc_resume_state;
++
++	unsigned int wake_address;
++
++	struct timer_list suspend_timer;
++	int suspend_timer_timeout;
++	int suspend_timer_running;
++
++	/* Global use count for videocore.
++	** This is equal to the sum of the use counts for all services.  When
++	** this hits zero the videocore suspend procedure will be initiated.
++	*/
++	int videocore_use_count;
++
++	/* Use count to track requests from videocore peer.
++	** This use count is not associated with a service, so needs to be
++	** tracked separately with the state.
++	*/
++	int peer_use_count;
++
++	/* Flag to indicate whether resume is blocked.  This happens when the
++	** ARM is suspending
++	*/
++	struct completion resume_blocker;
++	int resume_blocked;
++	struct completion blocked_blocker;
++	int blocked_count;
++
++	int autosuspend_override;
++
++	/* Flag to indicate that the first vchiq connect has made it through.
++	** This means that both sides should be fully ready, and we should
++	** be able to suspend after this point.
++	*/
++	int first_connect;
++
++	unsigned long long suspend_start_time;
++	unsigned long long sleep_start_time;
++	unsigned long long resume_start_time;
++	unsigned long long last_wake_time;
++
++} VCHIQ_ARM_STATE_T;
++
++extern int vchiq_arm_log_level;
++extern int vchiq_susp_log_level;
++
++extern int __init
++vchiq_platform_init(VCHIQ_STATE_T *state);
++
++extern void __exit
++vchiq_platform_exit(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATE_T *
++vchiq_get_state(void);
++
++extern VCHIQ_STATUS_T
++vchiq_arm_vcsuspend(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_arm_force_suspend(VCHIQ_STATE_T *state);
++
++extern int
++vchiq_arm_allow_resume(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_arm_vcresume(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_arm_init_state(VCHIQ_STATE_T *state, VCHIQ_ARM_STATE_T *arm_state);
++
++extern int
++vchiq_check_resume(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_check_suspend(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_use_service(VCHIQ_SERVICE_HANDLE_T handle);
++
++extern VCHIQ_STATUS_T
++vchiq_release_service(VCHIQ_SERVICE_HANDLE_T handle);
++
++extern VCHIQ_STATUS_T
++vchiq_check_service(VCHIQ_SERVICE_T *service);
++
++extern VCHIQ_STATUS_T
++vchiq_platform_suspend(VCHIQ_STATE_T *state);
++
++extern int
++vchiq_platform_videocore_wanted(VCHIQ_STATE_T *state);
++
++extern int
++vchiq_platform_use_suspend_timer(void);
++
++extern void
++vchiq_dump_platform_use_state(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_dump_service_use_state(VCHIQ_STATE_T *state);
++
++extern VCHIQ_ARM_STATE_T*
++vchiq_platform_get_arm_state(VCHIQ_STATE_T *state);
++
++extern int
++vchiq_videocore_wanted(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_use_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service,
++		enum USE_TYPE_E use_type);
++extern VCHIQ_STATUS_T
++vchiq_release_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service);
++
++void
++set_suspend_state(VCHIQ_ARM_STATE_T *arm_state,
++	enum vc_suspend_status new_state);
++
++void
++set_resume_state(VCHIQ_ARM_STATE_T *arm_state,
++	enum vc_resume_status new_state);
++
++void
++start_suspend_timer(VCHIQ_ARM_STATE_T *arm_state);
++
++extern int vchiq_proc_init(void);
++extern void vchiq_proc_deinit(void);
++extern struct proc_dir_entry *vchiq_proc_top(void);
++extern struct proc_dir_entry *vchiq_clients_top(void);
++
++
++#endif /* VCHIQ_ARM_H */
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,37 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++const char *vchiq_get_build_hostname(void);
++const char *vchiq_get_build_version(void);
++const char *vchiq_get_build_time(void);
++const char *vchiq_get_build_date(void);
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,60 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_CFG_H
++#define VCHIQ_CFG_H
++
++#define VCHIQ_MAGIC              VCHIQ_MAKE_FOURCC('V', 'C', 'H', 'I')
++/* The version of VCHIQ - change with any non-trivial change */
++#define VCHIQ_VERSION            6
++/* The minimum compatible version - update to match VCHIQ_VERSION with any
++** incompatible change */
++#define VCHIQ_VERSION_MIN        3
++
++#define VCHIQ_MAX_STATES         1
++#define VCHIQ_MAX_SERVICES       4096
++#define VCHIQ_MAX_SLOTS          128
++#define VCHIQ_MAX_SLOTS_PER_SIDE 64
++
++#define VCHIQ_NUM_CURRENT_BULKS        32
++#define VCHIQ_NUM_SERVICE_BULKS        4
++
++#ifndef VCHIQ_ENABLE_DEBUG
++#define VCHIQ_ENABLE_DEBUG             1
++#endif
++
++#ifndef VCHIQ_ENABLE_STATS
++#define VCHIQ_ENABLE_STATS             1
++#endif
++
++#endif /* VCHIQ_CFG_H */
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,119 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include "vchiq_connected.h"
++#include "vchiq_core.h"
++#include <linux/module.h>
++#include <linux/mutex.h>
++
++#define  MAX_CALLBACKS  10
++
++static   int                        g_connected;
++static   int                        g_num_deferred_callbacks;
++static   VCHIQ_CONNECTED_CALLBACK_T g_deferred_callback[MAX_CALLBACKS];
++static   int                        g_once_init;
++static   struct mutex               g_connected_mutex;
++
++/****************************************************************************
++*
++* Function to initialize our lock.
++*
++***************************************************************************/
++
++static void connected_init(void)
++{
++	if (!g_once_init) {
++		mutex_init(&g_connected_mutex);
++		g_once_init = 1;
++	}
++}
++
++/****************************************************************************
++*
++* This function is used to defer initialization until the vchiq stack is
++* initialized. If the stack is already initialized, then the callback will
++* be made immediately, otherwise it will be deferred until
++* vchiq_call_connected_callbacks is called.
++*
++***************************************************************************/
++
++void vchiq_add_connected_callback(VCHIQ_CONNECTED_CALLBACK_T callback)
++{
++	connected_init();
++
++	if (mutex_lock_interruptible(&g_connected_mutex) != 0)
++		return;
++
++	if (g_connected)
++		/* We're already connected. Call the callback immediately. */
++
++		callback();
++	else {
++		if (g_num_deferred_callbacks >= MAX_CALLBACKS)
++			vchiq_log_error(vchiq_core_log_level,
++				"There already %d callback registered - "
++				"please increase MAX_CALLBACKS",
++				g_num_deferred_callbacks);
++		else {
++			g_deferred_callback[g_num_deferred_callbacks] =
++				callback;
++			g_num_deferred_callbacks++;
++		}
++	}
++	mutex_unlock(&g_connected_mutex);
++}
++
++/****************************************************************************
++*
++* This function is called by the vchiq stack once it has been connected to
++* the videocore and clients can start to use the stack.
++*
++***************************************************************************/
++
++void vchiq_call_connected_callbacks(void)
++{
++	int i;
++
++	connected_init();
++
++	if (mutex_lock_interruptible(&g_connected_mutex) != 0)
++		return;
++
++	for (i = 0; i <  g_num_deferred_callbacks; i++)
++		g_deferred_callback[i]();
++
++	g_num_deferred_callbacks = 0;
++	g_connected = 1;
++	mutex_unlock(&g_connected_mutex);
++}
++EXPORT_SYMBOL(vchiq_add_connected_callback);
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,51 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_CONNECTED_H
++#define VCHIQ_CONNECTED_H
++
++/* ---- Include Files ----------------------------------------------------- */
++
++/* ---- Constants and Types ---------------------------------------------- */
++
++typedef void (*VCHIQ_CONNECTED_CALLBACK_T)(void);
++
++/* ---- Variable Externs ------------------------------------------------- */
++
++/* ---- Function Prototypes ---------------------------------------------- */
++
++void vchiq_add_connected_callback(VCHIQ_CONNECTED_CALLBACK_T callback);
++void vchiq_call_connected_callbacks(void);
++
++#endif /* VCHIQ_CONNECTED_H */
++
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,3818 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include "vchiq_core.h"
++
++#define VCHIQ_SLOT_HANDLER_STACK 8192
++
++#define HANDLE_STATE_SHIFT 12
++
++#define SLOT_INFO_FROM_INDEX(state, index) (state->slot_info + (index))
++#define SLOT_DATA_FROM_INDEX(state, index) (state->slot_data + (index))
++#define SLOT_INDEX_FROM_DATA(state, data) \
++	(((unsigned int)((char *)data - (char *)state->slot_data)) / \
++	VCHIQ_SLOT_SIZE)
++#define SLOT_INDEX_FROM_INFO(state, info) \
++	((unsigned int)(info - state->slot_info))
++#define SLOT_QUEUE_INDEX_FROM_POS(pos) \
++	((int)((unsigned int)(pos) / VCHIQ_SLOT_SIZE))
++
++
++#define BULK_INDEX(x) (x & (VCHIQ_NUM_SERVICE_BULKS - 1))
++
++
++struct vchiq_open_payload {
++	int fourcc;
++	int client_id;
++	short version;
++	short version_min;
++};
++
++struct vchiq_openack_payload {
++	short version;
++};
++
++/* we require this for consistency between endpoints */
++vchiq_static_assert(sizeof(VCHIQ_HEADER_T) == 8);
++vchiq_static_assert(IS_POW2(sizeof(VCHIQ_HEADER_T)));
++vchiq_static_assert(IS_POW2(VCHIQ_NUM_CURRENT_BULKS));
++vchiq_static_assert(IS_POW2(VCHIQ_NUM_SERVICE_BULKS));
++vchiq_static_assert(IS_POW2(VCHIQ_MAX_SERVICES));
++vchiq_static_assert(VCHIQ_VERSION >= VCHIQ_VERSION_MIN);
++
++/* Run time control of log level, based on KERN_XXX level. */
++int vchiq_core_log_level = VCHIQ_LOG_DEFAULT;
++int vchiq_core_msg_log_level = VCHIQ_LOG_DEFAULT;
++int vchiq_sync_log_level = VCHIQ_LOG_DEFAULT;
++
++static atomic_t pause_bulks_count = ATOMIC_INIT(0);
++
++static DEFINE_SPINLOCK(service_spinlock);
++DEFINE_SPINLOCK(bulk_waiter_spinlock);
++DEFINE_SPINLOCK(quota_spinlock);
++
++VCHIQ_STATE_T *vchiq_states[VCHIQ_MAX_STATES];
++static unsigned int handle_seq;
++
++static const char *const srvstate_names[] = {
++	"FREE",
++	"HIDDEN",
++	"LISTENING",
++	"OPENING",
++	"OPEN",
++	"OPENSYNC",
++	"CLOSESENT",
++	"CLOSERECVD",
++	"CLOSEWAIT",
++	"CLOSED"
++};
++
++static const char *const reason_names[] = {
++	"SERVICE_OPENED",
++	"SERVICE_CLOSED",
++	"MESSAGE_AVAILABLE",
++	"BULK_TRANSMIT_DONE",
++	"BULK_RECEIVE_DONE",
++	"BULK_TRANSMIT_ABORTED",
++	"BULK_RECEIVE_ABORTED"
++};
++
++static const char *const conn_state_names[] = {
++	"DISCONNECTED",
++	"CONNECTING",
++	"CONNECTED",
++	"PAUSING",
++	"PAUSE_SENT",
++	"PAUSED",
++	"RESUMING",
++	"PAUSE_TIMEOUT",
++	"RESUME_TIMEOUT"
++};
++
++
++static void
++release_message_sync(VCHIQ_STATE_T *state, VCHIQ_HEADER_T *header);
++
++static const char *msg_type_str(unsigned int msg_type)
++{
++	switch (msg_type) {
++	case VCHIQ_MSG_PADDING:       return "PADDING";
++	case VCHIQ_MSG_CONNECT:       return "CONNECT";
++	case VCHIQ_MSG_OPEN:          return "OPEN";
++	case VCHIQ_MSG_OPENACK:       return "OPENACK";
++	case VCHIQ_MSG_CLOSE:         return "CLOSE";
++	case VCHIQ_MSG_DATA:          return "DATA";
++	case VCHIQ_MSG_BULK_RX:       return "BULK_RX";
++	case VCHIQ_MSG_BULK_TX:       return "BULK_TX";
++	case VCHIQ_MSG_BULK_RX_DONE:  return "BULK_RX_DONE";
++	case VCHIQ_MSG_BULK_TX_DONE:  return "BULK_TX_DONE";
++	case VCHIQ_MSG_PAUSE:         return "PAUSE";
++	case VCHIQ_MSG_RESUME:        return "RESUME";
++	case VCHIQ_MSG_REMOTE_USE:    return "REMOTE_USE";
++	case VCHIQ_MSG_REMOTE_RELEASE:      return "REMOTE_RELEASE";
++	case VCHIQ_MSG_REMOTE_USE_ACTIVE:   return "REMOTE_USE_ACTIVE";
++	}
++	return "???";
++}
++
++static inline void
++vchiq_set_service_state(VCHIQ_SERVICE_T *service, int newstate)
++{
++	vchiq_log_info(vchiq_core_log_level, "%d: srv:%d %s->%s",
++		service->state->id, service->localport,
++		srvstate_names[service->srvstate],
++		srvstate_names[newstate]);
++	service->srvstate = newstate;
++}
++
++VCHIQ_SERVICE_T *
++find_service_by_handle(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_SERVICE_T *service;
++
++	spin_lock(&service_spinlock);
++	service = handle_to_service(handle);
++	if (service && (service->srvstate != VCHIQ_SRVSTATE_FREE) &&
++		(service->handle == handle)) {
++		BUG_ON(service->ref_count == 0);
++		service->ref_count++;
++	} else
++		service = NULL;
++	spin_unlock(&service_spinlock);
++
++	if (!service)
++		vchiq_log_info(vchiq_core_log_level,
++			"Invalid service handle 0x%x", handle);
++
++	return service;
++}
++
++VCHIQ_SERVICE_T *
++find_service_by_port(VCHIQ_STATE_T *state, int localport)
++{
++	VCHIQ_SERVICE_T *service = NULL;
++	if ((unsigned int)localport <= VCHIQ_PORT_MAX) {
++		spin_lock(&service_spinlock);
++		service = state->services[localport];
++		if (service && (service->srvstate != VCHIQ_SRVSTATE_FREE)) {
++			BUG_ON(service->ref_count == 0);
++			service->ref_count++;
++		} else
++			service = NULL;
++		spin_unlock(&service_spinlock);
++	}
++
++	if (!service)
++		vchiq_log_info(vchiq_core_log_level,
++			"Invalid port %d", localport);
++
++	return service;
++}
++
++VCHIQ_SERVICE_T *
++find_service_for_instance(VCHIQ_INSTANCE_T instance,
++	VCHIQ_SERVICE_HANDLE_T handle) {
++	VCHIQ_SERVICE_T *service;
++
++	spin_lock(&service_spinlock);
++	service = handle_to_service(handle);
++	if (service && (service->srvstate != VCHIQ_SRVSTATE_FREE) &&
++		(service->handle == handle) &&
++		(service->instance == instance)) {
++		BUG_ON(service->ref_count == 0);
++		service->ref_count++;
++	} else
++		service = NULL;
++	spin_unlock(&service_spinlock);
++
++	if (!service)
++		vchiq_log_info(vchiq_core_log_level,
++			"Invalid service handle 0x%x", handle);
++
++	return service;
++}
++
++VCHIQ_SERVICE_T *
++next_service_by_instance(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance,
++	int *pidx)
++{
++	VCHIQ_SERVICE_T *service = NULL;
++	int idx = *pidx;
++
++	spin_lock(&service_spinlock);
++	while (idx < state->unused_service) {
++		VCHIQ_SERVICE_T *srv = state->services[idx++];
++		if (srv && (srv->srvstate != VCHIQ_SRVSTATE_FREE) &&
++			(srv->instance == instance)) {
++			service = srv;
++			BUG_ON(service->ref_count == 0);
++			service->ref_count++;
++			break;
++		}
++	}
++	spin_unlock(&service_spinlock);
++
++	*pidx = idx;
++
++	return service;
++}
++
++void
++lock_service(VCHIQ_SERVICE_T *service)
++{
++	spin_lock(&service_spinlock);
++	BUG_ON(!service || (service->ref_count == 0));
++	if (service)
++		service->ref_count++;
++	spin_unlock(&service_spinlock);
++}
++
++void
++unlock_service(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATE_T *state = service->state;
++	spin_lock(&service_spinlock);
++	BUG_ON(!service || (service->ref_count == 0));
++	if (service && service->ref_count) {
++		service->ref_count--;
++		if (!service->ref_count) {
++			BUG_ON(service->srvstate != VCHIQ_SRVSTATE_FREE);
++			state->services[service->localport] = NULL;
++		} else
++			service = NULL;
++	}
++	spin_unlock(&service_spinlock);
++
++	kfree(service);
++}
++
++int
++vchiq_get_client_id(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	int id;
++
++	id = service ? service->client_id : 0;
++	if (service)
++		unlock_service(service);
++
++	return id;
++}
++
++void *
++vchiq_get_service_userdata(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_SERVICE_T *service = handle_to_service(handle);
++
++	return service ? service->base.userdata : NULL;
++}
++
++int
++vchiq_get_service_fourcc(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_SERVICE_T *service = handle_to_service(handle);
++
++	return service ? service->base.fourcc : 0;
++}
++
++static void
++mark_service_closing_internal(VCHIQ_SERVICE_T *service, int sh_thread)
++{
++	VCHIQ_STATE_T *state = service->state;
++	VCHIQ_SERVICE_QUOTA_T *service_quota;
++
++	service->closing = 1;
++
++	/* Synchronise with other threads. */
++	mutex_lock(&state->recycle_mutex);
++	mutex_unlock(&state->recycle_mutex);
++	if (!sh_thread || (state->conn_state != VCHIQ_CONNSTATE_PAUSE_SENT)) {
++		/* If we're pausing then the slot_mutex is held until resume
++		 * by the slot handler.  Therefore don't try to acquire this
++		 * mutex if we're the slot handler and in the pause sent state.
++		 * We don't need to in this case anyway. */
++		mutex_lock(&state->slot_mutex);
++		mutex_unlock(&state->slot_mutex);
++	}
++
++	/* Unblock any sending thread. */
++	service_quota = &state->service_quotas[service->localport];
++	up(&service_quota->quota_event);
++}
++
++static void
++mark_service_closing(VCHIQ_SERVICE_T *service)
++{
++	mark_service_closing_internal(service, 0);
++}
++
++static inline VCHIQ_STATUS_T
++make_service_callback(VCHIQ_SERVICE_T *service, VCHIQ_REASON_T reason,
++	VCHIQ_HEADER_T *header, void *bulk_userdata)
++{
++	VCHIQ_STATUS_T status;
++	vchiq_log_trace(vchiq_core_log_level, "%d: callback:%d (%s, %x, %x)",
++		service->state->id, service->localport, reason_names[reason],
++		(unsigned int)header, (unsigned int)bulk_userdata);
++	status = service->base.callback(reason, header, service->handle,
++		bulk_userdata);
++	if (status == VCHIQ_ERROR) {
++		vchiq_log_warning(vchiq_core_log_level,
++			"%d: ignoring ERROR from callback to service %x",
++			service->state->id, service->handle);
++		status = VCHIQ_SUCCESS;
++	}
++	return status;
++}
++
++inline void
++vchiq_set_conn_state(VCHIQ_STATE_T *state, VCHIQ_CONNSTATE_T newstate)
++{
++	VCHIQ_CONNSTATE_T oldstate = state->conn_state;
++	vchiq_log_info(vchiq_core_log_level, "%d: %s->%s", state->id,
++		conn_state_names[oldstate],
++		conn_state_names[newstate]);
++	state->conn_state = newstate;
++	vchiq_platform_conn_state_changed(state, oldstate, newstate);
++}
++
++static inline void
++remote_event_create(REMOTE_EVENT_T *event)
++{
++	event->armed = 0;
++	/* Don't clear the 'fired' flag because it may already have been set
++	** by the other side. */
++	sema_init(event->event, 0);
++}
++
++static inline void
++remote_event_destroy(REMOTE_EVENT_T *event)
++{
++	(void)event;
++}
++
++static inline int
++remote_event_wait(REMOTE_EVENT_T *event)
++{
++	if (!event->fired) {
++		event->armed = 1;
++		dsb();
++		if (!event->fired) {
++			if (down_interruptible(event->event) != 0) {
++				event->armed = 0;
++				return 0;
++			}
++		}
++		event->armed = 0;
++		wmb();
++	}
++
++	event->fired = 0;
++	return 1;
++}
++
++static inline void
++remote_event_signal_local(REMOTE_EVENT_T *event)
++{
++	event->armed = 0;
++	up(event->event);
++}
++
++static inline void
++remote_event_poll(REMOTE_EVENT_T *event)
++{
++	if (event->fired && event->armed)
++		remote_event_signal_local(event);
++}
++
++void
++remote_event_pollall(VCHIQ_STATE_T *state)
++{
++	remote_event_poll(&state->local->sync_trigger);
++	remote_event_poll(&state->local->sync_release);
++	remote_event_poll(&state->local->trigger);
++	remote_event_poll(&state->local->recycle);
++}
++
++/* Round up message sizes so that any space at the end of a slot is always big
++** enough for a header. This relies on header size being a power of two, which
++** has been verified earlier by a static assertion. */
++
++static inline unsigned int
++calc_stride(unsigned int size)
++{
++	/* Allow room for the header */
++	size += sizeof(VCHIQ_HEADER_T);
++
++	/* Round up */
++	return (size + sizeof(VCHIQ_HEADER_T) - 1) & ~(sizeof(VCHIQ_HEADER_T)
++		- 1);
++}
++
++/* Called by the slot handler thread */
++static VCHIQ_SERVICE_T *
++get_listening_service(VCHIQ_STATE_T *state, int fourcc)
++{
++	int i;
++
++	WARN_ON(fourcc == VCHIQ_FOURCC_INVALID);
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		if (service &&
++			(service->public_fourcc == fourcc) &&
++			((service->srvstate == VCHIQ_SRVSTATE_LISTENING) ||
++			((service->srvstate == VCHIQ_SRVSTATE_OPEN) &&
++			(service->remoteport == VCHIQ_PORT_FREE)))) {
++			lock_service(service);
++			return service;
++		}
++	}
++
++	return NULL;
++}
++
++/* Called by the slot handler thread */
++static VCHIQ_SERVICE_T *
++get_connected_service(VCHIQ_STATE_T *state, unsigned int port)
++{
++	int i;
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		if (service && (service->srvstate == VCHIQ_SRVSTATE_OPEN)
++			&& (service->remoteport == port)) {
++			lock_service(service);
++			return service;
++		}
++	}
++	return NULL;
++}
++
++inline void
++request_poll(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service, int poll_type)
++{
++	uint32_t value;
++
++	if (service) {
++		do {
++			value = atomic_read(&service->poll_flags);
++		} while (atomic_cmpxchg(&service->poll_flags, value,
++			value | (1 << poll_type)) != value);
++
++		do {
++			value = atomic_read(&state->poll_services[
++				service->localport>>5]);
++		} while (atomic_cmpxchg(
++			&state->poll_services[service->localport>>5],
++			value, value | (1 << (service->localport & 0x1f)))
++			!= value);
++	}
++
++	state->poll_needed = 1;
++	wmb();
++
++	/* ... and ensure the slot handler runs. */
++	remote_event_signal_local(&state->local->trigger);
++}
++
++/* Called from queue_message, by the slot handler and application threads,
++** with slot_mutex held */
++static VCHIQ_HEADER_T *
++reserve_space(VCHIQ_STATE_T *state, int space, int is_blocking)
++{
++	VCHIQ_SHARED_STATE_T *local = state->local;
++	int tx_pos = state->local_tx_pos;
++	int slot_space = VCHIQ_SLOT_SIZE - (tx_pos & VCHIQ_SLOT_MASK);
++
++	if (space > slot_space) {
++		VCHIQ_HEADER_T *header;
++		/* Fill the remaining space with padding */
++		WARN_ON(state->tx_data == NULL);
++		header = (VCHIQ_HEADER_T *)
++			(state->tx_data + (tx_pos & VCHIQ_SLOT_MASK));
++		header->msgid = VCHIQ_MSGID_PADDING;
++		header->size = slot_space - sizeof(VCHIQ_HEADER_T);
++
++		tx_pos += slot_space;
++	}
++
++	/* If necessary, get the next slot. */
++	if ((tx_pos & VCHIQ_SLOT_MASK) == 0) {
++		int slot_index;
++
++		/* If there is no free slot... */
++
++		if (down_trylock(&state->slot_available_event) != 0) {
++			/* ...wait for one. */
++
++			VCHIQ_STATS_INC(state, slot_stalls);
++
++			/* But first, flush through the last slot. */
++			state->local_tx_pos = tx_pos;
++			local->tx_pos = tx_pos;
++			remote_event_signal(&state->remote->trigger);
++
++			if (!is_blocking ||
++				(down_interruptible(
++				&state->slot_available_event) != 0))
++				return NULL; /* No space available */
++		}
++
++		BUG_ON(tx_pos ==
++			(state->slot_queue_available * VCHIQ_SLOT_SIZE));
++
++		slot_index = local->slot_queue[
++			SLOT_QUEUE_INDEX_FROM_POS(tx_pos) &
++			VCHIQ_SLOT_QUEUE_MASK];
++		state->tx_data =
++			(char *)SLOT_DATA_FROM_INDEX(state, slot_index);
++	}
++
++	state->local_tx_pos = tx_pos + space;
++
++	return (VCHIQ_HEADER_T *)(state->tx_data + (tx_pos & VCHIQ_SLOT_MASK));
++}
++
++/* Called by the recycle thread. */
++static void
++process_free_queue(VCHIQ_STATE_T *state)
++{
++	VCHIQ_SHARED_STATE_T *local = state->local;
++	BITSET_T service_found[BITSET_SIZE(VCHIQ_MAX_SERVICES)];
++	int slot_queue_available;
++
++	/* Use a read memory barrier to ensure that any state that may have
++	** been modified by another thread is not masked by stale prefetched
++	** values. */
++	rmb();
++
++	/* Find slots which have been freed by the other side, and return them
++	** to the available queue. */
++	slot_queue_available = state->slot_queue_available;
++
++	while (slot_queue_available != local->slot_queue_recycle) {
++		unsigned int pos;
++		int slot_index = local->slot_queue[slot_queue_available++ &
++			VCHIQ_SLOT_QUEUE_MASK];
++		char *data = (char *)SLOT_DATA_FROM_INDEX(state, slot_index);
++		int data_found = 0;
++
++		vchiq_log_trace(vchiq_core_log_level, "%d: pfq %d=%x %x %x",
++			state->id, slot_index, (unsigned int)data,
++			local->slot_queue_recycle, slot_queue_available);
++
++		/* Initialise the bitmask for services which have used this
++		** slot */
++		BITSET_ZERO(service_found);
++
++		pos = 0;
++
++		while (pos < VCHIQ_SLOT_SIZE) {
++			VCHIQ_HEADER_T *header =
++				(VCHIQ_HEADER_T *)(data + pos);
++			int msgid = header->msgid;
++			if (VCHIQ_MSG_TYPE(msgid) == VCHIQ_MSG_DATA) {
++				int port = VCHIQ_MSG_SRCPORT(msgid);
++				VCHIQ_SERVICE_QUOTA_T *service_quota =
++					&state->service_quotas[port];
++				int count;
++				spin_lock(&quota_spinlock);
++				count = service_quota->message_use_count;
++				if (count > 0)
++					service_quota->message_use_count =
++						count - 1;
++				spin_unlock(&quota_spinlock);
++
++				if (count == service_quota->message_quota)
++					/* Signal the service that it
++					** has dropped below its quota
++					*/
++					up(&service_quota->quota_event);
++				else if (count == 0) {
++					vchiq_log_error(vchiq_core_log_level,
++						"service %d "
++						"message_use_count=%d "
++						"(header %x, msgid %x, "
++						"header->msgid %x, "
++						"header->size %x)",
++						port,
++						service_quota->
++							message_use_count,
++						(unsigned int)header, msgid,
++						header->msgid,
++						header->size);
++					WARN(1, "invalid message use count\n");
++				}
++				if (!BITSET_IS_SET(service_found, port)) {
++					/* Set the found bit for this service */
++					BITSET_SET(service_found, port);
++
++					spin_lock(&quota_spinlock);
++					count = service_quota->slot_use_count;
++					if (count > 0)
++						service_quota->slot_use_count =
++							count - 1;
++					spin_unlock(&quota_spinlock);
++
++					if (count > 0) {
++						/* Signal the service in case
++						** it has dropped below its
++						** quota */
++						up(&service_quota->quota_event);
++						vchiq_log_trace(
++							vchiq_core_log_level,
++							"%d: pfq:%d %x@%x - "
++							"slot_use->%d",
++							state->id, port,
++							header->size,
++							(unsigned int)header,
++							count - 1);
++					} else {
++						vchiq_log_error(
++							vchiq_core_log_level,
++								"service %d "
++								"slot_use_count"
++								"=%d (header %x"
++								", msgid %x, "
++								"header->msgid"
++								" %x, header->"
++								"size %x)",
++							port, count,
++							(unsigned int)header,
++							msgid,
++							header->msgid,
++							header->size);
++						WARN(1, "bad slot use count\n");
++					}
++				}
++
++				data_found = 1;
++			}
++
++			pos += calc_stride(header->size);
++			if (pos > VCHIQ_SLOT_SIZE) {
++				vchiq_log_error(vchiq_core_log_level,
++					"pfq - pos %x: header %x, msgid %x, "
++					"header->msgid %x, header->size %x",
++					pos, (unsigned int)header, msgid,
++					header->msgid, header->size);
++				WARN(1, "invalid slot position\n");
++			}
++		}
++
++		if (data_found) {
++			int count;
++			spin_lock(&quota_spinlock);
++			count = state->data_use_count;
++			if (count > 0)
++				state->data_use_count =
++					count - 1;
++			spin_unlock(&quota_spinlock);
++			if (count == state->data_quota)
++				up(&state->data_quota_event);
++		}
++
++		state->slot_queue_available = slot_queue_available;
++		up(&state->slot_available_event);
++	}
++}
++
++/* Called by the slot handler and application threads */
++static VCHIQ_STATUS_T
++queue_message(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service,
++	int msgid, const VCHIQ_ELEMENT_T *elements,
++	int count, int size, int is_blocking)
++{
++	VCHIQ_SHARED_STATE_T *local;
++	VCHIQ_SERVICE_QUOTA_T *service_quota = NULL;
++	VCHIQ_HEADER_T *header;
++	int type = VCHIQ_MSG_TYPE(msgid);
++
++	unsigned int stride;
++
++	local = state->local;
++
++	stride = calc_stride(size);
++
++	WARN_ON(!(stride <= VCHIQ_SLOT_SIZE));
++
++	if ((type != VCHIQ_MSG_RESUME) &&
++		(mutex_lock_interruptible(&state->slot_mutex) != 0))
++		return VCHIQ_RETRY;
++
++	if (type == VCHIQ_MSG_DATA) {
++		int tx_end_index;
++
++		BUG_ON(!service);
++
++		if (service->closing) {
++			/* The service has been closed */
++			mutex_unlock(&state->slot_mutex);
++			return VCHIQ_ERROR;
++		}
++
++		service_quota = &state->service_quotas[service->localport];
++
++		spin_lock(&quota_spinlock);
++
++		/* Ensure this service doesn't use more than its quota of
++		** messages or slots */
++		tx_end_index = SLOT_QUEUE_INDEX_FROM_POS(
++			state->local_tx_pos + stride - 1);
++
++		/* Ensure data messages don't use more than their quota of
++		** slots */
++		while ((tx_end_index != state->previous_data_index) &&
++			(state->data_use_count == state->data_quota)) {
++			VCHIQ_STATS_INC(state, data_stalls);
++			spin_unlock(&quota_spinlock);
++			mutex_unlock(&state->slot_mutex);
++
++			if (down_interruptible(&state->data_quota_event)
++				!= 0)
++				return VCHIQ_RETRY;
++
++			mutex_lock(&state->slot_mutex);
++			spin_lock(&quota_spinlock);
++			tx_end_index = SLOT_QUEUE_INDEX_FROM_POS(
++				state->local_tx_pos + stride - 1);
++			if ((tx_end_index == state->previous_data_index) ||
++				(state->data_use_count < state->data_quota)) {
++				/* Pass the signal on to other waiters */
++				up(&state->data_quota_event);
++				break;
++			}
++		}
++
++		while ((service_quota->message_use_count ==
++				service_quota->message_quota) ||
++			((tx_end_index != service_quota->previous_tx_index) &&
++			(service_quota->slot_use_count ==
++				service_quota->slot_quota))) {
++			spin_unlock(&quota_spinlock);
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: qm:%d %s,%x - quota stall "
++				"(msg %d, slot %d)",
++				state->id, service->localport,
++				msg_type_str(type), size,
++				service_quota->message_use_count,
++				service_quota->slot_use_count);
++			VCHIQ_SERVICE_STATS_INC(service, quota_stalls);
++			mutex_unlock(&state->slot_mutex);
++			if (down_interruptible(&service_quota->quota_event)
++				!= 0)
++				return VCHIQ_RETRY;
++			if (service->closing)
++				return VCHIQ_ERROR;
++			if (mutex_lock_interruptible(&state->slot_mutex) != 0)
++				return VCHIQ_RETRY;
++			if (service->srvstate != VCHIQ_SRVSTATE_OPEN) {
++				/* The service has been closed */
++				mutex_unlock(&state->slot_mutex);
++				return VCHIQ_ERROR;
++			}
++			spin_lock(&quota_spinlock);
++			tx_end_index = SLOT_QUEUE_INDEX_FROM_POS(
++				state->local_tx_pos + stride - 1);
++		}
++
++		spin_unlock(&quota_spinlock);
++	}
++
++	header = reserve_space(state, stride, is_blocking);
++
++	if (!header) {
++		if (service)
++			VCHIQ_SERVICE_STATS_INC(service, slot_stalls);
++		mutex_unlock(&state->slot_mutex);
++		return VCHIQ_RETRY;
++	}
++
++	if (type == VCHIQ_MSG_DATA) {
++		int i, pos;
++		int tx_end_index;
++		int slot_use_count;
++
++		vchiq_log_info(vchiq_core_log_level,
++			"%d: qm %s@%x,%x (%d->%d)",
++			state->id,
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			(unsigned int)header, size,
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid));
++
++		BUG_ON(!service);
++
++		for (i = 0, pos = 0; i < (unsigned int)count;
++			pos += elements[i++].size)
++			if (elements[i].size) {
++				if (vchiq_copy_from_user
++					(header->data + pos, elements[i].data,
++					(size_t) elements[i].size) !=
++					VCHIQ_SUCCESS) {
++					mutex_unlock(&state->slot_mutex);
++					VCHIQ_SERVICE_STATS_INC(service,
++						error_count);
++					return VCHIQ_ERROR;
++				}
++				if (i == 0) {
++					if (vchiq_core_msg_log_level >=
++						VCHIQ_LOG_INFO)
++						vchiq_log_dump_mem("Sent", 0,
++							header->data + pos,
++							min(64u,
++							elements[0].size));
++				}
++			}
++
++		spin_lock(&quota_spinlock);
++		service_quota->message_use_count++;
++
++		tx_end_index =
++			SLOT_QUEUE_INDEX_FROM_POS(state->local_tx_pos - 1);
++
++		/* If this transmission can't fit in the last slot used by any
++		** service, the data_use_count must be increased. */
++		if (tx_end_index != state->previous_data_index) {
++			state->previous_data_index = tx_end_index;
++			state->data_use_count++;
++		}
++
++		/* If this isn't the same slot last used by this service,
++		** the service's slot_use_count must be increased. */
++		if (tx_end_index != service_quota->previous_tx_index) {
++			service_quota->previous_tx_index = tx_end_index;
++			slot_use_count = ++service_quota->slot_use_count;
++		} else {
++			slot_use_count = 0;
++		}
++
++		spin_unlock(&quota_spinlock);
++
++		if (slot_use_count)
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: qm:%d %s,%x - slot_use->%d (hdr %p)",
++				state->id, service->localport,
++				msg_type_str(VCHIQ_MSG_TYPE(msgid)), size,
++				slot_use_count, header);
++
++		VCHIQ_SERVICE_STATS_INC(service, ctrl_tx_count);
++		VCHIQ_SERVICE_STATS_ADD(service, ctrl_tx_bytes, size);
++	} else {
++		vchiq_log_info(vchiq_core_log_level,
++			"%d: qm %s@%x,%x (%d->%d)", state->id,
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			(unsigned int)header, size,
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid));
++		if (size != 0) {
++			WARN_ON(!((count == 1) && (size == elements[0].size)));
++			memcpy(header->data, elements[0].data,
++				elements[0].size);
++		}
++		VCHIQ_STATS_INC(state, ctrl_tx_count);
++	}
++
++	header->msgid = msgid;
++	header->size = size;
++
++	{
++		int svc_fourcc;
++
++		svc_fourcc = service
++			? service->base.fourcc
++			: VCHIQ_MAKE_FOURCC('?', '?', '?', '?');
++
++		vchiq_log_info(vchiq_core_msg_log_level,
++			"Sent Msg %s(%u) to %c%c%c%c s:%u d:%d len:%d",
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			VCHIQ_MSG_TYPE(msgid),
++			VCHIQ_FOURCC_AS_4CHARS(svc_fourcc),
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid),
++			size);
++	}
++
++	/* Make sure the new header is visible to the peer. */
++	wmb();
++
++	/* Make the new tx_pos visible to the peer. */
++	local->tx_pos = state->local_tx_pos;
++	wmb();
++
++	if (service && (type == VCHIQ_MSG_CLOSE))
++		vchiq_set_service_state(service, VCHIQ_SRVSTATE_CLOSESENT);
++
++	if (VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_PAUSE)
++		mutex_unlock(&state->slot_mutex);
++
++	remote_event_signal(&state->remote->trigger);
++
++	return VCHIQ_SUCCESS;
++}
++
++/* Called by the slot handler and application threads */
++static VCHIQ_STATUS_T
++queue_message_sync(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service,
++	int msgid, const VCHIQ_ELEMENT_T *elements,
++	int count, int size, int is_blocking)
++{
++	VCHIQ_SHARED_STATE_T *local;
++	VCHIQ_HEADER_T *header;
++
++	local = state->local;
++
++	if ((VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_RESUME) &&
++		(mutex_lock_interruptible(&state->sync_mutex) != 0))
++		return VCHIQ_RETRY;
++
++	remote_event_wait(&local->sync_release);
++
++	rmb();
++
++	header = (VCHIQ_HEADER_T *)SLOT_DATA_FROM_INDEX(state,
++		local->slot_sync);
++
++	{
++		int oldmsgid = header->msgid;
++		if (oldmsgid != VCHIQ_MSGID_PADDING)
++			vchiq_log_error(vchiq_core_log_level,
++				"%d: qms - msgid %x, not PADDING",
++				state->id, oldmsgid);
++	}
++
++	if (service) {
++		int i, pos;
++
++		vchiq_log_info(vchiq_sync_log_level,
++			"%d: qms %s@%x,%x (%d->%d)", state->id,
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			(unsigned int)header, size,
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid));
++
++		for (i = 0, pos = 0; i < (unsigned int)count;
++			pos += elements[i++].size)
++			if (elements[i].size) {
++				if (vchiq_copy_from_user
++					(header->data + pos, elements[i].data,
++					(size_t) elements[i].size) !=
++					VCHIQ_SUCCESS) {
++					mutex_unlock(&state->sync_mutex);
++					VCHIQ_SERVICE_STATS_INC(service,
++						error_count);
++					return VCHIQ_ERROR;
++				}
++				if (i == 0) {
++					if (vchiq_sync_log_level >=
++						VCHIQ_LOG_TRACE)
++						vchiq_log_dump_mem("Sent Sync",
++							0, header->data + pos,
++							min(64u,
++							elements[0].size));
++				}
++			}
++
++		VCHIQ_SERVICE_STATS_INC(service, ctrl_tx_count);
++		VCHIQ_SERVICE_STATS_ADD(service, ctrl_tx_bytes, size);
++	} else {
++		vchiq_log_info(vchiq_sync_log_level,
++			"%d: qms %s@%x,%x (%d->%d)", state->id,
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			(unsigned int)header, size,
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid));
++		if (size != 0) {
++			WARN_ON(!((count == 1) && (size == elements[0].size)));
++			memcpy(header->data, elements[0].data,
++				elements[0].size);
++		}
++		VCHIQ_STATS_INC(state, ctrl_tx_count);
++	}
++
++	header->size = size;
++	header->msgid = msgid;
++
++	if (vchiq_sync_log_level >= VCHIQ_LOG_TRACE) {
++		int svc_fourcc;
++
++		svc_fourcc = service
++			? service->base.fourcc
++			: VCHIQ_MAKE_FOURCC('?', '?', '?', '?');
++
++		vchiq_log_trace(vchiq_sync_log_level,
++			"Sent Sync Msg %s(%u) to %c%c%c%c s:%u d:%d len:%d",
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			VCHIQ_MSG_TYPE(msgid),
++			VCHIQ_FOURCC_AS_4CHARS(svc_fourcc),
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid),
++			size);
++	}
++
++	/* Make sure the new header is visible to the peer. */
++	wmb();
++
++	remote_event_signal(&state->remote->sync_trigger);
++
++	if (VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_PAUSE)
++		mutex_unlock(&state->sync_mutex);
++
++	return VCHIQ_SUCCESS;
++}
++
++static inline void
++claim_slot(VCHIQ_SLOT_INFO_T *slot)
++{
++	slot->use_count++;
++}
++
++static void
++release_slot(VCHIQ_STATE_T *state, VCHIQ_SLOT_INFO_T *slot_info,
++	VCHIQ_HEADER_T *header, VCHIQ_SERVICE_T *service)
++{
++	int release_count;
++
++	mutex_lock(&state->recycle_mutex);
++
++	if (header) {
++		int msgid = header->msgid;
++		if (((msgid & VCHIQ_MSGID_CLAIMED) == 0) ||
++			(service && service->closing)) {
++			mutex_unlock(&state->recycle_mutex);
++			return;
++		}
++
++		/* Rewrite the message header to prevent a double
++		** release */
++		header->msgid = msgid & ~VCHIQ_MSGID_CLAIMED;
++	}
++
++	release_count = slot_info->release_count;
++	slot_info->release_count = ++release_count;
++
++	if (release_count == slot_info->use_count) {
++		int slot_queue_recycle;
++		/* Add to the freed queue */
++
++		/* A read barrier is necessary here to prevent speculative
++		** fetches of remote->slot_queue_recycle from overtaking the
++		** mutex. */
++		rmb();
++
++		slot_queue_recycle = state->remote->slot_queue_recycle;
++		state->remote->slot_queue[slot_queue_recycle &
++			VCHIQ_SLOT_QUEUE_MASK] =
++			SLOT_INDEX_FROM_INFO(state, slot_info);
++		state->remote->slot_queue_recycle = slot_queue_recycle + 1;
++		vchiq_log_info(vchiq_core_log_level,
++			"%d: release_slot %d - recycle->%x",
++			state->id, SLOT_INDEX_FROM_INFO(state, slot_info),
++			state->remote->slot_queue_recycle);
++
++		/* A write barrier is necessary, but remote_event_signal
++		** contains one. */
++		remote_event_signal(&state->remote->recycle);
++	}
++
++	mutex_unlock(&state->recycle_mutex);
++}
++
++/* Called by the slot handler - don't hold the bulk mutex */
++static VCHIQ_STATUS_T
++notify_bulks(VCHIQ_SERVICE_T *service, VCHIQ_BULK_QUEUE_T *queue,
++	int retry_poll)
++{
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%d: nb:%d %cx - p=%x rn=%x r=%x",
++		service->state->id, service->localport,
++		(queue == &service->bulk_tx) ? 't' : 'r',
++		queue->process, queue->remote_notify, queue->remove);
++
++	if (service->state->is_master) {
++		while (queue->remote_notify != queue->process) {
++			VCHIQ_BULK_T *bulk =
++				&queue->bulks[BULK_INDEX(queue->remote_notify)];
++			int msgtype = (bulk->dir == VCHIQ_BULK_TRANSMIT) ?
++				VCHIQ_MSG_BULK_RX_DONE : VCHIQ_MSG_BULK_TX_DONE;
++			int msgid = VCHIQ_MAKE_MSG(msgtype, service->localport,
++				service->remoteport);
++			VCHIQ_ELEMENT_T element = { &bulk->actual, 4 };
++			/* Only reply to non-dummy bulk requests */
++			if (bulk->remote_data) {
++				status = queue_message(service->state, NULL,
++					msgid, &element, 1, 4, 0);
++				if (status != VCHIQ_SUCCESS)
++					break;
++			}
++			queue->remote_notify++;
++		}
++	} else {
++		queue->remote_notify = queue->process;
++	}
++
++	if (status == VCHIQ_SUCCESS) {
++		while (queue->remove != queue->remote_notify) {
++			VCHIQ_BULK_T *bulk =
++				&queue->bulks[BULK_INDEX(queue->remove)];
++
++			/* Only generate callbacks for non-dummy bulk
++			** requests, and non-terminated services */
++			if (bulk->data && service->instance) {
++				if (bulk->actual != VCHIQ_BULK_ACTUAL_ABORTED) {
++					if (bulk->dir == VCHIQ_BULK_TRANSMIT) {
++						VCHIQ_SERVICE_STATS_INC(service,
++							bulk_tx_count);
++						VCHIQ_SERVICE_STATS_ADD(service,
++							bulk_tx_bytes,
++							bulk->actual);
++					} else {
++						VCHIQ_SERVICE_STATS_INC(service,
++							bulk_rx_count);
++						VCHIQ_SERVICE_STATS_ADD(service,
++							bulk_rx_bytes,
++							bulk->actual);
++					}
++				} else {
++					VCHIQ_SERVICE_STATS_INC(service,
++						bulk_aborted_count);
++				}
++				if (bulk->mode == VCHIQ_BULK_MODE_BLOCKING) {
++					struct bulk_waiter *waiter;
++					spin_lock(&bulk_waiter_spinlock);
++					waiter = bulk->userdata;
++					if (waiter) {
++						waiter->actual = bulk->actual;
++						up(&waiter->event);
++					}
++					spin_unlock(&bulk_waiter_spinlock);
++				} else if (bulk->mode ==
++					VCHIQ_BULK_MODE_CALLBACK) {
++					VCHIQ_REASON_T reason = (bulk->dir ==
++						VCHIQ_BULK_TRANSMIT) ?
++						((bulk->actual ==
++						VCHIQ_BULK_ACTUAL_ABORTED) ?
++						VCHIQ_BULK_TRANSMIT_ABORTED :
++						VCHIQ_BULK_TRANSMIT_DONE) :
++						((bulk->actual ==
++						VCHIQ_BULK_ACTUAL_ABORTED) ?
++						VCHIQ_BULK_RECEIVE_ABORTED :
++						VCHIQ_BULK_RECEIVE_DONE);
++					status = make_service_callback(service,
++						reason,	NULL, bulk->userdata);
++					if (status == VCHIQ_RETRY)
++						break;
++				}
++			}
++
++			queue->remove++;
++			up(&service->bulk_remove_event);
++		}
++		if (!retry_poll)
++			status = VCHIQ_SUCCESS;
++	}
++
++	if (status == VCHIQ_RETRY)
++		request_poll(service->state, service,
++			(queue == &service->bulk_tx) ?
++			VCHIQ_POLL_TXNOTIFY : VCHIQ_POLL_RXNOTIFY);
++
++	return status;
++}
++
++/* Called by the slot handler thread */
++static void
++poll_services(VCHIQ_STATE_T *state)
++{
++	int group, i;
++
++	for (group = 0; group < BITSET_SIZE(state->unused_service); group++) {
++		uint32_t flags;
++		flags = atomic_xchg(&state->poll_services[group], 0);
++		for (i = 0; flags; i++) {
++			if (flags & (1 << i)) {
++				VCHIQ_SERVICE_T *service =
++					find_service_by_port(state,
++						(group<<5) + i);
++				uint32_t service_flags;
++				flags &= ~(1 << i);
++				if (!service)
++					continue;
++				service_flags =
++					atomic_xchg(&service->poll_flags, 0);
++				if (service_flags &
++					(1 << VCHIQ_POLL_REMOVE)) {
++					vchiq_log_info(vchiq_core_log_level,
++						"%d: ps - remove %d<->%d",
++						state->id, service->localport,
++						service->remoteport);
++
++					/* Make it look like a client, because
++					   it must be removed and not left in
++					   the LISTENING state. */
++					service->public_fourcc =
++						VCHIQ_FOURCC_INVALID;
++
++					if (vchiq_close_service_internal(
++						service, 0/*!close_recvd*/) !=
++						VCHIQ_SUCCESS)
++						request_poll(state, service,
++							VCHIQ_POLL_REMOVE);
++				} else if (service_flags &
++					(1 << VCHIQ_POLL_TERMINATE)) {
++					vchiq_log_info(vchiq_core_log_level,
++						"%d: ps - terminate %d<->%d",
++						state->id, service->localport,
++						service->remoteport);
++					if (vchiq_close_service_internal(
++						service, 0/*!close_recvd*/) !=
++						VCHIQ_SUCCESS)
++						request_poll(state, service,
++							VCHIQ_POLL_TERMINATE);
++				}
++				if (service_flags & (1 << VCHIQ_POLL_TXNOTIFY))
++					notify_bulks(service,
++						&service->bulk_tx,
++						1/*retry_poll*/);
++				if (service_flags & (1 << VCHIQ_POLL_RXNOTIFY))
++					notify_bulks(service,
++						&service->bulk_rx,
++						1/*retry_poll*/);
++				unlock_service(service);
++			}
++		}
++	}
++}
++
++/* Called by the slot handler or application threads, holding the bulk mutex. */
++static int
++resolve_bulks(VCHIQ_SERVICE_T *service, VCHIQ_BULK_QUEUE_T *queue)
++{
++	VCHIQ_STATE_T *state = service->state;
++	int resolved = 0;
++	int rc;
++
++	while ((queue->process != queue->local_insert) &&
++		(queue->process != queue->remote_insert)) {
++		VCHIQ_BULK_T *bulk = &queue->bulks[BULK_INDEX(queue->process)];
++
++		vchiq_log_trace(vchiq_core_log_level,
++			"%d: rb:%d %cx - li=%x ri=%x p=%x",
++			state->id, service->localport,
++			(queue == &service->bulk_tx) ? 't' : 'r',
++			queue->local_insert, queue->remote_insert,
++			queue->process);
++
++		WARN_ON(!((int)(queue->local_insert - queue->process) > 0));
++		WARN_ON(!((int)(queue->remote_insert - queue->process) > 0));
++
++		rc = mutex_lock_interruptible(&state->bulk_transfer_mutex);
++		if (rc != 0)
++			break;
++
++		vchiq_transfer_bulk(bulk);
++		mutex_unlock(&state->bulk_transfer_mutex);
++
++		if (vchiq_core_msg_log_level >= VCHIQ_LOG_INFO) {
++			const char *header = (queue == &service->bulk_tx) ?
++				"Send Bulk to" : "Recv Bulk from";
++			if (bulk->actual != VCHIQ_BULK_ACTUAL_ABORTED)
++				vchiq_log_info(vchiq_core_msg_log_level,
++					"%s %c%c%c%c d:%d len:%d %x<->%x",
++					header,
++					VCHIQ_FOURCC_AS_4CHARS(
++						service->base.fourcc),
++					service->remoteport,
++					bulk->size,
++					(unsigned int)bulk->data,
++					(unsigned int)bulk->remote_data);
++			else
++				vchiq_log_info(vchiq_core_msg_log_level,
++					"%s %c%c%c%c d:%d ABORTED - tx len:%d,"
++					" rx len:%d %x<->%x",
++					header,
++					VCHIQ_FOURCC_AS_4CHARS(
++						service->base.fourcc),
++					service->remoteport,
++					bulk->size,
++					bulk->remote_size,
++					(unsigned int)bulk->data,
++					(unsigned int)bulk->remote_data);
++		}
++
++		vchiq_complete_bulk(bulk);
++		queue->process++;
++		resolved++;
++	}
++	return resolved;
++}
++
++/* Called with the bulk_mutex held */
++static void
++abort_outstanding_bulks(VCHIQ_SERVICE_T *service, VCHIQ_BULK_QUEUE_T *queue)
++{
++	int is_tx = (queue == &service->bulk_tx);
++	vchiq_log_trace(vchiq_core_log_level,
++		"%d: aob:%d %cx - li=%x ri=%x p=%x",
++		service->state->id, service->localport, is_tx ? 't' : 'r',
++		queue->local_insert, queue->remote_insert, queue->process);
++
++	WARN_ON(!((int)(queue->local_insert - queue->process) >= 0));
++	WARN_ON(!((int)(queue->remote_insert - queue->process) >= 0));
++
++	while ((queue->process != queue->local_insert) ||
++		(queue->process != queue->remote_insert)) {
++		VCHIQ_BULK_T *bulk = &queue->bulks[BULK_INDEX(queue->process)];
++
++		if (queue->process == queue->remote_insert) {
++			/* fabricate a matching dummy bulk */
++			bulk->remote_data = NULL;
++			bulk->remote_size = 0;
++			queue->remote_insert++;
++		}
++
++		if (queue->process != queue->local_insert) {
++			vchiq_complete_bulk(bulk);
++
++			vchiq_log_info(vchiq_core_msg_log_level,
++				"%s %c%c%c%c d:%d ABORTED - tx len:%d, "
++				"rx len:%d",
++				is_tx ? "Send Bulk to" : "Recv Bulk from",
++				VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++				service->remoteport,
++				bulk->size,
++				bulk->remote_size);
++		} else {
++			/* fabricate a matching dummy bulk */
++			bulk->data = NULL;
++			bulk->size = 0;
++			bulk->actual = VCHIQ_BULK_ACTUAL_ABORTED;
++			bulk->dir = is_tx ? VCHIQ_BULK_TRANSMIT :
++				VCHIQ_BULK_RECEIVE;
++			queue->local_insert++;
++		}
++
++		queue->process++;
++	}
++}
++
++/* Called from the slot handler thread */
++static void
++pause_bulks(VCHIQ_STATE_T *state)
++{
++	if (unlikely(atomic_inc_return(&pause_bulks_count) != 1)) {
++		WARN_ON_ONCE(1);
++		atomic_set(&pause_bulks_count, 1);
++		return;
++	}
++
++	/* Block bulk transfers from all services */
++	mutex_lock(&state->bulk_transfer_mutex);
++}
++
++/* Called from the slot handler thread */
++static void
++resume_bulks(VCHIQ_STATE_T *state)
++{
++	int i;
++	if (unlikely(atomic_dec_return(&pause_bulks_count) != 0)) {
++		WARN_ON_ONCE(1);
++		atomic_set(&pause_bulks_count, 0);
++		return;
++	}
++
++	/* Allow bulk transfers from all services */
++	mutex_unlock(&state->bulk_transfer_mutex);
++
++	if (state->deferred_bulks == 0)
++		return;
++
++	/* Deal with any bulks which had to be deferred due to being in
++	 * paused state.  Don't try to match up to number of deferred bulks
++	 * in case we've had something come and close the service in the
++	 * interim - just process all bulk queues for all services */
++	vchiq_log_info(vchiq_core_log_level, "%s: processing %d deferred bulks",
++		__func__, state->deferred_bulks);
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		int resolved_rx = 0;
++		int resolved_tx = 0;
++		if (!service || (service->srvstate != VCHIQ_SRVSTATE_OPEN))
++			continue;
++
++		mutex_lock(&service->bulk_mutex);
++		resolved_rx = resolve_bulks(service, &service->bulk_rx);
++		resolved_tx = resolve_bulks(service, &service->bulk_tx);
++		mutex_unlock(&service->bulk_mutex);
++		if (resolved_rx)
++			notify_bulks(service, &service->bulk_rx, 1);
++		if (resolved_tx)
++			notify_bulks(service, &service->bulk_tx, 1);
++	}
++	state->deferred_bulks = 0;
++}
++
++static int
++parse_open(VCHIQ_STATE_T *state, VCHIQ_HEADER_T *header)
++{
++	VCHIQ_SERVICE_T *service = NULL;
++	int msgid, size;
++	int type;
++	unsigned int localport, remoteport;
++
++	msgid = header->msgid;
++	size = header->size;
++	type = VCHIQ_MSG_TYPE(msgid);
++	localport = VCHIQ_MSG_DSTPORT(msgid);
++	remoteport = VCHIQ_MSG_SRCPORT(msgid);
++	if (size >= sizeof(struct vchiq_open_payload)) {
++		const struct vchiq_open_payload *payload =
++			(struct vchiq_open_payload *)header->data;
++		unsigned int fourcc;
++
++		fourcc = payload->fourcc;
++		vchiq_log_info(vchiq_core_log_level,
++			"%d: prs OPEN@%x (%d->'%c%c%c%c')",
++			state->id, (unsigned int)header,
++			localport,
++			VCHIQ_FOURCC_AS_4CHARS(fourcc));
++
++		service = get_listening_service(state, fourcc);
++
++		if (service) {
++			/* A matching service exists */
++			short version = payload->version;
++			short version_min = payload->version_min;
++			if ((service->version < version_min) ||
++				(version < service->version_min)) {
++				/* Version mismatch */
++				vchiq_loud_error_header();
++				vchiq_loud_error("%d: service %d (%c%c%c%c) "
++					"version mismatch - local (%d, min %d)"
++					" vs. remote (%d, min %d)",
++					state->id, service->localport,
++					VCHIQ_FOURCC_AS_4CHARS(fourcc),
++					service->version, service->version_min,
++					version, version_min);
++				vchiq_loud_error_footer();
++				unlock_service(service);
++				goto fail_open;
++			}
++			service->peer_version = version;
++
++			if (service->srvstate == VCHIQ_SRVSTATE_LISTENING) {
++				struct vchiq_openack_payload ack_payload = {
++					service->version
++				};
++				VCHIQ_ELEMENT_T body = {
++					&ack_payload,
++					sizeof(ack_payload)
++				};
++
++				/* Acknowledge the OPEN */
++				if (service->sync) {
++					if (queue_message_sync(state, NULL,
++						VCHIQ_MAKE_MSG(
++							VCHIQ_MSG_OPENACK,
++							service->localport,
++							remoteport),
++						&body, 1, sizeof(ack_payload),
++						0) == VCHIQ_RETRY)
++						goto bail_not_ready;
++				} else {
++					if (queue_message(state, NULL,
++						VCHIQ_MAKE_MSG(
++							VCHIQ_MSG_OPENACK,
++							service->localport,
++							remoteport),
++						&body, 1, sizeof(ack_payload),
++						0) == VCHIQ_RETRY)
++						goto bail_not_ready;
++				}
++
++				/* The service is now open */
++				vchiq_set_service_state(service,
++					service->sync ? VCHIQ_SRVSTATE_OPENSYNC
++					: VCHIQ_SRVSTATE_OPEN);
++			}
++
++			service->remoteport = remoteport;
++			service->client_id = ((int *)header->data)[1];
++			if (make_service_callback(service, VCHIQ_SERVICE_OPENED,
++				NULL, NULL) == VCHIQ_RETRY) {
++				/* Bail out if not ready */
++				service->remoteport = VCHIQ_PORT_FREE;
++				goto bail_not_ready;
++			}
++
++			/* Success - the message has been dealt with */
++			unlock_service(service);
++			return 1;
++		}
++	}
++
++fail_open:
++	/* No available service, or an invalid request - send a CLOSE */
++	if (queue_message(state, NULL,
++		VCHIQ_MAKE_MSG(VCHIQ_MSG_CLOSE, 0, VCHIQ_MSG_SRCPORT(msgid)),
++		NULL, 0, 0, 0) == VCHIQ_RETRY)
++		goto bail_not_ready;
++
++	return 1;
++
++bail_not_ready:
++	unlock_service(service);
++
++	return 0;
++}
++
++/* Called by the slot handler thread */
++static void
++parse_rx_slots(VCHIQ_STATE_T *state)
++{
++	VCHIQ_SHARED_STATE_T *remote = state->remote;
++	VCHIQ_SERVICE_T *service = NULL;
++	int tx_pos;
++	DEBUG_INITIALISE(state->local)
++
++	tx_pos = remote->tx_pos;
++
++	while (state->rx_pos != tx_pos) {
++		VCHIQ_HEADER_T *header;
++		int msgid, size;
++		int type;
++		unsigned int localport, remoteport;
++
++		DEBUG_TRACE(PARSE_LINE);
++		if (!state->rx_data) {
++			int rx_index;
++			WARN_ON(!((state->rx_pos & VCHIQ_SLOT_MASK) == 0));
++			rx_index = remote->slot_queue[
++				SLOT_QUEUE_INDEX_FROM_POS(state->rx_pos) &
++				VCHIQ_SLOT_QUEUE_MASK];
++			state->rx_data = (char *)SLOT_DATA_FROM_INDEX(state,
++				rx_index);
++			state->rx_info = SLOT_INFO_FROM_INDEX(state, rx_index);
++
++			/* Initialise use_count to one, and increment
++			** release_count at the end of the slot to avoid
++			** releasing the slot prematurely. */
++			state->rx_info->use_count = 1;
++			state->rx_info->release_count = 0;
++		}
++
++		header = (VCHIQ_HEADER_T *)(state->rx_data +
++			(state->rx_pos & VCHIQ_SLOT_MASK));
++		DEBUG_VALUE(PARSE_HEADER, (int)header);
++		msgid = header->msgid;
++		DEBUG_VALUE(PARSE_MSGID, msgid);
++		size = header->size;
++		type = VCHIQ_MSG_TYPE(msgid);
++		localport = VCHIQ_MSG_DSTPORT(msgid);
++		remoteport = VCHIQ_MSG_SRCPORT(msgid);
++
++		if (type != VCHIQ_MSG_DATA)
++			VCHIQ_STATS_INC(state, ctrl_rx_count);
++
++		switch (type) {
++		case VCHIQ_MSG_OPENACK:
++		case VCHIQ_MSG_CLOSE:
++		case VCHIQ_MSG_DATA:
++		case VCHIQ_MSG_BULK_RX:
++		case VCHIQ_MSG_BULK_TX:
++		case VCHIQ_MSG_BULK_RX_DONE:
++		case VCHIQ_MSG_BULK_TX_DONE:
++			service = find_service_by_port(state, localport);
++			if ((!service || service->remoteport != remoteport) &&
++				(localport == 0) &&
++				(type == VCHIQ_MSG_CLOSE)) {
++				/* This could be a CLOSE from a client which
++				   hadn't yet received the OPENACK - look for
++				   the connected service */
++				if (service)
++					unlock_service(service);
++				service = get_connected_service(state,
++					remoteport);
++				if (service)
++					vchiq_log_warning(vchiq_core_log_level,
++						"%d: prs %s@%x (%d->%d) - "
++						"found connected service %d",
++						state->id, msg_type_str(type),
++						(unsigned int)header,
++						remoteport, localport,
++						service->localport);
++			}
++
++			if (!service) {
++				vchiq_log_error(vchiq_core_log_level,
++					"%d: prs %s@%x (%d->%d) - "
++					"invalid/closed service %d",
++					state->id, msg_type_str(type),
++					(unsigned int)header,
++					remoteport, localport, localport);
++				goto skip_message;
++			}
++			break;
++		default:
++			break;
++		}
++
++		if (vchiq_core_msg_log_level >= VCHIQ_LOG_INFO) {
++			int svc_fourcc;
++
++			svc_fourcc = service
++				? service->base.fourcc
++				: VCHIQ_MAKE_FOURCC('?', '?', '?', '?');
++			vchiq_log_info(vchiq_core_msg_log_level,
++				"Rcvd Msg %s(%u) from %c%c%c%c s:%d d:%d "
++				"len:%d",
++				msg_type_str(type), type,
++				VCHIQ_FOURCC_AS_4CHARS(svc_fourcc),
++				remoteport, localport, size);
++			if (size > 0)
++				vchiq_log_dump_mem("Rcvd", 0, header->data,
++					min(64, size));
++		}
++
++		if (((unsigned int)header & VCHIQ_SLOT_MASK) + calc_stride(size)
++			> VCHIQ_SLOT_SIZE) {
++			vchiq_log_error(vchiq_core_log_level,
++				"header %x (msgid %x) - size %x too big for "
++				"slot",
++				(unsigned int)header, (unsigned int)msgid,
++				(unsigned int)size);
++			WARN(1, "oversized for slot\n");
++		}
++
++		switch (type) {
++		case VCHIQ_MSG_OPEN:
++			WARN_ON(!(VCHIQ_MSG_DSTPORT(msgid) == 0));
++			if (!parse_open(state, header))
++				goto bail_not_ready;
++			break;
++		case VCHIQ_MSG_OPENACK:
++			if (size >= sizeof(struct vchiq_openack_payload)) {
++				const struct vchiq_openack_payload *payload =
++					(struct vchiq_openack_payload *)
++					header->data;
++				service->peer_version = payload->version;
++			}
++			vchiq_log_info(vchiq_core_log_level,
++				"%d: prs OPENACK@%x,%x (%d->%d) v:%d",
++				state->id, (unsigned int)header, size,
++				remoteport, localport, service->peer_version);
++			if (service->srvstate ==
++				VCHIQ_SRVSTATE_OPENING) {
++				service->remoteport = remoteport;
++				vchiq_set_service_state(service,
++					VCHIQ_SRVSTATE_OPEN);
++				up(&service->remove_event);
++			} else
++				vchiq_log_error(vchiq_core_log_level,
++					"OPENACK received in state %s",
++					srvstate_names[service->srvstate]);
++			break;
++		case VCHIQ_MSG_CLOSE:
++			WARN_ON(size != 0); /* There should be no data */
++
++			vchiq_log_info(vchiq_core_log_level,
++				"%d: prs CLOSE@%x (%d->%d)",
++				state->id, (unsigned int)header,
++				remoteport, localport);
++
++			mark_service_closing_internal(service, 1);
++
++			if (vchiq_close_service_internal(service,
++				1/*close_recvd*/) == VCHIQ_RETRY)
++				goto bail_not_ready;
++
++			vchiq_log_info(vchiq_core_log_level,
++				"Close Service %c%c%c%c s:%u d:%d",
++				VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++				service->localport,
++				service->remoteport);
++			break;
++		case VCHIQ_MSG_DATA:
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: prs DATA@%x,%x (%d->%d)",
++				state->id, (unsigned int)header, size,
++				remoteport, localport);
++
++			if ((service->remoteport == remoteport)
++				&& (service->srvstate ==
++				VCHIQ_SRVSTATE_OPEN)) {
++				header->msgid = msgid | VCHIQ_MSGID_CLAIMED;
++				claim_slot(state->rx_info);
++				DEBUG_TRACE(PARSE_LINE);
++				if (make_service_callback(service,
++					VCHIQ_MESSAGE_AVAILABLE, header,
++					NULL) == VCHIQ_RETRY) {
++					DEBUG_TRACE(PARSE_LINE);
++					goto bail_not_ready;
++				}
++				VCHIQ_SERVICE_STATS_INC(service, ctrl_rx_count);
++				VCHIQ_SERVICE_STATS_ADD(service, ctrl_rx_bytes,
++					size);
++			} else {
++				VCHIQ_STATS_INC(state, error_count);
++			}
++			break;
++		case VCHIQ_MSG_CONNECT:
++			vchiq_log_info(vchiq_core_log_level,
++				"%d: prs CONNECT@%x",
++				state->id, (unsigned int)header);
++			up(&state->connect);
++			break;
++		case VCHIQ_MSG_BULK_RX:
++		case VCHIQ_MSG_BULK_TX: {
++			VCHIQ_BULK_QUEUE_T *queue;
++			WARN_ON(!state->is_master);
++			queue = (type == VCHIQ_MSG_BULK_RX) ?
++				&service->bulk_tx : &service->bulk_rx;
++			if ((service->remoteport == remoteport)
++				&& (service->srvstate ==
++				VCHIQ_SRVSTATE_OPEN)) {
++				VCHIQ_BULK_T *bulk;
++				int resolved = 0;
++
++				DEBUG_TRACE(PARSE_LINE);
++				if (mutex_lock_interruptible(
++					&service->bulk_mutex) != 0) {
++					DEBUG_TRACE(PARSE_LINE);
++					goto bail_not_ready;
++				}
++
++				WARN_ON(!(queue->remote_insert < queue->remove +
++					VCHIQ_NUM_SERVICE_BULKS));
++				bulk = &queue->bulks[
++					BULK_INDEX(queue->remote_insert)];
++				bulk->remote_data =
++					(void *)((int *)header->data)[0];
++				bulk->remote_size = ((int *)header->data)[1];
++				wmb();
++
++				vchiq_log_info(vchiq_core_log_level,
++					"%d: prs %s@%x (%d->%d) %x@%x",
++					state->id, msg_type_str(type),
++					(unsigned int)header,
++					remoteport, localport,
++					bulk->remote_size,
++					(unsigned int)bulk->remote_data);
++
++				queue->remote_insert++;
++
++				if (atomic_read(&pause_bulks_count)) {
++					state->deferred_bulks++;
++					vchiq_log_info(vchiq_core_log_level,
++						"%s: deferring bulk (%d)",
++						__func__,
++						state->deferred_bulks);
++					if (state->conn_state !=
++						VCHIQ_CONNSTATE_PAUSE_SENT)
++						vchiq_log_error(
++							vchiq_core_log_level,
++							"%s: bulks paused in "
++							"unexpected state %s",
++							__func__,
++							conn_state_names[
++							state->conn_state]);
++				} else if (state->conn_state ==
++					VCHIQ_CONNSTATE_CONNECTED) {
++					DEBUG_TRACE(PARSE_LINE);
++					resolved = resolve_bulks(service,
++						queue);
++				}
++
++				mutex_unlock(&service->bulk_mutex);
++				if (resolved)
++					notify_bulks(service, queue,
++						1/*retry_poll*/);
++			}
++		} break;
++		case VCHIQ_MSG_BULK_RX_DONE:
++		case VCHIQ_MSG_BULK_TX_DONE:
++			WARN_ON(state->is_master);
++			if ((service->remoteport == remoteport)
++				&& (service->srvstate !=
++				VCHIQ_SRVSTATE_FREE)) {
++				VCHIQ_BULK_QUEUE_T *queue;
++				VCHIQ_BULK_T *bulk;
++
++				queue = (type == VCHIQ_MSG_BULK_RX_DONE) ?
++					&service->bulk_rx : &service->bulk_tx;
++
++				DEBUG_TRACE(PARSE_LINE);
++				if (mutex_lock_interruptible(
++					&service->bulk_mutex) != 0) {
++					DEBUG_TRACE(PARSE_LINE);
++					goto bail_not_ready;
++				}
++				if ((int)(queue->remote_insert -
++					queue->local_insert) >= 0) {
++					vchiq_log_error(vchiq_core_log_level,
++						"%d: prs %s@%x (%d->%d) "
++						"unexpected (ri=%d,li=%d)",
++						state->id, msg_type_str(type),
++						(unsigned int)header,
++						remoteport, localport,
++						queue->remote_insert,
++						queue->local_insert);
++					mutex_unlock(&service->bulk_mutex);
++					break;
++				}
++
++				BUG_ON(queue->process == queue->local_insert);
++				BUG_ON(queue->process != queue->remote_insert);
++
++				bulk = &queue->bulks[
++					BULK_INDEX(queue->remote_insert)];
++				bulk->actual = *(int *)header->data;
++				queue->remote_insert++;
++
++				vchiq_log_info(vchiq_core_log_level,
++					"%d: prs %s@%x (%d->%d) %x@%x",
++					state->id, msg_type_str(type),
++					(unsigned int)header,
++					remoteport, localport,
++					bulk->actual, (unsigned int)bulk->data);
++
++				vchiq_log_trace(vchiq_core_log_level,
++					"%d: prs:%d %cx li=%x ri=%x p=%x",
++					state->id, localport,
++					(type == VCHIQ_MSG_BULK_RX_DONE) ?
++						'r' : 't',
++					queue->local_insert,
++					queue->remote_insert, queue->process);
++
++				DEBUG_TRACE(PARSE_LINE);
++				WARN_ON(queue->process == queue->local_insert);
++				vchiq_complete_bulk(bulk);
++				queue->process++;
++				mutex_unlock(&service->bulk_mutex);
++				DEBUG_TRACE(PARSE_LINE);
++				notify_bulks(service, queue, 1/*retry_poll*/);
++				DEBUG_TRACE(PARSE_LINE);
++			}
++			break;
++		case VCHIQ_MSG_PADDING:
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: prs PADDING@%x,%x",
++				state->id, (unsigned int)header, size);
++			break;
++		case VCHIQ_MSG_PAUSE:
++			/* If initiated, signal the application thread */
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: prs PAUSE@%x,%x",
++				state->id, (unsigned int)header, size);
++			if (state->conn_state == VCHIQ_CONNSTATE_PAUSED) {
++				vchiq_log_error(vchiq_core_log_level,
++					"%d: PAUSE received in state PAUSED",
++					state->id);
++				break;
++			}
++			if (state->conn_state != VCHIQ_CONNSTATE_PAUSE_SENT) {
++				/* Send a PAUSE in response */
++				if (queue_message(state, NULL,
++					VCHIQ_MAKE_MSG(VCHIQ_MSG_PAUSE, 0, 0),
++					NULL, 0, 0, 0) == VCHIQ_RETRY)
++					goto bail_not_ready;
++				if (state->is_master)
++					pause_bulks(state);
++			}
++			/* At this point slot_mutex is held */
++			vchiq_set_conn_state(state, VCHIQ_CONNSTATE_PAUSED);
++			vchiq_platform_paused(state);
++			break;
++		case VCHIQ_MSG_RESUME:
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: prs RESUME@%x,%x",
++				state->id, (unsigned int)header, size);
++			/* Release the slot mutex */
++			mutex_unlock(&state->slot_mutex);
++			if (state->is_master)
++				resume_bulks(state);
++			vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTED);
++			vchiq_platform_resumed(state);
++			break;
++
++		case VCHIQ_MSG_REMOTE_USE:
++			vchiq_on_remote_use(state);
++			break;
++		case VCHIQ_MSG_REMOTE_RELEASE:
++			vchiq_on_remote_release(state);
++			break;
++		case VCHIQ_MSG_REMOTE_USE_ACTIVE:
++			vchiq_on_remote_use_active(state);
++			break;
++
++		default:
++			vchiq_log_error(vchiq_core_log_level,
++				"%d: prs invalid msgid %x@%x,%x",
++				state->id, msgid, (unsigned int)header, size);
++			WARN(1, "invalid message\n");
++			break;
++		}
++
++skip_message:
++		if (service) {
++			unlock_service(service);
++			service = NULL;
++		}
++
++		state->rx_pos += calc_stride(size);
++
++		DEBUG_TRACE(PARSE_LINE);
++		/* Perform some housekeeping when the end of the slot is
++		** reached. */
++		if ((state->rx_pos & VCHIQ_SLOT_MASK) == 0) {
++			/* Remove the extra reference count. */
++			release_slot(state, state->rx_info, NULL, NULL);
++			state->rx_data = NULL;
++		}
++	}
++
++bail_not_ready:
++	if (service)
++		unlock_service(service);
++}
++
++/* Called by the slot handler thread */
++static int
++slot_handler_func(void *v)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v;
++	VCHIQ_SHARED_STATE_T *local = state->local;
++	DEBUG_INITIALISE(local)
++
++	while (1) {
++		DEBUG_COUNT(SLOT_HANDLER_COUNT);
++		DEBUG_TRACE(SLOT_HANDLER_LINE);
++		remote_event_wait(&local->trigger);
++
++		rmb();
++
++		DEBUG_TRACE(SLOT_HANDLER_LINE);
++		if (state->poll_needed) {
++			/* Check if we need to suspend - may change our
++			 * conn_state */
++			vchiq_platform_check_suspend(state);
++
++			state->poll_needed = 0;
++
++			/* Handle service polling and other rare conditions here
++			** out of the mainline code */
++			switch (state->conn_state) {
++			case VCHIQ_CONNSTATE_CONNECTED:
++				/* Poll the services as requested */
++				poll_services(state);
++				break;
++
++			case VCHIQ_CONNSTATE_PAUSING:
++				if (state->is_master)
++					pause_bulks(state);
++				if (queue_message(state, NULL,
++					VCHIQ_MAKE_MSG(VCHIQ_MSG_PAUSE, 0, 0),
++					NULL, 0, 0, 0) != VCHIQ_RETRY) {
++					vchiq_set_conn_state(state,
++						VCHIQ_CONNSTATE_PAUSE_SENT);
++				} else {
++					if (state->is_master)
++						resume_bulks(state);
++					/* Retry later */
++					state->poll_needed = 1;
++				}
++				break;
++
++			case VCHIQ_CONNSTATE_PAUSED:
++				vchiq_platform_resume(state);
++				break;
++
++			case VCHIQ_CONNSTATE_RESUMING:
++				if (queue_message(state, NULL,
++					VCHIQ_MAKE_MSG(VCHIQ_MSG_RESUME, 0, 0),
++					NULL, 0, 0, 0) != VCHIQ_RETRY) {
++					if (state->is_master)
++						resume_bulks(state);
++					vchiq_set_conn_state(state,
++						VCHIQ_CONNSTATE_CONNECTED);
++					vchiq_platform_resumed(state);
++				} else {
++					/* This should really be impossible,
++					** since the PAUSE should have flushed
++					** through outstanding messages. */
++					vchiq_log_error(vchiq_core_log_level,
++						"Failed to send RESUME "
++						"message");
++					BUG();
++				}
++				break;
++
++			case VCHIQ_CONNSTATE_PAUSE_TIMEOUT:
++			case VCHIQ_CONNSTATE_RESUME_TIMEOUT:
++				vchiq_platform_handle_timeout(state);
++				break;
++			default:
++				break;
++			}
++
++
++		}
++
++		DEBUG_TRACE(SLOT_HANDLER_LINE);
++		parse_rx_slots(state);
++	}
++	return 0;
++}
++
++
++/* Called by the recycle thread */
++static int
++recycle_func(void *v)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v;
++	VCHIQ_SHARED_STATE_T *local = state->local;
++
++	while (1) {
++		remote_event_wait(&local->recycle);
++
++		process_free_queue(state);
++	}
++	return 0;
++}
++
++
++/* Called by the sync thread */
++static int
++sync_func(void *v)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v;
++	VCHIQ_SHARED_STATE_T *local = state->local;
++	VCHIQ_HEADER_T *header = (VCHIQ_HEADER_T *)SLOT_DATA_FROM_INDEX(state,
++		state->remote->slot_sync);
++
++	while (1) {
++		VCHIQ_SERVICE_T *service;
++		int msgid, size;
++		int type;
++		unsigned int localport, remoteport;
++
++		remote_event_wait(&local->sync_trigger);
++
++		rmb();
++
++		msgid = header->msgid;
++		size = header->size;
++		type = VCHIQ_MSG_TYPE(msgid);
++		localport = VCHIQ_MSG_DSTPORT(msgid);
++		remoteport = VCHIQ_MSG_SRCPORT(msgid);
++
++		service = find_service_by_port(state, localport);
++
++		if (!service) {
++			vchiq_log_error(vchiq_sync_log_level,
++				"%d: sf %s@%x (%d->%d) - "
++				"invalid/closed service %d",
++				state->id, msg_type_str(type),
++				(unsigned int)header,
++				remoteport, localport, localport);
++			release_message_sync(state, header);
++			continue;
++		}
++
++		if (vchiq_sync_log_level >= VCHIQ_LOG_TRACE) {
++			int svc_fourcc;
++
++			svc_fourcc = service
++				? service->base.fourcc
++				: VCHIQ_MAKE_FOURCC('?', '?', '?', '?');
++			vchiq_log_trace(vchiq_sync_log_level,
++				"Rcvd Msg %s from %c%c%c%c s:%d d:%d len:%d",
++				msg_type_str(type),
++				VCHIQ_FOURCC_AS_4CHARS(svc_fourcc),
++				remoteport, localport, size);
++			if (size > 0)
++				vchiq_log_dump_mem("Rcvd", 0, header->data,
++					min(64, size));
++		}
++
++		switch (type) {
++		case VCHIQ_MSG_OPENACK:
++			if (size >= sizeof(struct vchiq_openack_payload)) {
++				const struct vchiq_openack_payload *payload =
++					(struct vchiq_openack_payload *)
++					header->data;
++				service->peer_version = payload->version;
++			}
++			vchiq_log_info(vchiq_sync_log_level,
++				"%d: sf OPENACK@%x,%x (%d->%d) v:%d",
++				state->id, (unsigned int)header, size,
++				remoteport, localport, service->peer_version);
++			if (service->srvstate == VCHIQ_SRVSTATE_OPENING) {
++				service->remoteport = remoteport;
++				vchiq_set_service_state(service,
++					VCHIQ_SRVSTATE_OPENSYNC);
++				up(&service->remove_event);
++			}
++			release_message_sync(state, header);
++			break;
++
++		case VCHIQ_MSG_DATA:
++			vchiq_log_trace(vchiq_sync_log_level,
++				"%d: sf DATA@%x,%x (%d->%d)",
++				state->id, (unsigned int)header, size,
++				remoteport, localport);
++
++			if ((service->remoteport == remoteport) &&
++				(service->srvstate ==
++				VCHIQ_SRVSTATE_OPENSYNC)) {
++				if (make_service_callback(service,
++					VCHIQ_MESSAGE_AVAILABLE, header,
++					NULL) == VCHIQ_RETRY)
++					vchiq_log_error(vchiq_sync_log_level,
++						"synchronous callback to "
++						"service %d returns "
++						"VCHIQ_RETRY",
++						localport);
++			}
++			break;
++
++		default:
++			vchiq_log_error(vchiq_sync_log_level,
++				"%d: sf unexpected msgid %x@%x,%x",
++				state->id, msgid, (unsigned int)header, size);
++			release_message_sync(state, header);
++			break;
++		}
++
++		unlock_service(service);
++	}
++
++	return 0;
++}
++
++
++static void
++init_bulk_queue(VCHIQ_BULK_QUEUE_T *queue)
++{
++	queue->local_insert = 0;
++	queue->remote_insert = 0;
++	queue->process = 0;
++	queue->remote_notify = 0;
++	queue->remove = 0;
++}
++
++
++inline const char *
++get_conn_state_name(VCHIQ_CONNSTATE_T conn_state)
++{
++	return conn_state_names[conn_state];
++}
++
++
++VCHIQ_SLOT_ZERO_T *
++vchiq_init_slots(void *mem_base, int mem_size)
++{
++	int mem_align = (VCHIQ_SLOT_SIZE - (int)mem_base) & VCHIQ_SLOT_MASK;
++	VCHIQ_SLOT_ZERO_T *slot_zero =
++		(VCHIQ_SLOT_ZERO_T *)((char *)mem_base + mem_align);
++	int num_slots = (mem_size - mem_align)/VCHIQ_SLOT_SIZE;
++	int first_data_slot = VCHIQ_SLOT_ZERO_SLOTS;
++
++	/* Ensure there is enough memory to run an absolutely minimum system */
++	num_slots -= first_data_slot;
++
++	if (num_slots < 4) {
++		vchiq_log_error(vchiq_core_log_level,
++			"vchiq_init_slots - insufficient memory %x bytes",
++			mem_size);
++		return NULL;
++	}
++
++	memset(slot_zero, 0, sizeof(VCHIQ_SLOT_ZERO_T));
++
++	slot_zero->magic = VCHIQ_MAGIC;
++	slot_zero->version = VCHIQ_VERSION;
++	slot_zero->version_min = VCHIQ_VERSION_MIN;
++	slot_zero->slot_zero_size = sizeof(VCHIQ_SLOT_ZERO_T);
++	slot_zero->slot_size = VCHIQ_SLOT_SIZE;
++	slot_zero->max_slots = VCHIQ_MAX_SLOTS;
++	slot_zero->max_slots_per_side = VCHIQ_MAX_SLOTS_PER_SIDE;
++
++	slot_zero->master.slot_sync = first_data_slot;
++	slot_zero->master.slot_first = first_data_slot + 1;
++	slot_zero->master.slot_last = first_data_slot + (num_slots/2) - 1;
++	slot_zero->slave.slot_sync = first_data_slot + (num_slots/2);
++	slot_zero->slave.slot_first = first_data_slot + (num_slots/2) + 1;
++	slot_zero->slave.slot_last = first_data_slot + num_slots - 1;
++
++	return slot_zero;
++}
++
++VCHIQ_STATUS_T
++vchiq_init_state(VCHIQ_STATE_T *state, VCHIQ_SLOT_ZERO_T *slot_zero,
++		 int is_master)
++{
++	VCHIQ_SHARED_STATE_T *local;
++	VCHIQ_SHARED_STATE_T *remote;
++	VCHIQ_STATUS_T status;
++	char threadname[10];
++	static int id;
++	int i;
++
++	vchiq_log_warning(vchiq_core_log_level,
++		"%s: slot_zero = 0x%08lx, is_master = %d",
++		__func__, (unsigned long)slot_zero, is_master);
++
++	/* Check the input configuration */
++
++	if (slot_zero->magic != VCHIQ_MAGIC) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("Invalid VCHIQ magic value found.");
++		vchiq_loud_error("slot_zero=%x: magic=%x (expected %x)",
++			(unsigned int)slot_zero, slot_zero->magic, VCHIQ_MAGIC);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	if (slot_zero->version < VCHIQ_VERSION_MIN) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("Incompatible VCHIQ versions found.");
++		vchiq_loud_error("slot_zero=%x: VideoCore version=%d "
++			"(minimum %d)",
++			(unsigned int)slot_zero, slot_zero->version,
++			VCHIQ_VERSION_MIN);
++		vchiq_loud_error("Restart with a newer VideoCore image.");
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	if (VCHIQ_VERSION < slot_zero->version_min) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("Incompatible VCHIQ versions found.");
++		vchiq_loud_error("slot_zero=%x: version=%d (VideoCore "
++			"minimum %d)",
++			(unsigned int)slot_zero, VCHIQ_VERSION,
++			slot_zero->version_min);
++		vchiq_loud_error("Restart with a newer kernel.");
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	if ((slot_zero->slot_zero_size != sizeof(VCHIQ_SLOT_ZERO_T)) ||
++		 (slot_zero->slot_size != VCHIQ_SLOT_SIZE) ||
++		 (slot_zero->max_slots != VCHIQ_MAX_SLOTS) ||
++		 (slot_zero->max_slots_per_side != VCHIQ_MAX_SLOTS_PER_SIDE)) {
++		vchiq_loud_error_header();
++		if (slot_zero->slot_zero_size != sizeof(VCHIQ_SLOT_ZERO_T))
++			vchiq_loud_error("slot_zero=%x: slot_zero_size=%x "
++				"(expected %x)",
++				(unsigned int)slot_zero,
++				slot_zero->slot_zero_size,
++				sizeof(VCHIQ_SLOT_ZERO_T));
++		if (slot_zero->slot_size != VCHIQ_SLOT_SIZE)
++			vchiq_loud_error("slot_zero=%x: slot_size=%d "
++				"(expected %d",
++				(unsigned int)slot_zero, slot_zero->slot_size,
++				VCHIQ_SLOT_SIZE);
++		if (slot_zero->max_slots != VCHIQ_MAX_SLOTS)
++			vchiq_loud_error("slot_zero=%x: max_slots=%d "
++				"(expected %d)",
++				(unsigned int)slot_zero, slot_zero->max_slots,
++				VCHIQ_MAX_SLOTS);
++		if (slot_zero->max_slots_per_side != VCHIQ_MAX_SLOTS_PER_SIDE)
++			vchiq_loud_error("slot_zero=%x: max_slots_per_side=%d "
++				"(expected %d)",
++				(unsigned int)slot_zero,
++				slot_zero->max_slots_per_side,
++				VCHIQ_MAX_SLOTS_PER_SIDE);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	if (is_master) {
++		local = &slot_zero->master;
++		remote = &slot_zero->slave;
++	} else {
++		local = &slot_zero->slave;
++		remote = &slot_zero->master;
++	}
++
++	if (local->initialised) {
++		vchiq_loud_error_header();
++		if (remote->initialised)
++			vchiq_loud_error("local state has already been "
++				"initialised");
++		else
++			vchiq_loud_error("master/slave mismatch - two %ss",
++				is_master ? "master" : "slave");
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	memset(state, 0, sizeof(VCHIQ_STATE_T));
++
++	state->id = id++;
++	state->is_master = is_master;
++
++	/*
++		initialize shared state pointers
++	 */
++
++	state->local = local;
++	state->remote = remote;
++	state->slot_data = (VCHIQ_SLOT_T *)slot_zero;
++
++	/*
++		initialize events and mutexes
++	 */
++
++	sema_init(&state->connect, 0);
++	mutex_init(&state->mutex);
++	sema_init(&state->trigger_event, 0);
++	sema_init(&state->recycle_event, 0);
++	sema_init(&state->sync_trigger_event, 0);
++	sema_init(&state->sync_release_event, 0);
++
++	mutex_init(&state->slot_mutex);
++	mutex_init(&state->recycle_mutex);
++	mutex_init(&state->sync_mutex);
++	mutex_init(&state->bulk_transfer_mutex);
++
++	sema_init(&state->slot_available_event, 0);
++	sema_init(&state->slot_remove_event, 0);
++	sema_init(&state->data_quota_event, 0);
++
++	state->slot_queue_available = 0;
++
++	for (i = 0; i < VCHIQ_MAX_SERVICES; i++) {
++		VCHIQ_SERVICE_QUOTA_T *service_quota =
++			&state->service_quotas[i];
++		sema_init(&service_quota->quota_event, 0);
++	}
++
++	for (i = local->slot_first; i <= local->slot_last; i++) {
++		local->slot_queue[state->slot_queue_available++] = i;
++		up(&state->slot_available_event);
++	}
++
++	state->default_slot_quota = state->slot_queue_available/2;
++	state->default_message_quota =
++		min((unsigned short)(state->default_slot_quota * 256),
++		(unsigned short)~0);
++
++	state->previous_data_index = -1;
++	state->data_use_count = 0;
++	state->data_quota = state->slot_queue_available - 1;
++
++	local->trigger.event = &state->trigger_event;
++	remote_event_create(&local->trigger);
++	local->tx_pos = 0;
++
++	local->recycle.event = &state->recycle_event;
++	remote_event_create(&local->recycle);
++	local->slot_queue_recycle = state->slot_queue_available;
++
++	local->sync_trigger.event = &state->sync_trigger_event;
++	remote_event_create(&local->sync_trigger);
++
++	local->sync_release.event = &state->sync_release_event;
++	remote_event_create(&local->sync_release);
++
++	/* At start-of-day, the slot is empty and available */
++	((VCHIQ_HEADER_T *)SLOT_DATA_FROM_INDEX(state, local->slot_sync))->msgid
++		= VCHIQ_MSGID_PADDING;
++	remote_event_signal_local(&local->sync_release);
++
++	local->debug[DEBUG_ENTRIES] = DEBUG_MAX;
++
++	status = vchiq_platform_init_state(state);
++
++	/*
++		bring up slot handler thread
++	 */
++	snprintf(threadname, sizeof(threadname), "VCHIQ-%d", state->id);
++	state->slot_handler_thread = kthread_create(&slot_handler_func,
++		(void *)state,
++		threadname);
++
++	if (state->slot_handler_thread == NULL) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("couldn't create thread %s", threadname);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++	set_user_nice(state->slot_handler_thread, -19);
++	wake_up_process(state->slot_handler_thread);
++
++	snprintf(threadname, sizeof(threadname), "VCHIQr-%d", state->id);
++	state->recycle_thread = kthread_create(&recycle_func,
++		(void *)state,
++		threadname);
++	if (state->recycle_thread == NULL) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("couldn't create thread %s", threadname);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++	set_user_nice(state->recycle_thread, -19);
++	wake_up_process(state->recycle_thread);
++
++	snprintf(threadname, sizeof(threadname), "VCHIQs-%d", state->id);
++	state->sync_thread = kthread_create(&sync_func,
++		(void *)state,
++		threadname);
++	if (state->sync_thread == NULL) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("couldn't create thread %s", threadname);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++	set_user_nice(state->sync_thread, -20);
++	wake_up_process(state->sync_thread);
++
++	BUG_ON(state->id >= VCHIQ_MAX_STATES);
++	vchiq_states[state->id] = state;
++
++	/* Indicate readiness to the other side */
++	local->initialised = 1;
++
++	return status;
++}
++
++/* Called from application thread when a client or server service is created. */
++VCHIQ_SERVICE_T *
++vchiq_add_service_internal(VCHIQ_STATE_T *state,
++	const VCHIQ_SERVICE_PARAMS_T *params, int srvstate,
++	VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_SERVICE_T *service;
++
++	service = kmalloc(sizeof(VCHIQ_SERVICE_T), GFP_KERNEL);
++	if (service) {
++		service->base.fourcc   = params->fourcc;
++		service->base.callback = params->callback;
++		service->base.userdata = params->userdata;
++		service->handle        = VCHIQ_SERVICE_HANDLE_INVALID;
++		service->ref_count     = 1;
++		service->srvstate      = VCHIQ_SRVSTATE_FREE;
++		service->localport     = VCHIQ_PORT_FREE;
++		service->remoteport    = VCHIQ_PORT_FREE;
++
++		service->public_fourcc = (srvstate == VCHIQ_SRVSTATE_OPENING) ?
++			VCHIQ_FOURCC_INVALID : params->fourcc;
++		service->client_id     = 0;
++		service->auto_close    = 1;
++		service->sync          = 0;
++		service->closing       = 0;
++		atomic_set(&service->poll_flags, 0);
++		service->version       = params->version;
++		service->version_min   = params->version_min;
++		service->state         = state;
++		service->instance      = instance;
++		service->service_use_count = 0;
++		init_bulk_queue(&service->bulk_tx);
++		init_bulk_queue(&service->bulk_rx);
++		sema_init(&service->remove_event, 0);
++		sema_init(&service->bulk_remove_event, 0);
++		mutex_init(&service->bulk_mutex);
++		memset(&service->stats, 0, sizeof(service->stats));
++	} else {
++		vchiq_log_error(vchiq_core_log_level,
++			"Out of memory");
++	}
++
++	if (service) {
++		VCHIQ_SERVICE_T **pservice = NULL;
++		int i;
++
++		/* Although it is perfectly possible to use service_spinlock
++		** to protect the creation of services, it is overkill as it
++		** disables interrupts while the array is searched.
++		** The only danger is of another thread trying to create a
++		** service - service deletion is safe.
++		** Therefore it is preferable to use state->mutex which,
++		** although slower to claim, doesn't block interrupts while
++		** it is held.
++		*/
++
++		mutex_lock(&state->mutex);
++
++		/* Prepare to use a previously unused service */
++		if (state->unused_service < VCHIQ_MAX_SERVICES)
++			pservice = &state->services[state->unused_service];
++
++		if (srvstate == VCHIQ_SRVSTATE_OPENING) {
++			for (i = 0; i < state->unused_service; i++) {
++				VCHIQ_SERVICE_T *srv = state->services[i];
++				if (!srv) {
++					pservice = &state->services[i];
++					break;
++				}
++			}
++		} else {
++			for (i = (state->unused_service - 1); i >= 0; i--) {
++				VCHIQ_SERVICE_T *srv = state->services[i];
++				if (!srv)
++					pservice = &state->services[i];
++				else if ((srv->public_fourcc == params->fourcc)
++					&& ((srv->instance != instance) ||
++					(srv->base.callback !=
++					params->callback))) {
++					/* There is another server using this
++					** fourcc which doesn't match. */
++					pservice = NULL;
++					break;
++				}
++			}
++		}
++
++		if (pservice) {
++			service->localport = (pservice - state->services);
++			if (!handle_seq)
++				handle_seq = VCHIQ_MAX_STATES *
++					 VCHIQ_MAX_SERVICES;
++			service->handle = handle_seq |
++				(state->id * VCHIQ_MAX_SERVICES) |
++				service->localport;
++			handle_seq += VCHIQ_MAX_STATES * VCHIQ_MAX_SERVICES;
++			*pservice = service;
++			if (pservice == &state->services[state->unused_service])
++				state->unused_service++;
++		}
++
++		mutex_unlock(&state->mutex);
++
++		if (!pservice) {
++			kfree(service);
++			service = NULL;
++		}
++	}
++
++	if (service) {
++		VCHIQ_SERVICE_QUOTA_T *service_quota =
++			&state->service_quotas[service->localport];
++		service_quota->slot_quota = state->default_slot_quota;
++		service_quota->message_quota = state->default_message_quota;
++		if (service_quota->slot_use_count == 0)
++			service_quota->previous_tx_index =
++				SLOT_QUEUE_INDEX_FROM_POS(state->local_tx_pos)
++				- 1;
++
++		/* Bring this service online */
++		vchiq_set_service_state(service, srvstate);
++
++		vchiq_log_info(vchiq_core_msg_log_level,
++			"%s Service %c%c%c%c SrcPort:%d",
++			(srvstate == VCHIQ_SRVSTATE_OPENING)
++			? "Open" : "Add",
++			VCHIQ_FOURCC_AS_4CHARS(params->fourcc),
++			service->localport);
++	}
++
++	/* Don't unlock the service - leave it with a ref_count of 1. */
++
++	return service;
++}
++
++VCHIQ_STATUS_T
++vchiq_open_service_internal(VCHIQ_SERVICE_T *service, int client_id)
++{
++	struct vchiq_open_payload payload = {
++		service->base.fourcc,
++		client_id,
++		service->version,
++		service->version_min
++	};
++	VCHIQ_ELEMENT_T body = { &payload, sizeof(payload) };
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	service->client_id = client_id;
++	vchiq_use_service_internal(service);
++	status = queue_message(service->state, NULL,
++		VCHIQ_MAKE_MSG(VCHIQ_MSG_OPEN, service->localport, 0),
++		&body, 1, sizeof(payload), 1);
++	if (status == VCHIQ_SUCCESS) {
++		if (down_interruptible(&service->remove_event) != 0) {
++			status = VCHIQ_RETRY;
++			vchiq_release_service_internal(service);
++		} else if ((service->srvstate != VCHIQ_SRVSTATE_OPEN) &&
++			(service->srvstate != VCHIQ_SRVSTATE_OPENSYNC)) {
++			if (service->srvstate != VCHIQ_SRVSTATE_CLOSEWAIT)
++				vchiq_log_error(vchiq_core_log_level,
++					"%d: osi - srvstate = %s (ref %d)",
++					service->state->id,
++					srvstate_names[service->srvstate],
++					service->ref_count);
++			status = VCHIQ_ERROR;
++			VCHIQ_SERVICE_STATS_INC(service, error_count);
++			vchiq_release_service_internal(service);
++		}
++	}
++	return status;
++}
++
++static void
++release_service_messages(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATE_T *state = service->state;
++	int slot_last = state->remote->slot_last;
++	int i;
++
++	/* Release any claimed messages */
++	for (i = state->remote->slot_first; i <= slot_last; i++) {
++		VCHIQ_SLOT_INFO_T *slot_info =
++			SLOT_INFO_FROM_INDEX(state, i);
++		if (slot_info->release_count != slot_info->use_count) {
++			char *data =
++				(char *)SLOT_DATA_FROM_INDEX(state, i);
++			unsigned int pos, end;
++
++			end = VCHIQ_SLOT_SIZE;
++			if (data == state->rx_data)
++				/* This buffer is still being read from - stop
++				** at the current read position */
++				end = state->rx_pos & VCHIQ_SLOT_MASK;
++
++			pos = 0;
++
++			while (pos < end) {
++				VCHIQ_HEADER_T *header =
++					(VCHIQ_HEADER_T *)(data + pos);
++				int msgid = header->msgid;
++				int port = VCHIQ_MSG_DSTPORT(msgid);
++				if ((port == service->localport) &&
++					(msgid & VCHIQ_MSGID_CLAIMED)) {
++					vchiq_log_info(vchiq_core_log_level,
++						"  fsi - hdr %x",
++						(unsigned int)header);
++					release_slot(state, slot_info, header,
++						NULL);
++				}
++				pos += calc_stride(header->size);
++				if (pos > VCHIQ_SLOT_SIZE) {
++					vchiq_log_error(vchiq_core_log_level,
++						"fsi - pos %x: header %x, "
++						"msgid %x, header->msgid %x, "
++						"header->size %x",
++						pos, (unsigned int)header,
++						msgid, header->msgid,
++						header->size);
++					WARN(1, "invalid slot position\n");
++				}
++			}
++		}
++	}
++}
++
++static int
++do_abort_bulks(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATUS_T status;
++
++	/* Abort any outstanding bulk transfers */
++	if (mutex_lock_interruptible(&service->bulk_mutex) != 0)
++		return 0;
++	abort_outstanding_bulks(service, &service->bulk_tx);
++	abort_outstanding_bulks(service, &service->bulk_rx);
++	mutex_unlock(&service->bulk_mutex);
++
++	status = notify_bulks(service, &service->bulk_tx, 0/*!retry_poll*/);
++	if (status == VCHIQ_SUCCESS)
++		status = notify_bulks(service, &service->bulk_rx,
++			0/*!retry_poll*/);
++	return (status == VCHIQ_SUCCESS);
++}
++
++static VCHIQ_STATUS_T
++close_service_complete(VCHIQ_SERVICE_T *service, int failstate)
++{
++	VCHIQ_STATUS_T status;
++	int is_server = (service->public_fourcc != VCHIQ_FOURCC_INVALID);
++	int newstate;
++
++	switch (service->srvstate) {
++	case VCHIQ_SRVSTATE_OPEN:
++	case VCHIQ_SRVSTATE_CLOSESENT:
++	case VCHIQ_SRVSTATE_CLOSERECVD:
++		if (is_server) {
++			if (service->auto_close) {
++				service->client_id = 0;
++				service->remoteport = VCHIQ_PORT_FREE;
++				newstate = VCHIQ_SRVSTATE_LISTENING;
++			} else
++				newstate = VCHIQ_SRVSTATE_CLOSEWAIT;
++		} else
++			newstate = VCHIQ_SRVSTATE_CLOSED;
++		vchiq_set_service_state(service, newstate);
++		break;
++	case VCHIQ_SRVSTATE_LISTENING:
++		break;
++	default:
++		vchiq_log_error(vchiq_core_log_level,
++			"close_service_complete(%x) called in state %s",
++			service->handle, srvstate_names[service->srvstate]);
++		WARN(1, "close_service_complete in unexpected state\n");
++		return VCHIQ_ERROR;
++	}
++
++	status = make_service_callback(service,
++		VCHIQ_SERVICE_CLOSED, NULL, NULL);
++
++	if (status != VCHIQ_RETRY) {
++		int uc = service->service_use_count;
++		int i;
++		/* Complete the close process */
++		for (i = 0; i < uc; i++)
++			/* cater for cases where close is forced and the
++			** client may not close all it's handles */
++			vchiq_release_service_internal(service);
++
++		service->client_id = 0;
++		service->remoteport = VCHIQ_PORT_FREE;
++
++		if (service->srvstate == VCHIQ_SRVSTATE_CLOSED)
++			vchiq_free_service_internal(service);
++		else if (service->srvstate != VCHIQ_SRVSTATE_CLOSEWAIT) {
++			if (is_server)
++				service->closing = 0;
++
++			up(&service->remove_event);
++		}
++	} else
++		vchiq_set_service_state(service, failstate);
++
++	return status;
++}
++
++/* Called by the slot handler */
++VCHIQ_STATUS_T
++vchiq_close_service_internal(VCHIQ_SERVICE_T *service, int close_recvd)
++{
++	VCHIQ_STATE_T *state = service->state;
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++	int is_server = (service->public_fourcc != VCHIQ_FOURCC_INVALID);
++
++	vchiq_log_info(vchiq_core_log_level, "%d: csi:%d,%d (%s)",
++		service->state->id, service->localport, close_recvd,
++		srvstate_names[service->srvstate]);
++
++	switch (service->srvstate) {
++	case VCHIQ_SRVSTATE_CLOSED:
++	case VCHIQ_SRVSTATE_HIDDEN:
++	case VCHIQ_SRVSTATE_LISTENING:
++	case VCHIQ_SRVSTATE_CLOSEWAIT:
++		if (close_recvd)
++			vchiq_log_error(vchiq_core_log_level,
++				"vchiq_close_service_internal(1) called "
++				"in state %s",
++				srvstate_names[service->srvstate]);
++		else if (is_server) {
++			if (service->srvstate == VCHIQ_SRVSTATE_LISTENING) {
++				status = VCHIQ_ERROR;
++			} else {
++				service->client_id = 0;
++				service->remoteport = VCHIQ_PORT_FREE;
++				if (service->srvstate ==
++					VCHIQ_SRVSTATE_CLOSEWAIT)
++					vchiq_set_service_state(service,
++						VCHIQ_SRVSTATE_LISTENING);
++			}
++			up(&service->remove_event);
++		} else
++			vchiq_free_service_internal(service);
++		break;
++	case VCHIQ_SRVSTATE_OPENING:
++		if (close_recvd) {
++			/* The open was rejected - tell the user */
++			vchiq_set_service_state(service,
++				VCHIQ_SRVSTATE_CLOSEWAIT);
++			up(&service->remove_event);
++		} else {
++			/* Shutdown mid-open - let the other side know */
++			status = queue_message(state, service,
++				VCHIQ_MAKE_MSG
++				(VCHIQ_MSG_CLOSE,
++				service->localport,
++				VCHIQ_MSG_DSTPORT(service->remoteport)),
++				NULL, 0, 0, 0);
++		}
++		break;
++
++	case VCHIQ_SRVSTATE_OPENSYNC:
++		mutex_lock(&state->sync_mutex);
++		/* Drop through */
++
++	case VCHIQ_SRVSTATE_OPEN:
++		if (state->is_master || close_recvd) {
++			if (!do_abort_bulks(service))
++				status = VCHIQ_RETRY;
++		}
++
++		release_service_messages(service);
++
++		if (status == VCHIQ_SUCCESS)
++			status = queue_message(state, service,
++				VCHIQ_MAKE_MSG
++				(VCHIQ_MSG_CLOSE,
++				service->localport,
++				VCHIQ_MSG_DSTPORT(service->remoteport)),
++				NULL, 0, 0, 0);
++
++		if (status == VCHIQ_SUCCESS) {
++			if (!close_recvd)
++				break;
++		} else if (service->srvstate == VCHIQ_SRVSTATE_OPENSYNC) {
++			mutex_unlock(&state->sync_mutex);
++			break;
++		} else
++			break;
++
++		status = close_service_complete(service,
++				VCHIQ_SRVSTATE_CLOSERECVD);
++		break;
++
++	case VCHIQ_SRVSTATE_CLOSESENT:
++		if (!close_recvd)
++			/* This happens when a process is killed mid-close */
++			break;
++
++		if (!state->is_master) {
++			if (!do_abort_bulks(service)) {
++				status = VCHIQ_RETRY;
++				break;
++			}
++		}
++
++		if (status == VCHIQ_SUCCESS)
++			status = close_service_complete(service,
++				VCHIQ_SRVSTATE_CLOSERECVD);
++		break;
++
++	case VCHIQ_SRVSTATE_CLOSERECVD:
++		if (!close_recvd && is_server)
++			/* Force into LISTENING mode */
++			vchiq_set_service_state(service,
++				VCHIQ_SRVSTATE_LISTENING);
++		status = close_service_complete(service,
++			VCHIQ_SRVSTATE_CLOSERECVD);
++		break;
++
++	default:
++		vchiq_log_error(vchiq_core_log_level,
++			"vchiq_close_service_internal(%d) called in state %s",
++			close_recvd, srvstate_names[service->srvstate]);
++		break;
++	}
++
++	return status;
++}
++
++/* Called from the application process upon process death */
++void
++vchiq_terminate_service_internal(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATE_T *state = service->state;
++
++	vchiq_log_info(vchiq_core_log_level, "%d: tsi - (%d<->%d)",
++		state->id, service->localport, service->remoteport);
++
++	mark_service_closing(service);
++
++	/* Mark the service for removal by the slot handler */
++	request_poll(state, service, VCHIQ_POLL_REMOVE);
++}
++
++/* Called from the slot handler */
++void
++vchiq_free_service_internal(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATE_T *state = service->state;
++
++	vchiq_log_info(vchiq_core_log_level, "%d: fsi - (%d)",
++		state->id, service->localport);
++
++	switch (service->srvstate) {
++	case VCHIQ_SRVSTATE_OPENING:
++	case VCHIQ_SRVSTATE_CLOSED:
++	case VCHIQ_SRVSTATE_HIDDEN:
++	case VCHIQ_SRVSTATE_LISTENING:
++	case VCHIQ_SRVSTATE_CLOSEWAIT:
++		break;
++	default:
++		vchiq_log_error(vchiq_core_log_level,
++			"%d: fsi - (%d) in state %s",
++			state->id, service->localport,
++			srvstate_names[service->srvstate]);
++		return;
++	}
++
++	vchiq_set_service_state(service, VCHIQ_SRVSTATE_FREE);
++
++	up(&service->remove_event);
++
++	/* Release the initial lock */
++	unlock_service(service);
++}
++
++VCHIQ_STATUS_T
++vchiq_connect_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_SERVICE_T *service;
++	int i;
++
++	/* Find all services registered to this client and enable them. */
++	i = 0;
++	while ((service = next_service_by_instance(state, instance,
++		&i)) !=	NULL) {
++		if (service->srvstate == VCHIQ_SRVSTATE_HIDDEN)
++			vchiq_set_service_state(service,
++				VCHIQ_SRVSTATE_LISTENING);
++		unlock_service(service);
++	}
++
++	if (state->conn_state == VCHIQ_CONNSTATE_DISCONNECTED) {
++		if (queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(VCHIQ_MSG_CONNECT, 0, 0), NULL, 0,
++			0, 1) == VCHIQ_RETRY)
++			return VCHIQ_RETRY;
++
++		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTING);
++	}
++
++	if (state->conn_state == VCHIQ_CONNSTATE_CONNECTING) {
++		if (down_interruptible(&state->connect) != 0)
++			return VCHIQ_RETRY;
++
++		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTED);
++		up(&state->connect);
++	}
++
++	return VCHIQ_SUCCESS;
++}
++
++VCHIQ_STATUS_T
++vchiq_shutdown_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_SERVICE_T *service;
++	int i;
++
++	/* Find all services registered to this client and enable them. */
++	i = 0;
++	while ((service = next_service_by_instance(state, instance,
++		&i)) !=	NULL) {
++		(void)vchiq_remove_service(service->handle);
++		unlock_service(service);
++	}
++
++	return VCHIQ_SUCCESS;
++}
++
++VCHIQ_STATUS_T
++vchiq_pause_internal(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	switch (state->conn_state) {
++	case VCHIQ_CONNSTATE_CONNECTED:
++		/* Request a pause */
++		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_PAUSING);
++		request_poll(state, NULL, 0);
++		break;
++	default:
++		vchiq_log_error(vchiq_core_log_level,
++			"vchiq_pause_internal in state %s\n",
++			conn_state_names[state->conn_state]);
++		status = VCHIQ_ERROR;
++		VCHIQ_STATS_INC(state, error_count);
++		break;
++	}
++
++	return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_resume_internal(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	if (state->conn_state == VCHIQ_CONNSTATE_PAUSED) {
++		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_RESUMING);
++		request_poll(state, NULL, 0);
++	} else {
++		status = VCHIQ_ERROR;
++		VCHIQ_STATS_INC(state, error_count);
++	}
++
++	return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_close_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	/* Unregister the service */
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	if (!service)
++		return VCHIQ_ERROR;
++
++	vchiq_log_info(vchiq_core_log_level,
++		"%d: close_service:%d",
++		service->state->id, service->localport);
++
++	if ((service->srvstate == VCHIQ_SRVSTATE_FREE) ||
++		(service->srvstate == VCHIQ_SRVSTATE_LISTENING) ||
++		(service->srvstate == VCHIQ_SRVSTATE_HIDDEN)) {
++		unlock_service(service);
++		return VCHIQ_ERROR;
++	}
++
++	mark_service_closing(service);
++
++	if (current == service->state->slot_handler_thread) {
++		status = vchiq_close_service_internal(service,
++			0/*!close_recvd*/);
++		BUG_ON(status == VCHIQ_RETRY);
++	} else {
++	/* Mark the service for termination by the slot handler */
++		request_poll(service->state, service, VCHIQ_POLL_TERMINATE);
++	}
++
++	while (1) {
++		if (down_interruptible(&service->remove_event) != 0) {
++			status = VCHIQ_RETRY;
++			break;
++		}
++
++		if ((service->srvstate == VCHIQ_SRVSTATE_FREE) ||
++			(service->srvstate == VCHIQ_SRVSTATE_LISTENING) ||
++			(service->srvstate == VCHIQ_SRVSTATE_OPEN))
++			break;
++
++		vchiq_log_warning(vchiq_core_log_level,
++			"%d: close_service:%d - waiting in state %s",
++			service->state->id, service->localport,
++			srvstate_names[service->srvstate]);
++	}
++
++	if ((status == VCHIQ_SUCCESS) &&
++		(service->srvstate != VCHIQ_SRVSTATE_FREE) &&
++		(service->srvstate != VCHIQ_SRVSTATE_LISTENING))
++		status = VCHIQ_ERROR;
++
++	unlock_service(service);
++
++	return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_remove_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	/* Unregister the service */
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	if (!service)
++		return VCHIQ_ERROR;
++
++	vchiq_log_info(vchiq_core_log_level,
++		"%d: remove_service:%d",
++		service->state->id, service->localport);
++
++	if (service->srvstate == VCHIQ_SRVSTATE_FREE) {
++		unlock_service(service);
++		return VCHIQ_ERROR;
++	}
++
++	mark_service_closing(service);
++
++	if ((service->srvstate == VCHIQ_SRVSTATE_HIDDEN) ||
++		(current == service->state->slot_handler_thread)) {
++		/* Make it look like a client, because it must be removed and
++		   not left in the LISTENING state. */
++		service->public_fourcc = VCHIQ_FOURCC_INVALID;
++
++		status = vchiq_close_service_internal(service,
++			0/*!close_recvd*/);
++		BUG_ON(status == VCHIQ_RETRY);
++	} else {
++		/* Mark the service for removal by the slot handler */
++		request_poll(service->state, service, VCHIQ_POLL_REMOVE);
++	}
++	while (1) {
++		if (down_interruptible(&service->remove_event) != 0) {
++			status = VCHIQ_RETRY;
++			break;
++		}
++
++		if ((service->srvstate == VCHIQ_SRVSTATE_FREE) ||
++			(service->srvstate == VCHIQ_SRVSTATE_OPEN))
++			break;
++
++		vchiq_log_warning(vchiq_core_log_level,
++			"%d: remove_service:%d - waiting in state %s",
++			service->state->id, service->localport,
++			srvstate_names[service->srvstate]);
++	}
++
++	if ((status == VCHIQ_SUCCESS) &&
++		(service->srvstate != VCHIQ_SRVSTATE_FREE))
++		status = VCHIQ_ERROR;
++
++	unlock_service(service);
++
++	return status;
++}
++
++
++/* This function may be called by kernel threads or user threads.
++ * User threads may receive VCHIQ_RETRY to indicate that a signal has been
++ * received and the call should be retried after being returned to user
++ * context.
++ * When called in blocking mode, the userdata field points to a bulk_waiter
++ * structure.
++ */
++VCHIQ_STATUS_T
++vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
++	VCHI_MEM_HANDLE_T memhandle, void *offset, int size, void *userdata,
++	VCHIQ_BULK_MODE_T mode, VCHIQ_BULK_DIR_T dir)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_BULK_QUEUE_T *queue;
++	VCHIQ_BULK_T *bulk;
++	VCHIQ_STATE_T *state;
++	struct bulk_waiter *bulk_waiter = NULL;
++	const char dir_char = (dir == VCHIQ_BULK_TRANSMIT) ? 't' : 'r';
++	const int dir_msgtype = (dir == VCHIQ_BULK_TRANSMIT) ?
++		VCHIQ_MSG_BULK_TX : VCHIQ_MSG_BULK_RX;
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++
++	if (!service ||
++		 (service->srvstate != VCHIQ_SRVSTATE_OPEN) ||
++		 ((memhandle == VCHI_MEM_HANDLE_INVALID) && (offset == NULL)) ||
++		 (vchiq_check_service(service) != VCHIQ_SUCCESS))
++		goto error_exit;
++
++	switch (mode) {
++	case VCHIQ_BULK_MODE_NOCALLBACK:
++	case VCHIQ_BULK_MODE_CALLBACK:
++		break;
++	case VCHIQ_BULK_MODE_BLOCKING:
++		bulk_waiter = (struct bulk_waiter *)userdata;
++		sema_init(&bulk_waiter->event, 0);
++		bulk_waiter->actual = 0;
++		bulk_waiter->bulk = NULL;
++		break;
++	case VCHIQ_BULK_MODE_WAITING:
++		bulk_waiter = (struct bulk_waiter *)userdata;
++		bulk = bulk_waiter->bulk;
++		goto waiting;
++	default:
++		goto error_exit;
++	}
++
++	state = service->state;
++
++	queue = (dir == VCHIQ_BULK_TRANSMIT) ?
++		&service->bulk_tx : &service->bulk_rx;
++
++	if (mutex_lock_interruptible(&service->bulk_mutex) != 0) {
++		status = VCHIQ_RETRY;
++		goto error_exit;
++	}
++
++	if (queue->local_insert == queue->remove + VCHIQ_NUM_SERVICE_BULKS) {
++		VCHIQ_SERVICE_STATS_INC(service, bulk_stalls);
++		do {
++			mutex_unlock(&service->bulk_mutex);
++			if (down_interruptible(&service->bulk_remove_event)
++				!= 0) {
++				status = VCHIQ_RETRY;
++				goto error_exit;
++			}
++			if (mutex_lock_interruptible(&service->bulk_mutex)
++				!= 0) {
++				status = VCHIQ_RETRY;
++				goto error_exit;
++			}
++		} while (queue->local_insert == queue->remove +
++				VCHIQ_NUM_SERVICE_BULKS);
++	}
++
++	bulk = &queue->bulks[BULK_INDEX(queue->local_insert)];
++
++	bulk->mode = mode;
++	bulk->dir = dir;
++	bulk->userdata = userdata;
++	bulk->size = size;
++	bulk->actual = VCHIQ_BULK_ACTUAL_ABORTED;
++
++	if (vchiq_prepare_bulk_data(bulk, memhandle, offset, size, dir) !=
++		VCHIQ_SUCCESS)
++		goto unlock_error_exit;
++
++	wmb();
++
++	vchiq_log_info(vchiq_core_log_level,
++		"%d: bt (%d->%d) %cx %x@%x %x",
++		state->id,
++		service->localport, service->remoteport, dir_char,
++		size, (unsigned int)bulk->data, (unsigned int)userdata);
++
++	if (state->is_master) {
++		queue->local_insert++;
++		if (resolve_bulks(service, queue))
++			request_poll(state, service,
++				(dir == VCHIQ_BULK_TRANSMIT) ?
++				VCHIQ_POLL_TXNOTIFY : VCHIQ_POLL_RXNOTIFY);
++	} else {
++		int payload[2] = { (int)bulk->data, bulk->size };
++		VCHIQ_ELEMENT_T element = { payload, sizeof(payload) };
++
++		status = queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(dir_msgtype,
++				service->localport, service->remoteport),
++			&element, 1, sizeof(payload), 1);
++		if (status != VCHIQ_SUCCESS) {
++			vchiq_complete_bulk(bulk);
++			goto unlock_error_exit;
++		}
++		queue->local_insert++;
++	}
++
++	mutex_unlock(&service->bulk_mutex);
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%d: bt:%d %cx li=%x ri=%x p=%x",
++		state->id,
++		service->localport, dir_char,
++		queue->local_insert, queue->remote_insert, queue->process);
++
++waiting:
++	unlock_service(service);
++
++	status = VCHIQ_SUCCESS;
++
++	if (bulk_waiter) {
++		bulk_waiter->bulk = bulk;
++		if (down_interruptible(&bulk_waiter->event) != 0)
++			status = VCHIQ_RETRY;
++		else if (bulk_waiter->actual == VCHIQ_BULK_ACTUAL_ABORTED)
++			status = VCHIQ_ERROR;
++	}
++
++	return status;
++
++unlock_error_exit:
++	mutex_unlock(&service->bulk_mutex);
++
++error_exit:
++	if (service)
++		unlock_service(service);
++	return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_queue_message(VCHIQ_SERVICE_HANDLE_T handle,
++	const VCHIQ_ELEMENT_T *elements, unsigned int count)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++
++	unsigned int size = 0;
++	unsigned int i;
++
++	if (!service ||
++		(vchiq_check_service(service) != VCHIQ_SUCCESS))
++		goto error_exit;
++
++	for (i = 0; i < (unsigned int)count; i++) {
++		if (elements[i].size) {
++			if (elements[i].data == NULL) {
++				VCHIQ_SERVICE_STATS_INC(service, error_count);
++				goto error_exit;
++			}
++			size += elements[i].size;
++		}
++	}
++
++	if (size > VCHIQ_MAX_MSG_SIZE) {
++		VCHIQ_SERVICE_STATS_INC(service, error_count);
++		goto error_exit;
++	}
++
++	switch (service->srvstate) {
++	case VCHIQ_SRVSTATE_OPEN:
++		status = queue_message(service->state, service,
++				VCHIQ_MAKE_MSG(VCHIQ_MSG_DATA,
++					service->localport,
++					service->remoteport),
++				elements, count, size, 1);
++		break;
++	case VCHIQ_SRVSTATE_OPENSYNC:
++		status = queue_message_sync(service->state, service,
++				VCHIQ_MAKE_MSG(VCHIQ_MSG_DATA,
++					service->localport,
++					service->remoteport),
++				elements, count, size, 1);
++		break;
++	default:
++		status = VCHIQ_ERROR;
++		break;
++	}
++
++error_exit:
++	if (service)
++		unlock_service(service);
++
++	return status;
++}
++
++void
++vchiq_release_message(VCHIQ_SERVICE_HANDLE_T handle, VCHIQ_HEADER_T *header)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_SHARED_STATE_T *remote;
++	VCHIQ_STATE_T *state;
++	int slot_index;
++
++	if (!service)
++		return;
++
++	state = service->state;
++	remote = state->remote;
++
++	slot_index = SLOT_INDEX_FROM_DATA(state, (void *)header);
++
++	if ((slot_index >= remote->slot_first) &&
++		(slot_index <= remote->slot_last)) {
++		int msgid = header->msgid;
++		if (msgid & VCHIQ_MSGID_CLAIMED) {
++			VCHIQ_SLOT_INFO_T *slot_info =
++				SLOT_INFO_FROM_INDEX(state, slot_index);
++
++			release_slot(state, slot_info, header, service);
++		}
++	} else if (slot_index == remote->slot_sync)
++		release_message_sync(state, header);
++
++	unlock_service(service);
++}
++
++static void
++release_message_sync(VCHIQ_STATE_T *state, VCHIQ_HEADER_T *header)
++{
++	header->msgid = VCHIQ_MSGID_PADDING;
++	wmb();
++	remote_event_signal(&state->remote->sync_release);
++}
++
++VCHIQ_STATUS_T
++vchiq_get_peer_version(VCHIQ_SERVICE_HANDLE_T handle, short *peer_version)
++{
++   VCHIQ_STATUS_T status = VCHIQ_ERROR;
++   VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++
++   if (!service ||
++      (vchiq_check_service(service) != VCHIQ_SUCCESS) ||
++      !peer_version)
++      goto exit;
++   *peer_version = service->peer_version;
++   status = VCHIQ_SUCCESS;
++
++exit:
++   if (service)
++      unlock_service(service);
++   return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_get_config(VCHIQ_INSTANCE_T instance,
++	int config_size, VCHIQ_CONFIG_T *pconfig)
++{
++	VCHIQ_CONFIG_T config;
++
++	(void)instance;
++
++	config.max_msg_size           = VCHIQ_MAX_MSG_SIZE;
++	config.bulk_threshold         = VCHIQ_MAX_MSG_SIZE;
++	config.max_outstanding_bulks  = VCHIQ_NUM_SERVICE_BULKS;
++	config.max_services           = VCHIQ_MAX_SERVICES;
++	config.version                = VCHIQ_VERSION;
++	config.version_min            = VCHIQ_VERSION_MIN;
++
++	if (config_size > sizeof(VCHIQ_CONFIG_T))
++		return VCHIQ_ERROR;
++
++	memcpy(pconfig, &config,
++		min(config_size, (int)(sizeof(VCHIQ_CONFIG_T))));
++
++	return VCHIQ_SUCCESS;
++}
++
++VCHIQ_STATUS_T
++vchiq_set_service_option(VCHIQ_SERVICE_HANDLE_T handle,
++	VCHIQ_SERVICE_OPTION_T option, int value)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++
++	if (service) {
++		switch (option) {
++		case VCHIQ_SERVICE_OPTION_AUTOCLOSE:
++			service->auto_close = value;
++			status = VCHIQ_SUCCESS;
++			break;
++
++		case VCHIQ_SERVICE_OPTION_SLOT_QUOTA: {
++			VCHIQ_SERVICE_QUOTA_T *service_quota =
++				&service->state->service_quotas[
++					service->localport];
++			if (value == 0)
++				value = service->state->default_slot_quota;
++			if ((value >= service_quota->slot_use_count) &&
++				 (value < (unsigned short)~0)) {
++				service_quota->slot_quota = value;
++				if ((value >= service_quota->slot_use_count) &&
++					(service_quota->message_quota >=
++					 service_quota->message_use_count)) {
++					/* Signal the service that it may have
++					** dropped below its quota */
++					up(&service_quota->quota_event);
++				}
++				status = VCHIQ_SUCCESS;
++			}
++		} break;
++
++		case VCHIQ_SERVICE_OPTION_MESSAGE_QUOTA: {
++			VCHIQ_SERVICE_QUOTA_T *service_quota =
++				&service->state->service_quotas[
++					service->localport];
++			if (value == 0)
++				value = service->state->default_message_quota;
++			if ((value >= service_quota->message_use_count) &&
++				 (value < (unsigned short)~0)) {
++				service_quota->message_quota = value;
++				if ((value >=
++					service_quota->message_use_count) &&
++					(service_quota->slot_quota >=
++					service_quota->slot_use_count))
++					/* Signal the service that it may have
++					** dropped below its quota */
++					up(&service_quota->quota_event);
++				status = VCHIQ_SUCCESS;
++			}
++		} break;
++
++		case VCHIQ_SERVICE_OPTION_SYNCHRONOUS:
++			if ((service->srvstate == VCHIQ_SRVSTATE_HIDDEN) ||
++				(service->srvstate ==
++				VCHIQ_SRVSTATE_LISTENING)) {
++				service->sync = value;
++				status = VCHIQ_SUCCESS;
++			}
++			break;
++
++		default:
++			break;
++		}
++		unlock_service(service);
++	}
++
++	return status;
++}
++
++void
++vchiq_dump_shared_state(void *dump_context, VCHIQ_STATE_T *state,
++	VCHIQ_SHARED_STATE_T *shared, const char *label)
++{
++	static const char *const debug_names[] = {
++		"<entries>",
++		"SLOT_HANDLER_COUNT",
++		"SLOT_HANDLER_LINE",
++		"PARSE_LINE",
++		"PARSE_HEADER",
++		"PARSE_MSGID",
++		"AWAIT_COMPLETION_LINE",
++		"DEQUEUE_MESSAGE_LINE",
++		"SERVICE_CALLBACK_LINE",
++		"MSG_QUEUE_FULL_COUNT",
++		"COMPLETION_QUEUE_FULL_COUNT"
++	};
++	int i;
++
++	char buf[80];
++	int len;
++	len = snprintf(buf, sizeof(buf),
++		"  %s: slots %d-%d tx_pos=%x recycle=%x",
++		label, shared->slot_first, shared->slot_last,
++		shared->tx_pos, shared->slot_queue_recycle);
++	vchiq_dump(dump_context, buf, len + 1);
++
++	len = snprintf(buf, sizeof(buf),
++		"    Slots claimed:");
++	vchiq_dump(dump_context, buf, len + 1);
++
++	for (i = shared->slot_first; i <= shared->slot_last; i++) {
++		VCHIQ_SLOT_INFO_T slot_info = *SLOT_INFO_FROM_INDEX(state, i);
++		if (slot_info.use_count != slot_info.release_count) {
++			len = snprintf(buf, sizeof(buf),
++				"      %d: %d/%d", i, slot_info.use_count,
++				slot_info.release_count);
++			vchiq_dump(dump_context, buf, len + 1);
++		}
++	}
++
++	for (i = 1; i < shared->debug[DEBUG_ENTRIES]; i++) {
++		len = snprintf(buf, sizeof(buf), "    DEBUG: %s = %d(%x)",
++			debug_names[i], shared->debug[i], shared->debug[i]);
++		vchiq_dump(dump_context, buf, len + 1);
++	}
++}
++
++void
++vchiq_dump_state(void *dump_context, VCHIQ_STATE_T *state)
++{
++	char buf[80];
++	int len;
++	int i;
++
++	len = snprintf(buf, sizeof(buf), "State %d: %s", state->id,
++		conn_state_names[state->conn_state]);
++	vchiq_dump(dump_context, buf, len + 1);
++
++	len = snprintf(buf, sizeof(buf),
++		"  tx_pos=%x(@%x), rx_pos=%x(@%x)",
++		state->local->tx_pos,
++		(uint32_t)state->tx_data +
++			(state->local_tx_pos & VCHIQ_SLOT_MASK),
++		state->rx_pos,
++		(uint32_t)state->rx_data +
++			(state->rx_pos & VCHIQ_SLOT_MASK));
++	vchiq_dump(dump_context, buf, len + 1);
++
++	len = snprintf(buf, sizeof(buf),
++		"  Version: %d (min %d)",
++		VCHIQ_VERSION, VCHIQ_VERSION_MIN);
++	vchiq_dump(dump_context, buf, len + 1);
++
++	if (VCHIQ_ENABLE_STATS) {
++		len = snprintf(buf, sizeof(buf),
++			"  Stats: ctrl_tx_count=%d, ctrl_rx_count=%d, "
++			"error_count=%d",
++			state->stats.ctrl_tx_count, state->stats.ctrl_rx_count,
++			state->stats.error_count);
++		vchiq_dump(dump_context, buf, len + 1);
++	}
++
++	len = snprintf(buf, sizeof(buf),
++		"  Slots: %d available (%d data), %d recyclable, %d stalls "
++		"(%d data)",
++		((state->slot_queue_available * VCHIQ_SLOT_SIZE) -
++			state->local_tx_pos) / VCHIQ_SLOT_SIZE,
++		state->data_quota - state->data_use_count,
++		state->local->slot_queue_recycle - state->slot_queue_available,
++		state->stats.slot_stalls, state->stats.data_stalls);
++	vchiq_dump(dump_context, buf, len + 1);
++
++	vchiq_dump_platform_state(dump_context);
++
++	vchiq_dump_shared_state(dump_context, state, state->local, "Local");
++	vchiq_dump_shared_state(dump_context, state, state->remote, "Remote");
++
++	vchiq_dump_platform_instances(dump_context);
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = find_service_by_port(state, i);
++
++		if (service) {
++			vchiq_dump_service_state(dump_context, service);
++			unlock_service(service);
++		}
++	}
++}
++
++void
++vchiq_dump_service_state(void *dump_context, VCHIQ_SERVICE_T *service)
++{
++	char buf[80];
++	int len;
++
++	len = snprintf(buf, sizeof(buf), "Service %d: %s (ref %u)",
++		service->localport, srvstate_names[service->srvstate],
++		service->ref_count - 1); /*Don't include the lock just taken*/
++
++	if (service->srvstate != VCHIQ_SRVSTATE_FREE) {
++		char remoteport[30];
++		VCHIQ_SERVICE_QUOTA_T *service_quota =
++			&service->state->service_quotas[service->localport];
++		int fourcc = service->base.fourcc;
++		int tx_pending, rx_pending;
++		if (service->remoteport != VCHIQ_PORT_FREE) {
++			int len2 = snprintf(remoteport, sizeof(remoteport),
++				"%d", service->remoteport);
++			if (service->public_fourcc != VCHIQ_FOURCC_INVALID)
++				snprintf(remoteport + len2,
++					sizeof(remoteport) - len2,
++					" (client %x)", service->client_id);
++		} else
++			strcpy(remoteport, "n/a");
++
++		len += snprintf(buf + len, sizeof(buf) - len,
++			" '%c%c%c%c' remote %s (msg use %d/%d, slot use %d/%d)",
++			VCHIQ_FOURCC_AS_4CHARS(fourcc),
++			remoteport,
++			service_quota->message_use_count,
++			service_quota->message_quota,
++			service_quota->slot_use_count,
++			service_quota->slot_quota);
++
++		vchiq_dump(dump_context, buf, len + 1);
++
++		tx_pending = service->bulk_tx.local_insert -
++			service->bulk_tx.remote_insert;
++
++		rx_pending = service->bulk_rx.local_insert -
++			service->bulk_rx.remote_insert;
++
++		len = snprintf(buf, sizeof(buf),
++			"  Bulk: tx_pending=%d (size %d),"
++			" rx_pending=%d (size %d)",
++			tx_pending,
++			tx_pending ? service->bulk_tx.bulks[
++			BULK_INDEX(service->bulk_tx.remove)].size : 0,
++			rx_pending,
++			rx_pending ? service->bulk_rx.bulks[
++			BULK_INDEX(service->bulk_rx.remove)].size : 0);
++
++		if (VCHIQ_ENABLE_STATS) {
++			vchiq_dump(dump_context, buf, len + 1);
++
++			len = snprintf(buf, sizeof(buf),
++				"  Ctrl: tx_count=%d, tx_bytes=%llu, "
++				"rx_count=%d, rx_bytes=%llu",
++				service->stats.ctrl_tx_count,
++				service->stats.ctrl_tx_bytes,
++				service->stats.ctrl_rx_count,
++				service->stats.ctrl_rx_bytes);
++			vchiq_dump(dump_context, buf, len + 1);
++
++			len = snprintf(buf, sizeof(buf),
++				"  Bulk: tx_count=%d, tx_bytes=%llu, "
++				"rx_count=%d, rx_bytes=%llu",
++				service->stats.bulk_tx_count,
++				service->stats.bulk_tx_bytes,
++				service->stats.bulk_rx_count,
++				service->stats.bulk_rx_bytes);
++			vchiq_dump(dump_context, buf, len + 1);
++
++			len = snprintf(buf, sizeof(buf),
++				"  %d quota stalls, %d slot stalls, "
++				"%d bulk stalls, %d aborted, %d errors",
++				service->stats.quota_stalls,
++				service->stats.slot_stalls,
++				service->stats.bulk_stalls,
++				service->stats.bulk_aborted_count,
++				service->stats.error_count);
++		 }
++	}
++
++	vchiq_dump(dump_context, buf, len + 1);
++
++	if (service->srvstate != VCHIQ_SRVSTATE_FREE)
++		vchiq_dump_platform_service_state(dump_context, service);
++}
++
++
++void
++vchiq_loud_error_header(void)
++{
++	vchiq_log_error(vchiq_core_log_level,
++		"============================================================"
++		"================");
++	vchiq_log_error(vchiq_core_log_level,
++		"============================================================"
++		"================");
++	vchiq_log_error(vchiq_core_log_level, "=====");
++}
++
++void
++vchiq_loud_error_footer(void)
++{
++	vchiq_log_error(vchiq_core_log_level, "=====");
++	vchiq_log_error(vchiq_core_log_level,
++		"============================================================"
++		"================");
++	vchiq_log_error(vchiq_core_log_level,
++		"============================================================"
++		"================");
++}
++
++
++VCHIQ_STATUS_T vchiq_send_remote_use(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_RETRY;
++	if (state->conn_state != VCHIQ_CONNSTATE_DISCONNECTED)
++		status = queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(VCHIQ_MSG_REMOTE_USE, 0, 0),
++			NULL, 0, 0, 0);
++	return status;
++}
++
++VCHIQ_STATUS_T vchiq_send_remote_release(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_RETRY;
++	if (state->conn_state != VCHIQ_CONNSTATE_DISCONNECTED)
++		status = queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(VCHIQ_MSG_REMOTE_RELEASE, 0, 0),
++			NULL, 0, 0, 0);
++	return status;
++}
++
++VCHIQ_STATUS_T vchiq_send_remote_use_active(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_RETRY;
++	if (state->conn_state != VCHIQ_CONNSTATE_DISCONNECTED)
++		status = queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(VCHIQ_MSG_REMOTE_USE_ACTIVE, 0, 0),
++			NULL, 0, 0, 0);
++	return status;
++}
++
++void vchiq_log_dump_mem(const char *label, uint32_t addr, const void *voidMem,
++	size_t numBytes)
++{
++	const uint8_t  *mem = (const uint8_t *)voidMem;
++	size_t          offset;
++	char            lineBuf[100];
++	char           *s;
++
++	while (numBytes > 0) {
++		s = lineBuf;
++
++		for (offset = 0; offset < 16; offset++) {
++			if (offset < numBytes)
++				s += snprintf(s, 4, "%02x ", mem[offset]);
++			else
++				s += snprintf(s, 4, "   ");
++		}
++
++		for (offset = 0; offset < 16; offset++) {
++			if (offset < numBytes) {
++				uint8_t ch = mem[offset];
++
++				if ((ch < ' ') || (ch > '~'))
++					ch = '.';
++				*s++ = (char)ch;
++			}
++		}
++		*s++ = '\0';
++
++		if ((label != NULL) && (*label != '\0'))
++			vchiq_log_trace(VCHIQ_LOG_TRACE,
++				"%s: %08x: %s", label, addr, lineBuf);
++		else
++			vchiq_log_trace(VCHIQ_LOG_TRACE,
++				"%08x: %s", addr, lineBuf);
++
++		addr += 16;
++		mem += 16;
++		if (numBytes > 16)
++			numBytes -= 16;
++		else
++			numBytes = 0;
++	}
++}
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,703 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_CORE_H
++#define VCHIQ_CORE_H
++
++#include <linux/mutex.h>
++#include <linux/semaphore.h>
++#include <linux/kthread.h>
++
++#include "vchiq_cfg.h"
++
++#include "vchiq.h"
++
++/* Run time control of log level, based on KERN_XXX level. */
++#define VCHIQ_LOG_DEFAULT  4
++#define VCHIQ_LOG_ERROR    3
++#define VCHIQ_LOG_WARNING  4
++#define VCHIQ_LOG_INFO     6
++#define VCHIQ_LOG_TRACE    7
++
++#define VCHIQ_LOG_PREFIX   KERN_INFO "vchiq: "
++
++#ifndef vchiq_log_error
++#define vchiq_log_error(cat, fmt, ...) \
++	do { if (cat >= VCHIQ_LOG_ERROR) \
++		printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0)
++#endif
++#ifndef vchiq_log_warning
++#define vchiq_log_warning(cat, fmt, ...) \
++	do { if (cat >= VCHIQ_LOG_WARNING) \
++		 printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0)
++#endif
++#ifndef vchiq_log_info
++#define vchiq_log_info(cat, fmt, ...) \
++	do { if (cat >= VCHIQ_LOG_INFO) \
++		printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0)
++#endif
++#ifndef vchiq_log_trace
++#define vchiq_log_trace(cat, fmt, ...) \
++	do { if (cat >= VCHIQ_LOG_TRACE) \
++		printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0)
++#endif
++
++#define vchiq_loud_error(...) \
++	vchiq_log_error(vchiq_core_log_level, "===== " __VA_ARGS__)
++
++#ifndef vchiq_static_assert
++#define vchiq_static_assert(cond) __attribute__((unused)) \
++	extern int vchiq_static_assert[(cond) ? 1 : -1]
++#endif
++
++#define IS_POW2(x) (x && ((x & (x - 1)) == 0))
++
++/* Ensure that the slot size and maximum number of slots are powers of 2 */
++vchiq_static_assert(IS_POW2(VCHIQ_SLOT_SIZE));
++vchiq_static_assert(IS_POW2(VCHIQ_MAX_SLOTS));
++vchiq_static_assert(IS_POW2(VCHIQ_MAX_SLOTS_PER_SIDE));
++
++#define VCHIQ_SLOT_MASK        (VCHIQ_SLOT_SIZE - 1)
++#define VCHIQ_SLOT_QUEUE_MASK  (VCHIQ_MAX_SLOTS_PER_SIDE - 1)
++#define VCHIQ_SLOT_ZERO_SLOTS  ((sizeof(VCHIQ_SLOT_ZERO_T) + \
++	VCHIQ_SLOT_SIZE - 1) / VCHIQ_SLOT_SIZE)
++
++#define VCHIQ_MSG_PADDING            0  /* -                                 */
++#define VCHIQ_MSG_CONNECT            1  /* -                                 */
++#define VCHIQ_MSG_OPEN               2  /* + (srcport, -), fourcc, client_id */
++#define VCHIQ_MSG_OPENACK            3  /* + (srcport, dstport)              */
++#define VCHIQ_MSG_CLOSE              4  /* + (srcport, dstport)              */
++#define VCHIQ_MSG_DATA               5  /* + (srcport, dstport)              */
++#define VCHIQ_MSG_BULK_RX            6  /* + (srcport, dstport), data, size  */
++#define VCHIQ_MSG_BULK_TX            7  /* + (srcport, dstport), data, size  */
++#define VCHIQ_MSG_BULK_RX_DONE       8  /* + (srcport, dstport), actual      */
++#define VCHIQ_MSG_BULK_TX_DONE       9  /* + (srcport, dstport), actual      */
++#define VCHIQ_MSG_PAUSE             10  /* -                                 */
++#define VCHIQ_MSG_RESUME            11  /* -                                 */
++#define VCHIQ_MSG_REMOTE_USE        12  /* -                                 */
++#define VCHIQ_MSG_REMOTE_RELEASE    13  /* -                                 */
++#define VCHIQ_MSG_REMOTE_USE_ACTIVE 14  /* -                                 */
++
++#define VCHIQ_PORT_MAX                 (VCHIQ_MAX_SERVICES - 1)
++#define VCHIQ_PORT_FREE                0x1000
++#define VCHIQ_PORT_IS_VALID(port)      (port < VCHIQ_PORT_FREE)
++#define VCHIQ_MAKE_MSG(type, srcport, dstport) \
++	((type<<24) | (srcport<<12) | (dstport<<0))
++#define VCHIQ_MSG_TYPE(msgid)          ((unsigned int)msgid >> 24)
++#define VCHIQ_MSG_SRCPORT(msgid) \
++	(unsigned short)(((unsigned int)msgid >> 12) & 0xfff)
++#define VCHIQ_MSG_DSTPORT(msgid) \
++	((unsigned short)msgid & 0xfff)
++
++#define VCHIQ_FOURCC_AS_4CHARS(fourcc)	\
++	((fourcc) >> 24) & 0xff, \
++	((fourcc) >> 16) & 0xff, \
++	((fourcc) >>  8) & 0xff, \
++	(fourcc) & 0xff
++
++/* Ensure the fields are wide enough */
++vchiq_static_assert(VCHIQ_MSG_SRCPORT(VCHIQ_MAKE_MSG(0, 0, VCHIQ_PORT_MAX))
++	== 0);
++vchiq_static_assert(VCHIQ_MSG_TYPE(VCHIQ_MAKE_MSG(0, VCHIQ_PORT_MAX, 0)) == 0);
++vchiq_static_assert((unsigned int)VCHIQ_PORT_MAX <
++	(unsigned int)VCHIQ_PORT_FREE);
++
++#define VCHIQ_MSGID_PADDING            VCHIQ_MAKE_MSG(VCHIQ_MSG_PADDING, 0, 0)
++#define VCHIQ_MSGID_CLAIMED            0x40000000
++
++#define VCHIQ_FOURCC_INVALID           0x00000000
++#define VCHIQ_FOURCC_IS_LEGAL(fourcc)  (fourcc != VCHIQ_FOURCC_INVALID)
++
++#define VCHIQ_BULK_ACTUAL_ABORTED -1
++
++typedef uint32_t BITSET_T;
++
++vchiq_static_assert((sizeof(BITSET_T) * 8) == 32);
++
++#define BITSET_SIZE(b)        ((b + 31) >> 5)
++#define BITSET_WORD(b)        (b >> 5)
++#define BITSET_BIT(b)         (1 << (b & 31))
++#define BITSET_ZERO(bs)       memset(bs, 0, sizeof(bs))
++#define BITSET_IS_SET(bs, b)  (bs[BITSET_WORD(b)] & BITSET_BIT(b))
++#define BITSET_SET(bs, b)     (bs[BITSET_WORD(b)] |= BITSET_BIT(b))
++#define BITSET_CLR(bs, b)     (bs[BITSET_WORD(b)] &= ~BITSET_BIT(b))
++
++#if VCHIQ_ENABLE_STATS
++#define VCHIQ_STATS_INC(state, stat) (state->stats. stat++)
++#define VCHIQ_SERVICE_STATS_INC(service, stat) (service->stats. stat++)
++#define VCHIQ_SERVICE_STATS_ADD(service, stat, addend) \
++	(service->stats. stat += addend)
++#else
++#define VCHIQ_STATS_INC(state, stat) ((void)0)
++#define VCHIQ_SERVICE_STATS_INC(service, stat) ((void)0)
++#define VCHIQ_SERVICE_STATS_ADD(service, stat, addend) ((void)0)
++#endif
++
++enum {
++	DEBUG_ENTRIES,
++#if VCHIQ_ENABLE_DEBUG
++	DEBUG_SLOT_HANDLER_COUNT,
++	DEBUG_SLOT_HANDLER_LINE,
++	DEBUG_PARSE_LINE,
++	DEBUG_PARSE_HEADER,
++	DEBUG_PARSE_MSGID,
++	DEBUG_AWAIT_COMPLETION_LINE,
++	DEBUG_DEQUEUE_MESSAGE_LINE,
++	DEBUG_SERVICE_CALLBACK_LINE,
++	DEBUG_MSG_QUEUE_FULL_COUNT,
++	DEBUG_COMPLETION_QUEUE_FULL_COUNT,
++#endif
++	DEBUG_MAX
++};
++
++#if VCHIQ_ENABLE_DEBUG
++
++#define DEBUG_INITIALISE(local) int *debug_ptr = (local)->debug;
++#define DEBUG_TRACE(d) \
++	do { debug_ptr[DEBUG_ ## d] = __LINE__; dsb(); } while (0)
++#define DEBUG_VALUE(d, v) \
++	do { debug_ptr[DEBUG_ ## d] = (v); dsb(); } while (0)
++#define DEBUG_COUNT(d) \
++	do { debug_ptr[DEBUG_ ## d]++; dsb(); } while (0)
++
++#else /* VCHIQ_ENABLE_DEBUG */
++
++#define DEBUG_INITIALISE(local)
++#define DEBUG_TRACE(d)
++#define DEBUG_VALUE(d, v)
++#define DEBUG_COUNT(d)
++
++#endif /* VCHIQ_ENABLE_DEBUG */
++
++typedef enum {
++	VCHIQ_CONNSTATE_DISCONNECTED,
++	VCHIQ_CONNSTATE_CONNECTING,
++	VCHIQ_CONNSTATE_CONNECTED,
++	VCHIQ_CONNSTATE_PAUSING,
++	VCHIQ_CONNSTATE_PAUSE_SENT,
++	VCHIQ_CONNSTATE_PAUSED,
++	VCHIQ_CONNSTATE_RESUMING,
++	VCHIQ_CONNSTATE_PAUSE_TIMEOUT,
++	VCHIQ_CONNSTATE_RESUME_TIMEOUT
++} VCHIQ_CONNSTATE_T;
++
++enum {
++	VCHIQ_SRVSTATE_FREE,
++	VCHIQ_SRVSTATE_HIDDEN,
++	VCHIQ_SRVSTATE_LISTENING,
++	VCHIQ_SRVSTATE_OPENING,
++	VCHIQ_SRVSTATE_OPEN,
++	VCHIQ_SRVSTATE_OPENSYNC,
++	VCHIQ_SRVSTATE_CLOSESENT,
++	VCHIQ_SRVSTATE_CLOSERECVD,
++	VCHIQ_SRVSTATE_CLOSEWAIT,
++	VCHIQ_SRVSTATE_CLOSED
++};
++
++enum {
++	VCHIQ_POLL_TERMINATE,
++	VCHIQ_POLL_REMOVE,
++	VCHIQ_POLL_TXNOTIFY,
++	VCHIQ_POLL_RXNOTIFY,
++	VCHIQ_POLL_COUNT
++};
++
++typedef enum {
++	VCHIQ_BULK_TRANSMIT,
++	VCHIQ_BULK_RECEIVE
++} VCHIQ_BULK_DIR_T;
++
++typedef struct vchiq_bulk_struct {
++	short mode;
++	short dir;
++	void *userdata;
++	VCHI_MEM_HANDLE_T handle;
++	void *data;
++	int size;
++	void *remote_data;
++	int remote_size;
++	int actual;
++} VCHIQ_BULK_T;
++
++typedef struct vchiq_bulk_queue_struct {
++	int local_insert;  /* Where to insert the next local bulk */
++	int remote_insert; /* Where to insert the next remote bulk (master) */
++	int process;       /* Bulk to transfer next */
++	int remote_notify; /* Bulk to notify the remote client of next (mstr) */
++	int remove;        /* Bulk to notify the local client of, and remove,
++			   ** next */
++	VCHIQ_BULK_T bulks[VCHIQ_NUM_SERVICE_BULKS];
++} VCHIQ_BULK_QUEUE_T;
++
++typedef struct remote_event_struct {
++	int armed;
++	int fired;
++	struct semaphore *event;
++} REMOTE_EVENT_T;
++
++typedef struct opaque_platform_state_t *VCHIQ_PLATFORM_STATE_T;
++
++typedef struct vchiq_state_struct VCHIQ_STATE_T;
++
++typedef struct vchiq_slot_struct {
++	char data[VCHIQ_SLOT_SIZE];
++} VCHIQ_SLOT_T;
++
++typedef struct vchiq_slot_info_struct {
++	/* Use two counters rather than one to avoid the need for a mutex. */
++	short use_count;
++	short release_count;
++} VCHIQ_SLOT_INFO_T;
++
++typedef struct vchiq_service_struct {
++	VCHIQ_SERVICE_BASE_T base;
++	VCHIQ_SERVICE_HANDLE_T handle;
++	unsigned int ref_count;
++	int srvstate;
++	unsigned int localport;
++	unsigned int remoteport;
++	int public_fourcc;
++	int client_id;
++	char auto_close;
++	char sync;
++	char closing;
++	atomic_t poll_flags;
++	short version;
++	short version_min;
++	short peer_version;
++
++	VCHIQ_STATE_T *state;
++	VCHIQ_INSTANCE_T instance;
++
++	int service_use_count;
++
++	VCHIQ_BULK_QUEUE_T bulk_tx;
++	VCHIQ_BULK_QUEUE_T bulk_rx;
++
++	struct semaphore remove_event;
++	struct semaphore bulk_remove_event;
++	struct mutex bulk_mutex;
++
++	struct service_stats_struct {
++		int quota_stalls;
++		int slot_stalls;
++		int bulk_stalls;
++		int error_count;
++		int ctrl_tx_count;
++		int ctrl_rx_count;
++		int bulk_tx_count;
++		int bulk_rx_count;
++		int bulk_aborted_count;
++		uint64_t ctrl_tx_bytes;
++		uint64_t ctrl_rx_bytes;
++		uint64_t bulk_tx_bytes;
++		uint64_t bulk_rx_bytes;
++	} stats;
++} VCHIQ_SERVICE_T;
++
++/* The quota information is outside VCHIQ_SERVICE_T so that it can be
++	statically allocated, since for accounting reasons a service's slot
++	usage is carried over between users of the same port number.
++ */
++typedef struct vchiq_service_quota_struct {
++	unsigned short slot_quota;
++	unsigned short slot_use_count;
++	unsigned short message_quota;
++	unsigned short message_use_count;
++	struct semaphore quota_event;
++	int previous_tx_index;
++} VCHIQ_SERVICE_QUOTA_T;
++
++typedef struct vchiq_shared_state_struct {
++
++	/* A non-zero value here indicates that the content is valid. */
++	int initialised;
++
++	/* The first and last (inclusive) slots allocated to the owner. */
++	int slot_first;
++	int slot_last;
++
++	/* The slot allocated to synchronous messages from the owner. */
++	int slot_sync;
++
++	/* Signalling this event indicates that owner's slot handler thread
++	** should run. */
++	REMOTE_EVENT_T trigger;
++
++	/* Indicates the byte position within the stream where the next message
++	** will be written. The least significant bits are an index into the
++	** slot. The next bits are the index of the slot in slot_queue. */
++	int tx_pos;
++
++	/* This event should be signalled when a slot is recycled. */
++	REMOTE_EVENT_T recycle;
++
++	/* The slot_queue index where the next recycled slot will be written. */
++	int slot_queue_recycle;
++
++	/* This event should be signalled when a synchronous message is sent. */
++	REMOTE_EVENT_T sync_trigger;
++
++	/* This event should be signalled when a synchronous message has been
++	** released. */
++	REMOTE_EVENT_T sync_release;
++
++	/* A circular buffer of slot indexes. */
++	int slot_queue[VCHIQ_MAX_SLOTS_PER_SIDE];
++
++	/* Debugging state */
++	int debug[DEBUG_MAX];
++} VCHIQ_SHARED_STATE_T;
++
++typedef struct vchiq_slot_zero_struct {
++	int magic;
++	short version;
++	short version_min;
++	int slot_zero_size;
++	int slot_size;
++	int max_slots;
++	int max_slots_per_side;
++	int platform_data[2];
++	VCHIQ_SHARED_STATE_T master;
++	VCHIQ_SHARED_STATE_T slave;
++	VCHIQ_SLOT_INFO_T slots[VCHIQ_MAX_SLOTS];
++} VCHIQ_SLOT_ZERO_T;
++
++struct vchiq_state_struct {
++	int id;
++	int initialised;
++	VCHIQ_CONNSTATE_T conn_state;
++	int is_master;
++
++	VCHIQ_SHARED_STATE_T *local;
++	VCHIQ_SHARED_STATE_T *remote;
++	VCHIQ_SLOT_T *slot_data;
++
++	unsigned short default_slot_quota;
++	unsigned short default_message_quota;
++
++	/* Event indicating connect message received */
++	struct semaphore connect;
++
++	/* Mutex protecting services */
++	struct mutex mutex;
++	VCHIQ_INSTANCE_T *instance;
++
++	/* Processes incoming messages */
++	struct task_struct *slot_handler_thread;
++
++	/* Processes recycled slots */
++	struct task_struct *recycle_thread;
++
++	/* Processes synchronous messages */
++	struct task_struct *sync_thread;
++
++	/* Local implementation of the trigger remote event */
++	struct semaphore trigger_event;
++
++	/* Local implementation of the recycle remote event */
++	struct semaphore recycle_event;
++
++	/* Local implementation of the sync trigger remote event */
++	struct semaphore sync_trigger_event;
++
++	/* Local implementation of the sync release remote event */
++	struct semaphore sync_release_event;
++
++	char *tx_data;
++	char *rx_data;
++	VCHIQ_SLOT_INFO_T *rx_info;
++
++	struct mutex slot_mutex;
++
++	struct mutex recycle_mutex;
++
++	struct mutex sync_mutex;
++
++	struct mutex bulk_transfer_mutex;
++
++	/* Indicates the byte position within the stream from where the next
++	** message will be read. The least significant bits are an index into
++	** the slot.The next bits are the index of the slot in
++	** remote->slot_queue. */
++	int rx_pos;
++
++	/* A cached copy of local->tx_pos. Only write to local->tx_pos, and read
++		from remote->tx_pos. */
++	int local_tx_pos;
++
++	/* The slot_queue index of the slot to become available next. */
++	int slot_queue_available;
++
++	/* A flag to indicate if any poll has been requested */
++	int poll_needed;
++
++	/* Ths index of the previous slot used for data messages. */
++	int previous_data_index;
++
++	/* The number of slots occupied by data messages. */
++	unsigned short data_use_count;
++
++	/* The maximum number of slots to be occupied by data messages. */
++	unsigned short data_quota;
++
++	/* An array of bit sets indicating which services must be polled. */
++	atomic_t poll_services[BITSET_SIZE(VCHIQ_MAX_SERVICES)];
++
++	/* The number of the first unused service */
++	int unused_service;
++
++	/* Signalled when a free slot becomes available. */
++	struct semaphore slot_available_event;
++
++	struct semaphore slot_remove_event;
++
++	/* Signalled when a free data slot becomes available. */
++	struct semaphore data_quota_event;
++
++	/* Incremented when there are bulk transfers which cannot be processed
++	 * whilst paused and must be processed on resume */
++	int deferred_bulks;
++
++	struct state_stats_struct {
++		int slot_stalls;
++		int data_stalls;
++		int ctrl_tx_count;
++		int ctrl_rx_count;
++		int error_count;
++	} stats;
++
++	VCHIQ_SERVICE_T * services[VCHIQ_MAX_SERVICES];
++	VCHIQ_SERVICE_QUOTA_T service_quotas[VCHIQ_MAX_SERVICES];
++	VCHIQ_SLOT_INFO_T slot_info[VCHIQ_MAX_SLOTS];
++
++	VCHIQ_PLATFORM_STATE_T platform_state;
++};
++
++struct bulk_waiter {
++	VCHIQ_BULK_T *bulk;
++	struct semaphore event;
++	int actual;
++};
++
++extern spinlock_t bulk_waiter_spinlock;
++
++extern int vchiq_core_log_level;
++extern int vchiq_core_msg_log_level;
++extern int vchiq_sync_log_level;
++
++extern VCHIQ_STATE_T *vchiq_states[VCHIQ_MAX_STATES];
++
++extern const char *
++get_conn_state_name(VCHIQ_CONNSTATE_T conn_state);
++
++extern VCHIQ_SLOT_ZERO_T *
++vchiq_init_slots(void *mem_base, int mem_size);
++
++extern VCHIQ_STATUS_T
++vchiq_init_state(VCHIQ_STATE_T *state, VCHIQ_SLOT_ZERO_T *slot_zero,
++	int is_master);
++
++extern VCHIQ_STATUS_T
++vchiq_connect_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance);
++
++extern VCHIQ_SERVICE_T *
++vchiq_add_service_internal(VCHIQ_STATE_T *state,
++	const VCHIQ_SERVICE_PARAMS_T *params, int srvstate,
++	VCHIQ_INSTANCE_T instance);
++
++extern VCHIQ_STATUS_T
++vchiq_open_service_internal(VCHIQ_SERVICE_T *service, int client_id);
++
++extern VCHIQ_STATUS_T
++vchiq_close_service_internal(VCHIQ_SERVICE_T *service, int close_recvd);
++
++extern void
++vchiq_terminate_service_internal(VCHIQ_SERVICE_T *service);
++
++extern void
++vchiq_free_service_internal(VCHIQ_SERVICE_T *service);
++
++extern VCHIQ_STATUS_T
++vchiq_shutdown_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance);
++
++extern VCHIQ_STATUS_T
++vchiq_pause_internal(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_resume_internal(VCHIQ_STATE_T *state);
++
++extern void
++remote_event_pollall(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
++	VCHI_MEM_HANDLE_T memhandle, void *offset, int size, void *userdata,
++	VCHIQ_BULK_MODE_T mode, VCHIQ_BULK_DIR_T dir);
++
++extern void
++vchiq_dump_state(void *dump_context, VCHIQ_STATE_T *state);
++
++extern void
++vchiq_dump_service_state(void *dump_context, VCHIQ_SERVICE_T *service);
++
++extern void
++vchiq_loud_error_header(void);
++
++extern void
++vchiq_loud_error_footer(void);
++
++extern void
++request_poll(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service, int poll_type);
++
++static inline VCHIQ_SERVICE_T *
++handle_to_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_STATE_T *state = vchiq_states[(handle / VCHIQ_MAX_SERVICES) &
++		(VCHIQ_MAX_STATES - 1)];
++	if (!state)
++		return NULL;
++
++	return state->services[handle & (VCHIQ_MAX_SERVICES - 1)];
++}
++
++extern VCHIQ_SERVICE_T *
++find_service_by_handle(VCHIQ_SERVICE_HANDLE_T handle);
++
++extern VCHIQ_SERVICE_T *
++find_service_by_port(VCHIQ_STATE_T *state, int localport);
++
++extern VCHIQ_SERVICE_T *
++find_service_for_instance(VCHIQ_INSTANCE_T instance,
++	VCHIQ_SERVICE_HANDLE_T handle);
++
++extern VCHIQ_SERVICE_T *
++next_service_by_instance(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance,
++	int *pidx);
++
++extern void
++lock_service(VCHIQ_SERVICE_T *service);
++
++extern void
++unlock_service(VCHIQ_SERVICE_T *service);
++
++/* The following functions are called from vchiq_core, and external
++** implementations must be provided. */
++
++extern VCHIQ_STATUS_T
++vchiq_prepare_bulk_data(VCHIQ_BULK_T *bulk,
++	VCHI_MEM_HANDLE_T memhandle, void *offset, int size, int dir);
++
++extern void
++vchiq_transfer_bulk(VCHIQ_BULK_T *bulk);
++
++extern void
++vchiq_complete_bulk(VCHIQ_BULK_T *bulk);
++
++extern VCHIQ_STATUS_T
++vchiq_copy_from_user(void *dst, const void *src, int size);
++
++extern void
++remote_event_signal(REMOTE_EVENT_T *event);
++
++void
++vchiq_platform_check_suspend(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_platform_paused(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_platform_resume(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_platform_resumed(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_dump(void *dump_context, const char *str, int len);
++
++extern void
++vchiq_dump_platform_state(void *dump_context);
++
++extern void
++vchiq_dump_platform_instances(void *dump_context);
++
++extern void
++vchiq_dump_platform_service_state(void *dump_context,
++	VCHIQ_SERVICE_T *service);
++
++extern VCHIQ_STATUS_T
++vchiq_use_service_internal(VCHIQ_SERVICE_T *service);
++
++extern VCHIQ_STATUS_T
++vchiq_release_service_internal(VCHIQ_SERVICE_T *service);
++
++extern void
++vchiq_on_remote_use(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_on_remote_release(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_platform_init_state(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_check_service(VCHIQ_SERVICE_T *service);
++
++extern void
++vchiq_on_remote_use_active(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_send_remote_use(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_send_remote_release(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_send_remote_use_active(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_platform_conn_state_changed(VCHIQ_STATE_T *state,
++	VCHIQ_CONNSTATE_T oldstate, VCHIQ_CONNSTATE_T newstate);
++
++extern void
++vchiq_platform_handle_timeout(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_set_conn_state(VCHIQ_STATE_T *state, VCHIQ_CONNSTATE_T newstate);
++
++
++extern void
++vchiq_log_dump_mem(const char *label, uint32_t addr, const void *voidMem,
++	size_t numBytes);
++
++#endif
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,89 @@
++#!/usr/bin/perl -w
++
++use strict;
++
++#
++# Generate a version from available information
++#
++
++my $prefix = shift @ARGV;
++my $root = shift @ARGV;
++
++
++if ( not defined $root ) {
++	die "usage: $0 prefix root-dir\n";
++}
++
++if ( ! -d $root ) {
++	die "root directory $root not found\n";
++}
++
++my $version = "unknown";
++my $tainted = "";
++
++if ( -d "$root/.git" ) {
++	# attempt to work out git version. only do so
++	# on a linux build host, as cygwin builds are
++	# already slow enough
++
++	if ( -f "/usr/bin/git" || -f "/usr/local/bin/git" ) {
++		if (not open(F, "git --git-dir $root/.git rev-parse --verify HEAD|")) {
++			$version = "no git version";
++		}
++		else {
++			$version = <F>;
++			$version =~ s/[ \r\n]*$//;     # chomp may not be enough (cygwin).
++			$version =~ s/^[ \r\n]*//;     # chomp may not be enough (cygwin).
++		}
++
++		if (open(G, "git --git-dir $root/.git status --porcelain|")) {
++			$tainted = <G>;
++			$tainted =~ s/[ \r\n]*$//;     # chomp may not be enough (cygwin).
++			$tainted =~ s/^[ \r\n]*//;     # chomp may not be enough (cygwin).
++			if (length $tainted) {
++   			$version = join ' ', $version, "(tainted)";
++   		}
++   		else {
++   			$version = join ' ', $version, "(clean)";
++         }   		
++		}
++	}
++}
++
++my $hostname = `hostname`;
++$hostname =~ s/[ \r\n]*$//;     # chomp may not be enough (cygwin).
++$hostname =~ s/^[ \r\n]*//;     # chomp may not be enough (cygwin).
++
++
++print STDERR "Version $version\n";
++print <<EOF;
++#include "${prefix}_build_info.h"
++#include <linux/broadcom/vc_debug_sym.h>
++
++VC_DEBUG_DECLARE_STRING_VAR( ${prefix}_build_hostname, "$hostname" );
++VC_DEBUG_DECLARE_STRING_VAR( ${prefix}_build_version, "$version" );
++VC_DEBUG_DECLARE_STRING_VAR( ${prefix}_build_time,    __TIME__ );
++VC_DEBUG_DECLARE_STRING_VAR( ${prefix}_build_date,    __DATE__ );
++
++const char *vchiq_get_build_hostname( void )
++{
++   return vchiq_build_hostname;
++}
++
++const char *vchiq_get_build_version( void )
++{
++   return vchiq_build_version;
++}
++
++const char *vchiq_get_build_date( void )
++{
++   return vchiq_build_date;
++}
++
++const char *vchiq_get_build_time( void )
++{
++   return vchiq_build_time;
++}
++EOF
++
++
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,41 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_VCHIQ_H
++#define VCHIQ_VCHIQ_H
++
++#include "vchiq_if.h"
++#include "vchiq_util.h"
++
++#endif
++
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,188 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_IF_H
++#define VCHIQ_IF_H
++
++#include "interface/vchi/vchi_mh.h"
++
++#define VCHIQ_SERVICE_HANDLE_INVALID 0
++
++#define VCHIQ_SLOT_SIZE     4096
++#define VCHIQ_MAX_MSG_SIZE  (VCHIQ_SLOT_SIZE - sizeof(VCHIQ_HEADER_T))
++#define VCHIQ_CHANNEL_SIZE  VCHIQ_MAX_MSG_SIZE /* For backwards compatibility */
++
++#define VCHIQ_MAKE_FOURCC(x0, x1, x2, x3) \
++			(((x0) << 24) | ((x1) << 16) | ((x2) << 8) | (x3))
++#define VCHIQ_GET_SERVICE_USERDATA(service) vchiq_get_service_userdata(service)
++#define VCHIQ_GET_SERVICE_FOURCC(service)   vchiq_get_service_fourcc(service)
++
++typedef enum {
++	VCHIQ_SERVICE_OPENED,         /* service, -, -             */
++	VCHIQ_SERVICE_CLOSED,         /* service, -, -             */
++	VCHIQ_MESSAGE_AVAILABLE,      /* service, header, -        */
++	VCHIQ_BULK_TRANSMIT_DONE,     /* service, -, bulk_userdata */
++	VCHIQ_BULK_RECEIVE_DONE,      /* service, -, bulk_userdata */
++	VCHIQ_BULK_TRANSMIT_ABORTED,  /* service, -, bulk_userdata */
++	VCHIQ_BULK_RECEIVE_ABORTED    /* service, -, bulk_userdata */
++} VCHIQ_REASON_T;
++
++typedef enum {
++	VCHIQ_ERROR   = -1,
++	VCHIQ_SUCCESS = 0,
++	VCHIQ_RETRY   = 1
++} VCHIQ_STATUS_T;
++
++typedef enum {
++	VCHIQ_BULK_MODE_CALLBACK,
++	VCHIQ_BULK_MODE_BLOCKING,
++	VCHIQ_BULK_MODE_NOCALLBACK,
++	VCHIQ_BULK_MODE_WAITING		/* Reserved for internal use */
++} VCHIQ_BULK_MODE_T;
++
++typedef enum {
++	VCHIQ_SERVICE_OPTION_AUTOCLOSE,
++	VCHIQ_SERVICE_OPTION_SLOT_QUOTA,
++	VCHIQ_SERVICE_OPTION_MESSAGE_QUOTA,
++	VCHIQ_SERVICE_OPTION_SYNCHRONOUS
++} VCHIQ_SERVICE_OPTION_T;
++
++typedef struct vchiq_header_struct {
++	/* The message identifier - opaque to applications. */
++	int msgid;
++
++	/* Size of message data. */
++	unsigned int size;
++
++	char data[0];           /* message */
++} VCHIQ_HEADER_T;
++
++typedef struct {
++	const void *data;
++	unsigned int size;
++} VCHIQ_ELEMENT_T;
++
++typedef unsigned int VCHIQ_SERVICE_HANDLE_T;
++
++typedef VCHIQ_STATUS_T (*VCHIQ_CALLBACK_T)(VCHIQ_REASON_T, VCHIQ_HEADER_T *,
++	VCHIQ_SERVICE_HANDLE_T, void *);
++
++typedef struct vchiq_service_base_struct {
++	int fourcc;
++	VCHIQ_CALLBACK_T callback;
++	void *userdata;
++} VCHIQ_SERVICE_BASE_T;
++
++typedef struct vchiq_service_params_struct {
++	int fourcc;
++	VCHIQ_CALLBACK_T callback;
++	void *userdata;
++	short version;       /* Increment for non-trivial changes */
++	short version_min;   /* Update for incompatible changes */
++} VCHIQ_SERVICE_PARAMS_T;
++
++typedef struct vchiq_config_struct {
++	unsigned int max_msg_size;
++	unsigned int bulk_threshold; /* The message size above which it
++					is better to use a bulk transfer
++					(<= max_msg_size) */
++	unsigned int max_outstanding_bulks;
++	unsigned int max_services;
++	short version;      /* The version of VCHIQ */
++	short version_min;  /* The minimum compatible version of VCHIQ */
++} VCHIQ_CONFIG_T;
++
++typedef struct vchiq_instance_struct *VCHIQ_INSTANCE_T;
++typedef void (*VCHIQ_REMOTE_USE_CALLBACK_T)(void *cb_arg);
++
++extern VCHIQ_STATUS_T vchiq_initialise(VCHIQ_INSTANCE_T *pinstance);
++extern VCHIQ_STATUS_T vchiq_shutdown(VCHIQ_INSTANCE_T instance);
++extern VCHIQ_STATUS_T vchiq_connect(VCHIQ_INSTANCE_T instance);
++extern VCHIQ_STATUS_T vchiq_add_service(VCHIQ_INSTANCE_T instance,
++	const VCHIQ_SERVICE_PARAMS_T *params,
++	VCHIQ_SERVICE_HANDLE_T *pservice);
++extern VCHIQ_STATUS_T vchiq_open_service(VCHIQ_INSTANCE_T instance,
++	const VCHIQ_SERVICE_PARAMS_T *params,
++	VCHIQ_SERVICE_HANDLE_T *pservice);
++extern VCHIQ_STATUS_T vchiq_close_service(VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_remove_service(VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_use_service(VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_use_service_no_resume(
++	VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_release_service(VCHIQ_SERVICE_HANDLE_T service);
++
++extern VCHIQ_STATUS_T vchiq_queue_message(VCHIQ_SERVICE_HANDLE_T service,
++	const VCHIQ_ELEMENT_T *elements, unsigned int count);
++extern void           vchiq_release_message(VCHIQ_SERVICE_HANDLE_T service,
++	VCHIQ_HEADER_T *header);
++extern VCHIQ_STATUS_T vchiq_queue_bulk_transmit(VCHIQ_SERVICE_HANDLE_T service,
++	const void *data, unsigned int size, void *userdata);
++extern VCHIQ_STATUS_T vchiq_queue_bulk_receive(VCHIQ_SERVICE_HANDLE_T service,
++	void *data, unsigned int size, void *userdata);
++extern VCHIQ_STATUS_T vchiq_queue_bulk_transmit_handle(
++	VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle,
++	const void *offset, unsigned int size, void *userdata);
++extern VCHIQ_STATUS_T vchiq_queue_bulk_receive_handle(
++	VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle,
++	void *offset, unsigned int size, void *userdata);
++extern VCHIQ_STATUS_T vchiq_bulk_transmit(VCHIQ_SERVICE_HANDLE_T service,
++	const void *data, unsigned int size, void *userdata,
++	VCHIQ_BULK_MODE_T mode);
++extern VCHIQ_STATUS_T vchiq_bulk_receive(VCHIQ_SERVICE_HANDLE_T service,
++	void *data, unsigned int size, void *userdata,
++	VCHIQ_BULK_MODE_T mode);
++extern VCHIQ_STATUS_T vchiq_bulk_transmit_handle(VCHIQ_SERVICE_HANDLE_T service,
++	VCHI_MEM_HANDLE_T handle, const void *offset, unsigned int size,
++	void *userdata,	VCHIQ_BULK_MODE_T mode);
++extern VCHIQ_STATUS_T vchiq_bulk_receive_handle(VCHIQ_SERVICE_HANDLE_T service,
++	VCHI_MEM_HANDLE_T handle, void *offset, unsigned int size,
++	void *userdata, VCHIQ_BULK_MODE_T mode);
++extern int   vchiq_get_client_id(VCHIQ_SERVICE_HANDLE_T service);
++extern void *vchiq_get_service_userdata(VCHIQ_SERVICE_HANDLE_T service);
++extern int   vchiq_get_service_fourcc(VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_get_config(VCHIQ_INSTANCE_T instance,
++	int config_size, VCHIQ_CONFIG_T *pconfig);
++extern VCHIQ_STATUS_T vchiq_set_service_option(VCHIQ_SERVICE_HANDLE_T service,
++	VCHIQ_SERVICE_OPTION_T option, int value);
++
++extern VCHIQ_STATUS_T vchiq_remote_use(VCHIQ_INSTANCE_T instance,
++	VCHIQ_REMOTE_USE_CALLBACK_T callback, void *cb_arg);
++extern VCHIQ_STATUS_T vchiq_remote_release(VCHIQ_INSTANCE_T instance);
++
++extern VCHIQ_STATUS_T vchiq_dump_phys_mem(VCHIQ_SERVICE_HANDLE_T service,
++	void *ptr, size_t num_bytes);
++
++extern VCHIQ_STATUS_T vchiq_get_peer_version(VCHIQ_SERVICE_HANDLE_T handle,
++      short *peer_version);
++
++#endif /* VCHIQ_IF_H */
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,129 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_IOCTLS_H
++#define VCHIQ_IOCTLS_H
++
++#include <linux/ioctl.h>
++#include "vchiq_if.h"
++
++#define VCHIQ_IOC_MAGIC 0xc4
++#define VCHIQ_INVALID_HANDLE (~0)
++
++typedef struct {
++	VCHIQ_SERVICE_PARAMS_T params;
++	int is_open;
++	int is_vchi;
++	unsigned int handle;       /* OUT */
++} VCHIQ_CREATE_SERVICE_T;
++
++typedef struct {
++	unsigned int handle;
++	unsigned int count;
++	const VCHIQ_ELEMENT_T *elements;
++} VCHIQ_QUEUE_MESSAGE_T;
++
++typedef struct {
++	unsigned int handle;
++	void *data;
++	unsigned int size;
++	void *userdata;
++	VCHIQ_BULK_MODE_T mode;
++} VCHIQ_QUEUE_BULK_TRANSFER_T;
++
++typedef struct {
++	VCHIQ_REASON_T reason;
++	VCHIQ_HEADER_T *header;
++	void *service_userdata;
++	void *bulk_userdata;
++} VCHIQ_COMPLETION_DATA_T;
++
++typedef struct {
++	unsigned int count;
++	VCHIQ_COMPLETION_DATA_T *buf;
++	unsigned int msgbufsize;
++	unsigned int msgbufcount; /* IN/OUT */
++	void **msgbufs;
++} VCHIQ_AWAIT_COMPLETION_T;
++
++typedef struct {
++	unsigned int handle;
++	int blocking;
++	unsigned int bufsize;
++	void *buf;
++} VCHIQ_DEQUEUE_MESSAGE_T;
++
++typedef struct {
++	unsigned int config_size;
++	VCHIQ_CONFIG_T *pconfig;
++} VCHIQ_GET_CONFIG_T;
++
++typedef struct {
++	unsigned int handle;
++	VCHIQ_SERVICE_OPTION_T option;
++	int value;
++} VCHIQ_SET_SERVICE_OPTION_T;
++
++typedef struct {
++	void     *virt_addr;
++	size_t    num_bytes;
++} VCHIQ_DUMP_MEM_T;
++
++#define VCHIQ_IOC_CONNECT              _IO(VCHIQ_IOC_MAGIC,   0)
++#define VCHIQ_IOC_SHUTDOWN             _IO(VCHIQ_IOC_MAGIC,   1)
++#define VCHIQ_IOC_CREATE_SERVICE \
++	_IOWR(VCHIQ_IOC_MAGIC, 2, VCHIQ_CREATE_SERVICE_T)
++#define VCHIQ_IOC_REMOVE_SERVICE       _IO(VCHIQ_IOC_MAGIC,   3)
++#define VCHIQ_IOC_QUEUE_MESSAGE \
++	_IOW(VCHIQ_IOC_MAGIC,  4, VCHIQ_QUEUE_MESSAGE_T)
++#define VCHIQ_IOC_QUEUE_BULK_TRANSMIT \
++	_IOWR(VCHIQ_IOC_MAGIC, 5, VCHIQ_QUEUE_BULK_TRANSFER_T)
++#define VCHIQ_IOC_QUEUE_BULK_RECEIVE \
++	_IOWR(VCHIQ_IOC_MAGIC, 6, VCHIQ_QUEUE_BULK_TRANSFER_T)
++#define VCHIQ_IOC_AWAIT_COMPLETION \
++	_IOWR(VCHIQ_IOC_MAGIC, 7, VCHIQ_AWAIT_COMPLETION_T)
++#define VCHIQ_IOC_DEQUEUE_MESSAGE \
++	_IOWR(VCHIQ_IOC_MAGIC, 8, VCHIQ_DEQUEUE_MESSAGE_T)
++#define VCHIQ_IOC_GET_CLIENT_ID        _IO(VCHIQ_IOC_MAGIC,   9)
++#define VCHIQ_IOC_GET_CONFIG \
++	_IOWR(VCHIQ_IOC_MAGIC, 10, VCHIQ_GET_CONFIG_T)
++#define VCHIQ_IOC_CLOSE_SERVICE        _IO(VCHIQ_IOC_MAGIC,   11)
++#define VCHIQ_IOC_USE_SERVICE          _IO(VCHIQ_IOC_MAGIC,   12)
++#define VCHIQ_IOC_RELEASE_SERVICE      _IO(VCHIQ_IOC_MAGIC,   13)
++#define VCHIQ_IOC_SET_SERVICE_OPTION \
++	_IOW(VCHIQ_IOC_MAGIC,  14, VCHIQ_SET_SERVICE_OPTION_T)
++#define VCHIQ_IOC_DUMP_PHYS_MEM \
++	_IOW(VCHIQ_IOC_MAGIC,  15, VCHIQ_DUMP_MEM_T)
++#define VCHIQ_IOC_MAX                  15
++
++#endif
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,454 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/* ---- Include Files ---------------------------------------------------- */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++
++#include "vchiq_core.h"
++#include "vchiq_arm.h"
++
++/* ---- Public Variables ------------------------------------------------- */
++
++/* ---- Private Constants and Types -------------------------------------- */
++
++struct bulk_waiter_node {
++	struct bulk_waiter bulk_waiter;
++	int pid;
++	struct list_head list;
++};
++
++struct vchiq_instance_struct {
++	VCHIQ_STATE_T *state;
++
++	int connected;
++
++	struct list_head bulk_waiter_list;
++	struct mutex bulk_waiter_list_mutex;
++};
++
++static VCHIQ_STATUS_T
++vchiq_blocking_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle, void *data,
++	unsigned int size, VCHIQ_BULK_DIR_T dir);
++
++/****************************************************************************
++*
++*   vchiq_initialise
++*
++***************************************************************************/
++#define VCHIQ_INIT_RETRIES 10
++VCHIQ_STATUS_T vchiq_initialise(VCHIQ_INSTANCE_T *instanceOut)
++{
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++	VCHIQ_STATE_T *state;
++	VCHIQ_INSTANCE_T instance = NULL;
++        int i;
++
++	vchiq_log_trace(vchiq_core_log_level, "%s called", __func__);
++
++        /* VideoCore may not be ready due to boot up timing.
++           It may never be ready if kernel and firmware are mismatched, so don't block forever. */
++        for (i=0; i<VCHIQ_INIT_RETRIES; i++) {
++		state = vchiq_get_state();
++		if (state)
++			break;
++		udelay(500);
++	}
++	if (i==VCHIQ_INIT_RETRIES) {
++		vchiq_log_error(vchiq_core_log_level,
++			"%s: videocore not initialized\n", __func__);
++		goto failed;
++	} else if (i>0) {
++		vchiq_log_warning(vchiq_core_log_level,
++			"%s: videocore initialized after %d retries\n", __func__, i);
++	}
++
++	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
++	if (!instance) {
++		vchiq_log_error(vchiq_core_log_level,
++			"%s: error allocating vchiq instance\n", __func__);
++		goto failed;
++	}
++
++	instance->connected = 0;
++	instance->state = state;
++	mutex_init(&instance->bulk_waiter_list_mutex);
++	INIT_LIST_HEAD(&instance->bulk_waiter_list);
++
++	*instanceOut = instance;
++
++	status = VCHIQ_SUCCESS;
++
++failed:
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_initialise);
++
++/****************************************************************************
++*
++*   vchiq_shutdown
++*
++***************************************************************************/
++
++VCHIQ_STATUS_T vchiq_shutdown(VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_STATUS_T status;
++	VCHIQ_STATE_T *state = instance->state;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p) called", __func__, instance);
++
++	if (mutex_lock_interruptible(&state->mutex) != 0)
++		return VCHIQ_RETRY;
++
++	/* Remove all services */
++	status = vchiq_shutdown_internal(state, instance);
++
++	mutex_unlock(&state->mutex);
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	if (status == VCHIQ_SUCCESS) {
++		struct list_head *pos, *next;
++		list_for_each_safe(pos, next,
++				&instance->bulk_waiter_list) {
++			struct bulk_waiter_node *waiter;
++			waiter = list_entry(pos,
++					struct bulk_waiter_node,
++					list);
++			list_del(pos);
++			vchiq_log_info(vchiq_arm_log_level,
++					"bulk_waiter - cleaned up %x "
++					"for pid %d",
++					(unsigned int)waiter, waiter->pid);
++			kfree(waiter);
++		}
++		kfree(instance);
++	}
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_shutdown);
++
++/****************************************************************************
++*
++*   vchiq_is_connected
++*
++***************************************************************************/
++
++int vchiq_is_connected(VCHIQ_INSTANCE_T instance)
++{
++	return instance->connected;
++}
++
++/****************************************************************************
++*
++*   vchiq_connect
++*
++***************************************************************************/
++
++VCHIQ_STATUS_T vchiq_connect(VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_STATUS_T status;
++	VCHIQ_STATE_T *state = instance->state;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p) called", __func__, instance);
++
++	if (mutex_lock_interruptible(&state->mutex) != 0) {
++		vchiq_log_trace(vchiq_core_log_level,
++			"%s: call to mutex_lock failed", __func__);
++		status = VCHIQ_RETRY;
++		goto failed;
++	}
++	status = vchiq_connect_internal(state, instance);
++
++	if (status == VCHIQ_SUCCESS)
++		instance->connected = 1;
++
++	mutex_unlock(&state->mutex);
++
++failed:
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_connect);
++
++/****************************************************************************
++*
++*   vchiq_add_service
++*
++***************************************************************************/
++
++VCHIQ_STATUS_T vchiq_add_service(
++	VCHIQ_INSTANCE_T              instance,
++	const VCHIQ_SERVICE_PARAMS_T *params,
++	VCHIQ_SERVICE_HANDLE_T       *phandle)
++{
++	VCHIQ_STATUS_T status;
++	VCHIQ_STATE_T *state = instance->state;
++	VCHIQ_SERVICE_T *service = NULL;
++	int srvstate;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p) called", __func__, instance);
++
++	*phandle = VCHIQ_SERVICE_HANDLE_INVALID;
++
++	srvstate = vchiq_is_connected(instance)
++		? VCHIQ_SRVSTATE_LISTENING
++		: VCHIQ_SRVSTATE_HIDDEN;
++
++	service = vchiq_add_service_internal(
++		state,
++		params,
++		srvstate,
++		instance);
++
++	if (service) {
++		*phandle = service->handle;
++		status = VCHIQ_SUCCESS;
++	} else
++		status = VCHIQ_ERROR;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_add_service);
++
++/****************************************************************************
++*
++*   vchiq_open_service
++*
++***************************************************************************/
++
++VCHIQ_STATUS_T vchiq_open_service(
++	VCHIQ_INSTANCE_T              instance,
++	const VCHIQ_SERVICE_PARAMS_T *params,
++	VCHIQ_SERVICE_HANDLE_T       *phandle)
++{
++	VCHIQ_STATUS_T   status = VCHIQ_ERROR;
++	VCHIQ_STATE_T   *state = instance->state;
++	VCHIQ_SERVICE_T *service = NULL;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p) called", __func__, instance);
++
++	*phandle = VCHIQ_SERVICE_HANDLE_INVALID;
++
++	if (!vchiq_is_connected(instance))
++		goto failed;
++
++	service = vchiq_add_service_internal(state,
++		params,
++		VCHIQ_SRVSTATE_OPENING,
++		instance);
++
++	if (service) {
++		status = vchiq_open_service_internal(service, current->pid);
++		if (status == VCHIQ_SUCCESS)
++			*phandle = service->handle;
++		else
++			vchiq_remove_service(service->handle);
++	}
++
++failed:
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_open_service);
++
++VCHIQ_STATUS_T
++vchiq_queue_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle,
++	const void *data, unsigned int size, void *userdata)
++{
++	return vchiq_bulk_transfer(handle,
++		VCHI_MEM_HANDLE_INVALID, (void *)data, size, userdata,
++		VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_TRANSMIT);
++}
++EXPORT_SYMBOL(vchiq_queue_bulk_transmit);
++
++VCHIQ_STATUS_T
++vchiq_queue_bulk_receive(VCHIQ_SERVICE_HANDLE_T handle, void *data,
++	unsigned int size, void *userdata)
++{
++	return vchiq_bulk_transfer(handle,
++		VCHI_MEM_HANDLE_INVALID, data, size, userdata,
++		VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_RECEIVE);
++}
++EXPORT_SYMBOL(vchiq_queue_bulk_receive);
++
++VCHIQ_STATUS_T
++vchiq_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle, const void *data,
++	unsigned int size, void *userdata, VCHIQ_BULK_MODE_T mode)
++{
++	VCHIQ_STATUS_T status;
++
++	switch (mode) {
++	case VCHIQ_BULK_MODE_NOCALLBACK:
++	case VCHIQ_BULK_MODE_CALLBACK:
++		status = vchiq_bulk_transfer(handle,
++			VCHI_MEM_HANDLE_INVALID, (void *)data, size, userdata,
++			mode, VCHIQ_BULK_TRANSMIT);
++		break;
++	case VCHIQ_BULK_MODE_BLOCKING:
++		status = vchiq_blocking_bulk_transfer(handle,
++			(void *)data, size, VCHIQ_BULK_TRANSMIT);
++		break;
++	default:
++		return VCHIQ_ERROR;
++	}
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_bulk_transmit);
++
++VCHIQ_STATUS_T
++vchiq_bulk_receive(VCHIQ_SERVICE_HANDLE_T handle, void *data,
++	unsigned int size, void *userdata, VCHIQ_BULK_MODE_T mode)
++{
++	VCHIQ_STATUS_T status;
++
++	switch (mode) {
++	case VCHIQ_BULK_MODE_NOCALLBACK:
++	case VCHIQ_BULK_MODE_CALLBACK:
++		status = vchiq_bulk_transfer(handle,
++			VCHI_MEM_HANDLE_INVALID, data, size, userdata,
++			mode, VCHIQ_BULK_RECEIVE);
++		break;
++	case VCHIQ_BULK_MODE_BLOCKING:
++		status = vchiq_blocking_bulk_transfer(handle,
++			(void *)data, size, VCHIQ_BULK_RECEIVE);
++		break;
++	default:
++		return VCHIQ_ERROR;
++	}
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_bulk_receive);
++
++static VCHIQ_STATUS_T
++vchiq_blocking_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle, void *data,
++	unsigned int size, VCHIQ_BULK_DIR_T dir)
++{
++	VCHIQ_INSTANCE_T instance;
++	VCHIQ_SERVICE_T *service;
++	VCHIQ_STATUS_T status;
++	struct bulk_waiter_node *waiter = NULL;
++	struct list_head *pos;
++
++	service = find_service_by_handle(handle);
++	if (!service)
++		return VCHIQ_ERROR;
++
++	instance = service->instance;
++
++	unlock_service(service);
++
++	mutex_lock(&instance->bulk_waiter_list_mutex);
++	list_for_each(pos, &instance->bulk_waiter_list) {
++		if (list_entry(pos, struct bulk_waiter_node,
++				list)->pid == current->pid) {
++			waiter = list_entry(pos,
++				struct bulk_waiter_node,
++				list);
++			list_del(pos);
++			break;
++		}
++	}
++	mutex_unlock(&instance->bulk_waiter_list_mutex);
++
++	if (waiter) {
++		VCHIQ_BULK_T *bulk = waiter->bulk_waiter.bulk;
++		if (bulk) {
++			/* This thread has an outstanding bulk transfer. */
++			if ((bulk->data != data) ||
++				(bulk->size != size)) {
++				/* This is not a retry of the previous one.
++				** Cancel the signal when the transfer
++				** completes. */
++				spin_lock(&bulk_waiter_spinlock);
++				bulk->userdata = NULL;
++				spin_unlock(&bulk_waiter_spinlock);
++			}
++		}
++	}
++
++	if (!waiter) {
++		waiter = kzalloc(sizeof(struct bulk_waiter_node), GFP_KERNEL);
++		if (!waiter) {
++			vchiq_log_error(vchiq_core_log_level,
++				"%s - out of memory", __func__);
++			return VCHIQ_ERROR;
++		}
++	}
++
++	status = vchiq_bulk_transfer(handle, VCHI_MEM_HANDLE_INVALID,
++		data, size, &waiter->bulk_waiter, VCHIQ_BULK_MODE_BLOCKING,
++		dir);
++	if ((status != VCHIQ_RETRY) || fatal_signal_pending(current) ||
++		!waiter->bulk_waiter.bulk) {
++		VCHIQ_BULK_T *bulk = waiter->bulk_waiter.bulk;
++		if (bulk) {
++			/* Cancel the signal when the transfer
++			 ** completes. */
++			spin_lock(&bulk_waiter_spinlock);
++			bulk->userdata = NULL;
++			spin_unlock(&bulk_waiter_spinlock);
++		}
++		kfree(waiter);
++	} else {
++		waiter->pid = current->pid;
++		mutex_lock(&instance->bulk_waiter_list_mutex);
++		list_add(&waiter->list, &instance->bulk_waiter_list);
++		mutex_unlock(&instance->bulk_waiter_list_mutex);
++		vchiq_log_info(vchiq_arm_log_level,
++				"saved bulk_waiter %x for pid %d",
++				(unsigned int)waiter, current->pid);
++	}
++
++	return status;
++}
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,71 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_MEMDRV_H
++#define VCHIQ_MEMDRV_H
++
++/* ---- Include Files ----------------------------------------------------- */
++
++#include <linux/kernel.h>
++#include "vchiq_if.h"
++
++/* ---- Constants and Types ---------------------------------------------- */
++
++typedef struct {
++	 void                   *armSharedMemVirt;
++	 dma_addr_t              armSharedMemPhys;
++	 size_t                  armSharedMemSize;
++
++	 void                   *vcSharedMemVirt;
++	 dma_addr_t              vcSharedMemPhys;
++	 size_t                  vcSharedMemSize;
++} VCHIQ_SHARED_MEM_INFO_T;
++
++/* ---- Variable Externs ------------------------------------------------- */
++
++/* ---- Function Prototypes ---------------------------------------------- */
++
++void vchiq_get_shared_mem_info(VCHIQ_SHARED_MEM_INFO_T *info);
++
++VCHIQ_STATUS_T vchiq_memdrv_initialise(void);
++
++VCHIQ_STATUS_T vchiq_userdrv_create_instance(
++	const VCHIQ_PLATFORM_DATA_T * platform_data);
++
++VCHIQ_STATUS_T vchiq_userdrv_suspend(
++	const VCHIQ_PLATFORM_DATA_T * platform_data);
++
++VCHIQ_STATUS_T vchiq_userdrv_resume(
++	const VCHIQ_PLATFORM_DATA_T * platform_data);
++
++#endif
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,58 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_PAGELIST_H
++#define VCHIQ_PAGELIST_H
++
++#ifndef PAGE_SIZE
++#define PAGE_SIZE 4096
++#endif
++#define CACHE_LINE_SIZE 32
++#define PAGELIST_WRITE 0
++#define PAGELIST_READ 1
++#define PAGELIST_READ_WITH_FRAGMENTS 2
++
++typedef struct pagelist_struct {
++	unsigned long length;
++	unsigned short type;
++	unsigned short offset;
++	unsigned long addrs[1];	/* N.B. 12 LSBs hold the number of following
++				   pages at consecutive addresses. */
++} PAGELIST_T;
++
++typedef struct fragments_struct {
++	char headbuf[CACHE_LINE_SIZE];
++	char tailbuf[CACHE_LINE_SIZE];
++} FRAGMENTS_T;
++
++#endif /* VCHIQ_PAGELIST_H */
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,243 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++#include <linux/proc_fs.h>
++#include "vchiq_core.h"
++#include "vchiq_arm.h"
++
++struct vchiq_proc_info {
++	/* Global 'vc' proc entry used by all instances */
++	struct proc_dir_entry *vc_cfg_dir;
++
++	/* one entry per client process */
++	struct proc_dir_entry *clients;
++
++	/* log categories */
++	struct proc_dir_entry *log_categories;
++};
++
++static struct vchiq_proc_info proc_info;
++
++struct proc_dir_entry *vchiq_proc_top(void)
++{
++	BUG_ON(proc_info.vc_cfg_dir == NULL);
++	return proc_info.vc_cfg_dir;
++}
++
++/****************************************************************************
++*
++*   log category entries
++*
++***************************************************************************/
++#define PROC_WRITE_BUF_SIZE 256
++
++#define VCHIQ_LOG_ERROR_STR   "error"
++#define VCHIQ_LOG_WARNING_STR "warning"
++#define VCHIQ_LOG_INFO_STR    "info"
++#define VCHIQ_LOG_TRACE_STR   "trace"
++
++static int log_cfg_read(char *buffer,
++	char **start,
++	off_t off,
++	int count,
++	int *eof,
++	void *data)
++{
++	int len = 0;
++	char *log_value = NULL;
++
++	switch (*((int *)data)) {
++	case VCHIQ_LOG_ERROR:
++		log_value = VCHIQ_LOG_ERROR_STR;
++		break;
++	case VCHIQ_LOG_WARNING:
++		log_value = VCHIQ_LOG_WARNING_STR;
++		break;
++	case VCHIQ_LOG_INFO:
++		log_value = VCHIQ_LOG_INFO_STR;
++		break;
++	case VCHIQ_LOG_TRACE:
++		log_value = VCHIQ_LOG_TRACE_STR;
++		break;
++	default:
++		break;
++	}
++
++	len += sprintf(buffer + len,
++		"%s\n",
++		log_value ? log_value : "(null)");
++
++	return len;
++}
++
++
++static int log_cfg_write(struct file *file,
++	const char __user *buffer,
++	unsigned long count,
++	void *data)
++{
++	int *log_module = data;
++	char kbuf[PROC_WRITE_BUF_SIZE + 1];
++
++	(void)file;
++
++	memset(kbuf, 0, PROC_WRITE_BUF_SIZE + 1);
++	if (count >= PROC_WRITE_BUF_SIZE)
++		count = PROC_WRITE_BUF_SIZE;
++
++	if (copy_from_user(kbuf,
++		buffer,
++		count) != 0)
++		return -EFAULT;
++	kbuf[count - 1] = 0;
++
++	if (strncmp("error", kbuf, strlen("error")) == 0)
++		*log_module = VCHIQ_LOG_ERROR;
++	else if (strncmp("warning", kbuf, strlen("warning")) == 0)
++		*log_module = VCHIQ_LOG_WARNING;
++	else if (strncmp("info", kbuf, strlen("info")) == 0)
++		*log_module = VCHIQ_LOG_INFO;
++	else if (strncmp("trace", kbuf, strlen("trace")) == 0)
++		*log_module = VCHIQ_LOG_TRACE;
++	else
++		*log_module = VCHIQ_LOG_DEFAULT;
++
++	return count;
++}
++
++/* Log category proc entries */
++struct vchiq_proc_log_entry {
++	const char *name;
++	int *plevel;
++	struct proc_dir_entry *dir;
++};
++
++static struct vchiq_proc_log_entry vchiq_proc_log_entries[] = {
++	{ "core", &vchiq_core_log_level },
++	{ "msg",  &vchiq_core_msg_log_level },
++	{ "sync", &vchiq_sync_log_level },
++	{ "susp", &vchiq_susp_log_level },
++	{ "arm",  &vchiq_arm_log_level },
++};
++static int n_log_entries =
++	sizeof(vchiq_proc_log_entries)/sizeof(vchiq_proc_log_entries[0]);
++
++/* create an entry under /proc/vc/log for each log category */
++static int vchiq_proc_create_log_entries(struct proc_dir_entry *top)
++{
++	struct proc_dir_entry *dir;
++	size_t i;
++	int ret = 0;
++#if 0
++	dir = proc_mkdir("log", proc_info.vc_cfg_dir);
++	if (!dir)
++		return -ENOMEM;
++	proc_info.log_categories = dir;
++
++	for (i = 0; i < n_log_entries; i++) {
++		dir = create_proc_entry(vchiq_proc_log_entries[i].name,
++					0644,
++					proc_info.log_categories);
++		if (!dir) {
++			ret = -ENOMEM;
++			break;
++		}
++
++		dir->read_proc = &log_cfg_read;
++		dir->write_proc = &log_cfg_write;
++		dir->data = (void *)vchiq_proc_log_entries[i].plevel;
++
++		vchiq_proc_log_entries[i].dir = dir;
++	}
++#endif
++	return ret;
++}
++
++
++int vchiq_proc_init(void)
++{
++	BUG_ON(proc_info.vc_cfg_dir != NULL);
++
++	proc_info.vc_cfg_dir = proc_mkdir("vc", NULL);
++	if (proc_info.vc_cfg_dir == NULL)
++		goto fail;
++
++	proc_info.clients = proc_mkdir("clients",
++				proc_info.vc_cfg_dir);
++	if (!proc_info.clients)
++		goto fail;
++
++	if (vchiq_proc_create_log_entries(proc_info.vc_cfg_dir) != 0)
++		goto fail;
++
++	return 0;
++
++fail:
++	vchiq_proc_deinit();
++	vchiq_log_error(vchiq_arm_log_level,
++		"%s: failed to create proc directory",
++		__func__);
++
++	return -ENOMEM;
++}
++
++/* remove all the proc entries */
++void vchiq_proc_deinit(void)
++{
++	/* log category entries */
++#if 0
++	if (proc_info.log_categories) {
++		size_t i;
++		for (i = 0; i < n_log_entries; i++)
++			if (vchiq_proc_log_entries[i].dir)
++				remove_proc_entry(
++					vchiq_proc_log_entries[i].name,
++					proc_info.log_categories);
++
++		remove_proc_entry(proc_info.log_categories->name,
++				  proc_info.vc_cfg_dir);
++	}
++	if (proc_info.clients)
++		remove_proc_entry(proc_info.clients->name,
++				  proc_info.vc_cfg_dir);
++	if (proc_info.vc_cfg_dir)
++		remove_proc_entry(proc_info.vc_cfg_dir->name, NULL);
++#endif
++}
++
++struct proc_dir_entry *vchiq_clients_top(void)
++{
++	return proc_info.clients;
++}
++
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,815 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++#include <linux/module.h>
++#include <linux/types.h>
++
++#include "interface/vchi/vchi.h"
++#include "vchiq.h"
++#include "vchiq_core.h"
++
++#include "vchiq_util.h"
++
++#include <stddef.h>
++
++#define vchiq_status_to_vchi(status) ((int32_t)status)
++
++typedef struct {
++	VCHIQ_SERVICE_HANDLE_T handle;
++
++	VCHIU_QUEUE_T queue;
++
++	VCHI_CALLBACK_T callback;
++	void *callback_param;
++} SHIM_SERVICE_T;
++
++/* ----------------------------------------------------------------------
++ * return pointer to the mphi message driver function table
++ * -------------------------------------------------------------------- */
++const VCHI_MESSAGE_DRIVER_T *
++vchi_mphi_message_driver_func_table(void)
++{
++	return NULL;
++}
++
++/* ----------------------------------------------------------------------
++ * return a pointer to the 'single' connection driver fops
++ * -------------------------------------------------------------------- */
++const VCHI_CONNECTION_API_T *
++single_get_func_table(void)
++{
++	return NULL;
++}
++
++VCHI_CONNECTION_T *vchi_create_connection(
++	const VCHI_CONNECTION_API_T *function_table,
++	const VCHI_MESSAGE_DRIVER_T *low_level)
++{
++	(void)function_table;
++	(void)low_level;
++	return NULL;
++}
++
++/***********************************************************
++ * Name: vchi_msg_peek
++ *
++ * Arguments:  const VCHI_SERVICE_HANDLE_T handle,
++ *             void **data,
++ *             uint32_t *msg_size,
++
++
++ *             VCHI_FLAGS_T flags
++ *
++ * Description: Routine to return a pointer to the current message (to allow in
++ *              place processing). The message can be removed using
++ *              vchi_msg_remove when you're finished
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_peek(VCHI_SERVICE_HANDLE_T handle,
++	void **data,
++	uint32_t *msg_size,
++	VCHI_FLAGS_T flags)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_HEADER_T *header;
++
++	WARN_ON((flags != VCHI_FLAGS_NONE) &&
++		(flags != VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE));
++
++	if (flags == VCHI_FLAGS_NONE)
++		if (vchiu_queue_is_empty(&service->queue))
++			return -1;
++
++	header = vchiu_queue_peek(&service->queue);
++
++	*data = header->data;
++	*msg_size = header->size;
++
++	return 0;
++}
++EXPORT_SYMBOL(vchi_msg_peek);
++
++/***********************************************************
++ * Name: vchi_msg_remove
++ *
++ * Arguments:  const VCHI_SERVICE_HANDLE_T handle,
++ *
++ * Description: Routine to remove a message (after it has been read with
++ *              vchi_msg_peek)
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_remove(VCHI_SERVICE_HANDLE_T handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_HEADER_T *header;
++
++	header = vchiu_queue_pop(&service->queue);
++
++	vchiq_release_message(service->handle, header);
++
++	return 0;
++}
++EXPORT_SYMBOL(vchi_msg_remove);
++
++/***********************************************************
++ * Name: vchi_msg_queue
++ *
++ * Arguments:  VCHI_SERVICE_HANDLE_T handle,
++ *             const void *data,
++ *             uint32_t data_size,
++ *             VCHI_FLAGS_T flags,
++ *             void *msg_handle,
++ *
++ * Description: Thin wrapper to queue a message onto a connection
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle,
++	const void *data,
++	uint32_t data_size,
++	VCHI_FLAGS_T flags,
++	void *msg_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_ELEMENT_T element = {data, data_size};
++	VCHIQ_STATUS_T status;
++
++	(void)msg_handle;
++
++	WARN_ON(flags != VCHI_FLAGS_BLOCK_UNTIL_QUEUED);
++
++	status = vchiq_queue_message(service->handle, &element, 1);
++
++	/* vchiq_queue_message() may return VCHIQ_RETRY, so we need to
++	** implement a retry mechanism since this function is supposed
++	** to block until queued
++	*/
++	while (status == VCHIQ_RETRY) {
++		msleep(1);
++		status = vchiq_queue_message(service->handle, &element, 1);
++	}
++
++	return vchiq_status_to_vchi(status);
++}
++EXPORT_SYMBOL(vchi_msg_queue);
++
++/***********************************************************
++ * Name: vchi_bulk_queue_receive
++ *
++ * Arguments:  VCHI_BULK_HANDLE_T handle,
++ *             void *data_dst,
++ *             const uint32_t data_size,
++ *             VCHI_FLAGS_T flags
++ *             void *bulk_handle
++ *
++ * Description: Routine to setup a rcv buffer
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_bulk_queue_receive(VCHI_SERVICE_HANDLE_T handle,
++	void *data_dst,
++	uint32_t data_size,
++	VCHI_FLAGS_T flags,
++	void *bulk_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_BULK_MODE_T mode;
++	VCHIQ_STATUS_T status;
++
++	switch ((int)flags) {
++	case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE
++		| VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
++		WARN_ON(!service->callback);
++		mode = VCHIQ_BULK_MODE_CALLBACK;
++		break;
++	case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE:
++		mode = VCHIQ_BULK_MODE_BLOCKING;
++		break;
++	case VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
++	case VCHI_FLAGS_NONE:
++		mode = VCHIQ_BULK_MODE_NOCALLBACK;
++		break;
++	default:
++		WARN(1, "unsupported message\n");
++		return vchiq_status_to_vchi(VCHIQ_ERROR);
++	}
++
++	status = vchiq_bulk_receive(service->handle, data_dst, data_size,
++		bulk_handle, mode);
++
++	/* vchiq_bulk_receive() may return VCHIQ_RETRY, so we need to
++	** implement a retry mechanism since this function is supposed
++	** to block until queued
++	*/
++	while (status == VCHIQ_RETRY) {
++		msleep(1);
++		status = vchiq_bulk_receive(service->handle, data_dst,
++			data_size, bulk_handle, mode);
++	}
++
++	return vchiq_status_to_vchi(status);
++}
++EXPORT_SYMBOL(vchi_bulk_queue_receive);
++
++/***********************************************************
++ * Name: vchi_bulk_queue_transmit
++ *
++ * Arguments:  VCHI_BULK_HANDLE_T handle,
++ *             const void *data_src,
++ *             uint32_t data_size,
++ *             VCHI_FLAGS_T flags,
++ *             void *bulk_handle
++ *
++ * Description: Routine to transmit some data
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_bulk_queue_transmit(VCHI_SERVICE_HANDLE_T handle,
++	const void *data_src,
++	uint32_t data_size,
++	VCHI_FLAGS_T flags,
++	void *bulk_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_BULK_MODE_T mode;
++	VCHIQ_STATUS_T status;
++
++	switch ((int)flags) {
++	case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE
++		| VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
++		WARN_ON(!service->callback);
++		mode = VCHIQ_BULK_MODE_CALLBACK;
++		break;
++	case VCHI_FLAGS_BLOCK_UNTIL_DATA_READ:
++	case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE:
++		mode = VCHIQ_BULK_MODE_BLOCKING;
++		break;
++	case VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
++	case VCHI_FLAGS_NONE:
++		mode = VCHIQ_BULK_MODE_NOCALLBACK;
++		break;
++	default:
++		WARN(1, "unsupported message\n");
++		return vchiq_status_to_vchi(VCHIQ_ERROR);
++	}
++
++	status = vchiq_bulk_transmit(service->handle, data_src, data_size,
++		bulk_handle, mode);
++
++	/* vchiq_bulk_transmit() may return VCHIQ_RETRY, so we need to
++	** implement a retry mechanism since this function is supposed
++	** to block until queued
++	*/
++	while (status == VCHIQ_RETRY) {
++		msleep(1);
++		status = vchiq_bulk_transmit(service->handle, data_src,
++			data_size, bulk_handle, mode);
++	}
++
++	return vchiq_status_to_vchi(status);
++}
++EXPORT_SYMBOL(vchi_bulk_queue_transmit);
++
++/***********************************************************
++ * Name: vchi_msg_dequeue
++ *
++ * Arguments:  VCHI_SERVICE_HANDLE_T handle,
++ *             void *data,
++ *             uint32_t max_data_size_to_read,
++ *             uint32_t *actual_msg_size
++ *             VCHI_FLAGS_T flags
++ *
++ * Description: Routine to dequeue a message into the supplied buffer
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_dequeue(VCHI_SERVICE_HANDLE_T handle,
++	void *data,
++	uint32_t max_data_size_to_read,
++	uint32_t *actual_msg_size,
++	VCHI_FLAGS_T flags)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_HEADER_T *header;
++
++	WARN_ON((flags != VCHI_FLAGS_NONE) &&
++		(flags != VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE));
++
++	if (flags == VCHI_FLAGS_NONE)
++		if (vchiu_queue_is_empty(&service->queue))
++			return -1;
++
++	header = vchiu_queue_pop(&service->queue);
++
++	memcpy(data, header->data, header->size < max_data_size_to_read ?
++		header->size : max_data_size_to_read);
++
++	*actual_msg_size = header->size;
++
++	vchiq_release_message(service->handle, header);
++
++	return 0;
++}
++EXPORT_SYMBOL(vchi_msg_dequeue);
++
++/***********************************************************
++ * Name: vchi_msg_queuev
++ *
++ * Arguments:  VCHI_SERVICE_HANDLE_T handle,
++ *             VCHI_MSG_VECTOR_T *vector,
++ *             uint32_t count,
++ *             VCHI_FLAGS_T flags,
++ *             void *msg_handle
++ *
++ * Description: Thin wrapper to queue a message onto a connection
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++
++vchiq_static_assert(sizeof(VCHI_MSG_VECTOR_T) == sizeof(VCHIQ_ELEMENT_T));
++vchiq_static_assert(offsetof(VCHI_MSG_VECTOR_T, vec_base) ==
++	offsetof(VCHIQ_ELEMENT_T, data));
++vchiq_static_assert(offsetof(VCHI_MSG_VECTOR_T, vec_len) ==
++	offsetof(VCHIQ_ELEMENT_T, size));
++
++int32_t vchi_msg_queuev(VCHI_SERVICE_HANDLE_T handle,
++	VCHI_MSG_VECTOR_T *vector,
++	uint32_t count,
++	VCHI_FLAGS_T flags,
++	void *msg_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++
++	(void)msg_handle;
++
++	WARN_ON(flags != VCHI_FLAGS_BLOCK_UNTIL_QUEUED);
++
++	return vchiq_status_to_vchi(vchiq_queue_message(service->handle,
++		(const VCHIQ_ELEMENT_T *)vector, count));
++}
++EXPORT_SYMBOL(vchi_msg_queuev);
++
++/***********************************************************
++ * Name: vchi_held_msg_release
++ *
++ * Arguments:  VCHI_HELD_MSG_T *message
++ *
++ * Description: Routine to release a held message (after it has been read with
++ *              vchi_msg_hold)
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_held_msg_release(VCHI_HELD_MSG_T *message)
++{
++	vchiq_release_message((VCHIQ_SERVICE_HANDLE_T)message->service,
++		(VCHIQ_HEADER_T *)message->message);
++
++	return 0;
++}
++
++/***********************************************************
++ * Name: vchi_msg_hold
++ *
++ * Arguments:  VCHI_SERVICE_HANDLE_T handle,
++ *             void **data,
++ *             uint32_t *msg_size,
++ *             VCHI_FLAGS_T flags,
++ *             VCHI_HELD_MSG_T *message_handle
++ *
++ * Description: Routine to return a pointer to the current message (to allow
++ *              in place processing). The message is dequeued - don't forget
++ *              to release the message using vchi_held_msg_release when you're
++ *              finished.
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_hold(VCHI_SERVICE_HANDLE_T handle,
++	void **data,
++	uint32_t *msg_size,
++	VCHI_FLAGS_T flags,
++	VCHI_HELD_MSG_T *message_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_HEADER_T *header;
++
++	WARN_ON((flags != VCHI_FLAGS_NONE) &&
++		(flags != VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE));
++
++	if (flags == VCHI_FLAGS_NONE)
++		if (vchiu_queue_is_empty(&service->queue))
++			return -1;
++
++	header = vchiu_queue_pop(&service->queue);
++
++	*data = header->data;
++	*msg_size = header->size;
++
++	message_handle->service =
++		(struct opaque_vchi_service_t *)service->handle;
++	message_handle->message = header;
++
++	return 0;
++}
++
++/***********************************************************
++ * Name: vchi_initialise
++ *
++ * Arguments: VCHI_INSTANCE_T *instance_handle
++ *            VCHI_CONNECTION_T **connections
++ *            const uint32_t num_connections
++ *
++ * Description: Initialises the hardware but does not transmit anything
++ *              When run as a Host App this will be called twice hence the need
++ *              to malloc the state information
++ *
++ * Returns: 0 if successful, failure otherwise
++ *
++ ***********************************************************/
++
++int32_t vchi_initialise(VCHI_INSTANCE_T *instance_handle)
++{
++	VCHIQ_INSTANCE_T instance;
++	VCHIQ_STATUS_T status;
++
++	status = vchiq_initialise(&instance);
++
++	*instance_handle = (VCHI_INSTANCE_T)instance;
++
++	return vchiq_status_to_vchi(status);
++}
++EXPORT_SYMBOL(vchi_initialise);
++
++/***********************************************************
++ * Name: vchi_connect
++ *
++ * Arguments: VCHI_CONNECTION_T **connections
++ *            const uint32_t num_connections
++ *            VCHI_INSTANCE_T instance_handle)
++ *
++ * Description: Starts the command service on each connection,
++ *              causing INIT messages to be pinged back and forth
++ *
++ * Returns: 0 if successful, failure otherwise
++ *
++ ***********************************************************/
++int32_t vchi_connect(VCHI_CONNECTION_T **connections,
++	const uint32_t num_connections,
++	VCHI_INSTANCE_T instance_handle)
++{
++	VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle;
++
++	(void)connections;
++	(void)num_connections;
++
++	return vchiq_connect(instance);
++}
++EXPORT_SYMBOL(vchi_connect);
++
++
++/***********************************************************
++ * Name: vchi_disconnect
++ *
++ * Arguments: VCHI_INSTANCE_T instance_handle
++ *
++ * Description: Stops the command service on each connection,
++ *              causing DE-INIT messages to be pinged back and forth
++ *
++ * Returns: 0 if successful, failure otherwise
++ *
++ ***********************************************************/
++int32_t vchi_disconnect(VCHI_INSTANCE_T instance_handle)
++{
++	VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle;
++	return vchiq_status_to_vchi(vchiq_shutdown(instance));
++}
++EXPORT_SYMBOL(vchi_disconnect);
++
++
++/***********************************************************
++ * Name: vchi_service_open
++ * Name: vchi_service_create
++ *
++ * Arguments: VCHI_INSTANCE_T *instance_handle
++ *            SERVICE_CREATION_T *setup,
++ *            VCHI_SERVICE_HANDLE_T *handle
++ *
++ * Description: Routine to open a service
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++
++static VCHIQ_STATUS_T shim_callback(VCHIQ_REASON_T reason,
++	VCHIQ_HEADER_T *header, VCHIQ_SERVICE_HANDLE_T handle, void *bulk_user)
++{
++	SHIM_SERVICE_T *service =
++		(SHIM_SERVICE_T *)VCHIQ_GET_SERVICE_USERDATA(handle);
++
++	switch (reason) {
++	case VCHIQ_MESSAGE_AVAILABLE:
++		vchiu_queue_push(&service->queue, header);
++
++		if (service->callback)
++			service->callback(service->callback_param,
++				VCHI_CALLBACK_MSG_AVAILABLE, NULL);
++		break;
++	case VCHIQ_BULK_TRANSMIT_DONE:
++		if (service->callback)
++			service->callback(service->callback_param,
++				VCHI_CALLBACK_BULK_SENT, bulk_user);
++		break;
++	case VCHIQ_BULK_RECEIVE_DONE:
++		if (service->callback)
++			service->callback(service->callback_param,
++				VCHI_CALLBACK_BULK_RECEIVED, bulk_user);
++		break;
++	case VCHIQ_SERVICE_CLOSED:
++		if (service->callback)
++			service->callback(service->callback_param,
++				VCHI_CALLBACK_SERVICE_CLOSED, NULL);
++		break;
++	case VCHIQ_SERVICE_OPENED:
++		/* No equivalent VCHI reason */
++		break;
++	case VCHIQ_BULK_TRANSMIT_ABORTED:
++		if (service->callback)
++			service->callback(service->callback_param,
++				VCHI_CALLBACK_BULK_TRANSMIT_ABORTED, bulk_user);
++		break;
++	case VCHIQ_BULK_RECEIVE_ABORTED:
++		if (service->callback)
++			service->callback(service->callback_param,
++				VCHI_CALLBACK_BULK_RECEIVE_ABORTED, bulk_user);
++		break;
++	default:
++		WARN(1, "not supported\n");
++		break;
++	}
++
++	return VCHIQ_SUCCESS;
++}
++
++static SHIM_SERVICE_T *service_alloc(VCHIQ_INSTANCE_T instance,
++	SERVICE_CREATION_T *setup)
++{
++	SHIM_SERVICE_T *service = kzalloc(sizeof(SHIM_SERVICE_T), GFP_KERNEL);
++
++	(void)instance;
++
++	if (service) {
++		if (vchiu_queue_init(&service->queue, 64)) {
++			service->callback = setup->callback;
++			service->callback_param = setup->callback_param;
++		} else {
++			kfree(service);
++			service = NULL;
++		}
++	}
++
++	return service;
++}
++
++static void service_free(SHIM_SERVICE_T *service)
++{
++	if (service) {
++		vchiu_queue_delete(&service->queue);
++		kfree(service);
++	}
++}
++
++int32_t vchi_service_open(VCHI_INSTANCE_T instance_handle,
++	SERVICE_CREATION_T *setup,
++	VCHI_SERVICE_HANDLE_T *handle)
++{
++	VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle;
++	SHIM_SERVICE_T *service = service_alloc(instance, setup);
++	if (service) {
++		VCHIQ_SERVICE_PARAMS_T params;
++		VCHIQ_STATUS_T status;
++
++		memset(&params, 0, sizeof(params));
++		params.fourcc = setup->service_id;
++		params.callback = shim_callback;
++		params.userdata = service;
++		params.version = setup->version.version;
++		params.version_min = setup->version.version_min;
++
++		status = vchiq_open_service(instance, &params,
++			&service->handle);
++		if (status != VCHIQ_SUCCESS) {
++			service_free(service);
++			service = NULL;
++		}
++	}
++
++	*handle = (VCHI_SERVICE_HANDLE_T)service;
++
++	return (service != NULL) ? 0 : -1;
++}
++EXPORT_SYMBOL(vchi_service_open);
++
++int32_t vchi_service_create(VCHI_INSTANCE_T instance_handle,
++	SERVICE_CREATION_T *setup,
++	VCHI_SERVICE_HANDLE_T *handle)
++{
++	VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle;
++	SHIM_SERVICE_T *service = service_alloc(instance, setup);
++	if (service) {
++		VCHIQ_SERVICE_PARAMS_T params;
++		VCHIQ_STATUS_T status;
++
++		memset(&params, 0, sizeof(params));
++		params.fourcc = setup->service_id;
++		params.callback = shim_callback;
++		params.userdata = service;
++		params.version = setup->version.version;
++		params.version_min = setup->version.version_min;
++		status = vchiq_add_service(instance, &params, &service->handle);
++
++		if (status != VCHIQ_SUCCESS) {
++			service_free(service);
++			service = NULL;
++		}
++	}
++
++	*handle = (VCHI_SERVICE_HANDLE_T)service;
++
++	return (service != NULL) ? 0 : -1;
++}
++EXPORT_SYMBOL(vchi_service_create);
++
++int32_t vchi_service_close(const VCHI_SERVICE_HANDLE_T handle)
++{
++	int32_t ret = -1;
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	if (service) {
++		VCHIQ_STATUS_T status = vchiq_close_service(service->handle);
++		if (status == VCHIQ_SUCCESS) {
++			service_free(service);
++			service = NULL;
++		}
++
++		ret = vchiq_status_to_vchi(status);
++	}
++	return ret;
++}
++EXPORT_SYMBOL(vchi_service_close);
++
++int32_t vchi_service_destroy(const VCHI_SERVICE_HANDLE_T handle)
++{
++	int32_t ret = -1;
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	if (service) {
++		VCHIQ_STATUS_T status = vchiq_remove_service(service->handle);
++		if (status == VCHIQ_SUCCESS) {
++			service_free(service);
++			service = NULL;
++		}
++
++		ret = vchiq_status_to_vchi(status);
++	}
++	return ret;
++}
++EXPORT_SYMBOL(vchi_service_destroy);
++
++int32_t vchi_get_peer_version( const VCHI_SERVICE_HANDLE_T handle, short *peer_version )
++{
++   int32_t ret = -1;
++   SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++   if(service)
++   {
++      VCHIQ_STATUS_T status = vchiq_get_peer_version(service->handle, peer_version);
++      ret = vchiq_status_to_vchi( status );
++   }
++   return ret;
++}
++EXPORT_SYMBOL(vchi_get_peer_version);
++
++/* ----------------------------------------------------------------------
++ * read a uint32_t from buffer.
++ * network format is defined to be little endian
++ * -------------------------------------------------------------------- */
++uint32_t
++vchi_readbuf_uint32(const void *_ptr)
++{
++	const unsigned char *ptr = _ptr;
++	return ptr[0] | (ptr[1] << 8) | (ptr[2] << 16) | (ptr[3] << 24);
++}
++
++/* ----------------------------------------------------------------------
++ * write a uint32_t to buffer.
++ * network format is defined to be little endian
++ * -------------------------------------------------------------------- */
++void
++vchi_writebuf_uint32(void *_ptr, uint32_t value)
++{
++	unsigned char *ptr = _ptr;
++	ptr[0] = (unsigned char)((value >> 0)  & 0xFF);
++	ptr[1] = (unsigned char)((value >> 8)  & 0xFF);
++	ptr[2] = (unsigned char)((value >> 16) & 0xFF);
++	ptr[3] = (unsigned char)((value >> 24) & 0xFF);
++}
++
++/* ----------------------------------------------------------------------
++ * read a uint16_t from buffer.
++ * network format is defined to be little endian
++ * -------------------------------------------------------------------- */
++uint16_t
++vchi_readbuf_uint16(const void *_ptr)
++{
++	const unsigned char *ptr = _ptr;
++	return ptr[0] | (ptr[1] << 8);
++}
++
++/* ----------------------------------------------------------------------
++ * write a uint16_t into the buffer.
++ * network format is defined to be little endian
++ * -------------------------------------------------------------------- */
++void
++vchi_writebuf_uint16(void *_ptr, uint16_t value)
++{
++	unsigned char *ptr = _ptr;
++	ptr[0] = (value >> 0)  & 0xFF;
++	ptr[1] = (value >> 8)  & 0xFF;
++}
++
++/***********************************************************
++ * Name: vchi_service_use
++ *
++ * Arguments: const VCHI_SERVICE_HANDLE_T handle
++ *
++ * Description: Routine to increment refcount on a service
++ *
++ * Returns: void
++ *
++ ***********************************************************/
++int32_t vchi_service_use(const VCHI_SERVICE_HANDLE_T handle)
++{
++	int32_t ret = -1;
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	if (service)
++		ret = vchiq_status_to_vchi(vchiq_use_service(service->handle));
++	return ret;
++}
++EXPORT_SYMBOL(vchi_service_use);
++
++/***********************************************************
++ * Name: vchi_service_release
++ *
++ * Arguments: const VCHI_SERVICE_HANDLE_T handle
++ *
++ * Description: Routine to decrement refcount on a service
++ *
++ * Returns: void
++ *
++ ***********************************************************/
++int32_t vchi_service_release(const VCHI_SERVICE_HANDLE_T handle)
++{
++	int32_t ret = -1;
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	if (service)
++		ret = vchiq_status_to_vchi(
++			vchiq_release_service(service->handle));
++	return ret;
++}
++EXPORT_SYMBOL(vchi_service_release);
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,120 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include "vchiq_util.h"
++
++static inline int is_pow2(int i)
++{
++	return i && !(i & (i - 1));
++}
++
++int vchiu_queue_init(VCHIU_QUEUE_T *queue, int size)
++{
++	WARN_ON(!is_pow2(size));
++
++	queue->size = size;
++	queue->read = 0;
++	queue->write = 0;
++
++	sema_init(&queue->pop, 0);
++	sema_init(&queue->push, 0);
++
++	queue->storage = kzalloc(size * sizeof(VCHIQ_HEADER_T *), GFP_KERNEL);
++	if (queue->storage == NULL) {
++		vchiu_queue_delete(queue);
++		return 0;
++	}
++	return 1;
++}
++
++void vchiu_queue_delete(VCHIU_QUEUE_T *queue)
++{
++	if (queue->storage != NULL)
++		kfree(queue->storage);
++}
++
++int vchiu_queue_is_empty(VCHIU_QUEUE_T *queue)
++{
++	return queue->read == queue->write;
++}
++
++int vchiu_queue_is_full(VCHIU_QUEUE_T *queue)
++{
++	return queue->write == queue->read + queue->size;
++}
++
++void vchiu_queue_push(VCHIU_QUEUE_T *queue, VCHIQ_HEADER_T *header)
++{
++	while (queue->write == queue->read + queue->size) {
++		if (down_interruptible(&queue->pop) != 0) {
++			flush_signals(current);
++		}
++	}
++
++	queue->storage[queue->write & (queue->size - 1)] = header;
++
++	queue->write++;
++
++	up(&queue->push);
++}
++
++VCHIQ_HEADER_T *vchiu_queue_peek(VCHIU_QUEUE_T *queue)
++{
++	while (queue->write == queue->read) {
++		if (down_interruptible(&queue->push) != 0) {
++			flush_signals(current);
++		}
++	}
++
++	up(&queue->push); // We haven't removed anything from the queue.
++	return queue->storage[queue->read & (queue->size - 1)];
++}
++
++VCHIQ_HEADER_T *vchiu_queue_pop(VCHIU_QUEUE_T *queue)
++{
++	VCHIQ_HEADER_T *header;
++
++	while (queue->write == queue->read) {
++		if (down_interruptible(&queue->push) != 0) {
++			flush_signals(current);
++		}
++	}
++
++	header = queue->storage[queue->read & (queue->size - 1)];
++
++	queue->read++;
++
++	up(&queue->pop);
++
++	return header;
++}
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,82 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_UTIL_H
++#define VCHIQ_UTIL_H
++
++#include <linux/types.h>
++#include <linux/semaphore.h>
++#include <linux/mutex.h>
++#include <linux/bitops.h>
++#include <linux/kthread.h>
++#include <linux/wait.h>
++#include <linux/vmalloc.h>
++#include <linux/jiffies.h>
++#include <linux/delay.h>
++#include <linux/string.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/random.h>
++#include <linux/sched.h>
++#include <linux/ctype.h>
++#include <linux/uaccess.h>
++#include <linux/time.h>  /* for time_t */
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++
++#include "vchiq_if.h"
++
++typedef struct {
++	int size;
++	int read;
++	int write;
++
++	struct semaphore pop;
++	struct semaphore push;
++
++	VCHIQ_HEADER_T **storage;
++} VCHIU_QUEUE_T;
++
++extern int  vchiu_queue_init(VCHIU_QUEUE_T *queue, int size);
++extern void vchiu_queue_delete(VCHIU_QUEUE_T *queue);
++
++extern int vchiu_queue_is_empty(VCHIU_QUEUE_T *queue);
++extern int vchiu_queue_is_full(VCHIU_QUEUE_T *queue);
++
++extern void vchiu_queue_push(VCHIU_QUEUE_T *queue, VCHIQ_HEADER_T *header);
++
++extern VCHIQ_HEADER_T *vchiu_queue_peek(VCHIU_QUEUE_T *queue);
++extern VCHIQ_HEADER_T *vchiu_queue_pop(VCHIU_QUEUE_T *queue);
++
++#endif
++
+diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c
+--- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,59 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++#include "vchiq_build_info.h"
++#include <linux/broadcom/vc_debug_sym.h>
++
++VC_DEBUG_DECLARE_STRING_VAR( vchiq_build_hostname, "dc4-arm-01" );
++VC_DEBUG_DECLARE_STRING_VAR( vchiq_build_version, "9245b4c35b99b3870e1f7dc598c5692b3c66a6f0 (tainted)" );
++VC_DEBUG_DECLARE_STRING_VAR( vchiq_build_time,    __TIME__ );
++VC_DEBUG_DECLARE_STRING_VAR( vchiq_build_date,    __DATE__ );
++
++const char *vchiq_get_build_hostname( void )
++{
++   return vchiq_build_hostname;
++}
++
++const char *vchiq_get_build_version( void )
++{
++   return vchiq_build_version;
++}
++
++const char *vchiq_get_build_date( void )
++{
++   return vchiq_build_date;
++}
++
++const char *vchiq_get_build_time( void )
++{
++   return vchiq_build_time;
++}
+diff -urN linux-3.10/drivers/misc/vc04_services/Kconfig linux-rpi-3.10.y/drivers/misc/vc04_services/Kconfig
+--- linux-3.10/drivers/misc/vc04_services/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,10 @@
++config BCM2708_VCHIQ
++	tristate "Videocore VCHIQ"
++	depends on MACH_BCM2708
++	default y
++	help
++		Kernel to VideoCore communication interface for the
++		BCM2708 family of products.
++		Defaults to Y when the Broadcom Videocore services
++		are included in the build, N otherwise.
++
+diff -urN linux-3.10/drivers/misc/vc04_services/Makefile linux-rpi-3.10.y/drivers/misc/vc04_services/Makefile
+--- linux-3.10/drivers/misc/vc04_services/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/misc/vc04_services/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,18 @@
++ifeq ($(CONFIG_MACH_BCM2708),y)
++
++obj-$(CONFIG_BCM2708_VCHIQ)	+= vchiq.o
++
++vchiq-objs := \
++   interface/vchiq_arm/vchiq_core.o  \
++   interface/vchiq_arm/vchiq_arm.o \
++   interface/vchiq_arm/vchiq_kern_lib.o \
++   interface/vchiq_arm/vchiq_2835_arm.o \
++   interface/vchiq_arm/vchiq_proc.o \
++   interface/vchiq_arm/vchiq_shim.o \
++   interface/vchiq_arm/vchiq_util.o \
++   interface/vchiq_arm/vchiq_connected.o \
++
++EXTRA_CFLAGS += -DVCOS_VERIFY_BKPTS=1 -Idrivers/misc/vc04_services -DUSE_VCHIQ_ARM -D__VCCOREVER__=0x04000000
++
++endif
++
+diff -urN linux-3.10/include/linux/broadcom/vc_cma.h linux-rpi-3.10.y/include/linux/broadcom/vc_cma.h
+--- linux-3.10/include/linux/broadcom/vc_cma.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/include/linux/broadcom/vc_cma.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,30 @@
++/*****************************************************************************
++* Copyright 2012 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#if !defined( VC_CMA_H )
++#define VC_CMA_H
++
++#include <linux/ioctl.h>
++
++#define VC_CMA_IOC_MAGIC 0xc5
++
++#define VC_CMA_IOC_RESERVE _IO(VC_CMA_IOC_MAGIC, 0)
++
++#ifdef __KERNEL__
++extern void __init vc_cma_early_init(void);
++extern void __init vc_cma_reserve(void);
++#endif
++
++#endif /* VC_CMA_H */
++
diff --git a/target/linux/brcm2708/patches-3.10/006-Allow-mac-address-to-be-set-in-smsc95xx.patch b/target/linux/brcm2708/patches-3.10/006-Allow-mac-address-to-be-set-in-smsc95xx.patch
new file mode 100644
index 0000000000..5a243bba65
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/006-Allow-mac-address-to-be-set-in-smsc95xx.patch
@@ -0,0 +1,82 @@
+diff -urN linux-3.10/drivers/net/usb/smsc95xx.c linux-rpi-3.10.y/drivers/net/usb/smsc95xx.c
+--- linux-3.10/drivers/net/usb/smsc95xx.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/net/usb/smsc95xx.c	2013-07-06 15:25:50.000000000 +0100
+@@ -61,6 +61,7 @@
+ #define SUSPEND_SUSPEND3		(0x08)
+ #define SUSPEND_ALLMODES		(SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
+ 					 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
++#define MAC_ADDR_LEN                    (6)
+ 
+ struct smsc95xx_priv {
+ 	u32 mac_cr;
+@@ -76,6 +77,10 @@
+ module_param(turbo_mode, bool, 0644);
+ MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+ 
++static char *macaddr = ":";
++module_param(macaddr, charp, 0);
++MODULE_PARM_DESC(macaddr, "MAC address");
++
+ static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
+ 					    u32 *data, int in_pm)
+ {
+@@ -765,8 +770,59 @@
+ 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+ }
+ 
++/* Check the macaddr module parameter for a MAC address */
++static int smsc95xx_is_macaddr_param(struct usbnet *dev, u8 *dev_mac)
++{
++       int i, j, got_num, num;
++       u8 mtbl[MAC_ADDR_LEN];
++
++       if (macaddr[0] == ':')
++               return 0;
++
++       i = 0;
++       j = 0;
++       num = 0;
++       got_num = 0;
++       while (j < MAC_ADDR_LEN) {
++               if (macaddr[i] && macaddr[i] != ':') {
++                       got_num++;
++                       if ('0' <= macaddr[i] && macaddr[i] <= '9')
++                               num = num * 16 + macaddr[i] - '0';
++                       else if ('A' <= macaddr[i] && macaddr[i] <= 'F')
++                               num = num * 16 + 10 + macaddr[i] - 'A';
++                       else if ('a' <= macaddr[i] && macaddr[i] <= 'f')
++                               num = num * 16 + 10 + macaddr[i] - 'a';
++                       else
++                               break;
++                       i++;
++               } else if (got_num == 2) {
++                       mtbl[j++] = (u8) num;
++                       num = 0;
++                       got_num = 0;
++                       i++;
++               } else {
++                       break;
++               }
++       }
++
++       if (j == MAC_ADDR_LEN) {
++               netif_dbg(dev, ifup, dev->net, "Overriding MAC address with: "
++               "%02x:%02x:%02x:%02x:%02x:%02x\n", mtbl[0], mtbl[1], mtbl[2],
++                                               mtbl[3], mtbl[4], mtbl[5]);
++               for (i = 0; i < MAC_ADDR_LEN; i++)
++                       dev_mac[i] = mtbl[i];
++               return 1;
++       } else {
++               return 0;
++       }
++}
++
+ static void smsc95xx_init_mac_address(struct usbnet *dev)
+ {
++       /* Check module parameters */
++       if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr))
++               return;
++
+ 	/* try reading mac address from EEPROM */
+ 	if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+ 			dev->net->dev_addr) == 0) {
diff --git a/target/linux/brcm2708/patches-3.10/007-bcm2708_hw_random-driver.patch b/target/linux/brcm2708/patches-3.10/007-bcm2708_hw_random-driver.patch
new file mode 100644
index 0000000000..480532616e
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/007-bcm2708_hw_random-driver.patch
@@ -0,0 +1,148 @@
+diff -urN linux-3.10/drivers/char/hw_random/bcm2708-rng.c linux-rpi-3.10.y/drivers/char/hw_random/bcm2708-rng.c
+--- linux-3.10/drivers/char/hw_random/bcm2708-rng.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/char/hw_random/bcm2708-rng.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,117 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/hw_random.h>
++#include <linux/printk.h>
++
++#include <asm/io.h>
++#include <mach/hardware.h>
++#include <mach/platform.h>
++
++#define RNG_CTRL		(0x0)
++#define RNG_STATUS		(0x4)
++#define RNG_DATA		(0x8)
++#define RNG_FF_THRESHOLD	(0xc)
++
++/* enable rng */
++#define RNG_RBGEN               0x1
++/* double speed, less random mode */
++#define RNG_RBG2X               0x2
++
++/* the initial numbers generated are "less random" so will be discarded */
++#define RNG_WARMUP_COUNT      0x40000
++
++static int bcm2708_rng_data_read(struct hwrng *rng, u32 *buffer)
++{
++	void __iomem *rng_base = (void __iomem *)rng->priv;
++	unsigned words;
++	/* wait for a random number to be in fifo */
++        do {
++		words = __raw_readl(rng_base + RNG_STATUS)>>24;
++	}
++        while (words == 0);
++	/* read the random number */
++	*buffer = __raw_readl(rng_base + RNG_DATA);
++	return 4;
++}
++
++static struct hwrng bcm2708_rng_ops = {
++	.name		= "bcm2708",
++	.data_read	= bcm2708_rng_data_read,
++};
++
++static int __init bcm2708_rng_init(void)
++{
++	void __iomem *rng_base;
++	int err;
++
++	/* map peripheral */
++	rng_base = ioremap(RNG_BASE, 0x10);
++	pr_info("bcm2708_rng_init=%p\n", rng_base);
++	if (!rng_base) {
++		pr_err("bcm2708_rng_init failed to ioremap\n");
++		return -ENOMEM;
++	}
++	bcm2708_rng_ops.priv = (unsigned long)rng_base;
++	/* register driver */
++	err = hwrng_register(&bcm2708_rng_ops);
++	if (err) {
++		pr_err("bcm2708_rng_init hwrng_register()=%d\n", err);
++		iounmap(rng_base);
++	} else {
++		/* set warm-up count & enable */
++		__raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS);
++		__raw_writel(RNG_RBGEN, rng_base + RNG_CTRL);
++	}
++	return err;
++}
++
++static void __exit bcm2708_rng_exit(void)
++{
++	void __iomem *rng_base = (void __iomem *)bcm2708_rng_ops.priv;
++	pr_info("bcm2708_rng_exit\n");
++	/* disable rng hardware */
++	__raw_writel(0, rng_base + RNG_CTRL);
++	/* unregister driver */
++	hwrng_unregister(&bcm2708_rng_ops);
++	iounmap(rng_base);
++}
++
++module_init(bcm2708_rng_init);
++module_exit(bcm2708_rng_exit);
++
++MODULE_DESCRIPTION("BCM2708 H/W Random Number Generator (RNG) driver");
++MODULE_LICENSE("GPL and additional rights");
+diff -urN linux-3.10/drivers/char/hw_random/Kconfig linux-rpi-3.10.y/drivers/char/hw_random/Kconfig
+--- linux-3.10/drivers/char/hw_random/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/char/hw_random/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -314,3 +314,15 @@
+ 	  module will be called tpm-rng.
+ 
+ 	  If unsure, say Y.
++
++config HW_RANDOM_BCM2708
++	tristate "BCM2708 generic true random number generator support"
++	depends on HW_RANDOM && ARCH_BCM2708
++	---help---
++	 This driver provides the kernel-side support for the BCM2708 hardware.
++
++	 To compile this driver as a module, choose M here: the
++	 module will be called bcm2708-rng.
++
++	 If unsure, say N.
++
+diff -urN linux-3.10/drivers/char/hw_random/Makefile linux-rpi-3.10.y/drivers/char/hw_random/Makefile
+--- linux-3.10/drivers/char/hw_random/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/char/hw_random/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -27,3 +27,4 @@
+ obj-$(CONFIG_HW_RANDOM_EXYNOS)	+= exynos-rng.o
+ obj-$(CONFIG_HW_RANDOM_TPM) += tpm-rng.o
+ obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
++obj-$(CONFIG_HW_RANDOM_BCM2708) += bcm2708-rng.o
diff --git a/target/linux/brcm2708/patches-3.10/008-lirc_rpi_driver.patch b/target/linux/brcm2708/patches-3.10/008-lirc_rpi_driver.patch
new file mode 100644
index 0000000000..ca23a3a9a7
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/008-lirc_rpi_driver.patch
@@ -0,0 +1,723 @@
+diff -urN linux-3.10/drivers/staging/media/lirc/Kconfig linux-rpi-3.10.y/drivers/staging/media/lirc/Kconfig
+--- linux-3.10/drivers/staging/media/lirc/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/staging/media/lirc/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -38,6 +38,12 @@
+ 	help
+ 	  Driver for Homebrew Parallel Port Receivers
+ 
++config LIRC_RPI
++	tristate "Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi"
++	depends on LIRC
++	help
++	  Driver for Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi
++
+ config LIRC_SASEM
+ 	tristate "Sasem USB IR Remote"
+ 	depends on LIRC && USB
+diff -urN linux-3.10/drivers/staging/media/lirc/lirc_rpi.c linux-rpi-3.10.y/drivers/staging/media/lirc/lirc_rpi.c
+--- linux-3.10/drivers/staging/media/lirc/lirc_rpi.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/staging/media/lirc/lirc_rpi.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,692 @@
++/*
++ * lirc_rpi.c
++ *
++ * lirc_rpi - Device driver that records pulse- and pause-lengths
++ *	      (space-lengths) (just like the lirc_serial driver does)
++ *	      between GPIO interrupt events on the Raspberry Pi.
++ *	      Lots of code has been taken from the lirc_serial module,
++ *	      so I would like say thanks to the authors.
++ *
++ * Copyright (C) 2012 Aron Robert Szabo <aron@reon.hu>,
++ *		      Michael Bishop <cleverca22@gmail.com>
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/time.h>
++#include <linux/string.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/spinlock.h>
++#include <media/lirc.h>
++#include <media/lirc_dev.h>
++#include <linux/gpio.h>
++
++#define LIRC_DRIVER_NAME "lirc_rpi"
++#define RBUF_LEN 256
++#define LIRC_TRANSMITTER_LATENCY 256
++
++#ifndef MAX_UDELAY_MS
++#define MAX_UDELAY_US 5000
++#else
++#define MAX_UDELAY_US (MAX_UDELAY_MS*1000)
++#endif
++
++#define dprintk(fmt, args...)					\
++	do {							\
++		if (debug)					\
++			printk(KERN_DEBUG LIRC_DRIVER_NAME ": "	\
++			       fmt, ## args);			\
++	} while (0)
++
++/* module parameters */
++
++/* set the default GPIO input pin */
++static int gpio_in_pin = 18;
++/* set the default GPIO output pin */
++static int gpio_out_pin = 17;
++/* enable debugging messages */
++static int debug;
++/* -1 = auto, 0 = active high, 1 = active low */
++static int sense = -1;
++/* use softcarrier by default */
++static int softcarrier = 1;
++/* 0 = do not invert output, 1 = invert output */
++static int invert = 0;
++
++struct gpio_chip *gpiochip;
++struct irq_chip *irqchip;
++struct irq_data *irqdata;
++
++/* forward declarations */
++static long send_pulse(unsigned long length);
++static void send_space(long length);
++static void lirc_rpi_exit(void);
++
++int valid_gpio_pins[] = { 0, 1, 4, 8, 7, 9, 10, 11, 14, 15, 17, 18, 21, 22, 23,
++	24, 25 };
++
++static struct platform_device *lirc_rpi_dev;
++static struct timeval lasttv = { 0, 0 };
++static struct lirc_buffer rbuf;
++static spinlock_t lock;
++
++/* initialized/set in init_timing_params() */
++static unsigned int freq = 38000;
++static unsigned int duty_cycle = 50;
++static unsigned long period;
++static unsigned long pulse_width;
++static unsigned long space_width;
++
++static void safe_udelay(unsigned long usecs)
++{
++	while (usecs > MAX_UDELAY_US) {
++		udelay(MAX_UDELAY_US);
++		usecs -= MAX_UDELAY_US;
++	}
++	udelay(usecs);
++}
++
++static int init_timing_params(unsigned int new_duty_cycle,
++	unsigned int new_freq)
++{
++	/*
++	 * period, pulse/space width are kept with 8 binary places -
++	 * IE multiplied by 256.
++	 */
++	if (256 * 1000000L / new_freq * new_duty_cycle / 100 <=
++	    LIRC_TRANSMITTER_LATENCY)
++		return -EINVAL;
++	if (256 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <=
++	    LIRC_TRANSMITTER_LATENCY)
++		return -EINVAL;
++	duty_cycle = new_duty_cycle;
++	freq = new_freq;
++	period = 256 * 1000000L / freq;
++	pulse_width = period * duty_cycle / 100;
++	space_width = period - pulse_width;
++	dprintk("in init_timing_params, freq=%d pulse=%ld, "
++		"space=%ld\n", freq, pulse_width, space_width);
++	return 0;
++}
++
++static long send_pulse_softcarrier(unsigned long length)
++{
++	int flag;
++	unsigned long actual, target, d;
++
++	length <<= 8;
++
++	actual = 0; target = 0; flag = 0;
++	while (actual < length) {
++		if (flag) {
++			gpiochip->set(gpiochip, gpio_out_pin, invert);
++			target += space_width;
++		} else {
++			gpiochip->set(gpiochip, gpio_out_pin, !invert);
++			target += pulse_width;
++		}
++		d = (target - actual -
++		     LIRC_TRANSMITTER_LATENCY + 128) >> 8;
++		/*
++		 * Note - we've checked in ioctl that the pulse/space
++		 * widths are big enough so that d is > 0
++		 */
++		udelay(d);
++		actual += (d << 8) + LIRC_TRANSMITTER_LATENCY;
++		flag = !flag;
++	}
++	return (actual-length) >> 8;
++}
++
++static long send_pulse(unsigned long length)
++{
++	if (length <= 0)
++		return 0;
++
++	if (softcarrier) {
++		return send_pulse_softcarrier(length);
++	} else {
++		gpiochip->set(gpiochip, gpio_out_pin, !invert);
++		safe_udelay(length);
++		return 0;
++	}
++}
++
++static void send_space(long length)
++{
++	gpiochip->set(gpiochip, gpio_out_pin, invert);
++	if (length <= 0)
++		return;
++	safe_udelay(length);
++}
++
++static void rbwrite(int l)
++{
++	if (lirc_buffer_full(&rbuf)) {
++		/* no new signals will be accepted */
++		dprintk("Buffer overrun\n");
++		return;
++	}
++	lirc_buffer_write(&rbuf, (void *)&l);
++}
++
++static void frbwrite(int l)
++{
++	/* simple noise filter */
++	static int pulse, space;
++	static unsigned int ptr;
++
++	if (ptr > 0 && (l & PULSE_BIT)) {
++		pulse += l & PULSE_MASK;
++		if (pulse > 250) {
++			rbwrite(space);
++			rbwrite(pulse | PULSE_BIT);
++			ptr = 0;
++			pulse = 0;
++		}
++		return;
++	}
++	if (!(l & PULSE_BIT)) {
++		if (ptr == 0) {
++			if (l > 20000) {
++				space = l;
++				ptr++;
++				return;
++			}
++		} else {
++			if (l > 20000) {
++				space += pulse;
++				if (space > PULSE_MASK)
++					space = PULSE_MASK;
++				space += l;
++				if (space > PULSE_MASK)
++					space = PULSE_MASK;
++				pulse = 0;
++				return;
++			}
++			rbwrite(space);
++			rbwrite(pulse | PULSE_BIT);
++			ptr = 0;
++			pulse = 0;
++		}
++	}
++	rbwrite(l);
++}
++
++static irqreturn_t irq_handler(int i, void *blah, struct pt_regs *regs)
++{
++	struct timeval tv;
++	long deltv;
++	int data;
++	int signal;
++
++	/* use the GPIO signal level */
++	signal = gpiochip->get(gpiochip, gpio_in_pin);
++
++	/* unmask the irq */
++	irqchip->irq_unmask(irqdata);
++
++	if (sense != -1) {
++		/* get current time */
++		do_gettimeofday(&tv);
++
++		/* calc time since last interrupt in microseconds */
++		deltv = tv.tv_sec-lasttv.tv_sec;
++		if (tv.tv_sec < lasttv.tv_sec ||
++		    (tv.tv_sec == lasttv.tv_sec &&
++		     tv.tv_usec < lasttv.tv_usec)) {
++			printk(KERN_WARNING LIRC_DRIVER_NAME
++			       ": AIEEEE: your clock just jumped backwards\n");
++			printk(KERN_WARNING LIRC_DRIVER_NAME
++			       ": %d %d %lx %lx %lx %lx\n", signal, sense,
++			       tv.tv_sec, lasttv.tv_sec,
++			       tv.tv_usec, lasttv.tv_usec);
++			data = PULSE_MASK;
++		} else if (deltv > 15) {
++			data = PULSE_MASK; /* really long time */
++			if (!(signal^sense)) {
++				/* sanity check */
++				printk(KERN_WARNING LIRC_DRIVER_NAME
++				       ": AIEEEE: %d %d %lx %lx %lx %lx\n",
++				       signal, sense, tv.tv_sec, lasttv.tv_sec,
++				       tv.tv_usec, lasttv.tv_usec);
++				/*
++				 * detecting pulse while this
++				 * MUST be a space!
++				 */
++				sense = sense ? 0 : 1;
++			}
++		} else {
++			data = (int) (deltv*1000000 +
++				      (tv.tv_usec - lasttv.tv_usec));
++		}
++		frbwrite(signal^sense ? data : (data|PULSE_BIT));
++		lasttv = tv;
++		wake_up_interruptible(&rbuf.wait_poll);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int is_right_chip(struct gpio_chip *chip, void *data)
++{
++	dprintk("is_right_chip %s %d\n", chip->label, strcmp(data, chip->label));
++
++	if (strcmp(data, chip->label) == 0)
++		return 1;
++	return 0;
++}
++
++static int init_port(void)
++{
++	int i, nlow, nhigh, ret, irq;
++
++	gpiochip = gpiochip_find("bcm2708_gpio", is_right_chip);
++
++	if (!gpiochip)
++		return -ENODEV;
++
++	if (gpio_request(gpio_out_pin, LIRC_DRIVER_NAME " ir/out")) {
++		printk(KERN_ALERT LIRC_DRIVER_NAME
++		       ": cant claim gpio pin %d\n", gpio_out_pin);
++		ret = -ENODEV;
++		goto exit_init_port;
++	}
++
++	if (gpio_request(gpio_in_pin, LIRC_DRIVER_NAME " ir/in")) {
++		printk(KERN_ALERT LIRC_DRIVER_NAME
++		       ": cant claim gpio pin %d\n", gpio_in_pin);
++		ret = -ENODEV;
++		goto exit_gpio_free_out_pin;
++	}
++
++	gpiochip->direction_input(gpiochip, gpio_in_pin);
++	gpiochip->direction_output(gpiochip, gpio_out_pin, 1);
++	gpiochip->set(gpiochip, gpio_out_pin, invert);
++
++	irq = gpiochip->to_irq(gpiochip, gpio_in_pin);
++	dprintk("to_irq %d\n", irq);
++	irqdata = irq_get_irq_data(irq);
++
++	if (irqdata && irqdata->chip) {
++		irqchip = irqdata->chip;
++	} else {
++		ret = -ENODEV;
++		goto exit_gpio_free_in_pin;
++	}
++
++	/* if pin is high, then this must be an active low receiver. */
++	if (sense == -1) {
++		/* wait 1/2 sec for the power supply */
++		msleep(500);
++
++		/*
++		 * probe 9 times every 0.04s, collect "votes" for
++		 * active high/low
++		 */
++		nlow = 0;
++		nhigh = 0;
++		for (i = 0; i < 9; i++) {
++			if (gpiochip->get(gpiochip, gpio_in_pin))
++				nlow++;
++			else
++				nhigh++;
++			msleep(40);
++		}
++		sense = (nlow >= nhigh ? 1 : 0);
++		printk(KERN_INFO LIRC_DRIVER_NAME
++		       ": auto-detected active %s receiver on GPIO pin %d\n",
++		       sense ? "low" : "high", gpio_in_pin);
++	} else {
++		printk(KERN_INFO LIRC_DRIVER_NAME
++		       ": manually using active %s receiver on GPIO pin %d\n",
++		       sense ? "low" : "high", gpio_in_pin);
++	}
++
++	return 0;
++
++	exit_gpio_free_in_pin:
++	gpio_free(gpio_in_pin);
++
++	exit_gpio_free_out_pin:
++	gpio_free(gpio_out_pin);
++
++	exit_init_port:
++	return ret;
++}
++
++// called when the character device is opened
++static int set_use_inc(void *data)
++{
++	int result;
++	unsigned long flags;
++
++	/* initialize timestamp */
++	do_gettimeofday(&lasttv);
++
++	result = request_irq(gpiochip->to_irq(gpiochip, gpio_in_pin),
++			     (irq_handler_t) irq_handler, 0,
++			     LIRC_DRIVER_NAME, (void*) 0);
++
++	switch (result) {
++	case -EBUSY:
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": IRQ %d is busy\n",
++		       gpiochip->to_irq(gpiochip, gpio_in_pin));
++		return -EBUSY;
++	case -EINVAL:
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": Bad irq number or handler\n");
++		return -EINVAL;
++	default:
++		dprintk("Interrupt %d obtained\n",
++			gpiochip->to_irq(gpiochip, gpio_in_pin));
++		break;
++	};
++
++	/* initialize pulse/space widths */
++	init_timing_params(duty_cycle, freq);
++
++	spin_lock_irqsave(&lock, flags);
++
++	/* GPIO Pin Falling/Rising Edge Detect Enable */
++	irqchip->irq_set_type(irqdata,
++			      IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING);
++
++	/* unmask the irq */
++	irqchip->irq_unmask(irqdata);
++
++	spin_unlock_irqrestore(&lock, flags);
++
++	return 0;
++}
++
++static void set_use_dec(void *data)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&lock, flags);
++
++	/* GPIO Pin Falling/Rising Edge Detect Disable */
++	irqchip->irq_set_type(irqdata, 0);
++	irqchip->irq_mask(irqdata);
++
++	spin_unlock_irqrestore(&lock, flags);
++
++	free_irq(gpiochip->to_irq(gpiochip, gpio_in_pin), (void *) 0);
++
++	dprintk(KERN_INFO LIRC_DRIVER_NAME
++		": freed IRQ %d\n", gpiochip->to_irq(gpiochip, gpio_in_pin));
++}
++
++static ssize_t lirc_write(struct file *file, const char *buf,
++	size_t n, loff_t *ppos)
++{
++	int i, count;
++	unsigned long flags;
++	long delta = 0;
++	int *wbuf;
++
++	count = n / sizeof(int);
++	if (n % sizeof(int) || count % 2 == 0)
++		return -EINVAL;
++	wbuf = memdup_user(buf, n);
++	if (IS_ERR(wbuf))
++		return PTR_ERR(wbuf);
++	spin_lock_irqsave(&lock, flags);
++
++	for (i = 0; i < count; i++) {
++		if (i%2)
++			send_space(wbuf[i] - delta);
++		else
++			delta = send_pulse(wbuf[i]);
++	}
++	gpiochip->set(gpiochip, gpio_out_pin, invert);
++
++	spin_unlock_irqrestore(&lock, flags);
++	kfree(wbuf);
++	return n;
++}
++
++static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
++{
++	int result;
++	__u32 value;
++
++	switch (cmd) {
++	case LIRC_GET_SEND_MODE:
++		return -ENOIOCTLCMD;
++		break;
++
++	case LIRC_SET_SEND_MODE:
++		result = get_user(value, (__u32 *) arg);
++		if (result)
++			return result;
++		/* only LIRC_MODE_PULSE supported */
++		if (value != LIRC_MODE_PULSE)
++			return -ENOSYS;
++		break;
++
++	case LIRC_GET_LENGTH:
++		return -ENOSYS;
++		break;
++
++	case LIRC_SET_SEND_DUTY_CYCLE:
++		dprintk("SET_SEND_DUTY_CYCLE\n");
++		result = get_user(value, (__u32 *) arg);
++		if (result)
++			return result;
++		if (value <= 0 || value > 100)
++			return -EINVAL;
++		return init_timing_params(value, freq);
++		break;
++
++	case LIRC_SET_SEND_CARRIER:
++		dprintk("SET_SEND_CARRIER\n");
++		result = get_user(value, (__u32 *) arg);
++		if (result)
++			return result;
++		if (value > 500000 || value < 20000)
++			return -EINVAL;
++		return init_timing_params(duty_cycle, value);
++		break;
++
++	default:
++		return lirc_dev_fop_ioctl(filep, cmd, arg);
++	}
++	return 0;
++}
++
++static const struct file_operations lirc_fops = {
++	.owner		= THIS_MODULE,
++	.write		= lirc_write,
++	.unlocked_ioctl	= lirc_ioctl,
++	.read		= lirc_dev_fop_read,
++	.poll		= lirc_dev_fop_poll,
++	.open		= lirc_dev_fop_open,
++	.release	= lirc_dev_fop_close,
++	.llseek		= no_llseek,
++};
++
++static struct lirc_driver driver = {
++	.name		= LIRC_DRIVER_NAME,
++	.minor		= -1,
++	.code_length	= 1,
++	.sample_rate	= 0,
++	.data		= NULL,
++	.add_to_buf	= NULL,
++	.rbuf		= &rbuf,
++	.set_use_inc	= set_use_inc,
++	.set_use_dec	= set_use_dec,
++	.fops		= &lirc_fops,
++	.dev		= NULL,
++	.owner		= THIS_MODULE,
++};
++
++static struct platform_driver lirc_rpi_driver = {
++	.driver = {
++		.name   = LIRC_DRIVER_NAME,
++		.owner  = THIS_MODULE,
++	},
++};
++
++static int __init lirc_rpi_init(void)
++{
++	int result;
++
++	/* Init read buffer. */
++	result = lirc_buffer_init(&rbuf, sizeof(int), RBUF_LEN);
++	if (result < 0)
++		return -ENOMEM;
++
++	result = platform_driver_register(&lirc_rpi_driver);
++	if (result) {
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": lirc register returned %d\n", result);
++		goto exit_buffer_free;
++	}
++
++	lirc_rpi_dev = platform_device_alloc(LIRC_DRIVER_NAME, 0);
++	if (!lirc_rpi_dev) {
++		result = -ENOMEM;
++		goto exit_driver_unregister;
++	}
++
++	result = platform_device_add(lirc_rpi_dev);
++	if (result)
++		goto exit_device_put;
++
++	return 0;
++
++	exit_device_put:
++	platform_device_put(lirc_rpi_dev);
++
++	exit_driver_unregister:
++	platform_driver_unregister(&lirc_rpi_driver);
++
++	exit_buffer_free:
++	lirc_buffer_free(&rbuf);
++
++	return result;
++}
++
++static void lirc_rpi_exit(void)
++{
++	gpio_free(gpio_out_pin);
++	gpio_free(gpio_in_pin);
++	platform_device_unregister(lirc_rpi_dev);
++	platform_driver_unregister(&lirc_rpi_driver);
++	lirc_buffer_free(&rbuf);
++}
++
++static int __init lirc_rpi_init_module(void)
++{
++	int result, i;
++
++	result = lirc_rpi_init();
++	if (result)
++		return result;
++
++	/* check if the module received valid gpio pin numbers */
++	result = 0;
++	if (gpio_in_pin != gpio_out_pin) {
++		for(i = 0; (i < ARRAY_SIZE(valid_gpio_pins)) && (result != 2); i++) {
++			if (gpio_in_pin == valid_gpio_pins[i] ||
++			   gpio_out_pin == valid_gpio_pins[i]) {
++				result++;
++			}
++		}
++	}
++
++	if (result != 2) {
++		result = -EINVAL;
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": invalid GPIO pin(s) specified!\n");
++		goto exit_rpi;
++	}
++
++	driver.features = LIRC_CAN_SET_SEND_DUTY_CYCLE |
++			  LIRC_CAN_SET_SEND_CARRIER |
++			  LIRC_CAN_SEND_PULSE |
++			  LIRC_CAN_REC_MODE2;
++
++	driver.dev = &lirc_rpi_dev->dev;
++	driver.minor = lirc_register_driver(&driver);
++
++	if (driver.minor < 0) {
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": device registration failed with %d\n", result);
++		result = -EIO;
++		goto exit_rpi;
++	}
++
++	printk(KERN_INFO LIRC_DRIVER_NAME ": driver registered!\n");
++
++	result = init_port();
++	if (result < 0)
++		goto exit_rpi;
++
++	return 0;
++
++	exit_rpi:
++	lirc_rpi_exit();
++
++	return result;
++}
++
++static void __exit lirc_rpi_exit_module(void)
++{
++	lirc_rpi_exit();
++
++	lirc_unregister_driver(driver.minor);
++	printk(KERN_INFO LIRC_DRIVER_NAME ": cleaned up module\n");
++}
++
++module_init(lirc_rpi_init_module);
++module_exit(lirc_rpi_exit_module);
++
++MODULE_DESCRIPTION("Infra-red receiver and blaster driver for Raspberry Pi GPIO.");
++MODULE_AUTHOR("Aron Robert Szabo <aron@reon.hu>");
++MODULE_AUTHOR("Michael Bishop <cleverca22@gmail.com>");
++MODULE_LICENSE("GPL");
++
++module_param(gpio_out_pin, int, S_IRUGO);
++MODULE_PARM_DESC(gpio_out_pin, "GPIO output/transmitter pin number of the BCM"
++		 " processor. Valid pin numbers are: 0, 1, 4, 8, 7, 9, 10, 11,"
++		 " 14, 15, 17, 18, 21, 22, 23, 24, 25, default 17");
++
++module_param(gpio_in_pin, int, S_IRUGO);
++MODULE_PARM_DESC(gpio_in_pin, "GPIO input pin number of the BCM processor."
++		 " Valid pin numbers are: 0, 1, 4, 8, 7, 9, 10, 11, 14, 15,"
++		 " 17, 18, 21, 22, 23, 24, 25, default 18");
++
++module_param(sense, bool, S_IRUGO);
++MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit"
++		 " (0 = active high, 1 = active low )");
++
++module_param(softcarrier, bool, S_IRUGO);
++MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)");
++
++module_param(invert, bool, S_IRUGO);
++MODULE_PARM_DESC(invert, "Invert output (0 = off, 1 = on, default off");
++
++module_param(debug, bool, S_IRUGO | S_IWUSR);
++MODULE_PARM_DESC(debug, "Enable debugging messages");
+diff -urN linux-3.10/drivers/staging/media/lirc/Makefile linux-rpi-3.10.y/drivers/staging/media/lirc/Makefile
+--- linux-3.10/drivers/staging/media/lirc/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/staging/media/lirc/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -7,6 +7,7 @@
+ obj-$(CONFIG_LIRC_IGORPLUGUSB)	+= lirc_igorplugusb.o
+ obj-$(CONFIG_LIRC_IMON)		+= lirc_imon.o
+ obj-$(CONFIG_LIRC_PARALLEL)	+= lirc_parallel.o
++obj-$(CONFIG_LIRC_RPI)		+= lirc_rpi.o
+ obj-$(CONFIG_LIRC_SASEM)	+= lirc_sasem.o
+ obj-$(CONFIG_LIRC_SERIAL)	+= lirc_serial.o
+ obj-$(CONFIG_LIRC_SIR)		+= lirc_sir.o
diff --git a/target/linux/brcm2708/patches-3.10/009-bcm2708-spi-driver.patch b/target/linux/brcm2708/patches-3.10/009-bcm2708-spi-driver.patch
new file mode 100644
index 0000000000..ffddc140cd
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/009-bcm2708-spi-driver.patch
@@ -0,0 +1,659 @@
+diff -urN linux-3.10/drivers/spi/Kconfig linux-rpi-3.10.y/drivers/spi/Kconfig
+--- linux-3.10/drivers/spi/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/spi/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -86,6 +86,14 @@
+ 	  is for the regular SPI controller. Slave mode operation is not also
+ 	  not supported.
+ 
++config SPI_BCM2708
++	tristate "BCM2708 SPI controller driver (SPI0)"
++	depends on MACH_BCM2708
++	help
++	  This selects a driver for the Broadcom BCM2708 SPI master (SPI0). This
++	  driver is not compatible with the "Universal SPI Master" or the SPI slave
++	  device.
++
+ config SPI_BFIN5XX
+ 	tristate "SPI controller driver for ADI Blackfin5xx"
+ 	depends on BLACKFIN
+diff -urN linux-3.10/drivers/spi/Makefile linux-rpi-3.10.y/drivers/spi/Makefile
+--- linux-3.10/drivers/spi/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/spi/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -17,6 +17,7 @@
+ obj-$(CONFIG_SPI_BCM2835)		+= spi-bcm2835.o
+ obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
+ obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
++obj-$(CONFIG_SPI_BCM2708)		+= spi-bcm2708.o
+ obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
+ obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
+diff -urN linux-3.10/drivers/spi/spi-bcm2708.c linux-rpi-3.10.y/drivers/spi/spi-bcm2708.c
+--- linux-3.10/drivers/spi/spi-bcm2708.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/spi/spi-bcm2708.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,626 @@
++/*
++ * Driver for Broadcom BCM2708 SPI Controllers
++ *
++ * Copyright (C) 2012 Chris Boot
++ *
++ * This driver is inspired by:
++ * spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
++ * spi-atmel.c, Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/spi/spi.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/log2.h>
++#include <linux/sched.h>
++#include <linux/wait.h>
++
++/* SPI register offsets */
++#define SPI_CS			0x00
++#define SPI_FIFO		0x04
++#define SPI_CLK			0x08
++#define SPI_DLEN		0x0c
++#define SPI_LTOH		0x10
++#define SPI_DC			0x14
++
++/* Bitfields in CS */
++#define SPI_CS_LEN_LONG		0x02000000
++#define SPI_CS_DMA_LEN		0x01000000
++#define SPI_CS_CSPOL2		0x00800000
++#define SPI_CS_CSPOL1		0x00400000
++#define SPI_CS_CSPOL0		0x00200000
++#define SPI_CS_RXF		0x00100000
++#define SPI_CS_RXR		0x00080000
++#define SPI_CS_TXD		0x00040000
++#define SPI_CS_RXD		0x00020000
++#define SPI_CS_DONE		0x00010000
++#define SPI_CS_LEN		0x00002000
++#define SPI_CS_REN		0x00001000
++#define SPI_CS_ADCS		0x00000800
++#define SPI_CS_INTR		0x00000400
++#define SPI_CS_INTD		0x00000200
++#define SPI_CS_DMAEN		0x00000100
++#define SPI_CS_TA		0x00000080
++#define SPI_CS_CSPOL		0x00000040
++#define SPI_CS_CLEAR_RX		0x00000020
++#define SPI_CS_CLEAR_TX		0x00000010
++#define SPI_CS_CPOL		0x00000008
++#define SPI_CS_CPHA		0x00000004
++#define SPI_CS_CS_10		0x00000002
++#define SPI_CS_CS_01		0x00000001
++
++#define SPI_TIMEOUT_MS	150
++
++#define DRV_NAME	"bcm2708_spi"
++
++struct bcm2708_spi {
++	spinlock_t lock;
++	void __iomem *base;
++	int irq;
++	struct clk *clk;
++	bool stopping;
++
++	struct list_head queue;
++	struct workqueue_struct *workq;
++	struct work_struct work;
++	struct completion done;
++
++	const u8 *tx_buf;
++	u8 *rx_buf;
++	int len;
++};
++
++struct bcm2708_spi_state {
++	u32 cs;
++	u16 cdiv;
++};
++
++/*
++ * This function sets the ALT mode on the SPI pins so that we can use them with
++ * the SPI hardware.
++ *
++ * FIXME: This is a hack. Use pinmux / pinctrl.
++ */
++static void bcm2708_init_pinmode(void)
++{
++#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
++#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
++
++	int pin;
++	u32 *gpio = ioremap(0x20200000, SZ_16K);
++
++	/* SPI is on GPIO 7..11 */
++	for (pin = 7; pin <= 11; pin++) {
++		INP_GPIO(pin);		/* set mode to GPIO input first */
++		SET_GPIO_ALT(pin, 0);	/* set mode to ALT 0 */
++	}
++
++	iounmap(gpio);
++
++#undef INP_GPIO
++#undef SET_GPIO_ALT
++}
++
++static inline u32 bcm2708_rd(struct bcm2708_spi *bs, unsigned reg)
++{
++	return readl(bs->base + reg);
++}
++
++static inline void bcm2708_wr(struct bcm2708_spi *bs, unsigned reg, u32 val)
++{
++	writel(val, bs->base + reg);
++}
++
++static inline void bcm2708_rd_fifo(struct bcm2708_spi *bs, int len)
++{
++	u8 byte;
++
++	while (len--) {
++		byte = bcm2708_rd(bs, SPI_FIFO);
++		if (bs->rx_buf)
++			*bs->rx_buf++ = byte;
++	}
++}
++
++static inline void bcm2708_wr_fifo(struct bcm2708_spi *bs, int len)
++{
++	u8 byte;
++	u16 val;
++
++	if (len > bs->len)
++		len = bs->len;
++
++	if (unlikely(bcm2708_rd(bs, SPI_CS) & SPI_CS_LEN)) {
++		/* LoSSI mode */
++		if (unlikely(len % 2)) {
++			printk(KERN_ERR"bcm2708_wr_fifo: length must be even, skipping.\n");
++			bs->len = 0;
++			return;
++		}
++		while (len) {
++			if (bs->tx_buf) {
++				val = *(const u16 *)bs->tx_buf;
++				bs->tx_buf += 2;
++			} else
++				val = 0;
++			bcm2708_wr(bs, SPI_FIFO, val);
++			bs->len -= 2;
++			len -= 2;
++		}
++		return;
++	}
++
++	while (len--) {
++		byte = bs->tx_buf ? *bs->tx_buf++ : 0;
++		bcm2708_wr(bs, SPI_FIFO, byte);
++		bs->len--;
++	}
++}
++
++static irqreturn_t bcm2708_spi_interrupt(int irq, void *dev_id)
++{
++	struct spi_master *master = dev_id;
++	struct bcm2708_spi *bs = spi_master_get_devdata(master);
++	u32 cs;
++
++	spin_lock(&bs->lock);
++
++	cs = bcm2708_rd(bs, SPI_CS);
++
++	if (cs & SPI_CS_DONE) {
++		if (bs->len) { /* first interrupt in a transfer */
++			/* fill the TX fifo with up to 16 bytes */
++			bcm2708_wr_fifo(bs, 16);
++		} else { /* transfer complete */
++			/* disable interrupts */
++			cs &= ~(SPI_CS_INTR | SPI_CS_INTD);
++			bcm2708_wr(bs, SPI_CS, cs);
++
++			/* drain RX FIFO */
++			while (cs & SPI_CS_RXD) {
++				bcm2708_rd_fifo(bs, 1);
++				cs = bcm2708_rd(bs, SPI_CS);
++			}
++
++			/* wake up our bh */
++			complete(&bs->done);
++		}
++	} else if (cs & SPI_CS_RXR) {
++		/* read 12 bytes of data */
++		bcm2708_rd_fifo(bs, 12);
++
++		/* write up to 12 bytes */
++		bcm2708_wr_fifo(bs, 12);
++	}
++
++	spin_unlock(&bs->lock);
++
++	return IRQ_HANDLED;
++}
++
++static int bcm2708_setup_state(struct spi_master *master,
++		struct device *dev, struct bcm2708_spi_state *state,
++		u32 hz, u8 csel, u8 mode, u8 bpw)
++{
++	struct bcm2708_spi *bs = spi_master_get_devdata(master);
++	int cdiv;
++	unsigned long bus_hz;
++	u32 cs = 0;
++
++	bus_hz = clk_get_rate(bs->clk);
++
++	if (hz >= bus_hz) {
++		cdiv = 2; /* bus_hz / 2 is as fast as we can go */
++	} else if (hz) {
++		cdiv = DIV_ROUND_UP(bus_hz, hz);
++
++		/* CDIV must be a power of 2, so round up */
++		cdiv = roundup_pow_of_two(cdiv);
++
++		if (cdiv > 65536) {
++			dev_dbg(dev,
++				"setup: %d Hz too slow, cdiv %u; min %ld Hz\n",
++				hz, cdiv, bus_hz / 65536);
++			return -EINVAL;
++		} else if (cdiv == 65536) {
++			cdiv = 0;
++		} else if (cdiv == 1) {
++			cdiv = 2; /* 1 gets rounded down to 0; == 65536 */
++		}
++	} else {
++		cdiv = 0;
++	}
++
++	switch (bpw) {
++	case 8:
++		break;
++	case 9:
++		/* Reading in LoSSI mode is a special case. See 'BCM2835 ARM Peripherals' datasheet */
++		cs |= SPI_CS_LEN;
++		break;
++	default:
++		dev_dbg(dev, "setup: invalid bits_per_word %u (must be 8 or 9)\n",
++			bpw);
++		return -EINVAL;
++	}
++
++	if (mode & SPI_CPOL)
++		cs |= SPI_CS_CPOL;
++	if (mode & SPI_CPHA)
++		cs |= SPI_CS_CPHA;
++
++	if (!(mode & SPI_NO_CS)) {
++		if (mode & SPI_CS_HIGH) {
++			cs |= SPI_CS_CSPOL;
++			cs |= SPI_CS_CSPOL0 << csel;
++		}
++
++		cs |= csel;
++	} else {
++		cs |= SPI_CS_CS_10 | SPI_CS_CS_01;
++	}
++
++	if (state) {
++		state->cs = cs;
++		state->cdiv = cdiv;
++		dev_dbg(dev, "setup: want %d Hz; "
++			"bus_hz=%lu / cdiv=%u == %lu Hz; "
++			"mode %u: cs 0x%08X\n",
++			hz, bus_hz, cdiv, bus_hz/cdiv, mode, cs);
++	}
++
++	return 0;
++}
++
++static int bcm2708_process_transfer(struct bcm2708_spi *bs,
++		struct spi_message *msg, struct spi_transfer *xfer)
++{
++	struct spi_device *spi = msg->spi;
++	struct bcm2708_spi_state state, *stp;
++	int ret;
++	u32 cs;
++
++	if (bs->stopping)
++		return -ESHUTDOWN;
++
++	if (xfer->bits_per_word || xfer->speed_hz) {
++		ret = bcm2708_setup_state(spi->master, &spi->dev, &state,
++			xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz,
++			spi->chip_select, spi->mode,
++			xfer->bits_per_word ? xfer->bits_per_word :
++				spi->bits_per_word);
++		if (ret)
++			return ret;
++
++		stp = &state;
++	} else {
++		stp = spi->controller_state;
++	}
++
++	INIT_COMPLETION(bs->done);
++	bs->tx_buf = xfer->tx_buf;
++	bs->rx_buf = xfer->rx_buf;
++	bs->len = xfer->len;
++
++	cs = stp->cs | SPI_CS_INTR | SPI_CS_INTD | SPI_CS_TA;
++
++	bcm2708_wr(bs, SPI_CLK, stp->cdiv);
++	bcm2708_wr(bs, SPI_CS, cs);
++
++	ret = wait_for_completion_timeout(&bs->done,
++			msecs_to_jiffies(SPI_TIMEOUT_MS));
++	if (ret == 0) {
++		dev_err(&spi->dev, "transfer timed out\n");
++		return -ETIMEDOUT;
++	}
++
++	if (xfer->delay_usecs)
++		udelay(xfer->delay_usecs);
++
++	if (list_is_last(&xfer->transfer_list, &msg->transfers) ||
++			xfer->cs_change) {
++		/* clear TA and interrupt flags */
++		bcm2708_wr(bs, SPI_CS, stp->cs);
++	}
++
++	msg->actual_length += (xfer->len - bs->len);
++
++	return 0;
++}
++
++static void bcm2708_work(struct work_struct *work)
++{
++	struct bcm2708_spi *bs = container_of(work, struct bcm2708_spi, work);
++	unsigned long flags;
++	struct spi_message *msg;
++	struct spi_transfer *xfer;
++	int status = 0;
++
++	spin_lock_irqsave(&bs->lock, flags);
++	while (!list_empty(&bs->queue)) {
++		msg = list_first_entry(&bs->queue, struct spi_message, queue);
++		list_del_init(&msg->queue);
++		spin_unlock_irqrestore(&bs->lock, flags);
++
++		list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++			status = bcm2708_process_transfer(bs, msg, xfer);
++			if (status)
++				break;
++		}
++
++		msg->status = status;
++		msg->complete(msg->context);
++
++		spin_lock_irqsave(&bs->lock, flags);
++	}
++	spin_unlock_irqrestore(&bs->lock, flags);
++}
++
++static int bcm2708_spi_setup(struct spi_device *spi)
++{
++	struct bcm2708_spi *bs = spi_master_get_devdata(spi->master);
++	struct bcm2708_spi_state *state;
++	int ret;
++
++	if (bs->stopping)
++		return -ESHUTDOWN;
++
++	if (!(spi->mode & SPI_NO_CS) &&
++			(spi->chip_select > spi->master->num_chipselect)) {
++		dev_dbg(&spi->dev,
++			"setup: invalid chipselect %u (%u defined)\n",
++			spi->chip_select, spi->master->num_chipselect);
++		return -EINVAL;
++	}
++
++	state = spi->controller_state;
++	if (!state) {
++		state = kzalloc(sizeof(*state), GFP_KERNEL);
++		if (!state)
++			return -ENOMEM;
++
++		spi->controller_state = state;
++	}
++
++	ret = bcm2708_setup_state(spi->master, &spi->dev, state,
++		spi->max_speed_hz, spi->chip_select, spi->mode,
++		spi->bits_per_word);
++	if (ret < 0) {
++		kfree(state);
++		spi->controller_state = NULL;
++                return ret;
++	}
++
++	dev_dbg(&spi->dev,
++		"setup: cd %d: %d Hz, bpw %u, mode 0x%x -> CS=%08x CDIV=%04x\n",
++		spi->chip_select, spi->max_speed_hz, spi->bits_per_word,
++		spi->mode, state->cs, state->cdiv);
++
++	return 0;
++}
++
++static int bcm2708_spi_transfer(struct spi_device *spi, struct spi_message *msg)
++{
++	struct bcm2708_spi *bs = spi_master_get_devdata(spi->master);
++	struct spi_transfer *xfer;
++	int ret;
++	unsigned long flags;
++
++	if (unlikely(list_empty(&msg->transfers)))
++		return -EINVAL;
++
++	if (bs->stopping)
++		return -ESHUTDOWN;
++
++	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++		if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
++			dev_dbg(&spi->dev, "missing rx or tx buf\n");
++			return -EINVAL;
++		}
++
++		if (!xfer->bits_per_word || xfer->speed_hz)
++			continue;
++
++		ret = bcm2708_setup_state(spi->master, &spi->dev, NULL,
++			xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz,
++			spi->chip_select, spi->mode,
++			xfer->bits_per_word ? xfer->bits_per_word :
++				spi->bits_per_word);
++		if (ret)
++			return ret;
++	}
++
++	msg->status = -EINPROGRESS;
++	msg->actual_length = 0;
++
++	spin_lock_irqsave(&bs->lock, flags);
++	list_add_tail(&msg->queue, &bs->queue);
++	queue_work(bs->workq, &bs->work);
++	spin_unlock_irqrestore(&bs->lock, flags);
++
++	return 0;
++}
++
++static void bcm2708_spi_cleanup(struct spi_device *spi)
++{
++	if (spi->controller_state) {
++		kfree(spi->controller_state);
++		spi->controller_state = NULL;
++	}
++}
++
++static int bcm2708_spi_probe(struct platform_device *pdev)
++{
++	struct resource *regs;
++	int irq, err = -ENOMEM;
++	struct clk *clk;
++	struct spi_master *master;
++	struct bcm2708_spi *bs;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_err(&pdev->dev, "could not get IO memory\n");
++		return -ENXIO;
++	}
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		dev_err(&pdev->dev, "could not get IRQ\n");
++		return irq;
++	}
++
++	clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk));
++		return PTR_ERR(clk);
++	}
++
++	bcm2708_init_pinmode();
++
++	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
++	if (!master) {
++		dev_err(&pdev->dev, "spi_alloc_master() failed\n");
++		goto out_clk_put;
++	}
++
++	/* the spi->mode bits understood by this driver: */
++	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS;
++
++	master->bus_num = pdev->id;
++	master->num_chipselect = 3;
++	master->setup = bcm2708_spi_setup;
++	master->transfer = bcm2708_spi_transfer;
++	master->cleanup = bcm2708_spi_cleanup;
++	platform_set_drvdata(pdev, master);
++
++	bs = spi_master_get_devdata(master);
++
++	spin_lock_init(&bs->lock);
++	INIT_LIST_HEAD(&bs->queue);
++	init_completion(&bs->done);
++	INIT_WORK(&bs->work, bcm2708_work);
++
++	bs->base = ioremap(regs->start, resource_size(regs));
++	if (!bs->base) {
++		dev_err(&pdev->dev, "could not remap memory\n");
++		goto out_master_put;
++	}
++
++	bs->workq = create_singlethread_workqueue(dev_name(&pdev->dev));
++	if (!bs->workq) {
++		dev_err(&pdev->dev, "could not create workqueue\n");
++		goto out_iounmap;
++	}
++
++	bs->irq = irq;
++	bs->clk = clk;
++	bs->stopping = false;
++
++	err = request_irq(irq, bcm2708_spi_interrupt, 0, dev_name(&pdev->dev),
++			master);
++	if (err) {
++		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
++		goto out_workqueue;
++	}
++
++	/* initialise the hardware */
++	clk_enable(clk);
++	bcm2708_wr(bs, SPI_CS, SPI_CS_REN | SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX);
++
++	err = spi_register_master(master);
++	if (err) {
++		dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
++		goto out_free_irq;
++	}
++
++	dev_info(&pdev->dev, "SPI Controller at 0x%08lx (irq %d)\n",
++		(unsigned long)regs->start, irq);
++
++	return 0;
++
++out_free_irq:
++	free_irq(bs->irq, master);
++out_workqueue:
++	destroy_workqueue(bs->workq);
++out_iounmap:
++	iounmap(bs->base);
++out_master_put:
++	spi_master_put(master);
++out_clk_put:
++	clk_put(clk);
++	return err;
++}
++
++static int bcm2708_spi_remove(struct platform_device *pdev)
++{
++	struct spi_master *master = platform_get_drvdata(pdev);
++	struct bcm2708_spi *bs = spi_master_get_devdata(master);
++
++	/* reset the hardware and block queue progress */
++	spin_lock_irq(&bs->lock);
++	bs->stopping = true;
++	bcm2708_wr(bs, SPI_CS, SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX);
++	spin_unlock_irq(&bs->lock);
++
++	flush_work_sync(&bs->work);
++
++	clk_disable(bs->clk);
++	clk_put(bs->clk);
++	free_irq(bs->irq, master);
++	iounmap(bs->base);
++
++	spi_unregister_master(master);
++
++	return 0;
++}
++
++static struct platform_driver bcm2708_spi_driver = {
++	.driver		= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= bcm2708_spi_probe,
++	.remove		= bcm2708_spi_remove,
++};
++
++
++static int __init bcm2708_spi_init(void)
++{
++	return platform_driver_probe(&bcm2708_spi_driver, bcm2708_spi_probe);
++}
++module_init(bcm2708_spi_init);
++
++static void __exit bcm2708_spi_exit(void)
++{
++	platform_driver_unregister(&bcm2708_spi_driver);
++}
++module_exit(bcm2708_spi_exit);
++
++
++//module_platform_driver(bcm2708_spi_driver);
++
++MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2708");
++MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/target/linux/brcm2708/patches-3.10/010-bcm2835-thermal-driver.patch b/target/linux/brcm2708/patches-3.10/010-bcm2835-thermal-driver.patch
new file mode 100644
index 0000000000..80256d05d7
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/010-bcm2835-thermal-driver.patch
@@ -0,0 +1,212 @@
+diff -urN linux-3.10/drivers/thermal/bcm2835-thermal.c linux-rpi-3.10.y/drivers/thermal/bcm2835-thermal.c
+--- linux-3.10/drivers/thermal/bcm2835-thermal.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/thermal/bcm2835-thermal.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,184 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/sysfs.h>
++#include <mach/vcio.h>
++#include <linux/thermal.h>
++
++
++/* --- DEFINITIONS --- */
++#define MODULE_NAME "bcm2835_thermal"
++
++/*#define THERMAL_DEBUG_ENABLE*/
++
++#ifdef THERMAL_DEBUG_ENABLE
++#define print_debug(fmt,...) printk(KERN_INFO "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
++#else
++#define print_debug(fmt,...)
++#endif
++#define print_err(fmt,...) printk(KERN_ERR "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
++
++#define VC_TAG_GET_TEMP 0x00030006
++#define VC_TAG_GET_MAX_TEMP 0x0003000A
++
++typedef enum {
++	TEMP,
++	MAX_TEMP,
++} temp_type;
++
++/* --- STRUCTS --- */
++/* tag part of the message */
++struct vc_msg_tag {
++	uint32_t tag_id;		/* the tag ID for the temperature */
++	uint32_t buffer_size;	/* size of the buffer (should be 8) */
++	uint32_t request_code;	/* identifies message as a request (should be 0) */
++	uint32_t id;			/* extra ID field (should be 0) */
++	uint32_t val;			/* returned value of the temperature */
++};
++
++/* message structure to be sent to videocore */
++struct vc_msg {
++	uint32_t msg_size;		/* simply, sizeof(struct vc_msg) */
++	uint32_t request_code;		/* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */
++	struct vc_msg_tag tag;		/* the tag structure above to make */
++	uint32_t end_tag;		/* an end identifier, should be set to NULL */
++};
++
++struct bcm2835_thermal_data {
++	struct thermal_zone_device *thermal_dev;
++	struct vc_msg msg;
++};
++
++/* --- GLOBALS --- */
++static struct bcm2835_thermal_data bcm2835_data;
++
++/* Thermal Device Operations */
++static struct thermal_zone_device_ops ops;
++
++/* --- FUNCTIONS --- */
++
++static int bcm2835_get_temp_or_max(struct thermal_zone_device *thermal_dev, unsigned long *temp, unsigned tag_id)
++{
++	int result = -1, retry = 3;
++	print_debug("IN");
++
++	*temp = 0;
++	while (result != 0 && retry-- > 0) {
++		/* wipe all previous message data */
++		memset(&bcm2835_data.msg, 0, sizeof bcm2835_data.msg);
++
++		/* prepare message */
++		bcm2835_data.msg.msg_size = sizeof bcm2835_data.msg;
++		bcm2835_data.msg.tag.buffer_size = 8;
++		bcm2835_data.msg.tag.tag_id = tag_id;
++
++		/* send the message */
++		result = bcm_mailbox_property(&bcm2835_data.msg, sizeof bcm2835_data.msg);
++		print_debug("Got %stemperature as %u (%d,%x)\n", tag_id==VC_TAG_GET_MAX_TEMP ? "max ":"", (uint)bcm2835_data.msg.tag.val, result, bcm2835_data.msg.request_code);
++		if (!(bcm2835_data.msg.request_code & 0x80000000))
++			result = -1;
++	}
++
++	/* check if it was all ok and return the rate in milli degrees C */
++	if (result == 0)
++		*temp = (uint)bcm2835_data.msg.tag.val;
++	else
++		print_err("Failed to get temperature! (%x:%d)\n", tag_id, result);
++	print_debug("OUT");
++	return result;
++}
++
++static int bcm2835_get_temp(struct thermal_zone_device *thermal_dev, unsigned long *temp)
++{
++	return bcm2835_get_temp_or_max(thermal_dev, temp, VC_TAG_GET_TEMP);
++}
++
++static int bcm2835_get_max_temp(struct thermal_zone_device *thermal_dev, int trip_num, unsigned long *temp)
++{
++	return bcm2835_get_temp_or_max(thermal_dev, temp, VC_TAG_GET_MAX_TEMP);
++}
++
++static int bcm2835_get_trip_type(struct thermal_zone_device * thermal_dev, int trip_num, enum thermal_trip_type *trip_type)
++{
++	*trip_type = THERMAL_TRIP_HOT;
++	return 0;
++}
++
++
++static int bcm2835_get_mode(struct thermal_zone_device *thermal_dev, enum thermal_device_mode *dev_mode)
++{
++	*dev_mode = THERMAL_DEVICE_ENABLED;
++	return 0;
++}
++
++
++static int bcm2835_thermal_probe(struct platform_device *pdev)
++{
++	print_debug("IN");
++	print_debug("THERMAL Driver has been probed!");
++
++	/* check that the device isn't null!*/
++	if(pdev == NULL)
++	{
++		print_debug("Platform device is empty!");
++		return -ENODEV;
++	}
++
++	if(!(bcm2835_data.thermal_dev = thermal_zone_device_register("bcm2835_thermal",  1, 0, NULL, &ops, NULL, 0, 0)))
++	{
++		print_debug("Unable to register the thermal device!");
++		return -EFAULT;
++	}
++	return 0;
++}
++
++
++static int bcm2835_thermal_remove(struct platform_device *pdev)
++{
++	print_debug("IN");
++
++	thermal_zone_device_unregister(bcm2835_data.thermal_dev);
++
++	print_debug("OUT");
++
++	return 0;
++}
++
++static struct thermal_zone_device_ops ops  = {
++	.get_temp = bcm2835_get_temp,
++	.get_trip_temp = bcm2835_get_max_temp,
++	.get_trip_type = bcm2835_get_trip_type,
++	.get_mode = bcm2835_get_mode,
++};
++
++/* Thermal Driver */
++static struct platform_driver bcm2835_thermal_driver = {
++	.probe = bcm2835_thermal_probe,
++	.remove = bcm2835_thermal_remove,
++	.driver = {
++				.name = "bcm2835_thermal",
++				.owner = THIS_MODULE,
++			},
++};
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Dorian Peake");
++MODULE_DESCRIPTION("Thermal driver for bcm2835 chip");
++
++module_platform_driver(bcm2835_thermal_driver);
+diff -urN linux-3.10/drivers/thermal/Kconfig linux-rpi-3.10.y/drivers/thermal/Kconfig
+--- linux-3.10/drivers/thermal/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/thermal/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -169,4 +169,11 @@
+ 	  enforce idle time which results in more package C-state residency. The
+ 	  user interface is exposed via generic thermal framework.
+ 
++config THERMAL_BCM2835
++	tristate "BCM2835 Thermal Driver"
++	help
++	  This will enable temperature monitoring for the Broadcom BCM2835
++	  chip. If built as a module, it will be called 'bcm2835-thermal'.
++
+ endif
++
+diff -urN linux-3.10/drivers/thermal/Makefile linux-rpi-3.10.y/drivers/thermal/Makefile
+--- linux-3.10/drivers/thermal/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/thermal/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -23,4 +23,5 @@
+ obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
+ obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
+ obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
++obj-$(CONFIG_THERMAL_BCM2835)	+= bcm2835-thermal.o
+ 
diff --git a/target/linux/brcm2708/patches-3.10/011-bcm2835-cpufreq-driver.patch b/target/linux/brcm2708/patches-3.10/011-bcm2835-cpufreq-driver.patch
new file mode 100644
index 0000000000..9a0b10c2cb
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/011-bcm2835-cpufreq-driver.patch
@@ -0,0 +1,269 @@
+diff -urN linux-3.10/drivers/cpufreq/bcm2835-cpufreq.c linux-rpi-3.10.y/drivers/cpufreq/bcm2835-cpufreq.c
+--- linux-3.10/drivers/cpufreq/bcm2835-cpufreq.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/cpufreq/bcm2835-cpufreq.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,239 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*	
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++/*****************************************************************************
++* FILENAME: bcm2835-cpufreq.h
++* DESCRIPTION: This driver dynamically manages the CPU Frequency of the ARM
++* processor. Messages are sent to Videocore either setting or requesting the
++* frequency of the ARM in order to match an appropiate frequency to the current
++* usage of the processor. The policy which selects the frequency to use is
++* defined in the kernel .config file, but can be changed during runtime.
++*****************************************************************************/
++
++/* ---------- INCLUDES ---------- */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/cpufreq.h>
++#include <mach/vcio.h>
++
++/* ---------- DEFINES ---------- */
++/*#define CPUFREQ_DEBUG_ENABLE*/		/* enable debugging */
++#define MODULE_NAME "bcm2835-cpufreq"
++
++#define VCMSG_ID_ARM_CLOCK 0x000000003		/* Clock/Voltage ID's */
++
++/* debug printk macros */
++#ifdef CPUFREQ_DEBUG_ENABLE
++#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
++#else
++#define print_debug(fmt,...)
++#endif
++#define print_err(fmt,...) pr_err("%s:%s:%d: "fmt, MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
++#define print_info(fmt,...) pr_info("%s: "fmt, MODULE_NAME, ##__VA_ARGS__)
++
++/* tag part of the message */
++struct vc_msg_tag {
++	uint32_t tag_id;		/* the message id */
++	uint32_t buffer_size;		/* size of the buffer (which in this case is always 8 bytes) */
++	uint32_t data_size;		/* amount of data being sent or received */
++	uint32_t dev_id;		/* the ID of the clock/voltage to get or set */
++	uint32_t val;			/* the value (e.g. rate (in Hz)) to set */
++};
++
++/* message structure to be sent to videocore */
++struct vc_msg {
++	uint32_t msg_size;		/* simply, sizeof(struct vc_msg) */
++	uint32_t request_code;		/* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */
++	struct vc_msg_tag tag;		/* the tag structure above to make */
++	uint32_t end_tag;		/* an end identifier, should be set to NULL */
++};
++
++/* ---------- GLOBALS ---------- */
++static struct cpufreq_driver bcm2835_cpufreq_driver;	/* the cpufreq driver global */
++
++/*
++ ===============================================
++  clk_rate either gets or sets the clock rates.
++ ===============================================
++*/
++static uint32_t bcm2835_cpufreq_set_clock(int cur_rate, int arm_rate)
++{
++	int s, actual_rate=0;
++	struct vc_msg msg;
++	
++	/* wipe all previous message data */
++	memset(&msg, 0, sizeof msg);
++	
++	msg.msg_size = sizeof msg;
++			
++	msg.tag.tag_id = VCMSG_SET_CLOCK_RATE;
++	msg.tag.buffer_size = 8;
++	msg.tag.data_size = 8;   /* we're sending the clock ID and the new rates which is a total of 2 words */
++	msg.tag.dev_id = VCMSG_ID_ARM_CLOCK;
++	msg.tag.val = arm_rate * 1000;
++			
++	/* send the message */
++	s = bcm_mailbox_property(&msg, sizeof msg);
++	
++	/* check if it was all ok and return the rate in KHz */
++	if (s == 0 && (msg.request_code & 0x80000000))
++		actual_rate = msg.tag.val/1000;
++
++	print_debug("Setting new frequency = %d -> %d (actual %d)\n", cur_rate, arm_rate, actual_rate);	
++	return actual_rate;
++}
++
++static uint32_t bcm2835_cpufreq_get_clock(int tag)
++{
++	int s;
++	int arm_rate = 0;
++	struct vc_msg msg;
++	
++	/* wipe all previous message data */
++	memset(&msg, 0, sizeof msg);
++	
++	msg.msg_size = sizeof msg;
++	msg.tag.tag_id = tag;
++	msg.tag.buffer_size = 8;
++	msg.tag.data_size = 4; /* we're just sending the clock ID which is one word long */
++	msg.tag.dev_id = VCMSG_ID_ARM_CLOCK;
++	
++	/* send the message */
++	s = bcm_mailbox_property(&msg, sizeof msg);
++
++	/* check if it was all ok and return the rate in KHz */
++	if (s == 0 && (msg.request_code & 0x80000000))
++		arm_rate = msg.tag.val/1000;
++
++	print_debug("%s frequency = %d\n",
++		tag == VCMSG_GET_CLOCK_RATE ? "Current":
++		tag == VCMSG_GET_MIN_CLOCK ? "Min":
++		tag == VCMSG_GET_MAX_CLOCK ? "Max":
++		"Unexpected", arm_rate);
++	
++	return arm_rate;
++}
++
++/*
++ ====================================================
++  Module Initialisation registers the cpufreq driver
++ ====================================================
++*/
++static int __init bcm2835_cpufreq_module_init(void)
++{	
++	print_debug("IN\n");
++	return cpufreq_register_driver(&bcm2835_cpufreq_driver);
++}
++
++/*
++ =============
++  Module exit
++ =============
++*/
++static void __exit bcm2835_cpufreq_module_exit(void)
++{
++	print_debug("IN\n");
++	cpufreq_unregister_driver(&bcm2835_cpufreq_driver);
++	return;
++}
++
++/*
++ ==============================================================
++  Initialisation function sets up the CPU policy for first use
++ ==============================================================
++*/
++static int bcm2835_cpufreq_driver_init(struct cpufreq_policy *policy)
++{
++	/* measured value of how long it takes to change frequency */	
++	policy->cpuinfo.transition_latency = 355000; /* ns */
++
++	/* now find out what the maximum and minimum frequencies are */
++	policy->min = policy->cpuinfo.min_freq = bcm2835_cpufreq_get_clock(VCMSG_GET_MIN_CLOCK);
++	policy->max = policy->cpuinfo.max_freq = bcm2835_cpufreq_get_clock(VCMSG_GET_MAX_CLOCK);
++	policy->cur = bcm2835_cpufreq_get_clock(VCMSG_GET_CLOCK_RATE);
++	
++	print_info("min=%d max=%d cur=%d\n", policy->min, policy->max, policy->cur);
++	return 0;
++}
++
++/*
++ =================================================================================
++  Target function chooses the most appropriate frequency from the table to enable
++ =================================================================================
++*/
++
++static int bcm2835_cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation)
++{
++	unsigned int target = target_freq;
++	unsigned int cur = policy->cur;
++	print_debug("%s: min=%d max=%d cur=%d target=%d\n",policy->governor->name,policy->min,policy->max,policy->cur,target_freq);
++	
++	/* if we are above min and using ondemand, then just use max */
++	if (strcmp("ondemand", policy->governor->name)==0 && target > policy->min)
++		target = policy->max;
++	/* if the frequency is the same, just quit */
++	if (target == policy->cur)
++		return 0;
++
++	/* otherwise were good to set the clock frequency */
++	policy->cur = bcm2835_cpufreq_set_clock(policy->cur, target);
++	
++	if (!policy->cur)
++	{
++		print_err("Error occurred setting a new frequency (%d)!\n", target);
++		policy->cur = bcm2835_cpufreq_get_clock(VCMSG_GET_CLOCK_RATE);
++		return -EINVAL;
++	}
++	print_debug("Freq %d->%d (min=%d max=%d target=%d request=%d)\n", cur, policy->cur, policy->min, policy->max, target_freq, target);
++	return 0;
++}
++
++static unsigned int bcm2835_cpufreq_driver_get(unsigned int cpu)
++{
++	unsigned int actual_rate = bcm2835_cpufreq_get_clock(VCMSG_GET_CLOCK_RATE);
++	print_debug("cpu=%d\n", actual_rate);
++	return actual_rate;
++}
++
++/*
++ =================================================================================
++  Verify ensures that when a policy is changed, it is suitable for the CPU to use
++ =================================================================================
++*/
++
++static int bcm2835_cpufreq_driver_verify(struct cpufreq_policy *policy)
++{
++	print_info("switching to governor %s\n", policy->governor->name);
++	return 0;
++}
++
++
++/* the CPUFreq driver */
++static struct cpufreq_driver bcm2835_cpufreq_driver = {
++		.name   = "BCM2835 CPUFreq",
++		.owner  = THIS_MODULE,
++		.init   = bcm2835_cpufreq_driver_init,
++		.verify = bcm2835_cpufreq_driver_verify,
++		.target = bcm2835_cpufreq_driver_target,
++		.get    = bcm2835_cpufreq_driver_get
++};
++
++MODULE_AUTHOR("Dorian Peake and Dom Cobley");
++MODULE_DESCRIPTION("CPU frequency driver for BCM2835 chip");
++MODULE_LICENSE("GPL");
++
++module_init(bcm2835_cpufreq_module_init);
++module_exit(bcm2835_cpufreq_module_exit);
++
+diff -urN linux-3.10/drivers/cpufreq/Kconfig.arm linux-rpi-3.10.y/drivers/cpufreq/Kconfig.arm
+--- linux-3.10/drivers/cpufreq/Kconfig.arm	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/cpufreq/Kconfig.arm	2013-07-06 15:25:50.000000000 +0100
+@@ -150,3 +150,11 @@
+ 	default y
+ 	help
+ 	  This adds the CPUFreq driver support for SPEAr SOCs.
++
++config ARM_BCM2835_CPUFREQ
++	bool "BCM2835 Driver"
++	default y
++	help
++	  This adds the CPUFreq driver for BCM2835
++
++	  If in doubt, say N.
+diff -urN linux-3.10/drivers/cpufreq/Makefile linux-rpi-3.10.y/drivers/cpufreq/Makefile
+--- linux-3.10/drivers/cpufreq/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/cpufreq/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -72,6 +72,7 @@
+ obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
+ obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
+ obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
++obj-$(CONFIG_ARM_BCM2835_CPUFREQ)	+= bcm2835-cpufreq.o
+ 
+ ##################################################################################
+ # PowerPC platform drivers
diff --git a/target/linux/brcm2708/patches-3.10/012-bcm2708-sound-driver.patch b/target/linux/brcm2708/patches-3.10/012-bcm2708-sound-driver.patch
new file mode 100644
index 0000000000..d1f2eb4f06
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/012-bcm2708-sound-driver.patch
@@ -0,0 +1,2244 @@
+diff -urN linux-3.10/sound/arm/bcm2835.c linux-rpi-3.10.y/sound/arm/bcm2835.c
+--- linux-3.10/sound/arm/bcm2835.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,413 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*	
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/platform_device.h>
++
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++
++#include "bcm2835.h"
++
++/* module parameters (see "Module Parameters") */
++/* SNDRV_CARDS: maximum number of cards supported by this module */
++static int index[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = -1 };
++static char *id[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = NULL };
++static int enable[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = 1 };
++
++/* HACKY global pointers needed for successive probes to work : ssp
++ * But compared against the changes we will have to do in VC audio_ipc code
++ * to export 8 audio_ipc devices as a single IPC device and then monitor all
++ * four devices in a thread, this gets things done quickly and should be easier
++ * to debug if we run into issues
++ */
++
++static struct snd_card *g_card = NULL;
++static bcm2835_chip_t *g_chip = NULL;
++
++static int snd_bcm2835_free(bcm2835_chip_t * chip)
++{
++	kfree(chip);
++	return 0;
++}
++
++/* component-destructor
++ * (see "Management of Cards and Components")
++ */
++static int snd_bcm2835_dev_free(struct snd_device *device)
++{
++	return snd_bcm2835_free(device->device_data);
++}
++
++/* chip-specific constructor
++ * (see "Management of Cards and Components")
++ */
++static int snd_bcm2835_create(struct snd_card *card,
++					struct platform_device *pdev,
++					bcm2835_chip_t ** rchip)
++{
++	bcm2835_chip_t *chip;
++	int err;
++	static struct snd_device_ops ops = {
++		.dev_free = snd_bcm2835_dev_free,
++	};
++
++	*rchip = NULL;
++
++	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
++	if (chip == NULL)
++		return -ENOMEM;
++
++	chip->card = card;
++
++	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++	if (err < 0) {
++		snd_bcm2835_free(chip);
++		return err;
++	}
++
++	*rchip = chip;
++	return 0;
++}
++
++static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
++{
++	static int dev;
++	bcm2835_chip_t *chip;
++	struct snd_card *card;
++	int err;
++
++	if (dev >= MAX_SUBSTREAMS)
++		return -ENODEV;
++
++	if (!enable[dev]) {
++		dev++;
++		return -ENOENT;
++	}
++
++	if (dev > 0)
++		goto add_register_map;
++
++	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &g_card);
++	if (err < 0)
++		goto out;
++
++	snd_card_set_dev(g_card, &pdev->dev);
++	strcpy(g_card->driver, "BRCM bcm2835 ALSA Driver");
++	strcpy(g_card->shortname, "bcm2835 ALSA");
++	sprintf(g_card->longname, "%s", g_card->shortname);
++
++	err = snd_bcm2835_create(g_card, pdev, &chip);
++	if (err < 0) {
++		dev_err(&pdev->dev, "Failed to create bcm2835 chip\n");
++		goto out_bcm2835_create;
++	}
++
++	g_chip = chip;
++	err = snd_bcm2835_new_pcm(chip);
++	if (err < 0) {
++		dev_err(&pdev->dev, "Failed to create new BCM2835 pcm device\n");
++		goto out_bcm2835_new_pcm;
++	}
++
++	err = snd_bcm2835_new_ctl(chip);
++	if (err < 0) {
++		dev_err(&pdev->dev, "Failed to create new BCM2835 ctl\n");
++		goto out_bcm2835_new_ctl;
++	}
++
++add_register_map:
++	card = g_card;
++	chip = g_chip;
++
++	BUG_ON(!(card && chip));
++
++	chip->avail_substreams |= (1 << dev);
++	chip->pdev[dev] = pdev;
++
++	if (dev == 0) {
++		err = snd_card_register(card);
++		if (err < 0) {
++			dev_err(&pdev->dev,
++				"Failed to register bcm2835 ALSA card \n");
++			goto out_card_register;
++		}
++		platform_set_drvdata(pdev, card);
++		audio_info("bcm2835 ALSA card created!\n");
++	} else {
++		audio_info("bcm2835 ALSA chip created!\n");
++		platform_set_drvdata(pdev, (void *)dev);
++	}
++
++	dev++;
++
++	return 0;
++
++out_card_register:
++out_bcm2835_new_ctl:
++out_bcm2835_new_pcm:
++out_bcm2835_create:
++	BUG_ON(!g_card);
++	if (snd_card_free(g_card))
++		dev_err(&pdev->dev, "Failed to free Registered alsa card\n");
++	g_card = NULL;
++out:
++	dev = SNDRV_CARDS;	/* stop more avail_substreams from being probed */
++	dev_err(&pdev->dev, "BCM2835 ALSA Probe failed !!\n");
++	return err;
++}
++
++static int snd_bcm2835_alsa_remove(struct platform_device *pdev)
++{
++	uint32_t idx;
++	void *drv_data;
++
++	drv_data = platform_get_drvdata(pdev);
++
++	if (drv_data == (void *)g_card) {
++		/* This is the card device */
++		snd_card_free((struct snd_card *)drv_data);
++		g_card = NULL;
++		g_chip = NULL;
++	} else {
++		idx = (uint32_t) drv_data;
++		if (g_card != NULL) {
++			BUG_ON(!g_chip);
++			/* We pass chip device numbers in audio ipc devices
++			 * other than the one we registered our card with
++			 */
++			idx = (uint32_t) drv_data;
++			BUG_ON(!idx || idx > MAX_SUBSTREAMS);
++			g_chip->avail_substreams &= ~(1 << idx);
++			/* There should be atleast one substream registered
++			 * after we are done here, as it wil be removed when
++			 * the *remove* is called for the card device
++			 */
++			BUG_ON(!g_chip->avail_substreams);
++		}
++	}
++
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_bcm2835_alsa_suspend(struct platform_device *pdev,
++				    pm_message_t state)
++{
++	return 0;
++}
++
++static int snd_bcm2835_alsa_resume(struct platform_device *pdev)
++{
++	return 0;
++}
++
++#endif
++
++static struct platform_driver bcm2835_alsa0_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD0",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa1_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD1",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa2_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD2",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa3_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD3",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa4_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD4",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa5_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD5",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa6_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD6",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa7_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD7",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static int bcm2835_alsa_device_init(void)
++{
++	int err;
++	err = platform_driver_register(&bcm2835_alsa0_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto out;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa1_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_0;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa2_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_1;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa3_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_2;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa4_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_3;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa5_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_4;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa6_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_5;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa7_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_6;
++	}
++
++	return 0;
++
++unregister_6:
++	platform_driver_unregister(&bcm2835_alsa6_driver);
++unregister_5:
++	platform_driver_unregister(&bcm2835_alsa5_driver);
++unregister_4:
++	platform_driver_unregister(&bcm2835_alsa4_driver);
++unregister_3:
++	platform_driver_unregister(&bcm2835_alsa3_driver);
++unregister_2:
++	platform_driver_unregister(&bcm2835_alsa2_driver);
++unregister_1:
++	platform_driver_unregister(&bcm2835_alsa1_driver);
++unregister_0:
++	platform_driver_unregister(&bcm2835_alsa0_driver);
++out:
++	return err;
++}
++
++static void bcm2835_alsa_device_exit(void)
++{
++	platform_driver_unregister(&bcm2835_alsa0_driver);
++	platform_driver_unregister(&bcm2835_alsa1_driver);
++	platform_driver_unregister(&bcm2835_alsa2_driver);
++	platform_driver_unregister(&bcm2835_alsa3_driver);
++	platform_driver_unregister(&bcm2835_alsa4_driver);
++	platform_driver_unregister(&bcm2835_alsa5_driver);
++	platform_driver_unregister(&bcm2835_alsa6_driver);
++	platform_driver_unregister(&bcm2835_alsa7_driver);
++}
++
++late_initcall(bcm2835_alsa_device_init);
++module_exit(bcm2835_alsa_device_exit);
++
++MODULE_AUTHOR("Dom Cobley");
++MODULE_DESCRIPTION("Alsa driver for BCM2835 chip");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:bcm2835_alsa");
+diff -urN linux-3.10/sound/arm/bcm2835-ctl.c linux-rpi-3.10.y/sound/arm/bcm2835-ctl.c
+--- linux-3.10/sound/arm/bcm2835-ctl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835-ctl.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,200 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*	
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/jiffies.h>
++#include <linux/slab.h>
++#include <linux/time.h>
++#include <linux/wait.h>
++#include <linux/delay.h>
++#include <linux/moduleparam.h>
++#include <linux/sched.h>
++
++#include <sound/core.h>
++#include <sound/control.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/rawmidi.h>
++#include <sound/initval.h>
++#include <sound/tlv.h>
++
++#include "bcm2835.h"
++
++/* volume maximum and minimum in terms of 0.01dB */
++#define CTRL_VOL_MAX 400
++#define CTRL_VOL_MIN -10239 /* originally -10240 */
++
++
++static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_info *uinfo)
++{
++	audio_info(" ... IN\n");
++	if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) {
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++		uinfo->count = 1;
++		uinfo->value.integer.min = CTRL_VOL_MIN;
++		uinfo->value.integer.max = CTRL_VOL_MAX;      /* 2303 */
++	} else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++		uinfo->count = 1;
++		uinfo->value.integer.min = 0;
++		uinfo->value.integer.max = 1;
++	} else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) {
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++		uinfo->count = 1;
++		uinfo->value.integer.min = 0;
++		uinfo->value.integer.max = AUDIO_DEST_MAX-1;
++	}
++	audio_info(" ... OUT\n");
++	return 0;
++}
++
++/* toggles mute on or off depending on the value of nmute, and returns
++ * 1 if the mute value was changed, otherwise 0
++ */
++static int toggle_mute(struct bcm2835_chip *chip, int nmute)
++{
++	/* if settings are ok, just return 0 */
++	if(chip->mute == nmute)
++		return 0;
++
++	/* if the sound is muted then we need to unmute */
++	if(chip->mute == CTRL_VOL_MUTE)
++	{
++		chip->volume = chip->old_volume; /* copy the old volume back */
++		audio_info("Unmuting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume);
++	}
++	else /* otherwise we mute */
++	{
++		chip->old_volume = chip->volume;
++		chip->volume = 26214; /* set volume to minimum level AKA mute */
++		audio_info("Muting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume);
++	}
++
++	chip->mute = nmute;
++	return 1;
++}
++
++static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol,
++			       struct snd_ctl_elem_value *ucontrol)
++{
++	struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
++
++	BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK));
++
++	if (kcontrol->private_value == PCM_PLAYBACK_VOLUME)
++		ucontrol->value.integer.value[0] = chip2alsa(chip->volume);
++	else if (kcontrol->private_value == PCM_PLAYBACK_MUTE)
++		ucontrol->value.integer.value[0] = chip->mute;
++	else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE)
++		ucontrol->value.integer.value[0] = chip->dest;
++
++	return 0;
++}
++
++static int snd_bcm2835_ctl_put(struct snd_kcontrol *kcontrol,
++			       struct snd_ctl_elem_value *ucontrol)
++{
++	struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
++	int changed = 0;
++
++	if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) {
++		audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]);
++		if (chip->mute == CTRL_VOL_MUTE) {
++			/* changed = toggle_mute(chip, CTRL_VOL_UNMUTE); */
++			return 1; /* should return 0 to signify no change but the mixer takes this as the opposite sign (no idea why) */
++		}
++		if (changed
++		    || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) {
++
++			chip->volume = alsa2chip(ucontrol->value.integer.value[0]);
++			changed = 1;
++		}
++
++	} else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
++		/* Now implemented */
++		audio_info(" Mute attempted\n");
++		changed = toggle_mute(chip, ucontrol->value.integer.value[0]);
++
++	} else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) {
++		if (ucontrol->value.integer.value[0] != chip->dest) {
++			chip->dest = ucontrol->value.integer.value[0];
++			changed = 1;
++		}
++	}
++
++	if (changed) {
++		if (bcm2835_audio_set_ctls(chip))
++			printk(KERN_ERR "Failed to set ALSA controls..\n");
++	}
++
++	return changed;
++}
++
++static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, CTRL_VOL_MIN, 1, 1);
++
++static struct snd_kcontrol_new snd_bcm2835_ctl[] = {
++	{
++	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++	 .name = "PCM Playback Volume",
++	 .index = 0,
++	 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,
++	 .private_value = PCM_PLAYBACK_VOLUME,
++	 .info = snd_bcm2835_ctl_info,
++	 .get = snd_bcm2835_ctl_get,
++	 .put = snd_bcm2835_ctl_put,
++	 .count = 1,
++	 .tlv = {.p = snd_bcm2835_db_scale}
++	},
++	{
++	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++	 .name = "PCM Playback Switch",
++	 .index = 0,
++	 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
++	 .private_value = PCM_PLAYBACK_MUTE,
++	 .info = snd_bcm2835_ctl_info,
++	 .get = snd_bcm2835_ctl_get,
++	 .put = snd_bcm2835_ctl_put,
++	 .count = 1,
++	 },
++	{
++	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++	 .name = "PCM Playback Route",
++	 .index = 0,
++	 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
++	 .private_value = PCM_PLAYBACK_DEVICE,
++	 .info = snd_bcm2835_ctl_info,
++	 .get = snd_bcm2835_ctl_get,
++	 .put = snd_bcm2835_ctl_put,
++	 .count = 1,
++	},
++};
++
++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip)
++{
++	int err;
++	unsigned int idx;
++
++	strcpy(chip->card->mixername, "Broadcom Mixer");
++	for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) {
++		err =
++		    snd_ctl_add(chip->card,
++				snd_ctl_new1(&snd_bcm2835_ctl[idx], chip));
++		if (err < 0)
++			return err;
++	}
++	return 0;
++}
+diff -urN linux-3.10/sound/arm/bcm2835.h linux-rpi-3.10.y/sound/arm/bcm2835.h
+--- linux-3.10/sound/arm/bcm2835.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,157 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*	
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#ifndef __SOUND_ARM_BCM2835_H
++#define __SOUND_ARM_BCM2835_H
++
++#include <linux/device.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/wait.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/pcm-indirect.h>
++#include <linux/workqueue.h>
++
++/*
++#define AUDIO_DEBUG_ENABLE
++#define AUDIO_VERBOSE_DEBUG_ENABLE
++*/
++
++/* Debug macros */
++
++#ifdef AUDIO_DEBUG_ENABLE
++#ifdef AUDIO_VERBOSE_DEBUG_ENABLE
++
++#define audio_debug(fmt, arg...)	\
++	printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define audio_info(fmt, arg...)	\
++	printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#else
++
++#define audio_debug(fmt, arg...)
++
++#define audio_info(fmt, arg...)
++
++#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */
++
++#else
++
++#define audio_debug(fmt, arg...)
++
++#define audio_info(fmt, arg...)
++
++#endif /* AUDIO_DEBUG_ENABLE */
++
++#define audio_error(fmt, arg...)	\
++	printk(KERN_ERR"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define audio_warning(fmt, arg...)	\
++	printk(KERN_WARNING"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define audio_alert(fmt, arg...)	\
++	printk(KERN_ALERT"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define MAX_SUBSTREAMS			(8)
++#define AVAIL_SUBSTREAMS_MASK		(0xff)
++enum {
++	CTRL_VOL_MUTE,
++	CTRL_VOL_UNMUTE
++};
++
++/* macros for alsa2chip and chip2alsa, instead of functions */
++
++#define alsa2chip(vol) (uint)(-((vol << 8) / 100))	/* convert alsa to chip volume (defined as macro rather than function call) */
++#define chip2alsa(vol) -((vol * 100) >> 8)			/* convert chip to alsa volume */
++
++/* Some constants for values .. */
++typedef enum {
++	AUDIO_DEST_AUTO = 0,
++	AUDIO_DEST_HEADPHONES = 1,
++	AUDIO_DEST_HDMI = 2,
++	AUDIO_DEST_MAX,
++} SND_BCM2835_ROUTE_T;
++
++typedef enum {
++	PCM_PLAYBACK_VOLUME,
++	PCM_PLAYBACK_MUTE,
++	PCM_PLAYBACK_DEVICE,
++} SND_BCM2835_CTRL_T;
++
++/* definition of the chip-specific record */
++typedef struct bcm2835_chip {
++	struct snd_card *card;
++	struct snd_pcm *pcm;
++	/* Bitmat for valid reg_base and irq numbers */
++	uint32_t avail_substreams;
++	struct platform_device *pdev[MAX_SUBSTREAMS];
++	struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS];
++
++	int volume;
++	int old_volume; /* stores the volume value whist muted */
++	int dest;
++	int mute;
++} bcm2835_chip_t;
++
++typedef struct bcm2835_alsa_stream {
++	bcm2835_chip_t *chip;
++	struct snd_pcm_substream *substream;
++	struct snd_pcm_indirect pcm_indirect;
++
++	struct semaphore buffers_update_sem;
++	struct semaphore control_sem;
++	spinlock_t lock;
++	volatile uint32_t control;
++	volatile uint32_t status;
++
++	int open;
++	int running;
++	int draining;
++
++	unsigned int pos;
++	unsigned int buffer_size;
++	unsigned int period_size;
++
++	uint32_t enable_fifo_irq;
++	irq_handler_t fifo_irq_handler;
++
++	atomic_t retrieved;
++	struct opaque_AUDIO_INSTANCE_T *instance;
++	struct workqueue_struct *my_wq;
++	int idx;
++} bcm2835_alsa_stream_t;
++
++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip);
++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip);
++
++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream,
++			     uint32_t channels, uint32_t samplerate,
++			     uint32_t bps);
++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip);
++int bcm2835_audio_write(bcm2835_alsa_stream_t * alsa_stream, uint32_t count,
++			void *src);
++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream);
++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream);
++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream);
++
++#endif /* __SOUND_ARM_BCM2835_H */
+diff -urN linux-3.10/sound/arm/bcm2835-pcm.c linux-rpi-3.10.y/sound/arm/bcm2835-pcm.c
+--- linux-3.10/sound/arm/bcm2835-pcm.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835-pcm.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,426 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*	
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++
++#include "bcm2835.h"
++
++/* hardware definition */
++static struct snd_pcm_hardware snd_bcm2835_playback_hw = {
++	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
++		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
++	.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
++	.rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000,
++	.rate_min = 8000,
++	.rate_max = 48000,
++	.channels_min = 1,
++	.channels_max = 2,
++	.buffer_bytes_max = 128 * 1024,
++	.period_bytes_min =   1 * 1024,
++	.period_bytes_max = 128 * 1024,
++	.periods_min = 1,
++	.periods_max = 128,
++};
++
++static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime)
++{
++	audio_info("Freeing up alsa stream here ..\n");
++	if (runtime->private_data)
++		kfree(runtime->private_data);
++	runtime->private_data = NULL;
++}
++
++static irqreturn_t bcm2835_playback_fifo_irq(int irq, void *dev_id)
++{
++	bcm2835_alsa_stream_t *alsa_stream = (bcm2835_alsa_stream_t *) dev_id;
++	uint32_t consumed = 0;
++	int new_period = 0;
++
++	audio_info(" .. IN\n");
++
++	audio_info("alsa_stream=%p substream=%p\n", alsa_stream,
++		   alsa_stream ? alsa_stream->substream : 0);
++
++	if (alsa_stream->open)
++		consumed = bcm2835_audio_retrieve_buffers(alsa_stream);
++
++	/* We get called only if playback was triggered, So, the number of buffers we retrieve in
++	 * each iteration are the buffers that have been played out already
++	 */
++
++	if (alsa_stream->period_size) {
++		if ((alsa_stream->pos / alsa_stream->period_size) !=
++		    ((alsa_stream->pos + consumed) / alsa_stream->period_size))
++			new_period = 1;
++	}
++	audio_debug("updating pos cur: %d + %d max:%d period_bytes:%d, hw_ptr: %d new_period:%d\n",
++		      alsa_stream->pos,
++		      consumed,
++		      alsa_stream->buffer_size,
++			  (int)(alsa_stream->period_size*alsa_stream->substream->runtime->periods),
++			  frames_to_bytes(alsa_stream->substream->runtime, alsa_stream->substream->runtime->status->hw_ptr),
++			  new_period);
++	if (alsa_stream->buffer_size) {
++		alsa_stream->pos += consumed &~ (1<<30);
++		alsa_stream->pos %= alsa_stream->buffer_size;
++	}
++
++	if (alsa_stream->substream) {
++		if (new_period)
++			snd_pcm_period_elapsed(alsa_stream->substream);
++	} else {
++		audio_warning(" unexpected NULL substream\n");
++	}
++	audio_info(" .. OUT\n");
++
++	return IRQ_HANDLED;
++}
++
++/* open callback */
++static int snd_bcm2835_playback_open(struct snd_pcm_substream *substream)
++{
++	bcm2835_chip_t *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream;
++	int idx;
++	int err;
++
++	audio_info(" .. IN (%d)\n", substream->number);
++
++	audio_info("Alsa open (%d)\n", substream->number);
++	idx = substream->number;
++
++	if (idx > MAX_SUBSTREAMS) {
++		audio_error
++		    ("substream(%d) device doesn't exist max(%d) substreams allowed\n",
++		     idx, MAX_SUBSTREAMS);
++		err = -ENODEV;
++		goto out;
++	}
++
++	/* Check if we are ready */
++	if (!(chip->avail_substreams & (1 << idx))) {
++		/* We are not ready yet */
++		audio_error("substream(%d) device is not ready yet\n", idx);
++		err = -EAGAIN;
++		goto out;
++	}
++
++	alsa_stream = kzalloc(sizeof(bcm2835_alsa_stream_t), GFP_KERNEL);
++	if (alsa_stream == NULL) {
++		return -ENOMEM;
++	}
++
++	/* Initialise alsa_stream */
++	alsa_stream->chip = chip;
++	alsa_stream->substream = substream;
++	alsa_stream->idx = idx;
++	chip->alsa_stream[idx] = alsa_stream;
++
++	sema_init(&alsa_stream->buffers_update_sem, 0);
++	sema_init(&alsa_stream->control_sem, 0);
++	spin_lock_init(&alsa_stream->lock);
++
++	/* Enabled in start trigger, called on each "fifo irq" after that */
++	alsa_stream->enable_fifo_irq = 0;
++	alsa_stream->fifo_irq_handler = bcm2835_playback_fifo_irq;
++
++	runtime->private_data = alsa_stream;
++	runtime->private_free = snd_bcm2835_playback_free;
++	runtime->hw = snd_bcm2835_playback_hw;
++	/* minimum 16 bytes alignment (for vchiq bulk transfers) */
++	snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
++				   16);
++
++	err = bcm2835_audio_open(alsa_stream);
++	if (err != 0) {
++		kfree(alsa_stream);
++		return err;
++	}
++
++	alsa_stream->open = 1;
++	alsa_stream->draining = 1;
++
++out:
++	audio_info(" .. OUT =%d\n", err);
++
++	return err;
++}
++
++/* close callback */
++static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream)
++{
++	/* the hardware-specific codes will be here */
++
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++
++	audio_info(" .. IN\n");
++	audio_info("Alsa close\n");
++
++	/*
++	 * Call stop if it's still running. This happens when app
++	 * is force killed and we don't get a stop trigger.
++	 */
++	if (alsa_stream->running) {
++		int err;
++		err = bcm2835_audio_stop(alsa_stream);
++		alsa_stream->running = 0;
++		if (err != 0)
++			audio_error(" Failed to STOP alsa device\n");
++	}
++
++	alsa_stream->period_size = 0;
++	alsa_stream->buffer_size = 0;
++
++	if (alsa_stream->open) {
++		alsa_stream->open = 0;
++		bcm2835_audio_close(alsa_stream);
++	}
++	if (alsa_stream->chip)
++		alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL;
++	/*
++	 * Do not free up alsa_stream here, it will be freed up by
++	 * runtime->private_free callback we registered in *_open above
++	 */
++
++	audio_info(" .. OUT\n");
++
++	return 0;
++}
++
++/* hw_params callback */
++static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream,
++				     struct snd_pcm_hw_params *params)
++{
++	int err;
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream =
++	    (bcm2835_alsa_stream_t *) runtime->private_data;
++
++	audio_info(" .. IN\n");
++
++	err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
++	if (err < 0) {
++		audio_error
++		    (" pcm_lib_malloc failed to allocated pages for buffers\n");
++		return err;
++	}
++
++	err = bcm2835_audio_set_params(alsa_stream, params_channels(params),
++				       params_rate(params),
++				       snd_pcm_format_width(params_format
++							    (params)));
++	if (err < 0) {
++		audio_error(" error setting hw params\n");
++	}
++
++	bcm2835_audio_setup(alsa_stream);
++
++	/* in preparation of the stream, set the controls (volume level) of the stream */
++	bcm2835_audio_set_ctls(alsa_stream->chip);
++
++	audio_info(" .. OUT\n");
++
++	return err;
++}
++
++/* hw_free callback */
++static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++	audio_info(" .. IN\n");
++	return snd_pcm_lib_free_pages(substream);
++}
++
++/* prepare callback */
++static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++
++	audio_info(" .. IN\n");
++
++	memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect));
++
++	alsa_stream->pcm_indirect.hw_buffer_size =
++	alsa_stream->pcm_indirect.sw_buffer_size =
++		snd_pcm_lib_buffer_bytes(substream);
++
++	alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream);
++	alsa_stream->period_size = snd_pcm_lib_period_bytes(substream);
++	alsa_stream->pos = 0;
++
++	audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n",
++		      alsa_stream->buffer_size, alsa_stream->period_size,
++		      alsa_stream->pos, runtime->frame_bits);
++
++	audio_info(" .. OUT\n");
++	return 0;
++}
++
++static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream,
++				    struct snd_pcm_indirect *rec, size_t bytes)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++	void *src = (void *)(substream->runtime->dma_area + rec->sw_data);
++	int err;
++
++	err = bcm2835_audio_write(alsa_stream, bytes, src);
++	if (err)
++		audio_error(" Failed to transfer to alsa device (%d)\n", err);
++
++}
++
++static int snd_bcm2835_pcm_ack(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++	struct snd_pcm_indirect *pcm_indirect = &alsa_stream->pcm_indirect;
++
++	pcm_indirect->hw_queue_size = runtime->hw.buffer_bytes_max;
++	snd_pcm_indirect_playback_transfer(substream, pcm_indirect,
++					   snd_bcm2835_pcm_transfer);
++	return 0;
++}
++
++/* trigger callback */
++static int snd_bcm2835_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++	int err = 0;
++
++	audio_info(" .. IN\n");
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++		audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n",
++			      alsa_stream->running);
++		if (!alsa_stream->running) {
++			err = bcm2835_audio_start(alsa_stream);
++			if (err == 0) {
++				alsa_stream->pcm_indirect.hw_io =
++				alsa_stream->pcm_indirect.hw_data =
++					bytes_to_frames(runtime,
++							alsa_stream->pos);
++				substream->ops->ack(substream);
++				alsa_stream->running = 1;
++				alsa_stream->draining = 1;
++			} else {
++				audio_error(" Failed to START alsa device (%d)\n", err);
++			}
++		}
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++		audio_debug
++		    ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n",
++			     alsa_stream->running, runtime->status->state == SNDRV_PCM_STATE_DRAINING);
++		if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
++			audio_info("DRAINING\n");
++			alsa_stream->draining = 1;
++		} else {
++			audio_info("DROPPING\n");
++			alsa_stream->draining = 0;
++		}
++		if (alsa_stream->running) {
++			err = bcm2835_audio_stop(alsa_stream);
++			if (err != 0)
++				audio_error(" Failed to STOP alsa device (%d)\n", err);
++			alsa_stream->running = 0;
++		}
++		break;
++	default:
++		err = -EINVAL;
++	}
++
++	audio_info(" .. OUT\n");
++	return err;
++}
++
++/* pointer callback */
++static snd_pcm_uframes_t
++snd_bcm2835_pcm_pointer(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++
++	audio_info(" .. IN\n");
++
++	audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0,
++		      frames_to_bytes(runtime, runtime->status->hw_ptr),
++		      frames_to_bytes(runtime, runtime->control->appl_ptr),
++		      alsa_stream->pos);
++
++	audio_info(" .. OUT\n");
++	return snd_pcm_indirect_playback_pointer(substream,
++						 &alsa_stream->pcm_indirect,
++						 alsa_stream->pos);
++}
++
++static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream,
++				     unsigned int cmd, void *arg)
++{
++	int ret = snd_pcm_lib_ioctl(substream, cmd, arg);
++	audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream,
++		    cmd, arg, arg ? *(unsigned *)arg : 0, ret);
++	return ret;
++}
++
++/* operators */
++static struct snd_pcm_ops snd_bcm2835_playback_ops = {
++	.open = snd_bcm2835_playback_open,
++	.close = snd_bcm2835_playback_close,
++	.ioctl = snd_bcm2835_pcm_lib_ioctl,
++	.hw_params = snd_bcm2835_pcm_hw_params,
++	.hw_free = snd_bcm2835_pcm_hw_free,
++	.prepare = snd_bcm2835_pcm_prepare,
++	.trigger = snd_bcm2835_pcm_trigger,
++	.pointer = snd_bcm2835_pcm_pointer,
++	.ack = snd_bcm2835_pcm_ack,
++};
++
++/* create a pcm device */
++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip)
++{
++	struct snd_pcm *pcm;
++	int err;
++
++	audio_info(" .. IN\n");
++	err =
++	    snd_pcm_new(chip->card, "bcm2835 ALSA", 0, MAX_SUBSTREAMS, 0, &pcm);
++	if (err < 0)
++		return err;
++	pcm->private_data = chip;
++	strcpy(pcm->name, "bcm2835 ALSA");
++	chip->pcm = pcm;
++	chip->dest = AUDIO_DEST_AUTO;
++	chip->volume = alsa2chip(0);
++	chip->mute = CTRL_VOL_UNMUTE;	/*disable mute on startup */
++	/* set operators */
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++			&snd_bcm2835_playback_ops);
++
++	/* pre-allocation of buffers */
++	/* NOTE: this may fail */
++	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
++					      snd_dma_continuous_data
++					      (GFP_KERNEL), 64 * 1024,
++					      64 * 1024);
++
++	audio_info(" .. OUT\n");
++
++	return 0;
++}
+diff -urN linux-3.10/sound/arm/bcm2835-vchiq.c linux-rpi-3.10.y/sound/arm/bcm2835-vchiq.c
+--- linux-3.10/sound/arm/bcm2835-vchiq.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/bcm2835-vchiq.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,879 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*	
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/device.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include <linux/fs.h>
++#include <linux/file.h>
++#include <linux/mm.h>
++#include <linux/syscalls.h>
++#include <asm/uaccess.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/atomic.h>
++#include <linux/module.h>
++#include <linux/completion.h>
++
++#include "bcm2835.h"
++
++/* ---- Include Files -------------------------------------------------------- */
++
++#include "interface/vchi/vchi.h"
++#include "vc_vchi_audioserv_defs.h"
++
++/* ---- Private Constants and Types ------------------------------------------ */
++
++#define BCM2835_AUDIO_STOP           0
++#define BCM2835_AUDIO_START          1
++#define BCM2835_AUDIO_WRITE          2
++
++/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */
++#ifdef AUDIO_DEBUG_ENABLE
++	#define LOG_ERR( fmt, arg... )   pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg)
++	#define LOG_WARN( fmt, arg... )  pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
++	#define LOG_INFO( fmt, arg... )  pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
++	#define LOG_DBG( fmt, arg... )   pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
++#else
++	#define LOG_ERR( fmt, arg... )   pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg)
++	#define LOG_WARN( fmt, arg... )
++	#define LOG_INFO( fmt, arg... )
++	#define LOG_DBG( fmt, arg... )
++#endif
++
++typedef struct opaque_AUDIO_INSTANCE_T {
++	uint32_t num_connections;
++	VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS];
++	struct completion msg_avail_comp;
++	struct mutex vchi_mutex;
++	bcm2835_alsa_stream_t *alsa_stream;
++	int32_t result;
++	short peer_version;
++} AUDIO_INSTANCE_T;
++
++bool force_bulk = false;
++
++/* ---- Private Variables ---------------------------------------------------- */
++
++/* ---- Private Function Prototypes ------------------------------------------ */
++
++/* ---- Private Functions ---------------------------------------------------- */
++
++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream);
++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream);
++static int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream,
++				      uint32_t count, void *src);
++
++typedef struct {
++	struct work_struct my_work;
++	bcm2835_alsa_stream_t *alsa_stream;
++	int cmd;
++	void *src;
++	uint32_t count;
++} my_work_t;
++
++static void my_wq_function(struct work_struct *work)
++{
++	my_work_t *w = (my_work_t *) work;
++	int ret = -9;
++	LOG_DBG(" .. IN %p:%d\n", w->alsa_stream, w->cmd);
++	switch (w->cmd) {
++	case BCM2835_AUDIO_START:
++		ret = bcm2835_audio_start_worker(w->alsa_stream);
++		break;
++	case BCM2835_AUDIO_STOP:
++		ret = bcm2835_audio_stop_worker(w->alsa_stream);
++		break;
++	case BCM2835_AUDIO_WRITE:
++		ret = bcm2835_audio_write_worker(w->alsa_stream, w->count,
++						 w->src);
++		break;
++	default:
++		LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->cmd);
++		break;
++	}
++	kfree((void *)work);
++	LOG_DBG(" .. OUT %d\n", ret);
++}
++
++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream)
++{
++	int ret = -1;
++	LOG_DBG(" .. IN\n");
++	if (alsa_stream->my_wq) {
++		my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC);
++		/*--- Queue some work (item 1) ---*/
++		if (work) {
++			INIT_WORK((struct work_struct *)work, my_wq_function);
++			work->alsa_stream = alsa_stream;
++			work->cmd = BCM2835_AUDIO_START;
++			if (queue_work
++			    (alsa_stream->my_wq, (struct work_struct *)work))
++				ret = 0;
++		} else
++			LOG_ERR(" .. Error: NULL work kmalloc\n");
++	}
++	LOG_DBG(" .. OUT %d\n", ret);
++	return ret;
++}
++
++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream)
++{
++	int ret = -1;
++	LOG_DBG(" .. IN\n");
++	if (alsa_stream->my_wq) {
++		my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC);
++		 /*--- Queue some work (item 1) ---*/
++		if (work) {
++			INIT_WORK((struct work_struct *)work, my_wq_function);
++			work->alsa_stream = alsa_stream;
++			work->cmd = BCM2835_AUDIO_STOP;
++			if (queue_work
++			    (alsa_stream->my_wq, (struct work_struct *)work))
++				ret = 0;
++		} else
++			LOG_ERR(" .. Error: NULL work kmalloc\n");
++	}
++	LOG_DBG(" .. OUT %d\n", ret);
++	return ret;
++}
++
++int bcm2835_audio_write(bcm2835_alsa_stream_t *alsa_stream,
++			uint32_t count, void *src)
++{
++	int ret = -1;
++	LOG_DBG(" .. IN\n");
++	if (alsa_stream->my_wq) {
++		my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC);
++		 /*--- Queue some work (item 1) ---*/
++		if (work) {
++			INIT_WORK((struct work_struct *)work, my_wq_function);
++			work->alsa_stream = alsa_stream;
++			work->cmd = BCM2835_AUDIO_WRITE;
++			work->src = src;
++			work->count = count;
++			if (queue_work
++			    (alsa_stream->my_wq, (struct work_struct *)work))
++				ret = 0;
++		} else
++			LOG_ERR(" .. Error: NULL work kmalloc\n");
++	}
++	LOG_DBG(" .. OUT %d\n", ret);
++	return ret;
++}
++
++void my_workqueue_init(bcm2835_alsa_stream_t * alsa_stream)
++{
++	alsa_stream->my_wq = create_workqueue("my_queue");
++	return;
++}
++
++void my_workqueue_quit(bcm2835_alsa_stream_t * alsa_stream)
++{
++	if (alsa_stream->my_wq) {
++		flush_workqueue(alsa_stream->my_wq);
++		destroy_workqueue(alsa_stream->my_wq);
++		alsa_stream->my_wq = NULL;
++	}
++	return;
++}
++
++static void audio_vchi_callback(void *param,
++				const VCHI_CALLBACK_REASON_T reason,
++				void *msg_handle)
++{
++	AUDIO_INSTANCE_T *instance = (AUDIO_INSTANCE_T *) param;
++	int32_t status;
++	int32_t msg_len;
++	VC_AUDIO_MSG_T m;
++	bcm2835_alsa_stream_t *alsa_stream = 0;
++	LOG_DBG(" .. IN instance=%p, param=%p, reason=%d, handle=%p\n",
++		instance, param, reason, msg_handle);
++
++	if (!instance || reason != VCHI_CALLBACK_MSG_AVAILABLE) {
++		return;
++	}
++	alsa_stream = instance->alsa_stream;
++	status = vchi_msg_dequeue(instance->vchi_handle[0],
++				  &m, sizeof m, &msg_len, VCHI_FLAGS_NONE);
++	if (m.type == VC_AUDIO_MSG_TYPE_RESULT) {
++		LOG_DBG
++		    (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n",
++		     instance, m.u.result.success);
++		instance->result = m.u.result.success;
++		complete(&instance->msg_avail_comp);
++	} else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) {
++		irq_handler_t callback = (irq_handler_t) m.u.complete.callback;
++		LOG_DBG
++		    (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n",
++		     instance, m.u.complete.count);
++		if (alsa_stream && callback) {
++			atomic_add(m.u.complete.count, &alsa_stream->retrieved);
++			callback(0, alsa_stream);
++		} else {
++			LOG_DBG(" .. unexpected alsa_stream=%p, callback=%p\n",
++				alsa_stream, callback);
++		}
++	} else {
++		LOG_DBG(" .. unexpected m.type=%d\n", m.type);
++	}
++	LOG_DBG(" .. OUT\n");
++}
++
++static AUDIO_INSTANCE_T *vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance,
++					    VCHI_CONNECTION_T **
++					    vchi_connections,
++					    uint32_t num_connections)
++{
++	uint32_t i;
++	AUDIO_INSTANCE_T *instance;
++	int status;
++
++	LOG_DBG("%s: start", __func__);
++
++	if (num_connections > VCHI_MAX_NUM_CONNECTIONS) {
++		LOG_ERR("%s: unsupported number of connections %u (max=%u)\n",
++			__func__, num_connections, VCHI_MAX_NUM_CONNECTIONS);
++
++		return NULL;
++	}
++	/* Allocate memory for this instance */
++	instance = kmalloc(sizeof(*instance), GFP_KERNEL);
++
++	memset(instance, 0, sizeof(*instance));
++	instance->num_connections = num_connections;
++
++	/* Create a lock for exclusive, serialized VCHI connection access */
++	mutex_init(&instance->vchi_mutex);
++	/* Open the VCHI service connections */
++	for (i = 0; i < num_connections; i++) {
++		SERVICE_CREATION_T params = {
++			VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER),
++			VC_AUDIO_SERVER_NAME,	// 4cc service code
++			vchi_connections[i],	// passed in fn pointers
++			0,	// rx fifo size (unused)
++			0,	// tx fifo size (unused)
++			audio_vchi_callback,	// service callback
++			instance,	// service callback parameter
++			1,	//TODO: remove VCOS_FALSE,   // unaligned bulk recieves
++			1,	//TODO: remove VCOS_FALSE,   // unaligned bulk transmits
++			0	// want crc check on bulk transfers
++		};
++
++		status = vchi_service_open(vchi_instance, &params,
++					   &instance->vchi_handle[i]);
++		if (status) {
++			LOG_ERR
++			    ("%s: failed to open VCHI service connection (status=%d)\n",
++			     __func__, status);
++
++			goto err_close_services;
++		}
++		/* Finished with the service for now */
++		vchi_service_release(instance->vchi_handle[i]);
++	}
++
++	return instance;
++
++err_close_services:
++	for (i = 0; i < instance->num_connections; i++) {
++		vchi_service_close(instance->vchi_handle[i]);
++	}
++
++	kfree(instance);
++
++	return NULL;
++}
++
++static int32_t vc_vchi_audio_deinit(AUDIO_INSTANCE_T * instance)
++{
++	uint32_t i;
++
++	LOG_DBG(" .. IN\n");
++
++	if (instance == NULL) {
++		LOG_ERR("%s: invalid handle %p\n", __func__, instance);
++
++		return -1;
++	}
++
++	LOG_DBG(" .. about to lock (%d)\n", instance->num_connections);
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++
++	/* Close all VCHI service connections */
++	for (i = 0; i < instance->num_connections; i++) {
++		int32_t success;
++		LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]);
++		vchi_service_use(instance->vchi_handle[i]);
++
++		success = vchi_service_close(instance->vchi_handle[i]);
++		if (success != 0) {
++			LOG_ERR
++			    ("%s: failed to close VCHI service connection (status=%d)\n",
++			     __func__, success);
++		}
++	}
++
++	mutex_unlock(&instance->vchi_mutex);
++
++	kfree(instance);
++
++	LOG_DBG(" .. OUT\n");
++
++	return 0;
++}
++
++static int bcm2835_audio_open_connection(bcm2835_alsa_stream_t * alsa_stream)
++{
++	static VCHI_INSTANCE_T vchi_instance;
++	static VCHI_CONNECTION_T *vchi_connection;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	LOG_INFO("%s: start", __func__);
++	//BUG_ON(instance);
++	if (instance) {
++		LOG_ERR("%s: VCHI instance already open (%p)\n",
++			__func__, instance);
++		instance->alsa_stream = alsa_stream;
++		alsa_stream->instance = instance;
++		ret = 0;	// xxx todo -1;
++		goto err_free_mem;
++	}
++
++	/* Initialize and create a VCHI connection */
++	ret = vchi_initialise(&vchi_instance);
++	if (ret != 0) {
++		LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n",
++			__func__, ret);
++
++		ret = -EIO;
++		goto err_free_mem;
++	}
++	ret = vchi_connect(NULL, 0, vchi_instance);
++	if (ret != 0) {
++		LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n",
++			__func__, ret);
++
++		ret = -EIO;
++		goto err_free_mem;
++	}
++
++	/* Initialize an instance of the audio service */
++	instance = vc_vchi_audio_init(vchi_instance, &vchi_connection, 1);
++
++	if (instance == NULL /*|| audio_handle != instance */ ) {
++		LOG_ERR("%s: failed to initialize audio service\n", __func__);
++
++		ret = -EPERM;
++		goto err_free_mem;
++	}
++
++	instance->alsa_stream = alsa_stream;
++	alsa_stream->instance = instance;
++
++	LOG_DBG(" success !\n");
++err_free_mem:
++	LOG_DBG(" .. OUT\n");
++
++	return ret;
++}
++
++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream)
++{
++	AUDIO_INSTANCE_T *instance;
++	VC_AUDIO_MSG_T m;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	my_workqueue_init(alsa_stream);
++
++	ret = bcm2835_audio_open_connection(alsa_stream);
++	if (ret != 0) {
++		ret = -1;
++		goto exit;
++	}
++	instance = alsa_stream->instance;
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	m.type = VC_AUDIO_MSG_TYPE_OPEN;
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++exit:
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++static int bcm2835_audio_set_ctls_chan(bcm2835_alsa_stream_t * alsa_stream,
++				       bcm2835_chip_t * chip)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	LOG_INFO
++	    (" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume);
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	instance->result = -1;
++
++	m.type = VC_AUDIO_MSG_TYPE_CONTROL;
++	m.u.control.dest = chip->dest;
++	m.u.control.volume = chip->volume;
++
++	/* Create the message available completion */
++	init_completion(&instance->msg_avail_comp);
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	/* We are expecting a reply from the videocore */
++	ret = wait_for_completion_interruptible(&instance->msg_avail_comp);
++	if (ret) {
++		LOG_ERR("%s: failed on waiting for event (status=%d)\n",
++			__func__, success);
++		goto unlock;
++	}
++
++	if (instance->result != 0) {
++		LOG_ERR("%s: result=%d\n", __func__, instance->result);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip)
++{
++	int i;
++	int ret = 0;
++	LOG_DBG(" .. IN\n");
++
++	/* change ctls for all substreams */
++	for (i = 0; i < MAX_SUBSTREAMS; i++) {
++		if (chip->avail_substreams & (1 << i)) {
++			if (!chip->alsa_stream[i])
++			{
++				LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams);
++				ret = 0;
++			}
++			else if (bcm2835_audio_set_ctls_chan /* returns 0 on success */
++				 (chip->alsa_stream[i], chip) != 0)
++				 {
++					LOG_DBG("Couldn't set the controls for stream %d\n", i);
++					ret = -1;
++				 }
++			else LOG_DBG(" Controls set for stream %d\n", i);
++		}
++	}
++	LOG_DBG(" .. OUT ret=%d\n", ret);
++	return ret;
++}
++
++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream,
++			     uint32_t channels, uint32_t samplerate,
++			     uint32_t bps)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	LOG_INFO
++	    (" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n",
++	     channels, samplerate, bps);
++
++	/* resend ctls - alsa_stream may not have been open when first send */
++	ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip);
++	if (ret != 0) {
++		LOG_ERR(" Alsa controls not supported\n");
++		return -EINVAL;
++	}
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	instance->result = -1;
++
++	m.type = VC_AUDIO_MSG_TYPE_CONFIG;
++	m.u.config.channels = channels;
++	m.u.config.samplerate = samplerate;
++	m.u.config.bps = bps;
++
++	/* Create the message available completion */
++	init_completion(&instance->msg_avail_comp);
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	/* We are expecting a reply from the videocore */
++	ret = wait_for_completion_interruptible(&instance->msg_avail_comp);
++	if (ret) {
++		LOG_ERR("%s: failed on waiting for event (status=%d)\n",
++			__func__, success);
++		goto unlock;
++	}
++
++	if (instance->result != 0) {
++		LOG_ERR("%s: result=%d", __func__, instance->result);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream)
++{
++	LOG_DBG(" .. IN\n");
++
++	LOG_DBG(" .. OUT\n");
++
++	return 0;
++}
++
++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	m.type = VC_AUDIO_MSG_TYPE_START;
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	m.type = VC_AUDIO_MSG_TYPE_STOP;
++	m.u.stop.draining = alsa_stream->draining;
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	my_workqueue_quit(alsa_stream);
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	m.type = VC_AUDIO_MSG_TYPE_CLOSE;
++
++	/* Create the message available completion */
++	init_completion(&instance->msg_avail_comp);
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++			__func__, success);
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = wait_for_completion_interruptible(&instance->msg_avail_comp);
++	if (ret) {
++		LOG_ERR("%s: failed on waiting for event (status=%d)",
++			__func__, success);
++		goto unlock;
++	}
++	if (instance->result != 0) {
++		LOG_ERR("%s: failed result (status=%d)",
++			__func__, instance->result);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++
++	/* Stop the audio service */
++	if (instance) {
++		vc_vchi_audio_deinit(instance);
++		alsa_stream->instance = NULL;
++	}
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream,
++			       uint32_t count, void *src)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++
++	LOG_DBG(" .. IN\n");
++
++	LOG_INFO(" Writing %d bytes from %p\n", count, src);
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	if ( instance->peer_version==0 && vchi_get_peer_version(instance->vchi_handle[0], &instance->peer_version) == 0 ) {
++		LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version);
++	}
++	m.type = VC_AUDIO_MSG_TYPE_WRITE;
++	m.u.write.count = count;
++	// old version uses bulk, new version uses control
++	m.u.write.max_packet = instance->peer_version < 2 || force_bulk ? 0:4000;
++	m.u.write.callback = alsa_stream->fifo_irq_handler;
++	m.u.write.cookie = alsa_stream;
++	m.u.write.silence = src == NULL;
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++	if (!m.u.write.silence) {
++		if (m.u.write.max_packet == 0) {
++			/* Send the message to the videocore */
++			success = vchi_bulk_queue_transmit(instance->vchi_handle[0],
++							   src, count,
++							   0 *
++							   VCHI_FLAGS_BLOCK_UNTIL_QUEUED
++							   +
++							   1 *
++							   VCHI_FLAGS_BLOCK_UNTIL_DATA_READ,
++							   NULL);
++		} else {
++			while (count > 0) {
++				int bytes = min((int)m.u.write.max_packet, (int)count);
++				success = vchi_msg_queue(instance->vchi_handle[0],
++							 src, bytes,
++							 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++				src = (char *)src + bytes;
++				count -= bytes;
++			}
++		}
++		if (success != 0) {
++			LOG_ERR
++			    ("%s: failed on vchi_bulk_queue_transmit (status=%d)",
++			     __func__, success);
++
++			ret = -1;
++			goto unlock;
++		}
++	}
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++/**
++  * Returns all buffers from arm->vc
++  */
++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream)
++{
++	LOG_DBG(" .. IN\n");
++	LOG_DBG(" .. OUT\n");
++	return;
++}
++
++/**
++  * Forces VC to flush(drop) its filled playback buffers and 
++  * return them the us. (VC->ARM)
++  */
++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream)
++{
++	LOG_DBG(" .. IN\n");
++	LOG_DBG(" .. OUT\n");
++}
++
++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream)
++{
++	uint32_t count = atomic_read(&alsa_stream->retrieved);
++	atomic_sub(count, &alsa_stream->retrieved);
++	return count;
++}
++
++module_param(force_bulk, bool, 0444);
++MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio");
+diff -urN linux-3.10/sound/arm/Kconfig linux-rpi-3.10.y/sound/arm/Kconfig
+--- linux-3.10/sound/arm/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -39,5 +39,12 @@
+ 	  Say Y or M if you want to support any AC97 codec attached to
+ 	  the PXA2xx AC97 interface.
+ 
++config SND_BCM2835
++	tristate "BCM2835 ALSA driver"
++	depends on ARCH_BCM2708 && BCM2708_VCHIQ && SND
++	select SND_PCM
++	help
++	  Say Y or M if you want to support BCM2835 Alsa pcm card driver
++
+ endif	# SND_ARM
+ 
+diff -urN linux-3.10/sound/arm/Makefile linux-rpi-3.10.y/sound/arm/Makefile
+--- linux-3.10/sound/arm/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -14,3 +14,9 @@
+ 
+ obj-$(CONFIG_SND_PXA2XX_AC97)	+= snd-pxa2xx-ac97.o
+ snd-pxa2xx-ac97-objs		:= pxa2xx-ac97.o
++
++obj-$(CONFIG_SND_BCM2835)	+= snd-bcm2835.o
++snd-bcm2835-objs		:= bcm2835.o bcm2835-ctl.o bcm2835-pcm.o bcm2835-vchiq.o
++
++EXTRA_CFLAGS += -Idrivers/misc/vc04_services -Idrivers/misc/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000
++
+diff -urN linux-3.10/sound/arm/vc_vchi_audioserv_defs.h linux-rpi-3.10.y/sound/arm/vc_vchi_audioserv_defs.h
+--- linux-3.10/sound/arm/vc_vchi_audioserv_defs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/sound/arm/vc_vchi_audioserv_defs.h	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,116 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#ifndef _VC_AUDIO_DEFS_H_
++#define _VC_AUDIO_DEFS_H_
++
++#define VC_AUDIOSERV_MIN_VER 1
++#define VC_AUDIOSERV_VER 2
++
++// FourCC code used for VCHI connection
++#define VC_AUDIO_SERVER_NAME  MAKE_FOURCC("AUDS")
++
++// Maximum message length
++#define VC_AUDIO_MAX_MSG_LEN  (sizeof( VC_AUDIO_MSG_T ))
++
++// List of screens that are currently supported
++// All message types supported for HOST->VC direction
++typedef enum {
++	VC_AUDIO_MSG_TYPE_RESULT,	// Generic result
++	VC_AUDIO_MSG_TYPE_COMPLETE,	// Generic result
++	VC_AUDIO_MSG_TYPE_CONFIG,	// Configure audio
++	VC_AUDIO_MSG_TYPE_CONTROL,	// Configure audio
++	VC_AUDIO_MSG_TYPE_OPEN,	// Configure audio
++	VC_AUDIO_MSG_TYPE_CLOSE,	// Configure audio
++	VC_AUDIO_MSG_TYPE_START,	// Configure audio
++	VC_AUDIO_MSG_TYPE_STOP,	// Configure audio
++	VC_AUDIO_MSG_TYPE_WRITE,	// Configure audio
++	VC_AUDIO_MSG_TYPE_MAX
++} VC_AUDIO_MSG_TYPE;
++
++// configure the audio
++typedef struct {
++	uint32_t channels;
++	uint32_t samplerate;
++	uint32_t bps;
++
++} VC_AUDIO_CONFIG_T;
++
++typedef struct {
++	uint32_t volume;
++	uint32_t dest;
++
++} VC_AUDIO_CONTROL_T;
++
++// audio
++typedef struct {
++	uint32_t dummy;
++
++} VC_AUDIO_OPEN_T;
++
++// audio
++typedef struct {
++	uint32_t dummy;
++
++} VC_AUDIO_CLOSE_T;
++// audio
++typedef struct {
++	uint32_t dummy;
++
++} VC_AUDIO_START_T;
++// audio
++typedef struct {
++	uint32_t draining;
++
++} VC_AUDIO_STOP_T;
++
++// configure the write audio samples
++typedef struct {
++	uint32_t count;		// in bytes
++	void *callback;
++	void *cookie;
++	uint16_t silence;
++	uint16_t max_packet;
++} VC_AUDIO_WRITE_T;
++
++// Generic result for a request (VC->HOST)
++typedef struct {
++	int32_t success;	// Success value
++
++} VC_AUDIO_RESULT_T;
++
++// Generic result for a request (VC->HOST)
++typedef struct {
++	int32_t count;		// Success value
++	void *callback;
++	void *cookie;
++} VC_AUDIO_COMPLETE_T;
++
++// Message header for all messages in HOST->VC direction
++typedef struct {
++	int32_t type;		// Message type (VC_AUDIO_MSG_TYPE)
++	union {
++		VC_AUDIO_CONFIG_T config;
++		VC_AUDIO_CONTROL_T control;
++		VC_AUDIO_OPEN_T open;
++		VC_AUDIO_CLOSE_T close;
++		VC_AUDIO_START_T start;
++		VC_AUDIO_STOP_T stop;
++		VC_AUDIO_WRITE_T write;
++		VC_AUDIO_RESULT_T result;
++		VC_AUDIO_COMPLETE_T complete;
++	} u;
++} VC_AUDIO_MSG_T;
++
++#endif // _VC_AUDIO_DEFS_H_
diff --git a/target/linux/brcm2708/patches-3.10/013-bcm2835-hwmon-driver.patch b/target/linux/brcm2708/patches-3.10/013-bcm2835-hwmon-driver.patch
new file mode 100644
index 0000000000..45980532c4
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/013-bcm2835-hwmon-driver.patch
@@ -0,0 +1,257 @@
+Index: linux-3.10/drivers/hwmon/bcm2835-hwmon.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-3.10/drivers/hwmon/bcm2835-hwmon.c	2013-07-09 20:25:51.309324091 +0100
+@@ -0,0 +1,219 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/hwmon.h>
++#include <linux/hwmon-sysfs.h>
++#include <linux/platform_device.h>
++#include <linux/sysfs.h>
++#include <mach/vcio.h>
++#include <linux/slab.h>
++#include <linux/err.h>
++
++#define MODULE_NAME "bcm2835_hwmon"
++
++/*#define HWMON_DEBUG_ENABLE*/
++
++#ifdef HWMON_DEBUG_ENABLE
++#define print_debug(fmt,...) printk(KERN_INFO "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
++#else
++#define print_debug(fmt,...)
++#endif
++#define print_err(fmt,...) printk(KERN_ERR "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
++#define print_info(fmt,...) printk(KERN_INFO "%s: "fmt"\n", MODULE_NAME, ##__VA_ARGS__)
++
++#define VC_TAG_GET_TEMP 0x00030006
++#define VC_TAG_GET_MAX_TEMP 0x0003000A
++
++/* --- STRUCTS --- */
++struct bcm2835_hwmon_data {
++	struct device *hwmon_dev;
++};
++
++/* tag part of the message */
++struct vc_msg_tag {
++	uint32_t tag_id;		/* the tag ID for the temperature */
++	uint32_t buffer_size;	/* size of the buffer (should be 8) */
++	uint32_t request_code;	/* identifies message as a request (should be 0) */
++	uint32_t id;			/* extra ID field (should be 0) */
++	uint32_t val;			/* returned value of the temperature */
++};
++
++/* message structure to be sent to videocore */
++struct vc_msg {
++	uint32_t msg_size;		/* simply, sizeof(struct vc_msg) */
++	uint32_t request_code;		/* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */
++	struct vc_msg_tag tag;		/* the tag structure above to make */
++	uint32_t end_tag;		/* an end identifier, should be set to NULL */
++};
++
++typedef enum {
++	TEMP,
++	MAX_TEMP,
++} temp_type;
++
++/* --- PROTOTYPES --- */
++static ssize_t bcm2835_get_temp(struct device *dev, struct device_attribute *attr, char *buf);
++static ssize_t bcm2835_get_name(struct device *dev, struct device_attribute *attr, char *buf);
++
++/* --- GLOBALS --- */
++
++static struct bcm2835_hwmon_data *bcm2835_data;
++static struct platform_driver bcm2835_hwmon_driver;
++
++static SENSOR_DEVICE_ATTR(name, S_IRUGO,bcm2835_get_name,NULL,0);
++static SENSOR_DEVICE_ATTR(temp1_input,S_IRUGO,bcm2835_get_temp,NULL,TEMP);
++static SENSOR_DEVICE_ATTR(temp1_max,S_IRUGO,bcm2835_get_temp,NULL,MAX_TEMP);
++
++static struct attribute* bcm2835_attributes[] = {
++	&sensor_dev_attr_name.dev_attr.attr,
++	&sensor_dev_attr_temp1_input.dev_attr.attr,
++	&sensor_dev_attr_temp1_max.dev_attr.attr,
++	NULL,
++};
++
++static struct attribute_group bcm2835_attr_group = {
++	.attrs = bcm2835_attributes,
++};
++
++/* --- FUNCTIONS --- */
++
++static ssize_t bcm2835_get_name(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	return sprintf(buf,"bcm2835_hwmon\n");
++}
++
++static ssize_t bcm2835_get_temp(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct vc_msg msg;
++	int result;
++	uint temp = 0;
++	int index = ((struct sensor_device_attribute*)to_sensor_dev_attr(attr))->index;
++
++	print_debug("IN");
++
++	/* wipe all previous message data */
++	memset(&msg, 0, sizeof msg);
++
++	/* determine the message type */
++	if(index == TEMP)
++		msg.tag.tag_id = VC_TAG_GET_TEMP;
++	else if (index == MAX_TEMP)
++		msg.tag.tag_id = VC_TAG_GET_MAX_TEMP;
++	else
++	{
++		print_debug("Unknown temperature message!");
++		return -EINVAL;
++	}
++
++	msg.msg_size = sizeof msg;
++	msg.tag.buffer_size = 8;
++
++	/* send the message */
++	result = bcm_mailbox_property(&msg, sizeof msg);
++
++	/* check if it was all ok and return the rate in milli degrees C */
++	if (result == 0 && (msg.request_code & 0x80000000))
++		temp = (uint)msg.tag.val;
++	#ifdef HWMON_DEBUG_ENABLE
++	else
++		print_debug("Failed to get temperature!");
++	#endif
++	print_debug("Got temperature as %u",temp);
++	print_debug("OUT");
++	return sprintf(buf, "%u\n", temp);
++}
++
++
++static int bcm2835_hwmon_probe(struct platform_device *pdev)
++{
++	int err;
++
++	print_debug("IN");
++	print_debug("HWMON Driver has been probed!");
++
++	/* check that the device isn't null!*/
++	if(pdev == NULL)
++	{
++		print_debug("Platform device is empty!");
++		return -ENODEV;
++	}
++
++	/* allocate memory for neccessary data */
++	bcm2835_data = kzalloc(sizeof(struct bcm2835_hwmon_data),GFP_KERNEL);
++	if(!bcm2835_data)
++	{
++		print_debug("Unable to allocate memory for hwmon data!");
++		err = -ENOMEM;
++		goto kzalloc_error;
++	}
++
++	/* create the sysfs files */
++	if(sysfs_create_group(&pdev->dev.kobj, &bcm2835_attr_group))
++	{
++		print_debug("Unable to create sysfs files!");
++		err = -EFAULT;
++		goto sysfs_error;
++	}
++
++	/* register the hwmon device */
++	bcm2835_data->hwmon_dev = hwmon_device_register(&pdev->dev);
++	if (IS_ERR(bcm2835_data->hwmon_dev))
++	{
++		err = PTR_ERR(bcm2835_data->hwmon_dev);
++		goto hwmon_error;
++	}
++	print_debug("OUT");
++	return 0;
++
++	/* error goto's */
++	hwmon_error:
++	sysfs_remove_group(&pdev->dev.kobj, &bcm2835_attr_group);
++
++	sysfs_error:
++	kfree(bcm2835_data);
++
++	kzalloc_error:
++
++	return err;
++
++}
++
++static int bcm2835_hwmon_remove(struct platform_device *pdev)
++{
++	print_debug("IN");
++	hwmon_device_unregister(bcm2835_data->hwmon_dev);
++
++	sysfs_remove_group(&pdev->dev.kobj, &bcm2835_attr_group);
++	print_debug("OUT");
++	return 0;
++}
++
++/* Hwmon Driver */
++static struct platform_driver bcm2835_hwmon_driver = {
++	.probe = bcm2835_hwmon_probe,
++	.remove = bcm2835_hwmon_remove,
++	.driver = {
++				.name = "bcm2835_hwmon",
++				.owner = THIS_MODULE,
++			},
++};
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Dorian Peake");
++MODULE_DESCRIPTION("HW Monitor driver for bcm2835 chip");
++
++module_platform_driver(bcm2835_hwmon_driver);
+Index: linux-3.10/drivers/hwmon/Kconfig
+===================================================================
+--- linux-3.10.orig/drivers/hwmon/Kconfig	2013-07-09 20:25:51.321324159 +0100
++++ linux-3.10/drivers/hwmon/Kconfig	2013-07-09 20:25:51.313324108 +0100
+@@ -1537,6 +1537,16 @@
+         help
+           Support for the A/D converter on MC13783 and MC13892 PMIC.
+ 
++config SENSORS_BCM2835
++	depends on THERMAL_BCM2835=n
++	tristate "Broadcom BCM2835 HWMON Driver"
++	help
++	  If you say yes here you get support for the hardware
++	  monitoring features of the BCM2835 Chip
++
++	  This driver can also be built as a module.  If so, the module
++	  will be called bcm2835-hwmon.
++
+ if ACPI
+ 
+ comment "ACPI drivers"
+Index: linux-3.10/drivers/hwmon/Makefile
+===================================================================
+--- linux-3.10.orig/drivers/hwmon/Makefile	2013-07-09 20:25:51.321324159 +0100
++++ linux-3.10/drivers/hwmon/Makefile	2013-07-09 20:26:07.361403698 +0100
+@@ -141,6 +141,7 @@
+ obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
+ obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
+ obj-$(CONFIG_SENSORS_GSC)	+= gsc.o
++obj-$(CONFIG_SENSORS_BCM2835)	+= bcm2835-hwmon.o
+ 
+ obj-$(CONFIG_PMBUS)		+= pmbus/
+ 
diff --git a/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch b/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch
new file mode 100644
index 0000000000..b76eaf452c
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch
@@ -0,0 +1,2581 @@
+diff -urwN linux-3.10/drivers/mmc/card/block.c linux-rpi-3.10.y/drivers/mmc/card/block.c
+--- linux-3.10/drivers/mmc/card/block.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/card/block.c	2013-07-06 15:25:50.000000000 +0100
+@@ -1294,7 +1294,7 @@
+ 			brq->data.blocks = 1;
+ 	}
+ 
+-	if (brq->data.blocks > 1 || do_rel_wr) {
++	if (brq->data.blocks > 1 || do_rel_wr || card->host->caps2 & MMC_CAP2_FORCE_MULTIBLOCK) {
+ 		/* SPI multiblock writes terminate using a special
+ 		 * token, not a STOP_TRANSMISSION request.
+ 		 */
+diff -urwN linux-3.10/drivers/mmc/core/sd.c linux-rpi-3.10.y/drivers/mmc/core/sd.c
+--- linux-3.10/drivers/mmc/core/sd.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/core/sd.c	2013-07-06 15:25:50.000000000 +0100
+@@ -13,6 +13,8 @@
+ #include <linux/err.h>
+ #include <linux/slab.h>
+ #include <linux/stat.h>
++#include <linux/jiffies.h>
++#include <linux/nmi.h>
+ 
+ #include <linux/mmc/host.h>
+ #include <linux/mmc/card.h>
+@@ -58,6 +60,15 @@
+ 		__res & __mask;						\
+ 	})
+ 
++// timeout for tries
++static const unsigned long retry_timeout_ms= 10*1000;
++
++// try at least 10 times, even if timeout is reached
++static const int retry_min_tries= 10;
++
++// delay between tries
++static const unsigned long retry_delay_ms= 10;
++
+ /*
+  * Given the decoded CSD structure, decode the raw CID to our CID structure.
+  */
+@@ -210,12 +221,62 @@
+ }
+ 
+ /*
+- * Fetch and process SD Status register.
++ * Fetch and process SD Configuration Register.
++ */
++static int mmc_read_scr(struct mmc_card *card)
++{
++	unsigned long timeout_at;
++	int err, tries;
++
++	timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms );
++	tries= 		0;
++
++	while( tries < retry_min_tries || time_before( jiffies, timeout_at ) )
++	{
++		unsigned long delay_at;
++		tries++;
++
++		err = mmc_app_send_scr(card, card->raw_scr);
++		if( !err )
++			break; // success!!!
++
++		touch_nmi_watchdog();	  // we are still alive!
++
++		// delay
++		delay_at= jiffies + msecs_to_jiffies( retry_delay_ms );
++		while( time_before( jiffies, delay_at ) )
++		{
++			mdelay( 1 );
++			touch_nmi_watchdog();	  // we are still alive!
++		}
++	}
++	
++	if( err)
++	{
++		pr_err("%s: failed to read SD Configuration register (SCR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err );
++		return err;
++	}
++
++	if( tries > 1 )
++	{
++		pr_info("%s: could read SD Configuration register (SCR) at the %dth attempt\n", mmc_hostname(card->host), tries );
++	}
++
++	err = mmc_decode_scr(card);
++	if (err)
++		return err;
++	
++	return err;
++}
++
++/*
++ * Fetch and process SD Status Register.
+  */
+ static int mmc_read_ssr(struct mmc_card *card)
+ {
++	unsigned long timeout_at;
+ 	unsigned int au, es, et, eo;
+-	int err, i;
++	int err, i, tries;
+ 	u32 *ssr;
+ 
+ 	if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
+@@ -228,14 +289,40 @@
+ 	if (!ssr)
+ 		return -ENOMEM;
+ 
++	timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms );
++	tries= 		0;
++	
++	while( tries < retry_min_tries || time_before( jiffies, timeout_at ) )
++	{
++		unsigned long delay_at;
++		tries++;
++		
+ 	err = mmc_app_sd_status(card, ssr);
+-	if (err) {
+-		pr_warning("%s: problem reading SD Status "
+-			"register.\n", mmc_hostname(card->host));
+-		err = 0;
++		if( !err )
++			break; // sucess!!!
++	
++		touch_nmi_watchdog();	  // we are still alive!
++	
++		// delay
++		delay_at= jiffies + msecs_to_jiffies( retry_delay_ms );
++		while( time_before( jiffies, delay_at ) )
++		{
++			mdelay( 1 );
++			touch_nmi_watchdog();	  // we are still alive!
++		}			
++	}
++	
++	if( err) 
++	{
++		pr_err("%s: failed to read SD Status register (SSR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err );
+ 		goto out;
+ 	}
+ 
++	if( tries > 1 )
++	{
++		pr_info("%s: read SD Status register (SSR) after %d attempts\n", mmc_hostname(card->host), tries );
++	}
++
+ 	for (i = 0; i < 16; i++)
+ 		ssr[i] = be32_to_cpu(ssr[i]);
+ 
+@@ -808,13 +895,9 @@
+ 
+ 	if (!reinit) {
+ 		/*
+-		 * Fetch SCR from card.
++		 * Fetch and decode SD Configuration register.
+ 		 */
+-		err = mmc_app_send_scr(card, card->raw_scr);
+-		if (err)
+-			return err;
+-
+-		err = mmc_decode_scr(card);
++	  	err = mmc_read_scr(card);
+ 		if (err)
+ 			return err;
+ 
+diff -urwN linux-3.10/drivers/mmc/host/Kconfig linux-rpi-3.10.y/drivers/mmc/host/Kconfig
+--- linux-3.10/drivers/mmc/host/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -249,6 +249,27 @@
+ 
+ 	  YMMV.
+ 
++config MMC_SDHCI_BCM2708
++	tristate "SDHCI support on BCM2708"
++	depends on MMC_SDHCI && MACH_BCM2708
++	select MMC_SDHCI_IO_ACCESSORS
++	help
++	  This selects the Secure Digital Host Controller Interface (SDHCI)
++	  often referrered to as the eMMC block.
++
++	  If you have a controller with this interface, say Y or M here.
++
++	  If unsure, say N.
++
++config MMC_SDHCI_BCM2708_DMA
++	bool "DMA support on BCM2708 Arasan controller"
++	depends on MMC_SDHCI_BCM2708
++	help
++	Enable DMA support on the Arasan SDHCI controller in Broadcom 2708
++	  based chips.
++
++	  If unsure, say N.
++
+ config MMC_SDHCI_BCM2835
+ 	tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
+ 	depends on ARCH_BCM2835
+diff -urwN linux-3.10/drivers/mmc/host/Makefile linux-rpi-3.10.y/drivers/mmc/host/Makefile
+--- linux-3.10/drivers/mmc/host/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
+ obj-$(CONFIG_MMC_SDHCI_SIRF)   	+= sdhci-sirf.o
+ obj-$(CONFIG_MMC_SDHCI_SPEAR)	+= sdhci-spear.o
++obj-$(CONFIG_MMC_SDHCI_BCM2708)	+= sdhci-bcm2708.o
+ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+ obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP)		+= omap.o
+diff -urwN linux-3.10/drivers/mmc/host/sdhci-bcm2708.c linux-rpi-3.10.y/drivers/mmc/host/sdhci-bcm2708.c
+--- linux-3.10/drivers/mmc/host/sdhci-bcm2708.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/sdhci-bcm2708.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,1420 @@
++/*
++ * sdhci-bcm2708.c Support for SDHCI device on BCM2708
++ * Copyright (c) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++/* Supports:
++ * SDHCI platform device - Arasan SD controller in BCM2708
++ *
++ * Inspired by sdhci-pci.c, by Pierre Ossman
++ */
++
++#include <linux/delay.h>
++#include <linux/highmem.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/sd.h>
++
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <mach/dma.h>
++
++#include "sdhci.h"
++
++/*****************************************************************************\
++ *									     *
++ * Configuration							     *
++ *									     *
++\*****************************************************************************/
++
++#define DRIVER_NAME "bcm2708_sdhci"
++
++/* for the time being insist on DMA mode - PIO seems not to work */
++#ifndef CONFIG_MMC_SDHCI_BCM2708_DMA
++#warning Non-DMA (PIO) version of this driver currently unavailable
++#endif
++#undef CONFIG_MMC_SDHCI_BCM2708_DMA
++#define CONFIG_MMC_SDHCI_BCM2708_DMA y
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++/* #define CHECK_DMA_USE */
++#endif
++//#define LOG_REGISTERS
++
++#define USE_SCHED_TIME
++#define USE_SPACED_WRITES_2CLK 1  /* space consecutive register writes */
++#define USE_SOFTWARE_TIMEOUTS 1   /* not hardware timeouts */
++#define SOFTWARE_ERASE_TIMEOUT_SEC 30
++
++#define SDHCI_BCM_DMA_CHAN 4   /* this default is normally overriden */
++#define SDHCI_BCM_DMA_WAITS 0  /* delays slowing DMA transfers: 0-31 */
++/* We are worried that SD card DMA use may be blocking the AXI bus for others */
++
++/*! TODO: obtain these from the physical address */
++#define DMA_SDHCI_BASE	 0x7e300000  /* EMMC register block on Videocore */
++#define DMA_SDHCI_BUFFER (DMA_SDHCI_BASE + SDHCI_BUFFER)
++
++#define BCM2708_SDHCI_SLEEP_TIMEOUT 1000   /* msecs */
++
++/* Mhz clock that the EMMC core is running at. Should match the platform clockman settings */
++#define BCM2708_EMMC_CLOCK_FREQ 50000000
++
++#define REG_EXRDFIFO_EN     0x80
++#define REG_EXRDFIFO_CFG    0x84
++
++int cycle_delay=2;
++
++/*****************************************************************************\
++ *									     *
++ * Debug								     *
++ *									     *
++\*****************************************************************************/
++
++
++
++#define DBG(f, x...) \
++	pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
++//	printk(KERN_INFO DRIVER_NAME " [%s()]: " f, __func__,## x)//GRAYG
++
++
++/*****************************************************************************\
++ *									     *
++ * High Precision Time							     *
++ *									     *
++\*****************************************************************************/
++
++#ifdef USE_SCHED_TIME
++
++#include <mach/frc.h>
++
++typedef unsigned long hptime_t;
++
++#define FMT_HPT "lu"
++
++static inline hptime_t hptime(void)
++{
++	return frc_clock_ticks32();
++}
++
++#define HPTIME_CLK_NS 1000ul
++
++#else
++
++typedef unsigned long hptime_t;
++
++#define FMT_HPT "lu"
++
++static inline hptime_t hptime(void)
++{
++	return jiffies;
++}
++
++#define HPTIME_CLK_NS (1000000000ul/HZ)
++
++#endif
++
++static inline unsigned long int since_ns(hptime_t t)
++{
++	return (unsigned long)((hptime() - t) * HPTIME_CLK_NS);
++}
++
++static bool allow_highspeed = 1;
++static int emmc_clock_freq = BCM2708_EMMC_CLOCK_FREQ;
++static bool sync_after_dma = 1;
++static bool missing_status = 1;
++static bool spurious_crc_acmd51 = 0;
++bool enable_llm = 1;
++bool extra_messages = 0;
++
++#if 0
++static void hptime_test(void)
++{
++	hptime_t now;
++	hptime_t later;
++
++	now = hptime();
++	msleep(10);
++	later = hptime();
++
++	printk(KERN_INFO DRIVER_NAME": 10ms = %"FMT_HPT" clks "
++	       "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n",
++	       later-now, now, later,
++	       (unsigned long)(HPTIME_CLK_NS * (later - now)));
++
++	now = hptime();
++	msleep(1000);
++	later = hptime();
++
++	printk(KERN_INFO DRIVER_NAME": 1s = %"FMT_HPT" clks "
++	       "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n",
++	       later-now, now, later,
++	       (unsigned long)(HPTIME_CLK_NS * (later - now)));
++}
++#endif
++
++/*****************************************************************************\
++ *									     *
++ * SDHCI core callbacks							     *
++ *									     *
++\*****************************************************************************/
++
++
++#ifdef CHECK_DMA_USE
++/*#define CHECK_DMA_REG_USE*/
++#endif
++
++#ifdef CHECK_DMA_REG_USE
++/* we don't expect anything to be using these registers during a
++   DMA (except the IRQ status) - so check */
++static void check_dma_reg_use(struct sdhci_host *host, int reg);
++#else
++#define check_dma_reg_use(host, reg)
++#endif
++
++
++static inline u32 sdhci_bcm2708_raw_readl(struct sdhci_host *host, int reg)
++{
++	return readl(host->ioaddr + reg);
++}
++
++u32 sdhci_bcm2708_readl(struct sdhci_host *host, int reg)
++{
++	u32 l = sdhci_bcm2708_raw_readl(host, reg);
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: readl from 0x%02x, value 0x%08x\n",
++	       mmc_hostname(host->mmc), reg, l);
++#endif
++	check_dma_reg_use(host, reg);
++
++	return l;
++}
++
++u16 sdhci_bcm2708_readw(struct sdhci_host *host, int reg)
++{
++	u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3);
++	u32 w = l >> (reg << 3 & 0x18) & 0xffff;
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: readw from 0x%02x, value 0x%04x\n",
++	       mmc_hostname(host->mmc), reg, w);
++#endif
++	check_dma_reg_use(host, reg);
++
++	return (u16)w;
++}
++
++u8 sdhci_bcm2708_readb(struct sdhci_host *host, int reg)
++{
++	u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3);
++	u32 b = l >> (reg << 3 & 0x18) & 0xff;
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: readb from 0x%02x, value 0x%02x\n",
++	       mmc_hostname(host->mmc), reg, b);
++#endif
++	check_dma_reg_use(host, reg);
++
++	return (u8)b;
++}
++
++
++static void sdhci_bcm2708_raw_writel(struct sdhci_host *host, u32 val, int reg)
++{
++	u32 ier;
++
++#if USE_SPACED_WRITES_2CLK
++	static bool timeout_disabled = false;
++	unsigned int ns_2clk = 0;
++        
++	/* The Arasan has a bugette whereby it may lose the content of
++	 * successive writes to registers that are within two SD-card clock
++	 * cycles of each other (a clock domain crossing problem).
++	 * It seems, however, that the data register does not have this problem.
++	 * (Which is just as well - otherwise we'd have to nobble the DMA engine
++	 * too)
++	 */
++	if (reg != SDHCI_BUFFER && host->clock != 0) {
++		/* host->clock is the clock freq in Hz */
++		static hptime_t last_write_hpt;
++		hptime_t now = hptime();
++		ns_2clk = cycle_delay*1000000/(host->clock/1000);
++
++		if (now == last_write_hpt || now == last_write_hpt+1) {
++			 /* we can't guarantee any significant time has
++			  * passed - we'll have to wait anyway ! */
++			ndelay(ns_2clk);
++		} else
++		{
++			/* we must have waited at least this many ns: */
++			unsigned int ns_wait = HPTIME_CLK_NS *
++					       (last_write_hpt - now - 1);
++			if (ns_wait < ns_2clk)
++				ndelay(ns_2clk - ns_wait);
++		}
++		last_write_hpt = now;
++	}
++#if USE_SOFTWARE_TIMEOUTS
++	/* The Arasan is clocked for timeouts using the SD clock which is too
++	 * fast for ERASE commands and causes issues. So we disable timeouts
++	 * for ERASE */
++	if (host->cmd != NULL && host->cmd->opcode == MMC_ERASE &&
++            reg == (SDHCI_COMMAND & ~3)) {
++		mod_timer(&host->timer,
++                          jiffies + SOFTWARE_ERASE_TIMEOUT_SEC * HZ);
++		ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
++		ier &= ~SDHCI_INT_DATA_TIMEOUT;
++		writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
++		timeout_disabled = true;
++		ndelay(ns_2clk);
++	} else if (timeout_disabled) {
++		ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
++		ier |= SDHCI_INT_DATA_TIMEOUT;
++		writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
++		timeout_disabled = false;
++		ndelay(ns_2clk);
++	}
++#endif
++	writel(val, host->ioaddr + reg);
++#else
++	void __iomem * regaddr = host->ioaddr + reg;
++
++	writel(val, regaddr);
++
++	if (reg != SDHCI_BUFFER && reg != SDHCI_INT_STATUS && host->clock != 0)
++	{
++		int timeout = 100000;
++		while (val != readl(regaddr) && --timeout > 0)
++		   continue;
++
++		if (timeout <= 0)
++			printk(KERN_ERR "%s: writing 0x%X to reg 0x%X "
++			       "always gives 0x%X\n",
++			       mmc_hostname(host->mmc),
++			       val, reg, readl(regaddr));
++		BUG_ON(timeout <= 0);
++	}
++#endif
++}
++
++
++void sdhci_bcm2708_writel(struct sdhci_host *host, u32 val, int reg)
++{
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: writel to 0x%02x, value 0x%08x\n",
++	       mmc_hostname(host->mmc), reg, val);
++#endif
++	check_dma_reg_use(host, reg);
++
++	sdhci_bcm2708_raw_writel(host, val, reg);
++}
++
++void sdhci_bcm2708_writew(struct sdhci_host *host, u16 val, int reg)
++{
++	static u32 shadow = 0;
++
++	u32 p = reg == SDHCI_COMMAND ? shadow :
++		       sdhci_bcm2708_raw_readl(host, reg & ~3);
++	u32 s = reg << 3 & 0x18;
++	u32 l = val << s;
++	u32 m = 0xffff << s;
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: writew to 0x%02x, value 0x%04x\n",
++	       mmc_hostname(host->mmc), reg, val);
++#endif
++
++	if (reg == SDHCI_TRANSFER_MODE)
++		shadow = (p & ~m) | l;
++	else {
++		check_dma_reg_use(host, reg);
++		sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3);
++	}
++}
++
++void sdhci_bcm2708_writeb(struct sdhci_host *host, u8 val, int reg)
++{
++	u32 p = sdhci_bcm2708_raw_readl(host, reg & ~3);
++	u32 s = reg << 3 & 0x18;
++	u32 l = val << s;
++	u32 m = 0xff << s;
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: writeb to 0x%02x, value 0x%02x\n",
++	       mmc_hostname(host->mmc), reg, val);
++#endif
++
++       check_dma_reg_use(host, reg);
++       sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3);
++}
++
++static unsigned int sdhci_bcm2708_get_max_clock(struct sdhci_host *host)
++{
++	return emmc_clock_freq;
++}
++
++/*****************************************************************************\
++ *									     *
++ * DMA Operation							     *
++ *									     *
++\*****************************************************************************/
++
++struct sdhci_bcm2708_priv {
++	int			dma_chan;
++	int			dma_irq;
++	void __iomem	       *dma_chan_base;
++	struct bcm2708_dma_cb  *cb_base;   /* DMA control blocks */
++	dma_addr_t		cb_handle;
++	/* tracking scatter gather progress */
++	unsigned		sg_ix;	   /* scatter gather list index */
++	unsigned		sg_done;   /* bytes in current sg_ix done */
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	unsigned char		dma_wanted;  /* DMA transfer requested */
++	unsigned char		dma_waits;   /* wait states in DMAs */
++#ifdef CHECK_DMA_USE
++	unsigned char		dmas_pending; /* no of unfinished DMAs */
++	hptime_t		when_started;
++	hptime_t		when_reset;
++	hptime_t		when_stopped;
++#endif
++#endif
++	/* signalling the end of a transfer */
++	void		      (*complete)(struct sdhci_host *);
++};
++
++#define SDHCI_HOST_PRIV(host) \
++	(struct sdhci_bcm2708_priv *)((struct sdhci_host *)(host)+1)
++
++
++
++#ifdef CHECK_DMA_REG_USE
++static void check_dma_reg_use(struct sdhci_host *host, int reg)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	if (host_priv->dma_wanted && reg != SDHCI_INT_STATUS) {
++		printk(KERN_INFO"%s: accessing register 0x%x during DMA\n",
++		       mmc_hostname(host->mmc), reg);
++	}
++}
++#endif
++
++
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++
++static void sdhci_clear_set_irqgen(struct sdhci_host *host, u32 clear, u32 set)
++{
++	u32 ier;
++
++	ier = sdhci_bcm2708_raw_readl(host, SDHCI_SIGNAL_ENABLE);
++	ier &= ~clear;
++	ier |= set;
++	/* change which requests generate IRQs - makes no difference to
++	   the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */
++	sdhci_bcm2708_raw_writel(host, ier, SDHCI_SIGNAL_ENABLE);
++}
++
++static void sdhci_signal_irqs(struct sdhci_host *host, u32 irqs)
++{
++	sdhci_clear_set_irqgen(host, 0, irqs);
++}
++
++static void sdhci_unsignal_irqs(struct sdhci_host *host, u32 irqs)
++{
++	sdhci_clear_set_irqgen(host, irqs, 0);
++}
++
++
++
++static void schci_bcm2708_cb_read(struct sdhci_bcm2708_priv *host,
++				  int ix,
++				  dma_addr_t dma_addr, unsigned len,
++				  int /*bool*/ is_last)
++{
++	struct bcm2708_dma_cb *cb = &host->cb_base[ix];
++        unsigned char dmawaits = host->dma_waits;
++
++	cb->info   = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) |
++		     BCM2708_DMA_WAITS(dmawaits) |
++		     BCM2708_DMA_S_DREQ	 |
++		     BCM2708_DMA_D_WIDTH |
++		     BCM2708_DMA_D_INC;
++	cb->src	   = DMA_SDHCI_BUFFER;	/* DATA register DMA address */
++	cb->dst	   = dma_addr;
++	cb->length = len;
++	cb->stride = 0;
++
++	if (is_last) {
++		cb->info |= BCM2708_DMA_INT_EN |
++		     BCM2708_DMA_WAIT_RESP;
++		cb->next = 0;
++	} else
++		cb->next = host->cb_handle +
++			   (ix+1)*sizeof(struct bcm2708_dma_cb);
++
++	cb->pad[0] = 0;
++	cb->pad[1] = 0;
++}
++
++static void schci_bcm2708_cb_write(struct sdhci_bcm2708_priv *host,
++				   int ix,
++				   dma_addr_t dma_addr, unsigned len,
++				   int /*bool*/ is_last)
++{
++	struct bcm2708_dma_cb *cb = &host->cb_base[ix];
++        unsigned char dmawaits = host->dma_waits;
++
++	/* We can make arbitrarily large writes as long as we specify DREQ to
++	   pace the delivery of bytes to the Arasan hardware */
++	cb->info   = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) |
++		     BCM2708_DMA_WAITS(dmawaits) |
++		     BCM2708_DMA_D_DREQ	 |
++		     BCM2708_DMA_S_WIDTH |
++		     BCM2708_DMA_S_INC;
++	cb->src	   = dma_addr;
++	cb->dst	   = DMA_SDHCI_BUFFER;	/* DATA register DMA address */
++	cb->length = len;
++	cb->stride = 0;
++
++	if (is_last) {
++		cb->info |= BCM2708_DMA_INT_EN |
++		     BCM2708_DMA_WAIT_RESP;
++		cb->next = 0;
++	} else
++		cb->next = host->cb_handle +
++			   (ix+1)*sizeof(struct bcm2708_dma_cb);
++
++	cb->pad[0] = 0;
++	cb->pad[1] = 0;
++}
++
++
++static void schci_bcm2708_dma_go(struct sdhci_host *host)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	void __iomem *dma_chan_base = host_priv->dma_chan_base;
++
++	BUG_ON(host_priv->dma_wanted);
++#ifdef CHECK_DMA_USE
++	if (host_priv->dma_wanted)
++		printk(KERN_ERR "%s: DMA already in progress - "
++		       "now %"FMT_HPT", last started %lu "
++		       "reset %lu stopped %lu\n",
++		       mmc_hostname(host->mmc),
++		       hptime(), since_ns(host_priv->when_started),
++		       since_ns(host_priv->when_reset),
++		       since_ns(host_priv->when_stopped));
++	else if (host_priv->dmas_pending > 0)
++		printk(KERN_INFO "%s: note - new DMA when %d reset DMAs "
++		       "already in progress - "
++		       "now %"FMT_HPT", started %lu reset %lu stopped %lu\n",
++		       mmc_hostname(host->mmc),
++		       host_priv->dmas_pending,
++		       hptime(), since_ns(host_priv->when_started),
++		       since_ns(host_priv->when_reset),
++		       since_ns(host_priv->when_stopped));
++	host_priv->dmas_pending += 1;
++	host_priv->when_started = hptime();
++#endif
++	host_priv->dma_wanted = 1;
++	DBG("PDMA go - base %p handle %08X\n", dma_chan_base,
++	    host_priv->cb_handle);
++	bcm_dma_start(dma_chan_base, host_priv->cb_handle);
++}
++
++
++static void
++sdhci_platdma_read(struct sdhci_host *host, dma_addr_t dma_addr, size_t len)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++
++	DBG("PDMA to read %d bytes\n", len);
++	host_priv->sg_done += len;
++	schci_bcm2708_cb_read(host_priv, 0, dma_addr, len, 1/*TRUE*/);
++	schci_bcm2708_dma_go(host);
++}
++
++
++static void
++sdhci_platdma_write(struct sdhci_host *host, dma_addr_t dma_addr, size_t len)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++
++	DBG("PDMA to write %d bytes\n", len);
++	//BUG_ON(0 != (len & 0x1ff));
++
++	host_priv->sg_done += len;
++	schci_bcm2708_cb_write(host_priv, 0, dma_addr, len, 1/*TRUE*/);
++	schci_bcm2708_dma_go(host);
++}
++
++/*! space is avaiable to receive into or data is available to write
++  Platform DMA exported function
++*/
++void
++sdhci_bcm2708_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask,
++			    void(*completion_callback)(struct sdhci_host *host))
++{
++	struct mmc_data *data = host->data;
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	int sg_ix;
++	size_t bytes;
++	dma_addr_t addr;
++
++	BUG_ON(NULL == data);
++	BUG_ON(0 == data->blksz);
++
++	host_priv->complete = completion_callback;
++
++	sg_ix = host_priv->sg_ix;
++	BUG_ON(sg_ix >= data->sg_len);
++
++	/* we can DMA blocks larger than blksz - it may hang the DMA
++	   channel but we are its only user */
++	bytes = sg_dma_len(&data->sg[sg_ix]) - host_priv->sg_done;
++	addr = sg_dma_address(&data->sg[sg_ix]) + host_priv->sg_done;
++
++	if (bytes > 0) {
++		/* We're going to poll for read/write available state until
++		   we finish this DMA
++		*/
++
++		if (data->flags & MMC_DATA_READ) {
++			if (*ref_intmask & SDHCI_INT_DATA_AVAIL)  {
++				sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
++						    SDHCI_INT_SPACE_AVAIL);
++				sdhci_platdma_read(host, addr, bytes);
++			}
++		} else {
++			if (*ref_intmask & SDHCI_INT_SPACE_AVAIL) {
++				sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
++						    SDHCI_INT_SPACE_AVAIL);
++				sdhci_platdma_write(host, addr, bytes);
++			}
++		}
++	}
++	/* else:
++	   we have run out of bytes that need transferring (e.g. we may be in
++	   the middle of the last DMA transfer), or
++	   it is also possible that we've been called when another IRQ is
++	   signalled, even though we've turned off signalling of our own IRQ */
++
++	*ref_intmask &= ~SDHCI_INT_DATA_END;
++	/* don't let the main sdhci driver act on this .. we'll deal with it
++	   when we respond to the DMA - if one is currently in progress */
++}
++
++/* is it possible to DMA the given mmc_data structure?
++   Platform DMA exported function
++*/
++int /*bool*/
++sdhci_bcm2708_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	int ok = bcm_sg_suitable_for_dma(data->sg, data->sg_len);
++
++	if (!ok)
++		DBG("Reverting to PIO - bad cache alignment\n");
++
++	else {
++		host_priv->sg_ix = 0;	 /* first SG index */
++		host_priv->sg_done = 0;	 /* no bytes done */
++	}
++
++	return ok;
++}
++
++#include <mach/arm_control.h> //GRAYG
++/*! the current SD transacton has been abandonned
++  We need to tidy up if we were in the middle of a DMA
++  Platform DMA exported function
++*/
++void
++sdhci_bcm2708_platdma_reset(struct sdhci_host *host, struct mmc_data *data)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++//	unsigned long flags;
++
++	BUG_ON(NULL == host);
++
++//	spin_lock_irqsave(&host->lock, flags);
++
++	if (host_priv->dma_wanted) {
++		if (NULL == data) {
++			printk(KERN_ERR "%s: ongoing DMA reset - no data!\n",
++			       mmc_hostname(host->mmc));
++			BUG_ON(NULL == data);
++		} else {
++			struct scatterlist *sg;
++			int sg_len;
++			int sg_todo;
++			int rc;
++			unsigned long cs;
++
++			sg = data->sg;
++			sg_len = data->sg_len;
++			sg_todo = sg_dma_len(&sg[host_priv->sg_ix]);
++
++			cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS);
++
++			if (!(BCM2708_DMA_ACTIVE & cs))
++			{
++				if (extra_messages)
++					printk(KERN_INFO "%s: missed completion of "
++				       "cmd %d DMA (%d/%d [%d]/[%d]) - "
++				       "ignoring it\n",
++				       mmc_hostname(host->mmc),
++				       host->last_cmdop,
++				       host_priv->sg_done, sg_todo,
++				       host_priv->sg_ix+1, sg_len);
++			}
++			else
++				printk(KERN_INFO "%s: resetting ongoing cmd %d"
++				       "DMA before %d/%d [%d]/[%d] complete\n",
++				       mmc_hostname(host->mmc),
++				       host->last_cmdop,
++				       host_priv->sg_done, sg_todo,
++				       host_priv->sg_ix+1, sg_len);
++#ifdef CHECK_DMA_USE
++			printk(KERN_INFO "%s: now %"FMT_HPT" started %lu "
++			       "last reset %lu last stopped %lu\n",
++			       mmc_hostname(host->mmc),
++			       hptime(), since_ns(host_priv->when_started),
++			       since_ns(host_priv->when_reset),
++			       since_ns(host_priv->when_stopped));
++			{	unsigned long info, debug;
++				void __iomem *base;
++				unsigned long pend0, pend1, pend2;
++				   
++				base = host_priv->dma_chan_base;
++				cs = readl(base + BCM2708_DMA_CS);
++				info = readl(base + BCM2708_DMA_INFO);
++				debug = readl(base + BCM2708_DMA_DEBUG);
++				printk(KERN_INFO "%s: DMA%d CS=%08lX TI=%08lX "
++				       "DEBUG=%08lX\n",
++				       mmc_hostname(host->mmc),
++                                       host_priv->dma_chan,
++				       cs, info, debug);
++				pend0 = readl(__io_address(ARM_IRQ_PEND0));
++				pend1 = readl(__io_address(ARM_IRQ_PEND1));
++				pend2 = readl(__io_address(ARM_IRQ_PEND2));
++				
++				printk(KERN_INFO "%s: PEND0=%08lX "
++				       "PEND1=%08lX PEND2=%08lX\n",
++				       mmc_hostname(host->mmc),
++				       pend0, pend1, pend2);
++				
++				//gintsts = readl(__io_address(GINTSTS));
++				//gintmsk = readl(__io_address(GINTMSK));
++				//printk(KERN_INFO "%s: USB GINTSTS=%08lX"
++				//	 "GINTMSK=%08lX\n",
++				//	 mmc_hostname(host->mmc), gintsts, gintmsk);
++			}
++#endif
++			rc = bcm_dma_abort(host_priv->dma_chan_base);
++			BUG_ON(rc != 0);
++		}
++		host_priv->dma_wanted = 0;
++#ifdef CHECK_DMA_USE
++		host_priv->when_reset = hptime();
++#endif
++	}
++
++//	spin_unlock_irqrestore(&host->lock, flags);
++}
++
++
++static void sdhci_bcm2708_dma_complete_irq(struct sdhci_host *host,
++					   u32 dma_cs)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	struct mmc_data *data;
++	struct scatterlist *sg;
++	int sg_len;
++	int sg_ix;
++	int sg_todo;
++//	unsigned long flags;
++
++	BUG_ON(NULL == host);
++
++//	spin_lock_irqsave(&host->lock, flags);
++	data = host->data;
++
++#ifdef CHECK_DMA_USE
++	if (host_priv->dmas_pending <= 0)
++		DBG("on completion no DMA in progress - "
++		    "now %"FMT_HPT" started %lu reset %lu stopped %lu\n",
++		    hptime(), since_ns(host_priv->when_started),
++		    since_ns(host_priv->when_reset),
++		    since_ns(host_priv->when_stopped));
++	else if (host_priv->dmas_pending > 1)
++		DBG("still %d DMA in progress after completion - "
++		    "now %"FMT_HPT" started %lu reset %lu stopped %lu\n",
++		    host_priv->dmas_pending - 1,
++		    hptime(), since_ns(host_priv->when_started),
++		    since_ns(host_priv->when_reset),
++		    since_ns(host_priv->when_stopped));
++	BUG_ON(host_priv->dmas_pending <= 0);
++	host_priv->dmas_pending -= 1;
++	host_priv->when_stopped = hptime();
++#endif
++	host_priv->dma_wanted = 0;
++
++	if (NULL == data) {
++		DBG("PDMA unused completion - status 0x%X\n", dma_cs);
++//		spin_unlock_irqrestore(&host->lock, flags);
++		return;
++	}
++	sg = data->sg;
++	sg_len = data->sg_len;
++	sg_todo = sg_dma_len(&sg[host_priv->sg_ix]);
++
++	DBG("PDMA complete %d/%d [%d]/[%d]..\n",
++	    host_priv->sg_done, sg_todo,
++	    host_priv->sg_ix+1, sg_len);
++
++	BUG_ON(host_priv->sg_done > sg_todo);
++
++	if (host_priv->sg_done >= sg_todo) {
++		host_priv->sg_ix++;
++		host_priv->sg_done = 0;
++	}
++
++	sg_ix = host_priv->sg_ix;
++	if (sg_ix < sg_len) {
++		u32 irq_mask;
++		/* Set off next DMA if we've got the capacity */
++
++		if (data->flags & MMC_DATA_READ)
++			irq_mask = SDHCI_INT_DATA_AVAIL;
++		else
++			irq_mask = SDHCI_INT_SPACE_AVAIL;
++
++		/* We have to use the interrupt status register on the BCM2708
++		   rather than the SDHCI_PRESENT_STATE register because latency
++		   in the glue logic means that the information retrieved from
++		   the latter is not always up-to-date w.r.t the DMA engine -
++		   it may not indicate that a read or a write is ready yet */
++		if (sdhci_bcm2708_raw_readl(host, SDHCI_INT_STATUS) &
++		    irq_mask) {
++			size_t bytes = sg_dma_len(&sg[sg_ix]) -
++				       host_priv->sg_done;
++			dma_addr_t addr = sg_dma_address(&data->sg[sg_ix]) +
++					  host_priv->sg_done;
++
++			/* acknowledge interrupt */
++			sdhci_bcm2708_raw_writel(host, irq_mask,
++						 SDHCI_INT_STATUS);
++
++			BUG_ON(0 == bytes);
++
++			if (data->flags & MMC_DATA_READ)
++				sdhci_platdma_read(host, addr, bytes);
++			else
++				sdhci_platdma_write(host, addr, bytes);
++		} else {
++			DBG("PDMA - wait avail\n");
++			/* may generate an IRQ if already present */
++			sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL |
++						SDHCI_INT_SPACE_AVAIL);
++		}
++	} else {
++		if (sync_after_dma) {
++			/* On the Arasan controller the stop command (which will be
++			   scheduled after this completes) does not seem to work
++			   properly if we allow it to be issued when we are
++			   transferring data to/from the SD card.
++			   We get CRC and DEND errors unless we wait for
++			   the SD controller to finish reading/writing to the card. */
++			u32 state_mask;
++			int timeout=30*5000;
++
++			DBG("PDMA over - sync card\n");
++			if (data->flags & MMC_DATA_READ)
++				state_mask = SDHCI_DOING_READ;
++			else
++				state_mask = SDHCI_DOING_WRITE;
++
++			while (0 != (sdhci_bcm2708_raw_readl(host, SDHCI_PRESENT_STATE) 
++				& state_mask) && --timeout > 0)
++			{
++				udelay(1);
++				continue;
++			}
++			if (timeout <= 0)
++				printk(KERN_ERR"%s: final %s to SD card still "
++				       "running\n",
++				       mmc_hostname(host->mmc),
++				       data->flags & MMC_DATA_READ? "read": "write");
++		}
++		if (host_priv->complete) {
++			(*host_priv->complete)(host);
++			DBG("PDMA %s complete\n",
++			    data->flags & MMC_DATA_READ?"read":"write");
++			sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL |
++						SDHCI_INT_SPACE_AVAIL);
++		}
++	}
++//	spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static irqreturn_t sdhci_bcm2708_dma_irq(int irq, void *dev_id)
++{
++	irqreturn_t result = IRQ_NONE;
++	struct sdhci_host *host = dev_id;
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	u32 dma_cs; /* control and status register */
++
++	BUG_ON(NULL == dev_id);
++	BUG_ON(NULL == host_priv->dma_chan_base);
++
++	sdhci_spin_lock(host);
++
++	dma_cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS);
++
++	if (dma_cs & BCM2708_DMA_ERR) {
++		unsigned long debug;
++		debug = readl(host_priv->dma_chan_base +
++			      BCM2708_DMA_DEBUG);
++		printk(KERN_ERR "%s: DMA error - CS %lX DEBUG %lX\n",
++		       mmc_hostname(host->mmc), (unsigned long)dma_cs,
++		       (unsigned long)debug);
++		/* reset error */
++		writel(debug, host_priv->dma_chan_base +
++		       BCM2708_DMA_DEBUG);
++	}
++	if (dma_cs & BCM2708_DMA_INT) {
++		/* acknowledge interrupt */
++		writel(BCM2708_DMA_INT,
++		       host_priv->dma_chan_base + BCM2708_DMA_CS);
++
++		dsb(); /* ARM data synchronization (push) operation */
++
++		if (!host_priv->dma_wanted) {
++			/* ignore this interrupt - it was reset */
++			if (extra_messages)
++				printk(KERN_INFO "%s: DMA IRQ %X ignored - "
++			       "results were reset\n",
++			       mmc_hostname(host->mmc), dma_cs);
++#ifdef CHECK_DMA_USE
++			printk(KERN_INFO "%s: now %"FMT_HPT
++			       " started %lu reset %lu stopped %lu\n",
++			       mmc_hostname(host->mmc), hptime(),
++			       since_ns(host_priv->when_started),
++			       since_ns(host_priv->when_reset),
++			       since_ns(host_priv->when_stopped));
++			host_priv->dmas_pending--;
++#endif
++		} else
++			sdhci_bcm2708_dma_complete_irq(host, dma_cs);
++
++		result = IRQ_HANDLED;
++	}
++	sdhci_spin_unlock(host);
++
++	return result;
++}
++#endif /* CONFIG_MMC_SDHCI_BCM2708_DMA */
++
++
++/***************************************************************************** \
++ *									     *
++ * Device Attributes							     *
++ *									     *
++\*****************************************************************************/
++
++
++/**
++ * Show the DMA-using status
++ */
++static ssize_t attr_dma_show(struct device *_dev,
++			     struct device_attribute *attr, char *buf)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++		int use_dma = (host->flags & SDHCI_USE_PLATDMA? 1:0);
++		return sprintf(buf, "%d\n", use_dma);
++	} else
++		return -EINVAL;
++}
++
++/**
++ * Set the DMA-using status
++ */
++static ssize_t attr_dma_store(struct device *_dev,
++			      struct device_attribute *attr,
++			      const char *buf, size_t count)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++		int on = simple_strtol(buf, NULL, 0);
++		if (on) {
++			host->flags |= SDHCI_USE_PLATDMA;
++			sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
++			printk(KERN_INFO "%s: DMA enabled\n",
++			       mmc_hostname(host->mmc));
++		} else {
++			host->flags &= ~(SDHCI_USE_PLATDMA | SDHCI_REQ_USE_DMA);
++			sdhci_bcm2708_writel(host, 0, REG_EXRDFIFO_EN);
++			printk(KERN_INFO "%s: DMA disabled\n",
++			       mmc_hostname(host->mmc));
++		}
++#endif
++		return count;
++	} else
++		return -EINVAL;
++}
++
++static DEVICE_ATTR(use_dma, S_IRUGO | S_IWUGO, attr_dma_show, attr_dma_store);
++
++
++/**
++ * Show the DMA wait states used
++ */
++static ssize_t attr_dmawait_show(struct device *_dev,
++			         struct device_attribute *attr, char *buf)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++		struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++		int dmawait = host_priv->dma_waits;
++		return sprintf(buf, "%d\n", dmawait);
++	} else
++		return -EINVAL;
++}
++
++/**
++ * Set the DMA wait state used
++ */
++static ssize_t attr_dmawait_store(struct device *_dev,
++			          struct device_attribute *attr,
++    			          const char *buf, size_t count)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++		struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++		int dma_waits = simple_strtol(buf, NULL, 0);
++		if (dma_waits >= 0 && dma_waits < 32) 
++                        host_priv->dma_waits = dma_waits;
++		else
++			printk(KERN_ERR "%s: illegal dma_waits value - %d",
++			       mmc_hostname(host->mmc), dma_waits);
++#endif
++		return count;
++	} else
++		return -EINVAL;
++}
++
++static DEVICE_ATTR(dma_wait, S_IRUGO | S_IWUGO,
++                   attr_dmawait_show, attr_dmawait_store);
++
++
++/**
++ * Show the DMA-using status
++ */
++static ssize_t attr_status_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++		struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++		return sprintf(buf,
++			       "present: yes\n"
++			       "power: %s\n"
++			       "clock: %u Hz\n"
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++			       "dma: %s (%d waits)\n",
++#else
++			       "dma: unconfigured\n",
++#endif
++			       "always on",
++			       host->clock
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++			       , (host->flags & SDHCI_USE_PLATDMA)? "on": "off"
++                               , host_priv->dma_waits
++#endif
++			       );
++	} else
++		return -EINVAL;
++}
++
++static DEVICE_ATTR(status, S_IRUGO, attr_status_show, NULL);
++
++/***************************************************************************** \
++ *									     *
++ * Power Management							     *
++ *									     *
++\*****************************************************************************/
++
++
++#ifdef CONFIG_PM
++static int sdhci_bcm2708_suspend(struct platform_device *dev, pm_message_t state)
++{
++	struct sdhci_host *host = (struct sdhci_host *)
++				  platform_get_drvdata(dev);
++	int ret = 0;
++
++	if (host->mmc) {
++		ret = mmc_suspend_host(host->mmc);
++	}
++
++	return ret;
++}
++
++static int sdhci_bcm2708_resume(struct platform_device *dev)
++{
++	struct sdhci_host *host = (struct sdhci_host *)
++				  platform_get_drvdata(dev);
++	int ret = 0;
++
++	if (host->mmc) {
++		ret = mmc_resume_host(host->mmc);
++	}
++
++	return ret;
++}
++#endif
++
++
++/*****************************************************************************\
++ *                                                                           *
++ * Device quirk functions. Implemented as local ops because the flags        *
++ * field is out of space with newer kernels. This implementation can be      *
++ * back ported to older kernels as well.                                     *
++\****************************************************************************/
++static unsigned int sdhci_bcm2708_quirk_extra_ints(struct sdhci_host *host)
++{
++        return 1;
++}
++
++static unsigned int sdhci_bcm2708_quirk_spurious_crc_acmd51(struct sdhci_host *host)
++{
++        return 1;
++}
++
++static unsigned int sdhci_bcm2708_quirk_voltage_broken(struct sdhci_host *host)
++{
++        return 1;
++}
++
++static unsigned int sdhci_bcm2708_uhs_broken(struct sdhci_host *host)
++{
++        return 1;
++}
++
++static unsigned int sdhci_bcm2708_missing_status(struct sdhci_host *host)
++{
++	return 1;
++}
++
++/***************************************************************************** \
++ *									     *
++ * Device ops								     *
++ *									     *
++\*****************************************************************************/
++
++static struct sdhci_ops sdhci_bcm2708_ops = {
++#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
++	.read_l = sdhci_bcm2708_readl,
++	.read_w = sdhci_bcm2708_readw,
++	.read_b = sdhci_bcm2708_readb,
++	.write_l = sdhci_bcm2708_writel,
++	.write_w = sdhci_bcm2708_writew,
++	.write_b = sdhci_bcm2708_writeb,
++#else
++#error The BCM2708 SDHCI driver needs CONFIG_MMC_SDHCI_IO_ACCESSORS to be set
++#endif
++	.get_max_clock = sdhci_bcm2708_get_max_clock,
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	// Platform DMA operations
++	.pdma_able  = sdhci_bcm2708_platdma_dmaable,
++	.pdma_avail = sdhci_bcm2708_platdma_avail,
++	.pdma_reset = sdhci_bcm2708_platdma_reset,
++#endif
++	.extra_ints = sdhci_bcm2708_quirk_extra_ints,
++	.voltage_broken = sdhci_bcm2708_quirk_voltage_broken,
++	.uhs_broken = sdhci_bcm2708_uhs_broken,
++};
++
++/*****************************************************************************\
++ *									     *
++ * Device probing/removal						     *
++ *									     *
++\*****************************************************************************/
++
++static int sdhci_bcm2708_probe(struct platform_device *pdev)
++{
++	struct sdhci_host *host;
++	struct resource *iomem;
++	struct sdhci_bcm2708_priv *host_priv;
++	int ret;
++
++	BUG_ON(pdev == NULL);
++
++	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!iomem) {
++		ret = -ENOMEM;
++		goto err;
++	}
++
++	if (resource_size(iomem) != 0x100)
++		dev_err(&pdev->dev, "Invalid iomem size. You may "
++			"experience problems.\n");
++
++	if (pdev->dev.parent)
++		host = sdhci_alloc_host(pdev->dev.parent,
++					sizeof(struct sdhci_bcm2708_priv));
++	else
++		host = sdhci_alloc_host(&pdev->dev,
++					sizeof(struct sdhci_bcm2708_priv));
++
++	if (IS_ERR(host)) {
++		ret = PTR_ERR(host);
++		goto err;
++	}
++	if (missing_status) {
++		sdhci_bcm2708_ops.missing_status = sdhci_bcm2708_missing_status;
++	}
++
++	if( spurious_crc_acmd51 ) {
++		sdhci_bcm2708_ops.spurious_crc_acmd51 = sdhci_bcm2708_quirk_spurious_crc_acmd51;
++	}
++
++
++	printk("sdhci: %s low-latency mode\n",enable_llm?"Enable":"Disable");
++
++	host->hw_name = "BCM2708_Arasan";
++	host->ops = &sdhci_bcm2708_ops;
++	host->irq = platform_get_irq(pdev, 0);
++	host->second_irq = 0;
++
++	host->quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
++		       SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
++		       SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
++               SDHCI_QUIRK_MISSING_CAPS |
++               SDHCI_QUIRK_NO_HISPD_BIT |
++               (sync_after_dma ? 0:SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12);
++
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	host->flags = SDHCI_USE_PLATDMA;
++#endif
++
++	if (!request_mem_region(iomem->start, resource_size(iomem),
++				mmc_hostname(host->mmc))) {
++		dev_err(&pdev->dev, "cannot request region\n");
++		ret = -EBUSY;
++		goto err_request;
++	}
++
++	host->ioaddr = ioremap(iomem->start, resource_size(iomem));
++	if (!host->ioaddr) {
++		dev_err(&pdev->dev, "failed to remap registers\n");
++		ret = -ENOMEM;
++		goto err_remap;
++	}
++
++	host_priv = SDHCI_HOST_PRIV(host);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	host_priv->dma_wanted = 0;
++#ifdef CHECK_DMA_USE
++	host_priv->dmas_pending = 0;
++	host_priv->when_started = 0;
++	host_priv->when_reset = 0;
++	host_priv->when_stopped = 0;
++#endif
++	host_priv->sg_ix = 0;
++	host_priv->sg_done = 0;
++	host_priv->complete = NULL;
++	host_priv->dma_waits = SDHCI_BCM_DMA_WAITS;
++
++	host_priv->cb_base = dma_alloc_writecombine(&pdev->dev, SZ_4K,
++						    &host_priv->cb_handle,
++						    GFP_KERNEL);
++	if (!host_priv->cb_base) {
++		dev_err(&pdev->dev, "cannot allocate DMA CBs\n");
++		ret = -ENOMEM;
++		goto err_alloc_cb;
++	}
++
++	ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST,
++				 &host_priv->dma_chan_base,
++				 &host_priv->dma_irq);
++	if (ret < 0) {
++		dev_err(&pdev->dev, "couldn't allocate a DMA channel\n");
++		goto err_add_dma;
++	}
++	host_priv->dma_chan = ret;
++
++	ret = request_irq(host_priv->dma_irq, sdhci_bcm2708_dma_irq,0,//IRQF_SHARED,
++			  DRIVER_NAME " (dma)", host);
++	if (ret) {
++		dev_err(&pdev->dev, "cannot set DMA IRQ\n");
++		goto err_add_dma_irq;
++	}
++	host->second_irq = host_priv->dma_irq;
++	DBG("DMA CBs %p handle %08X DMA%d %p DMA IRQ %d\n",
++	    host_priv->cb_base, (unsigned)host_priv->cb_handle,
++	    host_priv->dma_chan, host_priv->dma_chan_base,
++	    host_priv->dma_irq);
++
++    if (allow_highspeed)
++        host->mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
++
++    /* single block writes cause data loss with some SD cards! */
++    host->mmc->caps2 |= MMC_CAP2_FORCE_MULTIBLOCK;
++#endif
++
++	ret = sdhci_add_host(host);
++	if (ret)
++		goto err_add_host;
++
++	platform_set_drvdata(pdev, host);
++	ret = device_create_file(&pdev->dev, &dev_attr_use_dma);
++	ret = device_create_file(&pdev->dev, &dev_attr_dma_wait);
++	ret = device_create_file(&pdev->dev, &dev_attr_status);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	/* enable extension fifo for paced DMA transfers */
++	sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
++	sdhci_bcm2708_writel(host, 4, REG_EXRDFIFO_CFG);
++#endif
++
++	printk(KERN_INFO "%s: BCM2708 SDHC host at 0x%08llx DMA %d IRQ %d\n",
++	       mmc_hostname(host->mmc), (unsigned long long)iomem->start,
++	       host_priv->dma_chan, host_priv->dma_irq);
++
++	return 0;
++
++err_add_host:
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	free_irq(host_priv->dma_irq, host);
++err_add_dma_irq:
++	bcm_dma_chan_free(host_priv->dma_chan);
++err_add_dma:
++	dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base,
++			      host_priv->cb_handle);
++err_alloc_cb:
++#endif
++	iounmap(host->ioaddr);
++err_remap:
++	release_mem_region(iomem->start, resource_size(iomem));
++err_request:
++	sdhci_free_host(host);
++err:
++	dev_err(&pdev->dev, "probe failed, err %d\n", ret);
++	return ret;
++}
++
++static int sdhci_bcm2708_remove(struct platform_device *pdev)
++{
++	struct sdhci_host *host = platform_get_drvdata(pdev);
++	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	int dead;
++	u32 scratch;
++
++	dead = 0;
++	scratch = sdhci_bcm2708_readl(host, SDHCI_INT_STATUS);
++	if (scratch == (u32)-1)
++		dead = 1;
++
++	device_remove_file(&pdev->dev, &dev_attr_status);
++	device_remove_file(&pdev->dev, &dev_attr_dma_wait);
++	device_remove_file(&pdev->dev, &dev_attr_use_dma);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	free_irq(host_priv->dma_irq, host);
++	dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base,
++			      host_priv->cb_handle);
++#endif
++	sdhci_remove_host(host, dead);
++	iounmap(host->ioaddr);
++	release_mem_region(iomem->start, resource_size(iomem));
++	sdhci_free_host(host);
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static struct platform_driver sdhci_bcm2708_driver = {
++	.driver = {
++		.name	= DRIVER_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= sdhci_bcm2708_probe,
++	.remove		= sdhci_bcm2708_remove,
++
++#ifdef CONFIG_PM
++	.suspend = sdhci_bcm2708_suspend,
++	.resume = sdhci_bcm2708_resume,
++#endif
++
++};
++
++/*****************************************************************************\
++ *									     *
++ * Driver init/exit							     *
++ *									     *
++\*****************************************************************************/
++
++static int __init sdhci_drv_init(void)
++{
++	return platform_driver_register(&sdhci_bcm2708_driver);
++}
++
++static void __exit sdhci_drv_exit(void)
++{
++	platform_driver_unregister(&sdhci_bcm2708_driver);
++}
++
++module_init(sdhci_drv_init);
++module_exit(sdhci_drv_exit);
++
++module_param(allow_highspeed, bool, 0444);
++module_param(emmc_clock_freq, int, 0444);
++module_param(sync_after_dma, bool, 0444);
++module_param(missing_status, bool, 0444);
++module_param(spurious_crc_acmd51, bool, 0444);
++module_param(enable_llm, bool, 0444);
++module_param(cycle_delay, int, 0444);
++module_param(extra_messages, bool, 0444);
++
++MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
++MODULE_AUTHOR("Broadcom <info@broadcom.com>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:"DRIVER_NAME);
++
++MODULE_PARM_DESC(allow_highspeed, "Allow high speed transfers modes");
++MODULE_PARM_DESC(emmc_clock_freq, "Specify the speed of emmc clock");
++MODULE_PARM_DESC(sync_after_dma, "Block in driver until dma complete");
++MODULE_PARM_DESC(missing_status, "Use the missing status quirk");
++MODULE_PARM_DESC(spurious_crc_acmd51, "Use the spurious crc quirk for reading SCR (ACMD51)");
++MODULE_PARM_DESC(enable_llm, "Enable low-latency mode");
++MODULE_PARM_DESC(extra_messages, "Enable more sdcard warning messages");
++
++
+diff -urwN linux-3.10/drivers/mmc/host/sdhci.c linux-rpi-3.10.y/drivers/mmc/host/sdhci.c
+--- linux-3.10/drivers/mmc/host/sdhci.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/sdhci.c	2013-07-06 15:25:50.000000000 +0100
+@@ -28,6 +28,7 @@
+ #include <linux/mmc/mmc.h>
+ #include <linux/mmc/host.h>
+ #include <linux/mmc/card.h>
++#include <linux/mmc/sd.h>
+ #include <linux/mmc/slot-gpio.h>
+ 
+ #include "sdhci.h"
+@@ -123,6 +124,91 @@
+  * Low level functions                                                       *
+  *                                                                           *
+ \*****************************************************************************/
++extern bool enable_llm;
++static int sdhci_locked=0;
++void sdhci_spin_lock(struct sdhci_host *host)
++{
++	spin_lock(&host->lock);
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		disable_irq_nosync(host->irq);
++		if(host->second_irq)
++			disable_irq_nosync(host->second_irq);
++		local_irq_enable();
++	}
++#endif
++}
++
++void sdhci_spin_unlock(struct sdhci_host *host)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		local_irq_disable();
++		if(host->second_irq)
++			enable_irq(host->second_irq);
++		enable_irq(host->irq);
++	}
++#endif
++	spin_unlock(&host->lock);
++}
++
++void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		while(sdhci_locked)
++		{
++			preempt_schedule();
++		}
++		spin_lock_irqsave(&host->lock,*flags);
++		disable_irq(host->irq);
++		if(host->second_irq)
++			disable_irq(host->second_irq);
++		local_irq_enable();
++	}
++	else
++#endif
++		spin_lock_irqsave(&host->lock,*flags);
++}
++
++void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		local_irq_disable();
++		if(host->second_irq)
++			enable_irq(host->second_irq);
++		enable_irq(host->irq);
++	}
++#endif
++	spin_unlock_irqrestore(&host->lock,flags);
++}
++
++static void sdhci_spin_enable_schedule(struct sdhci_host *host)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		sdhci_locked = 1;
++		preempt_enable();
++	}
++#endif
++}
++
++static void sdhci_spin_disable_schedule(struct sdhci_host *host)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		preempt_disable();
++		sdhci_locked = 0;
++	}
++#endif
++}
+ 
+ static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
+ {
+@@ -288,7 +374,7 @@
+ 	struct sdhci_host *host = container_of(led, struct sdhci_host, led);
+ 	unsigned long flags;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	if (host->runtime_suspended)
+ 		goto out;
+@@ -298,7 +384,7 @@
+ 	else
+ 		sdhci_activate_led(host);
+ out:
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ #endif
+ 
+@@ -315,7 +401,7 @@
+ 	u32 uninitialized_var(scratch);
+ 	u8 *buf;
+ 
+-	DBG("PIO reading\n");
++	DBG("PIO reading %db\n", host->data->blksz);
+ 
+ 	blksize = host->data->blksz;
+ 	chunk = 0;
+@@ -360,7 +446,7 @@
+ 	u32 scratch;
+ 	u8 *buf;
+ 
+-	DBG("PIO writing\n");
++	DBG("PIO writing %db\n", host->data->blksz);
+ 
+ 	blksize = host->data->blksz;
+ 	chunk = 0;
+@@ -399,19 +485,28 @@
+ 	local_irq_restore(flags);
+ }
+ 
+-static void sdhci_transfer_pio(struct sdhci_host *host)
++static void sdhci_transfer_pio(struct sdhci_host *host, u32 intstate)
+ {
+ 	u32 mask;
++	u32 state = 0;
++	u32 intmask;
++	int available;
+ 
+ 	BUG_ON(!host->data);
+ 
+ 	if (host->blocks == 0)
+ 		return;
+ 
+-	if (host->data->flags & MMC_DATA_READ)
++	if (host->data->flags & MMC_DATA_READ) {
+ 		mask = SDHCI_DATA_AVAILABLE;
+-	else
++		intmask = SDHCI_INT_DATA_AVAIL;
++	} else {
+ 		mask = SDHCI_SPACE_AVAILABLE;
++		intmask = SDHCI_INT_SPACE_AVAIL;
++	}
++
++	/* initially we can see whether we can procede using intstate */
++	available = (intstate & intmask);
+ 
+ 	/*
+ 	 * Some controllers (JMicron JMB38x) mess up the buffer bits
+@@ -422,7 +517,7 @@
+ 		(host->data->blocks == 1))
+ 		mask = ~0;
+ 
+-	while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
++	while (available) {
+ 		if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
+ 			udelay(100);
+ 
+@@ -434,9 +529,11 @@
+ 		host->blocks--;
+ 		if (host->blocks == 0)
+ 			break;
++		state = sdhci_readl(host, SDHCI_PRESENT_STATE);
++		available = state & mask;
+ 	}
+ 
+-	DBG("PIO transfer complete.\n");
++	DBG("PIO transfer complete - %d blocks left.\n", host->blocks);
+ }
+ 
+ static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
+@@ -709,7 +806,9 @@
+ 	u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
+ 	u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
+ 
+-	if (host->flags & SDHCI_REQ_USE_DMA)
++	/* platform DMA will begin on receipt of PIO irqs */
++	if ((host->flags & SDHCI_REQ_USE_DMA) &&
++	    !(host->flags & SDHCI_USE_PLATDMA))
+ 		sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
+ 	else
+ 		sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
+@@ -741,44 +840,25 @@
+ 	host->data_early = 0;
+ 	host->data->bytes_xfered = 0;
+ 
+-	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
++	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | SDHCI_USE_PLATDMA))
+ 		host->flags |= SDHCI_REQ_USE_DMA;
+ 
+ 	/*
+ 	 * FIXME: This doesn't account for merging when mapping the
+ 	 * scatterlist.
+ 	 */
+-	if (host->flags & SDHCI_REQ_USE_DMA) {
+-		int broken, i;
+-		struct scatterlist *sg;
+-
+-		broken = 0;
+-		if (host->flags & SDHCI_USE_ADMA) {
+-			if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+-				broken = 1;
+-		} else {
+-			if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
+-				broken = 1;
+-		}
+-
+-		if (unlikely(broken)) {
+-			for_each_sg(data->sg, sg, data->sg_len, i) {
+-				if (sg->length & 0x3) {
+-					DBG("Reverting to PIO because of "
+-						"transfer size (%d)\n",
+-						sg->length);
+-					host->flags &= ~SDHCI_REQ_USE_DMA;
+-					break;
+-				}
+-			}
+-		}
+-	}
+ 
+ 	/*
+ 	 * The assumption here being that alignment is the same after
+ 	 * translation to device address space.
+ 	 */
+-	if (host->flags & SDHCI_REQ_USE_DMA) {
++	if ((host->flags & (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) ==
++	    (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) {
++		
++		if (! sdhci_platdma_dmaable(host, data))
++			host->flags &= ~SDHCI_REQ_USE_DMA;
++
++	} else if (host->flags & SDHCI_REQ_USE_DMA) {
+ 		int broken, i;
+ 		struct scatterlist *sg;
+ 
+@@ -837,7 +917,8 @@
+ 				 */
+ 				WARN_ON(1);
+ 				host->flags &= ~SDHCI_REQ_USE_DMA;
+-			} else {
++			} else 
++			if (!(host->flags & SDHCI_USE_PLATDMA)) {
+ 				WARN_ON(sg_cnt != 1);
+ 				sdhci_writel(host, sg_dma_address(data->sg),
+ 					SDHCI_DMA_ADDRESS);
+@@ -853,11 +934,13 @@
+ 	if (host->version >= SDHCI_SPEC_200) {
+ 		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ 		ctrl &= ~SDHCI_CTRL_DMA_MASK;
++		if (! (host->flags & SDHCI_USE_PLATDMA)) {
+ 		if ((host->flags & SDHCI_REQ_USE_DMA) &&
+ 			(host->flags & SDHCI_USE_ADMA))
+ 			ctrl |= SDHCI_CTRL_ADMA32;
+ 		else
+ 			ctrl |= SDHCI_CTRL_SDMA;
++		}
+ 		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ 	}
+ 
+@@ -909,7 +992,8 @@
+ 
+ 	if (data->flags & MMC_DATA_READ)
+ 		mode |= SDHCI_TRNS_READ;
+-	if (host->flags & SDHCI_REQ_USE_DMA)
++	if ((host->flags & SDHCI_REQ_USE_DMA) &&
++	    !(host->flags & SDHCI_USE_PLATDMA))
+ 		mode |= SDHCI_TRNS_DMA;
+ 
+ 	sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
+@@ -925,13 +1009,16 @@
+ 	host->data = NULL;
+ 
+ 	if (host->flags & SDHCI_REQ_USE_DMA) {
+-		if (host->flags & SDHCI_USE_ADMA)
+-			sdhci_adma_table_post(host, data);
+-		else {
++		/* we may have to abandon an ongoing platform DMA */
++		if (host->flags & SDHCI_USE_PLATDMA)
++			sdhci_platdma_reset(host, data);
++
++		if (host->flags & (SDHCI_USE_PLATDMA | SDHCI_USE_SDMA)) {
+ 			dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ 				data->sg_len, (data->flags & MMC_DATA_READ) ?
+ 					DMA_FROM_DEVICE : DMA_TO_DEVICE);
+-		}
++		} else if (host->flags & SDHCI_USE_ADMA)
++                        sdhci_adma_table_post(host, data);
+ 	}
+ 
+ 	/*
+@@ -984,6 +1071,12 @@
+ 	if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
+ 		mask |= SDHCI_DATA_INHIBIT;
+ 
++	if(host->ops->missing_status && (cmd->opcode == MMC_SEND_STATUS)) {
++		timeout = 5000; // Really obscenely large delay to send the status, due to bug in controller
++				// which might cause the STATUS command to get stuck when a data operation is in flow
++		mask |= SDHCI_DATA_INHIBIT;
++	}
++
+ 	/* We shouldn't wait for data inihibit for stop commands, even
+ 	   though they might use busy signaling */
+ 	if (host->mrq->data && (cmd == host->mrq->data->stop))
+@@ -999,12 +1092,20 @@
+ 			return;
+ 		}
+ 		timeout--;
++		sdhci_spin_enable_schedule(host);
+ 		mdelay(1);
++		sdhci_spin_disable_schedule(host);
+ 	}
++	DBG("send cmd %d - wait 0x%X irq 0x%x\n", cmd->opcode, mask,
++	    sdhci_readl(host, SDHCI_INT_STATUS));
+ 
+ 	mod_timer(&host->timer, jiffies + 10 * HZ);
+ 
+ 	host->cmd = cmd;
++	if (host->last_cmdop == MMC_APP_CMD)
++		host->last_cmdop = -cmd->opcode;
++	else
++		host->last_cmdop = cmd->opcode;
+ 
+ 	sdhci_prepare_data(host, cmd);
+ 
+@@ -1220,7 +1321,9 @@
+ 			return;
+ 		}
+ 		timeout--;
++		sdhci_spin_enable_schedule(host);
+ 		mdelay(1);
++		sdhci_spin_disable_schedule(host);
+ 	}
+ 
+ 	clk |= SDHCI_CLOCK_CARD_EN;
+@@ -1316,7 +1419,7 @@
+ 
+ 	sdhci_runtime_pm_get(host);
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	WARN_ON(host->mrq != NULL);
+ 
+@@ -1374,9 +1477,9 @@
+ 					mmc->card->type == MMC_TYPE_MMC ?
+ 					MMC_SEND_TUNING_BLOCK_HS200 :
+ 					MMC_SEND_TUNING_BLOCK;
+-				spin_unlock_irqrestore(&host->lock, flags);
++				sdhci_spin_unlock_irqrestore(host, flags);
+ 				sdhci_execute_tuning(mmc, tuning_opcode);
+-				spin_lock_irqsave(&host->lock, flags);
++				sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 				/* Restore original mmc_request structure */
+ 				host->mrq = mrq;
+@@ -1390,7 +1493,7 @@
+ 	}
+ 
+ 	mmiowb();
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
+@@ -1399,10 +1502,10 @@
+ 	int vdd_bit = -1;
+ 	u8 ctrl;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	if (host->flags & SDHCI_DEVICE_DEAD) {
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 		if (host->vmmc && ios->power_mode == MMC_POWER_OFF)
+ 			mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
+ 		return;
+@@ -1429,9 +1532,9 @@
+ 		vdd_bit = sdhci_set_power(host, ios->vdd);
+ 
+ 	if (host->vmmc && vdd_bit != -1) {
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 		mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit);
+-		spin_lock_irqsave(&host->lock, flags);
++		sdhci_spin_lock_irqsave(host, &flags);
+ 	}
+ 
+ 	if (host->ops->platform_send_init_74_clocks)
+@@ -1470,7 +1573,7 @@
+ 	else
+ 		ctrl &= ~SDHCI_CTRL_HISPD;
+ 
+-	if (host->version >= SDHCI_SPEC_300) {
++	if (host->version >= SDHCI_SPEC_300 && !(host->ops->uhs_broken)) {
+ 		u16 clk, ctrl_2;
+ 
+ 		/* In case of UHS-I modes, set High Speed Enable */
+@@ -1569,7 +1672,7 @@
+ 		sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+ 
+ 	mmiowb();
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+@@ -1617,7 +1720,7 @@
+ 	unsigned long flags;
+ 	int is_readonly;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	if (host->flags & SDHCI_DEVICE_DEAD)
+ 		is_readonly = 0;
+@@ -1627,7 +1730,7 @@
+ 		is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
+ 				& SDHCI_WRITE_PROTECT);
+ 
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	/* This quirk needs to be replaced by a callback-function later */
+ 	return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
+@@ -1700,9 +1803,9 @@
+ 	struct sdhci_host *host = mmc_priv(mmc);
+ 	unsigned long flags;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 	sdhci_enable_sdio_irq_nolock(host, enable);
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
+@@ -2046,7 +2149,7 @@
+ 	struct sdhci_host *host = mmc_priv(mmc);
+ 	unsigned long flags;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	/* Check host->mrq first in case we are runtime suspended */
+ 	if (host->mrq &&
+@@ -2063,7 +2166,7 @@
+ 		tasklet_schedule(&host->finish_tasklet);
+ 	}
+ 
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static const struct mmc_host_ops sdhci_ops = {
+@@ -2102,14 +2205,14 @@
+ 
+ 	host = (struct sdhci_host*)param;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+         /*
+          * If this tasklet gets rescheduled while running, it will
+          * be run again afterwards but without any active request.
+          */
+ 	if (!host->mrq) {
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 		return;
+ 	}
+ 
+@@ -2147,7 +2250,7 @@
+ #endif
+ 
+ 	mmiowb();
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	mmc_request_done(host->mmc, mrq);
+ 	sdhci_runtime_pm_put(host);
+@@ -2160,11 +2263,11 @@
+ 
+ 	host = (struct sdhci_host*)data;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	if (host->mrq) {
+ 		pr_err("%s: Timeout waiting for hardware "
+-			"interrupt.\n", mmc_hostname(host->mmc));
++			"interrupt - cmd%d.\n", mmc_hostname(host->mmc), host->last_cmdop);
+ 		sdhci_dumpregs(host);
+ 
+ 		if (host->data) {
+@@ -2181,7 +2284,7 @@
+ 	}
+ 
+ 	mmiowb();
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static void sdhci_tuning_timer(unsigned long data)
+@@ -2191,11 +2294,11 @@
+ 
+ 	host = (struct sdhci_host *)data;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	host->flags |= SDHCI_NEEDS_RETUNING;
+ 
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ /*****************************************************************************\
+@@ -2209,10 +2312,13 @@
+ 	BUG_ON(intmask == 0);
+ 
+ 	if (!host->cmd) {
++		if (!(host->ops->extra_ints)) {
+ 		pr_err("%s: Got command interrupt 0x%08x even "
+ 			"though no command operation was in progress.\n",
+ 			mmc_hostname(host->mmc), (unsigned)intmask);
+ 		sdhci_dumpregs(host);
++		} else
++			DBG("cmd irq 0x%08x cmd complete\n", (unsigned)intmask);
+ 		return;
+ 	}
+ 
+@@ -2282,6 +2388,19 @@
+ static void sdhci_show_adma_error(struct sdhci_host *host) { }
+ #endif
+ 
++static void sdhci_data_end(struct sdhci_host *host)
++{
++	if (host->cmd) {
++		/*
++		 * Data managed to finish before the
++		 * command completed. Make sure we do
++		 * things in the proper order.
++		 */
++		host->data_early = 1;
++	} else 
++		sdhci_finish_data(host);
++}
++
+ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
+ {
+ 	u32 command;
+@@ -2311,23 +2430,39 @@
+ 			}
+ 		}
+ 
++		if (!(host->ops->extra_ints)) {
+ 		pr_err("%s: Got data interrupt 0x%08x even "
+ 			"though no data operation was in progress.\n",
+ 			mmc_hostname(host->mmc), (unsigned)intmask);
+ 		sdhci_dumpregs(host);
++		} else
++			DBG("data irq 0x%08x but no data\n", (unsigned)intmask);
+ 
+ 		return;
+ 	}
+ 
+ 	if (intmask & SDHCI_INT_DATA_TIMEOUT)
+ 		host->data->error = -ETIMEDOUT;
+-	else if (intmask & SDHCI_INT_DATA_END_BIT)
++	else if (intmask & SDHCI_INT_DATA_END_BIT) {
++		DBG("end error in cmd %d\n", host->last_cmdop);
++		if (host->ops->spurious_crc_acmd51 &&
++		    host->last_cmdop == -SD_APP_SEND_SCR) {
++			DBG("ignoring spurious data_end_bit error\n");
++			intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END;
++		} else
+ 		host->data->error = -EILSEQ;
+-	else if ((intmask & SDHCI_INT_DATA_CRC) &&
++	} else if ((intmask & SDHCI_INT_DATA_CRC) &&
+ 		SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
+-			!= MMC_BUS_TEST_R)
++			!= MMC_BUS_TEST_R) {
++		DBG("crc error in cmd %d\n", host->last_cmdop);
++		if (host->ops->spurious_crc_acmd51 &&
++				host->last_cmdop == -SD_APP_SEND_SCR) {
++			DBG("ignoring spurious data_crc_bit error\n");
++			intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END;
++		} else {
+ 		host->data->error = -EILSEQ;
+-	else if (intmask & SDHCI_INT_ADMA_ERROR) {
++		}
++	} else if (intmask & SDHCI_INT_ADMA_ERROR) {
+ 		pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
+ 		sdhci_show_adma_error(host);
+ 		host->data->error = -EIO;
+@@ -2335,11 +2470,18 @@
+ 			host->ops->adma_workaround(host, intmask);
+ 	}
+ 
+-	if (host->data->error)
++	if (host->data->error) {
++		DBG("finish request early on error %d\n", host->data->error);
+ 		sdhci_finish_data(host);
+-	else {
+-		if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
+-			sdhci_transfer_pio(host);
++	} else {
++		if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) {
++			if (host->flags & SDHCI_REQ_USE_DMA) {
++				/* possible only in PLATDMA mode */
++				sdhci_platdma_avail(host, &intmask,
++						&sdhci_data_end);
++			} else
++				sdhci_transfer_pio(host, intmask);
++		}
+ 
+ 		/*
+ 		 * We currently don't do anything fancy with DMA
+@@ -2368,18 +2510,8 @@
+ 			sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+ 		}
+ 
+-		if (intmask & SDHCI_INT_DATA_END) {
+-			if (host->cmd) {
+-				/*
+-				 * Data managed to finish before the
+-				 * command completed. Make sure we do
+-				 * things in the proper order.
+-				 */
+-				host->data_early = 1;
+-			} else {
+-				sdhci_finish_data(host);
+-			}
+-		}
++		if (intmask & SDHCI_INT_DATA_END)
++			sdhci_data_end(host);
+ 	}
+ }
+ 
+@@ -2390,10 +2522,10 @@
+ 	u32 intmask, unexpected = 0;
+ 	int cardint = 0, max_loops = 16;
+ 
+-	spin_lock(&host->lock);
++	sdhci_spin_lock(host);
+ 
+ 	if (host->runtime_suspended) {
+-		spin_unlock(&host->lock);
++		sdhci_spin_unlock(host);
+ 		pr_warning("%s: got irq while runtime suspended\n",
+ 		       mmc_hostname(host->mmc));
+ 		return IRQ_HANDLED;
+@@ -2435,6 +2567,22 @@
+ 		tasklet_schedule(&host->card_tasklet);
+ 	}
+ 
++	if (intmask & SDHCI_INT_ERROR_MASK & ~SDHCI_INT_ERROR)
++		DBG("controller reports error 0x%x -"
++				"%s%s%s%s%s%s%s%s%s%s",
++				intmask,
++				intmask & SDHCI_INT_TIMEOUT? " timeout": "",
++				intmask & SDHCI_INT_CRC     ? " crc": "",
++				intmask & SDHCI_INT_END_BIT? " endbit": "",
++				intmask & SDHCI_INT_INDEX? " index": "",
++				intmask & SDHCI_INT_DATA_TIMEOUT? " data_timeout": "",
++				intmask & SDHCI_INT_DATA_CRC? " data_crc": "",
++				intmask & SDHCI_INT_DATA_END_BIT? " data_endbit": "",
++				intmask & SDHCI_INT_BUS_POWER? " buspower": "",
++				intmask & SDHCI_INT_ACMD12ERR? " acmd12": "",
++				intmask & SDHCI_INT_ADMA_ERROR? " adma": ""
++		   );
++
+ 	if (intmask & SDHCI_INT_CMD_MASK) {
+ 		sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
+ 			SDHCI_INT_STATUS);
+@@ -2449,7 +2597,13 @@
+ 
+ 	intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
+ 
+-	intmask &= ~SDHCI_INT_ERROR;
++	if (intmask & SDHCI_INT_ERROR_MASK) {
++		/* collect any uncovered errors */
++		sdhci_writel(host, intmask & SDHCI_INT_ERROR_MASK,
++				SDHCI_INT_STATUS);
++	}
++
++	intmask &= ~SDHCI_INT_ERROR_MASK;
+ 
+ 	if (intmask & SDHCI_INT_BUS_POWER) {
+ 		pr_err("%s: Card is consuming too much power!\n",
+@@ -2475,7 +2629,7 @@
+ 	if (intmask && --max_loops)
+ 		goto again;
+ out:
+-	spin_unlock(&host->lock);
++	sdhci_spin_unlock(host);
+ 
+ 	if (unexpected) {
+ 		pr_err("%s: Unexpected interrupt 0x%08x.\n",
+@@ -2569,7 +2723,8 @@
+ {
+ 	int ret;
+ 
+-	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
++	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | 
++			   SDHCI_USE_PLATDMA)) {
+ 		if (host->ops->enable_dma)
+ 			host->ops->enable_dma(host);
+ 	}
+@@ -2636,15 +2791,15 @@
+ 		host->flags &= ~SDHCI_NEEDS_RETUNING;
+ 	}
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 	sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	synchronize_irq(host->irq);
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 	host->runtime_suspended = true;
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	return ret;
+ }
+@@ -2670,16 +2825,16 @@
+ 	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
+ 	if ((host_flags & SDHCI_PV_ENABLED) &&
+ 		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
+-		spin_lock_irqsave(&host->lock, flags);
++		sdhci_spin_lock_irqsave(host, &flags);
+ 		sdhci_enable_preset_value(host, true);
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 	}
+ 
+ 	/* Set the re-tuning expiration flag */
+ 	if (host->flags & SDHCI_USING_RETUNING_TIMER)
+ 		host->flags |= SDHCI_NEEDS_RETUNING;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	host->runtime_suspended = false;
+ 
+@@ -2690,7 +2845,7 @@
+ 	/* Enable Card Detection */
+ 	sdhci_enable_card_detection(host);
+ 
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	return ret;
+ }
+@@ -2785,14 +2940,16 @@
+ 		host->flags &= ~SDHCI_USE_ADMA;
+ 	}
+ 
+-	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
++	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | 
++			   SDHCI_USE_PLATDMA)) {
+ 		if (host->ops->enable_dma) {
+ 			if (host->ops->enable_dma(host)) {
+ 				pr_warning("%s: No suitable DMA "
+ 					"available. Falling back to PIO.\n",
+ 					mmc_hostname(mmc));
+ 				host->flags &=
+-					~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
++					~(SDHCI_USE_SDMA | SDHCI_USE_ADMA |
++					  SDHCI_USE_PLATDMA);
+ 			}
+ 		}
+ 	}
+@@ -3080,6 +3237,12 @@
+ 				   SDHCI_MAX_CURRENT_MULTIPLIER;
+ 	}
+ 
++	if(host->ops->voltage_broken) {
++		ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
++		// Cannot support UHS modes if we are stuck at 3.3V;
++		mmc->caps &= ~(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50);
++	}
++
+ 	mmc->ocr_avail = ocr_avail;
+ 	mmc->ocr_avail_sdio = ocr_avail;
+ 	if (host->ocr_avail_sdio)
+@@ -3174,7 +3337,7 @@
+ 		host->tuning_timer.function = sdhci_tuning_timer;
+ 	}
+ 
+-	ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
++	ret = request_irq(host->irq, sdhci_irq, 0,//IRQF_SHARED,
+ 		mmc_hostname(mmc), host);
+ 	if (ret) {
+ 		pr_err("%s: Failed to request IRQ %d: %d\n",
+@@ -3210,6 +3373,7 @@
+ 
+ 	pr_info("%s: SDHCI controller on %s [%s] using %s\n",
+ 		mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
++		(host->flags & SDHCI_USE_PLATDMA) ? "platform's DMA" :
+ 		(host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ 		(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
+ 
+@@ -3237,7 +3401,7 @@
+ 	unsigned long flags;
+ 
+ 	if (dead) {
+-		spin_lock_irqsave(&host->lock, flags);
++		sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 		host->flags |= SDHCI_DEVICE_DEAD;
+ 
+@@ -3249,7 +3413,7 @@
+ 			tasklet_schedule(&host->finish_tasklet);
+ 		}
+ 
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 	}
+ 
+ 	sdhci_disable_card_detection(host);
+diff -urwN linux-3.10/drivers/mmc/host/sdhci.h linux-rpi-3.10.y/drivers/mmc/host/sdhci.h
+--- linux-3.10/drivers/mmc/host/sdhci.h	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/mmc/host/sdhci.h	2013-07-06 15:25:50.000000000 +0100
+@@ -289,6 +289,20 @@
+ 	void	(*platform_reset_enter)(struct sdhci_host *host, u8 mask);
+ 	void	(*platform_reset_exit)(struct sdhci_host *host, u8 mask);
+ 	int	(*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
++
++	int             (*pdma_able)(struct sdhci_host *host,
++				     struct mmc_data *data);
++	void            (*pdma_avail)(struct sdhci_host *host,
++				      unsigned int *ref_intmask,
++				      void(*complete)(struct sdhci_host *));
++	void            (*pdma_reset)(struct sdhci_host *host,
++				      struct mmc_data *data);
++	unsigned int 	(*extra_ints)(struct sdhci_host *host);
++	unsigned int	(*spurious_crc_acmd51)(struct sdhci_host *host);
++	unsigned int	(*voltage_broken)(struct sdhci_host *host);
++	unsigned int	(*uhs_broken)(struct sdhci_host *host);
++	unsigned int	(*missing_status)(struct sdhci_host *host);
++
+ 	void	(*hw_reset)(struct sdhci_host *host);
+ 	void	(*platform_suspend)(struct sdhci_host *host);
+ 	void	(*platform_resume)(struct sdhci_host *host);
+@@ -399,9 +413,38 @@
+ extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
+ #endif
+ 
++static inline int /*bool*/
++sdhci_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data)
++{
++	if (host->ops->pdma_able)
++		return host->ops->pdma_able(host, data);
++	else
++		return 1;
++}
++static inline void
++sdhci_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask,
++		void(*completion_callback)(struct sdhci_host *))
++{
++	if (host->ops->pdma_avail)
++		host->ops->pdma_avail(host, ref_intmask, completion_callback);
++}
++
++static inline void
++sdhci_platdma_reset(struct sdhci_host *host, struct mmc_data *data)
++{
++	if (host->ops->pdma_reset)
++		host->ops->pdma_reset(host, data);
++}
++   
+ #ifdef CONFIG_PM_RUNTIME
+ extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
+ extern int sdhci_runtime_resume_host(struct sdhci_host *host);
+ #endif
+ 
++extern void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags);
++extern void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags);
++extern void sdhci_spin_lock(struct sdhci_host *host);
++extern void sdhci_spin_unlock(struct sdhci_host *host);
++
++
+ #endif /* __SDHCI_HW_H */
+diff -urN linux-3.10/include/linux/mmc/host.h linux-rpi-3.10.y/include/linux/mmc/host.h
+--- linux-3.10/include/linux/mmc/host.h	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/include/linux/mmc/host.h	2013-07-06 15:25:50.000000000 +0100
+@@ -281,6 +281,7 @@
+ #define MMC_CAP2_PACKED_CMD	(MMC_CAP2_PACKED_RD | \
+ 				 MMC_CAP2_PACKED_WR)
+ #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14)	/* Don't power up before scan */
++#define MMC_CAP2_FORCE_MULTIBLOCK (1 << 31)	/* Always use multiblock transfers */
+ 
+ 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
+ 
+diff -urN linux-3.10/include/linux/mmc/sdhci.h linux-rpi-3.10.y/include/linux/mmc/sdhci.h
+--- linux-3.10/include/linux/mmc/sdhci.h	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/include/linux/mmc/sdhci.h	2013-07-06 15:25:50.000000000 +0100
+@@ -97,6 +97,7 @@
+ #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN		(1<<3)
+ 
+ 	int irq;		/* Device IRQ */
++	int second_irq; 	/* Additional IRQ to disable/enable in low-latency mode */
+ 	void __iomem *ioaddr;	/* Mapped address */
+ 
+ 	const struct sdhci_ops *ops;	/* Low level hw interface */
+@@ -128,6 +129,7 @@
+ #define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
+ #define SDHCI_HS200_NEEDS_TUNING (1<<10)	/* HS200 needs tuning */
+ #define SDHCI_USING_RETUNING_TIMER (1<<11)	/* Host is using a retuning timer for the card */
++#define SDHCI_USE_PLATDMA       (1<<12) /* Host uses 3rd party DMA */
+ 
+ 	unsigned int version;	/* SDHCI spec. version */
+ 
+@@ -142,6 +144,7 @@
+ 
+ 	struct mmc_request *mrq;	/* Current request */
+ 	struct mmc_command *cmd;	/* Current command */
++	int	last_cmdop;	/* Opcode of last cmd sent */
+ 	struct mmc_data *data;	/* Current data request */
+ 	unsigned int data_early:1;	/* Data finished before cmd */
+ 
diff --git a/target/linux/brcm2708/patches-3.10/015-bcm2708-i2c-driver.patch b/target/linux/brcm2708/patches-3.10/015-bcm2708-i2c-driver.patch
new file mode 100644
index 0000000000..531ae6989e
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/015-bcm2708-i2c-driver.patch
@@ -0,0 +1,452 @@
+diff -urN linux-3.10/drivers/i2c/busses/i2c-bcm2708.c linux-rpi-3.10.y/drivers/i2c/busses/i2c-bcm2708.c
+--- linux-3.10/drivers/i2c/busses/i2c-bcm2708.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-rpi-3.10.y/drivers/i2c/busses/i2c-bcm2708.c	2013-07-06 15:25:50.000000000 +0100
+@@ -0,0 +1,408 @@
++/*
++ * Driver for Broadcom BCM2708 BSC Controllers
++ *
++ * Copyright (C) 2012 Chris Boot & Frank Buss
++ *
++ * This driver is inspired by:
++ * i2c-ocores.c, by Peter Korsgaard <jacmet@sunsite.dk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++#include <linux/wait.h>
++
++/* BSC register offsets */
++#define BSC_C			0x00
++#define BSC_S			0x04
++#define BSC_DLEN		0x08
++#define BSC_A			0x0c
++#define BSC_FIFO		0x10
++#define BSC_DIV			0x14
++#define BSC_DEL			0x18
++#define BSC_CLKT		0x1c
++
++/* Bitfields in BSC_C */
++#define BSC_C_I2CEN		0x00008000
++#define BSC_C_INTR		0x00000400
++#define BSC_C_INTT		0x00000200
++#define BSC_C_INTD		0x00000100
++#define BSC_C_ST		0x00000080
++#define BSC_C_CLEAR_1		0x00000020
++#define BSC_C_CLEAR_2		0x00000010
++#define BSC_C_READ		0x00000001
++
++/* Bitfields in BSC_S */
++#define BSC_S_CLKT		0x00000200
++#define BSC_S_ERR		0x00000100
++#define BSC_S_RXF		0x00000080
++#define BSC_S_TXE		0x00000040
++#define BSC_S_RXD		0x00000020
++#define BSC_S_TXD		0x00000010
++#define BSC_S_RXR		0x00000008
++#define BSC_S_TXW		0x00000004
++#define BSC_S_DONE		0x00000002
++#define BSC_S_TA		0x00000001
++
++#define I2C_TIMEOUT_MS	150
++
++#define DRV_NAME	"bcm2708_i2c"
++
++static unsigned int baudrate = CONFIG_I2C_BCM2708_BAUDRATE;
++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
++MODULE_PARM_DESC(baudrate, "The I2C baudrate");
++
++
++struct bcm2708_i2c {
++	struct i2c_adapter adapter;
++
++	spinlock_t lock;
++	void __iomem *base;
++	int irq;
++	struct clk *clk;
++
++	struct completion done;
++
++	struct i2c_msg *msg;
++	int pos;
++	int nmsgs;
++	bool error;
++};
++
++/*
++ * This function sets the ALT mode on the I2C pins so that we can use them with
++ * the BSC hardware.
++ *
++ * FIXME: This is a hack. Use pinmux / pinctrl.
++ */
++static void bcm2708_i2c_init_pinmode(int id)
++{
++#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
++#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
++
++	int pin;
++	u32 *gpio = ioremap(0x20200000, SZ_16K);
++
++        BUG_ON(id != 0 && id != 1);
++	/* BSC0 is on GPIO 0 & 1, BSC1 is on GPIO 2 & 3 */
++	for (pin = id*2+0; pin <= id*2+1; pin++) {
++printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
++		INP_GPIO(pin);		/* set mode to GPIO input first */
++		SET_GPIO_ALT(pin, 0);	/* set mode to ALT 0 */
++	}
++
++	iounmap(gpio);
++
++#undef INP_GPIO
++#undef SET_GPIO_ALT
++}
++
++static inline u32 bcm2708_rd(struct bcm2708_i2c *bi, unsigned reg)
++{
++	return readl(bi->base + reg);
++}
++
++static inline void bcm2708_wr(struct bcm2708_i2c *bi, unsigned reg, u32 val)
++{
++	writel(val, bi->base + reg);
++}
++
++static inline void bcm2708_bsc_reset(struct bcm2708_i2c *bi)
++{
++	bcm2708_wr(bi, BSC_C, 0);
++	bcm2708_wr(bi, BSC_S, BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE);	
++}
++
++static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi)
++{
++	while ((bcm2708_rd(bi, BSC_S) & BSC_S_RXD) && (bi->pos < bi->msg->len))
++		bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO);
++}
++
++static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi)
++{
++	while ((bcm2708_rd(bi, BSC_S) & BSC_S_TXD) && (bi->pos < bi->msg->len))
++		bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
++}
++
++static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
++{
++	unsigned long bus_hz;
++	u32 cdiv;
++	u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1;
++
++	bus_hz = clk_get_rate(bi->clk);
++	cdiv = bus_hz / baudrate;
++
++	if (bi->msg->flags & I2C_M_RD)
++		c |= BSC_C_INTR | BSC_C_READ;
++	else
++		c |= BSC_C_INTT;
++
++	bcm2708_wr(bi, BSC_DIV, cdiv);
++	bcm2708_wr(bi, BSC_A, bi->msg->addr);
++	bcm2708_wr(bi, BSC_DLEN, bi->msg->len);
++	bcm2708_wr(bi, BSC_C, c);
++}
++
++static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
++{
++	struct bcm2708_i2c *bi = dev_id;
++	bool handled = true;
++	u32 s;
++
++	spin_lock(&bi->lock);
++
++	/* we may see camera interrupts on the "other" I2C channel
++           Just return if we've not sent anything */
++        if (!bi->nmsgs || !bi->msg )
++		goto early_exit;
++
++	s = bcm2708_rd(bi, BSC_S);
++
++	if (s & (BSC_S_CLKT | BSC_S_ERR)) {
++		bcm2708_bsc_reset(bi);
++		bi->error = true;
++
++		/* wake up our bh */
++		complete(&bi->done);
++	} else if (s & BSC_S_DONE) {
++		bi->nmsgs--;
++
++		if (bi->msg->flags & I2C_M_RD)
++			bcm2708_bsc_fifo_drain(bi);
++
++		bcm2708_bsc_reset(bi);
++
++		if (bi->nmsgs) {
++			/* advance to next message */
++			bi->msg++;
++			bi->pos = 0;
++			bcm2708_bsc_setup(bi);
++		} else {
++			/* wake up our bh */
++			complete(&bi->done);
++		}
++	} else if (s & BSC_S_TXW) {
++		bcm2708_bsc_fifo_fill(bi);
++	} else if (s & BSC_S_RXR) {
++		bcm2708_bsc_fifo_drain(bi);
++	} else {
++		handled = false;
++	}
++
++early_exit:
++	spin_unlock(&bi->lock);
++
++	return handled ? IRQ_HANDLED : IRQ_NONE;
++}
++
++static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap,
++	struct i2c_msg *msgs, int num)
++{
++	struct bcm2708_i2c *bi = adap->algo_data;
++	unsigned long flags;
++	int ret;
++
++	spin_lock_irqsave(&bi->lock, flags);
++
++	INIT_COMPLETION(bi->done);
++	bi->msg = msgs;
++	bi->pos = 0;
++	bi->nmsgs = num;
++	bi->error = false;
++
++	spin_unlock_irqrestore(&bi->lock, flags);
++
++	bcm2708_bsc_setup(bi);
++
++	ret = wait_for_completion_timeout(&bi->done,
++			msecs_to_jiffies(I2C_TIMEOUT_MS));
++	if (ret == 0) {
++		dev_err(&adap->dev, "transfer timed out\n");
++		spin_lock_irqsave(&bi->lock, flags);
++		bcm2708_bsc_reset(bi);
++		spin_unlock_irqrestore(&bi->lock, flags);
++		return -ETIMEDOUT;
++	}
++
++	return bi->error ? -EIO : num;
++}
++
++static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap)
++{
++	return I2C_FUNC_I2C | /*I2C_FUNC_10BIT_ADDR |*/ I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm bcm2708_i2c_algorithm = {
++	.master_xfer = bcm2708_i2c_master_xfer,
++	.functionality = bcm2708_i2c_functionality,
++};
++
++static int bcm2708_i2c_probe(struct platform_device *pdev)
++{
++	struct resource *regs;
++	int irq, err = -ENOMEM;
++	struct clk *clk;
++	struct bcm2708_i2c *bi;
++	struct i2c_adapter *adap;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_err(&pdev->dev, "could not get IO memory\n");
++		return -ENXIO;
++	}
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		dev_err(&pdev->dev, "could not get IRQ\n");
++		return irq;
++	}
++
++	clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk));
++		return PTR_ERR(clk);
++	}
++
++	bcm2708_i2c_init_pinmode(pdev->id);
++
++	bi = kzalloc(sizeof(*bi), GFP_KERNEL);
++	if (!bi)
++		goto out_clk_put;
++
++	platform_set_drvdata(pdev, bi);
++
++	adap = &bi->adapter;
++	adap->class = I2C_CLASS_HWMON | I2C_CLASS_DDC;
++	adap->algo = &bcm2708_i2c_algorithm;
++	adap->algo_data = bi;
++	adap->dev.parent = &pdev->dev;
++	adap->nr = pdev->id;
++	strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
++
++	switch (pdev->id) {
++	case 0:
++		adap->class = I2C_CLASS_HWMON;
++		break;
++	case 1:
++		adap->class = I2C_CLASS_DDC;
++		break;
++	default:
++		dev_err(&pdev->dev, "can only bind to BSC 0 or 1\n");
++		err = -ENXIO;
++		goto out_free_bi;
++	}
++
++	spin_lock_init(&bi->lock);
++	init_completion(&bi->done);
++
++	bi->base = ioremap(regs->start, resource_size(regs));
++	if (!bi->base) {
++		dev_err(&pdev->dev, "could not remap memory\n");
++		goto out_free_bi;
++	}
++
++	bi->irq = irq;
++	bi->clk = clk;
++
++	err = request_irq(irq, bcm2708_i2c_interrupt, IRQF_SHARED,
++			dev_name(&pdev->dev), bi);
++	if (err) {
++		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
++		goto out_iounmap;
++	}
++
++	bcm2708_bsc_reset(bi);
++
++	err = i2c_add_numbered_adapter(adap);
++	if (err < 0) {
++		dev_err(&pdev->dev, "could not add I2C adapter: %d\n", err);
++		goto out_free_irq;
++	}
++
++	dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %dk)\n",
++		pdev->id, (unsigned long)regs->start, irq, baudrate/1000);
++
++	return 0;
++
++out_free_irq:
++	free_irq(bi->irq, bi);
++out_iounmap:
++	iounmap(bi->base);
++out_free_bi:
++	kfree(bi);
++out_clk_put:
++	clk_put(clk);
++	return err;
++}
++
++static int bcm2708_i2c_remove(struct platform_device *pdev)
++{
++	struct bcm2708_i2c *bi = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++
++	i2c_del_adapter(&bi->adapter);
++	free_irq(bi->irq, bi);
++	iounmap(bi->base);
++	clk_disable(bi->clk);
++	clk_put(bi->clk);
++	kfree(bi);
++
++	return 0;
++}
++
++static struct platform_driver bcm2708_i2c_driver = {
++	.driver		= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= bcm2708_i2c_probe,
++	.remove		= bcm2708_i2c_remove,
++};
++
++// module_platform_driver(bcm2708_i2c_driver);
++
++
++static int __init bcm2708_i2c_init(void)
++{
++	return platform_driver_register(&bcm2708_i2c_driver);
++}
++
++static void __exit bcm2708_i2c_exit(void)
++{
++	platform_driver_unregister(&bcm2708_i2c_driver);
++}
++
++module_init(bcm2708_i2c_init);
++module_exit(bcm2708_i2c_exit);
++
++
++
++MODULE_DESCRIPTION("BSC controller driver for Broadcom BCM2708");
++MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" DRV_NAME);
+diff -urN linux-3.10/drivers/i2c/busses/Kconfig linux-rpi-3.10.y/drivers/i2c/busses/Kconfig
+--- linux-3.10/drivers/i2c/busses/Kconfig	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/i2c/busses/Kconfig	2013-07-06 15:25:50.000000000 +0100
+@@ -343,6 +343,25 @@
+ 	  This support is also available as a module.  If so, the module
+ 	  will be called i2c-bcm2835.
+ 
++config I2C_BCM2708
++	tristate "BCM2708 BSC"
++	depends on MACH_BCM2708
++	help
++	  Enabling this option will add BSC (Broadcom Serial Controller)
++	  support for the BCM2708. BSC is a Broadcom proprietary bus compatible
++	  with I2C/TWI/SMBus.
++
++config I2C_BCM2708_BAUDRATE
++    prompt "BCM2708 I2C baudrate"
++	depends on I2C_BCM2708
++    int
++    default 100000
++    help
++      Set the I2C baudrate. This will alter the default value. A
++      different baudrate can be set by using a module parameter as well. If
++      no parameter is provided when loading, this is the value that will be
++      used.
++
+ config I2C_BLACKFIN_TWI
+ 	tristate "Blackfin TWI I2C support"
+ 	depends on BLACKFIN
+diff -urN linux-3.10/drivers/i2c/busses/Makefile linux-rpi-3.10.y/drivers/i2c/busses/Makefile
+--- linux-3.10/drivers/i2c/busses/Makefile	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/i2c/busses/Makefile	2013-07-06 15:25:50.000000000 +0100
+@@ -32,6 +32,7 @@
+ obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
+ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
+ obj-$(CONFIG_I2C_BCM2835)	+= i2c-bcm2835.o
++obj-$(CONFIG_I2C_BCM2708)	+= i2c-bcm2708.o
+ obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
+ obj-$(CONFIG_I2C_CBUS_GPIO)	+= i2c-cbus-gpio.o
+ obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
diff --git a/target/linux/brcm2708/patches-3.10/016-amba-pl011-fifosize.patch b/target/linux/brcm2708/patches-3.10/016-amba-pl011-fifosize.patch
new file mode 100644
index 0000000000..c994f912aa
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.10/016-amba-pl011-fifosize.patch
@@ -0,0 +1,12 @@
+diff -urN linux-3.10/drivers/tty/serial/amba-pl011.c linux-rpi-3.10.y/drivers/tty/serial/amba-pl011.c
+--- linux-3.10/drivers/tty/serial/amba-pl011.c	2013-06-30 23:13:29.000000000 +0100
++++ linux-rpi-3.10.y/drivers/tty/serial/amba-pl011.c	2013-07-06 15:25:50.000000000 +0100
+@@ -84,7 +84,7 @@
+ 
+ static unsigned int get_fifosize_arm(unsigned int periphid)
+ {
+-	unsigned int rev = (periphid >> 20) & 0xf;
++	unsigned int rev = 0; //(periphid >> 20) & 0xf;
+ 	return rev < 3 ? 16 : 32;
+ }
+