brcm2708: backport upstream ARM dts commits

This gets us in sync with dts from kernel 4.11. Two patches were already
backported earlier.
I decided to use 03x prefix as it's kind of similar to the 3xx prefix:
3xx - architecture specific patches
It isn't any documented or strict rule though. We don't need to stick to
it if we hit any problems.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 235 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.9/031-v4.10-0001-ARM-dts-bcm283x-Define-standard-pinctrl-groups-in-th.patch b/target/linux/brcm2708/patches-4.9/031-v4.10-0001-ARM-dts-bcm283x-Define-standard-pinctrl-groups-in-th.patch
new file mode 100644
index 0000000000..6173d943d2
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.9/031-v4.10-0001-ARM-dts-bcm283x-Define-standard-pinctrl-groups-in-th.patch
@@ -0,0 +1,235 @@
+From 21ff843931b2e5a9b628ac56fd0f2e4355890096 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Mon, 19 Sep 2016 10:43:18 +0200
+Subject: [PATCH] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio
+ node.
+
+The BCM2835-ARM-Peripherals.pdf documentation specifies what the
+function selects do for the pins, and there are a bunch of obvious
+groupings to be made.  With these created, we'll be able to replace
+bcm2835-rpi.dtsi's main "set all of these pins to alt0" with
+references to specific groups we want enabled.
+
+Also add pinctrl groups for emmc and sdhost.
+
+Based on patches by Eric Anholt, with fixups by Gerd Hoffmann.
+
+Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
+Signed-off-by: Eric Anholt <eric@anholt.net>
+Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
+---
+ arch/arm/boot/dts/bcm283x.dtsi | 203 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 203 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm283x.dtsi
++++ b/arch/arm/boot/dts/bcm283x.dtsi
+@@ -132,6 +132,209 @@
+ 
+ 			interrupt-controller;
+ 			#interrupt-cells = <2>;
++
++			/* Defines pin muxing groups according to
++			 * BCM2835-ARM-Peripherals.pdf page 102.
++			 *
++			 * While each pin can have its mux selected
++			 * for various functions individually, some
++			 * groups only make sense to switch to a
++			 * particular function together.
++			 */
++			dpi_gpio0: dpi_gpio0 {
++				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
++					     12 13 14 15 16 17 18 19
++					     20 21 22 23 24 25 26 27>;
++				brcm,function = <BCM2835_FSEL_ALT2>;
++			};
++			emmc_gpio22: emmc_gpio22 {
++				brcm,pins = <22 23 24 25 26 27>;
++				brcm,function = <BCM2835_FSEL_ALT3>;
++			};
++			emmc_gpio34: emmc_gpio34 {
++				brcm,pins = <34 35 36 37 38 39>;
++				brcm,function = <BCM2835_FSEL_ALT3>;
++				brcm,pull = <BCM2835_PUD_OFF
++					     BCM2835_PUD_UP
++					     BCM2835_PUD_UP
++					     BCM2835_PUD_UP
++					     BCM2835_PUD_UP
++					     BCM2835_PUD_UP>;
++			};
++			emmc_gpio48: emmc_gpio48 {
++				brcm,pins = <48 49 50 51 52 53>;
++				brcm,function = <BCM2835_FSEL_ALT3>;
++			};
++
++			gpclk0_gpio4: gpclk0_gpio4 {
++				brcm,pins = <4>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			gpclk1_gpio5: gpclk1_gpio5 {
++				brcm,pins = <5>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			gpclk1_gpio42: gpclk1_gpio42 {
++				brcm,pins = <42>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			gpclk1_gpio44: gpclk1_gpio44 {
++				brcm,pins = <44>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			gpclk2_gpio6: gpclk2_gpio6 {
++				brcm,pins = <6>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			gpclk2_gpio43: gpclk2_gpio43 {
++				brcm,pins = <43>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++
++			i2c0_gpio0: i2c0_gpio0 {
++				brcm,pins = <0 1>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			i2c0_gpio32: i2c0_gpio32 {
++				brcm,pins = <32 34>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			i2c0_gpio44: i2c0_gpio44 {
++				brcm,pins = <44 45>;
++				brcm,function = <BCM2835_FSEL_ALT1>;
++			};
++			i2c1_gpio2: i2c1_gpio2 {
++				brcm,pins = <2 3>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			i2c1_gpio44: i2c1_gpio44 {
++				brcm,pins = <44 45>;
++				brcm,function = <BCM2835_FSEL_ALT2>;
++			};
++			i2c_slave_gpio18: i2c_slave_gpio18 {
++				brcm,pins = <18 19 20 21>;
++				brcm,function = <BCM2835_FSEL_ALT3>;
++			};
++
++			jtag_gpio4: jtag_gpio4 {
++				brcm,pins = <4 5 6 12 13>;
++				brcm,function = <BCM2835_FSEL_ALT4>;
++			};
++			jtag_gpio22: jtag_gpio22 {
++				brcm,pins = <22 23 24 25 26 27>;
++				brcm,function = <BCM2835_FSEL_ALT4>;
++			};
++
++			pcm_gpio18: pcm_gpio18 {
++				brcm,pins = <18 19 20 21>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			pcm_gpio28: pcm_gpio28 {
++				brcm,pins = <28 29 30 31>;
++				brcm,function = <BCM2835_FSEL_ALT2>;
++			};
++
++			pwm0_gpio12: pwm0_gpio12 {
++				brcm,pins = <12>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			pwm0_gpio18: pwm0_gpio18 {
++				brcm,pins = <18>;
++				brcm,function = <BCM2835_FSEL_ALT5>;
++			};
++			pwm0_gpio40: pwm0_gpio40 {
++				brcm,pins = <40>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			pwm1_gpio13: pwm1_gpio13 {
++				brcm,pins = <13>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			pwm1_gpio19: pwm1_gpio19 {
++				brcm,pins = <19>;
++				brcm,function = <BCM2835_FSEL_ALT5>;
++			};
++			pwm1_gpio41: pwm1_gpio41 {
++				brcm,pins = <41>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			pwm1_gpio45: pwm1_gpio45 {
++				brcm,pins = <45>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++
++			sdhost_gpio48: sdhost_gpio48 {
++				brcm,pins = <48 49 50 51 52 53>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++
++			spi0_gpio7: spi0_gpio7 {
++				brcm,pins = <7 8 9 10 11>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			spi0_gpio35: spi0_gpio35 {
++				brcm,pins = <35 36 37 38 39>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			spi1_gpio16: spi1_gpio16 {
++				brcm,pins = <16 17 18 19 20 21>;
++				brcm,function = <BCM2835_FSEL_ALT4>;
++			};
++			spi2_gpio40: spi2_gpio40 {
++				brcm,pins = <40 41 42 43 44 45>;
++				brcm,function = <BCM2835_FSEL_ALT4>;
++			};
++
++			uart0_gpio14: uart0_gpio14 {
++				brcm,pins = <14 15>;
++				brcm,function = <BCM2835_FSEL_ALT0>;
++			};
++			/* Separate from the uart0_gpio14 group
++			 * because it conflicts with spi1_gpio16, and
++			 * people often run uart0 on the two pins
++			 * without flow contrl.
++			 */
++			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
++				brcm,pins = <16 17>;
++				brcm,function = <BCM2835_FSEL_ALT3>;
++			};
++			uart0_gpio30: uart0_gpio30 {
++				brcm,pins = <30 31>;
++				brcm,function = <BCM2835_FSEL_ALT3>;
++			};
++			uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 {
++				brcm,pins = <32 33>;
++				brcm,function = <BCM2835_FSEL_ALT3>;
++			};
++
++			uart1_gpio14: uart1_gpio14 {
++				brcm,pins = <14 15>;
++				brcm,function = <BCM2835_FSEL_ALT5>;
++			};
++			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
++				brcm,pins = <16 17>;
++				brcm,function = <BCM2835_FSEL_ALT5>;
++			};
++			uart1_gpio32: uart1_gpio32 {
++				brcm,pins = <32 33>;
++				brcm,function = <BCM2835_FSEL_ALT5>;
++			};
++			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
++				brcm,pins = <30 31>;
++				brcm,function = <BCM2835_FSEL_ALT5>;
++			};
++			uart1_gpio36: uart1_gpio36 {
++				brcm,pins = <36 37 38 39>;
++				brcm,function = <BCM2835_FSEL_ALT2>;
++			};
++			uart1_gpio40: uart1_gpio40 {
++				brcm,pins = <40 41>;
++				brcm,function = <BCM2835_FSEL_ALT5>;
++			};
++			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
++				brcm,pins = <42 43>;
++				brcm,function = <BCM2835_FSEL_ALT5>;
++			};
+ 		};
+ 
+ 		uart0: serial@7e201000 {