brcm2708: update linux 4.4 patches to latest version

As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Also adds support for Raspberry Pi Compute Module 3 (untested).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 54 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.4/0346-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.4/0346-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
new file mode 100644
index 0000000000..60e4dd9e9f
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.4/0346-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
@@ -0,0 +1,54 @@
+From 832d2f1df231073ac72474743e3d3adbf0540030 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Mon, 9 May 2016 17:28:18 -0700
+Subject: [PATCH] clk: bcm2835: Mark GPIO clocks enabled at boot as critical.
+
+These divide off of PLLD_PER and are used for the ethernet and wifi
+PHYs source PLLs.  Neither of them is currently represented by a phy
+device that would grab the clock for us.
+
+This keeps other drivers from killing the networking PHYs when they
+disable their own clocks and trigger PLLD_PER's refcount going to 0.
+
+v2: Skip marking as critical if they aren't on at boot.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -1246,6 +1246,15 @@ static struct clk *bcm2835_register_cloc
+ 	init.name = data->name;
+ 	init.flags = data->flags | CLK_IGNORE_UNUSED;
+ 
++	/*
++	 * Some GPIO clocks for ethernet/wifi PLLs are marked as
++	 * critical (since some platforms use them), but if the
++	 * firmware didn't have them turned on then they clearly
++	 * aren't actually critical.
++	 */
++	if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0)
++		init.flags &= ~CLK_IS_CRITICAL;
++
+ 	if (data->is_vpu_clock) {
+ 		init.ops = &bcm2835_vpu_clock_clk_ops;
+ 	} else {
+@@ -1720,13 +1729,15 @@ static const struct bcm2835_clk_desc clk
+ 		.div_reg = CM_GP1DIV,
+ 		.int_bits = 12,
+ 		.frac_bits = 12,
++		.flags = CLK_IS_CRITICAL,
+ 		.is_mash_clock = true),
+ 	[BCM2835_CLOCK_GP2]	= REGISTER_PER_CLK(
+ 		.name = "gp2",
+ 		.ctl_reg = CM_GP2CTL,
+ 		.div_reg = CM_GP2DIV,
+ 		.int_bits = 12,
+-		.frac_bits = 12),
++		.frac_bits = 12,
++		.flags = CLK_IS_CRITICAL),
+ 
+ 	/* HDMI state machine */
+ 	[BCM2835_CLOCK_HSM]	= REGISTER_PER_CLK(