brcm2708: update linux 4.4 patches to latest version

As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 160 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.4/0167-bcm2835-sdhost-Only-claim-one-DMA-channel.patch b/target/linux/brcm2708/patches-4.4/0167-bcm2835-sdhost-Only-claim-one-DMA-channel.patch
new file mode 100644
index 0000000000..5f2775d31c
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.4/0167-bcm2835-sdhost-Only-claim-one-DMA-channel.patch
@@ -0,0 +1,160 @@
+From d6b47c6dc22a1fbe2fcb5c742936a32baad60409 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Mon, 7 Mar 2016 16:46:39 +0000
+Subject: [PATCH 167/304] bcm2835-sdhost: Only claim one DMA channel
+
+With both MMC controllers enabled there are few DMA channels left. The
+bcm2835-sdhost driver only uses DMA in one direction at a time, so it
+doesn't need to claim two channels.
+
+See: https://github.com/raspberrypi/linux/issues/1327
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/bcm2708_common.dtsi |  5 +--
+ drivers/mmc/host/bcm2835-sdhost.c     | 70 ++++++++++++++++++++++++-----------
+ 2 files changed, 50 insertions(+), 25 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm2708_common.dtsi
++++ b/arch/arm/boot/dts/bcm2708_common.dtsi
+@@ -136,9 +136,8 @@
+ 			reg = <0x7e202000 0x100>;
+ 			interrupts = <2 24>;
+ 			clocks = <&clk_core>;
+-			dmas = <&dma 13>,
+-			       <&dma 13>;
+-			dma-names = "tx", "rx";
++			dmas = <&dma 13>;
++			dma-names = "rx-tx";
+ 			brcm,overclock-50 = <0>;
+ 			brcm,pio-limit = <1>;
+ 			status = "disabled";
+--- a/drivers/mmc/host/bcm2835-sdhost.c
++++ b/drivers/mmc/host/bcm2835-sdhost.c
+@@ -185,9 +185,10 @@ struct bcm2835_host {
+ 	unsigned int			debug:1;		/* Enable debug output */
+ 
+ 	/*DMA part*/
+-	struct dma_chan			*dma_chan_rx;		/* DMA channel for reads */
+-	struct dma_chan			*dma_chan_tx;		/* DMA channel for writes */
+-	struct dma_chan			*dma_chan;		/* Channel in used */
++	struct dma_chan			*dma_chan_rxtx;		/* DMA channel for reads and writes */
++	struct dma_chan			*dma_chan;		/* Channel in use */
++	struct dma_slave_config		dma_cfg_rx;
++	struct dma_slave_config		dma_cfg_tx;
+ 	struct dma_async_tx_descriptor	*dma_desc;
+ 	u32				dma_dir;
+ 	u32				drain_words;
+@@ -771,12 +772,11 @@ static void bcm2835_sdhost_prepare_dma(s
+ 	log_event("PRD<", (u32)data, 0);
+ 	pr_debug("bcm2835_sdhost_prepare_dma()\n");
+ 
++	dma_chan = host->dma_chan_rxtx;
+ 	if (data->flags & MMC_DATA_READ) {
+-		dma_chan = host->dma_chan_rx;
+ 		dir_data = DMA_FROM_DEVICE;
+ 		dir_slave = DMA_DEV_TO_MEM;
+ 	} else {
+-		dma_chan = host->dma_chan_tx;
+ 		dir_data = DMA_TO_DEVICE;
+ 		dir_slave = DMA_MEM_TO_DEV;
+ 	}
+@@ -813,6 +813,12 @@ static void bcm2835_sdhost_prepare_dma(s
+ 		host->drain_words = len/4;
+ 	}
+ 
++	/* The parameters have already been validated, so this will not fail */
++	(void)dmaengine_slave_config(dma_chan,
++				     (dir_data == DMA_FROM_DEVICE) ?
++				     &host->dma_cfg_rx :
++				     &host->dma_cfg_tx);
++
+ 	len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len,
+ 			 dir_data);
+ 
+@@ -1805,28 +1811,46 @@ int bcm2835_sdhost_add_host(struct bcm28
+ 	spin_lock_init(&host->lock);
+ 
+ 	if (host->allow_dma) {
+-		if (IS_ERR_OR_NULL(host->dma_chan_tx) ||
+-		    IS_ERR_OR_NULL(host->dma_chan_rx)) {
+-			pr_err("%s: unable to initialise DMA channels. "
++		if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) {
++			pr_err("%s: unable to initialise DMA channel. "
+ 			       "Falling back to PIO\n",
+ 			       mmc_hostname(mmc));
+ 			host->use_dma = false;
+ 		} else {
+-			host->use_dma = true;
+-
+ 			cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ 			cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ 			cfg.slave_id = 13;		/* DREQ channel */
+ 
++			/* Validate the slave configurations */
++
+ 			cfg.direction = DMA_MEM_TO_DEV;
+ 			cfg.src_addr = 0;
+ 			cfg.dst_addr = host->bus_addr + SDDATA;
+-			ret = dmaengine_slave_config(host->dma_chan_tx, &cfg);
+ 
+-			cfg.direction = DMA_DEV_TO_MEM;
+-			cfg.src_addr = host->bus_addr + SDDATA;
+-			cfg.dst_addr = 0;
+-			ret = dmaengine_slave_config(host->dma_chan_rx, &cfg);
++			ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg);
++
++			if (ret == 0) {
++				host->dma_cfg_tx = cfg;
++
++				cfg.direction = DMA_DEV_TO_MEM;
++				cfg.src_addr = host->bus_addr + SDDATA;
++				cfg.dst_addr = 0;
++
++				ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg);
++			}
++
++			if (ret == 0) {
++				host->dma_cfg_rx = cfg;
++
++				host->use_dma = true;
++			} else {
++				pr_err("%s: unable to configure DMA channel. "
++				       "Falling back to PIO\n",
++				       mmc_hostname(mmc));
++				dma_release_channel(host->dma_chan_rxtx);
++				host->dma_chan_rxtx = NULL;
++				host->use_dma = false;
++			}
+ 		}
+ 	} else {
+ 		host->use_dma = false;
+@@ -1948,19 +1972,21 @@ static int bcm2835_sdhost_probe(struct p
+ 
+ 	if (host->allow_dma) {
+ 		if (node) {
+-			host->dma_chan_tx =
+-				dma_request_slave_channel(dev, "tx");
+-			host->dma_chan_rx =
+-				dma_request_slave_channel(dev, "rx");
++			host->dma_chan_rxtx =
++				dma_request_slave_channel(dev, "rx-tx");
++			if (!host->dma_chan_rxtx)
++				host->dma_chan_rxtx =
++					dma_request_slave_channel(dev, "tx");
++			if (!host->dma_chan_rxtx)
++				host->dma_chan_rxtx =
++					dma_request_slave_channel(dev, "rx");
+ 		} else {
+ 			dma_cap_mask_t mask;
+ 
+ 			dma_cap_zero(mask);
+ 			/* we don't care about the channel, any would work */
+ 			dma_cap_set(DMA_SLAVE, mask);
+-			host->dma_chan_tx =
+-				dma_request_channel(mask, NULL, NULL);
+-			host->dma_chan_rx =
++			host->dma_chan_rxtx =
+ 				dma_request_channel(mask, NULL, NULL);
+ 		}
+ 	}