kernel: update 4.1 to 4.1.10

Fixes a regression on spi flash devices (upstream commit 1583eaece6fa).

Changelogs:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.7
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.8
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.9
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.10

096-ipv4-off-by-one-in-continuation-handling-in-proc-net.patch was applied
upstream and dropped.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
[update from 4.1.9 to 4.1.10]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47104

6 files changed, 15 insertions, 14 deletions

diff --git a/target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch b/target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch
index 80ad8c3461..79891f8504 100644
--- a/target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch
+++ b/target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch
@@ -168,7 +168,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
  config ARCH_MULTIPLATFORM
  	bool "Allow multiple platforms to be selected"
  	depends on MMU
-@@ -823,6 +859,9 @@ config ARCH_VIRT
+@@ -824,6 +860,9 @@ config ARCH_VIRT
  # Kconfigs may be included either alphabetically (according to the
  # plat- suffix) or along side the corresponding mach-* source.
  #
@@ -6745,7 +6745,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
  ENTRY(cpu_v6_dcache_clean_area)
 --- a/arch/arm/mm/proc-v7.S
 +++ b/arch/arm/mm/proc-v7.S
-@@ -456,6 +456,7 @@ __v7_setup:
+@@ -460,6 +460,7 @@ __v7_setup_cont:
  	orr	r0, r0, r6			@ set them
   THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
  	ret	lr				@ return to head.S:__ret
diff --git a/target/linux/brcm2708/patches-4.1/0033-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch b/target/linux/brcm2708/patches-4.1/0033-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch
index 2a2f9b3980..71d7491f5b 100644
--- a/target/linux/brcm2708/patches-4.1/0033-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch
+++ b/target/linux/brcm2708/patches-4.1/0033-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch
@@ -11,7 +11,7 @@ Subject: [PATCH 033/171] config: Enable CONFIG_MEMCG, but leave it disabled
 
 --- a/kernel/cgroup.c
 +++ b/kernel/cgroup.c
-@@ -5393,6 +5393,29 @@ static int __init cgroup_disable(char *s
+@@ -5394,6 +5394,29 @@ static int __init cgroup_disable(char *s
  }
  __setup("cgroup_disable=", cgroup_disable);
  
diff --git a/target/linux/brcm2708/patches-4.1/0099-spi-bcm2835-Support-pin-groups-other-than-7-11.patch b/target/linux/brcm2708/patches-4.1/0099-spi-bcm2835-Support-pin-groups-other-than-7-11.patch
index f414d10abd..05da85c442 100644
--- a/target/linux/brcm2708/patches-4.1/0099-spi-bcm2835-Support-pin-groups-other-than-7-11.patch
+++ b/target/linux/brcm2708/patches-4.1/0099-spi-bcm2835-Support-pin-groups-other-than-7-11.patch
@@ -19,7 +19,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/spi/spi-bcm2835.c
 +++ b/drivers/spi/spi-bcm2835.c
-@@ -359,6 +359,8 @@ static int bcm2835_spi_setup(struct spi_
+@@ -376,6 +376,8 @@ static int bcm2835_spi_setup(struct spi_
  {
  	int err;
  	struct gpio_chip *chip;
@@ -28,7 +28,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	/*
  	 * sanity checking the native-chipselects
  	 */
-@@ -375,15 +377,42 @@ static int bcm2835_spi_setup(struct spi_
+@@ -392,15 +394,42 @@ static int bcm2835_spi_setup(struct spi_
  			"setup: only two native chip-selects are supported\n");
  		return -EINVAL;
  	}
diff --git a/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch b/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch
index 3521f08258..15205d1732 100644
--- a/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch
+++ b/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch
@@ -375,7 +375,7 @@ Signed-off-by: Mark Brown <broonie@kernel.org>
  static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
  					 struct spi_device *spi,
  					 struct spi_transfer *tfr,
-@@ -301,12 +582,26 @@ static int bcm2835_spi_transfer_one(stru
+@@ -299,6 +580,11 @@ static int bcm2835_spi_transfer_one(stru
  		return bcm2835_spi_transfer_one_poll(master, spi, tfr,
  						     cs, xfer_time_us);
  
@@ -387,6 +387,7 @@ Signed-off-by: Mark Brown <broonie@kernel.org>
  	return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
  }
  
+@@ -324,6 +610,15 @@ static int bcm2835_spi_prepare_message(s
  static void bcm2835_spi_handle_err(struct spi_master *master,
  				   struct spi_message *msg)
  {
@@ -402,7 +403,7 @@ Signed-off-by: Mark Brown <broonie@kernel.org>
  	bcm2835_spi_reset_hw(master);
  }
  
-@@ -505,6 +800,8 @@ static int bcm2835_spi_probe(struct plat
+@@ -523,6 +818,8 @@ static int bcm2835_spi_probe(struct plat
  		goto out_clk_disable;
  	}
  
@@ -411,7 +412,7 @@ Signed-off-by: Mark Brown <broonie@kernel.org>
  	/* initialise the hardware with the default polarities */
  	bcm2835_wr(bs, BCM2835_SPI_CS,
  		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
-@@ -535,6 +832,8 @@ static int bcm2835_spi_remove(struct pla
+@@ -553,6 +850,8 @@ static int bcm2835_spi_remove(struct pla
  
  	clk_disable_unprepare(bs->clk);
  
diff --git a/target/linux/brcm2708/patches-4.1/0159-spi-bcm2835-fixed-compile-issues-due-to-embedded-com.patch b/target/linux/brcm2708/patches-4.1/0159-spi-bcm2835-fixed-compile-issues-due-to-embedded-com.patch
index 6f5cee2aa5..394112284c 100644
--- a/target/linux/brcm2708/patches-4.1/0159-spi-bcm2835-fixed-compile-issues-due-to-embedded-com.patch
+++ b/target/linux/brcm2708/patches-4.1/0159-spi-bcm2835-fixed-compile-issues-due-to-embedded-com.patch
@@ -11,15 +11,15 @@ Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
 
 --- a/drivers/spi/spi-bcm2835.c
 +++ b/drivers/spi/spi-bcm2835.c
-@@ -592,6 +592,7 @@ static int bcm2835_spi_transfer_one(stru
- 	return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
+@@ -609,6 +609,7 @@ static int bcm2835_spi_prepare_message(s
+ 	return 0;
  }
  
 +#if 0
  static void bcm2835_spi_handle_err(struct spi_master *master,
  				   struct spi_message *msg)
  {
-@@ -606,6 +607,7 @@ static void bcm2835_spi_handle_err(struc
+@@ -623,6 +624,7 @@ static void bcm2835_spi_handle_err(struc
  	/* and reset */
  	bcm2835_spi_reset_hw(master);
  }
diff --git a/target/linux/brcm2708/patches-4.1/0163-spi-bcm2835-Fix-buld-error-from-previous-commit.patch b/target/linux/brcm2708/patches-4.1/0163-spi-bcm2835-Fix-buld-error-from-previous-commit.patch
index 101f28e404..21061de5ca 100644
--- a/target/linux/brcm2708/patches-4.1/0163-spi-bcm2835-Fix-buld-error-from-previous-commit.patch
+++ b/target/linux/brcm2708/patches-4.1/0163-spi-bcm2835-Fix-buld-error-from-previous-commit.patch
@@ -9,15 +9,15 @@ Subject: [PATCH 163/171] spi: bcm2835: Fix buld error from previous commit
 
 --- a/drivers/spi/spi-bcm2835.c
 +++ b/drivers/spi/spi-bcm2835.c
-@@ -592,7 +592,6 @@ static int bcm2835_spi_transfer_one(stru
- 	return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
+@@ -609,7 +609,6 @@ static int bcm2835_spi_prepare_message(s
+ 	return 0;
  }
  
 -#if 0
  static void bcm2835_spi_handle_err(struct spi_master *master,
  				   struct spi_message *msg)
  {
-@@ -607,7 +606,6 @@ static void bcm2835_spi_handle_err(struc
+@@ -624,7 +623,6 @@ static void bcm2835_spi_handle_err(struc
  	/* and reset */
  	bcm2835_spi_reset_hw(master);
  }