brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 128 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0362-dwc-otg-FIQ-Fix-bad-mode-in-data-abort-handler.patch b/target/linux/brcm2708/patches-4.14/950-0362-dwc-otg-FIQ-Fix-bad-mode-in-data-abort-handler.patch
new file mode 100644
index 0000000000..1627494e27
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0362-dwc-otg-FIQ-Fix-bad-mode-in-data-abort-handler.patch
@@ -0,0 +1,128 @@
+From 8edeb93cec4b7ca6771348fafbf4676920b052c9 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Mon, 16 Jul 2018 14:40:13 +0100
+Subject: [PATCH 362/454] dwc-otg: FIQ: Fix "bad mode in data abort handler"
+
+Create a semi-static mapping for the USB registers early in the boot
+process, before additional kernel threads are started, so all threads
+will have the mappings from the start. This avoids the need for
+data aborts to lazily update them.
+
+See: https://github.com/raspberrypi/linux/issues/2450
+
+Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
+---
+ arch/arm/mach-bcm/board_bcm2835.c         | 69 +++++++++++++++++++++++
+ drivers/usb/host/dwc_otg/dwc_otg_driver.c |  2 +-
+ 2 files changed, 70 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/mach-bcm/board_bcm2835.c
++++ b/arch/arm/mach-bcm/board_bcm2835.c
+@@ -15,6 +15,7 @@
+ #include <linux/init.h>
+ #include <linux/irqchip.h>
+ #include <linux/of_address.h>
++#include <linux/of_fdt.h>
+ #include <linux/clk/bcm2835.h>
+ #include <asm/system_info.h>
+ 
+@@ -24,6 +25,9 @@
+ #include "platsmp.h"
+ #include <linux/dma-mapping.h>
+ 
++#define BCM2835_USB_VIRT_BASE   0xf0980000
++#define BCM2835_USB_VIRT_MPHI   0xf0006000
++
+ static void __init bcm2835_init(void)
+ {
+ 	struct device_node *np = of_find_node_by_path("/system");
+@@ -44,6 +48,70 @@ static void __init bcm2835_init_early(vo
+ 	init_dma_coherent_pool_size(SZ_1M);
+ }
+ 
++/*
++ * We need to map registers that are going to be accessed by the FIQ
++ * very early, before any kernel threads are spawned. Because if done
++ * later, the mapping tables are not updated instantly but lazily upon
++ * first access through a data abort handler. While that is fine
++ * when executing regular kernel code, if the first access in a specific
++ * thread happens while running FIQ code this will result in a panic.
++ *
++ * For more background see the following old mailing list thread:
++ * https://www.spinics.net/lists/arm-kernel/msg325250.html
++ */
++static int __init bcm2835_map_usb(unsigned long node, const char *uname,
++					int depth, void *data)
++{
++	struct map_desc map[2];
++	const __be32 *reg;
++	int len;
++	unsigned long p2b_offset = *((unsigned long *) data);
++
++	if (!of_flat_dt_is_compatible(node, "brcm,bcm2708-usb"))
++		return 0;
++	reg = of_get_flat_dt_prop(node, "reg", &len);
++	if (!reg || len != (sizeof(unsigned long) * 4))
++		return 0;
++
++	/* Use information about the physical addresses of the
++	 * registers from the device tree, but use legacy
++	 * iotable_init() static mapping function to map them,
++	 * as ioremap() is not functional at this stage in boot.
++	 */
++	map[0].virtual = (unsigned long) BCM2835_USB_VIRT_BASE;
++	map[0].pfn = __phys_to_pfn(be32_to_cpu(reg[0]) - p2b_offset);
++	map[0].length = be32_to_cpu(reg[1]);
++	map[0].type = MT_DEVICE;
++	map[1].virtual = (unsigned long) BCM2835_USB_VIRT_MPHI;
++	map[1].pfn = __phys_to_pfn(be32_to_cpu(reg[2]) - p2b_offset);
++	map[1].length = be32_to_cpu(reg[3]);
++	map[1].type = MT_DEVICE;
++	iotable_init(map, 2);
++
++	return 1;
++}
++
++static void __init bcm2835_map_io(void)
++{
++	const __be32 *ranges;
++	int soc, len;
++	unsigned long p2b_offset;
++
++	debug_ll_io_init();
++
++	/* Find out how to map bus to physical address first from soc/ranges */
++	soc = of_get_flat_dt_subnode_by_name(of_get_flat_dt_root(), "soc");
++	if (soc < 0)
++		return;
++	ranges = of_get_flat_dt_prop(soc, "ranges", &len);
++	if (!ranges || len < (sizeof(unsigned long) * 3))
++		return;
++	p2b_offset = be32_to_cpu(ranges[0]) - be32_to_cpu(ranges[1]);
++
++	/* Now search for bcm2708-usb node in device tree */
++	of_scan_flat_dt(bcm2835_map_usb, &p2b_offset);
++}
++
+ static const char * const bcm2835_compat[] = {
+ #ifdef CONFIG_ARCH_MULTI_V6
+ 	"brcm,bcm2835",
+@@ -56,6 +124,7 @@ static const char * const bcm2835_compat
+ };
+ 
+ DT_MACHINE_START(BCM2835, "BCM2835")
++	.map_io = bcm2835_map_io,
+ 	.init_machine = bcm2835_init,
+ 	.init_early = bcm2835_init_early,
+ 	.dt_compat = bcm2835_compat,
+--- a/drivers/usb/host/dwc_otg/dwc_otg_driver.c
++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c
+@@ -837,7 +837,7 @@ static int dwc_otg_driver_probe(
+ 		retval = -ENOMEM;
+ 		goto fail;
+ 	}
+-	dev_dbg(&_dev->dev, "base=0x%08x\n",
++	dev_info(&_dev->dev, "base=0x%08x\n",
+                 (unsigned)dwc_otg_device->os_dep.base);
+ #endif
+