brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 40 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0251-lan78xx-Read-initial-EEE-status-from-DT.patch b/target/linux/brcm2708/patches-4.14/950-0251-lan78xx-Read-initial-EEE-status-from-DT.patch
new file mode 100644
index 0000000000..534ab6d922
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0251-lan78xx-Read-initial-EEE-status-from-DT.patch
@@ -0,0 +1,40 @@
+From 519f76313689c7e2f03da2e7c91e3c75e68c9034 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Fri, 9 Mar 2018 12:01:00 +0000
+Subject: [PATCH 251/454] lan78xx: Read initial EEE status from DT
+
+Add two new DT properties:
+* microchip,eee-enabled  - a boolean to enable EEE
+* microchip,tx-lpi-timer - time in microseconds to wait before entering
+                           low power state
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ drivers/net/usb/lan78xx.c | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+--- a/drivers/net/usb/lan78xx.c
++++ b/drivers/net/usb/lan78xx.c
+@@ -2510,6 +2510,22 @@ static int lan78xx_open(struct net_devic
+ 
+ 	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
+ 
++	if (of_property_read_bool(dev->udev->dev.of_node,
++				  "microchip,eee-enabled")) {
++		struct ethtool_eee edata;
++		memset(&edata, 0, sizeof(edata));
++		edata.cmd = ETHTOOL_SEEE;
++		edata.advertised = ADVERTISED_1000baseT_Full |
++				   ADVERTISED_100baseT_Full;
++		edata.eee_enabled = true;
++		edata.tx_lpi_enabled = true;
++		if (of_property_read_u32(dev->udev->dev.of_node,
++					 "microchip,tx-lpi-timer",
++					 &edata.tx_lpi_timer))
++			edata.tx_lpi_timer = 600; /* non-aggressive */
++		(void)lan78xx_set_eee(net, &edata);
++	}
++
+ 	/* for Link Check */
+ 	if (dev->urb_intr) {
+ 		ret = usb_submit_urb(dev->urb_intr, GFP_KERNEL);