brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 238 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0072-RaspiDAC3-support.patch b/target/linux/brcm2708/patches-4.14/950-0072-RaspiDAC3-support.patch
new file mode 100644
index 0000000000..a6ccdbac45
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0072-RaspiDAC3-support.patch
@@ -0,0 +1,238 @@
+From 478195495a0753278414ad5f7ecdfd9b50432c6b Mon Sep 17 00:00:00 2001
+From: Jan Grulich <jan@grulich.eu>
+Date: Mon, 24 Aug 2015 16:03:47 +0100
+Subject: [PATCH 072/454] RaspiDAC3 support
+
+Signed-off-by: Jan Grulich <jan@grulich.eu>
+
+config: fix RaspiDAC Rev.3x dependencies
+
+Change depends to SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+like the other I2S soundcard drivers.
+
+Signed-off-by: Matthias Reichl <hias@horus.com>
+---
+ sound/soc/bcm/Kconfig     |   8 ++
+ sound/soc/bcm/Makefile    |   2 +
+ sound/soc/bcm/raspidac3.c | 186 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 196 insertions(+)
+ create mode 100644 sound/soc/bcm/raspidac3.c
+
+--- a/sound/soc/bcm/Kconfig
++++ b/sound/soc/bcm/Kconfig
+@@ -66,3 +66,11 @@ config SND_BCM2708_SOC_IQAUDIO_DAC
+ 	select SND_SOC_PCM512x_I2C
+ 	help
+ 	  Say Y or M if you want to add support for IQaudIO-DAC.
++
++config SND_BCM2708_SOC_RASPIDAC3
++	tristate "Support for RaspiDAC Rev.3x"
++	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
++	select SND_SOC_PCM512x_I2C
++	select SND_SOC_TPA6130A2
++	help
++	  Say Y or M if you want to add support for RaspiDAC Rev.3x.
+--- a/sound/soc/bcm/Makefile
++++ b/sound/soc/bcm/Makefile
+@@ -16,6 +16,7 @@ snd-soc-hifiberry-digi-objs := hifiberry
+ snd-soc-rpi-dac-objs := rpi-dac.o
+ snd-soc-rpi-proto-objs := rpi-proto.o
+ snd-soc-iqaudio-dac-objs := iqaudio-dac.o
++snd-soc-raspidac3-objs := raspidac3.o
+ 
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o
+@@ -24,3 +25,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D
+ obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o
+ obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
+ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
++obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o
+--- /dev/null
++++ b/sound/soc/bcm/raspidac3.c
+@@ -0,0 +1,186 @@
++/*
++ * ASoC Driver for RaspiDAC v3
++ *
++ * Author:	Jan Grulich <jan@grulich.eu>
++ *		Copyright 2015
++ *              based on code by Daniel Matuschek <daniel@hifiberry.com>
++ *		based on code by Florian Meier <florian.meier@koalo.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/jack.h>
++#include <sound/soc-dapm.h>
++
++#include "../codecs/pcm512x.h"
++#include "../codecs/tpa6130a2.h"
++
++/* sound card init */
++static int snd_rpi_raspidac3_init(struct snd_soc_pcm_runtime *rtd)
++{
++	int ret;
++	struct snd_soc_card *card = rtd->card;
++	struct snd_soc_codec *codec = rtd->codec;
++	snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08);
++	snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02);
++	snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00);
++
++	ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207);
++	if (ret < 0)
++		dev_warn(card->dev, "Failed to set volume limit: %d\n", ret);
++	else {
++		struct snd_kcontrol *kctl;
++
++		ret = snd_soc_limit_volume(card,
++					   "TPA6130A2 Headphone Playback Volume",
++					   54);
++		if (ret < 0)
++			dev_warn(card->dev, "Failed to set TPA6130A2 volume limit: %d\n",
++				 ret);
++		kctl = snd_soc_card_get_kcontrol(card,
++						 "TPA6130A2 Headphone Playback Volume");
++		if (kctl) {
++			strcpy(kctl->id.name, "Headphones Playback Volume");
++			/* disable the volume dB scale so alsamixer works */
++			kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE;
++		}
++
++		kctl = snd_soc_card_get_kcontrol(card,
++						 "TPA6130A2 Headphone Playback Switch");
++		if (kctl)
++			strcpy(kctl->id.name, "Headphones Playback Switch");
++	}
++
++	return 0;
++}
++
++/* set hw parameters */
++static int snd_rpi_raspidac3_hw_params(struct snd_pcm_substream *substream,
++				       struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++
++	unsigned int sample_bits =
++		snd_pcm_format_physical_width(params_format(params));
++
++	return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
++}
++
++/* startup */
++static int snd_rpi_raspidac3_startup(struct snd_pcm_substream *substream) {
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_codec *codec = rtd->codec;
++	snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08);
++	return 0;
++}
++
++/* shutdown */
++static void snd_rpi_raspidac3_shutdown(struct snd_pcm_substream *substream) {
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_codec *codec = rtd->codec;
++	snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00);
++}
++
++/* machine stream operations */
++static struct snd_soc_ops snd_rpi_raspidac3_ops = {
++	.hw_params = snd_rpi_raspidac3_hw_params,
++	.startup = snd_rpi_raspidac3_startup,
++	.shutdown = snd_rpi_raspidac3_shutdown,
++};
++
++/* interface setup */
++static struct snd_soc_dai_link snd_rpi_raspidac3_dai[] = {
++{
++	.name		= "RaspiDAC Rev.3x",
++	.stream_name	= "RaspiDAC HiFi",
++	.cpu_dai_name	= "bcm2708-i2s.0",
++	.codec_dai_name	= "pcm512x-hifi",
++	.platform_name	= "bcm2708-i2s.0",
++	.codec_name	= "pcm512x.1-004c",
++	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
++				SND_SOC_DAIFMT_CBS_CFS,
++	.ops		= &snd_rpi_raspidac3_ops,
++	.init		= snd_rpi_raspidac3_init,
++},
++};
++
++/* audio machine driver */
++static struct snd_soc_card snd_rpi_raspidac3 = {
++	.name         = "RaspiDAC Rev.3x HiFi Audio Card",
++	.owner        = THIS_MODULE,
++	.dai_link     = snd_rpi_raspidac3_dai,
++	.num_links    = ARRAY_SIZE(snd_rpi_raspidac3_dai),
++};
++
++/* sound card test */
++static int snd_rpi_raspidac3_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++
++	snd_rpi_raspidac3.dev = &pdev->dev;
++
++	if (pdev->dev.of_node) {
++	    struct device_node *i2s_node;
++	    struct snd_soc_dai_link *dai = &snd_rpi_raspidac3_dai[0];
++	    i2s_node = of_parse_phandle(pdev->dev.of_node,
++					"i2s-controller", 0);
++
++	    if (i2s_node) {
++		dai->cpu_dai_name = NULL;
++		dai->cpu_of_node = i2s_node;
++		dai->platform_name = NULL;
++		dai->platform_of_node = i2s_node;
++	    }
++	}
++
++	ret = snd_soc_register_card(&snd_rpi_raspidac3);
++	if (ret && ret != -EPROBE_DEFER)
++		dev_err(&pdev->dev,
++			"snd_soc_register_card() failed: %d\n", ret);
++
++	return ret;
++}
++
++/* sound card disconnect */
++static int snd_rpi_raspidac3_remove(struct platform_device *pdev)
++{
++	return snd_soc_unregister_card(&snd_rpi_raspidac3);
++}
++
++static const struct of_device_id raspidac3_of_match[] = {
++	{ .compatible = "jg,raspidacv3", },
++	{},
++};
++MODULE_DEVICE_TABLE(of, raspidac3_of_match);
++
++/* sound card platform driver */
++static struct platform_driver snd_rpi_raspidac3_driver = {
++	.driver = {
++		.name   = "snd-rpi-raspidac3",
++		.owner  = THIS_MODULE,
++		.of_match_table = raspidac3_of_match,
++	},
++	.probe          = snd_rpi_raspidac3_probe,
++	.remove         = snd_rpi_raspidac3_remove,
++};
++
++module_platform_driver(snd_rpi_raspidac3_driver);
++
++MODULE_AUTHOR("Jan Grulich <jan@grulich.eu>");
++MODULE_DESCRIPTION("ASoC Driver for RaspiDAC Rev.3x");
++MODULE_LICENSE("GPL v2");