brcm2708: remove linux 4.1 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48766

1 files changed, 0 insertions, 281 deletions

diff --git a/target/linux/brcm2708/patches-4.1/0135-thermal-bcm2835-Use-firmware-API.patch b/target/linux/brcm2708/patches-4.1/0135-thermal-bcm2835-Use-firmware-API.patch
deleted file mode 100644
index 2a076daae1..0000000000
--- a/target/linux/brcm2708/patches-4.1/0135-thermal-bcm2835-Use-firmware-API.patch
+++ /dev/null
@@ -1,281 +0,0 @@
-From 9ad0d5fce4faf445bf5f6020df570f6cf6c17167 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Mon, 20 Jul 2015 12:17:10 +0200
-Subject: [PATCH 135/222] thermal: bcm2835: Use firmware API
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use the new firmware API instead of the legacy mailbox API.
-Remove retry loop on failure to read temperature.
-Clean up code.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- arch/arm/boot/dts/bcm2708_common.dtsi |   1 +
- drivers/thermal/bcm2835-thermal.c     | 197 +++++++++++++---------------------
- 2 files changed, 75 insertions(+), 123 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2708_common.dtsi
-+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
-@@ -230,6 +230,7 @@
- 
- 		thermal: thermal {
- 			compatible = "brcm,bcm2835-thermal";
-+			firmware = <&firmware>;
- 		};
- 	};
- 
---- a/drivers/thermal/bcm2835-thermal.c
-+++ b/drivers/thermal/bcm2835-thermal.c
-@@ -12,161 +12,113 @@
- * consent.
- *****************************************************************************/
- 
--#include <linux/kernel.h>
- #include <linux/module.h>
--#include <linux/init.h>
--#include <linux/platform_data/mailbox-bcm2708.h>
- #include <linux/platform_device.h>
--#include <linux/slab.h>
--#include <linux/sysfs.h>
- #include <linux/thermal.h>
-+#include <soc/bcm2835/raspberrypi-firmware.h>
- 
--
--/* --- DEFINITIONS --- */
--#define MODULE_NAME "bcm2835_thermal"
--
--/*#define THERMAL_DEBUG_ENABLE*/
--
--#ifdef THERMAL_DEBUG_ENABLE
--#define print_debug(fmt,...) printk(KERN_INFO "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
--#else
--#define print_debug(fmt,...)
--#endif
--#define print_err(fmt,...) printk(KERN_ERR "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
--
--#define VC_TAG_GET_TEMP 0x00030006
--#define VC_TAG_GET_MAX_TEMP 0x0003000A
--
--typedef enum {
--	TEMP,
--	MAX_TEMP,
--} temp_type;
--
--/* --- STRUCTS --- */
--/* tag part of the message */
--struct vc_msg_tag {
--	uint32_t tag_id;		/* the tag ID for the temperature */
--	uint32_t buffer_size;	/* size of the buffer (should be 8) */
--	uint32_t request_code;	/* identifies message as a request (should be 0) */
--	uint32_t id;			/* extra ID field (should be 0) */
--	uint32_t val;			/* returned value of the temperature */
--};
--
--/* message structure to be sent to videocore */
--struct vc_msg {
--	uint32_t msg_size;		/* simply, sizeof(struct vc_msg) */
--	uint32_t request_code;		/* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */
--	struct vc_msg_tag tag;		/* the tag structure above to make */
--	uint32_t end_tag;		/* an end identifier, should be set to NULL */
--};
--
--struct bcm2835_thermal_data {
--	struct thermal_zone_device *thermal_dev;
--	struct vc_msg msg;
--};
--
--/* --- GLOBALS --- */
--static struct bcm2835_thermal_data bcm2835_data;
--
--/* Thermal Device Operations */
--static struct thermal_zone_device_ops ops;
--
--/* --- FUNCTIONS --- */
--
--static int bcm2835_get_temp_or_max(struct thermal_zone_device *thermal_dev, unsigned long *temp, unsigned tag_id)
-+static int bcm2835_thermal_get_property(struct thermal_zone_device *tz,
-+					unsigned long *temp, u32 tag)
- {
--	int result = -1, retry = 3;
--	print_debug("IN");
-+	struct rpi_firmware *fw = tz->devdata;
-+	struct {
-+		u32 id;
-+		u32 val;
-+	} packet;
-+	int ret;
- 
- 	*temp = 0;
--	while (result != 0 && retry-- > 0) {
--		/* wipe all previous message data */
--		memset(&bcm2835_data.msg, 0, sizeof bcm2835_data.msg);
--
--		/* prepare message */
--		bcm2835_data.msg.msg_size = sizeof bcm2835_data.msg;
--		bcm2835_data.msg.tag.buffer_size = 8;
--		bcm2835_data.msg.tag.tag_id = tag_id;
--
--		/* send the message */
--		result = bcm_mailbox_property(&bcm2835_data.msg, sizeof bcm2835_data.msg);
--		print_debug("Got %stemperature as %u (%d,%x)\n", tag_id==VC_TAG_GET_MAX_TEMP ? "max ":"", (uint)bcm2835_data.msg.tag.val, result, bcm2835_data.msg.request_code);
--		if (!(bcm2835_data.msg.request_code & 0x80000000))
--			result = -1;
-+	packet.id = 0;
-+	ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet));
-+	if (ret) {
-+		dev_err(&tz->device, "Failed to get temperature\n");
-+		return ret;
- 	}
- 
--	/* check if it was all ok and return the rate in milli degrees C */
--	if (result == 0)
--		*temp = (uint)bcm2835_data.msg.tag.val;
--	else
--		print_err("Failed to get temperature! (%x:%d)\n", tag_id, result);
--	print_debug("OUT");
--	return result;
-+	*temp = packet.val;
-+	dev_dbg(&tz->device, "%stemp=%lu\n",
-+		tag == RPI_FIRMWARE_GET_MAX_TEMPERATURE ? "max" : "", *temp);
-+
-+	return 0;
- }
- 
--static int bcm2835_get_temp(struct thermal_zone_device *thermal_dev, unsigned long *temp)
-+static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz,
-+				    unsigned long *temp)
- {
--	return bcm2835_get_temp_or_max(thermal_dev, temp, VC_TAG_GET_TEMP);
-+	return bcm2835_thermal_get_property(tz, temp,
-+					    RPI_FIRMWARE_GET_TEMPERATURE);
- }
- 
--static int bcm2835_get_max_temp(struct thermal_zone_device *thermal_dev, int trip_num, unsigned long *temp)
-+static int bcm2835_thermal_get_max_temp(struct thermal_zone_device *tz,
-+					int trip, unsigned long *temp)
- {
--	return bcm2835_get_temp_or_max(thermal_dev, temp, VC_TAG_GET_MAX_TEMP);
-+	/*
-+	 * The maximum safe temperature of the SoC.
-+	 * Overclock may be disabled above this temperature.
-+	 */
-+	return bcm2835_thermal_get_property(tz, temp,
-+					    RPI_FIRMWARE_GET_MAX_TEMPERATURE);
- }
- 
--static int bcm2835_get_trip_type(struct thermal_zone_device * thermal_dev, int trip_num, enum thermal_trip_type *trip_type)
-+static int bcm2835_thermal_get_trip_type(struct thermal_zone_device *tz,
-+					 int trip, enum thermal_trip_type *type)
- {
--	*trip_type = THERMAL_TRIP_HOT;
-+	*type = THERMAL_TRIP_HOT;
-+
- 	return 0;
- }
- 
--
--static int bcm2835_get_mode(struct thermal_zone_device *thermal_dev, enum thermal_device_mode *dev_mode)
-+static int bcm2835_thermal_get_mode(struct thermal_zone_device *tz,
-+				    enum thermal_device_mode *mode)
- {
--	*dev_mode = THERMAL_DEVICE_ENABLED;
-+	*mode = THERMAL_DEVICE_ENABLED;
-+
- 	return 0;
- }
- 
-+static struct thermal_zone_device_ops ops  = {
-+	.get_temp = bcm2835_thermal_get_temp,
-+	.get_trip_temp = bcm2835_thermal_get_max_temp,
-+	.get_trip_type = bcm2835_thermal_get_trip_type,
-+	.get_mode = bcm2835_thermal_get_mode,
-+};
- 
- static int bcm2835_thermal_probe(struct platform_device *pdev)
- {
--	print_debug("IN");
--	print_debug("THERMAL Driver has been probed!");
--
--	/* check that the device isn't null!*/
--	if(pdev == NULL)
--	{
--		print_debug("Platform device is empty!");
--		return -ENODEV;
-+	struct device_node *fw_np;
-+	struct rpi_firmware *fw;
-+	struct thermal_zone_device *tz;
-+
-+	fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
-+/* Remove comment when booting without Device Tree is no longer supported
-+	if (!fw_np) {
-+		dev_err(&pdev->dev, "Missing firmware node\n");
-+		return -ENOENT;
- 	}
--
--	if(!(bcm2835_data.thermal_dev = thermal_zone_device_register("bcm2835_thermal",  1, 0, NULL, &ops, NULL, 0, 0)))
--	{
--		print_debug("Unable to register the thermal device!");
--		return -EFAULT;
-+*/
-+	fw = rpi_firmware_get(fw_np);
-+	if (!fw)
-+		return -EPROBE_DEFER;
-+
-+	tz = thermal_zone_device_register("bcm2835_thermal", 1, 0, fw, &ops,
-+					  NULL, 0, 0);
-+	if (IS_ERR(tz)) {
-+		dev_err(&pdev->dev, "Failed to register the thermal device\n");
-+		return PTR_ERR(tz);
- 	}
-+
-+	platform_set_drvdata(pdev, tz);
-+
- 	return 0;
- }
- 
--
- static int bcm2835_thermal_remove(struct platform_device *pdev)
- {
--	print_debug("IN");
--
--	thermal_zone_device_unregister(bcm2835_data.thermal_dev);
--
--	print_debug("OUT");
-+	thermal_zone_device_unregister(platform_get_drvdata(pdev));
- 
- 	return 0;
- }
- 
--static struct thermal_zone_device_ops ops  = {
--	.get_temp = bcm2835_get_temp,
--	.get_trip_temp = bcm2835_get_max_temp,
--	.get_trip_type = bcm2835_get_trip_type,
--	.get_mode = bcm2835_get_mode,
--};
--
- static const struct of_device_id bcm2835_thermal_of_match_table[] = {
- 	{ .compatible = "brcm,bcm2835-thermal", },
- 	{},
-@@ -177,14 +129,13 @@ static struct platform_driver bcm2835_th
- 	.probe = bcm2835_thermal_probe,
- 	.remove = bcm2835_thermal_remove,
- 	.driver = {
--				.name = "bcm2835_thermal",
--				.owner = THIS_MODULE,
--				.of_match_table = bcm2835_thermal_of_match_table,
--			},
-+		.name = "bcm2835_thermal",
-+		.of_match_table = bcm2835_thermal_of_match_table,
-+	},
- };
-+module_platform_driver(bcm2835_thermal_driver);
- 
--MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Dorian Peake");
-+MODULE_AUTHOR("Noralf Trønnes");
- MODULE_DESCRIPTION("Thermal driver for bcm2835 chip");
--
--module_platform_driver(bcm2835_thermal_driver);
-+MODULE_LICENSE("GPL");