remove the brcm-2.4 target, it will no longer be supported in future releases. please use brcm47xx with broadcom-wl instead

SVN-Revision: 21946

1 files changed, 0 insertions, 100 deletions

diff --git a/target/linux/brcm-2.4/patches/012-aec62xx.patch b/target/linux/brcm-2.4/patches/012-aec62xx.patch
deleted file mode 100644
index 7010daf23c..0000000000
--- a/target/linux/brcm-2.4/patches/012-aec62xx.patch
+++ /dev/null
@@ -1,100 +0,0 @@
---- a/drivers/ide/pci/aec62xx.c
-+++ b/drivers/ide/pci/aec62xx.c
-@@ -3,6 +3,8 @@
-  *
-  * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
-  *
-+ * With Broadcom 4780 patches
-+ *
-  */
- 
- #include <linux/module.h>
-@@ -329,7 +331,11 @@ static int aec62xx_config_drive_xfer_rat
- 	ide_hwif_t *hwif	= HWIF(drive);
- 	struct hd_driveid *id	= drive->id;
- 
-+#ifndef CONFIG_BCM947XX
- 	if ((id->capability & 1) && drive->autodma) {
-+#else
-+	if (1) {
-+#endif
- 		/* Consult the list of known "bad" drives */
- 		if (hwif->ide_dma_bad_drive(drive))
- 			goto fast_ata_pio;
-@@ -414,10 +420,60 @@ static unsigned int __init init_chipset_
- {
- 	int bus_speed = system_bus_clock();
- 
-+#ifndef CONFIG_BCM947XX
- 	if (dev->resource[PCI_ROM_RESOURCE].start) {
- 		pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
- 		printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
- 	}
-+#else
-+	if (dev->resource[PCI_ROM_RESOURCE].start) {
-+		pci_write_config_dword(dev, PCI_ROM_ADDRESS,
-+					dev->resource[PCI_ROM_RESOURCE].
-+					start | PCI_ROM_ADDRESS_ENABLE);
-+	} else {
-+		pci_write_config_dword(dev, PCI_ROM_ADDRESS,
-+					dev->resource[PCI_ROM_RESOURCE].
-+					start);
-+	}
-+
-+	/* Set IDE controller parameters manually - FIXME: replace magic values */
-+	{
-+		byte setting;
-+
-+		pci_write_config_word(dev, PCI_COMMAND, 0x0007);
-+		//pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x5A);
-+		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x13);
-+
-+		pci_write_config_byte(dev, 0x40, 0x31);
-+		pci_write_config_byte(dev, 0x41, 0x31);
-+		pci_write_config_byte(dev, 0x42, 0x31);
-+		pci_write_config_byte(dev, 0x43, 0x31);
-+		// Set IDE Command Speed
-+		pci_write_config_byte(dev, 0x48, 0x31);
-+
-+		// Disable WriteSubSysID & PIOROM
-+		pci_read_config_byte(dev, 0x49, &setting);
-+		setting &= 0x07;
-+		pci_write_config_byte(dev, 0x49, setting);
-+
-+		// Enable PCI burst & INTA & PCI memory read multiple, FIFO threshold=80
-+		pci_read_config_byte(dev, 0x4A, &setting);
-+		//setting = (setting & 0xFE) | 0xA8;
-+		setting = (setting & 0xFE) | 0xD8;
-+		setting = (setting & 0xF7);
-+		pci_write_config_byte(dev, 0x4A, setting);
-+
-+		//pci_write_config_byte(dev, 0x4B, 0x20);
-+		pci_write_config_byte(dev, 0x4B, 0x2C);
-+		//pci_write_config_byte(dev, 0x4B, 0x0C);
-+
-+		// Set PreRead count: 512 byte
-+		pci_write_config_byte(dev, 0x4C, 0);
-+		pci_write_config_word(dev, 0x4D, 0x0002);
-+		pci_write_config_byte(dev, 0x54, 0);
-+		pci_write_config_word(dev, 0x55, 0x0002);
-+	}
-+#endif
- 
- #if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)
- 	aec_devs[n_aec_devs++] = dev;
-@@ -500,6 +556,7 @@ static void __init init_setup_aec62xx (s
- 
- static void __init init_setup_aec6x80 (struct pci_dev *dev, ide_pci_device_t *d)
- {
-+#ifndef CONFIG_BCM947XX /* Causes OOPS on BCM4780 */
- 	unsigned long bar4reg = pci_resource_start(dev, 4);
- 
- 	if (inb(bar4reg+2) & 0x10) {
-@@ -512,6 +569,7 @@ static void __init init_setup_aec6x80 (s
- 			strcpy(d->name, "AEC6280R");
- 	}
- 
-+#endif
- 	ide_setup_pci_device(dev, d);
- }
-