remove the brcm-2.4 target, it will no longer be supported in future releases. please use brcm47xx with broadcom-wl instead

SVN-Revision: 21946

12 files changed, 0 insertions, 461 deletions

diff --git a/target/linux/brcm-2.4/base-files/etc/diag.sh b/target/linux/brcm-2.4/base-files/etc/diag.sh
deleted file mode 100644
index 3b08554c64..0000000000
--- a/target/linux/brcm-2.4/base-files/etc/diag.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-set_led() {
-	local led="$1"
-	local state="$2"
-	[ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
-}
-
-set_state() {
-	case "$1" in
-		preinit)
-			set_led dmz 1
-			set_led diag 1
-			set_led power 0
-		;;
-		failsafe)
-			set_led diag f
-			set_led power f
-			set_led dmz f
-		;;
-		done)
-			set_led dmz 0
-			set_led diag 0
-			set_led power 1
-		;;
-	esac
-}
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
deleted file mode 100755
index d7839b6b49..0000000000
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ /dev/null
@@ -1,248 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
-	[ -e /etc/config/network ] && {
-		local batch
-
-		config_cb() {
-			case "$1" in
-			switch)
-				option_cb() {
-					case "$1" in
-					vlan[0-9]|vlan1[0-5])
-						local id="${1#vlan}"
-						local ports="${2%\*}"
-						append batch "delete network.eth0.${1}${N}"
-						append batch "set network.eth0_${id}=switch_vlan${N}"
-						append batch "set network.eth0_${id}.device=eth0${N}"
-						append batch "set network.eth0_${id}.vlan=${id}${N}"
-						append batch "set network.eth0_${id}.ports='${ports}'${N}"
-					;;
-					esac
-				}
-			;;
-			switch_vlan)
-				option_cb() { :; }
-				batch=""
-			;;
-			esac
-		}
-
-		config_load network
-
-		[ -n "$batch" ] && {
-			logger -t netconfig "migrating switch config to new format ..."
-			echo "$batch${N}commit network" | uci batch
-		}
-
-		exit 0
-	}
-
-	mkdir -p /etc/config
-
-	(
-		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
-			# WGT634u
-			echo boardtype=wgt634u
-		else
-			strings "$(find_mtd_part nvram)"
-		fi
-	) | awk '
-	function p(cfgname, name) {
-		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
-	}
-
-	function vlan(id, name) {
-		if (c[name] != "") {
-			print "config switch_vlan eth0_" id
-			print "	option device   \"eth0\""
-			print "	option vlan     " id
-			print "	option ports    \"" c[name] "\""
-			print ""
-		}
-	}
-
-	function macinc(mac, maca, i, result) {
-		split(mac, maca, ":")
-		for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
-		if (++maca[6] > 0xff) {
-			maca[5]++
-			maca[6] = 0
-		}
-		for (i = 1; i <= 6; i++) {
-			if (i != 1) result = result ":"
-			result = result sprintf("%02x", maca[i])
-		}
-		return result
-	}
-
-	BEGIN {
-		FS="="
-		c["lan_ifname"]="eth0.0"
-		c["wan_ifname"]="eth0.1"
-		c["vlan0ports"]="1 2 3 4 5"
-		c["vlan1ports"]="0 5"
-		getline < "/proc/diag/model"
-		model=$0
-		for (i = 0; i < 6; i++) {
-			if (mac_check != "") mac_check = mac_check ":"
-			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
-		}
-	}
-
-	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
-		nvram[$1] = $2
-	}
-
-	END {
-		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
-			c["wan_ifname"] = ""
-			c["lan_ifname"] = "eth1"
-		}
-		if (model == "ASUS WL-330gE") {
-			c["wan_ifname"] = ""
-			c["lan_ifname"] = "eth0"
-			c["vlan0ports"] = ""
-			c["vlan1ports"] = ""
-		}
-		if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
-			c["wan_ifname"] = "eth1"
-			c["lan_ifname"] = "eth0"
-		}
-		if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
-			c["vlan0ports"] = "0 1 2 3 5"
-			c["vlan1ports"] = "4 5"
-		}
-		if (model == "Dell TrueMobile 2300") {
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-			c["vlan0ports"] = "0 1 2 3 4 5u"
-			c["vlan1ports"] = ""
-		}
-		if (nvram["boardtype"] == "bcm94710r4") {
-			# Toshiba WRC-1000
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-		}
-		if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
-			c["vlan0ports"] = "0 1 2 3 5"
-			c["vlan1ports"] = "4 5"
-		}
-		if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
-			if (nvram["boardnum"] == "45") {
-				# WL-500gP
-				c["vlan0ports"] = "1 2 3 4 5"
-				c["vlan1ports"] = "0 5"
-			} else {
-				# Generic BCM94704
-				c["vlan0ports"] = "0 1 2 3 4 5u"
-				c["vlan1ports"] = ""
-				c["lan_ifname"] = "eth0"
-				c["wan_ifname"] = "eth1"
-
-				# MAC addresses on 4704 tend to be screwed up. Add a workaround here
-				if (nvram["et0macaddr"] ~ mac_check) {
-					c["lan_macaddr"] = nvram["et0macaddr"]
-					c["wan_macaddr"] = macinc(c["lan_macaddr"])
-				}
-			}
-		}
-		# Buffalo WBR-B11 and Buffalo WBR-G54
-		if (nvram["boardtype"] == "bcm94710ap") {
-			c["vlan0ports"] = "0 1 2 3 4 5u"
-			c["vlan1ports"] = ""
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-		}
-		# generic broadcom 4705/4785 processor with 5397 switch?
-		#  EXCEPT Linksys WRT300N V1.1
-		if ((nvram["boardtype"] == "0x478") && \
-		    (model != "Linksys WRT300N V1.1")) {
-			c["vlan0ports"] = "1 2 3 4 8*"
-			c["vlan1ports"] = "0 8"
-		}
-
-		# WAP54G
-		if ((nvram["boardnum"] == "2") || \
-			(nvram["boardnum"] == "1024")) {
-			c["lan_ifname"]="eth0"
-			c["wan_ifname"]=""
-		}
-
-		# Sitecom WL-105b
-		if ((nvram["boardum"] == "2") && \
-			(nvram["GemtekPmonVer"] == "1")) {
-			c["lan_ifname"]="eth0"
-			c["wan_ifname"]=""
-		}
-
-		# ASUS WL-700gE
-		# These are actually same as defaults above. For some reason this script applies
-		# Generic BCM94704 settings instead so we revert to proper settings here.
-		# Hopefully someone will fix this properly soon.
-		if (model == "ASUS WL-700gE") {
-			c["lan_ifname"]="eth0.0"
-			c["wan_ifname"]="eth0.1"
-			c["vlan0ports"]="1 2 3 4 5"
-			c["vlan1ports"]="0 5"
-		}
-
-		if (model == "Motorola WR850G V2/V3") {
-			c["vlan0ports"]="0 1 2 3 5"
-			c["vlan1ports"]="4 5"
-		}
-		if (model == "ASUS WL-500W") {
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-			c["vlan0ports"] = "0 1 2 3 4 5u"
-			c["vlan1ports"] = ""
-		}
-		if (model == "OvisLink WL-1600GL") {
-			c["lan_ifname"] = "eth0.0"
-			c["wan_ifname"] = "eth0.1"
-			c["vlan0ports"] = "0 1 2 3 5"
-			c["vlan1ports"] = "4 5"
-		}
-
-		if (c["vlan0ports"] || c["vlan1ports"]) {
-			print "#### VLAN configuration "
-			print "config switch eth0"
-			print "	option enable   1"
-			print ""		
-			vlan(0, "vlan0ports")
-			vlan(1, "vlan1ports")
-		}
-		print "#### Loopback configuration"
-		print "config interface loopback"
-		print "	option ifname	\"lo\""
-		print "	option proto	static"
-		print "	option ipaddr	127.0.0.1"
-		print "	option netmask	255.0.0.0"
-		print ""
-		print ""
-		print "#### LAN configuration"
-		print "config interface lan"
-		print "	option type 	bridge"
-		p("ifname", "lan_ifname")
-		p("macaddr", "lan_macaddr")
-		print "	option proto	static"
-		print "	option ipaddr	192.168.1.1"
-		print "	option netmask	255.255.255.0"
-		print ""
-		print ""
-		if (c["wan_ifname"]) {
-			print "#### WAN configuration"
-			print "config interface	wan"
-			p("ifname", "wan_ifname")
-			p("macaddr", "wan_macaddr")
-			print "	option proto	dhcp"
-		} else {
-			print "#### WAN configuration (disabled)"
-			print "#config interface wan"
-			print "#	option proto	dhcp"
-		}
-	}' > /etc/config/network
-}
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/wmacfixup b/target/linux/brcm-2.4/base-files/etc/init.d/wmacfixup
deleted file mode 100755
index ee1b752201..0000000000
--- a/target/linux/brcm-2.4/base-files/etc/init.d/wmacfixup
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2010 OpenWrt.org
-
-START=41
-
-boot() {
-	[ -d /sys/class/ieee80211 ] || exit
-
-	commit=0
-
-	fixup_wmac() {
-		local cfg="$1"
-		local cfmac
-
-		config_get cfmac "$cfg" macaddr
-
-		[ "$cfmac" != "00:90:4c:5f:00:2a" ] || {
-			local nvmac="$(nvram get il0macaddr 2>/dev/null)"
-			[ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && {
-				uci set wireless.$cfg.macaddr="$nvmac"
-				commit=1
-			}
-		}
-	}
-
-	config_load wireless
-	config_foreach fixup_wmac wifi-device
-
-	[ "$commit" = 1 ] && uci commit wireless
-}
-
-start() { :; }
-stop()  { :; }
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm
deleted file mode 100644
index b0f4a4efa9..0000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-init_hotplug_failsafe() {
-	echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
-}
-
-boot_hook_add preinit_main init_hotplug_failsafe
-
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm
deleted file mode 100644
index 3cd760e2db..0000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-
-set_preinit_iface() {
-	ifname=eth0
-
-	insmod diag
-
-	# hardware specific overrides
-	case "$(cat /proc/diag/model)" in
-		"Linksys WAP54G V1") ifname=eth1;;
-		"ASUS WL-HDD") ifname=eth1;;
-		"ASUS WL-300g") ifname=eth1;;
-		"ASUS (unknown, BCM4702)") ifname=eth1;;
-		"Sitecom WL-105b") ifname=eth1;;
-	esac
-	ifconfig $ifname 0.0.0.0 up
-}
-
-check_module () {
-  module="$1"; shift; params="$*"
-
-  insmod "$module" "$params"
-  sleep 1
-  grep "^$module" /proc/modules
-  return $?
-}
-
-init_iface() {
-	check_module tg3
-	insmod switch-core
-	check_module switch-robo || check_module switch-adm  || { 
-	  check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
-	} || rmmod switch-core
-}
-
-boot_hook_add preinit_main set_preinit_iface
-boot_hook_add preinit_main init_iface
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm
deleted file mode 100644
index a93559f97b..0000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-failsafe_ip() {
-	[ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
-		ifconfig eth0 0.0.0.0 down
-		echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-	}
-	
-	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-        	ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
-        }
-}
-
-boot_hook_add failsafe failsafe_ip
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm
deleted file mode 100644
index fd5add16a5..0000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-do_mount_procfs() {
-	mount none /proc -t proc
-}
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm
deleted file mode 100644
index fdc7c71ca7..0000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-port_net_echo() {
-	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-		if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then 
-			netmsg $pi_broadcast "$1"
-		fi
-	}
-}
-
-preinit_ip_deconfig() {
-	if [ -z "$pi_ifname" ]; then
-		ifconfig $ifname 0.0.0.0 down
-	else
-		grep -q "$pi_ifname" /proc/net/dev && {
-			ifconfig $pi_ifname 0.0.0.0 down
-		}
-	fi
-}
-
-preinit_net_echo() {
-	preinit_ip
-	
-	[ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
-		echo 1 > /proc/switch/eth0/reset
-
-		# this would be easier if we blasted the message across all ports
-		# but we don't want packets leaking across interfaces
-		for port in $(seq 0 4); do {
-			echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-			port_net_echo $1
-		}; done
-		
-		echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-		
-	} || port_net_echo $1
-}
-
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_net_echo_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_net_echo_brcm
deleted file mode 100644
index f030cb2837..0000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_net_echo_brcm
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-indicate_failsafe() {
-	preinit_net_echo() {
-		port_net_echo $1
-	}
-	echo "- failsafe -"
-	preinit_net_echo "Entering Failsafe!\n"
-	indicate_failsafe_led
-}
-
-
diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm
deleted file mode 100644
index da721b8484..0000000000
--- a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh
-
-. /etc/functions.sh
-
-set_boot_wait() {
-	[ -x "/usr/sbin/nvram" ] && {
-		[ "$(nvram get boot_wait)" != "on" ] && {
-			nvram set boot_wait=on
-			nvram commit
-		}
-	}
-}
-
-boot_hook_add failsafe set_boot_wait
diff --git a/target/linux/brcm-2.4/base-files/lib/upgrade/platform.sh b/target/linux/brcm-2.4/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index 9921cf571a..0000000000
--- a/target/linux/brcm-2.4/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-PART_NAME=linux
-
-platform_check_image() {
-	[ "$ARGC" -gt 1 ] && return 1
-
-	case "$(get_magic_word "$1")" in
-		# .trx files
-		4844) return 0;;
-		*)
-			echo "Invalid image type. Please use only .trx files"
-			return 1
-		;;
-	esac
-}
-
-# use default for platform_do_upgrade()
diff --git a/target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe b/target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe
deleted file mode 100755
index 0544339de8..0000000000
--- a/target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-case "$1" in
-	button) kill -USR1 1;;
-esac