diff options
| author | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-12 19:51:22 +0200 |
|---|---|---|
| committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-15 20:58:16 +0200 |
| commit | 3d66e7f1db70c98876ea6e9aeb57622d6d30c5e8 (patch) | |
| tree | 35f33a9f4a369e8561de2209c3f70d3559e082e7 /target/linux/bmips/bcm6328/base-files/etc | |
| parent | b8bbe0d8006f086ab90ec0d304a4d1afdf91b1cb (diff) | |
| download | upstream-3d66e7f1db70c98876ea6e9aeb57622d6d30c5e8.tar.gz upstream-3d66e7f1db70c98876ea6e9aeb57622d6d30c5e8.tar.bz2 upstream-3d66e7f1db70c98876ea6e9aeb57622d6d30c5e8.zip | |
bmips: add support for Sercomm AD1018
The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with
two internal antennas.
Hardware:
- SoC: Broadcom BCM6328
- CPU: single core BMIPS4350 @ 320Mhz
- RAM: 64 MB (v1) / 128 MB (v2) DDR
- Flash: 128 MB NAND
- Ethernet LAN: 4x 100Mbit
- Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn
- USB: 1x 2.0
- Buttons: 3x (reset)
- LEDs: yes
- UART: yes
Installation via OEM web UI:
1. Use the admin credentials to login via web UI
2. Go to Managament->Update firmware and select the OpenWrt CFE firmware
3. Press "Update Firmware" button and wait some minutes until it finish
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 38ebb2eafde604ff6d9b0021d1d21208070a2d09)
Diffstat (limited to 'target/linux/bmips/bcm6328/base-files/etc')
| -rw-r--r-- | target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds | 16 | ||||
| -rw-r--r-- | target/linux/bmips/bcm6328/base-files/etc/board.d/02_network | 4 |
2 files changed, 20 insertions, 0 deletions
diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds new file mode 100644 index 0000000000..5ece1f7ba1 --- /dev/null +++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in +sercomm,ad1018) + ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network index c9c704067e..66f9282e48 100644 --- a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network +++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network @@ -10,6 +10,10 @@ comtrend,ar-5387un) ucidef_set_bridge_device switch ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ;; +sercomm,ad1018) + ucidef_set_bridge_device switch + ucidef_set_interface_lan "lan1 lan2 lan3 fibre" + ;; esac board_config_flush |