brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 100 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts b/target/linux/bcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts
new file mode 100644
index 0000000000..4498272887
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts
@@ -0,0 +1,100 @@
+/dts-v1/;
+
+#include "bcm6362.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SFR Neufbox 6 (Sercomm)";
+	compatible = "sfr,neufbox-6-sercomm-r0", "brcm,bcm6361", "brcm,bcm6362";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		service {
+			label = "service";
+			gpios = <&pinctrl 10 1>;
+			linux,code = <BTN_0>;
+			debounce-interval = <60>;
+		};
+
+		wlan {
+			label = "wlan";
+			gpios = <&pinctrl 12 1>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 24 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 25 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+
+	switch {
+		compatible = "realtek,rtl8367";
+		gpio-sda = <&pinctrl 18 0>;
+		gpio-sck = <&pinctrl 20 0>;
+
+		realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
+	};
+};
+
+&hsspi {
+	status = "ok";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cfe@0 {
+				reg = <0x000000 0x010000>;
+				label = "cfe";
+				read-only;
+			};
+
+			linux@10000 {
+				reg = <0x010000 0xfe0000>;
+				label = "linux";
+				compatible = "brcm,bcm963xx-imagetag";
+			};
+
+			nvram@ff0000 {
+				reg = <0xff0000 0x010000>;
+				label = "nvram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "ok";
+};