diff options
| author | Daniel Golle <daniel@makrotopia.org> | 2022-03-21 01:16:48 +0000 |
|---|---|---|
| committer | Paul Spooren <mail@aparcar.org> | 2022-03-21 11:36:30 +0000 |
| commit | 3a14580411adfb75f9a44eded9f41245b9e44606 (patch) | |
| tree | c3002cc1a0948bfedc4475d7276da0b3ebd4775c /target/linux/bcm53xx | |
| parent | 9f9477b2751231d57cdd8c227149b88c93491d93 (diff) | |
| download | upstream-3a14580411adfb75f9a44eded9f41245b9e44606.tar.gz upstream-3a14580411adfb75f9a44eded9f41245b9e44606.tar.bz2 upstream-3a14580411adfb75f9a44eded9f41245b9e44606.zip | |
kernel: delete Linux 5.4 config and patches
As the upcoming release will be based on Linux 5.10 only, remove all
kernel configuration as well as patches for Linux 5.4.
There were no targets still actively using Linux 5.4.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Diffstat (limited to 'target/linux/bcm53xx')
45 files changed, 0 insertions, 3948 deletions
diff --git a/target/linux/bcm53xx/config-5.4 b/target/linux/bcm53xx/config-5.4 deleted file mode 100644 index 46f9d36f8f..0000000000 --- a/target/linux/bcm53xx/config-5.4 +++ /dev/null @@ -1,367 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_BCM=y -CONFIG_ARCH_BCM_5301X=y -CONFIG_ARCH_BCM_53573=y -# CONFIG_ARCH_BCM_HR2 is not set -CONFIG_ARCH_BCM_IPROC=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_BINFMT_FLAT=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_HAS_KEEPINITRD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BCM47XX_NVRAM=y -CONFIG_BCM47XX_SPROM=y -CONFIG_BCM47XX_WDT=y -CONFIG_BCMA=y -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_DEBUG=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_SFLASH=y -# CONFIG_BCM_CYGNUS_PHY is not set -CONFIG_BCM_NET_PHYLIB=y -CONFIG_BCM_NS_THERMAL=y -CONFIG_BCM_SR_THERMAL=y -CONFIG_BGMAC=y -CONFIG_BGMAC_BCMA=y -# CONFIG_BGMAC_PLATFORM is not set -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -CONFIG_BROADCOM_PHY=y -CONFIG_CACHE_L2X0=y -CONFIG_CC_HAS_KASAN_GENERIC=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -CONFIG_CLKSRC_MMIO=y -# CONFIG_CLK_BCM_NS2 is not set -CONFIG_CLK_BCM_NSP=y -# CONFIG_CLK_BCM_SR is not set -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_IPROC=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BCM_5301X=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MISC=y -CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=0 -CONFIG_DEBUG_UART_PHYS=0x18000300 -CONFIG_DEBUG_UART_VIRT=0xf1000300 -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DEBUG_USER=y -CONFIG_DMA_REMAP=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EXTCON=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FW_LOADER_PAGED_BUF=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_HAVE_ARM_TWD=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PCI=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_BCM2835=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IO_URING=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BCM_IPROC=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BUS_MUX=y -# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set -CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_BCM47XXSFLASH=y -CONFIG_MTD_BCM47XX_PARTS=y -CONFIG_MTD_NAND_BRCMNAND=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_OF_PARTS_LINKSYS_NS=y -CONFIG_MTD_PARSER_TRX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NR_CPUS=2 -CONFIG_NVMEM=y -CONFIG_NVMEM_BRCM_NVRAM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCIE_IPROC=y -CONFIG_PCIE_IPROC_BCMA=y -# CONFIG_PCIE_IPROC_PLATFORM is not set -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_PHY_BCM_NS_USB2 is not set -# CONFIG_PHY_BCM_NS_USB3 is not set -# CONFIG_PHY_BCM_SR_PCIE is not set -CONFIG_PHY_BCM_SR_USB=y -# CONFIG_PHY_BRCM_SATA is not set -# CONFIG_PHY_NS2_USB_DRD is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_IPROC_GPIO is not set -CONFIG_PINCTRL_NS=y -# CONFIG_PINCTRL_NS2_MUX is not set -CONFIG_PWM=y -CONFIG_PWM_BCM_IPROC=y -CONFIG_PWM_SYSFS=y -CONFIG_RATIONAL=y -CONFIG_REFCOUNT_FULL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BCM_QSPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_B53=y -CONFIG_SWCONFIG_B53_PHY_DRIVER=y -CONFIG_SWCONFIG_B53_PHY_FIXUP=y -CONFIG_SWCONFIG_B53_SRAB_DRIVER=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -# CONFIG_VFP is not set -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/bcm53xx/patches-5.4/030-v5.5-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch b/target/linux/bcm53xx/patches-5.4/030-v5.5-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch deleted file mode 100644 index 67e85da61f..0000000000 --- a/target/linux/bcm53xx/patches-5.4/030-v5.5-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 984829e2d39b5ba9f817198d701c85511ef40528 Mon Sep 17 00:00:00 2001 -From: Dan Haab <dan.haab@legrand.com> -Date: Wed, 2 Oct 2019 09:57:26 -0600 -Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000 - -It's a simple network device based on BCM47094 with just a single -Ethernet port. - -Signed-off-by: Dan Haab <dan.haab@legrand.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 53 +++++++++++++++++++ - 2 files changed, 54 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -113,6 +113,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47094-luxul-abr-4500.dtb \ - bcm47094-luxul-xap-1610.dtb \ - bcm47094-luxul-xbr-4500.dtb \ -+ bcm47094-luxul-xwc-2000.dtb \ - bcm47094-luxul-xwr-3100.dtb \ - bcm47094-luxul-xwr-3150-v1.dtb \ - bcm47094-netgear-r8500.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -0,0 +1,53 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright 2019 Legrand AV Inc. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47094.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "Luxul XWC-2000 V1"; -+ -+ chosen { -+ bootargs = "earlycon"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x18000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ status { -+ label = "bcm53xx:green:status"; -+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "timer"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&uart1 { -+ status = "okay"; -+}; -+ -+&spi_nor { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-5.4/031-v5.8-ARM-dts-BCM5301X-Add-missing-memory-device_type-for-.patch b/target/linux/bcm53xx/patches-5.4/031-v5.8-ARM-dts-BCM5301X-Add-missing-memory-device_type-for-.patch deleted file mode 100644 index 43a719a7a8..0000000000 --- a/target/linux/bcm53xx/patches-5.4/031-v5.8-ARM-dts-BCM5301X-Add-missing-memory-device_type-for-.patch +++ /dev/null @@ -1,30 +0,0 @@ -From de1f6d9304c38e414552c3565d36286609ced0c1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 8 Jun 2020 18:33:41 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Add missing memory "device_type" for - Luxul XWC-2000 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This property is needed since commit abe60a3a7afb ("ARM: dts: Kill off -skeleton{64}.dtsi"). Without it booting silently hangs at: -[ 0.000000] Memory policy: Data cache writealloc - -Fixes: 984829e2d39b ("ARM: dts: BCM5301X: Add DT for Luxul XWC-2000") -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -17,6 +17,7 @@ - }; - - memory { -+ device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; - }; diff --git a/target/linux/bcm53xx/patches-5.4/032-v5.9-ARM-dts-BCM5301X-Specify-switch-ports-for-Luxul-devi.patch b/target/linux/bcm53xx/patches-5.4/032-v5.9-ARM-dts-BCM5301X-Specify-switch-ports-for-Luxul-devi.patch deleted file mode 100644 index a2f05d3d9f..0000000000 --- a/target/linux/bcm53xx/patches-5.4/032-v5.9-ARM-dts-BCM5301X-Specify-switch-ports-for-Luxul-devi.patch +++ /dev/null @@ -1,301 +0,0 @@ -From 99e5a32902d9e144568add5dd8791aa66a69f0bf Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 8 Jun 2020 11:37:33 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for Luxul devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -All those devices use standard BCM53011 (rev 5) or BCM53012 (rev 0). - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 25 ++++++++++++ - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 20 ++++++++++ - arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 20 ++++++++++ - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 40 +++++++++++++++++++ - arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 25 ++++++++++++ - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 20 ++++++++++ - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 40 +++++++++++++++++++ - .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 40 +++++++++++++++++++ - 8 files changed, 230 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -60,3 +60,28 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "poe"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "lan"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -67,3 +67,23 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@4 { -+ reg = <4>; -+ label = "lan"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -60,3 +60,23 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@4 { -+ reg = <4>; -+ label = "poe"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -108,3 +108,43 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan4"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan3"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan1"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "wan"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -54,3 +54,28 @@ - &spi_nor { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "poe"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -52,3 +52,23 @@ - &spi_nor { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -103,3 +103,43 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan4"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan3"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan1"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "wan"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -74,3 +74,43 @@ - &spi_nor { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan4"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan3"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan1"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "wan"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-5.4/033-v5.10-0001-ARM-dts-BCM5301X-Specify-PWM-in-the-DT.patch b/target/linux/bcm53xx/patches-5.4/033-v5.10-0001-ARM-dts-BCM5301X-Specify-PWM-in-the-DT.patch deleted file mode 100644 index 760418a086..0000000000 --- a/target/linux/bcm53xx/patches-5.4/033-v5.10-0001-ARM-dts-BCM5301X-Specify-PWM-in-the-DT.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0ea4b29d149586667d96767f1fc8e57ee942c1b0 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@gmail.com> -Date: Sat, 22 Aug 2020 18:19:19 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Specify PWM in the DT - -The BCM53016 in the Meraki MR32 uses the on-chip PWM -controller to drive a tri-color RGB LED. Since I plan -to use the PWM, I made a label for the pwm's pinmux -node. This way, it can be easily referenced.... And -Also included a label for the i2c since I'm going to -need it in the future too. - -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> -Acked-by: Scott Branden <scott.branden@broadcom.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -352,6 +352,14 @@ - }; - }; - -+ pwm: pwm@18002000 { -+ compatible = "brcm,iproc-pwm"; -+ reg = <0x18002000 0x28>; -+ clocks = <&osc>; -+ #pwm-cells = <3>; -+ status = "disabled"; -+ }; -+ - mdio: mdio@18003000 { - compatible = "brcm,iproc-mdio"; - reg = <0x18003000 0x8>; -@@ -419,12 +427,12 @@ - function = "spi"; - }; - -- i2c { -+ pinmux_i2c: i2c { - groups = "i2c_grp"; - function = "i2c"; - }; - -- pwm { -+ pinmux_pwm: pwm { - groups = "pwm0_grp", "pwm1_grp", - "pwm2_grp", "pwm3_grp"; - function = "pwm"; diff --git a/target/linux/bcm53xx/patches-5.4/033-v5.10-0002-ARM-dts-BCM5301X-Specify-uart2-in-the-DT.patch b/target/linux/bcm53xx/patches-5.4/033-v5.10-0002-ARM-dts-BCM5301X-Specify-uart2-in-the-DT.patch deleted file mode 100644 index 629e4bac24..0000000000 --- a/target/linux/bcm53xx/patches-5.4/033-v5.10-0002-ARM-dts-BCM5301X-Specify-uart2-in-the-DT.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 5e396bb05b89e23e98e6d75749b77502e68210a4 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@gmail.com> -Date: Sat, 22 Aug 2020 18:19:20 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Specify uart2 in the DT - -The BCM53016 in the Meraki MR32 utilizes the third "uart2" -to connect to a on-board Bluetooth-LE 4.0 BCM20732 chip. - -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> -Reviewed-by: Scott Branden <scott.branden@broadcom.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -394,6 +394,15 @@ - reg = <0x18105000 0x1000>; - }; - -+ uart2: serial@18008000 { -+ compatible = "ns16550a"; -+ reg = <0x18008000 0x20>; -+ clocks = <&iprocslow>; -+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; -+ reg-shift = <2>; -+ status = "disabled"; -+ }; -+ - i2c0: i2c@18009000 { - compatible = "brcm,iproc-i2c"; - reg = <0x18009000 0x50>; diff --git a/target/linux/bcm53xx/patches-5.4/033-v5.10-0003-ARM-dts-BCM5301X-Specify-pcie2-in-the-DT.patch b/target/linux/bcm53xx/patches-5.4/033-v5.10-0003-ARM-dts-BCM5301X-Specify-pcie2-in-the-DT.patch deleted file mode 100644 index 07b173702e..0000000000 --- a/target/linux/bcm53xx/patches-5.4/033-v5.10-0003-ARM-dts-BCM5301X-Specify-pcie2-in-the-DT.patch +++ /dev/null @@ -1,26 +0,0 @@ -From c4cd6fcae46fd14aed8665b7cf66d0954765a873 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@gmail.com> -Date: Sat, 22 Aug 2020 18:19:21 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Specify pcie2 in the DT - -The SoC supports three pcie ports. Currently, only -pcie0 and pcie1 are enabled. This patch adds the -pcie2 port as well. - -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> -Reviewed-by: Scott Branden <scott.branden@broadcom.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -254,6 +254,10 @@ - reg = <0x00013000 0x1000>; - }; - -+ pcie2: pcie@14000 { -+ reg = <0x00014000 0x1000>; -+ }; -+ - usb2: usb2@21000 { - reg = <0x00021000 0x1000>; - diff --git a/target/linux/bcm53xx/patches-5.4/033-v5.10-0004-ARM-BCM5301X-Add-DT-for-Meraki-MR32.patch b/target/linux/bcm53xx/patches-5.4/033-v5.10-0004-ARM-BCM5301X-Add-DT-for-Meraki-MR32.patch deleted file mode 100644 index e96815ba38..0000000000 --- a/target/linux/bcm53xx/patches-5.4/033-v5.10-0004-ARM-BCM5301X-Add-DT-for-Meraki-MR32.patch +++ /dev/null @@ -1,266 +0,0 @@ -From ec88a9c344d9fd8c3b11bff1f99a0b6248ae256d Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@gmail.com> -Date: Sat, 22 Aug 2020 18:19:23 +0200 -Subject: [PATCH] ARM: BCM5301X: Add DT for Meraki MR32 - -add support for the Cisco Meraki MR32. -This is a dual-band enterprise class 802.11ac access point. -The unit was donated by Chris Blake. Thank you! - -SoC: Broadcom BCM53016A1 (1 GHz, 2 cores) -RAM: 128 MiB -NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable) -ETH: 1GBit Ethernet Port - PoE -WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352) -WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352) -WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428) - -BLE: Broadcom BCM20732 (ttyS1) -LEDS: 1 x Programmable RGB Status LED (driven by a PWM) - 1 x White LED (GPIO) - 1 x Orange LED Fault Indicator (GPIO) - 2 x LAN Activity / Speed LEDs (On the RJ45 Port) -BUTTON: one Reset button -MISC: AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC) - ina219 hardware monitor (i2c) - Kensington Lock - -SERIAL: - WARNING: The serial port needs a TTL/RS-232 3V3 level converter! - The Serial setting is 115200-8-N-1. The board has a populated - right angle 1x4 0.1" pinheader. - The pinout is: VCC, RX, TX, GND. - -Odd stuff: - - uart0 clock frequency is 62.5 MHz. - - The LEDs are labeled as SYS-LED1 through SYS-LED3 - because of the silkscreen on the PCB. - - the original u-boot has been compiled with most functions - and commands disabled. The u-boot env isn't setup properly - either and as a result, the bcm47xxpart probing is not - working. Hence, the nand partitions are specified through a - "fixed-partition" binding. - - The "WICED SMART(TM)" Bluetooth LE 4.0 BCM20732 chip is - connected to uart2 of the SoC. The BCM20732 does not - provide a HCI. So the linux' bluetooth stack is useless. - The mock-up node with the compatible binding and - enable-gpios property is provided solely as documentation. - -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 197 +++++++++++++++++++++ - 2 files changed, 198 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm53016-meraki-mr32.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47094-luxul-xwr-3150-v1.dtb \ - bcm47094-netgear-r8500.dtb \ - bcm47094-phicomm-k3.dtb \ -+ bcm53016-meraki-mr32.dtb \ - bcm94708.dtb \ - bcm94709.dtb \ - bcm953012er.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -0,0 +1,197 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Meraki MR32 / Codename: Espresso -+ * -+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com> -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+#include <dt-bindings/leds/common.h> -+ -+/ { -+ compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708"; -+ model = "Meraki MR32"; -+ -+ chosen { -+ bootargs = " console=ttyS0,115200n8 earlycon"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ device_type = "memory"; -+ }; -+ -+ aliases { -+ serial1 = &uart2; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ sysled3 { -+ function = LED_FUNCTION_FAULT; -+ color = <LED_COLOR_ID_AMBER>; -+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; -+ panic-indicator; -+ }; -+ sysled2 { -+ function = LED_FUNCTION_INDICATOR; -+ color = <LED_COLOR_ID_WHITE>; -+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ pwm-leds { -+ compatible = "pwm-leds"; -+ -+ red { -+ /* SYS-LED 1 - Tricolor */ -+ function = LED_FUNCTION_INDICATOR; -+ color = <LED_COLOR_ID_RED>; -+ pwms = <&pwm 0 50000 0>; -+ max-brightness = <255>; -+ }; -+ -+ green { -+ /* SYS-LED 1 - Tricolor */ -+ function = LED_FUNCTION_POWER; -+ color = <LED_COLOR_ID_GREEN>; -+ pwms = <&pwm 1 50000 0>; -+ max-brightness = <255>; -+ }; -+ -+ blue { -+ /* SYS-LED 1 - Tricolor */ -+ function = LED_FUNCTION_INDICATOR; -+ color = <LED_COLOR_ID_BLUE>; -+ pwms = <&pwm 2 50000 0>; -+ max-brightness = <255>; -+ }; -+ }; -+ -+ i2c { -+ /* -+ * The platform provided I2C does not budge. -+ * This is a replacement until I can figure -+ * out what are the missing bits... -+ */ -+ -+ compatible = "i2c-gpio"; -+ sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; -+ scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; -+ i2c-gpio,delay-us = <10>; /* close to 100 kHz */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ current_sense: ina219@45 { -+ compatible = "ti,ina219"; -+ reg = <0x45>; -+ shunt-resistor = <60000>; /* = 60 mOhms */ -+ }; -+ -+ eeprom: eeprom@50 { -+ compatible = "atmel,24c64"; -+ reg = <0x50>; -+ pagesize = <32>; -+ read-only; -+ }; -+ }; -+}; -+ -+&uart0 { -+ clock-frequency = <62500000>; -+ /delete-property/ clocks; -+}; -+ -+&uart1 { -+ status = "disabled"; -+}; -+ -+&uart2 { -+ status = "okay"; -+ /* -+ * bluetooth-le { -+ * compatible = "brcm,bcm20732"; -+ * enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; -+ *}; -+ */ -+}; -+ -+&gmac1 { -+ status = "disabled"; -+}; -+&gmac2 { -+ status = "disabled"; -+}; -+&gmac3 { -+ status = "disabled"; -+}; -+ -+&pwm { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinmux_pwm>; -+}; -+ -+&nandcs { -+ nand-ecc-algo = "hw"; -+ -+ partitions { -+ /* -+ * The partition autodetection does not work for this device. -+ * It will only detect the "nvram" partition with an incorrect size. -+ * [ 1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0 -+ * [ 1.727962] Creating 1 MTD partitions on "brcmnand.0": -+ * [ 1.733117] 0x000000400000-0x000008000000 : "nvram" -+ */ -+ -+ compatible = "fixed-partitions"; -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ -+ partition0@0 { -+ label = "u-boot"; -+ reg = <0x0 0x100000>; -+ read-only; -+ }; -+ -+ partition1@100000 { -+ label = "bootkernel1"; -+ reg = <0x100000 0x300000>; -+ read-only; -+ }; -+ -+ partition2@400000 { -+ label = "nvram"; -+ reg = <0x400000 0x100000>; -+ read-only; -+ }; -+ -+ partition3@500000 { -+ label = "bootkernel2"; -+ reg = <0x500000 0x300000>; -+ read-only; -+ }; -+ -+ partition4@800000 { -+ label = "ubi"; -+ reg = <0x800000 0x7780000>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch deleted file mode 100644 index f0cfbf8e63..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 1ca5f2430c4f9d85b98b8d6e5d93f8d4802faf8e Mon Sep 17 00:00:00 2001 -From: Vivek Unune <npcomplete13@gmail.com> -Date: Wed, 14 Oct 2020 15:27:27 -0400 -Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7 - -Add ports 5 and 7 which are connected to gmac cores 1 & 2. -These will be disabled for now. - -Signed-off-by: Vivek Unune <npcomplete13@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - .../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++ - 1 file changed, 24 insertions(+) - ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -242,6 +242,30 @@ - label = "wan"; - }; - -+ port@5 { -+ reg = <5>; -+ ethernet = <&gmac0>; -+ label = "cpu"; -+ status = "disabled"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ port@7 { -+ reg = <7>; -+ ethernet = <&gmac1>; -+ label = "cpu"; -+ status = "disabled"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ - port@8 { - reg = <8>; - ethernet = <&gmac2>; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch deleted file mode 100644 index d6e5fca967..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 74abbfe99f43eb7466d26d9e48fbeb46b8f3d804 Mon Sep 17 00:00:00 2001 -From: Serge Semin <Sergey.Semin@baikalelectronics.ru> -Date: Tue, 20 Oct 2020 14:59:37 +0300 -Subject: [PATCH] ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes name - -In accordance with the Generic EHCI/OHCI bindings the corresponding node -name is suppose to comply with the Generic USB HCD DT schema, which -requires the USB nodes to have the name acceptable by the regexp: -"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible -nodes are correctly named. - -Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> -Acked-by: Florian Fainelli <f.fainelli@gmail.com> -Acked-by: Krzysztof Kozlowski <krzk@kernel.org> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 4 ++-- - arch/arm/boot/dts/bcm53573.dtsi | 4 ++-- - 2 files changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -267,7 +267,7 @@ - - interrupt-parent = <&gic>; - -- ehci: ehci@21000 { -+ ehci: usb@21000 { - #usb-cells = <0>; - - compatible = "generic-ehci"; -@@ -289,7 +289,7 @@ - }; - }; - -- ohci: ohci@22000 { -+ ohci: usb@22000 { - #usb-cells = <0>; - - compatible = "generic-ohci"; ---- a/arch/arm/boot/dts/bcm53573.dtsi -+++ b/arch/arm/boot/dts/bcm53573.dtsi -@@ -135,7 +135,7 @@ - #address-cells = <1>; - #size-cells = <1>; - -- ehci: ehci@4000 { -+ ehci: usb@4000 { - compatible = "generic-ehci"; - reg = <0x4000 0x1000>; - interrupt-parent = <&gic>; -@@ -155,7 +155,7 @@ - }; - }; - -- ohci: ohci@d000 { -+ ohci: usb@d000 { - #usb-cells = <0>; - - compatible = "generic-ohci"; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch deleted file mode 100644 index 2f9c8ce8c0..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0003-ARM-dts-BCM5310X-Harmonize-xHCI-DT-nodes-name.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 4b650a20bdb5f9558007dd3055a17a1644a91c3e Mon Sep 17 00:00:00 2001 -From: Serge Semin <Sergey.Semin@baikalelectronics.ru> -Date: Tue, 20 Oct 2020 14:59:46 +0300 -Subject: [PATCH] ARM: dts: BCM5310X: Harmonize xHCI DT nodes name - -In accordance with the Generic xHCI bindings the corresponding node -name is suppose to comply with the Generic USB HCD DT schema, which -requires the USB nodes to have the name acceptable by the regexp: -"^usb(@.*)?" . Make sure the "generic-xhci"-compatible nodes are -correctly named. - -Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> -Acked-by: Krzysztof Kozlowski <krzk@kernel.org> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -320,7 +320,7 @@ - - interrupt-parent = <&gic>; - -- xhci: xhci@23000 { -+ xhci: usb@23000 { - #usb-cells = <0>; - - compatible = "generic-xhci"; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch deleted file mode 100644 index c3fdd163d9..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0004-ARM-dts-BCM5301X-Linksys-EA9500-add-fixed-partitions.patch +++ /dev/null @@ -1,71 +0,0 @@ -From bd9a01e28e5d1632528e531480b42d6e2c861d88 Mon Sep 17 00:00:00 2001 -From: Vivek Unune <npcomplete13@gmail.com> -Date: Sun, 1 Nov 2020 15:08:03 -0500 -Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions - -This router has dual paritions to store trx firmware image and -dual partitions for nvram. The second one in each of these cases acts -as a backup store. - -When tested with OpenWrt, the default partition parser causes two issues: - -1. It labels both nvram partitions as nvram. In factory, second one is -labeled devinfo. -2. It parses second trx image and tries to create second 'linux' partition -and fails with - cannot create duplicate 'linux' partition - -The following patch works around both of these issues. - -Signed-off-by: Vivek Unune <npcomplete13@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - .../boot/dts/bcm47094-linksys-panamera.dts | 41 +++++++++++++++++++ - 1 file changed, 41 insertions(+) - ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -292,3 +292,44 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&nandcs { -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "boot"; -+ reg = <0x0000000 0x0080000>; -+ read-only; -+ }; -+ -+ partition@80000 { -+ label = "nvram"; -+ reg = <0x080000 0x0100000>; -+ }; -+ -+ partition@180000{ -+ label = "devinfo"; -+ reg = <0x0180000 0x080000>; -+ }; -+ -+ partition@200000 { -+ label = "firmware"; -+ reg = <0x0200000 0x01D00000>; -+ compatible = "brcm,trx"; -+ }; -+ -+ partition@1F00000 { -+ label = "failsafe"; -+ reg = <0x01F00000 0x01D00000>; -+ read-only; -+ }; -+ -+ partition@5200000 { -+ label = "system"; -+ reg = <0x05200000 0x02E00000>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch deleted file mode 100644 index ddebdc4343..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0005-ARM-dts-BCM5301X-Use-corretc-pinctrl-compatible-for-.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 2f34ae32f5e74096540cd7ce95bfd467cb74b21a Mon Sep 17 00:00:00 2001 -From: Vivek Unune <npcomplete13@gmail.com> -Date: Wed, 4 Nov 2020 15:29:51 -0500 -Subject: [PATCH] ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -BCM47094 version of pinmux uses different compatible and supports MDIO -pinmux pins. Hence, use the correct compatible string and defines the -MDIO pins group. - -Signed-off-by: Vivek Unune <npcomplete13@gmail.com> -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094.dtsi | 9 +++++++++ - arch/arm/boot/dts/bcm5301x.dtsi | 2 +- - 2 files changed, 10 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm47094.dtsi -+++ b/arch/arm/boot/dts/bcm47094.dtsi -@@ -8,6 +8,15 @@ - / { - }; - -+&pinctrl { -+ compatible = "brcm,bcm4709-pinmux"; -+ -+ pinmux_mdio: mdio { -+ groups = "mdio_grp"; -+ function = "mdio"; -+ }; -+}; -+ - &usb3_phy { - compatible = "brcm,ns-bx-usb3-phy"; - }; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -430,7 +430,7 @@ - #address-cells = <1>; - #size-cells = <1>; - -- pin-controller@1c0 { -+ pinctrl: pin-controller@1c0 { - compatible = "brcm,bcm4708-pinmux"; - reg = <0x1c0 0x24>; - reg-names = "cru_gpio_control"; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch deleted file mode 100644 index 785271546b..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0006-ARM-dts-BCM5301X-Linksys-EA9500-make-use-of-pinctrl.patch +++ /dev/null @@ -1,61 +0,0 @@ -From c862059875cffc013ee27bf9759ac288224e7a14 Mon Sep 17 00:00:00 2001 -From: Vivek Unune <npcomplete13@gmail.com> -Date: Wed, 4 Nov 2020 15:29:52 -0500 -Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl - -Now that we have a pin controller, use that instead of manuplating the -mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux - -Signed-off-by: Vivek Unune <npcomplete13@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - .../boot/dts/bcm47094-linksys-panamera.dts | 26 +++---------------- - 1 file changed, 4 insertions(+), 22 deletions(-) - ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -123,33 +123,13 @@ - }; - }; - -- mdio-bus-mux { -- #address-cells = <1>; -- #size-cells = <0>; -+ mdio-bus-mux@18003000 { - - /* BIT(9) = 1 => external mdio */ -- mdio_ext: mdio@200 { -+ mdio@200 { - reg = <0x200>; - #address-cells = <1>; - #size-cells = <0>; -- }; -- }; -- -- mdio-mii-mux { -- compatible = "mdio-mux-mmioreg"; -- mdio-parent-bus = <&mdio_ext>; -- #address-cells = <1>; -- #size-cells = <0>; -- reg = <0x1800c1c0 0x4>; -- -- /* BIT(6) = mdc, BIT(7) = mdio */ -- mux-mask = <0xc0>; -- -- mdio-mii@0 { -- /* Enable MII function */ -- reg = <0x0>; -- #address-cells = <1>; -- #size-cells = <0>; - - switch@0 { - compatible = "brcm,bcm53125"; -@@ -159,6 +139,8 @@ - reset-names = "robo_reset"; - reg = <0>; - dsa,member = <1 0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinmux_mdio>; - - ports { - #address-cells = <1>; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch deleted file mode 100644 index 3c3db540d0..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0007-ARM-dts-BCM5301X-Move-CRU-devices-to-the-CRU-node.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 776461b1795b4dc4084894cf53399044aafa1d21 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 11 Nov 2020 15:55:38 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: Move CRU devices to the CRU node -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Clocks and thermal blocks are part of the CRU ("Clock and Reset Unit" or -"Central Resource Unit"). - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 51 +++++++++++++++++---------------- - 1 file changed, 26 insertions(+), 25 deletions(-) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -430,6 +430,26 @@ - #address-cells = <1>; - #size-cells = <1>; - -+ lcpll0: lcpll0@100 { -+ #clock-cells = <1>; -+ compatible = "brcm,nsp-lcpll0"; -+ reg = <0x100 0x14>; -+ clocks = <&osc>; -+ clock-output-names = "lcpll0", "pcie_phy", -+ "sdio", "ddr_phy"; -+ }; -+ -+ genpll: genpll@140 { -+ #clock-cells = <1>; -+ compatible = "brcm,nsp-genpll"; -+ reg = <0x140 0x24>; -+ clocks = <&osc>; -+ clock-output-names = "genpll", "phy", -+ "ethernetclk", -+ "usbclk", "iprocfast", -+ "sata1", "sata2"; -+ }; -+ - pinctrl: pin-controller@1c0 { - compatible = "brcm,bcm4708-pinmux"; - reg = <0x1c0 0x24>; -@@ -456,32 +476,13 @@ - function = "uart1"; - }; - }; -- }; -- }; - -- lcpll0: lcpll0@1800c100 { -- #clock-cells = <1>; -- compatible = "brcm,nsp-lcpll0"; -- reg = <0x1800c100 0x14>; -- clocks = <&osc>; -- clock-output-names = "lcpll0", "pcie_phy", "sdio", -- "ddr_phy"; -- }; -- -- genpll: genpll@1800c140 { -- #clock-cells = <1>; -- compatible = "brcm,nsp-genpll"; -- reg = <0x1800c140 0x24>; -- clocks = <&osc>; -- clock-output-names = "genpll", "phy", "ethernetclk", -- "usbclk", "iprocfast", "sata1", -- "sata2"; -- }; -- -- thermal: thermal@1800c2c0 { -- compatible = "brcm,ns-thermal"; -- reg = <0x1800c2c0 0x10>; -- #thermal-sensor-cells = <0>; -+ thermal: thermal@2c0 { -+ compatible = "brcm,ns-thermal"; -+ reg = <0x2c0 0x10>; -+ #thermal-sensor-cells = <0>; -+ }; -+ }; - }; - - srab: srab@18007000 { diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch deleted file mode 100644 index 64415c14db..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0008-ARM-dts-BCM5301X-Disable-USB-3-PHY-on-devices-withou.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 632ddf978565378e7efb9ea77c0ba239ea66bfdc Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 13 Nov 2020 11:09:19 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB - 3 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It seems pointless to have it enabled. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 ---- - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ---- - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ---- - arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 4 ---- - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 4 ---- - arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ---- - 6 files changed, 24 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -57,10 +57,6 @@ - status = "okay"; - }; - --&usb3_phy { -- status = "okay"; --}; -- - &srab { - status = "okay"; - ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -64,10 +64,6 @@ - status = "okay"; - }; - --&usb3_phy { -- status = "okay"; --}; -- - &srab { - status = "okay"; - ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -117,7 +117,3 @@ - }; - }; - }; -- --&usb3_phy { -- status = "okay"; --}; ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -57,10 +57,6 @@ - status = "okay"; - }; - --&usb3_phy { -- status = "okay"; --}; -- - &srab { - status = "okay"; - ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -105,10 +105,6 @@ - status = "okay"; - }; - --&usb3_phy { -- status = "okay"; --}; -- - &srab { - status = "okay"; - ---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -@@ -126,7 +126,3 @@ - &usb2 { - vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - }; -- --&usb3_phy { -- status = "okay"; --}; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch deleted file mode 100644 index 5834e300f5..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0009-ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150.patch +++ /dev/null @@ -1,30 +0,0 @@ -From b2ab5e8697ef6591aeeda23be49e096705dbbda3 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 13 Nov 2020 10:50:12 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This device has a functional USB 3 port so PHY is required. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Reported-by: kernel test robot <lkp@intel.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -71,6 +71,10 @@ - vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; - }; - -+&usb3_phy { -+ status = "okay"; -+}; -+ - &spi_nor { - status = "okay"; - }; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch deleted file mode 100644 index b3a774e340..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0010-ARM-dts-BCM5301X-Update-Ethernet-switch-node-name.patch +++ /dev/null @@ -1,32 +0,0 @@ -From f527cb6f3345f7faa8e61dd9f3c437437327428c Mon Sep 17 00:00:00 2001 -From: Florian Fainelli <f.fainelli@gmail.com> -Date: Mon, 9 Nov 2020 11:41:01 -0800 -Subject: [PATCH] ARM: dts: BCM5301X: Update Ethernet switch node name - -Update the switch unit name from srab to ethernet-switch, allowing us to -fix warnings such as: - - CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml -arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: -srab@18007000: $nodename:0: 'srab@18007000' does not match -'^(ethernet-)?switch(@.*)?$' - From schema: -Documentation/devicetree/bindings/net/dsa/b53.yaml - -Reviewed-by: Vladimir Oltean <olteanv@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -485,7 +485,7 @@ - }; - }; - -- srab: srab@18007000 { -+ srab: ethernet-switch@18007000 { - compatible = "brcm,bcm5301x-srab"; - reg = <0x18007000 0x1000>; - diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch deleted file mode 100644 index 677e94f271..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0011-ARM-dts-BCM5301X-Add-a-default-compatible-for-switch.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 953efcb0c0234f8c488ebd4090378e949d6ba78b Mon Sep 17 00:00:00 2001 -From: Florian Fainelli <f.fainelli@gmail.com> -Date: Mon, 9 Nov 2020 16:42:09 -0800 -Subject: [PATCH] ARM: dts: BCM5301X: Add a default compatible for switch node -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Provide a default compatible string which is based on the 53011 SRAB -compatible by default. The 4709 and 47094 default to the 53012 SRAB -compatible. - -This allows us to have sane defaults and silences the following -warnings: - -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: -ethernet-switch@18007000: compatible: 'oneOf' conditional failed, one -must be fixed: - ['brcm,bcm5301x-srab'] is too short - 'brcm,bcm5325' was expected - 'brcm,bcm53115' was expected - 'brcm,bcm53125' was expected - 'brcm,bcm53128' was expected - 'brcm,bcm5365' was expected - 'brcm,bcm5395' was expected - 'brcm,bcm5389' was expected - 'brcm,bcm5397' was expected - 'brcm,bcm5398' was expected - 'brcm,bcm11360-srab' was expected - 'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab', -'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab', -'brcm,bcm53019-srab'] - 'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab', -'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab', -'brcm,bcm58311-srab', 'brcm,bcm58313-srab'] - 'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab', -'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab', -'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab'] - 'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch', -'brcm,bcm6328-switch', 'brcm,bcm6368-switch'] - From schema: -Documentation/devicetree/bindings/net/dsa/b53.yaml - -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4709.dtsi | 4 ++++ - arch/arm/boot/dts/bcm47094.dtsi | 4 ++++ - arch/arm/boot/dts/bcm5301x.dtsi | 2 +- - 3 files changed, 9 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm4709.dtsi -+++ b/arch/arm/boot/dts/bcm4709.dtsi -@@ -9,3 +9,7 @@ - clock-frequency = <125000000>; - status = "okay"; - }; -+ -+&srab { -+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; -+}; ---- a/arch/arm/boot/dts/bcm47094.dtsi -+++ b/arch/arm/boot/dts/bcm47094.dtsi -@@ -25,3 +25,7 @@ - clock-frequency = <125000000>; - status = "okay"; - }; -+ -+&srab { -+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; -+}; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -486,7 +486,7 @@ - }; - - srab: ethernet-switch@18007000 { -- compatible = "brcm,bcm5301x-srab"; -+ compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; - reg = <0x18007000 0x1000>; - - status = "disabled"; diff --git a/target/linux/bcm53xx/patches-5.4/034-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch b/target/linux/bcm53xx/patches-5.4/034-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch deleted file mode 100644 index 6e4f5f7bb8..0000000000 --- a/target/linux/bcm53xx/patches-5.4/034-v5.11-0012-ARM-dts-BCM5301X-Provide-defaults-ports-container-no.patch +++ /dev/null @@ -1,180 +0,0 @@ -From fd577b41421bc24e2d04cab96d387301b649eb14 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli <f.fainelli@gmail.com> -Date: Mon, 9 Nov 2020 17:20:17 -0800 -Subject: [PATCH] ARM: dts: BCM5301X: Provide defaults ports container node -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Provide an empty 'ports' container node with the correct #address-cells -and #size-cells properties. This silences the following warning: - -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: -ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed: - 'ports' is a required property - 'ethernet-ports' is a required property - From schema: -Documentation/devicetree/bindings/net/dsa/b53.yaml - -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 3 --- - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 3 --- - arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 --- - arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 3 --- - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 --- - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 3 --- - arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 3 --- - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 3 --- - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 --- - arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 3 --- - arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++ - arch/arm/boot/dts/bcm953012er.dts | 3 --- - 12 files changed, 4 insertions(+), 33 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -61,9 +61,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@0 { - reg = <0>; - label = "poe"; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -68,9 +68,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@4 { - reg = <4>; - label = "lan"; ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -122,9 +122,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@0 { - reg = <0>; - label = "lan4"; ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -61,9 +61,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@4 { - reg = <4>; - label = "poe"; ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -109,9 +109,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@0 { - reg = <0>; - label = "lan4"; ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -201,9 +201,6 @@ - dsa,member = <0 0>; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@1 { - reg = <1>; - label = "lan7"; ---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -59,9 +59,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@0 { - reg = <0>; - label = "poe"; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -57,9 +57,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@0 { - reg = <0>; - label = "lan"; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -108,9 +108,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@0 { - reg = <0>; - label = "lan4"; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -83,9 +83,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@0 { - reg = <0>; - label = "lan4"; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -492,6 +492,10 @@ - status = "disabled"; - - /* ports are defined in board DTS */ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; - }; - - rng: rng@18004000 { ---- a/arch/arm/boot/dts/bcm953012er.dts -+++ b/arch/arm/boot/dts/bcm953012er.dts -@@ -69,9 +69,6 @@ - status = "okay"; - - ports { -- #address-cells = <1>; -- #size-cells = <0>; -- - port@0 { - reg = <0>; - label = "port0"; diff --git a/target/linux/bcm53xx/patches-5.4/035-v5.13-0001-ARM-dts-BCM5301X-fix-reg-formatting-in-memory-node.patch b/target/linux/bcm53xx/patches-5.4/035-v5.13-0001-ARM-dts-BCM5301X-fix-reg-formatting-in-memory-node.patch deleted file mode 100644 index 532c1f72ab..0000000000 --- a/target/linux/bcm53xx/patches-5.4/035-v5.13-0001-ARM-dts-BCM5301X-fix-reg-formatting-in-memory-node.patch +++ /dev/null @@ -1,339 +0,0 @@ -From d0b16b9596468c29742049e26a866f559ec476bb Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 9 Mar 2021 13:55:00 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: fix "reg" formatting in /memory node -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This fixes warnings/errors like: -arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: /: memory@0:reg:0: [0, 134217728, 2281701376, 402653184] is too long - From schema: /lib/python3.6/site-packages/dtschema/schemas/reg.yaml - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 ++-- - arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 ++-- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++-- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++-- - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++-- - arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ++-- - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 ++-- - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ++-- - arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++-- - arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 ++-- - arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++-- - arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 4 ++-- - arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ++-- - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ++-- - arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++-- - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 4 ++-- - arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 ++-- - arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 ++-- - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 4 ++-- - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 ++-- - arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 4 ++-- - arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ++-- - arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 4 ++-- - 23 files changed, 46 insertions(+), 46 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -21,8 +21,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -21,8 +21,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -21,8 +21,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x18000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x18000000>; - }; - - spi { ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -22,8 +22,8 @@ - - memory { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -21,8 +21,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -21,8 +21,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -21,8 +21,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -21,8 +21,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - spi { ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -21,8 +21,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - spi { ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -21,8 +21,8 @@ - - memory { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -21,8 +21,8 @@ - - memory { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x18000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x18000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -@@ -18,8 +18,8 @@ - - memory { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - gpio-keys { ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -21,8 +21,8 @@ - - memory { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -32,8 +32,8 @@ - - memory { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -21,8 +21,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - nand: nand@18028000 { ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -18,8 +18,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - gpio-keys { ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -18,8 +18,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x18000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x18000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -18,8 +18,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x18000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x18000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -18,8 +18,8 @@ - - memory { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x18000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x18000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -18,8 +18,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x08000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -18,8 +18,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x18000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x18000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -@@ -18,8 +18,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x18000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x18000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -@@ -15,8 +15,8 @@ - - memory@0 { - device_type = "memory"; -- reg = <0x00000000 0x08000000 -- 0x88000000 0x18000000>; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x18000000>; - }; - - gpio-keys { diff --git a/target/linux/bcm53xx/patches-5.4/035-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch b/target/linux/bcm53xx/patches-5.4/035-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch deleted file mode 100644 index 136d221a97..0000000000 --- a/target/linux/bcm53xx/patches-5.4/035-v5.13-0002-ARM-dts-BCM5301X-Describe-NVMEM-NVRAM-on-Linksys-Lux.patch +++ /dev/null @@ -1,136 +0,0 @@ -From 428ac8df021dd1cbcc693eb76636873d42327e5d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 10 Mar 2021 22:04:46 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul - routers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Provide access to NVRAM which contains device environment variables. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 5 +++++ - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 5 +++++ - arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 5 +++++ - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 5 +++++ - arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 5 +++++ - arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 5 +++++ - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 5 +++++ - arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 5 +++++ - 8 files changed, 40 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -@@ -21,6 +21,11 @@ - reg = <0x00000000 0x08000000>; - }; - -+ nvram@1c080000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1c080000 0x180000>; -+ }; -+ - gpio-keys { - compatible = "gpio-keys"; - ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -21,6 +21,11 @@ - reg = <0x00000000 0x08000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ }; -+ - leds { - compatible = "gpio-leds"; - ---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -@@ -22,6 +22,11 @@ - <0x88000000 0x08000000>; - }; - -+ nvram@1c080000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1c080000 0x180000>; -+ }; -+ - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -22,6 +22,11 @@ - <0x88000000 0x08000000>; - }; - -+ nvram@1c080000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1c080000 0x100000>; -+ }; -+ - gpio-keys { - compatible = "gpio-keys"; - ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -22,6 +22,11 @@ - <0x88000000 0x18000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ }; -+ - leds { - compatible = "gpio-leds"; - ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -22,6 +22,11 @@ - <0x88000000 0x18000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ }; -+ - leds { - compatible = "gpio-leds"; - ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -22,6 +22,11 @@ - <0x88000000 0x08000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ }; -+ - leds { - compatible = "gpio-leds"; - ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -22,6 +22,11 @@ - <0x88000000 0x18000000>; - }; - -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ }; -+ - leds { - compatible = "gpio-leds"; - diff --git a/target/linux/bcm53xx/patches-5.4/035-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch b/target/linux/bcm53xx/patches-5.4/035-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch deleted file mode 100644 index d52f46f979..0000000000 --- a/target/linux/bcm53xx/patches-5.4/035-v5.13-0003-ARM-dts-BCM5301X-Fix-Linksys-EA9500-partitions.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 1d3352aeed164ef73f05cf80ca001f11d2f3312d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 29 Mar 2021 07:54:30 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Fix Linksys EA9500 partitions -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Partitions are basically fixed indeed but firmware ones don't have -hardcoded function ("firmware" vs "failsafe"). Actual function depends -on bootloader configuration. Use a proper binding for that. - -While at it fix numbers formatting to avoid: -arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: partitions: 'partition@1F00000' does not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+' - From schema: Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 16 +++++++--------- - 1 file changed, 7 insertions(+), 9 deletions(-) - ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -279,7 +279,7 @@ - - &nandcs { - partitions { -- compatible = "fixed-partitions"; -+ compatible = "linksys,ns-partitions"; - #address-cells = <1>; - #size-cells = <1>; - -@@ -300,20 +300,18 @@ - }; - - partition@200000 { -- label = "firmware"; -- reg = <0x0200000 0x01D00000>; -- compatible = "brcm,trx"; -+ reg = <0x0200000 0x01d00000>; -+ compatible = "linksys,ns-firmware", "brcm,trx"; - }; - -- partition@1F00000 { -- label = "failsafe"; -- reg = <0x01F00000 0x01D00000>; -- read-only; -+ partition@1f00000 { -+ reg = <0x01f00000 0x01d00000>; -+ compatible = "linksys,ns-firmware", "brcm,trx"; - }; - - partition@5200000 { - label = "system"; -- reg = <0x05200000 0x02E00000>; -+ reg = <0x05200000 0x02e00000>; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-5.4/035-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch b/target/linux/bcm53xx/patches-5.4/035-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch deleted file mode 100644 index 76cb296422..0000000000 --- a/target/linux/bcm53xx/patches-5.4/035-v5.13-0004-ARM-dts-BCM5301X-Set-Linksys-EA9500-power-LED.patch +++ /dev/null @@ -1,27 +0,0 @@ -From dcb56d61d5a8acca0a357cc603397bc0272ce4cb Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 29 Mar 2021 10:04:09 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Set Linksys EA9500 power LED -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Set Linux default trigger to default on, just like it's normally done -for power LEDs. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -75,6 +75,7 @@ - power { - label = "bcm53xx:white:power"; - gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; - }; - - wifi-disabled { diff --git a/target/linux/bcm53xx/patches-5.4/036-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch b/target/linux/bcm53xx/patches-5.4/036-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch deleted file mode 100644 index 48cceee743..0000000000 --- a/target/linux/bcm53xx/patches-5.4/036-v5.14-0001-ARM-dts-BCM5301X-Fix-NAND-nodes-names.patch +++ /dev/null @@ -1,77 +0,0 @@ -From b660269cba748dfd07eb5551a88ff34d5ea0b86e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 16 Apr 2021 15:37:48 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Fix NAND nodes names -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This matches nand-controller.yaml requirements. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -24,8 +24,8 @@ - reg = <0x00000000 0x08000000>; - }; - -- nand: nand@18028000 { -- nandcs@0 { -+ nand_controller: nand-controller@18028000 { -+ nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -25,8 +25,8 @@ - <0x88000000 0x08000000>; - }; - -- nand: nand@18028000 { -- nandcs@0 { -+ nand_controller: nand-controller@18028000 { -+ nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; ---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi -+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi -@@ -6,8 +6,8 @@ - */ - - / { -- nand@18028000 { -- nandcs: nandcs@0 { -+ nand-controller@18028000 { -+ nandcs: nand@0 { - compatible = "brcm,nandcs"; - reg = <0>; - #address-cells = <1>; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -503,7 +503,7 @@ - reg = <0x18004000 0x14>; - }; - -- nand: nand@18028000 { -+ nand_controller: nand-controller@18028000 { - compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; - reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; - reg-names = "nand", "iproc-idm", "iproc-ext"; ---- a/arch/arm/boot/dts/bcm953012k.dts -+++ b/arch/arm/boot/dts/bcm953012k.dts -@@ -49,8 +49,8 @@ - }; - }; - --&nand { -- nandcs@0 { -+&nand_controller { -+ nand@0 { - compatible = "brcm,nandcs"; - reg = <0>; - nand-on-flash-bbt; diff --git a/target/linux/bcm53xx/patches-5.4/036-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch b/target/linux/bcm53xx/patches-5.4/036-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch deleted file mode 100644 index d8a4f87c38..0000000000 --- a/target/linux/bcm53xx/patches-5.4/036-v5.14-0002-ARM-dts-BCM5301X-Fix-pinmux-subnodes-names.patch +++ /dev/null @@ -1,52 +0,0 @@ -From bb95d7d440fefd104c593d9cb20da6d34a474e97 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 21 Apr 2021 11:00:06 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Fix pinmux subnodes names -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This matches pinmux-node.yaml requirements. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094.dtsi | 2 +- - arch/arm/boot/dts/bcm5301x.dtsi | 6 +++--- - 2 files changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/bcm47094.dtsi -+++ b/arch/arm/boot/dts/bcm47094.dtsi -@@ -11,7 +11,7 @@ - &pinctrl { - compatible = "brcm,bcm4709-pinmux"; - -- pinmux_mdio: mdio { -+ pinmux_mdio: mdio-pins { - groups = "mdio_grp"; - function = "mdio"; - }; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -460,18 +460,18 @@ - function = "spi"; - }; - -- pinmux_i2c: i2c { -+ pinmux_i2c: i2c-pins { - groups = "i2c_grp"; - function = "i2c"; - }; - -- pinmux_pwm: pwm { -+ pinmux_pwm: pwm-pins { - groups = "pwm0_grp", "pwm1_grp", - "pwm2_grp", "pwm3_grp"; - function = "pwm"; - }; - -- pinmux_uart1: uart1 { -+ pinmux_uart1: uart1-pins { - groups = "uart1_grp"; - function = "uart1"; - }; diff --git a/target/linux/bcm53xx/patches-5.4/037-v5.15-0001-ARM-dts-BCM5301X-Fix-nodes-names.patch b/target/linux/bcm53xx/patches-5.4/037-v5.15-0001-ARM-dts-BCM5301X-Fix-nodes-names.patch deleted file mode 100644 index e779d45645..0000000000 --- a/target/linux/bcm53xx/patches-5.4/037-v5.15-0001-ARM-dts-BCM5301X-Fix-nodes-names.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 0e89c0d8e8edece7f8e4607841ca6651885d23b1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 19 Aug 2021 08:57:00 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Fix nodes names -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This fixes following errors for all BCM5301X dts files: -chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' -mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' -mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?' -dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 2 +- - arch/arm/boot/dts/bcm5301x.dtsi | 8 ++++---- - 2 files changed, 5 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -129,7 +129,7 @@ - }; - }; - -- mdio-bus-mux@18003000 { -+ mdio-mux@18003000 { - - /* BIT(9) = 1 => external mdio */ - mdio@200 { ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -19,7 +19,7 @@ - #size-cells = <1>; - interrupt-parent = <&gic>; - -- chipcommonA@18000000 { -+ chipcommon-a-bus@18000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x00001000>; - #address-cells = <1>; -@@ -44,7 +44,7 @@ - }; - }; - -- mpcore@19000000 { -+ mpcore-bus@19000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0x19000000 0x00023000>; - #address-cells = <1>; -@@ -371,7 +371,7 @@ - #address-cells = <1>; - }; - -- mdio-bus-mux@18003000 { -+ mdio-mux@18003000 { - compatible = "mdio-mux-mmioreg"; - mdio-parent-bus = <&mdio>; - #address-cells = <1>; -@@ -417,7 +417,7 @@ - status = "disabled"; - }; - -- dmu@1800c000 { -+ dmu-bus@1800c000 { - compatible = "simple-bus"; - ranges = <0 0x1800c000 0x1000>; - #address-cells = <1>; diff --git a/target/linux/bcm53xx/patches-5.4/037-v5.15-0002-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch b/target/linux/bcm53xx/patches-5.4/037-v5.15-0002-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch deleted file mode 100644 index dc20720dbd..0000000000 --- a/target/linux/bcm53xx/patches-5.4/037-v5.15-0002-ARM-dts-BCM5301X-Fix-MDIO-mux-binding.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 75a5646c26895c4cfadc8d54aa53ac5455947895 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 19 Aug 2021 08:57:01 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Fix MDIO mux binding -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This fixes following error for all BCM5301X dts files: -mdio-bus-mux@18003000: compatible: ['mdio-mux-mmioreg'] is too short - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -372,7 +372,7 @@ - }; - - mdio-mux@18003000 { -- compatible = "mdio-mux-mmioreg"; -+ compatible = "mdio-mux-mmioreg", "mdio-mux"; - mdio-parent-bus = <&mdio>; - #address-cells = <1>; - #size-cells = <0>; diff --git a/target/linux/bcm53xx/patches-5.4/037-v5.15-0003-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch b/target/linux/bcm53xx/patches-5.4/037-v5.15-0003-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch deleted file mode 100644 index fda22404a5..0000000000 --- a/target/linux/bcm53xx/patches-5.4/037-v5.15-0003-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch +++ /dev/null @@ -1,158 +0,0 @@ -From def3d0357e0539e6f6b82f079ff156def6ec2107 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 19 Aug 2021 08:57:02 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Fix memory nodes names -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Thix fixes: -arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} -arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} -arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} -arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']} -arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} -arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +- - arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +- - arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +- - arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 2 +- - arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +- - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 2 +- - arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 2 +- - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +- - arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +- - arch/arm/boot/dts/bcm94708.dts | 2 +- - arch/arm/boot/dts/bcm94709.dts | 2 +- - 11 files changed, 11 insertions(+), 11 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -20,7 +20,7 @@ - bootargs = "console=ttyS0,115200 earlycon"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -19,7 +19,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -19,7 +19,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x18000000>; ---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -@@ -16,7 +16,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -19,7 +19,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -30,7 +30,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -@@ -15,7 +15,7 @@ - bootargs = "console=ttyS0,115200 earlycon"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -16,7 +16,7 @@ - bootargs = "earlycon"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x18000000>; ---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -20,7 +20,7 @@ - bootargs = " console=ttyS0,115200n8 earlycon"; - }; - -- memory { -+ memory@0 { - reg = <0x00000000 0x08000000>; - device_type = "memory"; - }; ---- a/arch/arm/boot/dts/bcm94708.dts -+++ b/arch/arm/boot/dts/bcm94708.dts -@@ -38,7 +38,7 @@ - model = "NorthStar SVK (BCM94708)"; - compatible = "brcm,bcm94708", "brcm,bcm4708"; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; ---- a/arch/arm/boot/dts/bcm94709.dts -+++ b/arch/arm/boot/dts/bcm94709.dts -@@ -38,7 +38,7 @@ - model = "NorthStar SVK (BCM94709)"; - compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; diff --git a/target/linux/bcm53xx/patches-5.4/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch b/target/linux/bcm53xx/patches-5.4/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch deleted file mode 100644 index 01e29aaad6..0000000000 --- a/target/linux/bcm53xx/patches-5.4/080-v5.13-0001-dt-bindings-nvmem-add-Broadcom-s-NVRAM.patch +++ /dev/null @@ -1,56 +0,0 @@ -From c39edb9f9dcb6c8a0ba0ebf5df9e0ac93ab94b82 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 5 Mar 2021 19:32:35 +0100 -Subject: [PATCH] dt-bindings: nvmem: add Broadcom's NVRAM -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Broadcom's NVRAM structure contains device data and can be accessed -using I/O mapping. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Reviewed-by: Rob Herring <robh@kernel.org> -Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> ---- - .../devicetree/bindings/nvmem/brcm,nvram.yaml | 34 +++++++++++++++++++ - 1 file changed, 34 insertions(+) - create mode 100644 Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml -@@ -0,0 +1,34 @@ -+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/nvmem/brcm,nvram.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Broadcom's NVRAM -+ -+description: | -+ Broadcom's NVRAM is a structure containing device specific environment -+ variables. It is used for storing device configuration, booting parameters -+ and calibration data. -+ -+ NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9 -+ devices usiong I/O mapped memory. -+ -+maintainers: -+ - Rafał Miłecki <rafal@milecki.pl> -+ -+allOf: -+ - $ref: "nvmem.yaml#" -+ -+properties: -+ compatible: -+ const: brcm,nvram -+ -+unevaluatedProperties: false -+ -+examples: -+ - | -+ nvram@1eff0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1eff0000 0x10000>; -+ }; diff --git a/target/linux/bcm53xx/patches-5.4/080-v5.13-0002-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch b/target/linux/bcm53xx/patches-5.4/080-v5.13-0002-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch deleted file mode 100644 index 61def7a93d..0000000000 --- a/target/linux/bcm53xx/patches-5.4/080-v5.13-0002-nvmem-brcm_nvram-new-driver-exposing-Broadcom-s-NVRA.patch +++ /dev/null @@ -1,124 +0,0 @@ -From b152bbeb0282bfcf6f91d0d5befd7582c1c3fc23 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 5 Mar 2021 19:32:36 +0100 -Subject: [PATCH] nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This driver provides access to Broadcom's NVRAM. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> ---- - drivers/nvmem/Kconfig | 9 +++++ - drivers/nvmem/Makefile | 2 + - drivers/nvmem/brcm_nvram.c | 78 ++++++++++++++++++++++++++++++++++++++ - 3 files changed, 89 insertions(+) - create mode 100644 drivers/nvmem/brcm_nvram.c - ---- a/drivers/nvmem/Kconfig -+++ b/drivers/nvmem/Kconfig -@@ -230,4 +230,13 @@ config NVMEM_ZYNQMP - - If sure, say yes. If unsure, say no. - -+ -+config NVMEM_BRCM_NVRAM -+ tristate "Broadcom's NVRAM support" -+ depends on ARCH_BCM_5301X || COMPILE_TEST -+ depends on HAS_IOMEM -+ help -+ This driver provides support for Broadcom's NVRAM that can be accessed -+ using I/O mapping. -+ - endif ---- a/drivers/nvmem/Makefile -+++ b/drivers/nvmem/Makefile -@@ -50,3 +50,5 @@ obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27 - nvmem-sc27xx-efuse-y := sc27xx-efuse.o - obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o - nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o -+obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o -+nvmem_brcm_nvram-y := brcm_nvram.o ---- /dev/null -+++ b/drivers/nvmem/brcm_nvram.c -@@ -0,0 +1,78 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* -+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl> -+ */ -+ -+#include <linux/io.h> -+#include <linux/mod_devicetable.h> -+#include <linux/module.h> -+#include <linux/nvmem-provider.h> -+#include <linux/platform_device.h> -+ -+struct brcm_nvram { -+ struct device *dev; -+ void __iomem *base; -+}; -+ -+static int brcm_nvram_read(void *context, unsigned int offset, void *val, -+ size_t bytes) -+{ -+ struct brcm_nvram *priv = context; -+ u8 *dst = val; -+ -+ while (bytes--) -+ *dst++ = readb(priv->base + offset++); -+ -+ return 0; -+} -+ -+static int brcm_nvram_probe(struct platform_device *pdev) -+{ -+ struct nvmem_config config = { -+ .name = "brcm-nvram", -+ .reg_read = brcm_nvram_read, -+ }; -+ struct device *dev = &pdev->dev; -+ struct resource *res; -+ struct brcm_nvram *priv; -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ priv->dev = dev; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ priv->base = devm_ioremap_resource(dev, res); -+ if (IS_ERR(priv->base)) -+ return PTR_ERR(priv->base); -+ -+ config.dev = dev; -+ config.priv = priv; -+ config.size = resource_size(res); -+ -+ return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config)); -+} -+ -+static const struct of_device_id brcm_nvram_of_match_table[] = { -+ { .compatible = "brcm,nvram", }, -+ {}, -+}; -+ -+static struct platform_driver brcm_nvram_driver = { -+ .probe = brcm_nvram_probe, -+ .driver = { -+ .name = "brcm_nvram", -+ .of_match_table = brcm_nvram_of_match_table, -+ }, -+}; -+ -+static int __init brcm_nvram_init(void) -+{ -+ return platform_driver_register(&brcm_nvram_driver); -+} -+ -+subsys_initcall_sync(brcm_nvram_init); -+ -+MODULE_AUTHOR("Rafał Miłecki"); -+MODULE_LICENSE("GPL"); -+MODULE_DEVICE_TABLE(of, brcm_nvram_of_match_table); diff --git a/target/linux/bcm53xx/patches-5.4/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch b/target/linux/bcm53xx/patches-5.4/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch deleted file mode 100644 index fa86303637..0000000000 --- a/target/linux/bcm53xx/patches-5.4/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 13 Apr 2021 18:25:20 +0200 -Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Parsing every partition with "compatible" set to "brcm,trx" results in -parsing both: firmware partition and failsafe partition on devices that -implement failsafe booting. This affects e.g. Linksys EA9500 which has: - -partition@200000 { - reg = <0x0200000 0x01d00000>; - compatible = "linksys,ns-firmware", "brcm,trx"; -}; - -partition@1f00000 { - reg = <0x01f00000 0x01d00000>; - compatible = "linksys,ns-firmware", "brcm,trx"; -}; - -Check for MTD partition name "firmware" before parsing. Recently added -ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on -bootloader setup. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - drivers/mtd/parsers/parser_trx.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/mtd/parsers/parser_trx.c -+++ b/drivers/mtd/parsers/parser_trx.c -@@ -85,6 +85,10 @@ static int parser_trx_parse(struct mtd_i - uint8_t curr_part = 0, i = 0; - int err; - -+ /* Don't parse any failsafe / backup partitions */ -+ if (strcmp(mtd->name, "firmware")) -+ return -EINVAL; -+ - parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition), - GFP_KERNEL); - if (!parts) diff --git a/target/linux/bcm53xx/patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch deleted file mode 100644 index 5469beb53f..0000000000 --- a/target/linux/bcm53xx/patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch +++ /dev/null @@ -1,137 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Sat, 1 Oct 2016 22:54:48 +0200 -Subject: [PATCH] usb: xhci: add support for performing fake doorbell - -Broadcom's Northstar XHCI controllers seem to need a special start -procedure to work correctly. There isn't any official documentation of -this, the problem is that controller doesn't detect any connected -devices with default setup. Moreover connecting USB device to controller -that doesn't run properly can cause SoC's watchdog issues. - -A workaround that was successfully tested on multiple devices is to -perform a fake doorbell. This patch adds code for doing this and enables -it on BCM4708 family. ---- - drivers/usb/host/xhci-plat.c | 6 +++++ - drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++--- - drivers/usb/host/xhci.h | 1 + - 3 files changed, 67 insertions(+), 3 deletions(-) - ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -77,6 +77,8 @@ static int xhci_priv_resume_quirk(struct - static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) - { - struct xhci_plat_priv *priv = xhci_to_priv(xhci); -+ struct platform_device*pdev = to_platform_device(dev); -+ struct device_node *node = pdev->dev.of_node; - - /* - * As of now platform drivers don't provide MSI support so we ensure -@@ -84,6 +86,9 @@ static void xhci_plat_quirks(struct devi - * dev struct in order to setup MSI - */ - xhci->quirks |= XHCI_PLAT | priv->quirks; -+ -+ if (node && of_machine_is_compatible("brcm,bcm4708")) -+ xhci->quirks |= XHCI_FAKE_DOORBELL; - } - - /* called during probe() after chip reset completes */ ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -156,6 +156,49 @@ int xhci_start(struct xhci_hcd *xhci) - return ret; - } - -+/** -+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot -+ * -+ * Some controllers require a fake doorbell to start correctly. Without that -+ * they simply don't detect any devices. -+ */ -+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id) -+{ -+ u32 temp; -+ -+ /* Alloc a virt device for that slot */ -+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) { -+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); -+ return -ENOMEM; -+ } -+ -+ /* Ring fake doorbell for slot_id ep 0 */ -+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0); -+ usleep_range(1000, 1500); -+ -+ /* Read the status to check if HSE is set or not */ -+ temp = readl(&xhci->op_regs->status); -+ -+ /* Clear HSE if set */ -+ if (temp & STS_FATAL) { -+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp); -+ temp &= ~0x1fff; -+ temp |= STS_FATAL; -+ writel(temp, &xhci->op_regs->status); -+ usleep_range(1000, 1500); -+ readl(&xhci->op_regs->status); -+ } -+ -+ /* Free virt device */ -+ xhci_free_virt_device(xhci, slot_id); -+ -+ /* We're done if controller is already running */ -+ if (readl(&xhci->op_regs->command) & CMD_RUN) -+ return 0; -+ -+ return xhci_start(xhci); -+} -+ - /* - * Reset a halted HC. - * -@@ -608,10 +651,20 @@ static int xhci_init(struct usb_hcd *hcd - - static int xhci_run_finished(struct xhci_hcd *xhci) - { -- if (xhci_start(xhci)) { -- xhci_halt(xhci); -- return -ENODEV; -+ int err; -+ -+ err = xhci_start(xhci); -+ if (err) { -+ err = -ENODEV; -+ goto err_halt; - } -+ -+ if (xhci->quirks & XHCI_FAKE_DOORBELL) { -+ err = xhci_fake_doorbell(xhci, 1); -+ if (err) -+ goto err_halt; -+ } -+ - xhci->shared_hcd->state = HC_STATE_RUNNING; - xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; - -@@ -621,6 +674,10 @@ static int xhci_run_finished(struct xhci - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "Finished xhci_run for USB3 roothub"); - return 0; -+ -+err_halt: -+ xhci_halt(xhci); -+ return err; - } - - /* ---- a/drivers/usb/host/xhci.h -+++ b/drivers/usb/host/xhci.h -@@ -1877,6 +1877,7 @@ struct xhci_hcd { - #define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33) - #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) - #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) -+#define XHCI_FAKE_DOORBELL BIT_ULL(36) - #define XHCI_SKIP_PHY_INIT BIT_ULL(37) - #define XHCI_DISABLE_SPARSE BIT_ULL(38) - #define XHCI_NO_SOFT_RETRY BIT_ULL(40) diff --git a/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch deleted file mode 100644 index 034d5b52fc..0000000000 --- a/target/linux/bcm53xx/patches-5.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch +++ /dev/null @@ -1,101 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 24 Sep 2014 22:14:07 +0200 -Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Broadcom devices have broken CFE (bootloader) that leaves hardware in an -invalid state. It causes problems with booting Linux. On Northstar -devices kernel was randomly hanging in ~25% of tries during early init. -Hangs used to happen at random places in the start_kernel. On BCM53573 -kernel doesn't even seem to start booting. - -To workaround this problem we need to do following very early: -1) Clear 2 following bits in the SCTLR register: -#define CR_M (1 << 0) /* MMU enable */ -#define CR_C (1 << 2) /* Dcache enable */ -2) Flush the whole D-cache -3) Disable L2 cache - -Unfortunately this patch is not upstreamable as it does above things -unconditionally. We can't check if we are running on Broadcom platform -in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable -as it could break other devices support. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - ---- a/arch/arm/boot/compressed/Makefile -+++ b/arch/arm/boot/compressed/Makefile -@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y) - OBJS += ll_char_wr.o font.o - endif - -+ifeq ($(CONFIG_ARCH_BCM_5301X),y) -+OBJS += head-bcm_5301x-mpcore.o -+OBJS += cache-v7-min.o -+endif -+ - ifeq ($(CONFIG_ARCH_SA1100),y) - OBJS += head-sa1100.o - endif ---- /dev/null -+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S -@@ -0,0 +1,37 @@ -+/* -+ * -+ * Platform specific tweaks. This is merged into head.S by the linker. -+ * -+ */ -+ -+#include <linux/linkage.h> -+#include <asm/assembler.h> -+#include <asm/cp15.h> -+ -+ .section ".start", "ax" -+ -+/* -+ * This code section is spliced into the head code by the linker -+ */ -+ -+__plat_uncompress_start: -+ -+ @ Preserve r8/r7 i.e. kernel entry values -+ mov r12, r8 -+ -+ @ Clear MMU enable and Dcache enable bits -+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR -+ bic r0, #CR_C|CR_M -+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR -+ nop -+ -+ @ Call the cache invalidation routine -+ bl v7_flush_dcache_all -+ nop -+ mov r0,#0 -+ ldr r3, =0x19022000 @ L2 cache controller, control reg -+ str r0, [r3, #0x100] @ Disable L2 cache -+ nop -+ -+ @ Restore -+ mov r8, r12 ---- a/arch/arm/boot/compressed/cache-v7-min.S -+++ b/arch/arm/boot/compressed/cache-v7-min.S -@@ -12,6 +12,7 @@ - - #include <linux/linkage.h> - #include <linux/init.h> -+#include <asm/assembler.h> - - __INIT - -@@ -63,7 +64,7 @@ loop2: - ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 - THUMB( lsl r6, r9, r2 ) - THUMB( orr r11, r11, r6 ) @ factor index number into r11 -- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way -+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way - subs r9, r9, #1 @ decrement the index - bge loop2 - subs r4, r4, #1 @ decrement the way diff --git a/target/linux/bcm53xx/patches-5.4/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch b/target/linux/bcm53xx/patches-5.4/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch deleted file mode 100644 index 8cbda68886..0000000000 --- a/target/linux/bcm53xx/patches-5.4/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch +++ /dev/null @@ -1,33 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH] ARM: dts: BCM5301X: Update Northstar pinctrl binding -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -424,7 +424,7 @@ - #size-cells = <1>; - - cru@100 { -- compatible = "simple-bus"; -+ compatible = "syscon", "simple-mfd"; - reg = <0x100 0x1a4>; - ranges; - #address-cells = <1>; -@@ -450,10 +450,9 @@ - "sata1", "sata2"; - }; - -- pinctrl: pin-controller@1c0 { -+ pinctrl: pin-controller { - compatible = "brcm,bcm4708-pinmux"; -- reg = <0x1c0 0x24>; -- reg-names = "cru_gpio_control"; -+ offset = <0xc0>; - - spi-pins { - groups = "spi_grp"; diff --git a/target/linux/bcm53xx/patches-5.4/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-5.4/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch deleted file mode 100644 index b0800e50ae..0000000000 --- a/target/linux/bcm53xx/patches-5.4/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch +++ /dev/null @@ -1,64 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -106,6 +106,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4709-buffalo-wxr-1900dhp.dtb \ - bcm4709-linksys-ea9200.dtb \ - bcm4709-netgear-r7000.dtb \ -+ bcm4709-netgear-r7900.dtb \ - bcm4709-netgear-r8000.dtb \ - bcm4709-tplink-archer-c9-v1.dtb \ - bcm47094-dlink-dir-885l.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts -@@ -0,0 +1,42 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Netgear R7900 -+ * -+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4709.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708"; -+ model = "Netgear R7900"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; -+ }; -+ -+ axi@18000000 { -+ usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-5.4/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-5.4/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch deleted file mode 100644 index b3cb5de048..0000000000 --- a/target/linux/bcm53xx/patches-5.4/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch +++ /dev/null @@ -1,20 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -100,6 +100,12 @@ - gpio-keys { - compatible = "gpio-keys"; - -+ power { -+ label = "Power"; -+ linux,code = <KEY_POWER>; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ }; -+ - restart { - label = "Reset"; - linux,code = <KEY_RESTART>; diff --git a/target/linux/bcm53xx/patches-5.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch b/target/linux/bcm53xx/patches-5.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch deleted file mode 100644 index 982a82e78d..0000000000 --- a/target/linux/bcm53xx/patches-5.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch +++ /dev/null @@ -1,116 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH] ARM: dts: BCM5301X: Add serial= to the bootargs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's enough to have proper stdout-path for getting serial working but -for some reason LEDE doesn't offer "Please press Enter to activate this -console." unless ttyS0 is specified. - -This is a workaround to get serial working in LEDE. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - ---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -@@ -12,7 +12,7 @@ - model = "TP-LINK Archer C5 V2"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory@0 { ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -13,7 +13,7 @@ - model = "Luxul ABR-4500 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory@0 { ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -13,7 +13,7 @@ - model = "Luxul XBR-4500 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory@0 { ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -@@ -12,7 +12,7 @@ - model = "Luxul XAP-1440 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory@0 { ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -@@ -12,7 +12,7 @@ - model = "Luxul XAP-810 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory@0 { ---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -12,7 +12,7 @@ - model = "Luxul XAP-1610 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory@0 { ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -13,7 +13,7 @@ - model = "Luxul XWR-3150 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory@0 { ---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -@@ -13,6 +13,10 @@ - compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; - model = "Phicomm K3"; - -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -13,7 +13,7 @@ - model = "Luxul XWC-2000 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory@0 { diff --git a/target/linux/bcm53xx/patches-5.4/321-ARM-dts-BCM5301X-Describe-partition-formats.patch b/target/linux/bcm53xx/patches-5.4/321-ARM-dts-BCM5301X-Describe-partition-formats.patch deleted file mode 100644 index f2861177dd..0000000000 --- a/target/linux/bcm53xx/patches-5.4/321-ARM-dts-BCM5301X-Describe-partition-formats.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 7166207bd1d8c46d09d640d46afc685df9bb9083 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 22 Nov 2018 09:21:49 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: Describe partition formats -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's needed by OpenWrt for custom partitioning. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -35,6 +35,7 @@ - partition@0 { - label = "firmware"; - reg = <0x00000000 0x08000000>; -+ compatible = "seama"; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-5.4/331-Meraki-MR32-Status-LEDs.patch b/target/linux/bcm53xx/patches-5.4/331-Meraki-MR32-Status-LEDs.patch deleted file mode 100644 index fb78ee93c4..0000000000 --- a/target/linux/bcm53xx/patches-5.4/331-Meraki-MR32-Status-LEDs.patch +++ /dev/null @@ -1,28 +0,0 @@ -From: Christian Lamparter <chunkeey@gmail.com> -Date: Thu, 7 Jun 2018 19:29:12 +0200 -Subject: bcm53xx: add LED status label alias for Meraki MR32 - -add an led-status alias label. This is used by OpenWrt's LED -DTS lookup function to identifiy the indicator LED - -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> - ---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -27,6 +27,7 @@ - - aliases { - serial1 = &uart2; -+ led-status = &led_status; - }; - - leds { -@@ -68,7 +69,7 @@ - max-brightness = <255>; - }; - -- green { -+ led_status: green { - /* SYS-LED 1 - Tricolor */ - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; diff --git a/target/linux/bcm53xx/patches-5.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-5.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch deleted file mode 100644 index ff9d6b0005..0000000000 --- a/target/linux/bcm53xx/patches-5.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 16 Oct 2014 20:52:16 +0200 -Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/mtd/ubi/attach.c | 5 +++++ - drivers/mtd/ubi/io.c | 4 ++++ - drivers/mtd/ubi/ubi.h | 1 + - 3 files changed, 10 insertions(+) - ---- a/drivers/mtd/ubi/attach.c -+++ b/drivers/mtd/ubi/attach.c -@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi - #define AV_ADD BIT(1) - #define AV_FIND_OR_ADD (AV_FIND | AV_ADD) - -+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */ -+bool erase_all_next; -+ - /** - * find_or_add_av - internal function to find a volume, add a volume or do - * both (find and add if missing). -@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i - if (!ai) - return -ENOMEM; - -+ erase_all_next = false; -+ - #ifdef CONFIG_MTD_UBI_FASTMAP - /* On small flash devices we disable fastmap in any case. */ - if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) { ---- a/drivers/mtd/ubi/io.c -+++ b/drivers/mtd/ubi/io.c -@@ -710,6 +710,10 @@ int ubi_io_read_ec_hdr(struct ubi_device - } - - magic = be32_to_cpu(ec_hdr->magic); -+ if (magic == 0xdeadc0de) -+ erase_all_next = true; -+ if (erase_all_next) -+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF; - if (magic != UBI_EC_HDR_MAGIC) { - if (mtd_is_eccerr(read_err)) - return UBI_IO_BAD_HDR_EBADMSG; ---- a/drivers/mtd/ubi/ubi.h -+++ b/drivers/mtd/ubi/ubi.h -@@ -822,6 +822,7 @@ extern struct mutex ubi_devices_mutex; - extern struct blocking_notifier_head ubi_notifiers; - - /* attach.c */ -+extern bool erase_all_next; - struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum, - int ec); - void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb); diff --git a/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch deleted file mode 100644 index a6d0f119ec..0000000000 --- a/target/linux/bcm53xx/patches-5.4/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 13 May 2015 14:13:28 +0200 -Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/net/phy/b53/b53_common.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/net/phy/b53/b53_common.c -+++ b/drivers/net/phy/b53/b53_common.c -@@ -28,6 +28,7 @@ - #include <linux/of.h> - #include <linux/of_net.h> - #include <linux/platform_data/b53.h> -+#include <linux/of.h> - - #include "b53_regs.h" - #include "b53_priv.h" -@@ -1587,6 +1588,29 @@ static int b53_switch_init(struct b53_de - return ret; - } - -+ /* Set correct CPU port */ -+ if (of_machine_is_compatible("asus,rt-ac87u")) -+ sw_dev->cpu_port = 7; -+ else if (of_machine_is_compatible("netgear,r7900")) -+ sw_dev->cpu_port = 8; -+ else if (of_machine_is_compatible("netgear,r8000")) -+ sw_dev->cpu_port = 8; -+ else if (of_machine_is_compatible("netgear,r8500")) -+ sw_dev->cpu_port = 8; -+ -+ /* Enable extra ports */ -+ if (of_machine_is_compatible("tenda,ac9")) -+ dev->enabled_ports |= BIT(5); -+ -+ /* -+ * Workaround for devices using port 8 (connected to the 3rd iface). -+ * For some reason it doesn't work (no packets on eth2). -+ */ -+ if (of_machine_is_compatible("netgear,r7900") || -+ of_machine_is_compatible("netgear,r8000") || -+ (of_machine_is_compatible("linksys,panamera") && dev->chip_id == BCM53012_DEVICE_ID)) -+ sw_dev->cpu_port = 5; -+ - dev->enabled_ports |= BIT(sw_dev->cpu_port); - sw_dev->ports = fls(dev->enabled_ports); - diff --git a/target/linux/bcm53xx/patches-5.4/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch b/target/linux/bcm53xx/patches-5.4/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch deleted file mode 100644 index 86792d6ebf..0000000000 --- a/target/linux/bcm53xx/patches-5.4/800-0001-firmware-bcm47xx_nvram-support-init-from-IO-memory.patch +++ /dev/null @@ -1,61 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 11 Mar 2021 08:24:44 +0100 -Subject: [PATCH] firmware: bcm47xx_nvram: support init from IO memory -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - drivers/firmware/broadcom/bcm47xx_nvram.c | 17 +++++++++++++++++ - include/linux/bcm47xx_nvram.h | 6 ++++++ - 2 files changed, 23 insertions(+) - ---- a/drivers/firmware/broadcom/bcm47xx_nvram.c -+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c -@@ -110,6 +110,23 @@ found: - return 0; - } - -+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size) -+{ -+ if (nvram_len) { -+ pr_warn("nvram already initialized\n"); -+ return -EEXIST; -+ } -+ -+ if (!bcm47xx_nvram_is_valid(nvram_start)) { -+ pr_err("No valid NVRAM found\n"); -+ return -ENOENT; -+ } -+ -+ bcm47xx_nvram_copy(nvram_start, res_size); -+ -+ return 0; -+} -+ - /* - * On bcm47xx we need access to the NVRAM very early, so we can't use mtd - * subsystem to access flash. We can't even use platform device / driver to ---- a/include/linux/bcm47xx_nvram.h -+++ b/include/linux/bcm47xx_nvram.h -@@ -11,6 +11,7 @@ - #include <linux/vmalloc.h> - - #ifdef CONFIG_BCM47XX_NVRAM -+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size); - int bcm47xx_nvram_init_from_mem(u32 base, u32 lim); - int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len); - int bcm47xx_nvram_gpio_pin(const char *name); -@@ -20,6 +21,11 @@ static inline void bcm47xx_nvram_release - vfree(nvram); - }; - #else -+static inline int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, -+ size_t res_size) -+{ -+ return -ENOTSUPP; -+} - static inline int bcm47xx_nvram_init_from_mem(u32 base, u32 lim) - { - return -ENOTSUPP; diff --git a/target/linux/bcm53xx/patches-5.4/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch b/target/linux/bcm53xx/patches-5.4/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch deleted file mode 100644 index cf5952ad5f..0000000000 --- a/target/linux/bcm53xx/patches-5.4/800-0002-nvmem-brcm_nvram-provide-NVMEM-content-to-the-NVRAM-.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 11 Mar 2021 08:26:14 +0100 -Subject: [PATCH] nvmem: brcm_nvram: provide NVMEM content to the NVRAM driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - drivers/nvmem/brcm_nvram.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/nvmem/brcm_nvram.c -+++ b/drivers/nvmem/brcm_nvram.c -@@ -3,6 +3,7 @@ - * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl> - */ - -+#include <linux/bcm47xx_nvram.h> - #include <linux/io.h> - #include <linux/mod_devicetable.h> - #include <linux/module.h> -@@ -46,6 +47,8 @@ static int brcm_nvram_probe(struct platf - if (IS_ERR(priv->base)) - return PTR_ERR(priv->base); - -+ bcm47xx_nvram_init_from_iomem(priv->base, resource_size(res)); -+ - config.dev = dev; - config.priv = priv; - config.size = resource_size(res); diff --git a/target/linux/bcm53xx/patches-5.4/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-5.4/905-BCM53573-minor-hacks.patch deleted file mode 100644 index 3f92f8865b..0000000000 --- a/target/linux/bcm53xx/patches-5.4/905-BCM53573-minor-hacks.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 15 Aug 2016 10:30:41 +0200 -Subject: [PATCH] BCM53573 minor hacks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - ---- a/arch/arm/boot/dts/bcm53573.dtsi -+++ b/arch/arm/boot/dts/bcm53573.dtsi -@@ -54,6 +54,7 @@ - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; -+ clocks = <&ilp>; - }; - - clocks { ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -328,14 +328,6 @@ static int bcma_register_devices(struct - } - #endif - --#ifdef CONFIG_BCMA_SFLASH -- if (bus->drv_cc.sflash.present) { -- err = platform_device_register(&bcma_sflash_dev); -- if (err) -- bcma_err(bus, "Error registering serial flash\n"); -- } --#endif -- - #ifdef CONFIG_BCMA_NFLASH - if (bus->drv_cc.nflash.present) { - err = platform_device_register(&bcma_nflash_dev); -@@ -413,6 +405,14 @@ int bcma_bus_register(struct bcma_bus *b - bcma_register_core(bus, core); - } - -+#ifdef CONFIG_BCMA_SFLASH -+ if (bus->drv_cc.sflash.present) { -+ err = platform_device_register(&bcma_sflash_dev); -+ if (err) -+ bcma_err(bus, "Error registering serial flash\n"); -+ } -+#endif -+ - /* Try to get SPROM */ - err = bcma_sprom_get(bus); - if (err == -ENOENT) { ---- a/drivers/clocksource/arm_arch_timer.c -+++ b/drivers/clocksource/arm_arch_timer.c -@@ -14,6 +14,7 @@ - #include <linux/smp.h> - #include <linux/cpu.h> - #include <linux/cpu_pm.h> -+#include <linux/clk.h> - #include <linux/clockchips.h> - #include <linux/clocksource.h> - #include <linux/interrupt.h> -@@ -919,6 +920,16 @@ static void arch_timer_of_configure_rate - if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) - arch_timer_rate = rate; - -+ /* Get clk rate through clk driver if present */ -+ if (!arch_timer_rate) { -+ struct clk *clk = of_clk_get(np, 0); -+ -+ if (!IS_ERR(clk)) { -+ if (!clk_prepare_enable(clk)) -+ arch_timer_rate = clk_get_rate(clk); -+ } -+ } -+ - /* Check the timer frequency. */ - if (arch_timer_rate == 0) - pr_warn("frequency not available\n"); |