aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@nbd.name>2018-04-09 09:50:23 +0200
committerFelix Fietkau <nbd@nbd.name>2018-04-27 15:19:19 +0200
commit1de74df8b9bbaafd147a2380fa306140b79b60d9 (patch)
tree2608f98d6239a058cb8401c7ffd7271f93bd7658 /target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
parent50b09196282eff24e19541003dfcb248d616006e (diff)
downloadupstream-1de74df8b9bbaafd147a2380fa306140b79b60d9.tar.gz
upstream-1de74df8b9bbaafd147a2380fa306140b79b60d9.tar.bz2
upstream-1de74df8b9bbaafd147a2380fa306140b79b60d9.zip
bcm53xx: drop linux 4.4 and 4.9 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Diffstat (limited to 'target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch')
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch126
1 files changed, 0 insertions, 126 deletions
diff --git a/target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch b/target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
deleted file mode 100644
index 7debd03af2..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From d3af86018715ebb19f4111f80e545405b208f09b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 14 Jan 2017 00:58:57 +0100
-Subject: [PATCH] ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear
- R8000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Netgear R8000 is a tri-band home router. It has three BCM43602 chipsets
-two of them for 5 GHz band. Both seem the same and their firmwares
-report the same set of channels. The problem is due to hardware / board
-design there are extra limitations that should be respected.
-
-First PHY should be used for U-NII-2 and U-NII-3. Third PHY should be
-used for U-NII-1. Using them in a different way may result in wireless
-not working or in noticeably reduced performance. Basic version of this
-info was provided by Broadcom employee, then it has been verified by me
-using original vendor firmware (which has limitations hardcoded in UI).
-
-This patch uses recently introduced ieee80211-freq-limit property to
-describe these limitations at DT level.
-
-Referencing PCIe devices in DT required specifying all related bridges.
-Below you can see (a bit complex) PCI tree from R8000 that explains all
-entries that I needed to put in DT.
-
-0000:00:00.0 14e4:8012 Bridge Device
-└─ 0000:01:00.0 14e4:aa52 Network Controller
-
-0001:00:00.0 14e4:8012 Bridge Device
-└─ 0001:01:00.0 10b5:8603 Bridge Device
- ├─ 0001:02:01.0 10b5:8603 Bridge Device
- │ └─ 0001:03:00.0 14e4:aa52 Network Controller
- ├─ 0001:02:02.0 10b5:8603 Bridge Device
- │ └─ 0001:04:00.0 14e4:aa52 Network Controller
- ├─ 0001:02:03.0 000d:0000 0x000000
- ├─ 0001:02:04.0 000d:0000 0x000000
- ├─ 0001:02:05.0 000d:0000 0x000000
- ├─ 0001:02:06.0 000d:0000 0x000000
- ├─ (...)
- ├─ 0001:02:1d.0 000d:0000 0x000000
- ├─ 0001:02:1e.0 000d:0000 0x000000
- └─ 0001:02:1f.0 000d:0000 0x000000
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 48 +++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 8 +++++
- 2 files changed, 56 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -108,6 +108,54 @@
- };
- };
-
-+&pcie0 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ieee80211-freq-limit = <5735000 5835000>;
-+ };
-+ };
-+};
-+
-+&pcie1 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@1,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@1,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@1,2,2 {
-+ reg = <0x1000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@1,4,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ieee80211-freq-limit = <5170000 5730000>;
-+ };
-+ };
-+ };
-+ };
-+};
-+
- &usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -243,6 +243,14 @@
- #gpio-cells = <2>;
- };
-
-+ pcie0: pcie@12000 {
-+ reg = <0x00012000 0x1000>;
-+ };
-+
-+ pcie1: pcie@13000 {
-+ reg = <0x00013000 0x1000>;
-+ };
-+
- usb2: usb2@21000 {
- reg = <0x00021000 0x1000>;
-