bcm53xx: backport DTS changes up to the first 4.15 queued commits

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

8 files changed, 662 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch
new file mode 100644
index 0000000000..69deca161f
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch
@@ -0,0 +1,135 @@
+From 092ccf0415c720a1e9458a46fe75f77574027a55 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Tue, 18 Jul 2017 12:37:37 -0700
+Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board
+ support
+
+Adds support for the Broadcom reference board BCM947189ACDMBR which
+features the following:
+
+* 128MB of DRAM
+* External MoCA support through a Broadcom BCM6802 chip
+* 1x external Gigabit PHY through the external BCM6802
+* 1x USB 2.0 port
+* 1x PCIE slot
+* Few configurable buttons and LEDs
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile            |  3 +-
+ arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
+ 2 files changed, 99 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -93,7 +93,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm953012hr.dtb \
+ 	bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_53573) += \
+-	bcm47189-tenda-ac9.dtb
++	bcm47189-tenda-ac9.dtb \
++	bcm947189acdbmr.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+ 	bcm963138dvt.dtb
+ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
+@@ -0,0 +1,97 @@
++/*
++ * Copyright (C) 2017 Broadcom
++ * Author: Florian Fainelli <f.fainelli@gmail.com>
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm53573.dtsi"
++
++/ {
++	compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
++	model = "Broadcom BCM947189ACDBMR";
++
++	chosen {
++		bootargs = "console=ttyS0,115200 earlycon";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		wps {
++			label = "bcm53xx:blue:wps";
++			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
++		};
++
++		5ghz {
++			label = "bcm53xx:blue:5ghz";
++			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
++		};
++
++		2ghz {
++			label = "bcm53xx:blue:2ghz";
++			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
++		};
++
++		wps {
++			label = "WPS";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	spi {
++		compatible = "spi-gpio";
++		num-chipselects = <1>;
++		gpio-sck = <&chipcommon 21 0>;
++		gpio-miso = <&chipcommon 22 0>;
++		gpio-mosi = <&chipcommon 23 0>;
++		cs-gpios = <&chipcommon 24 0>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		/* External BCM6802 MoCA chip is connected */
++	};
++};
++
++&pcie0 {
++	ranges = <0x00000000 0 0 0 0 0x00100000>;
++	#address-cells = <3>;
++	#size-cells = <2>;
++
++	bridge@0,0,0 {
++		reg = <0x0000 0 0 0 0>;
++		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
++		#address-cells = <3>;
++		#size-cells = <2>;
++
++		wifi@0,1,0 {
++			reg = <0x0000 0 0 0 0>;
++			ranges = <0x00000000 0 0 0 0x00100000>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++		};
++	};
++};
++
++&usb2 {
++	vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
++};
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch
new file mode 100644
index 0000000000..75f1d1772e
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/049-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch
@@ -0,0 +1,58 @@
+From 0173b2cd6948b5b96ac4e8dbc3bcb4dd0b45c296 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 17 Aug 2017 11:05:14 +0200
+Subject: [PATCH] ARM: BCM53573: Specify ports for USB LED for Tenda AC9
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
+leds: document new trigger-sources property") to specify USB ports. Such an
+information can be used by operating system to setup LEDs behavior.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 2 ++
+ arch/arm/boot/dts/bcm53573.dtsi          | 4 ++++
+ 2 files changed, 6 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+@@ -26,6 +26,8 @@
+ 		usb {
+ 			label = "bcm53xx:blue:usb";
+ 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		wps {
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -138,10 +138,12 @@
+ 
+ 				ehci_port1: port@1 {
+ 					reg = <1>;
++					#trigger-source-cells = <0>;
+ 				};
+ 
+ 				ehci_port2: port@2 {
+ 					reg = <2>;
++					#trigger-source-cells = <0>;
+ 				};
+ 			};
+ 
+@@ -158,10 +160,12 @@
+ 
+ 				ohci_port1: port@1 {
+ 					reg = <1>;
++					#trigger-source-cells = <0>;
+ 				};
+ 
+ 				ohci_port2: port@2 {
+ 					reg = <2>;
++					#trigger-source-cells = <0>;
+ 				};
+ 			};
+ 		};
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch
new file mode 100644
index 0000000000..3148f6c32d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/049-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch
@@ -0,0 +1,30 @@
+From 2460266f21f140936e627f28f28d1a4f30887ae9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 6 Oct 2017 10:52:35 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul
+ XWR-1200
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This info can be used by operating system to setup LED behavior.
+
+Reported-by: Dan Haab <dhaab@luxul.com>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+@@ -57,7 +57,8 @@
+ 		usb {
+ 			label = "bcm53xx:green:usb";
+ 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+-			linux,default-trigger = "none";
++			trigger-sources = <&ohci_port2>, <&ehci_port2>;
++			linux,default-trigger = "usbport";
+ 		};
+ 
+ 		status {
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch
new file mode 100644
index 0000000000..fbe8f54699
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/049-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch
@@ -0,0 +1,96 @@
+From 1f4b0d5596d2e3ea8e953d578ab8444ce860d35d Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:22 -0600
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
+board design.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                    |  1 +
+ arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm4709-tplink-archer-c9-v1.dtb \
+ 	bcm47094-dlink-dir-885l.dtb \
+ 	bcm47094-linksys-panamera.dtb \
++	bcm47094-luxul-xbr-4500.dtb \
+ 	bcm47094-luxul-xwr-3100.dtb \
+ 	bcm47094-netgear-r8500.dtb \
+ 	bcm94708.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (C) 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
++	model = "Luxul XBR-4500 V1";
++
++	chosen {
++		bootargs = "earlycon";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000
++		       0x88000000 0x18000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status {
++			label = "bcm53xx:green:status";
++			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "timer";
++		};
++
++		usb3 {
++			label = "bcm53xx:green:usb3";
++			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++				<&xhci_port1>;
++			linux,default-trigger = "usbport";
++		};
++
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&usb3 {
++	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++	status = "okay";
++};
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch
new file mode 100644
index 0000000000..b5ba1dde18
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/049-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch
@@ -0,0 +1,96 @@
+From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:23 -0600
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
+board design.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                    |  1 +
+ arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm4709-tplink-archer-c9-v1.dtb \
+ 	bcm47094-dlink-dir-885l.dtb \
+ 	bcm47094-linksys-panamera.dtb \
++	bcm47094-luxul-abr-4500.dtb \
+ 	bcm47094-luxul-xbr-4500.dtb \
+ 	bcm47094-luxul-xwr-3100.dtb \
+ 	bcm47094-netgear-r8500.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (C) 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
++	model = "Luxul ABR-4500 V1";
++
++	chosen {
++		bootargs = "earlycon";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000
++		       0x88000000 0x18000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status {
++			label = "bcm53xx:green:status";
++			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "timer";
++		};
++
++		usb3 {
++			label = "bcm53xx:green:usb3";
++			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
++			trigger-sources = <&ohci_port1>, <&ehci_port1>,
++				<&xhci_port1>;
++			linux,default-trigger = "usbport";
++		};
++
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&usb3 {
++	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++	status = "okay";
++};
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch
new file mode 100644
index 0000000000..407537f3b4
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/049-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch
@@ -0,0 +1,120 @@
+From 0aa052ce1c3340850a7e5980b6d24b3ea5779591 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:59 -0600
+Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-810
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
+used for 2.4 GHz.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                   |  1 +
+ arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 87 ++++++++++++++++++++++++++++
+ 2 files changed, 88 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm953012hr.dtb \
+ 	bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_53573) += \
++	bcm47189-luxul-xap-810.dtb \
+ 	bcm47189-tenda-ac9.dtb \
+ 	bcm947189acdbmr.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -0,0 +1,87 @@
++/*
++ * Copyright 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm53573.dtsi"
++
++/ {
++	compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
++	model = "Luxul XAP-810 V1";
++
++	chosen {
++		bootargs = "earlycon";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		5ghz {
++			label = "bcm53xx:blue:5ghz";
++			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "default-off";
++		};
++
++		system {
++			label = "bcm53xx:green:system";
++			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "timer";
++		};
++	};
++
++	pcie0_leds {
++		compatible = "gpio-leds";
++
++		2ghz {
++			label = "bcm53xx:blue:2ghz";
++			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "default-off";
++		};
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&pcie0 {
++	ranges = <0x00000000 0 0 0 0 0x00100000>;
++	#address-cells = <3>;
++	#size-cells = <2>;
++
++	bridge@0,0,0 {
++		reg = <0x0000 0 0 0 0>;
++		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
++		#address-cells = <3>;
++		#size-cells = <2>;
++
++		wifi@0,1,0 {
++			reg = <0x0000 0 0 0 0>;
++			ranges = <0x00000000 0 0 0 0x00100000>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			pcie0_chipcommon: chipcommon@0 {
++				reg = <0 0x1000>;
++
++				gpio-controller;
++				#gpio-cells = <2>;
++			};
++		};
++	};
++};
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch
new file mode 100644
index 0000000000..51b3dc7903
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/049-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch
@@ -0,0 +1,83 @@
+From 7030ea600d560026b91726f2eb79c856b813afa9 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:47:00 -0600
+Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-1440
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM53573 WiSoC based outdoor access point with an extra BCM43217
+chipset used for 2.4 GHz.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                    |  1 +
+ arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 50 +++++++++++++++++++++++++++
+ 2 files changed, 51 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm953012hr.dtb \
+ 	bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_53573) += \
++	bcm47189-luxul-xap-1440.dtb \
+ 	bcm47189-luxul-xap-810.dtb \
+ 	bcm47189-tenda-ac9.dtb \
+ 	bcm947189acdbmr.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -0,0 +1,50 @@
++/*
++ * Copyright 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm53573.dtsi"
++
++/ {
++	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
++	model = "Luxul XAP-1440 V1";
++
++	chosen {
++		bootargs = "earlycon";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		wlan {
++			label = "bcm53xx:blue:wlan";
++			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "default-off";
++		};
++
++		system {
++			label = "bcm53xx:green:system";
++			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "timer";
++		};
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
diff --git a/target/linux/bcm53xx/patches-4.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch b/target/linux/bcm53xx/patches-4.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
index 171e6b3bbb..710d94f6bc 100644
--- a/target/linux/bcm53xx/patches-4.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
+++ b/target/linux/bcm53xx/patches-4.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
@@ -24,3 +24,47 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
  	};
  
  	memory {
+--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -14,7 +14,7 @@
+ 	model = "Luxul ABR-4500 V1";
+ 
+ 	chosen {
+-		bootargs = "earlycon";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {
+--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -14,7 +14,7 @@
+ 	model = "Luxul XBR-4500 V1";
+ 
+ 	chosen {
+-		bootargs = "earlycon";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -13,7 +13,7 @@
+ 	model = "Luxul XAP-1440 V1";
+ 
+ 	chosen {
+-		bootargs = "earlycon";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -13,7 +13,7 @@
+ 	model = "Luxul XAP-810 V1";
+ 
+ 	chosen {
+-		bootargs = "earlycon";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {