bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 126 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/patches-4.4/046-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch b/target/linux/bcm53xx/patches-4.4/046-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
new file mode 100644
index 0000000000..7debd03af2
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/046-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
@@ -0,0 +1,126 @@
+From d3af86018715ebb19f4111f80e545405b208f09b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sat, 14 Jan 2017 00:58:57 +0100
+Subject: [PATCH] ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear
+ R8000
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Netgear R8000 is a tri-band home router. It has three BCM43602 chipsets
+two of them for 5 GHz band. Both seem the same and their firmwares
+report the same set of channels. The problem is due to hardware / board
+design there are extra limitations that should be respected.
+
+First PHY should be used for U-NII-2 and U-NII-3. Third PHY should be
+used for U-NII-1. Using them in a different way may result in wireless
+not working or in noticeably reduced performance. Basic version of this
+info was provided by Broadcom employee, then it has been verified by me
+using original vendor firmware (which has limitations hardcoded in UI).
+
+This patch uses recently introduced ieee80211-freq-limit property to
+describe these limitations at DT level.
+
+Referencing PCIe devices in DT required specifying all related bridges.
+Below you can see (a bit complex) PCI tree from R8000 that explains all
+entries that I needed to put in DT.
+
+0000:00:00.0		14e4:8012	Bridge Device
+└─ 0000:01:00.0		14e4:aa52	Network Controller
+
+0001:00:00.0		14e4:8012	Bridge Device
+└─ 0001:01:00.0		10b5:8603	Bridge Device
+   ├─ 0001:02:01.0	10b5:8603	Bridge Device
+   │  └─ 0001:03:00.0	14e4:aa52	Network Controller
+   ├─ 0001:02:02.0	10b5:8603	Bridge Device
+   │  └─ 0001:04:00.0	14e4:aa52	Network Controller
+   ├─ 0001:02:03.0	000d:0000	0x000000
+   ├─ 0001:02:04.0	000d:0000	0x000000
+   ├─ 0001:02:05.0	000d:0000	0x000000
+   ├─ 0001:02:06.0	000d:0000	0x000000
+   ├─ (...)
+   ├─ 0001:02:1d.0	000d:0000	0x000000
+   ├─ 0001:02:1e.0	000d:0000	0x000000
+   └─ 0001:02:1f.0	000d:0000	0x000000
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 48 +++++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm5301x.dtsi             |  8 +++++
+ 2 files changed, 56 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -108,6 +108,54 @@
+ 	};
+ };
+ 
++&pcie0 {
++	#address-cells = <3>;
++	#size-cells = <2>;
++
++	bridge@0,0,0 {
++		reg = <0x0000 0 0 0 0>;
++
++		#address-cells = <3>;
++		#size-cells = <2>;
++
++		wifi@0,1,0 {
++			reg = <0x0000 0 0 0 0>;
++			ieee80211-freq-limit = <5735000 5835000>;
++		};
++	};
++};
++
++&pcie1 {
++	#address-cells = <3>;
++	#size-cells = <2>;
++
++	bridge@1,0,0 {
++		reg = <0x0000 0 0 0 0>;
++
++		#address-cells = <3>;
++		#size-cells = <2>;
++
++		bridge@1,1,0 {
++			reg = <0x0000 0 0 0 0>;
++
++			#address-cells = <3>;
++			#size-cells = <2>;
++
++			bridge@1,2,2 {
++				reg = <0x1000 0 0 0 0>;
++
++				#address-cells = <3>;
++				#size-cells = <2>;
++
++				wifi@1,4,0 {
++					reg = <0x0000 0 0 0 0>;
++					ieee80211-freq-limit = <5170000 5730000>;
++				};
++			};
++		};
++	};
++};
++
+ &usb2 {
+ 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -243,6 +243,14 @@
+ 			#gpio-cells = <2>;
+ 		};
+ 
++		pcie0: pcie@12000 {
++			reg = <0x00012000 0x1000>;
++		};
++
++		pcie1: pcie@13000 {
++			reg = <0x00013000 0x1000>;
++		};
++
+ 		usb2: usb2@21000 {
+ 			reg = <0x00021000 0x1000>;
+