diff options
| author | Dan Haab <dan.haab@legrand.com> | 2020-04-06 16:14:39 -0700 |
|---|---|---|
| committer | Rafał Miłecki <rafal@milecki.pl> | 2020-04-07 15:27:52 +0200 |
| commit | c459a6bf482f5afc4746a4a108a143e9194cd59d (patch) | |
| tree | 6915249faa714d1444cd02dbe8e04d8e8b957f4b /target/linux/bcm53xx/base-files/etc/board.d | |
| parent | 7daab6286110b95167e291409395494f18edc9dc (diff) | |
| download | upstream-c459a6bf482f5afc4746a4a108a143e9194cd59d.tar.gz upstream-c459a6bf482f5afc4746a4a108a143e9194cd59d.tar.bz2 upstream-c459a6bf482f5afc4746a4a108a143e9194cd59d.zip | |
bcm53xx: add support for Luxul FullMAC WiFi devices
This prepares support for models XAP-1610 and XWR-3150. Flashing
requires using Luxul firmware version:
1) 8.1.0 or newer for XAP-1610
2) 6.4.0 or newer for XWR-3150
and uploading firmware using "Firmware Update" web UI page.
Signed-off-by: Dan Haab <dan.haab@legrand.com>
Diffstat (limited to 'target/linux/bcm53xx/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/bcm53xx/base-files/etc/board.d/02_network | 19 |
1 files changed, 18 insertions, 1 deletions
diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network index f86f12407f..b3d614d6a2 100755 --- a/target/linux/bcm53xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network @@ -36,6 +36,15 @@ bcm53xx_setup_interfaces() ucidef_add_switch "switch0" \ "0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5@eth0" ;; + luxul,xap-1610-v1) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "5@eth0" + ucidef_set_interface_lan "eth0.1" "dhcp" + ;; + luxul,xwr-3150-v1) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan" "5@eth0" + ;; phicomm,k3) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:wan" "5@eth0" @@ -87,20 +96,28 @@ bcm53xx_setup_macs() case "$board" in asus,rt-ac87u) etXmacaddr=$(nvram get et1macaddr) + offset=1 ;; dlink,dir-885l | \ netgear,r7900 | \ netgear,r8000 | \ netgear,r8500) etXmacaddr=$(nvram get et2macaddr) + offset=1 + ;; + luxul,xwr-3100v1 | \ + luxul,xwr-3150-v1) + etXmacaddr=$(nvram get et0macaddr) + offset=5 ;; *) etXmacaddr=$(nvram get et0macaddr) + offset=1 ;; esac # If WAN MAC isn't explicitly set, calculate it using base MAC as reference. - [ -z "$wan_macaddr" -a -n "$etXmacaddr" ] && wan_macaddr=$(macaddr_add "$etXmacaddr" 1) + [ -z "$wan_macaddr" -a -n "$etXmacaddr" ] && wan_macaddr=$(macaddr_add "$etXmacaddr" $offset) [ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr "wan" "$wan_macaddr" } |