kernel: bump 4.19 to 4.19.106

Refreshed all patches.

Remove upstreamed:
- 950-0786-leds-pca963x-Fix-open-drain-initialization.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

1 files changed, 0 insertions, 61 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch b/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch
deleted file mode 100644
index e63d4c6bc1..0000000000
--- a/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 1738aaf187e0c8e97fbdd9661960b835f45e8985 Mon Sep 17 00:00:00 2001
-From: Zahari Petkov <zahari@balena.io>
-Date: Mon, 18 Nov 2019 23:02:55 +0200
-Subject: [PATCH] leds: pca963x: Fix open-drain initialization
-
-commit 697529091ac7a0a90ca349b914bb30641c13c753 upstream.
-
-Before commit bb29b9cccd95 ("leds: pca963x: Add bindings to invert
-polarity") Mode register 2 was initialized directly with either 0x01
-or 0x05 for open-drain or totem pole (push-pull) configuration.
-
-Afterwards, MODE2 initialization started using bitwise operations on
-top of the default MODE2 register value (0x05). Using bitwise OR for
-setting OUTDRV with 0x01 and 0x05 does not produce correct results.
-When open-drain is used, instead of setting OUTDRV to 0, the driver
-keeps it as 1:
-
-Open-drain: 0x05 | 0x01 -> 0x05 (0b101 - incorrect)
-Totem pole: 0x05 | 0x05 -> 0x05 (0b101 - correct but still wrong)
-
-Now OUTDRV setting uses correct bitwise operations for initialization:
-
-Open-drain: 0x05 & ~0x04 -> 0x01 (0b001 - correct)
-Totem pole: 0x05 | 0x04 -> 0x05 (0b101 - correct)
-
-Additional MODE2 register definitions are introduced now as well.
-
-Fixes: bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity")
-Signed-off-by: Zahari Petkov <zahari@balena.io>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-pca963x.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/leds/leds-pca963x.c
-+++ b/drivers/leds/leds-pca963x.c
-@@ -43,6 +43,8 @@
- #define PCA963X_LED_PWM		0x2	/* Controlled through PWM */
- #define PCA963X_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
- 
-+#define PCA963X_MODE2_OUTDRV	0x04	/* Open-drain or totem pole */
-+#define PCA963X_MODE2_INVRT	0x10	/* Normal or inverted direction */
- #define PCA963X_MODE2_DMBLNK	0x20	/* Enable blinking */
- 
- #define PCA963X_MODE1		0x00
-@@ -462,12 +464,12 @@ static int pca963x_probe(struct i2c_clie
- 						    PCA963X_MODE2);
- 		/* Configure output: open-drain or totem pole (push-pull) */
- 		if (pdata->outdrv == PCA963X_OPEN_DRAIN)
--			mode2 |= 0x01;
-+			mode2 &= ~PCA963X_MODE2_OUTDRV;
- 		else
--			mode2 |= 0x05;
-+			mode2 |= PCA963X_MODE2_OUTDRV;
- 		/* Configure direction: normal or inverted */
- 		if (pdata->dir == PCA963X_INVERTED)
--			mode2 |= 0x10;
-+			mode2 |= PCA963X_MODE2_INVRT;
- 		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
- 					  mode2);
- 	}