bcm27xx: remove obsolete kernel 5.4

With the upgrade to kernel 5.10 per default the old version is no
longer required to be in tree.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 3175 deletions

diff --git a/target/linux/bcm27xx/patches-5.4/950-0804-drivers-media-Remove-the-downstream-version-of-bcm28.patch b/target/linux/bcm27xx/patches-5.4/950-0804-drivers-media-Remove-the-downstream-version-of-bcm28.patch
deleted file mode 100644
index f4a89a99bd..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0804-drivers-media-Remove-the-downstream-version-of-bcm28.patch
+++ /dev/null
@@ -1,3175 +0,0 @@
-From c6a423459a233669b280e1a4e4836881d77c9ff0 Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.com>
-Date: Tue, 23 Jun 2020 10:05:57 +0100
-Subject: [PATCH] drivers: media: Remove the downstream version of
- bcm2835-unicam
-
-About to be replaced by the upstream version.
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
----
- drivers/media/platform/bcm2835/Kconfig        |   14 -
- drivers/media/platform/bcm2835/Makefile       |    3 -
- .../media/platform/bcm2835/bcm2835-unicam.c   | 2873 -----------------
- .../media/platform/bcm2835/vc4-regs-unicam.h  |  253 --
- 4 files changed, 3143 deletions(-)
- delete mode 100644 drivers/media/platform/bcm2835/Kconfig
- delete mode 100644 drivers/media/platform/bcm2835/Makefile
- delete mode 100644 drivers/media/platform/bcm2835/bcm2835-unicam.c
- delete mode 100644 drivers/media/platform/bcm2835/vc4-regs-unicam.h
-
---- a/drivers/media/platform/bcm2835/Kconfig
-+++ /dev/null
-@@ -1,14 +0,0 @@
--# Broadcom VideoCore4 V4L2 camera support
--
--config VIDEO_BCM2835_UNICAM
--	tristate "Broadcom BCM2835 Unicam video capture driver"
--	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER
--	depends on ARCH_BCM2835 || COMPILE_TEST
--	select VIDEOBUF2_DMA_CONTIG
--	select V4L2_FWNODE
--	help
--	  Say Y here to enable V4L2 subdevice for CSI2 receiver.
--	  This is a V4L2 subdevice that interfaces directly to the VC4 peripheral.
--
--	   To compile this driver as a module, choose M here. The module
--	   will be called bcm2835-unicam.
---- a/drivers/media/platform/bcm2835/Makefile
-+++ /dev/null
-@@ -1,3 +0,0 @@
--# Makefile for BCM2835 Unicam driver
--
--obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o
---- a/drivers/media/platform/bcm2835/bcm2835-unicam.c
-+++ /dev/null
-@@ -1,2873 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-only
--/*
-- * BCM2835 Unicam Capture Driver
-- *
-- * Copyright (C) 2017-2020 - Raspberry Pi (Trading) Ltd.
-- *
-- * Dave Stevenson <dave.stevenson@raspberrypi.com>
-- *
-- * Based on TI am437x driver by
-- *   Benoit Parrot <bparrot@ti.com>
-- *   Lad, Prabhakar <prabhakar.csengg@gmail.com>
-- *
-- * and TI CAL camera interface driver by
-- *    Benoit Parrot <bparrot@ti.com>
-- *
-- *
-- * There are two camera drivers in the kernel for BCM283x - this one
-- * and bcm2835-camera (currently in staging).
-- *
-- * This driver directly controls the Unicam peripheral - there is no
-- * involvement with the VideoCore firmware. Unicam receives CSI-2 or
-- * CCP2 data and writes it into SDRAM.
-- * The only potential processing options are to repack Bayer data into an
-- * alternate format, and applying windowing.
-- * The repacking does not shift the data, so can repack V4L2_PIX_FMT_Sxxxx10P
-- * to V4L2_PIX_FMT_Sxxxx10, or V4L2_PIX_FMT_Sxxxx12P to V4L2_PIX_FMT_Sxxxx12,
-- * but not generically up to V4L2_PIX_FMT_Sxxxx16. The driver will add both
-- * formats where the relevant formats are defined, and will automatically
-- * configure the repacking as required.
-- * Support for windowing may be added later.
-- *
-- * It should be possible to connect this driver to any sensor with a
-- * suitable output interface and V4L2 subdevice driver.
-- *
-- * bcm2835-camera uses the VideoCore firmware to control the sensor,
-- * Unicam, ISP, and all tuner control loops. Fully processed frames are
-- * delivered to the driver by the firmware. It only has sensor drivers
-- * for Omnivision OV5647, and Sony IMX219 sensors.
-- *
-- * The two drivers are mutually exclusive for the same Unicam instance.
-- * The VideoCore firmware checks the device tree configuration during boot.
-- * If it finds device tree nodes called csi0 or csi1 it will block the
-- * firmware from accessing the peripheral, and bcm2835-camera will
-- * not be able to stream data.
-- */
--
--#include <linux/clk.h>
--#include <linux/delay.h>
--#include <linux/device.h>
--#include <linux/dma-mapping.h>
--#include <linux/err.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/io.h>
--#include <linux/module.h>
--#include <linux/of_device.h>
--#include <linux/of_graph.h>
--#include <linux/pinctrl/consumer.h>
--#include <linux/platform_device.h>
--#include <linux/pm_runtime.h>
--#include <linux/slab.h>
--#include <linux/uaccess.h>
--#include <linux/videodev2.h>
--
--#include <media/v4l2-common.h>
--#include <media/v4l2-ctrls.h>
--#include <media/v4l2-dev.h>
--#include <media/v4l2-device.h>
--#include <media/v4l2-dv-timings.h>
--#include <media/v4l2-event.h>
--#include <media/v4l2-ioctl.h>
--#include <media/v4l2-fwnode.h>
--#include <media/videobuf2-dma-contig.h>
--
--#include "vc4-regs-unicam.h"
--
--#define UNICAM_MODULE_NAME	"unicam"
--#define UNICAM_VERSION		"0.1.0"
--
--static int debug;
--module_param(debug, int, 0644);
--MODULE_PARM_DESC(debug, "Debug level 0-3");
--
--#define unicam_dbg(level, dev, fmt, arg...)	\
--		v4l2_dbg(level, debug, &(dev)->v4l2_dev, fmt, ##arg)
--#define unicam_info(dev, fmt, arg...)	\
--		v4l2_info(&(dev)->v4l2_dev, fmt, ##arg)
--#define unicam_err(dev, fmt, arg...)	\
--		v4l2_err(&(dev)->v4l2_dev, fmt, ##arg)
--
--/* To protect against a dodgy sensor driver never returning an error from
-- * enum_mbus_code, set a maximum index value to be used.
-- */
--#define MAX_ENUM_MBUS_CODE	128
--
--/*
-- * Stride is a 16 bit register, but also has to be a multiple of 32.
-- */
--#define BPL_ALIGNMENT		32
--#define MAX_BYTESPERLINE	((1 << 16) - BPL_ALIGNMENT)
--/*
-- * Max width is therefore determined by the max stride divided by
-- * the number of bits per pixel. Take 32bpp as a
-- * worst case.
-- * No imposed limit on the height, so adopt a square image for want
-- * of anything better.
-- */
--#define MAX_WIDTH	(MAX_BYTESPERLINE / 4)
--#define MAX_HEIGHT	MAX_WIDTH
--/* Define a nominal minimum image size */
--#define MIN_WIDTH	16
--#define MIN_HEIGHT	16
--/* Default size of the embedded buffer */
--#define UNICAM_EMBEDDED_SIZE	8192
--
--/*
-- * Size of the dummy buffer. Can be any size really, but the DMA
-- * allocation works in units of page sizes.
-- */
--#define DUMMY_BUF_SIZE	(PAGE_SIZE)
--
--enum pad_types {
--	IMAGE_PAD,
--	METADATA_PAD,
--	MAX_NODES
--};
--
--/*
-- * struct unicam_fmt - Unicam media bus format information
-- * @pixelformat: V4L2 pixel format FCC identifier. 0 if n/a.
-- * @repacked_fourcc: V4L2 pixel format FCC identifier if the data is expanded
-- * out to 16bpp. 0 if n/a.
-- * @code: V4L2 media bus format code.
-- * @depth: Bits per pixel as delivered from the source.
-- * @csi_dt: CSI data type.
-- * @check_variants: Flag to denote that there are multiple mediabus formats
-- *		still in the list that could match this V4L2 format.
-- */
--struct unicam_fmt {
--	u32	fourcc;
--	u32	repacked_fourcc;
--	u32	code;
--	u8	depth;
--	u8	csi_dt;
--	u8	check_variants;
--};
--
--static const struct unicam_fmt formats[] = {
--	/* YUV Formats */
--	{
--		.fourcc		= V4L2_PIX_FMT_YUYV,
--		.code		= MEDIA_BUS_FMT_YUYV8_2X8,
--		.depth		= 16,
--		.csi_dt		= 0x1e,
--		.check_variants = 1,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_UYVY,
--		.code		= MEDIA_BUS_FMT_UYVY8_2X8,
--		.depth		= 16,
--		.csi_dt		= 0x1e,
--		.check_variants = 1,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_YVYU,
--		.code		= MEDIA_BUS_FMT_YVYU8_2X8,
--		.depth		= 16,
--		.csi_dt		= 0x1e,
--		.check_variants = 1,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_VYUY,
--		.code		= MEDIA_BUS_FMT_VYUY8_2X8,
--		.depth		= 16,
--		.csi_dt		= 0x1e,
--		.check_variants = 1,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_YUYV,
--		.code		= MEDIA_BUS_FMT_YUYV8_1X16,
--		.depth		= 16,
--		.csi_dt		= 0x1e,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_UYVY,
--		.code		= MEDIA_BUS_FMT_UYVY8_1X16,
--		.depth		= 16,
--		.csi_dt		= 0x1e,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_YVYU,
--		.code		= MEDIA_BUS_FMT_YVYU8_1X16,
--		.depth		= 16,
--		.csi_dt		= 0x1e,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_VYUY,
--		.code		= MEDIA_BUS_FMT_VYUY8_1X16,
--		.depth		= 16,
--		.csi_dt		= 0x1e,
--	}, {
--	/* RGB Formats */
--		.fourcc		= V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
--		.code		= MEDIA_BUS_FMT_RGB565_2X8_LE,
--		.depth		= 16,
--		.csi_dt		= 0x22,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */
--		.code		= MEDIA_BUS_FMT_RGB565_2X8_BE,
--		.depth		= 16,
--		.csi_dt		= 0x22
--	}, {
--		.fourcc		= V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */
--		.code		= MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
--		.depth		= 16,
--		.csi_dt		= 0x21,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */
--		.code		= MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
--		.depth		= 16,
--		.csi_dt		= 0x21,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_RGB24, /* rgb */
--		.code		= MEDIA_BUS_FMT_RGB888_1X24,
--		.depth		= 24,
--		.csi_dt		= 0x24,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_BGR24, /* bgr */
--		.code		= MEDIA_BUS_FMT_BGR888_1X24,
--		.depth		= 24,
--		.csi_dt		= 0x24,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_RGB32, /* argb */
--		.code		= MEDIA_BUS_FMT_ARGB8888_1X32,
--		.depth		= 32,
--		.csi_dt		= 0x0,
--	}, {
--	/* Bayer Formats */
--		.fourcc		= V4L2_PIX_FMT_SBGGR8,
--		.code		= MEDIA_BUS_FMT_SBGGR8_1X8,
--		.depth		= 8,
--		.csi_dt		= 0x2a,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SGBRG8,
--		.code		= MEDIA_BUS_FMT_SGBRG8_1X8,
--		.depth		= 8,
--		.csi_dt		= 0x2a,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SGRBG8,
--		.code		= MEDIA_BUS_FMT_SGRBG8_1X8,
--		.depth		= 8,
--		.csi_dt		= 0x2a,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SRGGB8,
--		.code		= MEDIA_BUS_FMT_SRGGB8_1X8,
--		.depth		= 8,
--		.csi_dt		= 0x2a,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SBGGR10P,
--		.repacked_fourcc = V4L2_PIX_FMT_SBGGR10,
--		.code		= MEDIA_BUS_FMT_SBGGR10_1X10,
--		.depth		= 10,
--		.csi_dt		= 0x2b,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SGBRG10P,
--		.repacked_fourcc = V4L2_PIX_FMT_SGBRG10,
--		.code		= MEDIA_BUS_FMT_SGBRG10_1X10,
--		.depth		= 10,
--		.csi_dt		= 0x2b,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SGRBG10P,
--		.repacked_fourcc = V4L2_PIX_FMT_SGRBG10,
--		.code		= MEDIA_BUS_FMT_SGRBG10_1X10,
--		.depth		= 10,
--		.csi_dt		= 0x2b,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SRGGB10P,
--		.repacked_fourcc = V4L2_PIX_FMT_SRGGB10,
--		.code		= MEDIA_BUS_FMT_SRGGB10_1X10,
--		.depth		= 10,
--		.csi_dt		= 0x2b,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SBGGR12P,
--		.repacked_fourcc = V4L2_PIX_FMT_SBGGR12,
--		.code		= MEDIA_BUS_FMT_SBGGR12_1X12,
--		.depth		= 12,
--		.csi_dt		= 0x2c,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SGBRG12P,
--		.repacked_fourcc = V4L2_PIX_FMT_SGBRG12,
--		.code		= MEDIA_BUS_FMT_SGBRG12_1X12,
--		.depth		= 12,
--		.csi_dt		= 0x2c,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SGRBG12P,
--		.repacked_fourcc = V4L2_PIX_FMT_SGRBG12,
--		.code		= MEDIA_BUS_FMT_SGRBG12_1X12,
--		.depth		= 12,
--		.csi_dt		= 0x2c,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SRGGB12P,
--		.repacked_fourcc = V4L2_PIX_FMT_SRGGB12,
--		.code		= MEDIA_BUS_FMT_SRGGB12_1X12,
--		.depth		= 12,
--		.csi_dt		= 0x2c,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SBGGR14P,
--		.code		= MEDIA_BUS_FMT_SBGGR14_1X14,
--		.depth		= 14,
--		.csi_dt		= 0x2d,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SGBRG14P,
--		.code		= MEDIA_BUS_FMT_SGBRG14_1X14,
--		.depth		= 14,
--		.csi_dt		= 0x2d,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SGRBG14P,
--		.code		= MEDIA_BUS_FMT_SGRBG14_1X14,
--		.depth		= 14,
--		.csi_dt		= 0x2d,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_SRGGB14P,
--		.code		= MEDIA_BUS_FMT_SRGGB14_1X14,
--		.depth		= 14,
--		.csi_dt		= 0x2d,
--	}, {
--	/*
--	 * 16 bit Bayer formats could be supported, but there is no CSI2
--	 * data_type defined for raw 16, and no sensors that produce it at
--	 * present.
--	 */
--
--	/* Greyscale formats */
--		.fourcc		= V4L2_PIX_FMT_GREY,
--		.code		= MEDIA_BUS_FMT_Y8_1X8,
--		.depth		= 8,
--		.csi_dt		= 0x2a,
--	}, {
--		.fourcc		= V4L2_PIX_FMT_Y10P,
--		.repacked_fourcc = V4L2_PIX_FMT_Y10,
--		.code		= MEDIA_BUS_FMT_Y10_1X10,
--		.depth		= 10,
--		.csi_dt		= 0x2b,
--	}, {
--		/* NB There is no packed V4L2 fourcc for this format. */
--		.repacked_fourcc = V4L2_PIX_FMT_Y12,
--		.code		= MEDIA_BUS_FMT_Y12_1X12,
--		.depth		= 12,
--		.csi_dt		= 0x2c,
--	},
--	/* Embedded data format */
--	{
--		.fourcc		= V4L2_META_FMT_SENSOR_DATA,
--		.code		= MEDIA_BUS_FMT_SENSOR_DATA,
--		.depth		= 8,
--	}
--};
--
--struct unicam_dmaqueue {
--	struct list_head	active;
--};
--
--struct unicam_buffer {
--	struct vb2_v4l2_buffer vb;
--	struct list_head list;
--};
--
--struct unicam_cfg {
--	/* peripheral base address */
--	void __iomem *base;
--	/* clock gating base address */
--	void __iomem *clk_gate_base;
--};
--
--#define MAX_POSSIBLE_PIX_FMTS (ARRAY_SIZE(formats))
--
--struct unicam_node {
--	int registered;
--	int open;
--	int streaming;
--	unsigned int pad_id;
--	/* Pointer pointing to current v4l2_buffer */
--	struct unicam_buffer *cur_frm;
--	/* Pointer pointing to next v4l2_buffer */
--	struct unicam_buffer *next_frm;
--	/* video capture */
--	const struct unicam_fmt *fmt;
--	/* Used to store current pixel format */
--	struct v4l2_format v_fmt;
--	/* Used to store current mbus frame format */
--	struct v4l2_mbus_framefmt m_fmt;
--	/* Buffer queue used in video-buf */
--	struct vb2_queue buffer_queue;
--	/* Queue of filled frames */
--	struct unicam_dmaqueue dma_queue;
--	/* IRQ lock for DMA queue */
--	spinlock_t dma_queue_lock;
--	/* lock used to access this structure */
--	struct mutex lock;
--	/* Identifies video device for this channel */
--	struct video_device video_dev;
--	/* Pointer to the parent handle */
--	struct unicam_device *dev;
--	struct media_pad pad;
--	struct v4l2_ctrl_handler ctrl_handler;
--	unsigned int embedded_lines;
--	/*
--	 * Dummy buffer intended to be used by unicam
--	 * if we have no other queued buffers to swap to.
--	 */
--	void *dummy_buf_cpu_addr;
--	dma_addr_t dummy_buf_dma_addr;
--};
--
--struct unicam_device {
--	/* V4l2 specific parameters */
--
--	struct v4l2_fwnode_endpoint endpoint;
--
--	struct v4l2_async_subdev asd;
--
--	/* unicam cfg */
--	struct unicam_cfg cfg;
--	/* clock handle */
--	struct clk *clock;
--	/* V4l2 device */
--	struct v4l2_device v4l2_dev;
--	struct media_device mdev;
--
--	/* parent device */
--	struct platform_device *pdev;
--	/* subdevice async Notifier */
--	struct v4l2_async_notifier notifier;
--	unsigned int sequence;
--
--	/* ptr to  sub device */
--	struct v4l2_subdev *sensor;
--	/* Pad config for the sensor */
--	struct v4l2_subdev_pad_config *sensor_config;
--
--	unsigned int virtual_channel;
--	enum v4l2_mbus_type bus_type;
--	/*
--	 * Stores bus.mipi_csi2.flags for CSI2 sensors, or
--	 * bus.mipi_csi1.strobe for CCP2.
--	 */
--	unsigned int bus_flags;
--	unsigned int max_data_lanes;
--	unsigned int active_data_lanes;
--	bool sensor_embedded_data;
--
--	struct unicam_node node[MAX_NODES];
--};
--
--/* Hardware access */
--#define clk_write(dev, val) writel((val) | 0x5a000000, (dev)->clk_gate_base)
--#define clk_read(dev) readl((dev)->clk_gate_base)
--
--#define reg_read(dev, offset) readl((dev)->base + (offset))
--#define reg_write(dev, offset, val) writel(val, (dev)->base + (offset))
--
--#define reg_read_field(dev, offset, mask) get_field(reg_read((dev), (offset), \
--						    mask))
--
--static inline int get_field(u32 value, u32 mask)
--{
--	return (value & mask) >> __ffs(mask);
--}
--
--static inline void set_field(u32 *valp, u32 field, u32 mask)
--{
--	u32 val = *valp;
--
--	val &= ~mask;
--	val |= (field << __ffs(mask)) & mask;
--	*valp = val;
--}
--
--static inline void reg_write_field(struct unicam_cfg *dev, u32 offset,
--				   u32 field, u32 mask)
--{
--	u32 val = reg_read((dev), (offset));
--
--	set_field(&val, field, mask);
--	reg_write((dev), (offset), val);
--}
--
--/* Power management functions */
--static inline int unicam_runtime_get(struct unicam_device *dev)
--{
--	return pm_runtime_get_sync(&dev->pdev->dev);
--}
--
--static inline void unicam_runtime_put(struct unicam_device *dev)
--{
--	pm_runtime_put_sync(&dev->pdev->dev);
--}
--
--/* Format setup functions */
--static const struct unicam_fmt *find_format_by_code(u32 code)
--{
--	unsigned int i;
--
--	for (i = 0; i < ARRAY_SIZE(formats); i++) {
--		if (formats[i].code == code)
--			return &formats[i];
--	}
--
--	return NULL;
--}
--
--static int check_mbus_format(struct unicam_device *dev,
--			     const struct unicam_fmt *format)
--{
--	struct v4l2_subdev_mbus_code_enum mbus_code;
--	int ret = 0;
--	int i;
--
--	for (i = 0; !ret && i < MAX_ENUM_MBUS_CODE; i++) {
--		memset(&mbus_code, 0, sizeof(mbus_code));
--		mbus_code.index = i;
--		mbus_code.pad = IMAGE_PAD;
--		mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
--
--		ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code,
--				       NULL, &mbus_code);
--
--		if (!ret && mbus_code.code == format->code)
--			return 1;
--	}
--
--	return 0;
--}
--
--static const struct unicam_fmt *find_format_by_pix(struct unicam_device *dev,
--						   u32 pixelformat)
--{
--	unsigned int i;
--
--	for (i = 0; i < ARRAY_SIZE(formats); i++) {
--		if (formats[i].fourcc == pixelformat ||
--		    formats[i].repacked_fourcc == pixelformat) {
--			if (formats[i].check_variants &&
--			    !check_mbus_format(dev, &formats[i]))
--				continue;
--			return &formats[i];
--		}
--	}
--
--	return NULL;
--}
--
--static inline unsigned int bytes_per_line(u32 width,
--					  const struct unicam_fmt *fmt,
--					  u32 v4l2_fourcc)
--{
--	if (v4l2_fourcc == fmt->repacked_fourcc)
--		/* Repacking always goes to 16bpp */
--		return ALIGN(width << 1, BPL_ALIGNMENT);
--	else
--		return ALIGN((width * fmt->depth) >> 3, BPL_ALIGNMENT);
--}
--
--static int __subdev_get_format(struct unicam_device *dev,
--			       struct v4l2_mbus_framefmt *fmt, int pad_id)
--{
--	struct v4l2_subdev_format sd_fmt = {
--		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
--		.pad = pad_id
--	};
--	int ret;
--
--	ret = v4l2_subdev_call(dev->sensor, pad, get_fmt, dev->sensor_config,
--			       &sd_fmt);
--	if (ret < 0)
--		return ret;
--
--	*fmt = sd_fmt.format;
--
--	unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__,
--		   fmt->width, fmt->height, fmt->code);
--
--	return 0;
--}
--
--static int __subdev_set_format(struct unicam_device *dev,
--			       struct v4l2_mbus_framefmt *fmt, int pad_id)
--{
--	struct v4l2_subdev_format sd_fmt = {
--		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
--		.pad = pad_id
--	};
--	int ret;
--
--	sd_fmt.format = *fmt;
--
--	ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config,
--			       &sd_fmt);
--	if (ret < 0)
--		return ret;
--
--	if (pad_id == IMAGE_PAD)
--		unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__, fmt->width,
--			   fmt->height, fmt->code);
--	else
--		unicam_dbg(1, dev, "%s Embedded data code:%04x\n", __func__,
--			   sd_fmt.format.code);
--
--	return 0;
--}
--
--static int unicam_calc_format_size_bpl(struct unicam_device *dev,
--				       const struct unicam_fmt *fmt,
--				       struct v4l2_format *f)
--{
--	unsigned int min_bytesperline;
--
--	v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, MAX_WIDTH, 2,
--			      &f->fmt.pix.height, MIN_HEIGHT, MAX_HEIGHT, 0,
--			      0);
--
--	min_bytesperline = bytes_per_line(f->fmt.pix.width, fmt,
--					  f->fmt.pix.pixelformat);
--
--	if (f->fmt.pix.bytesperline > min_bytesperline &&
--	    f->fmt.pix.bytesperline <= MAX_BYTESPERLINE)
--		f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline,
--						BPL_ALIGNMENT);
--	else
--		f->fmt.pix.bytesperline = min_bytesperline;
--
--	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
--
--	unicam_dbg(3, dev, "%s: fourcc: %08X size: %dx%d bpl:%d img_size:%d\n",
--		   __func__,
--		   f->fmt.pix.pixelformat,
--		   f->fmt.pix.width, f->fmt.pix.height,
--		   f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
--
--	return 0;
--}
--
--static int unicam_reset_format(struct unicam_node *node)
--{
--	struct unicam_device *dev = node->dev;
--	struct v4l2_mbus_framefmt mbus_fmt;
--	int ret;
--
--	if (dev->sensor_embedded_data || node->pad_id != METADATA_PAD) {
--		ret = __subdev_get_format(dev, &mbus_fmt, node->pad_id);
--		if (ret) {
--			unicam_err(dev, "Failed to get_format - ret %d\n", ret);
--			return ret;
--		}
--
--		if (mbus_fmt.code != node->fmt->code) {
--			unicam_err(dev, "code mismatch - fmt->code %08x, mbus_fmt.code %08x\n",
--				   node->fmt->code, mbus_fmt.code);
--			return ret;
--		}
--	}
--
--	if (node->pad_id == IMAGE_PAD) {
--		v4l2_fill_pix_format(&node->v_fmt.fmt.pix, &mbus_fmt);
--		node->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
--		unicam_calc_format_size_bpl(dev, node->fmt, &node->v_fmt);
--	} else {
--		node->v_fmt.type = V4L2_BUF_TYPE_META_CAPTURE;
--		node->v_fmt.fmt.meta.dataformat = V4L2_META_FMT_SENSOR_DATA;
--		if (dev->sensor_embedded_data) {
--			node->v_fmt.fmt.meta.buffersize =
--					mbus_fmt.width * mbus_fmt.height;
--			node->embedded_lines = mbus_fmt.height;
--		} else {
--			node->v_fmt.fmt.meta.buffersize = UNICAM_EMBEDDED_SIZE;
--			node->embedded_lines = 1;
--		}
--	}
--
--	node->m_fmt = mbus_fmt;
--	return 0;
--}
--
--static void unicam_wr_dma_addr(struct unicam_cfg *cfg, dma_addr_t dmaaddr,
--			       unsigned int buffer_size, int pad_id)
--{
--	dma_addr_t endaddr = dmaaddr + buffer_size;
--
--	/*
--	 * dmaaddr and endaddr should be a 32-bit address with the top two bits
--	 * set to 0x3 to signify uncached access through the Videocore memory
--	 * controller.
--	 */
--	BUG_ON((dmaaddr >> 30) != 0x3 && (endaddr >> 30) != 0x3);
--
--	if (pad_id == IMAGE_PAD) {
--		reg_write(cfg, UNICAM_IBSA0, dmaaddr);
--		reg_write(cfg, UNICAM_IBEA0, endaddr);
--	} else {
--		reg_write(cfg, UNICAM_DBSA0, dmaaddr);
--		reg_write(cfg, UNICAM_DBEA0, endaddr);
--	}
--}
--
--static inline unsigned int unicam_get_lines_done(struct unicam_device *dev)
--{
--	dma_addr_t start_addr, cur_addr;
--	unsigned int stride = dev->node[IMAGE_PAD].v_fmt.fmt.pix.bytesperline;
--	struct unicam_buffer *frm = dev->node[IMAGE_PAD].cur_frm;
--
--	if (!frm)
--		return 0;
--
--	start_addr = vb2_dma_contig_plane_dma_addr(&frm->vb.vb2_buf, 0);
--	cur_addr = reg_read(&dev->cfg, UNICAM_IBWP);
--	return (unsigned int)(cur_addr - start_addr) / stride;
--}
--
--static inline void unicam_schedule_next_buffer(struct unicam_node *node)
--{
--	struct unicam_device *dev = node->dev;
--	struct unicam_dmaqueue *dma_q = &node->dma_queue;
--	struct unicam_buffer *buf;
--	unsigned int size;
--	dma_addr_t addr;
--
--	buf = list_entry(dma_q->active.next, struct unicam_buffer, list);
--	node->next_frm = buf;
--	list_del(&buf->list);
--
--	addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
--	size = (node->pad_id == IMAGE_PAD) ?
--			dev->node[IMAGE_PAD].v_fmt.fmt.pix.sizeimage :
--			dev->node[METADATA_PAD].v_fmt.fmt.meta.buffersize;
--
--	unicam_wr_dma_addr(&dev->cfg, addr, size, node->pad_id);
--}
--
--static inline void unicam_schedule_dummy_buffer(struct unicam_node *node)
--{
--	struct unicam_device *dev = node->dev;
--	dma_addr_t addr = node->dummy_buf_dma_addr;
--
--	unicam_dbg(3, dev, "Scheduling dummy buffer for node %d\n",
--		   node->pad_id);
--
--	unicam_wr_dma_addr(&dev->cfg, addr, DUMMY_BUF_SIZE, node->pad_id);
--	node->next_frm = NULL;
--}
--
--static inline void unicam_process_buffer_complete(struct unicam_node *node,
--						  unsigned int sequence)
--{
--	node->cur_frm->vb.field = node->m_fmt.field;
--	node->cur_frm->vb.sequence = sequence;
--
--	vb2_buffer_done(&node->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
--}
--
--static int unicam_num_nodes_streaming(struct unicam_device *dev)
--{
--	return dev->node[IMAGE_PAD].streaming +
--	       dev->node[METADATA_PAD].streaming;
--}
--
--static int unicam_all_nodes_streaming(struct unicam_device *dev)
--{
--	int ret;
--
--	ret = dev->node[IMAGE_PAD].open && dev->node[IMAGE_PAD].streaming;
--	ret &= !dev->node[METADATA_PAD].open ||
--	       dev->node[METADATA_PAD].streaming;
--	return ret;
--}
--
--static void unicam_queue_event_sof(struct unicam_device *unicam)
--{
--	struct v4l2_event event = {
--		.type = V4L2_EVENT_FRAME_SYNC,
--		.u.frame_sync.frame_sequence = unicam->sequence,
--	};
--
--	v4l2_event_queue(&unicam->node[IMAGE_PAD].video_dev, &event);
--}
--
--/*
-- * unicam_isr : ISR handler for unicam capture
-- * @irq: irq number
-- * @dev_id: dev_id ptr
-- *
-- * It changes status of the captured buffer, takes next buffer from the queue
-- * and sets its address in unicam registers
-- */
--static irqreturn_t unicam_isr(int irq, void *dev)
--{
--	struct unicam_device *unicam = (struct unicam_device *)dev;
--	struct unicam_cfg *cfg = &unicam->cfg;
--	unsigned int lines_done = unicam_get_lines_done(dev);
--	unsigned int sequence = unicam->sequence;
--	int num_nodes_streaming = unicam_num_nodes_streaming(dev);
--	int ista, sta;
--	u64 ts;
--	int i;
--
--	sta = reg_read(cfg, UNICAM_STA);
--	/* Write value back to clear the interrupts */
--	reg_write(cfg, UNICAM_STA, sta);
--
--	ista = reg_read(cfg, UNICAM_ISTA);
--	/* Write value back to clear the interrupts */
--	reg_write(cfg, UNICAM_ISTA, ista);
--
--	unicam_dbg(3, unicam, "ISR: ISTA: 0x%X, STA: 0x%X, sequence %d, lines done %d",
--		   ista, sta, sequence, lines_done);
--
--	if (!(sta && (UNICAM_IS | UNICAM_PI0)))
--		return IRQ_HANDLED;
--
--	/*
--	 * We must run the frame end handler first. If we have a valid next_frm
--	 * and we get a simultaneout FE + FS interrupt, running the FS handler
--	 * first would null out the next_frm ptr and we would have lost the
--	 * buffer forever.
--	 */
--	if (ista & UNICAM_FEI || sta & UNICAM_PI0) {
--		/*
--		 * Ensure we have swapped buffers already as we can't
--		 * stop the peripheral. If no buffer is available, use a
--		 * dummy buffer to dump out frames until we get a new buffer
--		 * to use.
--		 */
--		for (i = 0; i < num_nodes_streaming; i++) {
--			if (unicam->node[i].cur_frm)
--				unicam_process_buffer_complete(&unicam->node[i],
--							       sequence);
--			unicam->node[i].cur_frm = unicam->node[i].next_frm;
--		}
--		unicam->sequence++;
--	}
--
--	if (ista & UNICAM_FSI) {
--		/*
--		 * Timestamp is to be when the first data byte was captured,
--		 * aka frame start.
--		 */
--		ts = ktime_get_ns();
--		for (i = 0; i < num_nodes_streaming; i++) {
--			if (unicam->node[i].cur_frm)
--				unicam->node[i].cur_frm->vb.vb2_buf.timestamp =
--								ts;
--			/*
--			 * Set the next frame output to go to a dummy frame
--			 * if we have not managed to obtain another frame
--			 * from the queue.
--			 */
--			unicam_schedule_dummy_buffer(&unicam->node[i]);
--		}
--
--		unicam_queue_event_sof(unicam);
--	}
--	/*
--	 * Cannot swap buffer at frame end, there may be a race condition
--	 * where the HW does not actually swap it if the new frame has
--	 * already started.
--	 */
--	if (ista & (UNICAM_FSI | UNICAM_LCI) && !(ista & UNICAM_FEI)) {
--		for (i = 0; i < num_nodes_streaming; i++) {
--			spin_lock(&unicam->node[i].dma_queue_lock);
--			if (!list_empty(&unicam->node[i].dma_queue.active) &&
--			    !unicam->node[i].next_frm)
--				unicam_schedule_next_buffer(&unicam->node[i]);
--			spin_unlock(&unicam->node[i].dma_queue_lock);
--		}
--	}
--
--	if (reg_read(&unicam->cfg, UNICAM_ICTL) & UNICAM_FCM) {
--		/* Switch out of trigger mode if selected */
--		reg_write_field(&unicam->cfg, UNICAM_ICTL, 1, UNICAM_TFC);
--		reg_write_field(&unicam->cfg, UNICAM_ICTL, 0, UNICAM_FCM);
--	}
--	return IRQ_HANDLED;
--}
--
--static int unicam_querycap(struct file *file, void *priv,
--			   struct v4l2_capability *cap)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	strlcpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver));
--	strlcpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card));
--
--	snprintf(cap->bus_info, sizeof(cap->bus_info),
--		 "platform:%s", dev->v4l2_dev.name);
--
--	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
--			    V4L2_CAP_READWRITE | V4L2_CAP_DEVICE_CAPS |
--			    V4L2_CAP_META_CAPTURE;
--
--	if (node->pad_id == IMAGE_PAD)
--		cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
--	else
--		cap->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING;
--
--	return 0;
--}
--
--static int unicam_enum_fmt_vid_cap(struct file *file, void  *priv,
--				   struct v4l2_fmtdesc *f)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct v4l2_subdev_mbus_code_enum mbus_code;
--	const struct unicam_fmt *fmt = NULL;
--	int index = 0;
--	int ret = 0;
--	int i;
--
--	if (node->pad_id == METADATA_PAD)
--		return -EINVAL;
--
--	for (i = 0; !ret && i < MAX_ENUM_MBUS_CODE; i++) {
--		memset(&mbus_code, 0, sizeof(mbus_code));
--		mbus_code.index = i;
--		mbus_code.pad = IMAGE_PAD;
--		mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
--
--		ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code,
--				       NULL, &mbus_code);
--		if (ret < 0) {
--			unicam_dbg(2, dev,
--				   "subdev->enum_mbus_code idx %d returned %d - index invalid\n",
--				   i, ret);
--			return -EINVAL;
--		}
--
--		fmt = find_format_by_code(mbus_code.code);
--		if (fmt) {
--			if (fmt->fourcc) {
--				if (index == f->index) {
--					f->pixelformat = fmt->fourcc;
--					break;
--				}
--				index++;
--			}
--			if (fmt->repacked_fourcc) {
--				if (index == f->index) {
--					f->pixelformat = fmt->repacked_fourcc;
--					break;
--				}
--				index++;
--			}
--		}
--	}
--
--	return 0;
--}
--
--static int unicam_g_fmt_vid_cap(struct file *file, void *priv,
--				struct v4l2_format *f)
--{
--	struct v4l2_mbus_framefmt mbus_fmt = {0};
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	const struct unicam_fmt *fmt = NULL;
--	int ret;
--
--	if (node->pad_id != IMAGE_PAD)
--		return -EINVAL;
--
--	/*
--	 * If a flip has occurred in the sensor, the fmt code might have
--	 * changed. So we will need to re-fetch the format from the subdevice.
--	 */
--	ret = __subdev_get_format(dev, &mbus_fmt, node->pad_id);
--	if (ret)
--		return -EINVAL;
--
--	/* Find the V4L2 format from mbus code. We must match a known format. */
--	fmt = find_format_by_code(mbus_fmt.code);
--	if (!fmt)
--		return -EINVAL;
--
--	if (node->fmt != fmt) {
--		/*
--		 * The sensor format has changed so the pixelformat needs to
--		 * be updated. Try and retain the packed/unpacked choice if
--		 * at all possible.
--		 */
--		if (node->fmt->repacked_fourcc ==
--						node->v_fmt.fmt.pix.pixelformat)
--			/* Using the repacked format */
--			node->v_fmt.fmt.pix.pixelformat = fmt->repacked_fourcc;
--		else
--			/* Using the native format */
--			node->v_fmt.fmt.pix.pixelformat = fmt->fourcc;
--
--		node->fmt = fmt;
--	}
--
--	*f = node->v_fmt;
--
--	return 0;
--}
--
--static
--const struct unicam_fmt *get_first_supported_format(struct unicam_device *dev)
--{
--	struct v4l2_subdev_mbus_code_enum mbus_code;
--	const struct unicam_fmt *fmt = NULL;
--	int ret = 0;
--	int j;
--
--	for (j = 0; ret != -EINVAL && ret != -ENOIOCTLCMD; ++j) {
--		memset(&mbus_code, 0, sizeof(mbus_code));
--		mbus_code.index = j;
--		mbus_code.pad = IMAGE_PAD;
--		mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
--
--		ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code, NULL,
--				       &mbus_code);
--		if (ret < 0) {
--			unicam_dbg(2, dev,
--				   "subdev->enum_mbus_code idx %d returned %d - continue\n",
--				   j, ret);
--			continue;
--		}
--
--		unicam_dbg(2, dev, "subdev %s: code: 0x%08x idx: %d\n",
--			   dev->sensor->name, mbus_code.code, j);
--
--		fmt = find_format_by_code(mbus_code.code);
--		unicam_dbg(2, dev, "fmt 0x%08x returned as %p, V4L2 FOURCC 0x%08x, csi_dt 0x%02x\n",
--			   mbus_code.code, fmt, fmt ? fmt->fourcc : 0,
--			   fmt ? fmt->csi_dt : 0);
--		if (fmt)
--			return fmt;
--	}
--
--	return NULL;
--}
--
--static int unicam_try_fmt_vid_cap(struct file *file, void *priv,
--				  struct v4l2_format *f)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct v4l2_subdev_format sd_fmt = {
--		.which = V4L2_SUBDEV_FORMAT_TRY,
--		.pad = IMAGE_PAD
--	};
--	struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
--	const struct unicam_fmt *fmt;
--	int ret;
--
--	if (node->pad_id == METADATA_PAD)
--		return -EINVAL;
--
--	fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat);
--	if (!fmt) {
--		/* Pixel format not supported by unicam. Choose the first
--		 * supported format, and let the sensor choose something else.
--		 */
--		unicam_dbg(3, dev, "Fourcc format (0x%08x) not found. Use first format.\n",
--			   f->fmt.pix.pixelformat);
--
--		fmt = &formats[0];
--		f->fmt.pix.pixelformat = fmt->fourcc;
--	}
--
--	v4l2_fill_mbus_format(mbus_fmt, &f->fmt.pix, fmt->code);
--	/*
--	 * No support for receiving interlaced video, so never
--	 * request it from the sensor subdev.
--	 */
--	mbus_fmt->field = V4L2_FIELD_NONE;
--
--	ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config,
--			       &sd_fmt);
--	if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
--		return ret;
--
--	if (mbus_fmt->field != V4L2_FIELD_NONE)
--		unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n");
--
--	v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format);
--	if (mbus_fmt->code != fmt->code) {
--		/* Sensor has returned an alternate format */
--		fmt = find_format_by_code(mbus_fmt->code);
--		if (!fmt) {
--			/* The alternate format is one unicam can't support.
--			 * Find the first format that is supported by both, and
--			 * then set that.
--			 */
--			fmt = get_first_supported_format(dev);
--			mbus_fmt->code = fmt->code;
--
--			ret = v4l2_subdev_call(dev->sensor, pad, set_fmt,
--					       dev->sensor_config, &sd_fmt);
--			if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
--				return ret;
--
--			if (mbus_fmt->field != V4L2_FIELD_NONE)
--				unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n");
--
--			v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format);
--
--			if (mbus_fmt->code != fmt->code) {
--				/* We've set a format that the sensor reports
--				 * as being supported, but it refuses to set it.
--				 * Not much else we can do.
--				 * Assume that the sensor driver may accept the
--				 * format when it is set (rather than tried).
--				 */
--				unicam_err(dev, "Sensor won't accept default format, and Unicam can't support sensor default\n");
--			}
--		}
--
--		if (fmt->fourcc)
--			f->fmt.pix.pixelformat = fmt->fourcc;
--		else
--			f->fmt.pix.pixelformat = fmt->repacked_fourcc;
--	}
--
--	return unicam_calc_format_size_bpl(dev, fmt, f);
--}
--
--static int unicam_s_fmt_vid_cap(struct file *file, void *priv,
--				struct v4l2_format *f)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct vb2_queue *q = &node->buffer_queue;
--	struct v4l2_mbus_framefmt mbus_fmt = {0};
--	const struct unicam_fmt *fmt;
--	int ret;
--
--	if (vb2_is_busy(q))
--		return -EBUSY;
--
--	ret = unicam_try_fmt_vid_cap(file, priv, f);
--	if (ret < 0)
--		return ret;
--
--	fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat);
--	if (!fmt) {
--		/* Unknown pixel format - adopt a default.
--		 * This shouldn't happen as try_fmt should have resolved any
--		 * issues first.
--		 */
--		fmt = get_first_supported_format(dev);
--		if (!fmt)
--			/* It shouldn't be possible to get here with no
--			 * supported formats
--			 */
--			return -EINVAL;
--		f->fmt.pix.pixelformat = fmt->fourcc;
--		return -EINVAL;
--	}
--
--	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code);
--
--	ret = __subdev_set_format(dev, &mbus_fmt, node->pad_id);
--	if (ret) {
--		unicam_dbg(3, dev, "%s __subdev_set_format failed %d\n",
--			   __func__, ret);
--		return ret;
--	}
--
--	/* Just double check nothing has gone wrong */
--	if (mbus_fmt.code != fmt->code) {
--		unicam_dbg(3, dev,
--			   "%s subdev changed format on us, this should not happen\n",
--			   __func__);
--		return -EINVAL;
--	}
--
--	node->fmt = fmt;
--	node->v_fmt.fmt.pix.pixelformat = f->fmt.pix.pixelformat;
--	node->v_fmt.fmt.pix.bytesperline = f->fmt.pix.bytesperline;
--	unicam_reset_format(node);
--
--	unicam_dbg(3, dev,
--		   "%s %dx%d, mbus_fmt 0x%08X, V4L2 pix 0x%08X.\n",
--		   __func__, node->v_fmt.fmt.pix.width,
--		   node->v_fmt.fmt.pix.height, mbus_fmt.code,
--		   node->v_fmt.fmt.pix.pixelformat);
--
--	*f = node->v_fmt;
--
--	return 0;
--}
--
--static int unicam_enum_fmt_meta_cap(struct file *file, void *priv,
--				    struct v4l2_fmtdesc *f)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct v4l2_subdev_mbus_code_enum mbus_code;
--	const struct unicam_fmt *fmt = NULL;
--	int ret = 0;
--
--	if (node->pad_id != METADATA_PAD || f->index != 0)
--		return -EINVAL;
--
--	if (dev->sensor_embedded_data) {
--		memset(&mbus_code, 0, sizeof(mbus_code));
--		mbus_code.index = f->index;
--		mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
--		mbus_code.pad = METADATA_PAD;
--
--		ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code, NULL,
--				       &mbus_code);
--		if (ret < 0) {
--			unicam_dbg(2, dev,
--				   "subdev->enum_mbus_code idx 0 returned %d - index invalid\n",
--				   ret);
--			return -EINVAL;
--		}
--	} else {
--		mbus_code.code = MEDIA_BUS_FMT_SENSOR_DATA;
--	}
--
--	fmt = find_format_by_code(mbus_code.code);
--	if (fmt)
--		f->pixelformat = fmt->fourcc;
--
--	return 0;
--}
--
--static int unicam_g_fmt_meta_cap(struct file *file, void *priv,
--				 struct v4l2_format *f)
--{
--	struct unicam_node *node = video_drvdata(file);
--
--	if (node->pad_id != METADATA_PAD)
--		return -EINVAL;
--
--	*f = node->v_fmt;
--
--	return 0;
--}
--
--static int unicam_try_fmt_meta_cap(struct file *file, void *priv,
--				   struct v4l2_format *f)
--{
--	struct unicam_node *node = video_drvdata(file);
--
--	if (node->pad_id != METADATA_PAD)
--		return -EINVAL;
--
--	*f = node->v_fmt;
--
--	return 0;
--}
--
--static int unicam_s_fmt_meta_cap(struct file *file, void *priv,
--				 struct v4l2_format *f)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct v4l2_mbus_framefmt mbus_fmt = { 0 };
--	const struct unicam_fmt *fmt;
--	int ret;
--
--	if (node->pad_id == IMAGE_PAD)
--		return -EINVAL;
--
--	if (dev->sensor_embedded_data) {
--		fmt = find_format_by_pix(dev, f->fmt.meta.dataformat);
--		if (!fmt) {
--			unicam_err(dev, "unknown format: V4L2 pix 0x%08x\n",
--				   f->fmt.meta.dataformat);
--			return -EINVAL;
--		}
--		mbus_fmt.code = fmt->code;
--		ret = __subdev_set_format(dev, &mbus_fmt, node->pad_id);
--		if (ret) {
--			unicam_dbg(3, dev, "%s __subdev_set_format failed %d\n",
--				   __func__, ret);
--			return ret;
--		}
--	}
--
--	*f = node->v_fmt;
--
--	unicam_dbg(3, dev, "%s size %d, V4L2 pix 0x%08x\n",
--		   __func__, node->v_fmt.fmt.meta.buffersize,
--		   node->v_fmt.fmt.meta.dataformat);
--
--	return 0;
--}
--
--static int unicam_queue_setup(struct vb2_queue *vq,
--			      unsigned int *nbuffers,
--			      unsigned int *nplanes,
--			      unsigned int sizes[],
--			      struct device *alloc_devs[])
--{
--	struct unicam_node *node = vb2_get_drv_priv(vq);
--	struct unicam_device *dev = node->dev;
--	unsigned int size = node->pad_id == IMAGE_PAD ?
--				    node->v_fmt.fmt.pix.sizeimage :
--				    node->v_fmt.fmt.meta.buffersize;
--
--	if (vq->num_buffers + *nbuffers < 3)
--		*nbuffers = 3 - vq->num_buffers;
--
--	if (*nplanes) {
--		if (sizes[0] < size) {
--			unicam_err(dev, "sizes[0] %i < size %u\n", sizes[0],
--				   size);
--			return -EINVAL;
--		}
--		size = sizes[0];
--	}
--
--	*nplanes = 1;
--	sizes[0] = size;
--
--	return 0;
--}
--
--static int unicam_buffer_prepare(struct vb2_buffer *vb)
--{
--	struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue);
--	struct unicam_device *dev = node->dev;
--	struct unicam_buffer *buf = container_of(vb, struct unicam_buffer,
--					      vb.vb2_buf);
--	unsigned long size;
--
--	if (WARN_ON(!node->fmt))
--		return -EINVAL;
--
--	size = node->pad_id == IMAGE_PAD ? node->v_fmt.fmt.pix.sizeimage :
--					   node->v_fmt.fmt.meta.buffersize;
--	if (vb2_plane_size(vb, 0) < size) {
--		unicam_err(dev, "data will not fit into plane (%lu < %lu)\n",
--			   vb2_plane_size(vb, 0), size);
--		return -EINVAL;
--	}
--
--	vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
--	return 0;
--}
--
--static void unicam_buffer_queue(struct vb2_buffer *vb)
--{
--	struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue);
--	struct unicam_buffer *buf = container_of(vb, struct unicam_buffer,
--					      vb.vb2_buf);
--	struct unicam_dmaqueue *dma_queue = &node->dma_queue;
--	unsigned long flags = 0;
--
--	spin_lock_irqsave(&node->dma_queue_lock, flags);
--	list_add_tail(&buf->list, &dma_queue->active);
--	spin_unlock_irqrestore(&node->dma_queue_lock, flags);
--}
--
--static void unicam_set_packing_config(struct unicam_device *dev)
--{
--	int pack, unpack;
--	u32 val;
--
--	if (dev->node[IMAGE_PAD].v_fmt.fmt.pix.pixelformat ==
--	    dev->node[IMAGE_PAD].fmt->fourcc) {
--		unpack = UNICAM_PUM_NONE;
--		pack = UNICAM_PPM_NONE;
--	} else {
--		switch (dev->node[IMAGE_PAD].fmt->depth) {
--		case 8:
--			unpack = UNICAM_PUM_UNPACK8;
--			break;
--		case 10:
--			unpack = UNICAM_PUM_UNPACK10;
--			break;
--		case 12:
--			unpack = UNICAM_PUM_UNPACK12;
--			break;
--		case 14:
--			unpack = UNICAM_PUM_UNPACK14;
--			break;
--		case 16:
--			unpack = UNICAM_PUM_UNPACK16;
--			break;
--		default:
--			unpack = UNICAM_PUM_NONE;
--			break;
--		}
--
--		/* Repacking is always to 16bpp */
--		pack = UNICAM_PPM_PACK16;
--	}
--
--	val = 0;
--	set_field(&val, unpack, UNICAM_PUM_MASK);
--	set_field(&val, pack, UNICAM_PPM_MASK);
--	reg_write(&dev->cfg, UNICAM_IPIPE, val);
--}
--
--static void unicam_cfg_image_id(struct unicam_device *dev)
--{
--	struct unicam_cfg *cfg = &dev->cfg;
--
--	if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
--		/* CSI2 mode */
--		reg_write(cfg, UNICAM_IDI0,
--			  (dev->virtual_channel << 6) |
--					      dev->node[IMAGE_PAD].fmt->csi_dt);
--	} else {
--		/* CCP2 mode */
--		reg_write(cfg, UNICAM_IDI0,
--			  0x80 | dev->node[IMAGE_PAD].fmt->csi_dt);
--	}
--}
--
--static void unicam_enable_ed(struct unicam_device *dev)
--{
--	struct unicam_cfg *cfg = &dev->cfg;
--	u32 val = reg_read(cfg, UNICAM_DCS);
--
--	set_field(&val, 2, UNICAM_EDL_MASK);
--	/* Do not wrap at the end of the embedded data buffer */
--	set_field(&val, 0, UNICAM_DBOB);
--
--	reg_write(cfg, UNICAM_DCS, val);
--}
--
--static void unicam_start_rx(struct unicam_device *dev, dma_addr_t *addr)
--{
--	struct unicam_cfg *cfg = &dev->cfg;
--	int line_int_freq = dev->node[IMAGE_PAD].v_fmt.fmt.pix.height >> 2;
--	unsigned int size, i;
--	u32 val;
--
--	if (line_int_freq < 128)
--		line_int_freq = 128;
--
--	/* Enable lane clocks */
--	val = 1;
--	for (i = 0; i < dev->active_data_lanes; i++)
--		val = val << 2 | 1;
--	clk_write(cfg, val);
--
--	/* Basic init */
--	reg_write(cfg, UNICAM_CTRL, UNICAM_MEM);
--
--	/* Enable analogue control, and leave in reset. */
--	val = UNICAM_AR;
--	set_field(&val, 7, UNICAM_CTATADJ_MASK);
--	set_field(&val, 7, UNICAM_PTATADJ_MASK);
--	reg_write(cfg, UNICAM_ANA, val);
--	usleep_range(1000, 2000);
--
--	/* Come out of reset */
--	reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_AR);
--
--	/* Peripheral reset */
--	reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR);
--	reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR);
--
--	reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE);
--
--	/* Enable Rx control. */
--	val = reg_read(cfg, UNICAM_CTRL);
--	if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
--		set_field(&val, UNICAM_CPM_CSI2, UNICAM_CPM_MASK);
--		set_field(&val, UNICAM_DCM_STROBE, UNICAM_DCM_MASK);
--	} else {
--		set_field(&val, UNICAM_CPM_CCP2, UNICAM_CPM_MASK);
--		set_field(&val, dev->bus_flags, UNICAM_DCM_MASK);
--	}
--	/* Packet framer timeout */
--	set_field(&val, 0xf, UNICAM_PFT_MASK);
--	set_field(&val, 128, UNICAM_OET_MASK);
--	reg_write(cfg, UNICAM_CTRL, val);
--
--	reg_write(cfg, UNICAM_IHWIN, 0);
--	reg_write(cfg, UNICAM_IVWIN, 0);
--
--	/* AXI bus access QoS setup */
--	val = reg_read(&dev->cfg, UNICAM_PRI);
--	set_field(&val, 0, UNICAM_BL_MASK);
--	set_field(&val, 0, UNICAM_BS_MASK);
--	set_field(&val, 0xe, UNICAM_PP_MASK);
--	set_field(&val, 8, UNICAM_NP_MASK);
--	set_field(&val, 2, UNICAM_PT_MASK);
--	set_field(&val, 1, UNICAM_PE);
--	reg_write(cfg, UNICAM_PRI, val);
--
--	reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_DDL);
--
--	/* Always start in trigger frame capture mode (UNICAM_FCM set) */
--	val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM | UNICAM_IBOB;
--	set_field(&val,  line_int_freq, UNICAM_LCIE_MASK);
--	reg_write(cfg, UNICAM_ICTL, val);
--	reg_write(cfg, UNICAM_STA, UNICAM_STA_MASK_ALL);
--	reg_write(cfg, UNICAM_ISTA, UNICAM_ISTA_MASK_ALL);
--
--	/* tclk_term_en */
--	reg_write_field(cfg, UNICAM_CLT, 2, UNICAM_CLT1_MASK);
--	/* tclk_settle */
--	reg_write_field(cfg, UNICAM_CLT, 6, UNICAM_CLT2_MASK);
--	/* td_term_en */
--	reg_write_field(cfg, UNICAM_DLT, 2, UNICAM_DLT1_MASK);
--	/* ths_settle */
--	reg_write_field(cfg, UNICAM_DLT, 6, UNICAM_DLT2_MASK);
--	/* trx_enable */
--	reg_write_field(cfg, UNICAM_DLT, 0, UNICAM_DLT3_MASK);
--
--	reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_SOE);
--
--	/* Packet compare setup - required to avoid missing frame ends */
--	val = 0;
--	set_field(&val, 1, UNICAM_PCE);
--	set_field(&val, 1, UNICAM_GI);
--	set_field(&val, 1, UNICAM_CPH);
--	set_field(&val, 0, UNICAM_PCVC_MASK);
--	set_field(&val, 1, UNICAM_PCDT_MASK);
--	reg_write(cfg, UNICAM_CMP0, val);
--
--	/* Enable clock lane and set up terminations */
--	val = 0;
--	if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
--		/* CSI2 */
--		set_field(&val, 1, UNICAM_CLE);
--		set_field(&val, 1, UNICAM_CLLPE);
--		if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) {
--			set_field(&val, 1, UNICAM_CLTRE);
--			set_field(&val, 1, UNICAM_CLHSE);
--		}
--	} else {
--		/* CCP2 */
--		set_field(&val, 1, UNICAM_CLE);
--		set_field(&val, 1, UNICAM_CLHSE);
--		set_field(&val, 1, UNICAM_CLTRE);
--	}
--	reg_write(cfg, UNICAM_CLK, val);
--
--	/*
--	 * Enable required data lanes with appropriate terminations.
--	 * The same value needs to be written to UNICAM_DATn registers for
--	 * the active lanes, and 0 for inactive ones.
--	 */
--	val = 0;
--	if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
--		/* CSI2 */
--		set_field(&val, 1, UNICAM_DLE);
--		set_field(&val, 1, UNICAM_DLLPE);
--		if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) {
--			set_field(&val, 1, UNICAM_DLTRE);
--			set_field(&val, 1, UNICAM_DLHSE);
--		}
--	} else {
--		/* CCP2 */
--		set_field(&val, 1, UNICAM_DLE);
--		set_field(&val, 1, UNICAM_DLHSE);
--		set_field(&val, 1, UNICAM_DLTRE);
--	}
--	reg_write(cfg, UNICAM_DAT0, val);
--
--	if (dev->active_data_lanes == 1)
--		val = 0;
--	reg_write(cfg, UNICAM_DAT1, val);
--
--	if (dev->max_data_lanes > 2) {
--		/*
--		 * Registers UNICAM_DAT2 and UNICAM_DAT3 only valid if the
--		 * instance supports more than 2 data lanes.
--		 */
--		if (dev->active_data_lanes == 2)
--			val = 0;
--		reg_write(cfg, UNICAM_DAT2, val);
--
--		if (dev->active_data_lanes == 3)
--			val = 0;
--		reg_write(cfg, UNICAM_DAT3, val);
--	}
--
--	reg_write(&dev->cfg, UNICAM_IBLS,
--		  dev->node[IMAGE_PAD].v_fmt.fmt.pix.bytesperline);
--	size = dev->node[IMAGE_PAD].v_fmt.fmt.pix.sizeimage;
--	unicam_wr_dma_addr(&dev->cfg, addr[IMAGE_PAD], size, IMAGE_PAD);
--	unicam_set_packing_config(dev);
--	unicam_cfg_image_id(dev);
--
--	val = reg_read(cfg, UNICAM_MISC);
--	set_field(&val, 1, UNICAM_FL0);
--	set_field(&val, 1, UNICAM_FL1);
--	reg_write(cfg, UNICAM_MISC, val);
--
--	if (dev->node[METADATA_PAD].streaming && dev->sensor_embedded_data) {
--		size = dev->node[METADATA_PAD].v_fmt.fmt.meta.buffersize;
--		unicam_enable_ed(dev);
--		unicam_wr_dma_addr(&dev->cfg, addr[METADATA_PAD], size,
--				   METADATA_PAD);
--	}
--
--	/* Enable peripheral */
--	reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPE);
--
--	/* Load image pointers */
--	reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_LIP_MASK);
--
--	/* Load embedded data buffer pointers if needed */
--	if (dev->node[METADATA_PAD].streaming && dev->sensor_embedded_data)
--		reg_write_field(cfg, UNICAM_DCS, 1, UNICAM_LDP);
--
--	/*
--	 * Enable trigger only for the first frame to
--	 * sync correctly to the FS from the source.
--	 */
--	reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_TFC);
--}
--
--static void unicam_disable(struct unicam_device *dev)
--{
--	struct unicam_cfg *cfg = &dev->cfg;
--
--	/* Analogue lane control disable */
--	reg_write_field(cfg, UNICAM_ANA, 1, UNICAM_DDL);
--
--	/* Stop the output engine */
--	reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_SOE);
--
--	/* Disable the data lanes. */
--	reg_write(cfg, UNICAM_DAT0, 0);
--	reg_write(cfg, UNICAM_DAT1, 0);
--
--	if (dev->max_data_lanes > 2) {
--		reg_write(cfg, UNICAM_DAT2, 0);
--		reg_write(cfg, UNICAM_DAT3, 0);
--	}
--
--	/* Peripheral reset */
--	reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR);
--	usleep_range(50, 100);
--	reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR);
--
--	/* Disable peripheral */
--	reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE);
--
--	/* Clear ED setup */
--	reg_write(cfg, UNICAM_DCS, 0);
--
--	/* Disable all lane clocks */
--	clk_write(cfg, 0);
--}
--
--static int unicam_start_streaming(struct vb2_queue *vq, unsigned int count)
--{
--	struct unicam_node *node = vb2_get_drv_priv(vq);
--	struct unicam_device *dev = node->dev;
--	struct unicam_buffer *buf;
--	dma_addr_t buffer_addr[MAX_NODES] = { 0 };
--	int num_nodes_streaming;
--	unsigned long flags;
--	int ret, i;
--
--	node->streaming = 1;
--	if (!unicam_all_nodes_streaming(dev)) {
--		unicam_dbg(3, dev, "Not all nodes are streaming yet.");
--		return 0;
--	}
--
--	dev->sequence = 0;
--	ret = unicam_runtime_get(dev);
--	if (ret < 0) {
--		unicam_dbg(3, dev, "unicam_runtime_get failed\n");
--		return ret;
--	}
--
--	dev->active_data_lanes = dev->max_data_lanes;
--	if (dev->bus_type == V4L2_MBUS_CSI2_DPHY &&
--	    v4l2_subdev_has_op(dev->sensor, video, g_mbus_config)) {
--		struct v4l2_mbus_config mbus_config;
--
--		ret = v4l2_subdev_call(dev->sensor, video, g_mbus_config,
--				       &mbus_config);
--		if (ret < 0) {
--			unicam_dbg(3, dev, "g_mbus_config failed\n");
--			goto err_pm_put;
--		}
--
--		dev->active_data_lanes =
--			(mbus_config.flags & V4L2_MBUS_CSI2_LANE_MASK) >>
--					__ffs(V4L2_MBUS_CSI2_LANE_MASK);
--		if (!dev->active_data_lanes)
--			dev->active_data_lanes = dev->max_data_lanes;
--	}
--	if (dev->active_data_lanes > dev->max_data_lanes) {
--		unicam_err(dev,	"Device has requested %u data lanes, which is >%u configured in DT\n",
--			   dev->active_data_lanes, dev->max_data_lanes);
--		ret = -EINVAL;
--		goto err_pm_put;
--	}
--
--	unicam_dbg(1, dev, "Running with %u data lanes\n",
--		   dev->active_data_lanes);
--
--	ret = clk_set_rate(dev->clock, 100 * 1000 * 1000);
--	if (ret) {
--		unicam_err(dev, "failed to set up clock\n");
--		goto err_pm_put;
--	}
--
--	ret = clk_prepare_enable(dev->clock);
--	if (ret) {
--		unicam_err(dev, "Failed to enable CSI clock: %d\n", ret);
--		goto err_pm_put;
--	}
--
--	num_nodes_streaming = unicam_num_nodes_streaming(dev);
--	for (i = 0; i < num_nodes_streaming; i++) {
--		spin_lock_irqsave(&dev->node[i].dma_queue_lock, flags);
--		buf = list_entry(dev->node[i].dma_queue.active.next,
--				 struct unicam_buffer, list);
--		dev->node[i].cur_frm = buf;
--		dev->node[i].next_frm = buf;
--		list_del(&buf->list);
--		spin_unlock_irqrestore(&dev->node[i].dma_queue_lock, flags);
--		buffer_addr[i] =
--		vb2_dma_contig_plane_dma_addr(&dev->node[i].cur_frm->vb.vb2_buf,
--					      0);
--	}
--
--	unicam_start_rx(dev, buffer_addr);
--
--	ret = v4l2_subdev_call(dev->sensor, video, s_stream, 1);
--	if (ret < 0) {
--		unicam_err(dev, "stream on failed in subdev\n");
--		goto err_disable_unicam;
--	}
--
--	return 0;
--
--err_disable_unicam:
--	node->streaming = 0;
--	unicam_disable(dev);
--	clk_disable_unprepare(dev->clock);
--err_pm_put:
--	unicam_runtime_put(dev);
--
--	return ret;
--}
--
--static void unicam_stop_streaming(struct vb2_queue *vq)
--{
--	struct unicam_node *node = vb2_get_drv_priv(vq);
--	struct unicam_device *dev = node->dev;
--	struct unicam_dmaqueue *dma_q = &node->dma_queue;
--	struct unicam_buffer *buf, *tmp;
--	unsigned long flags;
--
--	node->streaming = 0;
--
--	if (node->pad_id == IMAGE_PAD) {
--		/* Stop streaming the sensor and disable the peripheral.
--		 * We cannot continue streaming embedded data with the
--		 * image pad disabled.
--		 */
--		if (v4l2_subdev_call(dev->sensor, video, s_stream, 0) < 0)
--			unicam_err(dev, "stream off failed in subdev\n");
--
--		unicam_disable(dev);
--		clk_disable_unprepare(dev->clock);
--		unicam_runtime_put(dev);
--
--	} else if (node->pad_id == METADATA_PAD) {
--		/* Allow the hardware to spin in the dummy buffer.
--		 * This is only really needed if the embedded data pad is
--		 * disabled before the image pad.  The 0x3 in the top two bits
--		 * signifies uncached accesses through the Videocore memory
--		 * controller.
--		 */
--		unicam_wr_dma_addr(&dev->cfg, node->dummy_buf_dma_addr,
--				   DUMMY_BUF_SIZE, METADATA_PAD);
--	}
--
--	/* Clear all queued buffers for the node */
--	spin_lock_irqsave(&node->dma_queue_lock, flags);
--	list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
--		list_del(&buf->list);
--		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
--	}
--
--	if (node->cur_frm)
--		vb2_buffer_done(&node->cur_frm->vb.vb2_buf,
--				VB2_BUF_STATE_ERROR);
--	if (node->next_frm && node->cur_frm != node->next_frm)
--		vb2_buffer_done(&node->next_frm->vb.vb2_buf,
--				VB2_BUF_STATE_ERROR);
--
--	node->cur_frm = NULL;
--	node->next_frm = NULL;
--	spin_unlock_irqrestore(&node->dma_queue_lock, flags);
--}
--
--static int unicam_enum_input(struct file *file, void *priv,
--			     struct v4l2_input *inp)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	if (inp->index != 0)
--		return -EINVAL;
--
--	inp->type = V4L2_INPUT_TYPE_CAMERA;
--	if (v4l2_subdev_has_op(dev->sensor, video, s_dv_timings)) {
--		inp->capabilities = V4L2_IN_CAP_DV_TIMINGS;
--		inp->std = 0;
--	} else if (v4l2_subdev_has_op(dev->sensor, video, s_std)) {
--		inp->capabilities = V4L2_IN_CAP_STD;
--		if (v4l2_subdev_call(dev->sensor, video, g_tvnorms, &inp->std)
--					< 0)
--			inp->std = V4L2_STD_ALL;
--	} else {
--		inp->capabilities = 0;
--		inp->std = 0;
--	}
--	sprintf(inp->name, "Camera 0");
--	return 0;
--}
--
--static int unicam_g_input(struct file *file, void *priv, unsigned int *i)
--{
--	*i = 0;
--
--	return 0;
--}
--
--static int unicam_s_input(struct file *file, void *priv, unsigned int i)
--{
--	/*
--	 * FIXME: Ideally we would like to be able to query the source
--	 * subdevice for information over the input connectors it supports,
--	 * and map that through in to a call to video_ops->s_routing.
--	 * There is no infrastructure support for defining that within
--	 * devicetree at present. Until that is implemented we can't
--	 * map a user physical connector number to s_routing input number.
--	 */
--	if (i > 0)
--		return -EINVAL;
--
--	return 0;
--}
--
--static int unicam_querystd(struct file *file, void *priv,
--			   v4l2_std_id *std)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_subdev_call(dev->sensor, video, querystd, std);
--}
--
--static int unicam_g_std(struct file *file, void *priv, v4l2_std_id *std)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_subdev_call(dev->sensor, video, g_std, std);
--}
--
--static int unicam_s_std(struct file *file, void *priv, v4l2_std_id std)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	int ret;
--	v4l2_std_id current_std;
--
--	ret = v4l2_subdev_call(dev->sensor, video, g_std, &current_std);
--	if (ret)
--		return ret;
--
--	if (std == current_std)
--		return 0;
--
--	if (vb2_is_busy(&node->buffer_queue))
--		return -EBUSY;
--
--	ret = v4l2_subdev_call(dev->sensor, video, s_std, std);
--
--	/* Force recomputation of bytesperline */
--	node->v_fmt.fmt.pix.bytesperline = 0;
--
--	unicam_reset_format(node);
--
--	return ret;
--}
--
--static int unicam_s_edid(struct file *file, void *priv, struct v4l2_edid *edid)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_subdev_call(dev->sensor, pad, set_edid, edid);
--}
--
--static int unicam_g_edid(struct file *file, void *priv, struct v4l2_edid *edid)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_subdev_call(dev->sensor, pad, get_edid, edid);
--}
--
--static int unicam_s_selection(struct file *file, void *priv,
--			      struct v4l2_selection *sel)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct v4l2_subdev_selection sdsel = {
--		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
--		.target = sel->target,
--		.flags = sel->flags,
--		.r = sel->r,
--	};
--
--	return v4l2_subdev_call(dev->sensor, pad, set_selection, NULL, &sdsel);
--}
--
--static int unicam_g_selection(struct file *file, void *priv,
--			      struct v4l2_selection *sel)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct v4l2_subdev_selection sdsel = {
--		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
--		.target = sel->target,
--	};
--	int ret;
--
--	ret = v4l2_subdev_call(dev->sensor, pad, get_selection, NULL, &sdsel);
--	if (!ret)
--		sel->r = sdsel.r;
--
--	return ret;
--}
--
--static int unicam_enum_framesizes(struct file *file, void *priv,
--				  struct v4l2_frmsizeenum *fsize)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	const struct unicam_fmt *fmt;
--	struct v4l2_subdev_frame_size_enum fse;
--	int ret;
--
--	if (node->pad_id == IMAGE_PAD) {
--		/* check for valid format */
--		fmt = find_format_by_pix(dev, fsize->pixel_format);
--		if (!fmt) {
--			unicam_dbg(3, dev, "Invalid pixel code: %x\n",
--				   fsize->pixel_format);
--			return -EINVAL;
--		}
--		fse.code = fmt->code;
--	} else {
--		/* This pad is for embedded data, so just set the format */
--		fse.code = MEDIA_BUS_FMT_SENSOR_DATA;
--	}
--
--	fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
--	fse.index = fsize->index;
--	fse.pad = node->pad_id;
--
--	ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_size, NULL, &fse);
--	if (ret)
--		return ret;
--
--	unicam_dbg(1, dev, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
--		   __func__, fse.index, fse.code, fse.min_width, fse.max_width,
--		   fse.min_height, fse.max_height);
--
--	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
--	fsize->discrete.width = fse.max_width;
--	fsize->discrete.height = fse.max_height;
--
--	return 0;
--}
--
--static int unicam_enum_frameintervals(struct file *file, void *priv,
--				      struct v4l2_frmivalenum *fival)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	const struct unicam_fmt *fmt;
--	struct v4l2_subdev_frame_interval_enum fie = {
--		.index = fival->index,
--		.width = fival->width,
--		.height = fival->height,
--		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
--	};
--	int ret;
--
--	fmt = find_format_by_pix(dev, fival->pixel_format);
--	if (!fmt)
--		return -EINVAL;
--
--	fie.code = fmt->code;
--	ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_interval,
--			       NULL, &fie);
--	if (ret)
--		return ret;
--
--	fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
--	fival->discrete = fie.interval;
--
--	return 0;
--}
--
--static int unicam_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_g_parm_cap(video_devdata(file), dev->sensor, a);
--}
--
--static int unicam_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_s_parm_cap(video_devdata(file), dev->sensor, a);
--}
--
--static int unicam_g_dv_timings(struct file *file, void *priv,
--			       struct v4l2_dv_timings *timings)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_subdev_call(dev->sensor, video, g_dv_timings, timings);
--}
--
--static int unicam_s_dv_timings(struct file *file, void *priv,
--			       struct v4l2_dv_timings *timings)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct v4l2_dv_timings current_timings;
--	int ret;
--
--	ret = v4l2_subdev_call(dev->sensor, video, g_dv_timings,
--			       &current_timings);
--
--	if (v4l2_match_dv_timings(timings, &current_timings, 0, false))
--		return 0;
--
--	if (vb2_is_busy(&node->buffer_queue))
--		return -EBUSY;
--
--	ret = v4l2_subdev_call(dev->sensor, video, s_dv_timings, timings);
--
--	/* Force recomputation of bytesperline */
--	node->v_fmt.fmt.pix.bytesperline = 0;
--
--	unicam_reset_format(node);
--
--	return ret;
--}
--
--static int unicam_query_dv_timings(struct file *file, void *priv,
--				   struct v4l2_dv_timings *timings)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_subdev_call(dev->sensor, video, query_dv_timings, timings);
--}
--
--static int unicam_enum_dv_timings(struct file *file, void *priv,
--				  struct v4l2_enum_dv_timings *timings)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_subdev_call(dev->sensor, pad, enum_dv_timings, timings);
--}
--
--static int unicam_dv_timings_cap(struct file *file, void *priv,
--				 struct v4l2_dv_timings_cap *cap)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--
--	return v4l2_subdev_call(dev->sensor, pad, dv_timings_cap, cap);
--}
--
--static int unicam_subscribe_event(struct v4l2_fh *fh,
--				  const struct v4l2_event_subscription *sub)
--{
--	switch (sub->type) {
--	case V4L2_EVENT_FRAME_SYNC:
--		return v4l2_event_subscribe(fh, sub, 2, NULL);
--	case V4L2_EVENT_SOURCE_CHANGE:
--		return v4l2_event_subscribe(fh, sub, 4, NULL);
--	}
--
--	return v4l2_ctrl_subscribe_event(fh, sub);
--}
--
--static int unicam_log_status(struct file *file, void *fh)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct unicam_cfg *cfg = &dev->cfg;
--	u32 reg;
--
--	/* status for sub devices */
--	v4l2_device_call_all(&dev->v4l2_dev, 0, core, log_status);
--
--	unicam_info(dev, "-----Receiver status-----\n");
--	unicam_info(dev, "V4L2 width/height:   %ux%u\n",
--		    node->v_fmt.fmt.pix.width, node->v_fmt.fmt.pix.height);
--	unicam_info(dev, "Mediabus format:     %08x\n", node->fmt->code);
--	unicam_info(dev, "V4L2 format:         %08x\n",
--		    node->v_fmt.fmt.pix.pixelformat);
--	reg = reg_read(&dev->cfg, UNICAM_IPIPE);
--	unicam_info(dev, "Unpacking/packing:   %u / %u\n",
--		    get_field(reg, UNICAM_PUM_MASK),
--		    get_field(reg, UNICAM_PPM_MASK));
--	unicam_info(dev, "----Live data----\n");
--	unicam_info(dev, "Programmed stride:   %4u\n",
--		    reg_read(cfg, UNICAM_IBLS));
--	unicam_info(dev, "Detected resolution: %ux%u\n",
--		    reg_read(cfg, UNICAM_IHSTA),
--		    reg_read(cfg, UNICAM_IVSTA));
--	unicam_info(dev, "Write pointer:       %08x\n",
--		    reg_read(cfg, UNICAM_IBWP));
--
--	return 0;
--}
--
--static void unicam_notify(struct v4l2_subdev *sd,
--			  unsigned int notification, void *arg)
--{
--	struct unicam_device *dev =
--		container_of(sd->v4l2_dev, struct unicam_device, v4l2_dev);
--
--	switch (notification) {
--	case V4L2_DEVICE_NOTIFY_EVENT:
--		v4l2_event_queue(&dev->node[IMAGE_PAD].video_dev, arg);
--		break;
--	default:
--		break;
--	}
--}
--
--static const struct vb2_ops unicam_video_qops = {
--	.wait_prepare		= vb2_ops_wait_prepare,
--	.wait_finish		= vb2_ops_wait_finish,
--	.queue_setup		= unicam_queue_setup,
--	.buf_prepare		= unicam_buffer_prepare,
--	.buf_queue		= unicam_buffer_queue,
--	.start_streaming	= unicam_start_streaming,
--	.stop_streaming		= unicam_stop_streaming,
--};
--
--/*
-- * unicam_open : This function is based on the v4l2_fh_open helper function.
-- * It has been augmented to handle sensor subdevice power management,
-- */
--static int unicam_open(struct file *file)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	int ret;
--
--	mutex_lock(&node->lock);
--
--	ret = v4l2_fh_open(file);
--	if (ret) {
--		unicam_err(dev, "v4l2_fh_open failed\n");
--		goto unlock;
--	}
--
--	node->open++;
--
--	if (!v4l2_fh_is_singular_file(file))
--		goto unlock;
--
--	ret = v4l2_subdev_call(dev->sensor, core, s_power, 1);
--	if (ret < 0 && ret != -ENOIOCTLCMD) {
--		v4l2_fh_release(file);
--		node->open--;
--		goto unlock;
--	}
--
--	ret = 0;
--
--unlock:
--	mutex_unlock(&node->lock);
--	return ret;
--}
--
--static int unicam_release(struct file *file)
--{
--	struct unicam_node *node = video_drvdata(file);
--	struct unicam_device *dev = node->dev;
--	struct v4l2_subdev *sd = dev->sensor;
--	bool fh_singular;
--	int ret;
--
--	mutex_lock(&node->lock);
--
--	fh_singular = v4l2_fh_is_singular_file(file);
--
--	ret = _vb2_fop_release(file, NULL);
--
--	if (fh_singular)
--		v4l2_subdev_call(sd, core, s_power, 0);
--
--	node->open--;
--	mutex_unlock(&node->lock);
--
--	return ret;
--}
--
--/* unicam capture driver file operations */
--static const struct v4l2_file_operations unicam_fops = {
--	.owner		= THIS_MODULE,
--	.open           = unicam_open,
--	.release        = unicam_release,
--	.read		= vb2_fop_read,
--	.poll		= vb2_fop_poll,
--	.unlocked_ioctl	= video_ioctl2,
--	.mmap		= vb2_fop_mmap,
--};
--
--/* unicam capture ioctl operations */
--static const struct v4l2_ioctl_ops unicam_ioctl_ops = {
--	.vidioc_querycap		= unicam_querycap,
--	.vidioc_enum_fmt_vid_cap	= unicam_enum_fmt_vid_cap,
--	.vidioc_g_fmt_vid_cap		= unicam_g_fmt_vid_cap,
--	.vidioc_s_fmt_vid_cap		= unicam_s_fmt_vid_cap,
--	.vidioc_try_fmt_vid_cap		= unicam_try_fmt_vid_cap,
--
--	.vidioc_enum_fmt_meta_cap	= unicam_enum_fmt_meta_cap,
--	.vidioc_g_fmt_meta_cap		= unicam_g_fmt_meta_cap,
--	.vidioc_s_fmt_meta_cap		= unicam_s_fmt_meta_cap,
--	.vidioc_try_fmt_meta_cap	= unicam_try_fmt_meta_cap,
--
--	.vidioc_enum_input		= unicam_enum_input,
--	.vidioc_g_input			= unicam_g_input,
--	.vidioc_s_input			= unicam_s_input,
--
--	.vidioc_querystd		= unicam_querystd,
--	.vidioc_s_std			= unicam_s_std,
--	.vidioc_g_std			= unicam_g_std,
--
--	.vidioc_g_edid			= unicam_g_edid,
--	.vidioc_s_edid			= unicam_s_edid,
--
--	.vidioc_enum_framesizes		= unicam_enum_framesizes,
--	.vidioc_enum_frameintervals	= unicam_enum_frameintervals,
--
--	.vidioc_g_selection		= unicam_g_selection,
--	.vidioc_s_selection		= unicam_s_selection,
--
--	.vidioc_g_parm			= unicam_g_parm,
--	.vidioc_s_parm			= unicam_s_parm,
--
--	.vidioc_s_dv_timings		= unicam_s_dv_timings,
--	.vidioc_g_dv_timings		= unicam_g_dv_timings,
--	.vidioc_query_dv_timings	= unicam_query_dv_timings,
--	.vidioc_enum_dv_timings		= unicam_enum_dv_timings,
--	.vidioc_dv_timings_cap		= unicam_dv_timings_cap,
--
--	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
--	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
--	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
--	.vidioc_querybuf		= vb2_ioctl_querybuf,
--	.vidioc_qbuf			= vb2_ioctl_qbuf,
--	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
--	.vidioc_expbuf			= vb2_ioctl_expbuf,
--	.vidioc_streamon		= vb2_ioctl_streamon,
--	.vidioc_streamoff		= vb2_ioctl_streamoff,
--
--	.vidioc_log_status		= unicam_log_status,
--	.vidioc_subscribe_event		= unicam_subscribe_event,
--	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
--};
--
--static int
--unicam_async_bound(struct v4l2_async_notifier *notifier,
--		   struct v4l2_subdev *subdev,
--		   struct v4l2_async_subdev *asd)
--{
--	struct unicam_device *unicam = container_of(notifier->v4l2_dev,
--					       struct unicam_device, v4l2_dev);
--
--	if (unicam->sensor) {
--		unicam_info(unicam, "Rejecting subdev %s (Already set!!)",
--			    subdev->name);
--		return 0;
--	}
--
--	unicam->sensor = subdev;
--	unicam_dbg(1, unicam, "Using sensor %s for capture\n", subdev->name);
--
--	return 0;
--}
--
--static int register_node(struct unicam_device *unicam, struct unicam_node *node,
--			 enum v4l2_buf_type type, int pad_id)
--{
--	struct video_device *vdev;
--	struct vb2_queue *q;
--	struct v4l2_mbus_framefmt mbus_fmt = {0};
--	const struct unicam_fmt *fmt;
--	int ret;
--
--	if (unicam->sensor_embedded_data || pad_id != METADATA_PAD) {
--		ret = __subdev_get_format(unicam, &mbus_fmt, pad_id);
--		if (ret) {
--			unicam_err(unicam, "Failed to get_format - ret %d\n",
--				   ret);
--			return ret;
--		}
--
--		fmt = find_format_by_code(mbus_fmt.code);
--		if (!fmt) {
--			/* Find the first format that the sensor and unicam both
--			 * support
--			 */
--			fmt = get_first_supported_format(unicam);
--
--			if (!fmt)
--				/* No compatible formats */
--				return -EINVAL;
--
--			mbus_fmt.code = fmt->code;
--			ret = __subdev_set_format(unicam, &mbus_fmt, pad_id);
--			if (ret)
--				return -EINVAL;
--		}
--		if (mbus_fmt.field != V4L2_FIELD_NONE) {
--			/* Interlaced not supported - disable it now. */
--			mbus_fmt.field = V4L2_FIELD_NONE;
--			ret = __subdev_set_format(unicam, &mbus_fmt, pad_id);
--			if (ret)
--				return -EINVAL;
--		}
--	} else {
--		/* Fix this node format as embedded data. */
--		fmt = find_format_by_code(MEDIA_BUS_FMT_SENSOR_DATA);
--	}
--
--	node->dev = unicam;
--	node->pad_id = pad_id;
--	node->fmt = fmt;
--	if (fmt->fourcc) {
--		if (fmt->fourcc != V4L2_META_FMT_SENSOR_DATA)
--			node->v_fmt.fmt.pix.pixelformat = fmt->fourcc;
--		else
--			node->v_fmt.fmt.meta.dataformat = fmt->fourcc;
--	} else {
--		node->v_fmt.fmt.pix.pixelformat = fmt->repacked_fourcc;
--	}
--
--	/* Read current subdev format */
--	unicam_reset_format(node);
--
--	if (v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
--		v4l2_std_id tvnorms;
--
--		if (WARN_ON(!v4l2_subdev_has_op(unicam->sensor, video,
--						g_tvnorms)))
--			/*
--			 * Subdevice should not advertise s_std but not
--			 * g_tvnorms
--			 */
--			return -EINVAL;
--
--		ret = v4l2_subdev_call(unicam->sensor, video,
--				       g_tvnorms, &tvnorms);
--		if (WARN_ON(ret))
--			return -EINVAL;
--		node->video_dev.tvnorms |= tvnorms;
--	}
--
--	spin_lock_init(&node->dma_queue_lock);
--	mutex_init(&node->lock);
--
--	vdev = &node->video_dev;
--	if (pad_id == IMAGE_PAD) {
--		/* Add controls from the subdevice */
--		ret = v4l2_ctrl_add_handler(&node->ctrl_handler,
--					    unicam->sensor->ctrl_handler, NULL,
--					    true);
--		if (ret < 0)
--			return ret;
--
--		/*
--		 * If the sensor subdevice has any controls, associate the node
--		 *  with the ctrl handler to allow access from userland.
--		 */
--		if (!list_empty(&node->ctrl_handler.ctrls))
--			vdev->ctrl_handler = &node->ctrl_handler;
--	}
--
--	q = &node->buffer_queue;
--	q->type = type;
--	q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
--	q->drv_priv = node;
--	q->ops = &unicam_video_qops;
--	q->mem_ops = &vb2_dma_contig_memops;
--	q->buf_struct_size = sizeof(struct unicam_buffer);
--	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
--	q->lock = &node->lock;
--	q->min_buffers_needed = 1;
--	q->dev = &unicam->pdev->dev;
--
--	ret = vb2_queue_init(q);
--	if (ret) {
--		unicam_err(unicam, "vb2_queue_init() failed\n");
--		return ret;
--	}
--
--	INIT_LIST_HEAD(&node->dma_queue.active);
--
--	vdev->release = video_device_release_empty;
--	vdev->fops = &unicam_fops;
--	vdev->ioctl_ops = &unicam_ioctl_ops;
--	vdev->v4l2_dev = &unicam->v4l2_dev;
--	vdev->vfl_dir = VFL_DIR_RX;
--	vdev->queue = q;
--	vdev->lock = &node->lock;
--	vdev->device_caps = (pad_id == IMAGE_PAD) ?
--			    (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING) :
--			    (V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING);
--
--	/* Define the device names */
--	snprintf(vdev->name, sizeof(vdev->name), "%s-%s", UNICAM_MODULE_NAME,
--		 node->pad_id == IMAGE_PAD ? "image" : "embedded");
--
--	video_set_drvdata(vdev, node);
--	vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT;
--
--	node->dummy_buf_cpu_addr = dma_alloc_coherent(&unicam->pdev->dev,
--						      DUMMY_BUF_SIZE,
--						      &node->dummy_buf_dma_addr,
--						      GFP_ATOMIC);
--	if (!node->dummy_buf_cpu_addr) {
--		unicam_err(unicam, "Unable to allocate dummy buffer.\n");
--		return -ENOMEM;
--	}
--
--	if (node->pad_id == METADATA_PAD) {
--		v4l2_disable_ioctl(vdev, VIDIOC_DQEVENT);
--		v4l2_disable_ioctl(vdev, VIDIOC_SUBSCRIBE_EVENT);
--		v4l2_disable_ioctl(vdev, VIDIOC_UNSUBSCRIBE_EVENT);
--	}
--	if (node->pad_id == METADATA_PAD ||
--	    !v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_STD);
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_STD);
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUMSTD);
--	}
--	if (node->pad_id == METADATA_PAD ||
--	    !v4l2_subdev_has_op(unicam->sensor, video, querystd))
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_QUERYSTD);
--	if (node->pad_id == METADATA_PAD ||
--	    !v4l2_subdev_has_op(unicam->sensor, video, s_dv_timings)) {
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_EDID);
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_EDID);
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_DV_TIMINGS_CAP);
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_DV_TIMINGS);
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_DV_TIMINGS);
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUM_DV_TIMINGS);
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_QUERY_DV_TIMINGS);
--	}
--	if (node->pad_id == METADATA_PAD ||
--	    !v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_interval))
--		v4l2_disable_ioctl(&node->video_dev,
--				   VIDIOC_ENUM_FRAMEINTERVALS);
--	if (node->pad_id == METADATA_PAD ||
--	    !v4l2_subdev_has_op(unicam->sensor, video, g_frame_interval))
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_PARM);
--	if (node->pad_id == METADATA_PAD ||
--	    !v4l2_subdev_has_op(unicam->sensor, video, s_frame_interval))
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_PARM);
--
--	if (node->pad_id == METADATA_PAD ||
--	    !v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_size))
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUM_FRAMESIZES);
--
--	if (node->pad_id == METADATA_PAD ||
--	    !v4l2_subdev_has_op(unicam->sensor, pad, set_selection))
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_SELECTION);
--
--	if (node->pad_id == METADATA_PAD ||
--	    !v4l2_subdev_has_op(unicam->sensor, pad, get_selection))
--		v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_SELECTION);
--
--	ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
--	if (ret) {
--		unicam_err(unicam, "Unable to register video device.\n");
--		return ret;
--	}
--	node->registered = 1;
--
--	if (unicam->sensor_embedded_data) {
--		ret = media_create_pad_link(&unicam->sensor->entity, pad_id,
--					    &node->video_dev.entity, 0,
--					    MEDIA_LNK_FL_ENABLED |
--					    MEDIA_LNK_FL_IMMUTABLE);
--		if (ret)
--			unicam_err(unicam, "Unable to create pad links.\n");
--	}
--
--	return ret;
--}
--
--static void unregister_nodes(struct unicam_device *unicam)
--{
--	struct unicam_node *node;
--	int i;
--
--	for (i = 0; i < MAX_NODES; i++) {
--		node = &unicam->node[i];
--		if (node->dummy_buf_cpu_addr) {
--			dma_free_coherent(&unicam->pdev->dev, DUMMY_BUF_SIZE,
--					  node->dummy_buf_cpu_addr,
--					  node->dummy_buf_dma_addr);
--		}
--		if (node->registered) {
--			video_unregister_device(&node->video_dev);
--			node->registered = 0;
--		}
--	}
--}
--
--static int unicam_probe_complete(struct unicam_device *unicam)
--{
--	int ret;
--
--	v4l2_set_subdev_hostdata(unicam->sensor, unicam);
--
--	unicam->v4l2_dev.notify = unicam_notify;
--
--	unicam->sensor_config = v4l2_subdev_alloc_pad_config(unicam->sensor);
--	if (!unicam->sensor_config)
--		return -ENOMEM;
--
--	unicam->sensor_embedded_data = (unicam->sensor->entity.num_pads >= 2);
--
--	ret = register_node(unicam, &unicam->node[IMAGE_PAD],
--			    V4L2_BUF_TYPE_VIDEO_CAPTURE, IMAGE_PAD);
--	if (ret) {
--		unicam_err(unicam, "Unable to register subdev node 0.\n");
--		goto unregister;
--	}
--
--	ret = register_node(unicam, &unicam->node[METADATA_PAD],
--			    V4L2_BUF_TYPE_META_CAPTURE, METADATA_PAD);
--	if (ret) {
--		unicam_err(unicam, "Unable to register subdev node 1.\n");
--		goto unregister;
--	}
--
--	ret = v4l2_device_register_ro_subdev_nodes(&unicam->v4l2_dev);
--	if (ret) {
--		unicam_err(unicam, "Unable to register subdev nodes.\n");
--		goto unregister;
--	}
--
--	return 0;
--
--unregister:
--	unregister_nodes(unicam);
--
--	return ret;
--}
--
--static int unicam_async_complete(struct v4l2_async_notifier *notifier)
--{
--	struct unicam_device *unicam = container_of(notifier->v4l2_dev,
--					struct unicam_device, v4l2_dev);
--
--	return unicam_probe_complete(unicam);
--}
--
--static const struct v4l2_async_notifier_operations unicam_async_ops = {
--	.bound = unicam_async_bound,
--	.complete = unicam_async_complete,
--};
--
--static int of_unicam_connect_subdevs(struct unicam_device *dev)
--{
--	struct platform_device *pdev = dev->pdev;
--	struct device_node *parent, *ep_node = NULL, *remote_ep = NULL,
--			*sensor_node = NULL;
--	struct v4l2_fwnode_endpoint *ep;
--	struct v4l2_async_subdev *asd;
--	unsigned int peripheral_data_lanes;
--	int ret = -EINVAL;
--	unsigned int lane;
--
--	parent = pdev->dev.of_node;
--
--	asd = &dev->asd;
--	ep = &dev->endpoint;
--
--	ep_node = of_graph_get_next_endpoint(parent, NULL);
--	if (!ep_node) {
--		unicam_dbg(3, dev, "can't get next endpoint\n");
--		goto cleanup_exit;
--	}
--
--	unicam_dbg(3, dev, "ep_node is %s\n", ep_node->name);
--
--	v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), ep);
--
--	for (lane = 0; lane < ep->bus.mipi_csi2.num_data_lanes; lane++) {
--		if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) {
--			unicam_err(dev, "Local endpoint - data lane reordering not supported\n");
--			goto cleanup_exit;
--		}
--	}
--
--	peripheral_data_lanes = ep->bus.mipi_csi2.num_data_lanes;
--
--	sensor_node = of_graph_get_remote_port_parent(ep_node);
--	if (!sensor_node) {
--		unicam_dbg(3, dev, "can't get remote parent\n");
--		goto cleanup_exit;
--	}
--	unicam_dbg(3, dev, "sensor_node is %s\n", sensor_node->name);
--	asd->match_type = V4L2_ASYNC_MATCH_FWNODE;
--	asd->match.fwnode = of_fwnode_handle(sensor_node);
--
--	remote_ep = of_graph_get_remote_endpoint(ep_node);
--	if (!remote_ep) {
--		unicam_dbg(3, dev, "can't get remote-endpoint\n");
--		goto cleanup_exit;
--	}
--	unicam_dbg(3, dev, "remote_ep is %s\n", remote_ep->name);
--	v4l2_fwnode_endpoint_parse(of_fwnode_handle(remote_ep), ep);
--	unicam_dbg(3, dev, "parsed remote_ep to endpoint. nr_of_link_frequencies %u, bus_type %u\n",
--		   ep->nr_of_link_frequencies, ep->bus_type);
--
--	switch (ep->bus_type) {
--	case V4L2_MBUS_CSI2_DPHY:
--		if (ep->bus.mipi_csi2.num_data_lanes >
--				peripheral_data_lanes) {
--			unicam_err(dev, "Subdevice %s wants too many data lanes (%u > %u)\n",
--				   sensor_node->name,
--				   ep->bus.mipi_csi2.num_data_lanes,
--				   peripheral_data_lanes);
--			goto cleanup_exit;
--		}
--		for (lane = 0;
--		     lane < ep->bus.mipi_csi2.num_data_lanes;
--		     lane++) {
--			if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) {
--				unicam_err(dev, "Subdevice %s - incompatible data lane config\n",
--					   sensor_node->name);
--				goto cleanup_exit;
--			}
--		}
--		dev->max_data_lanes = ep->bus.mipi_csi2.num_data_lanes;
--		dev->bus_flags = ep->bus.mipi_csi2.flags;
--		break;
--	case V4L2_MBUS_CCP2:
--		if (ep->bus.mipi_csi1.clock_lane != 0 ||
--		    ep->bus.mipi_csi1.data_lane != 1) {
--			unicam_err(dev, "Subdevice %s incompatible lane config\n",
--				   sensor_node->name);
--			goto cleanup_exit;
--		}
--		dev->max_data_lanes = 1;
--		dev->bus_flags = ep->bus.mipi_csi1.strobe;
--		break;
--	default:
--		/* Unsupported bus type */
--		unicam_err(dev, "sub-device %s is not a CSI2 or CCP2 device %d\n",
--			   sensor_node->name, ep->bus_type);
--		goto cleanup_exit;
--	}
--
--	/* Store bus type - CSI2 or CCP2 */
--	dev->bus_type = ep->bus_type;
--	unicam_dbg(3, dev, "bus_type is %d\n", dev->bus_type);
--
--	/* Store Virtual Channel number */
--	dev->virtual_channel = ep->base.id;
--
--	unicam_dbg(3, dev, "v4l2-endpoint: %s\n",
--		   dev->bus_type == V4L2_MBUS_CSI2_DPHY ? "CSI2" : "CCP2");
--	unicam_dbg(3, dev, "Virtual Channel=%d\n", dev->virtual_channel);
--	if (dev->bus_type == V4L2_MBUS_CSI2_DPHY)
--		unicam_dbg(3, dev, "flags=0x%08x\n", ep->bus.mipi_csi2.flags);
--	unicam_dbg(3, dev, "num_data_lanes=%d\n", dev->max_data_lanes);
--
--	unicam_dbg(1, dev, "found sub-device %s\n", sensor_node->name);
--
--	v4l2_async_notifier_init(&dev->notifier);
--
--	ret = v4l2_async_notifier_add_subdev(&dev->notifier, asd);
--	if (ret) {
--		unicam_err(dev, "Error adding subdevice - ret %d\n", ret);
--		goto cleanup_exit;
--	}
--
--	dev->notifier.ops = &unicam_async_ops;
--	ret = v4l2_async_notifier_register(&dev->v4l2_dev,
--					   &dev->notifier);
--	if (ret) {
--		unicam_err(dev, "Error registering async notifier - ret %d\n",
--			   ret);
--		ret = -EINVAL;
--	}
--
--cleanup_exit:
--	if (remote_ep)
--		of_node_put(remote_ep);
--	if (sensor_node)
--		of_node_put(sensor_node);
--	if (ep_node)
--		of_node_put(ep_node);
--
--	return ret;
--}
--
--static int unicam_probe(struct platform_device *pdev)
--{
--	struct unicam_cfg *unicam_cfg;
--	struct unicam_device *unicam;
--	struct v4l2_ctrl_handler *hdl;
--	struct resource	*res;
--	int ret;
--
--	unicam = devm_kzalloc(&pdev->dev, sizeof(*unicam), GFP_KERNEL);
--	if (!unicam)
--		return -ENOMEM;
--
--	unicam->pdev = pdev;
--	unicam_cfg = &unicam->cfg;
--
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	unicam_cfg->base = devm_ioremap_resource(&pdev->dev, res);
--	if (IS_ERR(unicam_cfg->base)) {
--		unicam_err(unicam, "Failed to get main io block\n");
--		return PTR_ERR(unicam_cfg->base);
--	}
--
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
--	unicam_cfg->clk_gate_base = devm_ioremap_resource(&pdev->dev, res);
--	if (IS_ERR(unicam_cfg->clk_gate_base)) {
--		unicam_err(unicam, "Failed to get 2nd io block\n");
--		return PTR_ERR(unicam_cfg->clk_gate_base);
--	}
--
--	unicam->clock = devm_clk_get(&pdev->dev, "lp");
--	if (IS_ERR(unicam->clock)) {
--		unicam_err(unicam, "Failed to get clock\n");
--		return PTR_ERR(unicam->clock);
--	}
--
--	ret = platform_get_irq(pdev, 0);
--	if (ret <= 0) {
--		dev_err(&pdev->dev, "No IRQ resource\n");
--		return -ENODEV;
--	}
--
--	ret = devm_request_irq(&pdev->dev, ret, unicam_isr, 0,
--			       "unicam_capture0", unicam);
--	if (ret) {
--		dev_err(&pdev->dev, "Unable to request interrupt\n");
--		return -EINVAL;
--	}
--
--	unicam->mdev.dev = &pdev->dev;
--	strscpy(unicam->mdev.model, UNICAM_MODULE_NAME,
--		sizeof(unicam->mdev.model));
--	strscpy(unicam->mdev.serial, "", sizeof(unicam->mdev.serial));
--	snprintf(unicam->mdev.bus_info, sizeof(unicam->mdev.bus_info),
--		 "platform:%s %s",
--		 pdev->dev.driver->name, dev_name(&pdev->dev));
--	unicam->mdev.hw_revision = 1;
--
--	media_entity_pads_init(&unicam->node[IMAGE_PAD].video_dev.entity, 1,
--			       &unicam->node[IMAGE_PAD].pad);
--	media_entity_pads_init(&unicam->node[METADATA_PAD].video_dev.entity, 1,
--			       &unicam->node[METADATA_PAD].pad);
--	media_device_init(&unicam->mdev);
--
--	unicam->v4l2_dev.mdev = &unicam->mdev;
--
--	ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev);
--	if (ret) {
--		unicam_err(unicam,
--			   "Unable to register v4l2 device.\n");
--		goto media_cleanup;
--	}
--
--	ret = media_device_register(&unicam->mdev);
--	if (ret < 0) {
--		unicam_err(unicam,
--			   "Unable to register media-controller device.\n");
--		goto probe_out_v4l2_unregister;
--	}
--
--	/* Reserve space for the controls */
--	hdl = &unicam->node[IMAGE_PAD].ctrl_handler;
--	ret = v4l2_ctrl_handler_init(hdl, 16);
--	if (ret < 0)
--		goto media_unregister;
--
--	/* set the driver data in platform device */
--	platform_set_drvdata(pdev, unicam);
--
--	ret = of_unicam_connect_subdevs(unicam);
--	if (ret) {
--		dev_err(&pdev->dev, "Failed to connect subdevs\n");
--		goto free_hdl;
--	}
--
--	/* Enable the block power domain */
--	pm_runtime_enable(&pdev->dev);
--
--	return 0;
--
--free_hdl:
--	v4l2_ctrl_handler_free(hdl);
--media_unregister:
--	media_device_unregister(&unicam->mdev);
--probe_out_v4l2_unregister:
--	v4l2_device_unregister(&unicam->v4l2_dev);
--media_cleanup:
--	media_device_cleanup(&unicam->mdev);
--
--	return ret;
--}
--
--static int unicam_remove(struct platform_device *pdev)
--{
--	struct unicam_device *unicam = platform_get_drvdata(pdev);
--
--	unicam_dbg(2, unicam, "%s\n", __func__);
--
--	pm_runtime_disable(&pdev->dev);
--
--	v4l2_async_notifier_unregister(&unicam->notifier);
--	v4l2_ctrl_handler_free(&unicam->node[IMAGE_PAD].ctrl_handler);
--	v4l2_device_unregister(&unicam->v4l2_dev);
--	unregister_nodes(unicam);
--	if (unicam->sensor_config)
--		v4l2_subdev_free_pad_config(unicam->sensor_config);
--	media_device_unregister(&unicam->mdev);
--	media_device_cleanup(&unicam->mdev);
--
--	return 0;
--}
--
--static const struct of_device_id unicam_of_match[] = {
--	{ .compatible = "brcm,bcm2835-unicam", },
--	{ /* sentinel */ },
--};
--MODULE_DEVICE_TABLE(of, unicam_of_match);
--
--static struct platform_driver unicam_driver = {
--	.probe		= unicam_probe,
--	.remove		= unicam_remove,
--	.driver = {
--		.name	= UNICAM_MODULE_NAME,
--		.of_match_table = of_match_ptr(unicam_of_match),
--	},
--};
--
--module_platform_driver(unicam_driver);
--
--MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.com>");
--MODULE_DESCRIPTION("BCM2835 Unicam driver");
--MODULE_LICENSE("GPL");
--MODULE_VERSION(UNICAM_VERSION);
---- a/drivers/media/platform/bcm2835/vc4-regs-unicam.h
-+++ /dev/null
-@@ -1,253 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0-only */
--
--/*
-- * Copyright (C) 2017-2020 Raspberry Pi Trading.
-- * Dave Stevenson <dave.stevenson@raspberrypi.com>
-- */
--
--#ifndef VC4_REGS_UNICAM_H
--#define VC4_REGS_UNICAM_H
--
--/*
-- * The following values are taken from files found within the code drop
-- * made by Broadcom for the BCM21553 Graphics Driver, predominantly in
-- * brcm_usrlib/dag/vmcsx/vcinclude/hardware_vc4.h.
-- * They have been modified to be only the register offset.
-- */
--#define UNICAM_CTRL	0x000
--#define UNICAM_STA	0x004
--#define UNICAM_ANA	0x008
--#define UNICAM_PRI	0x00c
--#define UNICAM_CLK	0x010
--#define UNICAM_CLT	0x014
--#define UNICAM_DAT0	0x018
--#define UNICAM_DAT1	0x01c
--#define UNICAM_DAT2	0x020
--#define UNICAM_DAT3	0x024
--#define UNICAM_DLT	0x028
--#define UNICAM_CMP0	0x02c
--#define UNICAM_CMP1	0x030
--#define UNICAM_CAP0	0x034
--#define UNICAM_CAP1	0x038
--#define UNICAM_ICTL	0x100
--#define UNICAM_ISTA	0x104
--#define UNICAM_IDI0	0x108
--#define UNICAM_IPIPE	0x10c
--#define UNICAM_IBSA0	0x110
--#define UNICAM_IBEA0	0x114
--#define UNICAM_IBLS	0x118
--#define UNICAM_IBWP	0x11c
--#define UNICAM_IHWIN	0x120
--#define UNICAM_IHSTA	0x124
--#define UNICAM_IVWIN	0x128
--#define UNICAM_IVSTA	0x12c
--#define UNICAM_ICC	0x130
--#define UNICAM_ICS	0x134
--#define UNICAM_IDC	0x138
--#define UNICAM_IDPO	0x13c
--#define UNICAM_IDCA	0x140
--#define UNICAM_IDCD	0x144
--#define UNICAM_IDS	0x148
--#define UNICAM_DCS	0x200
--#define UNICAM_DBSA0	0x204
--#define UNICAM_DBEA0	0x208
--#define UNICAM_DBWP	0x20c
--#define UNICAM_DBCTL	0x300
--#define UNICAM_IBSA1	0x304
--#define UNICAM_IBEA1	0x308
--#define UNICAM_IDI1	0x30c
--#define UNICAM_DBSA1	0x310
--#define UNICAM_DBEA1	0x314
--#define UNICAM_MISC	0x400
--
--/*
-- * The following bitmasks are from the kernel released by Broadcom
-- * for Android - https://android.googlesource.com/kernel/bcm/
-- * The Rhea, Hawaii, and Java chips all contain the same VideoCore4
-- * Unicam block as BCM2835, as defined in eg
-- * arch/arm/mach-rhea/include/mach/rdb_A0/brcm_rdb_cam.h and similar.
-- * Values reworked to use the kernel BIT and GENMASK macros.
-- *
-- * Some of the bit mnenomics have been amended to match the datasheet.
-- */
--/* UNICAM_CTRL Register */
--#define UNICAM_CPE		BIT(0)
--#define UNICAM_MEM		BIT(1)
--#define UNICAM_CPR		BIT(2)
--#define UNICAM_CPM_MASK		GENMASK(3, 3)
--#define UNICAM_CPM_CSI2		0
--#define UNICAM_CPM_CCP2		1
--#define UNICAM_SOE		BIT(4)
--#define UNICAM_DCM_MASK		GENMASK(5, 5)
--#define UNICAM_DCM_STROBE	0
--#define UNICAM_DCM_DATA		1
--#define UNICAM_SLS		BIT(6)
--#define UNICAM_PFT_MASK		GENMASK(11, 8)
--#define UNICAM_OET_MASK		GENMASK(20, 12)
--
--/* UNICAM_STA Register */
--#define UNICAM_SYN		BIT(0)
--#define UNICAM_CS		BIT(1)
--#define UNICAM_SBE		BIT(2)
--#define UNICAM_PBE		BIT(3)
--#define UNICAM_HOE		BIT(4)
--#define UNICAM_PLE		BIT(5)
--#define UNICAM_SSC		BIT(6)
--#define UNICAM_CRCE		BIT(7)
--#define UNICAM_OES		BIT(8)
--#define UNICAM_IFO		BIT(9)
--#define UNICAM_OFO		BIT(10)
--#define UNICAM_BFO		BIT(11)
--#define UNICAM_DL		BIT(12)
--#define UNICAM_PS		BIT(13)
--#define UNICAM_IS		BIT(14)
--#define UNICAM_PI0		BIT(15)
--#define UNICAM_PI1		BIT(16)
--#define UNICAM_FSI_S		BIT(17)
--#define UNICAM_FEI_S		BIT(18)
--#define UNICAM_LCI_S		BIT(19)
--#define UNICAM_BUF0_RDY		BIT(20)
--#define UNICAM_BUF0_NO		BIT(21)
--#define UNICAM_BUF1_RDY		BIT(22)
--#define UNICAM_BUF1_NO		BIT(23)
--#define UNICAM_DI		BIT(24)
--
--#define UNICAM_STA_MASK_ALL \
--		(UNICAM_DL + \
--		UNICAM_SBE + \
--		UNICAM_PBE + \
--		UNICAM_HOE + \
--		UNICAM_PLE + \
--		UNICAM_SSC + \
--		UNICAM_CRCE + \
--		UNICAM_IFO + \
--		UNICAM_OFO + \
--		UNICAM_PS + \
--		UNICAM_PI0 + \
--		UNICAM_PI1)
--
--/* UNICAM_ANA Register */
--#define UNICAM_APD		BIT(0)
--#define UNICAM_BPD		BIT(1)
--#define UNICAM_AR		BIT(2)
--#define UNICAM_DDL		BIT(3)
--#define UNICAM_CTATADJ_MASK	GENMASK(7, 4)
--#define UNICAM_PTATADJ_MASK	GENMASK(11, 8)
--
--/* UNICAM_PRI Register */
--#define UNICAM_PE		BIT(0)
--#define UNICAM_PT_MASK		GENMASK(2, 1)
--#define UNICAM_NP_MASK		GENMASK(7, 4)
--#define UNICAM_PP_MASK		GENMASK(11, 8)
--#define UNICAM_BS_MASK		GENMASK(15, 12)
--#define UNICAM_BL_MASK		GENMASK(17, 16)
--
--/* UNICAM_CLK Register */
--#define UNICAM_CLE		BIT(0)
--#define UNICAM_CLPD		BIT(1)
--#define UNICAM_CLLPE		BIT(2)
--#define UNICAM_CLHSE		BIT(3)
--#define UNICAM_CLTRE		BIT(4)
--#define UNICAM_CLAC_MASK	GENMASK(8, 5)
--#define UNICAM_CLSTE		BIT(29)
--
--/* UNICAM_CLT Register */
--#define UNICAM_CLT1_MASK	GENMASK(7, 0)
--#define UNICAM_CLT2_MASK	GENMASK(15, 8)
--
--/* UNICAM_DATn Registers */
--#define UNICAM_DLE		BIT(0)
--#define UNICAM_DLPD		BIT(1)
--#define UNICAM_DLLPE		BIT(2)
--#define UNICAM_DLHSE		BIT(3)
--#define UNICAM_DLTRE		BIT(4)
--#define UNICAM_DLSM		BIT(5)
--#define UNICAM_DLFO		BIT(28)
--#define UNICAM_DLSTE		BIT(29)
--
--#define UNICAM_DAT_MASK_ALL (UNICAM_DLSTE + UNICAM_DLFO)
--
--/* UNICAM_DLT Register */
--#define UNICAM_DLT1_MASK	GENMASK(7, 0)
--#define UNICAM_DLT2_MASK	GENMASK(15, 8)
--#define UNICAM_DLT3_MASK	GENMASK(23, 16)
--
--/* UNICAM_ICTL Register */
--#define UNICAM_FSIE		BIT(0)
--#define UNICAM_FEIE		BIT(1)
--#define UNICAM_IBOB		BIT(2)
--#define UNICAM_FCM		BIT(3)
--#define UNICAM_TFC		BIT(4)
--#define UNICAM_LIP_MASK		GENMASK(6, 5)
--#define UNICAM_LCIE_MASK	GENMASK(28, 16)
--
--/* UNICAM_IDI0/1 Register */
--#define UNICAM_ID0_MASK		GENMASK(7, 0)
--#define UNICAM_ID1_MASK		GENMASK(15, 8)
--#define UNICAM_ID2_MASK		GENMASK(23, 16)
--#define UNICAM_ID3_MASK		GENMASK(31, 24)
--
--/* UNICAM_ISTA Register */
--#define UNICAM_FSI		BIT(0)
--#define UNICAM_FEI		BIT(1)
--#define UNICAM_LCI		BIT(2)
--
--#define UNICAM_ISTA_MASK_ALL (UNICAM_FSI + UNICAM_FEI + UNICAM_LCI)
--
--/* UNICAM_IPIPE Register */
--#define UNICAM_PUM_MASK		GENMASK(2, 0)
--		/* Unpacking modes */
--		#define UNICAM_PUM_NONE		0
--		#define UNICAM_PUM_UNPACK6	1
--		#define UNICAM_PUM_UNPACK7	2
--		#define UNICAM_PUM_UNPACK8	3
--		#define UNICAM_PUM_UNPACK10	4
--		#define UNICAM_PUM_UNPACK12	5
--		#define UNICAM_PUM_UNPACK14	6
--		#define UNICAM_PUM_UNPACK16	7
--#define UNICAM_DDM_MASK		GENMASK(6, 3)
--#define UNICAM_PPM_MASK		GENMASK(9, 7)
--		/* Packing modes */
--		#define UNICAM_PPM_NONE		0
--		#define UNICAM_PPM_PACK8	1
--		#define UNICAM_PPM_PACK10	2
--		#define UNICAM_PPM_PACK12	3
--		#define UNICAM_PPM_PACK14	4
--		#define UNICAM_PPM_PACK16	5
--#define UNICAM_DEM_MASK		GENMASK(11, 10)
--#define UNICAM_DEBL_MASK	GENMASK(14, 12)
--#define UNICAM_ICM_MASK		GENMASK(16, 15)
--#define UNICAM_IDM_MASK		GENMASK(17, 17)
--
--/* UNICAM_ICC Register */
--#define UNICAM_ICFL_MASK	GENMASK(4, 0)
--#define UNICAM_ICFH_MASK	GENMASK(9, 5)
--#define UNICAM_ICST_MASK	GENMASK(12, 10)
--#define UNICAM_ICLT_MASK	GENMASK(15, 13)
--#define UNICAM_ICLL_MASK	GENMASK(31, 16)
--
--/* UNICAM_DCS Register */
--#define UNICAM_DIE		BIT(0)
--#define UNICAM_DIM		BIT(1)
--#define UNICAM_DBOB		BIT(3)
--#define UNICAM_FDE		BIT(4)
--#define UNICAM_LDP		BIT(5)
--#define UNICAM_EDL_MASK		GENMASK(15, 8)
--
--/* UNICAM_DBCTL Register */
--#define UNICAM_DBEN		BIT(0)
--#define UNICAM_BUF0_IE		BIT(1)
--#define UNICAM_BUF1_IE		BIT(2)
--
--/* UNICAM_CMP[0,1] register */
--#define UNICAM_PCE		BIT(31)
--#define UNICAM_GI		BIT(9)
--#define UNICAM_CPH		BIT(8)
--#define UNICAM_PCVC_MASK	GENMASK(7, 6)
--#define UNICAM_PCDT_MASK	GENMASK(5, 0)
--
--/* UNICAM_MISC register */
--#define UNICAM_FL0		BIT(6)
--#define UNICAM_FL1		BIT(9)
--
--#endif