bcm27xx: add support for linux v5.15

Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 31 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-5.15/950-0145-net-genet-enable-link-energy-detect-powerdown-for-ex.patch b/target/linux/bcm27xx/patches-5.15/950-0145-net-genet-enable-link-energy-detect-powerdown-for-ex.patch
new file mode 100644
index 0000000000..f817fbc2b2
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.15/950-0145-net-genet-enable-link-energy-detect-powerdown-for-ex.patch
@@ -0,0 +1,31 @@
+From d63ea0cc6bfa438fd1a3ef7c336a3418e2b7b22b Mon Sep 17 00:00:00 2001
+From: Jonathan Bell <jonathan@raspberrypi.org>
+Date: Tue, 14 May 2019 17:17:59 +0100
+Subject: [PATCH] net: genet: enable link energy detect powerdown for
+ external PHYs
+
+There are several warts surrounding bcmgenet_mii_probe() as this
+function is called from ndo_open, but it's calling registration-type
+functions. The probe should be called at probe time and refactored
+such that the PHY device data can be extracted to limit the scope
+of this flag to Broadcom PHYs.
+
+For now, pass this flag in as it puts our attached PHY into a low-power
+state when disconnected.
+
+Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
+---
+ drivers/net/ethernet/broadcom/genet/bcmmii.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
++++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
+@@ -293,6 +293,8 @@ int bcmgenet_mii_probe(struct net_device
+ 	/* Communicate the integrated PHY revision */
+ 	if (priv->internal_phy)
+ 		phy_flags = priv->gphy_rev;
++	else
++		phy_flags = PHY_BRCM_AUTO_PWRDWN_ENABLE;
+ 
+ 	/* Initialize link state variables that bcmgenet_mii_setup() uses */
+ 	priv->old_link = -1;