bcm27xx: add kernel 5.10 support

Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 130 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-5.10/950-0244-dt-bindings-media-i2c-Add-IMX477-CMOS-sensor-binding.patch b/target/linux/bcm27xx/patches-5.10/950-0244-dt-bindings-media-i2c-Add-IMX477-CMOS-sensor-binding.patch
new file mode 100644
index 0000000000..0326c85515
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.10/950-0244-dt-bindings-media-i2c-Add-IMX477-CMOS-sensor-binding.patch
@@ -0,0 +1,130 @@
+From f312f497a22b3a69640d628277f5c56238860bc3 Mon Sep 17 00:00:00 2001
+From: Naushir Patuck <naush@raspberrypi.com>
+Date: Thu, 7 May 2020 15:50:54 +0100
+Subject: [PATCH] dt-bindings: media: i2c: Add IMX477 CMOS sensor
+ binding
+
+Add YAML device tree binding for IMX477 CMOS image sensor.
+
+Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
+---
+ .../devicetree/bindings/media/i2c/imx477.yaml | 113 ++++++++++++++++++
+ 1 file changed, 113 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/media/i2c/imx477.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/media/i2c/imx477.yaml
+@@ -0,0 +1,113 @@
++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/media/i2c/imx477.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Sony 1/2.3-Inch 12Mpixel CMOS Digital Image Sensor
++
++maintainers:
++  - Naushir Patuck <naush@raspberypi.com>
++
++description: |-
++  The Sony IMX477 is a 1/2.3-inch CMOS active pixel digital image sensor
++  with an active array size of 4056H x 3040V. It is programmable through
++  I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
++  Image data is sent through MIPI CSI-2, which is configured as either 2 or
++  4 data lanes.
++
++properties:
++  compatible:
++    const: sony,imx477
++
++  reg:
++    description: I2C device address
++    maxItems: 1
++
++  clocks:
++    maxItems: 1
++
++  VDIG-supply:
++    description:
++      Digital I/O voltage supply, 1.05 volts
++
++  VANA-supply:
++    description:
++      Analog voltage supply, 2.8 volts
++
++  VDDL-supply:
++    description:
++      Digital core voltage supply, 1.8 volts
++
++  reset-gpios:
++    description: |-
++      Reference to the GPIO connected to the xclr pin, if any.
++      Must be released (set high) after all all supplies and INCK are applied.
++
++  # See ../video-interfaces.txt for more details
++  port:
++    type: object
++    properties:
++      endpoint:
++        type: object
++        properties:
++          data-lanes:
++            description: |-
++              The sensor supports either two-lane, or four-lane operation.
++              For two-lane operation the property must be set to <1 2>.
++            items:
++              - const: 1
++              - const: 2
++
++          clock-noncontinuous:
++            type: boolean
++            description: |-
++              MIPI CSI-2 clock is non-continuous if this property is present,
++              otherwise it's continuous.
++
++          link-frequencies:
++            allOf:
++              - $ref: /schemas/types.yaml#/definitions/uint64-array
++            description:
++              Allowed data bus frequencies.
++
++        required:
++          - link-frequencies
++
++required:
++  - compatible
++  - reg
++  - clocks
++  - VANA-supply
++  - VDIG-supply
++  - VDDL-supply
++  - port
++
++additionalProperties: false
++
++examples:
++  - |
++    i2c0 {
++        #address-cells = <1>;
++        #size-cells = <0>;
++
++        imx477: sensor@10 {
++            compatible = "sony,imx477";
++            reg = <0x1a>;
++            clocks = <&imx477_clk>;
++            VANA-supply = <&imx477_vana>;   /* 2.8v */
++            VDIG-supply = <&imx477_vdig>;   /* 1.05v */
++            VDDL-supply = <&imx477_vddl>;   /* 1.8v */
++
++            port {
++                imx477_0: endpoint {
++                    remote-endpoint = <&csi1_ep>;
++                    data-lanes = <1 2>;
++                    clock-noncontinuous;
++                    link-frequencies = /bits/ 64 <450000000>;
++                };
++            };
++        };
++    };
++
++...