diff options
author | Jan-Niklas Burfeind <git@aiyionpri.me> | 2021-08-27 19:25:47 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2021-09-01 00:20:08 +0200 |
commit | 5cc05358006d592d3712e6565c253762819fe010 (patch) | |
tree | f2953604a791e9f3ba7907c2ed8343e0c70a32f0 /target/linux/ath79 | |
parent | 085c67762ddac7133b47c6e3825d944c41a5e174 (diff) | |
download | upstream-5cc05358006d592d3712e6565c253762819fe010.tar.gz upstream-5cc05358006d592d3712e6565c253762819fe010.tar.bz2 upstream-5cc05358006d592d3712e6565c253762819fe010.zip |
ath79: add support for onion omega
The Onion Omega is a hardware development platform with built-in WiFi.
https://onioniot.github.io/wiki/
Specifications:
- QCA9331 @ 400 MHz (MIPS 24Kc Big-Endian Processor)
- 64MB of DDR2 RAM running at 400 MHz
- 16MB of on-board flash storage
- Support for USB 2.0
- Support for Ethernet at 100 Mbps
- 802.11b/g/n WiFi at 150 Mbps
- 18 digital GPIOs
- A single Serial UART
- Support for SPI
- Support for I2S
Flash instructions:
The device is running OpenWrt upon release using the ar71xx target.
Both a sysupgrade
and uploading the factory image using u-boots web-UI do work fine.
Depending on the ssh client, it might be necessary to enable outdated
KeyExchange methods e.g. in the clients ssh-config:
Host 192.168.1.1
KexAlgorithms +diffie-hellman-group1-sha1
The stock credentials are: root onioneer
For u-boots web-UI manually configure `192.168.1.2/24` on your computer,
connect to `192.168.1.1`.
MAC addresses as verified by OEM firmware:
2G phy0 label
LAN eth0 label - 1
LAN is only available in combination with an optional expansion dock.
Based on vendor acked commit:
commit 5cd49bb067ca ("ar71xx: add support for Onion Omega")
Partly reverts:
commit fc553c7e4c8e ("ath79: drop unused/incomplete dts")
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
(cherry picked from commit d98738b5c118fc45068b45f07b8b6938e91f35d2)
Diffstat (limited to 'target/linux/ath79')
-rw-r--r-- | target/linux/ath79/dts/ar9331_onion_omega.dts | 125 | ||||
-rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/02_network | 1 | ||||
-rw-r--r-- | target/linux/ath79/image/generic.mk | 13 |
3 files changed, 139 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_onion_omega.dts b/target/linux/ath79/dts/ar9331_onion_omega.dts new file mode 100644 index 0000000000..4039b9e203 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_onion_omega.dts @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9331.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Onion Omega"; + compatible = "onion,omega", "qca,ar9331"; + + aliases { + serial0 = &uart; + label-mac-device = &wmac; + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "amber:system"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + }; + + reg_usb_vbus: reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ref { + clock-frequency = <25000000>; +}; + +&usb { + status = "okay"; + + vbus-supply = <®_usb_vbus>; + dr_mode = "host"; +}; + +&usb_phy { + status = "okay"; +}; + +ð0 { + status = "okay"; + + compatible = "syscon", "simple-mfd"; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <(-1)>; + + gmac-config { + device = <&gmac>; + switch-phy-addr-swap = <4>; + switch-phy-swap = <4>; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <25000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x020000 0xfd0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + + mtd-mac-address = <&uboot 0x1fc00>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 31c0f11861..c4d9d76941 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -46,6 +46,7 @@ ath79_setup_interfaces() netgear,ex7300|\ ocedo,koala|\ ocedo,raccoon|\ + onion,omega|\ openmesh,mr600-v1|\ openmesh,mr600-v2|\ openmesh,mr900-v1|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index ce4e462a40..5ba64b9803 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1603,6 +1603,19 @@ define Device/ocedo_ursus endef TARGET_DEVICES += ocedo_ursus +define Device/onion_omega + $(Device/tplink-16mlzma) + SOC := ar9331 + DEVICE_VENDOR := Onion + DEVICE_MODEL := Omega + DEVICE_PACKAGES := kmod-usb-chipidea2 + SUPPORTED_DEVICES += onion-omega + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma + IMAGE_SIZE := 16192k + TPLINK_HWID := 0x04700001 +endef +TARGET_DEVICES += onion_omega + define Device/openmesh_common_64k DEVICE_VENDOR := OpenMesh DEVICE_PACKAGES := uboot-envtools |