ath79: cleanup DTS for ALLNET ALL-WAP02860AC

use qca955x_senao_loader.dtsi
because it is the same hardware / partitioning
and some cleanup

Effects:

nodes to match similar boards
 - keys
 - eth0
 - pcie0

bumps SPI frequency to 40 MHz

removes &pll node:
the property is defined in qca955x.dtsi

removes qca,no-eeprom:
has no effect with mtd-cal-data property
(also spelling)

Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit e800da9d5c87d276806284cf2183994ea7fe083e)

1 files changed, 17 insertions, 92 deletions

diff --git a/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts b/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
index 3afbc04ddf..5c6051d6f4 100644
--- a/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
+++ b/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
@@ -1,14 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca955x.dtsi"
+#include "qca955x_senao_loader.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
-	model = "ALLNET ALL-WAP02860AC";
 	compatible = "allnet,all-wap02860ac", "qca,qca9558";
+	model = "ALLNET ALL-WAP02860AC";
 
 	aliases {
 		label-mac-device = &eth0;
@@ -23,8 +22,9 @@
 
 		reset {
 			label = "reset";
-			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+			linux,code = <KEY_RESTART>;
 		};
 	};
 
@@ -54,35 +54,17 @@
 			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	virtual_flash {
-		compatible = "mtd-concat";
-
-		devices = <&fwconcat0 &fwconcat1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <0x73714f4b>;
-				label = "firmware";
-				reg = <0x0 0x0>;
-			};
-		};
-	};
 };
 
 &eth0 {
 	status = "okay";
 
-	pll-data = <0x8e000000 0x80000101 0x80001313>;
+	mtd-mac-address = <&art 0x0>;
+
 	phy-handle = <&phy5>;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 
-	mtd-mac-address = <&art 0x0>;
+	pll-data = <0x82000000 0x80000101 0x80001313>;
 };
 
 &mdio0 {
@@ -95,76 +77,20 @@
 	};
 };
 
-&pcie0 {
-	status = "okay";
-
-	wifi@0,0 {
-		compatible = "qcom,ath10k";
-		reg = <0 0 0 0 0>;
+&partitions {
+	art: partition@ff0000 {
+		label = "art";
+		reg = <0xff0000 0x010000>;
+		read-only;
 	};
 };
 
-&pll {
-	clocks = <&extosc>;
-};
-
-&spi {
+&pcie0 {
 	status = "okay";
 
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x000000 0x040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "u-boot-env";
-				reg = <0x040000 0x010000>;
-			};
-
-			partition@50000 {
-				label = "custom";
-				reg = <0x050000 0x050000>;
-				read-only;
-			};
-
-			partition@a0000 {
-				label = "loader";
-				reg = <0x0a0000 0x010000>;
-			};
-
-			fwconcat1: partition@b0000 {
-				label = "fwconcat1";
-				reg = <0x0b0000 0x170000>;
-			};
-
-			fwconcat0: partition@220000 {
-				label = "fwconcat0";
-				reg = <0x220000 0xb50000>;
-			};
-
-			partition@d70000 {
-				label = "failsafe";
-				reg = <0xd70000 0x280000>;
-				read-only;
-			};
-
-			art: partition@ff0000 {
-				label = "art";
-				reg = <0xff0000 0x010000>;
-				read-only;
-			};
-		};
+	wifi@0,0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0x0 0 0 0 0>;
 	};
 };
 
@@ -174,5 +100,4 @@
 	mtd-cal-data = <&art 0x1000>;
 	mtd-mac-address = <&art 0x0>;
 	mtd-mac-address-increment = <1>;
-	qca-no-eeprom;
 };