diff options
| author | Michał Kępień <openwrt@kempniu.pl> | 2023-06-17 19:12:21 +0200 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-07-12 20:45:43 +0200 |
| commit | 98b397d4fb56a7049eeda00ff138f439db32dcef (patch) | |
| tree | ac5a192d8a7051656ba9f4c775ad59df1c93ff82 /target/linux/ath79/mikrotik | |
| parent | 7bb616d3006e5efc7474e552e861bfece453fa70 (diff) | |
| download | upstream-98b397d4fb56a7049eeda00ff138f439db32dcef.tar.gz upstream-98b397d4fb56a7049eeda00ff138f439db32dcef.tar.bz2 upstream-98b397d4fb56a7049eeda00ff138f439db32dcef.zip | |
ath79: add support for MikroTik RB951G-2HnD
MikroTik RB951G-2HnD is a wireless SOHO router that was previously
supported by the ar71xx target, see commit 7a709573d7 ("ar71xx: add
kernel support for the Mikrotik RB951G board").
Specifications
--------------
- SoC: Atheros AR9344 (600 MHz)
- RAM: 128 MB (2x 64 MB)
- Storage: 128 MB NAND flash (various manufacturers)
- Ethernet: Atheros AR8327 switch, 5x 10/100/1000 Mbit/s
- 1x PoE in (port 1, 8-30 V input)
- Wireless: Atheros AR9340 (802.11b/g/n)
- USB: 2.0 (1A)
- 8x LED:
- 1x power (green, not configurable)
- 1x user (green, not configurable)
- 5x GE ports (green, not configurable)
- 1x wireless (green, not configurable)
- 1x button (restart)
Unlike on the RB951Ui-2HnD, none of the LEDs on this device seem to be
GPIO-controllable, which was also the case for older OpenWRT versions
that supported this board via a mach file. The Ethernet port LEDs are
controlled by the switch chip.
See https://mikrotik.com/product/RB951G-2HnD for more details.
Flashing
--------
TFTP boot initramfs image and then perform sysupgrade. Follow
common MikroTik procedures at https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
(cherry picked from commit db02cecd6ad2e5962e6e9d8307da34855a083ad6)
Diffstat (limited to 'target/linux/ath79/mikrotik')
3 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index aba811fb2d..68c8cfb96e 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -35,6 +35,7 @@ ath79_setup_interfaces() mikrotik,routerboard-map-2nd) ucidef_set_interface_lan "eth0 eth1" ;; + mikrotik,routerboard-951g-2hnd|\ mikrotik,routerboard-962uigs-5hact2hnt) ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index b23bd05bcd..cc05ba080b 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -46,6 +46,7 @@ case "$FIRMWARE" in mikrotik,routerboard-962uigs-5hact2hnt) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 7) ;; + mikrotik,routerboard-951g-2hnd|\ mikrotik,routerboard-951ui-2hnd) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +11) ;; diff --git a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh index cefbc5d334..e3887bfc50 100644 --- a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh @@ -33,6 +33,7 @@ platform_do_upgrade() { mikrotik,routerboard-912uag-2hpnd|\ mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-922uags-5hpacd|\ + mikrotik,routerboard-951g-2hnd|\ mikrotik,routerboard-951ui-2hnd|\ mikrotik,routerboard-sxt-5nd-r2) platform_do_upgrade_mikrotik_nand "$1" |