diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-12-08 15:18:17 +0900 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2018-12-24 19:18:07 +0100 |
| commit | c566439c9bf3cf2b4e5e5a059332c64199d97611 (patch) | |
| tree | 88e55e4b1cbf4911e29df8e7ad31e341882d7aae /target/linux/ath79/image | |
| parent | 99df98442e1101607e3e6c902d5d957e72cea1d6 (diff) | |
| download | upstream-c566439c9bf3cf2b4e5e5a059332c64199d97611.tar.gz upstream-c566439c9bf3cf2b4e5e5a059332c64199d97611.tar.bz2 upstream-c566439c9bf3cf2b4e5e5a059332c64199d97611.zip | |
ath79: add support for NEC Aterm WG800HP
NEC Aterm WG800HP is a 2.4/5 GHz band 11ac router, based on Qualcomm
Atheros QCA9563.
Specification:
- Qualcomm Atheros QCA9563
- 64 MB of RAM (DDR2)
- 8 MB of Flash (SPI-NOR)
- 2.4/5 GHz wifi
- 2.4 GHz: 2T2R (SoC internal)
- 5 GHz: 1T1R (QCA9887)
- 4x 10/100/1000 Mbps Ethernet
- 8x LEDs, 3x keys (2x buttons, 1x slide-switch)
- UART through-hole on PCB (J2)
- Vcc, GND, NC, TX, RX from SoC side
- 115200n8
Flash instruction using factory image:
1. Connect the computer to the LAN port on WG800HP
2. Connect power cable to WG800HP and turn on it
3. Access to "http://192.168.10.1/" and open firmware update page
("ファームウェア更新")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/image')
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index c6cecc20d3..badfa7cbab 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -43,6 +43,16 @@ define Build/elecom-header endef +define Build/nec-fw + ( stat -c%s $@ | tr -d "\n" | dd bs=16 count=1 conv=sync; ) >> $@ + ( \ + echo -n -e "$(1)" | dd bs=16 count=1 conv=sync; \ + echo -n "0.0.00" | dd bs=16 count=1 conv=sync; \ + dd if=$@; \ + ) > $@.new + mv $@.new $@ +endef + define Device/avm_fritz300e ATH_SOC := ar7242 DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E @@ -262,6 +272,19 @@ define Device/iodata_wn-ag300dgr endef TARGET_DEVICES += iodata_wn-ag300dgr +define Device/nec_wg800hp + ATH_SOC := qca9563 + DEVICE_TITLE := NEC Aterm WG800HP + IMAGE_SIZE := 7104k + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \ + xor-image -p 6A57190601121E4C004C1E1201061957 -x | \ + nec-fw LASER_ATERM + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct-htt +endef +TARGET_DEVICES += nec_wg800hp + define Device/ocedo_koala ATH_SOC := qca9558 DEVICE_TITLE := OCEDO Koala |