diff options
| author | David Bauer <mail@david-bauer.net> | 2019-06-11 17:27:51 +0200 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2019-07-21 13:09:45 +0200 |
| commit | 5cd9b50d69cb42d55b9cc466b749b41d1da465de (patch) | |
| tree | e6be050a234abb4b68213b4a91852f69bb0ddf0e /target/linux/ath79/image | |
| parent | 76a4c93f9dcafc0efd6f825fbd40eb4a2e53d456 (diff) | |
| download | upstream-5cd9b50d69cb42d55b9cc466b749b41d1da465de.tar.gz upstream-5cd9b50d69cb42d55b9cc466b749b41d1da465de.tar.bz2 upstream-5cd9b50d69cb42d55b9cc466b749b41d1da465de.zip | |
ath79: add support for devolo WiFi pro 1750x
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 3T3R
WiFi5: QCA9880 3T3R
BTN: 1x Reset
LED: 1x LED Power (non-controllable)
1x LED Status (internal)
1x LED LAN (controlled by PHY)
1x LED WLAN
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad)
Header is located next to external-LED header.
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit cb3cd526948af3f69da1af18e035177a0a8f58e3)
Diffstat (limited to 'target/linux/ath79/image')
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index d5f67b88a6..4bfdd69d6d 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -243,6 +243,14 @@ define Device/devolo_dvl1750i endef TARGET_DEVICES += devolo_dvl1750i +define Device/devolo_dvl1750x + ATH_SOC := qca9558 + DEVICE_TITLE := devolo WiFi pro 1750x + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct + IMAGE_SIZE := 15936k +endef +TARGET_DEVICES += devolo_dvl1750x + define Device/dlink_dir-825-b1 ATH_SOC := ar7161 DEVICE_TITLE := D-LINK DIR-825 B1 |