diff options
| author | Ivaylo Ivanov <iivailo@mail.bg> | 2022-08-25 09:10:13 +0300 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-11-13 22:36:06 +0100 |
| commit | 6afc355b2e120ff2701cc9aca66af19c6a0aeca2 (patch) | |
| tree | 296666a47e97a1bae592e3461c471bcc48655ee7 /target/linux/ath79/image/generic.mk | |
| parent | 794d1645b3d4e6735b4a749f39cfeaa05f60b101 (diff) | |
| download | upstream-6afc355b2e120ff2701cc9aca66af19c6a0aeca2.tar.gz upstream-6afc355b2e120ff2701cc9aca66af19c6a0aeca2.tar.bz2 upstream-6afc355b2e120ff2701cc9aca66af19c6a0aeca2.zip | |
ramips: Add support for D-Link DIR-3060 A1
Hardware specification:
SoC: MediaTek MT7621AT
Flash: Winbond W29N01HVSINA 128MB
RAM: Micron MT41K128M16JT-125 256MB
Ethernet: 4x 10/100/1000 Mbps
WiFi1: MT7615DN 2.4GHz N 2x2:2
WiFi2: MT7615DN 5GHz AC 2x2:2
WiFi3: MT7615N 5GHz AC 4x4:4
Button: WPS, Reset
Flash instructions:
OpenWrt can be installed via D-Link Recovery GUI:
Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable.
Give it ~30 seconds, to boot the recovery mode GUI
Connect your client computer to LAN1 of the device
Set your client IP address manually to 192.168.0.2 / 255.255.255.0.
Call the recovery page for the device at http://192.168.0.1/
Use the provided emergency web GUI to upload and flash a new firmware to the device
Signed-off-by: Ivaylo Ivanov <iivailo@mail.bg>
Diffstat (limited to 'target/linux/ath79/image/generic.mk')
0 files changed, 0 insertions, 0 deletions