ath79: split base-files into subtargets

While most of the target's contents are split into subtargets, the
base-files are maintained for the target as a whole.

However, OpenWrt already implements a mechanism that will use (and
even prefer) files in the subtargets' directories. This can be
exploited to make several scripts subtarget-specific and thus save
some space (especially helpful for the tiny devices).

The only script remaining in parent base-files is
/etc/hotplug.d/ieee80211/00-wifi-migration, everything else is
moved/split.

Note that this will increase overall code lines, but reduce code
per subtarget.

base-files ipk size reduction:
master (generic)   49135 B
split (generic)    48533 B (- 0.6 kiB)
split (tiny)       43337 B (- 5.7 kiB)
split (nand)       44423 B (- 4.6 kiB)

Tested on TL-WR1043ND v4 (generic) and TL-WR841N v12 (tiny).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

11 files changed, 1275 insertions, 0 deletions

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..e3575ff041
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -0,0 +1,248 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+boardname="${board##*,}"
+
+case "$board" in
+8dev,carambola2)
+	ucidef_set_led_netdev "lan" "LAN" "$boardname:orange:eth0" "eth0"
+	ucidef_set_led_switch "wan" "WAN" "$boardname:orange:eth1" "switch0" "0x04"
+	;;
+alfa-network,ap121f)
+	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+	;;
+avm,fritz300e)
+	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
+	ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:green:rssi2" "wlan0" "40" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
+	;;
+avm,fritz4020)
+	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x1E"
+	;;
+comfast,cf-e110n-v2)
+	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
+	ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x02"
+	ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
+	;;
+comfast,cf-e120a-v3)
+	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
+	ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x04"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
+	;;
+comfast,cf-e313ac)
+	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
+	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
+	;;
+comfast,cf-e314n-v2)
+	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
+	;;
+comfast,cf-e5)
+	ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02"
+	ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:blue:rssi0" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100"
+	;;
+dlink,dir-842-c1|\
+dlink,dir-842-c2|\
+dlink,dir-842-c3|\
+dlink,dir-859-a1)
+	ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
+	;;
+engenius,ecb1750)
+	ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
+	;;
+engenius,ews511ap)
+	ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth1"
+	ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth0"
+	;;
+etactica,eg200)
+	ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0"
+	ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
+	;;
+glinet,gl-ar150)
+	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
+	;;
+glinet,gl-ar300m-nor)
+	ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0"
+	;;
+glinet,gl-ar300m-lite)
+	ucidef_set_led_netdev "lan" "LAN" "gl-ar300m-lite:green:lan" "eth0"
+	;;
+glinet,gl-x750)
+	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
+	;;
+pcs,cap324)
+	ucidef_set_led_netdev "lan" "LAN" "pcs:lan:green" "eth0"
+	;;
+pcs,cr3000)
+	ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04"
+	ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10"
+	ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02"
+	;;
+qihoo,c301)
+	ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+	;;
+tplink,archer-a7-v5|\
+tplink,archer-c7-v4|\
+tplink,archer-c7-v5)
+	ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
+	;;
+tplink,archer-c2-v3|\
+tplink,tl-wr1043nd-v4|\
+tplink,tl-wr1043n-v5)
+	ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+	;;
+tplink,archer-c6-v2)
+	ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C"
+	ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
+	;;
+tplink,archer-c25-v1|\
+tplink,tl-wr842n-v3)
+	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+	;;
+tplink,archer-c58-v1|\
+tplink,archer-c59-v1|\
+tplink,archer-c59-v2|\
+tplink,archer-c60-v1|\
+tplink,archer-c60-v2)
+	ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
+	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+	;;
+tplink,archer-d50-v1)
+	ucidef_set_led_switch "lan" "LAN" "tp-link:white:lan" "switch0" "0x1c"
+	ucidef_set_led_switch "wan_data" "WAN Data" "tp-link:white:internet" "switch0" "0x02" "" "tx rx"
+	ucidef_set_led_switch "wan_link" "WAN Link" "tp-link:white:wan" "switch0" "0x02" "" "link"
+	;;
+tplink,cpe210-v1|\
+tplink,cpe220-v2|\
+tplink,cpe510-v1)
+	ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "30" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
+	;;
+tplink,cpe210-v2|\
+tplink,cpe210-v3)
+	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "30" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
+	;;
+tplink,cpe510-v2|\
+tplink,cpe510-v3)
+	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
+	;;
+tplink,cpe610-v1)
+	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
+	;;
+tplink,re355-v1|\
+tplink,re450-v1|\
+tplink,re450-v2)
+	ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
+	ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
+	;;
+tplink,tl-wr842n-v2)
+	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+	;;
+trendnet,tew-823dru)
+	ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0"
+	;;
+ubnt,bullet-m|\
+ubnt,bullet-m-xw|\
+ubnt,nanostation-m|\
+ubnt,nanostation-m-xw|\
+ubnt,rocket-m)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100"
+	;;
+ubnt,nanobeam-ac|\
+ubnt,nanostation-ac)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:blue:rssi0" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:blue:rssi1" "wlan0" "26" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:blue:rssi2" "wlan0" "51" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:blue:rssi3" "wlan0" "76" "100"
+	;;
+wd,mynet-wifi-rangeextender)
+	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:rssi-low" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimedium" "RSSIMED" "$boardname:blue:rssi-med" "wlan0" "33" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIMAX" "$boardname:blue:rssi-max" "wlan0" "66" "100"
+	;;
+yuncore,a770)
+	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x10"
+	;;
+zbtlink,zbt-wd323)
+	ucidef_set_led_switch "lan1" "LAN1" "zbt-wd323:orange:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "zbt-wd323:orange:lan2" "switch0" "0x08"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..7507c6584c
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -0,0 +1,419 @@
+#!/bin/sh
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/k2t.sh
+
+ath79_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	adtran,bsap1800-v2|\
+	adtran,bsap1840|\
+	alfa-network,ap121f|\
+	aruba,ap-105|\
+	avm,fritz300e|\
+	devolo,dvl1200i|\
+	devolo,dvl1750c|\
+	devolo,dvl1750i|\
+	devolo,dvl1750x|\
+	engenius,ecb1750|\
+	glinet,gl-ar300m-lite|\
+	netgear,ex6400|\
+	netgear,ex7300|\
+	ocedo,koala|\
+	ocedo,raccoon|\
+	pcs,cap324|\
+	pisen,ts-d084|\
+	pisen,wmb001n|\
+	pisen,wmm003n|\
+	tplink,cpe210-v2|\
+	tplink,cpe210-v3|\
+	tplink,cpe510-v2|\
+	tplink,cpe510-v3|\
+	tplink,cpe610-v1|\
+	tplink,re350k-v1|\
+	tplink,re355-v1|\
+	tplink,re450-v1|\
+	tplink,re450-v2|\
+	ubnt,bullet-m|\
+	ubnt,bullet-m-xw|\
+	ubnt,lap-120|\
+	ubnt,nanobeam-ac|\
+	ubnt,nanostation-ac-loco|\
+	ubnt,rocket-m|\
+	ubnt,unifiac-lite|\
+	ubnt,unifiac-lr|\
+	ubnt,unifiac-mesh|\
+	ubnt,unifi|\
+	wd,mynet-wifi-rangeextender|\
+	winchannel,wb2000)
+		ucidef_set_interface_lan "eth0"
+		;;
+	avm,fritz4020|\
+	pcs,cr3000|\
+	tplink,archer-c58-v1|\
+	tplink,archer-c59-v1|\
+	tplink,archer-c59-v2)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+		;;
+	buffalo,bhr-4grv|\
+	buffalo,wzr-hp-g450h)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+		;;
+	buffalo,bhr-4grv2|\
+	trendnet,tew-823dru)
+		ucidef_add_switch "switch0" \
+			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
+		;;
+	buffalo,wzr-hp-ag300h|\
+	tplink,archer-c25-v1|\
+	tplink,tl-wdr3500-v1|\
+	tplink,tl-wr842n-v1|\
+	tplink,tl-wr842n-v3|\
+	ubnt,airrouter)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+	buffalo,wzr-hp-g302h-a1a0)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
+		;;
+	comfast,cf-e110n-v2|\
+	comfast,cf-e120a-v3|\
+	comfast,cf-e314n-v2|\
+	tplink,cpe210-v1|\
+	tplink,cpe220-v2|\
+	tplink,cpe510-v1|\
+	ubnt,nanostation-m|\
+	ubnt,routerstation)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		;;
+	comfast,cf-wr650ac-v1|\
+	comfast,cf-wr650ac-v2)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
+		;;
+	devolo,dvl1200e|\
+	devolo,dvl1750e|\
+	ocedo,ursus)
+		ucidef_set_interface_lan "eth0 eth1"
+		;;
+	dlink,dir-825-b1)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+		;;
+	dlink,dir-825-c1|\
+	dlink,dir-835-a1|\
+	dlink,dir-842-c1|\
+	dlink,dir-842-c2|\
+	dlink,dir-842-c3|\
+	dlink,dir-859-a1|\
+	engenius,epg5000|\
+	tplink,archer-c2-v3|\
+	tplink,tl-wr1043nd-v4|\
+	tplink,tl-wr1043n-v5)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
+		;;
+	elecom,wrc-1750ghbk2-i|\
+	elecom,wrc-300ghbk2-i)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+		;;
+	embeddedwireless,dorin)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
+		;;
+	engenius,ews511ap)
+		ucidef_set_interface_lan "eth0 eth1" "dhcp"
+		;;
+	etactica,eg200)
+		ucidef_set_interface_lan "eth0" "dhcp"
+		;;
+	glinet,gl-ar750)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan"
+		;;
+	glinet,gl-ar750s)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan:2" "3:lan:1" "1:wan"
+		;;
+	iodata,etg3-r|\
+	iodata,wn-ac1167dgr|\
+	iodata,wn-ac1600dgr|\
+	iodata,wn-ac1600dgr2|\
+	iodata,wn-ag300dgr|\
+	pcs,cr5000|\
+	sitecom,wlr-7100|\
+	wd,mynet-n750)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+	;;
+	librerouter,librerouter-v1)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "5:wan" "6@eth1" "4:lan"
+	;;
+	nec,wg1200cr|\
+	ubnt,nanostation-ac|\
+	ubnt,unifiac-mesh-pro|\
+	ubnt,unifiac-pro)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan" "3:wan"
+		;;
+	nec,wg800hp)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
+		;;
+	netgear,wndr3700|\
+	netgear,wndr3700v2|\
+	netgear,wndr3800|\
+	netgear,wndr3800ch)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
+		ucidef_add_switch_attr "switch0" "blinkrate" 2
+		ucidef_add_switch_port_attr "switch0" 1 led 6
+		ucidef_add_switch_port_attr "switch0" 2 led 9
+		ucidef_add_switch_port_attr "switch0" 5 led 2
+		;;
+	phicomm,k2t)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
+		;;
+	qihoo,c301)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan" "3:lan"
+		;;
+	rosinson,wr818)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:wan"
+		;;
+	tplink,archer-a7-v5|\
+	tplink,archer-c6-v2|\
+	tplink,archer-c7-v4|\
+	tplink,archer-c7-v5|\
+	tplink,tl-wdr3600-v1|\
+	tplink,tl-wdr4300-v1)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+		;;
+	tplink,archer-c5-v1|\
+	tplink,archer-c7-v1|\
+	tplink,archer-c7-v2|\
+	tplink,tl-wdr4900-v2)
+		ucidef_add_switch "switch0" \
+			"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
+		;;
+	tplink,archer-c60-v1|\
+	tplink,archer-c60-v2)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+		;;
+	tplink,archer-d50-v1)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
+		;;
+	tplink,tl-wr842n-v2)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+		;;
+	tplink,tl-wr1043nd-v1)
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+		;;
+	tplink,tl-wr1043nd-v2|\
+	tplink,tl-wr1043nd-v3)
+		ucidef_add_switch "switch0" \
+			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
+		;;
+	tplink,tl-wr2543-v1)
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
+		;;
+	ubnt,acb-isp)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
+		;;
+	ubnt,routerstation-pro)
+		ucidef_set_interface_wan "eth0"
+		ucidef_add_switch "switch0" \
+			"0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+	ubnt,nanostation-m-xw)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "5:lan" "1:wan"
+		;;
+	zbtlink,zbt-wd323|\
+	xiaomi,mi-router-4q)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "3:lan:1" "4:lan:2"
+		;;
+	zyxel,nbg6716)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
+		;;
+	*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+	esac
+}
+
+ath79_setup_macs()
+{
+	local board="$1"
+
+	case "$board" in
+	adtran,bsap1800-v2|\
+	adtran,bsap1840)
+		lan_mac=$(mtd_get_mac_binary "Board data" 2)
+		label_mac=$lan_mac
+		;;
+	alfa-network,ap121f|\
+	ubnt,airrouter|\
+	ubnt,bullet-m|\
+	ubnt,nanostation-m|\
+	ubnt,rocket-m|\
+	ubnt,unifi)
+		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+		;;
+	avm,fritz300e)
+		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
+		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+		;;
+	avm,fritz4020)
+		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
+		wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
+		;;
+	dlink,dir-825-b1)
+		lan_mac=$(mtd_get_mac_text "caldata" 0xffa0)
+		wan_mac=$(mtd_get_mac_text "caldata" 0xffb4)
+		;;
+	dlink,dir-825-c1|\
+	dlink,dir-835-a1)
+		lan_mac=$(mtd_get_mac_text "mac" 0x4)
+		wan_mac=$(mtd_get_mac_text "mac" 0x18)
+		;;
+	dlink,dir-842-c1|\
+	dlink,dir-842-c2|\
+	dlink,dir-842-c3|\
+	nec,wg1200cr)
+		lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
+		wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
+		label_mac=$lan_mac
+		;;
+	dlink,dir-859-a1|\
+	qihoo,c301|\
+	wd,mynet-n750)
+		lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
+		wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
+		;;
+	elecom,wrc-1750ghbk2-i|\
+	elecom,wrc-300ghbk2-i)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" -2)
+		;;
+	engenius,ecb1750)
+		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		label_mac=$(mtd_get_mac_ascii u-boot-env athaddr)
+		;;
+	engenius,epg5000)
+		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+		;;
+	engenius,ews511ap)
+		lan_mac=$(mtd_get_mac_text "u-boot-env" 0xe9)
+		eth1_mac=$(macaddr_add "$lan_mac" 1)
+		ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
+		ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
+		;;
+	iodata,etg3-r)
+		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		wan_mac=$(macaddr_add "$lan_mac" -1)
+		label_mac=$wan_mac
+		;;
+	iodata,wn-ac1167dgr|\
+	iodata,wn-ac1600dgr|\
+	iodata,wn-ac1600dgr2|\
+	iodata,wn-ag300dgr)
+		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+		label_mac=$wan_mac
+		;;
+	jjplus,ja76pf2)
+		wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n alias/ethaddr)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	nec,wg800hp)
+		lan_mac=$(mtd_get_mac_text board_data 0x280)
+		wan_mac=$(mtd_get_mac_text board_data 0x480)
+		label_mac=$wan_mac
+		;;
+	netgear,wndr3700|\
+	netgear,wndr3700v2|\
+	netgear,wndr3800)
+		lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0x0)")
+		;;
+	phicomm,k2t)
+		lan_mac=$(k2t_get_mac "lan_mac")
+		wan_mac=$(k2t_get_mac "wan_mac")
+		;;
+	rosinson,wr818)
+		wan_mac=$(mtd_get_mac_binary factory 0x0)
+		lan_mac=$(macaddr_setbit_la "$wan_mac")
+		;;
+	sitecom,wlr-7100)
+		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+		label_mac=$lan_mac
+		;;
+	tplink,archer-a7-v5|\
+	tplink,archer-c7-v4|\
+	tplink,archer-c7-v5|\
+	tplink,tl-wr1043nd-v4|\
+	tplink,tl-wr1043n-v5)
+		base_mac=$(mtd_get_mac_binary info 0x8)
+		wan_mac=$(macaddr_add "$base_mac" 1)
+		;;
+	trendnet,tew-823dru)
+		lan_mac=$(mtd_get_mac_text mac 0x4)
+		wan_mac=$(mtd_get_mac_text mac 0x18)
+		label_mac=$wan_mac
+		;;
+	ubnt,routerstation|\
+	ubnt,routerstation-pro)
+		wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	wd,mynet-wifi-rangeextender)
+		lan_mac=$(nvram get et0macaddr)
+		;;
+	zyxel,nbg6716)
+		lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+		wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ath79_setup_interfaces $board
+ath79_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
new file mode 100755
index 0000000000..d84d6cfe85
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
@@ -0,0 +1,66 @@
+#!/bin/sh
+#
+# Copyright (C) 2018 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+adtran,bsap1800-v2|\
+adtran,bsap1840)
+	ucidef_add_gpio_switch "wifi1_ext_a" "5GHz External Antenna A" "489" "1"
+	ucidef_add_gpio_switch "wifi1_int_a" "5GHz Internal Antenna A" "493"
+	ucidef_add_gpio_switch "wifi1_ext_b" "5GHz External Antenna B" "494" "1"
+	ucidef_add_gpio_switch "wifi1_int_b" "5GHz Internal Antenna B" "495"
+	ucidef_add_gpio_switch "wifi1_ext_c" "5GHz External Antenna C" "496" "1"
+	ucidef_add_gpio_switch "wifi1_int_c" "5GHz Internal Antenna C" "497"
+	ucidef_add_gpio_switch "wifi0_ext_a" "2.4GHz External Antenna A" "505" "1"
+	ucidef_add_gpio_switch "wifi0_int_a" "2.4GHz Internal Antenna A" "506"
+	ucidef_add_gpio_switch "wifi0_ext_b" "2.4GHz External Antenna B" "507" "1"
+	ucidef_add_gpio_switch "wifi0_int_b" "2.4GHz Internal Antenna B" "508"
+	ucidef_add_gpio_switch "wifi0_ext_c" "2.4GHz External Antenna C" "509" "1"
+	ucidef_add_gpio_switch "wifi0_int_c" "2.4GHz Internal Antenna C" "510"
+	;;
+comfast,cf-e5)
+	ucidef_add_gpio_switch "lte_power" "LTE Power" "14" "1"
+	ucidef_add_gpio_switch "lte_wakeup" "LTE Wakeup" "11" "1"
+	ucidef_add_gpio_switch "lte_poweroff" "LTE Poweroff" "1" "1"
+	ucidef_add_gpio_switch "lte_reset" "LTE Reset" "12" "1"
+	;;
+dlink,dir-825-c1|\
+dlink,dir-835-a1)
+	ucidef_add_gpio_switch "wan_led_auto" "WAN LED Auto" "20" "0"
+	;;
+librerouter,librerouter-v1)
+	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0"
+	;;
+tplink,archer-c25-v1)
+	ucidef_add_gpio_switch "led_control" "LED control" "21" "0"
+	ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1"
+	;;
+tplink,cpe210-v1|\
+tplink,cpe220-v2|\
+tplink,cpe510-v1)
+	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
+	;;
+ubnt,nanostation-ac)
+	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
+	;;
+ubnt,acb-isp)
+	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11"
+	;;
+zbtlink,zbt-wd323)
+	ucidef_add_gpio_switch "io0" "IO#0" "0"
+	ucidef_add_gpio_switch "io1" "IO#1" "1"
+	ucidef_add_gpio_switch "io2" "IO#2" "2"
+	ucidef_add_gpio_switch "io14" "IO#14" "14"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
new file mode 100644
index 0000000000..f1bc6c3c22
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -0,0 +1,144 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath9k-eeprom-ahb-18100000.wmac.bin")
+	case $board in
+	avm,fritz4020)
+		caldata_extract_reverse "urlader" 0x1541 0x440
+		;;
+	dlink,dir-825-c1|\
+	dlink,dir-835-a1)
+		caldata_extract "art" 0x1000 0x440
+		ath9k_patch_mac $(mtd_get_mac_text "mac" 0x4)
+		;;
+	dlink,dir-842-c1|\
+	dlink,dir-842-c2|\
+	dlink,dir-842-c3|\
+	dlink,dir-859-a1|\
+	nec,wg1200cr|\
+	wd,mynet-n750)
+		caldata_extract "art" 0x1000 0x440
+		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
+		;;
+	engenius,ecb1750)
+		caldata_extract "art" 0x1000 0x440
+		ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1)
+		;;
+	engenius,epg5000|\
+	iodata,wn-ac1167dgr|\
+	iodata,wn-ac1600dgr|\
+	iodata,wn-ac1600dgr2|\
+	iodata,wn-ag300dgr|\
+	sitecom,wlr-7100)
+		caldata_extract "art" 0x1000 0x440
+		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
+		;;
+	nec,wg800hp)
+		caldata_extract "art" 0x1000 0x440
+		ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
+		;;
+	qihoo,c301)
+		caldata_extract "radiocfg" 0x1000 0x440
+		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
+		;;
+	zyxel,nbg6716)
+		caldata_extract "art" 0x1000 0x440
+		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
+		;;
+	*)
+		caldata_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+"ath9k-eeprom-pci-0000:00:00.0.bin")
+	case $board in
+	avm,fritz300e)
+		caldata_extract_reverse "urloader" 0x1541 0x440
+		;;
+	buffalo,wzr-hp-g302h-a1a0)
+		caldata_extract "art" 0x1000 0xeb8
+		;;
+	buffalo,wzr-hp-g450h)
+		caldata_extract "art" 0x1000 0x440
+		;;
+	dlink,dir-825-c1|\
+	dlink,dir-835-a1)
+		caldata_extract "art" 0x5000 0x440
+		ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1)
+		;;
+	ocedo,raccoon|\
+	tplink,tl-wdr3500-v1|\
+	tplink,tl-wdr3600-v1|\
+	tplink,tl-wdr4300-v1|\
+	tplink,tl-wdr4900-v2|\
+	winchannel,wb2000)
+		caldata_extract "art" 0x5000 0x440
+		;;
+	pcs,cap324|\
+	tplink,tl-wr2543-v1|\
+	tplink,tl-wr842n-v1|\
+	ubnt,airrouter|\
+	ubnt,bullet-m|\
+	ubnt,nano-m|\
+	ubnt,rocket-m)
+		caldata_extract "art" 0x1000 0x1000
+		;;
+	ubnt,unifi)
+		caldata_extract "art" 0x1000 0x800
+		;;
+	wd,mynet-n750)
+		caldata_extract "art" 0x5000 0x440
+		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
+		;;
+	wd,mynet-wifi-rangeextender)
+		caldata_extract "art" 0x1000 0x1000
+		ath9k_patch_mac $(nvram get wl0_hwaddr)
+		;;
+	*)
+		caldata_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+"ath9k-eeprom-pci-0000:00:11.0.bin")
+	case $board in
+	buffalo,wzr-hp-ag300h|\
+	netgear,wndr3700|\
+	netgear,wndr3700v2|\
+	netgear,wndr3800|\
+	netgear,wndr3800ch)
+		caldata_extract "art" 0x1000 0xeb8
+		;;
+	dlink,dir-825-b1)
+		caldata_extract "caldata" 0x1000 0xeb8
+		ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
+		;;
+	*)
+		caldata_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+"ath9k-eeprom-pci-0000:00:12.0.bin")
+	case $board in
+	buffalo,wzr-hp-ag300h|\
+	netgear,wndr3700|\
+	netgear,wndr3700v2|\
+	netgear,wndr3800|\
+	netgear,wndr3800ch)
+		caldata_extract "art" 0x5000 0xeb8
+		;;
+	dlink,dir-825-b1)
+		caldata_extract "caldata" 0x5000 0xeb8
+		ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
+		;;
+	*)
+		caldata_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+esac
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
new file mode 100644
index 0000000000..91e813f121
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -0,0 +1,167 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+. /lib/functions/k2t.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:00:00.0.bin")
+	case $board in
+	comfast,cf-wr650ac-v1|\
+	comfast,cf-wr650ac-v2|\
+	yuncore,a770)
+		caldata_extract "art" 0x5000 0x844
+		;;
+	devolo,dvl1200e|\
+	devolo,dvl1200i|\
+	devolo,dvl1750c|\
+	devolo,dvl1750e|\
+	devolo,dvl1750i|\
+	devolo,dvl1750x)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
+		;;
+	dlink,dir-859-a1)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
+		;;
+	elecom,wrc-1750ghbk2-i)
+		caldata_extract "art" 0x5000 0x844
+		;;
+	engenius,ecb1750)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
+		;;
+	engenius,epg5000|\
+	iodata,wn-ac1167dgr|\
+	iodata,wn-ac1600dgr2|\
+	sitecom,wlr-7100)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		;;
+	engenius,ews511ap)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+		;;
+	glinet,gl-ar750|\
+	glinet,gl-ar750s)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
+		;;
+	glinet,gl-x750)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+		;;
+	nec,wg800hp)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
+		;;
+	ocedo,koala|\
+	ocedo,ursus)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
+		;;
+	openmesh,om5p-ac-v2)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+		;;
+	qihoo,c301)
+		caldata_extract "radiocfg" 0x5000 0x844
+		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
+		;;
+	tplink,archer-a7-v5|\
+	tplink,archer-c2-v3|\
+	tplink,archer-c7-v4|\
+	tplink,archer-c7-v5|\
+	tplink,archer-c25-v1)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
+		;;
+	tplink,archer-c5-v1|\
+	tplink,archer-c7-v2)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
+		;;
+	tplink,archer-d50-v1)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
+		;;
+	tplink,re350k-v1)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
+		;;
+	tplink,re355-v1|\
+	tplink,re450-v1)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
+		;;
+	tplink,re450-v2)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+		;;
+	ubnt,unifiac-lite|\
+	ubnt,unifiac-lr|\
+	ubnt,unifiac-mesh|\
+	ubnt,unifiac-mesh-pro|\
+	ubnt,lap-120|\
+	ubnt,nanobeam-ac|\
+	ubnt,nanostation-ac|\
+	ubnt,nanostation-ac-loco|\
+	ubnt,unifiac-pro)
+		caldata_extract "EEPROM" 0x5000 0x844
+		;;
+	zyxel,nbg6716)
+		caldata_extract "art" 0x5000 0x844
+		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		;;
+	esac
+	;;
+"ath10k/pre-cal-pci-0000:00:00.0.bin")
+	case $board in
+	comfast,cf-e313ac)
+		caldata_extract "art" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary art 0x6)
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+		;;
+	dlink,dir-842-c1|\
+	dlink,dir-842-c2|\
+	dlink,dir-842-c3|\
+	nec,wg1200cr)
+		caldata_extract "art" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	netgear,ex6400|\
+	netgear,ex7300)
+		caldata_extract "caldata" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
+		;;
+	phicomm,k2t)
+		caldata_extract "art" 0x5000 0x2f20
+		ath10k_patch_mac $(k2t_get_mac "5g_mac")
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	tplink,archer-c58-v1|\
+	tplink,archer-c59-v1|\
+	tplink,archer-c59-v2|\
+	tplink,archer-c60-v1|\
+	tplink,archer-c60-v2|\
+	tplink,archer-c6-v2)
+		caldata_extract "art" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
new file mode 100644
index 0000000000..8c8b7932bc
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -0,0 +1,45 @@
+#!/bin/ash
+
+[ "$ACTION" = "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+. /lib/functions/k2t.sh
+
+board=$(board_name)
+
+case "$board" in
+	adtran,bsap1800-v2|\
+	adtran,bsap1840)
+		macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
+		;;
+	iodata,wn-ac1600dgr)
+		# There is no eeprom data for 5 GHz wlan in "art" partition
+		# which would allow to patch the macaddress
+		[ "$PHYNBR" -eq 0 ] && \
+			macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
+		;;
+	iodata,wn-ag300dgr)
+		# There is no eeprom data for 5 GHz wlan in "art" partition
+		# which would allow to patch the macaddress
+		[ "$PHYNBR" -eq 1 ] && \
+			macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
+		;;
+	phicomm,k2t)
+		# The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address
+		[ "$PHYNBR" -eq 1 ] && \
+			k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress
+		;;
+	trendnet,tew-823dru)
+		# set the 2.4G interface mac address to LAN MAC
+		[ "$PHYNBR" -eq 1 ] && \
+			mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress
+		# set the 5G interface mac address to WAN MAC + 1
+		[ "$PHYNBR" -eq 0 ] && \
+			macaddr_add "$(mtd_get_mac_text mac 0x18)" 1 > /sys${DEVPATH}/macaddress
+		;;
+esac
diff --git a/target/linux/ath79/generic/base-files/etc/init.d/bootcount b/target/linux/ath79/generic/base-files/etc/init.d/bootcount
new file mode 100755
index 0000000000..7807559d81
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/etc/init.d/bootcount
@@ -0,0 +1,16 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	case $(board_name) in
+	adtran,bsap1800-v2|\
+	adtran,bsap1840)
+		fconfig -s -w -d $(find_mtd_part "RedBoot config") -n boot_cntb -x 0
+		;;
+	qihoo,c301)
+		local n=$(fw_printenv activeregion | cut -d = -f 2)
+		fw_setenv "image${n}trynum" 0
+		;;
+	esac
+}
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
new file mode 100644
index 0000000000..b23e5f7db6
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/migrations.sh
+
+board=$(board_name)
+boardonly="${board##*,}"
+
+case "$board" in
+engenius,epg5000)
+	migrate_leds ":wlan-2g=:wlan2g" ":wlan-5g=:wlan5g"
+	;;
+tplink,archer-c25-v1|\
+tplink,archer-c58-v1|\
+tplink,archer-c59-v1|\
+tplink,archer-c59-v2|\
+tplink,archer-c60-v1|\
+tplink,archer-c60-v2|\
+tplink,archer-c7-v4|\
+tplink,archer-c7-v5)
+	migrate_leds "^$boardonly:=tp-link:"
+	;;
+tplink,archer-c7-v2)
+	migrate_leds ":blue:=:green:"
+	;;
+tplink,re355-v1)
+	migrate_leds "re355:=tp-link:"
+	;;
+tplink,re450-v1)
+	migrate_leds "re450:=tp-link:"
+	;;
+wd,mynet-n750)
+	migrate_leds "wd:=mynet-n750:"
+	;;
+esac
+
+migrations_apply system
+
+exit 0
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
new file mode 100644
index 0000000000..22c9483e74
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
@@ -0,0 +1,15 @@
+#!/bin/sh
+. /lib/functions.sh
+
+fix_seama_header() {
+	local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
+	[ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware
+}
+
+board=$(board_name)
+
+case "$board" in
+qihoo,c301)
+	fix_seama_header
+	;;
+esac
diff --git a/target/linux/ath79/generic/base-files/lib/functions/k2t.sh b/target/linux/ath79/generic/base-files/lib/functions/k2t.sh
new file mode 100755
index 0000000000..1158df818b
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/lib/functions/k2t.sh
@@ -0,0 +1,55 @@
+#!/bin/sh
+#
+# Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com>
+#
+# Helper function to extract mac addresses from mtd part for Phicomm K2T
+#
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+. /usr/share/libubox/jshn.sh
+
+k2t_config_load() {
+	local mtd_blk=$(find_mtd_part config)
+
+	if [ -z "$mtd_blk" ]; then
+		echo "k2t_config_load: no mtd part named config" >&2
+		exit 1
+	fi
+
+	local json_size=$(dd if=$mtd_blk bs=1 count=8 2>/dev/null)
+
+	json_size="0x$json_size"
+	json_size=$((json_size))
+
+	if [ "$?" -ne 0 ]; then
+		echo "k2t_config_load: invalid json data size" >&2
+		exit 2
+	fi
+
+	if [ "$json_size" -eq 0 ]; then
+		echo "k2t_config_load: empty json data" >&2
+		exit 3
+	fi
+
+	local json_data=$(dd if=$mtd_blk bs=1 skip=8 count=$json_size 2>/dev/null)
+
+	json_load "$json_data"
+}
+
+k2t_get_mac() {
+	local old_ns
+
+	json_set_namespace "k2t" old_ns
+
+	if k2t_config_load; then
+		json_select "this_dev_info"
+		json_get_var val "$1"
+		json_select ..
+	fi
+
+	json_set_namespace old_ns
+
+	echo $val
+}
+
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..83c4e78d25
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,61 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+redboot_fis_do_upgrade() {
+	local append
+	local sysup_file="$1"
+	local kern_part="$2"
+	local magic=$(get_magic_word "$sysup_file")
+
+	if [ "$magic" = "4349" ]; then
+		local kern_length=0x$(dd if="$sysup_file" bs=2 skip=1 count=4 2>/dev/null)
+
+		[ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
+		dd if="$sysup_file" bs=64k skip=1 2>/dev/null | \
+			mtd -r $append -F$kern_part:$kern_length:0x80060000,rootfs write - $kern_part:rootfs
+
+	elif [ "$magic" = "7379" ]; then
+		local board_dir=$(tar tf $sysup_file | grep -m 1 '^sysupgrade-.*/$')
+		local kern_length=$(tar xf $sysup_file ${board_dir}kernel -O | wc -c)
+
+		[ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
+		tar xf $sysup_file ${board_dir}kernel ${board_dir}root -O | \
+			mtd -r $append -F$kern_part:$kern_length:0x80060000,rootfs write - $kern_part:rootfs
+
+	else
+		echo "Unknown image, aborting!"
+		return 1
+	fi
+}
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	adtran,bsap1800-v2|\
+	adtran,bsap1840)
+		redboot_fis_do_upgrade "$1" vmlinux_2
+		;;
+	jjplus,ja76pf2)
+		echo "Sysupgrade disabled due bug FS#2428"
+		;;
+	ubnt,routerstation|\
+	ubnt,routerstation-pro)
+		echo "Sysupgrade disabled due bug FS#2428"
+		;;
+	zyxel,nbg6716)
+		nand_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}