aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/generic/base-files
diff options
context:
space:
mode:
authorSven Eckelmann <sven@narfation.org>2020-11-23 13:41:34 +0100
committerHauke Mehrtens <hauke@hauke-m.de>2022-01-16 21:42:19 +0100
commit8143709c90c3aa0a84e14cf4a9dfbcb365b0d966 (patch)
tree34c567545e993b15ff01d3f0c0ac2f34b3f9c341 /target/linux/ath79/generic/base-files
parent7f074fe1a79f27d30560c35778d963bc520e9a3e (diff)
downloadupstream-8143709c90c3aa0a84e14cf4a9dfbcb365b0d966.tar.gz
upstream-8143709c90c3aa0a84e14cf4a9dfbcb365b0d966.tar.bz2
upstream-8143709c90c3aa0a84e14cf4a9dfbcb365b0d966.zip
ath79: Add support for OpenMesh OM2P v1
Device specifications: ====================== * Qualcomm/Atheros AR7240 rev 2 * 350/350/175 MHz (CPU/DDR/AHB) * 32 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 1T1R 2.4 GHz Wi-Fi * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + 18-24V passive POE (mode B) + used as WAN interface - eth1 + builtin switch port 4 + used as LAN interface * 12-24V 1A DC * external antenna The device itself requires the mtdparts from the uboot arguments to properly boot the flashed image and to support dual-boot (primary + recovery image). Unfortunately, the name of the mtd device in mtdparts is still using the legacy name "ar7240-nor0" which must be supplied using the Linux-specfic DT parameter linux,mtd-name to overwrite the generic name "spi0.0". Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org>
Diffstat (limited to 'target/linux/ath79/generic/base-files')
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/01_leds4
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
-rw-r--r--target/linux/ath79/generic/base-files/lib/upgrade/platform.sh1
4 files changed, 9 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 652b54092e..03750856ab 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -271,6 +271,10 @@ openmesh,om2p-hs-v4)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0"
ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x02"
;;
+openmesh,om2p-v1)
+ ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0"
+ ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x10"
+ ;;
openmesh,om5p-ac-v1)
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 88269c03ec..54c4152757 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -188,6 +188,7 @@ ath79_setup_interfaces()
compex,wpj531-16m|\
openmesh,a40|\
openmesh,a60|\
+ openmesh,om2p-v1|\
openmesh,om2p-v4|\
openmesh,om2p-hs-v4|\
plasmacloud,pa300|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 10421c2e28..31b872e618 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -131,6 +131,9 @@ case "$FIRMWARE" in
openmesh,om5p-an)
caldata_extract "ART" 0x5000 0x440
;;
+ openmesh,om2p-v1)
+ caldata_extract "ART" 0x1000 0x440
+ ;;
wd,mynet-n600|\
wd,mynet-n750)
caldata_extract "art" 0x5000 0x440
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
index 13b6ec9d99..67e53c5fde 100644
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
@@ -73,6 +73,7 @@ platform_do_upgrade() {
openmesh,mr900-v2|\
openmesh,mr1750-v1|\
openmesh,mr1750-v2|\
+ openmesh,om2p-v1|\
openmesh,om2p-v2|\
openmesh,om2p-v4|\
openmesh,om2p-hs-v1|\