ath79: add new OF only target for QCA MIPS silicon

This target aims to replace ar71xx mid-term. The big part that is still
missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik
subtargets will follow.

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 201 insertions, 0 deletions

diff --git a/target/linux/ath79/dts/qca9557.dtsi b/target/linux/ath79/dts/qca9557.dtsi
new file mode 100644
index 0000000000..ed92da3bd7
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ath79-clk.h>
+#include "ath79.dtsi"
+
+/ {
+	compatible = "qca,qca9557";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24Kc";
+			clocks = <&pll ATH79_CLK_CPU>;
+			reg = <0>;
+		};
+	};
+
+	ahb {
+		apb {
+			ddr_ctrl: memory-controller@18000000 {
+				compatible = "qca,ar9557-ddr-controller",
+						"qca,ar7240-ddr-controller";
+				reg = <0x18000000 0x100>;
+
+				#qca,ddr-wb-channel-cells = <1>;
+			};
+
+			uart: uart@18020000 {
+				compatible = "ns16550a";
+				reg = <0x18020000 0x20>;
+
+				interrupts = <3>;
+
+				clocks = <&pll ATH79_CLK_REF>;
+				clock-names = "uart";
+
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				no-loopback-test;
+
+				status = "disabled";
+			};
+
+			gpio: gpio@18040000 {
+				compatible = "qca,ar9557-gpio",
+						"qca,ar9340-gpio";
+				reg = <0x18040000 0x28>;
+
+				interrupts = <2>;
+				ngpios = <24>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pinmux: pinmux@1804002c {
+				compatible = "pinctrl-single";
+
+				reg = <0x1804002c 0x40>;
+
+				#size-cells = <0>;
+
+				pinctrl-single,bit-per-mux;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x1>;
+				#pinctrl-cells = <2>;
+
+				jtag_disable_pins: pinmux_jtag_disable_pins {
+					pinctrl-single,bits = <0x40 0x2  0x2>;
+				};
+			};
+
+			pll: pll-controller@18050000 {
+				compatible = "qca,ar9557-pll",
+						"qca,qca9550-pll";
+				reg = <0x18050000 0x20>;
+
+				#clock-cells = <1>;
+				clock-output-names = "cpu", "ddr", "ahb";
+			};
+
+			wdt: wdt@18060008 {
+				compatible = "qca,ar7130-wdt";
+				reg = <0x18060008 0x8>;
+
+				interrupts = <4>;
+
+				clocks = <&pll ATH79_CLK_AHB>;
+				clock-names = "wdt";
+			};
+
+			rst: reset-controller@1806001c {
+				compatible = "qca,ar9557-reset",
+						"qca,ar7100-reset",
+						 "simple-bus";
+				reg = <0x1806001c 0x4>;
+
+				#reset-cells = <1>;
+				interrupt-parent = <&cpuintc>;
+
+				intc2: interrupt-controller@2 {
+					compatible = "qcom,qca9556-intc";
+
+					interrupts = <2>;
+
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					qcom,pending-bits = <0x1f0>,	/* pcie rc1 */
+							    <0xf>;	/* wmac */
+				};
+
+				intc3: interrupt-controller@3 {
+					compatible = "qcom,qca9556-intc";
+
+					interrupts = <3>;
+
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					qcom,pending-bits = <0x1f000>,		/* pcie rc2 */
+							    <0x1000000>,	/* usb1 */
+							    <0x10000000>;	/* usb2 */
+				};
+			};
+
+			pcie0: pcie-controller@180c0000 {
+				compatible = "qcom,ar7240-pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				bus-range = <0x0 0x0>;
+				reg = <0x180c0000 0x1000>, /* CRP */
+				      <0x180f0000 0x100>,  /* CTRL */
+				      <0x14000000 0x1000>; /* CFG */
+				reg-names = "crp_base", "ctrl_base", "cfg_base";
+				ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000	/* pci memory */
+					  0x1000000 0 0x00000000 0x0000000 0 0x000001>;		/* io space */
+				interrupt-parent = <&intc2>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 1>;
+				interrupt-map = <0 0 0 0 &pcie0 0>;
+				status = "disabled";
+			};
+		};
+
+		spi: spi@1f000000 {
+			compatible = "qca,ar9557-spi", "qca,ar7100-spi";
+			reg = <0x1f000000 0x10>;
+
+			clocks = <&pll ATH79_CLK_AHB>;
+			clock-names = "ahb";
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&mdio0 {
+	resets = <&rst 22>;
+	reset-names = "mdio";
+};
+
+&eth0 {
+	compatible = "qca,qca9550-eth", "syscon";
+
+	pll-data = <0x82000101 0x80000101 0x80001313>;
+	phy-mode = "rgmii";
+
+	resets = <&rst 9>;
+	reset-names = "mac";
+};
+
+&mdio1 {
+	resets = <&rst 23>;
+	reset-names = "mdio";
+};
+
+&eth1 {
+	compatible = "qca,qca9550-eth", "syscon";
+
+	pll-data = <0x82000101 0x80000101 0x80001313>;
+	phy-mode = "sgmii";
+
+	resets = <&rst 13>;
+	reset-names = "mac";
+};