diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-08-16 17:08:28 +0900 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-08-16 21:20:57 +0200 |
| commit | ff4bc483fc5ff90c9b7a188236bb072351f201bd (patch) | |
| tree | 89db91e26b939bf5862d8311e74b882def296ed4 /target/linux/ath79/base-files/etc/board.d | |
| parent | 94ee5e3d1d2a473d1124b8d59fbe4f8c9442996a (diff) | |
| download | upstream-ff4bc483fc5ff90c9b7a188236bb072351f201bd.tar.gz upstream-ff4bc483fc5ff90c9b7a188236bb072351f201bd.tar.bz2 upstream-ff4bc483fc5ff90c9b7a188236bb072351f201bd.zip | |
ath79: add support for I-O DATA WN-AC1167DGR
I-O DATA WN-AC1167DGR is a 2.4/5 GHz band 11ac router, based on
Qualcomm Atheros QCA9557.
Specification:
- Qualcomm Atheros QCA9557
- 128 MB of RAM (DDR2)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz wifi
- 2.4 GHz: SoC internal
- 5 GHz: QCA988x
- 5x 10/100/1000 Mbps Ethernet
- 6x LEDs, 6x keys (4x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- 115200n8
Flash instruction using factory image:
1. Connect the computer to the LAN port of WN-AC1167DGR
2. Connect power cable to WN-AC1167DGR and turn on it
3. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 653f813e01..603251954b 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -48,6 +48,7 @@ ath79_setup_interfaces() glinet,ar300m) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; + iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr2|\ pcs,cr5000) ucidef_add_switch "switch0" \ @@ -158,6 +159,7 @@ ath79_setup_macs() lan_mac=$(mtd_get_mac_text "caldata" 65440) wan_mac=$(mtd_get_mac_text "caldata" 65460) ;; + iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr2) lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) |