ath79: remove quotes for boardname in scripts

Quotes are not required in case statements.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

2 files changed, 54 insertions, 53 deletions

diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index f13a187350..1ae2feb080 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -8,7 +8,7 @@ board=$(board_name)
 boardname="${board##*,}"
 
 case "$board" in
-"avm,fritz300e")
+avm,fritz300e)
 	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
 	ucidef_set_rssimon "wlan0" "200000" "1"
 	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
@@ -17,60 +17,61 @@ case "$board" in
 	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
 	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
 	;;
-"etactica,eg200")
+etactica,eg200)
 	ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0"
 	ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
 	ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
 	;;
-"netgear,wnr612-v2"|\
-"on,n150r")
+netgear,wnr612-v2|\
+on,n150r)
 	ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
 	ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
 	ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
 	;;
-"pcs,cap324")
+pcs,cap324)
 	ucidef_set_led_netdev "lan" "LAN" "pcs:lan:green" "eth0"
 	;;
-"pcs,cr3000")
+pcs,cr3000)
 	ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1"
 	ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04"
 	ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08"
 	ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10"
 	ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02"
 	;;
-"pcs,cr5000")
+pcs,cr5000)
 	ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
 	;;
-"tplink,re450-v2")
+
+tplink,re450-v2)
 	ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
 	ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
 	;;
-"tplink,tl-mr3020-v1")
+tplink,tl-mr3020-v1)
 	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
 	;;
-"tplink,tl-wr1043nd-v4")
+tplink,tl-wr1043nd-v4)
 	ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
 	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
 	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
 	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
 	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
 	;;
-"tplink,tl-wr740n-v2")
+tplink,tl-wr740n-v2)
 	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
 	ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02"
 	ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x04"
 	ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
 	ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
 	;;
-"tplink,tl-wr740nd-v4"|\
-"tplink,tl-wr741nd-v4")
+tplink,tl-wr740nd-v4|\
+tplink,tl-wr741nd-v4)
 	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
 	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
 	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
 	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
 	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
 	;;
-"tplink,tl-wr841n-v9")
+tplink,tl-wr841n-v9)
 	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
 	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
 	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index dc320f08c4..d88a0f368a 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -9,34 +9,34 @@ ath79_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
-	"avm,fritz300e"|\
-	"ocedo,raccoon"|\
-	"pcs,cap324"|\
-	"tplink,re450-v2"|\
-	"tplink,tl-mr10u"|\
-	"tplink,tl-mr3020-v1"|\
-	"tplink,tl-wr703n"|\
-	"ubnt,unifiac-lite"|\
-	"ubnt,unifiac-mesh"|\
-	"ubnt,unifi")
+	avm,fritz300e|\
+	ocedo,raccoon|\
+	pcs,cap324|\
+	tplink,re450-v2|\
+	tplink,tl-mr10u|\
+	tplink,tl-mr3020-v1|\
+	tplink,tl-wr703n|\
+	ubnt,unifiac-lite|\
+	ubnt,unifiac-mesh|\
+	ubnt,unifi)
 		ucidef_set_interface_lan "eth0"
 		;;
-	"buffalo,wzr-hp-g450h")
+	buffalo,wzr-hp-g450h)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
 		;;
-	"embeddedwireless,dorin")
+	embeddedwireless,dorin)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
 		;;
-	"etactica,eg200")
+	etactica,eg200)
 		ucidef_set_interface_lan "eth0" "dhcp"
 		;;
-	"glinet,ar150"|\
-	"glinet,ar300m")
+	glinet,ar150|\
+	glinet,ar300m)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
-	"netgear,wndr3800")
+	netgear,wndr3800)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
@@ -45,76 +45,76 @@ ath79_setup_interfaces()
 		ucidef_add_switch_port_attr "switch0" 2 led 9
 		ucidef_add_switch_port_attr "switch0" 5 led 2
 		;;
-	"netgear,wnr612-v2"|\
-	"on,n150r")
+	netgear,wnr612-v2|\
+	on,n150r)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
 		"0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
 		;;
-	"pcs,cr3000")
+	pcs,cr3000)
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
 		ucidef_set_interface_wan "eth0"
 		;;
-	"pcs,cr5000")
+	pcs,cr5000)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
 		;;
-	"phicomm,k2t")
+	phicomm,k2t)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
 		;;
-	"tplink,tl-archer-c7-v2")
+	tplink,tl-archer-c7-v2)
 		ucidef_add_switch "switch0" \
 			"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
 		;;
-	"tplink,tl-mr3220-v1"|\
-	"tplink,tl-mr3420-v1"|\
-	"tplink,tl-wr841-v7")
+	tplink,tl-mr3220-v1|\
+	tplink,tl-mr3420-v1|\
+	tplink,tl-wr841-v7)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
-	"tplink,tl-wdr3600"|\
-	"tplink,tl-wdr4300")
+	tplink,tl-wdr3600|\
+	tplink,tl-wdr4300)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
 		;;
-	"tplink,tl-wr1043nd-v1")
+	tplink,tl-wr1043nd-v1)
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
 		;;
-	"tplink,tl-wr1043nd-v2"|\
-	"tplink,tl-wr1043nd-v3")
+	tplink,tl-wr1043nd-v2|\
+	tplink,tl-wr1043nd-v3)
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
 		;;
-	"tplink,tl-wr1043nd-v4")
+	tplink,tl-wr1043nd-v4)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
 		;;
-	"tplink,tl-wr2543-v1")
+	tplink,tl-wr2543-v1)
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
 		;;
-	"tplink,tl-wr740n-v2")
+	tplink,tl-wr740n-v2)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
-	"tplink,tl-wr740nd-v4"|\
-	"tplink,tl-wr741nd-v4")
+	tplink,tl-wr740nd-v4|\
+	tplink,tl-wr741nd-v4)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
-	"tplink,tl-wr841n-v9")
+	tplink,tl-wr841n-v9)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
 		"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
-	"ubnt,unifiac-mesh-pro"|\
-	"ubnt,unifiac-pro")
+	ubnt,unifiac-mesh-pro|\
+	ubnt,unifiac-pro)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan" "3:wan"
 		;;
@@ -136,7 +136,7 @@ ath79_setup_macs()
 		lan_mac=$(k2t_get_mac "lan_mac")
 		wan_mac=$(k2t_get_mac "wan_mac")
 		;;
-	"tplink,tl-wr1043nd-v4")
+	tplink,tl-wr1043nd-v4)
 		base_mac=$(mtd_get_mac_binary product-info 8)
 		wan_mac=$(macaddr_add "$base_mac" 1)
 		;;