at91: bump linux version to 5.4

Move patches to 5.4, put config only in subtarget directories.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
[refresh patches, add commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 434 deletions

diff --git a/target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch b/target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
deleted file mode 100644
index b3bede41dc..0000000000
--- a/target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
+++ /dev/null
@@ -1,434 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -50,6 +50,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	wb45n.dtb
- dtb-$(CONFIG_SOC_SAM_V7) += \
- 	at91-kizbox2.dtb \
-+	at91-sama5d2_ptc_ek.dtb \
- 	at91-sama5d27_som1_ek.dtb \
- 	at91-sama5d2_xplained.dtb \
- 	at91-sama5d3_xplained.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
-@@ -0,0 +1,421 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
-+/*
-+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
-+ *
-+ *  Copyright (C) 2017 Microchip/Atmel,
-+ *		  2017 Wenyou Yang <wenyou.yang@microchip.com>
-+ *		  2017 Ludovic Desroches <ludovic.desroches@microchip.com>
-+ */
-+/dts-v1/;
-+#include "sama5d2.dtsi"
-+#include "sama5d2-pinfunc.h"
-+#include <dt-bindings/mfd/atmel-flexcom.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/at91.h>
-+
-+/ {
-+	model = "Atmel SAMA5D2 PTC EK";
-+	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		i2c0	= &i2c0;
-+		i2c1	= &i2c1;
-+		i2c2	= &i2c2;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory {
-+		reg = <0x20000000 0x80000>;
-+	};
-+
-+	clocks {
-+		slow_xtal {
-+			clock-frequency = <32768>;
-+		};
-+
-+		main_xtal {
-+			clock-frequency = <24000000>;
-+		};
-+	};
-+
-+	ahb {
-+		usb0: gadget@00300000 {
-+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usba_vbus>;
-+			status = "okay";
-+		};
-+
-+		usb1: ohci@00400000 {
-+			num-ports = <3>;
-+			atmel,vbus-gpio = <0
-+					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
-+					   0
-+					  >;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usb_default>;
-+			status = "okay";
-+		};
-+
-+		usb2: ehci@00500000 {
-+			status = "okay";
-+		};
-+
-+		nand0: nand@80000000 {
-+			nand-bus-width = <8>;
-+			nand-ecc-mode = "hw";
-+			nand-on-flash-bbt;
-+			atmel,has-pmecc;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_nand_default>;
-+			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
-+
-+			at91bootstrap@0 {
-+				label = "bootstrap";
-+				reg = <0x0 0x40000>;
-+			};
-+
-+			bootloader@40000 {
-+				label = "bootloader";
-+				reg = <0x40000 0xc0000>;
-+			};
-+
-+			bootloaderenv@0x100000 {
-+				label = "bootloader env";
-+				reg = <0x100000 0x40000>;
-+			};
-+
-+			bootloaderenvred@0x140000 {
-+				label = "bootloader env redundant";
-+				reg = <0x140000 0x40000>;
-+			};
-+
-+			dtb@180000 {
-+				label = "device tree";
-+				reg = <0x180000 0x80000>;
-+			};
-+
-+			kernel@200000 {
-+				label = "kernel";
-+				reg = <0x200000 0x600000>;
-+			};
-+
-+			rootfs@800000 {
-+				label = "rootfs";
-+				reg = <0x800000 0x1f800000>;
-+			};
-+		};
-+
-+		sdmmc0: sdio-host@a0000000 {
-+			bus-width = <8>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-+			status = "okay";
-+		};
-+
-+		apb {
-+			pmc: pmc@f0014000 {
-+				pmc_fast_restart {
-+					compatible = "atmel,sama5d2-pmc-fast-startup";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					atmel,wakeup-rtc-timer;
-+
-+					wkpin: input@0 {
-+						reg = <0>;
-+					};
-+
-+					gmac_wol: input@10 {
-+						reg = <10>;
-+						atmel,wakeup-active-high;
-+					};
-+				};
-+			};
-+
-+			spi0: spi@f8000000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_spi0_default>;
-+				status = "okay";
-+
-+				/*
-+				m25p80@0 {
-+					compatible = "atmel,at25df321a";
-+					reg = <0>;
-+					spi-max-frequency = <50000000>;
-+				};
-+				*/
-+			};
-+
-+			macb0: ethernet@f8008000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
-+				phy-mode = "rmii";
-+				status = "okay";
-+
-+				ethernet-phy@1 {
-+					reg = <0x1>;
-+					interrupt-parent = <&pioA>;
-+					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
-+				};
-+			};
-+
-+			uart0: serial@f801c000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart0_default>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			uart2: serial@f8024000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart2_default>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			i2c0: i2c@f8028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c0_default>;
-+				i2c-sda-hold-time-ns = <350>;
-+				status = "okay";
-+			};
-+
-+			flx0: flexcom@f8034000 {
-+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-+				status = "okay";
-+
-+				i2c2: i2c@600 {
-+					compatible = "atmel,sama5d2-i2c";
-+					reg = <0x600 0x200>;
-+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-+					dmas = <0>, <0>;
-+					dma-names = "tx", "rx";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					clocks = <&flx0_clk>;
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx0_default>;
-+					atmel,fifo-size = <16>;
-+					status = "okay";
-+				};
-+			};
-+
-+			shdwc@f8048010 {
-+				atmel,shdwc-debouncer = <976>;
-+
-+				input@0 {
-+					reg = <0>;
-+					atmel,wakeup-type = "low";
-+				};
-+			};
-+
-+			watchdog@f8048040 {
-+				status = "okay";
-+			};
-+
-+			spi1: spi@fc000000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_spi1_default>;
-+				status = "okay";
-+			};
-+
-+			i2c1: i2c@fc028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c1_default>;
-+				status = "okay";
-+
-+				at24@50 {
-+					compatible = "24c02";
-+					reg = <0x50>;
-+					pagesize = <8>;
-+				};
-+			};
-+
-+			pinctrl@fc038000 {
-+				pinctrl_flx0_default: flx0_default {
-+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
-+						 <PIN_PB29__FLEXCOM0_IO1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_i2c0_default: i2c0_default {
-+					pinmux = <PIN_PD21__TWD0>,
-+						 <PIN_PD22__TWCK0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_i2c1_default: i2c1_default {
-+					pinmux = <PIN_PC6__TWD1>,
-+						 <PIN_PC7__TWCK1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_key_gpio_default: key_gpio_default {
-+					pinmux = <PIN_PA10__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_led_gpio_default: led_gpio_default {
-+					pinmux = <PIN_PB6__GPIO>,
-+						 <PIN_PB8__GPIO>,
-+						 <PIN_PB10__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_macb0_default: macb0_default {
-+					pinmux = <PIN_PB14__GTXCK>,
-+						 <PIN_PB15__GTXEN>,
-+						 <PIN_PB16__GRXDV>,
-+						 <PIN_PB17__GRXER>,
-+						 <PIN_PB18__GRX0>,
-+						 <PIN_PB19__GRX1>,
-+						 <PIN_PB20__GTX0>,
-+						 <PIN_PB21__GTX1>,
-+						 <PIN_PB22__GMDC>,
-+						 <PIN_PB23__GMDIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_macb0_phy_irq: macb0_phy_irq {
-+					pinmux = <PIN_PB24__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_nand_default: nand_default {
-+					re_we_data {
-+						pinmux = <PIN_PA22__D0>,
-+							 <PIN_PA23__D1>,
-+							 <PIN_PA24__D2>,
-+							 <PIN_PA25__D3>,
-+							 <PIN_PA26__D4>,
-+							 <PIN_PA27__D5>,
-+							 <PIN_PA28__D6>,
-+							 <PIN_PA29__D7>,
-+							 <PIN_PA30__NWE_NANDWE>,
-+							 <PIN_PB2__NRD_NANDOE>;
-+						bias-pull-up;
-+					};
-+
-+					ale_cle_rdy_cs {
-+						pinmux = <PIN_PB0__A21_NANDALE>,
-+							 <PIN_PB1__A22_NANDCLE>,
-+							 <PIN_PC8__NANDRDY>,
-+							 <PIN_PA31__NCS3>;
-+						bias-pull-up;
-+					};
-+				};
-+
-+				pinctrl_sdmmc0_default: sdmmc0_default {
-+					cmd_data {
-+						pinmux = <PIN_PA1__SDMMC0_CMD>,
-+							 <PIN_PA2__SDMMC0_DAT0>,
-+							 <PIN_PA3__SDMMC0_DAT1>,
-+							 <PIN_PA4__SDMMC0_DAT2>,
-+							 <PIN_PA5__SDMMC0_DAT3>,
-+							 <PIN_PA6__SDMMC0_DAT4>,
-+							 <PIN_PA7__SDMMC0_DAT5>,
-+							 <PIN_PA8__SDMMC0_DAT6>,
-+							 <PIN_PA9__SDMMC0_DAT7>;
-+						bias-pull-up;
-+					};
-+
-+					ck_cd_vddsel {
-+						pinmux = <PIN_PA0__SDMMC0_CK>,
-+							 <PIN_PA11__SDMMC0_VDDSEL>,
-+							 <PIN_PA13__SDMMC0_CD>;
-+						bias-disable;
-+					};
-+				};
-+
-+				pinctrl_spi0_default: spi0_default {
-+					pinmux = <PIN_PA14__SPI0_SPCK>,
-+						 <PIN_PA15__SPI0_MOSI>,
-+						 <PIN_PA16__SPI0_MISO>,
-+						 <PIN_PA17__SPI0_NPCS0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_spi1_default: spi1_default {
-+					pinmux = <PIN_PC1__SPI1_SPCK>,
-+						 <PIN_PC2__SPI1_MOSI>,
-+						 <PIN_PC3__SPI1_MISO>,
-+						 <PIN_PC4__SPI1_NPCS0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart0_default: uart0_default {
-+					pinmux = <PIN_PB26__URXD0>,
-+						 <PIN_PB27__UTXD0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart2_default: uart2_default {
-+					pinmux = <PIN_PD23__URXD2>,
-+						 <PIN_PD24__UTXD2>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usb_default: usb_default {
-+					pinmux = <PIN_PB12__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usba_vbus: usba_vbus {
-+					pinmux = <PIN_PB11__GPIO>;
-+					bias-disable;
-+				};
-+
-+			};
-+
-+			ptc@fc060000 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_key_gpio_default>;
-+
-+		bp1 {
-+			label = "PB_USER";
-+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-+			linux,code = <0x104>;
-+			wakeup-source;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_led_gpio_default>;
-+		status = "okay";
-+
-+		red {
-+			label = "red";
-+			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		green {
-+			label = "green";
-+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		blue {
-+			label = "blue";
-+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+};