ar71xx: remove linux 4.1 support

Signed-off-by: Felix Fietkau <nbd@nbd.name>

1 files changed, 0 insertions, 300 deletions

diff --git a/target/linux/ar71xx/patches-4.1/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-4.1/609-MIPS-ath79-ap136-fixes.patch
deleted file mode 100644
index 4d7902e166..0000000000
--- a/target/linux/ar71xx/patches-4.1/609-MIPS-ath79-ap136-fixes.patch
+++ /dev/null
@@ -1,300 +0,0 @@
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -18,23 +18,29 @@
-  *
-  */
- 
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/ar8216_platform.h>
- 
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "pci.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
-+#include "dev-eth.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
- 
--#define AP136_GPIO_LED_STATUS_RED	14
--#define AP136_GPIO_LED_STATUS_GREEN	19
- #define AP136_GPIO_LED_USB		4
--#define AP136_GPIO_LED_WLAN_2G		13
- #define AP136_GPIO_LED_WLAN_5G		12
-+#define AP136_GPIO_LED_WLAN_2G		13
-+#define AP136_GPIO_LED_STATUS_RED	14
- #define AP136_GPIO_LED_WPS_RED		15
-+#define AP136_GPIO_LED_STATUS_GREEN	19
- #define AP136_GPIO_LED_WPS_GREEN	20
- 
- #define AP136_GPIO_BTN_WPS		16
-@@ -43,37 +49,39 @@
- #define AP136_KEYS_POLL_INTERVAL	20	/* msecs */
- #define AP136_KEYS_DEBOUNCE_INTERVAL	(3 * AP136_KEYS_POLL_INTERVAL)
- 
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
-+#define AP136_MAC0_OFFSET		0
-+#define AP136_MAC1_OFFSET		6
-+#define AP136_WMAC_CALDATA_OFFSET	0x1000
-+#define AP136_PCIE_CALDATA_OFFSET	0x5000
- 
- static struct gpio_led ap136_leds_gpio[] __initdata = {
- 	{
--		.name		= "qca:green:status",
-+		.name		= "ap136:green:status",
- 		.gpio		= AP136_GPIO_LED_STATUS_GREEN,
- 		.active_low	= 1,
- 	},
- 	{
--		.name		= "qca:red:status",
-+		.name		= "ap136:red:status",
- 		.gpio		= AP136_GPIO_LED_STATUS_RED,
- 		.active_low	= 1,
- 	},
- 	{
--		.name		= "qca:green:wps",
-+		.name		= "ap136:green:wps",
- 		.gpio		= AP136_GPIO_LED_WPS_GREEN,
- 		.active_low	= 1,
- 	},
- 	{
--		.name		= "qca:red:wps",
-+		.name		= "ap136:red:wps",
- 		.gpio		= AP136_GPIO_LED_WPS_RED,
- 		.active_low	= 1,
- 	},
- 	{
--		.name		= "qca:red:wlan-2g",
-+		.name		= "ap136:red:wlan-2g",
- 		.gpio		= AP136_GPIO_LED_WLAN_2G,
- 		.active_low	= 1,
- 	},
- 	{
--		.name		= "qca:red:usb",
-+		.name		= "ap136:red:usb",
- 		.gpio		= AP136_GPIO_LED_USB,
- 		.active_low	= 1,
- 	}
-@@ -98,59 +106,151 @@ static struct gpio_keys_button ap136_gpi
- 	},
- };
- 
--static struct spi_board_info ap136_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l6405d",
--	}
-+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
-+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
-+
-+static struct ar8327_platform_data ap136_ar8327_data = {
-+	.pad0_cfg = &ap136_ar8327_pad0_cfg,
-+	.pad6_cfg = &ap136_ar8327_pad6_cfg,
-+	.port0_cfg = {
-+		.force_link = 1,
-+		.speed = AR8327_PORT_SPEED_1000,
-+		.duplex = 1,
-+		.txpause = 1,
-+		.rxpause = 1,
-+	},
-+	.port6_cfg = {
-+		.force_link = 1,
-+		.speed = AR8327_PORT_SPEED_1000,
-+		.duplex = 1,
-+		.txpause = 1,
-+		.rxpause = 1,
-+	},
- };
- 
--static struct ath79_spi_platform_data ap136_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect	= 1,
-+static struct mdio_board_info ap136_mdio0_info[] = {
-+	{
-+		.bus_id = "ag71xx-mdio.0",
-+		.phy_addr = 0,
-+		.platform_data = &ap136_ar8327_data,
-+	},
- };
- 
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
-+static void __init ap136_common_setup(void)
-+{
-+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-+				 ap136_leds_gpio);
-+	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-+					ARRAY_SIZE(ap136_gpio_keys),
-+					ap136_gpio_keys);
-+
-+	ath79_register_usb();
-+	ath79_register_nfc();
-+
-+	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
-+
-+	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
- 
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-+	ath79_register_mdio(0, 0x0);
-+	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
-+
-+	mdiobus_register_board_info(ap136_mdio0_info,
-+				    ARRAY_SIZE(ap136_mdio0_info));
-+
-+	/* GMAC0 is connected to the RMGII interface */
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+	ath79_eth0_data.phy_mask = BIT(0);
-+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+
-+	ath79_register_eth(0);
-+
-+	/* GMAC1 is connected tot eh SGMII interface */
-+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-+	ath79_eth1_data.speed = SPEED_1000;
-+	ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+	ath79_register_eth(1);
-+}
-+
-+static void __init ap136_010_setup(void)
- {
--	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
--		dev->dev.platform_data = &ap136_ath9k_data;
-+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- 
--	return 0;
-+	/* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
-+	ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
-+	ap136_ar8327_pad0_cfg.txclk_delay_en = true;
-+	ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
-+	ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+	ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-+
-+	/* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
-+	ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
-+	ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+	ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
-+
-+	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-+	ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+	ap136_common_setup();
-+	ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
- 
--static void __init ap136_pci_init(u8 *eeprom)
-+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-+	     "Atheros AP136-010 reference board",
-+	     ap136_010_setup);
-+
-+static void __init ap136_020_common_setup(void)
- {
--	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
--	       sizeof(ap136_ath9k_data.eeprom_data));
-+	/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
-+	ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
-+	ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
-+
-+	/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
-+	ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
-+	ap136_ar8327_pad6_cfg.txclk_delay_en = true;
-+	ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+	ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+	ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
- 
--	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
--	ath79_register_pci();
-+	ath79_eth0_pll_data.pll_1000 = 0x56000000;
-+	ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+	ap136_common_setup();
- }
--#else
--static inline void ap136_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
- 
--static void __init ap136_setup(void)
-+static void __init ap136_020_setup(void)
- {
- 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- 
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
--				 ap136_leds_gpio);
--	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(ap136_gpio_keys),
--					ap136_gpio_keys);
--	ath79_register_spi(&ap136_spi_data, ap136_spi_info,
--			   ARRAY_SIZE(ap136_spi_info));
--	ath79_register_usb();
--	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
--	ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-+	ap136_020_common_setup();
-+	ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
- 
--MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
--	     "Atheros AP136-010 reference board",
--	     ap136_setup);
-+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
-+	     "Atheros AP136-020 reference board",
-+	     ap136_020_setup);
-+
-+/*
-+ * AP135-020 is similar to AP136-020, any future AP135 specific init
-+ * code can be added here.
-+ */
-+static void __init ap135_020_setup(void)
-+{
-+	ap136_leds_gpio[0].name = "ap135:green:status";
-+	ap136_leds_gpio[1].name = "ap135:red:status";
-+	ap136_leds_gpio[2].name = "ap135:green:wps";
-+	ap136_leds_gpio[3].name = "ap135:red:wps";
-+	ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
-+	ap136_leds_gpio[5].name = "ap135:red:usb";
-+
-+	ap136_020_common_setup();
-+	ath79_register_pci();
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
-+	     "Atheros AP135-020 reference board",
-+	     ap135_020_setup);
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -16,16 +16,17 @@ config ATH79_MACH_AP121
- 	  Atheros AP121 reference board.
- 
- config ATH79_MACH_AP136
--	bool "Atheros AP136 reference board"
-+	bool "Atheros AP136/AP135 reference board"
- 	select SOC_QCA955X
- 	select ATH79_DEV_GPIO_BUTTONS
- 	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_NFC
- 	select ATH79_DEV_SPI
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
- 	help
- 	  Say 'Y' here if you want your kernel to support the
--	  Atheros AP136 reference board.
-+	  Atheros AP136 or AP135 reference boards.
- 
- config ATH79_MACH_AP81
- 	bool "Atheros AP81 reference board"