ar71xx: add v3.18 support

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44456 3c298f89-4303-0410-b956-a3cf2f4a3e73

82 files changed, 9042 insertions, 0 deletions

diff --git a/target/linux/ar71xx/patches-3.18/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch b/target/linux/ar71xx/patches-3.18/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch
new file mode 100644
index 0000000000..79c7ab01ab
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/102-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch
@@ -0,0 +1,42 @@
+From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001
+From: Markos Chandras <markos.chandras@imgtec.com>
+Date: Wed, 21 Aug 2013 11:47:22 +0100
+Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable
+
+Fixes the following build error:
+arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]
+arch/mips/ath79/common.c:62:6: note: 'reg' was declared here
+In file included from arch/mips/ath79/common.c:20:0:
+arch/mips/ath79/common.c: In function 'ath79_device_reset_clear':
+arch/mips/include/asm/mach-ath79/ath79.h:139:20:
+error: 'reg' may be used uninitialized in this function
+[-Werror=maybe-uninitialized]
+arch/mips/ath79/common.c:90:6: note: 'reg' was declared here
+
+Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
+Acked-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/common.c |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -75,7 +75,7 @@ void ath79_device_reset_set(u32 mask)
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
+ 	else
+-		BUG();
++		panic("Reset register not defined for this SOC");
+ 
+ 	spin_lock_irqsave(&ath79_device_reset_lock, flags);
+ 	t = ath79_reset_rr(reg);
+@@ -103,7 +103,7 @@ void ath79_device_reset_clear(u32 mask)
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
+ 	else
+-		BUG();
++		panic("Reset register not defined for this SOC");
+ 
+ 	spin_lock_irqsave(&ath79_device_reset_lock, flags);
+ 	t = ath79_reset_rr(reg);
diff --git a/target/linux/ar71xx/patches-3.18/206-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.18/206-spi-ath79-make-chipselect-logic-more-flexible.patch
new file mode 100644
index 0000000000..1d38986b63
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/206-spi-ath79-make-chipselect-logic-more-flexible.patch
@@ -0,0 +1,301 @@
+From 7008284716403237f6bc7d7590b3ed073555bd56 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 22:25:11 +0100
+Subject: [PATCH 34/34] spi/ath79: make chipselect logic more flexible
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/mach-ap121.c                       |    6 ++
+ arch/mips/ath79/mach-ap136.c                       |    6 ++
+ arch/mips/ath79/mach-ap81.c                        |    6 ++
+ arch/mips/ath79/mach-db120.c                       |    6 ++
+ arch/mips/ath79/mach-pb44.c                        |    6 ++
+ arch/mips/ath79/mach-ubnt-xm.c                     |    6 ++
+ .../include/asm/mach-ath79/ath79_spi_platform.h    |    8 ++-
+ drivers/spi/spi-ath79.c                            |   67 +++++++++++++-------
+ 8 files changed, 88 insertions(+), 23 deletions(-)
+
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi
+ 	}
+ };
+ 
++static struct ath79_spi_controller_data ap121_spi0_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++};
++
+ static struct spi_board_info ap121_spi_info[] = {
+ 	{
+ 		.bus_num	= 0,
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 25000000,
+ 		.modalias	= "mx25l1606e",
++		.controller_data = &ap121_spi0_data,
+ 	}
+ };
+ 
+--- a/arch/mips/ath79/mach-ap136.c
++++ b/arch/mips/ath79/mach-ap136.c
+@@ -98,12 +98,18 @@ static struct gpio_keys_button ap136_gpi
+ 	},
+ };
+ 
++static struct ath79_spi_controller_data ap136_spi0_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++};
++
+ static struct spi_board_info ap136_spi_info[] = {
+ 	{
+ 		.bus_num	= 0,
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 25000000,
+ 		.modalias	= "mx25l6405d",
++		.controller_data = &ap136_spi0_data,
+ 	}
+ };
+ 
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio
+ 	}
+ };
+ 
++static struct ath79_spi_controller_data ap81_spi0_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++};
++
+ static struct spi_board_info ap81_spi_info[] = {
+ 	{
+ 		.bus_num	= 0,
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 25000000,
+ 		.modalias	= "m25p64",
++		.controller_data = &ap81_spi0_data,
+ 	}
+ };
+ 
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi
+ 	},
+ };
+ 
++static struct ath79_spi_controller_data db120_spi0_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++};
++
+ static struct spi_board_info db120_spi_info[] = {
+ 	{
+ 		.bus_num	= 0,
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 25000000,
+ 		.modalias	= "s25sl064a",
++		.controller_data = &db120_spi0_data,
+ 	}
+ };
+ 
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio
+ 	}
+ };
+ 
++static struct ath79_spi_controller_data pb44_spi0_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+ 	{
+ 		.bus_num	= 0,
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 25000000,
+ 		.modalias	= "m25p64",
++		.controller_data = &pb44_spi0_data,
+ 	},
+ };
+ 
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g
+ 	}
+ };
+ 
++static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++};
++
+ static struct spi_board_info ubnt_xm_spi_info[] = {
+ 	{
+ 		.bus_num	= 0,
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 25000000,
+ 		.modalias	= "mx25l6405d",
++		.controller_data = &ubnt_xm_spi0_data,
+ 	}
+ };
+ 
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -16,8 +16,14 @@ struct ath79_spi_platform_data {
+ 	unsigned	num_chipselect;
+ };
+ 
++enum ath79_spi_cs_type {
++	ATH79_SPI_CS_TYPE_INTERNAL,
++	ATH79_SPI_CS_TYPE_GPIO,
++};
++
+ struct ath79_spi_controller_data {
+-	unsigned	gpio;
++	enum ath79_spi_cs_type cs_type;
++	unsigned cs_line;
+ };
+ 
+ #endif /* _ATH79_SPI_PLATFORM_H */
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -33,6 +33,8 @@
+ #define ATH79_SPI_RRW_DELAY_FACTOR	12000
+ #define MHZ				(1000 * 1000)
+ 
++#define ATH79_SPI_CS_LINE_MAX		2
++
+ struct ath79_spi {
+ 	struct spi_bitbang	bitbang;
+ 	u32			ioc_base;
+@@ -67,6 +69,7 @@ static void ath79_spi_chipselect(struct
+ {
+ 	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ 	int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
++	struct ath79_spi_controller_data *cdata = spi->controller_data;
+ 
+ 	if (is_active) {
+ 		/* set initial clock polarity */
+@@ -78,20 +81,24 @@ static void ath79_spi_chipselect(struct
+ 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+ 	}
+ 
+-	if (spi->chip_select) {
+-		struct ath79_spi_controller_data *cdata = spi->controller_data;
+-
+-		/* SPI is normally active-low */
+-		gpio_set_value(cdata->gpio, cs_high);
+-	} else {
++	switch (cdata->cs_type) {
++	case ATH79_SPI_CS_TYPE_INTERNAL:
+ 		if (cs_high)
+-			sp->ioc_base |= AR71XX_SPI_IOC_CS0;
++			sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
+ 		else
+-			sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
++			sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
+ 
+ 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+-	}
++		break;
+ 
++	case ATH79_SPI_CS_TYPE_GPIO:
++		/* SPI is normally active-low */
++		if (gpio_cansleep(cdata->cs_line))
++			gpio_set_value_cansleep(cdata->cs_line, cs_high);
++		else
++			gpio_set_value(cdata->cs_line, cs_high);
++		break;
++	}
+ }
+ 
+ static void ath79_spi_enable(struct ath79_spi *sp)
+@@ -118,24 +125,30 @@ static void ath79_spi_disable(struct ath
+ static int ath79_spi_setup_cs(struct spi_device *spi)
+ {
+ 	struct ath79_spi_controller_data *cdata;
++	unsigned long flags;
+ 	int status;
+ 
+ 	cdata = spi->controller_data;
+-	if (spi->chip_select && !cdata)
++	if (!cdata)
+ 		return -EINVAL;
+ 
+ 	status = 0;
+-	if (spi->chip_select) {
+-		unsigned long flags;
++	switch (cdata->cs_type) {
++	case ATH79_SPI_CS_TYPE_INTERNAL:
++		if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
++			status = -EINVAL;
++		break;
+ 
++	case ATH79_SPI_CS_TYPE_GPIO:
+ 		flags = GPIOF_DIR_OUT;
+ 		if (spi->mode & SPI_CS_HIGH)
+ 			flags |= GPIOF_INIT_LOW;
+ 		else
+ 			flags |= GPIOF_INIT_HIGH;
+ 
+-		status = gpio_request_one(cdata->gpio, flags,
++		status = gpio_request_one(cdata->cs_line, flags,
+ 					  dev_name(&spi->dev));
++		break;
+ 	}
+ 
+ 	return status;
+@@ -143,9 +156,19 @@ static int ath79_spi_setup_cs(struct spi
+ 
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+-	if (spi->chip_select) {
+-		struct ath79_spi_controller_data *cdata = spi->controller_data;
+-		gpio_free(cdata->gpio);
++	struct ath79_spi_controller_data *cdata;
++
++	cdata = spi->controller_data;
++	if (!cdata)
++		return;
++
++	switch (cdata->cs_type) {
++	case ATH79_SPI_CS_TYPE_INTERNAL:
++		/* nothing to do */
++		break;
++	case ATH79_SPI_CS_TYPE_GPIO:
++		gpio_free(cdata->cs_line);
++		break;
+ 	}
+ }
+ 
+@@ -210,6 +233,10 @@ static int ath79_spi_probe(struct platfo
+ 	unsigned long rate;
+ 	int ret;
+ 
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -EINVAL;
++
+ 	master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+ 	if (master == NULL) {
+ 		dev_err(&pdev->dev, "failed to allocate spi master\n");
+@@ -219,15 +246,11 @@ static int ath79_spi_probe(struct platfo
+ 	sp = spi_master_get_devdata(master);
+ 	platform_set_drvdata(pdev, sp);
+ 
+-	pdata = dev_get_platdata(&pdev->dev);
+-
+ 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+ 	master->setup = ath79_spi_setup;
+ 	master->cleanup = ath79_spi_cleanup;
+-	if (pdata) {
+-		master->bus_num = pdata->bus_num;
+-		master->num_chipselect = pdata->num_chipselect;
+-	}
++	master->bus_num = pdata->bus_num;
++	master->num_chipselect = pdata->num_chipselect;
+ 
+ 	sp->bitbang.master = master;
+ 	sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ar71xx/patches-3.18/213-MIPS-ath79-fix-ar933x-wmac-reset.patch b/target/linux/ar71xx/patches-3.18/213-MIPS-ath79-fix-ar933x-wmac-reset.patch
new file mode 100644
index 0000000000..e0821a7776
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/213-MIPS-ath79-fix-ar933x-wmac-reset.patch
@@ -0,0 +1,31 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -62,10 +62,27 @@ static void __init ar913x_wmac_setup(voi
+ 
+ static int ar933x_wmac_reset(void)
+ {
++	int retries = 20;
++
+ 	ath79_device_reset_set(AR933X_RESET_WMAC);
+ 	ath79_device_reset_clear(AR933X_RESET_WMAC);
+ 
+-	return 0;
++	while (1) {
++		u32 bootstrap;
++
++		bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++		if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
++			return 0;
++
++		if (retries-- == 0)
++			break;
++
++		udelay(10000);
++		retries++;
++	}
++
++	pr_err("ar933x: WMAC reset timed out");
++	return -ETIMEDOUT;
+ }
+ 
+ static int ar933x_r1_get_wmac_revision(void)
diff --git a/target/linux/ar71xx/patches-3.18/220-add_cpu_feature_overrides.patch b/target/linux/ar71xx/patches-3.18/220-add_cpu_feature_overrides.patch
new file mode 100644
index 0000000000..d925f92624
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/220-add_cpu_feature_overrides.patch
@@ -0,0 +1,28 @@
+--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
++++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+@@ -36,6 +36,7 @@
+ #define cpu_has_mdmx		0
+ #define cpu_has_mips3d		0
+ #define cpu_has_smartmips	0
++#define cpu_has_rixi		0
+ 
+ #define cpu_has_mips32r1	1
+ #define cpu_has_mips32r2	1
+@@ -43,6 +44,7 @@
+ #define cpu_has_mips64r2	0
+ 
+ #define cpu_has_mipsmt		0
++#define cpu_has_userlocal	0
+ 
+ #define cpu_has_64bits		0
+ #define cpu_has_64bit_zero_reg	0
+@@ -51,5 +53,9 @@
+ 
+ #define cpu_dcache_line_size()	32
+ #define cpu_icache_line_size()	32
++#define cpu_has_vtag_icache	0
++#define cpu_has_dc_aliases	1
++#define cpu_has_ic_fills_f_dc	0
++#define cpu_has_pindexed_dcache	0
+ 
+ #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/ar71xx/patches-3.18/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch b/target/linux/ar71xx/patches-3.18/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch
new file mode 100644
index 0000000000..0bc64b7a17
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch
@@ -0,0 +1,21 @@
+--- a/arch/mips/include/asm/mips_machine.h
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty
+ 	.mach_setup	= _setup,				\
+ };
+ 
++#define MIPS_MACHINE_NONAME(_type, _id, _setup)		\
++static const char machine_id_##_type[] __initconst		\
++			__aligned(1) = _id;			\
++static struct mips_machine machine_##_type			\
++		__used __section(.mips.machines.init) =		\
++{								\
++	.mach_type	= _type,				\
++	.mach_id	= machine_id_##_type,			\
++	.mach_name	= NULL,					\
++	.mach_setup	= _setup,				\
++};
++
+ extern long __mips_machines_start;
+ extern long __mips_machines_end;
+ 
diff --git a/target/linux/ar71xx/patches-3.18/310-lib-add-rle-decompression.patch b/target/linux/ar71xx/patches-3.18/310-lib-add-rle-decompression.patch
new file mode 100644
index 0000000000..171dbcfbb9
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/310-lib-add-rle-decompression.patch
@@ -0,0 +1,124 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -233,6 +233,9 @@ config LZMA_COMPRESS
+ config LZMA_DECOMPRESS
+     tristate
+ 
++config RLE_DECOMPRESS
++	tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -97,6 +97,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
+ obj-$(CONFIG_RAID6_PQ) += raid6/
+ obj-$(CONFIG_LZMA_COMPRESS) += lzma/
+ obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
++obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
+ 
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/include/linux/rle.h
+@@ -0,0 +1,18 @@
++#ifndef _RLE_H_
++#define _RLE_H_
++
++#ifdef CONFIG_RLE_DECOMPRESS
++int rle_decode(const unsigned char *src, size_t srclen,
++	       unsigned char *dst, size_t dstlen,
++	       size_t *src_done, size_t *dst_done);
++#else
++static inline int
++rle_decode(const unsigned char *src, size_t srclen,
++	   unsigned char *dst, size_t dstlen,
++	   size_t *src_done, size_t *dst_done)
++{
++	return -ENOTSUPP;
++}
++#endif /* CONFIG_RLE_DECOMPRESS */
++
++#endif /* _RLE_H_ */
+--- /dev/null
++++ b/lib/rle.c
+@@ -0,0 +1,78 @@
++/*
++ *  RLE decoding routine
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/rle.h>
++
++int rle_decode(const unsigned char *src, size_t srclen,
++	       unsigned char *dst, size_t dstlen,
++	       size_t *src_done, size_t *dst_done)
++{
++	size_t srcpos, dstpos;
++	int ret;
++
++	srcpos = 0;
++	dstpos = 0;
++	ret = -EINVAL;
++
++	/* sanity checks */
++	if (!src || !srclen || !dst || !dstlen)
++		goto out;
++
++	while (1) {
++		char count;
++
++		if (srcpos >= srclen)
++			break;
++
++		count = (char) src[srcpos++];
++		if (count == 0) {
++			ret = 0;
++			break;
++		}
++
++		if (count > 0) {
++			unsigned char c;
++
++			if (srcpos >= srclen)
++				break;
++
++			c = src[srcpos++];
++
++			while (count--) {
++				if (dstpos >= dstlen)
++					break;
++
++				dst[dstpos++] = c;
++			}
++		} else {
++			count *= -1;
++
++			while (count--) {
++				if (srcpos >= srclen)
++					break;
++				if (dstpos >= dstlen)
++					break;
++				dst[dstpos++] = src[srcpos++];
++			}
++		}
++	}
++
++out:
++	if (src_done)
++		*src_done = srcpos;
++	if (dst_done)
++		*dst_done = dstpos;
++
++	return ret;
++}
++
++EXPORT_SYMBOL_GPL(rle_decode);
diff --git a/target/linux/ar71xx/patches-3.18/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-3.18/401-mtd-physmap-add-lock-unlock.patch
new file mode 100644
index 0000000000..db7b3ca83d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/401-mtd-physmap-add-lock-unlock.patch
@@ -0,0 +1,94 @@
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -31,6 +31,66 @@ struct physmap_flash_info {
+ 	int			vpp_refcnt;
+ };
+ 
++static struct platform_device *physmap_map2pdev(struct map_info *map)
++{
++	return (struct platform_device *) map->map_priv_1;
++}
++
++static void physmap_lock(struct map_info *map)
++{
++	struct platform_device *pdev;
++	struct physmap_flash_data *physmap_data;
++
++	pdev = physmap_map2pdev(map);
++	physmap_data = pdev->dev.platform_data;
++	physmap_data->lock(pdev);
++}
++
++static void physmap_unlock(struct map_info *map)
++{
++	struct platform_device *pdev;
++	struct physmap_flash_data *physmap_data;
++
++	pdev = physmap_map2pdev(map);
++	physmap_data = pdev->dev.platform_data;
++	physmap_data->unlock(pdev);
++}
++
++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
++{
++	map_word ret;
++
++	physmap_lock(map);
++	ret = inline_map_read(map, ofs);
++	physmap_unlock(map);
++
++	return ret;
++}
++
++static void physmap_flash_write_lock(struct map_info *map, map_word d,
++				     unsigned long ofs)
++{
++	physmap_lock(map);
++	inline_map_write(map, d, ofs);
++	physmap_unlock(map);
++}
++
++static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
++					 unsigned long from, ssize_t len)
++{
++	physmap_lock(map);
++	inline_map_copy_from(map, to, from, len);
++	physmap_unlock(map);
++}
++
++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
++				       const void *from, ssize_t len)
++{
++	physmap_lock(map);
++	inline_map_copy_to(map, to, from, len);
++	physmap_unlock(map);
++}
++
+ static int physmap_flash_remove(struct platform_device *dev)
+ {
+ 	struct physmap_flash_info *info;
+@@ -153,6 +213,13 @@ static int physmap_flash_probe(struct pl
+ 
+ 		simple_map_init(&info->map[i]);
+ 
++		if (physmap_data->lock && physmap_data->unlock) {
++			info->map[i].read = physmap_flash_read_lock;
++			info->map[i].write = physmap_flash_write_lock;
++			info->map[i].copy_from = physmap_flash_copy_from_lock;
++			info->map[i].copy_to = physmap_flash_copy_to_lock;
++		}
++
+ 		probe_type = rom_probe_types;
+ 		if (physmap_data->probe_type == NULL) {
+ 			for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -25,6 +25,8 @@ struct physmap_flash_data {
+ 	unsigned int		width;
+ 	int			(*init)(struct platform_device *);
+ 	void			(*exit)(struct platform_device *);
++	void			(*lock)(struct platform_device *);
++	void			(*unlock)(struct platform_device *);
+ 	void			(*set_vpp)(struct platform_device *, int);
+ 	unsigned int		nr_parts;
+ 	unsigned int		pfow_base;
diff --git a/target/linux/ar71xx/patches-3.18/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-3.18/402-mtd-SST39VF6401B-support.patch
new file mode 100644
index 0000000000..0d483ab1a4
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/402-mtd-SST39VF6401B-support.patch
@@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -148,6 +148,7 @@
+ #define SST39LF160	0x2782
+ #define SST39VF1601	0x234b
+ #define SST39VF3201	0x235b
++#define SST39VF6401B	0x236d
+ #define SST39WF1601	0x274b
+ #define SST39WF1602	0x274a
+ #define SST39LF512	0x00D4
+@@ -1569,6 +1570,18 @@ static const struct amd_flash_info jedec
+ 			ERASEINFO(0x10000,64),
+ 		}
+ 	}, {
++		.mfr_id         = CFI_MFR_SST,
++		.dev_id         = SST39VF6401B,
++		.name           = "SST 39VF6401B",
++		.devtypes       = CFI_DEVICETYPE_X16,
++		.uaddr          = MTD_UADDR_0xAAAA_0x5555,
++		.dev_size       = SIZE_8MiB,
++		.cmd_set        = P_ID_AMD_STD,
++		.nr_regions     = 1,
++		.regions        = {
++			ERASEINFO(0x10000,128)
++		}
++	}, {
+ 		.mfr_id		= CFI_MFR_ST,
+ 		.dev_id		= M29F800AB,
+ 		.name		= "ST M29F800AB",
diff --git a/target/linux/ar71xx/patches-3.18/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-3.18/403-mtd_fix_cfi_cmdset_0002_status_check.patch
new file mode 100644
index 0000000000..1ccce4ecec
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/403-mtd_fix_cfi_cmdset_0002_status_check.patch
@@ -0,0 +1,69 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1632,8 +1632,8 @@ static int __xipram do_write_oneword(str
+ 			break;
+ 		}
+ 
+-		if (chip_ready(map, adr))
+-			break;
++		if (chip_good(map, adr, datum))
++			goto enable_xip;
+ 
+ 		/* Latency issues. Drop the lock, wait a while and retry */
+ 		UDELAY(map, chip, adr, 1);
+@@ -1649,6 +1649,8 @@ static int __xipram do_write_oneword(str
+ 
+ 		ret = -EIO;
+ 	}
++
++ enable_xip:
+ 	xip_enable(map, chip, adr);
+  op_done:
+ 	if (mode == FL_OTP_WRITE)
+@@ -2227,7 +2229,6 @@ static int cfi_amdstd_panic_write(struct
+ 	return 0;
+ }
+ 
+-
+ /*
+  * Handle devices with one erase region, that only implement
+  * the chip erase command.
+@@ -2291,8 +2292,8 @@ static int __xipram do_erase_chip(struct
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr))
+-			break;
++		if (chip_good(map, adr, map_word_ff(map)))
++			goto op_done;
+ 
+ 		if (time_after(jiffies, timeo)) {
+ 			printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -2312,6 +2313,7 @@ static int __xipram do_erase_chip(struct
+ 		ret = -EIO;
+ 	}
+ 
++ op_done:
+ 	chip->state = FL_READY;
+ 	xip_enable(map, chip, adr);
+ 	DISABLE_VPP(map);
+@@ -2380,9 +2382,9 @@ static int __xipram do_erase_oneblock(st
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr)) {
++		if (chip_good(map, adr, map_word_ff(map))) {
+ 			xip_enable(map, chip, adr);
+-			break;
++			goto op_done;
+ 		}
+ 
+ 		if (time_after(jiffies, timeo)) {
+@@ -2404,6 +2406,7 @@ static int __xipram do_erase_oneblock(st
+ 		ret = -EIO;
+ 	}
+ 
++ op_done:
+ 	chip->state = FL_READY;
+ 	DISABLE_VPP(map);
+ 	put_chip(map, chip, adr);
diff --git a/target/linux/ar71xx/patches-3.18/404-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-3.18/404-mtd-wrt160nl-trx-parser.patch
new file mode 100644
index 0000000000..e49d72eb4f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/404-mtd-wrt160nl-trx-parser.patch
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -184,6 +184,12 @@ config MTD_BCM47XX_PARTS
+ 	  This provides partitions parser for devices based on BCM47xx
+ 	  boards.
+ 
++config MTD_WRT160NL_PARTS
++	tristate "Linksys WRT160NL partitioning support"
++	depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++	---help---
++	   Linksys WRT160NL partitioning support
++
+ config MTD_MYLOADER_PARTS
+ 	tristate "MyLoader partition parsing"
+ 	depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
diff --git a/target/linux/ar71xx/patches-3.18/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-3.18/405-mtd-tp-link-partition-parser.patch
new file mode 100644
index 0000000000..0688bb896e
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/405-mtd-tp-link-partition-parser.patch
@@ -0,0 +1,34 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -186,7 +186,7 @@ config MTD_BCM47XX_PARTS
+ 
+ config MTD_WRT160NL_PARTS
+ 	tristate "Linksys WRT160NL partitioning support"
+-	depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++	depends on ATH79_MACH_WRT160NL
+ 	---help---
+ 	   Linksys WRT160NL partitioning support
+ 
+@@ -206,6 +206,12 @@ config MTD_MYLOADER_PARTS
+ 	  You will still need the parsing functions to be called by the driver
+ 	  for your particular device. It won't happen automatically.
+ 
++config MTD_TPLINK_PARTS
++	tristate "TP-Link AR7XXX/AR9XXX partitioning support"
++	depends on ATH79
++	---help---
++	  TBD.
++
+ comment "User Modules And Translation Layers"
+ 
+ #
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_TPLINK_PARTS)	+= tplinkpart.o
+ obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ 
+ # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/ar71xx/patches-3.18/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-3.18/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
new file mode 100644
index 0000000000..568f5161b1
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -246,7 +246,9 @@ static int m25p_probe(struct spi_device
+ 
+ 	ppdata.of_node = spi->dev.of_node;
+ 
+-	return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
++	return mtd_device_parse_register(&flash->mtd,
++			data ? data->part_probes : NULL,
++			&ppdata,
+ 			data ? data->parts : NULL,
+ 			data ? data->nr_parts : 0);
+ }
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -24,6 +24,7 @@ struct flash_platform_data {
+ 	unsigned int	nr_parts;
+ 
+ 	char		*type;
++	const char	**part_probes;
+ 
+ 	/* we'll likely add more ... use JEDEC IDs, etc */
+ };
diff --git a/target/linux/ar71xx/patches-3.18/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-3.18/408-mtd-redboot_partition_scan.patch
new file mode 100644
index 0000000000..cd41e7ceb2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/408-mtd-redboot_partition_scan.patch
@@ -0,0 +1,44 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru
+ 	static char nullstring[] = "unallocated";
+ #endif
+ 
++	buf = vmalloc(master->erasesize);
++	if (!buf)
++		return -ENOMEM;
++
++ restart:
+ 	if ( directory < 0 ) {
+ 		offset = master->size + directory * master->erasesize;
+ 		while (mtd_block_isbad(master, offset)) {
+ 			if (!offset) {
+ 			nogood:
+ 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++				vfree(buf);
+ 				return -EIO;
+ 			}
+ 			offset -= master->erasesize;
+@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru
+ 				goto nogood;
+ 		}
+ 	}
+-	buf = vmalloc(master->erasesize);
+-
+-	if (!buf)
+-		return -ENOMEM;
+ 
+ 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ 	       master->name, offset);
+@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru
+ 	}
+ 	if (i == numslots) {
+ 		/* Didn't find it */
++		if (offset + master->erasesize < master->size) {
++			/* not at the end of the flash yet, maybe next block :) */
++			directory++;
++			goto restart;
++		}
+ 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ 		       master->name);
+ 		ret = 0;
diff --git a/target/linux/ar71xx/patches-3.18/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-3.18/409-mtd-rb4xx_nand_driver.patch
new file mode 100644
index 0000000000..77e43268f3
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/409-mtd-rb4xx_nand_driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -516,4 +516,8 @@ config MTD_NAND_XWAY
+ 	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+ 	  to the External Bus Unit (EBU).
+ 
++config MTD_NAND_RB4XX
++	tristate "NAND flash driver for RouterBoard 4xx series"
++	depends on MTD_NAND && ATH79_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
diff --git a/target/linux/ar71xx/patches-3.18/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-3.18/410-mtd-rb750-nand-driver.patch
new file mode 100644
index 0000000000..cd2b6b1e81
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/410-mtd-rb750-nand-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -520,4 +520,8 @@ config MTD_NAND_RB4XX
+ 	tristate "NAND flash driver for RouterBoard 4xx series"
+ 	depends on MTD_NAND && ATH79_MACH_RB4XX
+ 
++config MTD_NAND_RB750
++	tristate "NAND flash driver for the RouterBoard 750"
++	depends on MTD_NAND && ATH79_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
diff --git a/target/linux/ar71xx/patches-3.18/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-3.18/411-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644
index 0000000000..39c5478182
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/411-mtd-cfi_cmdset_0002-force-word-write.patch
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -40,7 +40,7 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+ #define MAX_WORD_RETRIES 3
+ 
+@@ -51,7 +51,9 @@
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+ 
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ 	struct map_info *map = mtd->priv;
+@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru
+ 		mtd->_write = cfi_amdstd_write_buffers;
+ 	}
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1791,6 +1795,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ 				    unsigned long adr, const u_char *buf,
+ 				    int len)
+@@ -1919,7 +1924,6 @@ static int __xipram do_write_buffer(stru
+ 	return ret;
+ }
+ 
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ 				    size_t *retlen, const u_char *buf)
+ {
+@@ -1994,6 +1998,7 @@ static int cfi_amdstd_write_buffers(stru
+ 
+ 	return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /*
+  * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ar71xx/patches-3.18/412-mtd-m25p80-zero-partition-parser-data.patch b/target/linux/ar71xx/patches-3.18/412-mtd-m25p80-zero-partition-parser-data.patch
new file mode 100644
index 0000000000..d51694d9fd
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/412-mtd-m25p80-zero-partition-parser-data.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -244,6 +244,7 @@ static int m25p_probe(struct spi_device
+ 	if (ret)
+ 		return ret;
+ 
++	memset(&ppdata, '\0', sizeof(ppdata));
+ 	ppdata.of_node = spi->dev.of_node;
+ 
+ 	return mtd_device_parse_register(&flash->mtd,
diff --git a/target/linux/ar71xx/patches-3.18/413-mtd-ar934x-nand-driver.patch b/target/linux/ar71xx/patches-3.18/413-mtd-ar934x-nand-driver.patch
new file mode 100644
index 0000000000..5190383110
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/413-mtd-ar934x-nand-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -524,4 +524,12 @@ config MTD_NAND_RB750
+ 	tristate "NAND flash driver for the RouterBoard 750"
+ 	depends on MTD_NAND && ATH79_MACH_RB750
+ 
++config MTD_NAND_AR934X
++	tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
++	depends on (SOC_AR934X || SOC_QCA955X)
++
++config MTD_NAND_AR934X_HW_ECC
++	bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)"
++	depends on MTD_NAND_AR934X
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-
+ obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
+ obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
+ obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o
++obj-$(CONFIG_MTD_NAND_AR934X)		+= ar934x_nfc.o
+ obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
+ obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
+ obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
diff --git a/target/linux/ar71xx/patches-3.18/414-mtd-rb91x-nand-driver.patch b/target/linux/ar71xx/patches-3.18/414-mtd-rb91x-nand-driver.patch
new file mode 100644
index 0000000000..174bb8b4bd
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/414-mtd-rb91x-nand-driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -524,6 +524,10 @@ config MTD_NAND_RB750
+ 	tristate "NAND flash driver for the RouterBoard 750"
+ 	depends on MTD_NAND && ATH79_MACH_RB750
+ 
++config MTD_NAND_RB91X
++	tristate "NAND flash driver for the RouterBOARD 91x series"
++	depends on MTD_NAND && ATH79_MACH_RB91X
++
+ config MTD_NAND_AR934X
+ 	tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
+ 	depends on (SOC_AR934X || SOC_QCA955X)
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nan
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
+ obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
++obj-$(CONFIG_MTD_NAND_RB91X)		+= rb91x_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
diff --git a/target/linux/ar71xx/patches-3.18/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-3.18/420-net-ar71xx_mac_driver.patch
new file mode 100644
index 0000000000..5da869a132
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/420-net-ar71xx_mac_driver.patch
@@ -0,0 +1,28 @@
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+ 	bool "Atheros devices"
+ 	default y
+-	depends on PCI
++	depends on (PCI || ATH79)
+ 	---help---
+ 	  If you have a network (Ethernet) card belonging to this class, say Y
+ 	  and read the Ethernet-HOWTO, available from
+@@ -80,4 +80,6 @@ config ALX
+ 	  To compile this driver as a module, choose M here.  The module
+ 	  will be called alx.
+ 
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -2,6 +2,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
+ 
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ar71xx/patches-3.18/422-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-3.18/422-dsa-trailer-tag-validation-fix.patch
new file mode 100644
index 0000000000..b58aeedc38
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/422-dsa-trailer-tag-validation-fix.patch
@@ -0,0 +1,11 @@
+--- a/net/dsa/tag_trailer.c
++++ b/net/dsa/tag_trailer.c
+@@ -86,7 +86,7 @@ static int trailer_rcv(struct sk_buff *s
+ 
+ 	trailer = skb_tail_pointer(skb) - 4;
+ 	if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+-	    (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
++	    (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+ 		goto out_drop;
+ 
+ 	source_port = trailer[1] & 7;
diff --git a/target/linux/ar71xx/patches-3.18/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-3.18/423-dsa-add-88e6063-driver.patch
new file mode 100644
index 0000000000..1348cd9b04
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/423-dsa-add-88e6063-driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
+@@ -13,6 +13,13 @@ config NET_DSA_MV88E6060
+ 	  This enables support for the Marvell 88E6060 ethernet switch
+ 	  chip.
+ 
++config NET_DSA_MV88E6063
++	bool "Marvell 88E6063 ethernet switch chip support"
++	select NET_DSA_TAG_TRAILER
++	---help---
++	  This enables support for the Marvell 88E6063 ethernet switch
++	  chip
++
+ config NET_DSA_MV88E6XXX_NEED_PPU
+ 	bool
+ 	default n
+--- a/drivers/net/dsa/Makefile
++++ b/drivers/net/dsa/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
+ mv88e6xxx_drv-y += mv88e6xxx.o
+ ifdef CONFIG_NET_DSA_MV88E6123_61_65
diff --git a/target/linux/ar71xx/patches-3.18/425-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/ar71xx/patches-3.18/425-net-phy-at803x-allow-to-configure-via-pdata.patch
new file mode 100644
index 0000000000..babc695ce9
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/425-net-phy-at803x-allow-to-configure-via-pdata.patch
@@ -0,0 +1,135 @@
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -12,12 +12,14 @@
+  */
+ 
+ #include <linux/phy.h>
++#include <linux/mdio.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+ #include <linux/of_gpio.h>
+ #include <linux/gpio/consumer.h>
++#include <linux/platform_data/phy-at803x.h>
+ 
+ #define AT803X_INTR_ENABLE			0x12
+ #define AT803X_INTR_STATUS			0x13
+@@ -34,8 +36,16 @@
+ #define AT803X_INER				0x0012
+ #define AT803X_INER_INIT			0xec00
+ #define AT803X_INSR				0x0013
++
++#define AT803X_PCS_SMART_EEE_CTRL3			0x805D
++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT	12
++#define AT803X_SMART_EEE_CTRL3_LPI_EN			BIT(8)
++
+ #define AT803X_DEBUG_ADDR			0x1D
+ #define AT803X_DEBUG_DATA			0x1E
++#define AT803X_DBG0_REG				0x00
++#define AT803X_DEBUG_RGMII_RX_CLK_DLY		BIT(8)
+ #define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
+ #define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
+ 
+@@ -61,6 +71,43 @@ struct at803x_context {
+ 	u16 led_control;
+ };
+ 
++static u16
++at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set)
++{
++	struct mii_bus *bus = phydev->bus;
++	int val;
++
++	mutex_lock(&bus->mdio_lock);
++
++	bus->write(bus, phydev->addr, AT803X_DEBUG_ADDR, reg);
++	val = bus->read(bus, phydev->addr, AT803X_DEBUG_DATA);
++	if (val < 0) {
++		val = 0xffff;
++		goto out;
++	}
++
++	val &= ~clear;
++	val |= set;
++	bus->write(bus, phydev->addr, AT803X_DEBUG_DATA, val);
++
++out:
++	mutex_unlock(&bus->mdio_lock);
++	return val;
++}
++
++static inline void
++at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set)
++{
++	at803x_dbg_reg_rmw(phydev, reg, 0, set);
++}
++
++static inline void
++at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear)
++{
++	at803x_dbg_reg_rmw(phydev, reg, clear, 0);
++}
++
++
+ /* save relevant PHY registers to private copy */
+ static void at803x_context_save(struct phy_device *phydev,
+ 				struct at803x_context *context)
+@@ -208,8 +255,16 @@ static int at803x_probe(struct phy_devic
+ 	return 0;
+ }
+ 
++static void at803x_disable_smarteee(struct phy_device *phydev)
++{
++	phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
++		1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
++	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
++}
++
+ static int at803x_config_init(struct phy_device *phydev)
+ {
++	struct at803x_platform_data *pdata;
+ 	int ret;
+ 
+ 	ret = genphy_config_init(phydev);
+@@ -227,6 +282,26 @@ static int at803x_config_init(struct phy
+ 			return ret;
+ 	}
+ 
++	pdata = dev_get_platdata(&phydev->dev);
++	if (pdata) {
++		if (pdata->disable_smarteee)
++			at803x_disable_smarteee(phydev);
++
++		if (pdata->enable_rgmii_rx_delay)
++			at803x_dbg_reg_set(phydev, AT803X_DBG0_REG,
++				AT803X_DEBUG_RGMII_RX_CLK_DLY);
++		else
++			at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG,
++				AT803X_DEBUG_RGMII_RX_CLK_DLY);
++
++		if (pdata->enable_rgmii_tx_delay)
++			at803x_dbg_reg_set(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
++				AT803X_DEBUG_RGMII_TX_CLK_DLY);
++		else
++			at803x_dbg_reg_clr(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
++				AT803X_DEBUG_RGMII_TX_CLK_DLY);
++	}
++
+ 	return 0;
+ }
+ 
+--- /dev/null
++++ b/include/linux/platform_data/phy-at803x.h
+@@ -0,0 +1,10 @@
++#ifndef _PHY_AT803X_PDATA_H
++#define _PHY_AT803X_PDATA_H
++
++struct at803x_platform_data {
++       int disable_smarteee:1;
++       int enable_rgmii_tx_delay:1;
++       int enable_rgmii_rx_delay:1;
++};
++
++#endif /* _PHY_AT803X_PDATA_H */
diff --git a/target/linux/ar71xx/patches-3.18/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-3.18/430-drivers-link-spi-before-mtd.patch
new file mode 100644
index 0000000000..22b701bf38
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/430-drivers-link-spi-before-mtd.patch
@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -68,8 +68,8 @@ obj-$(CONFIG_IDE)		+= ide/
+ obj-$(CONFIG_SCSI)		+= scsi/
+ obj-$(CONFIG_ATA)		+= ata/
+ obj-$(CONFIG_TARGET_CORE)	+= target/
+-obj-$(CONFIG_MTD)		+= mtd/
+ obj-$(CONFIG_SPI)		+= spi/
++obj-$(CONFIG_MTD)		+= mtd/
+ obj-$(CONFIG_SPMI)		+= spmi/
+ obj-y				+= hsi/
+ obj-y				+= net/
diff --git a/target/linux/ar71xx/patches-3.18/431-spi-add-various-flags.patch b/target/linux/ar71xx/patches-3.18/431-spi-add-various-flags.patch
new file mode 100644
index 0000000000..91a4ff34c5
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/431-spi-add-various-flags.patch
@@ -0,0 +1,19 @@
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -620,6 +620,8 @@ struct spi_transfer {
+ 	unsigned	cs_change:1;
+ 	unsigned	tx_nbits:3;
+ 	unsigned	rx_nbits:3;
++	unsigned	verify:1;
++	unsigned	fast_write:1;
+ #define	SPI_NBITS_SINGLE	0x01 /* 1bit transfer */
+ #define	SPI_NBITS_DUAL		0x02 /* 2bits transfer */
+ #define	SPI_NBITS_QUAD		0x04 /* 4bits transfer */
+@@ -665,6 +667,7 @@ struct spi_message {
+ 	struct spi_device	*spi;
+ 
+ 	unsigned		is_dma_mapped:1;
++	unsigned		fast_read:1;
+ 
+ 	/* REVISIT:  we might want a flag affecting the behavior of the
+ 	 * last transfer ... allowing things like "read 16 bit length L"
diff --git a/target/linux/ar71xx/patches-3.18/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-3.18/432-spi-rb4xx-spi-driver.patch
new file mode 100644
index 0000000000..27159b3bb2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/432-spi-rb4xx-spi-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -433,6 +433,12 @@ config SPI_QUP
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called spi_qup.
+ 
++config SPI_RB4XX
++	tristate "Mikrotik RB4XX SPI master"
++	depends on SPI_MASTER && ATH79_MACH_RB4XX
++	help
++	  SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+ 	tristate "Samsung S3C24XX series SPI"
+ 	depends on ARCH_S3C24XX
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -62,6 +62,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
+ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA)	+= spi-pxa2xx-dma.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
+ obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
+ obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
+ obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
diff --git a/target/linux/ar71xx/patches-3.18/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.18/433-spi-rb4xx-cpld-driver.patch
new file mode 100644
index 0000000000..47f0c2421d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/433-spi-rb4xx-cpld-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -647,6 +647,13 @@ config SPI_TLE62X0
+ 	  sysfs interface, with each line presented as a kind of GPIO
+ 	  exposing both switch control and diagnostic feedback.
+ 
++config SPI_RB4XX_CPLD
++	tristate "MikroTik RB4XX CPLD driver"
++	depends on ATH79_MACH_RB4XX
++	help
++	  SPI driver for the Xilinx CPLD chip present on the
++	  MikroTik RB4xx boards.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -63,6 +63,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
+ obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
+ obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
++obj-$(CONFIG_SPI_RB4XX_CPLD)		+= spi-rb4xx-cpld.o
+ obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
+ obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
+ obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
diff --git a/target/linux/ar71xx/patches-3.18/434-spi-ap83_spi_controller.patch b/target/linux/ar71xx/patches-3.18/434-spi-ap83_spi_controller.patch
new file mode 100644
index 0000000000..a67e8084a2
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/434-spi-ap83_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV)		+= spidev.o
+ # SPI master controller drivers (bus)
+ obj-$(CONFIG_SPI_ALTERA)		+= spi-altera.o
+ obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
++obj-$(CONFIG_SPI_AP83)			+= spi-ap83.o
+ obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
+ obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
+ obj-$(CONFIG_SPI_BCM2835)		+= spi-bcm2835.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -59,6 +59,14 @@ config SPI_ALTERA
+ 	help
+ 	  This is the driver for the Altera SPI Controller.
+ 
++config SPI_AP83
++	tristate "Atheros AP83 specific SPI Controller"
++	depends on SPI_MASTER && ATH79_MACH_AP83
++	select SPI_BITBANG
++	help
++	  This is a specific SPI controller driver for the Atheros AP83
++	  reference board.
++
+ config SPI_ATH79
+ 	tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
+ 	depends on ATH79 && GPIOLIB
diff --git a/target/linux/ar71xx/patches-3.18/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-3.18/435-spi-vsc7385_driver.patch
new file mode 100644
index 0000000000..95c77dfe15
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/435-spi-vsc7385_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -662,6 +662,11 @@ config SPI_RB4XX_CPLD
+ 	  SPI driver for the Xilinx CPLD chip present on the
+ 	  MikroTik RB4xx boards.
+ 
++config SPI_VSC7385
++	tristate "Vitesse VSC7385 ethernet switch driver"
++	help
++	  SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -86,6 +86,7 @@ obj-$(CONFIG_SPI_TEGRA20_SLINK)		+= spi-
+ obj-$(CONFIG_SPI_TLE62X0)		+= spi-tle62x0.o
+ obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
++obj-$(CONFIG_SPI_VSC7385)		+= spi-vsc7385.o
+ obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
+ obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
+ obj-$(CONFIG_SPI_XTENSA_XTFPGA)		+= spi-xtensa-xtfpga.o
diff --git a/target/linux/ar71xx/patches-3.18/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-3.18/440-leds-wndr3700-usb-led-driver.patch
new file mode 100644
index 0000000000..6e4fe24d3a
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/440-leds-wndr3700-usb-led-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -505,6 +505,13 @@ config LEDS_VERSATILE
+ 	  This option enabled support for the LEDs on the ARM Versatile
+ 	  and RealView boards. Say Y to enabled these.
+ 
++config LEDS_WNDR3700_USB
++	tristate "NETGEAR WNDR3700 USB LED driver"
++	depends on LEDS_CLASS && ATH79_MACH_WNDR3700
++	help
++	  This option enables support for the USB LED found on the
++	  NETGEAR WNDR3700 board.
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+ 
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -41,6 +41,7 @@ obj-$(CONFIG_LEDS_DA9052)		+= leds-da905
+ obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB}		+= leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
diff --git a/target/linux/ar71xx/patches-3.18/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-3.18/441-leds-rb750-led-driver.patch
new file mode 100644
index 0000000000..714ab0c5ea
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/441-leds-rb750-led-driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -512,6 +512,10 @@ config LEDS_WNDR3700_USB
+ 	  This option enables support for the USB LED found on the
+ 	  NETGEAR WNDR3700 board.
+ 
++config LEDS_RB750
++	tristate "LED driver for the Mikrotik RouterBOARD 750"
++	depends on LEDS_CLASS && ATH79_MACH_RB750
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+ 
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -48,6 +48,7 @@ obj-$(CONFIG_LEDS_LT3593)		+= leds-lt359
+ obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
+ obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
++obj-$(CONFIG_LEDS_RB750)		+= leds-rb750.o
+ obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
+ obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
diff --git a/target/linux/ar71xx/patches-3.18/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-3.18/450-gpio-nxp-74hc153-gpio-chip-driver.patch
new file mode 100644
index 0000000000..3cf5755dfc
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/450-gpio-nxp-74hc153-gpio-chip-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -905,4 +905,12 @@ config GPIO_VIPERBOARD
+           River Tech's viperboard.h for detailed meaning
+           of the module parameters.
+ 
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++	tristate "NXP 74HC153 Dual 4-input multiplexer"
++	help
++	  Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++	  provides a GPIO interface supporting input mode only.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -60,6 +60,7 @@ obj-$(CONFIG_GPIO_MSM_V2)	+= gpio-msm-v2
+ obj-$(CONFIG_GPIO_MVEBU)        += gpio-mvebu.o
+ obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
+ obj-$(CONFIG_GPIO_MXS)		+= gpio-mxs.o
++obj-$(CONFIG_GPIO_NXP_74HC153)	+= gpio-nxp-74hc153.o
+ obj-$(CONFIG_GPIO_OCTEON)	+= gpio-octeon.o
+ obj-$(CONFIG_GPIO_OMAP)		+= gpio-omap.o
+ obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
diff --git a/target/linux/ar71xx/patches-3.18/451-gpio-74x164-improve-platform-device-support.patch b/target/linux/ar71xx/patches-3.18/451-gpio-74x164-improve-platform-device-support.patch
new file mode 100644
index 0000000000..ed95f5e25e
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/451-gpio-74x164-improve-platform-device-support.patch
@@ -0,0 +1,70 @@
+--- a/drivers/gpio/gpio-74x164.c
++++ b/drivers/gpio/gpio-74x164.c
+@@ -107,8 +107,18 @@ static int gen_74x164_direction_output(s
+ static int gen_74x164_probe(struct spi_device *spi)
+ {
+ 	struct gen_74x164_chip *chip;
++	struct gen_74x164_chip_platform_data *pdata;
++	struct device_node *np;
+ 	int ret;
+ 
++	pdata = spi->dev.platform_data;
++	np = spi->dev.of_node;
++
++	if (!np && !pdata) {
++		dev_err(&spi->dev, "No configuration data available.\n");
++		return -EINVAL;
++	}
++
+ 	/*
+ 	 * bits_per_word cannot be configured in platform data
+ 	 */
+@@ -130,18 +140,27 @@ static int gen_74x164_probe(struct spi_d
+ 	chip->gpio_chip.set = gen_74x164_set_value;
+ 	chip->gpio_chip.base = -1;
+ 
+-	if (of_property_read_u32(spi->dev.of_node, "registers-number",
+-				 &chip->registers)) {
+-		dev_err(&spi->dev,
+-			"Missing registers-number property in the DT.\n");
+-		return -EINVAL;
++	if (np) {
++		if (of_property_read_u32(spi->dev.of_node, "registers-number", &chip->registers)) {
++			dev_err(&spi->dev, "Missing registers-number property in the DT.\n");
++			ret = -EINVAL;
++			goto exit_destroy;
++		}
++	} else if (pdata) {
++		chip->registers = pdata->num_registers;
+ 	}
+ 
++	if (!chip->registers)
++		chip->registers = 1;
++
+ 	chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
+ 	chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL);
+ 	if (!chip->buffer)
+ 		return -ENOMEM;
+ 
++	if (pdata && pdata->init_data)
++		memcpy(chip->buffer, pdata->init_data, chip->registers);
++
+ 	chip->gpio_chip.can_sleep = true;
+ 	chip->gpio_chip.dev = &spi->dev;
+ 	chip->gpio_chip.owner = THIS_MODULE;
+--- /dev/null
++++ b/include/linux/spi/74x164.h
+@@ -0,0 +1,13 @@
++#ifndef LINUX_SPI_74X164_H
++#define LINUX_SPI_74X164_H
++
++struct gen_74x164_chip_platform_data {
++	/* number assigned to the first GPIO */
++	unsigned        base;
++	/* number of chained registers */
++	unsigned	num_registers;
++	/* address of a buffer containing initial data */
++	u8		*init_data;
++};
++
++#endif
diff --git a/target/linux/ar71xx/patches-3.18/452-gpio-add-gpio-latch-driver.patch b/target/linux/ar71xx/patches-3.18/452-gpio-add-gpio-latch-driver.patch
new file mode 100644
index 0000000000..405923a91e
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/452-gpio-add-gpio-latch-driver.patch
@@ -0,0 +1,22 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -913,4 +913,9 @@ config GPIO_NXP_74HC153
+ 	  Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
+ 	  provides a GPIO interface supporting input mode only.
+ 
++config GPIO_LATCH
++	tristate "GPIO latch driver"
++	help
++	  Say yes here to enable a GPIO latch driver.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -39,6 +39,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz
+ obj-$(CONFIG_GPIO_KEMPLD)	+= gpio-kempld.o
+ obj-$(CONFIG_ARCH_KS8695)	+= gpio-ks8695.o
+ obj-$(CONFIG_GPIO_INTEL_MID)	+= gpio-intel-mid.o
++obj-$(CONFIG_GPIO_LATCH)	+= gpio-latch.o
+ obj-$(CONFIG_GPIO_LP3943)	+= gpio-lp3943.o
+ obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
+ obj-$(CONFIG_GPIO_LYNXPOINT)	+= gpio-lynxpoint.o
diff --git a/target/linux/ar71xx/patches-3.18/460-spi-bitbang-export-spi_bitbang_bufs.patch b/target/linux/ar71xx/patches-3.18/460-spi-bitbang-export-spi_bitbang_bufs.patch
new file mode 100644
index 0000000000..010958be86
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/460-spi-bitbang-export-spi_bitbang_bufs.patch
@@ -0,0 +1,28 @@
+--- a/drivers/spi/spi-bitbang.c
++++ b/drivers/spi/spi-bitbang.c
+@@ -233,13 +233,14 @@ void spi_bitbang_cleanup(struct spi_devi
+ }
+ EXPORT_SYMBOL_GPL(spi_bitbang_cleanup);
+ 
+-static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
++int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
+ {
+ 	struct spi_bitbang_cs	*cs = spi->controller_state;
+ 	unsigned		nsecs = cs->nsecs;
+ 
+ 	return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t);
+ }
++EXPORT_SYMBOL_GPL(spi_bitbang_bufs);
+ 
+ /*----------------------------------------------------------------------*/
+ 
+--- a/include/linux/spi/spi_bitbang.h
++++ b/include/linux/spi/spi_bitbang.h
+@@ -39,6 +39,7 @@ extern int spi_bitbang_setup(struct spi_
+ extern void spi_bitbang_cleanup(struct spi_device *spi);
+ extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+ 				      struct spi_transfer *t);
++extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t);
+ 
+ /* start or stop queue processing */
+ extern int spi_bitbang_start(struct spi_bitbang *spi);
diff --git a/target/linux/ar71xx/patches-3.18/461-spi-add-type-field-to-spi_transfer.patch b/target/linux/ar71xx/patches-3.18/461-spi-add-type-field-to-spi_transfer.patch
new file mode 100644
index 0000000000..a1a51dfd92
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/461-spi-add-type-field-to-spi_transfer.patch
@@ -0,0 +1,23 @@
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -508,6 +508,12 @@ extern struct spi_master *spi_busnum_to_
+ 
+ /*---------------------------------------------------------------------------*/
+ 
++enum spi_transfer_type {
++	SPI_TRANSFER_GENERIC = 0,
++	SPI_TRANSFER_FLASH_READ_CMD,
++	SPI_TRANSFER_FLASH_READ_DATA,
++};
++
+ /*
+  * I/O INTERFACE between SPI controller and protocol drivers
+  *
+@@ -628,6 +634,7 @@ struct spi_transfer {
+ 	u8		bits_per_word;
+ 	u16		delay_usecs;
+ 	u32		speed_hz;
++	enum spi_transfer_type type;
+ 
+ 	struct list_head transfer_list;
+ };
diff --git a/target/linux/ar71xx/patches-3.18/462-mtd-m25p80-set-spi-transfer-type.patch b/target/linux/ar71xx/patches-3.18/462-mtd-m25p80-set-spi-transfer-type.patch
new file mode 100644
index 0000000000..3320e5b845
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/462-mtd-m25p80-set-spi-transfer-type.patch
@@ -0,0 +1,15 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -142,10 +142,12 @@ static int m25p80_read(struct spi_nor *n
+ 	flash->command[0] = nor->read_opcode;
+ 	m25p_addr2cmd(nor, from, flash->command);
+ 
++	t[0].type = SPI_TRANSFER_FLASH_READ_CMD;
+ 	t[0].tx_buf = flash->command;
+ 	t[0].len = m25p_cmdsz(nor) + dummy;
+ 	spi_message_add_tail(&t[0], &m);
+ 
++	t[1].type = SPI_TRANSFER_FLASH_READ_DATA;
+ 	t[1].rx_buf = buf;
+ 	t[1].rx_nbits = m25p80_rx_nbits(nor);
+ 	t[1].len = len;
diff --git a/target/linux/ar71xx/patches-3.18/463-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-3.18/463-spi-ath79-add-fast-flash-read.patch
new file mode 100644
index 0000000000..0e0e28f845
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/463-spi-ath79-add-fast-flash-read.patch
@@ -0,0 +1,185 @@
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -35,6 +35,11 @@
+ 
+ #define ATH79_SPI_CS_LINE_MAX		2
+ 
++enum ath79_spi_state {
++	ATH79_SPI_STATE_WAIT_CMD = 0,
++	ATH79_SPI_STATE_WAIT_READ,
++};
++
+ struct ath79_spi {
+ 	struct spi_bitbang	bitbang;
+ 	u32			ioc_base;
+@@ -42,6 +47,11 @@ struct ath79_spi {
+ 	void __iomem		*base;
+ 	struct clk		*clk;
+ 	unsigned		rrw_delay;
++
++	enum ath79_spi_state	state;
++	u32			clk_div;
++	unsigned long 		read_addr;
++	unsigned long		ahb_rate;
+ };
+ 
+ static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
+@@ -109,9 +119,6 @@ static void ath79_spi_enable(struct ath7
+ 	/* save CTRL register */
+ 	sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
+ 	sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
+-
+-	/* TODO: setup speed? */
+-	ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+ }
+ 
+ static void ath79_spi_disable(struct ath79_spi *sp)
+@@ -224,6 +231,110 @@ static u32 ath79_spi_txrx_mode0(struct s
+ 	return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
+ }
+ 
++static int ath79_spi_do_read_flash_data(struct spi_device *spi,
++					struct spi_transfer *t)
++{
++	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++
++	/* disable GPIO mode */
++	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++
++	memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len);
++
++	/* enable GPIO mode */
++	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
++
++	/* restore IOC register */
++	ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
++
++	return t->len;
++}
++
++static int ath79_spi_do_read_flash_cmd(struct spi_device *spi,
++				       struct spi_transfer *t)
++{
++	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++	int len;
++	const u8 *p;
++
++	sp->read_addr = 0;
++
++	len = t->len - 1;
++	p = t->tx_buf;
++
++	while (len--) {
++		p++;
++		sp->read_addr <<= 8;
++		sp->read_addr |= *p;
++	}
++
++	return t->len;
++}
++
++static bool ath79_spi_is_read_cmd(struct spi_device *spi,
++				 struct spi_transfer *t)
++{
++	return t->type == SPI_TRANSFER_FLASH_READ_CMD;
++}
++
++static bool ath79_spi_is_data_read(struct spi_device *spi,
++				  struct spi_transfer *t)
++{
++	return t->type == SPI_TRANSFER_FLASH_READ_DATA;
++}
++
++static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++	int ret;
++
++	switch (sp->state) {
++	case ATH79_SPI_STATE_WAIT_CMD:
++		if (ath79_spi_is_read_cmd(spi, t)) {
++			ret = ath79_spi_do_read_flash_cmd(spi, t);
++			sp->state = ATH79_SPI_STATE_WAIT_READ;
++		} else {
++			ret = spi_bitbang_bufs(spi, t);
++		}
++		break;
++
++	case ATH79_SPI_STATE_WAIT_READ:
++		if (ath79_spi_is_data_read(spi, t)) {
++			ret = ath79_spi_do_read_flash_data(spi, t);
++		} else {
++			dev_warn(&spi->dev, "flash data read expected\n");
++			ret = -EIO;
++		}
++		sp->state = ATH79_SPI_STATE_WAIT_CMD;
++		break;
++
++	default:
++		BUG();
++	}
++
++	return ret;
++}
++
++static int ath79_spi_setup_transfer(struct spi_device *spi,
++				    struct spi_transfer *t)
++{
++	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++	struct ath79_spi_controller_data *cdata;
++	int ret;
++
++	ret = spi_bitbang_setup_transfer(spi, t);
++	if (ret)
++		return ret;
++
++	cdata = spi->controller_data;
++	if (cdata->is_flash)
++		sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs;
++	else
++		sp->bitbang.txrx_bufs = spi_bitbang_bufs;
++
++	return ret;
++}
++
+ static int ath79_spi_probe(struct platform_device *pdev)
+ {
+ 	struct spi_master *master;
+@@ -246,6 +357,8 @@ static int ath79_spi_probe(struct platfo
+ 	sp = spi_master_get_devdata(master);
+ 	platform_set_drvdata(pdev, sp);
+ 
++	sp->state = ATH79_SPI_STATE_WAIT_CMD;
++
+ 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+ 	master->setup = ath79_spi_setup;
+ 	master->cleanup = ath79_spi_cleanup;
+@@ -255,7 +368,7 @@ static int ath79_spi_probe(struct platfo
+ 	sp->bitbang.master = master;
+ 	sp->bitbang.chipselect = ath79_spi_chipselect;
+ 	sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
+-	sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
++	sp->bitbang.setup_transfer = ath79_spi_setup_transfer;
+ 	sp->bitbang.flags = SPI_CS_HIGH;
+ 
+ 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+@@ -280,7 +393,8 @@ static int ath79_spi_probe(struct platfo
+ 	if (ret)
+ 		goto err_put_master;
+ 
+-	rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
++	sp->ahb_rate = clk_get_rate(sp->clk);
++	rate = DIV_ROUND_UP(sp->ahb_rate, MHZ);
+ 	if (!rate) {
+ 		ret = -EINVAL;
+ 		goto err_clk_disable;
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -24,6 +24,7 @@ enum ath79_spi_cs_type {
+ struct ath79_spi_controller_data {
+ 	enum ath79_spi_cs_type cs_type;
+ 	unsigned cs_line;
++	bool is_flash;
+ };
+ 
+ #endif /* _ATH79_SPI_PLATFORM_H */
diff --git a/target/linux/ar71xx/patches-3.18/464-spi-ath79-fix-fast-flash-read.patch b/target/linux/ar71xx/patches-3.18/464-spi-ath79-fix-fast-flash-read.patch
new file mode 100644
index 0000000000..39f26abc8d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/464-spi-ath79-fix-fast-flash-read.patch
@@ -0,0 +1,35 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -142,6 +142,9 @@
+ 	flash->command[0] = nor->read_opcode;
+ 	m25p_addr2cmd(nor, from, flash->command);
+ 
++	if (dummy == 1)
++		t[0].dummy = true;
++
+ 	t[0].type = SPI_TRANSFER_FLASH_READ_CMD;
+ 	t[0].tx_buf = flash->command;
+ 	t[0].len = m25p_cmdsz(nor) + dummy;
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -260,6 +260,10 @@
+ 	sp->read_addr = 0;
+ 
+ 	len = t->len - 1;
++
++	if (t->dummy)
++		len -= 1;
++
+ 	p = t->tx_buf;
+ 
+ 	while (len--) {
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -635,6 +635,7 @@
+ 	u16		delay_usecs;
+ 	u32		speed_hz;
+ 	enum spi_transfer_type type;
++	bool dummy;
+ 
+ 	struct list_head transfer_list;
+ };
diff --git a/target/linux/ar71xx/patches-3.18/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ar71xx/patches-3.18/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
new file mode 100644
index 0000000000..520c652059
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
@@ -0,0 +1,111 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
+@@ -0,0 +1,37 @@
++/*
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
++ *      Copyright (C) 2003, 2004 Ralf Baechle
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
++#define __ASM_MACH_ATH79_MANGLE_PORT_H
++
++#ifdef CONFIG_PCI
++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
++#else
++#define ath79_pci_swizzle_b(port) (port)
++#define ath79_pci_swizzle_w(port) (port)
++#endif
++
++#define __swizzle_addr_b(port)	ath79_pci_swizzle_b(port)
++#define __swizzle_addr_w(port)	ath79_pci_swizzle_w(port)
++#define __swizzle_addr_l(port)	(port)
++#define __swizzle_addr_q(port)	(port)
++
++# define ioswabb(a, x)           (x)
++# define __mem_ioswabb(a, x)     (x)
++# define ioswabw(a, x)           (x)
++# define __mem_ioswabw(a, x)     cpu_to_le16(x)
++# define ioswabl(a, x)           (x)
++# define __mem_ioswabl(a, x)     cpu_to_le32(x)
++# define ioswabq(a, x)           (x)
++# define __mem_ioswabq(a, x)     cpu_to_le64(x)
++
++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -13,6 +13,7 @@
+  */
+ 
+ #include <linux/init.h>
++#include <linux/export.h>
+ #include <linux/pci.h>
+ #include <linux/resource.h>
+ #include <linux/platform_device.h>
+@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st
+ static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+ static unsigned ath79_pci_nr_irqs __initdata;
+ 
++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
++
+ static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+ 	{
+ 		.slot	= 17,
+@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id,
+ 	return pdev;
+ }
+ 
++static inline bool ar71xx_is_pci_addr(unsigned long port)
++{
++	unsigned long phys = CPHYSADDR(port);
++
++	return (phys >= AR71XX_PCI_MEM_BASE &&
++		phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
++}
++
++static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
++{
++	return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
++}
++
++static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
++{
++	return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
++}
++
++unsigned long ath79_pci_swizzle_b(unsigned long port)
++{
++	if (__ath79_pci_swizzle_b)
++		return __ath79_pci_swizzle_b(port);
++
++	return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_b);
++
++unsigned long ath79_pci_swizzle_w(unsigned long port)
++{
++	if (__ath79_pci_swizzle_w)
++		return __ath79_pci_swizzle_w(port);
++
++	return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_w);
++
+ int __init ath79_register_pci(void)
+ {
+ 	struct platform_device *pdev = NULL;
+ 
+ 	if (soc_is_ar71xx()) {
+ 		pdev = ath79_register_pci_ar71xx();
++		__ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
++		__ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
+ 	} else if (soc_is_ar724x()) {
+ 		pdev = ath79_register_pci_ar724x(-1,
+ 						 AR724X_PCI_CFG_BASE,
diff --git a/target/linux/ar71xx/patches-3.18/480-ar913x_wmac_external_reset.patch b/target/linux/ar71xx/patches-3.18/480-ar913x_wmac_external_reset.patch
new file mode 100644
index 0000000000..9b704a3c47
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/480-ar913x_wmac_external_reset.patch
@@ -0,0 +1,31 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac
+ 	},
+ };
+ 
+-static void __init ar913x_wmac_setup(void)
++static int ar913x_wmac_reset(void)
+ {
+ 	/* reset the WMAC */
+ 	ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
+@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi
+ 	ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
+ 	mdelay(10);
+ 
++	return 0;
++}
++
++static void __init ar913x_wmac_setup(void)
++{
++	ar913x_wmac_reset();
++
+ 	ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+ 	ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+ 	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
+ 	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
++
++	ath79_wmac_data.external_reset = ar913x_wmac_reset;
+ }
+ 
+ 
diff --git a/target/linux/ar71xx/patches-3.18/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ar71xx/patches-3.18/490-usb-ehci-add-quirks-for-qca-socs.patch
new file mode 100644
index 0000000000..a5053130d6
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/490-usb-ehci-add-quirks-for-qca-socs.patch
@@ -0,0 +1,103 @@
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -252,6 +252,37 @@ static int ehci_reset (struct ehci_hcd *
+ 	command |= CMD_RESET;
+ 	dbg_cmd (ehci, "reset", command);
+ 	ehci_writel(ehci, command, &ehci->regs->command);
++
++	if (ehci->qca_force_host_mode) {
++		u32 usbmode;
++
++		udelay(1000);
++
++		usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
++		usbmode |= USBMODE_CM_HC | (1 << 4);
++		ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
++
++		ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
++			 ehci_readl(ehci, &ehci->regs->usbmode));
++	}
++
++	if (ehci->qca_force_16bit_ptw) {
++		u32 port_status;
++
++		udelay(1000);
++
++		/* enable 16-bit UTMI interface */
++		port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
++		port_status |= BIT(28);
++		ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
++
++		ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
++			 ehci_readl(ehci, &ehci->regs->port_status[0]));
++	}
++
++	if (ehci->reset_notifier)
++		ehci->reset_notifier(ehci_to_hcd(ehci));
++
+ 	ehci->rh_state = EHCI_RH_HALTED;
+ 	ehci->next_statechange = jiffies;
+ 	retval = ehci_handshake(ehci, &ehci->regs->command,
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -227,6 +227,10 @@ struct ehci_hcd {			/* one per controlle
+ 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
+ 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
+ 	unsigned		ignore_oc:1;
++	unsigned		qca_force_host_mode:1;
++	unsigned		qca_force_16bit_ptw:1; /* force 16 bit UTMI */
++
++	void (*reset_notifier)(struct usb_hcd *hcd);
+ 
+ 	/* required for usb32 quirk */
+ 	#define OHCI_CTRL_HCFS          (3 << 6)
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -46,6 +46,8 @@ struct usb_ehci_pdata {
+ 	unsigned	big_endian_mmio:1;
+ 	unsigned	no_io_watchdog:1;
+ 	unsigned	ignore_oc:1;
++	unsigned	qca_force_host_mode:1;
++	unsigned	qca_force_16bit_ptw:1;
+ 
+ 	/* Turn on all power and clocks */
+ 	int (*power_on)(struct platform_device *pdev);
+@@ -55,6 +57,7 @@ struct usb_ehci_pdata {
+ 	 * turn off everything else */
+ 	void (*power_suspend)(struct platform_device *pdev);
+ 	int (*pre_setup)(struct usb_hcd *hcd);
++	void (*reset_notifier)(struct platform_device *pdev);
+ };
+ 
+ #endif /* __USB_CORE_EHCI_PDRIVER_H */
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -48,6 +48,14 @@ struct ehci_platform_priv {
+ 
+ static const char hcd_name[] = "ehci-platform";
+ 
++static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
++{
++	struct platform_device *pdev = to_platform_device(hcd->self.controller);
++	struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
++
++	pdata->reset_notifier(pdev);
++}
++
+ static int ehci_platform_reset(struct usb_hcd *hcd)
+ {
+ 	struct platform_device *pdev = to_platform_device(hcd->self.controller);
+@@ -228,6 +236,13 @@ static int ehci_platform_probe(struct pl
+ 		ehci->big_endian_mmio = 1;
+ 	if (pdata->ignore_oc)
+ 		ehci->ignore_oc = 1;
++	if (pdata->qca_force_host_mode)
++		ehci->qca_force_host_mode = 1;
++	if (pdata->qca_force_16bit_ptw)
++		ehci->qca_force_16bit_ptw = 1;
++
++	if (pdata->reset_notifier)
++		ehci->reset_notifier = ehci_platform_reset_notifier;
+ 
+ #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ 	if (ehci->big_endian_mmio) {
diff --git a/target/linux/ar71xx/patches-3.18/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-3.18/500-MIPS-fw-myloader.patch
new file mode 100644
index 0000000000..2a8944300a
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/500-MIPS-fw-myloader.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -208,6 +208,7 @@ endif
+ #
+ libs-$(CONFIG_FW_ARC)		+= arch/mips/fw/arc/
+ libs-$(CONFIG_FW_CFE)		+= arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/
+ libs-$(CONFIG_FW_SNIPROM)	+= arch/mips/fw/sni/
+ libs-y				+= arch/mips/fw/lib/
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -982,6 +982,9 @@ config MIPS_MSC
+ config MIPS_NILE4
+ 	bool
+ 
++config MYLOADER
++	bool
++
+ config SYNC_R4K
+ 	bool
+ 
diff --git a/target/linux/ar71xx/patches-3.18/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-3.18/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
new file mode 100644
index 0000000000..d9b8682f0d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
@@ -0,0 +1,81 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -15,6 +15,7 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/irq.h>
++#include <linux/etherdevice.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
+ 
+@@ -22,6 +23,7 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "dev-wmac.h"
+ 
++static u8 ath79_wmac_mac[ETH_ALEN];
+ static struct ath9k_platform_data ath79_wmac_data;
+ 
+ static struct resource ath79_wmac_resources[] = {
+@@ -160,7 +162,7 @@ static void qca955x_wmac_setup(void)
+ 		ath79_wmac_data.is_clk_25mhz = true;
+ }
+ 
+-void __init ath79_register_wmac(u8 *cal_data)
++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ 	if (soc_is_ar913x())
+ 		ar913x_wmac_setup();
+@@ -177,5 +179,10 @@ void __init ath79_register_wmac(u8 *cal_
+ 		memcpy(ath79_wmac_data.eeprom_data, cal_data,
+ 		       sizeof(ath79_wmac_data.eeprom_data));
+ 
++	if (mac_addr) {
++		memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
++		ath79_wmac_data.macaddr = ath79_wmac_mac;
++	}
++
+ 	platform_device_register(&ath79_wmac_device);
+ }
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -12,6 +12,6 @@
+ #ifndef _ATH79_DEV_WMAC_H
+ #define _ATH79_DEV_WMAC_H
+ 
+-void ath79_register_wmac(u8 *cal_data);
++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ 
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -98,7 +98,7 @@ static void __init ap81_setup(void)
+ 					ap81_gpio_keys);
+ 	ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+ 			   ARRAY_SIZE(ap81_spi_info));
+-	ath79_register_wmac(cal_data);
++	ath79_register_wmac(cal_data, NULL);
+ 	ath79_register_usb();
+ }
+ 
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -134,7 +134,7 @@ static void __init db120_setup(void)
+ 	ath79_register_spi(&db120_spi_data, db120_spi_info,
+ 			   ARRAY_SIZE(db120_spi_info));
+ 	ath79_register_usb();
+-	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
++	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+ 	db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+ }
+ 
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -91,7 +91,7 @@ static void __init ap121_setup(void)
+ 	ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+ 			   ARRAY_SIZE(ap121_spi_info));
+ 	ath79_register_usb();
+-	ath79_register_wmac(cal_data);
++	ath79_register_wmac(cal_data, NULL);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
diff --git a/target/linux/ar71xx/patches-3.18/502-MIPS-ath79-export-ath79_gpio_base.patch b/target/linux/ar71xx/patches-3.18/502-MIPS-ath79-export-ath79_gpio_base.patch
new file mode 100644
index 0000000000..73eb8e1067
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/502-MIPS-ath79-export-ath79_gpio_base.patch
@@ -0,0 +1,23 @@
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -25,7 +25,9 @@
+ #include <asm/mach-ath79/ath79.h>
+ #include "common.h"
+ 
+-static void __iomem *ath79_gpio_base;
++void __iomem *ath79_gpio_base;
++EXPORT_SYMBOL_GPL(ath79_gpio_base);
++
+ static unsigned long ath79_gpio_count;
+ static DEFINE_SPINLOCK(ath79_gpio_lock);
+ 
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -116,6 +116,7 @@ static inline int soc_is_qca955x(void)
+ }
+ 
+ extern void __iomem *ath79_ddr_base;
++extern void __iomem *ath79_gpio_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
+ 
diff --git a/target/linux/ar71xx/patches-3.18/503-MIPS-ath79-add-flash-acquire-release.patch b/target/linux/ar71xx/patches-3.18/503-MIPS-ath79-add-flash-acquire-release.patch
new file mode 100644
index 0000000000..06f790299d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/503-MIPS-ath79-add-flash-acquire-release.patch
@@ -0,0 +1,37 @@
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -22,6 +22,7 @@
+ #include "common.h"
+ 
+ static DEFINE_SPINLOCK(ath79_device_reset_lock);
++static DEFINE_MUTEX(ath79_flash_mutex);
+ 
+ u32 ath79_cpu_freq;
+ EXPORT_SYMBOL_GPL(ath79_cpu_freq);
+@@ -111,3 +112,16 @@ void ath79_device_reset_clear(u32 mask)
+ 	spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
++
++void ath79_flash_acquire(void)
++{
++	mutex_lock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_acquire);
++
++void ath79_flash_release(void)
++{
++	mutex_unlock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_release);
++
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -143,4 +143,7 @@ static inline u32 ath79_reset_rr(unsigne
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
+ 
++void ath79_flash_acquire(void);
++void ath79_flash_release(void);
++
+ #endif /* __ASM_MACH_ATH79_H */
diff --git a/target/linux/ar71xx/patches-3.18/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-3.18/504-MIPS-ath79-add-ath79_device_reset_get.patch
new file mode 100644
index 0000000000..024a85d06a
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/504-MIPS-ath79-add-ath79_device_reset_get.patch
@@ -0,0 +1,45 @@
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -142,6 +142,7 @@ static inline u32 ath79_reset_rr(unsigne
+ 
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
++u32 ath79_device_reset_get(u32 mask);
+ 
+ void ath79_flash_acquire(void);
+ void ath79_flash_release(void);
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -113,6 +113,32 @@ void ath79_device_reset_clear(u32 mask)
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
+ 
++u32 ath79_device_reset_get(u32 mask)
++{
++	unsigned long flags;
++	u32 reg;
++	u32 ret;
++
++	if (soc_is_ar71xx())
++		reg = AR71XX_RESET_REG_RESET_MODULE;
++	else if (soc_is_ar724x())
++		reg = AR724X_RESET_REG_RESET_MODULE;
++	else if (soc_is_ar913x())
++		reg = AR913X_RESET_REG_RESET_MODULE;
++	else if (soc_is_ar933x())
++		reg = AR933X_RESET_REG_RESET_MODULE;
++	else if (soc_is_ar934x())
++		reg = AR934X_RESET_REG_RESET_MODULE;
++	else
++		BUG();
++
++	spin_lock_irqsave(&ath79_device_reset_lock, flags);
++	ret = ath79_reset_rr(reg);
++	spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
++	return ret;
++}
++EXPORT_SYMBOL_GPL(ath79_device_reset_get);
++
+ void ath79_flash_acquire(void)
+ {
+ 	mutex_lock(&ath79_flash_mutex);
diff --git a/target/linux/ar71xx/patches-3.18/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-3.18/505-MIPS-ath79-add-ath79_gpio_function_select.patch
new file mode 100644
index 0000000000..4c4c8914ee
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/505-MIPS-ath79-add-ath79_gpio_function_select.patch
@@ -0,0 +1,47 @@
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -27,6 +27,7 @@ void ath79_ddr_wb_flush(unsigned int reg
+ void ath79_gpio_function_enable(u32 mask);
+ void ath79_gpio_function_disable(u32 mask);
+ void ath79_gpio_function_setup(u32 set, u32 clear);
++void ath79_gpio_output_select(unsigned gpio, u8 val);
+ void ath79_gpio_init(void);
+ 
+ #endif /* __ATH79_COMMON_H */
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -180,6 +180,34 @@ void ath79_gpio_function_disable(u32 mas
+ 	ath79_gpio_function_setup(0, mask);
+ }
+ 
++void __init ath79_gpio_output_select(unsigned gpio, u8 val)
++{
++	void __iomem *base = ath79_gpio_base;
++	unsigned long flags;
++	unsigned int reg;
++	u32 t, s;
++
++	BUG_ON(!soc_is_ar934x());
++
++	if (gpio >= AR934X_GPIO_COUNT)
++		return;
++
++	reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
++	s = 8 * (gpio % 4);
++
++	spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++	t = __raw_readl(base + reg);
++	t &= ~(0xff << s);
++	t |= val << s;
++	__raw_writel(t, base + reg);
++
++	/* flush write */
++	(void) __raw_readl(base + reg);
++
++	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++}
++
+ void __init ath79_gpio_init(void)
+ {
+ 	int err;
diff --git a/target/linux/ar71xx/patches-3.18/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-3.18/506-MIPS-ath79-prom-parse-redboot-args.patch
new file mode 100644
index 0000000000..aab959b900
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/506-MIPS-ath79-prom-parse-redboot-args.patch
@@ -0,0 +1,86 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -19,6 +19,8 @@
+ 
+ #include "common.h"
+ 
++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
++
+ static inline int is_valid_ram_addr(void *addr)
+ {
+ 	if (((u32) addr > KSEG0) &&
+@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void
+ 	return 0;
+ }
+ 
++static void __init ath79_prom_append_cmdline(const char *name,
++					      const char *value)
++{
++	snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
++		 " %s=%s", name, value);
++	strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
++}
++
++static const char * __init ath79_prom_find_env(char **envp, const char *name)
++{
++	const char *ret = NULL;
++	int len;
++	char **p;
++
++	if (!is_valid_ram_addr(envp))
++		return NULL;
++
++	len = strlen(name);
++	for (p = envp; is_valid_ram_addr(*p); p++) {
++		if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') {
++			ret = *p + len + 1;
++			break;
++		}
++
++		/* RedBoot env comes in pointer pairs - key, value */
++		if (strncmp(name, *p, len) == 0 && (*p)[len] == 0)
++			if (is_valid_ram_addr(*(++p))) {
++				ret = *p;
++				break;
++			}
++	}
++
++	return ret;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+ 	int i;
+@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli
+ 
+ void __init prom_init(void)
+ {
++	const char *env;
++	char **envp;
++
+ 	ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
++
++	envp = (char **)fw_arg2;
++	if (!strstr(arcs_cmdline, "ethaddr=")) {
++		env = ath79_prom_find_env(envp, "ethaddr");
++		if (env)
++			ath79_prom_append_cmdline("ethaddr", env);
++	}
++
++	if (!strstr(arcs_cmdline, "board=")) {
++		env = ath79_prom_find_env(envp, "board");
++		if (env) {
++			/* Workaround for buggy bootloaders */
++			if (strcmp(env, "RouterStation") == 0 ||
++			    strcmp(env, "Ubiquiti AR71xx-based board") == 0)
++				env = "UBNT-RS";
++
++			if (strcmp(env, "RouterStation PRO") == 0)
++				env = "UBNT-RSPRO";
++
++			ath79_prom_append_cmdline("board", env);
++		}
++	}
+ }
+ 
+ void __init prom_free_prom_memory(void)
diff --git a/target/linux/ar71xx/patches-3.18/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-3.18/507-MIPS-ath79-prom-add-myloader-support.patch
new file mode 100644
index 0000000000..67c1faf9b0
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/507-MIPS-ath79-prom-add-myloader-support.patch
@@ -0,0 +1,58 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -16,6 +16,7 @@
+ 
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
++#include <asm/fw/myloader/myloader.h>
+ 
+ #include "common.h"
+ 
+@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi
+ 	return ret;
+ }
+ 
++static int __init ath79_prom_init_myloader(void)
++{
++	struct myloader_info *mylo;
++	char mac_buf[32];
++	unsigned char *mac;
++
++	mylo = myloader_get_info();
++	if (!mylo)
++		return 0;
++
++	switch (mylo->did) {
++	case DEVID_COMPEX_WP543:
++		ath79_prom_append_cmdline("board", "WP543");
++		break;
++	case DEVID_COMPEX_WPE72:
++		ath79_prom_append_cmdline("board", "WPE72");
++		break;
++	default:
++		pr_warn("prom: unknown device id: %x\n", mylo->did);
++		return 0;
++	}
++
++	mac = mylo->macs[0];
++	snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
++		 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++
++	ath79_prom_append_cmdline("ethaddr", mac_buf);
++
++	return 1;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+ 	int i;
+@@ -88,6 +120,9 @@ void __init prom_init(void)
+ 	const char *env;
+ 	char **envp;
+ 
++	if (ath79_prom_init_myloader())
++		return;
++
+ 	ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
+ 
+ 	envp = (char **)fw_arg2;
diff --git a/target/linux/ar71xx/patches-3.18/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-3.18/508-MIPS-ath79-prom-image-command-line-hack.patch
new file mode 100644
index 0000000000..72a3b56649
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/508-MIPS-ath79-prom-image-command-line-hack.patch
@@ -0,0 +1,57 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi
+ 	return ret;
+ }
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++extern char __image_cmdline[];
++
++static int __init ath79_use_image_cmdline(void)
++{
++	char *p = __image_cmdline;
++	int replace = 0;
++
++	if (*p == '-') {
++		replace = 1;
++		p++;
++	}
++
++	if (*p == '\0')
++		return 0;
++
++	if (replace) {
++		strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
++	} else {
++		strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
++		strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
++	}
++
++	return 1;
++}
++#else
++static inline int ath79_use_image_cmdline(void) { return 0; }
++#endif
++
+ static int __init ath79_prom_init_myloader(void)
+ {
+ 	struct myloader_info *mylo;
+@@ -98,6 +127,8 @@ static int __init ath79_prom_init_myload
+ 
+ 	ath79_prom_append_cmdline("ethaddr", mac_buf);
+ 
++	ath79_use_image_cmdline();
++
+ 	return 1;
+ }
+ 
+@@ -105,6 +136,9 @@ static __init void ath79_prom_init_cmdli
+ {
+ 	int i;
+ 
++	if (ath79_use_image_cmdline())
++		return;
++
+ 	if (!is_valid_ram_addr(argv))
+ 		return;
+ 
diff --git a/target/linux/ar71xx/patches-3.18/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-3.18/509-MIPS-ath79-process-board-kernel-option.patch
new file mode 100644
index 0000000000..42f6b77e8f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/509-MIPS-ath79-process-board-kernel-option.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -229,6 +229,8 @@ void __init plat_time_init(void)
+ 	mips_hpt_frequency = cpu_clk_rate / 2;
+ }
+ 
++__setup("board=", mips_machtype_setup);
++
+ static int __init ath79_setup(void)
+ {
+ 	ath79_gpio_init();
diff --git a/target/linux/ar71xx/patches-3.18/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-3.18/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
new file mode 100644
index 0000000000..2d2235e292
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
@@ -0,0 +1,14 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -24,7 +24,10 @@
+ #include "dev-wmac.h"
+ 
+ static u8 ath79_wmac_mac[ETH_ALEN];
+-static struct ath9k_platform_data ath79_wmac_data;
++
++static struct ath9k_platform_data ath79_wmac_data = {
++	.led_pin = -1,
++};
+ 
+ static struct resource ath79_wmac_resources[] = {
+ 	{
diff --git a/target/linux/ar71xx/patches-3.18/520-MIPS-ath79-enable-UART-function.patch b/target/linux/ar71xx/patches-3.18/520-MIPS-ath79-enable-UART-function.patch
new file mode 100644
index 0000000000..019e558a56
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/520-MIPS-ath79-enable-UART-function.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -80,6 +80,15 @@ void __init ath79_register_uart(void)
+ 
+ 	uart_clk_rate = ath79_get_sys_clk_rate("uart");
+ 
++	if (soc_is_ar71xx())
++		ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
++	else if (soc_is_ar724x())
++		ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
++	else if (soc_is_ar913x())
++		ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
++	else if (soc_is_ar933x())
++		ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
++
+ 	if (soc_is_ar71xx() ||
+ 	    soc_is_ar724x() ||
+ 	    soc_is_ar913x() ||
diff --git a/target/linux/ar71xx/patches-3.18/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-3.18/521-MIPS-ath79-enable-UART-for-early_serial.patch
new file mode 100644
index 0000000000..3d6ddfe18c
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/521-MIPS-ath79-enable-UART-for-early_serial.patch
@@ -0,0 +1,61 @@
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned
+ 	/* nothing to do */
+ }
+ 
++static void prom_enable_uart(u32 id)
++{
++	void __iomem *gpio_base;
++	u32 uart_en;
++	u32 t;
++
++	switch (id) {
++	case REV_ID_MAJOR_AR71XX:
++		uart_en = AR71XX_GPIO_FUNC_UART_EN;
++		break;
++
++	case REV_ID_MAJOR_AR7240:
++	case REV_ID_MAJOR_AR7241:
++	case REV_ID_MAJOR_AR7242:
++		uart_en = AR724X_GPIO_FUNC_UART_EN;
++		break;
++
++	case REV_ID_MAJOR_AR913X:
++		uart_en = AR913X_GPIO_FUNC_UART_EN;
++		break;
++
++	case REV_ID_MAJOR_AR9330:
++	case REV_ID_MAJOR_AR9331:
++		uart_en = AR933X_GPIO_FUNC_UART_EN;
++		break;
++
++	case REV_ID_MAJOR_AR9341:
++	case REV_ID_MAJOR_AR9342:
++	case REV_ID_MAJOR_AR9344:
++		/* TODO */
++	default:
++		return;
++	}
++
++	gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
++	t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
++	t |= uart_en;
++	__raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
++}
++
+ static void prom_putchar_init(void)
+ {
+ 	void __iomem *base;
+@@ -86,8 +126,10 @@ static void prom_putchar_init(void)
+ 
+ 	default:
+ 		_prom_putchar = prom_putchar_dummy;
+-		break;
++		return;
+ 	}
++
++	prom_enable_uart(id);
+ }
+ 
+ void prom_putchar(unsigned char ch)
diff --git a/target/linux/ar71xx/patches-3.18/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/target/linux/ar71xx/patches-3.18/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
new file mode 100644
index 0000000000..74928e6835
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
@@ -0,0 +1,21 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -189,3 +189,9 @@ void __init ath79_register_wmac(u8 *cal_
+ 
+ 	platform_device_register(&ath79_wmac_device);
+ }
++
++void __init ath79_register_wmac_simple(void)
++{
++	ath79_register_wmac(NULL, NULL);
++	ath79_wmac_data.eeprom_name = "soc_wmac.eeprom";
++}
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -13,5 +13,6 @@
+ #define _ATH79_DEV_WMAC_H
+ 
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
++void ath79_register_wmac_simple(void);
+ 
+ #endif /* _ATH79_DEV_WMAC_H */
diff --git a/target/linux/ar71xx/patches-3.18/523-MIPS-ath79-OTP-support.patch b/target/linux/ar71xx/patches-3.18/523-MIPS-ath79-OTP-support.patch
new file mode 100644
index 0000000000..5ff1cb83fb
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/523-MIPS-ath79-OTP-support.patch
@@ -0,0 +1,166 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -165,6 +165,137 @@ static void qca955x_wmac_setup(void)
+ 		ath79_wmac_data.is_clk_25mhz = true;
+ }
+ 
++static bool __init
++ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
++{
++	int timeout = 1000;
++	u32 val;
++
++	__raw_readl(base + AR9300_OTP_BASE + (4 * addr));
++	while (timeout--) {
++		val = __raw_readl(base + AR9300_OTP_STATUS);
++		if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
++			break;
++
++		udelay(10);
++	}
++
++	if (!timeout)
++		return false;
++
++	*data = __raw_readl(base + AR9300_OTP_READ_DATA);
++	return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
++{
++	u32 data;
++	int i;
++
++	for (i = 0; i < len; i++) {
++		int offset = 8 * ((addr - i) % 4);
++
++		if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
++			return false;
++
++		dest[i] = (data >> offset) & 0xff;
++	}
++
++	return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
++			   int dest_start, int dest_len)
++{
++	int dest_bytes = 0;
++	int offset = 0;
++	int end = addr - len;
++	u8 hdr[2];
++
++	while (addr > end) {
++		if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
++			return false;
++
++		addr -= 2;
++		offset += hdr[0];
++
++		if (offset <= dest_start + dest_len &&
++		    offset + len >= dest_start) {
++			int data_offset = 0;
++			int dest_offset = 0;
++			int copy_len;
++
++			if (offset < dest_start)
++				data_offset = dest_start - offset;
++			else
++				dest_offset = offset - dest_start;
++
++			copy_len = len - data_offset;
++			if (copy_len > dest_len - dest_offset)
++				copy_len = dest_len - dest_offset;
++
++			ar93xx_wmac_otp_read(base, addr - data_offset,
++					     dest + dest_offset,
++					     copy_len);
++
++			dest_bytes += copy_len;
++		}
++		addr -= hdr[1];
++	}
++	return !!dest_bytes;
++}
++
++bool __init ar93xx_wmac_read_mac_address(u8 *dest)
++{
++	void __iomem *base;
++	bool ret = false;
++	int addr = 0x1ff;
++	unsigned int len;
++	u32 hdr_u32;
++	u8 *hdr = (u8 *) &hdr_u32;
++	u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
++	int mac_start = 2, mac_end = 8;
++
++	BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
++	base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE);
++	while (addr > sizeof(hdr)) {
++		if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr)))
++			break;
++
++		if (hdr_u32 == 0 || hdr_u32 == ~0)
++			break;
++
++		len = (hdr[1] << 4) | (hdr[2] >> 4);
++		addr -= 4;
++
++		switch (hdr[0] >> 5) {
++		case 0:
++			if (len < mac_end)
++				break;
++
++			ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
++			ret = true;
++			break;
++		case 3:
++			ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
++							  mac_start, 6);
++			break;
++		default:
++			break;
++		}
++
++		addr -= len + 2;
++	}
++
++	iounmap(base);
++	if (ret)
++		memcpy(dest, mac, 6);
++
++	return ret;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ 	if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -14,5 +14,6 @@
+ 
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ void ath79_register_wmac_simple(void);
++bool ar93xx_wmac_read_mac_address(u8 *dest);
+ 
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -112,6 +112,14 @@
+ #define QCA955X_EHCI1_BASE	0x1b400000
+ #define QCA955X_EHCI_SIZE	0x1000
+ 
++#define AR9300_OTP_BASE		0x14000
++#define AR9300_OTP_STATUS	0x15f18
++#define AR9300_OTP_STATUS_TYPE		0x7
++#define AR9300_OTP_STATUS_VALID		0x4
++#define AR9300_OTP_STATUS_ACCESS_BUSY	0x2
++#define AR9300_OTP_STATUS_SM_BUSY	0x1
++#define AR9300_OTP_READ_DATA	0x15f1c
++
+ /*
+  * DDR_CTRL block
+  */
diff --git a/target/linux/ar71xx/patches-3.18/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/target/linux/ar71xx/patches-3.18/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
new file mode 100644
index 0000000000..7b4b6ef284
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
@@ -0,0 +1,31 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -296,6 +296,16 @@ bool __init ar93xx_wmac_read_mac_address
+ 	return ret;
+ }
+ 
++void __init ath79_wmac_disable_2ghz(void)
++{
++	ath79_wmac_data.disable_2ghz = true;
++}
++
++void __init ath79_wmac_disable_5ghz(void)
++{
++	ath79_wmac_data.disable_5ghz = true;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ 	if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -14,6 +14,9 @@
+ 
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ void ath79_register_wmac_simple(void);
++void ath79_wmac_disable_2ghz(void);
++void ath79_wmac_disable_5ghz(void);
++
+ bool ar93xx_wmac_read_mac_address(u8 *dest);
+ 
+ #endif /* _ATH79_DEV_WMAC_H */
diff --git a/target/linux/ar71xx/patches-3.18/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-3.18/525-MIPS-ath79-enable-qca-usb-quirks.patch
new file mode 100644
index 0000000000..0e33674adf
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/525-MIPS-ath79-enable-qca-usb-quirks.patch
@@ -0,0 +1,101 @@
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -37,6 +37,8 @@ static struct usb_ehci_pdata ath79_ehci_
+ static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
+ 	.caps_offset		= 0x100,
+ 	.has_tt			= 1,
++	.qca_force_host_mode	= 1,
++	.qca_force_16bit_ptw	= 1,
+ };
+ 
+ static void __init ath79_usb_register(const char *name, int id,
+@@ -159,6 +161,9 @@ static void __init ar913x_usb_setup(void
+ 	ath79_device_reset_clear(AR913X_RESET_USB_PHY);
+ 	mdelay(10);
+ 
++	ath79_ehci_pdata_v2.qca_force_host_mode	= 0;
++	ath79_ehci_pdata_v2.qca_force_16bit_ptw	= 0;
++
+ 	ath79_usb_register("ehci-platform", -1,
+ 			   AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
+ 			   ATH79_CPU_IRQ(3),
+@@ -182,14 +187,34 @@ static void __init ar933x_usb_setup(void
+ 			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
+ 
+-static void __init ar934x_usb_setup(void)
++static void enable_tx_tx_idp_violation_fix(unsigned base)
+ {
+-	u32 bootstrap;
++	void __iomem *phy_reg;
++	u32 t;
++
++	phy_reg = ioremap(base, 4);
++	if (!phy_reg)
++		return;
++
++	t = ioread32(phy_reg);
++	t &= ~0xff;
++	t |= 0x58;
++	iowrite32(t, phy_reg);
++
++	iounmap(phy_reg);
++}
+ 
+-	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+-	if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
++static void ar934x_usb_reset_notifier(struct platform_device *pdev)
++{
++	if (pdev->id != -1)
+ 		return;
+ 
++	enable_tx_tx_idp_violation_fix(0x18116c94);
++	dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
++}
++
++static void __init ar934x_usb_setup(void)
++{
+ 	ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
+ 	udelay(1000);
+ 
+@@ -202,14 +227,40 @@ static void __init ar934x_usb_setup(void
+ 	ath79_device_reset_clear(AR934X_RESET_USB_HOST);
+ 	udelay(1000);
+ 
++	if (ath79_soc_rev >= 3)
++		ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier;
++
+ 	ath79_usb_register("ehci-platform", -1,
+ 			   AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
+ 			   ATH79_CPU_IRQ(3),
+ 			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
+ 
++static void qca955x_usb_reset_notifier(struct platform_device *pdev)
++{
++	u32 base;
++
++	switch (pdev->id) {
++	case 0:
++		base = 0x18116c94;
++		break;
++
++	case 1:
++		base = 0x18116e54;
++		break;
++
++	default:
++		return;
++	}
++
++	enable_tx_tx_idp_violation_fix(base);
++	dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
++}
++
+ static void __init qca955x_usb_setup(void)
+ {
++	ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier;
++
+ 	ath79_usb_register("ehci-platform", 0,
+ 			   QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
+ 			   ATH79_IP3_IRQ(0),
diff --git a/target/linux/ar71xx/patches-3.18/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.18/601-MIPS-ath79-add-more-register-defines.patch
new file mode 100644
index 0000000000..2dec0209d7
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/601-MIPS-ath79-add-more-register-defines.patch
@@ -0,0 +1,359 @@
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -20,6 +20,10 @@
+ #include <linux/bitops.h>
+ 
+ #define AR71XX_APB_BASE		0x18000000
++#define AR71XX_GE0_BASE		0x19000000
++#define AR71XX_GE0_SIZE		0x10000
++#define AR71XX_GE1_BASE		0x1a000000
++#define AR71XX_GE1_SIZE		0x10000
+ #define AR71XX_EHCI_BASE	0x1b000000
+ #define AR71XX_EHCI_SIZE	0x1000
+ #define AR71XX_OHCI_BASE	0x1c000000
+@@ -39,6 +43,8 @@
+ #define AR71XX_PLL_SIZE		0x100
+ #define AR71XX_RESET_BASE	(AR71XX_APB_BASE + 0x00060000)
+ #define AR71XX_RESET_SIZE	0x100
++#define AR71XX_MII_BASE		(AR71XX_APB_BASE + 0x00070000)
++#define AR71XX_MII_SIZE		0x100
+ 
+ #define AR71XX_PCI_MEM_BASE	0x10000000
+ #define AR71XX_PCI_MEM_SIZE	0x07000000
+@@ -81,15 +87,21 @@
+ 
+ #define AR933X_UART_BASE	(AR71XX_APB_BASE + 0x00020000)
+ #define AR933X_UART_SIZE	0x14
++#define AR933X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
++#define AR933X_GMAC_SIZE	0x04
+ #define AR933X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+ #define AR933X_WMAC_SIZE	0x20000
+ #define AR933X_EHCI_BASE	0x1b000000
+ #define AR933X_EHCI_SIZE	0x1000
+ 
++#define AR934X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
++#define AR934X_GMAC_SIZE	0x14
+ #define AR934X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE	0x20000
+ #define AR934X_EHCI_BASE	0x1b000000
+ #define AR934X_EHCI_SIZE	0x200
++#define AR934X_NFC_BASE		0x1b000200
++#define AR934X_NFC_SIZE		0xb8
+ #define AR934X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
+ #define AR934X_SRIF_SIZE	0x1000
+ 
+@@ -106,11 +118,15 @@
+ #define QCA955X_PCI_CTRL_BASE1	(AR71XX_APB_BASE + 0x00280000)
+ #define QCA955X_PCI_CTRL_SIZE	0x100
+ 
++#define QCA955X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
++#define QCA955X_GMAC_SIZE	0x40
+ #define QCA955X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+ #define QCA955X_WMAC_SIZE	0x20000
+ #define QCA955X_EHCI0_BASE	0x1b000000
+ #define QCA955X_EHCI1_BASE	0x1b400000
+ #define QCA955X_EHCI_SIZE	0x1000
++#define QCA955X_NFC_BASE	0x1b800200
++#define QCA955X_NFC_SIZE	0xb8
+ 
+ #define AR9300_OTP_BASE		0x14000
+ #define AR9300_OTP_STATUS	0x15f18
+@@ -174,6 +190,9 @@
+ #define AR71XX_AHB_DIV_SHIFT		20
+ #define AR71XX_AHB_DIV_MASK		0x7
+ 
++#define AR71XX_ETH0_PLL_SHIFT		17
++#define AR71XX_ETH1_PLL_SHIFT		19
++
+ #define AR724X_PLL_REG_CPU_CONFIG	0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG	0x18
+ 
+@@ -186,6 +205,8 @@
+ #define AR724X_DDR_DIV_SHIFT		22
+ #define AR724X_DDR_DIV_MASK		0x3
+ 
++#define AR7242_PLL_REG_ETH0_INT_CLOCK	0x2c
++
+ #define AR913X_PLL_REG_CPU_CONFIG	0x00
+ #define AR913X_PLL_REG_ETH_CONFIG	0x04
+ #define AR913X_PLL_REG_ETH0_INT_CLOCK	0x14
+@@ -198,6 +219,9 @@
+ #define AR913X_AHB_DIV_SHIFT		19
+ #define AR913X_AHB_DIV_MASK		0x1
+ 
++#define AR913X_ETH0_PLL_SHIFT		20
++#define AR913X_ETH1_PLL_SHIFT		22
++
+ #define AR933X_PLL_CPU_CONFIG_REG	0x00
+ #define AR933X_PLL_CLOCK_CTRL_REG	0x08
+ 
+@@ -219,6 +243,8 @@
+ #define AR934X_PLL_CPU_CONFIG_REG		0x00
+ #define AR934X_PLL_DDR_CONFIG_REG		0x04
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG		0x08
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG	0x24
++#define AR934X_PLL_ETH_XMII_CONTROL_REG		0x2c
+ 
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
+@@ -251,9 +277,13 @@
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL	BIT(21)
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL	BIT(24)
+ 
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL	BIT(6)
++
+ #define QCA955X_PLL_CPU_CONFIG_REG		0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG		0x04
+ #define QCA955X_PLL_CLK_CTRL_REG		0x08
++#define QCA955X_PLL_ETH_XMII_CONTROL_REG	0x28
++#define QCA955X_PLL_ETH_SGMII_CONTROL_REG	0x48
+ 
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
+@@ -378,16 +408,83 @@
+ #define AR913X_RESET_USB_HOST		BIT(5)
+ #define AR913X_RESET_USB_PHY		BIT(4)
+ 
++#define AR933X_RESET_GE1_MDIO		BIT(23)
++#define AR933X_RESET_GE0_MDIO		BIT(22)
++#define AR933X_RESET_GE1_MAC		BIT(13)
+ #define AR933X_RESET_WMAC		BIT(11)
++#define AR933X_RESET_GE0_MAC		BIT(9)
+ #define AR933X_RESET_USB_HOST		BIT(5)
+ #define AR933X_RESET_USB_PHY		BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE	BIT(3)
+ 
++#define AR934X_RESET_HOST		BIT(31)
++#define AR934X_RESET_SLIC		BIT(30)
++#define AR934X_RESET_HDMA		BIT(29)
++#define AR934X_RESET_EXTERNAL		BIT(28)
++#define AR934X_RESET_RTC		BIT(27)
++#define AR934X_RESET_PCIE_EP_INT	BIT(26)
++#define AR934X_RESET_CHKSUM_ACC		BIT(25)
++#define AR934X_RESET_FULL_CHIP		BIT(24)
++#define AR934X_RESET_GE1_MDIO		BIT(23)
++#define AR934X_RESET_GE0_MDIO		BIT(22)
++#define AR934X_RESET_CPU_NMI		BIT(21)
++#define AR934X_RESET_CPU_COLD		BIT(20)
++#define AR934X_RESET_HOST_RESET_INT	BIT(19)
++#define AR934X_RESET_PCIE_EP		BIT(18)
++#define AR934X_RESET_UART1		BIT(17)
++#define AR934X_RESET_DDR		BIT(16)
++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define AR934X_RESET_NANDF		BIT(14)
++#define AR934X_RESET_GE1_MAC		BIT(13)
++#define AR934X_RESET_ETH_SWITCH_ANALOG	BIT(12)
+ #define AR934X_RESET_USB_PHY_ANALOG	BIT(11)
++#define AR934X_RESET_HOST_DMA_INT	BIT(10)
++#define AR934X_RESET_GE0_MAC		BIT(9)
++#define AR934X_RESET_ETH_SWITCH		BIT(8)
++#define AR934X_RESET_PCIE_PHY		BIT(7)
++#define AR934X_RESET_PCIE		BIT(6)
+ #define AR934X_RESET_USB_HOST		BIT(5)
+ #define AR934X_RESET_USB_PHY		BIT(4)
+ #define AR934X_RESET_USBSUS_OVERRIDE	BIT(3)
++#define AR934X_RESET_LUT		BIT(2)
++#define AR934X_RESET_MBOX		BIT(1)
++#define AR934X_RESET_I2S		BIT(0)
++
++#define QCA955X_RESET_HOST		BIT(31)
++#define QCA955X_RESET_SLIC		BIT(30)
++#define QCA955X_RESET_HDMA		BIT(29)
++#define QCA955X_RESET_EXTERNAL		BIT(28)
++#define QCA955X_RESET_RTC		BIT(27)
++#define QCA955X_RESET_PCIE_EP_INT	BIT(26)
++#define QCA955X_RESET_CHKSUM_ACC	BIT(25)
++#define QCA955X_RESET_FULL_CHIP		BIT(24)
++#define QCA955X_RESET_GE1_MDIO		BIT(23)
++#define QCA955X_RESET_GE0_MDIO		BIT(22)
++#define QCA955X_RESET_CPU_NMI		BIT(21)
++#define QCA955X_RESET_CPU_COLD		BIT(20)
++#define QCA955X_RESET_HOST_RESET_INT	BIT(19)
++#define QCA955X_RESET_PCIE_EP		BIT(18)
++#define QCA955X_RESET_UART1		BIT(17)
++#define QCA955X_RESET_DDR		BIT(16)
++#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define QCA955X_RESET_NANDF		BIT(14)
++#define QCA955X_RESET_GE1_MAC		BIT(13)
++#define QCA955X_RESET_SGMII_ANALOG	BIT(12)
++#define QCA955X_RESET_USB_PHY_ANALOG	BIT(11)
++#define QCA955X_RESET_HOST_DMA_INT	BIT(10)
++#define QCA955X_RESET_GE0_MAC		BIT(9)
++#define QCA955X_RESET_SGMII		BIT(8)
++#define QCA955X_RESET_PCIE_PHY		BIT(7)
++#define QCA955X_RESET_PCIE		BIT(6)
++#define QCA955X_RESET_USB_HOST		BIT(5)
++#define QCA955X_RESET_USB_PHY		BIT(4)
++#define QCA955X_RESET_USBSUS_OVERRIDE	BIT(3)
++#define QCA955X_RESET_LUT		BIT(2)
++#define QCA955X_RESET_MBOX		BIT(1)
++#define QCA955X_RESET_I2S		BIT(0)
+ 
++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN	BIT(18)
++#define AR933X_BOOTSTRAP_EEPBUSY	BIT(4)
+ #define AR933X_BOOTSTRAP_REF_CLK_40	BIT(0)
+ 
+ #define AR934X_BOOTSTRAP_SW_OPTION8	BIT(23)
+@@ -529,6 +626,12 @@
+ #define AR71XX_GPIO_REG_INT_ENABLE	0x24
+ #define AR71XX_GPIO_REG_FUNC		0x28
+ 
++#define AR934X_GPIO_REG_OUT_FUNC0	0x2c
++#define AR934X_GPIO_REG_OUT_FUNC1	0x30
++#define AR934X_GPIO_REG_OUT_FUNC2	0x34
++#define AR934X_GPIO_REG_OUT_FUNC3	0x38
++#define AR934X_GPIO_REG_OUT_FUNC4	0x3c
++#define AR934X_GPIO_REG_OUT_FUNC5	0x40
+ #define AR934X_GPIO_REG_FUNC		0x6c
+ 
+ #define AR71XX_GPIO_COUNT		16
+@@ -560,4 +663,149 @@
+ #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT	13
+ #define AR934X_SRIF_DPLL2_OUTDIV_MASK	0x7
+ 
++#define AR71XX_GPIO_FUNC_STEREO_EN		BIT(17)
++#define AR71XX_GPIO_FUNC_SLIC_EN		BIT(16)
++#define AR71XX_GPIO_FUNC_SPI_CS2_EN		BIT(13)
++#define AR71XX_GPIO_FUNC_SPI_CS1_EN		BIT(12)
++#define AR71XX_GPIO_FUNC_UART_EN		BIT(8)
++#define AR71XX_GPIO_FUNC_USB_OC_EN		BIT(4)
++#define AR71XX_GPIO_FUNC_USB_CLK_EN		BIT(0)
++
++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN		BIT(19)
++#define AR724X_GPIO_FUNC_SPI_EN			BIT(18)
++#define AR724X_GPIO_FUNC_SPI_CS_EN2		BIT(14)
++#define AR724X_GPIO_FUNC_SPI_CS_EN1		BIT(13)
++#define AR724X_GPIO_FUNC_CLK_OBS5_EN		BIT(12)
++#define AR724X_GPIO_FUNC_CLK_OBS4_EN		BIT(11)
++#define AR724X_GPIO_FUNC_CLK_OBS3_EN		BIT(10)
++#define AR724X_GPIO_FUNC_CLK_OBS2_EN		BIT(9)
++#define AR724X_GPIO_FUNC_CLK_OBS1_EN		BIT(8)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN	BIT(7)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN	BIT(6)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN	BIT(5)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN	BIT(4)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN	BIT(3)
++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN	BIT(2)
++#define AR724X_GPIO_FUNC_UART_EN		BIT(1)
++#define AR724X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
++
++#define AR913X_GPIO_FUNC_WMAC_LED_EN		BIT(22)
++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN		BIT(21)
++#define AR913X_GPIO_FUNC_I2S_REFCLKEN		BIT(20)
++#define AR913X_GPIO_FUNC_I2S_MCKEN		BIT(19)
++#define AR913X_GPIO_FUNC_I2S1_EN		BIT(18)
++#define AR913X_GPIO_FUNC_I2S0_EN		BIT(17)
++#define AR913X_GPIO_FUNC_SLIC_EN		BIT(16)
++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN		BIT(9)
++#define AR913X_GPIO_FUNC_UART_EN		BIT(8)
++#define AR913X_GPIO_FUNC_USB_CLK_EN		BIT(4)
++
++#define AR933X_GPIO_FUNC_SPDIF2TCK		BIT(31)
++#define AR933X_GPIO_FUNC_SPDIF_EN		BIT(30)
++#define AR933X_GPIO_FUNC_I2SO_22_18_EN		BIT(29)
++#define AR933X_GPIO_FUNC_I2S_MCK_EN		BIT(27)
++#define AR933X_GPIO_FUNC_I2SO_EN		BIT(26)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL	BIT(25)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL	BIT(24)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT	BIT(23)
++#define AR933X_GPIO_FUNC_SPI_EN			BIT(18)
++#define AR933X_GPIO_FUNC_SPI_CS_EN2		BIT(14)
++#define AR933X_GPIO_FUNC_SPI_CS_EN1		BIT(13)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN	BIT(7)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN	BIT(6)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN	BIT(5)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN	BIT(4)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN	BIT(3)
++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN	BIT(2)
++#define AR933X_GPIO_FUNC_UART_EN		BIT(1)
++#define AR933X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
++
++#define AR934X_GPIO_FUNC_CLK_OBS7_EN		BIT(9)
++#define AR934X_GPIO_FUNC_CLK_OBS6_EN		BIT(8)
++#define AR934X_GPIO_FUNC_CLK_OBS5_EN		BIT(7)
++#define AR934X_GPIO_FUNC_CLK_OBS4_EN		BIT(6)
++#define AR934X_GPIO_FUNC_CLK_OBS3_EN		BIT(5)
++#define AR934X_GPIO_FUNC_CLK_OBS2_EN		BIT(4)
++#define AR934X_GPIO_FUNC_CLK_OBS1_EN		BIT(3)
++#define AR934X_GPIO_FUNC_CLK_OBS0_EN		BIT(2)
++#define AR934X_GPIO_FUNC_JTAG_DISABLE		BIT(1)
++
++#define AR934X_GPIO_OUT_GPIO		0
++#define AR934X_GPIO_OUT_SPI_CS1	7
++#define AR934X_GPIO_OUT_LED_LINK0	41
++#define AR934X_GPIO_OUT_LED_LINK1	42
++#define AR934X_GPIO_OUT_LED_LINK2	43
++#define AR934X_GPIO_OUT_LED_LINK3	44
++#define AR934X_GPIO_OUT_LED_LINK4	45
++#define AR934X_GPIO_OUT_EXT_LNA0	46
++#define AR934X_GPIO_OUT_EXT_LNA1	47
++
++/*
++ * MII_CTRL block
++ */
++#define AR71XX_MII_REG_MII0_CTRL	0x00
++#define AR71XX_MII_REG_MII1_CTRL	0x04
++
++#define AR71XX_MII_CTRL_IF_MASK		3
++#define AR71XX_MII_CTRL_SPEED_SHIFT	4
++#define AR71XX_MII_CTRL_SPEED_MASK	3
++#define AR71XX_MII_CTRL_SPEED_10	0
++#define AR71XX_MII_CTRL_SPEED_100	1
++#define AR71XX_MII_CTRL_SPEED_1000	2
++
++#define AR71XX_MII0_CTRL_IF_GMII	0
++#define AR71XX_MII0_CTRL_IF_MII		1
++#define AR71XX_MII0_CTRL_IF_RGMII	2
++#define AR71XX_MII0_CTRL_IF_RMII	3
++
++#define AR71XX_MII1_CTRL_IF_RGMII	0
++#define AR71XX_MII1_CTRL_IF_RMII	1
++
++/*
++ * AR933X GMAC interface
++ */
++#define AR933X_GMAC_REG_ETH_CFG		0x00
++
++#define AR933X_ETH_CFG_RGMII_GE0	BIT(0)
++#define AR933X_ETH_CFG_MII_GE0		BIT(1)
++#define AR933X_ETH_CFG_GMII_GE0		BIT(2)
++#define AR933X_ETH_CFG_MII_GE0_MASTER	BIT(3)
++#define AR933X_ETH_CFG_MII_GE0_SLAVE	BIT(4)
++#define AR933X_ETH_CFG_MII_GE0_ERR_EN	BIT(5)
++#define AR933X_ETH_CFG_SW_PHY_SWAP	BIT(7)
++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP	BIT(8)
++#define AR933X_ETH_CFG_RMII_GE0		BIT(9)
++#define AR933X_ETH_CFG_RMII_GE0_SPD_10	0
++#define AR933X_ETH_CFG_RMII_GE0_SPD_100	BIT(10)
++
++/*
++ * AR934X GMAC Interface
++ */
++#define AR934X_GMAC_REG_ETH_CFG		0x00
++
++#define AR934X_ETH_CFG_RGMII_GMAC0	BIT(0)
++#define AR934X_ETH_CFG_MII_GMAC0	BIT(1)
++#define AR934X_ETH_CFG_GMII_GMAC0	BIT(2)
++#define AR934X_ETH_CFG_MII_GMAC0_MASTER	BIT(3)
++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE	BIT(4)
++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN	BIT(5)
++#define AR934X_ETH_CFG_SW_ONLY_MODE	BIT(6)
++#define AR934X_ETH_CFG_SW_PHY_SWAP	BIT(7)
++#define AR934X_ETH_CFG_SW_APB_ACCESS	BIT(9)
++#define AR934X_ETH_CFG_RMII_GMAC0	BIT(10)
++#define AR933X_ETH_CFG_MII_CNTL_SPEED	BIT(11)
++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST	BIT(13)
++#define AR934X_ETH_CFG_RXD_DELAY        BIT(14)
++#define AR934X_ETH_CFG_RDV_DELAY        BIT(16)
++
++/*
++ * QCA955X GMAC Interface
++ */
++
++#define QCA955X_GMAC_REG_ETH_CFG	0x00
++
++#define QCA955X_ETH_CFG_RGMII_EN	BIT(0)
++#define QCA955X_ETH_CFG_GE0_SGMII	BIT(6)
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-3.18/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-3.18/602-MIPS-ath79-add-openwrt-stuff.patch
new file mode 100644
index 0000000000..a772d9b6e6
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/602-MIPS-ath79-add-openwrt-stuff.patch
@@ -0,0 +1,76 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -98,6 +98,20 @@ config SOC_QCA955X
+ 	select PCI_AR724X if PCI
+ 	def_bool n
+ 
++config ATH79_DEV_M25P80
++	select ATH79_DEV_SPI
++	def_bool n
++
++config ATH79_DEV_AP9X_PCI
++	select ATH79_PCI_ATH9K_FIXUP
++	def_bool n
++
++config ATH79_DEV_DSA
++	def_bool n
++
++config ATH79_DEV_ETH
++	def_bool n
++
+ config PCI_AR724X
+ 	def_bool n
+ 
+@@ -107,6 +121,10 @@ config ATH79_DEV_GPIO_BUTTONS
+ config ATH79_DEV_LEDS_GPIO
+ 	def_bool n
+ 
++config ATH79_DEV_NFC
++	depends on (SOC_AR934X || SOC_QCA955X)
++	def_bool n
++
+ config ATH79_DEV_SPI
+ 	def_bool n
+ 
+@@ -117,4 +135,13 @@ config ATH79_DEV_WMAC
+ 	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
+ 	def_bool n
+ 
++config ATH79_NVRAM
++	def_bool n
++
++config ATH79_PCI_ATH9K_FIXUP
++	def_bool n
++
++config ATH79_ROUTERBOOT
++	def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI)			+= pci.o
+ # Devices
+ #
+ obj-y					+= dev-common.o
++obj-$(CONFIG_ATH79_DEV_AP9X_PCI)	+= dev-ap9x-pci.o
++obj-$(CONFIG_ATH79_DEV_DSA)		+= dev-dsa.o
++obj-$(CONFIG_ATH79_DEV_ETH)		+= dev-eth.o
+ obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o
+ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)	+= dev-leds-gpio.o
++obj-$(CONFIG_ATH79_DEV_M25P80)		+= dev-m25p80.o
++obj-$(CONFIG_ATH79_DEV_NFC)		+= dev-nfc.o
+ obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
+ obj-$(CONFIG_ATH79_DEV_USB)		+= dev-usb.o
+ obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
+ 
+ #
++# Miscellaneous objects
++#
++obj-$(CONFIG_ATH79_NVRAM)		+= nvram.o
++obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)	+= pci-ath9k-fixup.o
++obj-$(CONFIG_ATH79_ROUTERBOOT)		+= routerboot.o
++
++#
+ # Machines
+ #
+ obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
diff --git a/target/linux/ar71xx/patches-3.18/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-3.18/603-MIPS-ath79-ap121-fixes.patch
new file mode 100644
index 0000000000..b385b9e00b
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/603-MIPS-ath79-ap121-fixes.patch
@@ -0,0 +1,163 @@
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -1,19 +1,21 @@
+ /*
+  *  Atheros AP121 board support
+  *
+- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+  */
+ 
+-#include "machtypes.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
++#include "machtypes.h"
+ 
+ #define AP121_GPIO_LED_WLAN		0
+ #define AP121_GPIO_LED_USB		1
+@@ -24,7 +26,14 @@
+ #define AP121_KEYS_POLL_INTERVAL	20	/* msecs */
+ #define AP121_KEYS_DEBOUNCE_INTERVAL	(3 * AP121_KEYS_POLL_INTERVAL)
+ 
+-#define AP121_CAL_DATA_ADDR	0x1fff1000
++#define AP121_MAC0_OFFSET		0x0000
++#define AP121_MAC1_OFFSET		0x0006
++#define AP121_CALDATA_OFFSET		0x1000
++#define AP121_WMAC_MAC_OFFSET		0x1002
++
++#define AP121_MINI_GPIO_LED_WLAN	0
++#define AP121_MINI_GPIO_BTN_JUMPSTART	12
++#define AP121_MINI_GPIO_BTN_RESET	11
+ 
+ static struct gpio_led ap121_leds_gpio[] __initdata = {
+ 	{
+@@ -58,41 +67,78 @@ static struct gpio_keys_button ap121_gpi
+ 	}
+ };
+ 
+-static struct ath79_spi_controller_data ap121_spi0_data = {
+-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-	.cs_line = 0,
++static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
++	{
++		.name		= "ap121:green:wlan",
++		.gpio		= AP121_MINI_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},
+ };
+ 
+-static struct spi_board_info ap121_spi_info[] = {
++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
+ 	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "mx25l1606e",
+-		.controller_data = &ap121_spi0_data,
++		.desc		= "jumpstart button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP121_MINI_GPIO_BTN_JUMPSTART,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP121_MINI_GPIO_BTN_RESET,
++		.active_low	= 1,
+ 	}
+ };
+ 
+-static struct ath79_spi_platform_data ap121_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect = 1,
+-};
++static void __init ap121_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_wmac(art + AP121_CALDATA_OFFSET,
++			    art + AP121_WMAC_MAC_OFFSET);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++
++	/* WAN port */
++	ath79_register_eth(0);
++}
+ 
+ static void __init ap121_setup(void)
+ {
+-	u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
++	ap121_common_setup();
+ 
+ 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+ 				 ap121_leds_gpio);
+ 	ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+ 					ARRAY_SIZE(ap121_gpio_keys),
+ 					ap121_gpio_keys);
+-
+-	ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+-			   ARRAY_SIZE(ap121_spi_info));
+ 	ath79_register_usb();
+-	ath79_register_wmac(cal_data, NULL);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+ 	     ap121_setup);
++
++static void __init ap121_mini_setup(void)
++{
++	ap121_common_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
++				 ap121_mini_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ap121_mini_gpio_keys),
++					ap121_mini_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
++	     ap121_mini_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
+ config ATH79_MACH_AP121
+ 	bool "Atheros AP121 reference board"
+ 	select SOC_AR933X
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+ 	help
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -17,6 +17,7 @@
+ enum ath79_mach_type {
+ 	ATH79_MACH_GENERIC = 0,
+ 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
++	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
+ 	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
+ 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
+ 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
diff --git a/target/linux/ar71xx/patches-3.18/604-MIPS-ath79-ap81-fixes.patch b/target/linux/ar71xx/patches-3.18/604-MIPS-ath79-ap81-fixes.patch
new file mode 100644
index 0000000000..bbfdd49dbc
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/604-MIPS-ath79-ap81-fixes.patch
@@ -0,0 +1,128 @@
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -9,12 +9,16 @@
+  *  by the Free Software Foundation.
+  */
+ 
+-#include "machtypes.h"
+-#include "dev-wmac.h"
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
+ #include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
+ 
+ #define AP81_GPIO_LED_STATUS	1
+ #define AP81_GPIO_LED_AOSS	3
+@@ -29,6 +33,37 @@
+ 
+ #define AP81_CAL_DATA_ADDR	0x1fff1000
+ 
++static struct mtd_partition ap81_partitions[] = {
++	{
++		.name		= "u-boot",
++		.offset		= 0,
++		.size		= 0x040000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "u-boot-env",
++		.offset		= 0x040000,
++		.size		= 0x010000,
++	}, {
++		.name		= "rootfs",
++		.offset		= 0x050000,
++		.size		= 0x500000,
++	}, {
++		.name		= "uImage",
++		.offset		= 0x550000,
++		.size		= 0x100000,
++	}, {
++		.name		= "ART",
++		.offset		= 0x650000,
++		.size		= 0x1b0000,
++		.mask_flags	= MTD_WRITEABLE,
++	}
++};
++
++static struct flash_platform_data ap81_flash_data = {
++	.parts		= ap81_partitions,
++	.nr_parts	= ARRAY_SIZE(ap81_partitions),
++};
++
+ static struct gpio_led ap81_leds_gpio[] __initdata = {
+ 	{
+ 		.name		= "ap81:green:status",
+@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
+ 	}
+ };
+ 
+-static struct ath79_spi_controller_data ap81_spi0_data = {
+-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-	.cs_line = 0,
+-};
+-
+-static struct spi_board_info ap81_spi_info[] = {
+-	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "m25p64",
+-		.controller_data = &ap81_spi0_data,
+-	}
+-};
+-
+-static struct ath79_spi_platform_data ap81_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect = 1,
+-};
+-
+ static void __init ap81_setup(void)
+ {
+ 	u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
+@@ -96,10 +111,24 @@ static void __init ap81_setup(void)
+ 	ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+ 					ARRAY_SIZE(ap81_gpio_keys),
+ 					ap81_gpio_keys);
+-	ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+-			   ARRAY_SIZE(ap81_spi_info));
++	ath79_register_m25p80(&ap81_flash_data);
+ 	ath79_register_wmac(cal_data, NULL);
+ 	ath79_register_usb();
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.has_ar8216 = 1;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -30,9 +30,10 @@ config ATH79_MACH_AP136
+ config ATH79_MACH_AP81
+ 	bool "Atheros AP81 reference board"
+ 	select SOC_AR913X
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+ 	help
diff --git a/target/linux/ar71xx/patches-3.18/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.18/605-MIPS-ath79-db120-fixes.patch
new file mode 100644
index 0000000000..b494f9305f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/605-MIPS-ath79-db120-fixes.patch
@@ -0,0 +1,209 @@
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -2,7 +2,7 @@
+  * Atheros DB120 reference board support
+  *
+  * Copyright (c) 2011 Qualcomm Atheros
+- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  * Permission to use, copy, modify, and/or distribute this software for any
+  * purpose with or without fee is hereby granted, provided that the above
+@@ -19,16 +19,26 @@
+  */
+ 
+ #include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+ 
++#define DB120_GPIO_LED_USB		11
+ #define DB120_GPIO_LED_WLAN_5G		12
+ #define DB120_GPIO_LED_WLAN_2G		13
+ #define DB120_GPIO_LED_STATUS		14
+@@ -39,8 +49,10 @@
+ #define DB120_KEYS_POLL_INTERVAL	20	/* msecs */
+ #define DB120_KEYS_DEBOUNCE_INTERVAL	(3 * DB120_KEYS_POLL_INTERVAL)
+ 
+-#define DB120_WMAC_CALDATA_OFFSET 0x1000
+-#define DB120_PCIE_CALDATA_OFFSET 0x5000
++#define DB120_MAC0_OFFSET		0
++#define DB120_MAC1_OFFSET		6
++#define DB120_WMAC_CALDATA_OFFSET	0x1000
++#define DB120_PCIE_CALDATA_OFFSET	0x5000
+ 
+ static struct gpio_led db120_leds_gpio[] __initdata = {
+ 	{
+@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
+ 		.gpio		= DB120_GPIO_LED_WLAN_2G,
+ 		.active_low	= 1,
+ 	},
++	{
++		.name		= "db120:green:usb",
++		.gpio		= DB120_GPIO_LED_USB,
++		.active_low	= 1,
++	}
+ };
+ 
+ static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi
+ 	},
+ };
+ 
+-static struct ath79_spi_controller_data db120_spi0_data = {
+-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-	.cs_line = 0,
++static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ };
+ 
+-static struct spi_board_info db120_spi_info[] = {
+-	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "s25sl064a",
+-		.controller_data = &db120_spi0_data,
+-	}
++static struct ar8327_led_cfg db120_ar8327_led_cfg = {
++	.led_ctrl0 = 0x00000000,
++	.led_ctrl1 = 0xc737c737,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x00c30c00,
++	.open_drain = true,
+ };
+ 
+-static struct ath79_spi_platform_data db120_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect = 1,
++static struct ar8327_platform_data db120_ar8327_data = {
++	.pad0_cfg = &db120_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &db120_ar8327_led_cfg,
+ };
+ 
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data db120_ath9k_data;
+-
+-static int db120_pci_plat_dev_init(struct pci_dev *dev)
+-{
+-	switch (PCI_SLOT(dev->devfn)) {
+-	case 0:
+-		dev->dev.platform_data = &db120_ath9k_data;
+-		break;
+-	}
+-
+-	return 0;
+-}
+-
+-static void __init db120_pci_init(u8 *eeprom)
+-{
+-	memcpy(db120_ath9k_data.eeprom_data, eeprom,
+-	       sizeof(db120_ath9k_data.eeprom_data));
+-
+-	ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+-	ath79_register_pci();
+-}
+-#else
+-static inline void db120_pci_init(u8 *eeprom) {}
+-#endif /* CONFIG_PCI */
++static struct mdio_board_info db120_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &db120_ar8327_data,
++	},
++};
+ 
+ static void __init db120_setup(void)
+ {
+ 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ 
++	ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
++	ath79_register_m25p80(NULL);
++
+ 	ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+ 				 db120_leds_gpio);
+ 	ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+ 					ARRAY_SIZE(db120_gpio_keys),
+ 					db120_gpio_keys);
+-	ath79_register_spi(&db120_spi_data, db120_spi_info,
+-			   ARRAY_SIZE(db120_spi_info));
+ 	ath79_register_usb();
+ 	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+-	db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
++	ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
++
++	mdiobus_register_board_info(db120_mdio0_info,
++				    ARRAY_SIZE(db120_mdio0_info));
++
++	/* GMAC0 is connected to an AR8327 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(1);
++
++	ath79_register_nfc();
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -43,9 +43,12 @@ config ATH79_MACH_AP81
+ config ATH79_MACH_DB120
+ 	bool "Atheros DB120 reference board"
+ 	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_NFC
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+ 	help
diff --git a/target/linux/ar71xx/patches-3.18/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.18/606-MIPS-ath79-pb44-fixes.patch
new file mode 100644
index 0000000000..f9ec7753f1
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/606-MIPS-ath79-pb44-fixes.patch
@@ -0,0 +1,153 @@
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -8,23 +8,48 @@
+  *  by the Free Software Foundation.
+  */
+ 
++#include <linux/delay.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
+ #include <linux/i2c/pcf857x.h>
++#include <linux/i2c/pcf857x.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/vsc7385.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "machtypes.h"
+ #include "pci.h"
+ 
+ #define PB44_GPIO_I2C_SCL	0
+ #define PB44_GPIO_I2C_SDA	1
+ 
++#define PB44_PCF8757_VSC7395_CS	0
++#define PB44_PCF8757_STEREO_CS	1
++#define PB44_PCF8757_SLIC_CS0	2
++#define PB44_PCF8757_SLIC_TEST	3
++#define PB44_PCF8757_SLIC_INT0	4
++#define PB44_PCF8757_SLIC_INT1	5
++#define PB44_PCF8757_SW_RESET	6
++#define PB44_PCF8757_SW_JUMP	8
++#define PB44_PCF8757_LED_JUMP1	9
++#define PB44_PCF8757_LED_JUMP2	10
++#define PB44_PCF8757_TP24	11
++#define PB44_PCF8757_TP25	12
++#define PB44_PCF8757_TP26	13
++#define PB44_PCF8757_TP27	14
++#define PB44_PCF8757_TP28	15
++
+ #define PB44_GPIO_EXP_BASE	16
++#define PB44_GPIO_VSC7395_CS	(PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+ #define PB44_GPIO_SW_RESET	(PB44_GPIO_EXP_BASE + 6)
+ #define PB44_GPIO_SW_JUMP	(PB44_GPIO_EXP_BASE + 8)
+ #define PB44_GPIO_LED_JUMP1	(PB44_GPIO_EXP_BASE + 9)
+@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
+ 	.cs_line = 0,
+ };
+ 
++static struct ath79_spi_controller_data pb44_spi1_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_GPIO,
++	.cs_line = PB44_GPIO_VSC7395_CS,
++};
++
++static void pb44_vsc7395_reset(void)
++{
++	ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++	udelay(10);
++	ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++	mdelay(50);
++}
++
++static struct vsc7385_platform_data pb44_vsc7395_data = {
++	.reset		= pb44_vsc7395_reset,
++	.ucode_name	= "vsc7395_ucode_pb44.bin",
++	.mac_cfg = {
++		.tx_ipg		= 6,
++		.bit2		= 1,
++		.clk_sel	= 0,
++	},
++};
++
++static const char *pb44_part_probes[] = {
++	"RedBoot",
++	NULL,
++};
++
++static struct flash_platform_data pb44_flash_data = {
++	.part_probes	= pb44_part_probes,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+ 	{
+ 		.bus_num	= 0,
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 25000000,
+ 		.modalias	= "m25p64",
++		.platform_data	= &pb44_flash_data,
+ 		.controller_data = &pb44_spi0_data,
+ 	},
++	{
++		.bus_num	= 0,
++		.chip_select	= 1,
++		.max_speed_hz	= 25000000,
++		.modalias	= "spi-vsc7385",
++		.platform_data	= &pb44_vsc7395_data,
++		.controller_data = &pb44_spi1_data,
++	}
+ };
+ 
+ static struct ath79_spi_platform_data pb44_spi_data = {
+ 	.bus_num		= 0,
+-	.num_chipselect		= 1,
++	.num_chipselect		= 2,
+ };
+ 
++#define PB44_WAN_PHYMASK	BIT(0)
++#define PB44_LAN_PHYMASK	0
++#define PB44_MDIO_PHYMASK	(PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
++
+ static void __init pb44_init(void)
+ {
+ 	i2c_register_board_info(0, pb44_i2c_board_info,
+@@ -122,6 +192,22 @@ static void __init pb44_init(void)
+ 			   ARRAY_SIZE(pb44_spi_info));
+ 	ath79_register_usb();
+ 	ath79_register_pci();
++
++	ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
++
++	ath79_register_eth(0);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++	ath79_register_eth(1);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -58,6 +58,7 @@ config ATH79_MACH_DB120
+ config ATH79_MACH_PB44
+ 	bool "Atheros PB44 reference board"
+ 	select SOC_AR71XX
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+ 	select ATH79_DEV_SPI
diff --git a/target/linux/ar71xx/patches-3.18/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-3.18/607-MIPS-ath79-ubnt-xm-fixes.patch
new file mode 100644
index 0000000000..cbbe20b49c
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/607-MIPS-ath79-ubnt-xm-fixes.patch
@@ -0,0 +1,109 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -70,9 +70,10 @@ config ATH79_MACH_PB44
+ config ATH79_MACH_UBNT_XM
+ 	bool "Ubiquiti Networks XM (rev 1.0) board"
+ 	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
+ 	help
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -16,10 +16,11 @@
+ 
+ #include <asm/mach-ath79/irq.h>
+ 
+-#include "machtypes.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
+ #include "pci.h"
+ 
+ #define UBNT_XM_GPIO_LED_L1		0
+@@ -32,7 +33,7 @@
+ #define UBNT_XM_KEYS_POLL_INTERVAL	20
+ #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_XM_KEYS_POLL_INTERVAL)
+ 
+-#define UBNT_XM_EEPROM_ADDR		(u8 *) KSEG1ADDR(0x1fff1000)
++#define UBNT_XM_EEPROM_ADDR		0x1fff1000
+ 
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ 	{
+@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g
+ 	}
+ };
+ 
+-static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
+-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-	.cs_line = 0,
+-};
+-
+-static struct spi_board_info ubnt_xm_spi_info[] = {
+-	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "mx25l6405d",
+-		.controller_data = &ubnt_xm_spi0_data,
+-	}
+-};
+-
+-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+-	.bus_num		= 0,
+-	.num_chipselect		= 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ubnt_xm_eeprom_data;
+-
+-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+-{
+-	switch (PCI_SLOT(dev->devfn)) {
+-	case 0:
+-		dev->dev.platform_data = &ubnt_xm_eeprom_data;
+-		break;
+-	}
+-
+-	return 0;
+-}
+-
+-static void __init ubnt_xm_pci_init(void)
+-{
+-	memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+-	       sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-
+-	ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+-	ath79_register_pci();
+-}
+-#else
+-static inline void ubnt_xm_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+-
+ static void __init ubnt_xm_init(void)
+ {
++	u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++
+ 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ 				 ubnt_xm_leds_gpio);
+ 
+@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void)
+ 					ARRAY_SIZE(ubnt_xm_gpio_keys),
+ 					ubnt_xm_gpio_keys);
+ 
+-	ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+-			   ARRAY_SIZE(ubnt_xm_spi_info));
+-
+-	ubnt_xm_pci_init();
++	ath79_register_m25p80(NULL);
++	ap91_pci_init(eeprom, NULL);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
diff --git a/target/linux/ar71xx/patches-3.18/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.18/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
new file mode 100644
index 0000000000..78035131db
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
@@ -0,0 +1,531 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -12,16 +12,24 @@
+ 
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/etherdevice.h>
++#include <linux/ar8216_platform.h>
+ 
++#include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/irq.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
+ 
++#include "common.h"
+ #include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
+ #include "machtypes.h"
+-#include "pci.h"
+ 
+ #define UBNT_XM_GPIO_LED_L1		0
+ #define UBNT_XM_GPIO_LED_L2		1
+@@ -37,19 +45,19 @@
+ 
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ 	{
+-		.name		= "ubnt-xm:red:link1",
++		.name		= "ubnt:red:link1",
+ 		.gpio		= UBNT_XM_GPIO_LED_L1,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:orange:link2",
++		.name		= "ubnt:orange:link2",
+ 		.gpio		= UBNT_XM_GPIO_LED_L2,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:green:link3",
++		.name		= "ubnt:green:link3",
+ 		.gpio		= UBNT_XM_GPIO_LED_L3,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:green:link4",
++		.name		= "ubnt:green:link4",
+ 		.gpio		= UBNT_XM_GPIO_LED_L4,
+ 		.active_low	= 0,
+ 	},
+@@ -66,9 +74,13 @@ static struct gpio_keys_button ubnt_xm_g
+ 	}
+ };
+ 
++#define UBNT_M_WAN_PHYMASK	BIT(4)
++
+ static void __init ubnt_xm_init(void)
+ {
+ 	u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+ 
+ 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ 				 ubnt_xm_leds_gpio);
+@@ -79,9 +91,428 @@ static void __init ubnt_xm_init(void)
+ 
+ 	ath79_register_m25p80(NULL);
+ 	ap91_pci_init(eeprom, NULL);
++
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+ 	     "UBNT-XM",
+ 	     "Ubiquiti Networks XM (rev 1.0) board",
+ 	     ubnt_xm_init);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
++	     ubnt_xm_init);
++
++static void __init ubnt_rocket_m_setup(void)
++{
++	ubnt_xm_init();
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
++	     ubnt_rocket_m_setup);
++
++static void __init ubnt_nano_m_setup(void)
++{
++	ubnt_xm_init();
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
++	     ubnt_nano_m_setup);
++
++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:green:globe",
++		.gpio		= 0,
++		.active_low	= 1,
++	}, {
++	        .name		= "ubnt:green:power",
++		.gpio		= 11,
++		.active_low	= 1,
++		.default_state  = LEDS_GPIO_DEFSTATE_ON,
++	}
++};
++
++static void __init ubnt_airrouter_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++	ath79_register_usb();
++
++	ap91_pci_init(ee, NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
++				 ubnt_airrouter_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
++	     ubnt_airrouter_setup);
++
++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:orange:dome",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:dome",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:orange:front",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:front",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:white:front",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:blue:front",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
++
++
++static void __init ubnt_unifi_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_register_eth(0);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
++				 ubnt_unifi_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
++	     ubnt_unifi_setup);
++
++
++#define UBNT_UNIFIOD_PRI_PHYMASK	BIT(4)
++#define UBNT_UNIFIOD_2ND_PHYMASK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
++
++static void __init ubnt_unifi_outdoor_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++				 UBNT_UNIFIOD_2ND_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
++				 ubnt_unifi_outdoor_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
++	     "Ubiquiti UniFiAP Outdoor",
++	     ubnt_unifi_outdoor_setup);
++
++
++static void __init ubnt_unifi_outdoor_plus_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++				 UBNT_UNIFIOD_2ND_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
++				 ubnt_unifi_outdoor_plus_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
++	     "Ubiquiti UniFiAP Outdoor+",
++	     ubnt_unifi_outdoor_plus_setup);
++
++
++static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
++	{
++		.name		= "ubnt:white:dome",
++		.gpio		= 12,
++	}, {
++		.name		= "ubnt:blue:dome",
++		.gpio		= 13,
++	}
++};
++
++static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
++	{
++		.desc			= "reset",
++		.type			= EV_KEY,
++		.code			= KEY_RESTART,
++		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++		.gpio			= 17,
++		.active_low		= 1,
++	}
++};
++
++static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data uap_pro_ar8327_data = {
++	.pad0_cfg = &uap_pro_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info uap_pro_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &uap_pro_ar8327_data,
++	},
++};
++
++#define UAP_PRO_MAC0_OFFSET		0x0000
++#define UAP_PRO_MAC1_OFFSET		0x0006
++#define UAP_PRO_WMAC_CALDATA_OFFSET	0x1000
++#define UAP_PRO_PCI_CALDATA_OFFSET	0x5000
++
++static void __init ubnt_uap_pro_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
++				 ubnt_uap_pro_gpio_leds);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(uap_pro_gpio_keys),
++                                        uap_pro_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++	ath79_register_mdio(0, 0x0);
++	mdiobus_register_board_info(uap_pro_mdio0_info,
++				    ARRAY_SIZE(uap_pro_mdio0_info));
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	/* GMAC0 is connected to an AR8327 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
++	     ubnt_uap_pro_setup);
++
++#define UBNT_XW_GPIO_LED_L1		11
++#define UBNT_XW_GPIO_LED_L2		16
++#define UBNT_XW_GPIO_LED_L3		13
++#define UBNT_XW_GPIO_LED_L4		14
++
++static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:red:link1",
++		.gpio		= UBNT_XW_GPIO_LED_L1,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:orange:link2",
++		.gpio		= UBNT_XW_GPIO_LED_L2,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link3",
++		.gpio		= UBNT_XW_GPIO_LED_L3,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link4",
++		.gpio		= UBNT_XW_GPIO_LED_L4,
++		.active_low	= 1,
++	},
++};
++
++static void __init ubnt_xw_init(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
++				 ubnt_xw_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++}
++
++static void __init ubnt_nano_m_xw_setup(void)
++{
++	ubnt_xw_init();
++
++	/* GMAC0 is connected to an AR8326 switch */
++	ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
++	ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_register_eth(0);
++}
++
++static void __init ubnt_loco_m_xw_setup(void)
++{
++	ubnt_xw_init();
++
++	ath79_register_mdio(0, ~BIT(1));
++	ath79_eth0_data.phy_mask = BIT(1);
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
++	     ubnt_nano_m_xw_setup);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
++	     ubnt_loco_m_xw_setup);
++
++static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
++	{
++		.name	   = "ubnt:blue:wlan",
++		.gpio	   = 0,
++	}, {
++		.name	   = "ubnt:white:status",
++		.gpio	   = 1,
++	},
++};
++
++static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 12,
++		.active_low	= 1,
++	}
++};
++
++static void __init ubnt_airgateway_setup(void)
++{
++	u32 t;
++	u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
++	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
++				 ubnt_airgateway_gpio_leds);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(airgateway_gpio_keys),
++					airgateway_gpio_keys);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
++	     ubnt_airgateway_setup);
++
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -68,12 +68,16 @@ config ATH79_MACH_PB44
+ 	  Atheros PB44 reference board.
+ 
+ config ATH79_MACH_UBNT_XM
+-	bool "Ubiquiti Networks XM (rev 1.0) board"
++	bool "Ubiquiti Networks XM/UniFi boards"
+ 	select SOC_AR724X
++	select SOC_AR934X
+ 	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+ 	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
+ 	help
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -22,6 +22,13 @@ enum ath79_mach_type {
+ 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
+ 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
+ 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
++	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
++	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
++	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */
++	ATH79_MACH_UBNT_ROCKET_M,	/* Ubiquiti Rocket M */
++	ATH79_MACH_UBNT_UAP_PRO,	/* Ubiquiti UniFi AP Pro */
++	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
++	ATH79_MACH_UBNT_UNIFI_OUTDOOR,	/* Ubiquiti UnifiAP Outdoor */
+ 	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
+ };
+ 
diff --git a/target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch
new file mode 100644
index 0000000000..ef0ae9a323
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch
@@ -0,0 +1,316 @@
+--- a/arch/mips/ath79/mach-ap136.c
++++ b/arch/mips/ath79/mach-ap136.c
+@@ -18,23 +18,29 @@
+  *
+  */
+ 
+-#include <linux/pci.h>
+-#include <linux/ath9k_platform.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
++#include "dev-eth.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+ 
+-#define AP136_GPIO_LED_STATUS_RED	14
+-#define AP136_GPIO_LED_STATUS_GREEN	19
+ #define AP136_GPIO_LED_USB		4
+-#define AP136_GPIO_LED_WLAN_2G		13
+ #define AP136_GPIO_LED_WLAN_5G		12
++#define AP136_GPIO_LED_WLAN_2G		13
++#define AP136_GPIO_LED_STATUS_RED	14
+ #define AP136_GPIO_LED_WPS_RED		15
++#define AP136_GPIO_LED_STATUS_GREEN	19
+ #define AP136_GPIO_LED_WPS_GREEN	20
+ 
+ #define AP136_GPIO_BTN_WPS		16
+@@ -43,37 +49,39 @@
+ #define AP136_KEYS_POLL_INTERVAL	20	/* msecs */
+ #define AP136_KEYS_DEBOUNCE_INTERVAL	(3 * AP136_KEYS_POLL_INTERVAL)
+ 
+-#define AP136_WMAC_CALDATA_OFFSET 0x1000
+-#define AP136_PCIE_CALDATA_OFFSET 0x5000
++#define AP136_MAC0_OFFSET		0
++#define AP136_MAC1_OFFSET		6
++#define AP136_WMAC_CALDATA_OFFSET	0x1000
++#define AP136_PCIE_CALDATA_OFFSET	0x5000
+ 
+ static struct gpio_led ap136_leds_gpio[] __initdata = {
+ 	{
+-		.name		= "qca:green:status",
++		.name		= "ap136:green:status",
+ 		.gpio		= AP136_GPIO_LED_STATUS_GREEN,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:red:status",
++		.name		= "ap136:red:status",
+ 		.gpio		= AP136_GPIO_LED_STATUS_RED,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:green:wps",
++		.name		= "ap136:green:wps",
+ 		.gpio		= AP136_GPIO_LED_WPS_GREEN,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:red:wps",
++		.name		= "ap136:red:wps",
+ 		.gpio		= AP136_GPIO_LED_WPS_RED,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:red:wlan-2g",
++		.name		= "ap136:red:wlan-2g",
+ 		.gpio		= AP136_GPIO_LED_WLAN_2G,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:red:usb",
++		.name		= "ap136:red:usb",
+ 		.gpio		= AP136_GPIO_LED_USB,
+ 		.active_low	= 1,
+ 	}
+@@ -98,65 +106,151 @@ static struct gpio_keys_button ap136_gpi
+ 	},
+ };
+ 
+-static struct ath79_spi_controller_data ap136_spi0_data = {
+-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-	.cs_line = 0,
++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
++static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
++
++static struct ar8327_platform_data ap136_ar8327_data = {
++	.pad0_cfg = &ap136_ar8327_pad0_cfg,
++	.pad6_cfg = &ap136_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
+ };
+ 
+-static struct spi_board_info ap136_spi_info[] = {
++static struct mdio_board_info ap136_mdio0_info[] = {
+ 	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "mx25l6405d",
+-		.controller_data = &ap136_spi0_data,
+-	}
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &ap136_ar8327_data,
++	},
+ };
+ 
+-static struct ath79_spi_platform_data ap136_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect	= 1,
+-};
++static void __init ap136_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
++				 ap136_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ap136_gpio_keys),
++					ap136_gpio_keys);
++
++	ath79_register_usb();
++	ath79_register_nfc();
++
++	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+ 
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ap136_ath9k_data;
++	ath79_register_mdio(0, 0x0);
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
+ 
+-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
++	mdiobus_register_board_info(ap136_mdio0_info,
++				    ARRAY_SIZE(ap136_mdio0_info));
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected tot eh SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(1);
++}
++
++static void __init ap136_010_setup(void)
+ {
+-	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+-		dev->dev.platform_data = &ap136_ath9k_data;
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ 
+-	return 0;
++	/* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
++	ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
++	ap136_ar8327_pad0_cfg.txclk_delay_en = true;
++	ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
++	ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++	ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++
++	/* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
++	ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
++	ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++	ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
++
++	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ap136_common_setup();
++	ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
+ }
+ 
+-static void __init ap136_pci_init(u8 *eeprom)
++MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
++	     "Atheros AP136-010 reference board",
++	     ap136_010_setup);
++
++static void __init ap136_020_common_setup(void)
+ {
+-	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+-	       sizeof(ap136_ath9k_data.eeprom_data));
++	/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
++	ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
++	ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
++
++	/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
++	ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
++	ap136_ar8327_pad6_cfg.txclk_delay_en = true;
++	ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++	ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++	ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+ 
+-	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+-	ath79_register_pci();
++	ath79_eth0_pll_data.pll_1000 = 0x56000000;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ap136_common_setup();
+ }
+-#else
+-static inline void ap136_pci_init(u8 *eeprom) {}
+-#endif /* CONFIG_PCI */
+ 
+-static void __init ap136_setup(void)
++static void __init ap136_020_setup(void)
+ {
+ 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ 
+-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+-				 ap136_leds_gpio);
+-	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+-					ARRAY_SIZE(ap136_gpio_keys),
+-					ap136_gpio_keys);
+-	ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+-			   ARRAY_SIZE(ap136_spi_info));
+-	ath79_register_usb();
+-	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+-	ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
++	ap136_020_common_setup();
++	ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
+ }
+ 
+-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
+-	     "Atheros AP136-010 reference board",
+-	     ap136_setup);
++MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
++	     "Atheros AP136-020 reference board",
++	     ap136_020_setup);
++
++/*
++ * AP135-020 is similar to AP136-020, any future AP135 specific init
++ * code can be added here.
++ */
++static void __init ap135_020_setup(void)
++{
++	ap136_leds_gpio[0].name = "ap135:green:status";
++	ap136_leds_gpio[1].name = "ap135:red:status";
++	ap136_leds_gpio[2].name = "ap135:green:wps";
++	ap136_leds_gpio[3].name = "ap135:red:wps";
++	ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
++	ap136_leds_gpio[5].name = "ap135:red:usb";
++
++	ap136_020_common_setup();
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
++	     "Atheros AP135-020 reference board",
++	     ap135_020_setup);
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -18,7 +18,9 @@ enum ath79_mach_type {
+ 	ATH79_MACH_GENERIC = 0,
+ 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
+ 	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
++	ATH79_MACH_AP135_020,		/* Atheros AP135-020 reference board */
+ 	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
++	ATH79_MACH_AP136_020,		/* Atheros AP136-020 reference board */
+ 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
+ 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
+ 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -16,16 +16,17 @@ config ATH79_MACH_AP121
+ 	  Atheros AP121 reference board.
+ 
+ config ATH79_MACH_AP136
+-	bool "Atheros AP136 reference board"
++	bool "Atheros AP136/AP135 reference board"
+ 	select SOC_QCA955X
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_NFC
+ 	select ATH79_DEV_SPI
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+ 	help
+ 	  Say 'Y' here if you want your kernel to support the
+-	  Atheros AP136 reference board.
++	  Atheros AP136 or AP135 reference boards.
+ 
+ config ATH79_MACH_AP81
+ 	bool "Atheros AP81 reference board"
diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
new file mode 100644
index 0000000000..ce839f4b01
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
@@ -0,0 +1,1506 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -16,22 +16,188 @@
+ 
+ enum ath79_mach_type {
+ 	ATH79_MACH_GENERIC = 0,
++	ATH79_MACH_ALFA_AP96,		/* ALFA Network AP96 board */
++	ATH79_MACH_ALFA_NX,		/* ALFA Network N2/N5 board */
++	ATH79_MACH_ALL0258N,		/* Allnet ALL0258N */
++	ATH79_MACH_ALL0305,		/* Allnet ALL0305 */
++	ATH79_MACH_ALL0315N,		/* Allnet ALL0315N */
++	ATH79_MACH_AP113,		/* Atheros AP113 reference board */
+ 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
+ 	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
++	ATH79_MACH_AP132,		/* Atheros AP132 reference board */
+ 	ATH79_MACH_AP135_020,		/* Atheros AP135-020 reference board */
+ 	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
+ 	ATH79_MACH_AP136_020,		/* Atheros AP136-020 reference board */
+ 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
++	ATH79_MACH_AP83,		/* Atheros AP83 */
++	ATH79_MACH_AP96,		/* Atheros AP96 */
++	ATH79_MACH_ARCHER_C5,		/* TP-LINK Archer C5 board */
++	ATH79_MACH_ARCHER_C7,		/* TP-LINK Archer C7 board */
++	ATH79_MACH_AW_NR580,		/* AzureWave AW-NR580 */
++	ATH79_MACH_BHU_BXU2000N2_A1,	/* BHU BXU2000n-2 A1 */
++	ATH79_MACH_CAP4200AG,		/* Senao CAP4200AG */
++	ATH79_MACH_CARAMBOLA2,		/* 8devices Carambola2 */
++	ATH79_MACH_CPE510,		/* TP-LINK CPE510 */
+ 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
+ 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
++	ATH79_MACH_DGL_5500_A1,		/* D-link DGL-5500 rev. A1 */
++	ATH79_MACH_DHP_1565_A1,		/* D-Link DHP-1565 rev. A1 */
++	ATH79_MACH_DIR_505_A1,		/* D-Link DIR-505 rev. A1 */
++	ATH79_MACH_DIR_600_A1,		/* D-Link DIR-600 rev. A1 */
++	ATH79_MACH_DIR_615_C1,		/* D-Link DIR-615 rev. C1 */
++	ATH79_MACH_DIR_615_E1,		/* D-Link DIR-615 rev. E1 */
++	ATH79_MACH_DIR_615_E4,		/* D-Link DIR-615 rev. E4 */
++	ATH79_MACH_DIR_825_B1,		/* D-Link DIR-825 rev. B1 */
++	ATH79_MACH_DIR_825_C1,		/* D-Link DIR-825 rev. C1 */
++	ATH79_MACH_DIR_835_A1,		/* D-Link DIR-835 rev. A1 */
++	ATH79_MACH_DRAGINO2,		/* Dragino Version 2 */
++	ATH79_MACH_ESR900,		/* EnGenius ESR900 */
++	ATH79_MACH_EW_DORIN,		/* embedded wireless Dorin Platform */
++	ATH79_MACH_EW_DORIN_ROUTER,	/* embedded wireless Dorin Router Platform */
++	ATH79_MACH_EAP300V2,		/* EnGenius EAP300 v2 */
++	ATH79_MACH_EAP7660D,		/* Senao EAP7660D */
++	ATH79_MACH_EL_M150,		/* EasyLink EL-M150 */
++	ATH79_MACH_EL_MINI,		/* EasyLink EL-MINI */
++	ATH79_MACH_ESR1750,		/* EnGenius ESR1750 */
++	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
++	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
++	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */
++	ATH79_MACH_HIWIFI_HC6361,	/* HiWiFi HC6361 */
++	ATH79_MACH_JA76PF,		/* jjPlus JA76PF */
++	ATH79_MACH_JA76PF2,		/* jjPlus JA76PF2 */
++	ATH79_MACH_JWAP003,		/* jjPlus JWAP003 */
++	ATH79_MACH_HORNET_UB,		/* ALFA Networks Hornet-UB */
++	ATH79_MACH_MR600V2,		/* OpenMesh MR600v2 */
++	ATH79_MACH_MR600,		/* OpenMesh MR600 */
++	ATH79_MACH_MR900,		/* OpenMesh MR900 */
++	ATH79_MACH_MR900v2,		/* OpenMesh MR900v2 */
++	ATH79_MACH_MYNET_N600,		/* WD My Net N600 */
++	ATH79_MACH_MYNET_N750,		/* WD My Net N750 */
++	ATH79_MACH_MYNET_REXT,		/* WD My Net Wi-Fi Range Extender */
++	ATH79_MACH_MZK_W04NU,		/* Planex MZK-W04NU */
++	ATH79_MACH_MZK_W300NH,		/* Planex MZK-W300NH */
++	ATH79_MACH_NBG460N,		/* Zyxel NBG460N/550N/550NH */
++	ATH79_MACH_NBG6716,		/* Zyxel NBG6716 */
++	ATH79_MACH_OM2P_HSv2,		/* OpenMesh OM2P-HSv2 */
++	ATH79_MACH_OM2P_HS,		/* OpenMesh OM2P-HS */
++	ATH79_MACH_OM2P_LC,		/* OpenMesh OM2P-LC */
++	ATH79_MACH_OM2Pv2,		/* OpenMesh OM2Pv2 */
++	ATH79_MACH_OM2P,		/* OpenMesh OM2P */
++	ATH79_MACH_OM5P,		/* OpenMesh OM5P */
++	ATH79_MACH_PB42,		/* Atheros PB42 */
++	ATH79_MACH_PB92,		/* Atheros PB92 */
++	ATH79_MACH_QIHOO_C301,		/* Qihoo 360 C301 */
++	ATH79_MACH_R6100,		/* NETGEAR R6100 */
++	ATH79_MACH_RB_411,		/* MikroTik RouterBOARD 411/411A/411AH */
++	ATH79_MACH_RB_411U,		/* MikroTik RouterBOARD 411U */
++	ATH79_MACH_RB_433,		/* MikroTik RouterBOARD 433/433AH */
++	ATH79_MACH_RB_433U,		/* MikroTik RouterBOARD 433UAH */
++	ATH79_MACH_RB_435G,		/* MikroTik RouterBOARD 435G */
++	ATH79_MACH_RB_450G,		/* MikroTik RouterBOARD 450G */
++	ATH79_MACH_RB_450,		/* MikroTik RouterBOARD 450 */
++	ATH79_MACH_RB_493,		/* Mikrotik RouterBOARD 493/493AH */
++	ATH79_MACH_RB_493G,		/* Mikrotik RouterBOARD 493G */
++	ATH79_MACH_RB_711GR100,		/* Mikrotik RouterBOARD 911/912 boards */
++	ATH79_MACH_RB_750,		/* MikroTik RouterBOARD 750 */
++	ATH79_MACH_RB_750G_R3,		/* MikroTik RouterBOARD 750GL */
++	ATH79_MACH_RB_751,		/* MikroTik RouterBOARD 751 */
++	ATH79_MACH_RB_751G,		/* Mikrotik RouterBOARD 751G */
++	ATH79_MACH_RB_951G,		/* Mikrotik RouterBOARD 951G */
++	ATH79_MACH_RB_951U,		/* Mikrotik RouterBOARD 951Ui-2HnD */
++	ATH79_MACH_RB_2011G,		/* Mikrotik RouterBOARD 2011UAS-2HnD */
++	ATH79_MACH_RB_2011L,		/* Mikrotik RouterBOARD 2011L */
++	ATH79_MACH_RB_2011US,		/* Mikrotik RouterBOARD 2011UAS */
++	ATH79_MACH_RB_2011R5,		/* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
++	ATH79_MACH_RB_SXTLITE2ND,	/* Mikrotik RouterBOARD SXT Lite 2nD */
++	ATH79_MACH_RB_SXTLITE5ND,	/* Mikrotik RouterBOARD SXT Lite 5nD */
++	ATH79_MACH_RW2458N,		/* Redwave RW2458N */
++	ATH79_MACH_SMART_300,		/* NC-LINK SMART-300 */
++	ATH79_MACH_TEW_632BRP,		/* TRENDnet TEW-632BRP */
++	ATH79_MACH_TEW_673GRU,		/* TRENDnet TEW-673GRU */
++	ATH79_MACH_TEW_712BR,		/* TRENDnet TEW-712BR */
++	ATH79_MACH_TEW_732BR,		/* TRENDnet TEW-732BR */
++	ATH79_MACH_TL_MR10U,		/* TP-LINK TL-MR10U */
++	ATH79_MACH_TL_MR11U,		/* TP-LINK TL-MR11U */
++	ATH79_MACH_TL_MR13U,		/* TP-LINK TL-MR13U */
++	ATH79_MACH_TL_MR3020,		/* TP-LINK TL-MR3020 */
++	ATH79_MACH_TL_MR3040,		/* TP-LINK TL-MR3040 */
++	ATH79_MACH_TL_MR3040_V2,	/* TP-LINK TL-MR3040 v2 */
++	ATH79_MACH_TL_MR3220,		/* TP-LINK TL-MR3220 */
++	ATH79_MACH_TL_MR3220_V2,	/* TP-LINK TL-MR3220 v2 */
++	ATH79_MACH_TL_MR3420,		/* TP-LINK TL-MR3420 */
++	ATH79_MACH_TL_MR3420_V2,	/* TP-LINK TL-MR3420 v2 */
++	ATH79_MACH_TL_WA701ND_V2,       /* TP-LINK TL-WA701ND v2 */
++	ATH79_MACH_TL_WA750RE,		/* TP-LINK TL-WA750RE */
++	ATH79_MACH_TL_WA7510N_V1,	/* TP-LINK TL-WA7510N v1*/
++	ATH79_MACH_TL_WA850RE,		/* TP-LINK TL-WA850RE */
++	ATH79_MACH_TL_WA860RE,		/* TP-LINK TL-WA860RE */
++	ATH79_MACH_TL_WA801ND_V2,	/* TP-LINK TL-WA801ND v2 */
++	ATH79_MACH_TL_WA830RE_V2,	/* TP-LINK TL-WA830RE v2 */
++	ATH79_MACH_TL_WA901ND,		/* TP-LINK TL-WA901ND */
++	ATH79_MACH_TL_WA901ND_V2,	/* TP-LINK TL-WA901ND v2 */
++	ATH79_MACH_TL_WA901ND_V3,	/* TP-LINK TL-WA901ND v3 */
++	ATH79_MACH_TL_WDR3500,		/* TP-LINK TL-WDR3500 */
++	ATH79_MACH_TL_WDR4300,		/* TP-LINK TL-WDR4300 */
++	ATH79_MACH_TL_WDR4900_V2,	/* TP-LINK TL-WDR4900 v2 */
++	ATH79_MACH_TL_WR1041N_V2,	/* TP-LINK TL-WR1041N v2 */
++	ATH79_MACH_TL_WR1043ND,		/* TP-LINK TL-WR1043ND */
++	ATH79_MACH_TL_WR1043ND_V2,	/* TP-LINK TL-WR1043ND v2 */
++	ATH79_MACH_TL_WR2543N,		/* TP-LINK TL-WR2543N/ND */
++	ATH79_MACH_TL_WR703N,		/* TP-LINK TL-WR703N */
++	ATH79_MACH_TL_WR710N,		/* TP-LINK TL-WR710N */
++	ATH79_MACH_TL_WR720N_V3,	/* TP-LINK TL-WR720N v3 */
++	ATH79_MACH_TL_WR741ND,		/* TP-LINK TL-WR741ND */
++	ATH79_MACH_TL_WR741ND_V4,	/* TP-LINK TL-WR741ND  v4*/
++	ATH79_MACH_TL_WR841N_V1,	/* TP-LINK TL-WR841N v1 */
++	ATH79_MACH_TL_WR841N_V7,	/* TP-LINK TL-WR841N/ND v7 */
++	ATH79_MACH_TL_WR841N_V8,	/* TP-LINK TL-WR841N/ND v8 */
++	ATH79_MACH_TL_WR841N_V9,	/* TP-LINK TL-WR841N/ND v9 */
++	ATH79_MACH_TL_WR842N_V2,	/* TP-LINK TL-WR842N/ND v2 */
++	ATH79_MACH_TL_WR941ND,		/* TP-LINK TL-WR941ND */
++	ATH79_MACH_TL_WR941ND_V5,	/* TP-LINK TL-WR941ND v5 */
++	ATH79_MACH_TUBE2H,		/* Alfa Network Tube2H */
++	ATH79_MACH_UBNT_AIRGW,		/* Ubiquiti AirGateway */
+ 	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
+ 	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
++	ATH79_MACH_UBNT_LOCO_M_XW, 	/* Ubiquiti Loco M XW */
++	ATH79_MACH_UBNT_LSSR71,		/* Ubiquiti LS-SR71 */
++	ATH79_MACH_UBNT_LSX,		/* Ubiquiti LSX */
+ 	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */
++	ATH79_MACH_UBNT_NANO_M_XW, 	/* Ubiquiti NanoStation M XW */
+ 	ATH79_MACH_UBNT_ROCKET_M,	/* Ubiquiti Rocket M */
++	ATH79_MACH_UBNT_RSPRO,		/* Ubiquiti RouterStation Pro */
++	ATH79_MACH_UBNT_RS,		/* Ubiquiti RouterStation */
+ 	ATH79_MACH_UBNT_UAP_PRO,	/* Ubiquiti UniFi AP Pro */
+ 	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
+ 	ATH79_MACH_UBNT_UNIFI_OUTDOOR,	/* Ubiquiti UnifiAP Outdoor */
++	ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
+ 	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
++	ATH79_MACH_WHR_G301N,		/* Buffalo WHR-G301N */
++	ATH79_MACH_WHR_HP_G300N,	/* Buffalo WHR-HP-G300N */
++	ATH79_MACH_WHR_HP_GN,		/* Buffalo WHR-HP-GN */
++	ATH79_MACH_WLAE_AG300N,		/* Buffalo WLAE-AG300N */
++	ATH79_MACH_WLR8100,		/* SITECOM WLR-8100 */
++	ATH79_MACH_WNDAP360,		/* NETGEAR WNDAP360 */
++	ATH79_MACH_WNDR3700,		/* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
++	ATH79_MACH_WNDR3700_V4,		/* NETGEAR WNDR3700v4 */
++	ATH79_MACH_WNDR4300,		/* NETGEAR WNDR4300 */
++	ATH79_MACH_WNR2000,		/* NETGEAR WNR2000 */
++	ATH79_MACH_WNR2000_V3,		/* NETGEAR WNR2000 v3 */
++	ATH79_MACH_WNR2000_V4,		/* NETGEAR WNR2000 v4 */
++	ATH79_MACH_WNR2200,		/* NETGEAR WNR2200 */
++	ATH79_MACH_WNR612_V2,		/* NETGEAR WNR612 v2 */
++	ATH79_MACH_WNR1000_V2,		/* NETGEAR WNR1000 v2 */
++	ATH79_MACH_WP543,		/* Compex WP543 */
++	ATH79_MACH_WPE72,		/* Compex WPE72 */
++	ATH79_MACH_WRT160NL,		/* Linksys WRT160NL */
++	ATH79_MACH_WRT400N,		/* Linksys WRT400N */
++	ATH79_MACH_WZR_HP_AG300H,	/* Buffalo WZR-HP-AG300H */
++	ATH79_MACH_WZR_HP_G300NH,	/* Buffalo WZR-HP-G300NH */
++	ATH79_MACH_WZR_HP_G300NH2,	/* Buffalo WZR-HP-G300NH2 */
++	ATH79_MACH_WZR_HP_G450H,	/* Buffalo WZR-HP-G450H */
++	ATH79_MACH_WZR_450HP2,		/* Buffalo WZR-450HP2 */
++	ATH79_MACH_ZCN_1523H_2,		/* Zcomax ZCN-1523H-2-xx */
++	ATH79_MACH_ZCN_1523H_5,		/* Zcomax ZCN-1523H-5-xx */
+ };
+ 
+ #endif /* _ATH79_MACHTYPE_H */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -2,6 +2,70 @@ if ATH79
+ 
+ menu "Atheros AR71XX/AR724X/AR913X machine selection"
+ 
++config ATH79_MACH_ALFA_AP96
++	bool "ALFA Network AP96 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_HORNET_UB
++	bool "ALFA Network Hornet-UB board support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_ALFA_NX
++	bool "ALFA Network N2/N5 board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_TUBE2H
++	bool "ALFA Network Tube2H board support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_ALL0258N
++	bool "Allnet ALL0258N support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_ALL0315N
++	bool "Allnet ALL0315N support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_AP113
++	bool "Atheros AP113 board support"
++	select SOC_AR724X
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_PB9X_PCI if PCI
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_USB
++	select ATH79_DEV_ETH
++
+ config ATH79_MACH_AP121
+ 	bool "Atheros AP121 reference board"
+ 	select SOC_AR933X
+@@ -11,62 +75,960 @@ config ATH79_MACH_AP121
+ 	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros AP121 reference board.
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros AP121 reference board.
++
++config ATH79_MACH_AP132
++	bool "Atheros AP132 reference board"
++	select SOC_QCA955X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros AP132 reference boards.
++
++config ATH79_MACH_AP136
++	bool "Atheros AP136/AP135 reference board"
++	select SOC_QCA955X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_NFC
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros AP136 or AP135 reference boards.
++
++config ATH79_MACH_AP81
++	bool "Atheros AP81 reference board"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros AP81 reference board.
++
++config ATH79_MACH_AP83
++	bool "Atheros AP83 board support"
++	select SOC_AR913X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_AP96
++	bool "Atheros AP96 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_DB120
++	bool "Atheros DB120 reference board"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros DB120 reference board.
++
++config ATH79_MACH_PB42
++	bool "Atheros PB42 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_PB44
++	bool "Atheros PB44 reference board"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_SPI
++	select ATH79_DEV_USB
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros PB44 reference board.
++
++config ATH79_MACH_PB92
++	bool "Atheros PB92 board support"
++	select SOC_AR724X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_PB9X_PCI if PCI
++	select ATH79_DEV_USB
++
++config ATH79_MACH_AW_NR580
++	bool "AzureWave AW-NR580 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_F9K1115V2
++	bool "Belkin AC1750DB board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_ESR1750
++	bool "EnGenius ESR1750 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WHR_HP_G300N
++	bool "Buffalo WHR-HP-G300N board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_WLAE_AG300N
++	bool "Buffalo WLAE-AG300N board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_WLR8100
++	bool "Sitecom WLR-8100 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WZR_HP_AG300H
++	bool "Buffalo WZR-HP-AG300H board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G300NH
++	bool "Buffalo WZR-HP-G300NH board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select RTL8366_SMI
++
++config ATH79_MACH_WZR_HP_G300NH2
++	bool "Buffalo WZR-HP-G300NH2 board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G450H
++	bool "Buffalo WZR-HP-G450H board support"
++	select SOC_AR724X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_450HP2
++	bool "Buffalo WZR-450HP2 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WP543
++	bool "Compex WP543/WPJ543 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select MYLOADER
++
++config ATH79_MACH_WPE72
++	bool "Compex WPE72/WPE72NX board support"
++	select SOC_AR724X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select MYLOADER
++
++config ATH79_MACH_DGL_5500_A1
++	bool "D-Link DGL-5500 A1 support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_USB
++
++config ATH79_MACH_DHP_1565_A1
++	bool "D-Link DHP-1565 rev. A1 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_DIR_505_A1
++	bool "D-Link DIR-505-A1 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_DIR_600_A1
++	bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_NVRAM
++
++config ATH79_MACH_DIR_615_C1
++	bool "D-Link DIR-615 rev. C1 support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_DIR_825_B1
++	bool "D-Link DIR-825 rev. B1 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_DIR_825_C1
++	bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_DRAGINO2
++	bool "DRAGINO V2 support"
++	select SOC_AR933X
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_ETH
++	select ATH79_DEV_USB
++
++config ATH79_MACH_ESR900
++	bool "EnGenius ESR900 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_EW_DORIN
++	bool "embedded wireless Dorin Platform support"
++	select SOC_AR933X
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_ETH
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Dorin Platform from www.80211.de .
++
++config ATH79_MACH_EL_M150
++	bool "EasyLink EL-M150 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_EL_MINI
++	bool "EasyLink EL-MINI support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_GL_INET
++	bool "GL-INET support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_EAP300V2
++	bool "EnGenius EAP300 v2 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_GS_OOLITE
++       bool "GS Oolite V1 support"
++       select SOC_AR933X
++       select ARH79_DEV_ETH
++       select ARH79_DEV_GPIO_BUTTONS
++       select ATH79_DEV_LEDS_GPIO
++       select ATH79_DEV_M25P80
++       select ATH79_DEV_USB
++       select ATH79_DEV_WMAC
++
++config ATH79_MACH_HIWIFI_HC6361
++	bool "HiWiFi HC6361 board support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_JA76PF
++	bool "jjPlus JA76PF board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_JWAP003
++	bool "jjPlus JWAP003 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WRT160NL
++	bool "Linksys WRT160NL board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_WRT400N
++	bool "Linksys WRT400N board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_R6100
++	bool "NETGEAR R6100 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_RB4XX
++	bool "MikroTik RouterBOARD 4xx series support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_USB
++
++config ATH79_MACH_RB750
++	bool "MikroTik RouterBOARD 750 support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_USB
++	select ATH79_ROUTERBOOT
++	select RLE_DECOMPRESS
++
++config ATH79_MACH_RB91X
++	bool "MikroTik RouterBOARD 91X support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_SPI
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_USB
++	select ATH79_ROUTERBOOT
++	select RLE_DECOMPRESS
++
++config ATH79_MACH_RB95X
++       bool "MikroTik RouterBOARD 95X support"
++       select SOC_AR934X
++       select ATH79_DEV_ETH
++       select ATH79_DEV_NFC
++       select ATH79_DEV_WMAC
++       select ATH79_DEV_USB
++       select ATH79_ROUTERBOOT
++       select RLE_DECOMPRESS
++
++config ATH79_MACH_RB2011
++	bool "MikroTik RouterBOARD 2011 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select ATH79_ROUTERBOOT
++	select RLE_DECOMPRESS
++
++config ATH79_MACH_RBSXTLITE
++	bool "MikroTik RouterBOARD SXT Lite"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_NFC
++	select ATH79_DEV_WMAC
++	select ATH79_ROUTERBOOT
++
++config ATH79_MACH_SMART_300
++	bool "NC-LINK SMART-300 board support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WNDAP360
++	bool "NETGEAR WNDAP360 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_WNDR3700
++	bool "NETGEAR WNDR3700 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WNDR4300
++	bool "NETGEAR WNDR3700v4/WNDR4300 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WNR2000
++	bool "NETGEAR WNR2000 board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WNR2000_V3
++	bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++	config ATH79_MACH_WNR2200
++	bool "NETGEAR WNR2200 board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WNR2000_V4
++	bool "NETGEAR WNR2000 V4"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_OM2P
++	bool "OpenMesh OM2P board support"
++	select SOC_AR724X
++	select SOC_AR933X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_OM5P
++	bool "OpenMesh OM5P board support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MR600
++	bool "OpenMesh MR600 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W04NU
++	bool "Planex MZK-W04NU board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W300NH
++	bool "Planex MZK-W300NH board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_RW2458N
++	bool "Redwave RW2458N board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_CAP4200AG
++	bool "Senao CAP4200AG support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MR900
++	bool "OpenMesh MR900 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_EAP7660D
++	bool "Senao EAP7660D support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_ARCHER_C7
++	bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_CPE510
++	bool "TP-LINK CPE510 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR11U
++	bool "TP-LINK TL-MR11U/TL-MR3040 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR13U
++	bool "TP-LINK TL-MR13U support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3020
++	bool "TP-LINK TL-MR3020 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3X20
++	bool "TP-LINK TL-MR3220/3420 support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_TL_WAX50RE
++	bool "TP-LINK TL-WA750/850RE support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WA701ND_V2
++	bool "TP-LINK TL-WA701ND v2 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
+ 
+-config ATH79_MACH_AP136
+-	bool "Atheros AP136/AP135 reference board"
+-	select SOC_QCA955X
++config ATH79_MACH_TL_WA830RE_V2
++	bool "TP-LINK TL-WA830RE v2 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_NFC
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros AP136 or AP135 reference boards.
+ 
+-config ATH79_MACH_AP81
+-	bool "Atheros AP81 reference board"
++config ATH79_MACH_TL_WA901ND
++	bool "TP-LINK TL-WA901ND/TL-WA7510N support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WA901ND_V2
++	bool "TP-LINK TL-WA901ND v2 support"
+ 	select SOC_AR913X
+ 	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+ 	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WDR3500
++	bool "TP-LINK TL-WDR3500 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros AP81 reference board.
+ 
+-config ATH79_MACH_DB120
+-	bool "Atheros DB120 reference board"
++config ATH79_MACH_TL_WDR4300
++	bool "TP-LINK TL-WDR3600/4300/4310 board support"
+ 	select SOC_AR934X
+ 	select ATH79_DEV_AP9X_PCI if PCI
+ 	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+ 	select ATH79_DEV_M25P80
+-	select ATH79_DEV_NFC
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros DB120 reference board.
+ 
+-config ATH79_MACH_PB44
+-	bool "Atheros PB44 reference board"
++config ATH79_MACH_TL_WR703N
++	bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR720N_V3
++	bool "TP-LINK TL-WR720N v3 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR741ND
++	bool "TP-LINK TL-WR741ND support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR741ND_V4
++	bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR841N_V1
++	bool "TP-LINK TL-WR841N v1 support"
+ 	select SOC_AR71XX
++	select ATH79_DEV_DSA
+ 	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR841N_V8
++	bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR841N_V9
++       bool "TP-LINK TL-WR841N/ND v9 support"
++       select SOC_QCA953X
++       select ATH79_DEV_ETH
++       select ATH79_DEV_GPIO_BUTTONS
++       select ATH79_DEV_LEDS_GPIO
++       select ATH79_DEV_M25P80
++       select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR941ND
++	bool "TP-LINK TL-WR941ND support"
++	select SOC_AR913X
++	select ATH79_DEV_DSA
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1041N_V2
++	bool "TP-LINK TL-WR1041N v2 support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1043ND
++	bool "TP-LINK TL-WR1043ND support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1043ND_V2
++	bool "TP-LINK TL-WR1043ND v2 support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR2543N
++	bool "TP-LINK TL-WR2543N/ND support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_TEW_632BRP
++	bool "TRENDnet TEW-632BRP support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_TEW_673GRU
++	bool "TRENDnet TEW-673GRU support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_NVRAM
++
++config ATH79_MACH_TEW_712BR
++	bool "TRENDnet TEW-712BR support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_TEW_732BR
++	bool "TRENDnet TEW-732BR support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_UBNT
++	bool "Ubiquiti AR71xx based boards support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros PB44 reference board.
+ 
+ config ATH79_MACH_UBNT_XM
+ 	bool "Ubiquiti Networks XM/UniFi boards"
+@@ -83,6 +1045,97 @@ config ATH79_MACH_UBNT_XM
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  Ubiquiti Networks XM (rev 1.0) board.
+ 
++config ATH79_MACH_MYNET_N600
++	bool "WD My Net N600 board support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_MYNET_N750
++	bool "WD My Net N750 board support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_MYNET_REXT
++	bool "WD My Net Wi-Fi Range Extender board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_ZCN_1523H
++	bool "Zcomax ZCN-1523H support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_NBG460N
++	bool "Zyxel NBG460N/550N/550NH board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_NBG6716
++	bool "Zyxel NBG6716 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_CARAMBOLA2
++	bool "8devices Carambola2 board"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_BHU_BXU2000N2_A
++	bool "BHU BXU2000n-2 rev. A support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_QIHOO_C301
++	bool "Qihoo 360 C301 board support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_USB
++	select ATH79_NVRAM
++
+ endmenu
+ 
+ config SOC_AR71XX
+@@ -124,7 +1177,10 @@ config ATH79_DEV_DSA
+ config ATH79_DEV_ETH
+ 	def_bool n
+ 
+-config PCI_AR724X
++config ATH79_DEV_DSA
++	def_bool n
++
++config ATH79_DEV_ETH
+ 	def_bool n
+ 
+ config ATH79_DEV_GPIO_BUTTONS
+@@ -156,4 +1212,7 @@ config ATH79_PCI_ATH9K_FIXUP
+ config ATH79_ROUTERBOOT
+ 	def_bool n
+ 
++config PCI_AR724X
++	def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -38,9 +38,117 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)		+= route
+ #
+ # Machines
+ #
++obj-$(CONFIG_ATH79_MACH_ALFA_AP96)	+= mach-alfa-ap96.o
++obj-$(CONFIG_ATH79_MACH_ALFA_NX)	+= mach-alfa-nx.o
++obj-$(CONFIG_ATH79_MACH_ALL0258N)	+= mach-all0258n.o
++obj-$(CONFIG_ATH79_MACH_ALL0315N)	+= mach-all0315n.o
++obj-$(CONFIG_ATH79_MACH_AP113)		+= mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
++obj-$(CONFIG_ATH79_MACH_AP132)		+= mach-ap132.o
+ obj-$(CONFIG_ATH79_MACH_AP136)		+= mach-ap136.o
+ obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
++obj-$(CONFIG_ATH79_MACH_AP83)		+= mach-ap83.o
++obj-$(CONFIG_ATH79_MACH_AP96)		+= mach-ap96.o
++obj-$(CONFIG_ATH79_MACH_ARCHER_C7)	+= mach-archer-c7.o
++obj-$(CONFIG_ATH79_MACH_AW_NR580)	+= mach-aw-nr580.o
++obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
++obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
+ obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DGL_5500_A1)	+= mach-dgl-5500-a1.o
++obj-$(CONFIG_ATH79_MACH_DHP_1565_A1)	+= mach-dhp-1565-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_505_A1)	+= mach-dir-505-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_600_A1)	+= mach-dir-600-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_C1)	+= mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_B1)	+= mach-dir-825-b1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_C1)	+= mach-dir-825-c1.o
++obj-$(CONFIG_ATH79_MACH_DRAGINO2)	+= mach-dragino2.o
++obj-$(CONFIG_ATH79_MACH_ESR900)	+= mach-esr900.o
++obj-$(CONFIG_ATH79_MACH_EW_DORIN)	+= mach-ew-dorin.o
++obj-$(CONFIG_ATH79_MACH_EAP300V2)	+= mach-eap300v2.o
++obj-$(CONFIG_ATH79_MACH_EAP7660D)	+= mach-eap7660d.o
++obj-$(CONFIG_ATH79_MACH_EL_M150)	+= mach-el-m150.o
++obj-$(CONFIG_ATH79_MACH_EL_MINI)	+= mach-el-mini.o
++obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach-esr1750.o
++obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
++obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
++obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
++obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361)	+= mach-hiwifi-hc6361.o
++obj-$(CONFIG_ATH79_MACH_JA76PF)		+= mach-ja76pf.o
++obj-$(CONFIG_ATH79_MACH_JWAP003)	+= mach-jwap003.o
++obj-$(CONFIG_ATH79_MACH_HORNET_UB)	+= mach-hornet-ub.o
++obj-$(CONFIG_ATH79_MACH_MR600)		+= mach-mr600.o
++obj-$(CONFIG_ATH79_MACH_MR900)		+= mach-mr900.o
++obj-$(CONFIG_ATH79_MACH_MYNET_N600)	+= mach-mynet-n600.o
++obj-$(CONFIG_ATH79_MACH_MYNET_N750)	+= mach-mynet-n750.o
++obj-$(CONFIG_ATH79_MACH_MYNET_REXT)	+= mach-mynet-rext.o
++obj-$(CONFIG_ATH79_MACH_MZK_W04NU)	+= mach-mzk-w04nu.o
++obj-$(CONFIG_ATH79_MACH_MZK_W300NH)	+= mach-mzk-w300nh.o
++obj-$(CONFIG_ATH79_MACH_NBG460N)	+= mach-nbg460n.o
++obj-$(CONFIG_ATH79_MACH_OM2P)		+= mach-om2p.o
++obj-$(CONFIG_ATH79_MACH_OM5P)		+= mach-om5p.o
++obj-$(CONFIG_ATH79_MACH_PB42)		+= mach-pb42.o
+ obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
++obj-$(CONFIG_ATH79_MACH_PB92)		+= mach-pb92.o
++obj-$(CONFIG_ATH79_MACH_QIHOO_C301)	+= mach-qihoo-c301.o
++obj-$(CONFIG_ATH79_MACH_R6100)		+= mach-r6100.o
++obj-$(CONFIG_ATH79_MACH_RB4XX)		+= mach-rb4xx.o
++obj-$(CONFIG_ATH79_MACH_RB750)		+= mach-rb750.o
++obj-$(CONFIG_ATH79_MACH_RB91X)		+= mach-rb91x.o
++obj-$(CONFIG_ATH79_MACH_RB95X)		+= mach-rb95x.o
++obj-$(CONFIG_ATH79_MACH_RB2011)		+= mach-rb2011.o
++obj-$(CONFIG_ATH79_MACH_RBSXTLITE)	+= mach-rbsxtlite.o
++obj-$(CONFIG_ATH79_MACH_RW2458N)	+= mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_SMART_300)	+= mach-smart-300.o
++obj-$(CONFIG_ATH79_MACH_TEW_632BRP)	+= mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TEW_673GRU)	+= mach-tew-673gru.o
++obj-$(CONFIG_ATH79_MACH_TEW_712BR)	+= mach-tew-712br.o
++obj-$(CONFIG_ATH79_MACH_TEW_732BR)	+= mach-tew-732br.o
++obj-$(CONFIG_ATH79_MACH_TL_MR11U)	+= mach-tl-mr11u.o
++obj-$(CONFIG_ATH79_MACH_TL_MR13U)	+= mach-tl-mr13u.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3020)	+= mach-tl-mr3020.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3X20)	+= mach-tl-mr3x20.o
++obj-$(CONFIG_ATH79_MACH_TL_WAX50RE)     += mach-tl-wax50re.o
++obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2)	+= mach-tl-wa701nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2)	+= mach-tl-wa830re-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= mach-tl-wa901nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)	+= mach-tl-wr741nd-v4.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8)	+= mach-tl-wr841n-v8.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9)	+= mach-tl-wr841n-v9.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND)	+= mach-tl-wr941nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2)	+= mach-tl-wr1041n-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND)	+= mach-tl-wr1043nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2)	+= mach-tl-wr1043nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WR2543N)	+= mach-tl-wr2543n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR703N)	+= mach-tl-wr703n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3)	+= mach-tl-wr720n-v3.o
++obj-$(CONFIG_ATH79_MACH_TUBE2H)		+= mach-tube2h.o
++obj-$(CONFIG_ATH79_MACH_UBNT)		+= mach-ubnt.o
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM)	+= mach-ubnt-xm.o
++obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N)	+= mach-whr-hp-g300n.o
++obj-$(CONFIG_ATH79_MACH_WLAE_AG300N)	+= mach-wlae-ag300n.o
++obj-$(CONFIG_ATH79_MACH_WLR8100)	+= mach-wlr8100.o
++obj-$(CONFIG_ATH79_MACH_WNDAP360)	+= mach-wndap360.o
++obj-$(CONFIG_ATH79_MACH_WNDR3700)	+= mach-wndr3700.o
++obj-$(CONFIG_ATH79_MACH_WNDR4300)	+= mach-wndr4300.o
++obj-$(CONFIG_ATH79_MACH_WNR2000)	+= mach-wnr2000.o
++obj-$(CONFIG_ATH79_MACH_WNR2000_V3)	+= mach-wnr2000-v3.o
++obj-$(CONFIG_ATH79_MACH_WNR2000_V4)	+= mach-wnr2000-v4.o
++obj-$(CONFIG_ATH79_MACH_WNR2200)	+= mach-wnr2200.o
++obj-$(CONFIG_ATH79_MACH_WP543)		+= mach-wp543.o
++obj-$(CONFIG_ATH79_MACH_WPE72)		+= mach-wpe72.o
++obj-$(CONFIG_ATH79_MACH_WRT160NL)	+= mach-wrt160nl.o
++obj-$(CONFIG_ATH79_MACH_WRT400N)	+= mach-wrt400n.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH)	+= mach-wzr-hp-g300nh.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2)	+= mach-wzr-hp-g300nh2.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H)	+= mach-wzr-hp-ag300h.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H)	+= mach-wzr-hp-g450h.o
++obj-$(CONFIG_ATH79_MACH_WZR_450HP2)	+= mach-wzr-450hp2.o
++obj-$(CONFIG_ATH79_MACH_ZCN_1523H)	+= mach-zcn-1523h.o
++obj-$(CONFIG_ATH79_MACH_CARAMBOLA2)	+= mach-carambola2.o
++obj-$(CONFIG_ATH79_MACH_NBG6716)	+= mach-nbg6716.o
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -180,6 +180,12 @@ void __init prom_init(void)
+ 			ath79_prom_append_cmdline("board", env);
+ 		}
+ 	}
++
++	if (strstr(arcs_cmdline, "board=750Gr3") ||
++	    strstr(arcs_cmdline, "board=951G") ||
++	    strstr(arcs_cmdline, "board=2011L") ||
++	    strstr(arcs_cmdline, "board=711Gr100"))
++		ath79_prom_append_cmdline("console", "ttyS0,115200");
+ }
+ 
+ void __init prom_free_prom_memory(void)
diff --git a/target/linux/ar71xx/patches-3.18/611-MIPS-ath79-wdt-timeout.patch b/target/linux/ar71xx/patches-3.18/611-MIPS-ath79-wdt-timeout.patch
new file mode 100644
index 0000000000..7a70ac3f87
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/611-MIPS-ath79-wdt-timeout.patch
@@ -0,0 +1,25 @@
+MIPS: ath79: fix maximum timeout
+
+If the userland tries to set a timeout higher than the max_timeout, then we should fallback to max_timeout.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+
+--- a/drivers/watchdog/ath79_wdt.c
++++ b/drivers/watchdog/ath79_wdt.c
+@@ -114,10 +114,14 @@ static inline void ath79_wdt_disable(voi
+ 
+ static int ath79_wdt_set_timeout(int val)
+ {
+-	if (val < 1 || val > max_timeout)
++	if (val < 1)
+ 		return -EINVAL;
+ 
+-	timeout = val;
++	if (val > max_timeout)
++		timeout = max_timeout;
++	else
++		timeout = val;
++
+ 	ath79_wdt_keepalive();
+ 
+ 	return 0;
diff --git a/target/linux/ar71xx/patches-3.18/612-MIPS-ath79-set-buffalo-txgain.patch b/target/linux/ar71xx/patches-3.18/612-MIPS-ath79-set-buffalo-txgain.patch
new file mode 100644
index 0000000000..fdef854fce
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/612-MIPS-ath79-set-buffalo-txgain.patch
@@ -0,0 +1,24 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -306,6 +306,11 @@ void __init ath79_wmac_disable_5ghz(void
+ 	ath79_wmac_data.disable_5ghz = true;
+ }
+ 
++void __init ath79_wmac_set_tx_gain_buffalo(void)
++{
++	ath79_wmac_data.tx_gain_buffalo = true;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ 	if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -16,6 +16,7 @@ void ath79_register_wmac(u8 *cal_data, u
+ void ath79_register_wmac_simple(void);
+ void ath79_wmac_disable_2ghz(void);
+ void ath79_wmac_disable_5ghz(void);
++void ath79_wmac_set_tx_gain_buffalo(void);
+ 
+ bool ar93xx_wmac_read_mac_address(u8 *dest);
+ 
diff --git a/target/linux/ar71xx/patches-3.18/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch b/target/linux/ar71xx/patches-3.18/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch
new file mode 100644
index 0000000000..83de7b120a
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch
@@ -0,0 +1,76 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -18,9 +18,11 @@
+ #include <linux/etherdevice.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/gpio.h>
+ 
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
++#include "common.h"
+ #include "dev-wmac.h"
+ 
+ static u8 ath79_wmac_mac[ETH_ALEN];
+@@ -311,6 +313,51 @@ void __init ath79_wmac_set_tx_gain_buffa
+ 	ath79_wmac_data.tx_gain_buffalo = true;
+ }
+ 
++static int ath79_request_ext_lna_gpio(unsigned chain, int gpio)
++{
++	char buf[32];
++	char *label;
++	int err;
++
++	scnprintf(buf, sizeof(buf), "external LNA%u", chain);
++	label = kstrdup(buf, GFP_KERNEL);
++
++	err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label);
++	if (err) {
++		pr_err("unable to request GPIO%d for external LNA%u\n",
++			gpio, chain);
++		kfree(label);
++	}
++
++	return err;
++}
++
++static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio)
++{
++	unsigned int sel;
++	int err;
++
++	if (WARN_ON(chain > 1))
++		return;
++
++	err = ath79_request_ext_lna_gpio(chain, gpio);
++	if (err)
++		return;
++
++	if (chain == 0)
++		sel = AR934X_GPIO_OUT_EXT_LNA0;
++	else
++		sel = AR934X_GPIO_OUT_EXT_LNA1;
++
++	ath79_gpio_output_select(gpio, sel);
++}
++
++void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio)
++{
++	if (soc_is_ar934x())
++		ar934x_set_ext_lna_gpio(chain, gpio);
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ 	if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -17,6 +17,7 @@ void ath79_register_wmac_simple(void);
+ void ath79_wmac_disable_2ghz(void);
+ void ath79_wmac_disable_5ghz(void);
+ void ath79_wmac_set_tx_gain_buffalo(void);
++void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio);
+ 
+ bool ar93xx_wmac_read_mac_address(u8 *dest);
+ 
diff --git a/target/linux/ar71xx/patches-3.18/614-MIPS-ath79-ap81-remove-mtd-partitions.patch b/target/linux/ar71xx/patches-3.18/614-MIPS-ath79-ap81-remove-mtd-partitions.patch
new file mode 100644
index 0000000000..6d403abd29
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/614-MIPS-ath79-ap81-remove-mtd-partitions.patch
@@ -0,0 +1,49 @@
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -33,37 +33,6 @@
+ 
+ #define AP81_CAL_DATA_ADDR	0x1fff1000
+ 
+-static struct mtd_partition ap81_partitions[] = {
+-	{
+-		.name		= "u-boot",
+-		.offset		= 0,
+-		.size		= 0x040000,
+-		.mask_flags	= MTD_WRITEABLE,
+-	}, {
+-		.name		= "u-boot-env",
+-		.offset		= 0x040000,
+-		.size		= 0x010000,
+-	}, {
+-		.name		= "rootfs",
+-		.offset		= 0x050000,
+-		.size		= 0x500000,
+-	}, {
+-		.name		= "uImage",
+-		.offset		= 0x550000,
+-		.size		= 0x100000,
+-	}, {
+-		.name		= "ART",
+-		.offset		= 0x650000,
+-		.size		= 0x1b0000,
+-		.mask_flags	= MTD_WRITEABLE,
+-	}
+-};
+-
+-static struct flash_platform_data ap81_flash_data = {
+-	.parts		= ap81_partitions,
+-	.nr_parts	= ARRAY_SIZE(ap81_partitions),
+-};
+-
+ static struct gpio_led ap81_leds_gpio[] __initdata = {
+ 	{
+ 		.name		= "ap81:green:status",
+@@ -111,7 +80,7 @@ static void __init ap81_setup(void)
+ 	ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+ 					ARRAY_SIZE(ap81_gpio_keys),
+ 					ap81_gpio_keys);
+-	ath79_register_m25p80(&ap81_flash_data);
++	ath79_register_m25p80(NULL);
+ 	ath79_register_wmac(cal_data, NULL);
+ 	ath79_register_usb();
+ 
diff --git a/target/linux/ar71xx/patches-3.18/615-MIPS-ath79-ap83-remove-mtd-partitions.patch b/target/linux/ar71xx/patches-3.18/615-MIPS-ath79-ap83-remove-mtd-partitions.patch
new file mode 100644
index 0000000000..60872ae0a6
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/615-MIPS-ath79-ap83-remove-mtd-partitions.patch
@@ -0,0 +1,44 @@
+--- a/arch/mips/ath79/mach-ap83.c
++++ b/arch/mips/ath79/mach-ap83.c
+@@ -42,41 +42,8 @@
+ #define AP83_KEYS_POLL_INTERVAL		20	/* msecs */
+ #define AP83_KEYS_DEBOUNCE_INTERVAL	(3 * AP83_KEYS_POLL_INTERVAL)
+ 
+-static struct mtd_partition ap83_flash_partitions[] = {
+-	{
+-		.name		= "u-boot",
+-		.offset		= 0,
+-		.size		= 0x040000,
+-		.mask_flags	= MTD_WRITEABLE,
+-	}, {
+-		.name		= "u-boot-env",
+-		.offset		= 0x040000,
+-		.size		= 0x020000,
+-		.mask_flags	= MTD_WRITEABLE,
+-	}, {
+-		.name		= "kernel",
+-		.offset		= 0x060000,
+-		.size		= 0x140000,
+-	}, {
+-		.name		= "rootfs",
+-		.offset		= 0x1a0000,
+-		.size		= 0x650000,
+-	}, {
+-		.name		= "art",
+-		.offset		= 0x7f0000,
+-		.size		= 0x010000,
+-		.mask_flags	= MTD_WRITEABLE,
+-	}, {
+-		.name		= "firmware",
+-		.offset		= 0x060000,
+-		.size		= 0x790000,
+-	}
+-};
+-
+ static struct physmap_flash_data ap83_flash_data = {
+ 	.width		= 2,
+-	.parts		= ap83_flash_partitions,
+-	.nr_parts	= ARRAY_SIZE(ap83_flash_partitions),
+ };
+ 
+ static struct resource ap83_flash_resources[] = {
diff --git a/target/linux/ar71xx/patches-3.18/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-3.18/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch
new file mode 100644
index 0000000000..11d91c2fda
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch
@@ -0,0 +1,435 @@
+From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001
+Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net>
+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Sat, 29 Mar 2014 20:26:08 +0100
+Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC
+
+Note that the clock calculation looks very similar to the QCA955x, but the
+meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
+---
+ arch/mips/ath79/Kconfig                        |  6 +-
+ arch/mips/ath79/clock.c                        | 78 ++++++++++++++++++++++++++
+ arch/mips/ath79/common.c                       |  4 ++
+ arch/mips/ath79/dev-common.c                   |  1 +
+ arch/mips/ath79/dev-wmac.c                     | 20 +++++++
+ arch/mips/ath79/early_printk.c                 |  1 +
+ arch/mips/ath79/gpio.c                         |  4 +-
+ arch/mips/ath79/irq.c                          |  4 ++
+ arch/mips/ath79/setup.c                        |  8 ++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ath79.h       | 11 ++++
+ 11 files changed, 182 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -1158,6 +1158,10 @@ config SOC_AR934X
+ 	select PCI_AR724X if PCI
+ 	def_bool n
+ 
++config SOC_QCA953X
++	select USB_ARCH_HAS_EHCI
++	def_bool n
++
+ config SOC_QCA955X
+ 	select HW_HAS_PCI
+ 	select PCI_AR724X if PCI
+@@ -1200,7 +1204,7 @@ config ATH79_DEV_USB
+ 	def_bool n
+ 
+ config ATH79_DEV_WMAC
+-	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
++	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
+ 	def_bool n
+ 
+ config ATH79_NVRAM
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -350,6 +350,91 @@ static void __init ar934x_clocks_init(vo
+ 	iounmap(dpll_base);
+ }
+ 
++static void __init qca953x_clocks_init(void)
++{
++	unsigned long ref_rate;
++	unsigned long cpu_rate;
++	unsigned long ddr_rate;
++	unsigned long ahb_rate;
++	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
++	u32 cpu_pll, ddr_pll;
++	u32 bootstrap;
++
++	bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++	if (bootstrap &	QCA953X_BOOTSTRAP_REF_CLK_40)
++		ref_rate = 40 * 1000 * 1000;
++	else
++		ref_rate = 25 * 1000 * 1000;
++
++	pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
++	out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++		  QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
++	ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++		  QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
++	nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
++	       QCA953X_PLL_CPU_CONFIG_NINT_MASK;
++	frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
++	       QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
++
++	cpu_pll = nint * ref_rate / ref_div;
++	cpu_pll += frac * (ref_rate >> 6) / ref_div;
++	cpu_pll /= (1 << out_div);
++
++	pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
++	out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++		  QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
++	ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++		  QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
++	nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
++	       QCA953X_PLL_DDR_CONFIG_NINT_MASK;
++	frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
++	       QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
++
++	ddr_pll = nint * ref_rate / ref_div;
++	ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
++	ddr_pll /= (1 << out_div);
++
++	clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
++
++	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++		  QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
++		cpu_rate = ref_rate;
++	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
++		cpu_rate = cpu_pll / (postdiv + 1);
++	else
++		cpu_rate = ddr_pll / (postdiv + 1);
++
++	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++		  QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
++		ddr_rate = ref_rate;
++	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
++		ddr_rate = ddr_pll / (postdiv + 1);
++	else
++		ddr_rate = cpu_pll / (postdiv + 1);
++
++	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++		  QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
++		ahb_rate = ref_rate;
++	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++		ahb_rate = ddr_pll / (postdiv + 1);
++	else
++		ahb_rate = cpu_pll / (postdiv + 1);
++
++	ath79_add_sys_clkdev("ref", ref_rate);
++	ath79_add_sys_clkdev("cpu", cpu_rate);
++	ath79_add_sys_clkdev("ddr", ddr_rate);
++	ath79_add_sys_clkdev("ahb", ahb_rate);
++
++	clk_add_alias("wdt", NULL, "ref", NULL);
++	clk_add_alias("uart", NULL, "ref", NULL);
++}
++
+ static void __init qca955x_clocks_init(void)
+ {
+ 	unsigned long ref_rate;
+@@ -447,6 +532,8 @@ void __init ath79_clocks_init(void)
+ 		ar933x_clocks_init();
+ 	else if (soc_is_ar934x())
+ 		ar934x_clocks_init();
++	else if (soc_is_qca953x())
++		qca953x_clocks_init();
+ 	else if (soc_is_qca955x())
+ 		qca955x_clocks_init();
+ 	else
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -73,6 +73,8 @@ void ath79_device_reset_set(u32 mask)
+ 		reg = AR933X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_ar934x())
+ 		reg = AR934X_RESET_REG_RESET_MODULE;
++	else if (soc_is_qca953x())
++		reg = QCA953X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
+ 	else
+@@ -101,6 +103,8 @@ void ath79_device_reset_clear(u32 mask)
+ 		reg = AR933X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_ar934x())
+ 		reg = AR934X_RESET_REG_RESET_MODULE;
++	else if (soc_is_qca953x())
++		reg = QCA953X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
+ 	else
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -93,6 +93,7 @@ void __init ath79_register_uart(void)
+ 	    soc_is_ar724x() ||
+ 	    soc_is_ar913x() ||
+ 	    soc_is_ar934x() ||
++	    soc_is_qca953x() ||
+ 	    soc_is_qca955x()) {
+ 		ath79_uart_data[0].uartclk = uart_clk_rate;
+ 		platform_device_register(&ath79_uart_device);
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -101,7 +101,7 @@ static int ar933x_wmac_reset(void)
+ 	return -ETIMEDOUT;
+ }
+ 
+-static int ar933x_r1_get_wmac_revision(void)
++static int ar93xx_get_soc_revision(void)
+ {
+ 	return ath79_soc_rev;
+ }
+@@ -126,7 +126,7 @@ static void __init ar933x_wmac_setup(voi
+ 		ath79_wmac_data.is_clk_25mhz = true;
+ 
+ 	if (ath79_soc_rev == 1)
+-		ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
++		ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+ 
+ 	ath79_wmac_data.external_reset = ar933x_wmac_reset;
+ }
+@@ -149,6 +149,26 @@ static void ar934x_wmac_setup(void)
+ 		ath79_wmac_data.is_clk_25mhz = true;
+ }
+ 
++static void qca953x_wmac_setup(void)
++{
++	u32 t;
++
++	ath79_wmac_device.name = "qca953x_wmac";
++
++	ath79_wmac_resources[0].start = QCA953X_WMAC_BASE;
++	ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1;
++	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
++	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
++
++	t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++	if (t & QCA953X_BOOTSTRAP_REF_CLK_40)
++		ath79_wmac_data.is_clk_25mhz = false;
++	else
++		ath79_wmac_data.is_clk_25mhz = true;
++
++	ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
++}
++
+ static void qca955x_wmac_setup(void)
+ {
+ 	u32 t;
+@@ -366,6 +386,8 @@ void __init ath79_register_wmac(u8 *cal_
+ 		ar933x_wmac_setup();
+ 	else if (soc_is_ar934x())
+ 		ar934x_wmac_setup();
++	else if (soc_is_qca953x())
++		qca953x_wmac_setup();
+ 	else if (soc_is_qca955x())
+ 		qca955x_wmac_setup();
+ 	else
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -114,6 +114,7 @@ static void prom_putchar_init(void)
+ 	case REV_ID_MAJOR_AR9341:
+ 	case REV_ID_MAJOR_AR9342:
+ 	case REV_ID_MAJOR_AR9344:
++	case REV_ID_MAJOR_QCA9533:
+ 	case REV_ID_MAJOR_QCA9556:
+ 	case REV_ID_MAJOR_QCA9558:
+ 		_prom_putchar = prom_putchar_ar71xx;
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -224,6 +224,8 @@ void __init ath79_gpio_init(void)
+ 		ath79_gpio_count = AR933X_GPIO_COUNT;
+ 	else if (soc_is_ar934x())
+ 		ath79_gpio_count = AR934X_GPIO_COUNT;
++	else if (soc_is_qca953x())
++		ath79_gpio_count = QCA953X_GPIO_COUNT;
+ 	else if (soc_is_qca955x())
+ 		ath79_gpio_count = QCA955X_GPIO_COUNT;
+ 	else
+@@ -231,7 +233,7 @@ void __init ath79_gpio_init(void)
+ 
+ 	ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ 	ath79_gpio_chip.ngpio = ath79_gpio_count;
+-	if (soc_is_ar934x() || soc_is_qca955x()) {
++	if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x()) {
+ 		ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
+ 		ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
+ 	}
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -106,6 +106,7 @@ static void __init ath79_misc_irq_init(v
+ 	else if (soc_is_ar724x() ||
+ 		 soc_is_ar933x() ||
+ 		 soc_is_ar934x() ||
++		 soc_is_qca953x() ||
+ 		 soc_is_qca955x())
+ 		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+ 	else
+@@ -352,6 +353,9 @@ void __init arch_init_irq(void)
+ 	} else if (soc_is_ar934x()) {
+ 		ath79_ip2_handler = ath79_default_ip2_handler;
+ 		ath79_ip3_handler = ar934x_ip3_handler;
++	} else if (soc_is_qca953x()) {
++		ath79_ip2_handler = ath79_default_ip2_handler;
++		ath79_ip3_handler = ath79_default_ip3_handler;
+ 	} else if (soc_is_qca955x()) {
+ 		ath79_ip2_handler = ath79_default_ip2_handler;
+ 		ath79_ip3_handler = ath79_default_ip3_handler;
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -151,6 +151,12 @@ static void __init ath79_detect_sys_type
+ 		rev = id & AR934X_REV_ID_REVISION_MASK;
+ 		break;
+ 
++	case REV_ID_MAJOR_QCA9533:
++		ath79_soc = ATH79_SOC_QCA9533;
++		chip = "9533";
++		rev = id & QCA953X_REV_ID_REVISION_MASK;
++		break;
++
+ 	case REV_ID_MAJOR_QCA9556:
+ 		ath79_soc = ATH79_SOC_QCA9556;
+ 		chip = "9556";
+@@ -169,7 +175,7 @@ static void __init ath79_detect_sys_type
+ 
+ 	ath79_soc_rev = rev;
+ 
+-	if (soc_is_qca955x())
++	if (soc_is_qca953x() || soc_is_qca955x())
+ 		sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
+ 			chip, rev);
+ 	else
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -105,6 +105,9 @@
+ #define AR934X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
+ #define AR934X_SRIF_SIZE	0x1000
+ 
++#define QCA953X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
++#define QCA953X_WMAC_SIZE	0x20000
++
+ #define QCA955X_PCI_MEM_BASE0	0x10000000
+ #define QCA955X_PCI_MEM_BASE1	0x12000000
+ #define QCA955X_PCI_MEM_SIZE	0x02000000
+@@ -279,6 +282,43 @@
+ 
+ #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL	BIT(6)
+ 
++#define QCA953X_PLL_CPU_CONFIG_REG		0x00
++#define QCA953X_PLL_DDR_CONFIG_REG		0x04
++#define QCA953X_PLL_CLK_CTRL_REG		0x08
++#define QCA953X_PLL_ETH_XMII_CONTROL_REG	0x2c
++#define QCA953X_PLL_ETH_SGMII_CONTROL_REG	0x48
++
++#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
++#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
++#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT	6
++#define QCA953X_PLL_CPU_CONFIG_NINT_MASK	0x3f
++#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT	12
++#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK	0x1f
++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT	19
++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK	0x3
++
++#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT	0
++#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK	0x3ff
++#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT	10
++#define QCA953X_PLL_DDR_CONFIG_NINT_MASK	0x3f
++#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT	16
++#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK	0x1f
++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT	23
++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK	0x7
++
++#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
++#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
++#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS		BIT(4)
++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT		5
++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK		0x1f
++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT		10
++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK		0x1f
++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT		15
++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK		0x1f
++#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL		BIT(20)
++#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
++#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
++
+ #define QCA955X_PLL_CPU_CONFIG_REG		0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG		0x04
+ #define QCA955X_PLL_CLK_CTRL_REG		0x08
+@@ -355,6 +395,10 @@
+ #define AR934X_RESET_REG_BOOTSTRAP		0xb0
+ #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
+ 
++#define QCA953X_RESET_REG_RESET_MODULE		0x1c
++#define QCA953X_RESET_REG_BOOTSTRAP		0xb0
++#define QCA953X_RESET_REG_EXT_INT_STATUS	0xac
++
+ #define QCA955X_RESET_REG_RESET_MODULE		0x1c
+ #define QCA955X_RESET_REG_BOOTSTRAP		0xb0
+ #define QCA955X_RESET_REG_EXT_INT_STATUS	0xac
+@@ -503,6 +547,8 @@
+ #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
+ #define AR934X_BOOTSTRAP_DDR1		BIT(0)
+ 
++#define QCA953X_BOOTSTRAP_REF_CLK_40	BIT(4)
++
+ #define QCA955X_BOOTSTRAP_REF_CLK_40	BIT(4)
+ 
+ #define AR934X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
+@@ -565,6 +611,7 @@
+ #define REV_ID_MAJOR_AR9341		0x0120
+ #define REV_ID_MAJOR_AR9342		0x1120
+ #define REV_ID_MAJOR_AR9344		0x2120
++#define REV_ID_MAJOR_QCA9533		0x0140
+ #define REV_ID_MAJOR_QCA9556		0x0130
+ #define REV_ID_MAJOR_QCA9558		0x1130
+ 
+@@ -587,6 +634,8 @@
+ 
+ #define AR934X_REV_ID_REVISION_MASK	0xf
+ 
++#define QCA953X_REV_ID_REVISION_MASK	0xf
++
+ #define QCA955X_REV_ID_REVISION_MASK	0xf
+ 
+ /*
+@@ -640,6 +689,7 @@
+ #define AR913X_GPIO_COUNT		22
+ #define AR933X_GPIO_COUNT		30
+ #define AR934X_GPIO_COUNT		23
++#define QCA953X_GPIO_COUNT		24
+ #define QCA955X_GPIO_COUNT		24
+ 
+ /*
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -32,6 +32,7 @@ enum ath79_soc_type {
+ 	ATH79_SOC_AR9341,
+ 	ATH79_SOC_AR9342,
+ 	ATH79_SOC_AR9344,
++	ATH79_SOC_QCA9533,
+ 	ATH79_SOC_QCA9556,
+ 	ATH79_SOC_QCA9558,
+ };
+@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void)
+ 	return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
+ }
+ 
++static inline int soc_is_qca9533(void)
++{
++	return ath79_soc == ATH79_SOC_QCA9533;
++}
++
++static inline int soc_is_qca953x(void)
++{
++	return soc_is_qca9533();
++}
++
+ static inline int soc_is_qca9556(void)
+ {
+ 	return ath79_soc == ATH79_SOC_QCA9556;
diff --git a/target/linux/ar71xx/patches-3.18/727-MIPS-ath79-ar934x-wmac-revision.patch b/target/linux/ar71xx/patches-3.18/727-MIPS-ath79-ar934x-wmac-revision.patch
new file mode 100644
index 0000000000..b1b4946e03
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/727-MIPS-ath79-ar934x-wmac-revision.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -147,6 +147,8 @@ static void ar934x_wmac_setup(void)
+ 		ath79_wmac_data.is_clk_25mhz = false;
+ 	else
+ 		ath79_wmac_data.is_clk_25mhz = true;
++
++	ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+ }
+ 
+ static void qca953x_wmac_setup(void)
diff --git a/target/linux/ar71xx/patches-3.18/728-MIPS-ath79-fix-restart.patch b/target/linux/ar71xx/patches-3.18/728-MIPS-ath79-fix-restart.patch
new file mode 100644
index 0000000000..612078c796
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/728-MIPS-ath79-fix-restart.patch
@@ -0,0 +1,20 @@
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYP
+ 
+ static void ath79_restart(char *command)
+ {
++	local_irq_disable();
+ 	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
+ 	for (;;)
+ 		if (cpu_wait)
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -144,6 +144,7 @@ static inline u32 ath79_pll_rr(unsigned
+ static inline void ath79_reset_wr(unsigned reg, u32 val)
+ {
+ 	__raw_writel(val, ath79_reset_base + reg);
++	(void) __raw_readl(ath79_reset_base + reg); /* flush */
+ }
+ 
+ static inline u32 ath79_reset_rr(unsigned reg)
diff --git a/target/linux/ar71xx/patches-3.18/735-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-3.18/735-MIPS-ath79-add-support-for-QCA956x-SoC.patch
new file mode 100644
index 0000000000..3216266028
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/735-MIPS-ath79-add-support-for-QCA956x-SoC.patch
@@ -0,0 +1,767 @@
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -520,6 +520,100 @@ static void __init qca955x_clocks_init(v
+ 	clk_add_alias("uart", NULL, "ref", NULL);
+ }
+ 
++static void __init qca956x_clocks_init(void)
++{
++	unsigned long ref_rate;
++	unsigned long cpu_rate;
++	unsigned long ddr_rate;
++	unsigned long ahb_rate;
++	u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv;
++	u32 cpu_pll, ddr_pll;
++	u32 bootstrap;
++
++	bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
++	if (bootstrap &	QCA956X_BOOTSTRAP_REF_CLK_40)
++		ref_rate = 40 * 1000 * 1000;
++	else
++		ref_rate = 25 * 1000 * 1000;
++
++	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
++	out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++		  QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
++	ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++		  QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
++
++	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
++	nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
++	       QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
++	hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
++	       QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK;
++	lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) &
++	       QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK;
++
++	cpu_pll = nint * ref_rate / ref_div;
++	cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
++	cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
++	cpu_pll /= (1 << out_div);
++
++	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
++	out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++		  QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
++	ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++		  QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
++	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
++	nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
++	       QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
++	hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
++	       QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK;
++	lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) &
++	       QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK;
++
++	ddr_pll = nint * ref_rate / ref_div;
++	ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
++	ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
++	ddr_pll /= (1 << out_div);
++
++	clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
++
++	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++		  QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
++		cpu_rate = ref_rate;
++	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL)
++		cpu_rate = ddr_pll / (postdiv + 1);
++	else
++		cpu_rate = cpu_pll / (postdiv + 1);
++
++	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++		  QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
++		ddr_rate = ref_rate;
++	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL)
++		ddr_rate = cpu_pll / (postdiv + 1);
++	else
++		ddr_rate = ddr_pll / (postdiv + 1);
++
++	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++		  QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
++		ahb_rate = ref_rate;
++	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++		ahb_rate = ddr_pll / (postdiv + 1);
++	else
++		ahb_rate = cpu_pll / (postdiv + 1);
++
++	ath79_add_sys_clkdev("ref", ref_rate);
++	ath79_add_sys_clkdev("cpu", cpu_rate);
++	ath79_add_sys_clkdev("ddr", ddr_rate);
++	ath79_add_sys_clkdev("ahb", ahb_rate);
++
++	clk_add_alias("wdt", NULL, "ref", NULL);
++	clk_add_alias("uart", NULL, "ref", NULL);
++}
++
+ void __init ath79_clocks_init(void)
+ {
+ 	if (soc_is_ar71xx())
+@@ -536,6 +630,8 @@ void __init ath79_clocks_init(void)
+ 		qca953x_clocks_init();
+ 	else if (soc_is_qca955x())
+ 		qca955x_clocks_init();
++	else if (soc_is_qca956x())
++		qca956x_clocks_init();
+ 	else
+ 		BUG();
+ }
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -77,6 +77,8 @@ void ath79_device_reset_set(u32 mask)
+ 		reg = QCA953X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
++	else if (soc_is_qca956x())
++		reg = QCA956X_RESET_REG_RESET_MODULE;
+ 	else
+ 		panic("Reset register not defined for this SOC");
+ 
+@@ -107,6 +109,8 @@ void ath79_device_reset_clear(u32 mask)
+ 		reg = QCA953X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
++	else if (soc_is_qca956x())
++		reg = QCA956X_RESET_REG_RESET_MODULE;
+ 	else
+ 		panic("Reset register not defined for this SOC");
+ 
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -94,7 +94,8 @@ void __init ath79_register_uart(void)
+ 	    soc_is_ar913x() ||
+ 	    soc_is_ar934x() ||
+ 	    soc_is_qca953x() ||
+-	    soc_is_qca955x()) {
++	    soc_is_qca955x() ||
++	    soc_is_qca956x()) {
+ 		ath79_uart_data[0].uartclk = uart_clk_rate;
+ 		platform_device_register(&ath79_uart_device);
+ 	} else if (soc_is_ar933x()) {
+--- a/arch/mips/ath79/dev-eth.c
++++ b/arch/mips/ath79/dev-eth.c
+@@ -198,6 +198,8 @@ void __init ath79_register_mdio(unsigned
+ 	case ATH79_SOC_AR9330:
+ 	case ATH79_SOC_AR9331:
+ 	case ATH79_SOC_QCA9533:
++	case ATH79_SOC_QCA9561:
++	case ATH79_SOC_TP9343:
+ 		mdio_dev = &ath79_mdio1_device;
+ 		mdio_data = &ath79_mdio1_data;
+ 		break;
+@@ -256,6 +258,8 @@ void __init ath79_register_mdio(unsigned
+ 		break;
+ 
+ 	case ATH79_SOC_QCA9533:
++	case ATH79_SOC_QCA9561:
++	case ATH79_SOC_TP9343:
+ 		mdio_data->builtin_switch = 1;
+ 		break;
+ 
+@@ -571,6 +575,8 @@ static void __init ath79_init_eth_pll_da
+ 	case ATH79_SOC_QCA9533:
+ 	case ATH79_SOC_QCA9556:
+ 	case ATH79_SOC_QCA9558:
++	case ATH79_SOC_QCA9561:
++	case ATH79_SOC_TP9343:
+ 		pll_10 = AR934X_PLL_VAL_10;
+ 		pll_100 = AR934X_PLL_VAL_100;
+ 		pll_1000 = AR934X_PLL_VAL_1000;
+@@ -627,6 +633,8 @@ static int __init ath79_setup_phy_if_mod
+ 		case ATH79_SOC_AR9330:
+ 		case ATH79_SOC_AR9331:
+ 		case ATH79_SOC_QCA9533:
++		case ATH79_SOC_QCA9561:
++		case ATH79_SOC_TP9343:
+ 			pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
+ 			break;
+ 
+@@ -688,6 +696,8 @@ static int __init ath79_setup_phy_if_mod
+ 		case ATH79_SOC_AR9330:
+ 		case ATH79_SOC_AR9331:
+ 		case ATH79_SOC_QCA9533:
++		case ATH79_SOC_QCA9561:
++		case ATH79_SOC_TP9343:
+ 			pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ 			break;
+ 
+@@ -992,6 +1002,8 @@ void __init ath79_register_eth(unsigned
+ 		break;
+ 
+ 	case ATH79_SOC_QCA9533:
++	case ATH79_SOC_QCA9561:
++	case ATH79_SOC_TP9343:
+ 		if (id == 0) {
+ 			pdata->reset_bit = AR933X_RESET_GE0_MAC |
+ 					   AR933X_RESET_GE0_MDIO;
+@@ -1097,6 +1109,8 @@ void __init ath79_register_eth(unsigned
+ 		case ATH79_SOC_AR9330:
+ 		case ATH79_SOC_AR9331:
+ 		case ATH79_SOC_QCA9533:
++		case ATH79_SOC_QCA9561:
++		case ATH79_SOC_TP9343:
+ 			pdata->mii_bus_dev = &ath79_mdio1_device.dev;
+ 			break;
+ 
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -272,6 +272,19 @@ static void __init qca955x_usb_setup(voi
+ 			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
+ 
++static void __init qca956x_usb_setup(void)
++{
++	ath79_usb_register("ehci-platform", 0,
++			   QCA956X_EHCI0_BASE, QCA956X_EHCI_SIZE,
++			   ATH79_IP3_IRQ(0),
++			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
++
++	ath79_usb_register("ehci-platform", 1,
++			   QCA956X_EHCI1_BASE, QCA956X_EHCI_SIZE,
++			   ATH79_IP3_IRQ(1),
++			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
++}
++
+ void __init ath79_register_usb(void)
+ {
+ 	if (soc_is_ar71xx())
+@@ -288,6 +301,8 @@ void __init ath79_register_usb(void)
+ 		ar934x_usb_setup();
+ 	else if (soc_is_qca955x())
+ 		qca955x_usb_setup();
++	else if (soc_is_qca9561())
++		qca956x_usb_setup();
+ 	else
+ 		BUG();
+ }
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -189,6 +189,24 @@ static void qca955x_wmac_setup(void)
+ 		ath79_wmac_data.is_clk_25mhz = true;
+ }
+ 
++static void qca956x_wmac_setup(void)
++{
++	u32 t;
++
++	ath79_wmac_device.name = "qca956x_wmac";
++
++	ath79_wmac_resources[0].start = QCA956X_WMAC_BASE;
++	ath79_wmac_resources[0].end = QCA956X_WMAC_BASE + QCA956X_WMAC_SIZE - 1;
++	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
++
++	t = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
++	if (t & QCA956X_BOOTSTRAP_REF_CLK_40)
++		ath79_wmac_data.is_clk_25mhz = false;
++	else
++		ath79_wmac_data.is_clk_25mhz = true;
++}
++
+ static bool __init
+ ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
+ {
+@@ -392,6 +410,8 @@ void __init ath79_register_wmac(u8 *cal_
+ 		qca953x_wmac_setup();
+ 	else if (soc_is_qca955x())
+ 		qca955x_wmac_setup();
++	else if (soc_is_qca956x())
++		qca956x_wmac_setup();
+ 	else
+ 		BUG();
+ 
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -117,6 +117,8 @@ static void prom_putchar_init(void)
+ 	case REV_ID_MAJOR_QCA9533:
+ 	case REV_ID_MAJOR_QCA9556:
+ 	case REV_ID_MAJOR_QCA9558:
++	case REV_ID_MAJOR_TP9343:
++	case REV_ID_MAJOR_QCA9561:
+ 		_prom_putchar = prom_putchar_ar71xx;
+ 		break;
+ 
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -148,7 +148,8 @@ static void __iomem *ath79_gpio_get_func
+ 	    soc_is_ar913x() ||
+ 	    soc_is_ar933x())
+ 		reg = AR71XX_GPIO_REG_FUNC;
+-	else if (soc_is_ar934x())
++	else if (soc_is_ar934x() ||
++		 soc_is_qca956x())
+ 		reg = AR934X_GPIO_REG_FUNC;
+ 	else
+ 		BUG();
+@@ -228,12 +229,15 @@ void __init ath79_gpio_init(void)
+ 		ath79_gpio_count = QCA953X_GPIO_COUNT;
+ 	else if (soc_is_qca955x())
+ 		ath79_gpio_count = QCA955X_GPIO_COUNT;
++	else if (soc_is_qca956x())
++		ath79_gpio_count = QCA956X_GPIO_COUNT;
+ 	else
+ 		BUG();
+ 
+ 	ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ 	ath79_gpio_chip.ngpio = ath79_gpio_count;
+-	if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x()) {
++	if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x() ||
++	    soc_is_qca956x()) {
+ 		ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
+ 		ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
+ 	}
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -107,7 +107,8 @@ static void __init ath79_misc_irq_init(v
+ 		 soc_is_ar933x() ||
+ 		 soc_is_ar934x() ||
+ 		 soc_is_qca953x() ||
+-		 soc_is_qca955x())
++		 soc_is_qca955x() ||
++		 soc_is_qca956x())
+ 		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+ 	else
+ 		BUG();
+@@ -236,6 +237,99 @@ static void qca955x_irq_init(void)
+ 	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
+ }
+ 
++static void qca956x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
++{
++	u32 status;
++
++	disable_irq_nosync(irq);
++
++	status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
++	status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL;
++
++	if (status == 0) {
++		spurious_interrupt();
++		goto enable;
++	}
++
++	if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) {
++		/* TODO: flush DDR? */
++		generic_handle_irq(ATH79_IP2_IRQ(0));
++	}
++
++	if (status & QCA956X_EXT_INT_WMAC_ALL) {
++		/* TODO: flsuh DDR? */
++		generic_handle_irq(ATH79_IP2_IRQ(1));
++	}
++
++enable:
++	enable_irq(irq);
++}
++
++static void qca956x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc)
++{
++	u32 status;
++
++	disable_irq_nosync(irq);
++
++	status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
++	status &= QCA956X_EXT_INT_PCIE_RC2_ALL |
++		  QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2;
++
++	if (status == 0) {
++		spurious_interrupt();
++		goto enable;
++	}
++
++	if (status & QCA956X_EXT_INT_USB1) {
++		/* TODO: flush DDR? */
++		generic_handle_irq(ATH79_IP3_IRQ(0));
++	}
++
++	if (status & QCA956X_EXT_INT_USB2) {
++		/* TODO: flush DDR? */
++		generic_handle_irq(ATH79_IP3_IRQ(1));
++	}
++
++	if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) {
++		/* TODO: flush DDR? */
++		generic_handle_irq(ATH79_IP3_IRQ(2));
++	}
++
++enable:
++	enable_irq(irq);
++}
++
++static void qca956x_enable_timer_cb(void) {
++	u32 misc;
++
++	misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
++	misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
++	ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc);
++}
++
++static void qca956x_irq_init(void)
++{
++	int i;
++
++	for (i = ATH79_IP2_IRQ_BASE;
++	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
++		irq_set_chip_and_handler(i, &dummy_irq_chip,
++					 handle_level_irq);
++
++	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
++
++	for (i = ATH79_IP3_IRQ_BASE;
++	     i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
++		irq_set_chip_and_handler(i, &dummy_irq_chip,
++					 handle_level_irq);
++
++	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
++
++	/* QCA956x timer init workaround has to be applied right before setting
++	 * up the clock. Else, there will be no jiffies */
++	late_time_init = &qca956x_enable_timer_cb;
++}
++
+ asmlinkage void plat_irq_dispatch(void)
+ {
+ 	unsigned long pending;
+@@ -359,6 +453,9 @@ void __init arch_init_irq(void)
+ 	} else if (soc_is_qca955x()) {
+ 		ath79_ip2_handler = ath79_default_ip2_handler;
+ 		ath79_ip3_handler = ath79_default_ip3_handler;
++	} else if (soc_is_qca956x()) {
++		ath79_ip2_handler = ath79_default_ip2_handler;
++		ath79_ip3_handler = ath79_default_ip3_handler;
+ 	} else {
+ 		BUG();
+ 	}
+@@ -371,4 +468,6 @@ void __init arch_init_irq(void)
+ 		ar934x_ip2_irq_init();
+ 	else if (soc_is_qca955x())
+ 		qca955x_irq_init();
++	else if (soc_is_qca956x())
++		qca956x_irq_init();
+ }
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -1167,6 +1167,12 @@ config SOC_QCA955X
+ 	select PCI_AR724X if PCI
+ 	def_bool n
+ 
++config SOC_QCA956X
++	select USB_ARCH_HAS_EHCI
++	select HW_HAS_PCI
++	select PCI_AR724X if PCI
++	def_bool n
++
+ config ATH79_DEV_M25P80
+ 	select ATH79_DEV_SPI
+ 	def_bool n
+@@ -1204,7 +1210,7 @@ config ATH79_DEV_USB
+ 	def_bool n
+ 
+ config ATH79_DEV_WMAC
+-	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
++	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X)
+ 	def_bool n
+ 
+ config ATH79_NVRAM
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -68,6 +68,21 @@ static const struct ath79_pci_irq qca955
+ 	},
+ };
+ 
++static const struct ath79_pci_irq qca956x_pci_irq_map[] __initconst = {
++	{
++		.bus    = 0,
++		.slot   = 0,
++		.pin    = 1,
++		.irq    = ATH79_PCI_IRQ(0),
++	},
++	{
++		.bus    = 1,
++		.slot   = 0,
++		.pin    = 1,
++		.irq    = ATH79_PCI_IRQ(1),
++	},
++};
++
+ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+ {
+ 	int irq = -1;
+@@ -86,6 +101,9 @@ int __init pcibios_map_irq(const struct
+ 		} else if (soc_is_qca955x()) {
+ 			ath79_pci_irq_map = qca955x_pci_irq_map;
+ 			ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
++		} else if (soc_is_qca9561()) {
++			ath79_pci_irq_map = qca956x_pci_irq_map;
++			ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map);
+ 		} else {
+ 			pr_crit("pci %s: invalid irq map\n",
+ 				pci_name((struct pci_dev *) dev));
+@@ -303,6 +321,15 @@ int __init ath79_register_pci(void)
+ 						 QCA955X_PCI_MEM_SIZE,
+ 						 1,
+ 						 ATH79_IP3_IRQ(2));
++	} else if (soc_is_qca9561()) {
++		pdev = ath79_register_pci_ar724x(0,
++						 QCA956X_PCI_CFG_BASE1,
++						 QCA956X_PCI_CTRL_BASE1,
++						 QCA956X_PCI_CRP_BASE1,
++						 QCA956X_PCI_MEM_BASE1,
++						 QCA956X_PCI_MEM_SIZE,
++						 1,
++						 ATH79_IP3_IRQ(2));
+ 	} else {
+ 		/* No PCI support */
+ 		return -ENODEV;
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -170,15 +170,30 @@ static void __init ath79_detect_sys_type
+ 		rev = id & QCA955X_REV_ID_REVISION_MASK;
+ 		break;
+ 
++	case REV_ID_MAJOR_TP9343:
++		ath79_soc = ATH79_SOC_TP9343;
++		chip = "9343";
++		rev = id & QCA956X_REV_ID_REVISION_MASK;
++		break;
++
++	case REV_ID_MAJOR_QCA9561:
++		ath79_soc = ATH79_SOC_QCA9561;
++		chip = "9561";
++		rev = id & QCA956X_REV_ID_REVISION_MASK;
++		break;
++
+ 	default:
+ 		panic("ath79: unknown SoC, id:0x%08x", id);
+ 	}
+ 
+ 	ath79_soc_rev = rev;
+ 
+-	if (soc_is_qca953x() || soc_is_qca955x())
++	if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca9561())
+ 		sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
+ 			chip, rev);
++	else if (soc_is_tp9343())
++		sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u",
++			chip, rev);
+ 	else
+ 		sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
+ 	pr_info("SoC: %s\n", ath79_sys_type);
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -131,6 +131,23 @@
+ #define QCA955X_NFC_BASE	0x1b800200
+ #define QCA955X_NFC_SIZE	0xb8
+ 
++#define QCA956X_PCI_MEM_BASE1	0x12000000
++#define QCA956X_PCI_MEM_SIZE	0x02000000
++#define QCA956X_PCI_CFG_BASE1	0x16000000
++#define QCA956X_PCI_CFG_SIZE	0x1000
++#define QCA956X_PCI_CRP_BASE1	(AR71XX_APB_BASE + 0x00250000)
++#define QCA956X_PCI_CRP_SIZE	0x1000
++#define QCA956X_PCI_CTRL_BASE1	(AR71XX_APB_BASE + 0x00280000)
++#define QCA956X_PCI_CTRL_SIZE	0x100
++
++#define QCA956X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
++#define QCA956X_WMAC_SIZE	0x20000
++#define QCA956X_EHCI0_BASE	0x1b000000
++#define QCA956X_EHCI1_BASE	0x1b400000
++#define QCA956X_EHCI_SIZE	0x200
++#define QCA956X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
++#define QCA956X_GMAC_SIZE	0x64
++
+ #define AR9300_OTP_BASE		0x14000
+ #define AR9300_OTP_STATUS	0x15f18
+ #define AR9300_OTP_STATUS_TYPE		0x7
+@@ -356,6 +373,49 @@
+ #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
+ #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
+ 
++#define QCA956X_PLL_CPU_CONFIG_REG			0x00
++#define QCA956X_PLL_CPU_CONFIG1_REG			0x04
++#define QCA956X_PLL_DDR_CONFIG_REG			0x08
++#define QCA956X_PLL_DDR_CONFIG1_REG			0x0c
++#define QCA956X_PLL_CLK_CTRL_REG			0x10
++
++#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT		12
++#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK		0x1f
++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT		19
++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK		0x7
++
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT		0
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK		0x1f
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT		5
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK		0x3fff
++#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT		18
++#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK		0x1ff
++
++#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT		16
++#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK		0x1f
++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT		23
++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK		0x7
++
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT		0
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK		0x1f
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT		5
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK		0x3fff
++#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT		18
++#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK		0x1ff
++
++#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
++#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
++#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS		BIT(4)
++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT		5
++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK		0x1f
++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT		10
++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK		0x1f
++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT		15
++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK		0x1f
++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL	BIT(20)
++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL	BIT(21)
++#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
++
+ /*
+  * USB_CONFIG block
+  */
+@@ -403,6 +463,11 @@
+ #define QCA955X_RESET_REG_BOOTSTRAP		0xb0
+ #define QCA955X_RESET_REG_EXT_INT_STATUS	0xac
+ 
++#define QCA956X_RESET_REG_RESET_MODULE		0x1c
++#define QCA956X_RESET_REG_BOOTSTRAP		0xb0
++#define QCA956X_RESET_REG_EXT_INT_STATUS	0xac
++
++#define MISC_INT_MIPS_SI_TIMERINT_MASK	BIT(28)
+ #define MISC_INT_ETHSW			BIT(12)
+ #define MISC_INT_TIMER4			BIT(10)
+ #define MISC_INT_TIMER3			BIT(9)
+@@ -551,6 +616,8 @@
+ 
+ #define QCA955X_BOOTSTRAP_REF_CLK_40	BIT(4)
+ 
++#define QCA956X_BOOTSTRAP_REF_CLK_40	BIT(2)
++
+ #define AR934X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
+ #define AR934X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
+ #define AR934X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
+@@ -600,6 +667,37 @@
+ 	 QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
+ 	 QCA955X_EXT_INT_PCIE_RC2_INT3)
+ 
++#define QCA956X_EXT_INT_WMAC_MISC		BIT(0)
++#define QCA956X_EXT_INT_WMAC_TX			BIT(1)
++#define QCA956X_EXT_INT_WMAC_RXLP		BIT(2)
++#define QCA956X_EXT_INT_WMAC_RXHP		BIT(3)
++#define QCA956X_EXT_INT_PCIE_RC1		BIT(4)
++#define QCA956X_EXT_INT_PCIE_RC1_INT0		BIT(5)
++#define QCA956X_EXT_INT_PCIE_RC1_INT1		BIT(6)
++#define QCA956X_EXT_INT_PCIE_RC1_INT2		BIT(7)
++#define QCA956X_EXT_INT_PCIE_RC1_INT3		BIT(8)
++#define QCA956X_EXT_INT_PCIE_RC2		BIT(12)
++#define QCA956X_EXT_INT_PCIE_RC2_INT0		BIT(13)
++#define QCA956X_EXT_INT_PCIE_RC2_INT1		BIT(14)
++#define QCA956X_EXT_INT_PCIE_RC2_INT2		BIT(15)
++#define QCA956X_EXT_INT_PCIE_RC2_INT3		BIT(16)
++#define QCA956X_EXT_INT_USB1			BIT(24)
++#define QCA956X_EXT_INT_USB2			BIT(28)
++
++#define QCA956X_EXT_INT_WMAC_ALL \
++	(QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \
++	 QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP)
++
++#define QCA956X_EXT_INT_PCIE_RC1_ALL \
++	(QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \
++	 QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \
++	 QCA956X_EXT_INT_PCIE_RC1_INT3)
++
++#define QCA956X_EXT_INT_PCIE_RC2_ALL \
++	(QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \
++	 QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \
++	 QCA956X_EXT_INT_PCIE_RC2_INT3)
++
+ #define REV_ID_MAJOR_MASK		0xfff0
+ #define REV_ID_MAJOR_AR71XX		0x00a0
+ #define REV_ID_MAJOR_AR913X		0x00b0
+@@ -614,6 +712,8 @@
+ #define REV_ID_MAJOR_QCA9533		0x0140
+ #define REV_ID_MAJOR_QCA9556		0x0130
+ #define REV_ID_MAJOR_QCA9558		0x1130
++#define REV_ID_MAJOR_TP9343		0x0150
++#define REV_ID_MAJOR_QCA9561		0x1150
+ 
+ #define AR71XX_REV_ID_MINOR_MASK	0x3
+ #define AR71XX_REV_ID_MINOR_AR7130	0x0
+@@ -638,6 +738,8 @@
+ 
+ #define QCA955X_REV_ID_REVISION_MASK	0xf
+ 
++#define QCA956X_REV_ID_REVISION_MASK	0xf
++
+ /*
+  * SPI block
+  */
+@@ -683,6 +785,19 @@
+ #define AR934X_GPIO_REG_OUT_FUNC5	0x40
+ #define AR934X_GPIO_REG_FUNC		0x6c
+ 
++#define QCA956X_GPIO_REG_OUT_FUNC0	0x2c
++#define QCA956X_GPIO_REG_OUT_FUNC1	0x30
++#define QCA956X_GPIO_REG_OUT_FUNC2	0x34
++#define QCA956X_GPIO_REG_OUT_FUNC3	0x38
++#define QCA956X_GPIO_REG_OUT_FUNC4	0x3c
++#define QCA956X_GPIO_REG_OUT_FUNC5	0x40
++#define QCA956X_GPIO_REG_IN_ENABLE0	0x44
++#define QCA956X_GPIO_REG_IN_ENABLE3	0x50
++#define QCA956X_GPIO_REG_FUNC		0x6c
++
++#define QCA956X_GPIO_OUT_MUX_GE0_MDO	32
++#define QCA956X_GPIO_OUT_MUX_GE0_MDC	33
++
+ #define AR71XX_GPIO_COUNT		16
+ #define AR7240_GPIO_COUNT		18
+ #define AR7241_GPIO_COUNT		20
+@@ -691,6 +806,7 @@
+ #define AR934X_GPIO_COUNT		23
+ #define QCA953X_GPIO_COUNT		24
+ #define QCA955X_GPIO_COUNT		24
++#define QCA956X_GPIO_COUNT		23
+ 
+ /*
+  * SRIF block
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -35,6 +35,8 @@ enum ath79_soc_type {
+ 	ATH79_SOC_QCA9533,
+ 	ATH79_SOC_QCA9556,
+ 	ATH79_SOC_QCA9558,
++	ATH79_SOC_TP9343,
++	ATH79_SOC_QCA9561,
+ };
+ 
+ extern enum ath79_soc_type ath79_soc;
+@@ -126,6 +128,21 @@ static inline int soc_is_qca955x(void)
+ 	return soc_is_qca9556() || soc_is_qca9558();
+ }
+ 
++static inline int soc_is_tp9343(void)
++{
++	return ath79_soc == ATH79_SOC_TP9343;
++}
++ 
++static inline int soc_is_qca9561(void)
++{
++	return ath79_soc == ATH79_SOC_QCA9561;
++}
++
++static inline int soc_is_qca956x(void)
++{
++	return soc_is_tp9343() || soc_is_qca9561();
++}
++
+ extern void __iomem *ath79_ddr_base;
+ extern void __iomem *ath79_gpio_base;
+ extern void __iomem *ath79_pll_base;
diff --git a/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-add-MC-MAC1200R-support.patch b/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-add-MC-MAC1200R-support.patch
new file mode 100644
index 0000000000..0e474e46a4
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-add-MC-MAC1200R-support.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -514,6 +514,16 @@ config ATH79_MACH_R6100
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+ 
++config ATH79_MACH_MC_MAC1200R
++	bool "MERCURY MAC1200R board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
+ config ATH79_MACH_RB4XX
+ 	bool "MikroTik RouterBOARD 4xx series support"
+ 	select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361)	+
+ obj-$(CONFIG_ATH79_MACH_JA76PF)		+= mach-ja76pf.o
+ obj-$(CONFIG_ATH79_MACH_JWAP003)	+= mach-jwap003.o
+ obj-$(CONFIG_ATH79_MACH_HORNET_UB)	+= mach-hornet-ub.o
++obj-$(CONFIG_ATH79_MACH_MC_MAC1200R)     += mach-mc-mac1200r.o
+ obj-$(CONFIG_ATH79_MACH_MR600)		+= mach-mr600.o
+ obj-$(CONFIG_ATH79_MACH_MR900)		+= mach-mr900.o
+ obj-$(CONFIG_ATH79_MACH_MYNET_N600)	+= mach-mynet-n600.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -116,6 +116,7 @@ enum ath79_mach_type {
+ 	ATH79_MACH_TEW_673GRU,		/* TRENDnet TEW-673GRU */
+ 	ATH79_MACH_TEW_712BR,		/* TRENDnet TEW-712BR */
+ 	ATH79_MACH_TEW_732BR,		/* TRENDnet TEW-732BR */
++	ATH79_MACH_MC_MAC1200R,		/* MERCURY MAC1200R*/
+ 	ATH79_MACH_TL_MR10U,		/* TP-LINK TL-MR10U */
+ 	ATH79_MACH_TL_MR11U,		/* TP-LINK TL-MR11U */
+ 	ATH79_MACH_TL_MR13U,		/* TP-LINK TL-MR13U */
diff --git a/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-fix-chained-irq-disable.patch b/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-fix-chained-irq-disable.patch
new file mode 100644
index 0000000000..8cb38d3971
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/736-MIPS-ath79-fix-chained-irq-disable.patch
@@ -0,0 +1,93 @@
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -26,6 +26,8 @@
+ 
+ static void (*ath79_ip2_handler)(void);
+ static void (*ath79_ip3_handler)(void);
++static struct irq_chip ip2_chip;
++static struct irq_chip ip3_chip;
+ 
+ static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
+ {
+@@ -149,8 +151,7 @@ static void ar934x_ip2_irq_init(void)
+ 
+ 	for (i = ATH79_IP2_IRQ_BASE;
+ 	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+-		irq_set_chip_and_handler(i, &dummy_irq_chip,
+-					 handle_level_irq);
++		irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
+ 
+ 	irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
+ }
+@@ -224,15 +225,13 @@ static void qca955x_irq_init(void)
+ 
+ 	for (i = ATH79_IP2_IRQ_BASE;
+ 	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+-		irq_set_chip_and_handler(i, &dummy_irq_chip,
+-					 handle_level_irq);
++		irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
+ 
+ 	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
+ 
+ 	for (i = ATH79_IP3_IRQ_BASE;
+ 	     i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
+-		irq_set_chip_and_handler(i, &dummy_irq_chip,
+-					 handle_level_irq);
++		irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
+ 
+ 	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
+ }
+@@ -313,15 +312,13 @@ static void qca956x_irq_init(void)
+ 
+ 	for (i = ATH79_IP2_IRQ_BASE;
+ 	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+-		irq_set_chip_and_handler(i, &dummy_irq_chip,
+-					 handle_level_irq);
++		irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
+ 
+ 	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
+ 
+ 	for (i = ATH79_IP3_IRQ_BASE;
+ 	     i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
+-		irq_set_chip_and_handler(i, &dummy_irq_chip,
+-					 handle_level_irq);
++		irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
+ 
+ 	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
+ 
+@@ -430,8 +427,35 @@ static void ar934x_ip3_handler(void)
+ 	do_IRQ(ATH79_CPU_IRQ(3));
+ }
+ 
++static void ath79_ip2_disable(struct irq_data *data)
++{
++	disable_irq(ATH79_CPU_IRQ(2));
++}
++
++static void ath79_ip2_enable(struct irq_data *data)
++{
++	enable_irq(ATH79_CPU_IRQ(2));
++}
++
++static void ath79_ip3_disable(struct irq_data *data)
++{
++	disable_irq(ATH79_CPU_IRQ(3));
++}
++
++static void ath79_ip3_enable(struct irq_data *data)
++{
++	enable_irq(ATH79_CPU_IRQ(3));
++}
++
+ void __init arch_init_irq(void)
+ {
++	ip2_chip = dummy_irq_chip;
++	ip3_chip = dummy_irq_chip;
++	ip2_chip.irq_disable = ath79_ip2_disable;
++	ip2_chip.irq_enable = ath79_ip2_enable;
++	ip3_chip.irq_disable = ath79_ip3_disable;
++	ip3_chip.irq_enable = ath79_ip3_enable;
++
+ 	if (soc_is_ar71xx()) {
+ 		ath79_ip2_handler = ar71xx_ip2_handler;
+ 		ath79_ip3_handler = ar71xx_ip3_handler;
diff --git a/target/linux/ar71xx/patches-3.18/901-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-3.18/901-mdio_bitbang_ignore_ta_value.patch
new file mode 100644
index 0000000000..39584aabfa
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/901-mdio_bitbang_ignore_ta_value.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/phy/mdio-bitbang.c
++++ b/drivers/net/phy/mdio-bitbang.c
+@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b
+ 
+ 	ctrl->ops->set_mdio_dir(ctrl, 0);
+ 
+-	/* check the turnaround bit: the PHY should be driving it to zero */
+-	if (mdiobb_get_bit(ctrl) != 0) {
+-		/* PHY didn't drive TA low -- flush any bits it
+-		 * may be trying to send.
+-		 */
+-		for (i = 0; i < 32; i++)
+-			mdiobb_get_bit(ctrl);
+-
+-		return 0xffff;
+-	}
++	mdiobb_get_bit(ctrl);
+ 
+ 	ret = mdiobb_get_num(ctrl, 16);
+ 	mdiobb_get_bit(ctrl);
diff --git a/target/linux/ar71xx/patches-3.18/902-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-3.18/902-unaligned_access_hacks.patch
new file mode 100644
index 0000000000..c77b845313
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/902-unaligned_access_hacks.patch
@@ -0,0 +1,956 @@
+Index: linux-3.18.7/arch/mips/include/asm/checksum.h
+===================================================================
+--- linux-3.18.7.orig/arch/mips/include/asm/checksum.h	2015-02-11 08:01:12.000000000 +0100
++++ linux-3.18.7/arch/mips/include/asm/checksum.h	2015-02-15 01:50:55.118444466 +0100
+@@ -134,26 +134,30 @@
+ 	const unsigned int *stop = word + ihl;
+ 	unsigned int csum;
+ 	int carry;
++	unsigned int w;
+ 
+-	csum = word[0];
+-	csum += word[1];
+-	carry = (csum < word[1]);
++	csum = net_hdr_word(word++);
++
++	w = net_hdr_word(word++);
++	csum += w;
++	carry = (csum < w);
+ 	csum += carry;
+ 
+-	csum += word[2];
+-	carry = (csum < word[2]);
++	w = net_hdr_word(word++);
++	csum += w;
++	carry = (csum < w);
+ 	csum += carry;
+ 
+-	csum += word[3];
+-	carry = (csum < word[3]);
++	w = net_hdr_word(word++);
++	csum += w;
++	carry = (csum < w);
+ 	csum += carry;
+ 
+-	word += 4;
+ 	do {
+-		csum += *word;
+-		carry = (csum < *word);
++		w = net_hdr_word(word++);
++		csum += w;
++		carry = (csum < w);
+ 		csum += carry;
+-		word++;
+ 	} while (word != stop);
+ 
+ 	return csum_fold(csum);
+@@ -222,69 +226,4 @@
+ 	return csum_fold(csum_partial(buff, len, 0));
+ }
+ 
+-#define _HAVE_ARCH_IPV6_CSUM
+-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+-					  const struct in6_addr *daddr,
+-					  __u32 len, unsigned short proto,
+-					  __wsum sum)
+-{
+-	__asm__(
+-	"	.set	push		# csum_ipv6_magic\n"
+-	"	.set	noreorder	\n"
+-	"	.set	noat		\n"
+-	"	addu	%0, %5		# proto (long in network byte order)\n"
+-	"	sltu	$1, %0, %5	\n"
+-	"	addu	%0, $1		\n"
+-
+-	"	addu	%0, %6		# csum\n"
+-	"	sltu	$1, %0, %6	\n"
+-	"	lw	%1, 0(%2)	# four words source address\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 4(%2)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 8(%2)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 12(%2)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 0(%3)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 4(%3)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 8(%3)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 12(%3)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	addu	%0, $1		# Add final carry\n"
+-	"	.set	pop"
+-	: "=r" (sum), "=r" (proto)
+-	: "r" (saddr), "r" (daddr),
+-	  "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
+-
+-	return csum_fold(sum);
+-}
+-
+ #endif /* _ASM_CHECKSUM_H */
+Index: linux-3.18.7/include/uapi/linux/ip.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/ip.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/ip.h	2015-02-15 01:50:55.118444466 +0100
+@@ -102,7 +102,7 @@
+ 	__be32	saddr;
+ 	__be32	daddr;
+ 	/*The options start here. */
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ struct ip_auth_hdr {
+Index: linux-3.18.7/include/uapi/linux/ipv6.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/ipv6.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/ipv6.h	2015-02-15 01:50:55.118444466 +0100
+@@ -125,7 +125,7 @@
+ 
+ 	struct	in6_addr	saddr;
+ 	struct	in6_addr	daddr;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ /* index values for the variables in ipv6_devconf */
+Index: linux-3.18.7/include/uapi/linux/tcp.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/tcp.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/tcp.h	2015-02-15 01:50:55.118444466 +0100
+@@ -54,7 +54,7 @@
+ 	__be16	window;
+ 	__sum16	check;
+ 	__be16	urg_ptr;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ /*
+  *	The union cast uses a gcc extension to avoid aliasing problems
+@@ -64,7 +64,7 @@
+ union tcp_word_hdr { 
+ 	struct tcphdr hdr;
+ 	__be32 		  words[5];
+-}; 
++} __attribute__((packed, aligned(2)));
+ 
+ #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
+ 
+Index: linux-3.18.7/include/uapi/linux/udp.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/udp.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/udp.h	2015-02-15 01:50:55.118444466 +0100
+@@ -24,7 +24,7 @@
+ 	__be16	dest;
+ 	__be16	len;
+ 	__sum16	check;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ /* UDP socket options */
+ #define UDP_CORK	1	/* Never send partially complete segments */
+Index: linux-3.18.7/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c	2015-02-15 01:50:55.118444466 +0100
+@@ -41,8 +41,8 @@
+ 	if (ap == NULL)
+ 		return false;
+ 
+-	tuple->src.u3.ip = ap[0];
+-	tuple->dst.u3.ip = ap[1];
++	tuple->src.u3.ip = net_hdr_word(ap++);
++	tuple->dst.u3.ip = net_hdr_word(ap);
+ 
+ 	return true;
+ }
+Index: linux-3.18.7/include/uapi/linux/icmp.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/icmp.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/icmp.h	2015-02-15 01:50:55.118444466 +0100
+@@ -80,7 +80,7 @@
+ 		__be16	mtu;
+ 	} frag;
+   } un;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ /*
+Index: linux-3.18.7/include/uapi/linux/in6.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/in6.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/in6.h	2015-02-15 01:50:55.118444466 +0100
+@@ -42,7 +42,7 @@
+ #define s6_addr16		in6_u.u6_addr16
+ #define s6_addr32		in6_u.u6_addr32
+ #endif
+-};
++} __attribute__((packed, aligned(2)));
+ #endif /* __UAPI_DEF_IN6_ADDR */
+ 
+ #if __UAPI_DEF_SOCKADDR_IN6
+Index: linux-3.18.7/net/ipv6/tcp_ipv6.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv6/tcp_ipv6.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv6/tcp_ipv6.c	2015-02-15 02:12:55.605235801 +0100
+@@ -39,6 +39,7 @@
+ #include <linux/ipsec.h>
+ #include <linux/times.h>
+ #include <linux/slab.h>
++#include <asm/unaligned.h>
+ #include <linux/uaccess.h>
+ #include <linux/ipv6.h>
+ #include <linux/icmpv6.h>
+@@ -833,10 +834,10 @@
+ 	topt = (__be32 *)(t1 + 1);
+ 
+ 	if (tsecr) {
+-		*topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+-				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
+-		*topt++ = htonl(tsval);
+-		*topt++ = htonl(tsecr);
++		put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
++		put_unaligned_be32(tsval, topt++);
++		put_unaligned_be32(tsecr, topt++);
+ 	}
+ 
+ #ifdef CONFIG_TCP_MD5SIG
+Index: linux-3.18.7/include/linux/ipv6.h
+===================================================================
+--- linux-3.18.7.orig/include/linux/ipv6.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/linux/ipv6.h	2015-02-15 01:50:55.118444466 +0100
+@@ -5,6 +5,7 @@
+ 
+ #define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
+ #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
++
+ /*
+  * This structure contains configuration options per IPv6 link.
+  */
+Index: linux-3.18.7/net/ipv6/datagram.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv6/datagram.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv6/datagram.c	2015-02-15 01:50:55.118444466 +0100
+@@ -374,7 +374,7 @@
+ 				ipv6_iface_scope_id(&sin->sin6_addr,
+ 						    IP6CB(skb)->iif);
+ 		} else {
+-			ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
++			ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
+ 					       &sin->sin6_addr);
+ 			sin->sin6_scope_id = 0;
+ 		}
+@@ -712,12 +712,12 @@
+ 			}
+ 
+ 			if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
+-				if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
++				if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
+ 					err = -EINVAL;
+ 					goto exit_f;
+ 				}
+ 			}
+-			fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
++			fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
+ 			break;
+ 
+ 		case IPV6_2292HOPOPTS:
+Index: linux-3.18.7/net/ipv6/ip6_gre.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv6/ip6_gre.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv6/ip6_gre.c	2015-02-15 01:50:55.118444466 +0100
+@@ -393,7 +393,7 @@
+ 
+ 	t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
+ 				flags & GRE_KEY ?
+-				*(((__be32 *)p) + (grehlen / 4) - 1) : 0,
++				net_hdr_word(((__be32 *)p) + (grehlen / 4) - 1) : 0,
+ 				p[1]);
+ 	if (t == NULL)
+ 		return;
+@@ -475,11 +475,11 @@
+ 			offset += 4;
+ 		}
+ 		if (flags&GRE_KEY) {
+-			key = *(__be32 *)(h + offset);
++			key = net_hdr_word(h + offset);
+ 			offset += 4;
+ 		}
+ 		if (flags&GRE_SEQ) {
+-			seqno = ntohl(*(__be32 *)(h + offset));
++			seqno = ntohl(net_hdr_word(h + offset));
+ 			offset += 4;
+ 		}
+ 	}
+@@ -744,7 +744,7 @@
+ 
+ 		if (tunnel->parms.o_flags&GRE_SEQ) {
+ 			++tunnel->o_seqno;
+-			*ptr = htonl(tunnel->o_seqno);
++			net_hdr_word(ptr) = htonl(tunnel->o_seqno);
+ 			ptr--;
+ 		}
+ 		if (tunnel->parms.o_flags&GRE_KEY) {
+@@ -840,7 +840,7 @@
+ 
+ 	dsfield = ipv6_get_dsfield(ipv6h);
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
+-		fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK);
++		fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK;
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
+ 		fl6.flowlabel |= ip6_flowlabel(ipv6h);
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
+Index: linux-3.18.7/net/ipv6/ip6_tunnel.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv6/ip6_tunnel.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv6/ip6_tunnel.c	2015-02-15 01:50:55.118444466 +0100
+@@ -1291,7 +1291,7 @@
+ 
+ 	dsfield = ipv6_get_dsfield(ipv6h);
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
+-		fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK);
++		fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK;
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
+ 		fl6.flowlabel |= ip6_flowlabel(ipv6h);
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
+Index: linux-3.18.7/net/ipv6/exthdrs.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv6/exthdrs.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv6/exthdrs.c	2015-02-15 01:50:55.118444466 +0100
+@@ -573,7 +573,7 @@
+ 		goto drop;
+ 	}
+ 
+-	pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
++	pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
+ 	if (pkt_len <= IPV6_MAXPLEN) {
+ 		IP6_INC_STATS_BH(net, ipv6_skb_idev(skb),
+ 				 IPSTATS_MIB_INHDRERRORS);
+Index: linux-3.18.7/include/linux/types.h
+===================================================================
+--- linux-3.18.7.orig/include/linux/types.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/linux/types.h	2015-02-15 01:50:55.118444466 +0100
+@@ -213,5 +213,11 @@
+ };
+ #define rcu_head callback_head
+ 
++struct net_hdr_word {
++       u32 words[1];
++} __attribute__((packed, aligned(2)));
++
++#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
++
+ #endif /*  __ASSEMBLY__ */
+ #endif /* _LINUX_TYPES_H */
+Index: linux-3.18.7/net/ipv4/af_inet.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv4/af_inet.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv4/af_inet.c	2015-02-15 01:50:55.118444466 +0100
+@@ -1324,8 +1324,8 @@
+ 	if (unlikely(ip_fast_csum((u8 *)iph, 5)))
+ 		goto out_unlock;
+ 
+-	id = ntohl(*(__be32 *)&iph->id);
+-	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
++	id = ntohl(net_hdr_word(&iph->id));
++	flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
+ 	id >>= 16;
+ 
+ 	for (p = *head; p; p = p->next) {
+Index: linux-3.18.7/net/ipv4/route.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv4/route.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv4/route.c	2015-02-15 01:50:55.118444466 +0100
+@@ -454,7 +454,7 @@
+ 	else if (skb)
+ 		pkey = &ip_hdr(skb)->daddr;
+ 
+-	n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
++	n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
+ 	if (n)
+ 		return n;
+ 	return neigh_create(&arp_tbl, pkey, dev);
+Index: linux-3.18.7/net/ipv4/tcp_output.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv4/tcp_output.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv4/tcp_output.c	2015-02-15 01:50:55.122444370 +0100
+@@ -446,48 +446,53 @@
+ 	u16 options = opts->options;	/* mungable copy */
+ 
+ 	if (unlikely(OPTION_MD5 & options)) {
+-		*ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+-			       (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++			      (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
+ 		/* overload cookie hash location */
+ 		opts->hash_location = (__u8 *)ptr;
+ 		ptr += 4;
+ 	}
+ 
+ 	if (unlikely(opts->mss)) {
+-		*ptr++ = htonl((TCPOPT_MSS << 24) |
+-			       (TCPOLEN_MSS << 16) |
+-			       opts->mss);
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
++			      opts->mss);
+ 	}
+ 
+ 	if (likely(OPTION_TS & options)) {
+ 		if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+-			*ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
+-				       (TCPOLEN_SACK_PERM << 16) |
+-				       (TCPOPT_TIMESTAMP << 8) |
+-				       TCPOLEN_TIMESTAMP);
++			net_hdr_word(ptr++) =
++				htonl((TCPOPT_SACK_PERM << 24) |
++				      (TCPOLEN_SACK_PERM << 16) |
++				      (TCPOPT_TIMESTAMP << 8) |
++				      TCPOLEN_TIMESTAMP);
+ 			options &= ~OPTION_SACK_ADVERTISE;
+ 		} else {
+-			*ptr++ = htonl((TCPOPT_NOP << 24) |
+-				       (TCPOPT_NOP << 16) |
+-				       (TCPOPT_TIMESTAMP << 8) |
+-				       TCPOLEN_TIMESTAMP);
++			net_hdr_word(ptr++) =
++				htonl((TCPOPT_NOP << 24) |
++				      (TCPOPT_NOP << 16) |
++				      (TCPOPT_TIMESTAMP << 8) |
++				      TCPOLEN_TIMESTAMP);
+ 		}
+-		*ptr++ = htonl(opts->tsval);
+-		*ptr++ = htonl(opts->tsecr);
++		net_hdr_word(ptr++) = htonl(opts->tsval);
++		net_hdr_word(ptr++) = htonl(opts->tsecr);
+ 	}
+ 
+ 	if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+-		*ptr++ = htonl((TCPOPT_NOP << 24) |
+-			       (TCPOPT_NOP << 16) |
+-			       (TCPOPT_SACK_PERM << 8) |
+-			       TCPOLEN_SACK_PERM);
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_NOP << 24) |
++			      (TCPOPT_NOP << 16) |
++			      (TCPOPT_SACK_PERM << 8) |
++			      TCPOLEN_SACK_PERM);
+ 	}
+ 
+ 	if (unlikely(OPTION_WSCALE & options)) {
+-		*ptr++ = htonl((TCPOPT_NOP << 24) |
+-			       (TCPOPT_WINDOW << 16) |
+-			       (TCPOLEN_WINDOW << 8) |
+-			       opts->ws);
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_NOP << 24) |
++			      (TCPOPT_WINDOW << 16) |
++			      (TCPOLEN_WINDOW << 8) |
++			      opts->ws);
+ 	}
+ 
+ 	if (unlikely(opts->num_sack_blocks)) {
+@@ -495,16 +500,17 @@
+ 			tp->duplicate_sack : tp->selective_acks;
+ 		int this_sack;
+ 
+-		*ptr++ = htonl((TCPOPT_NOP  << 24) |
+-			       (TCPOPT_NOP  << 16) |
+-			       (TCPOPT_SACK <<  8) |
+-			       (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_NOP << 24) |
++			      (TCPOPT_NOP << 16) |
++			      (TCPOPT_SACK << 8) |
++			      (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
+ 						     TCPOLEN_SACK_PERBLOCK)));
+ 
+ 		for (this_sack = 0; this_sack < opts->num_sack_blocks;
+ 		     ++this_sack) {
+-			*ptr++ = htonl(sp[this_sack].start_seq);
+-			*ptr++ = htonl(sp[this_sack].end_seq);
++			net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
++			net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
+ 		}
+ 
+ 		tp->rx_opt.dsack = 0;
+@@ -513,9 +519,10 @@
+ 	if (unlikely(OPTION_FAST_OPEN_COOKIE & options)) {
+ 		struct tcp_fastopen_cookie *foc = opts->fastopen_cookie;
+ 
+-		*ptr++ = htonl((TCPOPT_EXP << 24) |
+-			       ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) |
+-			       TCPOPT_FASTOPEN_MAGIC);
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_EXP << 24) |
++			      ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) |
++			      TCPOPT_FASTOPEN_MAGIC);
+ 
+ 		memcpy(ptr, foc->val, foc->len);
+ 		if ((foc->len & 3) == 2) {
+Index: linux-3.18.7/net/ipv4/igmp.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv4/igmp.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv4/igmp.c	2015-02-15 01:50:55.122444370 +0100
+@@ -495,7 +495,7 @@
+ 		if (!skb)
+ 			return NULL;
+ 		psrc = (__be32 *)skb_put(skb, sizeof(__be32));
+-		*psrc = psf->sf_inaddr;
++		net_hdr_word(psrc) = psf->sf_inaddr;
+ 		scount++; stotal++;
+ 		if ((type == IGMPV3_ALLOW_NEW_SOURCES ||
+ 		     type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) {
+Index: linux-3.18.7/include/uapi/linux/igmp.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/igmp.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/igmp.h	2015-02-15 01:50:55.122444370 +0100
+@@ -32,7 +32,7 @@
+ 	__u8 code;		/* For newer IGMP */
+ 	__sum16 csum;
+ 	__be32 group;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ /* V3 group record types [grec_type] */
+ #define IGMPV3_MODE_IS_INCLUDE		1
+@@ -48,7 +48,7 @@
+ 	__be16	grec_nsrcs;
+ 	__be32	grec_mca;
+ 	__be32	grec_src[0];
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct igmpv3_report {
+ 	__u8 type;
+@@ -57,7 +57,7 @@
+ 	__be16 resv2;
+ 	__be16 ngrec;
+ 	struct igmpv3_grec grec[0];
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct igmpv3_query {
+ 	__u8 type;
+@@ -78,7 +78,7 @@
+ 	__u8 qqic;
+ 	__be16 nsrcs;
+ 	__be32 srcs[0];
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ #define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
+ #define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
+Index: linux-3.18.7/net/core/flow_dissector.c
+===================================================================
+--- linux-3.18.7.orig/net/core/flow_dissector.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/core/flow_dissector.c	2015-02-15 01:50:55.122444370 +0100
+@@ -53,7 +53,7 @@
+ 		ports = __skb_header_pointer(skb, thoff + poff,
+ 					     sizeof(_ports), data, hlen, &_ports);
+ 		if (ports)
+-			return *ports;
++			return (__be32)net_hdr_word(ports);
+ 	}
+ 
+ 	return 0;
+Index: linux-3.18.7/include/uapi/linux/icmpv6.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/icmpv6.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/icmpv6.h	2015-02-15 01:50:55.122444370 +0100
+@@ -76,7 +76,7 @@
+ #define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
+ #define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
+ #define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ #define ICMPV6_ROUTER_PREF_LOW		0x3
+Index: linux-3.18.7/include/net/ndisc.h
+===================================================================
+--- linux-3.18.7.orig/include/net/ndisc.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/net/ndisc.h	2015-02-15 01:50:55.122444370 +0100
+@@ -76,7 +76,7 @@
+         struct icmp6hdr		icmph;
+ 	__be32			reachable_time;
+ 	__be32			retrans_timer;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct rd_msg {
+ 	struct icmp6hdr icmph;
+@@ -148,10 +148,10 @@
+ {
+ 	const u32 *p32 = pkey;
+ 
+-	return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
+-		(p32[1] * hash_rnd[1]) +
+-		(p32[2] * hash_rnd[2]) +
+-		(p32[3] * hash_rnd[3]));
++	return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
++		(net_hdr_word(&p32[1]) * hash_rnd[1]) +
++		(net_hdr_word(&p32[2]) * hash_rnd[2]) +
++		(net_hdr_word(&p32[3]) * hash_rnd[3]));
+ }
+ 
+ static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
+@@ -168,8 +168,10 @@
+ 	     n = rcu_dereference_bh(n->next)) {
+ 		u32 *n32 = (u32 *) n->primary_key;
+ 		if (n->dev == dev &&
+-		    ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
+-		     (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0)
++		    ((n32[0] ^ net_hdr_word(&p32[0])) |
++			 (n32[1] ^ net_hdr_word(&p32[1])) |
++		     (n32[2] ^ net_hdr_word(&p32[2])) |
++			 (n32[3] ^ net_hdr_word(&p32[3]))) == 0)
+ 			return n;
+ 	}
+ 
+Index: linux-3.18.7/net/sched/cls_u32.c
+===================================================================
+--- linux-3.18.7.orig/net/sched/cls_u32.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/sched/cls_u32.c	2015-02-15 02:14:43.685467248 +0100
+@@ -148,6 +148,7 @@
+ 			data = skb_header_pointer(skb, toff, 4, &hdata);
+ 			if (!data)
+ 				goto out;
++			if ((net_hdr_word(data) ^ key->val) & key->mask) {
+ 			if ((*data ^ key->val) & key->mask) {
+ 				n = rcu_dereference_bh(n->next);
+ 				goto next_knode;
+@@ -201,8 +202,8 @@
+ 						  &hdata);
+ 			if (!data)
+ 				goto out;
+-			sel = ht->divisor & u32_hash_fold(*data, &n->sel,
+-							  n->fshift);
++			sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
++							  &n->sel, n->fshift);
+ 		}
+ 		if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
+ 			goto next_ht;
+Index: linux-3.18.7/net/ipv6/ip6_offload.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv6/ip6_offload.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv6/ip6_offload.c	2015-02-15 02:14:06.541386363 +0100
+@@ -221,7 +221,7 @@
+ 			continue;
+ 
+ 		iph2 = (struct ipv6hdr *)(p->data + off);
+-		first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
++		first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
+ 
+ 		/* All fields must match except length and Traffic Class.
+ 		 * XXX skbs on the gro_list have all been parsed and pulled
+Index: linux-3.18.7/include/net/addrconf.h
+===================================================================
+--- linux-3.18.7.orig/include/net/addrconf.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/net/addrconf.h	2015-02-15 01:50:55.122444370 +0100
+@@ -43,7 +43,7 @@
+ 	__be32			reserved2;
+ 
+ 	struct in6_addr		prefix;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ #include <linux/netdevice.h>
+Index: linux-3.18.7/include/net/inet_ecn.h
+===================================================================
+--- linux-3.18.7.orig/include/net/inet_ecn.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/net/inet_ecn.h	2015-02-15 01:50:55.126444189 +0100
+@@ -115,13 +115,13 @@
+ {
+ 	if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
+ 		return 0;
+-	*(__be32*)iph |= htonl(INET_ECN_CE << 20);
++	net_hdr_word(iph) |= htonl(INET_ECN_CE << 20);
+ 	return 1;
+ }
+ 
+ static inline void IP6_ECN_clear(struct ipv6hdr *iph)
+ {
+-	*(__be32*)iph &= ~htonl(INET_ECN_MASK << 20);
++	net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20);
+ }
+ 
+ static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
+Index: linux-3.18.7/include/net/ipv6.h
+===================================================================
+--- linux-3.18.7.orig/include/net/ipv6.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/net/ipv6.h	2015-02-15 01:50:55.126444189 +0100
+@@ -109,7 +109,7 @@
+ 	__u8	reserved;
+ 	__be16	frag_off;
+ 	__be32	identification;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ #define	IP6_MF		0x0001
+ #define	IP6_OFFSET	0xFFF8
+@@ -398,8 +398,8 @@
+ 	}
+ #endif
+ #endif
+-	addr[0] = wh;
+-	addr[1] = wl;
++	net_hdr_word(&addr[0]) = wh;
++	net_hdr_word(&addr[1]) = wl;
+ }
+ 
+ static inline void ipv6_addr_set(struct in6_addr *addr, 
+@@ -458,6 +458,8 @@
+ 	const __be32 *a1 = addr1->s6_addr32;
+ 	const __be32 *a2 = addr2->s6_addr32;
+ 	unsigned int pdw, pbi;
++	/* Used for last <32-bit fraction of prefix */
++	u32 pbia1, pbia2;
+ 
+ 	/* check complete u32 in prefix */
+ 	pdw = prefixlen >> 5;
+@@ -466,7 +468,9 @@
+ 
+ 	/* check incomplete u32 in prefix */
+ 	pbi = prefixlen & 0x1f;
+-	if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
++	pbia1 = net_hdr_word(&a1[pdw]);
++	pbia2 = net_hdr_word(&a2[pdw]);
++	if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
+ 		return false;
+ 
+ 	return true;
+@@ -609,13 +613,13 @@
+  */
+ static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
+ {
+-	const __be32 *a1 = token1, *a2 = token2;
++	const struct in6_addr *a1 = token1, *a2 = token2;
+ 	int i;
+ 
+ 	addrlen >>= 2;
+ 
+ 	for (i = 0; i < addrlen; i++) {
+-		__be32 xb = a1[i] ^ a2[i];
++		__be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
+ 		if (xb)
+ 			return i * 32 + 31 - __fls(ntohl(xb));
+ 	}
+@@ -739,17 +743,18 @@
+ static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
+ 				__be32 flowlabel)
+ {
+-	*(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
++	net_hdr_word((__be32 *)hdr) =
++		htonl(0x60000000 | (tclass << 20)) | flowlabel;
+ }
+ 
+ static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
+ {
+-	return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
++	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
+ }
+ 
+ static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
+ {
+-	return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
++	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
+ }
+ 
+ static inline u8 ip6_tclass(__be32 flowinfo)
+Index: linux-3.18.7/include/net/secure_seq.h
+===================================================================
+--- linux-3.18.7.orig/include/net/secure_seq.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/net/secure_seq.h	2015-02-15 01:50:55.126444189 +0100
+@@ -2,6 +2,7 @@
+ #define _NET_SECURE_SEQ
+ 
+ #include <linux/types.h>
++#include <linux/in6.h>
+ 
+ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
+ u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+Index: linux-3.18.7/include/uapi/linux/in.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/in.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/in.h	2015-02-15 01:50:55.126444189 +0100
+@@ -78,7 +78,7 @@
+ /* Internet address. */
+ struct in_addr {
+ 	__be32	s_addr;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ #define IP_TOS		1
+ #define IP_TTL		2
+Index: linux-3.18.7/net/core/secure_seq.c
+===================================================================
+--- linux-3.18.7.orig/net/core/secure_seq.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/core/secure_seq.c	2015-02-15 01:50:55.126444189 +0100
+@@ -46,11 +46,12 @@
+ 	u32 secret[MD5_MESSAGE_BYTES / 4];
+ 	u32 hash[MD5_DIGEST_WORDS];
+ 	u32 i;
++	const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
+ 
+ 	net_secret_init();
+ 	memcpy(hash, saddr, 16);
+ 	for (i = 0; i < 4; i++)
+-		secret[i] = net_secret[i] + (__force u32)daddr[i];
++		secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i];
+ 	secret[4] = net_secret[4] +
+ 		(((__force u16)sport << 16) + (__force u16)dport);
+ 	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+@@ -68,11 +69,12 @@
+ 	u32 secret[MD5_MESSAGE_BYTES / 4];
+ 	u32 hash[MD5_DIGEST_WORDS];
+ 	u32 i;
++	const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
+ 
+ 	net_secret_init();
+ 	memcpy(hash, saddr, 16);
+ 	for (i = 0; i < 4; i++)
+-		secret[i] = net_secret[i] + (__force u32) daddr[i];
++		secret[i] = net_secret[i] + (__force u32) daddr6->s6_addr32[i];
+ 	secret[4] = net_secret[4] + (__force u32)dport;
+ 	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+ 		secret[i] = net_secret[i];
+@@ -150,11 +152,12 @@
+ 	u32 hash[MD5_DIGEST_WORDS];
+ 	u64 seq;
+ 	u32 i;
++	const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
+ 
+ 	net_secret_init();
+ 	memcpy(hash, saddr, 16);
+ 	for (i = 0; i < 4; i++)
+-		secret[i] = net_secret[i] + daddr[i];
++		secret[i] = net_secret[i] +  daddr6->s6_addr32[i];
+ 	secret[4] = net_secret[4] +
+ 		(((__force u16)sport << 16) + (__force u16)dport);
+ 	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+Index: linux-3.18.7/net/ipv6/ip6_fib.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv6/ip6_fib.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv6/ip6_fib.c	2015-02-15 01:50:55.126444189 +0100
+@@ -137,7 +137,7 @@
+ 	 * See include/asm-generic/bitops/le.h.
+ 	 */
+ 	return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
+-	       addr[fn_bit >> 5];
++	       net_hdr_word(&addr[fn_bit >> 5]);
+ }
+ 
+ static struct fib6_node *node_alloc(void)
+Index: linux-3.18.7/net/netfilter/nf_conntrack_proto_tcp.c
+===================================================================
+--- linux-3.18.7.orig/net/netfilter/nf_conntrack_proto_tcp.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/netfilter/nf_conntrack_proto_tcp.c	2015-02-15 01:50:55.126444189 +0100
+@@ -456,7 +456,7 @@
+ 
+ 	/* Fast path for timestamp-only option */
+ 	if (length == TCPOLEN_TSTAMP_ALIGNED
+-	    && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
++	    && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
+ 				       | (TCPOPT_NOP << 16)
+ 				       | (TCPOPT_TIMESTAMP << 8)
+ 				       | TCPOLEN_TIMESTAMP))
+Index: linux-3.18.7/net/xfrm/xfrm_input.c
+===================================================================
+--- linux-3.18.7.orig/net/xfrm/xfrm_input.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/xfrm/xfrm_input.c	2015-02-15 01:50:55.126444189 +0100
+@@ -152,8 +152,8 @@
+ 	if (!pskb_may_pull(skb, hlen))
+ 		return -EINVAL;
+ 
+-	*spi = *(__be32 *)(skb_transport_header(skb) + offset);
+-	*seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
++	*spi = net_hdr_word(skb_transport_header(skb) + offset);
++	*seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
+ 	return 0;
+ }
+ 
+Index: linux-3.18.7/net/ipv4/tcp_input.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv4/tcp_input.c	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/net/ipv4/tcp_input.c	2015-02-15 01:50:55.126444189 +0100
+@@ -3677,14 +3677,16 @@
+ {
+ 	const __be32 *ptr = (const __be32 *)(th + 1);
+ 
+-	if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
+-			  | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
++	if (net_hdr_word(ptr) ==
++	    htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++		  (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
+ 		tp->rx_opt.saw_tstamp = 1;
+ 		++ptr;
+-		tp->rx_opt.rcv_tsval = ntohl(*ptr);
++		tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
+ 		++ptr;
+-		if (*ptr)
+-			tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
++		if (net_hdr_word(ptr))
++			tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
++					       tp->tsoffset;
+ 		else
+ 			tp->rx_opt.rcv_tsecr = 0;
+ 		return true;
+Index: linux-3.18.7/include/uapi/linux/if_pppox.h
+===================================================================
+--- linux-3.18.7.orig/include/uapi/linux/if_pppox.h	2015-02-15 01:50:18.000000000 +0100
++++ linux-3.18.7/include/uapi/linux/if_pppox.h	2015-02-15 01:50:55.126444189 +0100
+@@ -47,6 +47,7 @@
+  */
+ struct pptp_addr {
+ 	__u16		call_id;
++	__u16		pad;
+ 	struct in_addr	sin_addr;
+ };
+ 
+Index: linux-3.18.7/net/ipv6/netfilter/nf_log_ipv6.c
+===================================================================
+--- linux-3.18.7.orig/net/ipv6/netfilter/nf_log_ipv6.c	2015-02-11 08:01:12.000000000 +0100
++++ linux-3.18.7/net/ipv6/netfilter/nf_log_ipv6.c	2015-02-15 02:17:44.193854463 +0100
+@@ -63,9 +63,10 @@
+ 	/* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
+ 	nf_log_buf_add(m, "LEN=%Zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
+ 	       ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
++	       (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
+ 	       (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
+ 	       ih->hop_limit,
+-	       (ntohl(*(__be32 *)ih) & 0x000fffff));
++	       (ntohl(net_hdr_word(ih)) & 0x000fffff));
+ 
+ 	fragment = 0;
+ 	ptr = ip6hoff + sizeof(struct ipv6hdr);