diff options
author | Henryk Heisig <hyniu@o2.pl> | 2017-06-16 15:26:30 +0200 |
---|---|---|
committer | Piotr Dymacz <pepe2k@gmail.com> | 2017-06-29 10:37:36 +0200 |
commit | b05c7193fd289ff697324caccf77adf9ffa76373 (patch) | |
tree | e6a96df1048c168ef6f7b3f484a0e5fbaaf27bd9 /target/linux/ar71xx/files | |
parent | 01280bc8dc1d9ca089fad7b231d718e166698f4a (diff) | |
download | upstream-b05c7193fd289ff697324caccf77adf9ffa76373.tar.gz upstream-b05c7193fd289ff697324caccf77adf9ffa76373.tar.bz2 upstream-b05c7193fd289ff697324caccf77adf9ffa76373.zip |
ar71xx: add support for TP-Link Archer C58 v1
TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm
QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 6x LED, 3x button
- UART header on PCB, RX, TX at TP4+5 (backside)
QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to
patch macaddress.
Flash instruction:
Use "factory" image directly in vendor GUI.
Recovery method:
1. Set PC to fixed ip address 192.168.0.66/24.
2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and
rename it to "tp_recovery.bin".
3. Start a tftp server with the file "tp_recovery.bin" in its root
directory.
4. Turn off the router.
5. Press and hold Reset button.
6. Turn on router with the reset button pressed and wait ~15 seconds.
7. Release the reset button and after a short time the firmware should
be transferred from the tftp server.
8. Wait ~30 second to complete recovery.
Flash instruction under U-Boot, using UART:
tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f020000 +$filesize
cp.b $fileaddr 0x9f020000 $filesize
reset
This commit is based on GitHub PR#1112
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Diffstat (limited to 'target/linux/ar71xx/files')
4 files changed, 70 insertions, 6 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 0ae9a11ff6..0584e3896b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1328,6 +1328,16 @@ config ATH79_MACH_ARCHER_C25_V1 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_ARCHER_C58_V1 + bool "TP-LINK Archer C58 v1 support" + select SOC_QCA956X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_ARCHER_C59_V1 bool "TP-LINK Archer C59 v1 support" select SOC_QCA956X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 869920ca30..dd0b729996 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_ATH79_MACH_AP531B0) += mach-ap531b0.o obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o +obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c index d55f9b9f75..f385d4a5a3 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c @@ -1,7 +1,7 @@ /* - * TP-Link Archer C59 v1 board support + * TP-Link Archer C58/C59 v1 board support * - * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl> + * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -65,6 +65,44 @@ #define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000 #define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000 +static struct gpio_led archer_c58_v1_leds_gpio[] __initdata = { + { + .name = "archer-c58-v1:green:power", + .gpio = ARCHER_C59_74HC_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "archer-c58-v1:green:wlan2g", + .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2, + .active_low = 1, + }, + { + .name = "archer-c58-v1:green:wlan5g", + .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5, + .active_low = 1, + }, + { + .name = "archer-c58-v1:green:lan", + .gpio = ARCHER_C59_74HC_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "archer-c58-v1:green:wan", + .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, + { + .name = "archer-c58-v1:amber:wan", + .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, + { + .name = "archer-c58-v1:green:wps", + .gpio = ARCHER_C59_74HC_GPIO_LED_WPS, + .active_low = 1, + }, +}; + static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = { { .name = "archer-c59-v1:green:power", @@ -177,7 +215,7 @@ static struct spi_board_info archer_c59_v1_spi_info[] = { }, }; -static void __init archer_c59_v1_setup(void) +static void __init archer_c5x_v1_setup(void) { u8 *mac = (u8 *) KSEG1ADDR(0x1f010008); u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); @@ -187,9 +225,6 @@ static void __init archer_c59_v1_setup(void) ARRAY_SIZE(archer_c59_v1_spi_info)); platform_device_register(&archer_c59_v1_spi_device); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio), - archer_c59_v1_leds_gpio); - ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL, ARRAY_SIZE(archer_c59_v1_gpio_keys), archer_c59_v1_gpio_keys); @@ -233,5 +268,22 @@ static void __init archer_c59_v1_setup(void) "LED reset"); } +static void __init archer_c58_v1_setup(void) +{ + archer_c5x_v1_setup(); + ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c58_v1_leds_gpio), + archer_c58_v1_leds_gpio); +} + +MIPS_MACHINE(ATH79_MACH_ARCHER_C58_V1, "ARCHER-C58-V1", + "TP-LINK Archer C58 v1", archer_c58_v1_setup); + +static void __init archer_c59_v1_setup(void) +{ + archer_c5x_v1_setup(); + ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio), + archer_c59_v1_leds_gpio); +} + MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1", "TP-LINK Archer C59 v1", archer_c59_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 618abfb1dc..dde6d9735a 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -42,6 +42,7 @@ enum ath79_mach_type { ATH79_MACH_AP96, /* Atheros AP96 */ ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */ ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */ + ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */ ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */ ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ |