aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files/arch
diff options
context:
space:
mode:
authorSebastian Kinne <contact@sebkinne.com>2018-02-13 13:26:33 +1100
committerPiotr Dymacz <pepe2k@gmail.com>2018-02-22 18:53:22 +0100
commit950b278c81cb380df869b0dadc02fa8258a91a6a (patch)
treeb00daa6a85bd2e8cbe5cfdc125afca92fe1fd4bd /target/linux/ar71xx/files/arch
parent2ea98fc39b21392c1556d6768604f54a578278d4 (diff)
downloadupstream-950b278c81cb380df869b0dadc02fa8258a91a6a.tar.gz
upstream-950b278c81cb380df869b0dadc02fa8258a91a6a.tar.bz2
upstream-950b278c81cb380df869b0dadc02fa8258a91a6a.zip
ar71xx: add support for AR9331 based Hak5 devices
This adds support for AR9331 based Hak5 penetration testing tools: - WiFi Pineapple NANO - LAN Turtle - Packet Squirrel WiFi Pineapple NANO specifications: - SoC: Atheros AR9331 (400 MHz) - RAM: 64 MB (DDR2) - FLASH: 16 MB - WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus) - Ethernet: 1x FE over USB (ASIX AX88772A) - Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD - Power: USB 5 V, 1.5 A - Other: status LED, reset button LAN Turtle specifications: - SoC: Atheros AR9331 (400 MHz) - RAM: 64 MB (DDR2) - FLASH: 16 MB - WiFi: none - Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B) - Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot - Power: USB 5 V, 0.5 A - Other: status LED, reset button (inside, on PCB) Packet Squirrel specifications: - SoC: Atheros AR9331 (400 MHz) - RAM: 64 MB (DDR2) - FLASH: 16 MB - WiFi: none - Ethernet: 2x FE (AR9331) - Ports: 2x RJ45, 1x USB 2.0 - Power: USB 5 V, 0.12 A - Other: status LED, reset button, 4-way switch Flash instructions for all 3 devices: Original firmware is based on OpenWrt. Use sysupgrade via SSH to flash. Signed-off-by: Sebastian Kinne <contact@sebkinne.com> [squashed commits, combined and reworked mach files, aligned board naming with general convention, fixed minor issues, tested on real hardware, reworded commit subject and description] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/files/arch')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt19
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile2
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c178
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c107
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h3
5 files changed, 309 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index a9e235fa75..50cc00dca9 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -958,6 +958,16 @@ config ATH79_MACH_WAM250
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_WIFI_PINEAPPLE_NANO
+ bool "Hak5 WiFi Pineapple NANO support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_WRT160NL
bool "Linksys WRT160NL board support"
select SOC_AR913X
@@ -2154,6 +2164,15 @@ config ATH79_MACH_CARAMBOLA2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_LAN_TURTLE
+ bool "Hak5 LAN Turtle and Packet Squirrel support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
config ATH79_MACH_LIMA
bool "8devices Lima board"
select SOC_QCA953X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 181e23a37a..2e63f25399 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -139,6 +139,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o
+obj-$(CONFIG_ATH79_MACH_LAN_TURTLE) += mach-lan-turtle.o
obj-$(CONFIG_ATH79_MACH_LIMA) += mach-lima.o
obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
@@ -246,6 +247,7 @@ obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
obj-$(CONFIG_ATH79_MACH_WAM250) += mach-wam250.o
obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o
obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
+obj-$(CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO) += mach-wifi-pineapple-nano.o
obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o
obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c
new file mode 100644
index 0000000000..d2faa2c740
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c
@@ -0,0 +1,178 @@
+/*
+ * Hak5 LAN Turtle and Packet Squirrel boards support
+ *
+ * Copyright (C) 2018 Sebastian Kinne <seb@hak5.org>
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define LAN_TURTLE_GPIO_BTN_RESET 11
+#define LAN_TURTLE_GPIO_LED_SYS 13
+
+#define PACKET_SQUIRREL_GPIO_BTN_SW1 18
+#define PACKET_SQUIRREL_GPIO_BTN_SW2 20
+#define PACKET_SQUIRREL_GPIO_BTN_SW3 21
+#define PACKET_SQUIRREL_GPIO_BTN_SW4 24
+#define PACKET_SQUIRREL_GPIO_BTN_RESET 11
+#define PACKET_SQUIRREL_GPIO_LED_B 23
+#define PACKET_SQUIRREL_GPIO_LED_G 22
+#define PACKET_SQUIRREL_GPIO_LED_R 19
+
+#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */
+#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL)
+
+static const char *hak5_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data hak5_flash_data = {
+ .part_probes = hak5_part_probes,
+};
+
+/* LAN Turtle */
+static struct gpio_led lan_turtle_leds_gpio[] __initdata = {
+ {
+ .name = "lan-turtle:orange:system",
+ .gpio = LAN_TURTLE_GPIO_LED_SYS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button lan_turtle_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = LAN_TURTLE_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+/* Packet Squirrel */
+static struct gpio_led packet_squirrel_leds_gpio[] __initdata = {
+ {
+ .name = "packet-squirrel:blue:system",
+ .gpio = PACKET_SQUIRREL_GPIO_LED_B,
+ .active_low = 1,
+ }, {
+ .name = "packet-squirrel:green:system",
+ .gpio = PACKET_SQUIRREL_GPIO_LED_G,
+ .active_low = 1,
+ }, {
+ .name = "packet-squirrel:red:system",
+ .gpio = PACKET_SQUIRREL_GPIO_LED_R,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button packet_squirrel_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_SW1,
+ .active_low = 1,
+ }, {
+ .desc = "sw2",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_SW2,
+ .active_low = 1,
+ }, {
+ .desc = "sw3",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_SW3,
+ .active_low = 1,
+ }, {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PACKET_SQUIRREL_GPIO_BTN_SW4,
+ .active_low = 1,
+ },
+};
+
+static void __init hak5_common_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+ ath79_register_m25p80(&hak5_flash_data);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_switch_data.phy_poll_mask = 0xfe;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ /* GPIO11/12 */
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN);
+}
+
+static void __init lan_turtle_setup(void)
+{
+ hak5_common_setup();
+
+ /* GPIO13 */
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(lan_turtle_leds_gpio),
+ lan_turtle_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(lan_turtle_gpio_keys),
+ lan_turtle_gpio_keys);
+}
+
+static void __init packet_squirrel_setup(void)
+{
+ hak5_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(packet_squirrel_leds_gpio),
+ packet_squirrel_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(packet_squirrel_gpio_keys),
+ packet_squirrel_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_LAN_TURTLE, "LAN-TURTLE",
+ "Hak5 LAN Turtle", lan_turtle_setup);
+
+MIPS_MACHINE(ATH79_MACH_PACKET_SQUIRREL, "PACKET-SQUIRREL",
+ "Hak5 Packet Squirrel", packet_squirrel_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c
new file mode 100644
index 0000000000..645f367f6c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c
@@ -0,0 +1,107 @@
+/*
+ * Hak5 WiFi Pineapple NANO board support
+ *
+ * Copyright (C) 2018 Sebastian Kinne <seb@hak5.org>
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM 18
+
+#define WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET 12
+#define WIFI_PINEAPPLE_NANO_GPIO_SD_DET 19
+#define WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM 20
+#define WIFI_PINEAPPLE_NANO_GPIO_USB_POWER 23
+
+#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */
+#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL)
+
+#define WIFI_PINEAPPLE_NANO_MAC1_OFFSET 0x0006
+#define WIFI_PINEAPPLE_NANO_CALDATA_OFFSET 0x1000
+
+static const char *hak5_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data hak5_flash_data = {
+ .part_probes = hak5_part_probes,
+};
+
+static struct gpio_led wifi_pineapple_nano_leds_gpio[] __initdata = {
+ {
+ .name = "wifi-pineapple-nano:blue:system",
+ .gpio = WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wifi_pineapple_nano_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init wifi_pineapple_nano_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&hak5_flash_data);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + WIFI_PINEAPPLE_NANO_MAC1_OFFSET, 0);
+ ath79_register_eth(0);
+
+ /* GPIO11/12 */
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN);
+
+ gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_SD_DET,
+ GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
+ "SD card present");
+
+ gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM,
+ GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
+ "USB alarm");
+
+ gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED |
+ GPIOF_ACTIVE_LOW, "USB power");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wifi_pineapple_nano_leds_gpio),
+ wifi_pineapple_nano_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wifi_pineapple_nano_gpio_keys),
+ wifi_pineapple_nano_gpio_keys);
+
+ ath79_register_usb();
+ ath79_register_wmac(art + WIFI_PINEAPPLE_NANO_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_WIFI_PINEAPPLE_NANO, "WIFI-PINEAPPLE-NANO",
+ "Hak5 WiFi Pineapple NANO", wifi_pineapple_nano_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 9127d3fe92..03020f889e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -135,6 +135,7 @@ enum ath79_mach_type {
ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
ATH79_MACH_JWAP230, /* jjPlus JWAP230 */
+ ATH79_MACH_LAN_TURTLE, /* Hak5 LAN Turtle */
ATH79_MACH_LIMA, /* 8devices Lima */
ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R */
ATH79_MACH_MR12, /* Cisco Meraki MR12 */
@@ -170,6 +171,7 @@ enum ath79_mach_type {
ATH79_MACH_OMY_G1, /* OMYlink OMY-G1 */
ATH79_MACH_OMY_X1, /* OMYlink OMY-X1 */
ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */
+ ATH79_MACH_PACKET_SQUIRREL, /* Hak5 Packet Squirrel */
ATH79_MACH_PB42, /* Atheros PB42 */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
ATH79_MACH_PQI_AIR_PEN, /* PQI Air Pen */
@@ -323,6 +325,7 @@ enum ath79_mach_type {
ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
+ ATH79_MACH_WIFI_PINEAPPLE_NANO, /* Hak5 WiFi Pineapple NANO */
ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */
ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */