diff options
author | David Bauer <mail@david-bauer.net> | 2018-05-29 17:00:53 +0200 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-06-07 09:31:58 +0200 |
commit | e36f8b3f3980903d5cefc51fe274c19c7a0719f2 (patch) | |
tree | 9b3a86a9d695efc09b565dcf88f14dbe28da7253 /target/linux/ar71xx/config-4.9 | |
parent | a84962ea35e4e97f1c4a42f2eac0242cc2cbd879 (diff) | |
download | upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.gz upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.bz2 upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.zip |
ar71xx: add support for OCEDO Koala
This commit adds support for the OCEDO Koala
SOC: Qualcomm QCA9558 (Scorpion)
RAM: 128MB
FLASH: 16MiB
WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3
WLAN2: QCA9880 5 GHz 802.11nac 3x3
INPUT: RESET button
LED: Power, LAN, WiFi 2.4, WiFi 5, SYS
Serial: Header Next to Black metal shield
Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet
- 2.4 GHz WiFi
- 5 GHz WiFi
- TFTP boot from ramdisk image
- Installation via ramdisk image
- OpenWRT sysupgrade
- Buttons
- LEDs
Installation seems to be possible only through booting an OpenWRT
ramdisk image.
Hold down the reset button while powering on the device. It will load a
ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8.
Note: depending on the present software, the device might also try to
pull a file called 'koala-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.
Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.
Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with
> fw_setenv bootcmd run bootcmd_1
Afterwards you can reboot the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ar71xx/config-4.9')
-rw-r--r-- | target/linux/ar71xx/config-4.9 | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 9eae158ebe..0c0f8f50a1 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -133,6 +133,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_JA76PF is not set # CONFIG_ATH79_MACH_JWAP003 is not set # CONFIG_ATH79_MACH_JWAP230 is not set +# CONFIG_ATH79_MACH_KOALA is not set # CONFIG_ATH79_MACH_LAN_TURTLE is not set # CONFIG_ATH79_MACH_LIMA is not set # CONFIG_ATH79_MACH_MC_MAC1200R is not set |