diff options
| author | Mantas Pucka <mantas@8devices.com> | 2017-05-08 13:28:38 +0300 |
|---|---|---|
| committer | Piotr Dymacz <pepe2k@gmail.com> | 2017-05-15 22:43:33 +0200 |
| commit | 68b5d34f69421264de6e5d77760fcc2bfe9ee687 (patch) | |
| tree | f6e3f9a783b577cdc4acd484f1198873ed54e134 /target/linux/ar71xx/base-files | |
| parent | 43a7a1a05e0906f8adacd9c09b5c0be79fc94de1 (diff) | |
| download | upstream-68b5d34f69421264de6e5d77760fcc2bfe9ee687.tar.gz upstream-68b5d34f69421264de6e5d77760fcc2bfe9ee687.tar.bz2 upstream-68b5d34f69421264de6e5d77760fcc2bfe9ee687.zip | |
ar71xx: add support for 8devices Rambutan development board
Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan
This commit adds basic support for Rambutan development kit
Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header
Flash instructions:
Stock firmware is OpenWrt, so use:
sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar
or upgarde from GUI (don't save config)
Use factory image to flash from U-Boot:
tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi
nand erase.part ubi
nand write 80060000 ubi ${filesize}
Signed-off-by: Mantas Pucka <mantas@8devices.com>
[split support in uboot-envtools package into a separate commit,
fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files')
4 files changed, 14 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 945167bee6..4db1b148a2 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -74,6 +74,9 @@ case "$FIRMWARE" in ath9k_eeprom_extract "caldata" 4096 2048 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0) ;; + rambutan) + ath9k_eeprom_extract "art" 4096 2048 + ;; z1) . /lib/upgrade/nand.sh diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 92ee516235..5c3b1a7e1b 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -811,6 +811,9 @@ ar71xx_board_detect() { *"R6100") name="r6100" ;; + *"Rambutan"*) + name="rambutan" + ;; *"RE450") name="re450" ;; diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx index 50f59defe1..277287d383 100644 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx +++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx @@ -44,6 +44,12 @@ preinit_set_mac_address() { mac_wan=$(mtd_get_mac_binary caldata 6) [ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan" ;; + rambutan) + mac_lan=$(mtd_get_mac_binary art 0) + [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" + mac_wan=$(mtd_get_mac_binary art 6) + [ -n "$mac_wan" ] && ifconfig eth1 hw ether "$mac_wan" + ;; tew-632brp) fetch_mac_from_mtd config lan_mac wan_mac ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 5be678ea36..8ebdea3018 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -521,6 +521,7 @@ platform_check_image() { c-60|\ nbg6716|\ r6100|\ + rambutan|\ wndr3700v4|\ wndr4300) nand_do_platform_check $board $1 @@ -663,6 +664,7 @@ platform_pre_upgrade() { c-60|\ nbg6716|\ r6100|\ + rambutan|\ rb-411|\ rb-411u|\ rb-433|\ |