diff options
author | Serg Studzinskii <serguzhg@gmail.com> | 2017-03-08 22:10:05 +0200 |
---|---|---|
committer | Piotr Dymacz <pepe2k@gmail.com> | 2017-06-11 21:32:17 +0200 |
commit | b7cc6616152a12b3f68c5f36e9ef052da5de889e (patch) | |
tree | a32a392b58844a8d0b38b4f24d2bb7595f324e75 /target/linux/ar71xx/base-files/lib/ar71xx.sh | |
parent | 641af0c39d071c8fb33d90ac3b4d369d34c61dfb (diff) | |
download | upstream-b7cc6616152a12b3f68c5f36e9ef052da5de889e.tar.gz upstream-b7cc6616152a12b3f68c5f36e9ef052da5de889e.tar.bz2 upstream-b7cc6616152a12b3f68c5f36e9ef052da5de889e.zip |
ar71xx: add support for TP-Link TL-WR942N v1
TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on
Qualcomm/Atheros QCA9561.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x USB 2.0
- 11x LED (most are controlled by 74HC595)
- 2x button
- UART header on PCB*
* Serial console is disabled in OEM non-beta firmwares and corresponding
GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by
production (non-beta) U-Boot and firmware.
Currently not working:
1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs
by some U-Boot versions.
Flash instruction under vendor GUI:
1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin".
2. Go to WEB interface and perform usual firmware upgrade.
FLash instruction under U-Boot recovery mode (doesn't work in beta
firmware):
1. Setup PC with static IP "192.168.0.66/24" and tftp server.
2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make
it available to download from your tftp server.
3. Press "reset" button and power up the router, wait till "WPS" LED
turns on.
Flash instruction under U-Boot, using UART (can be done only with
preinstalled UART-enabled U-Boot version!):
1. Use "tpl" to stop autobooting and obtain U-Boot CLI access.
2. Setup ip addresses for U-Boot and your tftp server.
3. Issue below commands:
tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin
erase 0x9f020000 +$filesize
cp.b 0x81000000 0x9f020000 $filesize
reset
Signed-off-by: Serg Studzinskii <serguzhg@gmail.com>
[minor code style fixes, extended commit message]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/lib/ar71xx.sh')
-rwxr-xr-x | target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index e781c6ee7e..5660d3eaa9 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -1166,6 +1166,9 @@ ar71xx_board_detect() { *"TL-WR941ND") name="tl-wr941nd" ;; + *"TL-WR942N v1") + name="tl-wr942n-v1" + ;; *"Tube2H") name="tube2h" ;; |