diff options
| author | Keith Maika <keithm@aoeex.com> | 2018-06-15 00:39:09 -0400 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-07-30 14:04:45 +0200 |
| commit | 4caab808300ad75575d778bae6e184caa26aeabc (patch) | |
| tree | 787765d5401038139b55a77be6e88172e30742f9 /target/linux/ar71xx/base-files/etc/board.d | |
| parent | a3d2448fae5499356a31d71585a812ac65e7a39a (diff) | |
| download | upstream-4caab808300ad75575d778bae6e184caa26aeabc.tar.gz upstream-4caab808300ad75575d778bae6e184caa26aeabc.tar.bz2 upstream-4caab808300ad75575d778bae6e184caa26aeabc.zip | |
ar71xx: add support for TP-Link Archer C59 v2
TP-Link Archer C59v2 is a dual-band AC1350 router based on
Qualcomm/Atheros QCA9561+QCA9886 chips.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- USB 2.0 port
- UART header on PCB
Flash instruction:
- via web UI:
1. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin
2. Login to router and open the Advanced tab
3. Navigate to System Tools -> Firmware Upgrade
4. Upload firmware using the Manual Upgrade form
- via TFTP:
1. Set PC to fixed ip address 192.168.0.66
2. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin
and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.
Signed-off-by: Keith Maika <keithm@aoeex.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/02_network | 1 |
2 files changed, 4 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index d15cff5111..af480cb001 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -129,6 +129,7 @@ archer-c7) ;; archer-c58-v1|\ archer-c59-v1|\ +archer-c59-v2|\ archer-c60-v1|\ archer-c60-v2) ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E" @@ -137,7 +138,8 @@ archer-c60-v2) ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" case "$board" in - archer-c59-v1) + archer-c59-v1|\ + archer-c59-v2) ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" ;; esac diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 3967dee94b..75c90a2701 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -249,6 +249,7 @@ ar71xx_setup_interfaces() ;; archer-c58-v1|\ archer-c59-v1|\ + archer-c59-v2|\ fritz4020|\ rb-450g) ucidef_set_interfaces_lan_wan "eth1.1" "eth0" |