kernel: bump 4.14 to 4.14.78

Refreshed all patches.

Remove upstreamed:
- 050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

1 files changed, 0 insertions, 48 deletions

diff --git a/target/linux/apm821xx/patches-4.14/050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch b/target/linux/apm821xx/patches-4.14/050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch
deleted file mode 100644
index 05e29f963e..0000000000
--- a/target/linux/apm821xx/patches-4.14/050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 08e39982ef64f800fd1f9b9b92968d14d5fafa82 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Mon, 17 Sep 2018 17:22:40 +0200
-Subject: net: emac: fix fixed-link setup for the RTL8363SB switch
-
-On the Netgear WNDAP620, the emac ethernet isn't receiving nor
-xmitting any frames from/to the RTL8363SB (identifies itself
-as a RTL8367RB).
-
-This is caused by the emac hardware not knowing the forced link
-parameters for speed, duplex, pause, etc.
-
-This begs the question, how this was working on the original
-driver code, when it was necessary to set the phy_address and
-phy_map to 0xffffffff. But I guess without access to the old
-PPC405/440/460 hardware, it's not possible to know.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/ibm/emac/core.c | 15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/ibm/emac/core.c
-+++ b/drivers/net/ethernet/ibm/emac/core.c
-@@ -2671,12 +2671,17 @@ static int emac_init_phy(struct emac_ins
- 		if (of_phy_is_fixed_link(np)) {
- 			int res = emac_dt_mdio_probe(dev);
- 
--			if (!res) {
--				res = of_phy_register_fixed_link(np);
--				if (res)
--					mdiobus_unregister(dev->mii_bus);
-+			if (res)
-+				return res;
-+
-+			res = of_phy_register_fixed_link(np);
-+			dev->phy_dev = of_phy_find_device(np);
-+			if (res || !dev->phy_dev) {
-+				mdiobus_unregister(dev->mii_bus);
-+				return res ? res : -EINVAL;
- 			}
--			return res;
-+			emac_adjust_link(dev->ndev);
-+			put_device(&dev->phy_dev->mdio.dev);
- 		}
- 		return 0;
- 	}