strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

96 files changed, 12973 insertions, 0 deletions

diff --git a/target/linux/adm5120/Makefile b/target/linux/adm5120/Makefile
new file mode 100644
index 0000000000..f8436c04ed
--- /dev/null
+++ b/target/linux/adm5120/Makefile
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mipsel
+BOARD:=adm5120
+BOARDNAME:=ADM5120 (Little Endian)
+FEATURES:=squashfs jffs2 tgz broken
+
+LINUX_VERSION:=2.6.22.4
+
+define Target/Description
+	Build firmware images for Infineon/ADMtek ADM5120 based boards
+	(e.g : RouterBoard RB1xx, Compex WP54G-WRT ...)
+endef
+
+include $(INCLUDE_DIR)/kernel-build.mk
+DEFAULT_PACKAGES += admswconfig
+
+# include the profiles
+-include profiles/*.mk
+
+$(eval $(call BuildKernel))
diff --git a/target/linux/adm5120/base-files/default/sbin/wget2nand b/target/linux/adm5120/base-files/default/sbin/wget2nand
new file mode 100755
index 0000000000..adb56b946f
--- /dev/null
+++ b/target/linux/adm5120/base-files/default/sbin/wget2nand
@@ -0,0 +1,64 @@
+#!/bin/sh
+# wget2nand
+# This script can be used to download a TGZ file from your build system which
+# contains the files to be installed on the NAND flash on your RB1xx card.
+# The one parameter is the URL of the TGZ file to be downloaded.
+# Licence GPL V2
+# Author david.goodenough@linkchoose.co.uk
+# Based on cf2nand from RB532 support
+. /etc/functions.sh
+
+[ -d /tmp/wget2nand ] && {
+	echo "/tmp/wget2nand already exists"
+	exit 1
+}
+
+# first get an address for br-lan using udhcpc
+killall udhcpc
+/sbin/udhcpc -i br-lan
+
+# need to find the wget server from the command line
+url=$1
+[ -z "$url" ] && {
+	echo "No URL specified for image TGZ"
+	echo "Usage : $0 URL"
+	exit 1
+} 
+
+boot="$(find_mtd_part 'RouterBoard NAND Boot')"
+main="$(find_mtd_part 'rootfs')"
+[ -z "$boot" -o -z "$main" ] && {
+	echo "Cannot find NAND Flash partitions"
+	exit 1
+}
+
+echo "Erasing filesystem."
+mtd erase Boot 2>/dev/null >/dev/null
+mtd erase Main 2>/dev/null >/dev/null
+
+echo "Mounting $main as new root and $boot as boot partition"
+
+mkdir /tmp/wget2nand/
+mkdir /tmp/wget2nand-boot
+mount -t yaffs2 "$main" /tmp/wget2nand/
+mount -t yaffs2 "$boot" /tmp/wget2nand-boot
+
+echo "Copying filesystem..."
+( wget -O - $url/openwrt-adm5120-2.6-rootfs.tgz) | ( cd /tmp/wget2nand/; tar xvz )
+wget -O /tmp/wget2nand-boot/kernel $url/openwrt-adm5120-2.6-rb1xx-vmlinux
+
+chmod +x /tmp/wget2nand-boot/kernel
+
+# make sure everything is written before we unmount the partitions
+echo "chmod ugo+x /" > /tmp/wget2nand/etc/uci-defaults/set_root_permission
+sync
+ls /tmp/wget2nand-boot/
+ls /tmp/wget2nand/
+# unmount the partitions and remove the directories into which they were mounted
+umount /tmp/wget2nand-boot
+umount /tmp/wget2nand
+rmdir /tmp/wget2nand-boot
+rmdir /tmp/wget2nand
+
+# all done
+echo "Image written, you can now reboot.  Remember to change the boot source to Boot from Nand"
diff --git a/target/linux/adm5120/config/default b/target/linux/adm5120/config/default
new file mode 100644
index 0000000000..593d98ce4f
--- /dev/null
+++ b/target/linux/adm5120/config/default
@@ -0,0 +1,289 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_ADM5120_CPU_OVERRIDES=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARM_AMBA=y
+# CONFIG_ATM_DRIVERS is not set
+CONFIG_BASE_SMALL=0
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BINFMT_MISC=m
+CONFIG_BITREVERSE=y
+CONFIG_CIFS_DEBUG2=y
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit"
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_DDB5477 is not set
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ELF_CORE=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_FS_MBCACHE=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ACL=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HID=m
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+# CONFIG_IDE is not set
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_INPUT=y
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IRQ_CPU=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JOLIET is not set
+CONFIG_LEDS_ADM5120=y
+CONFIG_LEDS_ADM5120_DIAG=y
+# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_MII=m
+# CONFIG_MINIX_FS is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_ADM5120=y
+CONFIG_MIPS_ADM5120_ENET=y
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_EV64120 is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_ADM5120=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_RB100=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NETDEV_1000 is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PARTITION_ADVANCED is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_ADM5120=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNPACPI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_RTC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_ADM5120 is not set
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
+CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
+# CONFIG_SERIAL_AMBA_PL011 is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_USB=y
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_ACM is not set
+CONFIG_USB_ADM5120_HCD=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_V4L1=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_YAFFS_9BYTE_TAGS=y
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_AUTO_YAFFS2=y
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_YAFFS_YAFFS1=y
+CONFIG_YAFFS_YAFFS2=y
+# CONFIG_ZD1211RW is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files/arch/mips/adm5120/Kconfig
new file mode 100644
index 0000000000..7738d8175b
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/Kconfig
@@ -0,0 +1,20 @@
+if MIPS_ADM5120
+
+menu "ADM5120 Implementation Options"
+
+config ADM5120_CPU_OVERRIDES
+	bool "Enable CPU feature overrides"
+	default y
+
+config PCI_ADM5120
+	bool "Enable PCI support"
+	select PCI
+	default y
+
+endmenu
+
+config ARM_AMBA
+	bool
+	default y
+
+endif
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/Makefile
new file mode 100644
index 0000000000..bb0a7c8b06
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+obj-y	:= setup.o prom.o irq.o memory.o adm5120_info.o
+obj-y	+= board.o
+obj-y	+= clock.o
+obj-y	+= gpio.o
+obj-y	+= platform.o
+obj-y	+= reset.o
+obj-y	+= time.o
+
+obj-y	+= trxsplit.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c
new file mode 100644
index 0000000000..e2ee5ca565
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c
@@ -0,0 +1,93 @@
+/*
+ *  $Id$
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+unsigned int adm5120_product_code;
+unsigned int adm5120_revision;
+unsigned int adm5120_package;
+unsigned int adm5120_nand_boot;
+unsigned long adm5120_speed;
+
+#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+
+/*
+ * CPU settings detection
+ */
+#define CODE_GET_PC(c)		((c) & CODE_PC_MASK)
+#define CODE_GET_REV(c)		(((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
+#define CODE_GET_PK(c)		(((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
+#define CODE_GET_CLKS(c)	(((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
+#define CODE_GET_NAB(c)		(((c) & CODE_NAB) != 0)
+
+void adm5120_ndelay(u32 ns)
+{
+	u32	t;
+
+	SWITCH_WRITE(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
+	SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
+
+	t = (ns+640) / 640;
+	t &= TIMER_PERIOD_MASK;
+	SWITCH_WRITE(SWITCH_REG_TIMER, t | TIMER_TE);
+
+	/* wait until the timer expires */
+	do {
+		t = SWITCH_READ(SWITCH_REG_TIMER_INT);
+	} while ((t & TIMER_INT_TOS) == 0);
+
+	/* leave the timer disabled */
+	SWITCH_WRITE(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
+	SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
+}
+
+void __init adm5120_soc_init(void)
+{
+	u32 code;
+	u32 clks;
+
+	code = SWITCH_READ(SWITCH_REG_CODE);
+
+	adm5120_product_code = CODE_GET_PC(code);
+	adm5120_revision = CODE_GET_REV(code);
+	adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
+		ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
+	adm5120_nand_boot = CODE_GET_NAB(code);
+
+	clks = CODE_GET_CLKS(code);
+	adm5120_speed = ADM5120_SPEED_175;
+	if (clks & 1)
+		adm5120_speed += 25000000;
+	if (clks & 2)
+		adm5120_speed += 50000000;
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/board.c b/target/linux/adm5120/files/arch/mips/adm5120/board.c
new file mode 100644
index 0000000000..74bacaa2e8
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/board.c
@@ -0,0 +1,129 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 generic board code
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static LIST_HEAD(adm5120_boards);
+static char adm5120_board_name[ADM5120_BOARD_NAMELEN];
+
+const char *get_system_type(void)
+{
+	return adm5120_board_name;
+}
+
+static struct adm5120_board * __init adm5120_board_find(unsigned long machtype)
+{
+	struct list_head *this;
+	struct adm5120_board *board;
+	void *ret;
+
+	ret = NULL;
+	list_for_each(this, &adm5120_boards) {
+		board = list_entry(this, struct adm5120_board, list);
+		if (board->mach_type == machtype) {
+			ret = board;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int __init adm5120_board_setup(void)
+{
+	struct adm5120_board *board;
+	int err;
+
+	board = adm5120_board_find(mips_machtype);
+	if (board == NULL) {
+		printk(KERN_ALERT "adm5120: no board registered for machtype %lu"
+			", trying generic\n", mips_machtype);
+		board = adm5120_board_find(MACH_ADM5120_GENERIC);
+		if (board == NULL)
+			panic("adm5120: unsupported board\n");
+	}
+
+	printk(KERN_INFO "adm5120: setting up board '%s'\n", board->name);
+
+	memcpy(&adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN);
+
+	adm5120_board_reset = board->board_reset;
+	if (board->eth_num_ports > 0)
+		adm5120_eth_num_ports = board->eth_num_ports;
+
+	if (board->eth_vlans)
+		memcpy(adm5120_eth_vlans, board->eth_vlans,
+			sizeof(adm5120_eth_vlans));
+
+
+	if (board->board_setup)
+		board->board_setup();
+
+	/* register UARTs */
+	amba_device_register(&adm5120_uart0_device, &iomem_resource);
+	amba_device_register(&adm5120_uart1_device, &iomem_resource);
+
+	/* register PCI controller */
+	if (adm5120_package_bga())
+		platform_device_register(&adm5120_pci_device);
+
+	/* register board devices */
+	if (board->num_devices > 0 && board->devices != NULL ) {
+		err = platform_add_devices(board->devices, board->num_devices);
+		if (err)
+			printk(KERN_ALERT "adm5120: adding board devices failed\n");
+	}
+
+	return 0;
+}
+
+void __init adm5120_board_register(struct adm5120_board *board)
+{
+	list_add(&board->list, &adm5120_boards);
+	printk(KERN_INFO "adm5120: registered board '%s'\n", board->name);
+}
+
+void __init adm5120_register_boards(struct adm5120_board **boards,
+		int num)
+{
+	int i;
+
+	for (i=0; i<num; i++)
+		adm5120_board_register(boards[i]);
+}
+
+arch_initcall(adm5120_board_setup);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile
new file mode 100644
index 0000000000..a05c891565
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for platforms based on ADM5120 SoC
+#
+
+obj-y	+= generic.o
+obj-y	+= cellvision.o
+obj-y	+= compex.o
+obj-y	+= edimax.o
+obj-y	+= infineon.o
+obj-y	+= mikrotik.o
+obj-y	+= zyxel.o
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c
new file mode 100644
index 0000000000..f7d44e2574
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c
@@ -0,0 +1,192 @@
+/*
+ *  $Id$
+ *
+ *  Cellvision/SparkLAN boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN5, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN5, 1);
+		break;
+	}
+}
+
+static struct mtd_partition cas6xx_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 32*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 32*1024,
+	} , {
+		.name	= "nvfs1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64*1024,
+	} , {
+		.name	= "nvfs2",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct mtd_partition cas7xx_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 32*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 32*1024,
+	} , {
+		.name	= "nvfs",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 128*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *cas6xx_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static struct platform_device *cas7xx_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static void __init cas6xx_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL);	/* for flash A20 line */
+	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
+	adm5120_flash0_data.parts = cas6xx_partitions;
+
+	/* TODO: setup mac address */
+}
+
+static void __init cas7xx_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL);	/* for flash A20 line */
+	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
+	adm5120_flash0_data.parts = cas7xx_partitions;
+
+	/* TODO: setup mac address */
+}
+
+static struct adm5120_board cas630_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS630,
+	.name		= "Cellvision CAS-630/630W",
+	.board_setup	= cas6xx_setup,
+	.eth_num_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas6xx_devices),
+	.devices	= cas6xx_devices,
+};
+
+static struct adm5120_board cas670_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS670,
+	.name		= "Cellvision CAS-670/670W",
+	.board_setup	= cas6xx_setup,
+	.eth_num_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas6xx_devices),
+	.devices	= cas6xx_devices,
+};
+
+static struct adm5120_board cas700_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS700,
+	.name		= "Cellvision CAS-700/700W",
+	.board_setup	= cas7xx_setup,
+	.eth_num_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static struct adm5120_board cas771_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS771,
+	.name		= "Cellvision CAS-771/771W",
+	.board_setup	= cas7xx_setup,
+	.eth_num_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static struct adm5120_board cas790_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS790,
+	.name		= "Cellvision CAS-790",
+	.board_setup	= cas7xx_setup,
+	.eth_num_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static struct adm5120_board cas861_board __initdata = {
+	.mach_type	= MACH_ADM5120_CAS861,
+	.name		= "Cellvision CAS-861/861W",
+	.board_setup	= cas7xx_setup,
+	.eth_num_ports	= 1,
+	.num_devices	= ARRAY_SIZE(cas7xx_devices),
+	.devices	= cas7xx_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&cas630_board);
+	adm5120_board_register(&cas670_board);
+	adm5120_board_register(&cas700_board);
+	adm5120_board_register(&cas771_board);
+	adm5120_board_register(&cas790_board);
+	adm5120_board_register(&cas861_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c
new file mode 100644
index 0000000000..620179744e
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c
@@ -0,0 +1,222 @@
+/*
+ *  $Id$
+ *
+ *  Compex boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN5, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN5, 1);
+		break;
+	}
+}
+
+static void wp54_reset(void)
+{
+	gpio_set_value(ADM5120_GPIO_PIN3, 0);
+}
+
+static struct mtd_partition wp54g_wrt_partitions[] = {
+	{
+		.name	= "cfe",
+		.offset	= 0,
+		.size	= 0x050000,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "trx",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 0x3A0000,
+	} , {
+		.name	= "nvram",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 0x010000,
+	}
+};
+
+static struct platform_device *np2xg_devices[] __initdata = {
+	&adm5120_flash0_device,
+	&adm5120_usbc_device,
+};
+
+static struct platform_device *wp54_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static void __init np2xg_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+
+	/* TODO: setup mac address */
+}
+
+static void __init wp54_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
+	gpio_direction_output(ADM5120_GPIO_PIN3, 1);
+
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+
+	/* TODO: setup mac address */
+}
+
+static void __init wp54_wrt_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
+	gpio_direction_output(ADM5120_GPIO_PIN3, 1);
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
+	adm5120_flash0_data.parts = wp54g_wrt_partitions;
+
+	/* TODO: setup mac address */
+}
+
+unsigned char np27g_vlans[6] __initdata = {
+	/* FIXME: untested */
+	0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+unsigned char np28g_vlans[6] __initdata = {
+	/* FIXME: untested */
+	0x41, 0x42, 0x44, 0x48, 0x00, 0x00
+};
+
+unsigned char wp54_vlans[6] __initdata = {
+	/* FIXME: untested */
+	0x41, 0x42, 0x00, 0x00, 0x00, 0x00
+};
+
+static struct adm5120_board np27g_board __initdata = {
+	.mach_type	= MACH_ADM5120_NP27G,
+	.name		= "Compex NetPassage 27G",
+	.board_setup	= np2xg_setup,
+	.eth_num_ports	= 5,
+	.eth_vlans	= np27g_vlans,
+	.num_devices	= ARRAY_SIZE(np2xg_devices),
+	.devices	= np2xg_devices,
+};
+
+static struct adm5120_board np28g_board __initdata = {
+	.mach_type	= MACH_ADM5120_NP28G,
+	.name		= "Compex NetPassage 28G",
+	.board_setup	= np2xg_setup,
+	.eth_num_ports	= 4,
+	.eth_vlans	= np28g_vlans,
+	.num_devices	= ARRAY_SIZE(np2xg_devices),
+	.devices	= np2xg_devices,
+};
+
+static struct adm5120_board wp54ag_board __initdata = {
+	.mach_type	= MACH_ADM5120_WP54AG,
+	.name		= "Compex WP54AG",
+	.board_setup	= wp54_setup,
+	.board_reset	= wp54_reset,
+	.eth_num_ports	= 2,
+	.eth_vlans	= wp54_vlans,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static struct adm5120_board wp54g_board __initdata = {
+	.mach_type	= MACH_ADM5120_WP54G,
+	.name		= "Compex WP54G",
+	.board_setup	= wp54_setup,
+	.board_reset	= wp54_reset,
+	.eth_num_ports	= 2,
+	.eth_vlans	= wp54_vlans,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static struct adm5120_board wp54g_wrt_board __initdata = {
+	.mach_type	= MACH_ADM5120_WP54G,
+	.name		= "Compex WP54G-WRT",
+	.board_setup	= wp54_wrt_setup,
+	.board_reset	= wp54_reset,
+	.eth_num_ports	= 2,
+	.eth_vlans	= wp54_vlans,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static struct adm5120_board wpp54ag_board __initdata = {
+	.mach_type	= MACH_ADM5120_WPP54AG,
+	.name		= "Compex WPP54AG",
+	.board_setup	= wp54_setup,
+	.board_reset	= wp54_reset,
+	.eth_num_ports	= 2,
+	.eth_vlans	= wp54_vlans,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static struct adm5120_board wpp54g_board __initdata = {
+	.mach_type	= MACH_ADM5120_WPP54G,
+	.name		= "Compex WPP54G",
+	.board_setup	= wp54_setup,
+	.board_reset	= wp54_reset,
+	.eth_num_ports	= 2,
+	.eth_vlans	= wp54_vlans,
+	.num_devices	= ARRAY_SIZE(wp54_devices),
+	.devices	= wp54_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&np27g_board);
+	adm5120_board_register(&np28g_board);
+	adm5120_board_register(&wp54ag_board);
+	adm5120_board_register(&wp54g_board);
+	adm5120_board_register(&wp54g_wrt_board);
+	adm5120_board_register(&wpp54ag_board);
+	adm5120_board_register(&wpp54g_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c
new file mode 100644
index 0000000000..a184cbce44
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c
@@ -0,0 +1,84 @@
+/*
+ *  $Id$
+ *
+ *  Edimax boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static struct mtd_partition br6104k_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 32*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 32*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *br6104k_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static void __init br6104k_setup(void) {
+	/* setup data for flash0 device */
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions);
+	adm5120_flash0_data.parts = br6104k_partitions;
+
+	/* TODO: setup mac addresses, if possible */
+}
+
+unsigned char br6104k_vlans[6] = {
+	0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+static struct adm5120_board br6104k_board __initdata = {
+	.mach_type	= MACH_ADM5120_BR6104K,
+	.name		= "Edimax BR-6104K",
+	.board_setup	= br6104k_setup,
+	.eth_num_ports	= 5,
+	.eth_vlans	= br6104k_vlans,
+	.num_devices	= ARRAY_SIZE(br6104k_devices),
+	.devices	= br6104k_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&br6104k_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c
new file mode 100644
index 0000000000..de78ca40ea
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c
@@ -0,0 +1,53 @@
+/*
+ *  $Id$
+ *
+ *  Generic ADM5120 based board
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static struct platform_device *generic_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static struct adm5120_board generic_board __initdata = {
+	.mach_type	= MACH_ADM5120_GENERIC,
+	.name		= "Generic ADM5120 board",
+	.eth_num_ports	= 6,
+	.num_devices	= ARRAY_SIZE(generic_devices),
+	.devices	= generic_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&generic_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c
new file mode 100644
index 0000000000..ebeb5aa87b
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c
@@ -0,0 +1,167 @@
+/*
+ *  $Id$
+ *
+ *  Infineon boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio3(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN3, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN3, 1);
+		break;
+	}
+}
+
+static void switch_bank_gpio5(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN5, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN5, 1);
+		break;
+	}
+}
+
+static struct mtd_partition easy_partitions[] = {
+	{
+		.name	= "admboot",
+		.offset	= 0,
+		.size	= 64*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "boardcfg",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64*1024,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *easy5120pata_devices[] __initdata = {
+	&adm5120_flash0_device,
+	/* TODO: add VINETIC2 device? */
+};
+
+static struct platform_device *easy5120rt_devices[] __initdata = {
+	&adm5120_flash0_device,
+	&adm5120_usbc_device
+};
+
+static struct platform_device *easy5120wvoip_devices[] __initdata = {
+	&adm5120_flash0_device,
+	/* TODO: add VINETIC2 device? */
+};
+
+static struct platform_device *easy83000_devices[] __initdata = {
+	&adm5120_flash0_device,
+	/* TODO: add VINAX device? */
+};
+
+static void __init easy_setup_pqfp(void)
+{
+	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */
+	gpio_direction_output(ADM5120_GPIO_PIN3, 0);
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio3;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
+	adm5120_flash0_data.parts = easy_partitions;
+
+	/* TODO: setup mac addresses */
+}
+
+static void __init easy_setup_bga(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
+	adm5120_flash0_data.parts = easy_partitions;
+
+	/* TODO: setup mac addresses */
+}
+
+static struct adm5120_board easy5120pata_board __initdata = {
+	.mach_type	= MACH_ADM5120_EASY5120PATA,
+	.name		= "Infineon EASY 5120P-ATA Reference Board",
+	.board_setup	= easy_setup_pqfp,
+	.eth_num_ports	= 6,
+	.num_devices	= ARRAY_SIZE(easy5120pata_devices),
+	.devices	= easy5120pata_devices,
+};
+
+static struct adm5120_board easy5120rt_board __initdata = {
+	.mach_type	= MACH_ADM5120_EASY5120RT,
+	.name		= "Infineon EASY 5120-RT Reference Board",
+	.board_setup	= easy_setup_bga,
+	.eth_num_ports	= 5,
+	.num_devices	= ARRAY_SIZE(easy5120rt_devices),
+	.devices	= easy5120rt_devices,
+};
+
+static struct adm5120_board easy5120wvoip_board __initdata = {
+	.mach_type	= MACH_ADM5120_EASY5120WVOIP,
+	.name		= "Infineon EASY 5120-WVoIP Reference Board",
+	.board_setup	= easy_setup_bga,
+	.eth_num_ports	= 6,
+	.num_devices	= ARRAY_SIZE(easy5120wvoip_devices),
+	.devices	= easy5120wvoip_devices,
+};
+
+static struct adm5120_board easy83000_board __initdata = {
+	.mach_type	= MACH_ADM5120_EASY83000,
+	.name		= "Infineon EASY 83000 Reference Board",
+	.board_setup	= easy_setup_pqfp,
+	.eth_num_ports	= 6,
+	.num_devices	= ARRAY_SIZE(easy83000_devices),
+	.devices	= easy83000_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&easy5120pata_board);
+	adm5120_board_register(&easy5120rt_board);
+	adm5120_board_register(&easy5120wvoip_board);
+	adm5120_board_register(&easy83000_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c
new file mode 100644
index 0000000000..f233772d0d
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c
@@ -0,0 +1,172 @@
+/*
+ *  $Id$
+ *
+ *  Mikrotik RouterBOARDs 111/112/133/133C/150/153
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static struct mtd_partition rb1xx_partitions[] = {
+	{
+		.name	= "booter",
+		.offset	= 0,
+		.size	= 64*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "firmware",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *rb1xx_devices[] __initdata = {
+	&adm5120_flash0_device,
+	&adm5120_nand_device,
+};
+
+static struct platform_device *rb150_devices[] __initdata = {
+	&adm5120_flash0_device,
+	/* TODO: nand device is not yet supported */
+};
+
+static void __init rb1xx_setup(void)
+{
+	/* setup data for flash0 device */
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions);
+	adm5120_flash0_data.parts = rb1xx_partitions;
+
+	/* TODO: setup mac address */
+}
+
+#if 0
+/*
+ * RB1xx boards have bad network performance with the default VLAN matrixes.
+ * Disable it while the ethernet driver gets fixed.
+ */
+static unsigned char rb11x_vlans[6] __initdata = {
+	/* FIXME: untested */
+	0x41, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static unsigned char rb133_vlans[6] __initdata = {
+	/* FIXME: untested */
+	0x44, 0x42, 0x41, 0x00, 0x00, 0x00
+};
+
+static unsigned char rb133c_vlans[6] __initdata = {
+	/* FIXME: untested */
+	0x44, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static unsigned char rb15x_vlans[6] __initdata = {
+	/* FIXME: untested */
+	0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+#else
+static unsigned char rb_vlans[6] __initdata = {
+	0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+#define rb11x_vlans	rb_vlans
+#define rb133_vlans	rb_vlans
+#define rb133c_vlans	rb_vlans
+#define rb15x_vlans	rb_vlans
+#endif
+
+static struct adm5120_board rb111_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_111,
+	.name		= "Mikrotik RouterBOARD 111",
+	.board_setup	= rb1xx_setup,
+	.eth_num_ports	= 1,
+	.eth_vlans	= rb11x_vlans,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static struct adm5120_board rb112_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_112,
+	.name		= "Mikrotik RouterBOARD 112",
+	.board_setup	= rb1xx_setup,
+	.eth_num_ports	= 1,
+	.eth_vlans	= rb11x_vlans,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static struct adm5120_board rb133_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_133,
+	.name		= "Mikrotik RouterBOARD 133",
+	.board_setup	= rb1xx_setup,
+	.eth_num_ports	= 3,
+	.eth_vlans	= rb133_vlans,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static struct adm5120_board rb133c_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_133C,
+	.name		= "Mikrotik RouterBOARD 133C",
+	.board_setup	= rb1xx_setup,
+	.eth_num_ports	= 1,
+	.eth_vlans	= rb133c_vlans,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static struct adm5120_board rb150_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_150,
+	.name		= "Mikrotik RouterBOARD 150",
+	.board_setup	= rb1xx_setup,
+	.eth_num_ports	= 5,
+	.eth_vlans	= rb15x_vlans,
+	.num_devices	= ARRAY_SIZE(rb150_devices),
+	.devices	= rb150_devices,
+};
+
+static struct adm5120_board rb153_board __initdata = {
+	.mach_type	= MACH_ADM5120_RB_153,
+	.name		= "Mikrotik RouterBOARD 153",
+	.board_setup	= rb1xx_setup,
+	.eth_num_ports	= 5,
+	.eth_vlans	= rb15x_vlans,
+	.num_devices	= ARRAY_SIZE(rb1xx_devices),
+	.devices	= rb1xx_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&rb111_board);
+	adm5120_board_register(&rb112_board);
+	adm5120_board_register(&rb133_board);
+	adm5120_board_register(&rb133c_board);
+	adm5120_board_register(&rb150_board);
+	adm5120_board_register(&rb153_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c
new file mode 100644
index 0000000000..0a60205ebf
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c
@@ -0,0 +1,127 @@
+/*
+ *  $Id$
+ *
+ *  ZyXEL Prestige P-334/P-335 boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+	switch (bank) {
+	case 0:
+		gpio_set_value(ADM5120_GPIO_PIN5, 0);
+		break;
+	case 1:
+		gpio_set_value(ADM5120_GPIO_PIN5, 1);
+		break;
+	}
+}
+
+static struct mtd_partition p33x_partitions[] = {
+	{
+		.name	= "bootbase",
+		.offset	= 0,
+		.size	= 16*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "rom",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 16*1024,
+	} , {
+		.name	= "bootext",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 96*1024,
+		.mask_flags = MTD_WRITEABLE,
+	} , {
+		.name	= "trx",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	} , {
+		.name	= "firmware",
+		.offset	= 32*1024,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device *p334_devices[] __initdata = {
+	&adm5120_flash0_device,
+};
+
+static struct platform_device *p335_devices[] __initdata = {
+	&adm5120_flash0_device,
+	&adm5120_usbc_device,
+};
+
+static void __init p33x_setup(void)
+{
+	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+	/* setup data for flash0 device */
+	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+	adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
+	adm5120_flash0_data.parts = p33x_partitions;
+
+	/* TODO: setup mac address */
+}
+
+unsigned char p33x_vlans[6] __initdata = {
+	/* FIXME: untested */
+	0x50, 0x48, 0x44, 0x42, 0x41, 0x00
+};
+
+static struct adm5120_board p334wt_board __initdata = {
+	.mach_type	= MACH_ADM5120_P334WT,
+	.name		= "ZyXEL Prestige 334WT",
+	.board_setup	= p33x_setup,
+	.eth_num_ports	= 5,
+	.eth_vlans	= p33x_vlans,
+	.num_devices	= ARRAY_SIZE(p334_devices),
+	.devices	= p334_devices,
+};
+
+static struct adm5120_board p335_board __initdata = {
+	.mach_type	= MACH_ADM5120_P335,
+	.name		= "ZyXEL Prestige 335/335WT",
+	.board_setup	= p33x_setup,
+	.eth_num_ports	= 5,
+	.eth_vlans	= p33x_vlans,
+	.num_devices	= ARRAY_SIZE(p335_devices),
+	.devices	= p335_devices,
+};
+
+static int __init register_boards(void)
+{
+	adm5120_board_register(&p334wt_board);
+	adm5120_board_register(&p335_board);
+	return 0;
+}
+
+pure_initcall(register_boards);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/clock.c b/target/linux/adm5120/files/arch/mips/adm5120/clock.c
new file mode 100644
index 0000000000..4a8b69b4cb
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/clock.c
@@ -0,0 +1,76 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 minimal CLK API implementation
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was based on the CLK API implementation in:
+ *	arch/mips/tx4938/toshiba_rbtx4938/setup.c
+ *	Copyright (C) 2000-2001 Toshiba Corporation
+ *	2003-2005 (c) MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+
+struct clk {
+	unsigned long rate;
+};
+
+static struct clk uart_clk = {
+	.rate = ADM5120_UART_CLOCK
+};
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+       if (!strcmp(id, "UARTCLK"))
+               return &uart_clk;
+
+       return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+       return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+       return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/gpio.c b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c
new file mode 100644
index 0000000000..d073b659ad
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c
@@ -0,0 +1,356 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 GPIO support
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+typedef void __iomem *	gpio_reg_t;
+#define GPIO_READ(r)	readl((r))
+#define GPIO_WRITE(v,r)	writel((v),(r))
+#define GPIO_REG(r)	(gpio_reg_t)(KSEG1ADDR(ADM5120_SWITCH_BASE)+r)
+
+struct adm5120_gpio_line {
+	u32 flags;
+	const char *label;
+};
+
+#define GPIO_FLAG_VALID		0x01
+#define GPIO_FLAG_USED		0x02
+
+struct led_desc {
+	gpio_reg_t reg;	/* LED register address */
+	u8 iv_shift;	/* shift amount for input bit */
+	u8 mode_shift;	/* shift amount for mode bits */
+};
+
+#define LED_DESC(_port,_led) { \
+		.reg = GPIO_REG(SWITCH_REG_PORT0_LED+_port*4), \
+		.iv_shift = LED0_IV_SHIFT+_led, \
+		.mode_shift = _led*4 \
+	}
+
+static struct led_desc led_table[15] = {
+	LED_DESC(0, 0), LED_DESC(0, 1), LED_DESC(0, 2),
+	LED_DESC(1, 0), LED_DESC(1, 1), LED_DESC(1, 2),
+	LED_DESC(2, 0), LED_DESC(2, 1), LED_DESC(2, 2),
+	LED_DESC(3, 0), LED_DESC(3, 1), LED_DESC(3, 2),
+	LED_DESC(4, 0), LED_DESC(4, 1), LED_DESC(4, 2)
+};
+
+static struct adm5120_gpio_line adm5120_gpio_map[ADM5120_GPIO_COUNT] = {
+	[ADM5120_GPIO_PIN0] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_PIN1] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_PIN2] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_PIN3] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_PIN4] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_PIN5] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_PIN6] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_PIN7] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P0L0] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P0L1] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P0L2] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P1L0] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P1L1] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P1L2] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P2L0] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P2L1] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P2L2] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P3L0] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P3L1] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P3L2] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P4L0] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P4L1] = {.flags = GPIO_FLAG_VALID},
+	[ADM5120_GPIO_P4L2] = {.flags = GPIO_FLAG_VALID}
+};
+
+#define gpio_is_invalid(g) ( \
+		(g) > ADM5120_GPIO_MAX || \
+		((adm5120_gpio_map[(g)].flags & GPIO_FLAG_VALID) == 0) \
+	)
+
+#define gpio_is_used(g)	((adm5120_gpio_map[(g)].flags & GPIO_FLAG_USED) != 0)
+
+/*
+ * Helpers for GPIO lines in GPIO_CONF0 register
+ */
+#define PIN_IM(p)	((1 << GPIO_CONF0_IM_SHIFT) << p)
+#define PIN_IV(p)	((1 << GPIO_CONF0_IV_SHIFT) << p)
+#define PIN_OE(p)	((1 << GPIO_CONF0_OE_SHIFT) << p)
+#define PIN_OV(p)	((1 << GPIO_CONF0_OV_SHIFT) << p)
+
+static inline int pins_direction_input(unsigned pin)
+{
+	gpio_reg_t *reg;
+	u32 t;
+
+	reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
+
+	t = GPIO_READ(reg);
+	t &= ~(PIN_OE(pin));
+	t |= PIN_IM(pin);
+	GPIO_WRITE(t,reg);
+
+	return 0;
+}
+
+static inline int pins_direction_output(unsigned pin, int value)
+{
+	gpio_reg_t *reg;
+	u32 t;
+
+	reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
+
+	t = GPIO_READ(reg);
+	t &= ~(PIN_IM(pin) | PIN_OV(pin));
+	t |= PIN_OE(pin);
+
+	if (value)
+		t |= PIN_OV(pin);
+
+	GPIO_WRITE(t,reg);
+
+	return 0;
+}
+
+static inline int pins_get_value(unsigned pin)
+{
+	gpio_reg_t *reg;
+	u32 t;
+
+	reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
+
+	t = GPIO_READ(reg);
+	if ((t & PIN_IM(pin)) != 0)
+		t &= PIN_IV(pin);
+	else
+		t &= PIN_OV(pin);
+
+	return (t) ? 1 : 0;
+}
+
+static inline void pins_set_value(unsigned pin, int value)
+{
+	gpio_reg_t *reg;
+	u32 t;
+
+	reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
+
+	t = GPIO_READ(reg);
+	if (value == 0)
+		t &= ~(PIN_OV(pin));
+	else
+		t |= PIN_OV(pin);
+
+	GPIO_WRITE(t,reg);
+}
+
+/*
+ * Helpers for GPIO lines in PORTx_LED registers
+ */
+static inline int leds_direction_input(unsigned led)
+{
+	gpio_reg_t *reg;
+	u32 t;
+
+	reg = led_table[led].reg;
+	t = GPIO_READ(reg);
+	t &= ~(LED_MODE_MASK << led_table[led].mode_shift);
+	GPIO_WRITE(t,reg);
+
+	return 0;
+}
+
+static inline int leds_direction_output(unsigned led, int value)
+{
+	gpio_reg_t *reg;
+	u32 t, s;
+
+	reg = led_table[led].reg;
+	s = led_table[led].mode_shift;
+
+	t = GPIO_READ(reg);
+	t &= ~(LED_MODE_MASK << s);
+
+	switch (value) {
+	case ADM5120_GPIO_LOW:
+		t |= (LED_MODE_OUT_LOW << s);
+		break;
+	case ADM5120_GPIO_FLASH:
+	case ADM5120_GPIO_LINK:
+	case ADM5120_GPIO_SPEED:
+	case ADM5120_GPIO_DUPLEX:
+	case ADM5120_GPIO_ACT:
+	case ADM5120_GPIO_COLL:
+	case ADM5120_GPIO_LINK_ACT:
+	case ADM5120_GPIO_DUPLEX_COLL:
+	case ADM5120_GPIO_10M_ACT:
+	case ADM5120_GPIO_100M_ACT:
+		t |= ((value & LED_MODE_MASK) << s);
+		break;
+	default:
+		t |= (LED_MODE_OUT_HIGH << s);
+		break;
+	}
+
+	GPIO_WRITE(t,reg);
+
+	return 0;
+}
+
+static inline int leds_get_value(unsigned led)
+{
+	gpio_reg_t *reg;
+	u32 t, m;
+
+	reg = led_table[led].reg;
+
+	t = GPIO_READ(reg);
+	m = (t >> led_table[led].mode_shift) & LED_MODE_MASK;
+	if (m == LED_MODE_INPUT)
+		return (t >> led_table[led].iv_shift) & 1;
+
+	if (m == LED_MODE_OUT_LOW)
+		return 0;
+
+	return 1;
+}
+
+/*
+ * Main GPIO support routines
+ */
+int adm5120_gpio_direction_input(unsigned gpio)
+{
+	if (gpio_is_invalid(gpio))
+		return -EINVAL;
+
+	if (gpio < ADM5120_GPIO_P0L0)
+		return pins_direction_input(gpio);
+
+	gpio -= ADM5120_GPIO_P0L0;
+	return leds_direction_input(gpio);
+}
+
+int adm5120_gpio_direction_output(unsigned gpio, int value)
+{
+	if (gpio_is_invalid(gpio))
+		return -EINVAL;
+
+	if (gpio < ADM5120_GPIO_P0L0)
+		return pins_direction_output(gpio, value);
+
+	gpio -= ADM5120_GPIO_P0L0;
+	return leds_direction_output(gpio, value);
+}
+
+int adm5120_gpio_get_value(unsigned gpio)
+{
+	if (gpio < ADM5120_GPIO_P0L0)
+		return pins_get_value(gpio);
+
+	gpio -= ADM5120_GPIO_P0L0;
+	return leds_get_value(gpio);
+}
+
+void adm5120_gpio_set_value(unsigned gpio, int value)
+{
+	if (gpio < ADM5120_GPIO_P0L0) {
+		pins_set_value(gpio, value);
+		return;
+	}
+
+	gpio -= ADM5120_GPIO_P0L0;
+	leds_direction_output(gpio, value);
+}
+
+int adm5120_gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio_is_invalid(gpio))
+		return -EINVAL;
+
+	if (gpio_is_used(gpio))
+		return -EBUSY;
+
+	adm5120_gpio_map[gpio].flags |= GPIO_FLAG_USED;
+	adm5120_gpio_map[gpio].label = label;
+
+	return 0;
+}
+
+void adm5120_gpio_free(unsigned gpio)
+{
+	if (gpio_is_invalid(gpio))
+		return;
+
+	adm5120_gpio_map[gpio].flags &= ~GPIO_FLAG_USED;
+	adm5120_gpio_map[gpio].label = NULL;
+}
+
+int adm5120_gpio_to_irq(unsigned gpio)
+{
+	/* FIXME: not yet implemented */
+	return -EINVAL;
+}
+
+int adm5120_irq_to_gpio(unsigned irq)
+{
+	/* FIXME: not yet implemented */
+	return -EINVAL;
+}
+
+static int __init adm5120_gpio_init(void)
+{
+	int i;
+
+	if (adm5120_package_pqfp()) {
+		/* GPIO pins 4-7 are unavailable in ADM5120P */
+		for (i=ADM5120_GPIO_PIN4; i<=ADM5120_GPIO_PIN7; i++)
+			adm5120_gpio_map[i].flags &= ~GPIO_FLAG_VALID;
+	}
+
+	return 0;
+}
+
+pure_initcall(adm5120_gpio_init);
+
+EXPORT_SYMBOL(adm5120_gpio_direction_output);
+EXPORT_SYMBOL(adm5120_gpio_direction_input);
+EXPORT_SYMBOL(adm5120_gpio_get_value);
+EXPORT_SYMBOL(adm5120_gpio_set_value);
+EXPORT_SYMBOL(adm5120_gpio_request);
+EXPORT_SYMBOL(adm5120_gpio_free);
+EXPORT_SYMBOL(adm5120_gpio_to_irq);
+EXPORT_SYMBOL(adm5120_irq_to_gpio);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/irq.c b/target/linux/adm5120/files/arch/mips/adm5120/irq.c
new file mode 100644
index 0000000000..8d6fbe6a3c
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/irq.c
@@ -0,0 +1,203 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific interrupt handlers
+ *
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/bitops.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+#define INTC_REG(r) (*(volatile u32 *)(KSEG1ADDR(ADM5120_INTC_BASE) + r))
+
+static void adm5120_intc_irq_unmask(unsigned int irq);
+static void adm5120_intc_irq_mask(unsigned int irq);
+static int  adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type);
+
+static struct irq_chip adm5120_intc_irq_chip = {
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+	.name 		= "INTC",
+#else
+	.typename 	= "INTC",
+#endif
+	.unmask 	= adm5120_intc_irq_unmask,
+	.mask 		= adm5120_intc_irq_mask,
+	.mask_ack	= adm5120_intc_irq_mask,
+	.set_type	= adm5120_intc_irq_set_type
+};
+
+static struct irqaction adm5120_intc_irq_action = {
+	.handler 	= no_action,
+	.name 		= "cascade [INTC]"
+};
+
+static void adm5120_intc_irq_unmask(unsigned int irq)
+{
+	unsigned long flags;
+
+	irq -= ADM5120_INTC_IRQ_BASE;
+	local_irq_save(flags);
+	INTC_REG(INTC_REG_IRQ_ENABLE) = (1 << irq);
+	local_irq_restore(flags);
+}
+
+static void adm5120_intc_irq_mask(unsigned int irq)
+{
+	unsigned long flags;
+
+	irq -= ADM5120_INTC_IRQ_BASE;
+	local_irq_save(flags);
+	INTC_REG(INTC_REG_IRQ_DISABLE) = (1 << irq);
+	local_irq_restore(flags);
+}
+
+static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	/* TODO: not yet tested */
+#if 1
+	unsigned int sense;
+	unsigned long mode;
+	int err;
+
+	err = 0;
+	sense = flow_type & (IRQ_TYPE_SENSE_MASK);
+	switch (sense) {
+	case IRQ_TYPE_NONE:
+	case IRQ_TYPE_LEVEL_HIGH:
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		switch (irq) {
+		case ADM5120_IRQ_GPIO2:
+		case ADM5120_IRQ_GPIO4:
+			break;
+		default:
+			err = -EINVAL;
+			break;
+		}
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+	
+	if (err)
+		return err;
+	
+	switch (irq) {
+	case ADM5120_IRQ_GPIO2:
+	case ADM5120_IRQ_GPIO4:
+		mode = INTC_REG(INTC_REG_INT_MODE);
+		if (sense == IRQ_TYPE_LEVEL_LOW)
+			mode |= (1 << (irq-ADM5120_INTC_IRQ_BASE));
+		else
+			mode &= (1 << (irq-ADM5120_INTC_IRQ_BASE));
+			
+		INTC_REG(INTC_REG_INT_MODE) = mode;
+		/* fallthrogh */
+	default:
+		irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
+		irq_desc[irq].status |= sense;
+		break;
+	}
+#endif
+	return 0;
+}
+
+static void adm5120_intc_irq_dispatch(void)
+{
+	unsigned long status;
+	int irq;
+
+#if 1
+	/* dispatch only one IRQ at a time */
+	status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
+
+	if (status) {
+		irq = ADM5120_INTC_IRQ_BASE+fls(status)-1;
+		do_IRQ(irq);
+	} else
+		spurious_interrupt();
+#else
+	status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
+	if (status) {
+		for (irq=ADM5120_INTC_IRQ_BASE; irq <= ADM5120_INTC_IRQ_BASE +
+			INTC_IRQ_LAST;	irq++, status >>=1) {
+			if ((status & 1) == 1)
+				do_IRQ(irq);
+		}
+	} else
+		spurious_interrupt();
+#endif
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned long pending;
+
+	pending = read_c0_status() & read_c0_cause();
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(ADM5120_IRQ_COUNTER);
+	else if (pending & STATUSF_IP2)
+		adm5120_intc_irq_dispatch();
+	else
+		spurious_interrupt();
+}
+
+#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
+static void __init adm5120_intc_irq_init(int base)
+{
+	int i;
+
+	/* disable all interrupts */
+	INTC_REG(INTC_REG_IRQ_DISABLE) = INTC_INT_ALL;
+	/* setup all interrupts to generate IRQ instead of FIQ */
+	INTC_REG(INTC_REG_INT_MODE) = 0;
+	/* set active level for all external interrupts to HIGH */
+	INTC_REG(INTC_REG_INT_LEVEL) = 0;
+	/* disable usage of the TEST_SOURCE register */
+	INTC_REG(INTC_REG_IRQ_SOURCE_SELECT) = 0;
+
+	for(i=ADM5120_INTC_IRQ_BASE; i <= ADM5120_INTC_IRQ_BASE+INTC_IRQ_LAST;
+		i++) {
+		irq_desc[i].status = INTC_IRQ_STATUS;
+		set_irq_chip_and_handler(i, &adm5120_intc_irq_chip, 
+			handle_level_irq);
+	}
+
+	setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
+}
+
+void __init arch_init_irq(void) {
+	mips_cpu_irq_init();
+	adm5120_intc_irq_init(ADM5120_INTC_IRQ_BASE);
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/memory.c b/target/linux/adm5120/files/arch/mips/adm5120/memory.c
new file mode 100644
index 0000000000..1bde6b02d5
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/memory.c
@@ -0,0 +1,179 @@
+/*
+ *  $Id$
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_mpmc.h>
+
+#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+
+#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+
+#if 1
+#  define mem_dbg(f, a...)	printk("mem_detect: " f, ## a)
+#else
+#  define mem_dbg(f, a...)
+#endif
+
+#define MEM_WR_DELAY	10000 /* 0.01 usec */
+
+unsigned long adm5120_memsize;
+
+static int __init mem_check_pattern(u8 *addr, unsigned long offs)
+{
+	volatile u32 *p1 = (volatile u32 *)addr;
+	volatile u32 *p2 = (volatile u32 *)(addr+offs);
+	u32 t,u,v;
+
+	/* save original value */
+	t = *p1;
+	u = *p2;
+
+	if (t != u)
+		return 0;
+
+	v = 0x55555555;
+	if (u == v)
+		v = 0xAAAAAAAA;
+
+	mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1);
+
+	*p1 = v;
+	mem_dbg("delay %d ns\n", MEM_WR_DELAY);
+	adm5120_ndelay(MEM_WR_DELAY);
+	u = *p2;
+
+	mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u);
+
+	/* restore original value */
+	*p1 = t;
+
+	return (v == u);
+}
+
+static void __init adm5120_detect_memsize(void)
+{
+	u32	memctrl;
+	u32	size, maxsize;
+	u8	*p;
+
+	memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL);
+	switch (memctrl & MEMCTRL_SDRS_MASK) {
+	case MEMCTRL_SDRS_4M:
+		maxsize = 4 << 20;
+		break;
+	case MEMCTRL_SDRS_8M:
+		maxsize = 8 << 20;
+		break;
+	case MEMCTRL_SDRS_16M:
+		maxsize = 16 << 20;
+		break;
+	default:
+		maxsize = 64 << 20;
+		break;
+	}
+
+	/* disable buffers for both SDRAM banks */
+	mem_dbg("disable buffers for both banks\n");
+	MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) & ~DC_BE);
+	MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) & ~DC_BE);
+
+	mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20);
+
+	/* detect size of the 1st SDRAM bank */
+	p = (u8 *)KSEG1ADDR(0);
+	for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
+		if (mem_check_pattern(p, size)) {
+			/* mirrored address */
+			mem_dbg("mirrored data found at offset 0x%08X\n", size);
+			break;
+		}
+	}
+
+	mem_dbg("chip size in 1st bank is %uMB\n", size >> 20);
+	adm5120_memsize = size;
+
+	if (size != maxsize)
+		/* 2nd bank is not supported */
+		goto out;
+
+	if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
+		/* 2nd bank is disabled */
+		goto out;
+
+	/*
+	 * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
+	 * are missing.
+	 */
+	mem_dbg("check presence of 2nd bank\n");
+
+	p = (u8 *)KSEG1ADDR(maxsize+size-4);
+	if (mem_check_pattern(p, 0)) {
+		adm5120_memsize += size;
+	}
+
+	if (maxsize != size) {
+		/* adjusting MECTRL register */
+		memctrl &= ~(MEMCTRL_SDRS_MASK);
+		switch (size>>20) {
+		case 4:
+			memctrl |= MEMCTRL_SDRS_4M;
+			break;
+		case 8:
+			memctrl |= MEMCTRL_SDRS_8M;
+			break;
+		case 16:
+			memctrl |= MEMCTRL_SDRS_16M;
+			break;
+		default:
+			memctrl |= MEMCTRL_SDRS_64M;
+			break;
+		}
+		SWITCH_WRITE(SWITCH_REG_MEMCTRL, memctrl);
+	}
+
+out:
+	/* reenable buffer for both SDRAM banks */
+	mem_dbg("enable buffers for both banks\n");
+	MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) | DC_BE);
+	MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) | DC_BE);
+
+	mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
+		size >>20);
+}
+
+void __init adm5120_mem_init(void)
+{
+	adm5120_detect_memsize();
+	add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/platform.c b/target/linux/adm5120/files/arch/mips/adm5120/platform.c
new file mode 100644
index 0000000000..a79893d540
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/platform.c
@@ -0,0 +1,181 @@
+/*
+ *  $Id$
+ *
+ *  Generic ADM5120 platform devices
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
+		unsigned int mctrl);
+
+#if 1
+/*
+ * TODO:remove global adm5120_eth* variables when the switch driver will be
+ *	converted into a real platform driver
+ */
+unsigned int adm5120_eth_num_ports = 6;
+EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
+
+unsigned char adm5120_eth_macs[6][6] = {
+	{'\00', 'A', 'D', 'M', '\x51', '\x20' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x21' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x22' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x23' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x24' },
+	{'\00', 'A', 'D', 'M', '\x51', '\x25' }
+};
+EXPORT_SYMBOL_GPL(adm5120_eth_macs);
+
+unsigned char adm5120_eth_vlans[6] = {
+	0x41, 0x42, 0x44, 0x48, 0x50, 0x60
+};
+EXPORT_SYMBOL_GPL(adm5120_eth_vlans);
+
+#else
+/* Built-in ethernet switch */
+struct adm5120_switch_platform_data adm5120_switch_data;
+struct platform_device adm5120_switch_device = {
+	.name	= "adm5120-switch",
+	.id	= -1,
+	.dev.platform_data = &adm5120_switch_data,
+};
+#endif
+
+/* PCI Host Controller */
+struct adm5120_pci_platform_data adm5120_pci_data;
+struct platform_device adm5120_pci_device = {
+	.name	= "adm5120-pci",
+	.id	= -1,
+	.dev.platform_data = &adm5120_pci_data,
+};
+
+/* USB Host Controller */
+struct resource adm5120_usbc_resources[] = {
+	[0] = {
+		.start	= ADM5120_USBC_BASE,
+		.end	= ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ADM5120_IRQ_USBC,
+		.end	= ADM5120_IRQ_USBC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device adm5120_usbc_device = {
+	.name		= "adm5120-hcd",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(adm5120_usbc_resources),
+	.resource	= adm5120_usbc_resources,
+};
+
+/* NOR flash 0 */
+struct adm5120_flash_platform_data adm5120_flash0_data;
+struct platform_device adm5120_flash0_device =	{
+	.name	= "adm5120-flash",
+	.id	= 0,
+	.dev.platform_data = &adm5120_flash0_data,
+};
+
+/* NOR flash 1 */
+struct adm5120_flash_platform_data adm5120_flash1_data;
+struct platform_device adm5120_flash1_device =	{
+	.name	= "adm5120-flash",
+	.id	= 1,
+	.dev.platform_data = &adm5120_flash1_data,
+};
+
+/* NAND flash */
+struct resource adm5120_nand_resource[] = {
+	[0] = {
+		.start	= ADM5120_SRAM1_BASE,
+		.end	= ADM5120_SRAM1_BASE+ADM5120_MPMC_SIZE-1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct adm5120_nand_platform_data adm5120_nand_data;
+
+struct platform_device adm5120_nand_device = {
+	.name 		= "adm5120-nand",
+	.id		= -1,
+	.dev.platform_data = &adm5120_nand_data,
+	.num_resources	= ARRAY_SIZE(adm5120_nand_resource),
+	.resource	= adm5120_nand_resource,
+};
+
+/* built-in UARTs */
+struct amba_pl010_data adm5120_uart0_data = {
+	.set_mctrl = adm5120_uart_set_mctrl
+};
+
+struct amba_device adm5120_uart0_device = {
+	.dev		= {
+		.bus_id	= "APB:UART0",
+		.platform_data = &adm5120_uart0_data,
+	},
+	.res		= {
+		.start	= ADM5120_UART0_BASE,
+		.end	= ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { ADM5120_IRQ_UART0, -1 },
+	.periphid	= 0x0041010,
+};
+
+struct amba_pl010_data adm5120_uart1_data = {
+	.set_mctrl = adm5120_uart_set_mctrl
+};
+
+struct amba_device adm5120_uart1_device = {
+	.dev		= {
+		.bus_id	= "APB:UART1",
+		.platform_data = &adm5120_uart1_data,
+	},
+	.res		= {
+		.start	= ADM5120_UART1_BASE,
+		.end	= ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { ADM5120_IRQ_UART1, -1 },
+	.periphid	= 0x0041010,
+};
+
+static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
+		unsigned int mctrl)
+{
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom.c b/target/linux/adm5120/files/arch/mips/adm5120/prom.c
new file mode 100644
index 0000000000..2187477d02
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/prom.c
@@ -0,0 +1,276 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific prom routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_uart.h>
+
+#include <prom/cfe.h>
+#include <prom/generic.h>
+#include <prom/routerboot.h>
+#include <prom/myloader.h>
+#include <prom/zynos.h>
+
+unsigned int adm5120_prom_type	= ADM5120_PROM_GENERIC;
+
+struct board_desc {
+	unsigned long	mach_type;
+	char		*name;
+};
+
+#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)}
+static struct board_desc common_boards[] __initdata = {
+	/* Cellvision/SparkLAN boards */
+	DEFBOARD("CAS-630",		MACH_ADM5120_CAS630),
+	DEFBOARD("CAS-670",		MACH_ADM5120_CAS670),
+	DEFBOARD("CAS-771",		MACH_ADM5120_CAS771),
+	DEFBOARD("CAS-790",		MACH_ADM5120_CAS790),
+	DEFBOARD("CAS-861",		MACH_ADM5120_CAS861),
+	/* Compex boards */
+	DEFBOARD("WP54G-WRT",		MACH_ADM5120_WP54G_WRT),
+	/* Edimax boards */
+	DEFBOARD("BR-6104K",		MACH_ADM5120_BR6104K),
+	DEFBOARD("BR-6104KP",		MACH_ADM5120_BR6104K),
+	/* Infineon boards */
+	DEFBOARD("EASY 5120P-ATA",	MACH_ADM5120_EASY5120PATA),
+	DEFBOARD("EASY 5120-RT",	MACH_ADM5120_EASY5120RT),
+	DEFBOARD("EASY 5120-WVoIP",	MACH_ADM5120_EASY5120WVOIP),
+	DEFBOARD("EASY 83000",		MACH_ADM5120_EASY83000),
+	/* Mikrotik RouterBOARDs */
+	DEFBOARD("111",			MACH_ADM5120_RB_111),
+	DEFBOARD("112",			MACH_ADM5120_RB_112),
+	DEFBOARD("133",			MACH_ADM5120_RB_133),
+	DEFBOARD("133C",		MACH_ADM5120_RB_133C),
+	DEFBOARD("133C3",		MACH_ADM5120_RB_133C),
+	DEFBOARD("150",			MACH_ADM5120_RB_153), /* it's intentional */
+	DEFBOARD("153",			MACH_ADM5120_RB_153),
+	DEFBOARD("miniROUTER",		MACH_ADM5120_RB_150),
+};
+
+static unsigned long __init find_machtype_byname(char *name)
+{
+	unsigned long ret;
+	int i;
+
+	ret = MACH_ADM5120_GENERIC;
+	if (name == NULL)
+		goto out;
+
+	if (*name == '\0')
+		goto out;
+
+	for (i=0; i<ARRAY_SIZE(common_boards); i++) {
+		if (strcmp(common_boards[i].name, name) == 0) {
+			ret = common_boards[i].mach_type;
+			break;
+		}
+	}
+
+out:
+	return ret;
+}
+
+static unsigned long __init detect_machtype_routerboot(void)
+{
+	char *name;
+
+	name = routerboot_get_boardname();
+	return find_machtype_byname(name);
+}
+
+static unsigned long __init detect_machtype_generic(void)
+{
+	char *name;
+
+	name = generic_prom_getenv("board_name");
+	return find_machtype_byname(name);
+}
+
+unsigned long __init detect_machtype_cfe(void)
+{
+	char *name;
+
+	name = cfe_getenv("BOARD_NAME");
+	return find_machtype_byname(name);
+}
+
+static struct {
+	unsigned long	mach_type;
+	u16		vendor_id;
+	u16		board_id;
+} zynos_boards[] __initdata = {
+#define ZYNOS_BOARD(vi, bi, mt) { .vendor_id = (vi), .board_id = (bi), \
+		.mach_type = (mt) }
+
+#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
+#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
+#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
+	ZYXEL_BOARD(ZYNOS_BOARD_HS100,	MACH_ADM5120_HS100),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334,	MACH_ADM5120_P334),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334U,	MACH_ADM5120_P334U),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334W,	MACH_ADM5120_P334W),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334WH,	MACH_ADM5120_P334WH),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
+	ZYXEL_BOARD(ZYNOS_BOARD_P334WT,	MACH_ADM5120_P334WT),
+	ZYXEL_BOARD(ZYNOS_BOARD_P335,	MACH_ADM5120_P335),
+	ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
+	ZYXEL_BOARD(ZYNOS_BOARD_P335U,	MACH_ADM5120_P335U)
+};
+
+static unsigned long __init detect_machtype_bootbase(void)
+{
+	unsigned long ret;
+	int i;
+
+	ret = MACH_ADM5120_GENERIC;
+	for (i=0; i<ARRAY_SIZE(zynos_boards); i++) {
+		if (zynos_boards[i].vendor_id == bootbase_info.vendor_id &&
+			zynos_boards[i].board_id == bootbase_info.board_id) {
+			ret = zynos_boards[i].mach_type;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static struct {
+	unsigned long	mach_type;
+	u16	vid;
+	u16	did;
+	u16	svid;
+	u16	sdid;
+} mylo_boards[]  __initdata = {
+#define MYLO_BOARD(v,d,sv,sd,mt) { .vid = (v), .did = (d), .svid = (sv), \
+	.sdid = (sd), .mach_type = (mt) }
+#define COMPEX_BOARD(d,mt) MYLO_BOARD(VENID_COMPEX,(d),VENID_COMPEX,(d),(mt))
+
+	COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
+	COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
+	COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
+	COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54G),
+	COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
+	COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54AG),
+	COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WPP54G),
+	COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WPP54AG),
+};
+
+static unsigned long __init detect_machtype_myloader(void)
+{
+	unsigned long ret;
+	int i;
+
+	ret = MACH_ADM5120_GENERIC;
+	for (i=0; i<ARRAY_SIZE(mylo_boards); i++) {
+		if (mylo_boards[i].vid == myloader_info.vid &&
+			mylo_boards[i].did == myloader_info.did &&
+			mylo_boards[i].svid == myloader_info.svid &&
+			mylo_boards[i].sdid == myloader_info.sdid) {
+			ret = mylo_boards[i].mach_type;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static void __init prom_detect_machtype(void)
+{
+	if (bootbase_present()) {
+		adm5120_prom_type = ADM5120_PROM_BOOTBASE;
+		mips_machtype = detect_machtype_bootbase();
+		return;
+	}
+
+	if (cfe_present()) {
+		adm5120_prom_type = ADM5120_PROM_CFE;
+		mips_machtype = detect_machtype_cfe();
+		return;
+	}
+
+	if (myloader_present()) {
+		adm5120_prom_type = ADM5120_PROM_MYLOADER;
+		mips_machtype = detect_machtype_myloader();
+		return;
+	}
+
+	if (routerboot_present()) {
+		adm5120_prom_type = ADM5120_PROM_ROUTERBOOT;
+		mips_machtype = detect_machtype_routerboot();
+		return;
+	}
+
+	if (generic_prom_present()) {
+		adm5120_prom_type = ADM5120_PROM_GENERIC;
+		mips_machtype = detect_machtype_generic();
+		return;
+	}
+
+	mips_machtype = MACH_ADM5120_GENERIC;
+}
+
+/* TODO: this is an ugly hack for RouterBOARDS */
+extern char _image_cmdline;
+static void __init prom_init_cmdline(void)
+{
+	char *cmd;
+
+	/* init command line, register a default kernel command line */
+	cmd = &_image_cmdline + 8;
+	if( strlen(cmd) > 0) strcpy( &(arcs_cmdline[0]), cmd);
+		else strcpy(&(arcs_cmdline[0]), CONFIG_CMDLINE);
+
+}
+
+#define UART_READ(r) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))
+#define UART_WRITE(r,v) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))=(v)
+
+void __init prom_putchar(char ch)
+{
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+	UART_WRITE(UART_REG_DATA, ch);
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+}
+
+void __init prom_init(void)
+{
+	mips_machgroup = MACH_GROUP_ADM5120;
+	prom_detect_machtype();
+
+	prom_init_cmdline();
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* We do not have to prom memory to free */
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile
new file mode 100644
index 0000000000..d844b600f3
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
+#
+
+lib-y	+= bootbase.o
+lib-y	+= cfe.o
+lib-y	+= generic.o
+lib-y	+= myloader.o
+lib-y	+= routerboot.o
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c
new file mode 100644
index 0000000000..7ab9d46bd6
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c
@@ -0,0 +1,124 @@
+/*
+ *  $Id$
+ *
+ *  ZyXEL's Bootbase specific prom routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <adm5120_defs.h>
+#include <prom/zynos.h>
+#include "prom_read.h"
+
+#define ZYNOS_INFO_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
+#define ZYNOS_HDBG_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
+#define BOOTEXT_ADDR_MIN	KSEG1ADDR(ADM5120_SRAM0_BASE)
+#define BOOTEXT_ADDR_MAX	(BOOTEXT_ADDR_MIN + (2*1024*1024))
+
+static int bootbase_found = 0;
+static struct zynos_board_info *board_info;
+
+struct bootbase_info bootbase_info;
+
+static inline int bootbase_dbgarea_present(u8 *data)
+{
+	u32 t;
+
+	t = prom_read_be32(data+5);
+	if (t != ZYNOS_MAGIC_DBGAREA1)
+		return 0;
+
+	t = prom_read_be32(data+9);
+	if (t != ZYNOS_MAGIC_DBGAREA2)
+		return 0;
+
+	return 1;
+}
+
+static inline u32 bootbase_get_bootext_addr(void)
+{
+	return prom_read_be32(&board_info->bootext_addr);
+}
+
+static inline u16 bootbase_get_vendor_id(void)
+{
+#define CHECK_VENDOR(n) (strnicmp(board_info->vendor,(n),strlen(n)) == 0)
+	unsigned char vendor[ZYNOS_NAME_LEN];
+	int i;
+
+	for (i=0; i<ZYNOS_NAME_LEN; i++)
+		vendor[i]=board_info->vendor[i];
+
+	if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
+		return ZYNOS_VENDOR_ID_ZYXEL;
+
+	if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
+		return ZYNOS_VENDOR_ID_DLINK;
+
+	if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
+		return ZYNOS_VENDOR_ID_LUCENT;
+
+	if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
+		return ZYNOS_VENDOR_ID_NETGEAR;
+
+	return ZYNOS_VENDOR_ID_OTHER;
+}
+
+static inline u16 bootbase_get_board_id(void)
+{
+	return prom_read_be16(&board_info->board_id);
+}
+
+int __init bootbase_present(void)
+{
+	u32	t;
+
+	if (bootbase_found)
+		goto out;
+
+	/* check presence of the dbgarea */
+	if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
+		goto out;
+
+	board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
+
+	/* check for a valid BootExt address */
+	t = bootbase_get_bootext_addr();
+	if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
+		goto out;
+
+	bootbase_info.vendor_id = bootbase_get_vendor_id();
+	bootbase_info.board_id = bootbase_get_board_id();
+
+	bootbase_found = 1;
+
+out:
+	return bootbase_found;
+}
+
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c
new file mode 100644
index 0000000000..6c03a4e859
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c
@@ -0,0 +1,86 @@
+/*
+ *  $Id$
+ *
+ *  Broadcom's CFE specific prom routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <prom/cfe.h>
+#include "prom_read.h"
+
+/*
+ * CFE based boards
+ */
+#define CFE_EPTSEAL	0x43464531 /* CFE1 is the magic number to recognize CFE
+from other bootloaders */
+
+static int cfe_found = 0;
+
+static u32 cfe_handle;
+static u32 cfe_entry;
+static u32 cfe_seal;
+
+int __init cfe_present(void)
+{
+	/*
+	 * This method only works, when we are booted directly from the CFE.
+	 */
+	u32 a1 = (u32) fw_arg1;
+
+	if (cfe_found)
+		return 1;
+
+	cfe_handle = (u32) fw_arg0;
+	cfe_entry = (u32) fw_arg2;
+	cfe_seal = (u32) fw_arg3;
+
+	/* Check for CFE by finding the CFE magic number */
+	if (cfe_seal != CFE_EPTSEAL) {
+		/* We are not booted from CFE */
+		return 0;
+	}
+
+	/* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
+	if (a1 != 0) {
+		return 0;
+	}
+
+	/* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+	if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) {
+		return 0;
+	}
+
+	cfe_found = 1;
+	return 1;
+}
+
+char *cfe_getenv(char *envname)
+{
+	if (cfe_found == 0)
+		return NULL;
+
+	return NULL;
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c
new file mode 100644
index 0000000000..3b5c3bdc09
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c
@@ -0,0 +1,60 @@
+/*
+ *  $Id$
+ *
+ *  Generic PROM routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+#include <prom/generic.h>
+
+static int *_prom_argc;
+static char **_prom_argv;
+static char **_prom_envp;
+
+char *generic_prom_getenv(char *envname)
+{
+	char **env;
+	char *ret;
+
+	ret = NULL;
+	for (env = _prom_envp; *env != NULL; env++) {
+		if (strcmp(envname, *env++) == 0) {
+			ret = *env;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+int generic_prom_present(void)
+{
+	_prom_argc = (int *)fw_arg0;
+	_prom_argv = (char **)fw_arg1;
+	_prom_envp = (char **)fw_arg2;
+
+	return 1;
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c
new file mode 100644
index 0000000000..8a44509a08
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c
@@ -0,0 +1,75 @@
+/*
+ *  $Id$
+ *
+ *  Compex's MyLoader specific prom routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <adm5120_defs.h>
+#include <prom/myloader.h>
+#include "prom_read.h"
+
+#define SYS_PARAMS_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
+#define BOARD_PARAMS_ADDR	KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
+#define PART_TABLE_ADDR		KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
+
+static int myloader_found = 0;
+
+struct myloader_info myloader_info;
+
+int __init myloader_present(void)
+{
+	struct mylo_system_params *sysp;
+	struct mylo_board_params *boardp;
+	struct mylo_partition_table *parts;
+
+	if (myloader_found)
+		goto out;
+
+	sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
+	boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
+	parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
+
+	/* Check for some magic numbers */
+	if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
+	   (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
+	   (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
+		goto out;
+
+	myloader_info.vid = le32_to_cpu(sysp->vid);
+	myloader_info.did = le32_to_cpu(sysp->did);
+	myloader_info.svid = le32_to_cpu(sysp->svid);
+	myloader_info.sdid = le32_to_cpu(sysp->sdid);
+
+	myloader_found = 1;
+
+out:
+	return myloader_found;
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h
new file mode 100644
index 0000000000..06e6863fea
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h
@@ -0,0 +1,63 @@
+/*
+ *  $Id$
+ *
+ *  Generic prom definitions
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_PROM_H_
+#define _ADM5120_PROM_H_
+
+/*
+ * Helper routines
+ */
+static inline u16 prom_read_le16(void *buf)
+{
+	u8 *p = buf;
+
+	return ((u16)p[0] + ((u16)p[1] << 8));
+}
+
+static inline u32 prom_read_le32(void *buf)
+{
+	u8 *p = buf;
+
+	return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
+		((u32)p[3] << 24));
+}
+
+static inline u16 prom_read_be16(void *buf)
+{
+	u8 *p = buf;
+
+	return (((u16)p[0] << 8) + (u16)p[1]);
+}
+
+static inline u32 prom_read_be32(void *buf)
+{
+	u8 *p = buf;
+
+	return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
+		((u32)p[3]));
+}
+
+#endif /* _ADM5120_PROM_H_ */
+
+
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c
new file mode 100644
index 0000000000..7116f412f5
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c
@@ -0,0 +1,142 @@
+/*
+ *  $Id$
+ *
+ *  Mikrotik's RouterBOOT specific prom routines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <adm5120_defs.h>
+#include <prom/routerboot.h>
+#include "prom_read.h"
+
+static struct rb_hard_settings rb_hs;
+static int rb_found = 0;
+
+static int __init routerboot_load_hs(u8 *buf, u16 buflen)
+{
+	u16 id,len;
+	u8 *mac;
+	int i,j;
+
+	memset(&rb_hs, 0, sizeof(rb_hs));
+
+	if (buflen < 4)
+		return -1;
+
+	if (prom_read_le32(buf) != RB_MAGIC_HARD)
+		return -1;
+
+	/* skip magic value */
+	buf += 4;
+	buflen -= 4;
+
+	while (buflen > 2) {
+		id = prom_read_le16(buf);
+		buf += 2;
+		buflen -= 2;
+		if (id == RB_ID_TERMINATOR || buflen < 2)
+			break;
+
+		len = prom_read_le16(buf);
+		buf += 2;
+		buflen -= 2;
+
+		if (buflen < len)
+			break;
+
+		switch (id) {
+		case RB_ID_BIOS_VERSION:
+			rb_hs.bios_ver = (char *)buf;
+			break;
+		case RB_ID_BOARD_NAME:
+			rb_hs.name = (char *)buf;
+			break;
+		case RB_ID_MEMORY_SIZE:
+			rb_hs.mem_size = prom_read_le32(buf);
+			break;
+		case RB_ID_MAC_ADDRESS_COUNT:
+			rb_hs.mac_count = prom_read_le32(buf);
+			break;
+		case RB_ID_MAC_ADDRESS_PACK:
+			rb_hs.mac_count = len/RB_MAC_SIZE;
+			if (rb_hs.mac_count > RB_MAX_MAC_COUNT)
+				rb_hs.mac_count = RB_MAX_MAC_COUNT;
+			mac = buf;
+			for (i=0; i < rb_hs.mac_count; i++) {
+				for (j=0; j < RB_MAC_SIZE; j++)
+					rb_hs.macs[i][j] = mac[j];
+				mac += RB_MAC_SIZE;
+			}
+			break;
+		}
+
+		buf += len;
+		buflen -= len;
+
+	}
+
+	return 0;
+}
+
+#define RB_BS_OFFS	0x14
+#define RB_OFFS_MAX	(128*1024)
+
+int __init routerboot_present(void)
+{
+	struct rb_bios_settings	*bs;
+	u8 *base;
+	u32 off,len;
+
+	if (rb_found)
+		goto out;
+
+	base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
+	bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
+
+	off = prom_read_le32(&bs->hs_offs);
+	len = prom_read_le32(&bs->hs_size);
+	if (off > RB_OFFS_MAX)
+		goto out;
+
+	if (routerboot_load_hs(base+off, len) != 0)
+		goto out;
+
+	rb_found = 1;
+
+out:
+	return rb_found;
+}
+
+char *routerboot_get_boardname(void)
+{
+	if (rb_found == 0)
+		return NULL;
+
+	return rb_hs.name;
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/reset.c b/target/linux/adm5120/files/arch/mips/adm5120/reset.c
new file mode 100644
index 0000000000..abcbb1c8b9
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/reset.c
@@ -0,0 +1,62 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific reset routines
+ *
+ *  Copyright (C) ADMtek Incorporated.
+ *  Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+#define ADM5120_SOFTRESET	0x12000004
+
+void (*adm5120_board_reset)(void);
+
+void adm5120_restart(char *command)
+{
+	/* TODO: stop switch before reset */
+
+	if (adm5120_board_reset)
+		adm5120_board_reset();
+
+	*(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1;
+}
+
+void adm5120_halt(void)
+{
+        printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+        while (1);
+}
+
+void adm5120_power_off(void)
+{
+        adm5120_halt();
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/setup.c b/target/linux/adm5120/files/arch/mips/adm5120/setup.c
new file mode 100644
index 0000000000..ed7966b41a
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/setup.c
@@ -0,0 +1,73 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific setup
+ *
+ *  Copyright (C) ADMtek Incorporated.
+ *  Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_board.h>
+
+static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
+	[ADM5120_PROM_GENERIC]		= "Generic",
+	[ADM5120_PROM_CFE]		= "CFE",
+	[ADM5120_PROM_UBOOT]		= "U-Boot",
+	[ADM5120_PROM_MYLOADER]		= "MyLoader",
+	[ADM5120_PROM_ROUTERBOOT]	= "RouterBOOT",
+	[ADM5120_PROM_BOOTBASE]		= "Bootbase"
+};
+
+static void __init adm5120_report(void)
+{
+	printk(KERN_INFO "SoC      : ADM%04X%s revision %d, running at %ldMHz\n",
+		adm5120_product_code,
+		(adm5120_package == ADM5120_PACKAGE_BGA) ? "" : "P",
+		adm5120_revision, (adm5120_speed / 1000000)
+		);
+	printk(KERN_INFO "Bootdev  : %s flash\n", adm5120_nand_boot ? "NAND":"NOR");
+	printk(KERN_INFO "Prom     : %s\n", prom_names[adm5120_prom_type]);
+}
+
+void __init plat_mem_setup(void)
+{
+	adm5120_soc_init();
+	adm5120_mem_init();
+	adm5120_report();
+
+	board_time_init = adm5120_time_init;
+
+	_machine_restart = adm5120_restart;
+	_machine_halt = adm5120_halt;
+	pm_power_off = adm5120_power_off;
+
+	set_io_port_base(KSEG1);
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/time.c b/target/linux/adm5120/files/arch/mips/adm5120/time.c
new file mode 100644
index 0000000000..27393d4fe2
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/time.c
@@ -0,0 +1,54 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific hooks for MIPS CPU Counter/Compare timer
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was based on: arch/mips/gt64120/wrppmc/time.c
+ *	Original author: Mark.Zhan
+ *	Copyright (C) 1996, 1997, 2004 by Ralf Baechle
+ *	Copyright (C) 2006, Wind River System Inc.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+
+#include <asm/irq.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+void __init adm5120_time_init(void)
+{
+	mips_hpt_frequency = adm5120_speed / 2;
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+	clear_c0_status(ST0_BEV);
+
+	/* Install ISR for CPU Counter interrupt */
+	setup_irq(ADM5120_IRQ_COUNTER, irq);
+}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/trxsplit.c b/target/linux/adm5120/files/arch/mips/adm5120/trxsplit.c
new file mode 100644
index 0000000000..941f306950
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/adm5120/trxsplit.c
@@ -0,0 +1,208 @@
+/*
+ *  $Id$
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/kmod.h>
+#include <linux/root_dev.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/byteorder/generic.h>
+
+#define PFX	"trxsplit: "
+
+#define TRX_MAGIC	0x30524448	/* "HDR0" */
+#define TRX_VERSION	1
+#define TRX_MAX_LEN	0x3A0000
+#define TRX_NO_HEADER	1		/* Do not write TRX header */
+#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET	3
+#define TRX_MIN_KERNEL_SIZE	256*1024
+
+struct trx_header {
+	u32 magic;		/* "HDR0" */
+	u32 len;		/* Length of file including header */
+	u32 crc32;		/* 32-bit CRC from flag_version to end of file */
+	u32 flag_version;	/* 0:15 flags, 16:31 version */
+	u32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
+};
+
+#define BLOCK_LEN_MIN		0x10000
+
+static struct mtd_info *trx_mtd = NULL;
+static unsigned long trx_offset = 0;
+static int trx_nr_parts = 0;
+static struct mtd_partition trx_parts[TRX_MAX_OFFSET];
+static struct trx_header trx_hdr;
+
+static int __init trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset)
+{
+	size_t retlen;
+	int err;
+
+	err = mtd->read(mtd, offset, sizeof(trx_hdr), &retlen, (void *)&trx_hdr);
+	if (err) {
+		printk(KERN_ALERT PFX "unable to read from '%s'\n", mtd->name);
+		goto err_out;
+	}
+
+	if (retlen != sizeof(trx_hdr)) {
+		printk(KERN_ALERT PFX "reading failed on '%s'\n", mtd->name);
+		goto err_out;
+	}
+
+	trx_hdr.magic = le32_to_cpu(trx_hdr.magic);
+	trx_hdr.len = le32_to_cpu(trx_hdr.len);
+	trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32);
+	trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version);
+	trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]);
+	trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]);
+	trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]);
+
+	/* sanity checks */
+	if (trx_hdr.magic != TRX_MAGIC)
+		goto err_out;
+
+	if (trx_hdr.len > mtd->size - offset)
+		goto err_out;
+
+	/* TODO: add crc32 checking too? */
+
+	return 0;
+
+err_out:
+	return -1;
+}
+
+static int __init trxsplit_create_partitions(void)
+{
+	struct mtd_partition *part = trx_parts;
+	int ret = 0;
+	int i;
+
+	if (trx_mtd == NULL)
+		goto out;
+
+	printk(KERN_INFO PFX "creating TRX partitions in '%s' (%d,%d)\n",
+		trx_mtd->name, MTD_BLOCK_MAJOR, trx_mtd->index);
+
+	for (i=0; i<TRX_MAX_OFFSET;i++) {
+		part = &trx_parts[i];
+		if (trx_hdr.offsets[i] == 0)
+			continue;
+		part->offset = trx_offset + trx_hdr.offsets[i];
+		trx_nr_parts++;
+	}
+
+	for (i=0; i<trx_nr_parts-1; i++) {
+		trx_parts[i].size = trx_parts[i+1].offset - trx_parts[i].offset;
+	}
+	trx_parts[i].size = trx_mtd->size - trx_parts[i].offset;
+
+	i=0;
+	part = &trx_parts[i];
+	if (part->size < TRX_MIN_KERNEL_SIZE) {
+		part->name = "loader";
+		i++;
+	}
+
+	part = &trx_parts[i];
+	part->name = "kernel";
+	i++;
+
+	part = &trx_parts[i];
+	part->name = "rootfs";
+
+	ret = add_mtd_partitions(trx_mtd, trx_parts, trx_nr_parts);
+	if (ret) {
+		printk(KERN_ALERT PFX "creating TRX partitions failed\n");
+	}
+
+out:
+	return ret;
+}
+
+static void __init trxsplit_add_mtd(struct mtd_info *mtd)
+{
+	unsigned long offset;
+	unsigned long blocklen;
+	int err;
+
+	if (trx_mtd)
+		return;
+
+	blocklen = mtd->erasesize;
+	if (blocklen < BLOCK_LEN_MIN)
+		blocklen = BLOCK_LEN_MIN;
+
+	printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name);
+
+	err = 0;
+	for (offset=0; offset < mtd->size; offset+=blocklen) {
+		err = trxsplit_checktrx(mtd, offset);
+		if (err == 0)
+			break;
+	}
+
+	if (err) {
+		printk(KERN_ALERT PFX "no TRX header found\n");
+		return;
+	}
+
+	printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset);
+
+	trx_mtd = mtd;
+	trx_offset = offset;
+}
+
+static void __init trxsplit_remove_mtd(struct mtd_info *mtd)
+{
+	/* nothing to do */
+}
+
+static struct mtd_notifier trxsplit_notifier __initdata = {
+	.add	= trxsplit_add_mtd,
+	.remove	= trxsplit_remove_mtd,
+};
+
+static void __init trxsplit_find_trx(void)
+{
+	register_mtd_user(&trxsplit_notifier);
+	unregister_mtd_user(&trxsplit_notifier);
+}
+
+static int __init trxsplit_init(void)
+{
+	int ret;
+
+	trxsplit_find_trx();
+
+	ret = trxsplit_create_partitions();
+	return ret;
+}
+
+late_initcall(trxsplit_init);
diff --git a/target/linux/adm5120/files/arch/mips/pci/fixup-adm5120.c b/target/linux/adm5120/files/arch/mips/pci/fixup-adm5120.c
new file mode 100644
index 0000000000..59acf75c18
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/pci/fixup-adm5120.c
@@ -0,0 +1,175 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific PCI fixups
+ *
+ *  Copyright (C) ADMtek Incorporated.
+ *  Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/pci_regs.h>
+
+#include <asm/delay.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+struct adm5120_pci_irq {
+	u8	slot;
+	u8	func;
+	u8	pin;
+	unsigned irq;
+};
+
+#define PCIIRQ(s,f,p,i) { 	\
+	.slot = (s),		\
+	.func = (f),		\
+	.pin  = (p),		\
+	.irq  = (i)		\
+	}
+
+static struct adm5120_pci_irq default_pci_irqs[] __initdata = {
+	PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+};
+
+static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
+	PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
+	PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
+	PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
+};
+
+static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
+	PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+	PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
+	PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
+};
+
+static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = {
+	PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+	PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0),
+	PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1),
+	PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
+};
+
+#define GETMAP(n) do { 				\
+		nr_irqs = ARRAY_SIZE(n ## _pci_irqs); 	\
+		p = n ## _pci_irqs;			\
+	} while (0)
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct adm5120_pci_irq	*p;
+	int nr_irqs;
+	int i;
+	int irq;
+
+	irq = -1;
+	if (slot < 1 || slot > 3) {
+		printk(KERN_ALERT "PCI: slot number %u is not supported\n",
+			slot);
+		goto out;
+	}
+
+	GETMAP(default);
+
+	switch (mips_machtype) {
+	case MACH_ADM5120_RB_111:
+	case MACH_ADM5120_RB_112:
+	case MACH_ADM5120_RB_133:
+	case MACH_ADM5120_RB_133C:
+	case MACH_ADM5120_RB_153:
+		GETMAP(rb1xx);
+		break;
+	case MACH_ADM5120_NP28G:
+		GETMAP(np28g);
+		break;
+	case MACH_ADM5120_P335:
+	case MACH_ADM5120_P334WT:
+		/* using default mapping */
+		break;
+	case MACH_ADM5120_CAS771:
+		GETMAP(cas771);
+		break;
+
+	case MACH_ADM5120_NP27G:
+	case MACH_ADM5120_NP28GHS:
+	case MACH_ADM5120_WP54AG:
+	case MACH_ADM5120_WP54G:
+	case MACH_ADM5120_WP54G_WRT:
+	case MACH_ADM5120_WPP54AG:
+	case MACH_ADM5120_WPP54G:
+	default:
+		printk(KERN_ALERT "PCI: irq map is unknown, using defaults.\n");
+		break;
+	}
+
+	for (i=0; i<nr_irqs; i++, p++) {
+		if ((p->slot == slot) && (PCI_FUNC(dev->devfn) == p->func) &&
+		    (p->pin == pin)) {
+			irq = p->irq;
+			break;
+		}
+	}
+
+	if (irq < 0) {
+		printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n",
+			pci_name(dev), pin);
+	} else {
+		printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n",
+			pci_name(dev), pin, irq);
+	}
+
+out:
+	return irq;
+}
+
+static void adm5120_pci_fixup(struct pci_dev *dev)
+{
+	if (dev->devfn != 0)
+		return;
+
+	/* setup COMMAND register */
+	pci_write_config_word(dev, PCI_COMMAND,
+		(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
+
+	/* setup CACHE_LINE_SIZE register */
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
+
+	/* setting up BARS */
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120,
+	adm5120_pci_fixup);
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
diff --git a/target/linux/adm5120/files/arch/mips/pci/ops-adm5120.c b/target/linux/adm5120/files/arch/mips/pci/ops-adm5120.c
new file mode 100644
index 0000000000..4a9bc999c9
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/pci/ops-adm5120.c
@@ -0,0 +1,143 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific PCI operations
+ *
+ *  Copyright (C) ADMtek Incorporated.
+ *  Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+
+#define DEBUG	0
+#if DEBUG
+#define DBG(f, ...) printk(f, ## __VA_ARGS__ )
+#else
+#define DBG(f, ...)
+#endif
+
+#define PCI_ENABLE 0x80000000
+
+static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED;
+
+static inline void write_cfgaddr(u32 addr)
+{
+	*(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR) = (addr | PCI_ENABLE);
+}
+
+static inline void write_cfgdata(u32 data)
+{
+	*(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA) = data;
+
+}
+
+static inline u32 read_cfgdata(void)
+{
+	return (*(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA));
+}
+
+static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where)
+{
+	return (((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \
+		(where & 0xFC));
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
+                           int size, u32 *val)
+{
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(&pci_lock, flags);
+	write_cfgaddr(mkaddr(bus,devfn,where));
+	data = read_cfgdata();	
+
+	DBG("PCI: cfg_read  %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, data);
+
+	switch (size) {
+	case 1:
+		if (where & 1)
+			data >>= 8;
+		if (where & 2)
+			data >>= 16;
+		data &= 0xFF;
+		break;
+	case 2:
+		if (where & 2)
+			data >>= 16;
+		data &= 0xFFFF;
+		break;
+	}
+
+	*val = data;
+	DBG(", 0x%08X returned\n", data);
+	spin_unlock_irqrestore(&pci_lock, flags);
+	
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
+                            int size, u32 val)
+{
+	unsigned long flags;
+	u32 data;
+	int s;
+
+	spin_lock_irqsave(&pci_lock, flags);
+	write_cfgaddr(mkaddr(bus,devfn,where));
+	data = read_cfgdata();
+
+	DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, data);
+	    
+	switch (size) {
+	case 1:
+		s = ((where & 3) << 3);
+		data &= ~(0xFF << s);
+		data |= ((val & 0xFF) << s);
+		break;
+	case 2:
+		s = ((where & 2) << 4);
+		data &= ~(0xFFFF << s);
+		data |= ((val & 0xFFFF) << s);
+		break;
+	case 4:
+		data = val;
+		break;
+	}
+
+	write_cfgdata(data);
+	DBG(", 0x%08X written\n", data);
+	spin_unlock_irqrestore(&pci_lock, flags);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops adm5120_pci_ops = {
+	.read	= pci_config_read,
+	.write	= pci_config_write,
+};
diff --git a/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c
new file mode 100644
index 0000000000..2a64770234
--- /dev/null
+++ b/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c
@@ -0,0 +1,80 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 PCI Host Controller driver
+ *
+ *  Copyright (C) ADMtek Incorporated.
+ *  Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+extern struct pci_ops adm5120_pci_ops;
+
+static struct resource pci_io_resource = {
+	.name = "ADM5120 PCI I/O",
+	.start = ADM5120_PCIIO_BASE,
+	.end = ADM5120_PCICFG_ADDR-1,
+	.flags = IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+	.name = "ADM5120 PCI MEM",
+	.start = ADM5120_PCIMEM_BASE,
+	.end = ADM5120_PCIIO_BASE-1,
+	.flags = IORESOURCE_MEM
+};
+
+static struct pci_controller adm5120_controller = {
+	.pci_ops	= &adm5120_pci_ops,
+	.io_resource	= &pci_io_resource,
+	.mem_resource	= &pci_mem_resource,
+};
+
+static int __init adm5120_pci_setup(void)
+{
+	int pci_bios;
+
+	pci_bios = adm5120_has_pci();
+
+	printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no ");
+	if (pci_bios == 0)
+		return -1;
+
+	/* Avoid ISA compat ranges.  */
+	PCIBIOS_MIN_IO = 0x00000000;
+	PCIBIOS_MIN_MEM = 0x00000000;
+
+	/* Set I/O resource limits.  */
+	ioport_resource.end = 0x1fffffff;
+	iomem_resource.end = 0xffffffff;
+
+	register_pci_controller(&adm5120_controller);
+	return 0;
+}
+
+arch_initcall(adm5120_pci_setup);
diff --git a/target/linux/adm5120/files/drivers/leds/leds-adm5120.c b/target/linux/adm5120/files/drivers/leds/leds-adm5120.c
new file mode 100644
index 0000000000..06189371d7
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/leds/leds-adm5120.c
@@ -0,0 +1,361 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 GPIO LED devices
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+
+#include <linux/gpio_leds.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+
+#define NUM_LEDS_MAX	23
+
+#define ADM5120_GPIO_xxxx	0x100	/* an unknown pin */
+
+struct mach_data {
+	unsigned long machtype;
+	unsigned count;
+	struct gpio_led_platform_data *data;
+};
+
+struct adm5120_leddev {
+	struct platform_device pdev;
+	struct gpio_led_platform_data pdata;
+};
+
+static int led_count = 0;
+static struct adm5120_leddev *led_devs[NUM_LEDS_MAX];
+
+#define LED_ARRAY(n)				\
+static struct gpio_led_platform_data		\
+n ## _leds [] __initdata =
+
+#define LED_DATA(n,t,g,off,on) {		\
+	.name = (n),				\
+	.trigger = (t),				\
+	.gpio = (g),				\
+	.value_off = (off),			\
+	.value_on = (on)			\
+	}
+
+#define LED_STD(g,n,t)	LED_DATA((n),(t),(g), 0, 1)
+#define LED_INV(g,n,t)	LED_DATA((n),(t),(g), 1, 0)
+
+/*
+ * Compex boards
+ */
+#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
+LED_ARRAY(np27g) { /* FIXME: untested */
+	LED_STD(ADM5120_GPIO_xxxx, "lan1",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "lan2",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "lan3",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "lan4",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "wan_cond",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "wlan",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "wan_act",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "usb1",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "usb2",	NULL ),
+	LED_INV(ADM5120_GPIO_PIN2, "power",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "diag",	NULL ),
+};
+#endif
+
+#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
+LED_ARRAY(np28g) { /* FIXME: untested */
+	LED_STD(ADM5120_GPIO_xxxx, "lan1",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "lan2",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "lan3",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "wan",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "wlan",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "usb1",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "usb2",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "usb3",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "usb4",	NULL ),
+	LED_INV(ADM5120_GPIO_PIN2, "power",	NULL ),
+	LED_STD(ADM5120_GPIO_xxxx, "diag",	NULL ),
+};
+#endif
+
+LED_ARRAY(wp54g) {
+	LED_INV(ADM5120_GPIO_PIN2, "diag",	NULL ),
+	LED_INV(ADM5120_GPIO_PIN6, "wlan",	NULL ),
+	LED_INV(ADM5120_GPIO_PIN7, "wan",	NULL ),
+	LED_INV(ADM5120_GPIO_P0L0, "lan1",	NULL ),
+	LED_INV(ADM5120_GPIO_P1L0, "lan2",	NULL ),
+};
+
+/*
+ * Edimax boards
+ */
+LED_ARRAY(br6104k) {
+	LED_STD(ADM5120_GPIO_PIN0, "power",		NULL ),
+	LED_INV(ADM5120_GPIO_P0L1, "wan_speed",		NULL ),
+	LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact",	NULL ),
+	LED_INV(ADM5120_GPIO_P1L1, "lan1_speed",	NULL ),
+	LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact",	NULL ),
+	LED_INV(ADM5120_GPIO_P2L1, "lan2_speed",	NULL ),
+	LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact",	NULL ),
+	LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",	NULL ),
+	LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",	NULL ),
+	LED_INV(ADM5120_GPIO_P4L1, "lan4_speed",	NULL ),
+	LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",	NULL ),
+};
+
+/*
+ * Mikrotik boards
+ */
+#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
+LED_ARRAY(rb100) { /* FIXME: untested */
+	LED_STD(ADM5120_GPIO_PIN6, "power",	NULL ),
+	LED_STD(ADM5120_GPIO_PIN3, "user",	NULL ),
+};
+#endif
+
+LED_ARRAY(rb133) {
+	LED_STD(ADM5120_GPIO_PIN6, "power",	NULL ),
+	LED_STD(ADM5120_GPIO_PIN5, "user",	NULL ),
+};
+
+/*
+ * ZyXEL boards
+ */
+#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
+LED_ARRAY(p334) { /* FIXME: untested */
+	LED_INV(ADM5120_GPIO_xxxx, "power",	NULL ),
+	LED_INV(ADM5120_GPIO_xxxx, "lan1",	NULL ),
+	LED_INV(ADM5120_GPIO_xxxx, "lan2",	NULL ),
+	LED_INV(ADM5120_GPIO_xxxx, "lan3",	NULL ),
+	LED_INV(ADM5120_GPIO_xxxx, "lan4",	NULL ),
+	LED_INV(ADM5120_GPIO_xxxx, "wan",	NULL ),
+};
+#endif
+
+LED_ARRAY(p334wt) {
+	LED_INV(ADM5120_GPIO_PIN2, "power",	NULL ),
+	LED_INV(ADM5120_GPIO_P3L0, "lan1",	NULL ),
+	LED_INV(ADM5120_GPIO_P2L0, "lan2",	NULL ),
+	LED_INV(ADM5120_GPIO_P1L0, "lan3",	NULL ),
+	LED_INV(ADM5120_GPIO_P0L0, "lan4",	NULL ),
+	LED_INV(ADM5120_GPIO_P4L0, "wan",	NULL ),
+	LED_INV(ADM5120_GPIO_P4L2, "wlan",	NULL ),
+	LED_INV(ADM5120_GPIO_P2L2, "otist",	NULL ),
+	LED_INV(ADM5120_GPIO_P1L2, "hidden",	NULL ),
+};
+
+#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
+LED_ARRAY(p335) { /* FIXME: untested */
+	LED_INV(ADM5120_GPIO_PIN2, "power",	NULL ),
+	LED_INV(ADM5120_GPIO_P3L0, "lan1",	NULL ),
+	LED_INV(ADM5120_GPIO_P2L0, "lan2",	NULL ),
+	LED_INV(ADM5120_GPIO_P1L0, "lan3",	NULL ),
+	LED_INV(ADM5120_GPIO_P0L0, "lan4",	NULL ),
+	LED_INV(ADM5120_GPIO_P4L0, "wan",	NULL ),
+	LED_INV(ADM5120_GPIO_P4L2, "wlan",	NULL ),
+	LED_INV(ADM5120_GPIO_P2L2, "otist",	NULL ),
+	LED_INV(ADM5120_GPIO_xxxx, "usb",	NULL ),
+};
+#endif
+
+/*
+ * Generic board
+ */
+LED_ARRAY(generic) {
+#if defined(CONFIG_LEDS_ADM5120_DIAG)
+	LED_STD(ADM5120_GPIO_PIN0, "gpio0",	NULL ),
+	LED_STD(ADM5120_GPIO_PIN1, "gpio1",	NULL ),
+	LED_STD(ADM5120_GPIO_PIN2, "gpio2",	NULL ),
+	LED_STD(ADM5120_GPIO_PIN3, "gpio3",	NULL ),
+	LED_STD(ADM5120_GPIO_PIN4, "gpio4",	NULL ),
+	LED_STD(ADM5120_GPIO_PIN5, "gpio5",	NULL ),
+	LED_STD(ADM5120_GPIO_PIN6, "gpio6",	NULL ),
+	LED_STD(ADM5120_GPIO_PIN7, "gpio7",	NULL ),
+	LED_STD(ADM5120_GPIO_P0L0, "port0led0",	NULL ),
+	LED_STD(ADM5120_GPIO_P0L1, "port0led1",	NULL ),
+	LED_STD(ADM5120_GPIO_P0L2, "port0led2",	NULL ),
+	LED_STD(ADM5120_GPIO_P1L0, "port1led0",	NULL ),
+	LED_STD(ADM5120_GPIO_P1L1, "port1led1",	NULL ),
+	LED_STD(ADM5120_GPIO_P1L2, "port1led2",	NULL ),
+	LED_STD(ADM5120_GPIO_P2L0, "port2led0",	NULL ),
+	LED_STD(ADM5120_GPIO_P2L1, "port2led1",	NULL ),
+	LED_STD(ADM5120_GPIO_P2L2, "port2led2",	NULL ),
+	LED_STD(ADM5120_GPIO_P3L0, "port3led0",	NULL ),
+	LED_STD(ADM5120_GPIO_P3L1, "port3led1",	NULL ),
+	LED_STD(ADM5120_GPIO_P3L2, "port3led2",	NULL ),
+	LED_STD(ADM5120_GPIO_P4L0, "port4led0",	NULL ),
+	LED_STD(ADM5120_GPIO_P4L1, "port4led1",	NULL ),
+	LED_STD(ADM5120_GPIO_P4L2, "port4led2",	NULL ),
+#endif
+};
+
+#define MACH_DATA(m, n) {				\
+	.machtype	= (m),				\
+	.count		= ARRAY_SIZE(n ## _leds),	\
+	.data		= n ## _leds			\
+}
+
+static struct mach_data machines[] __initdata = {
+	MACH_DATA(MACH_ADM5120_GENERIC, generic),
+	/* Compex */
+	MACH_DATA(MACH_ADM5120_WP54AG,	wp54g),
+	MACH_DATA(MACH_ADM5120_WP54G,	wp54g),
+	MACH_DATA(MACH_ADM5120_WP54G_WRT, wp54g),
+	MACH_DATA(MACH_ADM5120_WPP54AG,	wp54g),
+	MACH_DATA(MACH_ADM5120_WPP54G,	wp54g),
+	/* Edimax */
+	MACH_DATA(MACH_ADM5120_BR6104K,	br6104k),
+	/* Mikrotik */
+	MACH_DATA(MACH_ADM5120_RB_133,	rb133),
+	MACH_DATA(MACH_ADM5120_RB_133C,	rb133),
+	/* ZyXEL */
+	MACH_DATA(MACH_ADM5120_P334WT,	p334wt),
+#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
+	/* untested */
+	MACH_DATA(MACH_ADM5120_P334,	p334),
+	MACH_DATA(MACH_ADM5120_P335,	p335),
+	MACH_DATA(MACH_ADM5120_RB_111,	rb100),
+	MACH_DATA(MACH_ADM5120_RB_112,	rb100),
+	MACH_DATA(MACH_ADM5120_NP27G,	np27g),
+	MACH_DATA(MACH_ADM5120_NP28G,	np28g),
+	MACH_DATA(MACH_ADM5120_NP28GHS,	np28g),
+#endif
+};
+
+static struct adm5120_leddev * __init
+create_leddev(struct gpio_led_platform_data *data)
+{
+	struct adm5120_leddev *p;
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (p == NULL)
+		return NULL;
+
+	memcpy(&p->pdata, data, sizeof(p->pdata));
+	p->pdev.dev.platform_data = &p->pdata;
+
+	return p;
+}
+
+static void
+destroy_leddev(struct adm5120_leddev *led)
+{
+	if (led)
+		kfree(led);
+}
+
+static struct mach_data * __init
+adm5120_leds_findmach(unsigned long machtype)
+{
+	struct mach_data *mach;
+	int i;
+
+	mach = NULL;
+	for (i=0; i<ARRAY_SIZE(machines); i++) {
+		if (machines[i].machtype == machtype) {
+			mach = &machines[i];
+			break;
+		}
+	};
+
+#if defined(CONFIG_LEDS_ADM5120_DIAG)
+	if (mach == NULL)
+		mach = machines;
+#endif
+
+	return mach;
+}
+
+static int __init
+adm5120_leds_init(void)
+{
+	struct mach_data *mach;
+	int i, ret;
+
+	if (mips_machgroup != MACH_GROUP_ADM5120) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mach = adm5120_leds_findmach(mips_machtype);
+	if (mach == NULL) {
+		/* the board is not yet supported */
+		ret = -EINVAL;
+		goto err;
+	}
+
+	for (i=0; i < mach->count; i++) {
+		led_devs[i] = create_leddev(&mach->data[i]);
+		if (led_devs[i] == NULL) {
+			ret = -ENOMEM;
+			goto err_destroy;
+		}
+		led_devs[i]->pdev.name = "gpio-led";
+		led_devs[i]->pdev.id = i;
+	}
+
+	for (i=0; i < mach->count; i++) {
+		ret = platform_device_register(&led_devs[i]->pdev);
+		if (ret)
+			goto err_unregister;
+	}
+
+	led_count = mach->count;
+	return 0;
+
+err_unregister:
+	for (i--; i>=0; i--)
+		platform_device_unregister(&led_devs[i]->pdev);
+
+err_destroy:
+	for (i=0; i<led_count; i++)
+		destroy_leddev(led_devs[i]);
+err:
+	return ret;
+}
+
+static void __exit
+adm5120_leds_exit(void)
+{
+	int i;
+
+	for (i=0; i < led_count; i++) {
+		platform_device_unregister(&led_devs[i]->pdev);
+		destroy_leddev(led_devs[i]);
+	}
+}
+
+module_init(adm5120_leds_init);
+module_exit(adm5120_leds_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL");
+
diff --git a/target/linux/adm5120/files/drivers/leds/leds-gpio.c b/target/linux/adm5120/files/drivers/leds/leds-gpio.c
new file mode 100755
index 0000000000..b1a1f1ce9a
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/leds/leds-gpio.c
@@ -0,0 +1,212 @@
+/*
+ *  $Id$
+ *
+ *  Driver for LEDs connected to GPIO lines
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was derived from:
+ *    /drivers/led/leds-s3c24xx.c
+ *    (c) 2006 Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+
+#include <linux/gpio_leds.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#define DRV_NAME "gpio-led"
+#define DRV_DESC "GPIO LEDs driver"
+
+struct gpio_led_device {
+	struct led_classdev cdev;
+	struct gpio_led_platform_data *pdata;
+};
+
+static inline struct gpio_led_device *pdev_to_led(struct platform_device *dev)
+{
+	return platform_get_drvdata(dev);
+}
+
+static inline struct gpio_led_device *class_to_led(struct led_classdev *led_cdev)
+{
+	return container_of(led_cdev, struct gpio_led_device, cdev);
+}
+
+static void gpio_led_set(struct led_classdev *led_cdev,
+			    enum led_brightness brightness)
+{
+	struct gpio_led_device *led;
+	struct gpio_led_platform_data *pdata;
+
+	led = class_to_led(led_cdev);
+	pdata = led->pdata;
+
+	switch (brightness) {
+	case LED_FULL:
+		gpio_direction_output(pdata->gpio, pdata->value_on);
+		break;
+	case LED_OFF:
+		gpio_direction_output(pdata->gpio, pdata->value_off);
+		break;
+	default:
+		gpio_direction_output(pdata->gpio, brightness);
+		break;
+	}
+}
+
+static int __devinit gpio_led_probe(struct platform_device *dev)
+{
+	struct gpio_led_platform_data *pdata;
+	struct gpio_led_device *led;
+	int ret;
+
+	pdata = dev->dev.platform_data;
+	if (pdata == NULL) {
+		dev_err(&dev->dev, "no platform data, id=%d\n", dev->id);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (pdata->name == NULL) {
+		dev_err(&dev->dev, "no led name specified\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = gpio_request(pdata->gpio, pdata->name);
+	if (ret) {
+		dev_err(&dev->dev, "gpio_request failed\n");
+		goto err;
+	}
+
+	led = kzalloc(sizeof(*led), GFP_KERNEL);
+	if (led == NULL) {
+		dev_err(&dev->dev, "no memory for device");
+		ret = -ENOMEM;
+		goto err_free_gpio;
+	}
+
+	platform_set_drvdata(dev, led);
+	led->pdata = pdata;
+	led->cdev.name = pdata->name;
+	led->cdev.brightness_set = gpio_led_set;
+#ifdef CONFIG_LEDS_TRIGGERS
+	led->cdev.default_trigger = pdata->trigger;
+#endif
+
+	ret = led_classdev_register(&dev->dev, &led->cdev);
+	if (ret < 0) {
+		dev_err(&dev->dev, "led_classdev_register failed");
+		goto err_free_led;
+	}
+
+	return 0;
+
+err_free_led:
+	kfree(led);
+err_free_gpio:
+	gpio_free(pdata->gpio);
+err:
+	return ret;
+}
+
+static int __devexit gpio_led_remove(struct platform_device *dev)
+{
+	struct gpio_led_device *led;
+	struct gpio_led_platform_data *pdata;
+
+	pdata = dev->dev.platform_data;
+
+	led = pdev_to_led(dev);
+	led_classdev_unregister(&led->cdev);
+	kfree(led);
+
+	gpio_free(pdata->gpio);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int gpio_led_suspend(struct platform_device *dev,
+		pm_message_t state)
+{
+	struct gpio_led_device *led;
+
+	led = pdev_to_led(dev);
+	led_classdev_suspend(&led->cdev);
+
+	return 0;
+}
+
+static int gpio_led_resume(struct platform_device *dev)
+{
+	struct gpio_led_device *led;
+
+	led = pdev_to_led(dev);
+	led_classdev_resume(&led->cdev);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct platform_driver gpio_led_driver = {
+	.probe		= gpio_led_probe,
+	.remove		= __devexit_p(gpio_led_remove),
+#ifdef CONFIG_PM
+	.suspend	= gpio_led_suspend,
+	.resume		= gpio_led_resume,
+#endif
+	.driver		= {
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init gpio_led_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&gpio_led_driver);
+	if (ret)
+		printk(KERN_ALERT DRV_DESC " register failed\n");
+	else
+		printk(KERN_INFO DRV_DESC " registered\n");
+
+	return ret;
+}
+
+static void __exit gpio_led_exit(void)
+{
+	platform_driver_unregister(&gpio_led_driver);
+}
+
+module_init(gpio_led_init);
+module_exit(gpio_led_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL");
diff --git a/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c
new file mode 100644
index 0000000000..0a2590e609
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c
@@ -0,0 +1,574 @@
+/*
+ *  $Id$
+ *
+ *  Platform driver for NOR flash devices on ADM5120 based boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was derived from: drivers/mtd/map/physmap.c
+ *	Copyright (C) 2003 MontaVista Software Inc.
+ *	Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_mpmc.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+#define DRV_NAME	"adm5120-flash"
+#define DRV_DESC	"ADM5120 flash MAP driver"
+#define MAX_PARSED_PARTS 8
+
+#ifdef ADM5120_FLASH_DEBUG
+#define MAP_DBG(m, f, a...)	printk(KERN_INFO "%s: " f, (m->name) , ## a)
+#else
+#define MAP_DBG(m, f, a...)	do {} while (0)
+#endif
+#define MAP_ERR(m, f, a...)	printk(KERN_ERR "%s: " f, (m->name) , ## a)
+#define MAP_INFO(m, f, a...)	printk(KERN_INFO "%s: " f, (m->name) , ## a)
+
+struct adm5120_map_info {
+	struct map_info	map;
+	void 		(*switch_bank)(unsigned);
+	unsigned long	window_size;
+};
+
+struct adm5120_flash_info {
+	struct mtd_info		*mtd;
+	struct resource		*res;
+	struct platform_device	*dev;
+	struct adm5120_map_info	amap;
+#ifdef CONFIG_MTD_PARTITIONS
+	int			nr_parts;
+	struct mtd_partition	*parts[MAX_PARSED_PARTS];
+#endif
+};
+
+struct flash_desc {
+	u32	phys;
+	u32	srs_shift;
+	u32	mpmc_reg;
+};
+
+/*
+ * Globals
+ */
+static DEFINE_SPINLOCK(adm5120_flash_spin);
+#define FLASH_LOCK()	spin_lock(&adm5120_flash_spin)
+#define FLASH_UNLOCK()	spin_unlock(&adm5120_flash_spin)
+
+static u32 flash_bankwidths[4] = { 1, 2, 4, 0 };
+
+static u32 flash_sizes[8] = {
+	0, 512*1024, 1024*1024, 2*1024*1024,
+	4*1024*1024, 0, 0, 0
+};
+
+static struct flash_desc flash_descs[2] = {
+	{
+		.phys		= ADM5120_SRAM0_BASE,
+		.mpmc_reg	= MPMC_REG_SC1,
+		.srs_shift	= MEMCTRL_SRS0_SHIFT,
+	}, {
+		.phys		= ADM5120_SRAM1_BASE,
+		.mpmc_reg	= MPMC_REG_SC0,
+		.srs_shift	= MEMCTRL_SRS1_SHIFT,
+	}
+};
+
+static const char *probe_types[] = {
+	"cfi_probe",
+	"jedec_probe",
+	"map_rom",
+	NULL
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *parse_types[] = {
+	"cmdlinepart",
+#ifdef CONFIG_MTD_REDBOOT_PARTS
+	"RedBoot",
+#endif
+#ifdef CONFIG_MTD_MYLOADER_PARTS
+	"MyLoader",
+#endif
+};
+#endif
+
+#define BANK_SIZE	(2<<20)
+#define BANK_SIZE_MAX	(4<<20)
+#define BANK_OFFS_MASK	(BANK_SIZE-1)
+#define BANK_START_MASK	(~BANK_OFFS_MASK)
+
+static inline struct adm5120_map_info *map_to_amap(struct map_info *map)
+{
+	return (struct adm5120_map_info *)map;
+}
+
+static void adm5120_flash_switchbank(struct map_info *map,
+		unsigned long ofs)
+{
+	struct adm5120_map_info *amap = map_to_amap(map);
+	unsigned bank;
+
+	if (amap->switch_bank == NULL)
+		return;
+
+	bank = (ofs & BANK_START_MASK) >> 21;
+	if (bank > 1)
+		BUG();
+
+	MAP_DBG(map, "switching to bank %u, ofs=%lX\n", bank, ofs);
+	amap->switch_bank(bank);
+}
+
+static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs)
+{
+	struct adm5120_map_info *amap = map_to_amap(map);
+	map_word ret;
+
+	MAP_DBG(map, "reading from ofs %lX\n", ofs);
+
+	if (ofs >= amap->window_size)
+		return map_word_ff(map);
+
+	FLASH_LOCK();
+	adm5120_flash_switchbank(map, ofs);
+	ret = inline_map_read(map, (ofs & (amap->window_size-1)));
+	FLASH_UNLOCK();
+
+	return ret;
+}
+
+static void adm5120_flash_write(struct map_info *map, const map_word datum,
+		unsigned long ofs)
+{
+	struct adm5120_map_info *amap = map_to_amap(map);
+
+	MAP_DBG(map,"writing to ofs %lX\n", ofs);
+
+	if (ofs > amap->window_size)
+		return;
+
+	FLASH_LOCK();
+	adm5120_flash_switchbank(map, ofs);
+	inline_map_write(map, datum, (ofs & (amap->window_size-1)));
+	FLASH_UNLOCK();
+}
+
+static void adm5120_flash_copy_from(struct map_info *map, void *to,
+		unsigned long from, ssize_t len)
+{
+	struct adm5120_map_info *amap = map_to_amap(map);
+	char *p;
+	ssize_t t;
+
+	MAP_DBG(map, "copy_from, to=%lX, from=%lX, len=%lX\n",
+		(unsigned long)to, from, (unsigned long)len);
+
+	if (from > amap->window_size)
+		return;
+
+	p = (char *)to;
+	while (len > 0) {
+		t = len;
+		if ((from < BANK_SIZE) && ((from+len) > BANK_SIZE))
+			t = BANK_SIZE-from;
+
+		FLASH_LOCK();
+		MAP_DBG(map, "copying %lu byte(s) from %lX to %lX\n",
+			(unsigned long)t, (from & (amap->window_size-1)),
+			(unsigned long)p);
+		adm5120_flash_switchbank(map, from);
+		inline_map_copy_from(map, p, (from & (amap->window_size-1)), t);
+		FLASH_UNLOCK();
+		p += t;
+		from += t;
+		len -= t;
+	}
+}
+
+static int adm5120_flash_initres(struct adm5120_flash_info *info)
+{
+	struct map_info *map = &info->amap.map;
+	int err = 0;
+
+	info->res = request_mem_region(map->phys, map->size, map->name);
+	if (info->res == NULL) {
+		MAP_ERR(map, "could not reserve memory region\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	map->virt = ioremap_nocache(map->phys, map->size);
+	if (map->virt == NULL) {
+		MAP_ERR(map, "failed to ioremap flash region\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+out:
+	return err;
+}
+
+#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
+#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
+#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r))
+#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r))=(v)
+
+static int adm5120_flash_initinfo(struct adm5120_flash_info *info,
+		struct platform_device *dev)
+{
+	struct map_info *map = &info->amap.map;
+	struct adm5120_flash_platform_data *pdata = dev->dev.platform_data;
+	struct flash_desc *fdesc;
+	u32 t;
+
+	map->name = dev->dev.bus_id;
+
+	if (dev->id > 1) {
+		MAP_ERR(map, "invalid flash id\n");
+		goto err_out;
+	}
+
+	fdesc = &flash_descs[dev->id];
+
+	/* get memory window size */
+	t = SWITCH_READ(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift;
+	t &= MEMCTRL_SRS_MASK;
+	info->amap.window_size = flash_sizes[t];
+	if (info->amap.window_size == 0) {
+		MAP_ERR(map, "invalid flash size detected\n");
+		goto err_out;
+	}
+
+	/* get flash bus width */
+	t = MPMC_READ(fdesc->mpmc_reg) & SC_MW_MASK;
+	map->bankwidth = flash_bankwidths[t];
+	if (map->bankwidth == 0) {
+		MAP_ERR(map, "invalid bus width detected\n");
+		goto err_out;
+	}
+
+	map->phys = fdesc->phys;
+	map->size = BANK_SIZE_MAX;
+
+	simple_map_init(map);
+	map->read = adm5120_flash_read;
+	map->write = adm5120_flash_write;
+	map->copy_from = adm5120_flash_copy_from;
+
+	if (pdata) {
+		map->set_vpp = pdata->set_vpp;
+		info->amap.switch_bank = pdata->switch_bank;
+	}
+
+	info->dev = dev;
+
+	MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n",
+		(unsigned long)map->phys,
+		(unsigned long)info->amap.window_size >> 10,
+		map->bankwidth*8);
+
+	return 0;
+
+err_out:
+	return -ENODEV;
+}
+
+static void adm5120_flash_initbanks(struct adm5120_flash_info *info)
+{
+	struct map_info *map = &info->amap.map;
+
+	if (info->mtd->size <= BANK_SIZE)
+		/* no bank switching needed */
+		return;
+
+	if (info->amap.switch_bank) {
+		info->amap.window_size = info->mtd->size;
+		return;
+	}
+
+	MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n",
+		(unsigned long)map->size >> 10,
+		(unsigned long)info->mtd->size >> 10);
+
+	info->mtd->size = info->amap.window_size;
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int adm5120_flash_initparts(struct adm5120_flash_info *info)
+{
+	struct adm5120_flash_platform_data *pdata = info->dev->dev.platform_data;
+	struct map_info *map = &info->amap.map;
+	int num_parsers;
+	const char *parser[2];
+	int err = 0;
+	int nr_parts;
+	int i;
+
+	info->nr_parts = 0;
+
+	if (pdata == NULL)
+		goto out;
+
+	if (pdata->nr_parts) {
+		MAP_INFO(map, "adding static partitions\n");
+		err = add_mtd_partitions(info->mtd, pdata->parts,
+			pdata->nr_parts);
+		if (err == 0) {
+			info->nr_parts += pdata->nr_parts;
+			goto out;
+		}
+	}
+
+	num_parsers = ARRAY_SIZE(parse_types);
+	if (num_parsers > MAX_PARSED_PARTS)
+		num_parsers = MAX_PARSED_PARTS;
+
+	parser[1] = NULL;
+	for (i=0; i<num_parsers; i++) {
+		parser[0] = parse_types[i];
+
+		MAP_INFO(map, "parsing \"%s\" partitions\n",
+			parser[0]);
+		nr_parts = parse_mtd_partitions(info->mtd, parser,
+			&info->parts[i], 0);
+
+		if (nr_parts <= 0)
+			continue;
+
+		MAP_INFO(map, "adding \"%s\" partitions\n",
+			parser[0]);
+
+		err = add_mtd_partitions(info->mtd, info->parts[i], nr_parts);
+		if (err)
+			break;
+
+		info->nr_parts += nr_parts;
+	}
+out:
+	return err;
+}
+#else
+static int adm5120_flash_initparts(struct adm5120_flash_info *info)
+{
+	return 0;
+}
+#endif /* CONFIG_MTD_PARTITIONS */
+
+#ifdef CONFIG_MTD_PARTITIONS
+static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
+{
+	int i;
+
+	if (info->nr_parts) {
+		del_mtd_partitions(info->mtd);
+		for (i=0; i<MAX_PARSED_PARTS; i++)
+			if (info->parts[i] != NULL)
+				kfree(info->parts[i]);
+	} else {
+		del_mtd_device(info->mtd);
+	}
+}
+#else
+static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
+{
+	del_mtd_device(info->mtd);
+}
+#endif
+
+static int adm5120_flash_remove(struct platform_device *dev)
+{
+	struct adm5120_flash_info *info;
+
+	info = platform_get_drvdata(dev);
+	if (info == NULL)
+		return 0;
+
+	platform_set_drvdata(dev, NULL);
+
+	if (info->mtd != NULL) {
+		adm5120_flash_remove_mtd(info);
+		map_destroy(info->mtd);
+	}
+
+	if (info->amap.map.virt != NULL)
+		iounmap(info->amap.map.virt);
+
+	if (info->res != NULL) {
+		release_resource(info->res);
+		kfree(info->res);
+	}
+
+	return 0;
+}
+
+static int adm5120_flash_probe(struct platform_device *dev)
+{
+	struct adm5120_flash_info *info;
+	struct map_info *map;
+	const char **probe_type;
+	int err;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (info == NULL) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	platform_set_drvdata(dev, info);
+
+	err = adm5120_flash_initinfo(info, dev);
+	if (err)
+		goto err_out;
+
+	err = adm5120_flash_initres(info);
+	if (err)
+		goto err_out;
+
+	map = &info->amap.map;
+	for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL;
+		probe_type++)
+		info->mtd = do_map_probe(*probe_type, map);
+
+	if (info->mtd == NULL) {
+		MAP_ERR(map, "map_probe failed\n");
+		err = -ENXIO;
+		goto err_out;
+	}
+
+	adm5120_flash_initbanks(info);
+
+	if (info->mtd->size < info->amap.window_size) {
+		/* readjust resources */
+		iounmap(map->virt);
+		release_resource(info->res);
+		kfree(info->res);
+
+		info->amap.window_size = info->mtd->size;
+		map->size = info->mtd->size;
+		MAP_INFO(map, "reducing map size to %ldKiB\n",
+			(unsigned long)map->size >> 10);
+		err = adm5120_flash_initres(info);
+		if (err)
+			goto err_out;
+	}
+
+	MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n",
+		(unsigned long)map->phys, (unsigned long)info->mtd->size >> 10,
+		map->bankwidth*8);
+
+	info->mtd->owner = THIS_MODULE;
+
+	err = adm5120_flash_initparts(info);
+	if (err)
+		goto err_out;
+
+	if (info->nr_parts == 0) {
+		MAP_INFO(map, "no partitions available, registering whole flash\n");
+		add_mtd_device(info->mtd);
+	}
+
+	return 0;
+
+err_out:
+	adm5120_flash_remove(dev);
+	return err;
+}
+
+#ifdef CONFIG_PM
+static int adm5120_flash_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct adm5120_flash_info *info = platform_get_drvdata(dev);
+	int ret = 0;
+
+	if (info)
+		ret = info->mtd->suspend(info->mtd);
+
+	return ret;
+}
+
+static int adm5120_flash_resume(struct platform_device *dev)
+{
+	struct adm5120_flash_info *info = platform_get_drvdata(dev);
+
+	if (info)
+		info->mtd->resume(info->mtd);
+
+	return 0;
+}
+
+static void adm5120_flash_shutdown(struct platform_device *dev)
+{
+	struct adm5120_flash_info *info = platform_get_drvdata(dev);
+
+	if (info && info->mtd->suspend(info->mtd) == 0)
+		info->mtd->resume(info->mtd);
+}
+#endif
+
+static struct platform_driver adm5120_flash_driver = {
+	.probe		= adm5120_flash_probe,
+	.remove		= adm5120_flash_remove,
+#ifdef CONFIG_PM
+	.suspend	= adm5120_flash_suspend,
+	.resume		= adm5120_flash_resume,
+	.shutdown	= adm5120_flash_shutdown,
+#endif
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init adm5120_flash_init(void)
+{
+	int err;
+
+	err = platform_driver_register(&adm5120_flash_driver);
+
+	return err;
+}
+
+static void __exit adm5120_flash_exit(void)
+{
+	platform_driver_unregister(&adm5120_flash_driver);
+}
+
+module_init(adm5120_flash_init);
+module_exit(adm5120_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_DESCRIPTION(DRV_DESC);
diff --git a/target/linux/adm5120/files/drivers/mtd/myloader.c b/target/linux/adm5120/files/drivers/mtd/myloader.c
new file mode 100644
index 0000000000..ad207e5559
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/mtd/myloader.c
@@ -0,0 +1,178 @@
+/*
+ *  $Id$
+ *
+ *  Parse MyLoader-style flash partition tables and produce a Linux partition
+ *  array to match.
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was based on drivers/mtd/redboot.c
+ *  Author: Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/byteorder/generic.h>
+
+#include <prom/myloader.h>
+
+#define NAME_LEN_MAX		20
+#define NAME_MYLOADER		"MyLoader"
+#define NAME_PARTITION_TABLE	"Partition Table"
+#define BLOCK_LEN_MIN		0x10000
+
+int parse_myloader_partitions(struct mtd_info *master,
+			struct mtd_partition **pparts,
+			unsigned long origin)
+{
+	struct mylo_partition_table *tab;
+	struct mylo_partition *part;
+	struct mtd_partition *mtd_parts;
+	struct mtd_partition *mtd_part;
+	int num_parts;
+	int ret, i;
+	size_t retlen;
+	size_t parts_len;
+	char *names;
+	unsigned long offset;
+	unsigned long blocklen;
+
+	tab = vmalloc(sizeof(*tab));
+	if (!tab) {
+		return -ENOMEM;
+		goto out;
+	}
+
+	blocklen = master->erasesize;
+	if (blocklen < BLOCK_LEN_MIN)
+		blocklen = BLOCK_LEN_MIN;
+
+	/* Partition Table is always located on the second erase block */
+	offset = blocklen;
+	printk(KERN_NOTICE "%s: searching for MyLoader partition table at "
+			"offset 0x%lx\n", master->name, offset);
+
+	ret = master->read(master, offset, sizeof(*tab), &retlen, (void *)tab);
+	if (ret)
+		goto out;
+
+	if (retlen != sizeof(*tab)) {
+		ret = -EIO;
+		goto out_free_buf;
+	}
+
+	/* Check for Partition Table magic number */
+	if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
+		printk(KERN_NOTICE "%s: no MyLoader partition table found\n",
+			master->name);
+		ret = 0;
+		goto out_free_buf;
+	}
+
+	/* The MyLoader and the Partition Table is always present */
+	num_parts = 2;
+
+	/* Detect number of used partitions */
+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
+		part = &tab->partitions[i];
+
+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
+			continue;
+
+		num_parts++;
+	}
+
+	mtd_parts = kzalloc((num_parts*sizeof(*mtd_part) + num_parts*NAME_LEN_MAX),
+			 GFP_KERNEL);
+
+	if (!mtd_parts) {
+		ret = -ENOMEM;
+		goto out_free_buf;
+	}
+
+	mtd_part = mtd_parts;
+	names = (char *)&mtd_parts[num_parts];
+
+	strncpy(names, NAME_MYLOADER, NAME_LEN_MAX-1);
+	mtd_part->name = names;
+	mtd_part->offset = 0;
+	mtd_part->size = blocklen;
+	mtd_part->mask_flags = MTD_WRITEABLE;
+	mtd_part++;
+	names += NAME_LEN_MAX;
+
+	strncpy(names, NAME_PARTITION_TABLE, NAME_LEN_MAX-1);
+	mtd_part->name = names;
+	mtd_part->offset = blocklen;
+	mtd_part->size = blocklen;
+	mtd_part->mask_flags = MTD_WRITEABLE;
+	mtd_part++;
+	names += NAME_LEN_MAX;
+
+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
+		part = &tab->partitions[i];
+
+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
+			continue;
+
+		sprintf(names, "partition%d", i);
+		mtd_part->offset = le32_to_cpu(part->addr);
+		mtd_part->size = le32_to_cpu(part->size);
+		mtd_part->name = names;
+		mtd_part++;
+		names += NAME_LEN_MAX;
+	}
+
+	*pparts = mtd_parts;
+	ret = num_parts;
+
+out_free_buf:
+	vfree(tab);
+out:
+	return ret;
+}
+
+static struct mtd_part_parser mylo_mtd_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_myloader_partitions,
+	.name = NAME_MYLOADER,
+};
+
+static int __init mylo_mtd_parser_init(void)
+{
+	return register_mtd_parser(&mylo_mtd_parser);
+}
+
+static void __exit mylo_mtd_parser_exit(void)
+{
+	deregister_mtd_parser(&mylo_mtd_parser);
+}
+
+module_init(mylo_mtd_parser_init);
+module_exit(mylo_mtd_parser_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_DESCRIPTION("Parsing code for MyLoader partition tables");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/adm5120/files/drivers/mtd/nand/rbmipsnand.c b/target/linux/adm5120/files/drivers/mtd/nand/rbmipsnand.c
new file mode 100644
index 0000000000..2e7059d186
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/mtd/nand/rbmipsnand.c
@@ -0,0 +1,207 @@
+/*==============================================================================*/
+/* rbmipsnand.c                                                                 */
+/* This module is derived from the 2.4 driver shipped by Microtik for their     */
+/* Routerboard 1xx and 5xx series boards.  It provides support for the built in */
+/* NAND flash on the Routerboard 1xx series boards for Linux 2.6.19+.           */
+/* Licence: Original Microtik code seems not to have a licence.                 */
+/*          Rewritten code all GPL V2.                                          */
+/* Copyright(C) 2007 david.goodenough@linkchoose.co.uk (for rewriten code)      */
+/*==============================================================================*/
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bootinfo.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+
+#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(ADM5120_SRAM1_BASE) + x)))
+
+#define NAND_RW_REG	0x0	//data register
+#define NAND_SET_CEn	0x1	//CE# low
+#define NAND_CLR_CEn	0x2	//CE# high
+#define NAND_CLR_CLE	0x3	//CLE low
+#define NAND_SET_CLE	0x4	//CLE high
+#define NAND_CLR_ALE	0x5	//ALE low
+#define NAND_SET_ALE	0x6	//ALE high
+#define NAND_SET_SPn	0x7	//SP# low (use spare area)
+#define NAND_CLR_SPn	0x8	//SP# high (do not use spare area)
+#define NAND_SET_WPn	0x9	//WP# low
+#define NAND_CLR_WPn	0xA	//WP# high
+#define NAND_STS_REG	0xB	//Status register
+
+#define MEM32(x) *((volatile unsigned *) (x))
+
+static struct mtd_partition partition_info[] = {
+    {
+        name: "RouterBoard NAND Boot",
+        offset: 0,
+        size: 4 * 1024 * 1024
+    },
+    {
+        name: "rootfs",
+        offset: MTDPART_OFS_NXTBLK,
+        size: MTDPART_SIZ_FULL
+    }
+};
+
+static struct nand_ecclayout rb_ecclayout = {
+        .eccbytes = 6,
+        .eccpos = { 8, 9, 10, 13, 14, 15 },
+        .oobavail = 9,
+        .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1} }
+};
+
+struct adm5120_nand_info {
+	struct nand_chip chip;
+	struct mtd_info mtd;
+	void __iomem *io_base;
+#ifdef CONFIG_MTD_PARTITIONS
+	int	nr_parts;
+	struct mtd_partition *parts;
+#endif
+	unsigned int	init_ok;
+};
+
+static int rb100_dev_ready(struct mtd_info *mtd)
+{
+	return SMEM1(NAND_STS_REG) & 0x80;
+}
+
+static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+    	struct nand_chip *chip = mtd->priv;
+	if (ctrl & NAND_CTRL_CHANGE)
+	{
+        	SMEM1((( ctrl & NAND_CLE) ? NAND_SET_CLE : NAND_CLR_CLE)) = 0x01;
+        	SMEM1((( ctrl & NAND_ALE) ? NAND_SET_ALE : NAND_CLR_ALE)) = 0x01;
+        	SMEM1((( ctrl & NAND_NCE) ? NAND_SET_CEn : NAND_CLR_CEn)) = 0x01;
+        }
+    	if (cmd != NAND_CMD_NONE)
+        	writeb( cmd, chip->IO_ADDR_W);
+}
+
+/*========================================================================*/
+/* We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader */
+/* will not be able to find the kernel that we load.  So set the oobinfo  */
+/* when creating the partitions.                                          */ 
+/*========================================================================*/
+
+
+unsigned get_rbnand_block_size(struct adm5120_nand_info *data)
+{
+	return data->init_ok ? data->mtd.writesize : 0;
+}
+
+EXPORT_SYMBOL(get_rbnand_block_size);
+
+static int rbmips_probe(struct platform_device *pdev)
+{
+	struct adm5120_nand_info *data;
+	int res = 0;
+
+	/* Allocate memory for the nand_chip structure */
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&pdev->dev, "Failed to allocate device structure\n");
+		return -ENOMEM;
+
+	}
+	
+	data->io_base = ioremap(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1);
+
+	if (data->io_base == NULL) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		kfree(data);
+		return -EIO;
+	}
+
+	MEM32(0xB2000064) = 0x100;
+	MEM32(0xB2000008) = 0x1;
+	SMEM1(NAND_SET_SPn) = 0x01;
+	SMEM1(NAND_CLR_WPn) = 0x01;
+
+	data->chip.priv = &data;
+	data->mtd.priv = &data->chip;
+	data->mtd.owner = THIS_MODULE;
+
+	data->init_ok = 0;
+	data->chip.IO_ADDR_R = (unsigned char *)KSEG1ADDR(ADM5120_SRAM1_BASE);
+	data->chip.IO_ADDR_W = data->chip.IO_ADDR_R;
+	data->chip.cmd_ctrl = rbmips_hwcontrol100;
+	data->chip.dev_ready = rb100_dev_ready;
+	data->chip.ecc.mode = NAND_ECC_SOFT;
+	data->chip.ecc.layout = &rb_ecclayout;
+	data->chip.chip_delay = 25;
+	data->chip.options |= NAND_NO_AUTOINCR;
+
+	platform_set_drvdata(pdev, data);
+
+	/* Why do we need to scan 4 times ? */
+	if (nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1)  && nand_scan(&data->mtd, 1)) {
+		printk(KERN_INFO "RB1xxx nand device not found\n");
+		res = -ENXIO;
+		goto out;
+	}
+
+	add_mtd_partitions(&data->mtd, partition_info, 2);
+	data->init_ok = 1;
+
+	res = add_mtd_device(&data->mtd);
+	if (!res)
+		return res;
+
+	nand_release(&data->mtd);
+out:
+	platform_set_drvdata(pdev, NULL);
+	iounmap(data->io_base);
+	kfree(data);
+	return res;
+}
+
+static int __devexit rbmips_remove(struct platform_device *pdev)
+{
+	struct adm5120_nand_info *data = platform_get_drvdata(pdev);
+	
+	nand_release(&data->mtd);
+	iounmap(data->io_base);
+	kfree(data);
+	
+	return 0;
+}
+
+static struct platform_driver adm5120_nand_driver = {
+	.probe 		= rbmips_probe,
+	.remove 	= rbmips_remove,
+	.driver 	= {
+		.name	= "adm5120-nand",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init adm5120_nand_init(void)
+{
+	int err;
+	err = platform_driver_register(&adm5120_nand_driver);
+	return err;
+}
+
+static void __exit adm5120_nand_exit(void)
+{
+	platform_driver_unregister(&adm5120_nand_driver);
+}
+
+module_init(adm5120_nand_init);
+module_exit(adm5120_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Goodenough, Florian Fainelli");
+MODULE_DESCRIPTION("RouterBOARD 100 NAND driver");
+
diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.c b/target/linux/adm5120/files/drivers/net/adm5120sw.c
new file mode 100644
index 0000000000..80c81abf74
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/net/adm5120sw.c
@@ -0,0 +1,625 @@
+/*
+ *	ADM5120 built in ethernet switch driver
+ *
+ *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ *
+ *	Inspiration for this driver came from the original ADMtek 2.4
+ *	driver, Copyright ADMtek Inc.
+ *
+ *	NAPI extensions by Thomas Langer (Thomas.Langer@infineon.com)
+ *	and Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007
+ *
+ *	TODO: Add support of high prio queues (currently disabled)
+ *
+ */
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <asm/mipsregs.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include "adm5120sw.h"
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
+MODULE_DESCRIPTION("ADM5120 ethernet switch driver");
+MODULE_LICENSE("GPL");
+
+/* default settings - unlimited TX and RX on all ports, default shaper mode */
+static unsigned char bw_matrix[SW_DEVS] = {
+	0, 0, 0, 0, 0, 0
+};
+
+static int adm5120_nrdevs;
+
+static struct net_device *adm5120_devs[SW_DEVS];
+/* Lookup table port -> device */
+static struct net_device *adm5120_port[SW_DEVS];
+
+static struct adm5120_dma
+    adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))),
+    adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))),
+    adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))),
+    adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))),
+    *adm5120_dma_txh,
+    *adm5120_dma_txl,
+    *adm5120_dma_rxh,
+    *adm5120_dma_rxl;
+static struct sk_buff
+    *adm5120_skb_rxh[ADM5120_DMA_RXH],
+    *adm5120_skb_rxl[ADM5120_DMA_RXL],
+    *adm5120_skb_txh[ADM5120_DMA_TXH],
+    *adm5120_skb_txl[ADM5120_DMA_TXL];
+static int adm5120_rxli = 0;
+static int adm5120_txli = 0;
+/*static int adm5120_txhi = 0;*/
+static int adm5120_if_open = 0;
+
+static inline void adm5120_set_reg(unsigned int reg, unsigned long val)
+{
+	*(volatile unsigned long*)(SW_BASE+reg) = val;
+}
+
+static inline unsigned long adm5120_get_reg(unsigned int reg)
+{
+	return *(volatile unsigned long*)(SW_BASE+reg);
+}
+
+static inline void adm5120_rx_dma_update(struct adm5120_dma *dma,
+	struct sk_buff *skb, int end)
+{
+	dma->status = 0;
+	dma->cntl = 0;
+	dma->len = ADM5120_DMA_RXSIZE;
+	dma->data = ADM5120_DMA_ADDR(skb->data) |
+		ADM5120_DMA_OWN | (end ? ADM5120_DMA_RINGEND : 0);
+}
+
+static int adm5120_rx(struct net_device *dev,int *budget)
+{
+	struct sk_buff *skb, *skbn;
+	struct adm5120_sw *priv;
+	struct net_device *cdev;
+	struct adm5120_dma *dma;
+	int port, len, quota;
+
+	quota = min(dev->quota, *budget);
+	dma = &adm5120_dma_rxl[adm5120_rxli];
+	while (!(dma->data & ADM5120_DMA_OWN) && quota) {
+		port = (dma->status & ADM5120_DMA_PORTID);
+		port >>= ADM5120_DMA_PORTSHIFT;
+		cdev = adm5120_port[port];
+		if (cdev != dev) {      /* The current packet belongs to a different device */
+			if ((cdev==NULL) || !netif_running(cdev)) {
+				/* discard (update with old skb) */
+				skb = skbn = NULL;
+				goto rx_skip;
+			}
+			else {
+				netif_rx_schedule(cdev);/* Start polling next device */
+				return 1;       /* return 1 -> More packets to process */
+			}
+
+		}
+		skb = adm5120_skb_rxl[adm5120_rxli];
+		len = (dma->status & ADM5120_DMA_LEN);
+		len >>= ADM5120_DMA_LENSHIFT;
+		len -= ETH_FCS;
+
+		priv = netdev_priv(dev);
+		if (len <= 0 || len > ADM5120_DMA_RXSIZE ||
+			dma->status & ADM5120_DMA_FCSERR) {
+			priv->stats.rx_errors++;
+			skbn = NULL;
+		} else {
+			skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+			if (skbn) {
+				skb_put(skb, len);
+				skb->dev = dev;
+				skb->protocol = eth_type_trans(skb, dev);
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				dev->last_rx = jiffies;
+				priv->stats.rx_packets++;
+				priv->stats.rx_bytes += len;
+				skb_reserve(skbn, NET_IP_ALIGN);
+				adm5120_skb_rxl[adm5120_rxli] = skbn;
+			} else {
+				printk(KERN_INFO "%s recycling!\n", dev->name);
+			}
+		}
+rx_skip:
+		adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
+			adm5120_skb_rxl[adm5120_rxli],
+			(ADM5120_DMA_RXL-1==adm5120_rxli));
+		if (ADM5120_DMA_RXL == ++adm5120_rxli)
+			adm5120_rxli = 0;
+		dma = &adm5120_dma_rxl[adm5120_rxli];
+		if (skbn){
+			netif_receive_skb(skb);
+			dev->quota--;
+			(*budget)--;
+			quota--;
+		}
+	} /* while */
+	/* If there are still packets to process, return 1 */
+	if (quota){
+		/* No more packets to process, so disable the polling and reenable the interrupts */
+		netif_rx_complete(dev);
+		adm5120_set_reg(ADM5120_INT_MASK,
+			adm5120_get_reg(ADM5120_INT_MASK) &
+			~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
+		return 0;
+
+
+	}
+	return 1;
+}
+
+static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
+{
+	unsigned long intreg, intmask;
+	int port;
+	struct net_device *dev;
+
+	intmask = adm5120_get_reg(ADM5120_INT_MASK);   /* Remember interrupt mask */
+	adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL); /* Disable interrupts */
+
+	intreg = adm5120_get_reg(ADM5120_INT_ST); /* Read interrupt status */
+	adm5120_set_reg(ADM5120_INT_ST, intreg);  /* Clear interrupt status */
+
+	/* In NAPI operation the interrupts are disabled and the polling mechanism
+	 * is activated. The interrupts are finally enabled again in the polling routine.
+	 */
+	if (intreg & (ADM5120_INT_RXL|ADM5120_INT_LFULL)) {
+		/* check rx buffer for port number */
+		port = adm5120_dma_rxl[adm5120_rxli].status & ADM5120_DMA_PORTID;
+		port >>= ADM5120_DMA_PORTSHIFT;
+		dev = adm5120_port[port];
+		if ((dev==NULL) || !netif_running(dev)) {
+		/* discard (update with old skb) */
+			adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
+				adm5120_skb_rxl[adm5120_rxli],
+				(ADM5120_DMA_RXL-1==adm5120_rxli));
+			if (ADM5120_DMA_RXL == ++adm5120_rxli)
+				adm5120_rxli = 0;
+		}
+		else {
+			netif_rx_schedule(dev);
+			intmask |= (ADM5120_INT_RXL|ADM5120_INT_LFULL); /* Disable RX interrupts */
+		}
+	}
+#ifdef CONFIG_DEBUG
+	if (intreg & ~(intmask))
+		printk(KERN_INFO "adm5120sw: IRQ 0x%08X unexpected!\n", (unsigned int)(intreg & ~(intmask)));
+#endif
+
+	adm5120_set_reg(ADM5120_INT_MASK, intmask);
+
+	return IRQ_HANDLED;
+}
+
+static void adm5120_set_vlan(char *matrix)
+{
+	unsigned long val;
+	int vlan_port, port;
+
+	val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
+	adm5120_set_reg(ADM5120_VLAN_GI, val);
+	val = matrix[4] + (matrix[5]<<8);
+	adm5120_set_reg(ADM5120_VLAN_GII, val);
+	/* Now set/update the port vs. device lookup table */
+	for (port=0; port<SW_DEVS; port++) {
+		for (vlan_port=0; vlan_port<SW_DEVS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
+		if (vlan_port <SW_DEVS)
+			adm5120_port[port] = adm5120_devs[vlan_port];
+		else
+			adm5120_port[port] = NULL;
+	}
+}
+
+static void adm5120_set_bw(char *matrix)
+{
+	unsigned long val;
+
+	/* Port 0 to 3 are set using the bandwidth control 0 register */
+	val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
+	adm5120_set_reg(ADM5120_BW_CTL0, val);
+
+	/* Port 4 and 5 are set using the bandwidth control 1 register */
+	val = matrix[4];
+	if (matrix[5] == 1)
+		adm5120_set_reg(ADM5120_BW_CTL1, val | 0x80000000);
+	else
+		adm5120_set_reg(ADM5120_BW_CTL1, val & ~0x8000000);
+
+	printk(KERN_DEBUG "D: ctl0 0x%lx, ctl1 0x%lx\n",
+		adm5120_get_reg(ADM5120_BW_CTL0),
+		adm5120_get_reg(ADM5120_BW_CTL1));
+}
+
+static int adm5120_sw_open(struct net_device *dev)
+{
+	unsigned long val;
+	int i;
+
+	netif_start_queue(dev);
+	if (!adm5120_if_open++) {
+		/* enable interrupts on first open */
+		adm5120_set_reg(ADM5120_INT_MASK,
+			adm5120_get_reg(ADM5120_INT_MASK) &
+			~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
+	}
+	/* enable (additional) port */
+	val = adm5120_get_reg(ADM5120_PORT_CONF0);
+	for (i=0; i<SW_DEVS; i++) {
+		if (dev == adm5120_devs[i])
+			val &= ~adm5120_eth_vlans[i];
+	}
+	adm5120_set_reg(ADM5120_PORT_CONF0, val);
+	return 0;
+}
+
+static int adm5120_sw_stop(struct net_device *dev)
+{
+	unsigned long val;
+	int i;
+
+	if (!--adm5120_if_open) {
+		adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
+	}
+	/* disable port if not assigned to other devices */
+	val = adm5120_get_reg(ADM5120_PORT_CONF0) | ADM5120_PORTDISALL;
+	for (i=0; i<SW_DEVS; i++) {
+		if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i]))
+			val &= ~adm5120_eth_vlans[i];
+	}
+	adm5120_set_reg(ADM5120_PORT_CONF0, val);
+	netif_stop_queue(dev);
+	return 0;
+}
+
+static int adm5120_sw_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct adm5120_dma *dma;
+	struct sk_buff **skbl = adm5120_skb_txl;
+	struct adm5120_sw *priv = netdev_priv(dev);
+	unsigned long data;
+
+	dev->trans_start = jiffies;
+	dma = &adm5120_dma_txl[adm5120_txli];
+	if (dma->data & ADM5120_DMA_OWN) {
+		/* We want to write a packet but the TX queue is still
+		 * occupied by the DMA. We are faster than the DMA... */
+		dev_kfree_skb(skb);
+		priv->stats.tx_dropped++;
+		return 0;
+	}
+	data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
+	if (adm5120_txli == ADM5120_DMA_TXL-1)
+		data |= ADM5120_DMA_RINGEND;
+	dma->status =
+	    ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << ADM5120_DMA_LENSHIFT) |
+	    (0x1 << priv->port);
+
+	dma->len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+	priv->stats.tx_packets++;
+	priv->stats.tx_bytes += skb->len;
+
+	/* free old skbs here instead of tx completion interrupt:
+	 * will hold some more memory allocated but reduces interrupts */
+	if (skbl[adm5120_txli]){
+		dev_kfree_skb(skbl[adm5120_txli]);
+	}
+	skbl[adm5120_txli] = skb;
+
+	dma->data = data; /* Here we enable the buffer for the TX DMA machine */
+	adm5120_set_reg(ADM5120_SEND_TRIG, ADM5120_SEND_TRIG_L);
+	if (++adm5120_txli == ADM5120_DMA_TXL)
+		adm5120_txli = 0;
+	return 0;
+}
+
+static void adm5120_tx_timeout(struct net_device *dev)
+{
+	printk(KERN_INFO "%s: TX timeout\n",dev->name);
+}
+
+static struct net_device_stats *adm5120_sw_stats(struct net_device *dev)
+{
+	struct adm5120_sw *priv = netdev_priv(dev);
+	int portmask;
+	unsigned long adm5120_cpup_conf_reg;
+
+	portmask = adm5120_eth_vlans[priv->port] & 0x3f;
+
+	adm5120_cpup_conf_reg = adm5120_get_reg(ADM5120_CPUP_CONF);
+
+	if (dev->flags & IFF_PROMISC)
+		adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL);
+	else
+		adm5120_cpup_conf_reg |= (portmask << ADM5120_DISUNSHIFT);
+
+	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || dev->mc_count)
+		adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL);
+	else
+		adm5120_cpup_conf_reg |= (portmask << ADM5120_DISMCSHIFT);
+
+		/* If there is any port configured to be in promiscuous mode, then the */
+		/* Bridge Test Mode has to be activated. This will result in           */
+		/* transporting also packets learned in another VLAN to be forwarded   */
+		/* to the CPU.                                                         */
+		/* The difficult scenario is when we want to build a bridge on the CPU.*/
+		/* Assume we have port0 and the CPU port in VLAN0 and port1 and the    */
+		/* CPU port in VLAN1. Now we build a bridge on the CPU between         */
+		/* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode.   */
+		/* Now assume a packet with ethernet source address 99 enters port 0   */
+		/* It will be forwarded to the CPU because it is unknown. Then the     */
+		/* bridge in the CPU will send it to VLAN1 and it goes out at port 1.  */
+		/* When now a packet with ethernet destination address 99 comes in at  */
+		/* port 1 in VLAN1, then the switch has learned that this address is   */
+		/* located at port 0 in VLAN0. Therefore the switch will drop          */
+		/* this packet. In order to avoid this and to send the packet still    */
+		/* to the CPU, the Bridge Test Mode has to be activated.               */
+
+		/* Check if there is any vlan in promisc mode. */
+	if (~adm5120_cpup_conf_reg & ADM5120_DISUNALL)
+		adm5120_cpup_conf_reg |= ADM5120_BTM;  /* Set the BTM     */
+	else
+		adm5120_cpup_conf_reg &= ~ADM5120_BTM; /* Disable the BTM */
+
+	adm5120_set_reg(ADM5120_CPUP_CONF,adm5120_cpup_conf_reg);
+
+	return &((struct adm5120_sw *)netdev_priv(dev))->stats;
+}
+
+static void adm5120_set_multicast_list(struct net_device *dev)
+{
+	struct adm5120_sw *priv = netdev_priv(dev);
+	int portmask;
+
+	portmask = adm5120_eth_vlans[priv->port] & 0x3f;
+
+	if (dev->flags & IFF_PROMISC)
+		adm5120_set_reg(ADM5120_CPUP_CONF,
+		    adm5120_get_reg(ADM5120_CPUP_CONF) &
+		    ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL));
+	else
+		adm5120_set_reg(ADM5120_CPUP_CONF,
+		    adm5120_get_reg(ADM5120_CPUP_CONF) |
+		    (portmask << ADM5120_DISUNSHIFT));
+
+	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
+	    dev->mc_count)
+		adm5120_set_reg(ADM5120_CPUP_CONF,
+		    adm5120_get_reg(ADM5120_CPUP_CONF) &
+		    ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL));
+	else
+		adm5120_set_reg(ADM5120_CPUP_CONF,
+		    adm5120_get_reg(ADM5120_CPUP_CONF) |
+		    (portmask << ADM5120_DISMCSHIFT));
+}
+
+static void adm5120_write_mac(struct net_device *dev)
+{
+	struct adm5120_sw *priv = netdev_priv(dev);
+	unsigned char *mac = dev->dev_addr;
+
+	adm5120_set_reg(ADM5120_MAC_WT1,
+	    mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24));
+	adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) |
+	    (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN);
+
+	while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE));
+}
+
+static int adm5120_sw_set_mac_address(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+	adm5120_write_mac(dev);
+	return 0;
+}
+
+static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	int err;
+	struct adm5120_sw_info info;
+	struct adm5120_sw *priv = netdev_priv(dev);
+
+	switch(cmd) {
+		case SIOCGADMINFO:
+			info.magic = 0x5120;
+			info.ports = adm5120_nrdevs;
+			info.vlan = priv->port;
+			err = copy_to_user(rq->ifr_data, &info, sizeof(info));
+			if (err)
+				return -EFAULT;
+			break;
+		case SIOCSMATRIX:
+			if (!capable(CAP_NET_ADMIN))
+				return -EPERM;
+			err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
+			    sizeof(adm5120_eth_vlans));
+			if (err)
+				return -EFAULT;
+			adm5120_set_vlan(adm5120_eth_vlans);
+			break;
+		case SIOCGMATRIX:
+			err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
+			    sizeof(adm5120_eth_vlans));
+			if (err)
+				return -EFAULT;
+			break;
+		case SIOCGETBW:
+			err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix));
+			if (err)
+				return -EFAULT;
+			break;
+		case SIOCSETBW:
+			if (!capable(CAP_NET_ADMIN))
+				return -EPERM;
+			err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix));
+			if (err)
+				return -EFAULT;
+			adm5120_set_bw(bw_matrix);
+			break;
+		default:
+			return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
+    int num)
+{
+	memset(dma, 0, sizeof(struct adm5120_dma)*num);
+	dma[num-1].data |= ADM5120_DMA_RINGEND;
+	memset(skbl, 0, sizeof(struct skb*)*num);
+}
+
+static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
+    int num)
+{
+	int i;
+
+	memset(dma, 0, sizeof(struct adm5120_dma)*num);
+	for (i=0; i<num; i++) {
+		skbl[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+		if (!skbl[i]) {
+			i=num;
+			break;
+		}
+		skb_reserve(skbl[i], NET_IP_ALIGN);
+		adm5120_rx_dma_update(&dma[i], skbl[i], (num-1==i));
+	}
+}
+
+static int __init adm5120_sw_init(void)
+{
+	int i, err;
+	struct net_device *dev;
+
+	err = request_irq(ADM5120_IRQ_SWITCH, adm5120_sw_irq, 0, "ethernet switch", NULL);
+	if (err)
+		goto out;
+
+	adm5120_nrdevs = adm5120_eth_num_ports;
+
+	adm5120_set_reg(ADM5120_CPUP_CONF,
+	    ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
+	    ADM5120_DISUNALL | ADM5120_DISMCALL);
+	adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP | ADM5120_PORTDISALL);
+
+	adm5120_set_reg(ADM5120_PHY_CNTL2, adm5120_get_reg(ADM5120_PHY_CNTL2) |
+	    ADM5120_AUTONEG | ADM5120_NORMAL | ADM5120_AUTOMDIX);
+	adm5120_set_reg(ADM5120_PHY_CNTL3, adm5120_get_reg(ADM5120_PHY_CNTL3) |
+	    ADM5120_PHY_NTH);
+
+	/* Force all the packets from all ports are low priority */
+	adm5120_set_reg(ADM5120_PRI_CNTL, 0);
+
+	adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
+	adm5120_set_reg(ADM5120_INT_ST, ADM5120_INTMASKALL);
+
+	adm5120_dma_txh = (void *)KSEG1ADDR((u32)adm5120_dma_txh_v);
+	adm5120_dma_txl = (void *)KSEG1ADDR((u32)adm5120_dma_txl_v);
+	adm5120_dma_rxh = (void *)KSEG1ADDR((u32)adm5120_dma_rxh_v);
+	adm5120_dma_rxl = (void *)KSEG1ADDR((u32)adm5120_dma_rxl_v);
+
+	adm5120_dma_tx_init(adm5120_dma_txh, adm5120_skb_txh, ADM5120_DMA_TXH);
+	adm5120_dma_tx_init(adm5120_dma_txl, adm5120_skb_txl, ADM5120_DMA_TXL);
+	adm5120_dma_rx_init(adm5120_dma_rxh, adm5120_skb_rxh, ADM5120_DMA_RXH);
+	adm5120_dma_rx_init(adm5120_dma_rxl, adm5120_skb_rxl, ADM5120_DMA_RXL);
+	adm5120_set_reg(ADM5120_SEND_HBADDR, KSEG1ADDR(adm5120_dma_txh));
+	adm5120_set_reg(ADM5120_SEND_LBADDR, KSEG1ADDR(adm5120_dma_txl));
+	adm5120_set_reg(ADM5120_RECEIVE_HBADDR, KSEG1ADDR(adm5120_dma_rxh));
+	adm5120_set_reg(ADM5120_RECEIVE_LBADDR, KSEG1ADDR(adm5120_dma_rxl));
+
+	for (i = 0; i < SW_DEVS; i++) {
+		adm5120_devs[i] = alloc_etherdev(sizeof(struct adm5120_sw));
+		if (!adm5120_devs[i]) {
+			err = -ENOMEM;
+			goto out_int;
+		}
+
+		dev = adm5120_devs[i];
+		SET_MODULE_OWNER(dev);
+		memset(netdev_priv(dev), 0, sizeof(struct adm5120_sw));
+		((struct adm5120_sw*)netdev_priv(dev))->port = i;
+		dev->base_addr = SW_BASE;
+		dev->irq = ADM5120_IRQ_SWITCH;
+		dev->open = adm5120_sw_open;
+		dev->hard_start_xmit = adm5120_sw_tx;
+		dev->stop = adm5120_sw_stop;
+		dev->get_stats = adm5120_sw_stats;
+		dev->set_multicast_list = adm5120_set_multicast_list;
+		dev->do_ioctl = adm5120_do_ioctl;
+		dev->tx_timeout = adm5120_tx_timeout;
+		dev->watchdog_timeo = ETH_TX_TIMEOUT;
+		dev->set_mac_address = adm5120_sw_set_mac_address;
+		dev->poll = adm5120_rx;
+		dev->weight = 64;
+
+		memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
+		adm5120_write_mac(dev);
+
+		if ((err = register_netdev(dev))) {
+			free_netdev(dev);
+			goto out_int;
+		}
+		printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i);
+	}
+	/* setup vlan/port mapping after devs are filled up */
+	adm5120_set_vlan(adm5120_eth_vlans);
+
+	adm5120_set_reg(ADM5120_CPUP_CONF,
+	    ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL);
+
+	return 0;
+
+out_int:
+	/* Undo everything that did succeed */
+	for (; i; i--) {
+		unregister_netdev(adm5120_devs[i-1]);
+		free_netdev(adm5120_devs[i-1]);
+	}
+	free_irq(ADM5120_IRQ_SWITCH, NULL);
+out:
+	printk(KERN_ERR "ADM5120 Ethernet switch init failed\n");
+	return err;
+}
+
+static void __exit adm5120_sw_exit(void)
+{
+	int i;
+
+	for (i = 0; i < SW_DEVS; i++) {
+		unregister_netdev(adm5120_devs[i]);
+		free_netdev(adm5120_devs[i]);
+	}
+
+	free_irq(ADM5120_IRQ_SWITCH, NULL);
+
+	for (i = 0; i < ADM5120_DMA_RXH; i++) {
+		if (!adm5120_skb_rxh[i])
+			break;
+		kfree_skb(adm5120_skb_rxh[i]);
+	}
+	for (i = 0; i < ADM5120_DMA_RXL; i++) {
+		if (!adm5120_skb_rxl[i])
+			break;
+		kfree_skb(adm5120_skb_rxl[i]);
+	}
+}
+
+module_init(adm5120_sw_init);
+module_exit(adm5120_sw_exit);
diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.h b/target/linux/adm5120/files/drivers/net/adm5120sw.h
new file mode 100644
index 0000000000..a3b4ec0179
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/net/adm5120sw.h
@@ -0,0 +1,114 @@
+/*
+ *	Defines for ADM5120 built in ethernet switch driver
+ *
+ *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ *
+ *	Values come from ADM5120 datasheet and original ADMtek 2.4 driver,
+ *	Copyright ADMtek Inc.
+ */
+
+#ifndef _INCLUDE_ADM5120SW_H_
+#define _INCLUDE_ADM5120SW_H_
+
+#define SW_BASE	KSEG1ADDR(0x12000000)
+#define SW_DEVS	6
+
+#define ETH_TX_TIMEOUT		HZ*400
+#define ETH_FCS 4;
+
+#define ADM5120_CODE		0x00		/* CPU description */
+#define ADM5120_CODE_PQFP	0x20000000	/* package type */
+#define ADM5120_SW_CONF		0x20            /* Switch configuration register */
+#define ADM5120_SW_CONF_BPM	0x00300000      /* Mask for backpressure mode */
+#define ADM5120_CPUP_CONF	0x24		/* CPU port config */
+#define ADM5120_DISCCPUPORT	0x00000001	/* disable cpu port */
+#define ADM5120_CRC_PADDING	0x00000002	/* software crc */
+#define ADM5120_BTM		0x00000004      /* bridge test mode */
+#define ADM5120_DISUNSHIFT	9
+#define ADM5120_DISUNALL	0x00007e00	/* disable unknown from all */
+#define ADM5120_DISMCSHIFT	16
+#define ADM5120_DISMCALL	0x003f0000	/* disable multicast from all */
+#define ADM5120_PORT_CONF0	0x28
+#define ADM5120_ENMC		0x00003f00	/* Enable MC routing (ex cpu) */
+#define ADM5120_ENBP		0x003f0000	/* Enable Back Pressure */
+#define ADM5120_PORTDISALL     	0x0000003F
+#define ADM5120_VLAN_GI		0x40		/* VLAN settings */
+#define ADM5120_VLAN_GII	0x44
+#define ADM5120_SEND_TRIG	0x48
+#define ADM5120_SEND_TRIG_L	0x00000001
+#define ADM5120_SEND_TRIG_H	0x00000002
+#define ADM5120_MAC_WT0		0x58
+#define ADM5120_MAC_WRITE	0x00000001
+#define ADM5120_MAC_WRITE_DONE	0x00000002
+#define ADM5120_VLAN_EN		0x00000040
+#define ADM5120_MAC_WT1		0x5c
+#define ADM5120_BW_CTL0		0x60		/* Bandwidth control 0 */
+#define ADM5120_BW_CTL1		0x64		/* Bandwidth control 1 */
+#define ADM5120_PHY_CNTL2	0x7c
+#define ADM5120_AUTONEG		0x0000001f	/* Auto negotiate */
+#define ADM5120_NORMAL		0x01f00000	/* PHY normal mode */
+#define ADM5120_AUTOMDIX	0x3e000000	/* Auto MDIX */
+#define ADM5120_PHY_CNTL3	0x80
+#define ADM5120_PHY_NTH		0x00000400
+#define ADM5120_PRI_CNTL	0x84
+#define ADM5120_INT_ST		0xb0
+#define ADM5120_INT_RXH		0x0000004
+#define ADM5120_INT_RXL		0x0000008
+#define ADM5120_INT_HFULL	0x0000010
+#define ADM5120_INT_LFULL	0x0000020
+#define ADM5120_INT_TXH		0x0000001
+#define ADM5120_INT_TXL		0x0000002
+#define ADM5120_INT_MASK	0xb4
+#define ADM5120_INTMASKALL	0x1FDEFFF	/* All interrupts */
+#define ADM5120_INTHANDLE	(ADM5120_INT_RXH | ADM5120_INT_RXL | \
+				 ADM5120_INT_HFULL | ADM5120_INT_LFULL | \
+				 ADM5120_INT_TXH | ADM5120_INT_TXL)
+#define ADM5120_SEND_HBADDR	0xd0
+#define ADM5120_SEND_LBADDR	0xd4
+#define ADM5120_RECEIVE_HBADDR	0xd8
+#define ADM5120_RECEIVE_LBADDR	0xdc
+
+struct adm5120_dma {
+	u32 data;
+	u32 cntl;
+	u32 len;
+	u32 status;
+} __attribute__ ((packed));
+
+#define	ADM5120_DMA_MASK	0x01ffffff
+#define ADM5120_DMA_OWN		0x80000000	/* buffer owner */
+#define ADM5120_DMA_RINGEND	0x10000000	/* Last in DMA ring */
+
+#define ADM5120_DMA_ADDR(ptr)	((u32)(ptr) & ADM5120_DMA_MASK)
+#define ADM5120_DMA_PORTID	0x00007000
+#define ADM5120_DMA_PORTSHIFT	12
+#define ADM5120_DMA_LEN		0x07ff0000
+#define ADM5120_DMA_LENSHIFT	16
+#define ADM5120_DMA_FCSERR	0x00000008
+
+#define ADM5120_DMA_TXH		2
+#define ADM5120_DMA_TXL		64
+#define ADM5120_DMA_RXH		2
+#define ADM5120_DMA_RXL		64
+
+#define ADM5120_DMA_RXSIZE	1550
+#define ADM5120_DMA_EXTRA	20
+
+struct adm5120_sw {
+	int			port;
+	struct net_device_stats	stats;
+};
+
+#define SIOCSMATRIX	SIOCDEVPRIVATE
+#define SIOCGMATRIX	SIOCDEVPRIVATE+1
+#define SIOCGADMINFO	SIOCDEVPRIVATE+2
+#define SIOCGETBW	SIOCDEVPRIVATE+3
+#define SIOCSETBW	SIOCDEVPRIVATE+4
+
+struct adm5120_sw_info {
+	u16	magic;
+	u16	ports;
+	u16	vlan;
+};
+
+#endif /* _INCLUDE_ADM5120SW_H_ */
diff --git a/target/linux/adm5120/files/drivers/serial/adm5120_uart.c b/target/linux/adm5120/files/drivers/serial/adm5120_uart.c
new file mode 100644
index 0000000000..83c5f72012
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/serial/adm5120_uart.c
@@ -0,0 +1,520 @@
+/*
+ *	Serial driver for ADM5120 SoC
+ *
+ *	Derived from drivers/serial/uart00.c
+ *	Copyright 2001 Altera Corporation
+ *
+ *	Some pieces are derived from the ADMtek 2.4 serial driver.
+ *	Copyright (C) ADMtek Incorporated, 2003
+ *		daniell@admtek.com.tw
+ *	Which again was derived from drivers/char/serial.c
+ *	Copyright (C) Linus Torvalds et al.
+ *
+ *	Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/console.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+#define ADM5120_UART_REG(base, reg) \
+	(*(volatile u32 *)KSEG1ADDR((base)+(reg)))
+
+#define ADM5120_UARTCLK_FREQ            62500000
+#define ADM5120_UART_BAUDDIV(rate)	((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(rate)) - 1))
+
+#define ADM5120_UART_BAUD115200		ADM5120_UART_BAUDDIV(115200)
+
+#define ADM5120_UART_DATA		0x00
+#define ADM5120_UART_RS			0x04
+#define ADM5120_UART_LCR_H		0x08
+#define ADM5120_UART_LCR_M		0x0c
+#define ADM5120_UART_LCR_L		0x10
+#define ADM5120_UART_CR			0x14
+#define ADM5120_UART_FR			0x18
+#define ADM5120_UART_IR			0x1c
+
+#define ADM5120_UART_FE			0x01
+#define ADM5120_UART_PE			0x02
+#define ADM5120_UART_BE			0x04
+#define ADM5120_UART_OE			0x08
+#define ADM5120_UART_ERR		0x0f
+#define ADM5120_UART_FIFO_EN		0x10
+#define ADM5120_UART_EN			0x01
+#define ADM5120_UART_TIE		0x20
+#define ADM5120_UART_RIE		0x50
+#define ADM5120_UART_IE			0x78
+#define ADM5120_UART_CTS		0x01
+#define ADM5120_UART_DSR		0x02
+#define ADM5120_UART_DCD		0x04
+#define ADM5120_UART_TXFF		0x20
+#define ADM5120_UART_TXFE		0x80
+#define ADM5120_UART_RXFE		0x10
+#define ADM5120_UART_BRK		0x01
+#define ADM5120_UART_PEN		0x02
+#define ADM5120_UART_EPS		0x04
+#define ADM5120_UART_STP2		0x08
+#define ADM5120_UART_W5			0x00
+#define ADM5120_UART_W6			0x20
+#define ADM5120_UART_W7			0x40
+#define ADM5120_UART_W8			0x60
+#define ADM5120_UART_MIS		0x01
+#define ADM5120_UART_RIS		0x02
+#define ADM5120_UART_TIS		0x04
+#define ADM5120_UART_RTIS		0x08
+
+static void adm5120ser_stop_tx(struct uart_port *port)
+{
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE;
+}
+
+static void adm5120ser_irq_rx(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->tty;
+	unsigned int status, ch, rds, flg, ignored = 0;
+
+	status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+	while (!(status & ADM5120_UART_RXFE)) {
+		/* 
+		 * We need to read rds before reading the 
+		 * character from the fifo
+		 */
+		rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS);
+		ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA);
+		port->icount.rx++;
+
+		if (tty->low_latency)
+			tty_flip_buffer_push(tty);
+
+		flg = TTY_NORMAL;
+
+		/*
+		 * Note that the error handling code is
+		 * out of the main execution path
+		 */
+		if (rds & ADM5120_UART_ERR)
+			goto handle_error;
+		if (uart_handle_sysrq_char(port, ch))
+			goto ignore_char;
+
+	error_return:
+		tty_insert_flip_char(tty, ch, flg);
+
+	ignore_char:
+		status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+	}
+ out:
+	tty_flip_buffer_push(tty);
+	return;
+
+ handle_error:
+ 	ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff;
+	if (rds & ADM5120_UART_BE) {
+		port->icount.brk++;
+		if (uart_handle_break(port))
+			goto ignore_char;
+	} else if (rds & ADM5120_UART_PE)
+		port->icount.parity++;
+	else if (rds & ADM5120_UART_FE)
+		port->icount.frame++;
+	if (rds & ADM5120_UART_OE)
+		port->icount.overrun++;
+
+	if (rds & port->ignore_status_mask) {
+		if (++ignored > 100)
+			goto out;
+		goto ignore_char;
+	}
+	rds &= port->read_status_mask;
+
+	if (rds & ADM5120_UART_BE)
+		flg = TTY_BREAK;
+	else if (rds & ADM5120_UART_PE)
+		flg = TTY_PARITY;
+	else if (rds & ADM5120_UART_FE)
+		flg = TTY_FRAME;
+
+	if (rds & ADM5120_UART_OE) {
+		/*
+		 * CHECK: does overrun affect the current character?
+		 * ASSUMPTION: it does not.
+		 */
+		tty_insert_flip_char(tty, ch, flg);
+		ch = 0;
+		flg = TTY_OVERRUN;
+	}
+#ifdef CONFIG_MAGIC_SYSRQ
+	port->sysrq = 0;
+#endif
+	goto error_return;
+}
+
+static void adm5120ser_irq_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+	int count;
+
+	if (port->x_char) {
+		ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
+		    port->x_char;
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		adm5120ser_stop_tx(port);
+		return;
+	}
+
+	count = port->fifosize >> 1;
+	do {
+		ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
+		    xmit->buf[xmit->tail];
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		adm5120ser_stop_tx(port);
+}
+
+static void adm5120ser_irq_modem(struct uart_port *port)
+{
+	unsigned int status;
+
+	status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+
+	if (status & ADM5120_UART_DCD)
+		uart_handle_dcd_change(port, status & ADM5120_UART_DCD);
+
+	if (status & ADM5120_UART_DSR)
+		port->icount.dsr++;
+
+	if (status & ADM5120_UART_CTS)
+		uart_handle_cts_change(port, status & ADM5120_UART_CTS);
+
+	wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static irqreturn_t adm5120ser_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR);
+
+	if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS))
+		adm5120ser_irq_rx(port);
+	if (ir & ADM5120_UART_TIS)
+		adm5120ser_irq_tx(port);
+	if (ir & ADM5120_UART_MIS) {
+		adm5120ser_irq_modem(port);
+		ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int adm5120ser_tx_empty(struct uart_port *port)
+{
+	unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+	return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0;
+}
+
+static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int adm5120ser_get_mctrl(struct uart_port *port)
+{
+	unsigned int result = 0;
+	unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
+
+	if (fr & ADM5120_UART_CTS)
+		result |= TIOCM_CTS;
+	if (fr & ADM5120_UART_DSR)
+		result |= TIOCM_DSR;
+	if (fr & ADM5120_UART_DCD)
+		result |= TIOCM_CAR;
+	return result;
+}
+
+static void adm5120ser_start_tx(struct uart_port *port)
+{
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE;
+}
+
+static void adm5120ser_stop_rx(struct uart_port *port)
+{
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE;
+}
+
+static void adm5120ser_enable_ms(struct uart_port *port)
+{
+}
+
+static void adm5120ser_break_ctl(struct uart_port *port, int break_state)
+{
+	unsigned long flags;
+	unsigned long lcrh;
+
+	spin_lock_irqsave(&port->lock, flags);
+	lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H);
+	if (break_state == -1)
+		lcrh |= ADM5120_UART_BRK;
+	else
+		lcrh &= ~ADM5120_UART_BRK;
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int adm5120ser_startup(struct uart_port *port)
+{
+	int ret;
+
+	ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port);
+	if (ret) {
+		printk(KERN_ERR "Couldn't get irq %d\n", port->irq);
+		return ret;
+	}
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |=
+	    ADM5120_UART_FIFO_EN;
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |=
+	    ADM5120_UART_EN | ADM5120_UART_IE;
+	return 0;
+}
+
+static void adm5120ser_shutdown(struct uart_port *port)
+{
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE;
+	free_irq(port->irq, port);
+}
+
+static void adm5120ser_set_termios(struct uart_port *port,
+    struct ktermios *termios, struct ktermios *old)
+{
+	unsigned int baud, quot, lcrh;
+	unsigned long flags;
+
+	termios->c_cflag |= CREAD;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	quot = uart_get_divisor(port, baud);
+
+	lcrh = ADM5120_UART_FIFO_EN;
+	switch (termios->c_cflag & CSIZE) {
+		case CS5:
+			lcrh |= ADM5120_UART_W5;
+			break;
+		case CS6:
+			lcrh |= ADM5120_UART_W6;
+			break;
+		case CS7:
+			lcrh |= ADM5120_UART_W7;
+			break;
+		default:
+			lcrh |= ADM5120_UART_W8;
+			break;
+	}
+	if (termios->c_cflag & CSTOPB)
+		lcrh |= ADM5120_UART_STP2;
+	if (termios->c_cflag & PARENB) {
+		lcrh |= ADM5120_UART_PEN;
+		if (!(termios->c_cflag & PARODD))
+			lcrh |= ADM5120_UART_EPS;
+	}
+
+	spin_lock_irqsave(port->lock, flags);
+
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = ADM5120_UART_OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= ADM5120_UART_BE;
+
+	/*
+	 * Characters to ignore
+	 */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= ADM5120_UART_BE;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns to (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= ADM5120_UART_OE;
+	}
+
+	quot = ADM5120_UART_BAUD115200;
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff;
+	ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8;
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *adm5120ser_type(struct uart_port *port)
+{
+	return port->type == PORT_ADM5120 ? "ADM5120" : NULL;
+}
+
+static void adm5120ser_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_ADM5120;
+}
+
+static void adm5120ser_release_port(struct uart_port *port)
+{
+	release_mem_region(port->iobase, ADM5120_UART_SIZE);
+}
+
+static int adm5120ser_request_port(struct uart_port *port)
+{
+	return request_mem_region(port->iobase, ADM5120_UART_SIZE,
+	    "adm5120-uart") != NULL ? 0 : -EBUSY; 
+}
+
+static struct uart_ops adm5120ser_ops = {
+	.tx_empty =	adm5120ser_tx_empty,
+	.set_mctrl =	adm5120ser_set_mctrl,
+	.get_mctrl =	adm5120ser_get_mctrl,
+	.stop_tx =	adm5120ser_stop_tx,
+	.start_tx =	adm5120ser_start_tx,
+	.stop_rx =	adm5120ser_stop_rx,
+	.enable_ms =	adm5120ser_enable_ms,
+	.break_ctl =	adm5120ser_break_ctl,
+	.startup =	adm5120ser_startup,
+	.shutdown =	adm5120ser_shutdown,
+	.set_termios =	adm5120ser_set_termios,
+	.type =		adm5120ser_type,
+	.config_port =	adm5120ser_config_port,
+	.release_port =	adm5120ser_release_port,
+	.request_port =	adm5120ser_request_port,
+};
+
+static void adm5120console_put(const char c)
+{
+	while ((ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_FR) &
+	     ADM5120_UART_TXFF) != 0);
+	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_DATA) = c;
+}
+
+static void adm5120console_write(struct console *con, const char *s,
+    unsigned int count)
+{
+	while (count--) {
+		if (*s == '\n')
+			adm5120console_put('\r');
+		adm5120console_put(*s);
+		s++;
+	}
+}
+
+static int adm5120console_setup(struct console *con, char *options)
+{
+	/* Set to 115200 baud, 8N1 and enable FIFO */
+	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_L) =
+	    ADM5120_UART_BAUD115200 & 0xff;
+	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_M) =
+	    ADM5120_UART_BAUD115200 >> 8;
+	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_H) =
+	    ADM5120_UART_W8 | ADM5120_UART_FIFO_EN;
+	/* Enable port */
+	ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_CR) =
+	    ADM5120_UART_EN;
+
+	return 0;
+}
+
+static struct uart_driver adm5120ser_reg;
+
+static struct console adm5120_serconsole = {
+	.name =		"ttyS",
+	.write =	adm5120console_write,
+	.device =	uart_console_device,
+	.setup =	adm5120console_setup,
+	.flags =	CON_PRINTBUFFER,
+	.cflag =	B115200 | CS8 | CREAD,
+	.index =	0,
+	.data =		&adm5120ser_reg,
+};
+
+static int __init adm5120console_init(void)
+{
+	register_console(&adm5120_serconsole);
+	return 0;
+}
+
+console_initcall(adm5120console_init);
+
+
+static struct uart_port adm5120ser_ports[] = {
+	{
+		.iobase =	ADM5120_UART0_BASE,
+		.irq =		ADM5120_IRQ_UART0,
+		.uartclk =	ADM5120_UARTCLK_FREQ,
+		.fifosize =	16,
+		.ops =		&adm5120ser_ops,
+		.line =		0,
+		.flags =	ASYNC_BOOT_AUTOCONF,
+	},
+#if (CONFIG_ADM5120_NR_UARTS > 1)
+	{
+		.iobase =	ADM5120_UART1_BASE,
+		.irq =		ADM5120_IRQ_UART1,
+		.uartclk =	ADM5120_UARTCLK_FREQ,
+		.fifosize =	16,
+		.ops =		&adm5120ser_ops,
+		.line =		1,
+		.flags =	ASYNC_BOOT_AUTOCONF,
+	},
+#endif
+};
+
+static struct uart_driver adm5120ser_reg = {
+	.owner	=	THIS_MODULE,
+	.driver_name =	"ttyS",
+	.dev_name =	"ttyS",
+	.major =	TTY_MAJOR,
+	.minor =	64,
+	.nr =		CONFIG_ADM5120_NR_UARTS,
+	.cons =		&adm5120_serconsole,
+};
+
+static int __init adm5120ser_init(void)
+{
+	int ret, i;
+
+	ret = uart_register_driver(&adm5120ser_reg);
+	if (!ret) {
+		for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++)
+			uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]);
+	}
+
+	return ret;
+}
+
+__initcall(adm5120ser_init);
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
new file mode 100644
index 0000000000..4e88777287
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
@@ -0,0 +1,996 @@
+/*
+ *	HCD driver for ADM5120 SoC
+ *
+ *	Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ *
+ *	Based on the ADMtek 2.4 driver
+ *	(C) Copyright 2003 Junius Chen <juniusc@admtek.com.tw>
+ *	Which again was based on the ohci and uhci drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+
+#include "../core/hcd.h"
+
+MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
+
+#define PFX	"adm5120-hcd: "
+
+#define ADMHCD_REG_CONTROL		0x00
+#define  ADMHCD_SW_RESET		0x00000008	/* Reset */
+#define  ADMHCD_DMAA			0x00000004	/* DMA arbitration control */
+#define  ADMHCD_SW_INTREQ		0x00000002	/* request software int */
+#define  ADMHCD_HOST_EN			0x00000001	/* Host enable */
+#define ADMHCD_REG_INTSTATUS		0x04
+#define  ADMHCD_INT_ACT			0x80000000	/* Interrupt active */
+#define  ADMHCD_INT_FATAL		0x40000000	/* Fatal interrupt */
+#define  ADMHCD_INT_SW			0x20000000	/* software interrupt */
+#define  ADMHCD_INT_TD			0x00100000	/* TD completed */
+#define  ADMHCD_FNO			0x00000800	/* Frame number overaflow */
+#define  ADMHCD_SO			0x00000400	/* Scheduling overrun */
+#define  ADMHCD_INSMI			0x00000200	/* Root hub status change */
+#define  ADMHCD_BABI			0x00000100	/* Babble detected, host mode */
+#define  ADMHCD_RESI			0x00000020	/* Resume detected */
+#define  ADMHCD_SOFI			0x00000010	/* SOF transmitted/received, host mode */
+#define ADMHCD_REG_INTENABLE		0x08
+#define  ADMHCD_INT_EN			0x80000000	/* Interrupt enable */
+#define  ADMHCD_INTMASK			0x00000001	/* Interrupt mask */
+#define ADMHCD_REG_HOSTCONTROL		0x10
+#define  ADMHCD_DMA_EN			0x00000004	/* USB host DMA enable */
+#define  ADMHCD_STATE_MASK		0x00000003
+#define  ADMHCD_STATE_RST		0x00000000	/* bus state reset */
+#define  ADMHCD_STATE_RES		0x00000001	/* bus state resume */
+#define  ADMHCD_STATE_OP		0x00000002	/* bus state operational */
+#define  ADMHCD_STATE_SUS		0x00000003	/* bus state suspended */
+#define ADMHCD_REG_FMINTERVAL		0x18
+#define ADMHCD_REG_FMNUMBER		0x1c
+#define ADMHCD_REG_LSTHRESH		0x70
+#define ADMHCD_REG_RHDESCR		0x74
+#define  ADMHCD_CRWE			0x20000000	/* Clear wakeup enable */
+#define  ADMHCD_DRWE			0x10000000	/* Device remote wakeup enable */
+#define  ADMHCD_HW_OCIC			0x08000000	/* Over current indication change */
+#define  ADMHCD_LPSC			0x04000000	/* Local power switch change */
+#define  ADMHCD_OCI			0x02000000	/* Over current indication */
+#define  ADMHCD_LPS			0x01000000	/* Local power switch/global power switch */
+#define  ADMHCD_NOCP			0x00000800	/* No over current protect mode */
+#define  ADMHCD_OPCM			0x00000400	/* Over current protect mode */
+#define  ADMHCD_NPS			0x00000200	/* No Power Switch */
+#define  ADMHCD_PSM			0x00000100	/* Power switch mode */
+#define ADMHCD_REG_PORTSTATUS0		0x78
+#define  ADMHCD_CCS			0x00000001	/* current connect status */
+#define  ADMHCD_PES			0x00000002	/* port enable status */
+#define  ADMHCD_PSS			0x00000004	/* port suspend status */
+#define  ADMHCD_POCI			0x00000008	/* port overcurrent indicator */
+#define  ADMHCD_PRS			0x00000010	/* port reset status */
+#define  ADMHCD_PPS			0x00000100	/* port power status */
+#define  ADMHCD_LSDA			0x00000200	/* low speed device attached */
+#define  ADMHCD_CSC			0x00010000	/* connect status change */
+#define  ADMHCD_PESC			0x00020000	/* enable status change */
+#define  ADMHCD_PSSC			0x00040000	/* suspend status change */
+#define  ADMHCD_OCIC			0x00080000	/* overcurrent change*/
+#define  ADMHCD_PRSC			0x00100000	/* reset status change */
+#define ADMHCD_REG_PORTSTATUS1		0x7c
+#define ADMHCD_REG_HOSTHEAD		0x80
+
+#define ADMHCD_NUMPORTS			1
+#define ADMHCD_DESC_ALIGN	16
+
+struct admhcd_ed {
+	/* Don't change first four, they used for DMA */
+	u32				control;
+	struct admhcd_td		*tail;
+	struct admhcd_td		*head;
+	struct admhcd_ed		*next;
+	/* the rest is for the driver only: */
+	struct admhcd_td		*cur;
+	struct usb_host_endpoint 	*ep;
+	struct urb			*urb;
+	struct admhcd_ed		*real;
+} __attribute__ ((packed));
+
+#define ADMHCD_ED_EPSHIFT	7		/* Shift for endpoint number */
+#define ADMHCD_ED_INT		0x00000800	/* Is this an int endpoint */
+#define ADMHCD_ED_SPEED		0x00002000	/* Is it a high speed dev? */
+#define ADMHCD_ED_SKIP		0x00004000	/* Skip this ED */
+#define ADMHCD_ED_FORMAT	0x00008000	/* Is this an isoc endpoint */
+#define ADMHCD_ED_MAXSHIFT	16		/* Shift for max packet size */
+
+struct admhcd_td {
+	/* Don't change first four, they are used for DMA */
+	u32			control;
+	u32			buffer;
+	u32			buflen;
+	struct admhcd_td	*next;
+	/* the rest is for the driver only: */
+	struct urb		*urb;
+	struct admhcd_td	*real;
+} __attribute__ ((packed));
+
+#define ADMHCD_TD_OWN		0x80000000
+#define ADMHCD_TD_TOGGLE	0x00000000
+#define ADMHCD_TD_DATA0		0x01000000
+#define ADMHCD_TD_DATA1		0x01800000
+#define ADMHCD_TD_OUT		0x00200000
+#define ADMHCD_TD_IN		0x00400000
+#define ADMHCD_TD_SETUP		0x00000000
+#define ADMHCD_TD_ISO		0x00010000
+#define ADMHCD_TD_R		0x00040000
+#define ADMHCD_TD_INTEN		0x00010000
+
+static int admhcd_td_err[16] = {
+	0,		/* No */
+	-EREMOTEIO,	/* CRC */
+	-EREMOTEIO,	/* bit stuff */
+	-EREMOTEIO,	/* data toggle */
+	-EPIPE,		/* stall */
+	-ETIMEDOUT,	/* timeout */
+	-EPROTO,	/* pid err */
+	-EPROTO,	/* unexpected pid */
+	-EREMOTEIO,	/* data overrun */
+	-EREMOTEIO,	/* data underrun */
+	-ETIMEDOUT,	/* 1010 */
+	-ETIMEDOUT,	/* 1011 */
+	-EREMOTEIO,	/* buffer overrun */
+	-EREMOTEIO,	/* buffer underrun */
+	-ETIMEDOUT,	/* 1110 */
+	-ETIMEDOUT,	/* 1111 */
+};
+
+#define ADMHCD_TD_ERRMASK	0x38000000
+#define ADMHCD_TD_ERRSHIFT	27
+
+#define TD(td)	((struct admhcd_td *)(((u32)(td)) & ~(ADMHCD_DESC_ALIGN-1)))
+#define ED(ed)	((struct admhcd_ed *)(((u32)(ed)) & ~(ADMHCD_DESC_ALIGN-1)))
+
+struct admhcd {
+	spinlock_t	lock;
+
+	/* Root hub registers */
+	u32 rhdesca;
+	u32 rhdescb;
+	u32 rhstatus;
+	u32 rhport[2];
+
+	/* async schedule: control, bulk */
+	struct list_head async;
+	u32		base;
+	u32		dma_en;
+	unsigned long	flags;
+};
+
+static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
+{
+	return (struct admhcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *admhcd_to_hcd(struct admhcd *admhcd)
+{
+	return container_of((void *)admhcd, struct usb_hcd, hcd_priv);
+}
+
+static char hcd_name[] = "adm5120-hcd";
+
+static u32 admhcd_reg_get(struct admhcd *ahcd, int reg)
+{
+	return *(volatile u32 *)KSEG1ADDR(ahcd->base+reg);
+}
+
+static void admhcd_reg_set(struct admhcd *ahcd, int reg, u32 val)
+{
+	*(volatile u32 *)KSEG1ADDR(ahcd->base+reg) = val;
+}
+
+static void admhcd_lock(struct admhcd *ahcd)
+{
+	spin_lock_irqsave(&ahcd->lock, ahcd->flags);
+	ahcd->dma_en = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) &
+		ADMHCD_DMA_EN;
+	admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
+}
+
+static void admhcd_unlock(struct admhcd *ahcd)
+{
+	admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL,
+		ADMHCD_STATE_OP | ahcd->dma_en);
+	spin_unlock_irqrestore(&ahcd->lock, ahcd->flags);
+}
+
+static struct admhcd_td *admhcd_td_alloc(struct admhcd_ed *ed, struct urb *urb)
+{
+	struct admhcd_td *tdn, *td;
+
+	tdn = kzalloc(sizeof(*tdn)+ADMHCD_DESC_ALIGN, GFP_ATOMIC);
+	if (!tdn)
+		return NULL;
+
+	tdn->real = tdn;
+	tdn = TD(KSEG1ADDR(tdn));
+	if (ed->cur == NULL) {
+		ed->cur = tdn;
+		ed->head = tdn;
+		ed->tail = tdn;
+		td = tdn;
+	} else {
+		/* Supply back the old tail and link in new td as tail */
+		td = TD(ed->tail);
+		TD(ed->tail)->next = tdn;
+		ed->tail = tdn;
+	}
+	td->urb = urb;
+
+	return td;
+}
+
+static void admhcd_td_free(struct admhcd_ed *ed, struct urb *urb)
+{
+	struct admhcd_td *td, **tdp;
+
+	if (urb == NULL)
+		ed->control |= ADMHCD_ED_SKIP;
+	tdp = &ed->cur;
+	td = ed->cur;
+	do {
+		if (td->urb == urb)
+			break;
+		tdp = &td->next;
+		td = TD(td->next);
+	} while (td);
+	while (td && td->urb == urb) {
+		*tdp = TD(td->next);
+		kfree(td->real);
+		td = *tdp;
+	}
+}
+
+/* Find an endpoint's descriptor, if needed allocate a new one and link it
+   in the DMA chain
+ */
+static struct admhcd_ed *admhcd_get_ed(struct admhcd *ahcd,
+		struct usb_host_endpoint *ep, struct urb *urb)
+{
+	struct admhcd_ed *hosthead;
+	struct admhcd_ed *found = NULL, *ed = NULL;
+	unsigned int pipe = urb->pipe;
+
+	admhcd_lock(ahcd);
+	hosthead = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+	if (hosthead) {
+		for (ed = hosthead;; ed = ED(ed->next)) {
+			if (ed->ep == ep) {
+				found = ed;
+				break;
+			}
+			if (ED(ed->next) == hosthead)
+				break;
+		}
+	}
+	if (!found) {
+		found = kzalloc(sizeof(*found)+ADMHCD_DESC_ALIGN, GFP_ATOMIC);
+		if (!found)
+			goto out;
+		found->real = found;
+		found->ep = ep;
+		found = ED(KSEG1ADDR(found));
+		found->control = usb_pipedevice(pipe) |
+		    (usb_pipeendpoint(pipe) << ADMHCD_ED_EPSHIFT) |
+		    (usb_pipeint(pipe) ? ADMHCD_ED_INT : 0) |
+		    (urb->dev->speed == USB_SPEED_FULL ? ADMHCD_ED_SPEED : 0) |
+		    (usb_pipeisoc(pipe) ? ADMHCD_ED_FORMAT : 0) |
+		    (usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)) << ADMHCD_ED_MAXSHIFT);
+		/* Alloc first dummy td */
+		admhcd_td_alloc(found, NULL);
+		if (hosthead) {
+			found->next = hosthead;
+			ed->next = found;
+		} else {
+			found->next = found;
+			admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)found);
+		}
+	}
+out:
+	admhcd_unlock(ahcd);
+	return found;
+}
+
+static struct admhcd_td *admhcd_td_fill(u32 control, struct admhcd_td *td,
+		dma_addr_t data, int len)
+{
+	td->buffer = data;
+	td->buflen = len;
+	td->control = control;
+	return TD(td->next);
+}
+
+static void admhcd_ed_start(struct admhcd *ahcd, struct admhcd_ed *ed)
+{
+	struct admhcd_td *td = ed->cur;
+
+	if (ed->urb)
+		return;
+	if (td->urb) {
+		ed->urb = td->urb;
+		while (1) {
+			td->control |= ADMHCD_TD_OWN;
+			if (TD(td->next)->urb != td->urb) {
+				td->buflen |= ADMHCD_TD_INTEN;
+				break;
+			}
+			td = TD(td->next);
+		}
+	}
+	ed->head = TD(ed->head);
+	ahcd->dma_en |= ADMHCD_DMA_EN;
+}
+
+static irqreturn_t admhcd_irq(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	u32 intstatus;
+
+	intstatus = admhcd_reg_get(ahcd, ADMHCD_REG_INTSTATUS);
+	if (intstatus & ADMHCD_INT_FATAL) {
+		admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_FATAL);
+		/* FIXME: handle fatal interrupts */
+	}
+
+	if (intstatus & ADMHCD_INT_SW) {
+		admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_SW);
+		/* FIXME: handle software interrupts */
+	}
+
+	if (intstatus & ADMHCD_INT_TD) {
+		struct admhcd_ed *ed, *head;
+
+		admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_TD);
+
+		head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+		ed = head;
+		if (ed) do {
+			/* Is it a finished TD? */
+			if (ed->urb && !(ed->cur->control & ADMHCD_TD_OWN)) {
+				struct admhcd_td *td;
+				int error;
+
+				td = ed->cur;
+				error = (td->control & ADMHCD_TD_ERRMASK) >>
+				    ADMHCD_TD_ERRSHIFT;
+				ed->urb->status = admhcd_td_err[error];
+				admhcd_td_free(ed, ed->urb);
+				// Calculate real length!!!
+				ed->urb->actual_length = ed->urb->transfer_buffer_length;
+				ed->urb->hcpriv = NULL;
+				usb_hcd_giveback_urb(hcd, ed->urb);
+				ed->urb = NULL;
+			}
+			admhcd_ed_start(ahcd, ed);
+			ed = ED(ed->next);
+		} while (ed != head);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int admhcd_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
+		struct urb *urb, gfp_t mem_flags)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	struct admhcd_ed *ed;
+	struct admhcd_td *td;
+	int size = 0, i, zero = 0, ret = 0;
+	unsigned int pipe = urb->pipe, toggle = 0;
+	dma_addr_t data = (dma_addr_t)urb->transfer_buffer;
+	int data_len = urb->transfer_buffer_length;
+
+	ed = admhcd_get_ed(ahcd, ep, urb);
+	if (!ed)
+		return -ENOMEM;
+
+	switch(usb_pipetype(pipe)) {
+	case PIPE_CONTROL:
+		size = 2;
+	case PIPE_INTERRUPT:
+	case PIPE_BULK:
+	default:
+		size += urb->transfer_buffer_length / 4096;
+		if (urb->transfer_buffer_length % 4096)
+			size++;
+		if (size == 0)
+			size++;
+		else if (urb->transfer_flags & URB_ZERO_PACKET &&
+		    !(urb->transfer_buffer_length %
+		      usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)))) {
+			size++;
+			zero = 1;
+		}
+		break;
+	case PIPE_ISOCHRONOUS:
+		size = urb->number_of_packets;
+		break;
+	}
+
+	admhcd_lock(ahcd);
+	/* Remember the first td */
+	td = admhcd_td_alloc(ed, urb);
+	if (!td) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	/* Allocate additionall tds first */
+	for (i = 1; i < size; i++) {
+		if (admhcd_td_alloc(ed, urb) == NULL) {
+			admhcd_td_free(ed, urb);
+			ret = -ENOMEM;
+			goto out;
+		}
+	}
+
+	if (usb_gettoggle(urb->dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
+		toggle = ADMHCD_TD_TOGGLE;
+	else {
+		toggle = ADMHCD_TD_DATA0;
+		usb_settoggle(urb->dev, usb_pipeendpoint(pipe),
+		    usb_pipeout(pipe), 1);
+	}
+
+	switch(usb_pipetype(pipe)) {
+	case PIPE_CONTROL:
+		td = admhcd_td_fill(ADMHCD_TD_SETUP | ADMHCD_TD_DATA0,
+		    td, (dma_addr_t)urb->setup_packet, 8);
+		while (data_len > 0) {
+			td = admhcd_td_fill(ADMHCD_TD_DATA1
+			    | ADMHCD_TD_R |
+			    (usb_pipeout(pipe) ?
+			    ADMHCD_TD_OUT : ADMHCD_TD_IN), td,
+			    data, data_len % 4097);
+			data_len -= 4096;
+		}
+		admhcd_td_fill(ADMHCD_TD_DATA1 | (usb_pipeout(pipe) ?
+		    ADMHCD_TD_IN : ADMHCD_TD_OUT), td,
+		    data, 0);
+		break;
+	case PIPE_INTERRUPT:
+	case PIPE_BULK:
+		//info ok for interrupt?
+		i = 0;
+		while(data_len > 4096) {
+			td = admhcd_td_fill((usb_pipeout(pipe) ?
+			    ADMHCD_TD_OUT :
+			    ADMHCD_TD_IN | ADMHCD_TD_R) |
+			    (i ? ADMHCD_TD_TOGGLE : toggle), td,
+			    data, 4096);
+			data += 4096;
+			data_len -= 4096;
+			i++;
+		}
+		td = admhcd_td_fill((usb_pipeout(pipe) ?
+		    ADMHCD_TD_OUT : ADMHCD_TD_IN) |
+		    (i ? ADMHCD_TD_TOGGLE : toggle), td, data, data_len);
+		i++;
+		if (zero)
+			admhcd_td_fill((usb_pipeout(pipe) ?
+			    ADMHCD_TD_OUT : ADMHCD_TD_IN) |
+			    (i ? ADMHCD_TD_TOGGLE : toggle), td, 0, 0);
+		break;
+	case PIPE_ISOCHRONOUS:
+		for (i = 0; i < urb->number_of_packets; i++) {
+			td = admhcd_td_fill(ADMHCD_TD_ISO |
+			    ((urb->start_frame + i) & 0xffff), td,
+			    data + urb->iso_frame_desc[i].offset,
+			    urb->iso_frame_desc[i].length);
+		}
+		break;
+	}
+	urb->hcpriv = ed;
+	admhcd_ed_start(ahcd, ed);
+out:
+	admhcd_unlock(ahcd);
+	return ret;
+}
+
+static int admhcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	struct admhcd_ed *ed;
+
+	admhcd_lock(ahcd);
+
+	ed = urb->hcpriv;
+	if (ed && ed->urb != urb)
+		admhcd_td_free(ed, urb);
+
+	admhcd_unlock(ahcd);
+	return 0;
+}
+
+static void admhcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	struct admhcd_ed *ed, *edt, *head;
+
+	admhcd_lock(ahcd);
+
+	head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD);
+	if (!head)
+		goto out;
+	for (ed = head; ED(ed->next) != head; ed = ED(ed->next))
+		if (ed->ep == ep)
+			break;
+	if (ed->ep != ep)
+		goto out;
+	while (ed->cur)
+		admhcd_td_free(ed, ed->cur->urb);
+	if (head == ed) {
+		if (ED(ed->next) == ed) {
+			admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0);
+			ahcd->dma_en = 0;
+			goto out_free;
+		}
+		head = ED(ed->next);
+		for (edt = head; ED(edt->next) != head; edt = ED(edt->next));
+		edt->next = ED(ed->next);
+		admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)ed->next);
+		goto out_free;
+	}
+	for (edt = head; edt->next != ed; edt = edt->next);
+	edt->next = ed->next;
+
+out_free:
+	kfree(ed->real);
+out:
+	admhcd_unlock(ahcd);
+}
+
+static int admhcd_get_frame_number(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+
+	return admhcd_reg_get(ahcd, ADMHCD_REG_FMNUMBER) & 0x0000ffff;
+}
+
+static int admhcd_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	int port;
+
+	*buf = 0;
+	for (port = 0; port < ADMHCD_NUMPORTS; port++) {
+		if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) &
+		    (ADMHCD_CSC | ADMHCD_PESC | ADMHCD_PSSC | ADMHCD_OCIC |
+		     ADMHCD_PRSC))
+			*buf |= (1 << (port + 1));
+	}
+	return !!*buf;
+}
+
+static __u8 root_hub_hub_des[] = {
+	0x09,		/* __u8  bLength; */
+	0x29,		/* __u8  bDescriptorType; Hub-descriptor */
+	0x02,		/* __u8  bNbrPorts; */
+	0x0a, 0x00,	/* __u16 wHubCharacteristics; */
+	0x01,		/* __u8  bPwrOn2pwrGood; 2ms */
+	0x00,		/* __u8  bHubContrCurrent; 0mA */
+	0x00,		/* __u8  DeviceRemovable; */
+	0xff,		/* __u8  PortPwrCtrlMask; */
+};
+
+static int admhcd_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		u16 wIndex, char *buf, u16 wLength)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	int retval = 0, len;
+	unsigned int port = wIndex -1;
+
+	switch (typeReq) {
+
+	case GetHubStatus:
+		*(__le32 *)buf = cpu_to_le32(0);
+		break;
+	case GetPortStatus:
+		if (port >= ADMHCD_NUMPORTS)
+			goto err;
+		*(__le32 *)buf = cpu_to_le32(
+		    admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4));
+		break;
+	case SetHubFeature:		/* We don't implement these */
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto err;
+		}
+	case SetPortFeature:
+		if (port >= ADMHCD_NUMPORTS)
+			goto err;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PSS);
+			break;
+		case USB_PORT_FEAT_RESET:
+			if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4)
+			    & ADMHCD_CCS) {
+				admhcd_reg_set(ahcd,
+				    ADMHCD_REG_PORTSTATUS0 + port*4,
+				    ADMHCD_PRS | ADMHCD_CSC);
+				mdelay(50);
+				admhcd_reg_set(ahcd,
+				    ADMHCD_REG_PORTSTATUS0 + port*4,
+				    ADMHCD_PES | ADMHCD_CSC);
+			}
+			break;
+		case USB_PORT_FEAT_POWER:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PPS);
+			break;
+		default:
+			goto err;
+		}
+		break;
+	case ClearPortFeature:
+		if (port >= ADMHCD_NUMPORTS)
+			goto err;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_CCS);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PESC);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_POCI);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PSSC);
+		case USB_PORT_FEAT_POWER:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_LSDA);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_CSC);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_OCIC);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4,
+			    ADMHCD_PRSC);
+			break;
+		default:
+			goto err;
+		}
+		break;
+	case GetHubDescriptor:
+		len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
+		memcpy(buf, root_hub_hub_des, len);
+		break;
+	default:
+err:
+		retval = -EPIPE;
+	}
+
+	return retval;
+}
+
+static int admhcd_start(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ahcd->lock, flags);
+
+	/* Initialise the HCD registers */
+	admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
+	mdelay(10);
+
+	admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
+
+	while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET) {
+		printk(KERN_WARNING PFX "waiting for reset to complete\n");
+		mdelay(1);
+	}
+
+	//hcd->uses_new_polling = 1;
+
+	/* Enable USB host mode */
+	admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_HOST_EN);
+
+	/* Set host specific settings */
+	admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0x00000000);
+	admhcd_reg_set(ahcd, ADMHCD_REG_FMINTERVAL, 0x20002edf);
+	admhcd_reg_set(ahcd, ADMHCD_REG_LSTHRESH, 0x628);
+
+	/* Set interrupts */
+	admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, ADMHCD_INT_ACT |
+		ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
+	admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_ACT |
+		ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
+
+	/* Power on all ports */
+	admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC);
+
+	/* HCD is now operationnal */
+	admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
+
+	hcd->state = HC_STATE_RUNNING;
+
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+
+	return 0;
+}
+
+static int admhcd_sw_reset(struct admhcd *ahcd)
+{
+	int retries = 15;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&ahcd->lock, flags);
+
+	admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
+	mdelay(10);
+
+	admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
+
+	while (--retries) {
+		mdelay(1);
+		if (!(admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET))
+			break;
+	}
+	if (!retries) {
+		printk(KERN_WARNING "%s: software reset timeout\n", hcd_name);
+		ret = -ETIME;
+	}
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+	return ret;
+}
+
+static int admhcd_reset(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	u32 state = 0;
+	int ret, timeout = 15; /* ms */
+	unsigned long t;
+
+	ret = admhcd_sw_reset(ahcd);
+	if (ret)
+		return ret;
+
+	t = jiffies + msecs_to_jiffies(timeout);
+	do {
+		spin_lock_irq(&ahcd->lock);
+		state = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL);
+		spin_unlock_irq(&ahcd->lock);
+		state &= ADMHCD_STATE_MASK;
+		if (state == ADMHCD_STATE_RST)
+			break;
+		msleep(4);
+	} while (time_before_eq(jiffies, t));
+
+	if (state != ADMHCD_STATE_RST) {
+		printk(KERN_WARNING "%s: device not ready after %dms\n",
+			hcd_name, timeout);
+		ret = -ENODEV;
+	}
+
+	return ret;
+}
+
+static void admhcd_stop(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&ahcd->lock, flags);
+	admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
+
+	/* Set global control of power for ports */
+	val = admhcd_reg_get(ahcd, ADMHCD_REG_RHDESCR);
+	val &= (~ADMHCD_PSM | ADMHCD_LPS);
+	admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, val);
+
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+
+	/* Ask for software reset */
+	admhcd_sw_reset(ahcd);
+}
+
+
+static struct hc_driver adm5120_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"ADM5120 HCD",
+	.hcd_priv_size =	sizeof(struct admhcd),
+	.irq =			admhcd_irq,
+	.flags =		HCD_USB11,
+	.urb_enqueue =		admhcd_urb_enqueue,
+	.urb_dequeue =		admhcd_urb_dequeue,
+	.endpoint_disable =	admhcd_endpoint_disable,
+	.get_frame_number =	admhcd_get_frame_number,
+	.hub_status_data =	admhcd_hub_status_data,
+	.hub_control =		admhcd_hub_control,
+	.start	=		admhcd_start,
+	.stop	=		admhcd_stop,
+	.reset =		admhcd_reset,
+};
+
+#define resource_len(r) (((r)->end - (r)->start) + 1)
+
+static int __init adm5120hcd_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct admhcd *ahcd;
+	struct resource *data;
+	void __iomem *data_reg;
+
+	int err = 0, irq;
+
+	if (pdev->num_resources < 2) {
+		printk(KERN_WARNING PFX "not enough resources\n");
+		err = -ENODEV;
+		goto out;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (pdev->dev.dma_mask) {
+		printk(KERN_DEBUG PFX "no we won't dma\n");
+		return -EINVAL;
+	}
+
+	if (!data || irq < 0) {
+		printk(KERN_DEBUG PFX "either IRQ or data resource is invalid\n");
+		err = -ENODEV;
+		goto out;
+	}
+
+	if (!request_mem_region(data->start, resource_len(data), hcd_name)) {
+		printk(KERN_DEBUG PFX "cannot request memory regions for the data resource\n");
+		err = -EBUSY;
+		goto out;
+	}
+
+	data_reg = ioremap(data->start, resource_len(data));
+	if (data_reg == NULL) {
+		printk(KERN_DEBUG PFX "unable to ioremap\n");
+		err = -ENOMEM;
+		goto out_mem;
+        }
+
+	hcd = usb_create_hcd(&adm5120_hc_driver, &pdev->dev, pdev->dev.bus_id);
+	if (!hcd) {
+		printk(KERN_DEBUG PFX "unable to create the hcd\n");
+		err = -ENOMEM;
+		goto out_unmap;
+	}
+
+	hcd->rsrc_start = data->start;
+	hcd->rsrc_len = resource_len(data);
+	hcd->regs = data_reg;
+
+	ahcd = hcd_to_admhcd(hcd);
+	ahcd->base = (u32)data_reg;
+
+	spin_lock_init(&ahcd->lock);
+	INIT_LIST_HEAD(&ahcd->async);
+
+	hcd->product_desc = "ADM5120 HCD";
+
+	err = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	if (err) {
+		printk(KERN_DEBUG PFX "unable to add hcd\n");
+		goto out_dev;
+	}
+
+	return 0;
+
+out_dev:
+	usb_put_hcd(hcd);
+out_unmap:
+	iounmap(data_reg);
+out_mem:
+	release_mem_region(data->start, resource_len(data));
+out:
+	return err;
+}
+
+#ifdef CONFIG_PM
+static int adm5120hcd_suspend(struct platform_device *pdev,  pm_message_t state)
+{
+	pdev->dev.power.power_state = state;
+	mdelay(1);
+	return 0;
+}
+
+static int adm5120hcd_resume(struct platform_device *pdev, pm_message_t state)
+{
+	pdev->dev.power.power_state = PMSG_ON;
+	mdelay(1);
+	return 0;
+}
+#else
+#define adm5120hcd_suspend 	NULL
+#define adm5120hcd_resume 	NULL
+#endif
+
+static int __init_or_module adm5120hcd_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct admhcd *ahcd;
+
+	if (!hcd)
+		return 0;
+	ahcd = hcd_to_admhcd(hcd);
+	usb_remove_hcd(hcd);
+
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static struct platform_driver adm5120hcd_driver = {
+	.probe =	adm5120hcd_probe,
+	.remove =	adm5120hcd_remove,
+	.suspend = 	adm5120hcd_suspend,
+	.remove = 	adm5120hcd_resume,
+	.driver	=	{
+		.name 	= (char *)hcd_name,
+		.owner 	= THIS_MODULE,
+	},
+};
+
+static int __init adm5120hcd_init(void)
+{
+	int ret;
+
+	if (usb_disabled()) {
+		printk(KERN_DEBUG PFX "USB support is disabled\n");
+		return -ENODEV;
+	}
+
+	if (mips_machgroup != MACH_GROUP_ADM5120) {
+		printk(KERN_DEBUG PFX "unsupported machine group\n");
+		return -ENODEV;
+	}
+
+	ret = platform_driver_register(&adm5120hcd_driver);
+	if (ret == 0)
+		printk(KERN_INFO PFX "registered\n");
+
+	return ret;
+}
+
+static void __exit adm5120hcd_exit(void)
+{
+	platform_driver_unregister(&adm5120hcd_driver);
+	printk(KERN_INFO PFX "driver unregistered\n");
+}
+
+module_init(adm5120hcd_init);
+module_exit(adm5120hcd_exit);
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h
new file mode 100644
index 0000000000..23f62a2932
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h
@@ -0,0 +1,50 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 board definitions
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_BOARD_H_
+#define _ADM5120_BOARD_H_
+
+#include <linux/init.h>
+#include <linux/list.h>
+
+#define ADM5120_BOARD_NAMELEN	64
+
+struct adm5120_board {
+	unsigned long		mach_type;
+	char			name[ADM5120_BOARD_NAMELEN];
+
+	void			(*board_setup)(void);
+	void			(*board_reset)(void);
+
+	unsigned int		eth_num_ports;
+	unsigned char		*eth_vlans;
+	unsigned int		num_devices;
+	struct platform_device	**devices;
+
+	struct list_head	list;
+};
+
+extern void adm5120_board_register(struct adm5120_board *) __init;
+
+#endif /* _ADM5120_BOARD_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h
new file mode 100644
index 0000000000..f5ab1b3f1c
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h
@@ -0,0 +1,60 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 SoC definitions
+ *
+ *  This file defines some constants specific to the ADM5120 SoC
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+#ifndef _ADM5120_DEFS_H
+#define _ADM5120_DEFS_H
+
+#define ADM5120_SDRAM0_BASE	0x00000000
+#define ADM5120_SDRAM1_BASE	0x01000000
+#define ADM5120_SRAM1_BASE	0x10000000
+#define ADM5120_MPMC_BASE	0x11000000
+#define ADM5120_USBC_BASE	0x11200000
+#define ADM5120_PCIMEM_BASE	0x11400000
+#define ADM5120_PCIIO_BASE	0x11500000
+#define ADM5120_PCICFG_ADDR	0x115FFFF0
+#define ADM5120_PCICFG_DATA	0x115FFFF8
+#define ADM5120_SWITCH_BASE	0x12000000
+#define ADM5120_INTC_BASE	0x12200000
+#define ADM5120_UART0_BASE	0x12600000
+#define ADM5120_UART1_BASE	0x12800000
+#define ADM5120_SRAM0_BASE	0x1FC00000
+
+#define ADM5120_MPMC_SIZE	0x1000
+#define ADM5120_USBC_SIZE	0x84
+#define ADM5120_PCIMEM_SIZE	(ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE)
+#define ADM5120_PCIIO_SIZE	(ADM5120_PCICFG_ADDR - ADM5120_PCIIO_BASE)
+#define ADM5120_PCICFG_SIZE	0x10
+#define ADM5120_SWITCH_SIZE	0x114
+#define ADM5120_INTC_SIZE	0x28
+#define ADM5120_UART_SIZE	0x20
+
+#define ADM5120_CLK_175		175000000
+#define ADM5120_CLK_200		200000000
+#define ADM5120_CLK_225		225000000
+#define ADM5120_CLK_250		250000000
+
+#define ADM5120_UART_CLOCK	62500000
+
+#endif /* _ADM5120_DEFS_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h
new file mode 100644
index 0000000000..b8b9c5d475
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h
@@ -0,0 +1,92 @@
+/*
+ *  $Id$
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_INFO_H
+#define _ADM5120_INFO_H
+
+#include <linux/types.h>
+
+extern unsigned int adm5120_prom_type;
+#define ADM5120_PROM_GENERIC	0
+#define ADM5120_PROM_CFE	1
+#define ADM5120_PROM_MYLOADER	2
+#define ADM5120_PROM_ROUTERBOOT	3
+#define ADM5120_PROM_BOOTBASE	4
+#define ADM5120_PROM_UBOOT	5
+#define ADM5120_PROM_LAST	5
+
+extern unsigned int adm5120_product_code;
+extern unsigned int adm5120_revision;
+extern unsigned int adm5120_nand_boot;
+
+extern unsigned long adm5120_speed;
+#define ADM5120_SPEED_175	175000000
+#define ADM5120_SPEED_200	200000000
+#define ADM5120_SPEED_225	225000000
+#define ADM5120_SPEED_250	250000000
+
+extern unsigned int adm5120_package;
+#define ADM5120_PACKAGE_PQFP	0
+#define ADM5120_PACKAGE_BGA	1
+
+extern unsigned long adm5120_memsize;
+
+/*
+ * TODO:remove adm5120_eth* variables when the switch driver will be
+ * 	converted into a real platform driver
+ */
+extern unsigned int adm5120_eth_num_ports;
+extern unsigned char adm5120_eth_macs[6][6];
+extern unsigned char adm5120_eth_vlans[6];
+
+extern void adm5120_soc_init(void) __init;
+extern void adm5120_mem_init(void) __init;
+extern void adm5120_time_init(void) __init;
+extern void adm5120_ndelay(u32 ns);
+
+extern void adm5120_restart(char *command);
+extern void adm5120_halt(void);
+extern void adm5120_power_off(void);
+
+extern void (*adm5120_board_reset)(void);
+
+static inline int adm5120_package_pqfp(void)
+{
+	return (adm5120_package == ADM5120_PACKAGE_PQFP);
+}
+
+static inline int adm5120_package_bga(void)
+{
+	return (adm5120_package == ADM5120_PACKAGE_BGA);
+}
+
+static inline int adm5120_has_pci(void)
+{
+	return (adm5120_package == ADM5120_PACKAGE_BGA);
+}
+
+static inline int adm5120_has_gmii(void)
+{
+	return (adm5120_package == ADM5120_PACKAGE_BGA);
+}
+
+#endif /* _ADM5120_INFO_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h
new file mode 100644
index 0000000000..4d75259514
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h
@@ -0,0 +1,76 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 interrupt controller definitions
+ *
+ *  This header file defines the hardware registers of the ADM5120 SoC
+ *  built-in interrupt controller.
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_INTC_H_
+#define _ADM5120_INTC_H_
+
+/*
+ * INTC register offsets
+ */
+#define INTC_REG_IRQ_STATUS		0x00 /* Interrupt status after masking */
+#define INTC_REG_IRQ_RAW_STATUS		0x04 /* Interrupt status before masking */
+#define INTC_REG_IRQ_ENABLE		0x08 /* Used to enable the interrupt sources */
+#define INTC_REG_IRQ_ENABLE_CLEAR	0x0C /* Used to disable the interrupt sources */
+#define INTC_REG_IRQ_DISABLE		INTC_REG_IRQ_ENABLE_CLEAR
+#define INTC_REG_INT_MODE		0x14 /* The interrupt mode of the sources */
+#define INTC_REG_FIQ_STATUS		0x18 /* FIQ status */
+#define INTC_REG_IRQ_TEST_SOURCE	0x1C
+#define INTC_REG_IRQ_SOURCE_SELECT	0x20
+#define INTC_REG_INT_LEVEL		0x24
+
+/*
+ * INTC IRQ numbers
+ */
+#define INTC_IRQ_TIMER	0	/* built in timer */
+#define INTC_IRQ_UART0	1	/* built-in UART0 */
+#define INTC_IRQ_UART1	2	/* built-in UART1 */
+#define INTC_IRQ_USBC	3	/* USB Host Controller */
+#define INTC_IRQ_GPIO2	4	/* GPIO line 2 */
+#define INTC_IRQ_GPIO4	5	/* GPIO line 4 */
+#define INTC_IRQ_PCI0	6	/* PCI slot 2 */
+#define INTC_IRQ_PCI1	7	/* PCI slot 3 */
+#define INTC_IRQ_PCI2	8	/* PCI slot 4 */
+#define INTC_IRQ_SWITCH	9	/* built-in ethernet switch */
+#define INTC_IRQ_LAST	INTC_IRQ_SWITCH
+#define INTC_IRQ_COUNT	10
+
+/*
+ * INTC register bits
+ */
+#define INTC_INT_TIMER	( 1 << INTC_IRQ_TIMER )
+#define INTC_INT_UART0	( 1 << INTC_IRQ_UART0 )
+#define INTC_INT_UART1	( 1 << INTC_IRQ_UART1 )
+#define INTC_INT_USBC	( 1 << INTC_IRQ_USBC )
+#define INTC_INT_INTX0	( 1 << INTC_IRQ_INTX0 )
+#define INTC_INT_INTX1	( 1 << INTC_IRQ_INTX1 )
+#define INTC_INT_PCI0	( 1 << INTC_IRQ_PCI0 )
+#define INTC_INT_PCI1	( 1 << INTC_IRQ_PCI1 )
+#define INTC_INT_PCI2	( 1 << INTC_IRQ_PCI2 )
+#define INTC_INT_SWITCH	( 1 << INTC_IRQ_SWITCH )
+#define INTC_INT_ALL	(( 1 << INTC_IRQ_COUNT)-1)
+
+#endif /* _ADM5120_INTC_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h
new file mode 100644
index 0000000000..1b9e219891
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h
@@ -0,0 +1,55 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific IRQ numbers
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+#ifndef _ADM5120_IRQ_H_
+#define _ADM5120_IRQ_H_
+
+#include <asm/mach-adm5120/adm5120_intc.h>
+
+#define MIPS_IRQ_HW0		2
+#define MIPS_IRQ_COUNTER	7
+#define MIPS_IRQ_COUNT		8
+
+#define ADM5120_CPU_IRQ_BASE	0
+#define ADM5120_INTC_IRQ_BASE	(ADM5120_CPU_IRQ_BASE+MIPS_IRQ_COUNT)
+#define ADM5120_SWITCH_IRQ_BASE (ADM5120_INTC_IRQ_BASE+INTC_IRQ_COUNT)
+
+#define ADM5120_CPU_IRQ(x)	(ADM5120_CPU_IRQ_BASE + (x))
+#define ADM5120_INTC_IRQ(x)	(ADM5120_INTC_IRQ_BASE + (x))
+
+#define ADM5120_IRQ_INTC	ADM5120_CPU_IRQ(MIPS_IRQ_HW0)
+#define ADM5120_IRQ_COUNTER	ADM5120_CPU_IRQ(MIPS_IRQ_COUNTER)
+
+#define ADM5120_IRQ_TIMER	ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
+#define ADM5120_IRQ_UART0	ADM5120_INTC_IRQ(INTC_IRQ_UART0)
+#define ADM5120_IRQ_UART1	ADM5120_INTC_IRQ(INTC_IRQ_UART1)
+#define ADM5120_IRQ_USBC	ADM5120_INTC_IRQ(INTC_IRQ_USBC)
+#define ADM5120_IRQ_GPIO2	ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
+#define ADM5120_IRQ_GPIO4	ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
+#define ADM5120_IRQ_PCI0	ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
+#define ADM5120_IRQ_PCI1	ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
+#define ADM5120_IRQ_PCI2	ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
+#define ADM5120_IRQ_SWITCH	ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
+
+#endif
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h
new file mode 100644
index 0000000000..c821150c69
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h
@@ -0,0 +1,87 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 MPMC (Multiport Memory Controller) register definitions
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#ifndef _ADM5120_MPMC_H_
+#define _ADM5120_MPMC_H_
+
+#define MPMC_REG_CTRL	0x0000
+#define MPMC_REG_STATUS	0x0004
+#define MPMC_REG_CONF	0x0008
+#define MPMC_REG_DC	0x0020
+#define MPMC_REG_DR	0x0024
+#define MPMC_REG_DRP	0x0030
+
+#define MPMC_REG_DC0	0x0100
+#define MPMC_REG_DRC0	0x0104
+#define MPMC_REG_DC1	0x0120
+#define MPMC_REG_DRC1	0x0124
+#define MPMC_REG_DC2	0x0140
+#define MPMC_REG_DRC2	0x0144
+#define MPMC_REG_DC3	0x0160
+#define MPMC_REG_DRC3	0x0164
+#define MPMC_REG_SC0	0x0200  /* for F_CS1_N */
+#define MPMC_REG_SC1	0x0220  /* for F_CS0_N */
+#define MPMC_REG_SC2    0x0240
+#define MPMC_REG_SC3    0x0260
+
+#define MPMC_CTRL_AM		( 1 << 1 )
+
+/* Dynamic Control register bits */
+#define MPMC_DC_CE		( 1 << 0 )
+#define MPMC_DC_DMC		( 1 << 1 )
+#define MPMC_DC_SRR		( 1 << 2 )
+#define MPMC_DC_SI_SHIFT	7
+#define MPMC_DC_SI_MASK		( 3 << 7 )
+#define MPMC_DC_SI_NORMAL	( 0 << 7 )
+#define MPMC_DC_SI_MODE		( 1 << 7 )
+#define MPMC_DC_SI_PALL		( 2 << 7 )
+#define MPMC_DC_SI_NOP		( 3 << 7 )
+
+#define SRAM_REG_CONF	0x00
+#define SRAM_REG_WWE	0x04
+#define SRAM_REG_WOE	0x08
+#define SRAM_REG_WRD    0x0C
+#define SRAM_REG_WPG    0x10
+#define SRAM_REG_WWR    0x14
+#define SRAM_REG_WTR    0x18
+
+/* Dynamic Configuration register bits */
+#define DC_BE		(1 << 19) /* buffer enable */
+#define DC_RW_SHIFT	28	/* shift for number of rows */
+#define DC_RW_MASK	0x03
+#define DC_NB_SHIFT	26	/* shift for number of banks */
+#define DC_NB_MASK	0x01
+#define DC_CW_SHIFT	22	/* shift for number of columns */
+#define DC_CW_MASK	0x07
+#define DC_DW_SHIFT	7	/* shift for device width */
+#define DC_DW_MASK	0x03
+
+/* Static Configuration register bits */
+#define SC_MW_MASK	0x03	/* memory width mask */
+#define SC_MW_8		0x00	/* 8 bit memory width */
+#define SC_MW_16	0x01	/* 16 bit memory width */
+#define SC_MW_32	0x02	/* 32 bit memory width */
+
+#endif /* _ADM5120_MPMC_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h
new file mode 100644
index 0000000000..81c76170f6
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h
@@ -0,0 +1,85 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific platform definitions
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_PLATFORM_H_
+#define _ADM5120_PLATFORM_H_
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+
+struct adm5120_flash_platform_data {
+	void			(*set_vpp)(struct map_info *, int);
+	void			(*switch_bank)(unsigned);
+#ifdef CONFIG_MTD_PARTITIONS
+	unsigned int		nr_parts;
+	struct mtd_partition	*parts;
+#endif
+};
+
+struct adm5120_nand_platform_data {
+	/* TODO : not yet implemented */
+};
+
+struct adm5120_switch_platform_data {
+	/* TODO: not yet implemented */
+};
+
+struct adm5120_pci_irq {
+	u8	slot;
+	u8	func;
+	u8	pin;
+	unsigned irq;
+};
+
+struct adm5120_pci_platform_data {
+	unsigned int	nr_irqs;
+	struct adm5120_pci_irq	*irqs;
+};
+
+extern struct adm5120_flash_platform_data adm5120_flash0_data;
+extern struct adm5120_flash_platform_data adm5120_flash1_data;
+extern struct adm5120_nand_platform_data adm5120_nand_data;
+extern struct adm5120_pci_platform_data adm5120_pci_data;
+extern struct adm5120_switch_platform_data adm5120_switch_data;
+extern struct amba_pl010_data adm5120_uart0_data;
+extern struct amba_pl010_data adm5120_uart1_data;
+
+extern struct platform_device adm5120_flash0_device;
+extern struct platform_device adm5120_flash1_device;
+extern struct platform_device adm5120_nand_device;
+extern struct platform_device adm5120_usbc_device;
+extern struct platform_device adm5120_pci_device;
+extern struct platform_device adm5120_switch_device;
+extern struct amba_device adm5120_uart0_device;
+extern struct amba_device adm5120_uart1_device;
+
+
+#endif /* _ADM5120_PLATFORM_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
new file mode 100644
index 0000000000..eb06bfa602
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
@@ -0,0 +1,148 @@
+/*
+ *  ADM5120 ethernet switch definitions
+ *
+ *  This header file defines the hardware registers of the ADM5120 SoC
+ *  built-in Ethernet switch.
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_SWITCH_H
+#define _ADM5120_SWITCH_H
+
+#define BITMASK(len)	((1 << (len))-1)
+#define ONEBIT(at)	(1 << (at))
+
+/* Switch register offsets */
+#define SWITCH_REG_CODE		0x0000
+#define SWITCH_REG_SOFT_RESET	0x0004
+#define SWITCH_REG_MEMCTRL	0x001C
+#define SWITCH_REG_CPUP_CONF	0x0024
+#define SWITCH_REG_PORT_CONF0	0x0028
+#define SWITCH_REG_PORT_CONF1	0x002C
+#define SWITCH_REG_PORT_CONF2	0x0030
+#define SWITCH_REG_VLAN_G1	0x0040
+#define SWITCH_REG_VLAN_G2	0x0044
+#define SWITCH_REG_SEND_TRIG	0x0048
+#define SWITCH_REG_MAC_WT0	0x0058
+#define SWITCH_REG_MAC_WT1	0x005C
+#define SWITCH_REG_PHY_CNTL0	0x0068
+#define SWITCH_REG_PHY_CNTL1	0x006C
+#define SWITCH_REG_PHY_CNTL2	0x007C
+#define SWITCH_REG_PHY_CNTL3	0x0080
+#define SWITCH_REG_PRI_CNTL	0x0084
+#define SWITCH_REG_INT_STATUS	0x00B0
+#define SWITCH_REG_INT_MASK	0x00B4
+#define SWITCH_REG_GPIO_CONF0	0x00B8
+#define SWITCH_REG_GPIO_CONF2	0x00BC
+#define SWITCH_REG_WDOG0	0x00C0
+#define SWITCH_REG_WDOG1	0x00C4
+#define SWITCH_REG_PHY_CNTL4	0x00A0
+
+#define SWITCH_REG_SEND_HBADDR	0x00D0
+#define SWITCH_REG_SEND_LBADDR	0x00D4
+#define SWITCH_REG_RECV_HBADDR	0x00D8
+#define SWITCH_REG_RECV_LBADDR	0x00DC
+
+#define SWITCH_REG_TIMER_INT	0x00F0
+#define SWITCH_REG_TIMER	0x00F4
+
+#define SWITCH_REG_PORT0_LED	0x0100
+#define SWITCH_REG_PORT1_LED	0x0104
+#define SWITCH_REG_PORT2_LED	0x0108
+#define SWITCH_REG_PORT3_LED	0x010C
+#define SWITCH_REG_PORT4_LED	0x0110
+
+/* CODE register bits */
+#define CODE_PC_MASK		BITMASK(16)	/* Product Code */
+#define CODE_REV_SHIFT		16
+#define CODE_REV_MASK		BITMASK(4)	/* Product Revision */
+#define CODE_CLKS_SHIFT		20
+#define CODE_CLKS_MASK		BITMASK(2)	/* Clock Speed */
+#define CODE_CLKS_175		0		/* 175 MHz */
+#define CODE_CLKS_200		1		/* 200 MHz */
+#define CODE_CLKS_225		2		/* 225 MHz */
+#define CODE_CLKS_250		3		/* 250 MHz */
+#define CODE_NAB		ONEBIT(24)	/* NAND boot */
+#define CODE_PK_MASK		BITMASK(1)	/* Package type */
+#define CODE_PK_SHIFT		29
+#define CODE_PK_BGA		0		/* BGA package */
+#define CODE_PK_PQFP		1		/* PQFP package */
+
+/* MEMCTRL register bits */
+#define MEMCTRL_SDRS_MASK	BITMASK(3)	/* SDRAM bank size */
+#define MEMCTRL_SDRS_4M		0x01
+#define MEMCTRL_SDRS_8M		0x02
+#define MEMCTRL_SDRS_16M	0x03
+#define MEMCTRL_SDRS_64M	0x04
+#define MEMCTRL_SDRS_128M	0x05
+#define MEMCTRL_SDR1_ENABLE	ONEBIT(5)	/* enable SDRAM bank 1 */
+
+#define MEMCTRL_SRS0_SHIFT	8		/* shift for SRAM0 size */
+#define MEMCTRL_SRS1_SHIFT	16		/* shift for SRAM1 size */
+#define MEMCTRL_SRS_MASK	BITMASK(3)	/* SRAM size mask */
+#define MEMCTRL_SRS_DISABLED	0x00		/* Disabled */
+#define MEMCTRL_SRS_512K	0x01		/* 512KB*/
+#define MEMCTRL_SRS_1M		0x02		/* 1MB */
+#define MEMCTRL_SRS_2M		0x03		/* 2MB */
+#define MEMCTRL_SRS_4M		0x04		/* 4MB */
+
+/* GPIO_CONF0 register bits */
+#define GPIO_CONF0_MASK		BITMASK(8)
+#define GPIO_CONF0_IM_SHIFT	0
+#define GPIO_CONF0_IV_SHIFT	8
+#define GPIO_CONF0_OE_SHIFT	16
+#define GPIO_CONF0_OV_SHIFT	24
+#define GPIO_CONF0_IM_MASK	(0xFF << GPIO_CONF0_IM_SHIFT)
+#define GPIO_CONF0_IV_MASK	(0xFF << GPIO_CONF0_IV_SHIFT)
+#define GPIO_CONF0_OE_MASK	(0xFF << GPIO_CONF0_OE_SHIFT)
+#define GPIO_CONF0_OV_MASK	(0xFF << GPIO_CONF0_OV_SHIFT)
+
+/* TIMER_INT register bits */
+#define TIMER_INT_TOS		ONEBIT(1)	/* time-out status */
+#define TIMER_INT_TOM		ONEBIT(16)	/* mask time-out interrupt */
+
+/* TIMER register bits */
+#define TIMER_PERIOD_MASK	BITMASK(16)	/* mask for timer period */
+#define TIMER_PERIOD_DEFAULT	0xFFFF		/* default timer period */
+#define TIMER_TE		ONEBIT(16)	/* timer enable bit */
+
+/* PORTx_LED register bits */
+#define LED_MODE_MASK		BITMASK(4)
+#define LED_MODE_INPUT		0
+#define LED_MODE_FLASH		1
+#define LED_MODE_OUT_HIGH	2
+#define LED_MODE_OUT_LOW	3
+#define LED_MODE_LINK		4
+#define LED_MODE_SPEED		5
+#define LED_MODE_DUPLEX		6
+#define LED_MODE_ACT		7
+#define LED_MODE_COLL		8
+#define LED_MODE_LINK_ACT	9
+#define LED_MODE_DUPLEX_COLL	10
+#define LED_MODE_10M_ACT	11
+#define LED_MODE_100M_ACT	12
+#define LED0_MODE_SHIFT		0	/* LED0 mode shift */
+#define LED1_MODE_SHIFT		4	/* LED1 mode shift */
+#define LED2_MODE_SHIFT		8	/* LED2 mode shift */
+#define LED0_IV_SHIFT		12	/* LED0 input value shift */
+#define LED1_IV_SHIFT		13	/* LED1 input value shift */
+#define LED2_IV_SHIFT		14	/* LED2 input value shift */
+
+#endif /* _ADM5120_SWITCH_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h
new file mode 100755
index 0000000000..89c48dee5a
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h
@@ -0,0 +1,75 @@
+/*
+ *  ADM5120 UART definitions
+ *
+ *  This header file defines the hardware registers of the ADM5120 SoC
+ *  built-in UARTs.
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_UART_H_
+#define _ADM5120_UART_H_
+
+#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
+
+#define UART_REG_DATA	0x00
+#define UART_REG_RSR	0x04
+#define UART_REG_ECR	UART_REG_RSR
+#define UART_REG_LCRH	0x08
+#define UART_REG_LCRM	0x0C
+#define UART_REG_LCRL	0x10
+#define UART_REG_CTRL	0x14
+#define UART_REG_FLAG	0x18
+
+/* Receive Status Register bits */
+#define UART_RSR_FE	( 1 << 0 )
+#define UART_RSR_PE	( 1 << 1 )
+#define UART_RSR_BE	( 1 << 2 )
+#define UART_RSR_OE	( 1 << 3 )
+#define UART_RSR_ERR	( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE )
+
+#define UART_ECR_ALL	0xFF
+
+/* Line Control High register bits */
+#define UART_LCRH_BRK	( 1 << 0 ) /* send break */
+#define UART_LCRH_PEN	( 1 << 1 ) /* parity enable */
+#define UART_LCRH_EPS	( 1 << 2 ) /* even parity select */
+#define UART_LCRH_STP1	( 0 << 3 ) /* one stop bits select */
+#define UART_LCRH_STP2	( 1 << 3 ) /* two stop bits select */
+#define UART_LCRH_FEN	( 1 << 4 ) /* FIFO enable */
+
+#define UART_LCRH_WLEN5	( 0 << 5 )
+#define UART_LCRH_WLEN6	( 1 << 5 )
+#define UART_LCRH_WLEN7	( 2 << 5 )
+#define UART_LCRH_WLEN8	( 3 << 5 )
+
+/* Control register bits */
+#define UART_CTRL_EN	( 1 << 0 )
+
+/* Flag register bits */
+#define UART_FLAG_CTS	( 1 << 0 )
+#define UART_FLAG_DSR	( 1 << 1 )
+#define UART_FLAG_DCD	( 1 << 2 )
+#define UART_FLAG_BUSY	( 1 << 3 )
+#define UART_FLAG_RXFE	( 1 << 4 )
+#define UART_FLAG_TXFF	( 1 << 5 )
+#define UART_FLAG_RXFF	( 1 << 6 )
+#define UART_FLAG_TXFE	( 1 << 7 )
+
+#endif /* _ADM5120_UART_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h
new file mode 100644
index 0000000000..503843db15
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h
@@ -0,0 +1,56 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Size definitions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h                       1
+
+/* handy sizes */
+#define SZ_16				0x00000010
+#define SZ_256				0x00000100
+#define SZ_512				0x00000200
+
+#define SZ_1K                           0x00000400
+#define SZ_4K                           0x00001000
+#define SZ_8K                           0x00002000
+#define SZ_16K                          0x00004000
+#define SZ_64K                          0x00010000
+#define SZ_128K                         0x00020000
+#define SZ_256K                         0x00040000
+#define SZ_512K                         0x00080000
+
+#define SZ_1M                           0x00100000
+#define SZ_2M                           0x00200000
+#define SZ_4M                           0x00400000
+#define SZ_8M                           0x00800000
+#define SZ_16M                          0x01000000
+#define SZ_32M                          0x02000000
+#define SZ_64M                          0x04000000
+#define SZ_128M                         0x08000000
+#define SZ_256M                         0x10000000
+#define SZ_512M                         0x20000000
+
+#define SZ_1G                           0x40000000
+#define SZ_2G                           0x80000000
+
+#endif
+
+/*         END */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h
new file mode 100644
index 0000000000..6216b864f5
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h
@@ -0,0 +1,89 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 specific CPU feature overrides
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
+
+#ifdef CONFIG_ADM5120_CPU_OVERRIDES
+
+/*
+ * The ADM5120 SOC has a built-in MIPS 4Kc core.
+ */
+#define cpu_has_tlb			1
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_tx39_cache		0
+#define cpu_has_sb1_cache		0
+#define cpu_has_fpu			0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			1
+#define cpu_has_watch			1
+#define cpu_has_divec			1
+/* #define cpu_has_vce			? */
+/* #define cpu_has_cache_cdex_p		? */
+/* #define cpu_has_cache_cdex_s		? */
+#define cpu_has_prefetch		1
+/* #define cpu_has_mcheck		? */
+#define cpu_has_ejtag			1
+#define cpu_has_llsc			1
+
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+
+/* #define cpu_has_vtag_icache		? */
+/* #define cpu_has_dc_aliases		? */
+/* #define cpu_has_ic_fills_f_dc	? */
+/* #define cpu_has_pindexed_dcache	? */
+
+/* #define cpu_icache_snoops_remote_store	? */
+
+#define cpu_has_mips32r1		1
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+
+#define cpu_has_dsp			0
+#define cpu_has_mipsmt			0
+
+/* #define cpu_has_nofpuex		? */
+#define cpu_has_64bits			0
+#define cpu_has_64bit_zero_reg		0
+#define cpu_has_64bit_gp_regs		0
+#define cpu_has_64bit_addresses		0
+
+/* #define cpu_has_inclusive_pcaches	? */
+
+#define cpu_dcache_line_size()		16
+#define cpu_icache_line_size()		16
+
+#endif  /* CONFIG_ADM5120_CPU_OVERRIDES */
+
+
+#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h
new file mode 100644
index 0000000000..684d86cd41
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h
@@ -0,0 +1,126 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 GPIO wrappers for arch-neutral GPIO calls
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#ifndef _ADM5120_GPIO_H_
+#define _ADM5120_GPIO_H_
+
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+#define ADM5120_GPIO_PIN0	0
+#define ADM5120_GPIO_PIN1	1
+#define ADM5120_GPIO_PIN2	2
+#define ADM5120_GPIO_PIN3	3
+#define ADM5120_GPIO_PIN4	4
+#define ADM5120_GPIO_PIN5	5
+#define ADM5120_GPIO_PIN6	6
+#define ADM5120_GPIO_PIN7	7
+#define ADM5120_GPIO_P0L0	8
+#define ADM5120_GPIO_P0L1	9
+#define ADM5120_GPIO_P0L2	10
+#define ADM5120_GPIO_P1L0	11
+#define ADM5120_GPIO_P1L1	12
+#define ADM5120_GPIO_P1L2	13
+#define ADM5120_GPIO_P2L0	14
+#define ADM5120_GPIO_P2L1	15
+#define ADM5120_GPIO_P2L2	16
+#define ADM5120_GPIO_P3L0	17
+#define ADM5120_GPIO_P3L1	18
+#define ADM5120_GPIO_P3L2	19
+#define ADM5120_GPIO_P4L0	20
+#define ADM5120_GPIO_P4L1	21
+#define ADM5120_GPIO_P4L2	22
+#define ADM5120_GPIO_MAX	22
+#define ADM5120_GPIO_COUNT	ADM5120_GPIO_MAX+1
+
+#define ADM5120_GPIO_LOW	0
+#define ADM5120_GPIO_HIGH	1
+
+#define ADM5120_GPIO_SWITCH	0x10
+#define ADM5120_GPIO_FLASH	(ADM5120_GPIO_SWITCH | LED_MODE_FLASH)
+#define ADM5120_GPIO_LINK	(ADM5120_GPIO_SWITCH | LED_MODE_LINK)
+#define ADM5120_GPIO_SPEED	(ADM5120_GPIO_SWITCH | LED_MODE_SPEED)
+#define ADM5120_GPIO_DUPLEX	(ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX)
+#define ADM5120_GPIO_ACT	(ADM5120_GPIO_SWITCH | LED_MODE_ACT)
+#define ADM5120_GPIO_COLL	(ADM5120_GPIO_SWITCH | LED_MODE_COLL)
+#define ADM5120_GPIO_LINK_ACT	(ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT)
+#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL)
+#define ADM5120_GPIO_10M_ACT	(ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT)
+#define ADM5120_GPIO_100M_ACT	(ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT)
+
+extern int adm5120_gpio_direction_input(unsigned gpio);
+extern int adm5120_gpio_direction_output(unsigned gpio, int value);
+extern int adm5120_gpio_get_value(unsigned gpio);
+extern void adm5120_gpio_set_value(unsigned gpio, int value);
+extern int adm5120_gpio_request(unsigned gpio, const char *label);
+extern void adm5120_gpio_free(unsigned gpio);
+extern int adm5120_gpio_to_irq(unsigned gpio);
+extern int adm5120_irq_to_gpio(unsigned irq);
+
+/*
+ * Wrappers for the generic GPIO layer
+ */
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return adm5120_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return adm5120_gpio_direction_output(gpio,value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return adm5120_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	adm5120_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return adm5120_gpio_request(gpio, label);
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	adm5120_gpio_free(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return adm5120_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return adm5120_irq_to_gpio(irq);
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#endif
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h
new file mode 100644
index 0000000000..7d202361ac
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h
@@ -0,0 +1,31 @@
+/*
+ *  $Id$
+ *
+ *  Broadcom's CFE definitions
+ *
+ *  Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _PROM_CFE_H_
+#define _PROM_CFE_H_
+
+extern int cfe_present(void) __init;
+extern char *cfe_getenv(char *);
+
+#endif /*_PROM_CFE_H_*/
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h
new file mode 100644
index 0000000000..2cfa103672
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h
@@ -0,0 +1,31 @@
+/*
+ *  $Id$
+ *
+ *  Generic prom definitions
+ *
+ *  Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _PROM_GENERIC_H_
+#define _PROM_GENERIC_H_
+
+extern int generic_prom_present(void) __init;
+extern char *generic_prom_getenv(char *);
+
+#endif /*_PROM_GENERIC_H_*/
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h
new file mode 100644
index 0000000000..526de865c9
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h
@@ -0,0 +1,191 @@
+/*
+ *  $Id$
+ *
+ *  Compex's MyLoader specific definitions
+ *
+ *  Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007 OpenWrt.org
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/*
+ * Firmware file format:
+ *
+ *	<header>
+ *	[<block descriptor 0>]
+ *	...
+ *	[<block descriptor n>]
+ *	<null block descriptor>
+ *	[<block data 0>]
+ *	...
+ *	[<block data n>]
+ *
+ *
+ */
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_FIRMWARE	0x4C594D00
+#define MYLO_MAGIC_20021103	0x20021103
+#define MYLO_MAGIC_20021107	0x20021107
+
+#define MYLO_MAGIC_SYS_PARAMS	MYLO_MAGIC_20021107
+#define MYLO_MAGIC_PARTITIONS	MYLO_MAGIC_20021103
+#define MYLO_MAGIC_BOARD_PARAMS	MYLO_MAGIC_20021103
+
+/*
+ * Addresses of the data structures provided by MyLoader
+ */
+#define MYLO_MIPS_SYS_PARAMS	0x80000800	/* System Parameters */
+#define MYLO_MIPS_BOARD_PARAMS	0x80000A00	/* Board Parameters */
+#define MYLO_MIPS_PARTITIONS	0x80000C00	/* Partition Table */
+#define MYLO_MIPS_BOOT_PARAMS	0x80000E00	/* Boot Parameters */
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX		0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G	0x0078
+#define DEVID_COMPEX_NP28G	0x044C
+#define DEVID_COMPEX_NP28GHS	0x044E
+#define DEVID_COMPEX_WP54Gv1C	0x0514
+#define DEVID_COMPEX_WP54G	0x0515
+#define DEVID_COMPEX_WP54AG	0x0546
+#define DEVID_COMPEX_WPP54AG	0x0550
+#define DEVID_COMPEX_WPP54G	0x0555
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18	0x047E
+#define DEVID_COMPEX_NP18A	0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M	0x03E8
+#define DEVID_COMPEX_NP26G16M	0x03E9
+
+struct mylo_fw_header {
+	uint32_t	magic;	/* must be MYLO_MAGIC_FIRMWARE */
+	uint32_t	crc;	/* CRC of the whole firmware */
+	uint32_t	res0;	/* unknown/unused */
+	uint32_t	res1;	/* unknown/unused */
+	uint16_t	vid;	/* vendor ID */
+	uint16_t	did;	/* device ID */
+	uint16_t	svid;	/* sub vendor ID */
+	uint16_t	sdid;	/* sub device ID */
+	uint32_t	rev;	/* device revision */
+	uint32_t	fwhi;	/* FIXME: firmware version high? */
+	uint32_t	fwlo;	/* FIXME: firmware version low? */
+	uint32_t	flags;	/* firmware flags */
+};
+
+#define FW_FLAG_BOARD_PARAMS_WP	0x01 /* board parameters are write protected */
+#define FW_FLAG_BOOT_SECTOR_WE	0x02 /* enable of write boot sectors (below 64K) */
+
+struct mylo_fw_blockdesc {
+	uint32_t	type;	/* block type */
+	uint32_t	addr;	/* relative address to flash start */
+	uint32_t	dlen;	/* size of block data in bytes */
+	uint32_t	blen;	/* total size of block in bytes */
+};
+
+#define FW_DESC_TYPE_UNUSED	0
+#define FW_DESC_TYPE_USED	1
+
+struct mylo_partition {
+	uint16_t	flags;	/* partition flags */
+	uint16_t	type;	/* type of the partition */
+	uint32_t	addr;	/* relative address of the partition from the
+				   flash start */
+	uint32_t	size;	/* size of the partition in bytes */
+	uint32_t	param;	/* if this is the active partition, the
+				   MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE	0x8000 /* this is the active partition,
+					* MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM	0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD	0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD	0x0800 /* the partition data preloaded to RAM
+					* before decompression */
+#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE	0
+#define PARTITION_TYPE_USED	1
+
+#define MYLO_MAX_PARTITIONS	8	/* maximum number of partitions in the
+					   partition table */
+
+struct mylo_partition_table {
+	uint32_t	magic;	/* must be MYLO_MAGIC_PARTITIONS */
+	uint32_t	res0;	/* unknown/unused */
+	uint32_t	res1;	/* unknown/unused */
+	uint32_t 	res2;	/* unknown/unused */
+	struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+	uint32_t	len;	/* length of the partition data */
+	uint32_t	crc;	/* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_SYS_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	mylo_ver;
+	uint16_t	vid;	/* Vendor ID */
+	uint16_t	did;	/* Device ID */
+	uint16_t	svid;	/* Sub Vendor ID */
+	uint16_t	sdid;	/* Sub Device ID */
+	uint32_t	rev;	/* device revision */
+	uint32_t	fwhi;
+	uint32_t	fwlo;
+	uint32_t	tftp_addr;
+	uint32_t	prog_start;
+	uint32_t	flash_size;	/* Size of boot FLASH in bytes */
+	uint32_t	dram_size;	/* Size of onboard RAM in bytes */
+};
+
+
+struct mylo_eth_addr {
+	uint8_t	mac[6];
+	uint8_t	csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT	8	/* maximum number of ethernet address
+					   in the board parameters */
+
+struct mylo_board_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_BOARD_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	res2;
+	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+struct myloader_info {
+	u32	vid;
+	u32	did;
+	u32	svid;
+	u32	sdid;
+};
+
+extern struct myloader_info myloader_info;
+extern int myloader_present(void) __init;
+
+#endif /* _MYLOADER_H_*/
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h
new file mode 100644
index 0000000000..3c0898b3de
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h
@@ -0,0 +1,137 @@
+/*
+ *  $Id$
+ *
+ *  Mikrotik's RouterBOOT definitions
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ROUTERBOOT_H
+#define _ROUTERBOOT_H
+
+#define RB_MAC_SIZE		6
+#define RB_MAX_MAC_COUNT	6
+
+struct rb_bios_settings {
+	u32	hs_offs; /* hard settings offset */
+	u32	hs_size; /* hard settings size */
+	u32	fw_offs; /* firmware offset */
+	u32	ss_offs; /* soft settings offset */
+	u32	ss_size; /* soft settings size */
+};
+
+struct rb_hard_settings {
+	char	*name;		/* board name */
+	char	*bios_ver;	/* BIOS version */
+	u32	mem_size;	/* memory size in bytes */
+	u32	mac_count;	/* number of mac addresses */
+	u8	macs[RB_MAC_SIZE][RB_MAX_MAC_COUNT]; /* mac addresses */
+};
+
+/*
+ * Magic numbers
+ */
+#define RB_MAGIC_HARD	0x64726148 /* "Hard" */
+#define RB_MAGIC_SOFT	0x74666F53 /* "Soft" */
+#define RB_MAGIC_DAWN	0x6E776144 /* "Dawn" */
+
+#define RB_ID_TERMINATOR	0
+
+/*
+ * ID values for Hardware settings
+ */
+#define RB_ID_HARD_01		1
+#define RB_ID_HARD_02		2
+#define RB_ID_FLASH_INFO	3
+#define RB_ID_MAC_ADDRESS_PACK	4
+#define RB_ID_BOARD_NAME	5
+#define RB_ID_BIOS_VERSION	6
+#define RB_ID_HARD_07		7
+#define RB_ID_SDRAM_TIMINGS	8
+#define RB_ID_DEVICE_TIMINGS	9
+#define RB_ID_SOFTWARE_ID	10
+#define RB_ID_SERIAL_NUMBER	11
+#define RB_ID_HARD_12		12
+#define RB_ID_MEMORY_SIZE	13
+#define RB_ID_MAC_ADDRESS_COUNT	14
+
+/*
+ * ID values for Software settings
+ */
+#define RB_ID_UART_SPEED	1
+#define RB_ID_BOOT_DELAY	2
+#define RB_ID_BOOT_DEVICE	3
+#define RB_ID_BOOT_KEY		4
+#define RB_ID_CPU_MODE		5
+#define RB_ID_FW_VERSION	6
+#define RB_ID_SOFT_07		7
+#define RB_ID_SOFT_08		8
+#define RB_ID_BOOT_PROTOCOL	9
+#define RB_ID_SOFT_10		10
+#define RB_ID_SOFT_11		11
+
+/*
+ * UART_SPEED values
+ */
+#define RB_UART_SPEED_115200	0
+#define RB_UART_SPEED_57600	1
+#define RB_UART_SPEED_38400	2
+#define RB_UART_SPEED_19200	3
+#define RB_UART_SPEED_9600	4
+#define RB_UART_SPEED_4800	5
+#define RB_UART_SPEED_2400	6
+#define RB_UART_SPEED_1200	7
+
+/*
+ * BOOT_DELAY values
+ */
+#define RB_BOOT_DELAY_0SEC	0
+#define RB_BOOT_DELAY_1SEC	1
+#define RB_BOOT_DELAY_2SEC	2
+
+/*
+ * BOOT_DEVICE values
+ */
+#define RB_BOOT_DEVICE_ETHER	0
+#define RB_BOOT_DEVICE_NANDETH	1
+#define RB_BOOT_DEVICE_ETHONCE	2
+#define RB_BOOT_DEVICE_NANDONLY	3
+
+/*
+ * BOOT_KEY values
+ */
+#define RB_BOOT_KEY_ANY		0
+#define RB_BOOT_KEY_DEL		1
+
+/*
+ * CPU_MODE values
+ */
+#define RB_CPU_MODE_POWERSAVE	0
+#define RB_CPU_MODE_REGULAR	1
+
+/*
+ * BOOT_PROTOCOL values
+ */
+#define RB_BOOT_PROTOCOL_BOOTP	0
+#define RB_BOOT_PROTOCOL_DHCP	1
+
+extern int routerboot_present(void) __init;
+extern char *routerboot_get_boardname(void);
+
+#endif /* _ROUTERBOOT_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h
new file mode 100644
index 0000000000..e9471b5ad4
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h
@@ -0,0 +1,98 @@
+/*
+ *  $Id$
+ *
+ *  ZyNOS (ZyXEL's Networking OS) definitions
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ZYNOS_H
+#define _ZYNOS_H
+
+#define ZYNOS_NAME_LEN		32
+#define ZYNOS_FEAT_BYTES	22
+#define ZYNOS_MAC_LEN		6
+
+struct zynos_board_info {
+	unsigned char	vendor[ZYNOS_NAME_LEN];
+	unsigned char	product[ZYNOS_NAME_LEN];
+	u32		bootext_addr;
+	u32		res0;
+	u16		board_id;
+	u8		res1[6];
+	u8		feat_other[ZYNOS_FEAT_BYTES];
+	u8		feat_main;
+	u8		res2;
+	u8		mac[ZYNOS_MAC_LEN];
+	u8		country;
+	u8		dbgflag;
+} __attribute__ ((packed));
+
+/*
+ * Vendor IDs
+ */
+#define ZYNOS_VENDOR_ID_ZYXEL	0
+#define ZYNOS_VENDOR_ID_NETGEAR	1
+#define ZYNOS_VENDOR_ID_DLINK	2
+#define ZYNOS_VENDOR_ID_OTHER	3
+#define ZYNOS_VENDOR_ID_LUCENT	4
+
+/*
+ * Vendor names
+ */
+#define ZYNOS_VENDOR_DLINK	"D-Link"
+#define ZYNOS_VENDOR_LUCENT	"LUCENT"
+#define ZYNOS_VENDOR_NETGEAR	"NetGear"
+#define ZYNOS_VENDOR_ZYXEL	"ZyXEL"
+
+/*
+ * Board IDs (big-endian)
+ */
+#define ZYNOS_BOARD_ES2108	0x00F2	/* Ethernet Switch 2108 */
+#define ZYNOS_BOARD_ES2108F	0x01AF	/* Ethernet Switch 2108-F */
+#define ZYNOS_BOARD_ES2108G	0x00F3	/* Ethernet Switch 2108-G */
+#define ZYNOS_BOARD_ES2108LC	0x00FC	/* Ethernet Switch 2108-LC */
+#define ZYNOS_BOARD_ES2108PWR	0x00F4	/* Ethernet Switch 2108PWR */
+#define ZYNOS_BOARD_HS100	0x9FF1	/* HomeSafe 100/100W */
+#define ZYNOS_BOARD_P334	0x9FF5	/* Prestige 334 */
+#define ZYNOS_BOARD_P334U	0x9FDD	/* Prestige 334U */
+#define ZYNOS_BOARD_P334W	0x9FF3	/* Prestige 334W */
+#define ZYNOS_BOARD_P334WH	0x00E0	/* Prestige 334WH */
+#define ZYNOS_BOARD_P334WHD	0x00E1	/* Prestige 334WHD */
+#define ZYNOS_BOARD_P334WT	0x9FEF	/* Prestige 334WT */
+#define ZYNOS_BOARD_P335	0x9FED	/* Prestige 335/335WT */
+#define ZYNOS_BOARD_P335PLUS	0x0025	/* Prestige 335Plus */
+#define ZYNOS_BOARD_P335U	0x9FDC	/* Prestige 335U */
+
+/*
+ * Some magic numbers (big-endian)
+ */
+#define ZYNOS_MAGIC_DBGAREA1	0x48646267	/* "Hdbg" */
+#define ZYNOS_MAGIC_DBGAREA2	0x61726561	/* "area" */
+
+struct bootbase_info {
+	u16		vendor_id;
+	u16		board_id;
+	u8		mac[6];
+};
+
+extern struct bootbase_info bootbase_info;
+extern int bootbase_present(void) __init;
+
+#endif /* _ZYNOS_H */
diff --git a/target/linux/adm5120/files/include/linux/gpio_leds.h b/target/linux/adm5120/files/include/linux/gpio_leds.h
new file mode 100644
index 0000000000..5e78217b5f
--- /dev/null
+++ b/target/linux/adm5120/files/include/linux/gpio_leds.h
@@ -0,0 +1,37 @@
+/*
+ *  $Id$
+ *
+ *  GPIO LEDs platform data structure
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#ifndef _GPIO_LEDS_H_
+#define _GPIO_LEDS_H_
+
+struct gpio_led_platform_data {
+	char *name;
+	char *trigger;
+	unsigned gpio;	/* GPIO line number */
+	int value_off;	/* value to turn LED OFF */
+	int value_on;	/* value to turn LED ON */
+};
+
+#endif /* _GPIO_LEDS_H__ */
diff --git a/target/linux/adm5120/image/Makefile b/target/linux/adm5120/image/Makefile
new file mode 100644
index 0000000000..77b1c89754
--- /dev/null
+++ b/target/linux/adm5120/image/Makefile
@@ -0,0 +1,177 @@
+#
+# Copyright (C) 2006,2007 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+IMGNAME = $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)
+LOADER_MAKE = $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
+
+define Image/Build/Loader
+	$(LOADER_MAKE) LOADER=loader-$(1).$(2) LOADER_DATA="" \
+		LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \
+		CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \
+		compile loader.$(2)
+endef
+
+define Build/Clean
+	$(LOADER_MAKE) clean
+endef
+
+define Image/Prepare
+	cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+endef
+
+define trxalign/jffs2-128k
+-a 0x20000
+endef
+define trxalign/jffs2-64k
+-a 0x10000
+endef
+define trxalign/squashfs
+-a 1024
+endef
+
+define Image/Build/TRX
+	$(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(3) -f $(KDIR)/vmlinux.lzma \
+		$(call trxalign/$(2)) -f $(KDIR)/root.$(2)
+endef
+
+define Image/Build/TRXNoloader
+	$(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(KDIR)/vmlinux.lzma \
+		$(call trxalign/$(2)) -f $(KDIR)/root.$(2)
+endef
+
+define Image/Build/Compex
+	$(call Image/Build/Loader,$(2),gz,0x80500000,0,y,$(2))
+	$(call Image/Build/TRX,$(IMGNAME)-$(3)-$(2).trx,$(1),$(KDIR)/loader-$(2).gz)
+endef
+
+define Image/Build/Edimax
+	$(call Image/Build/Loader,$(2),gz,0x80500000,0x6D8,y,$(2))
+	$(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1))
+	$(STAGING_DIR_HOST)/bin/mkcsysimg -B $(2) -d -w \
+		-r $(KDIR)/loader-$(2).gz \
+		-x $(IMGNAME)-$(3)-$(2).trx \
+		$(IMGNAME)-$(3)-$(2).bin
+endef
+
+define Image/Build/Infineon
+	$(call Image/Build/Loader,$(2),gz,0x80500000,0x6D8,y,$(2))
+	$(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1))
+	dd if=$(KDIR)/loader-$(2).gz of=$(IMGNAME)-$(3)-$(2).img bs=64k conv=sync
+	cat $(IMGNAME)-$(3)-$(2).trx >>$(IMGNAME)-$(3)-$(2).img
+endef
+
+define Image/Build/MyLoader
+	$(call Image/Build/Loader,$(2),gz,0x80500000,0)
+	$(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1))
+	$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) \
+		-p0x20000:0x10000:ahp:0x80001000 \
+		-p0x30000:0 \
+		-b0x20000:0x10000:h:$(KDIR)/loader-$(2).gz \
+		-b0x30000:0::$(IMGNAME)-$(3)-$(2).trx \
+		$(IMGNAME)-$(3)-$(2).bin
+endef
+
+define Image/cmdline/yaffs2
+root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit
+endef
+
+define Image/Build/RouterBoard
+	$(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-rb1xx-vmlinux
+	$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/yaffs2)) '
+endef
+
+define Image/Build/jffs2-64k
+	$(call Image/Build/Compex,$(1),wp54g-wrt,$(patsubst jffs2-%,jffs2,$(1)))
+ifeq ($(CONFIG_DEVEL),y)
+	$(call Image/Build/Edimax,$(1),br-6104k,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),br-6104kp,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),br-6114wg,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),br-6524k,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),br-6524kp,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),br-6541k,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),br-6541kp,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),ew-7207apg,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),ps-1205uwg,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),ps-3205u,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),ps-3205uwg,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),br-6524wg,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Edimax,$(1),br-6524wp,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Infineon,$(1),easy-5120p-ata,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Infineon,$(1),easy-5120-rt,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Infineon,$(1),easy-5120-wvoip,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Infineon,$(1),easy-83000,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/MyLoader,$(1),np27g,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/MyLoader,$(1),np28g,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/MyLoader,$(1),np28ghs,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/MyLoader,$(1),wp54g,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/MyLoader,$(1),wp54ag,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/MyLoader,$(1),wpp54g,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/MyLoader,$(1),wpp54ag,$(patsubst jffs2-%,jffs2,$(1)))
+endif
+endef
+
+define Image/Build/squashfs
+$(call Image/Build/jffs2-64k,$(1))
+endef
+
+define Image/Build
+$(call Image/Build/$(1),$(1))
+endef
+
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+  define Image/BuildKernel
+	$(call Image/Build/RouterBoard)
+  endef
+endif
+
+define Image/Build/LZMAKernel
+	$(LOADER_MAKE) TARGET_DIR=$(BIN_DIR) \
+		LOADER=openwrt-$(BOARD)-$(KERNEL)-ramfs-lzma-$(1).$(2) \
+		LOADER_DATA=$(KDIR)/vmlinux.lzma \
+		LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \
+		CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \
+		compile loader.$(2)
+endef
+
+define Image/Build/LZMAKernel/Compex
+	$(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0,y,$(1))
+endef
+
+define Image/Build/LZMAKernel/Generic
+	$(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0)
+endef
+
+define Image/Build/LZMAKernel/Admboot
+	$(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0x6D8,y,$(1))
+endef
+
+define Image/Build/Initramfs/RouterBoard
+	$(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-ramfs-rb1xx.elf
+endef
+
+define Image/Build/Initramfs
+	$(call Image/Build/Initramfs/RouterBoard)
+	$(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin)
+ifeq ($(CONFIG_DEVEL),y)
+	$(call Image/Build/LZMAKernel/Generic,generic,bin)
+	$(call Image/Build/LZMAKernel/Generic,np27g,bin)
+	$(call Image/Build/LZMAKernel/Generic,wp54g,bin)
+	$(call Image/Build/LZMAKernel/Admboot,br-6104k,gz)
+	$(call Image/Build/LZMAKernel/Admboot,easy-5120,gz)
+	$(call Image/Build/LZMAKernel/Admboot,easy-83000,gz)
+	$(call Image/Build/LZMAKernel/Admboot,cas-630,gz)
+	$(call Image/Build/LZMAKernel/Admboot,cas-670,gz)
+	$(call Image/Build/LZMAKernel/Admboot,cas-700,gz)
+	$(call Image/Build/LZMAKernel/Admboot,cas-771,gz)
+	$(call Image/Build/LZMAKernel/Admboot,cas-790,gz)
+	$(call Image/Build/LZMAKernel/Admboot,cas-861,gz)
+endif
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/adm5120/image/lzma-loader/Makefile b/target/linux/adm5120/image/lzma-loader/Makefile
new file mode 100644
index 0000000000..74866e765e
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/Makefile
@@ -0,0 +1,63 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id$
+
+include $(TOPDIR)/rules.mk
+
+LOADER		:= loader.bin
+LOADER_NAME	:= $(basename $(notdir $(LOADER)))
+LOADER_DATA 	:=
+TARGET_DIR	:=
+
+ifeq ($(TARGET_DIR),)
+TARGET_DIR	:= $(KDIR)
+endif
+
+LOADER_BIN	:= $(TARGET_DIR)/$(LOADER_NAME).bin
+LOADER_GZ	:= $(TARGET_DIR)/$(LOADER_NAME).gz
+LOADER_ELF	:= $(TARGET_DIR)/$(LOADER_NAME).elf
+
+LZMA_STARTUP_ORG:= 0
+LZMA_TEXT_START	:= 0x80300000
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)
+
+.PHONY : loader-compile loader.bin loader.elf loader.gz
+
+$(PKG_BUILD_DIR)/.prepared:
+	mkdir $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+	touch $@
+
+loader-compile: $(PKG_BUILD_DIR)/.prepared
+	$(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
+		LZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG) \
+		LZMA_TEXT_START=$(LZMA_TEXT_START) \
+		LOADER_DATA=$(LOADER_DATA) \
+		CONFIG_BOARD=$(CONFIG_BOARD) \
+		CONFIG_PASS_KARGS=$(CONFIG_PASS_KARGS) \
+		clean all
+
+loader.gz: $(PKG_BUILD_DIR)/loader.bin
+	gzip -nc9 $< > $(LOADER_GZ)
+
+loader.elf: $(PKG_BUILD_DIR)/loader.elf
+	$(CP) $< $(LOADER_ELF)
+
+loader.bin: $(PKG_BUILD_DIR)/loader.bin
+	$(CP) $< $(LOADER_BIN)
+
+download:
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: loader-compile
+
+install:
+
+clean:
+	rm -rf $(PKG_BUILD_DIR)
+
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c
new file mode 100644
index 0000000000..75a358a9ee
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c
@@ -0,0 +1,589 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder (optimized for Speed version)
+  
+  LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this Code, expressly permits you to 
+  statically or dynamically link your Code (or bind by name) to the 
+  interfaces of this file without subjecting your linked Code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_READ_BYTE (*Buffer++)
+
+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
+  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
+
+#ifdef _LZMA_IN_CB
+
+#define RC_TEST { if (Buffer == BufferLim) \
+  { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
+  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
+
+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
+
+#else
+
+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
+
+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
+ 
+#endif
+
+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
+
+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
+
+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
+  { UpdateBit0(p); mi <<= 1; A0; } else \
+  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
+  
+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
+
+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
+  { int i = numLevels; res = 1; \
+  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
+  res -= (1 << numLevels); }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#ifdef _LZMA_OUT_READ
+
+typedef struct _LzmaVarState
+{
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  #ifdef _LZMA_IN_CB
+  ILzmaInCallback *InCallback;
+  #endif
+  Byte *Dictionary;
+  UInt32 DictionarySize;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 Reps[4];
+  int lc;
+  int lp;
+  int pb;
+  int State;
+  int RemainLen;
+  Byte TempDictionary[4];
+} LzmaVarState;
+
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *InCallback
+    #else
+    unsigned char *inStream, UInt32 inSize
+    #endif
+    )
+{
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  UInt32 i;
+  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  vs->Dictionary = dictionary;
+  vs->DictionarySize = dictionarySize;
+  vs->DictionaryPos = 0;
+  vs->GlobalPos = 0;
+  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
+  vs->lc = lc;
+  vs->lp = lp;
+  vs->pb = pb;
+  vs->State = 0;
+  vs->RemainLen = 0;
+  dictionary[dictionarySize - 1] = 0;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+
+  #ifdef _LZMA_IN_CB
+  RC_INIT;
+  #else
+  RC_INIT(inStream, inSize);
+  #endif
+  vs->Buffer = Buffer;
+  vs->BufferLim = BufferLim;
+  vs->Range = Range;
+  vs->Code = Code;
+  #ifdef _LZMA_IN_CB
+  vs->InCallback = InCallback;
+  #endif
+
+  return LZMA_RESULT_OK;
+}
+
+int LzmaDecode(unsigned char *buffer, 
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  Byte *Buffer = vs->Buffer;
+  Byte *BufferLim = vs->BufferLim;
+  UInt32 Range = vs->Range;
+  UInt32 Code = vs->Code;
+  #ifdef _LZMA_IN_CB
+  ILzmaInCallback *InCallback = vs->InCallback;
+  #endif
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  int state = vs->State;
+  Byte previousByte;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << (vs->pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
+  int lc = vs->lc;
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  Byte tempDictionary[4];
+  if (dictionarySize == 0)
+  {
+    dictionary = tempDictionary;
+    dictionarySize = 1;
+    tempDictionary[0] = vs->TempDictionary[0];
+  }
+
+  if (len == -1)
+  {
+    *outSizeProcessed = 0;
+    return LZMA_RESULT_OK;
+  }
+
+  while(len != 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+#else
+
+int LzmaDecode(
+    Byte *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *InCallback,
+    #else
+    unsigned char *inStream, UInt32 inSize,
+    #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  CProb *p = (CProb *)buffer;
+
+  UInt32 i;
+  int state = 0;
+  Byte previousByte = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << pb) - 1;
+  UInt32 literalPosMask = (1 << lp) - 1;
+  int len = 0;
+  
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  
+  if (bufferSize < numProbs * sizeof(CProb))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1;
+  
+
+  #ifdef _LZMA_IN_CB
+  RC_INIT;
+  #else
+  RC_INIT(inStream, inSize);
+  #endif
+#endif
+
+  *outSizeProcessed = 0;
+  while(nowPos < outSize)
+  {
+    CProb *prob;
+    UInt32 bound;
+    int posState = (int)(
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+
+    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
+    IfBit0(prob)
+    {
+      int symbol = 1;
+      UpdateBit0(prob)
+      prob = p + Literal + (LZMA_LIT_SIZE * 
+        (((
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state >= kNumLitStates)
+      {
+        int matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        // prob += 0x100;
+        do
+        {
+          int bit;
+          CProb *probLit;
+          matchByte <<= 1;
+          bit = (matchByte & 0x100);
+          probLit = prob + 0x100 + bit + symbol;
+          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
+        }
+        while (symbol < 0x100);
+        // prob -= 0x100;
+      }
+      while (symbol < 0x100)
+      {
+        CProb *probLit = prob + symbol;
+        RC_GET_BIT(probLit, symbol)
+      }
+      previousByte = (Byte)symbol;
+
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+    }
+    else             
+    {
+      // int isItRep;
+      UpdateBit1(prob);
+      prob = p + IsRep + state;
+      IfBit0(prob)
+      {
+        UpdateBit0(prob);
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < kNumLitStates ? 0 : 3;
+        prob = p + LenCoder;
+      }
+      else
+      {
+        UpdateBit1(prob);
+        prob = p + IsRepG0 + state;
+        IfBit0(prob)
+        {
+          UpdateBit0(prob);
+          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
+          IfBit0(prob)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            UpdateBit0(prob);
+            if (nowPos 
+                #ifdef _LZMA_OUT_READ
+                + globalPos
+                #endif
+                == 0)
+              return LZMA_RESULT_DATA_ERROR;
+            state = state < kNumLitStates ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            continue;
+          }
+          else
+          {
+            UpdateBit1(prob);
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          UpdateBit1(prob);
+          prob = p + IsRepG1 + state;
+          IfBit0(prob)
+          {
+            UpdateBit0(prob);
+            distance = rep1;
+          }
+          else 
+          {
+            UpdateBit1(prob);
+            prob = p + IsRepG2 + state;
+            IfBit0(prob)
+            {
+              UpdateBit0(prob);
+              distance = rep2;
+            }
+            else
+            {
+              UpdateBit1(prob);
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        state = state < kNumLitStates ? 8 : 11;
+        prob = p + RepLenCoder;
+      }
+      {
+        int numBits, offset;
+        CProb *probLen = prob + LenChoice;
+        IfBit0(probLen)
+        {
+          UpdateBit0(probLen);
+          probLen = prob + LenLow + (posState << kLenNumLowBits);
+          offset = 0;
+          numBits = kLenNumLowBits;
+        }
+        else
+        {
+          UpdateBit1(probLen);
+          probLen = prob + LenChoice2;
+          IfBit0(probLen)
+          {
+            UpdateBit0(probLen);
+            probLen = prob + LenMid + (posState << kLenNumMidBits);
+            offset = kLenNumLowSymbols;
+            numBits = kLenNumMidBits;
+          }
+          else
+          {
+            UpdateBit1(probLen);
+            probLen = prob + LenHigh;
+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
+            numBits = kLenNumHighBits;
+          }
+        }
+        RangeDecoderBitTreeDecode(probLen, numBits, len);
+        len += offset;
+      }
+
+      if (state < 4)
+      {
+        int posSlot;
+        state += kNumLitStates;
+        prob = p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
+            kNumPosSlotBits);
+        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = (2 | ((UInt32)posSlot & 1));
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 <<= numDirectBits;
+            prob = p + SpecPos + rep0 - posSlot - 1;
+          }
+          else
+          {
+            numDirectBits -= kNumAlignBits;
+            do
+            {
+              RC_NORMALIZE
+              Range >>= 1;
+              rep0 <<= 1;
+              if (Code >= Range)
+              {
+                Code -= Range;
+                rep0 |= 1;
+              }
+            }
+            while (--numDirectBits != 0);
+            prob = p + Align;
+            rep0 <<= kNumAlignBits;
+            numDirectBits = kNumAlignBits;
+          }
+          {
+            int i = 1;
+            int mi = 1;
+            do
+            {
+              CProb *prob3 = prob + mi;
+              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
+              i <<= 1;
+            }
+            while(--numDirectBits != 0);
+          }
+        }
+        else
+          rep0 = posSlot;
+        if (++rep0 == (UInt32)(0))
+        {
+          /* it's for stream version */
+          len = -1;
+          break;
+        }
+      }
+
+      len += kMatchMinLen;
+      if (rep0 > nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos || rep0 > dictionarySize
+        #endif
+        ) 
+        return LZMA_RESULT_DATA_ERROR;
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        len--;
+        outStream[nowPos++] = previousByte;
+      }
+      while(len != 0 && nowPos < outSize);
+    }
+  }
+  RC_NORMALIZE;
+
+  #ifdef _LZMA_OUT_READ
+  vs->Buffer = Buffer;
+  vs->BufferLim = BufferLim;
+  vs->Range = Range;
+  vs->Code = Code;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + nowPos;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->RemainLen = len;
+  vs->TempDictionary[0] = tempDictionary[0];
+  #endif
+
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h
new file mode 100644
index 0000000000..53677350ae
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h
@@ -0,0 +1,100 @@
+/* 
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs, 
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+/* 
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
+bufferSize += 100 in case of _LZMA_OUT_READ
+by default CProb is unsigned short, 
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
+*/
+
+#ifdef _LZMA_OUT_READ
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    unsigned char *inStream, UInt32 inSize
+  #endif
+);
+#endif
+
+int LzmaDecode(
+    unsigned char *buffer, 
+  #ifndef _LZMA_OUT_READ
+    UInt32 bufferSize,
+    int lc, int lp, int pb,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+  #else
+    unsigned char *inStream, UInt32 inSize,
+  #endif
+  #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed);
+
+#endif
diff --git a/target/linux/adm5120/image/lzma-loader/src/Makefile b/target/linux/adm5120/image/lzma-loader/src/Makefile
new file mode 100644
index 0000000000..a553b7fdef
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/Makefile
@@ -0,0 +1,99 @@
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+#
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004  Manuel Novoa III <mjn3@codepoet.org>
+#   Modified to support bzip'd kernels.
+#   Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005  Oleg I. Vdovikin <oleg@cs.msu.su>
+#   Cleaned up, modified for lzma support, removed from kernel
+#
+# Copyright 2007 Gabor Juhos <juhosg at openwrt.org>
+#   Modified to support user defined entry point address.
+#   Added support for make targets with different names
+#
+
+LOADADDR	:= 0x80001000
+LZMA_TEXT_START	:= 0x80500000
+LZMA_STARTUP_ORG:= 0
+LOADER_DATA	:=
+CONFIG_PASS_KARGS :=
+CONFIG_BOARD	:=
+
+CC		:= $(CROSS_COMPILE)gcc
+LD		:= $(CROSS_COMPILE)ld
+OBJCOPY		:= $(CROSS_COMPILE)objcopy
+OBJDUMP		:= $(CROSS_COMPILE)objdump
+
+BIN_FLAGS	:= -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS		= -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+		  -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+		  -ffunction-sections -pipe -mlong-calls -fno-common \
+		  -ffreestanding \
+		  -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS		+= -DLOADADDR=$(LOADADDR)
+
+ASFLAGS		= $(CFLAGS) -D__ASSEMBLY__ -DLZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG)
+
+LDFLAGS		= -static --gc-sections -no-warn-mismatch
+LDFLAGS		+= -e startup -T loader.lds -Ttext $(LZMA_TEXT_START)
+
+O_FORMAT 	= $(shell $(OBJDUMP) -i | head -2 | grep elf32)
+
+OBJECTS		:= head.o decompress.o board.o printf.o LzmaDecode.o
+
+ifneq ($(strip $(LOADER_DATA)),)
+OBJECTS		+= data.o
+CFLAGS		+= -DLZMA_WRAPPER=1
+else
+CFLAGS		+= -D_LZMA_IN_CB
+endif
+
+ifneq ($(strip $(CONFIG_PASS_KARGS)),)
+CFLAGS		+= -DCONFIG_PASS_KARGS
+endif
+
+BOARD_DEF := $(strip $(CONFIG_BOARD))
+BOARD_DEF := $(shell echo $(BOARD_DEF) | tr a-z A-Z | tr -d -)
+ifneq ($(BOARD_DEF),)
+CFLAGS		+= -DCONFIG_BOARD_$(BOARD_DEF)
+endif
+
+all: loader.bin
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c -o $@ $<
+
+%.o : %.S
+	$(CC) $(ASFLAGS) -c -o $@ $<
+
+data.o: $(LOADER_DATA)
+	$(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
+
+loader.bin: loader.elf
+	$(OBJCOPY) $(BIN_FLAGS) $< $@
+
+loader.elf: $(OBJECTS)
+	$(LD) $(LDFLAGS) -o $@ $(OBJECTS)
+
+mrproper: clean
+
+clean:
+	rm -f *.elf *.bin *.o
+
+
+
diff --git a/target/linux/adm5120/image/lzma-loader/src/README b/target/linux/adm5120/image/lzma-loader/src/README
new file mode 100644
index 0000000000..16649e9500
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/README
@@ -0,0 +1,55 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions: 
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+                /* Try looking at TRX header for rootfs offset */
+                if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+                        bcm947xx_parts[1].offset = off;
+-                       if (le32_to_cpu(trx->offsets[1]) > off)
++                       if (le32_to_cpu(trx->offsets[2]) > off)
++                               off = le32_to_cpu(trx->offsets[2]);
++                       else if (le32_to_cpu(trx->offsets[1]) > off)
+                                off = le32_to_cpu(trx->offsets[1]);
+                        continue;
+                }
+
+
+Revision history:
+	0.02	Initial release
+	0.03	Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+		output size to decoder (stream mode compressed input is not 
+		a requirement anymore)
+	0.04	Reordered functions using lds script
diff --git a/target/linux/adm5120/image/lzma-loader/src/board.c b/target/linux/adm5120/image/lzma-loader/src/board.c
new file mode 100644
index 0000000000..22317f9683
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/board.c
@@ -0,0 +1,178 @@
+/*
+ * ADM5120 specific board support for LZMA decompressor
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stddef.h>
+
+#define READREG(r)	*(volatile unsigned int *)(r)
+#define WRITEREG(r,v)	*(volatile unsigned int *)(r) = v
+
+/*
+ * INTC definitions
+ */
+#define INTC_BASE	0xB2200000
+
+/* INTC registers */
+#define INTC_REG_IRQ_DISABLE	0x0C
+
+/*
+ * UART definitions
+ */
+#define UART_BASE	0xB2600000
+/* UART registers */
+#define UART_REG_DATA	0x00	/* Data register */
+#define UART_REG_ECR	0x04	/* Error Clear register */
+#define UART_REG_LCRH	0x08	/* Line Control High register */
+#define UART_REG_LCRM	0x0C	/* Line Control Middle register */
+#define UART_REG_LCRL	0x10	/* Line Control Low register */
+#define UART_REG_CTRL	0x14	/* Control register */
+#define UART_REG_FLAG   0x18	/* Flag register */
+
+/* Control register bits */
+#define UART_CTRL_EN	( 1 << 0 )	/* UART enable */
+
+/* Line Control High register bits */
+#define UART_LCRH_FEN	( 1 << 4 )	/* FIFO enable */
+
+/* Flag register bits */
+#define UART_FLAG_CTS	( 1 << 0 )
+#define UART_FLAG_DSR	( 1 << 1 )
+#define UART_FLAG_DCD	( 1 << 2 )
+#define UART_FLAG_BUSY	( 1 << 3 )
+#define UART_FLAG_RXFE	( 1 << 4 )	/* RX FIFO empty */
+#define UART_FLAG_TXFF	( 1 << 5 )	/* TX FIFO full */
+#define UART_FLAG_RXFF	( 1 << 6 )	/* RX FIFO full */
+#define UART_FLAG_TXFE	( 1 << 7 )	/* TX FIFO empty */
+
+/*
+ * SWITCH definitions
+ */
+#define SWITCH_BASE	0xB2000000
+
+#define SWITCH_REG_CPUP_CONF	0x0024
+#define SWITCH_REG_PORT_CONF0	0x0028
+
+#define SWITCH_REG_GPIO_CONF0	0x00B8
+#define SWITCH_REG_GPIO_CONF2	0x00BC
+
+#define SWITCH_REG_PORT0_LED	0x0100
+#define SWITCH_REG_PORT1_LED	0x0104
+#define SWITCH_REG_PORT2_LED	0x0108
+#define SWITCH_REG_PORT3_LED	0x010C
+#define SWITCH_REG_PORT4_LED	0x0110
+
+#define SWITCH_PORTS_HW		0x3F		/* Hardware Ports */
+
+/* CPUP_CONF register bits */
+#define CPUP_CONF_DCPUP		( 1 << 0 )	/* Disable CPU port */
+
+/* PORT_CONF0 register bits */
+#define PORT_CONF0_DP_SHIFT	0	/* disable port shift*/
+
+
+/*
+ * UART routines
+ */
+
+#define UART_READ(r)	READREG(UART_BASE+(r))
+#define UART_WRITE(r,v)	WRITEREG(UART_BASE+(r),(v))
+
+static void uart_init(void)
+{
+#if 0
+	unsigned int t;
+
+	/* disable uart */
+	UART_WRITE(UART_REG_CTRL, 0);
+
+	/* keep current baud rate */
+	t = UART_READ(UART_REG_LCRM);
+	UART_WRITE(UART_REG_LCRM, t);
+	t = UART_READ(UART_REG_LCRL);
+	UART_WRITE(UART_REG_LCRL, t);
+
+	/* keep data, stop, and parity bits, but disable FIFO */
+	t = UART_READ(UART_REG_LCRH);
+	t &= ~(UART_LCRH_FEN);
+	UART_WRITE(UART_REG_LCRH, t );
+
+	/* clear error bits */
+	UART_WRITE(UART_REG_ECR, 0xFF);
+
+	/* enable uart, and disable interrupts */
+	UART_WRITE(UART_REG_CTRL, UART_CTRL_EN);
+#endif
+}
+
+/*
+ * INTC routines
+ */
+
+#define INTC_READ(r)	READREG(INTC_BASE+(r))
+#define INTC_WRITE(r,v)	WRITEREG(INTC_BASE+(r),v)
+
+static void intc_init(void)
+{
+	INTC_WRITE(INTC_REG_IRQ_DISABLE, 0xFFFFFFFF);
+}
+
+/*
+ * SWITCH routines
+ */
+
+#define SWITCH_READ(r)		READREG(SWITCH_BASE+(r))
+#define SWITCH_WRITE(r,v)	WRITEREG(SWITCH_BASE+(r),v)
+
+static void switch_init(void)
+{
+	/* disable PHYS ports */
+	SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
+	    (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT));
+
+	/* disable CPU port */
+	SWITCH_WRITE(SWITCH_REG_CPUP_CONF, CPUP_CONF_DCPUP);
+
+	/* disable GPIO lines */
+	SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0);
+	SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0);
+
+	/* disable LED lines */
+	SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0);
+	SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0);
+	SWITCH_WRITE(SWITCH_REG_PORT2_LED, 0);
+	SWITCH_WRITE(SWITCH_REG_PORT3_LED, 0);
+	SWITCH_WRITE(SWITCH_REG_PORT4_LED, 0);
+}
+
+void board_putc(int ch)
+{
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+
+	UART_WRITE(UART_REG_DATA, ch);
+
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+}
+
+void board_init(void)
+{
+	intc_init();
+	switch_init();
+	uart_init();
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/config.h b/target/linux/adm5120/image/lzma-loader/src/config.h
new file mode 100644
index 0000000000..310189c6d6
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/config.h
@@ -0,0 +1,119 @@
+#ifndef _CONFIG_H_
+#define _CONFIG_H_
+
+#define FLASH_2M	(2<<20)
+#define FLASH_4M	(4<<20)
+
+/*
+ * Cellvision/SparkLAN boards
+ */
+
+#if defined(CONFIG_BOARD_CAS630)
+#  define CONFIG_BOARD_NAME	"CAS-630"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS670)
+#  define CONFIG_BOARD_NAME	"CAS-670"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS700)
+#  define CONFIG_BOARD_NAME	"CAS-700"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS790)
+#  define CONFIG_BOARD_NAME	"CAS-790"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS771)
+#  define CONFIG_BOARD_NAME	"CAS-771"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_CAS861)
+#  define CONFIG_BOARD_NAME	"CAS-861"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_NFS101U)
+#  define CONFIG_BOARD_NAME	"NFS-101U"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_NFS202U)
+#  define CONFIG_BOARD_NAME	"NFS-202U"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+/*
+ * Compex boards
+ */
+#if defined(CONFIG_BOARD_WP54GWRT)
+#  define CONFIG_BOARD_NAME	"WP54G-WRT"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+/*
+ * Edimax boards
+ */
+#if defined(CONFIG_BOARD_BR6104K)
+#  define CONFIG_BOARD_NAME	"BR-6104K"
+#  define CONFIG_FLASH_SIZE	FLASH_2M
+#endif
+
+#if defined(CONFIG_BOARD_BR6104KP)
+#  define CONFIG_BOARD_NAME	"BR-6104KP"
+#  define CONFIG_FLASH_SIZE	FLASH_2M
+#endif
+
+/*
+ * Infineon boards
+ */
+#if defined(CONFIG_BOARD_EASY5120PATA)
+#  define CONFIG_BOARD_NAME	"EASY 5120P-ATA"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_EASY5120RT)
+#  define CONFIG_BOARD_NAME	"EASY 5120-RT"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_EASY5120WVOIP)
+#  define CONFIG_BOARD_NAME	"EASY 5120-WVOIP"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_EASY83000)
+#  define CONFIG_BOARD_NAME	"EASY 83000"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+/*
+ * ZyXEL boards
+ */
+#if defined(CONFIG_BOARD_P334WT)
+#  define CONFIG_BOARD_NAME	"P-334WT"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+#if defined(CONFIG_BOARD_P335)
+#  define CONFIG_BOARD_NAME	"P-335"
+#  define CONFIG_FLASH_SIZE	FLASH_4M
+#endif
+
+/*
+ * Default values
+ */
+#ifndef CONFIG_BOARD_NAME
+#  define CONFIG_BOARD_NAME	"ADM5120"
+#endif
+
+#ifndef CONFIG_FLASH_SIZE
+#  define CONFIG_FLASH_SIZE	FLASH_2M
+#endif
+
+#endif /* _CONFIG_H_ */
diff --git a/target/linux/adm5120/image/lzma-loader/src/decompress.c b/target/linux/adm5120/image/lzma-loader/src/decompress.c
new file mode 100644
index 0000000000..9e2a04c994
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/decompress.c
@@ -0,0 +1,349 @@
+/*
+ * $Id$
+ *
+ * LZMA compressed kernel decompressor for ADM5120 boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III  (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005  Mineharu Takahara <mtakahar@yahoo.com>
+ *   pass actual output size to decoder (stream mode
+ *   compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ *   reordered functions using lds script, removed forward decl
+ *
+ * 24-Mar-2007 Gabor Juhos
+ *   pass original values of the a0,a1,a2,a3 registers to the kernel
+ *
+ * 19-May-2007 Gabor Juhos
+ *   endiannes related cleanups
+ *   add support for decompressing an embedded kernel
+ *
+ */
+
+#include <stddef.h>
+
+#include "config.h"
+#include "printf.h"
+#include "LzmaDecode.h"
+
+#define ADM5120_FLASH_START	0x1fc00000	/* Flash start */
+#define ADM5120_FLASH_END	0x1fe00000	/* Flash end */
+
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+
+#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+#define cache_unroll(base,op)	\
+	__asm__ __volatile__(		\
+		".set noreorder;\n"		\
+		".set mips3;\n"			\
+		"cache %1, (%0);\n"		\
+		".set mips0;\n"			\
+		".set reorder\n"		\
+		:				\
+		: "r" (base),			\
+		  "i" (op));
+
+#ifdef LZMA_DEBUG
+#  define DBG(f, a...)	printf(f, ## a)
+#else
+#  define DBG(f, a...)	do {} while (0)
+#endif
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Invalidate_I);
+		start += lsize;
+	}
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Writeback_Inv_D);
+		start += lsize;
+	}
+}
+
+#define TRX_MAGIC       0x30524448      /* "HDR0" */
+#define TRX_ALIGN	0x1000
+
+struct trx_header {
+	unsigned int magic;		/* "HDR0" */
+	unsigned int len;		/* Length of file including header */
+	unsigned int crc32;		/* 32-bit CRC from flag_version to end of file */
+	unsigned int flag_version;	/* 0:15 flags, 16:31 version */
+	unsigned int offsets[3];	/* Offsets of partitions from start of header */
+};
+
+struct env_var {
+	char	*name;
+	char	*value;
+};
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+extern void board_init(void);
+
+typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1,
+	unsigned long reg_a2, unsigned long reg_a3);
+
+static int decompress_data(unsigned char *buffer, UInt32 bufferSize,
+	int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize,
+	UInt32 *outSizeProcessed);
+
+#ifdef CONFIG_PASS_KARGS
+#define ENVV(n,v)	{.name = (n), .value = (v)}
+struct env_var env_vars[] = {
+	ENVV("board_name",	CONFIG_BOARD_NAME),
+	ENVV(NULL, NULL)
+};
+#endif
+
+static void halt(void)
+{
+	printf("\nSystem halted!\n");
+	for(;;);
+}
+
+#if LZMA_WRAPPER
+extern unsigned char _lzma_data_start[];
+extern unsigned char _lzma_data_end[];
+
+unsigned char *data;
+unsigned long datalen;
+
+static __inline__ unsigned char get_byte(void)
+{
+	datalen--;
+	return *data++;
+}
+
+static void decompress_init(void)
+{
+	data = _lzma_data_start;
+	datalen = _lzma_data_end - _lzma_data_start;
+}
+
+static int decompress_data(unsigned char *buffer, UInt32 bufferSize,
+	int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize,
+	UInt32 *outSizeProcessed)
+{
+	return LzmaDecode(buffer, bufferSize, lc, lp, pb, data, datalen,
+		outStream, outSize, outSizeProcessed);
+}
+#endif /* LZMA_WRAPPER */
+
+#if !(LZMA_WRAPPER)
+
+#define FLASH_BANK_SIZE	(2<<20)
+
+static unsigned char *flash_base = (unsigned char *) KSEG1ADDR(ADM5120_FLASH_START);
+static unsigned long flash_ofs = 0;
+static unsigned long flash_max = 0;
+static unsigned long flash_ofs_mask = (FLASH_BANK_SIZE-1);
+
+static __inline__ unsigned char get_byte(void)
+{
+	return *(flash_base+flash_ofs++);
+}
+
+static int lzma_read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+	unsigned long len;
+
+	if (flash_ofs >= flash_max)
+		return LZMA_RESULT_DATA_ERROR;
+
+	len = flash_max-flash_ofs;
+
+#if (CONFIG_FLASH_SIZE > FLASH_BANK_SIZE)
+	if (flash_ofs < FLASH_BANK_SIZE) {
+		/* switch to bank 0 */
+		DBG("lzma_read_byte: switch to bank 0\n");
+
+		if (len > FLASH_BANK_SIZE-flash_ofs)
+			len = FLASH_BANK_SIZE-flash_ofs;
+	} else {
+		/* switch to bank 1 */
+		DBG("lzma_read_byte: switch to bank 1\n");
+	}
+#endif
+	DBG("lzma_read_byte: ofs=%08X, len=%08X\n", flash_ofs, len);
+
+	*buffer = flash_base+(flash_ofs & flash_ofs_mask);
+	*bufferSize = len;
+	flash_ofs += len;
+
+	return LZMA_RESULT_OK;
+}
+
+static ILzmaInCallback lzma_callback = {
+	.Read	= lzma_read_byte,
+};
+
+static __inline__ unsigned int read_le32(void *buf)
+{
+	unsigned char *p = buf;
+
+	return ((unsigned int)p[0] + ((unsigned int)p[1] << 8) +
+		((unsigned int)p[2] << 16) +((unsigned int)p[3] << 24));
+}
+
+static void decompress_init(void)
+{
+	struct trx_header *hdr = NULL;
+	unsigned long kofs,klen;
+
+    	printf("Looking for TRX header... ");
+	/* look for trx header, 32-bit data access */
+	for (flash_ofs = 0; flash_ofs < FLASH_BANK_SIZE; flash_ofs += TRX_ALIGN) {
+		if (read_le32(&flash_base[flash_ofs]) == TRX_MAGIC) {
+			hdr = (struct trx_header *)&flash_base[flash_ofs];
+			break;
+		}
+	}
+
+	if (hdr == NULL) {
+		printf("not found!\n");
+		/* no compressed kernel found, halting */
+		halt();
+	}
+
+	/* compressed kernel is in the partition 0 or 1 */
+	kofs = read_le32(&hdr->offsets[1]);
+	if (kofs == 0 || kofs > 65536) {
+		klen = kofs-read_le32(&hdr->offsets[0]);
+		kofs = read_le32(&hdr->offsets[0]);
+	} else {
+		klen = read_le32(&hdr->offsets[2]);
+		if (klen > kofs)
+			klen -= kofs;
+		else
+			klen = read_le32(&hdr->len)-kofs;
+	}
+
+	printf("found at %08X, kernel:%08X len:%08X\n", flash_ofs,
+		kofs, klen);
+
+	flash_ofs += kofs;
+	flash_max = flash_ofs+klen;
+}
+
+static int decompress_data(unsigned char *buffer, UInt32 bufferSize,
+	int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize,
+	UInt32 *outSizeProcessed)
+{
+	return LzmaDecode(buffer, bufferSize, lc, lp, pb, &lzma_callback,
+		outStream, outSize, outSizeProcessed);
+}
+#endif /* !(LZMA_WRAPPER) */
+
+/* should be the first function */
+void decompress_entry(unsigned long reg_a0, unsigned long reg_a1,
+	unsigned long reg_a2, unsigned long reg_a3,
+	unsigned long icache_size, unsigned long icache_lsize,
+	unsigned long dcache_size, unsigned long dcache_lsize)
+{
+	unsigned int i;  /* temp value */
+	unsigned int lc; /* literal context bits */
+	unsigned int lp; /* literal pos state bits */
+	unsigned int pb; /* pos state bits */
+	unsigned int osize; /* uncompressed size */
+	int res;
+
+	board_init();
+
+	printf("\n\nLZMA loader for " CONFIG_BOARD_NAME
+			", Copyright (C) 2007 OpenWrt.org\n\n");
+
+	decompress_init();
+
+	/* lzma args */
+	i = get_byte();
+	lc = i % 9, i = i / 9;
+	lp = i % 5, pb = i / 5;
+
+	/* skip rest of the LZMA coder property */
+	for (i = 0; i < 4; i++)
+		get_byte();
+
+	/* read the lower half of uncompressed size in the header */
+	osize = ((unsigned int)get_byte()) +
+		((unsigned int)get_byte() << 8) +
+		((unsigned int)get_byte() << 16) +
+		((unsigned int)get_byte() << 24);
+
+	/* skip rest of the header (upper half of uncompressed size) */
+	for (i = 0; i < 4; i++)
+		get_byte();
+
+	printf("decompressing kernel... ");
+
+	/* decompress kernel */
+	res = decompress_data(workspace, ~0, lc, lp, pb,
+		(unsigned char *)LOADADDR, osize, &i);
+
+	if (res != LZMA_RESULT_OK) {
+		printf("failed, ");
+		switch (res) {
+		case LZMA_RESULT_DATA_ERROR:
+			printf("data error!\n");
+			break;
+		case LZMA_RESULT_NOT_ENOUGH_MEM:
+			printf("not enough memory!\n");
+			break;
+		default:
+			printf("unknown error %d!\n", res);
+		}
+		halt();
+	} else
+		printf("done!\n");
+
+	blast_dcache(dcache_size, dcache_lsize);
+	blast_icache(icache_size, icache_lsize);
+
+	printf("launching kernel...\n\n");
+
+#ifdef CONFIG_PASS_KARGS
+	reg_a0 = 0;
+	reg_a1 = 0;
+	reg_a2 = (unsigned long)env_vars;
+	reg_a3 = 0;
+#endif
+	/* Jump to load address */
+	((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3);
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/head.S b/target/linux/adm5120/image/lzma-loader/src/head.S
new file mode 100644
index 0000000000..ee8b3200cf
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/head.S
@@ -0,0 +1,209 @@
+/* Copyright 2007 Gabor Juhos <juhosg@freemail.hu>	*/
+/* keep original values of the a0,a1,a2,a3 registers	*/
+/* modifed to support user defined entry point address	*/
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su)	*/
+/* cache manipulation adapted from Broadcom code 	*/
+/* idea taken from original bunzip2 decompressor code	*/
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org)	*/
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0		0x80000000
+
+#define C0_STATUS	$12
+#define C0_CAUSE	$13
+#define C0_CONFIG	$16
+#define C0_WATCHLO	$18
+#define C0_WATCHHI	$19
+#define C0_TAGLO	$28
+#define C0_TAGHI	$29
+
+#define	CONF1_DA_SHIFT	7			/* D$ associativity */
+#define CONF1_DA_MASK	0x00000380
+#define CONF1_DA_BASE	1
+#define CONF1_DL_SHIFT	10			/* D$ line size */
+#define CONF1_DL_MASK	0x00001c00
+#define CONF1_DL_BASE	2
+#define CONF1_DS_SHIFT	13			/* D$ sets/way */
+#define CONF1_DS_MASK	0x0000e000
+#define CONF1_DS_BASE	64
+#define CONF1_IA_SHIFT	16			/* I$ associativity */
+#define CONF1_IA_MASK	0x00070000
+#define CONF1_IA_BASE	1
+#define CONF1_IL_SHIFT	19			/* I$ line size */
+#define CONF1_IL_MASK	0x00380000
+#define CONF1_IL_BASE	2
+#define CONF1_IS_SHIFT	22			/* Instruction cache sets/way */
+#define CONF1_IS_MASK	0x01c00000
+#define CONF1_IS_BASE	64
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+	.text
+
+#if (LZMA_STARTUP_ORG)
+	.set	noreorder
+
+	b	startup
+	nop
+
+	.org	LZMA_STARTUP_ORG
+#endif
+
+LEAF(startup)
+	.set noreorder
+	.set mips32
+	
+	mtc0	zero, C0_WATCHLO	# clear watch registers
+	mtc0	zero, C0_WATCHHI
+
+	mtc0	zero, C0_CAUSE		# clear before writing status register
+
+	mfc0	t0, C0_STATUS		# get status register
+	li	t1, ~(0xFF01)
+	and	t0, t1			# mask interrupts
+	mtc0	t0, C0_STATUS		# set up status register
+
+	move	t1, ra			# save return address
+	la	t0, __reloc_label	# get linked address of label
+	bal	__reloc_label		# branch and link to label to
+	nop				# get actual address
+__reloc_label:
+	subu	t0, ra, t0		# get reloc_delta
+	move	ra, t1			# restore return address
+
+	beqz	t0, __reloc_end         # if delta is 0 we are in the right place
+	nop
+
+	/* Copy our code to the right place */
+	la	t1, _code_start		# get linked address of _code_start
+	la	t2, _code_end		# get linked address of _code_end
+	addu	t0, t0, t1		# calculate actual address of _code_start
+
+__reloc_copy:
+	lw	t3, 0(t0)
+	sw	t3, 0(t1)
+	add	t1, 4
+	blt	t1, t2, __reloc_copy
+	add	t0, 4
+
+__reloc_end:
+
+	/* At this point we need to invalidate dcache and */
+	/* icache before jumping to new code */
+
+1:	/* Get cache sizes */
+	.set	mips32
+	mfc0	s0,C0_CONFIG,1
+	.set	mips0
+
+	li	s1,CONF1_DL_MASK
+	and	s1,s0
+	beq	s1,zero,nodc
+	nop
+
+	srl	s1,CONF1_DL_SHIFT
+	li	t0,CONF1_DL_BASE
+	sll	s1,t0,s1		/* s1 has D$ cache line size */
+
+	li	s2,CONF1_DA_MASK
+	and	s2,s0
+	srl	s2,CONF1_DA_SHIFT
+	addiu	s2,CONF1_DA_BASE	/* s2 now has D$ associativity */
+
+	li	t0,CONF1_DS_MASK
+	and	t0,s0
+	srl	t0,CONF1_DS_SHIFT
+	li	s3,CONF1_DS_BASE
+	sll	s3,s3,t0		/* s3 has D$ sets per way */
+
+	multu	s2,s3			/* sets/way * associativity */
+	mflo	t0			/* total cache lines */
+
+	multu	s1,t0			/* D$ linesize * lines */
+	mflo	s2			/* s2 is now D$ size in bytes */
+
+	/* Initilize the D$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s2		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Writeback_Inv_D,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s1
+
+nodc:
+	/* Now we get to do it all again for the I$ */
+
+	move	s3,zero			/* just in case there is no icache */
+	move	s4,zero
+
+	li	t0,CONF1_IL_MASK
+	and	t0,s0
+	beq	t0,zero,noic
+	nop
+
+	srl	t0,CONF1_IL_SHIFT
+	li	s3,CONF1_IL_BASE
+	sll	s3,t0			/* s3 has I$ cache line size */
+
+	li	t0,CONF1_IA_MASK
+	and	t0,s0
+	srl	t0,CONF1_IA_SHIFT
+	addiu	s4,t0,CONF1_IA_BASE	/* s4 now has I$ associativity */
+
+	li	t0,CONF1_IS_MASK
+	and	t0,s0
+	srl	t0,CONF1_IS_SHIFT
+	li	s5,CONF1_IS_BASE
+	sll	s5,t0			/* s5 has I$ sets per way */
+
+	multu	s4,s5			/* sets/way * associativity */
+	mflo	t0			/* s4 is now total cache lines */
+
+	multu	s3,t0			/* I$ linesize * lines */
+	mflo	s4			/* s4 is cache size in bytes */
+
+	/* Initilize the I$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s4		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Invalidate_I,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s3
+
+noic:
+	/* Setup new "C" stack */
+	la	sp, _stack
+
+	addiu	sp, -32			/* reserve stack for parameters */
+#if 0
+	sw	a0, 0(sp)
+	sw	a1, 4(sp)
+	sw	a2, 8(sp)
+	sw	a3, 12(sp)
+#endif
+	sw	s3, 16(sp)		/* icache line size */
+	sw	s4, 20(sp)		/* icache size */
+	sw	s1, 24(sp)		/* dcache line size */
+	sw	s2, 28(sp)		/* dcache size */
+
+	/* jump to the decompressor routine */
+	la	t0, decompress_entry
+	jr	t0
+	nop
+
+	.set reorder
+END(startup)
diff --git a/target/linux/adm5120/image/lzma-loader/src/loader.lds b/target/linux/adm5120/image/lzma-loader/src/loader.lds
new file mode 100644
index 0000000000..bae70fb6ea
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/loader.lds
@@ -0,0 +1,29 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+	.text : {
+		_code_start = .;
+		*(.text)
+		*(.text.*)
+		*(.rodata)
+		*(.rodata.*)
+		. = ALIGN(16);
+		*(.data.lzma)
+	}
+
+	.data : {
+		*(.data)
+		*(.data.*)
+	}
+	_code_end = .;
+
+	.bss : {
+		*(.bss)
+		*(.bss.*)
+	}
+
+	. = ALIGN(16);
+	. = . + 8192;
+	_stack = .;
+
+	workspace = .;
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds b/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds
new file mode 100644
index 0000000000..abf756ba13
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds
@@ -0,0 +1,8 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+	.data.lzma : {
+		_lzma_data_start = .;
+		*(.data)
+		_lzma_data_end = .;
+	}
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.c b/target/linux/adm5120/image/lzma-loader/src/printf.c
new file mode 100644
index 0000000000..7bb5a86e18
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/printf.c
@@ -0,0 +1,350 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include	"printf.h"
+
+extern void board_putc(int ch);
+
+/* this is the maximum width for a variable */
+#define		LP_MAX_BUF	256
+
+/* macros */
+#define		IsDigit(x)	( ((x) >= '0') && ((x) <= '9') )
+#define		Ctod(x)		( (x) - '0')
+
+/* forward declaration */
+static int PrintChar(char *, char, int, int);
+static int PrintString(char *, char *, int, int);
+static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
+
+/* private variable */
+static const char theFatalMsg[] = "fatal error in lp_Print!";
+
+/* -*-
+ * A low level printf() function.
+ */
+static void
+lp_Print(void (*output)(void *, char *, int),
+	 void * arg,
+	 char *fmt,
+	 va_list ap)
+{
+
+#define 	OUTPUT(arg, s, l)  \
+  { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
+       (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
+    } else { \
+      (*output)(arg, s, l); \
+    } \
+  }
+
+    char buf[LP_MAX_BUF];
+
+    char c;
+    char *s;
+    long int num;
+
+    int longFlag;
+    int negFlag;
+    int width;
+    int prec;
+    int ladjust;
+    char padc;
+
+    int length;
+
+    for(;;) {
+	{
+	    /* scan for the next '%' */
+	    char *fmtStart = fmt;
+	    while ( (*fmt != '\0') && (*fmt != '%')) {
+		fmt ++;
+	    }
+
+	    /* flush the string found so far */
+	    OUTPUT(arg, fmtStart, fmt-fmtStart);
+
+	    /* are we hitting the end? */
+	    if (*fmt == '\0') break;
+	}
+
+	/* we found a '%' */
+	fmt ++;
+
+	/* check for long */
+	if (*fmt == 'l') {
+	    longFlag = 1;
+	    fmt ++;
+	} else {
+	    longFlag = 0;
+	}
+
+	/* check for other prefixes */
+	width = 0;
+	prec = -1;
+	ladjust = 0;
+	padc = ' ';
+
+	if (*fmt == '-') {
+	    ladjust = 1;
+	    fmt ++;
+	}
+
+	if (*fmt == '0') {
+	    padc = '0';
+	    fmt++;
+	}
+
+	if (IsDigit(*fmt)) {
+	    while (IsDigit(*fmt)) {
+		width = 10 * width + Ctod(*fmt++);
+	    }
+	}
+
+	if (*fmt == '.') {
+	    fmt ++;
+	    if (IsDigit(*fmt)) {
+		prec = 0;
+		while (IsDigit(*fmt)) {
+		    prec = prec*10 + Ctod(*fmt++);
+		}
+	    }
+	}
+
+
+	/* check format flag */
+	negFlag = 0;
+	switch (*fmt) {
+	 case 'b':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'd':
+	 case 'D':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    if (num < 0) {
+		num = - num;
+		negFlag = 1;
+	    }
+	    length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'o':
+	 case 'O':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'u':
+	 case 'U':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'x':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'X':
+	    if (longFlag) {
+		num = va_arg(ap, long int);
+	    } else {
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'c':
+	    c = (char)va_arg(ap, int);
+	    length = PrintChar(buf, c, width, ladjust);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 's':
+	    s = (char*)va_arg(ap, char *);
+	    length = PrintString(buf, s, width, ladjust);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case '\0':
+	    fmt --;
+	    break;
+
+	 default:
+	    /* output this char as it is */
+	    OUTPUT(arg, fmt, 1);
+	}	/* switch (*fmt) */
+
+	fmt ++;
+    }		/* for(;;) */
+
+    /* special termination call */
+    OUTPUT(arg, "\0", 1);
+}
+
+
+/* --------------- local help functions --------------------- */
+static int
+PrintChar(char * buf, char c, int length, int ladjust)
+{
+    int i;
+
+    if (length < 1) length = 1;
+    if (ladjust) {
+	*buf = c;
+	for (i=1; i< length; i++) buf[i] = ' ';
+    } else {
+	for (i=0; i< length-1; i++) buf[i] = ' ';
+	buf[length - 1] = c;
+    }
+    return length;
+}
+
+static int
+PrintString(char * buf, char* s, int length, int ladjust)
+{
+    int i;
+    int len=0;
+    char* s1 = s;
+    while (*s1++) len++;
+    if (length < len) length = len;
+
+    if (ladjust) {
+	for (i=0; i< len; i++) buf[i] = s[i];
+	for (i=len; i< length; i++) buf[i] = ' ';
+    } else {
+	for (i=0; i< length-len; i++) buf[i] = ' ';
+	for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
+    }
+    return length;
+}
+
+static int
+PrintNum(char * buf, unsigned long u, int base, int negFlag,
+	 int length, int ladjust, char padc, int upcase)
+{
+    /* algorithm :
+     *  1. prints the number from left to right in reverse form.
+     *  2. fill the remaining spaces with padc if length is longer than
+     *     the actual length
+     *     TRICKY : if left adjusted, no "0" padding.
+     *		    if negtive, insert  "0" padding between "0" and number.
+     *  3. if (!ladjust) we reverse the whole string including paddings
+     *  4. otherwise we only reverse the actual string representing the num.
+     */
+
+    int actualLength =0;
+    char *p = buf;
+    int i;
+
+    do {
+	int tmp = u %base;
+	if (tmp <= 9) {
+	    *p++ = '0' + tmp;
+	} else if (upcase) {
+	    *p++ = 'A' + tmp - 10;
+	} else {
+	    *p++ = 'a' + tmp - 10;
+	}
+	u /= base;
+    } while (u != 0);
+
+    if (negFlag) {
+	*p++ = '-';
+    }
+
+    /* figure out actual length and adjust the maximum length */
+    actualLength = p - buf;
+    if (length < actualLength) length = actualLength;
+
+    /* add padding */
+    if (ladjust) {
+	padc = ' ';
+    }
+    if (negFlag && !ladjust && (padc == '0')) {
+	for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
+	buf[length -1] = '-';
+    } else {
+	for (i = actualLength; i< length; i++) buf[i] = padc;
+    }
+
+
+    /* prepare to reverse the string */
+    {
+	int begin = 0;
+	int end;
+	if (ladjust) {
+	    end = actualLength - 1;
+	} else {
+	    end = length -1;
+	}
+
+	while (end > begin) {
+	    char tmp = buf[begin];
+	    buf[begin] = buf[end];
+	    buf[end] = tmp;
+	    begin ++;
+	    end --;
+	}
+    }
+
+    /* adjust the string pointer */
+    return length;
+}
+
+static void printf_output(void *arg, char *s, int l)
+{
+    int i;
+
+    // special termination call
+    if ((l==1) && (s[0] == '\0')) return;
+
+    for (i=0; i< l; i++) {
+	board_putc(s[i]);
+	if (s[i] == '\n') board_putc('\r');
+    }
+}
+
+void printf(char *fmt, ...)
+{
+    va_list ap;
+    va_start(ap, fmt);
+    lp_Print(printf_output, 0, fmt, ap);
+    va_end(ap);
+}
diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.h b/target/linux/adm5120/image/lzma-loader/src/printf.h
new file mode 100644
index 0000000000..9b1c1df232
--- /dev/null
+++ b/target/linux/adm5120/image/lzma-loader/src/printf.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _printf_h_
+#define _printf_h_
+
+#include <stdarg.h>
+void printf(char *fmt, ...);
+
+#endif /* _printf_h_ */
diff --git a/target/linux/adm5120/patches-2.6.22/001-adm5120.patch b/target/linux/adm5120/patches-2.6.22/001-adm5120.patch
new file mode 100644
index 0000000000..14cb612b08
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/001-adm5120.patch
@@ -0,0 +1,114 @@
+Index: linux-2.6.22.1/arch/mips/Kconfig
+===================================================================
+--- linux-2.6.22.1.orig/arch/mips/Kconfig
++++ linux-2.6.22.1/arch/mips/Kconfig
+@@ -15,6 +15,18 @@ choice
+ 	prompt "System type"
+ 	default SGI_IP22
+ 
++config MIPS_ADM5120
++	bool "Support for ADM5120 SoC"
++	select SYS_HAS_CPU_MIPS32_R1
++	select SYS_HAS_EARLY_PRINTK
++	select DMA_NONCOHERENT
++	select HW_HAS_PCI
++	select IRQ_CPU
++	select SYS_SUPPORTS_LITTLE_ENDIAN
++	select SYS_SUPPORTS_BIG_ENDIAN
++	select SYS_SUPPORTS_32BIT_KERNEL
++	select GENERIC_GPIO
++
+ config MACH_ALCHEMY
+ 	bool "Alchemy processor based machines"
+ 
+@@ -658,6 +670,7 @@ config TOSHIBA_RBTX4938
+ 
+ endchoice
+ 
++source "arch/mips/adm5120/Kconfig"
+ source "arch/mips/au1000/Kconfig"
+ source "arch/mips/ddb5xxx/Kconfig"
+ source "arch/mips/gt64120/ev64120/Kconfig"
+Index: linux-2.6.22.1/arch/mips/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/arch/mips/Makefile
++++ linux-2.6.22.1/arch/mips/Makefile
+@@ -165,6 +165,16 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
+ load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
+ 
+ #
++# ADMtek 5120
++#
++
++libs-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/prom/
++core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/
++core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/boards/
++cflags-$(CONFIG_MIPS_ADM5120)	+= -Iinclude/asm-mips/mach-adm5120
++load-$(CONFIG_MIPS_ADM5120)	+= 0xffffffff80001000
++
++#
+ # Common Alchemy Au1x00 stuff
+ #
+ core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
+Index: linux-2.6.22.1/include/asm-mips/bootinfo.h
+===================================================================
+--- linux-2.6.22.1.orig/include/asm-mips/bootinfo.h
++++ linux-2.6.22.1/include/asm-mips/bootinfo.h
+@@ -213,6 +213,57 @@
+ #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
+ #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
+ 
++/*
++ * Valid machtype for group ADMtek ADM5120
++ */
++#define MACH_GROUP_ADM5120	26
++#define MACH_ADM5120_GENERIC	0	/* Generic board */
++#define MACH_ADM5120_WP54G_WRT	1	/* Compex WP54G-WRT */
++#define MACH_ADM5120_WP54G	2	/* Compex WP54G */
++#define MACH_ADM5120_WP54AG	3	/* Compex WP54AG */
++#define MACH_ADM5120_WPP54G	4	/* Compex WPP54G */
++#define MACH_ADM5120_WPP54AG	5	/* Compex WPP54AG */
++#define MACH_ADM5120_NP28G	6	/* Compex NP28G */
++#define MACH_ADM5120_NP28GHS	7	/* Compex NP28G HotSpot */
++#define MACH_ADM5120_NP27G	8	/* Compex NP27G */
++#define MACH_ADM5120_WP54Gv1C	9	/* Compex WP54G version 1C */
++#define MACH_ADM5120_RB_111	10	/* Mikrotik RouterBOARD 111 */
++#define MACH_ADM5120_RB_112	11	/* Mikrotik RouterBOARD 112 */
++#define MACH_ADM5120_RB_133	12	/* Mikrotik RouterBOARD 133 */
++#define MACH_ADM5120_RB_133C	13	/* Mikrotik RouterBOARD 133c */
++#define MACH_ADM5120_RB_150	14	/* Mikrotik RouterBOARD 150 */
++#define MACH_ADM5120_RB_153	15	/* Mikrotik RouterBOARD 153 */
++#define MACH_ADM5120_HS100	16	/* ZyXEL HomeSafe 100/100W */
++#define MACH_ADM5120_P334	17	/* ZyXEL Prestige 334 */
++#define MACH_ADM5120_P334U	18	/* ZyXEL Prestige 334U */
++#define MACH_ADM5120_P334W	19	/* ZyXEL Prestige 334W */
++#define MACH_ADM5120_P334WH	20	/* ZyXEL Prestige 334WH */
++#define MACH_ADM5120_P334WHD	21	/* ZyXEL Prestige 334WHD */
++#define MACH_ADM5120_P334WT	22	/* ZyXEL Prestige 334WT */
++#define MACH_ADM5120_P335	23	/* ZyXEL Prestige 335/335WT */
++#define MACH_ADM5120_P335PLUS	24	/* ZyXEL Prestige 335Plus */
++#define MACH_ADM5120_P335U	25	/* ZyXEL Prestige 335U */
++#define MACH_ADM5120_ES2108	26	/* ZyXEL Ethernet Switch 2108 */
++#define MACH_ADM5120_ES2108F	27	/* ZyXEL Ethernet Switch 2108-F */
++#define MACH_ADM5120_ES2108G	28	/* ZyXEL Ethernet Switch 2108-G */
++#define MACH_ADM5120_ES2108LC	29	/* ZyXEL Ethernet Switch 2108-LC */
++#define MACH_ADM5120_ES2108PWR	30	/* ZyXEL Ethernet Switch 2108-PWR */
++#define MACH_ADM5120_ES2024A	31	/* ZyXEL Ethernet Switch 2024A */
++#define MACH_ADM5120_ES2024PWR	32	/* ZyXEL Ethernet Switch 2024PWR */
++#define MACH_ADM5120_CAS630	33	/* Cellvision CAS-630/630W */
++#define MACH_ADM5120_CAS670	34	/* Cellvision CAS-670/670W */
++#define MACH_ADM5120_CAS700	36	/* Cellvision CAS-700/700W */
++#define MACH_ADM5120_CAS771	37	/* Cellvision CAS-771/771W */
++#define MACH_ADM5120_CAS790	38	/* Cellvision CAS-790 */
++#define MACH_ADM5120_CAS861	39	/* Cellvision CAS-861/861W */
++#define MACH_ADM5120_NFS101U	40	/* Cellvision NFS-101U/101WU */
++#define MACH_ADM5120_NFS202U	41	/* Cellvision NFS-202U/202WU */
++#define MACH_ADM5120_EASY5120PATA 42	/* Infineon EASY 5120P-ATA */
++#define MACH_ADM5120_EASY5120RT 43	/* Infineon EASY 5120-RT */
++#define MACH_ADM5120_EASY5120WVOIP 44	/* Infineon EASY 5120-WVoIP */
++#define MACH_ADM5120_EASY83000	45	/* Infineon EASY-83000 */
++#define MACH_ADM5120_BR6104K	46	/* Edimax BR-6104K */
++
+ #define CL_SIZE			COMMAND_LINE_SIZE
+ 
+ const char *get_system_type(void);
diff --git a/target/linux/adm5120/patches-2.6.22/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.22/002-adm5120_flash.patch
new file mode 100644
index 0000000000..e2f21bfc4c
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/002-adm5120_flash.patch
@@ -0,0 +1,26 @@
+Index: linux-2.6.22.1/drivers/mtd/maps/Kconfig
+===================================================================
+--- linux-2.6.22.1.orig/drivers/mtd/maps/Kconfig
++++ linux-2.6.22.1/drivers/mtd/maps/Kconfig
+@@ -620,5 +620,9 @@ config MTD_PLATRAM
+ 
+ 	  This selection automatically selects the map_ram driver.
+ 
++config MTD_ADM5120
++	tristate "Map driver for ADM5120 based boards"
++	depends on MIPS_ADM5120
++
+ endmenu
+ 
+Index: linux-2.6.22.1/drivers/mtd/maps/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/drivers/mtd/maps/Makefile
++++ linux-2.6.22.1/drivers/mtd/maps/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI)		+= pci.o
+ obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
++obj-$(CONFIG_MTD_ADM5120)      	+= adm5120-flash.o
+ obj-$(CONFIG_MTD_LASAT)		+= lasat.o
+ obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
diff --git a/target/linux/adm5120/patches-2.6.22/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.22/003-adm5120_switch.patch
new file mode 100644
index 0000000000..ff8a9bbc29
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/003-adm5120_switch.patch
@@ -0,0 +1,27 @@
+Index: linux-2.6.22.1/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.22.1.orig/drivers/net/Kconfig
++++ linux-2.6.22.1/drivers/net/Kconfig
+@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
+ 	  If you have an Alchemy Semi AU1X00 based system
+ 	  say Y.  Otherwise, say N.
+ 
++config MIPS_ADM5120_ENET
++	tristate "MIPS ADM5120 Ethernet switch support"
++	depends on NET_ETHERNET && MIPS_ADM5120
++
+ config NET_SB1250_MAC
+ 	tristate "SB1250 Ethernet support"
+ 	depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+Index: linux-2.6.22.1/drivers/net/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/drivers/net/Makefile
++++ linux-2.6.22.1/drivers/net/Makefile
+@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+ # This is also a 82596 and should probably be merged
+ obj-$(CONFIG_LP486E) += lp486e.o
+ 
++obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
+ obj-$(CONFIG_ETH16I) += eth16i.o
+ obj-$(CONFIG_ZORRO8390) += zorro8390.o
+ obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120/patches-2.6.22/004-adm5120_nand.patch b/target/linux/adm5120/patches-2.6.22/004-adm5120_nand.patch
new file mode 100644
index 0000000000..79915e0281
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/004-adm5120_nand.patch
@@ -0,0 +1,29 @@
+Index: linux-2.6.22.1/drivers/mtd/nand/Kconfig
+===================================================================
+--- linux-2.6.22.1.orig/drivers/mtd/nand/Kconfig
++++ linux-2.6.22.1/drivers/mtd/nand/Kconfig
+@@ -81,6 +81,12 @@ config MTD_NAND_TS7250
+ 	help
+ 	  Support for NAND flash on Technologic Systems TS-7250 platform.
+ 
++config MTD_NAND_RB100
++	tristate "NAND Flash device on RB100 board"
++	depends on MTD_NAND
++	help
++	  Support for NAND flash on RB100 platform.
++
+ config MTD_NAND_IDS
+ 	tristate
+ 
+Index: linux-2.6.22.1/drivers/mtd/nand/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/drivers/mtd/nand/Makefile
++++ linux-2.6.22.1/drivers/mtd/nand/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nan
+ obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
+ obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
+ obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
++obj-$(CONFIG_MTD_NAND_RB100)		+= rbmipsnand.o
+ obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
+ obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
+ obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
diff --git a/target/linux/adm5120/patches-2.6.22/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.22/005-adm5120_usb.patch
new file mode 100644
index 0000000000..9b2272ae0d
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/005-adm5120_usb.patch
@@ -0,0 +1,66 @@
+Index: linux-2.6.22.1/drivers/usb/core/hub.c
+===================================================================
+--- linux-2.6.22.1.orig/drivers/usb/core/hub.c
++++ linux-2.6.22.1/drivers/usb/core/hub.c
+@@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub
+ 			"%s failed (err = %d)\n", __FUNCTION__, ret);
+ 	else {
+ 		*status = le16_to_cpu(hub->status->hub.wHubStatus);
+-		*change = le16_to_cpu(hub->status->hub.wHubChange); 
++		*change = le16_to_cpu(hub->status->hub.wHubChange);
+ 		ret = 0;
+ 	}
+ 	mutex_unlock(&hub->status_mutex);
+@@ -1424,7 +1424,7 @@ static int hub_port_status(struct usb_hu
+ 			ret = -EIO;
+ 	} else {
+ 		*status = le16_to_cpu(hub->status->port.wPortStatus);
+-		*change = le16_to_cpu(hub->status->port.wPortChange); 
++		*change = le16_to_cpu(hub->status->port.wPortChange);
+ 		ret = 0;
+ 	}
+ 	mutex_unlock(&hub->status_mutex);
+@@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru
+ 					USB_DT_DEVICE << 8, 0,
+ 					buf, GET_DESCRIPTOR_BUFSIZE,
+ 					USB_CTRL_GET_TIMEOUT);
++printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
++buf->bDescriptorType, USB_DT_DEVICE);
+ 				switch (buf->bMaxPacketSize0) {
+ 				case 8: case 16: case 32: case 64: case 255:
+ 					if (buf->bDescriptorType ==
+Index: linux-2.6.22.1/drivers/usb/host/Kconfig
+===================================================================
+--- linux-2.6.22.1.orig/drivers/usb/host/Kconfig
++++ linux-2.6.22.1/drivers/usb/host/Kconfig
+@@ -237,3 +237,6 @@ config USB_SL811_CS
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called "sl811_cs".
+ 
++config USB_ADM5120_HCD
++	tristate "ADM5120 HCD support"
++	depends on USB && MIPS_ADM5120
+Index: linux-2.6.22.1/drivers/usb/host/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/drivers/usb/host/Makefile
++++ linux-2.6.22.1/drivers/usb/host/Makefile
+@@ -8,6 +8,7 @@ endif
+ 
+ obj-$(CONFIG_PCI)		+= pci-quirks.o
+ 
++obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
+ obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
+ obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
+ obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
+Index: linux-2.6.22.1/drivers/usb/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/drivers/usb/Makefile
++++ linux-2.6.22.1/drivers/usb/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
+ obj-$(CONFIG_USB_SL811_HCD)	+= host/
+ obj-$(CONFIG_USB_U132_HCD)	+= host/
+ obj-$(CONFIG_USB_OHCI_AT91)	+= host/
++obj-$(CONFIG_USB_ADM5120_HCD)  	+= host/
+ 
+ obj-$(CONFIG_USB_ACM)		+= class/
+ obj-$(CONFIG_USB_PRINTER)	+= class/
diff --git a/target/linux/adm5120/patches-2.6.22/006-adm5120_leds.patch b/target/linux/adm5120/patches-2.6.22/006-adm5120_leds.patch
new file mode 100644
index 0000000000..bf173bd92c
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/006-adm5120_leds.patch
@@ -0,0 +1,45 @@
+Index: linux-2.6.22.1/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.22.1.orig/drivers/leds/Kconfig
++++ linux-2.6.22.1/drivers/leds/Kconfig
+@@ -20,6 +20,27 @@ config LEDS_CLASS
+ 
+ comment "LED drivers"
+ 
++config LEDS_GPIO
++	tristate "LED support for LEDS on GPIO lines"
++	depends on LEDS_CLASS && GENERIC_GPIO
++	help
++	  This option enables support for LEDs connected to GPIO lines
++
++config LEDS_ADM5120
++	tristate "LED Support for ADM5120 GPIO LEDs"
++	depends on LEDS_GPIO && MIPS_ADM5120
++	help
++	  This option enables support for LEDs connected to GPIO lines
++	  on ADM5120 SoC based platforms.
++
++config LEDS_ADM5120_EXPERIMENTAL
++	bool "Enable ADM5120 LEDs experimental code"
++	depends on LEDS_ADM5120
++
++config LEDS_ADM5120_DIAG
++	bool "Enable ADM5120 LEDs diagnostic mode"
++	depends on LEDS_ADM5120
++
+ config LEDS_CORGI
+ 	tristate "LED Support for the Sharp SL-C7x0 series"
+ 	depends on LEDS_CLASS && PXA_SHARP_C7xx
+Index: linux-2.6.22.1/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/drivers/leds/Makefile
++++ linux-2.6.22.1/drivers/leds/Makefile
+@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
+ obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
+ 
+ # LED Platform Drivers
++obj-$(CONFIG_LEDS_GPIO)		+= leds-gpio.o
++obj-$(CONFIG_LEDS_ADM5120)		+= leds-adm5120.o
+ obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
+ obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
+ obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
diff --git a/target/linux/adm5120/patches-2.6.22/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.22/007-adm5120_pci.patch
new file mode 100644
index 0000000000..71b97ed126
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/007-adm5120_pci.patch
@@ -0,0 +1,23 @@
+Index: linux-2.6.22.1/arch/mips/pci/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/arch/mips/pci/Makefile
++++ linux-2.6.22.1/arch/mips/pci/Makefile
+@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
+ obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
+ obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
++obj-$(CONFIG_PCI_ADM5120)	+= fixup-adm5120.o ops-adm5120.o pci-adm5120.o
+Index: linux-2.6.22.1/include/linux/pci_ids.h
+===================================================================
+--- linux-2.6.22.1.orig/include/linux/pci_ids.h
++++ linux-2.6.22.1/include/linux/pci_ids.h
+@@ -1713,6 +1713,9 @@
+ #define PCI_VENDOR_ID_ESDGMBH		0x12fe
+ #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+ 
++#define PCI_VENDOR_ID_ADMTEK		0x1317
++#define PCI_DEVICE_ID_ADMTEK_ADM5120	0x5120
++
+ #define PCI_VENDOR_ID_SIIG		0x131f
+ #define PCI_SUBVENDOR_ID_SIIG		0x131f
+ #define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
diff --git a/target/linux/adm5120/patches-2.6.22/008-adm5120_uart.patch b/target/linux/adm5120/patches-2.6.22/008-adm5120_uart.patch
new file mode 100644
index 0000000000..7f8451324d
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/008-adm5120_uart.patch
@@ -0,0 +1,53 @@
+Index: linux-2.6.22.1/drivers/serial/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/drivers/serial/Makefile
++++ linux-2.6.22.1/drivers/serial/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) 
+ obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
++obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
+ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
+ obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+Index: linux-2.6.22.1/include/linux/serial_core.h
+===================================================================
+--- linux-2.6.22.1.orig/include/linux/serial_core.h
++++ linux-2.6.22.1/include/linux/serial_core.h
+@@ -143,6 +143,9 @@
+ #define PORT_KS8695	76
+ 
+ 
++/* ADMtek ADM5120 SoC */
++#define PORT_ADM5120	77
++
+ #ifdef __KERNEL__
+ 
+ #include <linux/compiler.h>
+Index: linux-2.6.22.1/drivers/serial/Kconfig
+===================================================================
+--- linux-2.6.22.1.orig/drivers/serial/Kconfig
++++ linux-2.6.22.1/drivers/serial/Kconfig
+@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K
+ 
+ comment "Non-8250 serial port support"
+ 
++config SERIAL_ADM5120
++       bool "ADM5120 serial port support"
++       depends on MIPS_ADM5120
++       select SERIAL_CORE
++       select SERIAL_CORE_CONSOLE
++       help
++         Driver for the on chip UARTs on the ADM5120 SoC
++
++config ADM5120_NR_UARTS
++       int "Maximum number of ADM5120 serial ports"
++       depends on SERIAL_ADM5120
++       default "2"
++       ---help---
++         Set this to the number of serial ports you want the driver to
++         support.
++
+ config SERIAL_AMBA_PL010
+ 	tristate "ARM AMBA PL010 serial port support"
+ 	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
diff --git a/target/linux/adm5120/patches-2.6.22/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches-2.6.22/100-mtd_myloder_partition_parser.patch
new file mode 100644
index 0000000000..574b2d2158
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/100-mtd_myloder_partition_parser.patch
@@ -0,0 +1,39 @@
+Index: linux-2.6.22.1/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.22.1.orig/drivers/mtd/Kconfig
++++ linux-2.6.22.1/drivers/mtd/Kconfig
+@@ -160,6 +160,22 @@ config MTD_AFS_PARTS
+ 	  for your particular device. It won't happen automatically. The
+ 	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on MIPS_ADM5120 && MTD_PARTITIONS
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+Index: linux-2.6.22.1/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.22.1.orig/drivers/mtd/Makefile
++++ linux-2.6.22.1/drivers/mtd/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/adm5120/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch
new file mode 100644
index 0000000000..84c45d2014
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch
@@ -0,0 +1,95 @@
+Index: linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.22.1.orig/drivers/mtd/chips/cfi_cmdset_0002.c
++++ linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -47,12 +47,19 @@
+ #define MANUFACTURER_AMD	0x0001
+ #define MANUFACTURER_ATMEL	0x001F
+ #define MANUFACTURER_SST	0x00BF
++#define MANUFACTURER_MACRONIX	0x00C2
+ #define SST49LF004B	        0x0060
+ #define SST49LF040B	        0x0050
+ #define SST49LF008A		0x005a
+ #define AT49BV6416		0x00d6
+ #define MANUFACTURER_SAMSUNG	0x00ec
+ 
++/* Macronix */
++#define MX29LV160B	0x2249	/* MX29LV160 Bottom-boot chip */
++#define MX29LV160T	0x22C4	/* MX29LV160 Top-boot chip */
++#define MX29LV320B	0x22A8	/* MX29LV320 Bottom-boot chip */
++#define MX29LV320T	0x22A7	/* MX29LV320 Top-boot chip */
++
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct 
+ 	mtd->flags |= MTD_STUPID_LOCK;
+ }
+ 
++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++/*
++ * Some Macronix chips has no/bad bootblock information in the CFI table
++ */
++static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
++{
++	struct map_info *map = mtd->priv;
++	struct cfi_private *cfi = map->fldrv_priv;
++	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
++	__u8 t;
++
++	switch (cfi->id) {
++	/* TODO: put affected chip ids here */
++	case MX29LV160B:
++	case MX29LV320B:
++		t = 2;	/* Bottom boot */
++		break;
++	case MX29LV160T:
++	case MX29LV320T:
++		t = 3;	/* Top boot */
++		break;
++	default:
++		return;
++	}
++
++	if (extp->TopBottom == t)
++		/* boot location detected by the CFI layer is correct */
++		return;
++
++	extp->TopBottom = t;
++	printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
++		"to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
++}
++#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
++
+ static struct cfi_fixup cfi_fixup_table[] = {
+ #ifdef AMD_BOOTLOC_BUG
+ 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
+ #endif
+ 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++	{ MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
++#endif
+ 	{ 0, 0, NULL, NULL }
+ };
+ static struct cfi_fixup jedec_fixup_table[] = {
+Index: linux-2.6.22.1/drivers/mtd/chips/Kconfig
+===================================================================
+--- linux-2.6.22.1.orig/drivers/mtd/chips/Kconfig
++++ linux-2.6.22.1/drivers/mtd/chips/Kconfig
+@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
+ 	  provides support for one of those command sets, used on chips
+ 	  including the AMD Am29LV320.
+ 
++config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++	bool "Force bottom boot for Macronix flash chips"
++	depends on MTD_CFI_AMDSTD
++	help
++	  Some Macronix flash chips have no/wrong boot-block location in the
++	  CFI table, and the driver may detect the type incorrectly. Select
++	  this if your board has such chip.
++
+ config MTD_CFI_STAA
+ 	tristate "Support for ST (Advanced Architecture) flash chips"
+ 	depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch
new file mode 100644
index 0000000000..abed363edb
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch
@@ -0,0 +1,74 @@
+Index: linux-2.6.22.1/drivers/mtd/chips/jedec_probe.c
+===================================================================
+--- linux-2.6.22.1.orig/drivers/mtd/chips/jedec_probe.c
++++ linux-2.6.22.1/drivers/mtd/chips/jedec_probe.c
+@@ -121,6 +121,10 @@
+ #define UPD29F064115	0x221C
+ 
+ /* PMC */
++#define PM39LV512	0x001B
++#define PM39LV010	0x001C
++#define PM39LV020	0x003D
++#define PM39LV040	0x003E
+ #define PM49FL002	0x006D
+ #define PM49FL004	0x006E
+ #define PM49FL008	0x006A
+@@ -1246,6 +1250,58 @@ static const struct amd_flash_info jedec
+ 			ERASEINFO(0x02000,2),
+ 			ERASEINFO(0x04000,1),
+ 		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV512,
++		.name		= "PMC Pm39LV512",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_64KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,16),
++		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV010,
++		.name		= "PMC Pm39LV010",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_128KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,32),
++		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV020,
++		.name		= "PMC Pm39LV020",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_256KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,64),
++		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV040,
++		.name		= "PMC Pm39LV040",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_512KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,128),
++		}
+ 	}, {
+ 		.mfr_id		= MANUFACTURER_PMC,
+ 		.dev_id		= PM49FL002,
diff --git a/target/linux/adm5120/patches-2.6.22/140-cmdline_hack.patch b/target/linux/adm5120/patches-2.6.22/140-cmdline_hack.patch
new file mode 100644
index 0000000000..093dfc6b4f
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/140-cmdline_hack.patch
@@ -0,0 +1,26 @@
+Index: linux-2.6.22.1/arch/mips/kernel/head.S
+===================================================================
+--- linux-2.6.22.1.orig/arch/mips/kernel/head.S
++++ linux-2.6.22.1/arch/mips/kernel/head.S
+@@ -129,14 +129,19 @@
+ #endif
+ 	.endm
+ 
+-
+ 	j kernel_entry
+ 	nop
+-
++	nop
++	
+ 	/*
+ 	 * Reserved space for exception handlers.
+ 	 * Necessary for machines which link their kernels at KSEG0.
++	 * Use as temporary storage for the kernel command line, so that it
++	 * can be updated easily without having to relink the kernel.
+ 	 */
++	 
++EXPORT(_image_cmdline)
++	.ascii "CMDLINE:"
+ 	.align 10
+ 
+ EXPORT(stext)					# used for profiling
diff --git a/target/linux/adm5120/patches-2.6.22/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.22/200-amba_pl010_hacks.patch
new file mode 100644
index 0000000000..840d5a4cf5
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/200-amba_pl010_hacks.patch
@@ -0,0 +1,297 @@
+Index: linux/drivers/serial/amba-pl010.c
+===================================================================
+--- linux.orig/drivers/serial/amba-pl010.c
++++ linux/drivers/serial/amba-pl010.c
+@@ -52,11 +52,10 @@
+ 
+ #include <asm/io.h>
+ 
+-#define UART_NR		8
+-
+ #define SERIAL_AMBA_MAJOR	204
+ #define SERIAL_AMBA_MINOR	16
+-#define SERIAL_AMBA_NR		UART_NR
++#define SERIAL_AMBA_NR		CONFIG_SERIAL_AMBA_PL010_NUMPORTS
++#define SERIAL_AMBA_NAME	CONFIG_SERIAL_AMBA_PL010_PORTNAME
+ 
+ #define AMBA_ISR_PASS_LIMIT	256
+ 
+@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
+ 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ 	unsigned int cr;
+ 
+-	cr = readb(uap->port.membase + UART010_CR);
++	cr = readl(uap->port.membase + UART010_CR);
+ 	cr &= ~UART010_CR_TIE;
+ 	writel(cr, uap->port.membase + UART010_CR);
+ }
+@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
+ 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ 	unsigned int cr;
+ 
+-	cr = readb(uap->port.membase + UART010_CR);
++	cr = readl(uap->port.membase + UART010_CR);
+ 	cr |= UART010_CR_TIE;
+ 	writel(cr, uap->port.membase + UART010_CR);
+ }
+@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
+ 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ 	unsigned int cr;
+ 
+-	cr = readb(uap->port.membase + UART010_CR);
++	cr = readl(uap->port.membase + UART010_CR);
+ 	cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
+ 	writel(cr, uap->port.membase + UART010_CR);
+ }
+@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
+ 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ 	unsigned int cr;
+ 
+-	cr = readb(uap->port.membase + UART010_CR);
++	cr = readl(uap->port.membase + UART010_CR);
+ 	cr |= UART010_CR_MSIE;
+ 	writel(cr, uap->port.membase + UART010_CR);
+ }
+@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
+ 	struct tty_struct *tty = uap->port.info->tty;
+ 	unsigned int status, ch, flag, rsr, max_count = 256;
+ 
+-	status = readb(uap->port.membase + UART01x_FR);
++	status = readl(uap->port.membase + UART01x_FR);
+ 	while (UART_RX_DATA(status) && max_count--) {
+-		ch = readb(uap->port.membase + UART01x_DR);
++		ch = readl(uap->port.membase + UART01x_DR);
+ 		flag = TTY_NORMAL;
+ 
+ 		uap->port.icount.rx++;
+@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
+ 		 * Note that the error handling code is
+ 		 * out of the main execution path
+ 		 */
+-		rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
++		rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
+ 		if (unlikely(rsr & UART01x_RSR_ANY)) {
+ 			writel(0, uap->port.membase + UART01x_ECR);
+ 
+@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
+ 		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+ 
+ 	ignore_char:
+-		status = readb(uap->port.membase + UART01x_FR);
++		status = readl(uap->port.membase + UART01x_FR);
+ 	}
+ 	spin_unlock(&uap->port.lock);
+ 	tty_flip_buffer_push(tty);
+@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
+ 
+ 	writel(0, uap->port.membase + UART010_ICR);
+ 
+-	status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++	status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ 
+ 	delta = status ^ uap->old_status;
+ 	uap->old_status = status;
+@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
+ 
+ 	spin_lock(&uap->port.lock);
+ 
+-	status = readb(uap->port.membase + UART010_IIR);
++	status = readl(uap->port.membase + UART010_IIR);
+ 	if (status) {
+ 		do {
+ 			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
+@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
+ 			if (pass_counter-- == 0)
+ 				break;
+ 
+-			status = readb(uap->port.membase + UART010_IIR);
++			status = readl(uap->port.membase + UART010_IIR);
+ 		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
+ 				   UART010_IIR_TIS));
+ 		handled = 1;
+@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
+ static unsigned int pl010_tx_empty(struct uart_port *port)
+ {
+ 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+-	unsigned int status = readb(uap->port.membase + UART01x_FR);
++	unsigned int status = readl(uap->port.membase + UART01x_FR);
+ 	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
+ }
+ 
+@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
+ 	unsigned int result = 0;
+ 	unsigned int status;
+ 
+-	status = readb(uap->port.membase + UART01x_FR);
++	status = readl(uap->port.membase + UART01x_FR);
+ 	if (status & UART01x_FR_DCD)
+ 		result |= TIOCM_CAR;
+ 	if (status & UART01x_FR_DSR)
+@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
+ 	unsigned int lcr_h;
+ 
+ 	spin_lock_irqsave(&uap->port.lock, flags);
+-	lcr_h = readb(uap->port.membase + UART010_LCRH);
++	lcr_h = readl(uap->port.membase + UART010_LCRH);
+ 	if (break_state == -1)
+ 		lcr_h |= UART01x_LCRH_BRK;
+ 	else
+@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
+ 	/*
+ 	 * initialise the old status of the modem signals
+ 	 */
+-	uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++	uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ 
+ 	/*
+ 	 * Finally, enable interrupts
+@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
+ 	writel(0, uap->port.membase + UART010_CR);
+ 
+ 	/* disable break condition and fifos */
+-	writel(readb(uap->port.membase + UART010_LCRH) &
++	writel(readl(uap->port.membase + UART010_LCRH) &
+ 		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
+ 	       uap->port.membase + UART010_LCRH);
+ 
+@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
+ 	/*
+ 	 * Ask the core to calculate the divisor for us.
+ 	 */
+-	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
++	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
+ 	quot = uart_get_divisor(port, baud);
+ 
+ 	switch (termios->c_cflag & CSIZE) {
+@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
+ 		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
+ 
+ 	/* first, disable everything */
+-	old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
++	old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
+ 
+ 	if (UART_ENABLE_MS(port, termios->c_cflag))
+ 		old_cr |= UART010_CR_MSIE;
+@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
+ 	.verify_port	= pl010_verify_port,
+ };
+ 
+-static struct uart_amba_port *amba_ports[UART_NR];
++static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
+ 
+ #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
+ 
+@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
+ 	unsigned int status;
+ 
+ 	do {
+-		status = readb(uap->port.membase + UART01x_FR);
++		status = readl(uap->port.membase + UART01x_FR);
+ 		barrier();
+ 	} while (!UART_TX_READY(status));
+ 	writel(ch, uap->port.membase + UART01x_DR);
+@@ -567,7 +566,7 @@ pl010_console_write(struct console *co, 
+ 	/*
+ 	 *	First save the CR then disable the interrupts
+ 	 */
+-	old_cr = readb(uap->port.membase + UART010_CR);
++	old_cr = readl(uap->port.membase + UART010_CR);
+ 	writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
+ 
+ 	uart_console_write(&uap->port, s, count, pl010_console_putchar);
+@@ -577,7 +576,7 @@ pl010_console_write(struct console *co, 
+ 	 *	and restore the TCR
+ 	 */
+ 	do {
+-		status = readb(uap->port.membase + UART01x_FR);
++		status = readl(uap->port.membase + UART01x_FR);
+ 		barrier();
+ 	} while (status & UART01x_FR_BUSY);
+ 	writel(old_cr, uap->port.membase + UART010_CR);
+@@ -589,9 +588,9 @@ static void __init
+ pl010_console_get_options(struct uart_amba_port *uap, int *baud,
+ 			     int *parity, int *bits)
+ {
+-	if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
++	if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
+ 		unsigned int lcr_h, quot;
+-		lcr_h = readb(uap->port.membase + UART010_LCRH);
++		lcr_h = readl(uap->port.membase + UART010_LCRH);
+ 
+ 		*parity = 'n';
+ 		if (lcr_h & UART01x_LCRH_PEN) {
+@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
+ 		else
+ 			*bits = 8;
+ 
+-		quot = readb(uap->port.membase + UART010_LCRL) |
+-		       readb(uap->port.membase + UART010_LCRM) << 8;
++		quot = readl(uap->port.membase + UART010_LCRL) |
++		       readl(uap->port.membase + UART010_LCRM) << 8;
+ 		*baud = uap->port.uartclk / (16 * (quot + 1));
+ 	}
+ }
+@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
+ 	 * if so, search for the first available port that does have
+ 	 * console support.
+ 	 */
+-	if (co->index >= UART_NR)
++	if (co->index >= SERIAL_AMBA_NR)
+ 		co->index = 0;
+ 	uap = amba_ports[co->index];
+ 	if (!uap)
+@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
+ 
+ static struct uart_driver amba_reg;
+ static struct console amba_console = {
+-	.name		= "ttyAM",
++	.name		= SERIAL_AMBA_NAME,
+ 	.write		= pl010_console_write,
+ 	.device		= uart_console_device,
+ 	.setup		= pl010_console_setup,
+@@ -659,11 +658,11 @@ static struct console amba_console = {
+ 
+ static struct uart_driver amba_reg = {
+ 	.owner			= THIS_MODULE,
+-	.driver_name		= "ttyAM",
+-	.dev_name		= "ttyAM",
++	.driver_name		= SERIAL_AMBA_NAME,
++	.dev_name		= SERIAL_AMBA_NAME,
+ 	.major			= SERIAL_AMBA_MAJOR,
+ 	.minor			= SERIAL_AMBA_MINOR,
+-	.nr			= UART_NR,
++	.nr			= SERIAL_AMBA_NR,
+ 	.cons			= AMBA_CONSOLE,
+ };
+ 
+Index: linux/drivers/serial/Kconfig
+===================================================================
+--- linux.orig/drivers/serial/Kconfig
++++ linux/drivers/serial/Kconfig
+@@ -293,10 +293,25 @@ config SERIAL_AMBA_PL010
+ 	help
+ 	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
+ 	  an Integrator/AP or Integrator/PP2 platform, or if you have a
+-	  Cirrus Logic EP93xx CPU, say Y or M here.
++	  Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
+ 
+ 	  If unsure, say N.
+ 
++config SERIAL_AMBA_PL010_NUMPORTS
++	int "Maximum number of AMBA PL010 serial ports"
++	depends on SERIAL_AMBA_PL010
++	default "8"
++	---help---
++	  Set this to the number of serial ports you want the AMBA PL010 driver
++	  to support.
++
++config SERIAL_AMBA_PL010_PORTNAME
++	string "Name of the AMBA PL010 serial ports"
++	depends on SERIAL_AMBA_PL010
++	default "ttyAM"
++	---help---
++	  ::: To be written :::
++
+ config SERIAL_AMBA_PL010_CONSOLE
+ 	bool "Support for console on AMBA serial port"
+ 	depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-2.6.22/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.22/201-amba_bus_hacks.patch
new file mode 100644
index 0000000000..3b92f25611
--- /dev/null
+++ b/target/linux/adm5120/patches-2.6.22/201-amba_bus_hacks.patch
@@ -0,0 +1,15 @@
+Index: linux/drivers/amba/bus.c
+===================================================================
+--- linux.orig/drivers/amba/bus.c
++++ linux/drivers/amba/bus.c
+@@ -17,6 +17,10 @@
+ #include <asm/io.h>
+ #include <asm/sizes.h>
+ 
++#ifndef NO_IRQ
++#define NO_IRQ		(-1)
++#endif
++
+ #define to_amba_device(d)	container_of(d, struct amba_device, dev)
+ #define to_amba_driver(d)	container_of(d, struct amba_driver, drv)
+ 
diff --git a/target/linux/adm5120/profiles/100-Atheros.mk b/target/linux/adm5120/profiles/100-Atheros.mk
new file mode 100644
index 0000000000..029586848f
--- /dev/null
+++ b/target/linux/adm5120/profiles/100-Atheros.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Atheros
+  NAME:=Atheros WiFi (default)
+  PACKAGES:=kmod-madwifi
+endef
+
+define Profile/Atheros/Description
+	Package set compatible with hardware using Atheros WiFi cards
+endef
+$(eval $(call Profile,Atheros))
+
diff --git a/target/linux/adm5120/profiles/105-Texas.mk b/target/linux/adm5120/profiles/105-Texas.mk
new file mode 100644
index 0000000000..727a0c0648
--- /dev/null
+++ b/target/linux/adm5120/profiles/105-Texas.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Texas
+  NAME:=Texas Instruments WiFi
+  PACKAGES:=kmod-acx
+endef
+
+define Profile/Texas/Description
+	Package set compatible with hardware using Texas Instruments WiFi cards
+endef
+$(eval $(call Profile,Texas))
+
diff --git a/target/linux/adm5120/profiles/110-Ralink.mk b/target/linux/adm5120/profiles/110-Ralink.mk
new file mode 100644
index 0000000000..d30ee73944
--- /dev/null
+++ b/target/linux/adm5120/profiles/110-Ralink.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Ralink
+  NAME:=Ralink WiFi
+  PACKAGES:=kmod-rt2500
+endef
+
+define Profile/Ralink/Description
+        Package set compatible with hardware using Ralink WiFi cards
+endef
+$(eval $(call Profile,Ralink))
diff --git a/target/linux/adm5120/profiles/200-None.mk b/target/linux/adm5120/profiles/200-None.mk
new file mode 100644
index 0000000000..2fcfacde9f
--- /dev/null
+++ b/target/linux/adm5120/profiles/200-None.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/None
+  NAME:=No WiFi
+  PACKAGES:=
+endef
+
+define Profile/None/Description
+	Package set without WiFi support
+endef
+$(eval $(call Profile,None))
+
diff --git a/target/linux/adm5120/profiles/Cellvision.mk b/target/linux/adm5120/profiles/Cellvision.mk
new file mode 100644
index 0000000000..6912f13e3e
--- /dev/null
+++ b/target/linux/adm5120/profiles/Cellvision.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Cellvision
+  NAME:=Cellvision CAS-63x/77x cameras
+  PACKAGES:=kmod-rt2500 kmod-cpia2 kmod-usb-ohci kmod-usb2 kmod-usb-audio
+endef
+
+define Profile/Cellvision/Description
+  Package set compatible with the Cellvision CAS devices, including Wireless variants.
+endef
+$(eval $(call Profile,Cellvision))
diff --git a/target/linux/adm5120/profiles/RB1xx.mk b/target/linux/adm5120/profiles/RB1xx.mk
new file mode 100644
index 0000000000..9dd3de0973
--- /dev/null
+++ b/target/linux/adm5120/profiles/RB1xx.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/RouterBoard
+  NAME:=RouterBoard RB1xx
+  PACKAGES:=kmod-madwifi
+endef
+
+define Profile/RouterBoard/Description
+  Package set compatible with the RouterBoard RB1xx devices. Contains RouterOS to OpenWrt\\\
+  installation scripts.
+endef
+$(eval $(call Profile,RouterBoard))