adm5120: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

15 files changed, 0 insertions, 1450 deletions

diff --git a/target/linux/adm5120/patches-3.18/001-adm5120.patch b/target/linux/adm5120/patches-3.18/001-adm5120.patch
deleted file mode 100644
index c0558f09b1..0000000000
--- a/target/linux/adm5120/patches-3.18/001-adm5120.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -60,6 +60,24 @@ choice
- 	prompt "System type"
- 	default SGI_IP22
- 
-+config ADM5120
-+	bool "Infineon/ADMtek ADM5120 SoC based machines"
-+	select BOOT_RAW
-+	select NO_EXCEPT_FILL
-+	select CEVT_R4K
-+	select CSRC_R4K
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_EARLY_PRINTK
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select ARCH_REQUIRE_GPIOLIB
-+	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+	select MIPS_MACHINE
-+	select HAVE_CLK
-+
- config MIPS_ALCHEMY
- 	bool "Alchemy processor based machines"
- 	select 64BIT_PHYS_ADDR
-@@ -837,6 +855,7 @@ config MIPS_PARAVIRT
- 
- endchoice
- 
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -1,5 +1,6 @@
- # All platforms listed in alphabetic order
- 
-+platforms += adm5120
- platforms += alchemy
- platforms += ar7
- platforms += ath79
diff --git a/target/linux/adm5120/patches-3.18/002-adm5120_flash.patch b/target/linux/adm5120/patches-3.18/002-adm5120_flash.patch
deleted file mode 100644
index 8936af13e2..0000000000
--- a/target/linux/adm5120/patches-3.18/002-adm5120_flash.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -399,4 +399,8 @@ config MTD_LATCH_ADDR
- 
-           If compiled as a module, it will be called latch-addr-flash.
- 
-+config MTD_ADM5120
-+	tristate "Map driver for ADM5120 based boards"
-+	depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_SUN_UFLASH)	+= sun_ufla
- obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
-+obj-$(CONFIG_MTD_ADM5120)	+= adm5120-flash.o
- obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
- obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
- obj-$(CONFIG_MTD_NETtel)	+= nettel.o
diff --git a/target/linux/adm5120/patches-3.18/003-adm5120_switch.patch b/target/linux/adm5120/patches-3.18/003-adm5120_switch.patch
deleted file mode 100644
index 416488c0e0..0000000000
--- a/target/linux/adm5120/patches-3.18/003-adm5120_switch.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -263,6 +263,10 @@ source "drivers/net/dsa/Kconfig"
- 
- source "drivers/net/ethernet/Kconfig"
- 
-+config ADM5120_ENET
-+	tristate "ADM5120 Ethernet switch support"
-+	depends on ADM5120
-+
- source "drivers/net/fddi/Kconfig"
- 
- source "drivers/net/hippi/Kconfig"
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_CAN) += can/
- obj-$(CONFIG_ETRAX_ETHERNET) += cris/
- obj-$(CONFIG_NET_DSA) += dsa/
- obj-$(CONFIG_ETHERNET) += ethernet/
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_FDDI) += fddi/
- obj-$(CONFIG_HIPPI) += hippi/
- obj-$(CONFIG_HAMRADIO) += hamradio/
diff --git a/target/linux/adm5120/patches-3.18/005-adm5120_usb.patch b/target/linux/adm5120/patches-3.18/005-adm5120_usb.patch
deleted file mode 100644
index 139e223c00..0000000000
--- a/target/linux/adm5120/patches-3.18/005-adm5120_usb.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_DWC2)		+= dwc2/
- obj-$(CONFIG_USB_MON)		+= mon/
- 
- obj-$(CONFIG_PCI)		+= host/
-+obj-$(CONFIG_USB_ADM5120_HCD)	+= host/
- obj-$(CONFIG_USB_EHCI_HCD)	+= host/
- obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
- obj-$(CONFIG_USB_OHCI_HCD)	+= host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -3,6 +3,10 @@
- #
- comment "USB Host Controller Drivers"
- 
-+config USB_ADM5120_HCD
-+	tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+	depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
- 	tristate "Cypress C67x00 HCD support"
- 	help
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_PCI)		+= pci-quirks.o
- obj-$(CONFIG_USB_XHCI_PCI)	+= xhci-pci.o
- obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
- 
-+obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
- obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
- obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
diff --git a/target/linux/adm5120/patches-3.18/007-adm5120_pci.patch b/target/linux/adm5120/patches-3.18/007-adm5120_pci.patch
deleted file mode 100644
index 7a84217bee..0000000000
--- a/target/linux/adm5120/patches-3.18/007-adm5120_pci.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
- obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
- 					ops-bcm63xx.o
-+obj-$(CONFIG_ADM5120)		+= pci-adm5120.o
- obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
- obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1821,6 +1821,9 @@
- 
- #define PCI_VENDOR_ID_CB		0x1307	/* Measurement Computing */
- 
-+#define PCI_VENDOR_ID_ADMTEK		0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120	0x5120
-+
- #define PCI_VENDOR_ID_SIIG		0x131f
- #define PCI_SUBVENDOR_ID_SIIG		0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
diff --git a/target/linux/adm5120/patches-3.18/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-3.18/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644
index 4e37616f81..0000000000
--- a/target/linux/adm5120/patches-3.18/009-adm5120_leds_switch_trigger.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -508,4 +508,12 @@ config LEDS_VERSATILE
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
- 
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+	tristate "LED ADM5120 Switch Port Status Trigger"
-+	depends on LEDS_TRIGGERS && ADM5120
-+	help
-+	  This allows LEDs to be controlled by the port states of
-+	  the ADM5120 built-in Ethernet Switch
-+	  If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -62,3 +62,4 @@ obj-$(CONFIG_LEDS_DAC124S085)		+= leds-d
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-3.18/050-revert_rootfs_splits.patch b/target/linux/adm5120/patches-3.18/050-revert_rootfs_splits.patch
deleted file mode 100644
index 6062259363..0000000000
--- a/target/linux/adm5120/patches-3.18/050-revert_rootfs_splits.patch
+++ /dev/null
@@ -1,354 +0,0 @@
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -30,11 +30,9 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/of.h>
--#include <linux/magic.h>
- #include <linux/err.h>
- 
- #include "mtdcore.h"
--#include "mtdsplit/mtdsplit.h"
- 
- #define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
- 
-@@ -50,14 +48,13 @@ struct mtd_part {
- 	struct list_head list;
- };
- 
--static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
--
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-  * the pointer to that structure with this macro.
-  */
- #define PART(x)  ((struct mtd_part *)(x))
- 
-+
- /*
-  * MTD methods which simply translate the effective address and pass through
-  * to the _real_ device.
-@@ -521,12 +518,14 @@ static struct mtd_part *allocate_partiti
- 	if (slave->offset == MTDPART_OFS_APPEND)
- 		slave->offset = cur_offset;
- 	if (slave->offset == MTDPART_OFS_NXTBLK) {
--		/* Round up to next erasesize */
--		slave->offset = mtd_roundup_to_eb(cur_offset, master);
--		if (slave->offset != cur_offset)
-+		slave->offset = cur_offset;
-+		if (mtd_mod_by_eb(cur_offset, master) != 0) {
-+			/* Round up to next erasesize */
-+			slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
- 			printk(KERN_NOTICE "Moving partition %d: "
- 			       "0x%012llx -> 0x%012llx\n", partno,
- 			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
-+		}
- 	}
- 	if (slave->offset == MTDPART_OFS_RETAIN) {
- 		slave->offset = cur_offset;
-@@ -627,10 +626,8 @@ out_register:
- 	return slave;
- }
- 
--
--static int
--__mtd_add_partition(struct mtd_info *master, const char *name,
--		    long long offset, long long length, bool dup_check)
-+int mtd_add_partition(struct mtd_info *master, const char *name,
-+		      long long offset, long long length)
- {
- 	struct mtd_partition part;
- 	struct mtd_part *p, *new;
-@@ -662,24 +659,21 @@ __mtd_add_partition(struct mtd_info *mas
- 	end = offset + length;
- 
- 	mutex_lock(&mtd_partitions_mutex);
--	if (dup_check) {
--		list_for_each_entry(p, &mtd_partitions, list)
--			if (p->master == master) {
--				if ((start >= p->offset) &&
--				    (start < (p->offset + p->mtd.size)))
--					goto err_inv;
--
--				if ((end >= p->offset) &&
--				    (end < (p->offset + p->mtd.size)))
--					goto err_inv;
--			}
--	}
-+	list_for_each_entry(p, &mtd_partitions, list)
-+		if (p->master == master) {
-+			if ((start >= p->offset) &&
-+			    (start < (p->offset + p->mtd.size)))
-+				goto err_inv;
-+
-+			if ((end >= p->offset) &&
-+			    (end < (p->offset + p->mtd.size)))
-+				goto err_inv;
-+		}
- 
- 	list_add(&new->list, &mtd_partitions);
- 	mutex_unlock(&mtd_partitions_mutex);
- 
- 	add_mtd_device(&new->mtd);
--	mtd_partition_split(master, new);
- 
- 	return ret;
- err_inv:
-@@ -689,12 +683,6 @@ err_inv:
- }
- EXPORT_SYMBOL_GPL(mtd_add_partition);
- 
--int mtd_add_partition(struct mtd_info *master, const char *name,
--		      long long offset, long long length)
--{
--	return __mtd_add_partition(master, name, offset, length, true);
--}
--
- int mtd_del_partition(struct mtd_info *master, int partno)
- {
- 	struct mtd_part *slave, *next;
-@@ -718,166 +706,6 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
--static int
--run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
--{
--	struct mtd_partition *parts;
--	int nr_parts;
--	int i;
--
--	nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, &parts,
--						NULL);
--	if (nr_parts <= 0)
--		return nr_parts;
--
--	if (WARN_ON(!parts))
--		return 0;
--
--	for (i = 0; i < nr_parts; i++) {
--		/* adjust partition offsets */
--		parts[i].offset += slave->offset;
--
--		__mtd_add_partition(slave->master,
--				    parts[i].name,
--				    parts[i].offset,
--				    parts[i].size,
--				    false);
--	}
--
--	kfree(parts);
--
--	return nr_parts;
--}
--
--static inline unsigned long
--mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
--{
--	unsigned long mask = mtd->erasesize - 1;
--
--	len += offset & mask;
--	len = (len + mask) & ~mask;
--	len -= offset & mask;
--	return len;
--}
--
--static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
--{
--	size_t squashfs_len;
--	int len, ret;
--
--	ret = mtd_get_squashfs_len(master, offset, &squashfs_len);
--	if (ret)
--		return ret;
--
--	len = mtd_pad_erasesize(master, offset, squashfs_len);
--	*split_offset = offset + len;
--
--	return 0;
--}
--
--static void split_rootfs_data(struct mtd_info *master, struct mtd_part *part)
--{
--	unsigned int split_offset = 0;
--	unsigned int split_size;
--	int ret;
--
--	ret = split_squashfs(master, part->offset, &split_offset);
--	if (ret)
--		return;
--
--	if (split_offset <= 0)
--		return;
--
--	if (config_enabled(CONFIG_MTD_SPLIT_SQUASHFS_ROOT))
--		pr_err("Dedicated partitioner didn't create \"rootfs_data\" partition, please fill a bug report!\n");
--	else
--		pr_warn("Support for built-in \"rootfs_data\" splitter will be removed, please use CONFIG_MTD_SPLIT_SQUASHFS_ROOT\n");
--
--	split_size = part->mtd.size - (split_offset - part->offset);
--	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=0x%x, len=0x%x\n",
--		ROOTFS_SPLIT_NAME, split_offset, split_size);
--
--	__mtd_add_partition(master, ROOTFS_SPLIT_NAME, split_offset,
--			    split_size, false);
--}
--
--#define UBOOT_MAGIC	0x27051956
--
--static void split_uimage(struct mtd_info *master, struct mtd_part *part)
--{
--	struct {
--		__be32 magic;
--		__be32 pad[2];
--		__be32 size;
--	} hdr;
--	size_t len;
--
--	if (mtd_read(master, part->offset, sizeof(hdr), &len, (void *) &hdr))
--		return;
--
--	if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
--		return;
--
--	len = be32_to_cpu(hdr.size) + 0x40;
--	len = mtd_pad_erasesize(master, part->offset, len);
--	if (len + master->erasesize > part->mtd.size)
--		return;
--
--	if (config_enabled(CONFIG_MTD_SPLIT_UIMAGE_FW))
--		pr_err("Dedicated partitioner didn't split firmware partition, please fill a bug report!\n");
--	else
--		pr_warn("Support for built-in firmware splitter will be removed, please use CONFIG_MTD_SPLIT_UIMAGE_FW\n");
--
--	__mtd_add_partition(master, "rootfs", part->offset + len,
--			    part->mtd.size - len, false);
--}
--
--#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
--#define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
--#else
--#define SPLIT_FIRMWARE_NAME	"unused"
--#endif
--
--static void split_firmware(struct mtd_info *master, struct mtd_part *part)
--{
--	int ret;
--
--	ret = run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
--	if (ret > 0)
--		return;
--
--	if (config_enabled(CONFIG_MTD_UIMAGE_SPLIT))
--		split_uimage(master, part);
--}
--
--void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
--                                int offset, int size)
--{
--}
--
--static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
--{
--	static int rootfs_found = 0;
--
--	if (rootfs_found)
--		return;
--
--	if (!strcmp(part->mtd.name, "rootfs")) {
--		int num = run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
--
--		if (num <= 0 && config_enabled(CONFIG_MTD_ROOTFS_SPLIT))
--			split_rootfs_data(master, part);
--
--		rootfs_found = 1;
--	}
--
--	if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
--	    config_enabled(CONFIG_MTD_SPLIT_FIRMWARE))
--		split_firmware(master, part);
--
--	arch_split_mtd_part(master, part->mtd.name, part->offset,
--			    part->mtd.size);
--}
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -907,7 +735,6 @@ int add_mtd_partitions(struct mtd_info *
- 		mutex_unlock(&mtd_partitions_mutex);
- 
- 		add_mtd_device(&slave->mtd);
--		mtd_partition_split(master, slave);
- 
- 		cur_offset = slave->offset + slave->mtd.size;
- 	}
-@@ -937,30 +764,6 @@ static struct mtd_part_parser *get_parti
- 
- #define put_partition_parser(p) do { module_put((p)->owner); } while (0)
- 
--static struct mtd_part_parser *
--get_partition_parser_by_type(enum mtd_parser_type type,
--			     struct mtd_part_parser *start)
--{
--	struct mtd_part_parser *p, *ret = NULL;
--
--	spin_lock(&part_parser_lock);
--
--	p = list_prepare_entry(start, &part_parsers, list);
--	if (start)
--		put_partition_parser(start);
--
--	list_for_each_entry_continue(p, &part_parsers, list) {
--		if (p->type == type && try_module_get(p->owner)) {
--			ret = p;
--			break;
--		}
--	}
--
--	spin_unlock(&part_parser_lock);
--
--	return ret;
--}
--
- void register_mtd_parser(struct mtd_part_parser *p)
- {
- 	spin_lock(&part_parser_lock);
-@@ -1076,38 +879,6 @@ int parse_mtd_partitions(struct mtd_info
- 	return ret;
- }
- 
--int parse_mtd_partitions_by_type(struct mtd_info *master,
--				 enum mtd_parser_type type,
--				 struct mtd_partition **pparts,
--				 struct mtd_part_parser_data *data)
--{
--	struct mtd_part_parser *prev = NULL;
--	int ret = 0;
--
--	while (1) {
--		struct mtd_part_parser *parser;
--
--		parser = get_partition_parser_by_type(type, prev);
--		if (!parser)
--			break;
--
--		ret = (*parser->parse_fn)(master, pparts, data);
--
--		if (ret > 0) {
--			put_partition_parser(parser);
--			printk(KERN_NOTICE
--			       "%d %s partitions found on MTD device %s\n",
--			       ret, parser->name, master->name);
--			break;
--		}
--
--		prev = parser;
--	}
--
--	return ret;
--}
--EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type);
--
- int mtd_is_partition(const struct mtd_info *mtd)
- {
- 	struct mtd_part *part;
diff --git a/target/linux/adm5120/patches-3.18/100-rootfs_split.patch b/target/linux/adm5120/patches-3.18/100-rootfs_split.patch
deleted file mode 100644
index aa1ede5e32..0000000000
--- a/target/linux/adm5120/patches-3.18/100-rootfs_split.patch
+++ /dev/null
@@ -1,316 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -52,6 +52,14 @@ config MTD_TESTS
- 	  WARNING: some of the tests will ERASE entire MTD device which they
- 	  test. Do not use these tests unless you really know what you do.
- 
-+config MTD_ROOTFS_ROOT_DEV
-+	bool "Automatically set 'rootfs' partition to be root filesystem"
-+	default y
-+
-+config MTD_ROOTFS_SPLIT
-+	bool "Automatically split 'rootfs' partition for squashfs"
-+	default y
-+
- config MTD_REDBOOT_PARTS
- 	tristate "RedBoot partition table parsing"
- 	---help---
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -30,6 +30,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/of.h>
-+#include <linux/root_dev.h>
-+#include <linux/magic.h>
- #include <linux/err.h>
- 
- #include "mtdcore.h"
-@@ -53,7 +55,7 @@ struct mtd_part {
-  * the pointer to that structure with this macro.
-  */
- #define PART(x)  ((struct mtd_part *)(x))
--
-+#define IS_PART(mtd) (mtd->_read == part_read)
- 
- /*
-  * MTD methods which simply translate the effective address and pass through
-@@ -706,6 +708,144 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+#define ROOTFS_SPLIT_NAME "rootfs_data"
-+#define ROOTFS_REMOVED_NAME "<removed>"
-+
-+struct squashfs_super_block {
-+	__le32 s_magic;
-+	__le32 pad0[9];
-+	__le64 bytes_used;
-+};
-+
-+
-+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
-+{
-+	struct squashfs_super_block sb;
-+	int len, ret;
-+
-+	ret = mtd_read(master, offset, sizeof(sb), &len, (void *) &sb);
-+	if (ret || (len != sizeof(sb))) {
-+		printk(KERN_ALERT "split_squashfs: error occured while reading "
-+			"from \"%s\"\n", master->name);
-+		return -EINVAL;
-+	}
-+
-+	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
-+		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
-+			master->name);
-+		*split_offset = 0;
-+		return 0;
-+	}
-+
-+	if (le64_to_cpu((sb.bytes_used)) <= 0) {
-+		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
-+			master->name);
-+		*split_offset = 0;
-+		return 0;
-+	}
-+
-+	len = (u32) le64_to_cpu(sb.bytes_used);
-+	len += (offset & 0x000fffff);
-+	len +=  (master->erasesize - 1);
-+	len &= ~(master->erasesize - 1);
-+	len -= (offset & 0x000fffff);
-+	*split_offset = offset + len;
-+
-+	return 0;
-+}
-+
-+static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
-+{
-+	struct mtd_partition dpart;
-+	struct mtd_part *slave = NULL;
-+	struct mtd_part *spart;
-+	int ret, split_offset = 0;
-+
-+	spart = PART(rpart);
-+	ret = split_squashfs(master, spart->offset, &split_offset);
-+	if (ret)
-+		return ret;
-+
-+	if (split_offset <= 0)
-+		return 0;
-+
-+	memcpy(&dpart, part, sizeof(dpart));
-+	dpart.name = ROOTFS_SPLIT_NAME;
-+
-+	dpart.size = rpart->size - (split_offset - spart->offset);
-+	dpart.offset = split_offset;
-+
-+	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
-+		ROOTFS_SPLIT_NAME, dpart.offset, dpart.size);
-+
-+	slave = allocate_partition(master, &dpart, 0, split_offset);
-+	if (IS_ERR(slave))
-+		return PTR_ERR(slave);
-+	mutex_lock(&mtd_partitions_mutex);
-+	list_add(&slave->list, &mtd_partitions);
-+	mutex_unlock(&mtd_partitions_mutex);
-+
-+	add_mtd_device(&slave->mtd);
-+
-+	rpart->split = &slave->mtd;
-+
-+	return 0;
-+}
-+
-+static int refresh_rootfs_split(struct mtd_info *mtd)
-+{
-+	struct mtd_partition tpart;
-+	struct mtd_part *part;
-+	char *name;
-+	//int index = 0;
-+	int offset, size;
-+	int ret;
-+
-+	part = PART(mtd);
-+
-+	/* check for the new squashfs offset first */
-+	ret = split_squashfs(part->master, part->offset, &offset);
-+	if (ret)
-+		return ret;
-+
-+	if ((offset > 0) && !mtd->split) {
-+		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
-+		/* if we don't have a rootfs split partition, create a new one */
-+		tpart.name = (char *) mtd->name;
-+		tpart.size = mtd->size;
-+		tpart.offset = part->offset;
-+
-+		return split_rootfs_data(part->master, &part->mtd, &tpart);
-+	} else if ((offset > 0) && mtd->split) {
-+		/* update the offsets of the existing partition */
-+		size = mtd->size + part->offset - offset;
-+
-+		part = PART(mtd->split);
-+		part->offset = offset;
-+		part->mtd.size = size;
-+		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
-+			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
-+			(u32) part->offset, (u32) part->mtd.size);
-+		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+		strcpy(name, ROOTFS_SPLIT_NAME);
-+		part->mtd.name = name;
-+	} else if ((offset <= 0) && mtd->split) {
-+		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
-+
-+		/* mark existing partition as removed */
-+		part = PART(mtd->split);
-+		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+		strcpy(name, ROOTFS_REMOVED_NAME);
-+		part->mtd.name = name;
-+		part->offset = 0;
-+		part->mtd.size = 0;
-+	}
-+
-+	return 0;
-+}
-+#endif /* CONFIG_MTD_ROOTFS_SPLIT */
-+
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -722,6 +862,9 @@ int add_mtd_partitions(struct mtd_info *
- 	struct mtd_part *slave;
- 	uint64_t cur_offset = 0;
- 	int i;
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+	int ret;
-+#endif
- 
- 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
- 
-@@ -736,12 +879,53 @@ int add_mtd_partitions(struct mtd_info *
- 
- 		add_mtd_device(&slave->mtd);
- 
-+		if (!strcmp(parts[i].name, "rootfs")) {
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+			if (ROOT_DEV == 0) {
-+				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
-+					"set to be root filesystem\n");
-+				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
-+			}
-+#endif
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+			ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
-+			/* if (ret == 0)
-+			 * 	j++; */
-+#endif
-+		}
-+
- 		cur_offset = slave->offset + slave->mtd.size;
- 	}
- 
- 	return 0;
- }
- 
-+int mtd_device_refresh(struct mtd_info *mtd)
-+{
-+	int ret = 0;
-+
-+	if (IS_PART(mtd)) {
-+		struct mtd_part *part;
-+		struct mtd_info *master;
-+
-+		part = PART(mtd);
-+		master = part->master;
-+		if (master->refresh_device)
-+			ret = master->refresh_device(master);
-+	}
-+
-+	if (!ret && mtd->refresh_device)
-+		ret = mtd->refresh_device(mtd);
-+
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
-+		refresh_rootfs_split(mtd);
-+#endif
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(mtd_device_refresh);
-+
- static DEFINE_SPINLOCK(part_parser_lock);
- static LIST_HEAD(part_parsers);
- 
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -1012,6 +1012,12 @@ static int mtdchar_ioctl(struct file *fi
- 		break;
- 	}
- 
-+	case MTDREFRESH:
-+	{
-+		ret = mtd_device_refresh(mtd);
-+		break;
-+	}
-+
- 	default:
- 		ret = -ENOTTY;
- 	}
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -115,6 +115,7 @@ struct nand_ecclayout {
- 
- struct module;	/* only needed for owner field in mtd_info */
- 
-+struct mtd_info;
- struct mtd_info {
- 	u_char type;
- 	uint32_t flags;
-@@ -231,6 +232,9 @@ struct mtd_info {
- 	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
- 	int (*_suspend) (struct mtd_info *mtd);
- 	void (*_resume) (struct mtd_info *mtd);
-+	int (*refresh_device)(struct mtd_info *mtd);
-+	struct mtd_info *split;
-+
- 	/*
- 	 * If the driver is something smart, like UBI, it may need to maintain
- 	 * its own reference counting. The below functions are only for driver.
-@@ -397,6 +401,7 @@ extern int mtd_device_parse_register(str
- 				     int defnr_parts);
- #define mtd_device_register(master, parts, nr_parts)	\
- 	mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
-+extern int mtd_device_refresh(struct mtd_info *master);
- extern int mtd_device_unregister(struct mtd_info *master);
- extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
- extern int __get_mtd_device(struct mtd_info *mtd);
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -37,12 +37,14 @@
-  */
- struct mtd_info;
- 
-+struct mtd_partition;
- struct mtd_partition {
- 	const char *name;		/* identifier string */
- 	uint64_t size;			/* partition size */
- 	uint64_t offset;		/* offset within the master MTD space */
- 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
- 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
-+	int (*refresh_partition)(struct mtd_info *);
- };
- 
- #define MTDPART_OFS_RETAIN	(-3)
---- a/include/uapi/mtd/mtd-abi.h
-+++ b/include/uapi/mtd/mtd-abi.h
-@@ -203,6 +203,7 @@ struct otp_info {
-  * without OOB, e.g., NOR flash.
-  */
- #define MEMWRITE		_IOWR('M', 24, struct mtd_write_req)
-+#define MTDREFRESH		_IO('M', 50)
- 
- /*
-  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/adm5120/patches-3.18/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-3.18/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644
index 92937fce14..0000000000
--- a/target/linux/adm5120/patches-3.18/101-cfi_fixup_macronix_bootloc.patch
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -49,6 +49,12 @@
- #define SST49LF008A		0x005a
- #define AT49BV6416		0x00d6
- 
-+/* Macronix */
-+#define MX29LV160B	0x2249	/* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T	0x22C4	/* MX29LV160 Top-boot chip */
-+#define MX29LV320B	0x22A8	/* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T	0x22A7	/* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -374,6 +380,41 @@ static struct cfi_fixup cfi_nopri_fixup_
- 	{ 0, 0, NULL }
- };
- 
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+	__u8 t;
-+
-+	switch (cfi->id) {
-+	/* TODO: put affected chip ids here */
-+	case MX29LV160B:
-+	case MX29LV320B:
-+		t = 2;	/* Bottom boot */
-+		break;
-+	case MX29LV160T:
-+	case MX29LV320T:
-+		t = 3;	/* Top boot */
-+		break;
-+	default:
-+		return;
-+	}
-+
-+	if (extp->TopBottom == t)
-+		/* boot location detected by the CFI layer is correct */
-+		return;
-+
-+	extp->TopBottom = t;
-+	printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+		"to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
- 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
- #ifdef AMD_BOOTLOC_BUG
-@@ -416,6 +457,9 @@ static struct cfi_fixup fixup_table[] =
- 	 */
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip },
- 	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	{ CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc },
-+#endif
- 	{ 0, 0, NULL }
- };
- 
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -189,6 +189,14 @@ config MTD_CFI_AMDSTD
- 	  provides support for command set 0002, used on chips including
- 	  the AMD Am29LV320.
- 
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	bool "Fix boot-block location for Macronix flash chips"
-+	depends on MTD_CFI_AMDSTD
-+	help
-+	  Some Macronix flash chips have no/wrong boot-block location in the
-+	  CFI table, and the driver may detect the type incorrectly. Select
-+	  this if your board has such chip.
-+
- config MTD_CFI_STAA
- 	tristate "Support for CFI command set 0020 (ST (Advanced Architecture) chips)"
- 	depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-3.18/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-3.18/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644
index 00148fa602..0000000000
--- a/target/linux/adm5120/patches-3.18/102-jedec_pmc_39lvxxx_chips.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -115,6 +115,10 @@
- #define UPD29F064115	0x221C
- 
- /* PMC */
-+#define PM39LV512	0x001B
-+#define PM39LV010	0x001C
-+#define PM39LV020	0x003D
-+#define PM39LV040	0x003E
- #define PM49FL002	0x006D
- #define PM49FL004	0x006E
- #define PM49FL008	0x006A
-@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
- 			ERASEINFO(0x02000,2),
- 			ERASEINFO(0x04000,1),
- 		}
-+        }, {
-+		.mfr_id		= CFI_MFR_PMC,
-+		.dev_id		= PM39LV512,
-+		.name		= "PMC Pm39LV512",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_64KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,16),
-+		}
-+        }, {
-+		.mfr_id		= CFI_MFR_PMC,
-+		.dev_id		= PM39LV010,
-+		.name		= "PMC Pm39LV010",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_128KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,32),
-+		}
-+        }, {
-+		.mfr_id		= CFI_MFR_PMC,
-+		.dev_id		= PM39LV020,
-+		.name		= "PMC Pm39LV020",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_256KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,64),
-+		}
-+        }, {
-+		.mfr_id		= CFI_MFR_PMC,
-+		.dev_id		= PM39LV040,
-+		.name		= "PMC Pm39LV040",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_512KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,128),
-+		}
- 	}, {
- 		.mfr_id		= CFI_MFR_PMC,
- 		.dev_id		= PM49FL002,
diff --git a/target/linux/adm5120/patches-3.18/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-3.18/103-mtd_trxsplit.patch
deleted file mode 100644
index 62667769cd..0000000000
--- a/target/linux/adm5120/patches-3.18/103-mtd_trxsplit.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -60,6 +60,10 @@ config MTD_ROOTFS_SPLIT
- 	bool "Automatically split 'rootfs' partition for squashfs"
- 	default y
- 
-+config MTD_TRXSPLIT
-+	bool "Automatically find and split TRX partitions"
-+	default n
-+
- config MTD_REDBOOT_PARTS
- 	tristate "RedBoot partition table parsing"
- 	---help---
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_TRXSPLIT)	+= trxsplit.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
diff --git a/target/linux/adm5120/patches-3.18/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-3.18/120-rb153_cf_driver.patch
deleted file mode 100644
index 5390bd95b7..0000000000
--- a/target/linux/adm5120/patches-3.18/120-rb153_cf_driver.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -98,6 +98,7 @@ obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia
- obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
- obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
-+obj-$(CONFIG_PATA_RB153_CF)	+= pata_rb153_cf.o
- obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
- obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF)	+= pata_samsung_cf.o
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -958,6 +958,15 @@ config PATA_QDI
- 	help
- 	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
- 
-+config PATA_RB153_CF
-+	tristate "RouterBOARD 153 Compact Flash support"
-+	depends on ADM5120_MACH_RB_153
-+	help
-+	  This option enables support for a Compact Flash connected on
-+	  the RouterBOARD 153.
-+
-+	  If unsure, say N.
-+
- config PATA_RB532
- 	tristate "RouterBoard 532 PATA CompactFlash support"
- 	depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-3.18/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-3.18/200-amba_pl010_hacks.patch
deleted file mode 100644
index 8eee7a10ff..0000000000
--- a/target/linux/adm5120/patches-3.18/200-amba_pl010_hacks.patch
+++ /dev/null
@@ -1,354 +0,0 @@
---- a/drivers/tty/serial/amba-pl010.c
-+++ b/drivers/tty/serial/amba-pl010.c
-@@ -48,11 +48,9 @@
- #include <linux/slab.h>
- #include <linux/io.h>
- 
--#define UART_NR		8
--
- #define SERIAL_AMBA_MAJOR	204
- #define SERIAL_AMBA_MINOR	16
--#define SERIAL_AMBA_NR		UART_NR
-+#define SERIAL_AMBA_NR		CONFIG_SERIAL_AMBA_PL010_NUMPORTS
- 
- #define AMBA_ISR_PASS_LIMIT	256
- 
-@@ -78,9 +76,9 @@ static void pl010_stop_tx(struct uart_po
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr &= ~UART010_CR_TIE;
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_start_tx(struct uart_port *port)
-@@ -88,9 +86,9 @@ static void pl010_start_tx(struct uart_p
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr |= UART010_CR_TIE;
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_stop_rx(struct uart_port *port)
-@@ -98,9 +96,9 @@ static void pl010_stop_rx(struct uart_po
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_enable_ms(struct uart_port *port)
-@@ -108,18 +106,18 @@ static void pl010_enable_ms(struct uart_
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr |= UART010_CR_MSIE;
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_rx_chars(struct uart_amba_port *uap)
- {
- 	unsigned int status, ch, flag, rsr, max_count = 256;
- 
--	status = readb(uap->port.membase + UART01x_FR);
-+	status = __raw_readl(uap->port.membase + UART01x_FR);
- 	while (UART_RX_DATA(status) && max_count--) {
--		ch = readb(uap->port.membase + UART01x_DR);
-+		ch = __raw_readl(uap->port.membase + UART01x_DR);
- 		flag = TTY_NORMAL;
- 
- 		uap->port.icount.rx++;
-@@ -128,9 +126,9 @@ static void pl010_rx_chars(struct uart_a
- 		 * Note that the error handling code is
- 		 * out of the main execution path
- 		 */
--		rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+		rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
- 		if (unlikely(rsr & UART01x_RSR_ANY)) {
--			writel(0, uap->port.membase + UART01x_ECR);
-+			__raw_writel(0, uap->port.membase + UART01x_ECR);
- 
- 			if (rsr & UART01x_RSR_BE) {
- 				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -160,7 +158,7 @@ static void pl010_rx_chars(struct uart_a
- 		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
- 
- 	ignore_char:
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = __raw_readl(uap->port.membase + UART01x_FR);
- 	}
- 	spin_unlock(&uap->port.lock);
- 	tty_flip_buffer_push(&uap->port.state->port);
-@@ -173,7 +171,7 @@ static void pl010_tx_chars(struct uart_a
- 	int count;
- 
- 	if (uap->port.x_char) {
--		writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+		__raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
- 		uap->port.icount.tx++;
- 		uap->port.x_char = 0;
- 		return;
-@@ -185,7 +183,7 @@ static void pl010_tx_chars(struct uart_a
- 
- 	count = uap->port.fifosize >> 1;
- 	do {
--		writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+		__raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
- 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- 		uap->port.icount.tx++;
- 		if (uart_circ_empty(xmit))
-@@ -203,9 +201,9 @@ static void pl010_modem_status(struct ua
- {
- 	unsigned int status, delta;
- 
--	writel(0, uap->port.membase + UART010_ICR);
-+	__raw_writel(0, uap->port.membase + UART010_ICR);
- 
--	status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+	status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
- 
- 	delta = status ^ uap->old_status;
- 	uap->old_status = status;
-@@ -233,7 +231,7 @@ static irqreturn_t pl010_int(int irq, vo
- 
- 	spin_lock(&uap->port.lock);
- 
--	status = readb(uap->port.membase + UART010_IIR);
-+	status = __raw_readl(uap->port.membase + UART010_IIR);
- 	if (status) {
- 		do {
- 			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -246,7 +244,7 @@ static irqreturn_t pl010_int(int irq, vo
- 			if (pass_counter-- == 0)
- 				break;
- 
--			status = readb(uap->port.membase + UART010_IIR);
-+			status = __raw_readl(uap->port.membase + UART010_IIR);
- 		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
- 				   UART010_IIR_TIS));
- 		handled = 1;
-@@ -260,7 +258,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
--	unsigned int status = readb(uap->port.membase + UART01x_FR);
-+	unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
- 	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
- 
-@@ -270,7 +268,7 @@ static unsigned int pl010_get_mctrl(stru
- 	unsigned int result = 0;
- 	unsigned int status;
- 
--	status = readb(uap->port.membase + UART01x_FR);
-+	status = __raw_readl(uap->port.membase + UART01x_FR);
- 	if (status & UART01x_FR_DCD)
- 		result |= TIOCM_CAR;
- 	if (status & UART01x_FR_DSR)
-@@ -296,12 +294,12 @@ static void pl010_break_ctl(struct uart_
- 	unsigned int lcr_h;
- 
- 	spin_lock_irqsave(&uap->port.lock, flags);
--	lcr_h = readb(uap->port.membase + UART010_LCRH);
-+	lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
- 	if (break_state == -1)
- 		lcr_h |= UART01x_LCRH_BRK;
- 	else
- 		lcr_h &= ~UART01x_LCRH_BRK;
--	writel(lcr_h, uap->port.membase + UART010_LCRH);
-+	__raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
- 	spin_unlock_irqrestore(&uap->port.lock, flags);
- }
- 
-@@ -329,12 +327,12 @@ static int pl010_startup(struct uart_por
- 	/*
- 	 * initialise the old status of the modem signals
- 	 */
--	uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+	uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
- 
- 	/*
- 	 * Finally, enable interrupts
- 	 */
--	writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+	__raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
- 	       uap->port.membase + UART010_CR);
- 
- 	return 0;
-@@ -357,10 +355,10 @@ static void pl010_shutdown(struct uart_p
- 	/*
- 	 * disable all interrupts, disable the port
- 	 */
--	writel(0, uap->port.membase + UART010_CR);
-+	__raw_writel(0, uap->port.membase + UART010_CR);
- 
- 	/* disable break condition and fifos */
--	writel(readb(uap->port.membase + UART010_LCRH) &
-+	__raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
- 		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
- 	       uap->port.membase + UART010_LCRH);
- 
-@@ -382,7 +380,7 @@ pl010_set_termios(struct uart_port *port
- 	/*
- 	 * Ask the core to calculate the divisor for us.
- 	 */
--	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
- 	quot = uart_get_divisor(port, baud);
- 
- 	switch (termios->c_cflag & CSIZE) {
-@@ -445,25 +443,25 @@ pl010_set_termios(struct uart_port *port
- 		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
- 
- 	/* first, disable everything */
--	old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+	old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
- 
- 	if (UART_ENABLE_MS(port, termios->c_cflag))
- 		old_cr |= UART010_CR_MSIE;
- 
--	writel(0, uap->port.membase + UART010_CR);
-+	__raw_writel(0, uap->port.membase + UART010_CR);
- 
- 	/* Set baud rate */
- 	quot -= 1;
--	writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--	writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+	__raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+	__raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
- 
- 	/*
- 	 * ----------v----------v----------v----------v-----
- 	 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
- 	 * ----------^----------^----------^----------^-----
- 	 */
--	writel(lcr_h, uap->port.membase + UART010_LCRH);
--	writel(old_cr, uap->port.membase + UART010_CR);
-+	__raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+	__raw_writel(old_cr, uap->port.membase + UART010_CR);
- 
- 	spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -545,7 +543,7 @@ static struct uart_ops amba_pl010_pops =
- 	.verify_port	= pl010_verify_port,
- };
- 
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- 
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
- 
-@@ -555,10 +553,10 @@ static void pl010_console_putchar(struct
- 	unsigned int status;
- 
- 	do {
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = __raw_readl(uap->port.membase + UART01x_FR);
- 		barrier();
- 	} while (!UART_TX_READY(status));
--	writel(ch, uap->port.membase + UART01x_DR);
-+	__raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- 
- static void
-@@ -572,8 +570,8 @@ pl010_console_write(struct console *co,
- 	/*
- 	 *	First save the CR then disable the interrupts
- 	 */
--	old_cr = readb(uap->port.membase + UART010_CR);
--	writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+	old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+	__raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
- 
- 	uart_console_write(&uap->port, s, count, pl010_console_putchar);
- 
-@@ -582,10 +580,10 @@ pl010_console_write(struct console *co,
- 	 *	and restore the TCR
- 	 */
- 	do {
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = __raw_readl(uap->port.membase + UART01x_FR);
- 		barrier();
- 	} while (status & UART01x_FR_BUSY);
--	writel(old_cr, uap->port.membase + UART010_CR);
-+	__raw_writel(old_cr, uap->port.membase + UART010_CR);
- 
- 	clk_disable(uap->clk);
- }
-@@ -594,9 +592,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
- 			     int *parity, int *bits)
- {
--	if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+	if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
- 		unsigned int lcr_h, quot;
--		lcr_h = readb(uap->port.membase + UART010_LCRH);
-+		lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
- 
- 		*parity = 'n';
- 		if (lcr_h & UART01x_LCRH_PEN) {
-@@ -611,8 +609,8 @@ pl010_console_get_options(struct uart_am
- 		else
- 			*bits = 8;
- 
--		quot = readb(uap->port.membase + UART010_LCRL) |
--		       readb(uap->port.membase + UART010_LCRM) << 8;
-+		quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+		       __raw_readl(uap->port.membase + UART010_LCRM) << 8;
- 		*baud = uap->port.uartclk / (16 * (quot + 1));
- 	}
- }
-@@ -631,7 +629,7 @@ static int __init pl010_console_setup(st
- 	 * if so, search for the first available port that does have
- 	 * console support.
- 	 */
--	if (co->index >= UART_NR)
-+	if (co->index >= SERIAL_AMBA_NR)
- 		co->index = 0;
- 	uap = amba_ports[co->index];
- 	if (!uap)
-@@ -673,7 +671,7 @@ static struct uart_driver amba_reg = {
- 	.dev_name		= "ttyAM",
- 	.major			= SERIAL_AMBA_MAJOR,
- 	.minor			= SERIAL_AMBA_MINOR,
--	.nr			= UART_NR,
-+	.nr			= SERIAL_AMBA_NR,
- 	.cons			= AMBA_CONSOLE,
- };
- 
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -25,10 +25,18 @@ config SERIAL_AMBA_PL010
- 	help
- 	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
- 	  an Integrator/AP or Integrator/PP2 platform, or if you have a
--	  Cirrus Logic EP93xx CPU, say Y or M here.
-+	  Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
- 
- 	  If unsure, say N.
- 
-+config SERIAL_AMBA_PL010_NUMPORTS
-+	int "Maximum number of AMBA PL010 serial ports"
-+	depends on SERIAL_AMBA_PL010
-+	default "8"
-+	---help---
-+	  Set this to the number of serial ports you want the AMBA PL010 driver
-+	  to support.
-+
- config SERIAL_AMBA_PL010_CONSOLE
- 	bool "Support for console on AMBA serial port"
- 	depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-3.18/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-3.18/203-gpio_leds_brightness.patch
deleted file mode 100644
index 5345022da4..0000000000
--- a/target/linux/adm5120/patches-3.18/203-gpio_leds_brightness.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -55,13 +55,17 @@ static void gpio_led_set(struct led_clas
- 		container_of(led_cdev, struct gpio_led_data, cdev);
- 	int level;
- 
--	if (value == LED_OFF)
--		level = 0;
--	else
--		level = 1;
--
--	if (led_dat->active_low)
--		level = !level;
-+	switch (value) {
-+	case LED_OFF:
-+		level = led_dat->active_low ? 1 : 0;
-+		break;
-+	case LED_FULL:
-+		level = led_dat->active_low ? 0 : 1;
-+		break;
-+	default:
-+		level = value;
-+		break;
-+	}
- 
- 	/* Setting GPIOs with I2C/etc requires a task context, and we don't
- 	 * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-3.18/310-adm5120_wdt.patch b/target/linux/adm5120/patches-3.18/310-adm5120_wdt.patch
deleted file mode 100644
index 4b6db8b8db..0000000000
--- a/target/linux/adm5120/patches-3.18/310-adm5120_wdt.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1116,6 +1116,18 @@ config RC32434_WDT
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called rc32434_wdt.
- 
-+config ADM5120_WDT
-+	tristate "Infineon ADM5120 SoC hardware watchdog"
-+	depends on WATCHDOG && ADM5120
-+	help
-+	  This is a driver for hardware watchdog integrated in Infineon
-+	  ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+	  it doesn't freeze, and if it does, it reboots your computer after a
-+	  certain amount of time.
-+
-+	  To compile this driver as a module, choose M here: the module will be
-+	  called adm5120_wdt.
-+
- config INDYDOG
- 	tristate "Indy/I2 Hardware Watchdog"
- 	depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -131,6 +131,7 @@ obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
- obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
- obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o