adm5120: drop 3.8 and 3.14 support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44823

15 files changed, 0 insertions, 1464 deletions

diff --git a/target/linux/adm5120/patches-3.14/001-adm5120.patch b/target/linux/adm5120/patches-3.14/001-adm5120.patch
deleted file mode 100644
index 4f58001e42..0000000000
--- a/target/linux/adm5120/patches-3.14/001-adm5120.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -56,6 +56,24 @@ choice
- 	prompt "System type"
- 	default SGI_IP22
- 
-+config ADM5120
-+	bool "Infineon/ADMtek ADM5120 SoC based machines"
-+	select BOOT_RAW
-+	select NO_EXCEPT_FILL
-+	select CEVT_R4K
-+	select CSRC_R4K
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_EARLY_PRINTK
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select ARCH_REQUIRE_GPIOLIB
-+	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+	select MIPS_MACHINE
-+	select HAVE_CLK
-+
- config MIPS_ALCHEMY
- 	bool "Alchemy processor based machines"
- 	select 64BIT_PHYS_ADDR
-@@ -795,6 +813,7 @@ config NLM_XLP_BOARD
- 
- endchoice
- 
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -1,5 +1,6 @@
- # All platforms listed in alphabetic order
- 
-+platforms += adm5120
- platforms += alchemy
- platforms += ar7
- platforms += ath79
diff --git a/target/linux/adm5120/patches-3.14/002-adm5120_flash.patch b/target/linux/adm5120/patches-3.14/002-adm5120_flash.patch
deleted file mode 100644
index 8936af13e2..0000000000
--- a/target/linux/adm5120/patches-3.14/002-adm5120_flash.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -399,4 +399,8 @@ config MTD_LATCH_ADDR
- 
-           If compiled as a module, it will be called latch-addr-flash.
- 
-+config MTD_ADM5120
-+	tristate "Map driver for ADM5120 based boards"
-+	depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_SUN_UFLASH)	+= sun_ufla
- obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
-+obj-$(CONFIG_MTD_ADM5120)	+= adm5120-flash.o
- obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
- obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
- obj-$(CONFIG_MTD_NETtel)	+= nettel.o
diff --git a/target/linux/adm5120/patches-3.14/003-adm5120_switch.patch b/target/linux/adm5120/patches-3.14/003-adm5120_switch.patch
deleted file mode 100644
index 273dc393b4..0000000000
--- a/target/linux/adm5120/patches-3.14/003-adm5120_switch.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -268,6 +268,10 @@ source "drivers/net/dsa/Kconfig"
- 
- source "drivers/net/ethernet/Kconfig"
- 
-+config ADM5120_ENET
-+	tristate "ADM5120 Ethernet switch support"
-+	depends on ADM5120
-+
- source "drivers/net/fddi/Kconfig"
- 
- source "drivers/net/hippi/Kconfig"
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_CAN) += can/
- obj-$(CONFIG_ETRAX_ETHERNET) += cris/
- obj-$(CONFIG_NET_DSA) += dsa/
- obj-$(CONFIG_ETHERNET) += ethernet/
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_FDDI) += fddi/
- obj-$(CONFIG_HIPPI) += hippi/
- obj-$(CONFIG_HAMRADIO) += hamradio/
diff --git a/target/linux/adm5120/patches-3.14/005-adm5120_usb.patch b/target/linux/adm5120/patches-3.14/005-adm5120_usb.patch
deleted file mode 100644
index 2a6846d3e6..0000000000
--- a/target/linux/adm5120/patches-3.14/005-adm5120_usb.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_DWC2)		+= dwc2/
- obj-$(CONFIG_USB_MON)		+= mon/
- 
- obj-$(CONFIG_PCI)		+= host/
-+obj-$(CONFIG_USB_ADM5120_HCD)	+= host/
- obj-$(CONFIG_USB_EHCI_HCD)	+= host/
- obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
- obj-$(CONFIG_USB_OHCI_HCD)	+= host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -3,6 +3,10 @@
- #
- comment "USB Host Controller Drivers"
- 
-+config USB_ADM5120_HCD
-+	tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+	depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
- 	tristate "Cypress C67x00 HCD support"
- 	help
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
- 
- obj-$(CONFIG_PCI)		+= pci-quirks.o
- 
-+obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
- obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
- obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
diff --git a/target/linux/adm5120/patches-3.14/007-adm5120_pci.patch b/target/linux/adm5120/patches-3.14/007-adm5120_pci.patch
deleted file mode 100644
index 02bd5f407c..0000000000
--- a/target/linux/adm5120/patches-3.14/007-adm5120_pci.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
- obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
- 					ops-bcm63xx.o
-+obj-$(CONFIG_ADM5120)		+= pci-adm5120.o
- obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
- obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1817,6 +1817,9 @@
- 
- #define PCI_VENDOR_ID_CB		0x1307	/* Measurement Computing */
- 
-+#define PCI_VENDOR_ID_ADMTEK		0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120	0x5120
-+
- #define PCI_VENDOR_ID_SIIG		0x131f
- #define PCI_SUBVENDOR_ID_SIIG		0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
diff --git a/target/linux/adm5120/patches-3.14/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-3.14/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644
index 698b66908c..0000000000
--- a/target/linux/adm5120/patches-3.14/009-adm5120_leds_switch_trigger.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -490,4 +490,12 @@ config LEDS_BLINKM
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
- 
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+	tristate "LED ADM5120 Switch Port Status Trigger"
-+	depends on LEDS_TRIGGERS && ADM5120
-+	help
-+	  This allows LEDs to be controlled by the port states of
-+	  the ADM5120 built-in Ethernet Switch
-+	  If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -63,3 +63,4 @@ obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
- obj-$(CONFIG_LEDS_TRIGGER_USBDEV)	+= ledtrig-usbdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-3.14/050-revert_rootfs_splits.patch b/target/linux/adm5120/patches-3.14/050-revert_rootfs_splits.patch
deleted file mode 100644
index dd41b2b03c..0000000000
--- a/target/linux/adm5120/patches-3.14/050-revert_rootfs_splits.patch
+++ /dev/null
@@ -1,356 +0,0 @@
-Index: linux-3.14.27/drivers/mtd/mtdpart.c
-===================================================================
---- linux-3.14.27.orig/drivers/mtd/mtdpart.c
-+++ linux-3.14.27/drivers/mtd/mtdpart.c
-@@ -29,11 +29,9 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
--#include <linux/magic.h>
- #include <linux/err.h>
- 
- #include "mtdcore.h"
--#include "mtdsplit/mtdsplit.h"
- 
- #define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
- 
-@@ -49,14 +47,13 @@ struct mtd_part {
- 	struct list_head list;
- };
- 
--static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
--
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-  * the pointer to that structure with this macro.
-  */
- #define PART(x)  ((struct mtd_part *)(x))
- 
-+
- /*
-  * MTD methods which simply translate the effective address and pass through
-  * to the _real_ device.
-@@ -509,12 +506,14 @@ static struct mtd_part *allocate_partiti
- 	if (slave->offset == MTDPART_OFS_APPEND)
- 		slave->offset = cur_offset;
- 	if (slave->offset == MTDPART_OFS_NXTBLK) {
--		/* Round up to next erasesize */
--		slave->offset = mtd_roundup_to_eb(cur_offset, master);
--		if (slave->offset != cur_offset)
-+		slave->offset = cur_offset;
-+		if (mtd_mod_by_eb(cur_offset, master) != 0) {
-+			/* Round up to next erasesize */
-+			slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
- 			printk(KERN_NOTICE "Moving partition %d: "
- 			       "0x%012llx -> 0x%012llx\n", partno,
- 			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
-+		}
- 	}
- 	if (slave->offset == MTDPART_OFS_RETAIN) {
- 		slave->offset = cur_offset;
-@@ -616,10 +615,8 @@ out_register:
- 	return slave;
- }
- 
--
--static int
--__mtd_add_partition(struct mtd_info *master, const char *name,
--		    long long offset, long long length, bool dup_check)
-+int mtd_add_partition(struct mtd_info *master, const char *name,
-+		      long long offset, long long length)
- {
- 	struct mtd_partition part;
- 	struct mtd_part *p, *new;
-@@ -651,24 +648,21 @@ __mtd_add_partition(struct mtd_info *mas
- 	end = offset + length;
- 
- 	mutex_lock(&mtd_partitions_mutex);
--	if (dup_check) {
--		list_for_each_entry(p, &mtd_partitions, list)
--			if (p->master == master) {
--				if ((start >= p->offset) &&
--				    (start < (p->offset + p->mtd.size)))
--					goto err_inv;
--
--				if ((end >= p->offset) &&
--				    (end < (p->offset + p->mtd.size)))
--					goto err_inv;
--			}
--	}
-+	list_for_each_entry(p, &mtd_partitions, list)
-+		if (p->master == master) {
-+			if ((start >= p->offset) &&
-+			    (start < (p->offset + p->mtd.size)))
-+				goto err_inv;
-+
-+			if ((end >= p->offset) &&
-+			    (end < (p->offset + p->mtd.size)))
-+				goto err_inv;
-+		}
- 
- 	list_add(&new->list, &mtd_partitions);
- 	mutex_unlock(&mtd_partitions_mutex);
- 
- 	add_mtd_device(&new->mtd);
--	mtd_partition_split(master, new);
- 
- 	return ret;
- err_inv:
-@@ -678,12 +672,6 @@ err_inv:
- }
- EXPORT_SYMBOL_GPL(mtd_add_partition);
- 
--int mtd_add_partition(struct mtd_info *master, const char *name,
--		      long long offset, long long length)
--{
--	return __mtd_add_partition(master, name, offset, length, true);
--}
--
- int mtd_del_partition(struct mtd_info *master, int partno)
- {
- 	struct mtd_part *slave, *next;
-@@ -707,166 +695,6 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
--static int
--run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
--{
--	struct mtd_partition *parts;
--	int nr_parts;
--	int i;
--
--	nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, &parts,
--						NULL);
--	if (nr_parts <= 0)
--		return nr_parts;
--
--	if (WARN_ON(!parts))
--		return 0;
--
--	for (i = 0; i < nr_parts; i++) {
--		/* adjust partition offsets */
--		parts[i].offset += slave->offset;
--
--		__mtd_add_partition(slave->master,
--				    parts[i].name,
--				    parts[i].offset,
--				    parts[i].size,
--				    false);
--	}
--
--	kfree(parts);
--
--	return nr_parts;
--}
--
--static inline unsigned long
--mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
--{
--	unsigned long mask = mtd->erasesize - 1;
--
--	len += offset & mask;
--	len = (len + mask) & ~mask;
--	len -= offset & mask;
--	return len;
--}
--
--static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
--{
--	size_t squashfs_len;
--	int len, ret;
--
--	ret = mtd_get_squashfs_len(master, offset, &squashfs_len);
--	if (ret)
--		return ret;
--
--	len = mtd_pad_erasesize(master, offset, squashfs_len);
--	*split_offset = offset + len;
--
--	return 0;
--}
--
--static void split_rootfs_data(struct mtd_info *master, struct mtd_part *part)
--{
--	unsigned int split_offset = 0;
--	unsigned int split_size;
--	int ret;
--
--	ret = split_squashfs(master, part->offset, &split_offset);
--	if (ret)
--		return;
--
--	if (split_offset <= 0)
--		return;
--
--	if (config_enabled(CONFIG_MTD_SPLIT_SQUASHFS_ROOT))
--		pr_err("Dedicated partitioner didn't create \"rootfs_data\" partition, please fill a bug report!\n");
--	else
--		pr_warn("Support for built-in \"rootfs_data\" splitter will be removed, please use CONFIG_MTD_SPLIT_SQUASHFS_ROOT\n");
--
--	split_size = part->mtd.size - (split_offset - part->offset);
--	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=0x%x, len=0x%x\n",
--		ROOTFS_SPLIT_NAME, split_offset, split_size);
--
--	__mtd_add_partition(master, ROOTFS_SPLIT_NAME, split_offset,
--			    split_size, false);
--}
--
--#define UBOOT_MAGIC	0x27051956
--
--static void split_uimage(struct mtd_info *master, struct mtd_part *part)
--{
--	struct {
--		__be32 magic;
--		__be32 pad[2];
--		__be32 size;
--	} hdr;
--	size_t len;
--
--	if (mtd_read(master, part->offset, sizeof(hdr), &len, (void *) &hdr))
--		return;
--
--	if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
--		return;
--
--	len = be32_to_cpu(hdr.size) + 0x40;
--	len = mtd_pad_erasesize(master, part->offset, len);
--	if (len + master->erasesize > part->mtd.size)
--		return;
--
--	if (config_enabled(CONFIG_MTD_SPLIT_UIMAGE_FW))
--		pr_err("Dedicated partitioner didn't split firmware partition, please fill a bug report!\n");
--	else
--		pr_warn("Support for built-in firmware splitter will be removed, please use CONFIG_MTD_SPLIT_UIMAGE_FW\n");
--
--	__mtd_add_partition(master, "rootfs", part->offset + len,
--			    part->mtd.size - len, false);
--}
--
--#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
--#define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
--#else
--#define SPLIT_FIRMWARE_NAME	"unused"
--#endif
--
--static void split_firmware(struct mtd_info *master, struct mtd_part *part)
--{
--	int ret;
--
--	ret = run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
--	if (ret > 0)
--		return;
--
--	if (config_enabled(CONFIG_MTD_UIMAGE_SPLIT))
--		split_uimage(master, part);
--}
--
--void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
--                                int offset, int size)
--{
--}
--
--static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
--{
--	static int rootfs_found = 0;
--
--	if (rootfs_found)
--		return;
--
--	if (!strcmp(part->mtd.name, "rootfs")) {
--		int num = run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
--
--		if (num <= 0 && config_enabled(CONFIG_MTD_ROOTFS_SPLIT))
--			split_rootfs_data(master, part);
--
--		rootfs_found = 1;
--	}
--
--	if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
--	    config_enabled(CONFIG_MTD_SPLIT_FIRMWARE))
--		split_firmware(master, part);
--
--	arch_split_mtd_part(master, part->mtd.name, part->offset,
--			    part->mtd.size);
--}
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -896,7 +724,6 @@ int add_mtd_partitions(struct mtd_info *
- 		mutex_unlock(&mtd_partitions_mutex);
- 
- 		add_mtd_device(&slave->mtd);
--		mtd_partition_split(master, slave);
- 
- 		cur_offset = slave->offset + slave->mtd.size;
- 	}
-@@ -926,30 +753,6 @@ static struct mtd_part_parser *get_parti
- 
- #define put_partition_parser(p) do { module_put((p)->owner); } while (0)
- 
--static struct mtd_part_parser *
--get_partition_parser_by_type(enum mtd_parser_type type,
--			     struct mtd_part_parser *start)
--{
--	struct mtd_part_parser *p, *ret = NULL;
--
--	spin_lock(&part_parser_lock);
--
--	p = list_prepare_entry(start, &part_parsers, list);
--	if (start)
--		put_partition_parser(start);
--
--	list_for_each_entry_continue(p, &part_parsers, list) {
--		if (p->type == type && try_module_get(p->owner)) {
--			ret = p;
--			break;
--		}
--	}
--
--	spin_unlock(&part_parser_lock);
--
--	return ret;
--}
--
- void register_mtd_parser(struct mtd_part_parser *p)
- {
- 	spin_lock(&part_parser_lock);
-@@ -1023,38 +826,6 @@ int parse_mtd_partitions(struct mtd_info
- 	return ret;
- }
- 
--int parse_mtd_partitions_by_type(struct mtd_info *master,
--				 enum mtd_parser_type type,
--				 struct mtd_partition **pparts,
--				 struct mtd_part_parser_data *data)
--{
--	struct mtd_part_parser *prev = NULL;
--	int ret = 0;
--
--	while (1) {
--		struct mtd_part_parser *parser;
--
--		parser = get_partition_parser_by_type(type, prev);
--		if (!parser)
--			break;
--
--		ret = (*parser->parse_fn)(master, pparts, data);
--
--		if (ret > 0) {
--			put_partition_parser(parser);
--			printk(KERN_NOTICE
--			       "%d %s partitions found on MTD device %s\n",
--			       ret, parser->name, master->name);
--			break;
--		}
--
--		prev = parser;
--	}
--
--	return ret;
--}
--EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type);
--
- int mtd_is_partition(const struct mtd_info *mtd)
- {
- 	struct mtd_part *part;
diff --git a/target/linux/adm5120/patches-3.14/100-rootfs_split.patch b/target/linux/adm5120/patches-3.14/100-rootfs_split.patch
deleted file mode 100644
index 54270bb1a3..0000000000
--- a/target/linux/adm5120/patches-3.14/100-rootfs_split.patch
+++ /dev/null
@@ -1,328 +0,0 @@
-Index: linux-3.14.27/drivers/mtd/Kconfig
-===================================================================
---- linux-3.14.27.orig/drivers/mtd/Kconfig
-+++ linux-3.14.27/drivers/mtd/Kconfig
-@@ -52,6 +52,14 @@ config MTD_TESTS
- 	  WARNING: some of the tests will ERASE entire MTD device which they
- 	  test. Do not use these tests unless you really know what you do.
- 
-+config MTD_ROOTFS_ROOT_DEV
-+	bool "Automatically set 'rootfs' partition to be root filesystem"
-+	default y
-+
-+config MTD_ROOTFS_SPLIT
-+	bool "Automatically split 'rootfs' partition for squashfs"
-+	default y
-+
- config MTD_REDBOOT_PARTS
- 	tristate "RedBoot partition table parsing"
- 	---help---
-Index: linux-3.14.27/drivers/mtd/mtdpart.c
-===================================================================
---- linux-3.14.27.orig/drivers/mtd/mtdpart.c
-+++ linux-3.14.27/drivers/mtd/mtdpart.c
-@@ -29,6 +29,8 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/root_dev.h>
-+#include <linux/magic.h>
- #include <linux/err.h>
- 
- #include "mtdcore.h"
-@@ -52,7 +54,7 @@ struct mtd_part {
-  * the pointer to that structure with this macro.
-  */
- #define PART(x)  ((struct mtd_part *)(x))
--
-+#define IS_PART(mtd) (mtd->_read == part_read)
- 
- /*
-  * MTD methods which simply translate the effective address and pass through
-@@ -695,6 +697,144 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
- 
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+#define ROOTFS_SPLIT_NAME "rootfs_data"
-+#define ROOTFS_REMOVED_NAME "<removed>"
-+
-+struct squashfs_super_block {
-+	__le32 s_magic;
-+	__le32 pad0[9];
-+	__le64 bytes_used;
-+};
-+
-+
-+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
-+{
-+	struct squashfs_super_block sb;
-+	int len, ret;
-+
-+	ret = mtd_read(master, offset, sizeof(sb), &len, (void *) &sb);
-+	if (ret || (len != sizeof(sb))) {
-+		printk(KERN_ALERT "split_squashfs: error occured while reading "
-+			"from \"%s\"\n", master->name);
-+		return -EINVAL;
-+	}
-+
-+	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
-+		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
-+			master->name);
-+		*split_offset = 0;
-+		return 0;
-+	}
-+
-+	if (le64_to_cpu((sb.bytes_used)) <= 0) {
-+		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
-+			master->name);
-+		*split_offset = 0;
-+		return 0;
-+	}
-+
-+	len = (u32) le64_to_cpu(sb.bytes_used);
-+	len += (offset & 0x000fffff);
-+	len +=  (master->erasesize - 1);
-+	len &= ~(master->erasesize - 1);
-+	len -= (offset & 0x000fffff);
-+	*split_offset = offset + len;
-+
-+	return 0;
-+}
-+
-+static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
-+{
-+	struct mtd_partition dpart;
-+	struct mtd_part *slave = NULL;
-+	struct mtd_part *spart;
-+	int ret, split_offset = 0;
-+
-+	spart = PART(rpart);
-+	ret = split_squashfs(master, spart->offset, &split_offset);
-+	if (ret)
-+		return ret;
-+
-+	if (split_offset <= 0)
-+		return 0;
-+
-+	memcpy(&dpart, part, sizeof(dpart));
-+	dpart.name = ROOTFS_SPLIT_NAME;
-+
-+	dpart.size = rpart->size - (split_offset - spart->offset);
-+	dpart.offset = split_offset;
-+
-+	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
-+		ROOTFS_SPLIT_NAME, dpart.offset, dpart.size);
-+
-+	slave = allocate_partition(master, &dpart, 0, split_offset);
-+	if (IS_ERR(slave))
-+		return PTR_ERR(slave);
-+	mutex_lock(&mtd_partitions_mutex);
-+	list_add(&slave->list, &mtd_partitions);
-+	mutex_unlock(&mtd_partitions_mutex);
-+
-+	add_mtd_device(&slave->mtd);
-+
-+	rpart->split = &slave->mtd;
-+
-+	return 0;
-+}
-+
-+static int refresh_rootfs_split(struct mtd_info *mtd)
-+{
-+	struct mtd_partition tpart;
-+	struct mtd_part *part;
-+	char *name;
-+	//int index = 0;
-+	int offset, size;
-+	int ret;
-+
-+	part = PART(mtd);
-+
-+	/* check for the new squashfs offset first */
-+	ret = split_squashfs(part->master, part->offset, &offset);
-+	if (ret)
-+		return ret;
-+
-+	if ((offset > 0) && !mtd->split) {
-+		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
-+		/* if we don't have a rootfs split partition, create a new one */
-+		tpart.name = (char *) mtd->name;
-+		tpart.size = mtd->size;
-+		tpart.offset = part->offset;
-+
-+		return split_rootfs_data(part->master, &part->mtd, &tpart);
-+	} else if ((offset > 0) && mtd->split) {
-+		/* update the offsets of the existing partition */
-+		size = mtd->size + part->offset - offset;
-+
-+		part = PART(mtd->split);
-+		part->offset = offset;
-+		part->mtd.size = size;
-+		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
-+			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
-+			(u32) part->offset, (u32) part->mtd.size);
-+		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+		strcpy(name, ROOTFS_SPLIT_NAME);
-+		part->mtd.name = name;
-+	} else if ((offset <= 0) && mtd->split) {
-+		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
-+
-+		/* mark existing partition as removed */
-+		part = PART(mtd->split);
-+		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+		strcpy(name, ROOTFS_REMOVED_NAME);
-+		part->mtd.name = name;
-+		part->offset = 0;
-+		part->mtd.size = 0;
-+	}
-+
-+	return 0;
-+}
-+#endif /* CONFIG_MTD_ROOTFS_SPLIT */
-+
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -711,6 +851,9 @@ int add_mtd_partitions(struct mtd_info *
- 	struct mtd_part *slave;
- 	uint64_t cur_offset = 0;
- 	int i;
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+	int ret;
-+#endif
- 
- 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
- 
-@@ -725,12 +868,53 @@ int add_mtd_partitions(struct mtd_info *
- 
- 		add_mtd_device(&slave->mtd);
- 
-+		if (!strcmp(parts[i].name, "rootfs")) {
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+			if (ROOT_DEV == 0) {
-+				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
-+					"set to be root filesystem\n");
-+				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
-+			}
-+#endif
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+			ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
-+			/* if (ret == 0)
-+			 * 	j++; */
-+#endif
-+		}
-+
- 		cur_offset = slave->offset + slave->mtd.size;
- 	}
- 
- 	return 0;
- }
- 
-+int mtd_device_refresh(struct mtd_info *mtd)
-+{
-+	int ret = 0;
-+
-+	if (IS_PART(mtd)) {
-+		struct mtd_part *part;
-+		struct mtd_info *master;
-+
-+		part = PART(mtd);
-+		master = part->master;
-+		if (master->refresh_device)
-+			ret = master->refresh_device(master);
-+	}
-+
-+	if (!ret && mtd->refresh_device)
-+		ret = mtd->refresh_device(mtd);
-+
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
-+		refresh_rootfs_split(mtd);
-+#endif
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(mtd_device_refresh);
-+
- static DEFINE_SPINLOCK(part_parser_lock);
- static LIST_HEAD(part_parsers);
- 
-Index: linux-3.14.27/drivers/mtd/mtdchar.c
-===================================================================
---- linux-3.14.27.orig/drivers/mtd/mtdchar.c
-+++ linux-3.14.27/drivers/mtd/mtdchar.c
-@@ -993,6 +993,12 @@ static int mtdchar_ioctl(struct file *fi
- 		break;
- 	}
- 
-+	case MTDREFRESH:
-+	{
-+		ret = mtd_device_refresh(mtd);
-+		break;
-+	}
-+
- 	default:
- 		ret = -ENOTTY;
- 	}
-Index: linux-3.14.27/include/linux/mtd/mtd.h
-===================================================================
---- linux-3.14.27.orig/include/linux/mtd/mtd.h
-+++ linux-3.14.27/include/linux/mtd/mtd.h
-@@ -115,6 +115,7 @@ struct nand_ecclayout {
- 
- struct module;	/* only needed for owner field in mtd_info */
- 
-+struct mtd_info;
- struct mtd_info {
- 	u_char type;
- 	uint32_t flags;
-@@ -230,6 +231,9 @@ struct mtd_info {
- 	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
- 	int (*_suspend) (struct mtd_info *mtd);
- 	void (*_resume) (struct mtd_info *mtd);
-+	int (*refresh_device)(struct mtd_info *mtd);
-+	struct mtd_info *split;
-+
- 	/*
- 	 * If the driver is something smart, like UBI, it may need to maintain
- 	 * its own reference counting. The below functions are only for driver.
-@@ -395,6 +399,7 @@ extern int mtd_device_parse_register(str
- 				     int defnr_parts);
- #define mtd_device_register(master, parts, nr_parts)	\
- 	mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
-+extern int mtd_device_refresh(struct mtd_info *master);
- extern int mtd_device_unregister(struct mtd_info *master);
- extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
- extern int __get_mtd_device(struct mtd_info *mtd);
-Index: linux-3.14.27/include/linux/mtd/partitions.h
-===================================================================
---- linux-3.14.27.orig/include/linux/mtd/partitions.h
-+++ linux-3.14.27/include/linux/mtd/partitions.h
-@@ -37,12 +37,14 @@
-  */
- struct mtd_info;
- 
-+struct mtd_partition;
- struct mtd_partition {
- 	const char *name;		/* identifier string */
- 	uint64_t size;			/* partition size */
- 	uint64_t offset;		/* offset within the master MTD space */
- 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
- 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
-+	int (*refresh_partition)(struct mtd_info *);
- };
- 
- #define MTDPART_OFS_RETAIN	(-3)
-Index: linux-3.14.27/include/uapi/mtd/mtd-abi.h
-===================================================================
---- linux-3.14.27.orig/include/uapi/mtd/mtd-abi.h
-+++ linux-3.14.27/include/uapi/mtd/mtd-abi.h
-@@ -202,6 +202,7 @@ struct otp_info {
-  * without OOB, e.g., NOR flash.
-  */
- #define MEMWRITE		_IOWR('M', 24, struct mtd_write_req)
-+#define MTDREFRESH		_IO('M', 50)
- 
- /*
-  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/adm5120/patches-3.14/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-3.14/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644
index 1fc4df2072..0000000000
--- a/target/linux/adm5120/patches-3.14/101-cfi_fixup_macronix_bootloc.patch
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -50,6 +50,12 @@
- #define SST49LF008A		0x005a
- #define AT49BV6416		0x00d6
- 
-+/* Macronix */
-+#define MX29LV160B	0x2249	/* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T	0x22C4	/* MX29LV160 Top-boot chip */
-+#define MX29LV320B	0x22A8	/* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T	0x22A7	/* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -364,6 +370,41 @@ static struct cfi_fixup cfi_nopri_fixup_
- 	{ 0, 0, NULL }
- };
- 
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd)
-+{
-+	struct map_info *map = mtd->priv;
-+	struct cfi_private *cfi = map->fldrv_priv;
-+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+	__u8 t;
-+
-+	switch (cfi->id) {
-+	/* TODO: put affected chip ids here */
-+	case MX29LV160B:
-+	case MX29LV320B:
-+		t = 2;	/* Bottom boot */
-+		break;
-+	case MX29LV160T:
-+	case MX29LV320T:
-+		t = 3;	/* Top boot */
-+		break;
-+	default:
-+		return;
-+	}
-+
-+	if (extp->TopBottom == t)
-+		/* boot location detected by the CFI layer is correct */
-+		return;
-+
-+	extp->TopBottom = t;
-+	printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+		"to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
- 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
- #ifdef AMD_BOOTLOC_BUG
-@@ -406,6 +447,9 @@ static struct cfi_fixup fixup_table[] =
- 	 */
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip },
- 	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	{ CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc },
-+#endif
- 	{ 0, 0, NULL }
- };
- 
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -188,6 +188,14 @@ config MTD_CFI_AMDSTD
- 	  provides support for one of those command sets, used on chips
- 	  including the AMD Am29LV320.
- 
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+	bool "Fix boot-block location for Macronix flash chips"
-+	depends on MTD_CFI_AMDSTD
-+	help
-+	  Some Macronix flash chips have no/wrong boot-block location in the
-+	  CFI table, and the driver may detect the type incorrectly. Select
-+	  this if your board has such chip.
-+
- config MTD_CFI_STAA
- 	tristate "Support for ST (Advanced Architecture) flash chips"
- 	depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-3.14/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-3.14/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644
index 00148fa602..0000000000
--- a/target/linux/adm5120/patches-3.14/102-jedec_pmc_39lvxxx_chips.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -115,6 +115,10 @@
- #define UPD29F064115	0x221C
- 
- /* PMC */
-+#define PM39LV512	0x001B
-+#define PM39LV010	0x001C
-+#define PM39LV020	0x003D
-+#define PM39LV040	0x003E
- #define PM49FL002	0x006D
- #define PM49FL004	0x006E
- #define PM49FL008	0x006A
-@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
- 			ERASEINFO(0x02000,2),
- 			ERASEINFO(0x04000,1),
- 		}
-+        }, {
-+		.mfr_id		= CFI_MFR_PMC,
-+		.dev_id		= PM39LV512,
-+		.name		= "PMC Pm39LV512",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_64KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,16),
-+		}
-+        }, {
-+		.mfr_id		= CFI_MFR_PMC,
-+		.dev_id		= PM39LV010,
-+		.name		= "PMC Pm39LV010",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_128KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,32),
-+		}
-+        }, {
-+		.mfr_id		= CFI_MFR_PMC,
-+		.dev_id		= PM39LV020,
-+		.name		= "PMC Pm39LV020",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_256KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,64),
-+		}
-+        }, {
-+		.mfr_id		= CFI_MFR_PMC,
-+		.dev_id		= PM39LV040,
-+		.name		= "PMC Pm39LV040",
-+		.devtypes	= CFI_DEVICETYPE_X8,
-+		.uaddr		= MTD_UADDR_0x0555_0x02AA,
-+		.dev_size	= SIZE_512KiB,
-+		.cmd_set	= P_ID_AMD_STD,
-+		.nr_regions	= 1,
-+		.regions	= {
-+			ERASEINFO(0x01000,128),
-+		}
- 	}, {
- 		.mfr_id		= CFI_MFR_PMC,
- 		.dev_id		= PM49FL002,
diff --git a/target/linux/adm5120/patches-3.14/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-3.14/103-mtd_trxsplit.patch
deleted file mode 100644
index 62667769cd..0000000000
--- a/target/linux/adm5120/patches-3.14/103-mtd_trxsplit.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -60,6 +60,10 @@ config MTD_ROOTFS_SPLIT
- 	bool "Automatically split 'rootfs' partition for squashfs"
- 	default y
- 
-+config MTD_TRXSPLIT
-+	bool "Automatically find and split TRX partitions"
-+	default n
-+
- config MTD_REDBOOT_PARTS
- 	tristate "RedBoot partition table parsing"
- 	---help---
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_TRXSPLIT)	+= trxsplit.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
diff --git a/target/linux/adm5120/patches-3.14/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-3.14/120-rb153_cf_driver.patch
deleted file mode 100644
index 9a302234ec..0000000000
--- a/target/linux/adm5120/patches-3.14/120-rb153_cf_driver.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -92,6 +92,7 @@ obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia
- obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
- obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
-+obj-$(CONFIG_PATA_RB153_CF)	+= pata_rb153_cf.o
- obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
- obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF)	+= pata_samsung_cf.o
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -899,6 +899,15 @@ config PATA_QDI
- 	help
- 	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
- 
-+config PATA_RB153_CF
-+	tristate "RouterBOARD 153 Compact Flash support"
-+	depends on ADM5120_MACH_RB_153
-+	help
-+	  This option enables support for a Compact Flash connected on
-+	  the RouterBOARD 153.
-+
-+	  If unsure, say N.
-+
- config PATA_RB532
- 	tristate "RouterBoard 532 PATA CompactFlash support"
- 	depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-3.14/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-3.14/200-amba_pl010_hacks.patch
deleted file mode 100644
index ff47577e08..0000000000
--- a/target/linux/adm5120/patches-3.14/200-amba_pl010_hacks.patch
+++ /dev/null
@@ -1,354 +0,0 @@
---- a/drivers/tty/serial/amba-pl010.c
-+++ b/drivers/tty/serial/amba-pl010.c
-@@ -49,11 +49,9 @@
- 
- #include <asm/io.h>
- 
--#define UART_NR		8
--
- #define SERIAL_AMBA_MAJOR	204
- #define SERIAL_AMBA_MINOR	16
--#define SERIAL_AMBA_NR		UART_NR
-+#define SERIAL_AMBA_NR		CONFIG_SERIAL_AMBA_PL010_NUMPORTS
- 
- #define AMBA_ISR_PASS_LIMIT	256
- 
-@@ -79,9 +77,9 @@ static void pl010_stop_tx(struct uart_po
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr &= ~UART010_CR_TIE;
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_start_tx(struct uart_port *port)
-@@ -89,9 +87,9 @@ static void pl010_start_tx(struct uart_p
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr |= UART010_CR_TIE;
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_stop_rx(struct uart_port *port)
-@@ -99,9 +97,9 @@ static void pl010_stop_rx(struct uart_po
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_enable_ms(struct uart_port *port)
-@@ -109,18 +107,18 @@ static void pl010_enable_ms(struct uart_
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
- 	unsigned int cr;
- 
--	cr = readb(uap->port.membase + UART010_CR);
-+	cr = __raw_readl(uap->port.membase + UART010_CR);
- 	cr |= UART010_CR_MSIE;
--	writel(cr, uap->port.membase + UART010_CR);
-+	__raw_writel(cr, uap->port.membase + UART010_CR);
- }
- 
- static void pl010_rx_chars(struct uart_amba_port *uap)
- {
- 	unsigned int status, ch, flag, rsr, max_count = 256;
- 
--	status = readb(uap->port.membase + UART01x_FR);
-+	status = __raw_readl(uap->port.membase + UART01x_FR);
- 	while (UART_RX_DATA(status) && max_count--) {
--		ch = readb(uap->port.membase + UART01x_DR);
-+		ch = __raw_readl(uap->port.membase + UART01x_DR);
- 		flag = TTY_NORMAL;
- 
- 		uap->port.icount.rx++;
-@@ -129,9 +127,9 @@ static void pl010_rx_chars(struct uart_a
- 		 * Note that the error handling code is
- 		 * out of the main execution path
- 		 */
--		rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+		rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
- 		if (unlikely(rsr & UART01x_RSR_ANY)) {
--			writel(0, uap->port.membase + UART01x_ECR);
-+			__raw_writel(0, uap->port.membase + UART01x_ECR);
- 
- 			if (rsr & UART01x_RSR_BE) {
- 				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -161,7 +159,7 @@ static void pl010_rx_chars(struct uart_a
- 		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
- 
- 	ignore_char:
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = __raw_readl(uap->port.membase + UART01x_FR);
- 	}
- 	spin_unlock(&uap->port.lock);
- 	tty_flip_buffer_push(&uap->port.state->port);
-@@ -174,7 +172,7 @@ static void pl010_tx_chars(struct uart_a
- 	int count;
- 
- 	if (uap->port.x_char) {
--		writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+		__raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
- 		uap->port.icount.tx++;
- 		uap->port.x_char = 0;
- 		return;
-@@ -186,7 +184,7 @@ static void pl010_tx_chars(struct uart_a
- 
- 	count = uap->port.fifosize >> 1;
- 	do {
--		writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+		__raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
- 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- 		uap->port.icount.tx++;
- 		if (uart_circ_empty(xmit))
-@@ -204,9 +202,9 @@ static void pl010_modem_status(struct ua
- {
- 	unsigned int status, delta;
- 
--	writel(0, uap->port.membase + UART010_ICR);
-+	__raw_writel(0, uap->port.membase + UART010_ICR);
- 
--	status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+	status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
- 
- 	delta = status ^ uap->old_status;
- 	uap->old_status = status;
-@@ -234,7 +232,7 @@ static irqreturn_t pl010_int(int irq, vo
- 
- 	spin_lock(&uap->port.lock);
- 
--	status = readb(uap->port.membase + UART010_IIR);
-+	status = __raw_readl(uap->port.membase + UART010_IIR);
- 	if (status) {
- 		do {
- 			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -247,7 +245,7 @@ static irqreturn_t pl010_int(int irq, vo
- 			if (pass_counter-- == 0)
- 				break;
- 
--			status = readb(uap->port.membase + UART010_IIR);
-+			status = __raw_readl(uap->port.membase + UART010_IIR);
- 		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
- 				   UART010_IIR_TIS));
- 		handled = 1;
-@@ -261,7 +259,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
- 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
--	unsigned int status = readb(uap->port.membase + UART01x_FR);
-+	unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
- 	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
- 
-@@ -271,7 +269,7 @@ static unsigned int pl010_get_mctrl(stru
- 	unsigned int result = 0;
- 	unsigned int status;
- 
--	status = readb(uap->port.membase + UART01x_FR);
-+	status = __raw_readl(uap->port.membase + UART01x_FR);
- 	if (status & UART01x_FR_DCD)
- 		result |= TIOCM_CAR;
- 	if (status & UART01x_FR_DSR)
-@@ -297,12 +295,12 @@ static void pl010_break_ctl(struct uart_
- 	unsigned int lcr_h;
- 
- 	spin_lock_irqsave(&uap->port.lock, flags);
--	lcr_h = readb(uap->port.membase + UART010_LCRH);
-+	lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
- 	if (break_state == -1)
- 		lcr_h |= UART01x_LCRH_BRK;
- 	else
- 		lcr_h &= ~UART01x_LCRH_BRK;
--	writel(lcr_h, uap->port.membase + UART010_LCRH);
-+	__raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
- 	spin_unlock_irqrestore(&uap->port.lock, flags);
- }
- 
-@@ -330,12 +328,12 @@ static int pl010_startup(struct uart_por
- 	/*
- 	 * initialise the old status of the modem signals
- 	 */
--	uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+	uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
- 
- 	/*
- 	 * Finally, enable interrupts
- 	 */
--	writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+	__raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
- 	       uap->port.membase + UART010_CR);
- 
- 	return 0;
-@@ -358,10 +356,10 @@ static void pl010_shutdown(struct uart_p
- 	/*
- 	 * disable all interrupts, disable the port
- 	 */
--	writel(0, uap->port.membase + UART010_CR);
-+	__raw_writel(0, uap->port.membase + UART010_CR);
- 
- 	/* disable break condition and fifos */
--	writel(readb(uap->port.membase + UART010_LCRH) &
-+	__raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
- 		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
- 	       uap->port.membase + UART010_LCRH);
- 
-@@ -383,7 +381,7 @@ pl010_set_termios(struct uart_port *port
- 	/*
- 	 * Ask the core to calculate the divisor for us.
- 	 */
--	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+	baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
- 	quot = uart_get_divisor(port, baud);
- 
- 	switch (termios->c_cflag & CSIZE) {
-@@ -446,25 +444,25 @@ pl010_set_termios(struct uart_port *port
- 		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
- 
- 	/* first, disable everything */
--	old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+	old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
- 
- 	if (UART_ENABLE_MS(port, termios->c_cflag))
- 		old_cr |= UART010_CR_MSIE;
- 
--	writel(0, uap->port.membase + UART010_CR);
-+	__raw_writel(0, uap->port.membase + UART010_CR);
- 
- 	/* Set baud rate */
- 	quot -= 1;
--	writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--	writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+	__raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+	__raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
- 
- 	/*
- 	 * ----------v----------v----------v----------v-----
- 	 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
- 	 * ----------^----------^----------^----------^-----
- 	 */
--	writel(lcr_h, uap->port.membase + UART010_LCRH);
--	writel(old_cr, uap->port.membase + UART010_CR);
-+	__raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+	__raw_writel(old_cr, uap->port.membase + UART010_CR);
- 
- 	spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -546,7 +544,7 @@ static struct uart_ops amba_pl010_pops =
- 	.verify_port	= pl010_verify_port,
- };
- 
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- 
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
- 
-@@ -556,10 +554,10 @@ static void pl010_console_putchar(struct
- 	unsigned int status;
- 
- 	do {
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = __raw_readl(uap->port.membase + UART01x_FR);
- 		barrier();
- 	} while (!UART_TX_READY(status));
--	writel(ch, uap->port.membase + UART01x_DR);
-+	__raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- 
- static void
-@@ -573,8 +571,8 @@ pl010_console_write(struct console *co,
- 	/*
- 	 *	First save the CR then disable the interrupts
- 	 */
--	old_cr = readb(uap->port.membase + UART010_CR);
--	writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+	old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+	__raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
- 
- 	uart_console_write(&uap->port, s, count, pl010_console_putchar);
- 
-@@ -583,10 +581,10 @@ pl010_console_write(struct console *co,
- 	 *	and restore the TCR
- 	 */
- 	do {
--		status = readb(uap->port.membase + UART01x_FR);
-+		status = __raw_readl(uap->port.membase + UART01x_FR);
- 		barrier();
- 	} while (status & UART01x_FR_BUSY);
--	writel(old_cr, uap->port.membase + UART010_CR);
-+	__raw_writel(old_cr, uap->port.membase + UART010_CR);
- 
- 	clk_disable(uap->clk);
- }
-@@ -595,9 +593,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
- 			     int *parity, int *bits)
- {
--	if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+	if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
- 		unsigned int lcr_h, quot;
--		lcr_h = readb(uap->port.membase + UART010_LCRH);
-+		lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
- 
- 		*parity = 'n';
- 		if (lcr_h & UART01x_LCRH_PEN) {
-@@ -612,8 +610,8 @@ pl010_console_get_options(struct uart_am
- 		else
- 			*bits = 8;
- 
--		quot = readb(uap->port.membase + UART010_LCRL) |
--		       readb(uap->port.membase + UART010_LCRM) << 8;
-+		quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+		       __raw_readl(uap->port.membase + UART010_LCRM) << 8;
- 		*baud = uap->port.uartclk / (16 * (quot + 1));
- 	}
- }
-@@ -632,7 +630,7 @@ static int __init pl010_console_setup(st
- 	 * if so, search for the first available port that does have
- 	 * console support.
- 	 */
--	if (co->index >= UART_NR)
-+	if (co->index >= SERIAL_AMBA_NR)
- 		co->index = 0;
- 	uap = amba_ports[co->index];
- 	if (!uap)
-@@ -674,7 +672,7 @@ static struct uart_driver amba_reg = {
- 	.dev_name		= "ttyAM",
- 	.major			= SERIAL_AMBA_MAJOR,
- 	.minor			= SERIAL_AMBA_MINOR,
--	.nr			= UART_NR,
-+	.nr			= SERIAL_AMBA_NR,
- 	.cons			= AMBA_CONSOLE,
- };
- 
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -18,10 +18,18 @@ config SERIAL_AMBA_PL010
- 	help
- 	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
- 	  an Integrator/AP or Integrator/PP2 platform, or if you have a
--	  Cirrus Logic EP93xx CPU, say Y or M here.
-+	  Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
- 
- 	  If unsure, say N.
- 
-+config SERIAL_AMBA_PL010_NUMPORTS
-+	int "Maximum number of AMBA PL010 serial ports"
-+	depends on SERIAL_AMBA_PL010
-+	default "8"
-+	---help---
-+	  Set this to the number of serial ports you want the AMBA PL010 driver
-+	  to support.
-+
- config SERIAL_AMBA_PL010_CONSOLE
- 	bool "Support for console on AMBA serial port"
- 	depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-3.14/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-3.14/203-gpio_leds_brightness.patch
deleted file mode 100644
index ac16e9b6dc..0000000000
--- a/target/linux/adm5120/patches-3.14/203-gpio_leds_brightness.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -56,13 +56,17 @@ static void gpio_led_set(struct led_clas
- 		container_of(led_cdev, struct gpio_led_data, cdev);
- 	int level;
- 
--	if (value == LED_OFF)
--		level = 0;
--	else
--		level = 1;
--
--	if (led_dat->active_low)
--		level = !level;
-+	switch (value) {
-+	case LED_OFF:
-+		level = led_dat->active_low ? 1 : 0;
-+		break;
-+	case LED_FULL:
-+		level = led_dat->active_low ? 0 : 1;
-+		break;
-+	default:
-+		level = value;
-+		break;
-+	}
- 
- 	/* Setting GPIOs with I2C/etc requires a task context, and we don't
- 	 * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-3.14/310-adm5120_wdt.patch b/target/linux/adm5120/patches-3.14/310-adm5120_wdt.patch
deleted file mode 100644
index 4f3c012d97..0000000000
--- a/target/linux/adm5120/patches-3.14/310-adm5120_wdt.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1061,6 +1061,18 @@ config RC32434_WDT
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called rc32434_wdt.
- 
-+config ADM5120_WDT
-+	tristate "Infineon ADM5120 SoC hardware watchdog"
-+	depends on WATCHDOG && ADM5120
-+	help
-+	  This is a driver for hardware watchdog integrated in Infineon
-+	  ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+	  it doesn't freeze, and if it does, it reboots your computer after a
-+	  certain amount of time.
-+
-+	  To compile this driver as a module, choose M here: the module will be
-+	  called adm5120_wdt.
-+
- config INDYDOG
- 	tristate "Indy/I2 Hardware Watchdog"
- 	depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -127,6 +127,7 @@ obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
- obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
- obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o